From: Lech Perczak <lech.perczak@gmail.com>
Date: Sat, 20 Jun 2020 16:16:11 +0000 (+0200)
Subject: ath79: fix input type for TP-Link TL-WR902AC v1 mode switch
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=708c6772f629a857a7d13a0ca65d6093746da8c3;p=openwrt%2Fstaging%2Fansuel.git

ath79: fix input type for TP-Link TL-WR902AC v1 mode switch

Inputs assigned to "mode select" switch on the side of the device
were missing linux,input-type property.
This would cause them do incorrectly generate EV_KEY events.
Fix this by setting the linux,input-type = <EV_SW> property on them.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
---

diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts b/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
index 9eca13d82b..4f5a29cfa0 100644
--- a/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts
@@ -77,12 +77,14 @@
 
 		sw1 {
 			label = "Mode switch 1";
+			linux,input-type = <EV_SW>;
 			linux,code = <BTN_0>;
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 		};
 
 		sw2 {
 			label = "Mode switch 2";
+			linux,input-type = <EV_SW>;
 			linux,code = <BTN_1>;
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 		};