From: Imre Kaloz Date: Fri, 28 Sep 2012 17:31:22 +0000 (+0000) Subject: USB iso mode fixes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=70729bb4a5fed5ac3e5b0fd60051d644560b843f;p=openwrt%2Fstaging%2Fwigyori.git USB iso mode fixes Resolves an issue where isochronouse USB would cause the driver to hang as well as scheduling issues. Signed-off-by: Tim Harvey SVN-Revision: 33579 --- diff --git a/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch b/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch index 8439d0ec70..f0510fae2c 100644 --- a/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch +++ b/target/linux/cns3xxx/patches-3.3/200-dwc_otg.patch @@ -7887,7 +7887,7 @@ +#endif --- /dev/null +++ b/drivers/usb/dwc/otg_hcd.c -@@ -0,0 +1,2735 @@ +@@ -0,0 +1,2752 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ + * $Revision: #75 $ @@ -8056,7 +8056,9 @@ + dwc_otg_qh_t *qh; + struct list_head *qtd_item; + dwc_otg_qtd_t *qtd; ++ unsigned long flags; + ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags); + list_for_each(qh_item, qh_list) { + qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); + for (qtd_item = qh->qtd_list.next; @@ -8070,6 +8072,7 @@ + dwc_otg_hcd_qtd_remove_and_free(hcd, qtd); + } + } ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); +} + +/** @@ -8313,10 +8316,14 @@ + hcd->regs = otg_dev->base; + hcd->self.otg_port = 1; + ++ /* Integrate TT in root hub, by default this is disbled. */ ++ hcd->has_tt = 1; ++ + /* Initialize the DWC OTG HCD. */ + dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); + dwc_otg_hcd->core_if = otg_dev->core_if; + otg_dev->hcd = dwc_otg_hcd; ++ init_hcd_usecs(dwc_otg_hcd); + + /* */ + spin_lock_init(&dwc_otg_hcd->lock); @@ -8534,6 +8541,7 @@ +{ + struct list_head *item; + dwc_otg_qh_t *qh; ++ unsigned long flags; + + if (!qh_list->next) { + /* The list hasn't been initialized yet. */ @@ -8543,10 +8551,12 @@ + /* Ensure there are no QTDs or URBs left. */ + kill_urbs_in_qh_list(hcd, qh_list); + ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags); + for (item = qh_list->next; item != qh_list; item = qh_list->next) { + qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); + dwc_otg_hcd_qh_remove_and_free(hcd, qh); + } ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); +} + +/** @@ -8838,6 +8848,10 @@ + urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv; + qh = (dwc_otg_qh_t *)ep->hcpriv; + ++ if (urb_qtd == NULL) { ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); ++ return 0; ++ } +#ifdef DEBUG + if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { + dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue"); @@ -8869,15 +8883,17 @@ + */ + dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd); + if (urb_qtd == qh->qtd_in_process) { ++ /* Note that dwc_otg_hcd_qh_deactivate() locks the spin_lock again */ ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); + dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); + qh->channel = NULL; + qh->qtd_in_process = NULL; -+ } else if (list_empty(&qh->qtd_list)) { -+ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); ++ } else { ++ if (list_empty(&qh->qtd_list)) ++ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); + } + -+ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); -+ + urb->hcpriv = NULL; + + /* Higher layer software sets URB status. */ @@ -8928,7 +8944,6 @@ + ep->hcpriv = NULL; +done: + SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); -+ +} + +/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if @@ -10085,6 +10100,7 @@ + DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); +#endif + ++ spin_lock(&hcd->lock); + /* Process entries in the periodic ready list. */ + qh_ptr = hcd->periodic_sched_ready.next; + while (qh_ptr != &hcd->periodic_sched_ready && @@ -10133,6 +10149,7 @@ + + hcd->non_periodic_channels++; + } ++ spin_unlock(&hcd->lock); + + return ret_val; +} @@ -10625,7 +10642,7 @@ +#endif /* DWC_DEVICE_ONLY */ --- /dev/null +++ b/drivers/usb/dwc/otg_hcd.h -@@ -0,0 +1,647 @@ +@@ -0,0 +1,652 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ + * $Revision: #45 $ @@ -10825,6 +10842,9 @@ + /** (micro)frame at which last start split was initialized. */ + uint16_t start_split_frame; + ++ u16 speed; ++ u16 frame_usecs[8]; ++ + /** @} */ + + /** Entry for QH in either the periodic or non-periodic schedule. */ @@ -10928,6 +10948,18 @@ + */ + uint16_t periodic_usecs; + ++ /* ++ * Total bandwidth claimed so far for all periodic transfers ++ * in a frame. ++ * This will include a mixture of HS and FS transfers. ++ * Units are microseconds per (micro)frame. ++ * We have a budget per frame and have to schedule ++ * transactions accordingly. ++ * Watch out for the fact that things are actually scheduled for the ++ * "next frame". ++ */ ++ u16 frame_usecs[8]; ++ + /** + * Frame number read from the core at SOF. The value ranges from 0 to + * DWC_HFNUM_MAX_FRNUM. @@ -11089,6 +11121,7 @@ +/** @{ */ + +/* Implemented in dwc_otg_hcd_queue.c */ ++extern int init_hcd_usecs(dwc_otg_hcd_t *hcd); +extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb); +extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb); +extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); @@ -11130,21 +11163,10 @@ + kfree(qtd); +} + -+/** Removes a QTD from list. -+ * @param[in] hcd HCD instance. -+ * @param[in] qtd QTD to remove from list. */ -+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd) -+{ -+ unsigned long flags; -+ SPIN_LOCK_IRQSAVE(&hcd->lock, flags); -+ list_del(&qtd->qtd_list_entry); -+ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); -+} -+ +/** Remove and free a QTD */ +static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd) +{ -+ dwc_otg_hcd_qtd_remove(hcd, qtd); ++ list_del(&qtd->qtd_list_entry); + dwc_otg_hcd_qtd_free(qtd); +} + @@ -11275,7 +11297,7 @@ +#endif /* DWC_DEVICE_ONLY */ --- /dev/null +++ b/drivers/usb/dwc/otg_hcd_intr.c -@@ -0,0 +1,1826 @@ +@@ -0,0 +1,1828 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ + * $Revision: #70 $ @@ -11884,6 +11906,7 @@ + + DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); + ++ spin_lock(&hcd->lock); + qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); + + if (qtd->complete_split) { @@ -11900,6 +11923,7 @@ + + qh->channel = NULL; + qh->qtd_in_process = NULL; ++ spin_unlock(&hcd->lock); + dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); +} + @@ -13104,7 +13128,7 @@ +#endif /* DWC_DEVICE_ONLY */ --- /dev/null +++ b/drivers/usb/dwc/otg_hcd_queue.c -@@ -0,0 +1,713 @@ +@@ -0,0 +1,794 @@ +/* ========================================================================== + * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ + * $Revision: #33 $ @@ -13262,6 +13286,7 @@ + INIT_LIST_HEAD(&qh->qtd_list); + INIT_LIST_HEAD(&qh->qh_list_entry); + qh->channel = NULL; ++ qh->speed = urb->dev->speed; + + /* FS/LS Enpoint on HS Hub + * NOT virtual root hub */ @@ -13283,10 +13308,10 @@ + + /** @todo Account for split transfers in the bus time. */ + int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); -+ qh->usecs = usb_calc_bus_time(urb->dev->speed, ++ qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed, + usb_pipein(urb->pipe), + (qh->ep_type == USB_ENDPOINT_XFER_ISOC), -+ bytecount); ++ bytecount)); + + /* Start in a slightly future (micro)frame. */ + qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, @@ -13365,73 +13390,159 @@ +} + +/** -+ * Checks that a channel is available for a periodic transfer. -+ * -+ * @return 0 if successful, negative error code otherise. ++ * Microframe scheduler ++ * track the total use in hcd->frame_usecs ++ * keep each qh use in qh->frame_usecs ++ * when surrendering the qh then donate the time back + */ -+static int periodic_channel_available(dwc_otg_hcd_t *hcd) ++static const u16 max_uframe_usecs[] = { 100, 100, 100, 100, 100, 100, 30, 0 }; ++ ++/* ++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init ++ */ ++int init_hcd_usecs(dwc_otg_hcd_t *hcd) +{ -+ /* -+ * Currently assuming that there is a dedicated host channnel for each -+ * periodic transaction plus at least one host channel for -+ * non-periodic transactions. -+ */ -+ int status; -+ int