From: Sungbo Eo Date: Sat, 1 Jan 2022 14:47:43 +0000 (+0900) Subject: mvebu: add support for ipTIME NAS1dual X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6ff970bb51f53c731b0612152734cec82ca92543;p=openwrt%2Fstaging%2Fneocturne.git mvebu: add support for ipTIME NAS1dual ipTIME NAS1dual is a 1-bay NAS, based on Marvell Armada 385 SoC. Specifications: * SoC: 88F6820 * RAM: 2 GiB * Flash: SPI NOR 64 MiB * SATA: 1x 3Gb/s * Ethernet: 2x 1GbE * USB: 1x 3.0 * Fan: 2 speed level * UART: J11 (115200 8N1) * Pinout: [3V3] (TXD) (RXD) (GND) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo --- diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network index 36769e8c18..c613a3cd60 100644 --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network @@ -18,6 +18,9 @@ mvebu_setup_interfaces() cznic,turris-omnia) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" "eth2" ;; + iptime,nas1dual) + ucidef_set_interface_lan "eth0 eth1" "dhcp" + ;; linksys,wrt1200ac|\ linksys,wrt1900ac-v1|\ linksys,wrt1900ac-v2|\ diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh index 030e66e699..18b978d437 100755 --- a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh @@ -5,6 +5,8 @@ RAMFS_COPY_BIN='fw_printenv fw_setenv strings' RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' + +PART_NAME=firmware REQUIRE_IMAGE_METADATA=1 platform_check_image() { diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-nas1dual.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-nas1dual.dts new file mode 100644 index 0000000000..d14ea8b94e --- /dev/null +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-nas1dual.dts @@ -0,0 +1,318 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Device Tree file for ipTIME NAS1dual + * + * Copyright (C) 2020 Sungbo Eo + * + * Based on armada-385-linksys.dtsi + * Copyright (C) 2015 Imre Kaloz + */ + +/dts-v1/; + +#include +#include +#include "armada-385.dtsi" + +/ { + model = "ipTIME NAS1dual"; + compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380"; + + aliases { + led-boot = &led_ready; + led-failsafe = &led_ready; + led-running = &led_ready; + led-upgrade = &led_ready; + label-mac-device = ð0; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = ; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + power { + label = "Power Button"; + linux,input-type = ; + linux,code = ; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + }; + + copy { + label = "USB Copy Button"; + linux,code = ; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds_pins>; + + led_ready: ready { + label = "blue:ready"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + hdd { + label = "blue:hdd"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + + usb { + label = "blue:usb"; + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&usb3_0_port1 &usb3_0_port2>; + linux,default-trigger = "usbport"; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_fan_pins>; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>, + <&gpio1 18 GPIO_ACTIVE_HIGH>; + /* We don't know the exact rpm, just use dummy values here. */ + gpio-fan,speed-map = <0 0>, <1 1>, <2 2>; + #cooling-cells = <2>; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&pca9536 1 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&sata_power_pins>; + + reg_sata_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "sata-power"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&gpio1 20 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; +}; + +&ahci0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + sata-port@0 { + reg = <0>; + target-supply = <®_sata_power>; + #thermal-sensor-cells = <0>; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + phy-handle = <ðphy1>; + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + nvmem-cells = <&macaddr_uboot_fffa8>; + nvmem-cell-names = "mac-address"; +}; + +ð1 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + nvmem-cells = <&macaddr_uboot_fffa8>; + nvmem-cell-names = "mac-address"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + pca9536: gpio@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "power-led", "power-board"; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + /* LED1: On - Link, Blink - Activity, Off - No Link */ + + ethphy0: ethernet-phy@0 { + reg = <0>; + marvell,reg-init = <3 16 0 0x1017>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + marvell,reg-init = <3 16 0 0x1017>; + }; +}; + +&pinctrl { + gpio_keys_pins: gpio-keys-pins { + marvell,pins = "mpp24", "mpp26", "mpp48"; + marvell,function = "gpio"; + }; + + gpio_leds_pins: gpio-leds-pins { + marvell,pins = "mpp18", "mpp20", "mpp51"; + marvell,function = "gpio"; + }; + + gpio_fan_pins: gpio-fan-pins { + marvell,pins = "mpp25", "mpp50"; + marvell,function = "gpio"; + }; + + sata_power_pins: sata-power-pins { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + uart1_pins_alt: uart-pins-1-alt { + marvell,pins = "mpp45", "mpp46"; + marvell,function = "ua1"; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_uboot_fffa8: macaddr@fffa8 { + reg = <0xfffa8 0x6>; + }; + }; + + partition@100000 { + reg = <0x00100000 0x03ec0000>; + label = "firmware"; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000000 0x00600000>; + label = "kernel"; + }; + + partition@600000 { + reg = <0x00600000 0x038c0000>; + label = "rootfs"; + }; + }; + + partition@3fc0000 { + reg = <0x03fc0000 0x00040000>; + label = "config"; + read-only; + }; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_alt>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_0_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_0_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; +}; diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index 06252670ab..b06c5594bd 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -78,6 +78,20 @@ define Device/globalscale_mirabox endef TARGET_DEVICES += globalscale_mirabox +define Device/iptime_nas1dual + DEVICE_VENDOR := ipTIME + DEVICE_MODEL := NAS1dual + DEVICE_PACKAGES := kmod-hwmon-drivetemp kmod-hwmon-gpiofan kmod-usb3 + SOC := armada-385 + KERNEL := kernel-bin | append-dtb | iptime-naspkg nas1dual + KERNEL_SIZE := 6144k + IMAGES := sysupgrade.bin + IMAGE_SIZE := 64256k + IMAGE/sysupgrade.bin := append-kernel | pad-to $$(KERNEL_SIZE) | \ + append-rootfs | pad-rootfs | check-size | append-metadata +endef +TARGET_DEVICES += iptime_nas1dual + define Device/kobol_helios4 DEVICE_VENDOR := Kobol DEVICE_MODEL := Helios4