From: John Crispin Date: Mon, 17 Aug 2015 06:00:11 +0000 (+0000) Subject: ramips: fix Omnima models, images and profiles names X-Git-Tag: reboot~2271 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=713c81e97b5b9557bcb6e6e9dc2308d20f8dbf23;p=openwrt%2Fstaging%2Fblogic.git ramips: fix Omnima models, images and profiles names Official names for supported Omnima products are (as on website): * Omnima HPM * Omnima MiniEMBWiFi * Omnima MiniEMBPlug This patch changes: * board names * dts filenames * profile names * image filenames * LED names for Omnima devices, for consistency. Signed-off-by: Piotr Dymacz SVN-Revision: 46627 --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 1ae4510b4c21..19e79a8875e6 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -166,14 +166,14 @@ case $board in set_wifi_led "m2m:blue:wifi" ucidef_set_led_netdev "eth" "Ethernet" "m2m:green:wan" "eth0" ;; - omni-emb-hpm) - ucidef_set_led_default "power" "POWER" "emb:orange:power" "1" - ucidef_set_led_netdev "eth" "ETH" "emb:green:eth" "eth0" - set_wifi_led "emb:green:wifi" - ;; - omni-plug) - set_wifi_led "miniplug:green:wlan" - set_usb_led "miniplug:green:mobile" + hpm) + ucidef_set_led_default "power" "POWER" "hpm:orange:power" "1" + ucidef_set_led_netdev "eth" "ETH" "hpm:green:eth" "eth0" + set_wifi_led "hpm:green:wifi" + ;; + miniembplug) + set_wifi_led "miniembplug:green:wlan" + set_usb_led "miniembplug:green:mobile" ;; px4885) set_wifi_led "7links:orange:wifi" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 8f6c813b2073..0fab232aa940 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -243,7 +243,7 @@ ramips_setup_interfaces() ;; d105 | \ na930 | \ - omni-emb-hpm|\ + hpm|\ wli-tx4-ag300n) ucidef_set_interface_lan "eth0" ;; diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 712e93cdbdfd..e7499a896794 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -119,9 +119,11 @@ get_status_led() { nw718) status_led="nw718:amber:cpu" ;; - omni-emb|\ - omni-emb-hpm) - status_led="emb:green:status" + miniembwifi) + status_led="miniembwifi:green:status" + ;; + hpm) + status_led="hpm:green:status" ;; pbr-m1) status_led="pbr-m1:green:sys" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 36ba3f2a8bf2..9b37ce685461 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -238,14 +238,14 @@ ramips_board_detect() { *"Intenso Memory 2 Move") name="m2m" ;; - *"Omnima EMB HPM") - name="omni-emb-hpm" + *"Omnima HPM") + name="hpm" ;; *"Omnima MiniEMBWiFi") - name="omni-emb" + name="miniembwifi" ;; - *"Omnima MiniPlug") - name="omni-plug" + *"Omnima MiniEMBPlug") + name="miniembplug" ;; *"Olimex RT5350F-OLinuXino") name="rt5350f-olinuxino" diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 5242e46bf969..7249005594f9 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -74,9 +74,9 @@ platform_check_image() { mzk-dp150n | \ nbg-419n | \ nw718 | \ - omni-emb | \ - omni-emb-hpm | \ - omni-plug | \ + miniembwifi | \ + hpm | \ + miniembplug | \ rt5350f-olinuxino | \ rt5350f-olinuxino-evb | \ psr-680w | \ diff --git a/target/linux/ramips/dts/HPM.dts b/target/linux/ramips/dts/HPM.dts new file mode 100644 index 000000000000..03bf71064ff2 --- /dev/null +++ b/target/linux/ramips/dts/HPM.dts @@ -0,0 +1,149 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "HPM", "ralink,rt3883-soc"; + model = "Omnima HPM"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + compatible = "macronix,mx25l12805d"; + spi-max-frequency = <25000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x0030000>; + label = "u-boot"; + read-only; + }; + + partition@30000 { + reg = <0x00030000 0x00010000>; + label = "config"; + read-only; + }; + + factory: partition@40000 { + reg = <0x00040000 0x00010000>; + label = "factory"; + read-only; + }; + + partition@50000 { + reg = <0x00050000 0x00fb0000>; + label = "firmware"; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + phy-handle = <&phy0>; + phy-mode = "rgmii"; + mtd-mac-address = <&factory 0x28>; + + mdio-bus { + status = "okay"; + + phy0: ethernet-phy@4 { + reg = <4>; + }; + }; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio0 14 0>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "hpm:orange:power"; + gpios = <&gpio0 7 1>; + }; + + status { + label = "hpm:green:status"; + gpios = <&gpio0 21 1>; + }; + + eth { + label = "hpm:green:eth"; + gpios = <&gpio0 20 1>; + }; + + eth2 { + label = "hpm:red:eth"; + gpios = <&gpio0 18 1>; + }; + + wifi { + label = "hpm:green:wifi"; + gpios = <&gpio0 17 1>; + }; + + wifi2 { + label = "hpm:red:wifi"; + gpios = <&gpio0 19 1>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + /* gpio 12 and 13 handle the OC input */ + + usb0 { + gpio-export,name = "usb0"; + gpio-export,output = <1>; + gpios = <&gpio0 2 0>; + }; + + usb1 { + gpio-export,name = "usb1"; + gpio-export,output = <1>; + gpios = <&gpio0 1 0>; + }; + }; +}; diff --git a/target/linux/ramips/dts/MINIEMBPLUG.dts b/target/linux/ramips/dts/MINIEMBPLUG.dts new file mode 100644 index 000000000000..c94c3aa6cdc3 --- /dev/null +++ b/target/linux/ramips/dts/MINIEMBPLUG.dts @@ -0,0 +1,120 @@ +/dts-v1/; + +/include/ "rt5350.dtsi" + +/ { + compatible = "MINIEMBPLUG", "ralink,rt5350-soc"; + model = "Omnima MiniEMBPlug"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wlan { + label = "miniembplug:red:wlan"; + gpios = <&gpio0 9 0>; + }; + + mobile { + label = "miniembplug:green:mobile"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x211>; + }; + + mode-one { + label = "mode1"; + gpios = <&gpio0 11 1>; + linux,code = <0x211>; + }; + + mode-two { + label = "mode2"; + gpios = <&gpio0 12 1>; + linux,code = <0x211>; + }; + }; + + palmbus@10000000 { + gpio0: gpio@600 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l6405d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l6405d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/MINIEMBWIFI.dts b/target/linux/ramips/dts/MINIEMBWIFI.dts new file mode 100644 index 000000000000..b026f0c75f3c --- /dev/null +++ b/target/linux/ramips/dts/MINIEMBWIFI.dts @@ -0,0 +1,92 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "MINIEMBWIFI", "ralink,rt3052-soc"; + model = "Omnima MiniEMBWiFi"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + status { + label = "miniembwifi:green:status"; + gpios = <&gpio0 9 1>; + }; + + wlan { + label = "miniembwifi:green:wlan"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 12 1>; + linux,code = <0x198>; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x28>; + }; + + esw@10110000 { + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts deleted file mode 100644 index 9540f4fbddd4..000000000000 --- a/target/linux/ramips/dts/OMNI-EMB-HPM.dts +++ /dev/null @@ -1,149 +0,0 @@ -/dts-v1/; - -/include/ "rt3883.dtsi" - -/ { - compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc"; - model = "Omnima EMB HPM"; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - palmbus@10000000 { - spi@b00 { - status = "okay"; - - m25p80@0 { - compatible = "macronix,mx25l12805d"; - spi-max-frequency = <25000000>; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x0030000>; - label = "u-boot"; - read-only; - }; - - partition@30000 { - reg = <0x00030000 0x00010000>; - label = "config"; - read-only; - }; - - factory: partition@40000 { - reg = <0x00040000 0x00010000>; - label = "factory"; - read-only; - }; - - partition@50000 { - reg = <0x00050000 0x00fb0000>; - label = "firmware"; - }; - }; - }; - }; - - pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "jtag", "uartf"; - ralink,function = "gpio"; - }; - }; - }; - - ethernet@10100000 { - phy-handle = <&phy0>; - phy-mode = "rgmii"; - mtd-mac-address = <&factory 0x28>; - - mdio-bus { - status = "okay"; - - phy0: ethernet-phy@4 { - reg = <4>; - }; - }; - }; - - wmac@10180000 { - ralink,mtd-eeprom = <&factory 0>; - }; - - ehci@101c0000 { - status = "okay"; - }; - - ohci@101c1000 { - status = "okay"; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio0 14 0>; - linux,code = <0x198>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power { - label = "emb:orange:power"; - gpios = <&gpio0 7 1>; - }; - - status { - label = "emb:green:status"; - gpios = <&gpio0 21 1>; - }; - - eth { - label = "emb:green:eth"; - gpios = <&gpio0 20 1>; - }; - - eth2 { - label = "emb:red:eth"; - gpios = <&gpio0 18 1>; - }; - - wifi { - label = "emb:green:wifi"; - gpios = <&gpio0 17 1>; - }; - - wifi2 { - label = "emb:red:wifi"; - gpios = <&gpio0 19 1>; - }; - }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - /* gpio 12 and 13 handle the OC input */ - - usb0 { - gpio-export,name = "usb0"; - gpio-export,output = <1>; - gpios = <&gpio0 2 0>; - }; - - usb1 { - gpio-export,name = "usb1"; - gpio-export,output = <1>; - gpios = <&gpio0 1 0>; - }; - }; -}; diff --git a/target/linux/ramips/dts/OMNI-EMB.dts b/target/linux/ramips/dts/OMNI-EMB.dts deleted file mode 100644 index aa3ddc42a43d..000000000000 --- a/target/linux/ramips/dts/OMNI-EMB.dts +++ /dev/null @@ -1,92 +0,0 @@ -/dts-v1/; - -/include/ "rt3050.dtsi" - -/ { - compatible = "OMNI-EMB", "ralink,rt3052-soc"; - model = "Omnima MiniEMBWiFi"; - - pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; - ralink,function = "gpio"; - }; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - status { - label = "emb:green:status"; - gpios = <&gpio0 9 1>; - }; - - wlan { - label = "emb:green:wlan"; - gpios = <&gpio0 14 1>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 12 1>; - linux,code = <0x198>; - }; - }; - - cfi@1f000000 { - compatible = "cfi-flash"; - reg = <0x1f000000 0x800000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - - ethernet@10100000 { - mtd-mac-address = <&factory 0x28>; - }; - - esw@10110000 { - ralink,portmap = <0x2f>; - }; - - wmac@10180000 { - ralink,mtd-eeprom = <&factory 0>; - }; - - otg@101c0000 { - status = "okay"; - }; -}; diff --git a/target/linux/ramips/dts/OMNI-PLUG.dts b/target/linux/ramips/dts/OMNI-PLUG.dts deleted file mode 100644 index 25f5bca8e3e4..000000000000 --- a/target/linux/ramips/dts/OMNI-PLUG.dts +++ /dev/null @@ -1,120 +0,0 @@ -/dts-v1/; - -/include/ "rt5350.dtsi" - -/ { - compatible = "OMNI-PLUG", "ralink,rt5350-soc"; - model = "Omnima MiniPlug"; - - pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "i2c", "jtag", "uartf"; - ralink,function = "gpio"; - }; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - wlan { - label = "miniplug:red:wlan"; - gpios = <&gpio0 9 0>; - }; - - mobile { - label = "miniplug:green:mobile"; - gpios = <&gpio0 13 1>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - wps { - label = "wps"; - gpios = <&gpio0 0 1>; - linux,code = <0x211>; - }; - - reset { - label = "reset"; - gpios = <&gpio0 10 1>; - linux,code = <0x211>; - }; - - mode-one { - label = "mode1"; - gpios = <&gpio0 11 1>; - linux,code = <0x211>; - }; - - mode-two { - label = "mode2"; - gpios = <&gpio0 12 1>; - linux,code = <0x211>; - }; - }; - - palmbus@10000000 { - gpio0: gpio@600 { - status = "okay"; - }; - - spi@b00 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l6405d"; - reg = <0 0>; - linux,modalias = "m25p80", "mx25l6405d"; - spi-max-frequency = <10000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0x7b0000>; - }; - }; - }; - }; - - ethernet@10100000 { - mtd-mac-address = <&factory 0x4>; - }; - - esw@10110000 { - ralink,portmap = <0x2f>; - }; - - wmac@10180000 { - ralink,mtd-eeprom = <&factory 0>; - }; - - otg@101c0000 { - status = "okay"; - }; -}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index ae89d6ccabcf..f3f40eb790ab 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -574,9 +574,9 @@ Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw71 Image/Build/Profile/M2M=$(call BuildFirmware/Default8M/$(1),$(1),m2m,M2M,Linux Kernel Image) -Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB) +Image/Build/Profile/MINIEMBPLUG=$(call BuildFirmware/Default8M/$(1),$(1),miniembplug,MINIEMBPLUG) -Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG) +Image/Build/Profile/MINIEMBWIFI=$(call BuildFirmware/Default8M/$(1),$(1),miniembwifi,MINIEMBWIFI) Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W) @@ -742,8 +742,8 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/NBG-419N,$(1)) $(call Image/Build/Profile/NCS601W,$(1)) $(call Image/Build/Profile/NW718,$(1)) - $(call Image/Build/Profile/OMNI-EMB,$(1)) - $(call Image/Build/Profile/OMNI-PLUG,$(1)) + $(call Image/Build/Profile/MINIEMBWIFI,$(1)) + $(call Image/Build/Profile/MINIEMBPLUG,$(1)) $(call Image/Build/Profile/PSR-680W,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) $(call Image/Build/Profile/PX4885,$(1)) @@ -815,8 +815,8 @@ Image/Build/Profile/CYSWR1100=$(call BuildFirmware/Seama/$(1),$(1),cy-swr1100,CY Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645,$(ralink_default_fw_size_8M)) -omniembhpm_mtd_size=16449536 -Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size)) +hpm_mtd_size=16449536 +Image/Build/Profile/HPM=$(call BuildFirmware/CustomFlash/$(1),$(1),hpm,HPM,$(hpm_mtd_size)) define BuildFirmware/RTN56U/squashfs $(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RT-N56U) @@ -838,7 +838,7 @@ ifeq ($(SUBTARGET),rt3883) define Image/Build/Profile/Default $(call Image/Build/Profile/CYSWR1100,$(1)) $(call Image/Build/Profile/DIR645,$(1)) - $(call Image/Build/Profile/OMNIEMBHPM,$(1)) + $(call Image/Build/Profile/HPM,$(1)) $(call Image/Build/Profile/RTN56U,$(1)) $(call Image/Build/Profile/BR6475ND,$(1)) $(call Image/Build/Profile/TEW691GR,$(1)) diff --git a/target/linux/ramips/rt3883/profiles/omnima.mk b/target/linux/ramips/rt3883/profiles/omnima.mk index 2f3171527726..ce25999b52d2 100644 --- a/target/linux/ramips/rt3883/profiles/omnima.mk +++ b/target/linux/ramips/rt3883/profiles/omnima.mk @@ -5,12 +5,12 @@ # See /LICENSE for more information. # -define Profile/OMNIEMBHPM - NAME:=Omnima EMB-HPM board +define Profile/HPM + NAME:=Omnima HPM PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 endef -define Profile/OMNIEMBHPM/Description - Package set compatible with the Omnima EMB-HPM board. +define Profile/HPM/Description + Package set compatible with the Omnima HPM board. endef -$(eval $(call Profile,OMNIEMBHPM)) +$(eval $(call Profile,HPM))