From: Chukun Pan Date: Tue, 18 Jun 2024 15:02:12 +0000 (+0800) Subject: mediatek: add support for TP-Link TL-XTR8488 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=73832e1a489b30133113b511fd1643b69d66a18b;p=openwrt%2Fstaging%2Fthess.git mediatek: add support for TP-Link TL-XTR8488 Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: ESMT F50L1G41LB 128MB RAM: MT40A512M16TB-062ER 1GB Ethernet: 2x 2.5G, 4x 1G Lan WiFi1: MT7976GN 2.4GHz 4T4R WiFi2: MT7976AN 5.2GHz 4T4R WiFi3: MT7915AN 5.8GHz 4T4R Button: Reset, WPS, Turbo USB: 1 x USB 3.0 Power: DC 12V 5A Flash instructions: 1. Execute the following operation to open nc shell: https://openwrt.org/inbox/toh/tp-link/xdr-6086#rooting 2. Replace the stock bootloader to OpenWrt's: dd bs=131072 conv=sync of=/dev/mtdblock9 if=/tmp/xxx-preloader.bin dd bs=131072 conv=sync of=/dev/mtdblock9 seek=28 if=/tmp/xxx-bl31-uboot.fip 3. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. 4. Download the initramfs image, and restart the router, waiting for tftp recovery to complete. 5. After openwrt boots up, perform sysupgrade. Signed-off-by: Chukun Pan Link: https://github.com/openwrt/openwrt/pull/15930 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/mediatek/dts/mt7986a-tplink-tl-xtr8488.dts b/target/linux/mediatek/dts/mt7986a-tplink-tl-xtr8488.dts new file mode 100644 index 0000000000..1b26b25f49 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986a-tplink-tl-xtr8488.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; +#include +#include +#include + +#include "mt7986a.dtsi" + +/ { + model = "TP-Link TL-XTR8488"; + compatible = "tplink,tl-xtr8488", "mediatek,mt7986a"; + + aliases { + serial0 = &uart0; + label-mac-device = &gmac0; + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + chosen { + bootargs = "root=/dev/fit0 rootwait"; + rootdisk = <&ubi_rootdisk>; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0 0x40000000 0 0x40000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "fixed-5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 15 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "wps"; + linux,code = ; + gpios = <&pio 16 GPIO_ACTIVE_LOW>; + }; + + turbo { + label = "turbo"; + linux,code = ; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status-red { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + }; + + led_status_green: status-green { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 8 GPIO_ACTIVE_HIGH>; + }; + + turbo { + label = "green:turbo"; + color = ; + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_config_1c 0>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy7>; + phy-mode = "2500base-x"; + + nvmem-cells = <&macaddr_config_1c 1>; + nvmem-cell-names = "mac-address"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + phy5: phy@5 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <5>; + realtek,aldps-enable; + }; + + phy7: phy@7 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <7>; + realtek,aldps-enable; + }; + + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 6 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@5 { + reg = <5>; + label = "lan5"; + phy-handle = <&phy5>; + phy-mode = "2500base-x"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x000000 0x0100000>; + read-only; + }; + + partition@100000 { + label = "config"; + reg = <0x100000 0x0040000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_config_1c: macaddr@1c { + compatible = "mac-base"; + reg = <0x1c 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@140000 { + label = "factory"; + reg = <0x140000 0x0040000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + eeprom_factory_1000: eeprom@1000 { + reg = <0x1000 0xe00>; + }; + }; + }; + + partition@180000 { + label = "reserved"; + reg = <0x180000 0x0200000>; + read-only; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x0200000>; + read-only; + }; + + partition@580000 { + compatible = "linux,ubi"; + reg = <0x580000 0x7800000>; + label = "ubi"; + + volumes { + ubi_rootdisk: ubi-volume-fit { + volname = "fit"; + }; + }; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; + + pcie@0,0 { + reg = <0x0000 0 0 0 0>; + + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5470000 5875000>; + + nvmem-cells = <&eeprom_factory_1000>, <&macaddr_config_1c 3>; + nvmem-cell-names = "eeprom", "mac-address"; + }; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pio { + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_clk", "pcie_wake", "pcie_pereset"; + }; + }; + + spi_flash_pins: spi-flash-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&ssusb { + vusb33-supply = <®_3p3v>; + vbus-supply = <®_5v>; + status = "okay"; +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + pinctrl-names = "default"; + pinctrl-0 = <&wf_2g_5g_pins>; + ieee80211-freq-limit = <2400000 2500000>, <5170000 5350000>; + nvmem-cells = <&eeprom_factory_0>, <&macaddr_config_1c 2>; + nvmem-cell-names = "eeprom", "mac-address"; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 8246a3b004..cf48926ad1 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -71,7 +71,8 @@ mediatek_setup_interfaces() ;; glinet,gl-mt6000|\ tplink,tl-xdr4288|\ - tplink,tl-xdr6088) + tplink,tl-xdr6088|\ + tplink,tl-xtr8488) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" eth1 ;; mediatek,mt7986a-rfb) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index a16f5e7eb4..1605c0086d 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -159,6 +159,9 @@ case "$board" in tplink,tl-xdr6088) [ "$PHYNBR" = "0" ] && get_mac_label > /sys${DEVPATH}/macaddress ;; + tplink,tl-xtr8488) + [ "$PHYNBR" = "1" ] && get_mac_label > /sys${DEVPATH}/macaddress + ;; ubnt,unifi-6-plus) addr=$(mtd_get_mac_binary EEPROM 0x6) [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 4005154db2..2398040e33 100755 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -77,6 +77,7 @@ platform_do_upgrade() { tplink,tl-xdr4288|\ tplink,tl-xdr6086|\ tplink,tl-xdr6088|\ + tplink,tl-xtr8488|\ xiaomi,redmi-router-ax6000-ubootmod) fit_do_upgrade "$1" ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index a4291e30a7..453bdf1046 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1167,6 +1167,16 @@ define Device/tplink_tl-xdr6088 endef TARGET_DEVICES += tplink_tl-xdr6088 +define Device/tplink_tl-xtr8488 + DEVICE_MODEL := TL-XTR8488 + DEVICE_DTS := mt7986a-tplink-tl-xtr8488 + $(call Device/tplink_tl-xdr-common) + DEVICE_PACKAGES += kmod-mt7915-firmware + ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4 + ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xtr8488 +endef +TARGET_DEVICES += tplink_tl-xtr8488 + define Device/ubnt_unifi-6-plus DEVICE_VENDOR := Ubiquiti DEVICE_MODEL := UniFi U6+