From: Marek Vasut Date: Fri, 17 May 2019 20:25:28 +0000 (+0200) Subject: ARM: imx: vining2000: Enable DM Serial X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=74ae372ae4cf260402c15197fc1ea40a0269747d;p=project%2Fbcm63xx%2Fu-boot.git ARM: imx: vining2000: Enable DM Serial Enable DM Serial support on iMX6SX VINING|2000. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Silvio Fricke Cc: Stefano Babic --- diff --git a/board/softing/vining_2000/vining_2000.c b/board/softing/vining_2000/vining_2000.c index d960773671..19b9b37276 100644 --- a/board/softing/vining_2000/vining_2000.c +++ b/board/softing/vining_2000/vining_2000.c @@ -71,11 +71,6 @@ int dram_init(void) return 0; } -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_GPIO1_IO04__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static iomux_v3_cfg_t const fec1_pads[] = { MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -97,11 +92,6 @@ static iomux_v3_cfg_t const pwm_led_pads[] = { MX6_PAD_RGMII2_RD3__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL), /* blue */ }; -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); -} - #define PHY_RESET IMX_GPIO_NR(5, 9) int board_eth_init(bd_t *bis) @@ -419,8 +409,6 @@ int board_late_init(void) int board_early_init_f(void) { - setup_iomux_uart(); - setup_iomux_usb(); return 0; diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index 0a2b042ed1..9e8326e771 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -49,6 +49,9 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_STORAGE=y diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index fd98c1417e..d4db9b4a56 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -17,9 +17,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \