From: Felix Fietkau Date: Tue, 1 Mar 2016 21:32:22 +0000 (+0000) Subject: iw: update to version 4.3, sync with trunk r47782 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=74c86694840573512adeac899918758c5e1d7871;p=openwrt%2Fsvn-archive%2Fopenwrt.git iw: update to version 4.3, sync with trunk r47782 Signed-off-by: Felix Fietkau SVN-Revision: 48870 --- diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile index 05ecd8adad..ad82081570 100644 --- a/package/network/utils/iw/Makefile +++ b/package/network/utils/iw/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=iw -PKG_VERSION:=3.17 +PKG_VERSION:=4.3 PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw -PKG_MD5SUM:=69c4a2f29cf560247febc6cad7161a72 +PKG_MD5SUM:=7adec72e91ebdd9c55429fa34a23a6f5 PKG_MAINTAINER:=Felix Fietkau PKG_LICENSE:=GPL-2.0 diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 03a3d38c66..7de225859b 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,672 +1,111 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -25,10 +25,30 @@ - * - */ - -+/* -+ * This header file defines the userspace API to the wireless stack. Please -+ * be careful not to break things - i.e. don't move anything around or so -+ * unless you can demonstrate that it breaks neither API nor ABI. -+ * -+ * Additions to the API should be accompanied by actual implementations in -+ * an upstream driver, so that example implementations exist in case there -+ * are ever concerns about the precise semantics of the API or changes are -+ * needed, and to ensure that code for dead (no longer implemented) API -+ * can actually be identified and removed. -+ * Nonetheless, semantics should also be documented carefully in this file. -+ */ -+ - #include - - #define NL80211_GENL_NAME "nl80211" - -+#define NL80211_MULTICAST_GROUP_CONFIG "config" -+#define NL80211_MULTICAST_GROUP_SCAN "scan" -+#define NL80211_MULTICAST_GROUP_REG "regulatory" -+#define NL80211_MULTICAST_GROUP_MLME "mlme" -+#define NL80211_MULTICAST_GROUP_VENDOR "vendor" -+#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" -+ - /** - * DOC: Station handling - * -@@ -173,8 +193,8 @@ - * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. - * - * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; -- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get -- * on an %NL80211_ATTR_IFINDEX is supported. -+ * either a dump request for all interfaces or a specific get with a -+ * single %NL80211_ATTR_IFINDEX is supported. - * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires - * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. - * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response -@@ -227,7 +247,11 @@ - * the interface identified by %NL80211_ATTR_IFINDEX. - * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC - * or, if no MAC address given, all stations, on the interface identified -- * by %NL80211_ATTR_IFINDEX. -+ * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and -+ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type -+ * of disconnection indication should be sent to the station -+ * (Deauthentication or Disassociation frame and reason code for that -+ * frame). - * - * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to - * destination %NL80211_ATTR_MAC on the interface identified by -@@ -248,7 +272,18 @@ - * %NL80211_ATTR_IFINDEX. - * - * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set -- * regulatory domain. -+ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device -+ * has a private regulatory domain, it will be returned. Otherwise, the -+ * global regdomain will be returned. -+ * A device will have a private regulatory domain if it uses the -+ * regulatory_hint() API. Even when a private regdomain is used the channel -+ * information will still be mended according to further hints from -+ * the regulatory core to help with compliance. A dump version of this API -+ * is now available which will returns the global regdomain as well as -+ * all private regdomains of present wiphys (for those that have it). -+ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then -+ * its private regdomain is the only valid one for it. The regulatory -+ * core is not used to help with compliance in this case. - * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command - * after being queried by the kernel. CRDA replies by sending a regulatory - * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our -@@ -302,7 +337,9 @@ - * if passed, define which channels should be scanned; if not - * passed, all channels allowed for the current regulatory domain - * are used. Extra IEs can also be passed from the userspace by -- * using the %NL80211_ATTR_IE attribute. -+ * using the %NL80211_ATTR_IE attribute. The first cycle of the -+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY -+ * is supplied. - * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if - * scheduled scan is not running. The caller may assume that as soon - * as the call returns, it is safe to start a new scheduled scan again. -@@ -639,7 +676,18 @@ - * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels - * independently of the userspace SME, send this event indicating - * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the -- * attributes determining channel width. -+ * attributes determining channel width. This indication may also be -+ * sent when a remotely-initiated switch (e.g., when a STA receives a CSA -+ * from the remote AP) is completed; -+ * -+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch -+ * has been started on an interface, regardless of the initiator -+ * (ie. whether it was requested from a remote device or -+ * initiated on our own). It indicates that -+ * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ -+ * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may -+ * decide to react to this indication by requesting other -+ * interfaces to change channel as well. - * - * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by - * its %NL80211_ATTR_WDEV identifier. It must have been created with -@@ -738,6 +786,31 @@ - * before removing a station entry entirely, or before disassociating - * or similar, cleanup will happen in the driver/device in this case. - * -+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to -+ * destination %NL80211_ATTR_MAC on the interface identified by -+ * %NL80211_ATTR_IFINDEX. -+ * -+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and -+ * bandwidth of a channel must be given. -+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the -+ * network is determined by the network interface. -+ * -+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, -+ * identified by the %NL80211_ATTR_MAC parameter. A target channel is -+ * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining -+ * channel width/type. The target operating class is given via -+ * %NL80211_ATTR_OPER_CLASS. -+ * The driver is responsible for continually initiating channel-switching -+ * operations and returning to the base channel for communication with the -+ * AP. -+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS -+ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel -+ * when this command completes. -+ * -+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used -+ * as an event to indicate changes for devices with wiphy-specific regdom -+ * management. -+ * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use - */ -@@ -912,6 +985,18 @@ enum nl80211_commands { - NL80211_CMD_ADD_TX_TS, - NL80211_CMD_DEL_TX_TS, - -+ NL80211_CMD_GET_MPP, -+ -+ NL80211_CMD_JOIN_OCB, -+ NL80211_CMD_LEAVE_OCB, -+ -+ NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, -+ -+ NL80211_CMD_TDLS_CHANNEL_SWITCH, -+ NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, -+ -+ NL80211_CMD_WIPHY_REG_CHANGE, -+ - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ -@@ -1606,9 +1691,16 @@ enum nl80211_commands { - * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. - * As specified in the &enum nl80211_tdls_peer_capability. - * -- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface -+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface - * creation then the new interface will be owned by the netlink socket -- * that created it and will be destroyed when the socket is closed -+ * that created it and will be destroyed when the socket is closed. -+ * If set during scheduled scan start then the new scan req will be -+ * owned by the netlink socket that created it and the scheduled scan will -+ * be stopped when the socket is closed. -+ * If set during configuration of regulatory indoor operation then the -+ * regulatory indoor configuration would be owned by the netlink socket -+ * that configured the indoor setting, and the indoor operation would be -+ * cleared when the socket is closed. - * - * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is - * the TDLS link initiator. -@@ -1638,6 +1730,40 @@ enum nl80211_commands { - * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see - * &enum nl80211_smps_mode. - * -+ * @NL80211_ATTR_OPER_CLASS: operating class -+ * -+ * @NL80211_ATTR_MAC_MASK: MAC address mask -+ * -+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device -+ * is self-managing its regulatory information and any regulatory domain -+ * obtained from it is coming from the device's wiphy and not the global -+ * cfg80211 regdomain. -+ * -+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte -+ * array. The feature flags are identified by their bit index (see &enum -+ * nl80211_ext_feature_index). The bit index is ordered starting at the -+ * least-significant bit of the first byte in the array, ie. bit index 0 -+ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 -+ * of byte 3 (u8 array). -+ * -+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be -+ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY -+ * may return a survey entry without a channel indicating global radio -+ * statistics (only some values are valid and make sense.) -+ * For devices that don't return such an entry even then, the information -+ * should be contained in the result as the sum of the respective counters -+ * over all channels. -+ * -+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a -+ * WoWLAN net-detect scan) is started, u32 in seconds. -+ -+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device -+ * is operating in an indoor environment. +@@ -10,6 +10,7 @@ + * Copyright 2008, 2009 Luis R. Rodriguez + * Copyright 2008 Jouni Malinen + * Copyright 2008 Colin McCabe ++ * Copyright 2015 Intel Deutschland GmbH + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -328,7 +329,15 @@ + * partial scan results may be available + * + * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain +- * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. ++ * intervals and certain number of cycles, as specified by ++ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is ++ * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, ++ * scheduled scan will run in an infinite loop with the specified interval. ++ * These attributes are mutually exculsive, ++ * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if ++ * NL80211_ATTR_SCHED_SCAN_PLANS is defined. ++ * If for some reason scheduled scan is aborted by the driver, all scan ++ * plans are canceled (including scan plans that did not start yet). + * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) + * are passed, they are used in the probe requests. For + * broadcast, a broadcast SSID must be passed (ie. an empty +@@ -1761,6 +1770,22 @@ enum nl80211_commands { + * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device + * is operating in an indoor environment. + * ++ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for ++ * scheduled scan supported by the device (u32), a wiphy attribute. ++ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for ++ * a scan plan (u32), a wiphy attribute. ++ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in ++ * a scan plan (u32), a wiphy attribute. ++ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. ++ * Each scan plan defines the number of scan iterations and the interval ++ * between scans. The last scan plan will always run infinitely, ++ * thus it must not specify the number of iterations, only the interval ++ * between scans. The scan plans are executed sequentially. ++ * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * -+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available + * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use - */ -@@ -1973,7 +2099,7 @@ enum nl80211_attrs { - - NL80211_ATTR_TDLS_PEER_CAPABILITY, +@@ -2130,6 +2155,13 @@ enum nl80211_attrs { -- NL80211_ATTR_IFACE_SOCKET_OWNER, -+ NL80211_ATTR_SOCKET_OWNER, + NL80211_ATTR_REG_INDOOR, - NL80211_ATTR_CSA_C_OFFSETS_TX, - NL80211_ATTR_MAX_CSA_COUNTERS, -@@ -1990,15 +2116,35 @@ enum nl80211_attrs { - - NL80211_ATTR_SMPS_MODE, - -+ NL80211_ATTR_OPER_CLASS, -+ -+ NL80211_ATTR_MAC_MASK, -+ -+ NL80211_ATTR_WIPHY_SELF_MANAGED_REG, -+ -+ NL80211_ATTR_EXT_FEATURES, -+ -+ NL80211_ATTR_SURVEY_RADIO_STATS, -+ -+ NL80211_ATTR_NETNS_FD, -+ -+ NL80211_ATTR_SCHED_SCAN_DELAY, -+ -+ NL80211_ATTR_REG_INDOOR, ++ NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, ++ NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, ++ NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, ++ NL80211_ATTR_SCHED_SCAN_PLANS, + + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -+ NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, - NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 - }; - - /* source-level API compatibility */ - #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION - #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG -+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER - - /* - * Allow user space programs to use #ifdef on new attributes by defining them -@@ -2028,7 +2174,7 @@ enum nl80211_attrs { - - #define NL80211_MAX_SUPP_RATES 32 - #define NL80211_MAX_SUPP_HT_RATES 77 --#define NL80211_MAX_SUPP_REG_RULES 32 -+#define NL80211_MAX_SUPP_REG_RULES 64 - #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 - #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 - #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 -@@ -2064,6 +2210,8 @@ enum nl80211_attrs { - * and therefore can't be created in the normal ways, use the - * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE - * commands to create and destroy one -+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS -+ * This mode corresponds to the MIB variable dot11OCBActivated=true - * @NL80211_IFTYPE_MAX: highest interface type number currently defined - * @NUM_NL80211_IFTYPES: number of defined interface types - * -@@ -2083,6 +2231,7 @@ enum nl80211_iftype { - NL80211_IFTYPE_P2P_CLIENT, - NL80211_IFTYPE_P2P_GO, - NL80211_IFTYPE_P2P_DEVICE, -+ NL80211_IFTYPE_OCB, - - /* keep last */ - NUM_NL80211_IFTYPES, -@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update { - * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) - * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) - * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate -- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate -+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the -+ * same as 160 for purposes of the bitrates - * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate -+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is -+ * a legacy rate and will be reported as the actual bitrate, i.e. -+ * half the base (20 MHz) rate -+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is -+ * a legacy rate and will be reported as the actual bitrate, i.e. -+ * a quarter of the base (20 MHz) rate - * @__NL80211_RATE_INFO_AFTER_LAST: internal use - */ - enum nl80211_rate_info { -@@ -2181,6 +2337,8 @@ enum nl80211_rate_info { - NL80211_RATE_INFO_80_MHZ_WIDTH, - NL80211_RATE_INFO_80P80_MHZ_WIDTH, - NL80211_RATE_INFO_160_MHZ_WIDTH, -+ NL80211_RATE_INFO_10_MHZ_WIDTH, -+ NL80211_RATE_INFO_5_MHZ_WIDTH, - - /* keep last */ - __NL80211_RATE_INFO_AFTER_LAST, -@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param { - * - * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved - * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) -- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) -- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) -- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) -- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) -+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) -+ * (u32, from this station) -+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) -+ * (u32, to this station) -+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) -+ * (u64, from this station) -+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) -+ * (u64, to this station) - * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) - * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute - * containing info as possible, see &enum nl80211_rate_info -- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) -- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this -- * station) -- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) -- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) -+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) -+ * (u32, from this station) -+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) -+ * (u32, to this station) -+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) -+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) -+ * (u32, to this station) - * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) - * @NL80211_STA_INFO_LLID: the station's mesh LLID - * @NL80211_STA_INFO_PLID: the station's mesh PLID -@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param { - * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. - * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the - * 802.11 header (u32, kbps) -+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons -+ * (u64) -+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) -+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average -+ * for beacons only (u8, dBm) -+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) -+ * This is a nested attribute where each the inner attribute number is the -+ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; -+ * each one of those is again nested with &enum nl80211_tid_stats -+ * attributes carrying the actual values. - * @__NL80211_STA_INFO_AFTER_LAST: internal - * @NL80211_STA_INFO_MAX: highest possible station info attribute +@@ -3364,6 +3396,9 @@ enum nl80211_bss_scan_width { + * (not present if no beacon frame has been received yet) + * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and + * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) ++ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry ++ * was last updated by a received frame. The value is expected to be ++ * accurate to about 10ms. (u64, nanoseconds) + * @__NL80211_BSS_AFTER_LAST: internal + * @NL80211_BSS_MAX: highest BSS attribute */ -@@ -2292,6 +2466,10 @@ enum nl80211_sta_info { - NL80211_STA_INFO_CHAIN_SIGNAL, - NL80211_STA_INFO_CHAIN_SIGNAL_AVG, - NL80211_STA_INFO_EXPECTED_THROUGHPUT, -+ NL80211_STA_INFO_RX_DROP_MISC, -+ NL80211_STA_INFO_BEACON_RX, -+ NL80211_STA_INFO_BEACON_SIGNAL_AVG, -+ NL80211_STA_INFO_TID_STATS, +@@ -3383,6 +3418,7 @@ enum nl80211_bss { + NL80211_BSS_CHAN_WIDTH, + NL80211_BSS_BEACON_TSF, + NL80211_BSS_PRESP_DATA, ++ NL80211_BSS_LAST_SEEN_BOOTTIME, /* keep last */ - __NL80211_STA_INFO_AFTER_LAST, -@@ -2299,6 +2477,31 @@ enum nl80211_sta_info { + __NL80211_BSS_AFTER_LAST, +@@ -4589,4 +4625,28 @@ enum nl80211_tdls_peer_capability { + NL80211_TDLS_PEER_WMM = 1<<2, }; - /** -+ * enum nl80211_tid_stats - per TID statistics attributes -+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved -+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) -+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or -+ * attempted to transmit; u64) -+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for -+ * transmitted MSDUs (not counting the first attempt; u64) -+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted -+ * MSDUs (u64) -+ * @NUM_NL80211_TID_STATS: number of attributes here -+ * @NL80211_TID_STATS_MAX: highest numbered attribute here ++/** ++ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan ++ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved ++ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In ++ * seconds (u32). ++ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this ++ * scan plan (u32). The last scan plan must not specify this attribute ++ * because it will run infinitely. A value of zero is invalid as it will ++ * make the scan plan meaningless. ++ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number ++ * currently defined ++ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use + */ -+enum nl80211_tid_stats { -+ __NL80211_TID_STATS_INVALID, -+ NL80211_TID_STATS_RX_MSDU, -+ NL80211_TID_STATS_TX_MSDU, -+ NL80211_TID_STATS_TX_MSDU_RETRIES, -+ NL80211_TID_STATS_TX_MSDU_FAILED, ++enum nl80211_sched_scan_plan { ++ __NL80211_SCHED_SCAN_PLAN_INVALID, ++ NL80211_SCHED_SCAN_PLAN_INTERVAL, ++ NL80211_SCHED_SCAN_PLAN_ITERATIONS, + + /* keep last */ -+ NUM_NL80211_TID_STATS, -+ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 ++ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, ++ NL80211_SCHED_SCAN_PLAN_MAX = ++ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 +}; + -+/** - * enum nl80211_mpath_flags - nl80211 mesh path flags - * - * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active -@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr { - * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated - * base on contiguous rules and wider channels will be allowed to cross - * multiple contiguous/overlapping frequency ranges. -+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT -+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation -+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation -+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed -+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed - */ - enum nl80211_reg_rule_flags { - NL80211_RRF_NO_OFDM = 1<<0, -@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags { - NL80211_RRF_NO_IR = 1<<7, - __NL80211_RRF_NO_IBSS = 1<<8, - NL80211_RRF_AUTO_BW = 1<<11, -+ NL80211_RRF_GO_CONCURRENT = 1<<12, -+ NL80211_RRF_NO_HT40MINUS = 1<<13, -+ NL80211_RRF_NO_HT40PLUS = 1<<14, -+ NL80211_RRF_NO_80MHZ = 1<<15, -+ NL80211_RRF_NO_160MHZ = 1<<16, - }; - - #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR - #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR - #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR -+#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ -+ NL80211_RRF_NO_HT40PLUS) - - /* For backport compatibility with older userspace */ - #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) -@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type { - * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel - * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) - * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used -- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio -- * spent on this channel -- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary -+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio -+ * was turned on (on channel or globally) -+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary - * channel was sensed busy (either due to activity or energy detect) -- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension -+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension - * channel was sensed busy -- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent -- * receiving data -- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent -- * transmitting data -+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent -+ * receiving data (on channel or globally) -+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent -+ * transmitting data (on channel or globally) -+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan -+ * (on this channel or globally) - * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number - * currently defined - * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use -@@ -2719,17 +2936,25 @@ enum nl80211_survey_info { - NL80211_SURVEY_INFO_FREQUENCY, - NL80211_SURVEY_INFO_NOISE, - NL80211_SURVEY_INFO_IN_USE, -- NL80211_SURVEY_INFO_CHANNEL_TIME, -- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, -- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, -- NL80211_SURVEY_INFO_CHANNEL_TIME_RX, -- NL80211_SURVEY_INFO_CHANNEL_TIME_TX, -+ NL80211_SURVEY_INFO_TIME, -+ NL80211_SURVEY_INFO_TIME_BUSY, -+ NL80211_SURVEY_INFO_TIME_EXT_BUSY, -+ NL80211_SURVEY_INFO_TIME_RX, -+ NL80211_SURVEY_INFO_TIME_TX, -+ NL80211_SURVEY_INFO_TIME_SCAN, - - /* keep last */ - __NL80211_SURVEY_INFO_AFTER_LAST, - NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 - }; - -+/* keep old names for compatibility */ -+#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME -+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY -+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY -+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX -+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX -+ - /** - * enum nl80211_mntr_flags - monitor configuration flags - * -@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode { - * - * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've - * established peering with for longer than this time (in seconds), then -- * remove it from the STA's list of peers. Default is 30 minutes. -+ * remove it from the STA's list of peers. You may set this to 0 to disable -+ * the removal of the STA. Default is 30 minutes. - * - * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use - */ -@@ -3166,6 +3392,9 @@ enum nl80211_bss { - /** - * enum nl80211_bss_status - BSS "status" - * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. -+ * Note that this is no longer used since cfg80211 no longer -+ * keeps track of whether or not authentication was done with -+ * a given BSS. - * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. - * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. - * -@@ -3379,6 +3608,8 @@ enum nl80211_ps_state { - * interval in which %NL80211_ATTR_CQM_TXE_PKTS and - * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an - * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. -+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon -+ * loss event - * @__NL80211_ATTR_CQM_AFTER_LAST: internal - * @NL80211_ATTR_CQM_MAX: highest key attribute - */ -@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm { - NL80211_ATTR_CQM_TXE_RATE, - NL80211_ATTR_CQM_TXE_PKTS, - NL80211_ATTR_CQM_TXE_INTVL, -+ NL80211_ATTR_CQM_BEACON_LOSS_EVENT, - - /* keep last */ - __NL80211_ATTR_CQM_AFTER_LAST, -@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm { - * configured threshold - * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the - * configured threshold -- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. -- * (Note that deauth/disassoc will still follow if the AP is not -- * available. This event might get used as roaming event, etc.) -+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) - */ - enum nl80211_cqm_rssi_threshold_event { - NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, -@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support { - * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put - * the chip into a special state -- works best with chips that have - * support for low-power operation already (flag) -+ * Note that this mode is incompatible with all of the others, if -+ * any others are even supported by the device. - * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect - * is detected is implementation-specific (flag) - * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed -@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support { - * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, - * the TCP connection ran out of tokens to use for data to send to the - * service -+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network -+ * is detected. This is a nested attribute that contains the -+ * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It -+ * specifies how the scan is performed (e.g. the interval, the -+ * channels to scan and the initial delay) as well as the scan -+ * results that will trigger a wake (i.e. the matchsets). This -+ * attribute is also sent in a response to -+ * @NL80211_CMD_GET_WIPHY, indicating the number of match sets -+ * supported by the driver (u32). -+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute -+ * containing an array with information about what triggered the -+ * wake up. If no elements are present in the array, it means -+ * that the information is not available. If more than one -+ * element is present, it means that more than one match -+ * occurred. -+ * Each element in the array is a nested attribute that contains -+ * one optional %NL80211_ATTR_SSID attribute and one optional -+ * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of -+ * these attributes must be present. If -+ * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one -+ * frequency, it means that the match occurred in more than one -+ * channel. - * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers - * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number - * -@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers { - NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, - NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, - NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, -+ NL80211_WOWLAN_TRIG_NET_DETECT, -+ NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, - - /* keep last */ - NUM_NL80211_WOWLAN_TRIG, -@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features { - * multiplexing powersave, ie. can turn off all but one chain - * and then wake the rest up as required after, for example, - * rts/cts handshake. -+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM -+ * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS -+ * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it -+ * needs to be able to handle Block-Ack agreements and other things. -+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring -+ * the vif's MAC address upon creation. -+ * See 'macaddr' field in the vif_params (cfg80211.h). -+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when -+ * operating as a TDLS peer. -+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a -+ * random MAC address during scan (if the device is unassociated); the -+ * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC -+ * address mask/value will be used. -+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports -+ * using a random MAC address for every scan iteration during scheduled -+ * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may -+ * be set for scheduled scan and the MAC address mask/value will be used. -+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a -+ * random MAC address for every scan iteration during "net detect", i.e. -+ * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may -+ * be set for scheduled scan and the MAC address mask/value will be used. - */ - enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, -@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags { - NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, - NL80211_FEATURE_STATIC_SMPS = 1 << 24, - NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, -+ NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, -+ NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, -+ NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, -+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, -+ NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, -+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31, -+}; -+ -+/** -+ * enum nl80211_ext_feature_index - bit index of extended features. -+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. -+ * -+ * @NUM_NL80211_EXT_FEATURES: number of extended features. -+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index. -+ */ -+enum nl80211_ext_feature_index { -+ NL80211_EXT_FEATURE_VHT_IBSS, -+ -+ /* add new features before the definition below */ -+ NUM_NL80211_EXT_FEATURES, -+ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 - }; - - /** -@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason { - * dangerous because will destroy stations performance as a lot of frames - * will be lost while scanning off-channel, therefore it must be used only - * when really needed -+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or -+ * for scheduled scan: a different one for every scan iteration). When the -+ * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and -+ * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only -+ * the masked bits will