From: INAGAKI Hiroshi Date: Sun, 27 Aug 2023 14:23:20 +0000 (+0900) Subject: mediatek: add support for Buffalo WSR-3200AX4S X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7383eb266b64f374c7109ad1db5360bf91dc11c3;p=openwrt%2Fstaging%2Fthess.git mediatek: add support for Buffalo WSR-3200AX4S Buffalo WSR-3200AX4S is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7622B. Specification: - SoC : MediaTek MT7622B - RAM : DDR3 512 MiB - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7915 - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/5x (2x: buttons, 3x: slide-switches) - UART : through-hole on PCB (J4) - assignment: 3.3V, GND, TX, RX from tri-angle marking - settings : 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory.bin image: 1. Boot WSR-3200AX4S with "Router" mode 2. Access to "http://192.168.11.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("更新実行") button 4. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on flash. The first one will always be used for booting and the secondary is for backup. - This support generates multiple factory*.bin image: - factory.bin : for flashing from OEM WebUI - factory-uboot.bin: for flashing from U-Boot or clean installation via sysupgrade (don't use for normal sysupgrade) Known issues: - Wi-Fi MAC addresses won't be applied to each adapter. MAC Addresses: LAN : C4:3C:EA:xx:xx:60 (board_data, mac (text)) WAN : C4:3C:EA:xx:xx:60 (board_data, mac (text)) 2.4 GHz: C4:3C:EA:xx:xx:61 5 GHz : C4:3C:EA:xx:xx:68 Signed-off-by: INAGAKI Hiroshi --- diff --git a/target/linux/mediatek/dts/mt7622-buffalo-wsr-3200ax4s.dts b/target/linux/mediatek/dts/mt7622-buffalo-wsr-3200ax4s.dts new file mode 100644 index 0000000000..678c31b711 --- /dev/null +++ b/target/linux/mediatek/dts/mt7622-buffalo-wsr-3200ax4s.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7622-buffalo-wsr.dtsi" + +/ { + model = "Buffalo WSR-3200AX4S"; + compatible = "buffalo,wsr-3200ax4s", "mediatek,mt7622"; + + memory { + reg = <0 0x40000000 0 0x1f000000>; + }; +}; + +&pio { + /* Serial NAND is shared pin with SPI-NOR */ + serial_nand_pins: serial-nand-pins { + mux { + function = "flash"; + groups = "snfi"; + }; + + conf-cmd-dat { + pins = "SPI_WP", "SPI_HOLD", "SPI_MOSI", + "SPI_MISO", "SPI_CS"; + input-enable; + drive-strength = <16>; + bias-pull-up; + }; + + conf-clk { + pins = "SPI_CLK"; + drive-strength = <16>; + bias-pull-down; + }; + }; +}; + +&mdio { + switch@1f { + compatible = "mediatek,mt7531"; + reg = <0x1f>; + reset-gpios = <&pio 54 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-connection-type = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; + }; +}; + +&snfi { + pinctrl-names = "default"; + pinctrl-0 = <&serial_nand_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <104000000>; + nand-ecc-engine = <&snfi>; + mediatek,bmt-v2; + mediatek,bmt-table-size = <0x1000>; + /* + * - Preloader - (kernel (6MiB, in firmware)) + * - Kernel2 - WTB + */ + mediatek,bmt-remap-range = <0x0 0x8c0000>, + <0x1ac0000 0x5200000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Preloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "ATF"; + reg = <0x80000 0x40000>; + read-only; + }; + + partition@c0000 { + label = "u-boot"; + reg = <0xc0000 0x80000>; + read-only; + }; + + partition@140000 { + label = "u-boot-env"; + reg = <0x140000 0x80000>; + read-only; + }; + + factory: partition@1c0000 { + label = "factory"; + reg = <0x1c0000 0x100000>; + read-only; + }; + + partition@2c0000 { + compatible = "brcm,trx"; + brcm,trx-magic = <0x33504844>; + label = "firmware"; + reg = <0x2c0000 0x1800000>; + }; + + partition@1ac0000 { + label = "Kernel2"; + reg = <0x1ac0000 0x1800000>; + }; + + partition@32c0000 { + label = "glbcfg"; + reg = <0x32c0000 0x200000>; + read-only; + }; + + partition@34c0000 { + label = "board_data"; + reg = <0x34c0000 0x200000>; + read-only; + }; + + partition@36c0000 { + label = "WTB"; + reg = <0x36c0000 0x3600000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/mediatek/image/mt7622.mk b/target/linux/mediatek/image/mt7622.mk index 6f64740628..65db1ebe2e 100644 --- a/target/linux/mediatek/image/mt7622.mk +++ b/target/linux/mediatek/image/mt7622.mk @@ -1,5 +1,7 @@ DTS_DIR := $(DTS_DIR)/mediatek +DEVICE_VARS += BUFFALO_TRX_MAGIC + define Image/Prepare # For UBI we want only one extra block rm -f $(KDIR)/ubi_mark @@ -95,33 +97,38 @@ define Device/bananapi_bpi-r64 endef TARGET_DEVICES += bananapi_bpi-r64 -define Device/buffalo_wsr-2533dhp2 +define Device/buffalo_wsr DEVICE_VENDOR := Buffalo - DEVICE_MODEL := WSR-2533DHP2 - DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2 DEVICE_DTS_DIR := ../dts - IMAGE_SIZE := 59392k KERNEL_SIZE := 6144k BLOCKSIZE := 128k PAGESIZE := 2048 - SUBPAGESIZE := 512 UBINIZE_OPTS := -E 5 BUFFALO_TAG_PLATFORM := MTK BUFFALO_TAG_VERSION := 9.99 BUFFALO_TAG_MINOR := 9.99 IMAGES += factory.bin factory-uboot.bin - KERNEL_INITRAMFS := kernel-bin | lzma | \ + KERNEL_INITRAMFS = kernel-bin | lzma | \ fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \ buffalo-trx - IMAGE/factory.bin := append-ubi | \ - buffalo-trx 0x32504844 $$$$@ $(KDIR)/ubi_mark | \ - buffalo-enc WSR-2533DHP2 $$(BUFFALO_TAG_VERSION) -l | \ - buffalo-tag-dhp WSR-2533DHP2 JP JP | buffalo-enc-tag -l | buffalo-dhp-image + IMAGE/factory.bin = append-ubi | \ + buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark | \ + buffalo-enc $$(DEVICE_MODEL) $$(BUFFALO_TAG_VERSION) -l | \ + buffalo-tag-dhp $$(DEVICE_MODEL) JP JP | buffalo-enc-tag -l | buffalo-dhp-image IMAGE/factory-uboot.bin := append-ubi | \ - buffalo-trx 0x32504844 $$$$@ $(KDIR)/ubi_mark + buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $$$$@ $(KDIR)/ubi_mark IMAGE/sysupgrade.bin := \ - buffalo-trx 0x32504844 $(KDIR)/tmp/$$(DEVICE_NAME).null | \ + buffalo-trx $$$$(BUFFALO_TRX_MAGIC) $(KDIR)/tmp/$$(DEVICE_NAME).null | \ sysupgrade-tar kernel=$$$$@ | append-metadata +endef + +define Device/buffalo_wsr-2533dhp2 + $(Device/buffalo_wsr) + DEVICE_MODEL := WSR-2533DHP2 + DEVICE_DTS := mt7622-buffalo-wsr-2533dhp2 + IMAGE_SIZE := 59392k + SUBPAGESIZE := 512 + BUFFALO_TRX_MAGIC := 0x32504844 DEVICE_PACKAGES := kmod-mt7615-firmware swconfig