From: James Hogan Date: Thu, 16 Jan 2014 22:56:22 +0000 (-0300) Subject: [media] media: rc: only turn on LED if keypress generated X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=70a2f9120ffdb9bf9732c55c3350cb002a78841d;p=openwrt%2Fstaging%2Fblogic.git [media] media: rc: only turn on LED if keypress generated Since v3.12, specifically 153a60bb0fac ([media] rc: add feedback led trigger for rc keypresses), an LED trigger is activated on IR keydown whether or not a keypress is generated (i.e. even if there's no matching keycode). However the repeat and keyup logic isn't used unless there is a keypress, which results in non-keypress keydown events turning on the LED and not turning it off again. On the assumption that the intent was for the LED only to light up on valid key presses (you probably don't want it lighting up for the wrong remote control for example), move the led_trigger_event() call inside the keycode check. Signed-off-by: James Hogan Acked-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index 399eef4e966a..b75b63b1f492 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -653,9 +653,10 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode, "key 0x%04x, scancode 0x%04x\n", dev->input_name, keycode, scancode); input_report_key(dev->input_dev, keycode, 1); + + led_trigger_event(led_feedback, LED_FULL); } - led_trigger_event(led_feedback, LED_FULL); input_sync(dev->input_dev); }