From: Russell King Date: Thu, 21 May 2020 08:57:27 +0000 (+0100) Subject: kernel: backport v5.8 i2c-pxa updates X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=714199ec3461b2b5bac9796d4f5ee79f56d2eb00;p=openwrt%2Fstaging%2Flynxis.git kernel: backport v5.8 i2c-pxa updates Add i2c-pxa updates queued for v5.8, which add bus recovery to this driver; this is needed for the uDPU platform. Signed-off-by: Russell King --- diff --git a/target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch b/target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch new file mode 100644 index 0000000000..8aaa6c9b3c --- /dev/null +++ b/target/linux/generic/backport-5.4/803-v5.8-i2c-pxa-use-official-address-byte-helper.patch @@ -0,0 +1,64 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 01/17] i2c: pxa: use official address byte helper +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +i2c-pxa was created before i2c_8bit_addr_from_msg() was implemented, +and used its own i2c_pxa_addr_byte() which is functionally the same. +Sadly, it was never updated to use this new helper. Switch it over. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 21 +++++++-------------- + 1 file changed, 7 insertions(+), 14 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 2c3c3d6935c0..966000923e8e 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -675,16 +675,6 @@ static void i2c_pxa_slave_stop(struct pxa_i2c *i2c) + * PXA I2C Master mode + */ + +-static inline unsigned int i2c_pxa_addr_byte(struct i2c_msg *msg) +-{ +- unsigned int addr = (msg->addr & 0x7f) << 1; +- +- if (msg->flags & I2C_M_RD) +- addr |= 1; +- +- return addr; +-} +- + static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) + { + u32 icr; +@@ -693,8 +683,8 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) + /* + * Step 1: target slave address into IDBR + */ +- writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); +- i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); ++ i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg); ++ writel(i2c->req_slave_addr, _IDBR(i2c)); + + /* + * Step 2: initiate the write. +@@ -1006,8 +999,8 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) + /* + * Write the next address. + */ +- writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); +- i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); ++ i2c->req_slave_addr = i2c_8bit_addr_from_msg(i2c->msg); ++ writel(i2c->req_slave_addr, _IDBR(i2c)); + + /* + * And trigger a repeated start, and send the byte. +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/804-v5.8-i2c-pxa-remove-unneeded-includes.patch b/target/linux/generic/backport-5.4/804-v5.8-i2c-pxa-remove-unneeded-includes.patch new file mode 100644 index 0000000000..ed4a3d5928 --- /dev/null +++ b/target/linux/generic/backport-5.4/804-v5.8-i2c-pxa-remove-unneeded-includes.patch @@ -0,0 +1,42 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 02/17] i2c: pxa: remove unneeded includes +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +i2c-pxa does not need linux/sched.h nor linux/time.h includes, so +remove these. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 4 ---- + 1 file changed, 4 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 966000923e8e..eddb749c9eae 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -20,8 +20,6 @@ + #include + #include + #include +-#include +-#include + #include + #include + #include +@@ -35,8 +33,6 @@ + #include + #include + +-#include +- + struct pxa_reg_layout { + u32 ibmr; + u32 idbr; +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/805-v5.8-i2c-pxa-re-arrange-includes-to-be-in-alphabetical-or.patch b/target/linux/generic/backport-5.4/805-v5.8-i2c-pxa-re-arrange-includes-to-be-in-alphabetical-or.patch new file mode 100644 index 0000000000..ccca8d1dc7 --- /dev/null +++ b/target/linux/generic/backport-5.4/805-v5.8-i2c-pxa-re-arrange-includes-to-be-in-alphabetical-or.patch @@ -0,0 +1,57 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 03/17] i2c: pxa: re-arrange includes to be in alphabetical + order +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Arrange the includes to be in alphabetical order to help avoid +duplicated includes. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index eddb749c9eae..ee83d2e46de0 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -16,22 +16,22 @@ + * Dec 2004: Added support for PXA27x and slave device probing [Liam Girdwood] + * Feb 2005: Rework slave mode handling [RMK] + */ +-#include +-#include +-#include +-#include ++#include + #include ++#include + #include +-#include ++#include + #include ++#include ++#include ++#include ++#include ++#include + #include + #include + #include +-#include +-#include +-#include +-#include + #include ++#include + + struct pxa_reg_layout { + u32 ibmr; +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch b/target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch new file mode 100644 index 0000000000..efe7071de4 --- /dev/null +++ b/target/linux/generic/backport-5.4/806-v5.8-i2c-pxa-re-arrange-functions-to-flow-better.patch @@ -0,0 +1,385 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 04/17] i2c: pxa: re-arrange functions to flow better +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Re-arrange the PXA I2C code to avoid forward declarations, and keep +similar functionality (e.g. the non-IRQ mode support) together. This +improves code readability. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 325 +++++++++++++++++------------------ + 1 file changed, 162 insertions(+), 163 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index ee83d2e46de0..e5f00ae39861 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -327,7 +327,6 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) + #endif /* ifdef DEBUG / else */ + + static void i2c_pxa_master_complete(struct pxa_i2c *i2c, int ret); +-static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id); + + static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c) + { +@@ -703,34 +702,6 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) + writel(icr, _ICR(i2c)); + } + +-static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) +-{ +- /* make timeout the same as for interrupt based functions */ +- long timeout = 2 * DEF_TIMEOUT; +- +- /* +- * Wait for the bus to become free. +- */ +- while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { +- udelay(1000); +- show_state(i2c); +- } +- +- if (timeout < 0) { +- show_state(i2c); +- dev_err(&i2c->adap.dev, +- "i2c_pxa: timeout waiting for bus free\n"); +- return I2C_RETRY; +- } +- +- /* +- * Set master mode. +- */ +- writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); +- +- return 0; +-} +- + /* + * PXA I2C send master code + * 1. Load master code to IDBR and send it. +@@ -759,140 +730,6 @@ static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c) + return (timeout == 0) ? I2C_RETRY : 0; + } + +-static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, +- struct i2c_msg *msg, int num) +-{ +- unsigned