From: Lorenzo Santina Date: Mon, 25 Sep 2017 18:10:57 +0000 (+0200) Subject: hostapd: update hostapd mini config X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=70ade536929eaf1d87db07788ad2ce4f7771401e;p=openwrt%2Fstaging%2Fthess.git hostapd: update hostapd mini config Update the config file to the latest version. Enabled flags are the same as before. Signed-off-by: Lorenzo Santina [add punctuation to commit msg] Signed-off-by: Stijn Tintel --- diff --git a/package/network/services/hostapd/files/hostapd-mini.config b/package/network/services/hostapd/files/hostapd-mini.config index 2bd7d239c5..661983a94b 100644 --- a/package/network/services/hostapd/files/hostapd-mini.config +++ b/package/network/services/hostapd/files/hostapd-mini.config @@ -15,28 +15,37 @@ # Driver interface for wired authenticator CONFIG_DRIVER_WIRED=y -# Driver interface for Prism54 driver -#CONFIG_DRIVER_PRISM54=y - # Driver interface for drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y -# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be -# shipped with your distribution yet. If that is the case, you need to build -# newer libnl version and point the hostapd build to use it. -#LIBNL=/usr/src/libnl -#CFLAGS += -I$(LIBNL)/include -#LIBS += -L$(LIBNL)/lib + +# QCA vendor extensions to nl80211 +#CONFIG_DRIVER_NL80211_QCA=y + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$ +#LIBS += -L$ + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +#CONFIG_LIBNL32=y + # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include #LIBS += -L/usr/local/lib +#LIBS_p += -L/usr/local/lib +#LIBS_c += -L/usr/local/lib # Driver interface for no driver (e.g., RADIUS server only) #CONFIG_DRIVER_NONE=y # IEEE 802.11F/IAPP -# CONFIG_IAPP=y +#CONFIG_IAPP=y # WPA2/IEEE 802.11i RSN pre-authentication CONFIG_RSN_PREAUTH=y @@ -45,14 +54,15 @@ CONFIG_RSN_PREAUTH=y CONFIG_PEERKEY=y # IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. # Driver support is also needed for IEEE 802.11w. #CONFIG_IEEE80211W=y # Integrated EAP server #CONFIG_EAP=y +# EAP Re-authentication Protocol (ERP) in integrated EAP server +#CONFIG_ERP=y + # EAP-MD5 for the integrated EAP server #CONFIG_EAP_MD5=y @@ -87,6 +97,9 @@ CONFIG_PEERKEY=y # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) #CONFIG_EAP_PSK=y +# EAP-pwd for the integrated EAP server (secure authentication with a password) +#CONFIG_EAP_PWD=y + # EAP-SAKE for the integrated EAP server #CONFIG_EAP_SAKE=y @@ -96,16 +109,17 @@ CONFIG_PEERKEY=y #CONFIG_EAP_GPSK_SHA256=y # EAP-FAST for the integrated EAP server -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) -# to add the needed functions. +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. #CONFIG_EAP_FAST=y # Wi-Fi Protected Setup (WPS) #CONFIG_WPS=y # Enable UPnP support for external WPS Registrars #CONFIG_WPS_UPNP=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y # EAP-IKEv2 #CONFIG_EAP_IKEV2=y @@ -113,6 +127,9 @@ CONFIG_PEERKEY=y # Trusted Network Connect (EAP-TNC) #CONFIG_EAP_TNC=y +# EAP-EKE for the integrated EAP server +#CONFIG_EAP_EKE=y + # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) #CONFIG_PKCS12=y @@ -128,23 +145,43 @@ CONFIG_PEERKEY=y #CONFIG_IEEE80211R=y # Use the hostapd's IEEE 802.11 authentication (ACL), but without -# the IEEE 802.11 Management capability (e.g. FreeBSD/net80211) +# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211) #CONFIG_DRIVER_RADIUS_ACL=y # IEEE 802.11n (High Throughput) support CONFIG_IEEE80211N=y +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + # IEEE 802.11ac (Very High Throughput) support CONFIG_IEEE80211AC=y +# IEEE 802.11ax HE support +# Note: This is experimental and work in progress. The definitions are still +# subject to change and this should not be expected to interoperate with the +# final IEEE 802.11ax version. +#CONFIG_IEEE80211AX=y + # Remove debugging code that is printing out debug messages to stdout. # This can be used to reduce the size of the hostapd considerably if debugging # code is not needed. #CONFIG_NO_STDOUT_DEBUG=y +# Add support for writing debug log to a file: -f /tmp/hostapd.log +# Disabled by default. +#CONFIG_DEBUG_FILE=y + # Send debug messages to syslog instead of stdout CONFIG_DEBUG_SYSLOG=y +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + # Remove support for RADIUS accounting CONFIG_NO_ACCOUNTING=y @@ -154,9 +191,190 @@ CONFIG_NO_RADIUS=y # Remove support for VLANs #CONFIG_NO_VLAN=y -CONFIG_TLS=internal +# Enable support for fully dynamic VLANs. This enables hostapd to +# automatically create bridge and VLAN interfaces if necessary. +#CONFIG_FULL_DYNAMIC_VLAN=y -CONFIG_NO_RANDOM_POOL=y +# Use netlink-based kernel API for VLAN operations instead of ioctl() +# Note: This requires libnl 3.1 or newer. +#CONFIG_VLAN_NETLINK=y + +# Remove support for dumping internal state through control interface commands +# This can be used to reduce binary size at the cost of disabling a debugging +# option. CONFIG_NO_DUMP_STATE=y +# Enable tracing code for developer debugging +# This tracks use of memory allocations and other registrations and reports +# incorrect use with a backtrace of call (or allocation) location. +#CONFIG_WPA_TRACE=y +# For BSD, comment out these. +#LIBS += -lexecinfo +#LIBS_p += -lexecinfo +#LIBS_c += -lexecinfo + +# Use libbfd to get more details for developer debugging +# This enables use of libbfd to get more detailed symbols for the backtraces +# generated by CONFIG_WPA_TRACE=y. +#CONFIG_WPA_TRACE_BFD=y +# For BSD, comment out these. +#LIBS += -lbfd -liberty -lz +#LIBS_p += -lbfd -liberty -lz +#LIBS_c += -lbfd -liberty -lz + +# hostapd depends on strong random number generation being available from the +# operating system. os_get_random() function is used to fetch random data when +# needed, e.g., for key generation. On Linux and BSD systems, this works by +# reading /dev/urandom. It should be noted that the OS entropy pool needs to be +# properly initialized before hostapd is started. This is important especially +# on embedded devices that do not have a hardware random number generator and +# may by default start up with minimal entropy available for random number +# generation. +# +# As a safety net, hostapd is by default trying to internally collect +# additional entropy for generating random data to mix in with the data +# fetched from the OS. This by itself is not considered to be very strong, but +# it may help in cases where the system pool is not initialized properly. +# However, it is very strongly recommended that the system pool is initialized +# with enough entropy either by using hardware assisted random number +# generator or by storing state over device reboots. +# +# hostapd can be configured to maintain its own entropy store over restarts to +# enhance random number generation. This is not perfect, but it is much more +# secure than using the same sequence of random numbers after every reboot. +# This can be enabled with -e command line option. The specified +# file needs to be readable and writable by hostapd. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal hostapd random pool can be disabled. +# This will save some in binary size and CPU use. However, this should only be +# considered for builds that are known to be used on devices that meet the +# requirements described above. +CONFIG_NO_RANDOM_POOL=y + +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Should we use kqueue instead of select? Select is used by default. +#CONFIG_ELOOP_KQUEUE=y + +# Select TLS implementation +# openssl = OpenSSL (default) +# gnutls = GnuTLS +# internal = Internal TLSv1 implementation (experimental) +# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental) +# none = Empty template +CONFIG_TLS=internal + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. +#CONFIG_TLSV12=y + +# Select which ciphers to use by default with OpenSSL if the user does not +# specify them. +#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW" + +# If CONFIG_TLS=internal is used, additional library and include paths are +# needed for LibTomMath. Alternatively, an integrated, minimal version of +# LibTomMath can be used. See beginning of libtommath.c for details on benefits +# and drawbacks of this option. +#CONFIG_INTERNAL_LIBTOMMATH=y +#ifndef CONFIG_INTERNAL_LIBTOMMATH +#LTM_PATH=/usr/src/libtommath-0.39 +#CFLAGS += -I$(LTM_PATH) +#LIBS += -L$(LTM_PATH) +#LIBS_p += -L$(LTM_PATH) +#endif +# At the cost of about 4 kB of additional binary size, the internal LibTomMath +# can be configured to include faster routines for exptmod, sqr, and div to +# speed up DH and RSA calculation considerably +#CONFIG_INTERNAL_LIBTOMMATH_FAST=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks. +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file +#CONFIG_SQLITE=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# Testing options +# This can be used to enable some testing options (see also the example +# configuration file) that are really useful only for testing clients that +# connect to this hostapd. These options allow, for example, to drop a +# certain percentage of probe requests or auth/(re)assoc frames. +# +#CONFIG_TESTING_OPTIONS=y + +# Automatic Channel Selection +# This will allow hostapd to pick the channel automatically when channel is set +# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in +# similar way. +# +# Automatic selection is currently only done through initialization, later on +# we hope to do background checks to keep us moving to more ideal channels as +# time goes by. ACS is currently only supported through the nl80211 driver and +# your driver must have survey dump capability that is filled by the driver +# during scanning. +# +# You can customize the ACS survey algorithm with the hostapd.conf variable +# acs_num_scans. +# +# Supported ACS drivers: +# * ath9k +# * ath5k +# * ath10k +# +# For more details refer to: +# http://wireless.kernel.org/en/users/Documentation/acs +# +#CONFIG_ACS=y + +# Multiband Operation support +# These extentions facilitate efficient use of multiple frequency bands +# available to the AP and the devices that may associate with it. +#CONFIG_MBO=y + +# Client Taxonomy +# Has the AP retain the Probe Request and (Re)Association Request frames from +# a client, from which a signature can be produced which can identify the model +# of client device like "Nexus 6P" or "iPhone 5s". +#CONFIG_TAXONOMY=y + +# Fast Initial Link Setup (FILS) (IEEE 802.11ai) +# Note: This is an experimental and not yet complete implementation. This +# should not be enabled for production use. +#CONFIG_FILS=y +# FILS shared key authentication with PFS +#CONFIG_FILS_SK_PFS=y + +# Include internal line edit mode in hostapd_cli. This can be used to provide +# limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + +# Opportunistic Wireless Encryption (OWE) +# Experimental implementation of draft-harkins-owe-07.txt +#CONFIG_OWE=y + +# uBus IPC/RPC System +# Services can connect to the bus and provide methods +# that can be called by other services or clients. CONFIG_UBUS=y