From: Zoltan Herpai Date: Sat, 10 Jan 2015 19:56:30 +0000 (+0000) Subject: sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=741e0fd7a16bf8875ab10d7773bc8aed9b63d1d8;p=openwrt%2Fstaging%2Fynezz.git sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config of generic symbols Signed-off-by: Zoltan HERPAI SVN-Revision: 43922 --- diff --git a/target/linux/sunxi/config-3.18 b/target/linux/sunxi/config-3.18 index 44b5d89800..68f15939d7 100644 --- a/target/linux/sunxi/config-3.18 +++ b/target/linux/sunxi/config-3.18 @@ -129,12 +129,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_UART_8250 is not set # CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_IOSCHED="cfq" @@ -163,7 +157,6 @@ CONFIG_FRAME_WARN=2048 CONFIG_FREEZER=y CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y -CONFIG_GARP=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -250,7 +243,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_I2C_SUN6I_P2WI is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -# CONFIG_IMX_IPUV3_CORE is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_INPUT=y # CONFIG_INPUT_AXP20X_PEK is not set @@ -260,23 +252,15 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_TOUCHSCREEN=y -# CONFIG_INTEL_SOC_PMIC is not set CONFIG_IOMMU_HELPER=y CONFIG_IOSCHED_CFQ=y CONFIG_IPC_NS=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_BOOTP is not set -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_RARP is not set CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_WORK=y CONFIG_JBD2=y CONFIG_KALLSYMS=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set CONFIG_KERNFS=y # CONFIG_KEYBOARD_GPIO is not set CONFIG_KEYBOARD_SUN4I_LRADC=y @@ -390,12 +374,6 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_RCU_BOOST is not set CONFIG_RCU_CPU_STALL_VERBOSE=y CONFIG_RCU_STALL_COMMON=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_IRQ=y @@ -417,6 +395,7 @@ CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SCHED_HRTICK=y CONFIG_SCSI=y CONFIG_SDIO_UART=y +# CONFIG_SECCOMP is not set CONFIG_SECURITYFS=y # CONFIG_SENSORS_PWM_FAN is not set CONFIG_SERIAL_8250_DW=y @@ -456,24 +435,10 @@ CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_TASK_XACCT=y -# CONFIG_TCP_CONG_ADVANCED is not set # CONFIG_THUMB2_KERNEL is not set CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_TOUCHSCREEN_AR1021_I2C is not set -# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set -# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set -# CONFIG_TOUCHSCREEN_BU21013 is not set -# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set -# CONFIG_TOUCHSCREEN_DYNAPRO is not set -# CONFIG_TOUCHSCREEN_EGALAX is not set -# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set -# CONFIG_TOUCHSCREEN_MAX11801 is not set -# CONFIG_TOUCHSCREEN_PIXCIR is not set -# CONFIG_TOUCHSCREEN_ST1232 is not set CONFIG_TOUCHSCREEN_SUN4I=y -# CONFIG_TOUCHSCREEN_TSC2005 is not set -# CONFIG_TOUCHSCREEN_TSC_SERIO is not set CONFIG_TREE_PREEMPT_RCU=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_UID16=y @@ -496,7 +461,6 @@ CONFIG_UTS_NS=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_VFP=y CONFIG_VFPv3=y -CONFIG_VLAN_8021Q_GVRP=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_VT=y CONFIG_VT_CONSOLE=y @@ -509,10 +473,6 @@ CONFIG_XPS=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_X86=y CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/sunxi/patches-3.18/301-add-bananapro.diff b/target/linux/sunxi/patches-3.18/301-add-bananapro.diff deleted file mode 100644 index 47454e974e..0000000000 --- a/target/linux/sunxi/patches-3.18/301-add-bananapro.diff +++ /dev/null @@ -1,247 +0,0 @@ -diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile ---- old/arch/arm/boot/dts/Makefile 2015-01-06 09:29:23.612462619 +0100 -+++ new/arch/arm/boot/dts/Makefile 2015-01-06 09:29:36.316254352 +0100 -@@ -436,6 +436,7 @@ - sun6i-a31-m9.dtb - dtb-$(CONFIG_MACH_SUN7I) += \ - sun7i-a20-bananapi.dtb \ -+ sun7i-a20-bananapro.dtb \ - sun7i-a20-cubieboard2.dtb \ - sun7i-a20-cubietruck.dtb \ - sun7i-a20-hummingbird.dtb \ -diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/sun7i-a20-bananapro.dts ---- old/arch/arm/boot/dts/sun7i-a20-bananapro.dts 1970-01-01 01:00:00.000000000 +0100 -+++ new/arch/arm/boot/dts/sun7i-a20-bananapro.dts 2015-01-06 09:31:18.290582574 +0100 -@@ -0,0 +1,232 @@ -+/* -+ * Copyright 2014 Zoltan HERPAI -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public -+ * License along with this library; if not, write to the Free -+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, -+ * MA 02110-1301 USA -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+/include/ "sun7i-a20.dtsi" -+/include/ "sunxi-common-regulators.dtsi" -+ -+/ { -+ model = "LeMaker Banana Pro"; -+ compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; -+ -+ soc@01c00000 { -+ spi0: spi@01c05000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi0_pins_a>; -+ status = "okay"; -+ }; -+ -+ mmc0: mmc@01c0f000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 7 10 0>; /* PH10 */ -+ cd-inverted; -+ status = "okay"; -+ }; -+ -+ mmc3: mmc@01c12000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc3_pins_a> -+ vmmc-supply = <®_vmmc3>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ brcmf: bcrmf@1 { -+ reg = <1>; -+ ccompatible = "brcm,bcm4329-fmac"; -+ interrupt-parent = <&pio>; -+ interrupts = <10 8>; /* PH10 / EINT10 * taken from https://github.com/Bananian/fex/blob/master/BananaPro/BananaPro.fex.otg-off */ -+ interrupt-names = "host-wake"; -+ }; -+ }; -+ -+ usbphy: phy@01c13400 { -+ usb1_vbus-supply = <®_usb1_vbus>; -+ usb2_vbus-supply = <®_usb2_vbus>; -+ status = "okay"; -+ }; -+ -+ ehci0: usb@01c14000 { -+ status = "okay"; -+ }; -+ -+ ohci0: usb@01c14400 { -+ status = "okay"; -+ }; -+ -+ ahci: sata@01c18000 { -+ status = "okay"; -+ }; -+ -+ ehci1: usb@01c1c000 { -+ status = "okay"; -+ }; -+ -+ ohci1: usb@01c1c400 { -+ status = "okay"; -+ }; -+ -+ pinctrl@01c20800 { -+ mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { -+ allwinner,pins = "PH10"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = <0>; -+ allwinner,pull = <1>; -+ }; -+ -+ gmac_power_pin_bananapro: gmac_power_pin@0 { -+ allwinner,pins = "PH23"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ -+ led_pins_bananapro: led_pins@0 { -+ allwinner,pins = "PH24"; -+ allwinner,function = "gpio_out"; -+ allwinner,drive = <0>; -+ allwinner,pull = <0>; -+ }; -+ }; -+ -+ ir0: ir@01c21800 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ir0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart0: serial@01c28000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+ }; -+ -+ uart3: serial@01c28c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart3_pins_b>; -+ status = "okay"; -+ }; -+ -+ uart7: serial@01c29c00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart7_pins_a>; -+ status = "okay"; -+ }; -+ -+ i2c0: i2c@01c2ac00 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins_a>; -+ status = "okay"; -+ -+ axp209: pmic@34 { -+ compatible = "x-powers,axp209"; -+ reg = <0x34>; -+ interrupt-parent = <&nmi_intc>; -+ interrupts = <0 8>; -+ -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ }; -+ }; -+ -+ i2c2: i2c@01c2b400 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c2_pins_a>; -+ status = "okay"; -+ }; -+ -+ gmac: ethernet@01c50000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; -+ phy-mode = "rgmii"; -+ phy-supply = <®_gmac_3v3>; -+ status = "okay"; -+ -+ phy1: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&led_pins_bananapro>; -+ -+ green { -+ label = "bananapro:green:usr"; -+ gpios = <&pio 7 24 0>; -+ }; -+ }; -+ -+ reg_usb1_vbus: usb1-vbus { -+ status = "okay"; -+ }; -+ -+ reg_usb2_vbus: usb2-vbus { -+ status = "okay"; -+ }; -+ -+ reg_gmac_3v3: gmac-3v3 { -+ compatible = "regulator-fixed"; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gmac_power_pin_bananapro>; -+ regulator-name = "gmac-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ startup-delay-us = <50000>; -+ enable-active-high; -+ gpio = <&pio 7 23 0>; -+ }; -+}; diff --git a/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch b/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch new file mode 100644 index 0000000000..70283a5f7b --- /dev/null +++ b/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch @@ -0,0 +1,296 @@ +From 3613d535a77270eaf15a5f988a48434c7d1530f2 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 7 Jan 2015 20:44:52 +0100 +Subject: [PATCH] ARM: dts: sun7i: Add dts file for Bananapro board + +Add support for the new Bananapro A20 development board from lemaker.org. +This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for +OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver, +3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi. + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/sun7i-a20-bananapro.dts | 261 ++++++++++++++++++++++++++++++ + 2 files changed, 262 insertions(+) + create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapro.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 40d2901..b3dcf3f 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -466,6 +466,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31s-cs908.dtb + dtb-$(CONFIG_MACH_SUN7I) += \ + sun7i-a20-bananapi.dtb \ ++ sun7i-a20-bananapro.dtb \ + sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ +diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts +new file mode 100644 +index 0000000..3b4764d +--- /dev/null ++++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts +@@ -0,0 +1,261 @@ ++/* ++ * Copyright 2015 Hans de Goede ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public ++ * License along with this file; if not, write to the Free ++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++/include/ "sun7i-a20.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++ ++/ { ++ model = "LeMaker Banana Pro"; ++ compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ spi0: spi@01c05000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins_a>; ++ status = "okay"; ++ }; ++ ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 10 0>; /* PH10 */ ++ cd-inverted; ++ status = "okay"; ++ }; ++ ++ mmc3: mmc@01c12000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc3_pins_a>; ++ vmmc-supply = <®_vmmc3>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { ++ allwinner,pins = "PH0"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { ++ allwinner,pins = "PH1"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { ++ allwinner,pins = "PH10"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <0>; ++ allwinner,pull = <1>; ++ }; ++ ++ vmmc3_pin_bananapro: vmmc3_pin@0 { ++ allwinner,pins = "PH22"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ gmac_power_pin_bananapi: gmac_power_pin@0 { ++ allwinner,pins = "PH23"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_bananapi: led_pins@0 { ++ allwinner,pins = "PH24", "PG2"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ ir0: ir@01c21800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart2: serial@01c28800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart7: serial@01c29c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart7_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ }; ++ ++ i2c2: i2c@01c2b400 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_rgmii_a>; ++ phy = <&phy1>; ++ phy-mode = "rgmii"; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_bananapi>; ++ ++ green { ++ label = "bananapi:green:usr"; ++ gpios = <&pio 7 24 0>; ++ }; ++ blue { ++ label = "bananapi:blue:usr"; ++ gpios = <&pio 6 2 0>; ++ }; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ pinctrl-0 = <&usb1_vbus_pin_bananapro>; ++ gpio = <&pio 7 0 0>; /* PH0 */ ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ pinctrl-0 = <&usb2_vbus_pin_bananapro>; ++ gpio = <&pio 7 1 0>; /* PH1 */ ++ status = "okay"; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_bananapi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 7 23 0>; ++ }; ++ ++ reg_vmmc3: vmmc3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&vmmc3_pin_bananapro>; ++ regulator-name = "vmmc3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ enable-active-high; ++ gpio = <&pio 7 22 0>; ++ }; ++};