long timeout = 500000; /* 5 seconds */ +- int ret = 0; +- +- ret = i2c_pxa_pio_set_master(i2c); +- if (ret) +- goto out; +- +- i2c->msg = msg; +- i2c->msg_num = num; +- i2c->msg_idx = 0; +- i2c->msg_ptr = 0; +- i2c->irqlogidx = 0; +- +- i2c_pxa_start_message(i2c); +- +- while (i2c->msg_num > 0 && --timeout) { +- i2c_pxa_handler(0, i2c); +- udelay(10); +- } +- +- i2c_pxa_stop_message(i2c); +- +- /* +- * We place the return code in i2c->msg_idx. +- */ +- ret = i2c->msg_idx; +- +-out: +- if (timeout == 0) { +- i2c_pxa_scream_blue_murder(i2c, "timeout"); +- ret = I2C_RETRY; +- } +- +- return ret; +-} +- +-/* +- * We are protected by the adapter bus mutex. +- */ +-static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) +-{ +- long timeout; +- int ret; +- +- /* +- * Wait for the bus to become free. +- */ +- ret = i2c_pxa_wait_bus_not_busy(i2c); +- if (ret) { +- dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); +- goto out; +- } +- +- /* +- * Set master mode. +- */ +- ret = i2c_pxa_set_master(i2c); +- if (ret) { +- dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); +- goto out; +- } +- +- if (i2c->high_mode) { +- ret = i2c_pxa_send_mastercode(i2c); +- if (ret) { +- dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); +- goto out; +- } +- } +- +- spin_lock_irq(&i2c->lock); +- +- i2c->msg = msg; +- i2c->msg_num = num; +- i2c->msg_idx = 0; +- i2c->msg_ptr = 0; +- i2c->irqlogidx = 0; +- +- i2c_pxa_start_message(i2c); +- +- spin_unlock_irq(&i2c->lock); +- +- /* +- * The rest of the processing occurs in the interrupt handler. +- */ +- timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); +- i2c_pxa_stop_message(i2c); +- +- /* +- * We place the return code in i2c->msg_idx. +- */ +- ret = i2c->msg_idx; +- +- if (!timeout && i2c->msg_num) { +- i2c_pxa_scream_blue_murder(i2c, "timeout"); +- ret = I2C_RETRY; +- } +- +- out: +- return ret; +-} +- +-static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, +- struct i2c_msg msgs[], int num) +-{ +- struct pxa_i2c *i2c = adap->algo_data; +- int ret, i; +- +- /* If the I2C controller is disabled we need to reset it +- (probably due to a suspend/resume destroying state). We do +- this here as we can then avoid worrying about resuming the +- controller before its users. */ +- if (!(readl(_ICR(i2c)) & ICR_IUE)) +- i2c_pxa_reset(i2c); +- +- for (i = adap->retries; i >= 0; i--) { +- ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); +- if (ret != I2C_RETRY) +- goto out; +- +- if (i2c_debug) +- dev_dbg(&adap->dev, "Retrying transmission\n"); +- udelay(100); +- } +- i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); +- ret = -EREMOTEIO; +- out: +- i2c_pxa_set_slave(i2c, ret); +- return ret; +-} +- + /* + * i2c_pxa_master_complete - complete the message and wake up. + */ +@@ -1099,6 +936,71 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id) + return IRQ_HANDLED; + } + ++/* ++ * We are protected by the adapter bus mutex. ++ */ ++static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) ++{ ++ long timeout; ++ int ret; ++ ++ /* ++ * Wait for the bus to become free. ++ */ ++ ret = i2c_pxa_wait_bus_not_busy(i2c); ++ if (ret) { ++ dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); ++ goto out; ++ } ++ ++ /* ++ * Set master mode. ++ */ ++ ret = i2c_pxa_set_master(i2c); ++ if (ret) { ++ dev_err(&i2c->adap.dev, "i2c_pxa_set_master: error %d\n", ret); ++ goto out; ++ } ++ ++ if (i2c->high_mode) { ++ ret = i2c_pxa_send_mastercode(i2c); ++ if (ret) { ++ dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n"); ++ goto out; ++ } ++ } ++ ++ spin_lock_irq(&i2c->lock); ++ ++ i2c->msg = msg; ++ i2c->msg_num = num; ++ i2c->msg_idx = 0; ++ i2c->msg_ptr = 0; ++ i2c->irqlogidx = 0; ++ ++ i2c_pxa_start_message(i2c); ++ ++ spin_unlock_irq(&i2c->lock); ++ ++ /* ++ * The rest of the processing occurs in the interrupt handler. ++ */ ++ timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); ++ i2c_pxa_stop_message(i2c); ++ ++ /* ++ * We place the return code in i2c->msg_idx. ++ */ ++ ret = i2c->msg_idx; ++ ++ if (!timeout && i2c->msg_num) { ++ i2c_pxa_scream_blue_murder(i2c, "timeout"); ++ ret = I2C_RETRY; ++ } ++ ++ out: ++ return ret; ++} + + static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) + { +@@ -1132,6 +1034,103 @@ static const struct i2c_algorithm i2c_pxa_algorithm = { + .functionality = i2c_pxa_functionality, + }; + ++/* Non-interrupt mode support */ ++static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) ++{ ++ /* make timeout the same as for interrupt based functions */ ++ long timeout = 2 * DEF_TIMEOUT; ++ ++ /* ++ * Wait for the bus to become free. ++ */ ++ while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { ++ udelay(1000); ++ show_state(i2c); ++ } ++ ++ if (timeout < 0) { ++ show_state(i2c); ++ dev_err(&i2c->adap.dev, ++ "i2c_pxa: timeout waiting for bus free\n"); ++ return I2C_RETRY; ++ } ++ ++ /* ++ * Set master mode. ++ */ ++ writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c)); ++ ++ return 0; ++} ++ ++static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, ++ struct i2c_msg *msg, int num) ++{ ++ unsigned long timeout = 500000; /* 5 seconds */ ++ int ret = 0; ++ ++ ret = i2c_pxa_pio_set_master(i2c); ++ if (ret) ++ goto out; ++ ++ i2c->msg = msg; ++ i2c->msg_num = num; ++ i2c->msg_idx = 0; ++ i2c->msg_ptr = 0; ++ i2c->irqlogidx = 0; ++ ++ i2c_pxa_start_message(i2c); ++ ++ while (i2c->msg_num > 0 && --timeout) { ++ i2c_pxa_handler(0, i2c); ++ udelay(10); ++ } ++ ++ i2c_pxa_stop_message(i2c); ++ ++ /* ++ * We place the return code in i2c->msg_idx. ++ */ ++ ret = i2c->msg_idx; ++ ++out: ++ if (timeout == 0) { ++ i2c_pxa_scream_blue_murder(i2c, "timeout"); ++ ret = I2C_RETRY; ++ } ++ ++ return ret; ++} ++ ++static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, ++ struct i2c_msg msgs[], int num) ++{ ++ struct pxa_i2c *i2c = adap->algo_data; ++ int ret, i; ++ ++ /* If the I2C controller is disabled we need to reset it ++ (probably due to a suspend/resume destroying state). We do ++ this here as we can then avoid worrying about resuming the ++ controller before its users. */ ++ if (!(readl(_ICR(i2c)) & ICR_IUE)) ++ i2c_pxa_reset(i2c); ++ ++ for (i = adap->retries; i >= 0; i--) { ++ ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); ++ if (ret != I2C_RETRY) ++ goto out; ++ ++ if (i2c_debug) ++ dev_dbg(&adap->dev, "Retrying transmission\n"); ++ udelay(100); ++ } ++ i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); ++ ret = -EREMOTEIO; ++ out: ++ i2c_pxa_set_slave(i2c, ret); ++ return ret; ++} ++ + static const struct i2c_algorithm i2c_pxa_pio_algorithm = { + .master_xfer = i2c_pxa_pio_xfer, + .functionality = i2c_pxa_functionality, +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/807-v5.8-i2c-pxa-re-arrange-register-field-definitions.patch b/target/linux/generic/backport-5.4/807-v5.8-i2c-pxa-re-arrange-register-field-definitions.patch new file mode 100644 index 0000000000..348da2a5f2 --- /dev/null +++ b/target/linux/generic/backport-5.4/807-v5.8-i2c-pxa-re-arrange-register-field-definitions.patch @@ -0,0 +1,166 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 05/17] i2c: pxa: re-arrange register field definitions +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Arrange the register field definitions to be grouped together, rather +than the Armada-3700 definitions being separated from the rest of the +definitions. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 113 ++++++++++++++++------------------- + 1 file changed, 53 insertions(+), 60 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index e5f00ae39861..ea96dfa6b9d5 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -33,6 +33,56 @@ + #include + #include + ++/* I2C register field definitions */ ++#define ICR_START (1 << 0) /* start bit */ ++#define ICR_STOP (1 << 1) /* stop bit */ ++#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ ++#define ICR_TB (1 << 3) /* transfer byte bit */ ++#define ICR_MA (1 << 4) /* master abort */ ++#define ICR_SCLE (1 << 5) /* master clock enable */ ++#define ICR_IUE (1 << 6) /* unit enable */ ++#define ICR_GCD (1 << 7) /* general call disable */ ++#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ ++#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ ++#define ICR_BEIE (1 << 10) /* enable bus error ints */ ++#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ ++#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ ++#define ICR_SADIE (1 << 13) /* slave address detected int enable */ ++#define ICR_UR (1 << 14) /* unit reset */ ++#define ICR_FM (1 << 15) /* fast mode */ ++#define ICR_HS (1 << 16) /* High Speed mode */ ++#define ICR_A3700_FM (1 << 16) /* fast mode for armada-3700 */ ++#define ICR_A3700_HS (1 << 17) /* high speed mode for armada-3700 */ ++#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */ ++ ++#define ISR_RWM (1 << 0) /* read/write mode */ ++#define ISR_ACKNAK (1 << 1) /* ack/nak status */ ++#define ISR_UB (1 << 2) /* unit busy */ ++#define ISR_IBB (1 << 3) /* bus busy */ ++#define ISR_SSD (1 << 4) /* slave stop detected */ ++#define ISR_ALD (1 << 5) /* arbitration loss detected */ ++#define ISR_ITE (1 << 6) /* tx buffer empty */ ++#define ISR_IRF (1 << 7) /* rx buffer full */ ++#define ISR_GCAD (1 << 8) /* general call address detected */ ++#define ISR_SAD (1 << 9) /* slave address detected */ ++#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ ++ ++#define ILCR_SLV_SHIFT 0 ++#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT) ++#define ILCR_FLV_SHIFT 9 ++#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT) ++#define ILCR_HLVL_SHIFT 18 ++#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT) ++#define ILCR_HLVH_SHIFT 27 ++#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT) ++ ++#define IWCR_CNT_SHIFT 0 ++#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT) ++#define IWCR_HS_CNT1_SHIFT 5 ++#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT) ++#define IWCR_HS_CNT2_SHIFT 10 ++#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) ++ + struct pxa_reg_layout { + u32 ibmr; + u32 idbr; +@@ -53,12 +103,7 @@ enum pxa_i2c_types { + REGS_A3700, + }; + +-#define ICR_BUSMODE_FM (1 << 16) /* shifted fast mode for armada-3700 */ +-#define ICR_BUSMODE_HS (1 << 17) /* shifted high speed mode for armada-3700 */ +- +-/* +- * I2C registers definitions +- */ ++/* I2C register layout definitions */ + static struct pxa_reg_layout pxa_reg_layout[] = { + [REGS_PXA2XX] = { + .ibmr = 0x00, +@@ -96,8 +141,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = { + .icr = 0x08, + .isr = 0x0c, + .isar = 0x10, +- .fm = ICR_BUSMODE_FM, +- .hs = ICR_BUSMODE_HS, ++ .fm = ICR_A3700_FM, ++ .hs = ICR_A3700_HS, + }, + }; + +@@ -111,58 +156,6 @@ static const struct platform_device_id i2c_pxa_id_table[] = { + }; + MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); + +-/* +- * I2C bit definitions +- */ +- +-#define ICR_START (1 << 0) /* start bit */ +-#define ICR_STOP (1 << 1) /* stop bit */ +-#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +-#define ICR_TB (1 << 3) /* transfer byte bit */ +-#define ICR_MA (1 << 4) /* master abort */ +-#define ICR_SCLE (1 << 5) /* master clock enable */ +-#define ICR_IUE (1 << 6) /* unit enable */ +-#define ICR_GCD (1 << 7) /* general call disable */ +-#define ICR_ITEIE (1 << 8) /* enable tx interrupts */ +-#define ICR_IRFIE (1 << 9) /* enable rx interrupts */ +-#define ICR_BEIE (1 << 10) /* enable bus error ints */ +-#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */ +-#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */ +-#define ICR_SADIE (1 << 13) /* slave address detected int enable */ +-#define ICR_UR (1 << 14) /* unit reset */ +-#define ICR_FM (1 << 15) /* fast mode */ +-#define ICR_HS (1 << 16) /* High Speed mode */ +-#define ICR_GPIOEN (1 << 19) /* enable GPIO mode for SCL in HS */ +- +-#define ISR_RWM (1 << 0) /* read/write mode */ +-#define ISR_ACKNAK (1 << 1) /* ack/nak status */ +-#define ISR_UB (1 << 2) /* unit busy */ +-#define ISR_IBB (1 << 3) /* bus busy */ +-#define ISR_SSD (1 << 4) /* slave stop detected */ +-#define ISR_ALD (1 << 5) /* arbitration loss detected */ +-#define ISR_ITE (1 << 6) /* tx buffer empty */ +-#define ISR_IRF (1 << 7) /* rx buffer full */ +-#define ISR_GCAD (1 << 8) /* general call address detected */ +-#define ISR_SAD (1 << 9) /* slave address detected */ +-#define ISR_BED (1 << 10) /* bus error no ACK/NAK */ +- +-/* bit field shift & mask */ +-#define ILCR_SLV_SHIFT 0 +-#define ILCR_SLV_MASK (0x1FF << ILCR_SLV_SHIFT) +-#define ILCR_FLV_SHIFT 9 +-#define ILCR_FLV_MASK (0x1FF << ILCR_FLV_SHIFT) +-#define ILCR_HLVL_SHIFT 18 +-#define ILCR_HLVL_MASK (0x1FF << ILCR_HLVL_SHIFT) +-#define ILCR_HLVH_SHIFT 27 +-#define ILCR_HLVH_MASK (0x1F << ILCR_HLVH_SHIFT) +- +-#define IWCR_CNT_SHIFT 0 +-#define IWCR_CNT_MASK (0x1F << IWCR_CNT_SHIFT) +-#define IWCR_HS_CNT1_SHIFT 5 +-#define IWCR_HS_CNT1_MASK (0x1F << IWCR_HS_CNT1_SHIFT) +-#define IWCR_HS_CNT2_SHIFT 10 +-#define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) +- + struct pxa_i2c { + spinlock_t lock; + wait_queue_head_t wait; +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch b/target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch new file mode 100644 index 0000000000..9d7c501640 --- /dev/null +++ b/target/linux/generic/backport-5.4/808-v5.8-i2c-pxa-add-and-use-definitions-for-IBMR-register.patch @@ -0,0 +1,71 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 06/17] i2c: pxa: add and use definitions for IBMR register +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Add definitions for the bits in the IBMR register, and use them in the +code. This improves readability. