From: Andreas Böhler Date: Thu, 23 Jan 2020 20:20:38 +0000 (+0100) Subject: lantiq: add basic support for AVM FRITZ!Box 3390 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=73ec21cde2cde1fc27f66b08e8762cdc3c78b61a;p=openwrt%2Fstaging%2F981213.git lantiq: add basic support for AVM FRITZ!Box 3390 The FRITZ!Box 3390 actually contains two SoCs, one Lantiq with a 5GHz WiFi and one AR9342 with a 2.4GHz WiFi. Only the Lantiq has access to the flash memory, the Atheros runs fully from RAM. Specifications -------------- - Lantiq 500 MHz - 128MiB RAM - 128MiB NAND - 256k Flash - AR9580 5GHz WiFi - AR9342 560 MHz - 64MiB RAM - AR9328 2.4GHz WiFi Remarks ------- This commit only adds support for the Lantiq side of things and prepares the drivers for communication with the Atheros SoC. Thus, only 5GHz WiFi works by default, the 2.4GHz WiFi will be added via another target. Some kernel patches will be required to add support for the Atheros SoC. Installation ------------ Use the eva_ramboot.py script to boot the initramfs image. Then, transfer the sysupgrade image to the device and run sysupgrade to flash it to the NAND. Signed-off-by: Andreas Böhler Acked-by: Aleksander Jan Bajkowski A.Bajkowski@stud.elka.pw.edu.pl Signed-off-by: Joachim Cerny --- diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts new file mode 100644 index 0000000000..09c97a6454 --- /dev/null +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "vr9.dtsi" + +#include +#include + +/ { + compatible = "avm,fritz3390", "lantiq,xway", "lantiq,vr9"; + model = "AVM FRITZ!Box 3390"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + + led-dsl = &led_dsl; + led-internet = &led_info; + led-wifi = &led_wifi; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 45 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + led_power_red: power_red { + label = "red:power"; + gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; + + led_wifi: wifi { + label = "green:wifi"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + led_dsl: dsl { + label = "green:dsl"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + + led_lan { + label = "green:lan"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + + led_info: info { + label = "green:info"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + }; + + usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB1_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +ð0 { + interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + }; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&gphy0 { + lantiq,gphy-mode = ; +}; + +&gphy1 { + lantiq,gphy-mode = ; +}; + +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + phy-rst { + lantiq,pins = "io32", "io44"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; + + pcie-rst { + lantiq,pins = "io21"; + lantiq,open-drain; + lantiq,output = <1>; + }; + }; + + pcie-rst-dev { + gpio-hog; + line-name = "pcie-rst-dev"; + gpios = <22 GPIO_ACTIVE_LOW>; + output-low; + }; +}; + +&spi { + status = "okay"; + + flash@4 { + compatible = "jedec,spi-nor"; + reg = <4>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "urlader"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "tffs (1)"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "tffs (2)"; + read-only; + }; + }; + }; +}; + +&localbus { + flash@1 { + compatible = "lantiq,nand-xway"; + bank-width = <1>; + reg = <1 0x0 0x2000000>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand-ecc-mode = "on-die"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + vbus-supply = <&usb0_vbus>; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb1_vbus>; +}; + +&pcie0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_LOW>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <1>; + #address-cells = <2>; + device_type = "pci"; + + wifi@0,0 { + compatible = "pci168c,0033"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk index 1f045ee594..d8cabea972 100644 --- a/target/linux/lantiq/image/vr9.mk +++ b/target/linux/lantiq/image/vr9.mk @@ -120,6 +120,17 @@ define Device/avm_fritz3370-rev2-micron endef TARGET_DEVICES += avm_fritz3370-rev2-micron +define Device/avm_fritz3390 + $(Device/AVM) + $(Device/NAND) + DEVICE_MODEL := FRITZ!Box 3390 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 49152k + DEVICE_PACKAGES := kmod-ath9k kmod-owl-loader wpad-basic-wolfssl \ + kmod-usb-dwc2 fritz-tffs +endef +TARGET_DEVICES += avm_fritz3390 + define Device/avm_fritz7360sl $(Device/AVM) DEVICE_MODEL := FRITZ!Box 7360 SL diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds index a011b6c584..bac3ed2b53 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds @@ -38,7 +38,8 @@ arcadyan,vgv7519-brn) ucidef_set_led_wlan "wifi" "wifi" "green:wireless" "phy0radio" ;; avm,fritz3370-rev2-hynix|\ -avm,fritz3370-rev2-micron) +avm,fritz3370-rev2-micron|\ +avm,fritz3390) ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x17" ;; bt,homehub-v5a) diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network index 77d93d016b..476cc7eb8f 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network @@ -37,6 +37,7 @@ lantiq_setup_interfaces() ;; avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ + avm,fritz3390|\ avm,fritz7360sl|\ avm,fritz7360-v2|\ avm,fritz7362sl) @@ -86,6 +87,7 @@ lantiq_setup_dsl() arcadyan,vgv7510kw22-nor|\ avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ + avm,fritz3390|\ avm,fritz7360sl|\ avm,fritz7362sl|\ avm,fritz7412|\ @@ -135,6 +137,7 @@ lantiq_setup_macs() avm,fritz7360sl) wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1) ;; + avm,fritz3390|\ avm,fritz7362sl) lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) wan_mac=$(fritz_tffs -n macdsl -i $(find_mtd_part "tffs (1)")) diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom index ee8cc3879a..03664b3fd3 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom +++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom @@ -16,6 +16,9 @@ case "$FIRMWARE" in avm,fritz7362sl) caldata_extract_reverse "urlader" 0x1541 0x440 ;; + avm,fritz3390) + caldata_extract_reverse "urlader" 0x2546 0x440 + ;; avm,fritz7360sl|\ avm,fritz7360-v2) caldata_extract "urlader" 0x985 0x1000 diff --git a/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh index 0770052488..ab01d3bbf7 100755 --- a/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh +++ b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh @@ -11,6 +11,7 @@ platform_do_upgrade() { case "$board" in avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ + avm,fritz3390|\ avm,fritz7362sl|\ avm,fritz7412|\ avm,fritz7430|\