From: Laurent Pinchart Date: Mon, 18 Jun 2012 14:24:48 +0000 (-0300) Subject: [media] omap3isp: preview: Add support for non-GRBG Bayer patterns X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6fd206cb6ebd59e42b376b9e2e8f40d90910757e;p=openwrt%2Fstaging%2Fblogic.git [media] omap3isp: preview: Add support for non-GRBG Bayer patterns Rearrange the CFA interpolation coefficients table based on the Bayer pattern. Support for non-Bayer CFA patterns is dropped as they were not correctly supported, and have never been tested. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/omap3isp/cfa_coef_table.h b/drivers/media/video/omap3isp/cfa_coef_table.h index c60df0ed075a..c84df0706f3e 100644 --- a/drivers/media/video/omap3isp/cfa_coef_table.h +++ b/drivers/media/video/omap3isp/cfa_coef_table.h @@ -23,7 +23,7 @@ * 02110-1301 USA */ -244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, +{ 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, @@ -31,8 +31,8 @@ 247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 12, 250, 4, 0, 27, 0, 250, -247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248, - 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, +247, 36, 27, 12, 0, 247, 0, 244, 0, 0, 40, 0, 0, 0, 0, 248 }, +{ 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, @@ -40,8 +40,8 @@ 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, 0, 0, 0, 248, 0, 0, 40, 0, 4, 250, 12, 244, 250, 0, 27, 0, - 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0, - 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, + 12, 27, 36, 247, 244, 0, 247, 0, 0, 40, 0, 0, 248, 0, 0, 0 }, +{ 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, @@ -49,8 +49,8 @@ 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, 4, 250, 12, 244, 250, 0, 27, 0, 12, 27, 36, 247, 244, 0, 247, 0, 0, 0, 0, 248, 0, 0, 40, 0, 0, 247, 0, 244, 247, 36, 27, 12, - 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0, -244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, + 0, 27, 0, 250, 244, 12, 250, 4, 0, 40, 0, 0, 248, 0, 0, 0 }, +{ 244,12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, 250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, @@ -58,4 +58,4 @@ 250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248, 244, 12, 250, 4, 0, 27, 0, 250, 247, 36, 27, 12, 0, 247, 0, 244, 248, 0, 0, 0, 0, 40, 0, 0, 244, 0, 247, 0, 12, 27, 36, 247, -250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248 +250, 0, 27, 0, 4, 250, 12, 244, 0, 0, 40, 0, 0, 0, 0, 248 }, diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c index 72d261835ad2..1ae1c0909ed1 100644 --- a/drivers/media/video/omap3isp/isppreview.c +++ b/drivers/media/video/omap3isp/isppreview.c @@ -131,7 +131,7 @@ static struct omap3isp_prev_csc flr_prev_csc = { * CFA Filter Coefficient Table * */ -static u32 cfa_coef_table[] = { +static u32 cfa_coef_table[4][OMAP3ISP_PREV_CFA_BLK_SIZE] = { #include "cfa_coef_table.h" }; @@ -237,19 +237,27 @@ static void preview_enable_hmed(struct isp_prev_device *prev, bool enable) } /* - * preview_config_cfa - Configure CFA Interpolation - */ -static void -preview_config_cfa(struct isp_prev_device *prev, - const struct prev_params *params) -{ - struct isp_device *isp = to_isp_device(prev); + * preview_config_cfa - Configure CFA Interpolation for Bayer formats + * + * The CFA table is organised in four blocks, one per Bayer component. The + * hardware expects blocks to follow the Bayer order of the input data, while + * the driver stores the table in GRBG order in memory. The blocks need to be + * reordered to support non-GRBG Bayer patterns. + */ +static void preview_config_cfa(struct isp_prev_device *prev, + const struct prev_params *params) +{ + static const unsigned int cfa_coef_order[4][4] = { + { 0, 1, 2, 3 }, /* GRBG */ + { 1, 0, 3, 2 }, /* RGGB */ + { 2, 3, 0, 1 }, /* BGGR */ + { 3, 2, 1, 0 }, /* GBRG */ + }; + const unsigned int *order = cfa_coef_order[prev->params.cfa_order]; const struct omap3isp_prev_cfa *cfa = ¶ms->cfa; + struct isp_device *isp = to_isp_device(prev); unsigned int i; - - isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_CFAFMT_MASK, - cfa->format << ISPPRV_PCR_CFAFMT_SHIFT); + unsigned int j; isp_reg_writel(isp, (cfa->gradthrs_vert << ISPPRV_CFA_GRADTH_VER_SHIFT) | @@ -259,9 +267,12 @@ preview_config_cfa(struct isp_prev_device *prev, isp_reg_writel(isp, ISPPRV_CFA_TABLE_ADDR, OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_ADDR); - for (i = 0; i < OMAP3ISP_PREV_CFA_TBL_SIZE; i++) { - isp_reg_writel(isp, cfa->table[i], - OMAP3_ISP_IOMEM_PREV, ISPPRV_SET_TBL_DATA); + for (i = 0; i < 4; ++i) { + const __u32 *block = cfa->table[order[i]]; + + for (j = 0; j < OMAP3ISP_PREV_CFA_BLK_SIZE; ++j) + isp_reg_writel(isp, block[j], OMAP3_ISP_IOMEM_PREV, + ISPPRV_SET_TBL_DATA); } } @@ -993,42 +1004,60 @@ preview_config_ycpos(struct isp_prev_device *prev, static void preview_config_averager(struct