From: Steffen Loley Date: Sat, 10 Feb 2024 15:50:50 +0000 (+0100) Subject: ramips: add support for TP-Link RE205 v3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6e7bc0c24327502b6d0f0eaf8b23d6e4ff9b5a34;p=openwrt%2Fstaging%2Fstintel.git ramips: add support for TP-Link RE205 v3 TP-Link RE205 v3 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with external antennas. It's based on MediaTek MT7628AN+MT7610EN like the RE200 v3/v4 but with external antennas. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 5x LED (GPIO-controlled), 2x button - UART connection holes on PCB (57600 8n1) There are 2.4G and 5G LEDs in blue which are controlled separately. Installation ------------ Installation is identical to RE200 v3 devices as described at https://openwrt.org/toh/tp-link/re200#installation Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- U-Boot seems to be locked on newer versions, if not it can be accessed over the UART as described in the link above. Signed-off-by: Steffen Loley --- diff --git a/target/linux/ramips/dts/mt7628an_tplink_re205-v3.dts b/target/linux/ramips/dts/mt7628an_tplink_re205-v3.dts new file mode 100644 index 0000000000..f9390b1540 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_tplink_re205-v3.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_tplink_re200.dtsi" + +/ { + compatible = "tplink,re205-v3", "mediatek,mt7628an-soc"; + model = "TP-Link RE205 v3"; + + /delete-node/ leds; + + leds { + compatible = "gpio-leds"; + + led_power: power { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + + wifi5g { + function = LED_FUNCTION_WLAN_5GHZ; + color = ; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wifi2g { + function = LED_FUNCTION_WLAN_2GHZ; + color = ; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + signal_blue { + label = "blue:signal"; + gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + + signal_red { + label = "red:signal"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 656820be14..fc81266da9 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -636,6 +636,16 @@ define Device/tplink_re200-v4 endef TARGET_DEVICES += tplink_re200-v4 +define Device/tplink_re205-v3 + $(Device/tplink-safeloader) + IMAGE_SIZE := 7808k + DEVICE_MODEL := RE205 + DEVICE_VARIANT := v3 + DEVICE_PACKAGES := kmod-mt76x0e + TPLINK_BOARD_ID := RE205-V3 +endef +TARGET_DEVICES += tplink_re205-v3 + define Device/tplink_re220-v2 $(Device/tplink-safeloader) IMAGE_SIZE := 7808k diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 5a0e0ab214..da3ef154c0 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -91,6 +91,9 @@ tplink,tl-mr3020-v3|\ tplink,tl-wa801nd-v5) ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" ;; +tplink,re205-v3) + ucidef_set_led_netdev "lan" "lan" "blue:signal" "eth0" + ;; tplink,re365-v1) ucidef_set_led_netdev "lan" "lan" "blue:lan" "eth0" ;; diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 63abb14d13..fd8c086a85 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -24,6 +24,7 @@ ramips_setup_interfaces() tplink,re200-v2|\ tplink,re200-v3|\ tplink,re200-v4|\ + tplink,re205-v3|\ tplink,re220-v2|\ tplink,re305-v1|\ tplink,re305-v3|\