From: Patrick Gefre Date: Sun, 1 May 2005 15:59:21 +0000 (-0700) Subject: [PATCH] Altix ioc4 serial - set a better timeout/threshold X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6cb2875f8d7e392982229094ad3b6d2f213f48da;p=openwrt%2Fstaging%2Fblogic.git [PATCH] Altix ioc4 serial - set a better timeout/threshold Set the timeout and threshold to better values. Signed-off-by: Patrick Gefre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c index f94d2e712cad..d3f4542616c6 100644 --- a/drivers/serial/ioc4_serial.c +++ b/drivers/serial/ioc4_serial.c @@ -1272,8 +1272,9 @@ static inline int set_rx_timeout(struct ioc4_port *port, int timeout) * and set the rx threshold to that amount. There are 4 chars * per ring entry, so we'll divide the number of chars that will * arrive in timeout by 4. + * So .... timeout * baud / 10 / HZ / 4, with HZ = 100. */ - threshold = timeout * port->ip_baud / 10 / HZ / 4; + threshold = timeout * port->ip_baud / 4000; if (threshold == 0) threshold = 1; /* otherwise we'll intr all the time! */ @@ -1285,8 +1286,10 @@ static inline int set_rx_timeout(struct ioc4_port *port, int timeout) writel(port->ip_sscr, &port->ip_serial_regs->sscr); - /* Now set the rx timeout to the given value */ - timeout = timeout * IOC4_SRTR_HZ / HZ; + /* Now set the rx timeout to the given value + * again timeout * IOC4_SRTR_HZ / HZ + */ + timeout = timeout * IOC4_SRTR_HZ / 100; if (timeout > IOC4_SRTR_CNT) timeout = IOC4_SRTR_CNT; @@ -1380,7 +1383,7 @@ config_port(struct ioc4_port *port, if (port->ip_tx_lowat == 0) port->ip_tx_lowat = 1; - set_rx_timeout(port, port->ip_rx_timeout); + set_rx_timeout(port, 2); return 0; }