From: Sander Vanheule <sander@svanheule.net>
Date: Sat, 18 Jun 2022 13:43:33 +0000 (+0200)
Subject: ath79: TP-Link EAP225 v3: use pre-calibration nvmem-cell
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=7154a1dc7b9f1b01f30ef0281e65c952c89d375b;p=openwrt%2Fstaging%2Fblocktrron.git

ath79: TP-Link EAP225 v3: use pre-calibration nvmem-cell

ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration"
to load the device specific caldata, not "calibration". Rename the nvmem
cell node and label to match the updated cell name.

Fixes: eca0d7301198 ("ath79: TP-Link EAP225 v3: convert ath10k to nvmem-cells")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
---

diff --git a/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts b/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts
index 8df6b813eb..290172b0cc 100644
--- a/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts
+++ b/target/linux/ath79/dts/qca9563_tplink_eap225-v3.dts
@@ -30,7 +30,7 @@
 };
 
 &art {
-	calibration_ath10k: calibration@5000 {
+	precalibration_ath10k: pre-calibration@5000 {
 		reg = <0x5000 0x2f20>;
 	};
 };
@@ -54,7 +54,7 @@
 
 		mac-address-increment = <1>;
 
-		nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>;
-		nvmem-cell-names = "mac-address", "calibration";
+		nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>;
+		nvmem-cell-names = "mac-address", "pre-calibration";
 	};
 };