From: Dominik Menke <dom@digineo.de>
Date: Tue, 15 Nov 2016 11:36:09 +0000 (+0100)
Subject: ramips: cleanup ZBT-WG3526.dtsi
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6e3d7897f75e77ccbee6fde318b88a826920f3b6;p=openwrt%2Fstaging%2Frobimarko.git

ramips: cleanup ZBT-WG3526.dtsi

- replace magic numbers with GPIO_* constants
- replace generic PCI definitions with correct vendor and
  device identification

Signed-off-by: Dominik Menke <dom@digineo.de>
---

diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 6e82d25398..1a4b9d6d21 100644
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -1,5 +1,6 @@
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
@@ -26,7 +27,7 @@
 
 		reset {
 			label = "reset";
-			gpios = <&gpio0 18 1>;
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 	};
@@ -52,7 +53,6 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		linux,modalias = "m25p80";
 		spi-max-frequency = <10000000>;
 
 		partition@0 {
@@ -83,18 +83,18 @@
 	status = "okay";
 
 	pcie0 {
-		mt76@0,0 {
+		wifi@14c3,7603 {
+			compatible = "pci14c3,7603";
 			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
 			mediatek,mtd-eeprom = <&factory 0x0000>;
 			mediatek,5ghz = <0>;
 		};
 	};
 
 	pcie1 {
-		mt76@1,0 {
+		wifi@14c3,7662 {
+			compatible = "pci14c3,7662";
 			reg = <0x0000 0 0 0 0>;
-			device_type = "pci";
 			mediatek,mtd-eeprom = <&factory 0x8000>;
 			mediatek,2ghz = <0>;
 		};