From: Felix Fietkau Date: Wed, 19 Aug 2009 15:13:00 +0000 (+0000) Subject: madwifi: add patch for building all modules (except for the HAL) into a single module... X-Git-Tag: reboot~22634 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6fb461da2bd74ff73e7138e2bc41d446232a0534;p=openwrt%2Fstaging%2Flynxis.git madwifi: add patch for building all modules (except for the HAL) into a single module. saves space and gets rid of unnecessary exports removes support for onoe and amrr - I don't think anybody needs these anymore SVN-Revision: 17314 --- diff --git a/package/madwifi/Config.in b/package/madwifi/Config.in index 23cc433f3d..802e52a663 100644 --- a/package/madwifi/Config.in +++ b/package/madwifi/Config.in @@ -30,6 +30,15 @@ config MADWIFI_UPSTREAM endchoice +config MADWIFI_SINGLE_MODULE + bool "Combine driver and net80211 into a single module" + depends on PACKAGE_kmod-madwifi + default y + help + This option combines all driver and stack related code (except for HAL) + into a single module, thus saving space and removing unnecessary kernel + exports + choice prompt "Rate control algorithm selection" depends on PACKAGE_kmod-madwifi @@ -46,38 +55,6 @@ config MADWIFI_RCA_MINSTREL always wander in directions where he/she feels he/she will get paid the best for his/her work. -config MADWIFI_RCA_ONOE - bool "Use the Onoe rate control algorithm" - help - Onoe is a credit based RCA where the value of the credit is determined - by the frequency of successful, erroneous and retransmissions - accumulated during a fixed invocation period of 1000 ms. If less than - 10% of the packets need to be retransmitted at a particular rate, Onoe - keeps increasing its credit point till the threshold value of 10 is - reached. At this point, the current transmission rate is increased to - the next available higher rate and the process repeated with credit - score of zero. Similar logic holds for deducting the credit score and - moving to a lower bit-rate for failed packet - transmission/retransmission attempts. However, once a bit-rate has - been marked as failure in the previous attempt, Onoe will not attempt - to select that bit-rate until 10 seconds have elapsed since the last - attempt. Due to the manner in which it operates, Onoe is conservative - in rate selection and is less sensitive to individual packet failure. - -config MADWIFI_RCA_AMRR - bool "Use the AMRR rate control algorithm" - help - AMRR uses Binary Exponential Backoff (BEB) technique to adapt the - length (threshold) of the sampling period used to change the values of - bit-rate and transmission count parameters. It uses probe packets and - depending on their transmission status adaptively changes the threshold - value. The adaptation mechanism ensures fewer failed - transmission/retransmission and higher throughput by not switching to a - higher rate as specified by the backoff mechanism. In addition to this, - the AMRR employs heuristics to capture the short-term variations of the - channel by judiciously setting the rate and transmission count - parameters. - config MADWIFI_RCA_SAMPLERATE bool "Use the SampleRate rate control algorithm" help diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile index 250c6fd68d..632b77fec5 100644 --- a/package/madwifi/Makefile +++ b/package/madwifi/Makefile @@ -124,6 +124,9 @@ ifdef CONFIG_MADWIFI_RCA_SAMPLERATE RATE_CONTROL:=sample endif +ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),) +MADWIFI_FILES:= $(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) +else MADWIFI_FILES:= \ $(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \ $(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \ @@ -134,9 +137,13 @@ MADWIFI_FILES:= \ $(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \ $(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \ $(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \ - $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \ + $(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) +endif -MADWIFI_AUTOLOAD:= \ +ifneq ($(CONFIG_MADWIFI_SINGLE_MODULE),) + MADWIFI_AUTOLOAD:= ath_hal +else + MADWIFI_AUTOLOAD:= \ wlan \ wlan_scan_ap \ wlan_scan_sta \ @@ -146,7 +153,8 @@ MADWIFI_AUTOLOAD:= \ wlan_ccmp \ wlan_tkip \ wlan_wep \ - wlan_xauth \ + wlan_xauth +endif ifeq ($(findstring AHB,$(BUS)),AHB) MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX) @@ -202,14 +210,15 @@ MAKE_ARGS:= \ TOOLPATH="$(KERNEL_CROSS)" \ KERNELPATH="$(LINUX_DIR)" \ LDOPTS="--no-warn-mismatch " \ - ATH_RATE="ath_rate/$(RATE_CONTROL)" \ + ATH_RATE="$(RATE_CONTROL)" \ ATH_CAP_SUPERG_COMP="$(COMPRESSION)" \ DO_MULTI=1 \ + SINGLE_MODULE=$(if $(CONFIG_MADWIFI_SINGLE_MODULE),1) \ INCS="$(MADWIFI_INC)" \ $(if $(CONFIG_MADWIFI_DEBUG),,DEBUG=) WARNINGS="-Wno-unused" MAKE_VARS:= \ - COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \ + COPTS="-DATH_REVERSE_ENGINEERING=1" \ ifeq ($(CONFIG_MADWIFI_UPSTREAM),) define Build/Prepare/HAL diff --git a/package/madwifi/patches/446-single_module.patch b/package/madwifi/patches/446-single_module.patch new file mode 100644 index 0000000000..2ad9af87e2 --- /dev/null +++ b/package/madwifi/patches/446-single_module.patch @@ -0,0 +1,778 @@ +--- a/ath/Makefile ++++ b/ath/Makefile +@@ -41,7 +41,6 @@ + # + + obj := $(firstword $(obj) $(SUBDIRS) .) +-TOP = $(obj)/.. + + ifeq ($(strip $(BUS)),AHB) + BUSNAME=ahb +@@ -57,7 +56,24 @@ COPTS += -DDFS_DOMAIN_ETSI -DDFS_DOMAIN_ + include $(TOP)/Makefile.inc + + obj-m += ath_$(BUSNAME).o +-ath_$(BUSNAME)-objs := if_ath.o if_ath_radar.o if_ath_$(BUSNAME).o ++ath_objs := if_ath.o if_ath_radar.o if_ath_$(BUSNAME).o ++ath_$(BUSNAME)-objs := $(ath_objs) ++ ++ifneq ($(SINGLE_MODULE),) ++include $(TOP)/net80211/Makefile ++include $(TOP)/ath_rate/sample/Makefile ++include $(TOP)/ath_rate/minstrel/Makefile ++RC_DECLARE=$(foreach R,$(ATH_RATE),extern void ath_rate_$(R)_init(void);extern void ath_rate_$(R)_exit(void);) ++RC_INIT=$(foreach R,$(ATH_RATE),ath_rate_$(R)_init();) ++RC_EXIT=$(foreach R,$(ATH_RATE),ath_rate_$(R)_exit();) ++ ++ath_$(BUSNAME)-objs += $(patsubst %,../net80211/%,$(wlan-objs) $(foreach var,wep tkip ccmp acl xauth scan_sta scan_ap,$(wlan_$(var)-objs))) $(foreach RC,$(ATH_RATE),$(patsubst %,../ath_rate/$(RC)/%,$(ath_rate_$(RC)-objs))) ++ifdef LINUX24 ++ ath_$(BUSNAME)-linkobjs := $(ath_objs) $(wlan-objs) $(foreach var,wep tkip ccmp acl xauth scan_sta scan_ap,$(wlan_$(var)-objs)) $(foreach RC,$(ATH_RATE),$(ath_rate_$(RC)-objs)) ++endif ++ ++EXTRA_CFLAGS += -DSINGLE_MODULE -DRC_INIT="$(RC_INIT)" -DRC_EXIT="$(RC_EXIT)" -DRC_DECLARE="$(RC_DECLARE)" ++endif + + INCS += -I$(TOP) -I$(ATH_HAL) -I$(HAL) -I$(WLAN) + +@@ -72,13 +88,8 @@ install: + test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH) + install -m 0644 ath_$(BUSNAME).