From: Matthew Garrett Date: Tue, 27 Jan 2009 01:03:35 +0000 (+0000) Subject: PCI hotplug: Change link order of pciehp & acpiphp X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=71a082efc9fdc12068a3cee6cebb1330b00ebeee;p=openwrt%2Fstaging%2Fblogic.git PCI hotplug: Change link order of pciehp & acpiphp Some hardware exposes PCIE slots in such a way that they can be claimed by either the acpiphp or pciehp driver. pciehp is the preferred driver if the firmware allows the OS to claim control via the _OSC method so should be loaded first - if it fails to bind (either due to a missing _OSC method or the firmware refusing to hand off control) then we can fall back to acpiphp or a vendor-specific driver. This patch simply changes the link order to ensure that pciehp will be initialised before acpiphp if both are statically built into the kernel. Signed-off-by: Matthew Garrett Acked-by: Randy Dunlap Signed-off-by: Jesse Barnes --- diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index e31fb91652ce..2aa117c8cd87 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -5,11 +5,15 @@ obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o obj-$(CONFIG_HOTPLUG_PCI_COMPAQ) += cpqphp.o obj-$(CONFIG_HOTPLUG_PCI_IBM) += ibmphp.o + +# pciehp should be linked before acpiphp in order to allow the native driver +# to attempt to bind first. We can then fall back to generic support. + +obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM) += acpiphp_ibm.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_ZT5550) += cpcihp_zt5550.o obj-$(CONFIG_HOTPLUG_PCI_CPCI_GENERIC) += cpcihp_generic.o -obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o