DEVICE_COMPAT_VERSION := 1.1 DEVICE_COMPAT_MESSAGE := Partition table has been changed due to kernel size restrictions. \ @@ -130,6 +137,16 @@ define Device/buffalo_wsr-2533dhp2 endef TARGET_DEVICES += buffalo_wsr-2533dhp2 +define Device/buffalo_wsr-3200ax4s + $(Device/buffalo_wsr) + DEVICE_MODEL := WSR-3200AX4S + DEVICE_DTS := mt7622-buffalo-wsr-3200ax4s + IMAGE_SIZE := 24576k + BUFFALO_TRX_MAGIC := 0x33504844 + DEVICE_PACKAGES := kmod-mt7915-firmware +endef +TARGET_DEVICES += buffalo_wsr-3200ax4s + define Device/elecom_wrc-2533gent DEVICE_VENDOR := Elecom DEVICE_MODEL := WRC-2533GENT diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network index 38db921f5c..d1341099bc 100644 --- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network @@ -9,6 +9,7 @@ mediatek_setup_interfaces() case $board in bananapi,bpi-r64|\ + buffalo,wsr-3200ax4s|\ elecom,wrc-x3200gst3|\ linksys,e8450|\ linksys,e8450-ubi|\ @@ -55,6 +56,11 @@ mediatek_setup_macs() local label_mac="" case $board in + buffalo,wsr-3200ax4s) + lan_mac=$(mtd_get_mac_ascii board_data "mac") + wan_mac=$lan_mac + label_mac=$lan_mac + ;; reyee,ax3200-e5|\ ruijie,rg-ew3200gx-pro) lan_mac=$(macaddr_add $(get_mac_label) 1) diff --git a/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index f8639e9f40..7ee9f24071 100644 --- a/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/mt7622/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -13,6 +13,11 @@ case "$board" in bananapi,bpi-r64) [ "$PHYNBR" = "0" ] && macaddr_add $(cat /sys/class/net/eth0/address) 2 > /sys${DEVPATH}/macaddress ;; + buffalo,wsr-3200ax4s) + basemac=$(mtd_get_mac_ascii board_data "mac") + [ "$PHYNBR" = "0" ] && macaddr_add $basemac 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $basemac 8 > /sys${DEVPATH}/macaddress + ;; reyee,ax3200-e5|\ ruijie,rg-ew3200gx-pro) [ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/mt7622/base-files/etc/uci-defaults/09_fix_crc b/target/linux/mediatek/mt7622/base-files/etc/uci-defaults/09_fix_crc index 81cb6b18b7..59b00a6e69 100644 --- a/target/linux/mediatek/mt7622/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/mediatek/mt7622/base-files/etc/uci-defaults/09_fix_crc @@ -7,4 +7,8 @@ buffalo,wsr-2533dhp2) mtd -M 0x44485032 ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0 exit 1 ;; +buffalo,wsr-3200ax4s) + mtd -M 0x44485033 ${kernel_size:+-c 0x$kernel_size} fixtrx firmware && exit 0 + exit 1 + ;; esac diff --git a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh index b37b7b1c6e..ea3176d2d1 100755 --- a/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/mt7622/base-files/lib/upgrade/platform.sh @@ -21,7 +21,8 @@ platform_do_upgrade() { ;; esac ;; - buffalo,wsr-2533dhp2) + buffalo,wsr-2533dhp2|\ + buffalo,wsr-3200ax4s) local magic="$(get_magic_long "$1")" # use "mtd write" if the magic is "DHP2 (0x44485032)" @@ -67,7 +68,8 @@ platform_check_image() { [ "$#" -gt 1 ] && return 1 case "$board" in - buffalo,wsr-2533dhp2) + buffalo,wsr-2533dhp2|\ + buffalo,wsr-3200ax4s) buffalo_check_image "$board" "$magic" "$1" || return 1 ;; elecom,wrc-x3200gst3|\