$(KMODSUF) $(DESTDIR)/$(KMODPATH) + +-clean: +- rm -f *~ *.o *.ko *.mod.c .*.cmd +- rm -f .depend .version .*.o.flags .*.o.d +- rm -rf .tmp_versions +- + ath_$(BUSNAME).o: $(ath_$(BUSNAME)-objs) +- $(LD) $(LDOPTS) -o ath_$(BUSNAME).$(KMODSUF) -r $(ath_$(BUSNAME)-objs) ++ $(LD) $(LDOPTS) -o ath_$(BUSNAME).$(KMODSUF) -r $(if $(ath_$(BUSNAME)-linkobjs),$(ath_$(BUSNAME)-linkobjs),$(ath_$(BUSNAME)-objs)) + + if_ath_hal.h: $(HAL)/ah.h + $(TOP)/scripts/if_ath_hal_generator.pl $< $@ +--- a/net80211/ieee80211_acl.c ++++ b/net80211/ieee80211_acl.c +@@ -281,16 +281,6 @@ acl_getpolicy(struct ieee80211vap *vap) + return as->as_policy; + } + +-/* +- * Module glue. +- */ +- +-MODULE_AUTHOR("Errno Consulting, Sam Leffler"); +-MODULE_DESCRIPTION("802.11 wireless support: MAC-based ACL policy"); +-#ifdef MODULE_LICENSE +-MODULE_LICENSE("Dual BSD/GPL"); +-#endif +- + static const struct ieee80211_aclator mac = { + .iac_name = "mac", + .iac_attach = acl_attach, +@@ -303,6 +293,18 @@ static const struct ieee80211_aclator ma + .iac_getpolicy = acl_getpolicy, + }; + ++#include "module.h" ++/* ++ * Module glue. ++ */ ++ ++MODULE_AUTHOR("Errno Consulting, Sam Leffler"); ++MODULE_DESCRIPTION("802.11 wireless support: MAC-based ACL policy"); ++#ifdef MODULE_LICENSE ++MODULE_LICENSE("Dual BSD/GPL"); ++#endif ++ ++ + static int __init + init_ieee80211_acl(void) + { +--- a/net80211/ieee80211_crypto_ccmp.c ++++ b/net80211/ieee80211_crypto_ccmp.c +@@ -686,6 +686,8 @@ ccmp_decrypt(struct ieee80211_key *key, + } + #undef CCMP_DECRYPT + ++#include "module.h" ++ + /* + * Module glue. + */ +--- a/net80211/ieee80211_crypto_tkip.c ++++ b/net80211/ieee80211_crypto_tkip.c +@@ -1046,6 +1046,8 @@ tkip_decrypt(struct tkip_ctx *ctx, struc + return 1; + } + ++#include "module.h" ++ + /* + * Module glue. + */ +--- a/net80211/ieee80211_crypto_wep.c ++++ b/net80211/ieee80211_crypto_wep.c +@@ -497,6 +497,8 @@ wep_decrypt(struct ieee80211_key *key, s + * Module glue. + */ + ++#include "module.h" ++ + MODULE_AUTHOR("Errno Consulting, Sam Leffler"); + MODULE_DESCRIPTION("802.11 wireless support: WEP cipher"); + #ifdef MODULE_LICENSE +--- a/net80211/ieee80211_linux.c ++++ b/net80211/ieee80211_linux.c +@@ -1015,6 +1015,10 @@ static struct notifier_block ieee80211_e + static char *version = RELEASE_VERSION; + static char *dev_info = "wlan"; + ++extern void ieee80211_auth_setup(void); ++ ++#include "module.h" ++ + MODULE_AUTHOR("Errno Consulting, Sam Leffler"); + MODULE_DESCRIPTION("802.11 wireless LAN protocol support"); + #ifdef MODULE_VERSION +@@ -1024,8 +1028,6 @@ MODULE_VERSION(RELEASE_VERSION); + MODULE_LICENSE("Dual BSD/GPL"); + #endif + +-extern void ieee80211_auth_setup(void); +- + static int __init + init_wlan(void) + { +--- a/net80211/ieee80211_scan_ap.c ++++ b/net80211/ieee80211_scan_ap.c +@@ -763,15 +763,6 @@ action_tasklet(IEEE80211_TQUEUE_ARG data + (*ss->ss_ops->scan_default)(vap, &as->as_selbss); + } + +-/* +- * Module glue. +- */ +-MODULE_AUTHOR("Errno Consulting, Sam Leffler"); +-MODULE_DESCRIPTION("802.11 