From: Gabor Juhos Date: Tue, 27 Dec 2011 16:56:30 +0000 (+0000) Subject: ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=723d8dd74fdcb14465acc5ef5956020054ff9642;p=openwrt%2Fstaging%2Fthess.git ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board SVN-Revision: 29612 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index edb8376cdd..652787b3d4 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -66,6 +66,9 @@ get_status_led() { whr-g300n) status_led="whr-g300n:green:router" ;; + wli-tx4-ag300n) + status_led="buffalo:blue:power" + ;; wl-351) status_led="wl-351:amber:power" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index a1d4887ecb..55c577e27f 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -60,6 +60,7 @@ case "$FIRMWARE" in wcr-150gn | \ whr-g300n | \ wl-351 | \ + wli-tx4-ag300n | \ wr512-3gn) rt2x00_eeprom_extract "factory" 0 272 ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index 60dd716080..834a2a7d90 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -30,6 +30,10 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t" ;; + wli-tx4-ag300n) + ucidef_set_interface_lan "eth0" + ;; + rt-n15) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "rtl8366s" "1" "1" @@ -81,6 +85,11 @@ ramips_setup_macs() lan_mac=$(ramips_get_mac_binary factory 4) wan_mac=$(ramips_get_mac_binary factory 40) ;; + + wli-tx4-ag300n) + lan_mac=$(ramips_get_mac_binary factory 4) + ;; + esac [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 4dc10aeb22..d197fcedca 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -107,6 +107,9 @@ ramips_board_name() { *"Sitecom WL-351 v1 002") name="wl-351" ;; + *"WLI-TX4-AG300N") + name="wli-tx4-ag300n" + ;; *"WZR-AGL300NH") name="wzr-agl300nh" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 03a1e7b100..aebaf3879e 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -27,6 +27,7 @@ platform_check_image() { rt-g32-b1 | \ rt-n15 | \ v22rw-2x2 | \ + wli-tx4-ag300n | \ whr-g300n) [ "$magic" != "2705" ] && { echo "Invalid image type." diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h index 712976082b..9e48b5caae 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h @@ -15,6 +15,7 @@ enum ramips_mach_type { RAMIPS_MACH_GENERIC, /* RT2880 based machines */ RAMIPS_MACH_RT_N15, /* Asus RT-N15 */ + RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */ RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */ /* RT3050 based machines */ diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig index 0fc7788302..c30b3ad1d9 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig @@ -7,6 +7,11 @@ config RT288X_MACH_RT_N15 select RALINK_DEV_GPIO_BUTTONS select RALINK_DEV_GPIO_LEDS +config RT288X_MACH_WLI_TX4_AG300N + bool "Buffalo WLI-TX4-AG300N board support" + select RALINK_DEV_GPIO_BUTTONS + select RALINK_DEV_GPIO_LEDS + config RT288X_MACH_WZR_AGL300NH bool "Buffalo WZR-AGL300NH board support" select RALINK_DEV_GPIO_LEDS diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile index 103081aaa7..ab707018d2 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile @@ -14,5 +14,5 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o - +obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c new file mode 100644 index 0000000000..0f200ea298 --- /dev/null +++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c @@ -0,0 +1,154 @@ +/* + * Buffalo WLI-TX4-AG300N board support + * + * Copyright (C) 2011 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "devices.h" + +#define WLI_TX4_AG300N_GPIO_LED_DIAG 10 +#define WLI_TX4_AG300N_GPIO_LED_POWER 12 +#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13 + +#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0 +#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8 +#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9 + +#define WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL 20 + +#ifdef CONFIG_MTD_PARTITIONS +static struct mtd_partition wli_tx4_ag300n_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x030000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "u-boot-env", + .offset = 0x030000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "factory", + .offset = 0x040000, + .size = 0x010000, + .mask_flags = MTD_WRITEABLE, + }, + { + .name = "kernel", + .offset = 0x050000, + .size = 0x0d0000, + }, + { + .name = "rootfs", + .offset = 0x120000, + .size = 0x2d0000, + }, + { + .name = "user", + .offset = 0x3f0000, + .size = 0x010000, + }, + { + .name = "firmware", + .offset = 0x050000, + .size = 0x3a0000, + }, +}; +#endif /* CONFIG_MTD_PARTITIONS */ + +static struct physmap_flash_data wli_tx4_ag300n_flash_data = { +#ifdef CONFIG_MTD_PARTITIONS + .nr_parts = ARRAY_SIZE(wli_tx4_ag300n_partitions), + .parts = wli_tx4_ag300n_partitions, +#endif +}; + +static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = { + { + .name = "buffalo:blue:power", + .gpio = WLI_TX4_AG300N_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "buffalo:red:diag", + .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG, + .active_low = 1, + }, + { + .name = "buffalo:blue:security", + .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY, + .active_low = 0, + }, +}; + +static struct gpio_button wli_tx4_ag300n_gpio_buttons[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .threshold = 3, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET, + .active_low = 1, + }, + { + .desc = "AOSS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .threshold = 3, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS, + .active_low = 1, + }, + { + .desc = "Bandwidth switch", + .type = EV_KEY, + .code = BTN_0, + .threshold = 3, + .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH, + .active_low = 0, + }, +}; + +static void __init wli_tx4_ag300n_init(void) +{ + rt288x_gpio_init(RT2880_GPIO_MODE_UART0); + + ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio), + wli_tx4_ag300n_leds_gpio); + ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL, + ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons), + wli_tx4_ag300n_gpio_buttons); + + rt288x_register_flash(0, &wli_tx4_ag300n_flash_data); + rt288x_register_wifi(); + rt288x_register_wdt(); + + rt288x_eth_data.speed = SPEED_100; + rt288x_eth_data.duplex = DUPLEX_FULL; + rt288x_eth_data.tx_fc = 1; + rt288x_eth_data.rx_fc = 1; + rt288x_register_ethernet(); +} + +MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N", + "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init); diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 8f4e211255..a2845fd578 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -89,6 +89,10 @@ define BuildFirmware/Buffalo fi; fi endef +define BuildFirmware/Buffalo2 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6)) +endef + define BuildFirmware/NW718 $(call PatchKernelLzma,$(2),$(3) $($(4))) mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \ @@ -284,9 +288,15 @@ define Image/Build/Profile/RTN15 $(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15) endef +mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware) +define Image/Build/Profile/WLITX4AG300N + $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120) +endef + ifeq ($(CONFIG_RALINK_RT288X),y) define Image/Build/Profile/Default $(call Image/Build/Profile/RTN15,$(1)) + $(call Image/Build/Profile/WLITX4AG300N,$(1)) endef endif diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39 index 3936c066d6..a5fead5827 100644 --- a/target/linux/ramips/rt288x/config-2.6.39 +++ b/target/linux/ramips/rt288x/config-2.6.39 @@ -93,6 +93,7 @@ CONFIG_RALINK_RT288X=y # CONFIG_RALINK_RT305X is not set CONFIG_RAMIPS_WDT=y CONFIG_RT288X_MACH_RT_N15=y +CONFIG_RT288X_MACH_WLI_TX4_AG300N=y CONFIG_RT288X_MACH_WZR_AGL300NH=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8366_SMI=y