From: Emmanuel Grumbach Date: Mon, 27 Jan 2014 10:12:50 +0000 (+0200) Subject: iwlwifi: mvm: BT Coex - fix SYNC2SCO flags X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=741e703b58819d8e7c743a9cab7e2f98a1264a67;p=openwrt%2Fstaging%2Fblogic.git iwlwifi: mvm: BT Coex - fix SYNC2SCO flags The Sync to SCO is a feature that allows to synchronize between the WiFi traffic and the expectable BT traffic when SCO profile is active. We need to set the validity bit in the command in the init flow, and set / clear the enablement bit if we want to enabled / disable the feature. While at it, clean up the flags that are not used in the API. This feature needs to be enabled / disabled easily, so export its enablement to constants.h. Reviewed-by: Eyal Zolotov Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c index 9649a43c854d..38a54a3fde34 100644 --- a/drivers/net/wireless/iwlwifi/mvm/bt-coex.c +++ b/drivers/net/wireless/iwlwifi/mvm/bt-coex.c @@ -378,7 +378,6 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm) flags = iwlwifi_mod_params.bt_coex_active ? BT_COEX_NW : BT_COEX_DISABLE; - flags |= BT_CH_PRIMARY_EN | BT_CH_SECONDARY_EN | BT_SYNC_2_BT_DISABLE; bt_cmd->flags = cpu_to_le32(flags); bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_ENABLE | @@ -399,6 +398,9 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm) BT_VALID_TXRX_MAX_FREQ_0 | BT_VALID_SYNC_TO_SCO); + if (IWL_MVM_BT_COEX_SYNC2SCO) + bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO); + if (mvm->cfg->bt_shared_single_ant) memcpy(&bt_cmd->decision_lut, iwl_single_shared_ant, sizeof(iwl_single_shared_ant)); diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h index f3b96e44e690..2d133b1b2dde 100644 --- a/drivers/net/wireless/iwlwifi/mvm/constants.h +++ b/drivers/net/wireless/iwlwifi/mvm/constants.h @@ -81,5 +81,6 @@ #define IWL_MVM_LOWLAT_QUOTA_MIN_PERCENT 64 #define IWL_MVM_LOWLAT_SINGLE_BINDING_MAXDUR 24 /* TU */ #define IWL_MVM_LOWLAT_DUAL_BINDING_MAXDUR 24 /* TU */ +#define IWL_MVM_BT_COEX_SYNC2SCO 1 #endif /* __MVM_CONSTANTS_H */ diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h index 1b4e54d416b0..20b723d6270f 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h @@ -70,37 +70,24 @@ /** * enum iwl_bt_coex_flags - flags for BT_COEX command - * @BT_CH_PRIMARY_EN: - * @BT_CH_SECONDARY_EN: - * @BT_NOTIF_COEX_OFF: * @BT_COEX_MODE_POS: * @BT_COEX_MODE_MSK: * @BT_COEX_DISABLE: * @BT_COEX_2W: * @BT_COEX_3W: * @BT_COEX_NW: - * @BT_USE_DEFAULTS: - * @BT_SYNC_2_BT_DISABLE: - * @BT_COEX_CORUNNING_TBL_EN: + * @BT_COEX_SYNC2SCO: * * The COEX_MODE must be set for each command. Even if it is not changed. */ enum iwl_bt_coex_flags { - BT_CH_PRIMARY_EN = BIT(0), - BT_CH_SECONDARY_EN = BIT(1), - BT_NOTIF_COEX_OFF = BIT(2), BT_COEX_MODE_POS = 3, BT_COEX_MODE_MSK = BITS(3) << BT_COEX_MODE_POS, BT_COEX_DISABLE = 0x0 << BT_COEX_MODE_POS, BT_COEX_2W = 0x1 << BT_COEX_MODE_POS, BT_COEX_3W = 0x2 << BT_COEX_MODE_POS, BT_COEX_NW = 0x3 << BT_COEX_MODE_POS, - BT_USE_DEFAULTS = BIT(6), - BT_SYNC_2_BT_DISABLE = BIT(7), - BT_COEX_CORUNNING_TBL_EN = BIT(8), - BT_COEX_MPLUT_TBL_EN = BIT(9), - /* Bit 10 is reserved */ - BT_COEX_WF_PRIO_BOOST_CHECK_EN = BIT(11), + BT_COEX_SYNC2SCO = BIT(7), }; /*