wireless support: default ap scanner"); +-#ifdef MODULE_LICENSE +-MODULE_LICENSE("Dual BSD/GPL"); +-#endif +- + static const struct ieee80211_scanner ap_default = { + .scan_name = "default", + .scan_attach = ap_attach, +@@ -789,6 +780,16 @@ static const struct ieee80211_scanner ap + .scan_default = ap_default_action, + }; + ++#include "module.h" ++ ++/* ++ * Module glue. ++ */ ++MODULE_AUTHOR("Errno Consulting, Sam Leffler"); ++MODULE_DESCRIPTION("802.11 wireless support: default ap scanner"); ++#ifdef MODULE_LICENSE ++MODULE_LICENSE("Dual BSD/GPL"); ++#endif + + static int __init + init_scanner_ap(void) +--- a/net80211/ieee80211_scan_sta.c ++++ b/net80211/ieee80211_scan_sta.c +@@ -1208,6 +1208,8 @@ action_tasklet(IEEE80211_TQUEUE_ARG data + ieee80211_start_scan(vap, ss->ss_flags, ss->ss_duration, ss->ss_nssid, ss->ss_ssid); + } + ++#include "module.h" ++ + /* + * Module glue. + */ +@@ -1217,6 +1219,7 @@ MODULE_DESCRIPTION("802.11 wireless supp + MODULE_LICENSE("Dual BSD/GPL"); + #endif + ++ + static int __init + init_scanner_sta(void) + { +--- a/net80211/ieee80211_xauth.c ++++ b/net80211/ieee80211_xauth.c +@@ -65,15 +65,6 @@ + #include + + /* +- * Module glue. +- */ +-MODULE_AUTHOR("Errno Consulting, Sam Leffler"); +-MODULE_DESCRIPTION("802.11 wireless support: external (user mode) authenticator"); +-#ifdef MODULE_LICENSE +-MODULE_LICENSE("Dual BSD/GPL"); +-#endif +- +-/* + * One module handles everything for now. May want + * to split things up for embedded applications. + */ +@@ -85,6 +76,18 @@ static const struct ieee80211_authentica + .ia_node_leave = NULL, + }; + ++#include "module.h" ++ ++/* ++ * Module glue. ++ */ ++MODULE_AUTHOR("Errno Consulting, Sam Leffler"); ++MODULE_DESCRIPTION("802.11 wireless support: external (user mode) authenticator"); ++#ifdef MODULE_LICENSE ++MODULE_LICENSE("Dual BSD/GPL"); ++#endif ++ ++ + static int __init + init_ieee80211_xauth(void) + { +--- a/net80211/Makefile ++++ b/net80211/Makefile +@@ -40,7 +40,11 @@ + # Makefile for the 802.11 WLAN modules. + # + obj := $(firstword $(obj) $(SUBDIRS) .) +-TOP = $(obj)/.. ++ ++include $(TOP)/Makefile.inc ++ ++ifeq ($(SINGLE_MODULE),) ++ + # + # There is one authenticator mechanism: an in-kernel implementation + # (wlan_xauth). +@@ -59,29 +63,8 @@ MOD_INSTALL := wlan.o wlan_wep.o wlan_tk + + obj-m += $(MOD_INSTALL) + +-wlan-objs := if_media.o \ +- ieee80211_skb.o \ +- ieee80211.o ieee80211_beacon.o ieee80211_crypto.o \ +- ieee80211_crypto_none.o ieee80211_input.o ieee80211_node.o \ +- ieee80211_output.o ieee80211_power.o ieee80211_proto.o \ +- ieee80211_scan.o ieee80211_wireless.o ieee80211_linux.o \ +- ieee80211_monitor.o ieee80211_rate.o +-wlan_wep-objs := ieee80211_crypto_wep.o +-wlan_tkip-objs := ieee80211_crypto_tkip.o +-wlan_ccmp-objs := ieee80211_crypto_ccmp.o +-wlan_acl-objs := ieee80211_acl.o +-wlan_xauth-objs := ieee80211_xauth.o +-wlan_scan_sta-objs :=ieee80211_scan_sta.o +-wlan_scan_ap-objs := ieee80211_scan_ap.o +- +-include $(TOP)/Makefile.inc +- + INCS += -I$(TOP) -I$(ATH_HAL) -I$(HAL) + +-EXTRA_CFLAGS+=$(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\" +- +--include $(TOPDIR)/Rules.make +- + all: + $(MAKE) -C $(KERNELPATH) SUBDIRS=$(shell pwd) modules + +@@ -108,8 +91,28 @@ install: + f=`basename $$i .o`; \ + install -m 0644 $$f.