be preserved from the MAC address and the remainder -+ * randomised. If the attributes are not given full randomisation (46 bits, -+ * locally administered 1, multicast 0) is assumed. -+ * This flag must not be requested when the feature isn't supported, check -+ * the nl80211 feature flags for the device. - */ - enum nl80211_scan_flags { - NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, - NL80211_SCAN_FLAG_FLUSH = 1<<1, - NL80211_SCAN_FLAG_AP = 1<<2, -+ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, - }; - - /** + #endif /* __LINUX_NL80211_H */ diff --git a/package/network/utils/iw/patches/120-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch index cf6a3fa221..6a45c70b80 100644 --- a/package/network/utils/iw/patches/120-antenna_gain.patch +++ b/package/network/utils/iw/patches/120-antenna_gain.patch @@ -1,12 +1,11 @@ --- a/phy.c +++ b/phy.c -@@ -495,3 +495,31 @@ COMMAND(set, antenna, " | all | +@@ -524,3 +524,30 @@ COMMAND(set, antenna, " | all | NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna, "Set a bitmap of allowed antennas to use for TX and RX.\n" "The driver may reject antenna configurations it cannot support."); + +static int handle_antenna_gain(struct nl80211_state *state, -+ struct nl_cb *cb, + struct nl_msg *msg, + int argc, char **argv, + enum id_input id) diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch index 882cf89f8d..dea24fb495 100644 --- a/package/network/utils/iw/patches/200-reduce_size.patch +++ b/package/network/utils/iw/patches/200-reduce_size.patch @@ -2,18 +2,56 @@ +++ b/Makefile @@ -15,8 +15,8 @@ CFLAGS += -Wall -Wundef -Wstrict-prototy OBJS = iw.o genl.o event.o info.o phy.o \ - interface.o ibss.o station.o survey.o util.o \ - mesh.o mpath.o scan.o reg.o version.o \ + interface.o ibss.o station.o survey.o util.o ocb.o \ + mesh.o mpath.o mpp.o scan.o reg.o version.o \ - reason.o status.o connect.o link.o offch.o ps.o cqm.o \ -- bitrate.o wowlan.o coalesce.o roc.o p2p.o -+ reason.o status.o connect.o link.o ps.o \ -+ bitrate.o +- bitrate.o wowlan.o coalesce.o roc.o p2p.o vendor.o ++ reason.o status.o link.o offch.o ps.o cqm.o \ ++ bitrate.o vendor.o OBJS += sections.o OBJS-$(HWSIM) += hwsim.o +--- a/event.c ++++ b/event.c +@@ -342,6 +342,7 @@ static int print_event(struct nl_msg *ms + } + + switch (gnlh->cmd) { ++#if 0 + case NL80211_CMD_NEW_WIPHY: + printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME])); + break; +@@ -376,6 +377,7 @@ static int print_event(struct nl_msg *ms + case NL80211_CMD_SCHED_SCAN_RESULTS: + printf("got scheduled scan results\n"); + break; ++#endif + case NL80211_CMD_REG_CHANGE: + printf("regulatory domain change: "); + +@@ -454,6 +456,7 @@ static int print_event(struct nl_msg *ms + mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC])); + printf("del station %s\n", macbuf); + break; ++#if 0 + case NL80211_CMD_JOIN_IBSS: + mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC])); + printf("IBSS %s joined\n", macbuf); +@@ -610,9 +613,9 @@ static int print_event(struct nl_msg *ms + case NL80211_CMD_DEL_WIPHY: + printf("delete wiphy\n"); + break; ++#endif + default: +- printf("unknown event %d (%s)\n", +- gnlh->cmd, command_name(gnlh->cmd)); ++ printf("unknown event %d\n", gnlh->cmd); + break; + } + --- a/info.c +++ b/info.c -@@ -207,6 +207,7 @@ next: +@@ -219,6 +219,7 @@ next: } } @@ -21,7 +59,7 @@ if (tb_band[NL80211_BAND_ATTR_RATES]) { printf("\t\tBitrates (non-HT):\n"); nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) { -@@ -223,6 +224,7 @@ next: +@@ -235,6 +236,7 @@ next: printf("\n"); } } @@ -29,7 +67,7 @@ } } -@@ -273,6 +275,7 @@ next: +@@ -291,6 +293,7 @@ next: printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage); } @@ -37,7 +75,7 @@ if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) { int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32); int i; -@@ -284,6 +287,7 @@ next: +@@ -302,6 +305,7 @@ next: cipher_name(ciphers[i])); } } @@ -45,7 +83,7 @@ if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] && tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX]) -@@ -303,11 +307,13 @@ next: +@@ -321,11 +325,13 @@ next: printf("\t\t * %s\n", iftype_name(nla_type(nl_mode))); } @@ -59,7 +97,7 @@ if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) { struct nlattr *nl_combi; -@@ -404,6 +410,7 @@ broken_combination: +@@ -422,6 +428,7 @@ broken_combination: printf("\tinterface combinations are not supported\n"); } @@ -67,7 +105,7 @@ if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) { printf("\tSupported commands:\n"); nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd) -@@ -496,6 +503,7 @@ broken_combination: +@@ -518,6 +525,7 @@ broken_combination: printf("\t\t * wake up on TCP connection\n"); } } @@ -75,7 +113,7 @@ if (tb_msg[NL80211_ATTR_ROAM_SUPPORT]) printf("\tDevice supports roaming.\n"); -@@ -532,6 +540,7 @@ broken_combination: +@@ -554,6 +562,7 @@ broken_combination: } } @@ -83,23 +121,23 @@ if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) { unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]); -@@ -584,6 +593,7 @@ broken_combination: - if (features & NL80211_FEATURE_DYNAMIC_SMPS) - printf("\tDevice supports dynamic SMPS\n"); +@@ -612,6 +621,7 @@ broken_combination: + if (features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) + printf("\tDevice supports TDLS channel switching\n"); } +#endif - if (tb_msg[NL80211_ATTR_TDLS_SUPPORT]) - printf("\tDevice supports T-DLS.\n"); -@@ -633,6 +643,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP + if (tb_msg[NL80211_ATTR_EXT_FEATURES]) { + struct nlattr *tb = tb_msg[NL80211_ATTR_EXT_FEATURES]; +@@ -668,6 +678,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP "List all wireless devices and their capabilities."); TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL); +#if 0 - static int handle_commands(struct nl80211_state *state, - struct nl_cb *cb, struct nl_msg *msg, + static int handle_commands(struct nl80211_state *state, struct nl_msg *msg, int argc, char **argv, enum id_input id) -@@ -645,6 +656,7 @@ static int handle_commands(struct nl8021 + { +@@ -679,6 +690,7 @@ static int handle_commands(struct nl8021 } TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands, "list all known commands and their decimal & hex value"); @@ -107,3 +145,111 @@ static int print_feature_handler(struct nl_msg *msg, void *arg) { +--- a/scan.c ++++ b/scan.c +@@ -1081,6 +1081,7 @@ static void print_ht_op(const uint8_t ty + printf("\t\t * secondary channel offset: %s\n", + ht_secondary_offset[data[1] & 0x3]); + printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]); ++ return; + printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3); + printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]); + printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2); +@@ -1312,6 +1313,13 @@ static void print_ie(const struct ie_pri + + static const struct ie_print ieprinters[] = { + [0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, ++ [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), }, ++ [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), }, ++ [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), }, ++ [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), }, ++ [191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), }, ++ [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), }, ++#if 0 + [1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, + [3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), }, + [5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), }, +@@ -1321,14 +1329,8 @@ static const struct ie_print ieprinters[ + [32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), }, + [35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), }, + [42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), }, +- [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), }, + [47] = { "ERP D4.0", print_erp, 1, 255, BIT(PRINT_SCAN), }, + [74] = { "Overlapping BSS scan params", print_obss_scan_params, 14, 255, BIT(PRINT_SCAN), }, +- [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), }, +- [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), }, +- [191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), }, +- [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), }, +- [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), }, + [50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), }, + [113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), }, + [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), }, +@@ -1336,6 +1338,7 @@ static const struct ie_print ieprinters[ + [107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), }, + [108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), }, + [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), }, ++#endif + }; + + static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data) +@@ -1767,6 +1770,7 @@ void print_ies(unsigned char *ie, int ie + ieprinters[ie[0]].name && + ieprinters[ie[0]].flags & BIT(ptype)) { + print_ie(&ieprinters[ie[0]], ie[0], ie[1], ie + 2); ++#if 0 + } else if (ie[0] == 221 /* vendor */) { + print_vendor(ie[1], ie + 2, unknown, ptype); + } else if (unknown) { +@@ -1776,6 +1780,7 @@ void print_ies(unsigned char *ie, int ie + for (i=0; i 45000) + is_dmg = true; ++#endif + } + if (bss[NL80211_BSS_BEACON_INTERVAL]) + printf("\tbeacon interval: %d TUs\n", +--- a/util.c ++++ b/util.c +@@ -267,6 +267,7 @@ static const char *commands[NL80211_CMD_ + + static char cmdbuf[100]; + ++#if 0 + const char *command_name(enum nl80211_commands cmd) + { + if (cmd <= NL80211_CMD_MAX && commands[cmd]) +@@ -274,6 +275,7 @@ const char *command_name(enum nl80211_co + sprintf(cmdbuf, "Unknown command (%d)", cmd); + return cmdbuf; + } ++#endif + + int ieee80211_channel_to_frequency(int chan, enum nl80211_band band) + { diff --git a/package/network/utils/iw/patches/300-display_interface_TX_power.patch b/package/network/utils/iw/patches/300-display_interface_TX_power.patch new file mode 100644 index 0000000000..574c490318 --- /dev/null +++ b/package/network/utils/iw/patches/300-display_interface_TX_power.patch @@ -0,0 +1,32 @@ +From: =?utf-8?q?Rafa=C5=82_Mi=C5=82ecki?= +Date: Tue, 1 Sep 2015 09:55:52 +0200 +Subject: iw: display interface TX power if available +MIME-Version: 1.0 +Content-Type: text/plain; charset="utf-8" +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +[print dBm] +Signed-off-by: Johannes Berg +--- + interface.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/interface.c b/interface.c +index 73ccecd..4f0821d 100644 +--- a/interface.c ++++ b/interface.c +@@ -368,6 +368,13 @@ static int print_iface_handler(struct nl_msg *msg, void *arg) + printf("\n"); + } + ++ if (tb_msg[NL80211_ATTR_WIPHY_TX_POWER_LEVEL]) { ++ uint32_t txp = nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_TX_POWER_LEVEL]); ++ ++ printf("%s\ttxpower %d.%.2d dBm\n", ++ indent, txp / 100, txp % 100); ++ } ++ + return NL_SKIP; + } + diff --git a/package/network/utils/iw/patches/301-ibss_add_VHT80.patch b/package/network/utils/iw/patches/301-ibss_add_VHT80.patch new file mode 100644 index 0000000000..709fbb2914 --- /dev/null +++ b/package/network/utils/iw/patches/301-ibss_add_VHT80.patch @@ -0,0 +1,104 @@ +From: "Janusz.Dziedzic@tieto.com" +Date: Thu, 10 Sep 2015 12:04:13 +0200 +Subject: ibss: add VHT80 support for IBSS + +Add VHT80 support for IBSS. + +eg. iw wlan0 ibss join 5180 80MHZ + iw wlan0 ibbs join 5220 80MHZ + +Signed-off-by: Janusz Dziedzic +[fix formatting] +Signed-off-by: Johannes Berg +--- + ibss.c | 49 +++++++++++++++++++++++++++++++++++++++++-------- + 1 file changed, 41 insertions(+), 8 deletions(-) + +diff --git a/ibss.c b/ibss.c +index 7a0b707..a99a262 100644 +--- a/ibss.c ++++ b/ibss.c +@@ -16,6 +16,39 @@ + + SECTION(ibss); + ++struct chanmode { ++ const char *name; ++ unsigned int width; ++ int freq1_diff; ++ int chantype; /* for older kernel */ ++}; ++ ++static int get_cf1(const struct chanmode *chanmode, unsigned long freq) ++{ ++ int cf1 = freq, j; ++ int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 }; ++ ++ switch (chanmode->width) { ++ case NL80211_CHAN_WIDTH_80: ++ /* setup center_freq1 */ ++ for (j = 0; j < ARRAY_SIZE(vht80); j++) { ++ if (freq >= vht80[j] && freq < vht80[j] + 80) ++ break; ++ } ++ ++ if (j == ARRAY_SIZE(vht80)) ++ break; ++ ++ cf1 = vht80[j] + 30; ++ break; ++ default: ++ cf1 = freq + chanmode->freq1_diff; ++ break; ++ } ++ ++ return cf1; ++} ++ + static int join_ibss(struct nl80211_state *state, + struct nl_msg *msg, + int argc, char **argv, +@@ -30,12 +63,8 @@ static int join_ibss(struct nl80211_state *state, + int bintval; + int i; + unsigned long freq; +- static const struct { +- const char *name; +- unsigned int width; +- int freq1_diff; +- int chantype; /* for older kernel */ +- } *chanmode_selected = NULL, chanmode[] = { ++ const struct chanmode *chanmode_selected = NULL; ++ static const struct chanmode chanmode[] = { + { .name = "HT20", + .width = NL80211_CHAN_WIDTH_20, + .freq1_diff = 0, +@@ -60,6 +89,10 @@ static int join_ibss(struct nl80211_state *state, + .width = NL80211_CHAN_WIDTH_10, + .freq1_diff = 0, + .chantype = -1 }, ++ { .name = "80MHZ", ++ .width = NL80211_CHAN_WIDTH_80, ++ .freq1_diff = 0, ++ .chantype = -1 }, + }; + + if (argc < 2) +@@ -90,7 +123,7 @@ static int join_ibss(struct nl80211_state *state, + NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH, + chanmode_selected->width); + NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1, +- freq + chanmode_selected->freq1_diff); ++ get_cf1(chanmode_selected, freq)); + if (chanmode_selected->chantype != -1) + NLA_PUT_U32(msg, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, +@@ -192,7 +225,7 @@ COMMAND(ibss, leave, NULL, + NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss, + "Leave the current IBSS cell."); + COMMAND(ibss, join, +- " [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ] [fixed-freq] [] [beacon-interval ]" ++ " [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ|80MHZ] [fixed-freq] [] [beacon-interval ]" + " [basic-rates ] [mcast-rate ] " + "[key d:0:abcde]", + NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss, diff --git a/package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch b/package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch new file mode 100644 index 0000000000..fc4442792d --- /dev/null +++ b/package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch @@ -0,0 +1,41 @@ +From: Johannes Berg +Date: Fri, 18 Sep 2015 11:11:38 +0200 +Subject: ibss: use correct "MHz" instead of "MHZ" + +Signed-off-by: Johannes Berg +--- + ibss.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +diff --git a/ibss.c b/ibss.c +index a99a262..23bda70 100644 +--- a/ibss.c ++++ b/ibss.c +@@ -81,15 +81,15 @@ static int join_ibss(struct nl80211_state *state, + .width = NL80211_CHAN_WIDTH_20_NOHT, + .freq1_diff = 0, + .chantype = NL80211_CHAN_NO_HT }, +- { .name = "5MHZ", ++ { .name = "5MHz", + .width = NL80211_CHAN_WIDTH_5, + .freq1_diff = 0, + .chantype = -1 }, +- { .name = "10MHZ", ++ { .name = "10MHz", + .width = NL80211_CHAN_WIDTH_10, + .freq1_diff = 0, + .chantype = -1 }, +- { .name = "80MHZ", ++ { .name = "80MHz", + .width = NL80211_CHAN_WIDTH_80, + .freq1_diff = 0, + .chantype = -1 }, +@@ -225,7 +225,7 @@ COMMAND(ibss, leave, NULL, + NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss, + "Leave the current IBSS cell."); + COMMAND(ibss, join, +- " [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ|80MHZ] [fixed-freq] [] [beacon-interval ]" ++ " [HT20|HT40+|HT40-|NOHT|5MHz|10MHz|80MHz] [fixed-freq] [] [beacon-interval ]" + " [basic-rates ] [mcast-rate ] " + "[key d:0:abcde]", + NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss, diff --git a/package/network/utils/iw/patches/303-mesh_add_VHT80.patch b/package/network/utils/iw/patches/303-mesh_add_VHT80.patch new file mode 100644 index 0000000000..fe8dc21a19 --- /dev/null +++ b/package/network/utils/iw/patches/303-mesh_add_VHT80.patch @@ -0,0 +1,170 @@ +From: Sven Eckelmann +Date: Tue, 24 Nov 2015 17:55:22 +0100 +Subject: iw: add VHT80 support for 802.11s + +Support next to the non-HT/HT channel widths like HT20 or NOHT also VHT80 +channels during the mesh join + + iw dev mesh0 mesh join "meshnet" freq 5180 80MHz + +Signed-off-by: Sven Eckelmann +--- + ibss.c | 33 --------------------------------- + iw.h | 9 +++++++++ + mesh.c | 16 ++++++++-------- + util.c | 26 ++++++++++++++++++++++++++ + 4 files changed, 43 insertions(+), 41 deletions(-) + +diff --git a/ibss.c b/ibss.c +index 23bda70..ac06fc5 100644 +--- a/ibss.c ++++ b/ibss.c +@@ -16,39 +16,6 @@ + + SECTION(ibss); + +-struct chanmode { +- const char *name; +- unsigned int width; +- int freq1_diff; +- int chantype; /* for older kernel */ +-}; +- +-static int get_cf1(const struct chanmode *chanmode, unsigned long freq) +-{ +- int cf1 = freq, j; +- int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 }; +- +- switch (chanmode->width) { +- case NL80211_CHAN_WIDTH_80: +- /* setup center_freq1 */ +- for (j = 0; j < ARRAY_SIZE(vht80); j++) { +- if (freq >= vht80[j] && freq < vht80[j] + 80) +- break; +- } +- +- if (j == ARRAY_SIZE(vht80)) +- break; +- +- cf1 = vht80[j] + 30; +- break; +- default: +- cf1 = freq + chanmode->freq1_diff; +- break; +- } +- +- return cf1; +-} +- + static int join_ibss(struct nl80211_state *state, + struct nl_msg *msg, + int argc, char **argv, +diff --git a/iw.h b/iw.h +index cef9da8..8e1a37a 100644 +--- a/iw.h ++++ b/iw.h +@@ -59,6 +59,13 @@ struct cmd { + const struct cmd *parent; + }; + ++struct chanmode { ++ const char *name; ++ unsigned int width; ++ int freq1_diff; ++ int chantype; /* for older kernel */ ++}; ++ + #define ARRAY_SIZE(ar) (sizeof(ar)/sizeof(ar[0])) + #define DIV_ROUND_UP(x, y) (((x) + (y - 1)) / (y)) + +@@ -174,6 +181,8 @@ void print_ies(unsigned char *ie, int ielen, bool unknown, + void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen); + void iw_hexdump(const char *prefix, const __u8 *data, size_t len); + ++int get_cf1(const struct chanmode *chanmode, unsigned long freq); ++ + #define SCHED_SCAN_OPTIONS "interval [delay ] " \ + "[freqs +] [matches [ssid ]+]] [active [ssid ]+|passive] [randomise[=/]]" + int parse_sched_scan(struct nl_msg *msg, int *argc, char ***argv); +diff --git a/mesh.c b/mesh.c +index 0090530..930d58f 100644 +--- a/mesh.c ++++ b/mesh.c +@@ -439,12 +439,8 @@ static int join_mesh(struct nl80211_state *state, + int bintval, dtim_period, i, n_rates = 0; + char *end, *value = NULL, *sptr = NULL; + unsigned long freq = 0; +- static const struct { +- const char *name; +- unsigned int width; +- int freq1_diff; +- int chantype; /* for older kernel */ +- } *chanmode_selected = NULL, chanmode[] = { ++ const struct chanmode *chanmode_selected = NULL; ++ static const struct chanmode chanmode[] = { + { .name = "HT20", + .width = NL80211_CHAN_WIDTH_20, + .freq1_diff = 0, +@@ -461,6 +457,10 @@ static int join_mesh(struct nl80211_state *state, + .width = NL80211_CHAN_WIDTH_20_NOHT, + .freq1_diff = 0, + .chantype = NL80211_CHAN_NO_HT }, ++ { .name = "80MHz", ++ .width = NL80211_CHAN_WIDTH_80, ++ .freq1_diff = 0, ++ .chantype = -1 }, + }; + + if (argc < 1) +@@ -497,7 +497,7 @@ static int join_mesh(struct nl80211_state *state, + NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH, + chanmode_selected->width); + NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1, +- freq + chanmode_selected->freq1_diff); ++ get_cf1(chanmode_selected, freq)); + if (chanmode_selected->chantype != -1) + NLA_PUT_U32(msg, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, +@@ -599,7 +599,7 @@ static int join_mesh(struct nl80211_state *state, + nla_put_failure: + return -ENOBUFS; + } +-COMMAND(mesh, join, " [[freq ]" ++COMMAND(mesh, join, " [[freq ]" + " [basic-rates ]], [mcast-rate ]" + " [beacon-interval