From: Luis Araneda Date: Fri, 5 Jan 2018 13:11:16 +0000 (-0300) Subject: ipq806x: Sort occurrences of boardame alphabetically X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7293499f719d73ffaeb61011d077e84d309b0f25;p=openwrt%2Fstaging%2Fjogo.git ipq806x: Sort occurrences of boardame alphabetically This restores the alphabetical sort that was present before the renaming of boardname. Signed-off-by: Luis Araneda --- diff --git a/package/boot/uboot-envtools/files/ipq b/package/boot/uboot-envtools/files/ipq index c3ec01efd0..4618aac892 100644 --- a/package/boot/uboot-envtools/files/ipq +++ b/package/boot/uboot-envtools/files/ipq @@ -31,13 +31,13 @@ ubootenv_mtdinfo () { } case "$board" in +linksys,ea8500) + ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000" + ;; qcom,ipq8064-ap148 |\ qcom,ipq8064-db149) ubootenv_add_uci_config $(ubootenv_mtdinfo) ;; -linksys,ea8500) - ubootenv_add_uci_config "/dev/mtd10" "0x0" "0x20000" "0x20000" - ;; zyxel,nbg6817) ubootenv_add_uci_config "/dev/mtdblock9" "0x0" "0x10000" "0x10000" ;; diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index f0b087f6f6..b04832ff79 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -11,11 +11,10 @@ board=$(board_name) boardname="${board##*,}" case "$board" in -tplink,c2600) - ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1" - ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1" - ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20" - ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e" +avm,fritzbox-4040) + ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt" + ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1" + ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e" ;; netgear,d7800 |\ netgear,r7500 |\ @@ -26,15 +25,11 @@ netgear,r7800) ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0" ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata" ;; -avm,fritzbox-4040) - ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt" - ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e" - ;; -zyxel,nbg6817) - ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt" - ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1" +tplink,c2600) + ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1" + ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1" + ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20" + ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e" ;; tplink,vr2600v) ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" @@ -43,6 +38,11 @@ tplink,vr2600v) ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt" ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20" ;; +zyxel,nbg6817) + ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt" + ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1" + ;; *) ;; esac diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index 8854b9c67d..74a38eece6 100755 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -12,6 +12,18 @@ board_config_update board=$(board_name) case "$board" in +avm,fritzbox-4040) + ucidef_set_interfaces_lan_wan "eth0" "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" + ;; +linksys,ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" + ucidef_set_interface_macaddr "lan" "$hw_mac_addr" + ucidef_set_interface_macaddr "wan" "$hw_mac_addr" + ;; netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ @@ -21,27 +33,14 @@ tplink,vr2600v) ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0" ;; -tplink,c2600) - ucidef_add_switch "switch0" \ - "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" - ;; qcom,ipq8064-db149) ucidef_set_interface_lan "eth1 eth2 eth3" ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0" ;; -linksys,ea8500) - - hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" - ucidef_set_interface_macaddr "lan" "$hw_mac_addr" - ucidef_set_interface_macaddr "wan" "$hw_mac_addr" - ;; -avm,fritzbox-4040) - ucidef_set_interfaces_lan_wan "eth0" "eth1" +tplink,c2600) ucidef_add_switch "switch0" \ - "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" + "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0" ;; zyxel,nbg6817) hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr) diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index dc74df87cc..4aaa92305b 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -47,69 +47,69 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/pre-cal-ahb-a000000.wifi.bin") case "$board" in - qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 4096 12064 - ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; + qcom,ap-dk01.1-c1) + ath10kcal_extract "ART" 4096 12064 + ;; esac ;; "ath10k/pre-cal-ahb-a800000.wifi.bin") case "$board" in - qcom,ap-dk01.1-c1) - ath10kcal_extract "ART" 20480 12064 - ;; avm,fritzbox-4040) /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config") ;; + qcom,ap-dk01.1-c1) + ath10kcal_extract "ART" 20480 12064 + ;; esac ;; "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in - tplink,c2600) - ath10kcal_extract "radio" 4096 12064 -# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) + linksys,ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ath10kcal_extract "art" 4096 12064 ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) ath10kcal_extract "art" 4096 12064 ;; - linksys,ea8500) - hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ath10kcal_extract "art" 4096 12064 - ;; - zyxel,nbg6817) - ath10kcal_extract "0:ART" 4096 12064 + tplink,c2600) + ath10kcal_extract "radio" 4096 12064 +# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1) ;; tplink,vr2600v) ath10kcal_extract "ART" 4096 12064 ;; + zyxel,nbg6817) + ath10kcal_extract "0:ART" 4096 12064 + ;; esac ;; "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in - tplink,c2600) - ath10kcal_extract "radio" 20480 12064 -# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2) + linksys,ea8500) + hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) + ath10kcal_extract "art" 20480 12064 ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) ath10kcal_extract "art" 20480 12064 ;; - linksys,ea8500) - hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ath10kcal_extract "art" 20480 12064 - ;; - zyxel,nbg6817) - ath10kcal_extract "0:ART" 20480 12064 + tplink,c2600) + ath10kcal_extract "radio" 20480 12064 +# ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2) ;; tplink,vr2600v) ath10kcal_extract "ART" 20480 12064 ;; + zyxel,nbg6817) + ath10kcal_extract "0:ART" 20480 12064 + ;; esac ;; *) diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 207711063c..7e31c38561 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -12,23 +12,23 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in - tplink,c2600) - echo $(macaddr_add $(mtd_get_mac_binary default-mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress + linksys,ea8500) + echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) echo $(macaddr_add $(mtd_get_mac_binary art 6) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress ;; - linksys,ea8500) - echo $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress - ;; - zyxel,nbg6817) - echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress + tplink,c2600) + echo $(macaddr_add $(mtd_get_mac_binary default-mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress ;; tplink,vr2600v) echo $(macaddr_add $(mtd_get_mac_binary default-mac 0) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress ;; + zyxel,nbg6817) + echo $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) $((1 - $PHYNBR)) ) > /sys${DEVPATH}/macaddress + ;; *) ;; esac diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh index dc88c9ed09..f71ee37d99 100644 --- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh @@ -10,6 +10,9 @@ platform_check_image() { platform_do_upgrade() { case "$(board_name)" in + linksys,ea8500) + platform_do_upgrade_linksys "$ARGV" + ;; netgear,d7800 |\ netgear,r7500 |\ netgear,r7500v2 |\ @@ -24,9 +27,6 @@ platform_do_upgrade() { MTD_CONFIG_ARGS="-s 0x200000" default_do_upgrade "$ARGV" ;; - linksys,ea8500) - platform_do_upgrade_linksys "$ARGV" - ;; tplink,vr2600v) PART_NAME="kernel:rootfs" MTD_CONFIG_ARGS="-s 0x200000" diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index f28f4a3b7a..e8182e858f 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -98,70 +98,20 @@ define Device/ZyXELImage IMAGE/mmcblk0p4-kernel.bin := append-kernel endef -define Device/qcom_ipq8064-ap148 - $(call Device/FitImage) - $(call Device/UbiFit) - DEVICE_DTS := qcom-ipq8064-ap148 - KERNEL_INSTALL := 1 - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := ap148 - SUPPORTED_DEVICES += ap148 - DEVICE_TITLE := Qualcomm AP148 - DEVICE_PACKAGES := ath10k-firmware-qca99x0 -endef -TARGET_DEVICES += qcom_ipq8064-ap148 - -define Device/qcom_ipq8064-ap148-legacy - $(call Device/LegacyImage) - $(call Device/UbiFit) - DEVICE_DTS := qcom-ipq8064-ap148 - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := ap148 - SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148 - DEVICE_TITLE := Qualcomm AP148 (legacy) - DEVICE_PACKAGES := ath10k-firmware-qca99x0 -endef -TARGET_DEVICES += qcom_ipq8064-ap148-legacy - -define Device/tplink_c2600 - $(call Device/TpSafeImage) - DEVICE_DTS := qcom-ipq8064-c2600 - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := c2600 - SUPPORTED_DEVICES += c2600 - TPLINK_BOARD_ID := C2600 - DEVICE_TITLE := TP-Link Archer C2600 - DEVICE_PACKAGES := ath10k-firmware-qca99x0 -endef -TARGET_DEVICES += tplink_c2600 - -define Device/netgear_d7800 - $(call Device/DniImage) - DEVICE_DTS := qcom-ipq8064-d7800 - KERNEL_SIZE := 2097152 - NETGEAR_BOARD_ID := D7800 - NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := d7800 - SUPPORTED_DEVICES += d7800 - DEVICE_TITLE := Netgear Nighthawk X4 D7800 - DEVICE_PACKAGES := ath10k-firmware-qca99x0 -endef -TARGET_DEVICES += netgear_d7800 - -define Device/qcom_ipq8064-db149 - $(call Device/FitImage) - DEVICE_DTS := qcom-ipq8064-db149 - KERNEL_INSTALL := 1 - BOARD_NAME := db149 - DEVICE_TITLE := Qualcomm DB149 - DEVICE_PACKAGES := ath10k-firmware-qca99x0 +define Device/avm_fritzbox-4040 + $(call Device/FitImageLzma) + DEVICE_DTS := qcom-ipq4019-fritz4040 + KERNEL_LOADADDR := 0x80208000 + BLOCKSIZE := 4k + PAGESIZE := 256 + BOARD_NAME := fritz4040 + DEVICE_TITLE := AVM Fritz!Box 4040 + IMAGE_SIZE := 29753344 + IMAGES = sysupgrade.bin + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata + DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040 endef -TARGET_DEVICES += qcom_ipq8064-db149 +TARGET_DEVICES += avm_fritzbox-4040 define Device/linksys_ea8500 $(call Device/LegacyImage) @@ -182,20 +132,20 @@ define Device/linksys_ea8500 endef TARGET_DEVICES += linksys_ea8500 -define Device/avm_fritzbox-4040 - $(call Device/FitImageLzma) - DEVICE_DTS := qcom-ipq4019-fritz4040 - KERNEL_LOADADDR := 0x80208000 - BLOCKSIZE := 4k - PAGESIZE := 256 - BOARD_NAME := fritz4040 - DEVICE_TITLE := AVM Fritz!Box 4040 - IMAGE_SIZE := 29753344 - IMAGES = sysupgrade.bin - IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - DEVICE_PACKAGES := kmod-usb-phy-qcom-ipq4019 ipq-wifi-fritz4040 fritz-tffs fritz-caldata u-boot-fritz4040 +define Device/netgear_d7800 + $(call Device/DniImage) + DEVICE_DTS := qcom-ipq8064-d7800 + KERNEL_SIZE := 2097152 + NETGEAR_BOARD_ID := D7800 + NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4 + BLOCKSIZE := 128k + PAGESIZE := 2048 + BOARD_NAME := d7800 + SUPPORTED_DEVICES += d7800 + DEVICE_TITLE := Netgear Nighthawk X4 D7800 + DEVICE_PACKAGES := ath10k-firmware-qca99x0 endef -TARGET_DEVICES += avm_fritzbox-4040 +TARGET_DEVICES += netgear_d7800 define Device/netgear_r7500 $(call Device/DniImage) @@ -242,37 +192,6 @@ define Device/netgear_r7800 endef TARGET_DEVICES += netgear_r7800 -define Device/zyxel_nbg6817 - DEVICE_DTS := qcom-ipq8065-nbg6817 - KERNEL_SIZE := 4096k - BLOCKSIZE := 64k - BOARD_NAME := nbg6817 - SUPPORTED_DEVICES += nbg6817 - DEVICE_TITLE := ZyXEL NBG6817 - DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup - $(call Device/ZyXELImage) -endef -TARGET_DEVICES += zyxel_nbg6817 - -define Device/tplink_vr2600v - PROFILES += $$(DEVICE_NAME) - FILESYSTEMS := squashfs - KERNEL_SUFFIX := -uImage - KERNEL = kernel-bin | append-dtb | uImage none - KERNEL_NAME := zImage - KERNEL_SIZE := 2097152 - DEVICE_DTS := qcom-ipq8064-vr2600v - BLOCKSIZE := 128k - PAGESIZE := 2048 - BOARD_NAME := vr2600v - SUPPORTED_DEVICES += vr2600v - DEVICE_TITLE := TP-Link Archer VR2600v - DEVICE_PACKAGES := ath10k-firmware-qca99x0 - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata -endef -TARGET_DEVICES += tplink_vr2600v - define Device/qcom_ap-dk01.1-c1 PROFILES += $$(DEVICE_NAME) DEVICE_TITLE := QCA AP-DK01.1-C1 @@ -304,4 +223,85 @@ define Device/qcom_ap-dk04.1-c1 endef TARGET_DEVICES += qcom_ap-dk04.1-c1 +define Device/qcom_ipq8064-ap148 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_DTS := qcom-ipq8064-ap148 + KERNEL_INSTALL := 1 + BLOCKSIZE := 128k + PAGESIZE := 2048 + BOARD_NAME := ap148 + SUPPORTED_DEVICES += ap148 + DEVICE_TITLE := Qualcomm AP148 + DEVICE_PACKAGES := ath10k-firmware-qca99x0 +endef +TARGET_DEVICES += qcom_ipq8064-ap148 + +define Device/qcom_ipq8064-ap148-legacy + $(call Device/LegacyImage) + $(call Device/UbiFit) + DEVICE_DTS := qcom-ipq8064-ap148 + BLOCKSIZE := 128k + PAGESIZE := 2048 + BOARD_NAME := ap148 + SUPPORTED_DEVICES := qcom,ipq8064-ap148 ap148 + DEVICE_TITLE := Qualcomm AP148 (legacy) + DEVICE_PACKAGES := ath10k-firmware-qca99x0 +endef +TARGET_DEVICES += qcom_ipq8064-ap148-legacy + +define Device/qcom_ipq8064-db149 + $(call Device/FitImage) + DEVICE_DTS := qcom-ipq8064-db149 + KERNEL_INSTALL := 1 + BOARD_NAME := db149 + DEVICE_TITLE := Qualcomm DB149 + DEVICE_PACKAGES := ath10k-firmware-qca99x0 +endef +TARGET_DEVICES += qcom_ipq8064-db149 + +define Device/tplink_c2600 + $(call Device/TpSafeImage) + DEVICE_DTS := qcom-ipq8064-c2600 + BLOCKSIZE := 128k + PAGESIZE := 2048 + BOARD_NAME := c2600 + SUPPORTED_DEVICES += c2600 + TPLINK_BOARD_ID := C2600 + DEVICE_TITLE := TP-Link Archer C2600 + DEVICE_PACKAGES := ath10k-firmware-qca99x0 +endef +TARGET_DEVICES += tplink_c2600 + +define Device/tplink_vr2600v + PROFILES += $$(DEVICE_NAME) + FILESYSTEMS := squashfs + KERNEL_SUFFIX := -uImage + KERNEL = kernel-bin | append-dtb | uImage none + KERNEL_NAME := zImage + KERNEL_SIZE := 2097152 + DEVICE_DTS := qcom-ipq8064-vr2600v + BLOCKSIZE := 128k + PAGESIZE := 2048 + BOARD_NAME := vr2600v + SUPPORTED_DEVICES += vr2600v + DEVICE_TITLE := TP-Link Archer VR2600v + DEVICE_PACKAGES := ath10k-firmware-qca99x0 + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata +endef +TARGET_DEVICES += tplink_vr2600v + +define Device/zyxel_nbg6817 + DEVICE_DTS := qcom-ipq8065-nbg6817 + KERNEL_SIZE := 4096k + BLOCKSIZE := 64k + BOARD_NAME := nbg6817 + SUPPORTED_DEVICES += nbg6817 + DEVICE_TITLE := ZyXEL NBG6817 + DEVICE_PACKAGES := ath10k-firmware-qca9984 e2fsprogs kmod-fs-ext4 losetup + $(call Device/ZyXELImage) +endef +TARGET_DEVICES += zyxel_nbg6817 + $(eval $(call BuildImage))