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 12 ++++++++---- + 1 file changed, 8 insertions(+), 4 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index ea96dfa6b9d5..b3286d7ab75d 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -34,6 +34,9 @@ + #include + + /* I2C register field definitions */ ++#define IBMR_SDAS (1 << 0) ++#define IBMR_SCLS (1 << 1) ++ + #define ICR_START (1 << 0) /* start bit */ + #define ICR_STOP (1 << 1) /* stop bit */ + #define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */ +@@ -335,7 +338,7 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c) + return; + } + +- while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) { ++ while ((i > 0) && (readl(_IBMR(i2c)) & IBMR_SDAS) == 0) { + unsigned long icr = readl(_ICR(i2c)); + + icr &= ~ICR_START; +@@ -390,7 +393,8 @@ static int i2c_pxa_wait_master(struct pxa_i2c *i2c) + * quick check of the i2c lines themselves to ensure they've + * gone high... + */ +- if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) { ++ if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && ++ readl(_IBMR(i2c)) == (IBMR_SCLS | IBMR_SDAS)) { + if (i2c_debug > 0) + dev_dbg(&i2c->adap.dev, "%s: done\n", __func__); + return 1; +@@ -575,7 +579,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) + timeout = 0x10000; + + while (1) { +- if ((readl(_IBMR(i2c)) & 2) == 2) ++ if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS) + break; + + timeout--; +@@ -638,7 +642,7 @@ static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr) + timeout = 0x10000; + + while (1) { +- if ((readl(_IBMR(i2c)) & 2) == 2) ++ if ((readl(_IBMR(i2c)) & IBMR_SCLS) == IBMR_SCLS) + break; + + timeout--; +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch b/target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch new file mode 100644 index 0000000000..2e98c7ba00 --- /dev/null +++ b/target/linux/generic/backport-5.4/809-v5.8-i2c-pxa-always-set-fm-and-hs-members-for-each-type.patch @@ -0,0 +1,71 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 07/17] i2c: pxa: always set fm and hs members for each type +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Always set the fm and hs members of struct pxa_reg_layout. These +members are already taking space, we don't need code as well. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 12 ++++++++++-- + 1 file changed, 10 insertions(+), 2 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index b3286d7ab75d..05dbe6bf4633 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -114,6 +114,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = { + .icr = 0x10, + .isr = 0x18, + .isar = 0x20, ++ .fm = ICR_FM, ++ .hs = ICR_HS, + }, + [REGS_PXA3XX] = { + .ibmr = 0x00, +@@ -121,6 +123,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = { + .icr = 0x08, + .isr = 0x0c, + .isar = 0x10, ++ .fm = ICR_FM, ++ .hs = ICR_HS, + }, + [REGS_CE4100] = { + .ibmr = 0x14, +@@ -128,6 +132,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = { + .icr = 0x00, + .isr = 0x04, + /* no isar register */ ++ .fm = ICR_FM, ++ .hs = ICR_HS, + }, + [REGS_PXA910] = { + .ibmr = 0x00, +@@ -137,6 +143,8 @@ static struct pxa_reg_layout pxa_reg_layout[] = { + .isar = 0x20, + .ilcr = 0x28, + .iwcr = 0x30, ++ .fm = ICR_FM, ++ .hs = ICR_HS, + }, + [REGS_A3700] = { + .ibmr = 0x00, +@@ -1235,8 +1243,8 @@ static int i2c_pxa_probe(struct platform_device *dev) + i2c->reg_idbr = i2c->reg_base + pxa_reg_layout[i2c_type].idbr; + i2c->reg_icr = i2c->reg_base + pxa_reg_layout[i2c_type].icr; + i2c->reg_isr = i2c->reg_base + pxa_reg_layout[i2c_type].isr; +- i2c->fm_mask = pxa_reg_layout[i2c_type].fm ? : ICR_FM; +- i2c->hs_mask = pxa_reg_layout[i2c_type].hs ? : ICR_HS; ++ i2c->fm_mask = pxa_reg_layout[i2c_type].fm; ++ i2c->hs_mask = pxa_reg_layout[i2c_type].hs; + + if (i2c_type != REGS_CE4100) + i2c->reg_isar = i2c->reg_base + pxa_reg_layout[i2c_type].isar; +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch b/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch new file mode 100644 index 0000000000..a7bbdd9546 --- /dev/null +++ b/target/linux/generic/backport-5.4/810-v5.8-i2c-pxa-move-private-definitions-to-i2c-pxa.c.patch @@ -0,0 +1,135 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 08/17] i2c: pxa: move private definitions to i2c-pxa.c +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Move driver-private definitions out of the i2c-pxa.h platform data +header file into the driver itself. Nothing outside of the driver +makes use of these constants. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 43 ++++++++++++++++++++++++ + include/linux/platform_data/i2c-pxa.h | 48 --------------------------- + 2 files changed, 43 insertions(+), 48 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 05dbe6bf4633..482768a9fdd2 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -86,6 +86,49 @@ + #define IWCR_HS_CNT2_SHIFT 10 + #define IWCR_HS_CNT2_MASK (0x1F << IWCR_HS_CNT2_SHIFT) + ++/* need a longer timeout if we're dealing with the fact we may well be ++ * looking at a multi-master environment ++ */ ++#define DEF_TIMEOUT 32 ++ ++#define BUS_ERROR (-EREMOTEIO) ++#define XFER_NAKED (-ECONNREFUSED) ++#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ ++ ++/* ICR initialize bit values ++ * ++ * 15 FM 0 (100 kHz operation) ++ * 14 UR 0 (No unit reset) ++ * 13 SADIE 0 (Disables the unit from interrupting on slave addresses ++ * matching its slave address) ++ * 12 ALDIE 0 (Disables the unit from interrupt when it loses arbitration ++ * in master mode) ++ * 11 SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) ++ * 10 BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) ++ * 9 IRFIE 1 (Enable interrupts from full buffer received) ++ * 8 ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) ++ * 7 GCD 1 (Disables i2c unit response to general call messages as a slave) ++ * 6 IUE 0 (Disable unit until we change settings) ++ * 5 SCLE 1 (Enables the i2c clock output for master mode (drives SCL) ++ * 4 MA 0 (Only send stop with the ICR stop bit) ++ * 3 TB 0 (We are not transmitting a byte initially) ++ * 2 ACKNAK 0 (Send an ACK after the unit receives a byte) ++ * 1 STOP 0 (Do not send a STOP) ++ * 0 START 0 (Do not send a START) ++ */ ++#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) ++ ++/* I2C status register init values ++ * ++ * 10 BED 1 (Clear bus error detected) ++ * 9 SAD 1 (Clear slave address detected) ++ * 7 IRF 1 (Clear IDBR Receive Full) ++ * 6 ITE 1 (Clear IDBR Transmit Empty) ++ * 5 ALD 1 (Clear Arbitration Loss Detected) ++ * 4 SSD 1 (Clear Slave Stop Detected) ++ */ ++#define I2C_ISR_INIT 0x7FF /* status register init */ ++ + struct pxa_reg_layout { + u32 ibmr; + u32 idbr; +diff --git a/include/linux/platform_data/i2c-pxa.h b/include/linux/platform_data/i2c-pxa.h +index cb290092599c..5c08a6ff3444 100644 +--- a/include/linux/platform_data/i2c-pxa.h ++++ b/include/linux/platform_data/i2c-pxa.h +@@ -7,54 +7,6 @@ + #ifndef _I2C_PXA_H_ + #define _I2C_PXA_H_ + +-#if 0 +-#define DEF_TIMEOUT 3 +-#else +-/* need a longer timeout if we're dealing with the fact we may well be +- * looking at a multi-master environment +-*/ +-#define DEF_TIMEOUT 32 +-#endif +- +-#define BUS_ERROR (-EREMOTEIO) +-#define XFER_NAKED (-ECONNREFUSED) +-#define I2C_RETRY (-2000) /* an error has occurred retry transmit */ +- +-/* ICR initialize bit values +-* +-* 15. FM 0 (100 Khz operation) +-* 14. UR 0 (No unit reset) +-* 