From: Wenli Looi <wlooi@ucalgary.ca>
Date: Mon, 23 Jan 2023 18:37:07 +0000 (+0000)
Subject: ath79: convert Netgear EX7300 caldata to nvmem
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7396263680b951211f33f2aa266b11bdd0047adc;p=openwrt%2Fstaging%2Fblocktrron.git

ath79: convert Netgear EX7300 caldata to nvmem

Transition to specify caldata in the DTS.

Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
---

diff --git a/target/linux/ath79/dts/qca9558_netgear_ex7300.dts b/target/linux/ath79/dts/qca9558_netgear_ex7300.dts
index fc0b6de96c..b94ccd30b7 100644
--- a/target/linux/ath79/dts/qca9558_netgear_ex7300.dts
+++ b/target/linux/ath79/dts/qca9558_netgear_ex7300.dts
@@ -121,6 +121,14 @@
 
 &pcie0 {
 	status = "okay";
+
+	wifi@0,0 {
+		compatible = "qcom,ath10k";
+		reg = <0 0 0 0 0>;
+
+		nvmem-cells = <&macaddr_caldata_c>, <&precal_caldata_5000>;
+		nvmem-cell-names = "mac-address", "pre-calibration";
+	};
 };
 
 &spi {
@@ -186,9 +194,8 @@
 &wmac {
 	status = "okay";
 
-	mtd-cal-data = <&caldata 0x1000>;
-	nvmem-cells = <&macaddr_caldata_6>;
-	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_caldata_6>, <&cal_caldata_1000>;
+	nvmem-cell-names = "mac-address", "calibration";
 };
 
 &mdio0 {
@@ -224,4 +231,16 @@
 	macaddr_caldata_6: macaddr@6 {
 		reg = <0x6 0x6>;
 	};
+
+	macaddr_caldata_c: macaddr@c {
+		reg = <0xc 0x6>;
+	};
+
+	cal_caldata_1000: cal@1000 {
+		reg = <0x1000 0x440>;
+	};
+
+	precal_caldata_5000: precal@5000 {
+		reg = <0x5000 0x2f20>;
+	};
 };
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index b4a2209fdf..b0b91f1c8a 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -216,10 +216,6 @@ case "$FIRMWARE" in
 		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
 			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
 		;;
-	netgear,ex7300)
-		caldata_extract "caldata" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary caldata 0xc)
-		;;
 	phicomm,k2t)
 		caldata_extract "art" 0x5000 0x2f20
 		ath10k_patch_mac $(k2t_get_mac "5g_mac")