From: Daniel Golle Date: Mon, 27 Mar 2023 17:14:21 +0000 (+0100) Subject: generic: net: pcs: add driver for MediaTek SGMII PCS X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=72094f74a6d855d9146df9dec2d73355c9c434be;p=openwrt%2Fstaging%2Fjow.git generic: net: pcs: add driver for MediaTek SGMII PCS Backport dedicated PCS driver for MediaTek LynxI SGMII/SerDes unit. Signed-off-by: Daniel Golle --- diff --git a/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch b/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch index 7690153d3d..e756fa2fff 100644 --- a/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch +++ b/target/linux/bcm27xx/patches-5.15/950-0281-media-i2c-Add-driver-for-Sony-IMX477-sensor.patch @@ -25,7 +25,7 @@ Signed-off-by: Naushir Patuck --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17530,6 +17530,14 @@ T: git git://linuxtv.org/media_tree.git +@@ -17538,6 +17538,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml F: drivers/media/i2c/imx412.c diff --git a/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch b/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch index d60c0f372c..27fd0e5793 100644 --- a/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch +++ b/target/linux/bcm27xx/patches-5.15/950-0413-Documentation-devicetree-Add-documentation-for-imx37.patch @@ -132,7 +132,7 @@ Signed-off-by: David Plowman +... --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17544,6 +17544,7 @@ M: Raspberry Pi Kernel Maintenance +... --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17548,6 +17548,14 @@ F: Documentation/devicetree/bindings/med +@@ -17556,6 +17556,14 @@ F: Documentation/devicetree/bindings/med F: Documentation/devicetree/bindings/media/i2c/imx477.yaml F: drivers/media/i2c/imx477.c diff --git a/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch b/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch new file mode 100644 index 0000000000..1f2a3ee140 --- /dev/null +++ b/target/linux/generic/backport-5.15/707-v6.3-net-pcs-add-driver-for-MediaTek-SGMII-PCS.patch @@ -0,0 +1,394 @@ +From 4765a9722e09765866e131ec31f7b9cf4c1f4854 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Sun, 19 Mar 2023 12:57:50 +0000 +Subject: [PATCH] net: pcs: add driver for MediaTek SGMII PCS + +The SGMII core found in several MediaTek SoCs is identical to what can +also be found in MediaTek's MT7531 Ethernet switch IC. +As this has not always been clear, both drivers developed different +implementations to deal with the PCS. +Recently Alexander Couzens pointed out this fact which lead to the +development of this shared driver. + +Add a dedicated driver, mostly by copying the code now found in the +Ethernet driver. The now redundant code will be removed by a follow-up +commit. + +Suggested-by: Alexander Couzens +Suggested-by: Russell King (Oracle) +Signed-off-by: Daniel Golle +Tested-by: Frank Wunderlich +Reviewed-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + MAINTAINERS | 8 + + drivers/net/pcs/Kconfig | 7 + + drivers/net/pcs/Makefile | 1 + + drivers/net/pcs/pcs-mtk-lynxi.c | 305 ++++++++++++++++++++++++++++++ + include/linux/pcs/pcs-mtk-lynxi.h | 13 ++ + 5 files changed, 334 insertions(+) + create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c + create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -11790,6 +11790,14 @@ L: netdev@vger.kernel.org + S: Maintained + F: drivers/net/ethernet/mediatek/ + ++MEDIATEK ETHERNET PCS DRIVER ++M: Alexander Couzens ++M: Daniel Golle ++L: netdev@vger.kernel.org ++S: Maintained ++F: drivers/net/pcs/pcs-mtk-lynxi.c ++F: include/linux/pcs/pcs-mtk-lynxi.h ++ + MEDIATEK I2C CONTROLLER DRIVER + M: Qii Wang + L: linux-i2c@vger.kernel.org +--- a/drivers/net/pcs/Kconfig ++++ b/drivers/net/pcs/Kconfig +@@ -18,4 +18,11 @@ config PCS_LYNX + This module provides helpers to phylink for managing the Lynx PCS + which is part of the Layerscape and QorIQ Ethernet SERDES. + ++config PCS_MTK_LYNXI ++ tristate ++ select REGMAP ++ help ++ This module provides helpers to phylink for managing the LynxI PCS ++ which is part of MediaTek's SoC and Ethernet switch ICs. ++ + endmenu +--- a/drivers/net/pcs/Makefile ++++ b/drivers/net/pcs/Makefile +@@ -5,3 +5,4 @@ pcs_xpcs-$(CONFIG_PCS_XPCS) := pcs-xpcs. + + obj-$(CONFIG_PCS_XPCS) += pcs_xpcs.o + obj-$(CONFIG_PCS_LYNX) += pcs-lynx.o ++obj-$(CONFIG_PCS_MTK_LYNXI) += pcs-mtk-lynxi.o +--- /dev/null ++++ b/drivers/net/pcs/pcs-mtk-lynxi.c +@@ -0,0 +1,305 @@ ++// SPDX-License-Identifier: GPL-2.0 ++// Copyright (c) 2018-2019 MediaTek Inc. ++/* A library for MediaTek SGMII circuit ++ * ++ * Author: Sean Wang ++ * Author: Alexander Couzens ++ * Author: Daniel Golle ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++/* SGMII subsystem config registers */ ++/* BMCR (low 16) BMSR (high 16) */ ++#define SGMSYS_PCS_CONTROL_1 0x0 ++#define SGMII_BMCR GENMASK(15, 0) ++#define SGMII_BMSR GENMASK(31, 16) ++ ++#define SGMSYS_PCS_DEVICE_ID 0x4 ++#define SGMII_LYNXI_DEV_ID 0x4d544950 ++ ++#define SGMSYS_PCS_ADVERTISE 0x8 ++#define SGMII_ADVERTISE GENMASK(15, 0) ++#define SGMII_LPA GENMASK(31, 16) ++ ++#define SGMSYS_PCS_SCRATCH 0x14 ++#define SGMII_DEV_VERSION GENMASK(31, 16) ++ ++/* Register to programmable link timer, the unit in 2 * 8ns */ ++#define SGMSYS_PCS_LINK_TIMER 0x18 ++#define SGMII_LINK_TIMER_MASK GENMASK(19, 0) ++#define SGMII_LINK_TIMER_VAL(ns) FIELD_PREP(SGMII_LINK_TIMER_MASK, \ ++ ((ns) / 2 / 8)) ++ ++/* Register to control remote fault */ ++#define SGMSYS_SGMII_MODE 0x20 ++#define SGMII_IF_MODE_SGMII BIT(0) ++#define SGMII_SPEED_DUPLEX_AN BIT(1) ++#define SGMII_SPEED_MASK GENMASK(3, 2) ++#define SGMII_SPEED_10 FIELD_PREP(SGMII_SPEED_MASK, 0) ++#define SGMII_SPEED_100 FIELD_PREP(SGMII_SPEED_MASK, 1) ++#define SGMII_SPEED_1000 FIELD_PREP(SGMII_SPEED_MASK, 2) ++#define SGMII_DUPLEX_HALF BIT(4) ++#define SGMII_REMOTE_FAULT_DIS BIT(8) ++ ++/* Register to reset SGMII design */ ++#define SGMSYS_RESERVED_0 0x34 ++#define SGMII_SW_RESET BIT(0) ++ ++/* Register to set SGMII speed, ANA RG_ Control Signals III */ ++#define SGMII_PHY_SPEED_MASK GENMASK(3, 2) ++#define SGMII_PHY_SPEED_1_25G FIELD_PREP(SGMII_PHY_SPEED_MASK, 0) ++#define SGMII_PHY_SPEED_3_125G FIELD_PREP(SGMII_PHY_SPEED_MASK, 1) ++ ++/* Register to power up QPHY */ ++#define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8 ++#define SGMII_PHYA_PWD BIT(4) ++ ++/* Register to QPHY wrapper control */ ++#define SGMSYS_QPHY_WRAP_CTRL 0xec ++#define SGMII_PN_SWAP_MASK GENMASK(1, 0) ++#define SGMII_PN_SWAP_TX_RX (BIT(0) | BIT(1)) ++ ++/* struct mtk_pcs_lynxi - This structure holds each sgmii regmap andassociated ++ * data ++ * @regmap: The register map pointing at the range used to setup ++ * SGMII modes ++ * @dev: Pointer to device owning the PCS ++ * @ana_rgc3: The offset of register ANA_RGC3 relative to regmap ++ * @interface: Currently configured interface mode ++ * @pcs: Phylink PCS structure ++ * @flags: Flags indicating hardware properties ++ */ ++struct mtk_pcs_lynxi { ++ struct regmap *regmap; ++ u32 ana_rgc3; ++ phy_interface_t interface; ++ struct phylink_pcs pcs; ++ u32 flags; ++}; ++ ++static struct mtk_pcs_lynxi *pcs_to_mtk_pcs_lynxi(struct phylink_pcs *pcs) ++{ ++ return container_of(pcs, struct mtk_pcs_lynxi, pcs); ++} ++ ++static void mtk_pcs_lynxi_get_state(struct phylink_pcs *pcs, ++ struct phylink_link_state *state) ++{ ++ struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs); ++ unsigned int bm, adv; ++ ++ /* Read the BMSR and LPA */ ++ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &bm); ++ regmap_read(mpcs->regmap, SGMSYS_PCS_ADVERTISE, &adv); ++ ++ phylink_mii_c22_pcs_decode_state(state, FIELD_GET(SGMII_BMSR, bm), ++ FIELD_GET(SGMII_LPA, adv)); ++} ++ ++static int mtk_pcs_lynxi_config(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, ++ const unsigned long *advertising, ++ bool permit_pause_to_mac) ++{ ++ struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs); ++ bool mode_changed = false, changed, use_an; ++ unsigned int rgc3, sgm_mode, bmcr; ++ int advertise, link_timer; ++ ++ advertise = phylink_mii_c22_pcs_encode_advertisement(interface, ++ advertising); ++ if (advertise < 0) ++ return advertise; ++ ++ /* Clearing IF_MODE_BIT0 switches the PCS to BASE-X mode, and ++ * we assume that fixes it's speed at bitrate = line rate (in ++ * other words, 1000Mbps or 2500Mbps). ++ */ ++ if (interface == PHY_INTERFACE_MODE_SGMII) { ++ sgm_mode = SGMII_IF_MODE_SGMII; ++ if (phylink_autoneg_inband(mode)) { ++ sgm_mode |= SGMII_REMOTE_FAULT_DIS | ++ SGMII_SPEED_DUPLEX_AN; ++ use_an = true; ++ } else { ++ use_an = false; ++ } ++ } else if (phylink_autoneg_inband(mode)) { ++ /* 1000base-X or 2500base-X autoneg */ ++ sgm_mode = SGMII_REMOTE_FAULT_DIS; ++ use_an = linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, ++ advertising); ++ } else { ++ /* 1000base-X or 2500base-X without autoneg */ ++ sgm_mode = 0; ++ use_an = false; ++ } ++ ++ if (use_an) ++ bmcr = BMCR_ANENABLE; ++ else ++ bmcr = 0; ++ ++ if (mpcs->interface != interface) { ++ link_timer = phylink_get_link_timer_ns(interface); ++ if (link_timer < 0) ++ return link_timer; ++ ++ /* PHYA power down */ ++ regmap_set_bits(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, ++ SGMII_PHYA_PWD); ++ ++ /* Reset SGMII PCS state */ ++ regmap_set_bits(mpcs->regmap, SGMSYS_RESERVED_0, ++ SGMII_SW_RESET); ++ ++ if (mpcs->flags & MTK_SGMII_FLAG_PN_SWAP) ++ regmap_update_bits(mpcs->regmap, SGMSYS_QPHY_WRAP_CTRL, ++ SGMII_PN_SWAP_MASK, ++ SGMII_PN_SWAP_TX_RX); ++ ++ if (interface == PHY_INTERFACE_MODE_2500BASEX) ++ rgc3 = SGMII_PHY_SPEED_3_125G; ++ else ++ rgc3 = SGMII_PHY_SPEED_1_25G; ++ ++ /* Configure the underlying interface speed */ ++ regmap_update_bits(mpcs->regmap, mpcs->ana_rgc3, ++ SGMII_PHY_SPEED_MASK, rgc3); ++ ++ /* Setup the link timer */ ++ regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, ++ SGMII_LINK_TIMER_VAL(link_timer)); ++ ++ mpcs->interface = interface; ++ mode_changed = true; ++ } ++ ++ /* Update the advertisement, noting whether it has changed */ ++ regmap_update_bits_check(mpcs->regmap, SGMSYS_PCS_ADVERTISE, ++ SGMII_ADVERTISE, advertise, &changed); ++ ++ /* Update the sgmsys mode register */ ++ regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE, ++ SGMII_REMOTE_FAULT_DIS | SGMII_SPEED_DUPLEX_AN | ++ SGMII_IF_MODE_SGMII, sgm_mode); ++ ++ /* Update the BMCR */ ++ regmap_update_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, ++ BMCR_ANENABLE, bmcr); ++ ++ /* Release PHYA power down state ++ * Only removing bit SGMII_PHYA_PWD isn't enough. ++ * There are cases when the SGMII_PHYA_PWD register contains 0x9 which ++ * prevents SGMII from working. The SGMII still shows link but no traffic ++ * can flow. Writing 0x0 to the PHYA_PWD register fix the issue. 0x0 was ++ * taken from a good working state of the SGMII interface. ++ * Unknown how much the QPHY needs but it is racy without a sleep. ++ * Tested on mt7622 & mt7986. ++ */ ++ usleep_range(50, 100); ++ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, 0); ++ ++ return changed || mode_changed; ++} ++ ++static void mtk_pcs_lynxi_restart_an(struct phylink_pcs *pcs) ++{ ++ struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs); ++ ++ regmap_set_bits(mpcs->regmap, SGMSYS_PCS_CONTROL_1, BMCR_ANRESTART); ++} ++ ++static void mtk_pcs_lynxi_link_up(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, int speed, ++ int duplex) ++{ ++ struct mtk_pcs_lynxi *mpcs = pcs_to_mtk_pcs_lynxi(pcs); ++ unsigned int sgm_mode; ++ ++ if (!phylink_autoneg_inband(mode)) { ++ /* Force the speed and duplex setting */ ++ if (speed == SPEED_10) ++ sgm_mode = SGMII_SPEED_10; ++ else if (speed == SPEED_100) ++ sgm_mode = SGMII_SPEED_100; ++ else ++ sgm_mode = SGMII_SPEED_1000; ++ ++ if (duplex != DUPLEX_FULL) ++ sgm_mode |= SGMII_DUPLEX_HALF; ++ ++ regmap_update_bits(mpcs->regmap, SGMSYS_SGMII_MODE, ++ SGMII_DUPLEX_HALF | SGMII_SPEED_MASK, ++ sgm_mode); ++ } ++} ++ ++static const struct phylink_pcs_ops mtk_pcs_lynxi_ops = { ++ .pcs_get_state = mtk_pcs_lynxi_get_state, ++ .pcs_config = mtk_pcs_lynxi_config, ++ .pcs_an_restart = mtk_pcs_lynxi_restart_an, ++ .pcs_link_up = mtk_pcs_lynxi_link_up, ++}; ++ ++struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev, ++ struct regmap *regmap, u32 ana_rgc3, ++ u32 flags) ++{ ++ struct mtk_pcs_lynxi *mpcs; ++ u32 id, ver; ++ int ret; ++ ++ ret = regmap_read(regmap, SGMSYS_PCS_DEVICE_ID, &id); ++ if (ret < 0) ++ return NULL; ++ ++ if (id != SGMII_LYNXI_DEV_ID) { ++ dev_err(dev, "unknown PCS device id %08x\n", id); ++ return NULL; ++ } ++ ++ ret = regmap_read(regmap, SGMSYS_PCS_SCRATCH, &ver); ++ if (ret < 0) ++ return NULL; ++ ++ ver = FIELD_GET(SGMII_DEV_VERSION, ver); ++ if (ver != 0x1) { ++ dev_err(dev, "unknown PCS device version %04x\n", ver); ++ return NULL; ++ } ++ ++ dev_dbg(dev, "MediaTek LynxI SGMII PCS (id 0x%08x, ver 0x%04x)\n", id, ++ ver); ++ ++ mpcs = kzalloc(sizeof(*mpcs), GFP_KERNEL); ++ if (!mpcs) ++ return NULL; ++ ++ mpcs->ana_rgc3 = ana_rgc3; ++ mpcs->regmap = regmap; ++ mpcs->flags = flags; ++ mpcs->pcs.ops = &mtk_pcs_lynxi_ops; ++ mpcs->pcs.poll = true; ++ mpcs->interface = PHY_INTERFACE_MODE_NA; ++ ++ return &mpcs->pcs; ++} ++EXPORT_SYMBOL(mtk_pcs_lynxi_create); ++ ++void mtk_pcs_lynxi_destroy(struct phylink_pcs *pcs) ++{ ++ if (!pcs) ++ return; ++ ++ kfree(pcs_to_mtk_pcs_lynxi(pcs)); ++} ++EXPORT_SYMBOL(mtk_pcs_lynxi_destroy); ++ ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/include/linux/pcs/pcs-mtk-lynxi.h +@@ -0,0 +1,13 @@ ++/* SPDX-License-Identifier: GPL-2.0 */ ++#ifndef __LINUX_PCS_MTK_LYNXI_H ++#define __LINUX_PCS_MTK_LYNXI_H ++ ++#include ++#include ++ ++#define MTK_SGMII_FLAG_PN_SWAP BIT(0) ++struct phylink_pcs *mtk_pcs_lynxi_create(struct device *dev, ++ struct regmap *regmap, ++ u32 ana_rgc3, u32 flags); ++void mtk_pcs_lynxi_destroy(struct phylink_pcs *pcs); ++#endif diff --git a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch index a4c1b66c9e..2a9dc74947 100644 --- a/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch +++ b/target/linux/generic/backport-5.15/804-v5.18-0009-nvmem-Add-driver-for-OCOTP-in-Sunplus-SP7021.patch @@ -19,7 +19,7 @@ Signed-off-by: Greg Kroah-Hartman --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -17954,6 +17954,11 @@ L: netdev@vger.kernel.org +@@ -17962,6 +17962,11 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/dlink/sundance.c diff --git a/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch b/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch index 6503c7aa3b..cec66ec383 100644 --- a/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch +++ b/target/linux/generic/backport-5.15/806-v6.0-0001-nvmem-microchip-otpc-add-support.patch @@ -57,7 +57,7 @@ Signed-off-by: Greg Kroah-Hartman --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -12354,6 +12354,14 @@ S: Supported +@@ -12362,6 +12362,14 @@ S: Supported F: Documentation/devicetree/bindings/mtd/atmel-nand.txt F: drivers/mtd/nand/raw/atmel/* diff --git a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch index 4909d9e922..f2145dbc16 100644 --- a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch +++ b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch @@ -17,9 +17,9 @@ Signed-off-by: Daniel Golle --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -11790,6 +11790,14 @@ L: netdev@vger.kernel.org - S: Maintained - F: drivers/net/ethernet/mediatek/ +@@ -11798,6 +11798,14 @@ S: Maintained + F: drivers/net/pcs/pcs-mtk-lynxi.c + F: include/linux/pcs/pcs-mtk-lynxi.h +MEDIATEK ETHERNET PHY DRIVERS +M: Daniel Golle diff --git a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch index 93f0fe5cf4..e562dd8396 100644 --- a/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch +++ b/target/linux/realtek/patches-5.15/008-5.17-watchdog-add-realtek-otto-watchdog-timer.patch @@ -32,7 +32,7 @@ Signed-off-by: Guenter Roeck --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -15891,6 +15891,13 @@ S: Maintained +@@ -15899,6 +15899,13 @@ S: Maintained F: include/sound/rt*.h F: sound/soc/codecs/rt* diff --git a/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch b/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch index 71724034d4..8f40001263 100644 --- a/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch +++ b/target/linux/realtek/patches-5.15/700-net-dsa-add-support-for-rtl838x-switch.patch @@ -22,7 +22,7 @@ Submitted-by: John Crispin --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig -@@ -60,6 +60,8 @@ source "drivers/net/dsa/sja1105/Kconfig" +@@ -61,6 +61,8 @@ source "drivers/net/dsa/sja1105/Kconfig" source "drivers/net/dsa/xrs700x/Kconfig" diff --git a/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch b/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch index 1cea91e0d1..591f0cea13 100644 --- a/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch +++ b/target/linux/realtek/patches-5.15/704-drivers-net-phy-eee-support-for-rtl838x.patch @@ -21,7 +21,7 @@ Submitted-by: John Crispin --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -1943,6 +1943,11 @@ int phylink_ethtool_ksettings_set(struct +@@ -1942,6 +1942,11 @@ int phylink_ethtool_ksettings_set(struct * the presence of a PHY, this should not be changed as that * should be determined from the media side advertisement. */ @@ -33,7 +33,7 @@ Submitted-by: John Crispin return phy_ethtool_ksettings_set(pl->phydev, kset); } -@@ -2246,8 +2251,11 @@ int phylink_ethtool_get_eee(struct phyli +@@ -2245,8 +2250,11 @@ int phylink_ethtool_get_eee(struct phyli ASSERT_RTNL(); @@ -46,7 +46,7 @@ Submitted-by: John Crispin return ret; } -@@ -2264,8 +2272,11 @@ int phylink_ethtool_set_eee(struct phyli +@@ -2263,8 +2271,11 @@ int phylink_ethtool_set_eee(struct phyli ASSERT_RTNL();