13. SADIE 0 (Disables the unit from interrupting on slave addresses +-* matching its slave address) +-* 12. ALDIE 0 (Disables the unit from interrupt when it loses arbitration +-* in master mode) +-* 11. SSDIE 0 (Disables interrupts from a slave stop detected, in slave mode) +-* 10. BEIE 1 (Enable interrupts from detected bus errors, no ACK sent) +-* 9. IRFIE 1 (Enable interrupts from full buffer received) +-* 8. ITEIE 1 (Enables the I2C unit to interrupt when transmit buffer empty) +-* 7. GCD 1 (Disables i2c unit response to general call messages as a slave) +-* 6. IUE 0 (Disable unit until we change settings) +-* 5. SCLE 1 (Enables the i2c clock output for master mode (drives SCL) +-* 4. MA 0 (Only send stop with the ICR stop bit) +-* 3. TB 0 (We are not transmitting a byte initially) +-* 2. ACKNAK 0 (Send an ACK after the unit receives a byte) +-* 1. STOP 0 (Do not send a STOP) +-* 0. START 0 (Do not send a START) +-* +-*/ +-#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) +- +-/* I2C status register init values +- * +- * 10. BED 1 (Clear bus error detected) +- * 9. SAD 1 (Clear slave address detected) +- * 7. IRF 1 (Clear IDBR Receive Full) +- * 6. ITE 1 (Clear IDBR Transmit Empty) +- * 5. ALD 1 (Clear Arbitration Loss Detected) +- * 4. SSD 1 (Clear Slave Stop Detected) +- */ +-#define I2C_ISR_INIT 0x7FF /* status register init */ +- + struct i2c_slave_client; + + struct i2c_pxa_platform_data { +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch b/target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch new file mode 100644 index 0000000000..3f1b96a8d6 --- /dev/null +++ b/target/linux/generic/backport-5.4/811-v5.8-i2c-pxa-move-DT-IDs-along-side-platform-IDs.patch @@ -0,0 +1,55 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 09/17] i2c: pxa: move DT IDs along side platform IDs +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Move the ID tables into one place, near the device dependent data. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 482768a9fdd2..760a29fb6af5 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -200,6 +200,15 @@ static struct pxa_reg_layout pxa_reg_layout[] = { + }, + }; + ++static const struct of_device_id i2c_pxa_dt_ids[] = { ++ { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, ++ { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, ++ { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 }, ++ { .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); ++ + static const struct platform_device_id i2c_pxa_id_table[] = { + { "pxa2xx-i2c", REGS_PXA2XX }, + { "pxa3xx-pwri2c", REGS_PXA3XX }, +@@ -1184,15 +1193,6 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = { + .functionality = i2c_pxa_functionality, + }; + +-static const struct of_device_id i2c_pxa_dt_ids[] = { +- { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, +- { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, +- { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 }, +- { .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 }, +- {} +-}; +-MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); +- + static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) + { +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/812-v5.8-i2c-pxa-fix-i2c_pxa_scream_blue_murder-debug-output.patch b/target/linux/generic/backport-5.4/812-v5.8-i2c-pxa-fix-i2c_pxa_scream_blue_murder-debug-output.patch new file mode 100644 index 0000000000..6c912e6254 --- /dev/null +++ b/target/linux/generic/backport-5.4/812-v5.8-i2c-pxa-fix-i2c_pxa_scream_blue_murder-debug-output.patch @@ -0,0 +1,52 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 10/17] i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +The IRQ log output is supposed to appear on a single line. However, +commit 3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info +on error") resulted in it being printed one-entry-per-line, which is +excessively long. + +Fixing this is not a trivial matter; using pr_cont() doesn't work as +the previous dev_dbg() may not have been compiled in, or may be +dynamic. + +Since the rest of this function output is at error level, and is also +debug output, promote this to error level as well to avoid this +problem. + +Reduce the number of always zero prefix digits to save screen real- +estate. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 760a29fb6af5..f3a11050053c 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -364,11 +364,10 @@ static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) + dev_err(dev, "IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", + readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), + readl(_ISR(i2c))); +- dev_dbg(dev, "log: "); ++ dev_err(dev, "log:"); + for (i = 0; i < i2c->irqlogidx; i++) +- pr_debug("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); +- +- pr_debug("\n"); ++ pr_cont(" [%03x:%05x]", i2c->isrlog[i], i2c->icrlog[i]); ++ pr_cont("\n"); + } + + #else /* ifdef DEBUG */ +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/813-v5.8-i2c-pxa-clean-up-decode_bits.patch b/target/linux/generic/backport-5.4/813-v5.8-i2c-pxa-clean-up-decode_bits.patch new file mode 100644 index 0000000000..552630eaf7 --- /dev/null +++ b/target/linux/generic/backport-5.4/813-v5.8-i2c-pxa-clean-up-decode_bits.patch @@ -0,0 +1,58 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 11/17] i2c: pxa: clean up decode_bits() +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Clean up decode_bits() to use pr_cont(), and move the newline into the +function rather than at its two callsites. Avoid printing an +unnecessary space before the newline. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 7 +++---- + 1 file changed, 3 insertions(+), 4 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index f3a11050053c..b2c7765756e2 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -287,13 +287,14 @@ struct bits { + static inline void + decode_bits(const char *prefix, const struct bits *bits, int num, u32 val) + { +- printk("%s %08x: ", prefix, val); ++ printk("%s %08x:", prefix, val); + while (num--) { + const char *str = val & bits->mask ? bits->set : bits->unset; + if (str) +- printk("%s ", str); ++ pr_cont(" %s", str); + bits++; + } ++ pr_cont("\n"); + } + + static const struct bits isr_bits[] = { +@@ -313,7 +314,6 @@ static const struct bits isr_bits[] = { + static void decode_ISR(unsigned int val) + { + decode_bits(KERN_DEBUG "ISR", isr_bits, ARRAY_SIZE(isr_bits), val); +- printk("\n"); + } + + static const struct bits icr_bits[] = { +@@ -338,7 +338,6 @@ static const struct bits icr_bits[] = { + static void decode_ICR(unsigned int val) + { + decode_bits(KERN_DEBUG "ICR", icr_bits, ARRAY_SIZE(icr_bits), val); +- printk("\n"); + } + #endif + +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/814-v5.8-i2c-pxa-fix-i2c_pxa_wait_bus_not_busy-boundary-condi.patch b/target/linux/generic/backport-5.4/814-v5.8-i2c-pxa-fix-i2c_pxa_wait_bus_not_busy-boundary-condi.patch new file mode 100644 index 0000000000..d5aded5479 --- /dev/null +++ b/target/linux/generic/backport-5.4/814-v5.8-i2c-pxa-fix-i2c_pxa_wait_bus_not_busy-boundary-condi.patch @@ -0,0 +1,58 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Cc: linux-i2c@vger.kernel.org +Subject: [PATCH 12/17] i2c: pxa: fix i2c_pxa_wait_bus_not_busy() boundary + condition +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Fix i2c_pxa_wait_bus_not_busy()'s boundary conditions, so that a +coincidental success and timeout results in the function returning +success. