From: Gabor Juhos Date: Fri, 15 Mar 2013 16:06:28 +0000 (+0000) Subject: generic: ar8216: start AR8327 switch from the probe routine X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=72253b907330ab12ffbfca9761e95920579a0ffe;p=openwrt%2Fstaging%2Fansuel.git generic: ar8216: start AR8327 switch from the probe routine The AR8327 switch gets its configuration from platform data or from the device-tree. This allows to start it from the probe routine. Doing so makes it usable with ethernet drivers which only connects to the PHY device when the ethernet interface is opened. Signed-off-by: Gabor Juhos SVN-Revision: 36050 --- diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index f1b7436247..ccc074fdec 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -1945,6 +1945,9 @@ ar8xxx_phy_config_init(struct phy_device *phydev) if (WARN_ON(!priv)) return -ENODEV; + if (chip_is_ar8327(priv)) + return 0; + priv->phy = phydev; if (phydev->addr != 0) { @@ -2103,6 +2106,8 @@ ar8xxx_phy_probe(struct phy_device *phydev) swdev->devname, swdev->name, dev_name(&priv->mii_bus->dev)); found: + priv->use_count++; + if (phydev->addr == 0) { if (ar8xxx_has_gige(priv)) { phydev->supported = SUPPORTED_1000baseT_Full; @@ -2111,6 +2116,14 @@ found: phydev->supported = SUPPORTED_100baseT_Full; phydev->advertising = ADVERTISED_100baseT_Full; } + + if (chip_is_ar8327(priv)) { + priv->phy = phydev; + + ret = ar8xxx_start(priv); + if (ret) + goto err_unregister_switch; + } } else { if (ar8xxx_has_gige(priv)) { phydev->supported |= SUPPORTED_1000baseT_Full; @@ -2119,7 +2132,6 @@ found: } phydev->priv = priv; - priv->use_count++; list_add(&priv->list, &ar8xxx_dev_list); @@ -2127,6 +2139,12 @@ found: return 0; +err_unregister_switch: + if (--priv->use_count) + goto unlock; + + unregister_switch(&priv->dev); + free_priv: ar8xxx_free(priv); unlock: