From: Nick Hainke Date: Wed, 24 Apr 2024 05:19:30 +0000 (+0200) Subject: oxnas: drop target X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6ca830559865f994db8732a9d06f452e36d5b490;p=openwrt%2Fstaging%2Fxback.git oxnas: drop target The Upstream Linux community has discontinued support for the target. Maintaining support for it downstream would require too much effort. Moreover, it seems that the supported hardware is no longer deemed worthy of it. Signed-off-by: Nick Hainke --- diff --git a/.github/labeler.yml b/.github/labeler.yml index 5cbf2ac987..fd26dd7f38 100644 --- a/.github/labeler.yml +++ b/.github/labeler.yml @@ -82,9 +82,6 @@ "target/omap": - "target/linux/omap/**" - "package/boot/uboot-omap/**" -"target/oxnas": - - "target/linux/oxnas/**" - - "package/boot/uboot-oxnas/**" "target/pistachio": - "target/linux/pistachio/**" "target/qoriq": diff --git a/package/boot/uboot-oxnas/Makefile b/package/boot/uboot-oxnas/Makefile deleted file mode 100644 index fc06f01dcb..0000000000 --- a/package/boot/uboot-oxnas/Makefile +++ /dev/null @@ -1,36 +0,0 @@ -# -# Copyright (C) 2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_VERSION:=2014.10 -PKG_RELEASE:=16 - -PKG_HASH:=d3b132a7a9b3f3182b7aad71c2dfbd4fc15bea83e12c76134eb3ffefc07d1c71 - -include $(INCLUDE_DIR)/u-boot.mk -include $(INCLUDE_DIR)/package.mk - -define U-Boot/Default - BUILD_TARGET:=oxnas - BUILD_DEVICES:=Default - HIDDEN:=y -endef - -define U-Boot/ox820 - NAME:=Oxford/PLX NAS7820 -endef - -UBOOT_TARGETS:=ox820 - -define Build/InstallDev - $(INSTALL_DIR) $(STAGING_DIR_IMAGE) - $(CP) $(PKG_BUILD_DIR)/u-boot.bin $(STAGING_DIR_IMAGE)/u-boot.bin -endef - -$(eval $(call BuildPackage/U-Boot)) diff --git a/package/boot/uboot-oxnas/patches/010-capacity-is-unsigned.patch b/package/boot/uboot-oxnas/patches/010-capacity-is-unsigned.patch deleted file mode 100644 index 443b5e28a2..0000000000 --- a/package/boot/uboot-oxnas/patches/010-capacity-is-unsigned.patch +++ /dev/null @@ -1,37 +0,0 @@ -From df9fb90120423c4c55b66a5dc09af23f605a406b Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 1 Dec 2014 21:37:25 +0100 -Subject: [PATCH] disk/part.c: use unsigned format when printing capacity -To: u-boot@lists.denx.de - -Large disks otherwise produce highly unplausible output such as - Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512) - -As supposedly all size-related decimals are unsigned, use unsigned -format in printf statement, resulting in a correct capacity being -displayed: - Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512) - -Signed-off-by: Daniel Golle ---- - disk/part.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/disk/part.c -+++ b/disk/part.c -@@ -229,13 +229,13 @@ void dev_print (block_dev_desc_t *dev_de - printf (" Supports 48-bit addressing\n"); - #endif - #if defined(CONFIG_SYS_64BIT_LBA) -- printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n", -+ printf (" Capacity: %lu.%lu MB = %lu.%lu GB (%Lu x %lu)\n", - mb_quot, mb_rem, - gb_quot, gb_rem, - lba, - dev_desc->blksz); - #else -- printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n", -+ printf (" Capacity: %lu.%lu MB = %lu.%lu GB (%lu x %lu)\n", - mb_quot, mb_rem, - gb_quot, gb_rem, - (ulong)lba, diff --git a/package/boot/uboot-oxnas/patches/020-socfpgaimage_portability.patch b/package/boot/uboot-oxnas/patches/020-socfpgaimage_portability.patch deleted file mode 100644 index e273c275d0..0000000000 --- a/package/boot/uboot-oxnas/patches/020-socfpgaimage_portability.patch +++ /dev/null @@ -1,52 +0,0 @@ ---- a/tools/socfpgaimage.c -+++ b/tools/socfpgaimage.c -@@ -74,12 +74,12 @@ static uint16_t hdr_checksum(struct socf - static void build_header(uint8_t *buf, uint8_t version, uint8_t flags, - uint16_t length_bytes) - { -- header.validation = htole32(VALIDATION_WORD); -+ header.validation = cpu_to_le32(VALIDATION_WORD); - header.version = version; - header.flags = flags; -- header.length_u32 = htole16(length_bytes/4); -+ header.length_u32 = cpu_to_le16(length_bytes/4); - header.zero = 0; -- header.checksum = htole16(hdr_checksum(&header)); -+ header.checksum = cpu_to_le16(hdr_checksum(&header)); - - memcpy(buf, &header, sizeof(header)); - } -@@ -92,12 +92,12 @@ static int verify_header(const uint8_t * - { - memcpy(&header, buf, sizeof(header)); - -- if (le32toh(header.validation) != VALIDATION_WORD) -+ if (le32_to_cpu(header.validation) != VALIDATION_WORD) - return -1; -- if (le16toh(header.checksum) != hdr_checksum(&header)) -+ if (le16_to_cpu(header.checksum) != hdr_checksum(&header)) - return -1; - -- return le16toh(header.length_u32) * 4; -+ return le16_to_cpu(header.length_u32) * 4; - } - - /* Sign the buffer and return the signed buffer size */ -@@ -116,7 +116,7 @@ static int sign_buffer(uint8_t *buf, - /* Calculate and apply the CRC */ - calc_crc = ~pbl_crc32(0, (char *)buf, len); - -- *((uint32_t *)(buf + len)) = htole32(calc_crc); -+ *((uint32_t *)(buf + len)) = cpu_to_le32(calc_crc); - - if (!pad_64k) - return len + 4; -@@ -150,7 +150,7 @@ static int verify_buffer(const uint8_t * - - calc_crc = ~pbl_crc32(0, (const char *)buf, len); - -- buf_crc = le32toh(*((uint32_t *)(buf + len))); -+ buf_crc = le32_to_cpu(*((uint32_t *)(buf + len))); - - if (buf_crc != calc_crc) { - fprintf(stderr, "CRC32 does not match (%08x != %08x)\n", diff --git a/package/boot/uboot-oxnas/patches/150-spl-block.patch b/package/boot/uboot-oxnas/patches/150-spl-block.patch deleted file mode 100644 index 5d76084859..0000000000 --- a/package/boot/uboot-oxnas/patches/150-spl-block.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/common/spl/Makefile -+++ b/common/spl/Makefile -@@ -19,4 +19,5 @@ obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc - obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o - obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o - obj-$(CONFIG_SPL_SATA_SUPPORT) += spl_sata.o -+obj-$(CONFIG_SPL_BLOCK_SUPPORT) += spl_block.o - endif ---- a/common/spl/spl.c -+++ b/common/spl/spl.c -@@ -191,6 +191,14 @@ void board_init_r(gd_t *dummy1, ulong du - spl_spi_load_image(); - break; - #endif -+#ifdef CONFIG_SPL_BLOCK_SUPPORT -+ case BOOT_DEVICE_BLOCK: -+ { -+ extern void spl_block_load_image(void); -+ spl_block_load_image(); -+ break; -+ } -+#endif - #ifdef CONFIG_SPL_ETH_SUPPORT - case BOOT_DEVICE_CPGMAC: - #ifdef CONFIG_SPL_ETH_DEVICE ---- a/common/cmd_nvedit.c -+++ b/common/cmd_nvedit.c -@@ -49,6 +49,7 @@ DECLARE_GLOBAL_DATA_PTR; - !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ - !defined(CONFIG_ENV_IS_IN_REMOTE) && \ - !defined(CONFIG_ENV_IS_IN_UBI) && \ -+ !defined(CONFIG_ENV_IS_IN_EXT4) && \ - !defined(CONFIG_ENV_IS_NOWHERE) - # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\ - SPI_FLASH|NVRAM|MMC|FAT|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE ---- a/common/Makefile -+++ b/common/Makefile -@@ -63,6 +63,7 @@ obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_o - obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o - obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o - obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o -+obj-$(CONFIG_ENV_IS_IN_EXT4) += env_ext4.o - obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o - - # command -@@ -213,6 +214,8 @@ obj-$(CONFIG_UPDATE_TFTP) += update.o - obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o - obj-$(CONFIG_CMD_DFU) += cmd_dfu.o - obj-$(CONFIG_CMD_GPT) += cmd_gpt.o -+else -+obj-$(CONFIG_SPL_BLOCK_SUPPORT) += cmd_ide.o - endif - - ifdef CONFIG_SPL_BUILD diff --git a/package/boot/uboot-oxnas/patches/200-icplus-phy.patch b/package/boot/uboot-oxnas/patches/200-icplus-phy.patch deleted file mode 100644 index b378331277..0000000000 --- a/package/boot/uboot-oxnas/patches/200-icplus-phy.patch +++ /dev/null @@ -1,142 +0,0 @@ -From e719404ee1241af679a51879eaad291bc27e4817 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 2 Dec 2014 14:46:05 +0100 -Subject: [PATCH] net/phy: add back icplus driver - -IC+ phy driver was removed due to the lack of users some time ago. -Add it back, so we can use it. ---- - drivers/net/phy/Makefile | 1 + - drivers/net/phy/icplus.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++++ - drivers/net/phy/phy.c | 3 ++ - 3 files changed, 84 insertions(+) - create mode 100644 drivers/net/phy/icplus.c - ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_PHY_ATHEROS) += atheros.o - obj-$(CONFIG_PHY_BROADCOM) += broadcom.o - obj-$(CONFIG_PHY_DAVICOM) += davicom.o - obj-$(CONFIG_PHY_ET1011C) += et1011c.o -+obj-$(CONFIG_PHY_ICPLUS) += icplus.o - obj-$(CONFIG_PHY_LXT) += lxt.o - obj-$(CONFIG_PHY_MARVELL) += marvell.o - obj-$(CONFIG_PHY_MICREL) += micrel.o ---- /dev/null -+++ b/drivers/net/phy/icplus.c -@@ -0,0 +1,93 @@ -+/* -+ * ICPlus PHY drivers -+ * -+ * SPDX-License-Identifier: GPL-2.0+ -+ * -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ */ -+#include -+ -+/* IP101A/G - IP1001 */ -+#define IP10XX_SPEC_CTRL_STATUS 16 /* Spec. Control Register */ -+#define IP1001_SPEC_CTRL_STATUS_2 20 /* IP1001 Spec. Control Reg 2 */ -+#define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ -+#define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ -+#define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ -+#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ -+#define IP101A_G_IRQ_PIN_USED (1<<15) /* INTR pin used */ -+#define IP101A_G_IRQ_DEFAULT IP101A_G_IRQ_PIN_USED -+#define IP1001LF_DRIVE_MASK (15 << 5) -+#define IP1001LF_RXCLKDRIVE_HI (2 << 5) -+#define IP1001LF_RXDDRIVE_HI (2 << 7) -+#define IP1001LF_RXCLKDRIVE_M (1 << 5) -+#define IP1001LF_RXDDRIVE_M (1 << 7) -+#define IP1001LF_RXCLKDRIVE_L (0 << 5) -+#define IP1001LF_RXDDRIVE_L (0 << 7) -+#define IP1001LF_RXCLKDRIVE_VL (3 << 5) -+#define IP1001LF_RXDDRIVE_VL (3 << 7) -+ -+static int ip1001_config(struct phy_device *phydev) -+{ -+ int c; -+ -+ /* Enable Auto Power Saving mode */ -+ c = phy_read(phydev, MDIO_DEVAD_NONE, IP1001_SPEC_CTRL_STATUS_2); -+ if (c < 0) -+ return c; -+ c |= IP1001_APS_ON; -+ c = phy_write(phydev, MDIO_DEVAD_NONE, IP1001_SPEC_CTRL_STATUS_2, c); -+ if (c < 0) -+ return c; -+ -+ /* INTR pin used: speed/link/duplex will cause an interrupt */ -+ c = phy_write(phydev, MDIO_DEVAD_NONE, IP101A_G_IRQ_CONF_STATUS, -+ IP101A_G_IRQ_DEFAULT); -+ if (c < 0) -+ return c; -+ -+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII) { -+ /* -+ * Additional delay (2ns) used to adjust RX clock phase -+ * at RGMII interface -+ */ -+ c = phy_read(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS); -+ if (c < 0) -+ return c; -+ -+ c |= IP1001_PHASE_SEL_MASK; -+ /* adjust digtial drive strength */ -+ c &= ~IP1001LF_DRIVE_MASK; -+ c |= IP1001LF_RXCLKDRIVE_M; -+ c |= IP1001LF_RXDDRIVE_M; -+ c = phy_write(phydev, MDIO_DEVAD_NONE, IP10XX_SPEC_CTRL_STATUS, -+ c); -+ if (c < 0) -+ return c; -+ } -+ -+ return 0; -+} -+ -+static int ip1001_startup(struct phy_device *phydev) -+{ -+ genphy_update_link(phydev); -+ genphy_parse_link(phydev); -+ -+ return 0; -+} -+static struct phy_driver IP1001_driver = { -+ .name = "ICPlus IP1001", -+ .uid = 0x02430d90, -+ .mask = 0x0ffffff0, -+ .features = PHY_GBIT_FEATURES, -+ .config = &ip1001_config, -+ .startup = &ip1001_startup, -+ .shutdown = &genphy_shutdown, -+}; -+ -+int phy_icplus_init(void) -+{ -+ phy_register(&IP1001_driver); -+ -+ return 0; -+} ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -454,6 +454,9 @@ int phy_init(void) - #ifdef CONFIG_PHY_ET1011C - phy_et1011c_init(); - #endif -+#ifdef CONFIG_PHY_ICPLUS -+ phy_icplus_init(); -+#endif - #ifdef CONFIG_PHY_LXT - phy_lxt_init(); - #endif ---- a/include/phy.h -+++ b/include/phy.h -@@ -225,6 +225,7 @@ int phy_atheros_init(void); - int phy_broadcom_init(void); - int phy_davicom_init(void); - int phy_et1011c_init(void); -+int phy_icplus_init(void); - int phy_lxt_init(void); - int phy_marvell_init(void); - int phy_micrel_init(void); diff --git a/package/boot/uboot-oxnas/patches/300-oxnas-target.patch b/package/boot/uboot-oxnas/patches/300-oxnas-target.patch deleted file mode 100644 index e677bd21d2..0000000000 --- a/package/boot/uboot-oxnas/patches/300-oxnas-target.patch +++ /dev/null @@ -1,101 +0,0 @@ ---- a/arch/arm/include/asm/mach-types.h -+++ b/arch/arm/include/asm/mach-types.h -@@ -212,6 +212,7 @@ extern unsigned int __machine_arch_type; - #define MACH_TYPE_EDB9307A 1128 - #define MACH_TYPE_OMAP_3430SDP 1138 - #define MACH_TYPE_VSTMS 1140 -+#define MACH_TYPE_OXNAS 1152 - #define MACH_TYPE_MICRO9M 1169 - #define MACH_TYPE_BUG 1179 - #define MACH_TYPE_AT91SAM9263EK 1202 ---- a/drivers/block/Makefile -+++ b/drivers/block/Makefile -@@ -21,3 +21,4 @@ obj-$(CONFIG_IDE_SIL680) += sil680.o - obj-$(CONFIG_SANDBOX) += sandbox.o - obj-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o - obj-$(CONFIG_SYSTEMACE) += systemace.o -+obj-$(CONFIG_IDE_PLX) += plxsata_ide.o ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o - obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o - obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o - obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o -+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o - obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o - obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o - obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o ---- a/tools/.gitignore -+++ b/tools/.gitignore -@@ -9,6 +9,7 @@ - /mkenvimage - /mkimage - /mkexynosspl -+/mkox820crc - /mpc86x_clk - /mxsboot - /mksunxiboot ---- a/tools/Makefile -+++ b/tools/Makefile -@@ -143,6 +143,12 @@ hostprogs-$(CONFIG_KIRKWOOD) += kwboot - hostprogs-y += proftool - hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela - -+ -+hostprogs-$(CONFIG_OX820) += mkox820crc$(SFX) -+ -+mkox820crc$(SFX)-objs := mkox820crc.o lib/crc32.o -+ -+ - # We build some files with extra pedantic flags to try to minimize things - # that won't build on some weird host compiler -- though there are lots of - # exceptions for files that aren't complaint. ---- a/drivers/serial/ns16550.c -+++ b/drivers/serial/ns16550.c -@@ -118,6 +118,14 @@ int ns16550_calc_divisor(NS16550_t port, - } - port->osc_12m_sel = 0; /* clear if previsouly set */ - #endif -+#ifdef CONFIG_OX820 -+ { -+ /* with additional 3 bit fractional */ -+ u32 div = (CONFIG_SYS_NS16550_CLK + baudrate) / (baudrate * 2); -+ port->reg9 = (div & 7) << 5; -+ return (div >> 3); -+ } -+#endif - - return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); - } ---- a/scripts/Makefile.spl -+++ b/scripts/Makefile.spl -@@ -202,6 +202,9 @@ OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJC - - $(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE - $(call if_changed,objcopy) -+ifdef CONFIG_OX820 -+ $(OBJTREE)/tools/mkox820crc $@ -+endif - - LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL) - ifneq ($(CONFIG_SPL_TEXT_BASE),) ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -488,6 +488,9 @@ config TARGET_BALLOON3 - config TARGET_H2200 - bool "Support h2200" - -+config TARGET_OX820 -+ bool "Support ox820" -+ - config TARGET_PALMLD - bool "Support palmld" - -@@ -650,6 +653,7 @@ source "board/logicpd/imx27lite/Kconfig" - source "board/logicpd/imx31_litekit/Kconfig" - source "board/mpl/vcma9/Kconfig" - source "board/olimex/mx23_olinuxino/Kconfig" -+source "board/ox820/Kconfig" - source "board/palmld/Kconfig" - source "board/palmtc/Kconfig" - source "board/palmtreo680/Kconfig" diff --git a/package/boot/uboot-oxnas/patches/400-gcc-5-compiler.patch b/package/boot/uboot-oxnas/patches/400-gcc-5-compiler.patch deleted file mode 100644 index 8724927402..0000000000 --- a/package/boot/uboot-oxnas/patches/400-gcc-5-compiler.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Hans de Goede -Date: Sat, 7 Feb 2015 21:52:40 +0000 (+0100) -Subject: Add linux/compiler-gcc5.h to fix builds with gcc5 -X-Git-Tag: v2015.04-rc2~31 -X-Git-Url: http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=478b02f1a7043b673565075ea5016376f3293b23 - -Add linux/compiler-gcc5.h to fix builds with gcc5 - -Add linux/compiler-gcc5/h from the kernel sources at: - -commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b -Author: Steven Noonan -Date: Sat Oct 25 15:09:42 2014 -0700 - - compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles - -Signed-off-by: Hans de Goede ---- - ---- /dev/null -+++ b/include/linux/compiler-gcc5.h -@@ -0,0 +1,65 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include directly, include instead." -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __must_check __attribute__((warn_unused_result)) -+#define __compiler_offsetof(a, b) __builtin_offsetof(a, b) -+ -+/* Mark functions as cold. gcc will assume any path leading to a call -+ to them will be unlikely. This means a lot of manual unlikely()s -+ are unnecessary now for any paths leading to the usual suspects -+ like BUG(), printk(), panic() etc. [but let's keep them for now for -+ older compilers] -+ -+ Early snapshots of gcc 4.3 don't support this and we can't detect this -+ in the preprocessor, but we can live with this because they're unreleased. -+ Maketime probing would be overkill here. -+ -+ gcc also has a __attribute__((__hot__)) to move hot functions into -+ a special section, but I don't see any sense in this right now in -+ the kernel context */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+ -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__)) -+ -+/* -+ * Tell the optimizer that something else uses this function or variable. -+ */ -+#define __visible __attribute__((externally_visible)) -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ diff --git a/package/boot/uboot-oxnas/patches/410-gcc-6-compiler.patch b/package/boot/uboot-oxnas/patches/410-gcc-6-compiler.patch deleted file mode 100644 index 00d0657bd6..0000000000 --- a/package/boot/uboot-oxnas/patches/410-gcc-6-compiler.patch +++ /dev/null @@ -1,306 +0,0 @@ -From: Hans de Goede -Date: Sat, 7 Feb 2015 21:52:40 +0000 (+0100) -Subject: Add linux/compiler-gcc6.h to fix builds with gcc6 -X-Git-Tag: v2015.04-rc2~31 -X-Git-Url: http://git.denx.de/?p=u-boot.git;a=commitdiff_plain;h=478b02f1a7043b673565075ea5016376f3293b23 - -Add linux/compiler-gcc6.h to fix builds with gcc6 - -Add linux/compiler-gcc6/h from the kernel sources at: - -commit 5631b8fba640a4ab2f8a954f63a603fa34eda96b -Author: Steven Noonan -Date: Sat Oct 25 15:09:42 2014 -0700 - - compiler/gcc4+: Remove inaccurate comment about 'asm goto' miscompiles - -Signed-off-by: Hans de Goede ---- - ---- /dev/null -+++ b/include/linux/compiler-gcc6.h -@@ -0,0 +1,284 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include directly, include instead." -+#endif -+ -+/* -+ * Common definitions for all gcc versions go here. -+ */ -+#define GCC_VERSION (__GNUC__ * 10000 \ -+ + __GNUC_MINOR__ * 100 \ -+ + __GNUC_PATCHLEVEL__) -+ -+/* Optimization barrier */ -+ -+/* The "volatile" is due to gcc bugs */ -+#define barrier() __asm__ __volatile__("": : :"memory") -+/* -+ * This version is i.e. to prevent dead stores elimination on @ptr -+ * where gcc and llvm may behave differently when otherwise using -+ * normal barrier(): while gcc behavior gets along with a normal -+ * barrier(), llvm needs an explicit input variable to be assumed -+ * clobbered. The issue is as follows: while the inline asm might -+ * access any memory it wants, the compiler could have fit all of -+ * @ptr into memory registers instead, and since @ptr never escaped -+ * from that, it proofed that the inline asm wasn't touching any of -+ * it. This version works well with both compilers, i.e. we're telling -+ * the compiler that the inline asm absolutely may see the contents -+ * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 -+ */ -+#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") -+ -+/* -+ * This macro obfuscates arithmetic on a variable address so that gcc -+ * shouldn't recognize the original var, and make assumptions about it. -+ * -+ * This is needed because the C standard makes it undefined to do -+ * pointer arithmetic on "objects" outside their boundaries and the -+ * gcc optimizers assume this is the case. In particular they -+ * assume such arithmetic does not wrap. -+ * -+ * A miscompilation has been observed because of this on PPC. -+ * To work around it we hide the relationship of the pointer and the object -+ * using this macro. -+ * -+ * Versions of the ppc64 compiler before 4.1 had a bug where use of -+ * RELOC_HIDE could trash r30. The bug can be worked around by changing -+ * the inline assembly constraint from =g to =r, in this particular -+ * case either is valid. -+ */ -+#define RELOC_HIDE(ptr, off) \ -+({ \ -+ unsigned long __ptr; \ -+ __asm__ ("" : "=r"(__ptr) : "0"(ptr)); \ -+ (typeof(ptr)) (__ptr + (off)); \ -+}) -+ -+/* Make the optimizer believe the variable can be manipulated arbitrarily. */ -+#define OPTIMIZER_HIDE_VAR(var) \ -+ __asm__ ("" : "=r" (var) : "0" (var)) -+ -+#ifdef __CHECKER__ -+#define __must_be_array(a) 0 -+#else -+/* &a[0] degrades to a pointer: a different type from an array */ -+#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) -+#endif -+ -+/* -+ * Force always-inline if the user requests it so via the .config, -+ * or if gcc is too old: -+ */ -+#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ -+ !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) -+#define inline inline __attribute__((always_inline)) notrace -+#define __inline__ __inline__ __attribute__((always_inline)) notrace -+#define __inline __inline __attribute__((always_inline)) notrace -+#else -+/* A lot of inline functions can cause havoc with function tracing */ -+#define inline inline notrace -+#define __inline__ __inline__ notrace -+#define __inline __inline notrace -+#endif -+ -+#define __always_inline inline __attribute__((always_inline)) -+#define noinline __attribute__((noinline)) -+ -+#define __deprecated __attribute__((deprecated)) -+#define __packed __attribute__((packed)) -+#define __weak __attribute__((weak)) -+#define __alias(symbol) __attribute__((alias(#symbol))) -+ -+/* -+ * it doesn't make sense on ARM (currently the only user of __naked) -+ * to trace naked functions because then mcount is called without -+ * stack and frame pointer being set up and there is no chance to -+ * restore the lr register to the value before mcount was called. -+ * -+ * The asm() bodies of naked functions often depend on standard calling -+ * conventions, therefore they must be noinline and noclone. -+ * -+ * GCC 4.[56] currently fail to enforce this, so we must do so ourselves. -+ * See GCC PR44290. -+ */ -+#define __naked __attribute__((naked)) noinline __noclone notrace -+ -+#define __noreturn __attribute__((noreturn)) -+ -+/* -+ * From the GCC manual: -+ * -+ * Many functions have no effects except the return value and their -+ * return value depends only on the parameters and/or global -+ * variables. Such a function can be subject to common subexpression -+ * elimination and loop optimization just as an arithmetic operator -+ * would be. -+ * [...] -+ */ -+#define __pure __attribute__((pure)) -+#define __aligned(x) __attribute__((aligned(x))) -+#define __printf(a, b) __attribute__((format(printf, a, b))) -+#define __scanf(a, b) __attribute__((format(scanf, a, b))) -+#define __attribute_const__ __attribute__((__const__)) -+#define __maybe_unused __attribute__((unused)) -+#define __always_unused __attribute__((unused)) -+ -+/* gcc version specific checks */ -+ -+#if GCC_VERSION < 30200 -+# error Sorry, your compiler is too old - please upgrade it. -+#endif -+ -+#if GCC_VERSION < 30300 -+# define __used __attribute__((__unused__)) -+#else -+# define __used __attribute__((__used__)) -+#endif -+ -+#ifdef CONFIG_GCOV_KERNEL -+# if GCC_VERSION < 30400 -+# error "GCOV profiling support for gcc versions below 3.4 not included" -+# endif /* __GNUC_MINOR__ */ -+#endif /* CONFIG_GCOV_KERNEL */ -+ -+#if GCC_VERSION >= 30400 -+#define __must_check __attribute__((warn_unused_result)) -+#define __malloc __attribute__((__malloc__)) -+#endif -+ -+#if GCC_VERSION >= 40000 -+ -+/* GCC 4.1.[01] miscompiles __weak */ -+#ifdef __KERNEL__ -+# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 -+# error Your version of gcc miscompiles the __weak directive -+# endif -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __compiler_offsetof(a, b) \ -+ __builtin_offsetof(a, b) -+ -+#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 -+# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) -+#endif -+ -+#if GCC_VERSION >= 40300 -+/* Mark functions as cold. gcc will assume any path leading to a call -+ * to them will be unlikely. This means a lot of manual unlikely()s -+ * are unnecessary now for any paths leading to the usual suspects -+ * like BUG(), printk(), panic() etc. [but let's keep them for now for -+ * older compilers] -+ * -+ * Early snapshots of gcc 4.3 don't support this and we can't detect this -+ * in the preprocessor, but we can live with this because they're unreleased. -+ * Maketime probing would be overkill here. -+ * -+ * gcc also has a __attribute__((__hot__)) to move hot functions into -+ * a special section, but I don't see any sense in this right now in -+ * the kernel context -+ */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+#endif /* GCC_VERSION >= 40300 */ -+ -+#if GCC_VERSION >= 40500 -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__, __optimize__("no-tracer"))) -+ -+#endif /* GCC_VERSION >= 40500 */ -+ -+#if GCC_VERSION >= 40600 -+/* -+ * When used with Link Time Optimization, gcc can optimize away C functions or -+ * variables which are referenced only from assembly code. __visible tells the -+ * optimizer that something else uses this function or variable, thus preventing -+ * this. -+ */ -+#define __visible __attribute__((externally_visible)) -+#endif -+ -+ -+#if GCC_VERSION >= 40900 && !defined(__CHECKER__) -+/* -+ * __assume_aligned(n, k): Tell the optimizer that the returned -+ * pointer can be assumed to be k modulo n. The second argument is -+ * optional (default 0), so we use a variadic macro to make the -+ * shorthand. -+ * -+ * Beware: Do not apply this to functions which may return -+ * ERR_PTRs. Also, it is probably unwise to apply it to functions -+ * returning extra information in the low bits (but in that case the -+ * compiler should see some alignment anyway, when the return value is -+ * massaged by 'flags = ptr & 3; ptr &= ~3;'). -+ */ -+#define __assume_aligned(a, ...) __attribute__((__assume_aligned__(a, ## __VA_ARGS__))) -+#endif -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#if GCC_VERSION >= 40400 -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#endif -+#if GCC_VERSION >= 40800 -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -+ -+#if GCC_VERSION >= 50000 -+#define KASAN_ABI_VERSION 4 -+#elif GCC_VERSION >= 40902 -+#define KASAN_ABI_VERSION 3 -+#endif -+ -+#if GCC_VERSION >= 40902 -+/* -+ * Tell the compiler that address safety instrumentation (KASAN) -+ * should not be applied to that function. -+ * Conflicts with inlining: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 -+ */ -+#define __no_sanitize_address __attribute__((no_sanitize_address)) -+#endif -+ -+#endif /* gcc version >= 40000 specific checks */ -+ -+#if !defined(__noclone) -+#define __noclone /* not needed */ -+#endif -+ -+#if !defined(__no_sanitize_address) -+#define __no_sanitize_address -+#endif -+ -+/* -+ * A trick to suppress uninitialized variable warning without generating any -+ * code -+ */ -+#define uninitialized_var(x) x = x diff --git a/package/boot/uboot-oxnas/patches/420-gcc-7-compiler.patch b/package/boot/uboot-oxnas/patches/420-gcc-7-compiler.patch deleted file mode 100644 index 0951629642..0000000000 --- a/package/boot/uboot-oxnas/patches/420-gcc-7-compiler.patch +++ /dev/null @@ -1,287 +0,0 @@ ---- /dev/null -+++ b/include/linux/compiler-gcc7.h -@@ -0,0 +1,284 @@ -+#ifndef __LINUX_COMPILER_H -+#error "Please don't include directly, include instead." -+#endif -+ -+/* -+ * Common definitions for all gcc versions go here. -+ */ -+#define GCC_VERSION (__GNUC__ * 10000 \ -+ + __GNUC_MINOR__ * 100 \ -+ + __GNUC_PATCHLEVEL__) -+ -+/* Optimization barrier */ -+ -+/* The "volatile" is due to gcc bugs */ -+#define barrier() __asm__ __volatile__("": : :"memory") -+/* -+ * This version is i.e. to prevent dead stores elimination on @ptr -+ * where gcc and llvm may behave differently when otherwise using -+ * normal barrier(): while gcc behavior gets along with a normal -+ * barrier(), llvm needs an explicit input variable to be assumed -+ * clobbered. The issue is as follows: while the inline asm might -+ * access any memory it wants, the compiler could have fit all of -+ * @ptr into memory registers instead, and since @ptr never escaped -+ * from that, it proofed that the inline asm wasn't touching any of -+ * it. This version works well with both compilers, i.e. we're telling -+ * the compiler that