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 17 ++++++++++++----- + 1 file changed, 12 insertions(+), 5 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index b2c7765756e2..19505ffbb8f1 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -417,19 +417,26 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c) + static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c) + { + int timeout = DEF_TIMEOUT; ++ u32 isr; + +- while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { +- if ((readl(_ISR(i2c)) & ISR_SAD) != 0) ++ while (1) { ++ isr = readl(_ISR(i2c)); ++ if (!(isr & (ISR_IBB | ISR_UB))) ++ return 0; ++ ++ if (isr & ISR_SAD) + timeout += 4; + ++ if (!timeout--) ++ break; ++ + msleep(2); + show_state(i2c); + } + +- if (timeout < 0) +- show_state(i2c); ++ show_state(i2c); + +- return timeout < 0 ? I2C_RETRY : 0; ++ return I2C_RETRY; + } + + static int i2c_pxa_wait_master(struct pxa_i2c *i2c) +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch b/target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch new file mode 100644 index 0000000000..f66759f48b --- /dev/null +++ b/target/linux/generic/backport-5.4/815-v5.8-i2c-pxa-consolidate-i2c_pxa_-xfer-implementations.patch @@ -0,0 +1,96 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 1/7] i2c: pxa: consolidate i2c_pxa_*xfer() implementations +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Most of i2c_pxa_pio_xfer() and i2c_pxa_xfer() are identical; the only +differences are that i2c_pxa_pio_xfer() may reset the bus, and they +use different underlying transfer functions. The retry loop is the +same. Consolidate these two functions. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 36 ++++++++++++++++-------------------- + 1 file changed, 16 insertions(+), 20 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index c1e50c0b9756..46f1cf97d955 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -1102,18 +1102,20 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) + return ret; + } + +-static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) ++static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c, ++ struct i2c_msg *msgs, int num, ++ int (*xfer)(struct pxa_i2c *, ++ struct i2c_msg *, int num)) + { +- struct pxa_i2c *i2c = adap->algo_data; + int ret, i; + +- for (i = adap->retries; i >= 0; i--) { +- ret = i2c_pxa_do_xfer(i2c, msgs, num); ++ for (i = i2c->adap.retries; i >= 0; i--) { ++ ret = xfer(i2c, msgs, num); + if (ret != I2C_RETRY) + goto out; + + if (i2c_debug) +- dev_dbg(&adap->dev, "Retrying transmission\n"); ++ dev_dbg(&i2c->adap.dev, "Retrying transmission\n"); + udelay(100); + } + i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); +@@ -1123,6 +1125,14 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num + return ret; + } + ++static int i2c_pxa_xfer(struct i2c_adapter *adap, ++ struct i2c_msg msgs[], int num) ++{ ++ struct pxa_i2c *i2c = adap->algo_data; ++ ++ return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_xfer); ++} ++ + static u32 i2c_pxa_functionality(struct i2c_adapter *adap) + { + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | +@@ -1210,7 +1220,6 @@ static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, + struct i2c_msg msgs[], int num) + { + struct pxa_i2c *i2c = adap->algo_data; +- int ret, i; + + /* If the I2C controller is disabled we need to reset it + (probably due to a suspend/resume destroying state). We do +@@ -1219,20 +1228,7 @@ static int i2c_pxa_pio_xfer(struct i2c_adapter *adap, + if (!(readl(_ICR(i2c)) & ICR_IUE)) + i2c_pxa_reset(i2c); + +- for (i = adap->retries; i >= 0; i--) { +- ret = i2c_pxa_do_pio_xfer(i2c, msgs, num); +- if (ret != I2C_RETRY) +- goto out; +- +- if (i2c_debug) +- dev_dbg(&adap->dev, "Retrying transmission\n"); +- udelay(100); +- } +- i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); +- ret = -EREMOTEIO; +- out: +- i2c_pxa_set_slave(i2c, ret); +- return ret; ++ return i2c_pxa_internal_xfer(i2c, msgs, num, i2c_pxa_do_pio_xfer); + } + + static const struct i2c_algorithm i2c_pxa_pio_algorithm = { +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch b/target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch new file mode 100644 index 0000000000..308dba0fb9 --- /dev/null +++ b/target/linux/generic/backport-5.4/816-v5.8-i2c-pxa-avoid-complaints-with-non-responsive-slaves.patch @@ -0,0 +1,72 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 2/7] i2c: pxa: avoid complaints with non-responsive slaves +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Running i2cdetect on a PXA I2C adapter is very noisy; it complains +whenever a slave fails to respond to the address cycle. Since it is +normal to probe for slaves in this way, we should not fill the kernel +log. This is especially true with SFP modules that take a while to +respond on the I2C bus, and probing via the I2C bus is the only way to +detect that they are ready. + +Fix this by changing the internal transfer return code from I2C_RETRY +to a new NO_SLAVE code (mapped to -ENXIO, as per the I2C documentation +for this condition, but we still return -EREMOTEIO to the I2C stack to +maintain long established driver behaviour.) + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 12 ++++++++---- + 1 file changed, 8 insertions(+), 4 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 46f1cf97d955..f20f8b905793 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -90,6 +90,7 @@ + */ + #define DEF_TIMEOUT 32 + ++#define NO_SLAVE (-ENXIO) + #define BUS_ERROR (-EREMOTEIO) + #define XFER_NAKED (-ECONNREFUSED) + #define I2C_RETRY (-2000) /* an error has occurred retry transmit */ +@@ -881,7 +882,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) + */ + if (isr & ISR_ACKNAK) { + if (i2c->msg_ptr == 0 && i2c->msg_idx == 0) +- ret = I2C_RETRY; ++ ret = NO_SLAVE; + else + ret = XFER_NAKED; + } +@@ -1109,16 +1110,19 @@ static int i2c_pxa_internal_xfer(struct pxa_i2c *i2c, + { + int ret, i; + +- for (i = i2c->adap.retries; i >= 0; i--) { ++ for (i = 0; ; ) { + ret = xfer(i2c, msgs, num); +- if (ret != I2C_RETRY) ++ if (ret != I2C_RETRY && ret != NO_SLAVE) + goto out; ++ if (++i >= i2c->adap.retries) ++ break; + + if (i2c_debug) + dev_dbg(&i2c->adap.dev, "Retrying transmission\n"); + udelay(100); + } +- i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); ++ if (ret != NO_SLAVE) ++ i2c_pxa_scream_blue_murder(i2c, "exhausted retries"); + ret = -EREMOTEIO; + out: + i2c_pxa_set_slave(i2c, ret); +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch b/target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch new file mode 100644 index 0000000000..39ca935ae9 --- /dev/null +++ b/target/linux/generic/backport-5.4/817-v5.8-i2c-pxa-ensure-timeout-messages-are-unique.patch @@ -0,0 +1,50 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 3/7] i2c: pxa: ensure timeout messages are unique +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Ensure that the various timeout messages can identify where in the code +they were produced from to aid debugging. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index f20f8b905793..0becab239476 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -1095,7 +1095,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) + ret = i2c->msg_idx; + + if (!timeout && i2c->msg_num) { +- i2c_pxa_scream_blue_murder(i2c, "timeout"); ++ i2c_pxa_scream_blue_murder(i2c, "timeout with active message"); + ret = I2C_RETRY; + } + +@@ -1169,7 +1169,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) + if (timeout < 0) { + show_state(i2c); + dev_err(&i2c->adap.dev, +- "i2c_pxa: timeout waiting for bus free\n"); ++ "i2c_pxa: timeout waiting for bus free (set_master)\n"); + return I2C_RETRY; + } + +@@ -1213,7 +1213,7 @@ static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c, + + out: + if (timeout == 0) { +- i2c_pxa_scream_blue_murder(i2c, "timeout"); ++ i2c_pxa_scream_blue_murder(i2c, "timeout (do_pio_xfer)"); + ret = I2C_RETRY; + } + +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch b/target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch new file mode 100644 index 0000000000..4676d7721f --- /dev/null +++ b/target/linux/generic/backport-5.4/818-v5.8-i2c-pxa-remove-some-unnecessary-debug.patch @@ -0,0 +1,39 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 4/7] i2c: pxa: remove some unnecessary debug +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Remove unnecessary show_state() in the loop inside +i2c_pxa_pio_set_master(), which can be unnecessarily verbose. + +Remove the i2c_pxa_scream_blue_murder() in i2c_pxa_pio_xfer(), which +will trigger if we are probing the I2C bus and a slave does not +respond; this is a normal event, and not something to report. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 4 +--- + 1 file changed, 1 insertion(+), 3 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 0becab239476..db739cce93ac 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -1161,10 +1161,8 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c) + /* + * Wait for the bus to become free. + */ +- while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) { ++ while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) + udelay(1000); +- show_state(i2c); +- } + + if (timeout < 0) { + show_state(i2c); +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/819-v5.8-i2c-pxa-clear-all-master-action-bits-in-i2c_pxa_stop.patch b/target/linux/generic/backport-5.4/819-v5.8-i2c-pxa-clear-all-master-action-bits-in-i2c_pxa_stop.patch new file mode 100644 index 0000000000..997670716f --- /dev/null +++ b/target/linux/generic/backport-5.4/819-v5.8-i2c-pxa-clear-all-master-action-bits-in-i2c_pxa_stop.patch @@ -0,0 +1,43 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 5/7] i2c: pxa: clear all master action bits in + i2c_pxa_stop_message() +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +If we timeout during a message transfer, the control register may +contain bits that cause an action to be set. Read-modify-writing the +register leaving these bits set may trigger the hardware to attempt +one of these actions unintentionally. + +Always clear these bits when cleaning up after a message or after +a timeout. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 6 ++---- + 1 file changed, 2 insertions(+), 4 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index db739cce93ac..a72d07bdb793 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -795,11 +795,9 @@ static inline void i2c_pxa_stop_message(struct pxa_i2c *i2c) + { + u32 icr; + +- /* +- * Clear the STOP and ACK flags +- */ ++ /* Clear the START, STOP, ACK, TB and MA flags */ + icr = readl(_ICR(i2c)); +- icr &= ~(ICR_STOP | ICR_ACKNAK); ++ icr &= ~(ICR_START | ICR_STOP | ICR_ACKNAK | ICR_TB | ICR_MA); + writel(icr, _ICR(i2c)); + } + +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/820-v5.8-i2c-pxa-use-master-abort-for-device-probes.patch b/target/linux/generic/backport-5.4/820-v5.8-i2c-pxa-use-master-abort-for-device-probes.patch new file mode 100644 index 0000000000..2fde9e7322 --- /dev/null +++ b/target/linux/generic/backport-5.4/820-v5.8-i2c-pxa-use-master-abort-for-device-probes.patch @@ -0,0 +1,40 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 6/7] i2c: pxa: use master-abort for device probes +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Use master-abort to send the stop condition after an address cycle +rather than resetting the controller. + +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 10 ++-------- + 1 file changed, 2 insertions(+), 8 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index a72d07bdb793..0e194d6cd1b5 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -940,14 +940,8 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) + icr &= ~ICR_ALDIE; + icr |= ICR_START | ICR_TB; + } else { +- if (i2c->msg->len == 0) { +- /* +- * Device probes have a message length of zero +- * and need the bus to be reset before it can +- * be used again. +- */ +- i2c_pxa_reset(i2c); +- } ++ if (i2c->msg->len == 0) ++ icr |= ICR_MA; + i2c_pxa_master_complete(i2c, 0); + } + +-- +2.20.1 + diff --git a/target/linux/generic/backport-5.4/821-v5.8-i2c-pxa-implement-generic-i2c-bus-recovery.patch b/target/linux/generic/backport-5.4/821-v5.8-i2c-pxa-implement-generic-i2c-bus-recovery.patch new file mode 100644 index 0000000000..745cb6567c --- /dev/null +++ b/target/linux/generic/backport-5.4/821-v5.8-i2c-pxa-implement-generic-i2c-bus-recovery.patch @@ -0,0 +1,290 @@ +From: Russell King +Bcc: linux@mail.armlinux.org.uk +Subject: [PATCH 7/7] i2c: pxa: implement generic i2c bus recovery +MIME-Version: 1.0 +Content-Disposition: inline +Content-Transfer-Encoding: 8bit +Content-Type: text/plain; charset="utf-8" + +Implement generic GPIO-based I2C bus recovery for the PXA I2C driver. + +Reviewed-by: Andrew Lunn +Signed-off-by: Russell King +--- + drivers/i2c/busses/i2c-pxa.c | 176 +++++++++++++++++++++++++++++++---- + 1 file changed, 159 insertions(+), 17 deletions(-) + +diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c +index 0e194d6cd1b5..a7885b8b5031 100644 +--- a/drivers/i2c/busses/i2c-pxa.c ++++ b/drivers/i2c/busses/i2c-pxa.c +@@ -20,6 +20,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -28,6 +29,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -260,6 +262,11 @@ struct pxa_i2c { + bool highmode_enter; + u32 fm_mask; + u32 hs_mask; ++ ++ struct i2c_bus_recovery_info recovery; ++ struct pinctrl *pinctrl; ++ struct pinctrl_state *pinctrl_default; ++ struct pinctrl_state *pinctrl_recovery; + }; + + #define _IBMR(i2c) ((i2c)->reg_ibmr) +@@ -559,13 +566,8 @@ static void i2c_pxa_set_slave(struct pxa_i2c *i2c, int errcode) + #define i2c_pxa_set_slave(i2c, err) do { } while (0) + #endif + +-static void i2c_pxa_reset(struct pxa_i2c *i2c) ++static void i2c_pxa_do_reset(struct pxa_i2c *i2c) + { +- pr_debug("Resetting I2C Controller Unit\n"); +- +- /* abort any transfer currently under way */ +- i2c_pxa_abort(i2c); +- + /* reset according to 9.8 */ + writel(ICR_UR, _ICR(i2c)); + writel(I2C_ISR_INIT, _ISR(i2c)); +@@ -584,12 +586,25 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c) + #endif + + i2c_pxa_set_slave(i2c, 0); ++} + ++static void i2c_pxa_enable(struct pxa_i2c *i2c) ++{ + /* enable unit */ + writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c)); + udelay(100); + } + ++static void i2c_pxa_reset(struct pxa_i2c *i2c) ++{ ++ pr_debug("Resetting I2C Controller Unit\n"); ++ ++ /* abort any transfer currently under way */ ++ i2c_pxa_abort(i2c); ++ i2c_pxa_do_reset(i2c); ++ i2c_pxa_enable(i2c); ++} ++ + + #ifdef CONFIG_I2C_PXA_SLAVE + /* +@@ -1043,6 +1058,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) + ret = i2c_pxa_wait_bus_not_busy(i2c); + if (ret) { + dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n"); ++ i2c_recover_bus(&i2c->adap); + goto out; + } + +@@ -1088,6 +1104,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num) + + if (!timeout && i2c->msg_num) { + i2c_pxa_scream_blue_murder(i2c, "timeout with active message"); ++ i2c_recover_bus(&i2c->adap); + ret = I2C_RETRY; + } + +@@ -1277,6 +1294,129 @@ static int i2c_pxa_probe_pdata(struct platform_device *pdev, + return 0; + } + ++static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap) ++{ ++ struct pxa_i2c *i2c = adap->algo_data; ++ u32 ibmr = readl(_IBMR(i2c)); ++ ++ /* ++ * Program the GPIOs to reflect the current I2C bus state while ++ * we transition to recovery; this avoids glitching the bus. ++ */ ++ gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS); ++ gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS); ++ ++ WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery)); ++} ++ ++static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap) ++{ ++ struct pxa_i2c *i2c = adap->algo_data; ++ u32 isr; ++ ++ /* ++ * The bus should now be free. Clear up the I2C controller before ++ * handing control of the bus back to avoid the bus changing state. ++ */ ++ isr = readl(_ISR(i2c)); ++ if (isr & (ISR_UB | ISR_IBB)) { ++ dev_dbg(&i2c->adap.dev, ++ "recovery: resetting controller, ISR=0x%08x\n", isr); ++ i2c_pxa_do_reset(i2c); ++ } ++ ++ WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default)); ++ ++ dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n", ++ readl(_IBMR(i2c)), readl(_ISR(i2c))); ++ ++ i2c_pxa_enable(i2c); ++} ++ ++static int i2c_pxa_init_recovery(struct pxa_i2c *i2c) ++{ ++ struct i2c_bus_recovery_info *bri = &i2c->recovery; ++ struct device *dev = i2c->adap.dev.parent; ++ ++ /* ++ * When slave mode is enabled, we are not the only master on the bus. ++ * Bus recovery can only be performed when we are the master, which ++ * we can't be certain of. Therefore, when slave mode is enabled, do ++ * not configure bus recovery. ++ */ ++ if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE)) ++ return 0; ++ ++ i2c->pinctrl = devm_pinctrl_get(dev); ++ if (IS_ERR(i2c->pinctrl)) ++ return PTR_ERR(i2c->pinctrl); ++ ++ if (!i2c->pinctrl) ++ return 0; ++ ++ i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl, ++ PINCTRL_STATE_DEFAULT); ++ i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery"); ++ ++ if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) { ++ dev_info(dev, "missing pinmux recovery information: %ld %ld\n", ++ PTR_ERR(i2c->pinctrl_default), ++ PTR_ERR(i2c->pinctrl_recovery)); ++ return 0; ++ } ++ ++ /* ++ * Claiming GPIOs can influence the pinmux state, and may glitch the ++ * I2C bus. Do this carefully. ++ */ ++ bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN); ++ if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER)) ++ return -EPROBE_DEFER; ++ if (IS_ERR(bri->scl_gpiod)) { ++ dev_info(dev, "missing scl gpio recovery information: %pe\n", ++ bri->scl_gpiod); ++ return 0; ++ } ++ ++ /* ++ * We have SCL. Pull SCL low and wait a bit so that SDA glitches ++ * have no effect. ++ */ ++ gpiod_direction_output(bri->scl_gpiod, 0); ++ udelay(10); ++ bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN); ++ ++ /* Wait a bit in case of a SDA glitch, and then release SCL. */ ++ udelay(10); ++ gpiod_direction_output(bri->scl_gpiod, 1); ++ ++ if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER)) ++ return -EPROBE_DEFER; ++ ++ if (IS_ERR(bri->sda_gpiod)) { ++ dev_info(dev, "missing sda gpio recovery information: %pe\n", ++ bri->sda_gpiod); ++ return 0; ++ } ++ ++ bri->prepare_recovery = i2c_pxa_prepare_recovery; ++ bri->unprepare_recovery = i2c_pxa_unprepare_recovery; ++ bri->recover_bus = i2c_generic_scl_recovery; ++ ++ i2c->adap.bus_recovery_info = bri; ++ ++ /* ++ * Claiming GPIOs can change the pinmux state, which confuses the ++ * pinctrl since pinctrl's idea of the current setting is unaffected ++ * by the pinmux change caused by claiming the GPIO. Work around that ++ * by switching pinctrl to the GPIO state here. We do it this way to ++ * avoid glitching the I2C bus. ++ */ ++ pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery); ++ ++ return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default); ++} ++ + static int i2c_pxa_probe(struct platform_device *dev) + { + struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev); +@@ -1289,6 +1429,16 @@ static int i2c_pxa_probe(struct platform_device *dev) + if (!i2c) + return -ENOMEM; + ++ /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ ++ i2c->adap.nr = dev->id; ++ i2c->adap.owner = THIS_MODULE; ++ i2c->adap.retries = 5; ++ i2c->adap.algo_data = i2c; ++ i2c->adap.dev.parent = &dev->dev; ++#ifdef CONFIG_OF ++ i2c->adap.dev.of_node = dev->dev.of_node; ++#endif ++ + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + i2c->reg_base = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(i2c->reg_base)) +@@ -1298,8 +1448,9 @@ static int i2c_pxa_probe(struct platform_device *dev) + if (irq < 0) + return irq; + +- /* Default adapter num to device id; i2c_pxa_probe_dt can override. */ +- i2c->adap.nr = dev->id; ++ ret = i2c_pxa_init_recovery(i2c); ++ if (ret) ++ return ret; + + ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); + if (ret > 0) +@@ -1307,9 +1458,6 @@ static int i2c_pxa_probe(struct platform_device *dev) + if (ret < 0) + return ret; + +- i2c->adap.owner = THIS_MODULE; +- i2c->adap.retries = 5; +- + spin_lock_init(&i2c->lock); + init_waitqueue_head(&i2c->wait); + +@@ -1375,12 +1523,6 @@ static int i2c_pxa_probe(struct platform_device *dev) + + i2c_pxa_reset(i2c); + +- i2c->adap.algo_data = i2c; +- i2c->adap.dev.parent = &dev->dev; +-#ifdef CONFIG_OF +- i2c->adap.dev.of_node = dev->dev.of_node; +-#endif +- + ret = i2c_add_numbered_adapter(&i2c->adap); + if (ret < 0) + goto ereqirq; +-- +2.20.1 +