num_channels; ++ int i; + -+ num_channels = hcd->core_if->core_params->host_channels; -+ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) && -+ (hcd->periodic_channels < num_channels - 1)) { -+ status = 0; -+ } -+ else { -+ DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", -+ __func__, num_channels, hcd->periodic_channels, -+ hcd->non_periodic_channels); -+ status = -ENOSPC; -+ } ++ for (i = 0; i < 8; i++) ++ hcd->frame_usecs[i] = max_uframe_usecs[i]; + -+ return status; ++ return 0; +} + -+/** -+ * Checks that there is sufficient bandwidth for the specified QH in the -+ * periodic schedule. For simplicity, this calculation assumes that all the -+ * transfers in the periodic schedule may occur in the same (micro)frame. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH containing periodic bandwidth required. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++static int find_single_uframe(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ -+ int status; -+ uint16_t max_claimed_usecs; ++ int i; ++ u16 utime; ++ int t_left; ++ int ret; ++ int done; ++ ++ ret = -1; ++ utime = qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++ while (done == 0) { ++ /* At the start hcd->frame_usecs[i] = max_uframe_usecs[i]; */ ++ if (utime <= hcd->frame_usecs[i]) { ++ hcd->frame_usecs[i] -= utime; ++ qh->frame_usecs[i] += utime; ++ t_left -= utime; ++ ret = i; ++ done = 1; ++ return ret; ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } ++ } ++ return ret; ++} + -+ status = 0; ++/* ++ * use this for FS apps that can span multiple uframes ++ */ ++static int find_multi_uframe(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int i; ++ int j; ++ u16 utime; ++ int t_left; ++ int ret; ++ int done; ++ u16 xtime; ++ ++ ret = -1; ++ utime = qh->usecs; ++ t_left = utime; ++ i = 0; ++ done = 0; ++loop: ++ while (done == 0) { ++ if (hcd->frame_usecs[i] <= 0) { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ goto loop; ++ } + -+ if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) { -+ /* -+ * High speed mode. -+ * Max periodic usecs is 80% x 125 usec = 100 usec. -+ */ -+ max_claimed_usecs = 100 - qh->usecs; -+ } else { + /* -+ * Full speed mode. -+ * Max periodic usecs is 90% x 1000 usec = 900 usec. ++ * We need n consequtive slots so use j as a start slot. ++ * j plus j+1 must be enough time (for now) + */ -+ max_claimed_usecs = 900 - qh->usecs; ++ xtime = hcd->frame_usecs[i]; ++ for (j = i + 1; j < 8; j++) { ++ /* ++ * if we add this frame remaining time to xtime we may ++ * be OK, if not we need to test j for a complete frame. ++ */ ++ if ((xtime + hcd->frame_usecs[j]) < utime) { ++ if (hcd->frame_usecs[j] < max_uframe_usecs[j]) { ++ j = 8; ++ ret = -1; ++ continue; ++ } ++ } ++ if (xtime >= utime) { ++ ret = i; ++ j = 8; /* stop loop with a good value ret */ ++ continue; ++ } ++ /* add the frame time to x time */ ++ xtime += hcd->frame_usecs[j]; ++ /* we must have a fully available next frame or break */ ++ if ((xtime < utime) && ++ (hcd->frame_usecs[j] == max_uframe_usecs[j])) { ++ ret = -1; ++ j = 8; /* stop loop with a bad value ret */ ++ continue; ++ } ++ } ++ if (ret >= 0) { ++ t_left = utime; ++ for (j = i; (t_left > 0) && (j < 8); j++) { ++ t_left -= hcd->frame_usecs[j]; ++ if (t_left <= 0) { ++ qh->frame_usecs[j] += ++ hcd->frame_usecs[j] + t_left; ++ hcd->frame_usecs[j] = -t_left; ++ ret = i; ++ done = 1; ++ } else { ++ qh->frame_usecs[j] += ++ hcd->frame_usecs[j]; ++ hcd->frame_usecs[j] = 0; ++ } ++ } ++ } else { ++ i++; ++ if (i == 8) { ++ done = 1; ++ ret = -1; ++ } ++ } + } ++ return ret; ++} + -+ if (hcd->periodic_usecs > max_claimed_usecs) { -+ DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n", -+ __func__, hcd->periodic_usecs, qh->usecs); -+ status = -ENOSPC; -+ } ++static int find_uframe(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int ret = -1; + -+ return status; ++ if (qh->speed == USB_SPEED_HIGH) ++ /* if this is a hs transaction we need a full frame */ ++ ret = find_single_uframe(hcd, qh); ++ else ++ /* FS transaction may need a sequence of frames */ ++ ret = find_multi_uframe(hcd, qh); ++ ++ return ret; +} + +/** @@ -13467,58 +13578,55 @@ + +/** + * Schedules an interrupt or isochronous transfer in the periodic schedule. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for the periodic transfer. The QH should already contain the -+ * scheduling information. -+ * -+ * @return 0 if successful, negative error code otherwise. + */ +static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ -+ int status = 0; ++ int status; ++ struct usb_bus *bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); ++ int frame; + -+ status = periodic_channel_available(hcd); -+ if (status) { -+ DWC_NOTICE("%s: No host channel available for periodic " -+ "transfer.\n", __func__); -+ return status; ++ status = find_uframe(hcd, qh); ++ frame = -1; ++ if (status == 0) { ++ frame = 7; ++ } else { ++ if (status > 0) ++ frame = status - 1; + } -+ -+ status = check_periodic_bandwidth(hcd, qh); ++ /* Set the new frame up */ ++ if (frame > -1) { ++ qh->sched_frame &= ~0x7; ++ qh->sched_frame |= (frame & 7); ++ } ++ if (status != -1) ++ status = 0; + if (status) { -+ DWC_NOTICE("%s: Insufficient periodic bandwidth for " -+ "periodic transfer.\n", __func__); ++ pr_notice("%s: Insufficient periodic bandwidth for " ++ "periodic transfer.\n", __func__); + return status; + } -+ + status = check_max_xfer_size(hcd, qh); + if (status) { -+ DWC_NOTICE("%s: Channel max transfer size too small " -+ "for periodic transfer.\n", __func__); ++ pr_notice("%s: Channel max transfer size too small " ++ "for periodic transfer.\n", __func__); + return status; + } -+ + /* Always start in the inactive schedule. */ + list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive); + -+ /* Reserve the periodic channel. */ -+ hcd->periodic_channels++; -+ + /* Update claimed usecs per (micro)frame. */ + hcd->periodic_usecs += qh->usecs; + -+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ -+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval; -+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) { -+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++; -+ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n", -+ qh, qh->usecs, qh->interval); -+ } else { -+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++; -+ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n", -+ qh, qh->usecs, qh->interval); -+ } ++ /* ++ * Update average periodic bandwidth claimed and # periodic reqs for ++ * usbfs. ++ */ ++ bus->bandwidth_allocated += qh->usecs / qh->interval; ++ ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) ++ bus->bandwidth_int_reqs++; ++ else ++ bus->bandwidth_isoc_reqs++; + + return status; +} @@ -13569,32 +13677,29 @@ + +/** + * Removes an interrupt or isochronous transfer from the periodic schedule. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for the periodic transfer. + */ +static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) +{ -+ list_del_init(&qh->qh_list_entry); -+ -+ /* Release the periodic channel reservation. */ -+ hcd->periodic_channels--; ++ struct usb_bus *bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); ++ int i; + ++ list_del_init(&qh->qh_list_entry); + /* Update claimed usecs per (micro)frame. */ + hcd->periodic_usecs -= qh->usecs; -+ -+ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ -+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval; -+ -+ if (qh->ep_type == USB_ENDPOINT_XFER_INT) { -+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--; -+ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n", -+ qh, qh->usecs, qh->interval); -+ } else { -+ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--; -+ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n", -+ qh, qh->usecs, qh->interval); ++ for (i = 0; i < 8; i++) { ++ hcd->frame_usecs[i] += qh->frame_usecs[i]; ++ qh->frame_usecs[i] = 0; + } ++ /* ++ * Update average periodic bandwidth claimed and # periodic reqs for ++ * usbfs. ++ */ ++ bus->bandwidth_allocated -= qh->usecs / qh->interval; ++ ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) ++ bus->bandwidth_int_reqs--; ++ else ++ bus->bandwidth_isoc_reqs--; +} + +/**