$(KMODSUF) $(DESTDIR)/$(KMODPATH); \ + done ++else ++all: ++endif ++ ++wlan-objs := if_media.o \ ++ ieee80211_skb.o \ ++ ieee80211.o ieee80211_beacon.o ieee80211_crypto.o \ ++ ieee80211_crypto_none.o ieee80211_input.o ieee80211_node.o \ ++ ieee80211_output.o ieee80211_power.o ieee80211_proto.o \ ++ ieee80211_scan.o ieee80211_wireless.o ieee80211_linux.o \ ++ ieee80211_monitor.o ieee80211_rate.o ++wlan_wep-objs := ieee80211_crypto_wep.o ++wlan_tkip-objs := ieee80211_crypto_tkip.o ++wlan_ccmp-objs := ieee80211_crypto_ccmp.o ++wlan_acl-objs := ieee80211_acl.o ++wlan_xauth-objs := ieee80211_xauth.o ++wlan_scan_sta-objs :=ieee80211_scan_sta.o ++wlan_scan_ap-objs := ieee80211_scan_ap.o ++ ++ ++EXTRA_CFLAGS+=$(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\" ++ ++-include $(TOPDIR)/Rules.make ++ + +-clean: +- -rm -f *~ *.o *.ko *.mod.c +- -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd +- -rm -rf .tmp_versions +--- /dev/null ++++ b/net80211/module.h +@@ -0,0 +1,19 @@ ++#ifdef SINGLE_MODULE ++ ++#undef static ++#define static ++#undef module_init ++#undef module_exit ++#define module_init(...) ++#define module_exit(...) ++ ++#undef MODULE_AUTHOR ++#undef MODULE_LICENSE ++#undef MODULE_VERSION ++#undef MODULE_DESCRIPTION ++#define MODULE_AUTHOR(...) ++#define MODULE_LICENSE(...) ++#define MODULE_VERSION(...) ++#define MODULE_DESCRIPTION(...) ++ ++#endif +--- a/ath/if_ath.c ++++ b/ath/if_ath.c +@@ -13777,3 +13777,5 @@ cleanup_ath_buf(struct ath_softc *sc, st + return bf; + } + ++ ++ +--- a/net80211/ieee80211.c ++++ b/net80211/ieee80211.c +@@ -42,6 +42,7 @@ + #include + #endif + #include ++#include + #include + #include + #include +@@ -2014,3 +2015,65 @@ ieee80211_build_sc_ie(struct ieee80211co + int ath_debug_global = 0; + EXPORT_SYMBOL(ath_debug_global); + ++#ifdef SINGLE_MODULE ++typedef void (*initfunc)(void); ++ ++extern void init_ieee80211_acl(void); ++extern void init_crypto_ccmp(void); ++extern void init_crypto_tkip(void); ++extern void init_crypto_wep(void); ++extern void init_wlan(void); ++extern void init_scanner_ap(void); ++extern void init_scanner_sta(void); ++extern void init_ieee80211_xauth(void); ++ ++extern void exit_ieee80211_acl(void); ++extern void exit_crypto_ccmp(void); ++extern void exit_crypto_tkip(void); ++extern void exit_crypto_wep(void); ++extern void exit_wlan(void); ++extern void exit_scanner_ap(void); ++extern void exit_scanner_sta(void); ++extern void exit_ieee80211_xauth(void); ++ ++static __initdata initfunc net80211_init[] = { ++ init_wlan, ++ init_ieee80211_acl, ++ init_crypto_ccmp, ++ init_crypto_tkip, ++ init_crypto_wep, ++ init_ieee80211_xauth, ++ init_scanner_ap, ++ init_scanner_sta, ++}; ++ ++static __exitdata initfunc net80211_exit[] = { ++ exit_crypto_ccmp, ++ exit_crypto_tkip, ++ exit_crypto_wep, ++ exit_scanner_ap, ++ exit_scanner_sta, ++ exit_ieee80211_xauth, ++ exit_ieee80211_acl, ++ exit_wlan, ++}; ++ ++void net80211_init_module(void) ++{ ++ int i; ++ for (i = 0; i < sizeof(net80211_init)/sizeof(net80211_init[0]); i++) { ++ if (net80211_init[i]) ++ net80211_init[i](); ++ } ++} ++ ++void net80211_exit_module(void) ++{ ++ int i; ++ for (i = 0; i < sizeof(net80211_exit)/sizeof(net80211_exit[0]); i++) { ++ if (net80211_exit[i]) ++ net80211_exit[i](); ++ } ++} ++ ++#endif +--- a/ath/if_ath_ahb.c ++++ b/ath/if_ath_ahb.c +@@ -447,10 +447,18 @@ MODULE_SUPPORTED_DEVICE("Atheros WLAN ca + MODULE_LICENSE("Dual BSD/GPL"); + #endif + ++#ifdef SINGLE_MODULE ++RC_DECLARE ++#endif ++ + static int __init + init_ath_ahb(void) + { + printk(KERN_INFO "%s: %s\n", dev_info, version); ++#ifdef SINGLE_MODULE ++ net80211_init_module(); ++ RC_INIT ++#endif + platform_driver_register(&ahb_wmac_driver); + ath_sysctl_register(); + +@@ -463,6 +471,10 @@ exit_ath_ahb(void) + { + ath_sysctl_unregister(); + platform_driver_unregister(&ahb_wmac_driver); ++#ifdef SINGLE_MODULE ++ RC_EXIT ++ net80211_exit_module(); ++#endif + printk(KERN_INFO "%s: driver unloaded\n", dev_info); + } + module_exit(exit_ath_ahb); +--- a/ath/if_ath_pci.c ++++ b/ath/if_ath_pci.c +@@ -415,11 +415,19 @@ MODULE_SUPPORTED_DEVICE("Atheros WLAN ca + MODULE_LICENSE("Dual BSD/GPL"); + #endif + ++#ifdef SINGLE_MODULE ++RC_DECLARE ++#endif ++ + static int __init + init_ath_pci(void) + { + printk(KERN_INFO "%s: %s\n", dev_info, version); + ++#ifdef SINGLE_MODULE ++ net80211_init_module(); ++ RC_INIT ++#endif + if (pci_register_driver(&ath_pci_driver) < 0) { + printk(KERN_ERR "%s: No devices found, driver not installed.\n", dev_info); + return (-ENODEV); +@@ -434,6 +442,10 @@ exit_ath_pci(void) + { + ath_sysctl_unregister(); + pci_unregister_driver(&ath_pci_driver); ++#ifdef SINGLE_MODULE ++ RC_EXIT ++ net80211_exit_module(); ++#endif + + printk(KERN_INFO "%s: driver unloaded\n", dev_info); + } +--- a/ath_rate/minstrel/Makefile ++++ b/ath_rate/minstrel/Makefile +@@ -39,9 +39,7 @@ + # Makefile for the Atheros Rate Control Support. + # + obj := $(firstword $(obj) $(SUBDIRS) .) +-TOP = $(obj)/../.. + +-obj-m += ath_rate_minstrel.o + ath_rate_minstrel-objs := minstrel.o + + include $(TOP)/Makefile.inc +@@ -50,6 +48,10 @@ INCS += -I$(TOP) -I$(ATH) -I$(ATH_HAL) - + + EXTRA_CFLAGS+= $(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\" + ++ifeq ($(SINGLE_MODULE),) ++ ++obj-m += ath_rate_minstrel.o ++ + -include $(TOPDIR)/Rules.make + + all: +@@ -59,10 +61,9 @@ install: + test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH) + install -m 0644 ath_rate_minstrel.$(KMODSUF) $(DESTDIR)/$(KMODPATH) + +-clean: +- -rm -f *~ *.o *.ko *.mod.c +- -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd +- -rm -rf .tmp_versions +- + ath_rate_minstrel.o: $(ath_rate_minstrel-objs) + $(LD) $(LDOPTS) -o ath_rate_minstrel.$(KMODSUF) -r $(ath_rate_minstrel-objs) ++else ++all: ++install: ++endif +--- a/ath_rate/minstrel/minstrel.c ++++ b/ath_rate/minstrel/minstrel.c +@@ -945,6 +945,8 @@ static struct ieee80211_rate_ops ath_rat + .dynamic_proc_register = ath_rate_dynamic_proc_register, + }; + ++#include ++ + MODULE_AUTHOR("John Bicket/Derek Smithies"); + MODULE_DESCRIPTION("Minstrel Rate bit-rate selection algorithm for Atheros devices"); + #ifdef MODULE_VERSION +--- a/net80211/ieee80211_var.h ++++ b/net80211/ieee80211_var.h +@@ -47,6 +47,7 @@ + #include + #include + #include ++#include "symbol.h" + + /* NB: + * - Atheros chips use 6 bits when power is specified in whole dBm units, with +@@ -741,6 +742,8 @@ void ieee80211_dfs_action(struct ieee802 + void