From: Jason Wessel Date: Fri, 21 May 2010 02:04:23 +0000 (-0500) Subject: sparc,sunzilog: Add console polling support for sunzilog serial driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6d45a1aed34b0cd7b298967eb9cb72b77afcb33b;p=openwrt%2Fstaging%2Fblogic.git sparc,sunzilog: Add console polling support for sunzilog serial driver Allow kgdboc to work on sparc hardware with the Zilog serial chips. Signed-off-by: Jason Wessel Acked-by: David S. Miller --- diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 2c7a66af4f52..978b3cee02d7 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -102,6 +102,8 @@ struct uart_sunzilog_port { #endif }; +static void sunzilog_putchar(struct uart_port *port, int ch); + #define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase)) #define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT)) @@ -996,6 +998,50 @@ static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *se return -EINVAL; } +#ifdef CONFIG_CONSOLE_POLL +static int sunzilog_get_poll_char(struct uart_port *port) +{ + unsigned char ch, r1; + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port; + struct zilog_channel __iomem *channel + = ZILOG_CHANNEL_FROM_PORT(&up->port); + + + r1 = read_zsreg(channel, R1); + if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) { + writeb(ERR_RES, &channel->control); + ZSDELAY(); + ZS_WSYNC(channel); + } + + ch = readb(&channel->control); + ZSDELAY(); + + /* This funny hack depends upon BRK_ABRT not interfering + * with the other bits we care about in R1. + */ + if (ch & BRK_ABRT) + r1 |= BRK_ABRT; + + if (!(ch & Rx_CH_AV)) + return NO_POLL_CHAR; + + ch = readb(&channel->data); + ZSDELAY(); + + ch &= up->parity_mask; + return ch; +} + +static void sunzilog_put_poll_char(struct uart_port *port, + unsigned char ch) +{ + struct uart_sunzilog_port *up = (struct uart_sunzilog_port *)port; + + sunzilog_putchar(&up->port, ch); +} +#endif /* CONFIG_CONSOLE_POLL */ + static struct uart_ops sunzilog_pops = { .tx_empty = sunzilog_tx_empty, .set_mctrl = sunzilog_set_mctrl, @@ -1013,6 +1059,10 @@ static struct uart_ops sunzilog_pops = { .request_port = sunzilog_request_port, .config_port = sunzilog_config_port, .verify_port = sunzilog_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = sunzilog_get_poll_char, + .poll_put_char = sunzilog_put_poll_char, +#endif }; static int uart_chip_count;