isp_prev_device *prev, u8 average) { struct isp_device *isp = to_isp_device(prev); - struct prev_params *params; - int reg = 0; - - params = (prev->params.active & OMAP3ISP_PREV_CFA) - ? &prev->params.params[0] : &prev->params.params[1]; - if (params->cfa.format == OMAP3ISP_CFAFMT_BAYER) - reg = ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT | - ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT | - average; - else if (params->cfa.format == OMAP3ISP_CFAFMT_RGBFOVEON) - reg = ISPPRV_AVE_EVENDIST_3 << ISPPRV_AVE_EVENDIST_SHIFT | - ISPPRV_AVE_ODDDIST_3 << ISPPRV_AVE_ODDDIST_SHIFT | - average; - isp_reg_writel(isp, reg, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); + isp_reg_writel(isp, ISPPRV_AVE_EVENDIST_2 << ISPPRV_AVE_EVENDIST_SHIFT | + ISPPRV_AVE_ODDDIST_2 << ISPPRV_AVE_ODDDIST_SHIFT | + average, OMAP3_ISP_IOMEM_PREV, ISPPRV_AVE); } + /* * preview_config_input_format - Configure the input format * @prev: The preview engine * @format: Format on the preview engine sink pad * - * Enable CFA interpolation for Bayer formats and disable it for greyscale - * formats. + * Enable and configure CFA interpolation for Bayer formats and disable it for + * greyscale formats. + * + * The CFA table is organised in four blocks, one per Bayer component. The + * hardware expects blocks to follow the Bayer order of the input data, while + * the driver stores the table in GRBG order in memory. The blocks need to be + * reordered to support non-GRBG Bayer patterns. */ static void preview_config_input_format(struct isp_prev_device *prev, const struct v4l2_mbus_framefmt *format) { struct isp_device *isp = to_isp_device(prev); + struct prev_params *params; - if (format->code != V4L2_MBUS_FMT_Y10_1X10) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_CFAEN); - else + switch (format->code) { + case V4L2_MBUS_FMT_SGRBG10_1X10: + prev->params.cfa_order = 0; + break; + case V4L2_MBUS_FMT_SRGGB10_1X10: + prev->params.cfa_order = 1; + break; + case V4L2_MBUS_FMT_SBGGR10_1X10: + prev->params.cfa_order = 2; + break; + case V4L2_MBUS_FMT_SGBRG10_1X10: + prev->params.cfa_order = 3; + break; + default: + /* Disable CFA for non-Bayer formats. */ isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN); + return; + } + + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, ISPPRV_PCR_CFAEN); + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_CFAFMT_MASK, ISPPRV_PCR_CFAFMT_BAYER); + + params = (prev->params.active & OMAP3ISP_PREV_CFA) + ? &prev->params.params[0] : &prev->params.params[1]; + + preview_config_cfa(prev, params); } /* @@ -1371,22 +1400,6 @@ static void preview_configure(struct isp_prev_device *prev) active = prev->params.active; spin_unlock_irqrestore(&prev->params.lock, flags); - preview_setup_hw(prev, update, active); - - if (prev->output & PREVIEW_OUTPUT_MEMORY) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_SDRPORT); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_SDRPORT); - - if (prev->output & PREVIEW_OUTPUT_RESIZER) - isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_RSZPORT); - else - isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, - ISPPRV_PCR_RSZPORT); - /* PREV_PAD_SINK */ format = &prev->formats[PREV_PAD_SINK]; @@ -1401,9 +1414,25 @@ static void preview_configure(struct isp_prev_device *prev) preview_config_inlineoffset(prev, ALIGN(format->width, 0x20) * 2); + preview_setup_hw(prev, update, active); + /* PREV_PAD_SOURCE */ format = &prev->formats[PREV_PAD_SOURCE]; + if (prev->output & PREVIEW_OUTPUT_MEMORY) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_SDRPORT); + + if (prev->output & PREVIEW_OUTPUT_RESIZER) + isp_reg_set(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_PREV, ISPPRV_PCR, + ISPPRV_PCR_RSZPORT); + if (prev->output & PREVIEW_OUTPUT_MEMORY) preview_config_outlineoffset(prev, ALIGN(format->width, 0x10) * 2); diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h index 6663ab64e4b1..f66923407f8c 100644 --- a/drivers/media/video/omap3isp/isppreview.h +++ b/drivers/media/video/omap3isp/isppreview.h @@ -144,6 +144,7 @@ struct isp_prev_device { struct isp_video video_out; struct { + unsigned int cfa_order; struct prev_params params[2]; u32 active; spinlock_t lock; diff --git a/include/linux/omap3isp.h b/include/linux/omap3isp.h index 0cddaa9d08bb..c090cf9249bb 100644 --- a/include/linux/omap3isp.h +++ b/include/linux/omap3isp.h @@ -437,6 +437,7 @@ struct omap3isp_ccdc_update_config { #define OMAP3ISP_PREV_NF_TBL_SIZE 64 #define OMAP3ISP_PREV_CFA_TBL_SIZE 576 +#define OMAP3ISP_PREV_CFA_BLK_SIZE (OMAP3ISP_PREV_CFA_TBL_SIZE / 4) #define OMAP3ISP_PREV_GAMMA_TBL_SIZE 1024 #define OMAP3ISP_PREV_YENH_TBL_SIZE 128 @@ -478,7 +479,7 @@ struct omap3isp_prev_cfa { enum omap3isp_cfa_fmt format; __u8 gradthrs_vert; __u8 gradthrs_horz; - __u32 table[OMAP3ISP_PREV_CFA_TBL_SIZE]; + __u32 table[4][OMAP3ISP_PREV_CFA_BLK_SIZE]; }; /**