From: Alex Date: Tue, 6 Dec 2016 18:56:51 +0000 (-0800) Subject: drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=74685b08fbb26ff5b8448fabe0941a53269dd33e;p=openwrt%2Fstaging%2Fblogic.git drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links Support for setting the RGMII_IDMODE bit was added in the commit referenced below. However, that commit did not add the symmetrical clearing of the bit by way of setting it in "mask". Add it here. Note that the documentation marks clearing this bit as "reserved", however, according to TI, support for delaying the clock does exist in the MAC, although it is not officially supported. We tested this on a board with an RGMII to RGMII link that will not work unless this bit is cleared. Fixes: 0fb26c3063ea ("drivers: net: cpsw-phy-sel: add support to configure rgmii internal delay") Signed-off-by: Alexandru Gagniuc Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c index ba1e45ff6aae..18013645e76c 100644 --- a/drivers/net/ethernet/ti/cpsw-phy-sel.c +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -81,6 +81,7 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv, }; mask = GMII_SEL_MODE_MASK << (slave * 2) | BIT(slave + 6); + mask |= BIT(slave + 4); mode <<= slave * 2; if (priv->rmii_clock_external) {