From: John Crispin Date: Mon, 28 Jul 2014 15:26:32 +0000 (+0000) Subject: ramips: fix mode switch gpio for AsiaRF AWM eval board X-Git-Tag: reboot~6390 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6f6dc62ca25ef1e4169a6c575e80594bf72e2ec8;p=openwrt%2Fstaging%2Fnoltari.git ramips: fix mode switch gpio for AsiaRF AWM eval board Fix a typo: gpio 21 is already used for the WPS led. Gpio 20 is the right one (tested) for the mode switch. Confirmed that /sys/kernel/debug/gpio state followed the position of the switch. Signed-off-by: Russell Senior SVN-Revision: 41858 --- diff --git a/target/linux/ramips/dts/AWM002-EVB-4M.dts b/target/linux/ramips/dts/AWM002-EVB-4M.dts index c483d2d290..0738f048ef 100644 --- a/target/linux/ramips/dts/AWM002-EVB-4M.dts +++ b/target/linux/ramips/dts/AWM002-EVB-4M.dts @@ -41,7 +41,7 @@ }; mode { label = "mode"; - gpios = <&gpio0 21 1>; + gpios = <&gpio0 20 1>; linux,code = <0x32>; }; }; diff --git a/target/linux/ramips/dts/AWM002-EVB-8M.dts b/target/linux/ramips/dts/AWM002-EVB-8M.dts index 01e1e26fd3..ebc4085588 100644 --- a/target/linux/ramips/dts/AWM002-EVB-8M.dts +++ b/target/linux/ramips/dts/AWM002-EVB-8M.dts @@ -41,7 +41,7 @@ }; mode { label = "mode"; - gpios = <&gpio0 21 1>; + gpios = <&gpio0 20 1>; linux,code = <0x32>; }; }; diff --git a/target/linux/ramips/dts/AWM003-EVB.dts b/target/linux/ramips/dts/AWM003-EVB.dts index 4227965add..35d4886762 100644 --- a/target/linux/ramips/dts/AWM003-EVB.dts +++ b/target/linux/ramips/dts/AWM003-EVB.dts @@ -56,7 +56,7 @@ }; mode { label = "mode"; - gpios = <&gpio0 21 1>; + gpios = <&gpio0 20 1>; linux,code = <0x32>; }; };