ieee80211_expire_channel_excl_restrictions(struct ieee80211com *); + void ieee80211_setpuregbasicrates(struct ieee80211_rateset *rs); + int ieee80211_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); ++void net80211_init_module(void); ++void net80211_exit_module(void); + + /* + * Iterate through ic_channels to enumerate all distinct ic_ieee channel numbers. +--- a/net80211/ieee80211_linux.h ++++ b/net80211/ieee80211_linux.h +@@ -521,7 +521,10 @@ extern struct sk_buff * ieee80211_getmgt + #define IF_DRAIN(_q) skb_queue_drain(_q) + extern void skb_queue_drain(struct sk_buff_head *q); + +-#ifndef __MOD_INC_USE_COUNT ++#ifdef SINGLE_MODULE ++#define _MOD_DEC_USE(_m) do {} while(0) ++#define _MOD_INC_USE(_m, _err) do {} while(0) ++#elif !defined(__MOD_INC_USE_COUNT) + #define _MOD_INC_USE(_m, _err) \ + if (!try_module_get(_m)) { \ + printk(KERN_WARNING "%s: try_module_get failed\n", \ +--- a/ath_rate/sample/Makefile ++++ b/ath_rate/sample/Makefile +@@ -39,9 +39,7 @@ + # Makefile for the Atheros Rate Control Support. + # + obj := $(firstword $(obj) $(SUBDIRS) .) +-TOP = $(obj)/../.. + +-obj-m += ath_rate_sample.o + ath_rate_sample-objs := sample.o + + include $(TOP)/Makefile.inc +@@ -50,6 +48,9 @@ INCS += -I$(TOP) -I$(ATH) -I$(ATH_HAL) - + + EXTRA_CFLAGS+= $(INCS) $(COPTS) -DOPT_AH_H=\"public/$(TARGET).opt_ah.h\" + ++ifeq ($(SINGLE_MODULE),) ++obj-m += ath_rate_sample.o ++ + -include $(TOPDIR)/Rules.make + + all: +@@ -59,10 +60,9 @@ install: + test -d $(DESTDIR)/$(KMODPATH) || mkdir -p $(DESTDIR)/$(KMODPATH) + install -m 0644 ath_rate_sample.$(KMODSUF) $(DESTDIR)/$(KMODPATH) + +-clean: +- -rm -f *~ *.o *.ko *.mod.c +- -rm -f .depend .version .*.o.flags .*.o.d .*.o.cmd .*.ko.cmd +- -rm -rf .tmp_versions +- + ath_rate_sample.o: $(ath_rate_sample-objs) + $(LD) $(LDOPTS) -o ath_rate_sample.$(KMODSUF) -r $(ath_rate_sample-objs) ++else ++all: ++install: ++endif +--- a/Makefile ++++ b/Makefile +@@ -41,7 +41,7 @@ + # + + obj := $(firstword $(obj) $(SUBDIRS) .) +-TOP = $(obj) ++export TOP:=$(if $(wildcard $(firstword $(SUBDIRS))/Makefile.inc),$(firstword $(SUBDIRS)),$(CURDIR)) + + ifneq (svnversion.h,$(MAKECMDGOALS)) + include $(TOP)/Makefile.inc +@@ -54,7 +54,7 @@ all: modules tools + modules: configcheck svnversion.h + ifdef LINUX24 + for i in $(obj-y); do \ +- $(MAKE) -C $$i || exit 1; \ ++ $(MAKE) -C $$i TOP="$(TOP)" || exit 1; \ + done + else + $(MAKE) -C $(KERNELPATH) SUBDIRS=$(shell pwd) modules +@@ -89,7 +89,7 @@ install-modules: modules + sh scripts/find-madwifi-modules.sh -r $(KERNELRELEASE) $(DESTDIR) + + for i in $(obj-y); do \ +- $(MAKE) -C $$i install || exit 1; \ ++ $(MAKE) -C $$i install TOP="$(TOP)" || exit 1; \ + done + ifeq ($(DESTDIR),) + (export KMODPATH=$(KMODPATH); /sbin/depmod -ae $(KERNELRELEASE)) +@@ -114,12 +114,21 @@ reinstall-tools: uninstall-tools install + reinstall-modules: uninstall-modules install-modules + + clean: +- for i in $(obj-y); do \ +- $(MAKE) -C $$i clean; \ +- done +- -$(MAKE) -C $(TOOLS) clean +- rm -rf .tmp_versions ++ -find $(obj-y) -name '*~' \ ++ -or -name '*.o' \ ++ -or -name '*.o.d' \ ++ -or -name '*.o.cmd' \ ++ -or -name '*.o.flags' \ ++ -or -name '*.ko' \ ++ -or -name '*.ko.cmd' \ ++ -or -name '*.mod.c' \ ++ -or -name '.depend' \ ++ -or -name '.version' \ ++ -or -name '.symvers' | \ ++ xargs -r rm -f + rm -f *.symvers svnversion.h ++ rm -rf .tmp_versions ++ make -C tools clean + + info: + @echo "The following settings will be used for compilation:" +@@ -135,18 +144,6 @@ info: + @echo "KMODPATH : $(KMODPATH)" + @echo "KMODSUF : $(KMODSUF)" + +-sanitycheck: +- @echo -n "Checking requirements... " +- +- @# check if specified rate control is available +- @if [ ! -d $(ATH_RATE) ]; then \ +- echo "FAILED"; \ +- echo "Selected rate control $(ATH_RATE) not available."; \ +- exit 1; \ +- fi +- +- @echo "ok." +- + .PHONY: release + release: + sh scripts/make-release.bash +@@ -155,7 +152,7 @@ release: + unload: + bash scripts/madwifi-unload + +-configcheck: sanitycheck ++configcheck: + @echo -n "Checking kernel configuration... " + + @# check version of kernel +--- a/Makefile.inc ++++ b/Makefile.inc +@@ -68,6 +68,9 @@ endif + export KERNELPATH + endif + ++# build net80211 and ath_ahb/ath_pci into a single module ++export SINGLE_MODULE=1 ++ + # KERNELRELEASE is the target kernel's version. It's always taken from + # the kernel build tree. Kernel Makefile doesn't always know the exact + # kernel version (especially for vendor stock kernels), so we get it +@@ -100,6 +103,7 @@ export ARCH + include $(TOP)/ath_hal/ah_target.inc + export TARGET + COPTS += -DTARGET='"$(TARGET)"' ++COPTS += -DCONFIG_ATHEROS_RATE_DEFAULT='"$(firstword $(ATH_RATE))"' + + # KMODPATH nominates the directory where the modules will be + # installed to +@@ -141,7 +145,7 @@ ATH= $(TOP)/ath + # + # Path to the rate control algorithms. + # +-ATH_RATE= $(TOP)/ath_rate ++ATH_RATE= minstrel + # + # Path to the userspace utilities. + # +--- a/ath_rate/sample/sample.c ++++ b/ath_rate/sample/sample.c +@@ -991,6 +991,8 @@ static struct ieee80211_rate_ops ath_rat + .dynamic_proc_register = ath_rate_dynamic_proc_register, + }; + ++#include ++ + MODULE_AUTHOR("John Bicket"); + MODULE_DESCRIPTION("SampleRate bit-rate selection algorithm for Atheros devices"); + #ifdef MODULE_VERSION +@@ -1000,18 +1002,17 @@ MODULE_VERSION(RELEASE_VERSION); + MODULE_LICENSE("Dual BSD/GPL"); + #endif + +-static int __init +-init_ath_rate_sample(void) ++static int __init ath_rate_sample_init(void) + { + printk(KERN_INFO "%s: %s\n", dev_info, version); + return ieee80211_rate_register(&ath_rate_ops); + } +-module_init(init_ath_rate_sample); ++module_init(ath_rate_sample_init); + + static void __exit +-exit_ath_rate_sample(void) ++ath_rate_sample_exit(void) + { + ieee80211_rate_unregister(&ath_rate_ops); + printk(KERN_INFO "%s: unloaded\n", dev_info); + } +-module_exit(exit_ath_rate_sample); ++module_exit(ath_rate_sample_exit); +--- a/net80211/if_media.h ++++ b/net80211/if_media.h +@@ -42,6 +42,7 @@ + #define _NET_IF_MEDIA_H_ + + #include ++#include "symbol.h" + + /* + * Prototypes and definitions for BSD/OS-compatible network interface +--- /dev/null ++++ b/net80211/symbol.h +@@ -0,0 +1,4 @@ ++#ifdef SINGLE_MODULE ++#undef EXPORT_SYMBOL ++#define EXPORT_SYMBOL(...) ++#endif +--- a/ath_rate/Makefile ++++ b/ath_rate/Makefile +@@ -1,7 +1,7 @@ + obj := $(firstword $(obj) $(SUBDIRS) .) + TOP = $(obj)/.. + +-obj-y := amrr/ onoe/ sample/ minstrel/ ++obj-y := sample/ minstrel/ + + include $(TOP)/Makefile.inc +