From: John Crispin Date: Fri, 13 Jun 2014 09:16:15 +0000 (+0000) Subject: ramips: add asiarf awapn2403 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6d213a644d61166c3991fafede3c9e36dffbdf1d;p=openwrt%2Fstaging%2Frobimarko.git ramips: add asiarf awapn2403 support Signed-off-by: John Crispin SVN-Revision: 41177 --- diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index f9b4168245..14d630edcf 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -15,6 +15,9 @@ get_status_led() { ar725w) status_led="ar725w:green:power" ;; + awapn2403) + status_led="asiarf:green:wps" + ;; argus-atp52b) status_led="argus-atp52b:green:run" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index b57bfd82ae..904afd1a41 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -64,6 +64,7 @@ case "$FIRMWARE" in all5003 | \ argus-atp52b | \ awm002-evb | \ + awapn2403 | \ bc2 | \ br6425 | \ br-6475nd | \ diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index 23c24515e2..c5e380cbc6 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -35,6 +35,9 @@ case $board in ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8" set_wifi_led "rt2800pci-phy0::radio" ;; + awapn2403) + set_wifi_led "rt2800soc-phy0::radio" + ;; ar725w) set_wifi_led "rt2800soc-phy0::radio" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 02a4da9d3a..0c3daff960 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -64,6 +64,13 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ;; + awapn2403) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "0 6t" + ucidef_add_switch_vlan "switch0" "2" "1 6t" + ;; + br-6475nd) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index f9732f8eeb..5d897fc521 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -55,6 +55,9 @@ ramips_board_detect() { *"AsiaRF AWM002 EVB") name="awm002-evb" ;; + *"AsiaRF AWAPN2403") + name="awapn2403" + ;; *"BR6524N") name="br6524n" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 190de9fbf1..a39c433e8f 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -26,6 +26,7 @@ platform_check_image() { ar725w | \ asl26555 | \ awm002-evb | \ + awapn2403 | \ bc2 | \ broadway | \ carambola | \ diff --git a/target/linux/ramips/dts/AWAPN2403.dts b/target/linux/ramips/dts/AWAPN2403.dts new file mode 100644 index 0000000000..068c8005b2 --- /dev/null +++ b/target/linux/ramips/dts/AWAPN2403.dts @@ -0,0 +1,78 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "AWAPN2403", "ralink,rt3052-soc"; + model = "AsiaRF AWAPN2403"; + + palmbus@10000000 { + spi@b00 { + status = "okay"; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l3205d"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + esw@10110000 { + ralink,portmap = <0x3e>; + }; + + gpio-leds { + compatible = "gpio-leds"; + link { + label = "asiarf:green:wps"; + gpios = <&gpio0 14 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 0 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 3b813d8be5..58a54773c2 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -348,6 +348,7 @@ endef Image/Build/Profile/ASL26555=$(call BuildFirmware/ASL26555/$(1),$(1),asl26555,ASL26555) Image/Build/Profile/AWM002EVB=$(call BuildFirmware/DefaultDualSize/$(1),$(1),awm002-evb,AWM002-EVB) +Image/Build/Profile/AWAPN2403=$(call BuildFirmware/Default4M/$(1),$(1),awmapn2403,AWAPN2403) Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2) @@ -562,6 +563,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/ASL26555,$(1)) $(call Image/Build/Profile/AWM002EVB,$(1)) + $(call Image/Build/Profile/AWAPN2403,$(1)) $(call Image/Build/Profile/BC2,$(1)) $(call Image/Build/Profile/BROADWAY,$(1)) $(call Image/Build/Profile/CARAMBOLA,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/asiarf.mk b/target/linux/ramips/rt305x/profiles/asiarf.mk index 8b1f75700b..2d5231d08e 100644 --- a/target/linux/ramips/rt305x/profiles/asiarf.mk +++ b/target/linux/ramips/rt305x/profiles/asiarf.mk @@ -1,18 +1,16 @@ # -# Copyright (C) 2012 OpenWrt.org +# Copyright (C) 2014 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. # -define Profile/AWM002EVB - NAME:=AsiaRF AWM002-EVB - PACKAGES:=kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \ - kmod-i2c-core kmod-i2c-gpio +define Profile/AWAPN2403 + NAME:=AisaRF AWAPN2403 endef -define Profile/AWM002EVB/Description - Package set for AsiaRF AWM002 Evaluation Board +define Profile/AWAPN2403/Description + Package set for Allnet ALL0239-3G endef -$(eval $(call Profile,AWM002EVB)) +$(eval $(call Profile,AWAPN2403))