From: Johannes Berg Date: Thu, 22 Jun 2017 11:06:21 +0000 (+0200) Subject: iwlwifi: mvm: remove DQA non-STA client mode special case X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6e46496302df7e63158fa1476cf9a30d5ee59dee;p=openwrt%2Fstaging%2Fblogic.git iwlwifi: mvm: remove DQA non-STA client mode special case When we get a non-STA frame to transmit in client mode, we try to use the IWL_MVM_DQA_BSS_CLIENT_QUEUE queue (queue #4). However, at this point, the queue might not be allocated at all, causing warnings. The scenario on which this happened was a race condition between mac80211 and our queue allocation work: * mac80211 sends auth * we stop mac80211 queues to allocate a hw queue * authentication is aborted * we allocate HW queue and start mac80211 queues * mac80211 removes station * mac80211 hands us the auth frame from the pending queue At this point, since mac80211 has already removed the station, we try to transmit the frame through this special non-station case on queue 4 anyway. In order to really use it properly, we'd have to again go through the hw queue allocation work, and attach it to a station, etc. In this case that isn't possible (there's no station anymore), but if this special case were needed, then we'd have to do it this way. However, the special case is documented to exist for TDLS, but can't trigger there because the TDLS setup frames etc. are normal to-DS frames going to the peer through the AP. Testing also confirms that this code path isn't triggered in TDLS. Therefore, remove the code path to avoid using an unused queue. The erroneous frame described above will still be transmitted on the AUX queue, but arguably that's a mac80211 problem, which will eventually be fixed by moving everything there to TXQs. Fixes: e3118ad74d7e ("iwlwifi: mvm: support tdls in dqa mode") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 584ddc39d5f7..73967790f7e4 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -631,10 +631,6 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) * (this is not possible for unicast packets as a TLDS discovery * response are sent without a station entry); otherwise use the * AUX station. - * In DQA mode, if vif is of type STATION and frames are not multicast - * or offchannel, they should be sent from the BSS queue. - * For example, TDLS setup frames should be sent on this queue, - * as they go through the AP. */ sta_id = mvm->aux_sta.sta_id; if (info.control.vif) { @@ -655,10 +651,6 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) if (ap_sta_id != IWL_MVM_INVALID_STA) sta_id = ap_sta_id; - } else if (iwl_mvm_is_dqa_supported(mvm) && - info.control.vif->type == NL80211_IFTYPE_STATION && - queue != mvm->aux_queue) { - queue = IWL_MVM_DQA_BSS_CLIENT_QUEUE; } else if (iwl_mvm_is_dqa_supported(mvm) && info.control.vif->type == NL80211_IFTYPE_MONITOR) { queue = mvm->aux_queue;