From: Peter Wu Date: Fri, 14 Feb 2014 18:03:45 +0000 (+0100) Subject: rtlwifi: properly apply filter flags X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=711f145ad0e93a914644d3e7998c28267bd3c136;p=openwrt%2Fstaging%2Fblogic.git rtlwifi: properly apply filter flags commit 0baa0fd76f3f5a134461d6cf30294f6bb1bb824c ("rtlwifi: Convert core routines for addition of rtl8192se and rtl8192de") removed setting HW_VAR_RCR, HW_VAR_MGT_FILTER and HW_VAR_CTRL_FILTER. The last two are probably done because some hardware does not support them. The first is probably a mistake. This patch adds the missing set_hw_reg call. For PCI support, rx_conf is not touched directly. Instead, get_hw_reg is used to abstract between receive_config (for PCI) and rx_conf (for USB). This was tested on a 10ec:8176 Realtek RTL8188CE (according to the label on the mini-PCIe card). Before this patch, `iw wlan0 set monitor otherbss` did not capture frames from other BSS's. After this patch, it does print packets. Tested-by: Peter Wu Signed-off-by: Peter Wu Acked-by: Larry Finger Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index 2d337a0c3df0..6df4df090b73 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -475,20 +475,40 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u32 rx_conf; *new_flags &= RTL_SUPPORTED_FILTERS; if (!changed_flags) return; + /* if ssid not set to hw don't check bssid + * here just used for linked scanning, & linked + * and nolink check bssid is set in set network_type */ + if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) && + (mac->link_state >= MAC80211_LINKED)) { + if (mac->opmode != NL80211_IFTYPE_AP && + mac->opmode != NL80211_IFTYPE_MESH_POINT) { + if (*new_flags & FIF_BCN_PRBRESP_PROMISC) { + rtlpriv->cfg->ops->set_chk_bssid(hw, false); + } else { + rtlpriv->cfg->ops->set_chk_bssid(hw, true); + } + } + } + + /* must be called after set_chk_bssid since that function modifies the + * RCR register too. */ + rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *)(&rx_conf)); + /*TODO: we disable broadcase now, so enable here */ if (changed_flags & FIF_ALLMULTI) { if (*new_flags & FIF_ALLMULTI) { - mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] | + rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] | rtlpriv->cfg->maps[MAC_RCR_AB]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Enable receive multicast frame\n"); } else { - mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] | + rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] | rtlpriv->cfg->maps[MAC_RCR_AB]); RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Disable receive multicast frame\n"); @@ -497,39 +517,25 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, if (changed_flags & FIF_FCSFAIL) { if (*new_flags & FIF_FCSFAIL) { - mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32]; + rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Enable receive FCS error frame\n"); } else { - mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32]; + rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Disable receive FCS error frame\n"); } } - /* if ssid not set to hw don't check bssid - * here just used for linked scanning, & linked - * and nolink check bssid is set in set network_type */ - if ((changed_flags & FIF_BCN_PRBRESP_PROMISC) && - (mac->link_state >= MAC80211_LINKED)) { - if (mac->opmode != NL80211_IFTYPE_AP && - mac->opmode != NL80211_IFTYPE_MESH_POINT) { - if (*new_flags & FIF_BCN_PRBRESP_PROMISC) { - rtlpriv->cfg->ops->set_chk_bssid(hw, false); - } else { - rtlpriv->cfg->ops->set_chk_bssid(hw, true); - } - } - } if (changed_flags & FIF_CONTROL) { if (*new_flags & FIF_CONTROL) { - mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF]; + rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Enable receive control frame\n"); } else { - mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF]; + rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Disable receive control frame\n"); } @@ -537,15 +543,17 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, if (changed_flags & FIF_OTHER_BSS) { if (*new_flags & FIF_OTHER_BSS) { - mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP]; + rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Enable receive other BSS's frame\n"); } else { - mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP]; + rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP]; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "Disable receive other BSS's frame\n"); } } + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(&rx_conf)); } static int rtl_op_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,