the inline asm absolutely may see the contents -+ * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 -+ */ -+#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") -+ -+/* -+ * This macro obfuscates arithmetic on a variable address so that gcc -+ * shouldn't recognize the original var, and make assumptions about it. -+ * -+ * This is needed because the C standard makes it undefined to do -+ * pointer arithmetic on "objects" outside their boundaries and the -+ * gcc optimizers assume this is the case. In particular they -+ * assume such arithmetic does not wrap. -+ * -+ * A miscompilation has been observed because of this on PPC. -+ * To work around it we hide the relationship of the pointer and the object -+ * using this macro. -+ * -+ * Versions of the ppc64 compiler before 4.1 had a bug where use of -+ * RELOC_HIDE could trash r30. The bug can be worked around by changing -+ * the inline assembly constraint from =g to =r, in this particular -+ * case either is valid. -+ */ -+#define RELOC_HIDE(ptr, off) \ -+({ \ -+ unsigned long __ptr; \ -+ __asm__ ("" : "=r"(__ptr) : "0"(ptr)); \ -+ (typeof(ptr)) (__ptr + (off)); \ -+}) -+ -+/* Make the optimizer believe the variable can be manipulated arbitrarily. */ -+#define OPTIMIZER_HIDE_VAR(var) \ -+ __asm__ ("" : "=r" (var) : "0" (var)) -+ -+#ifdef __CHECKER__ -+#define __must_be_array(a) 0 -+#else -+/* &a[0] degrades to a pointer: a different type from an array */ -+#define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) -+#endif -+ -+/* -+ * Force always-inline if the user requests it so via the .config, -+ * or if gcc is too old: -+ */ -+#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \ -+ !defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4) -+#define inline inline __attribute__((always_inline)) notrace -+#define __inline__ __inline__ __attribute__((always_inline)) notrace -+#define __inline __inline __attribute__((always_inline)) notrace -+#else -+/* A lot of inline functions can cause havoc with function tracing */ -+#define inline inline notrace -+#define __inline__ __inline__ notrace -+#define __inline __inline notrace -+#endif -+ -+#define __always_inline inline __attribute__((always_inline)) -+#define noinline __attribute__((noinline)) -+ -+#define __deprecated __attribute__((deprecated)) -+#define __packed __attribute__((packed)) -+#define __weak __attribute__((weak)) -+#define __alias(symbol) __attribute__((alias(#symbol))) -+ -+/* -+ * it doesn't make sense on ARM (currently the only user of __naked) -+ * to trace naked functions because then mcount is called without -+ * stack and frame pointer being set up and there is no chance to -+ * restore the lr register to the value before mcount was called. -+ * -+ * The asm() bodies of naked functions often depend on standard calling -+ * conventions, therefore they must be noinline and noclone. -+ * -+ * GCC 4.[56] currently fail to enforce this, so we must do so ourselves. -+ * See GCC PR44290. -+ */ -+#define __naked __attribute__((naked)) noinline __noclone notrace -+ -+#define __noreturn __attribute__((noreturn)) -+ -+/* -+ * From the GCC manual: -+ * -+ * Many functions have no effects except the return value and their -+ * return value depends only on the parameters and/or global -+ * variables. Such a function can be subject to common subexpression -+ * elimination and loop optimization just as an arithmetic operator -+ * would be. -+ * [...] -+ */ -+#define __pure __attribute__((pure)) -+#define __aligned(x) __attribute__((aligned(x))) -+#define __printf(a, b) __attribute__((format(printf, a, b))) -+#define __scanf(a, b) __attribute__((format(scanf, a, b))) -+#define __attribute_const__ __attribute__((__const__)) -+#define __maybe_unused __attribute__((unused)) -+#define __always_unused __attribute__((unused)) -+ -+/* gcc version specific checks */ -+ -+#if GCC_VERSION < 30200 -+# error Sorry, your compiler is too old - please upgrade it. -+#endif -+ -+#if GCC_VERSION < 30300 -+# define __used __attribute__((__unused__)) -+#else -+# define __used __attribute__((__used__)) -+#endif -+ -+#ifdef CONFIG_GCOV_KERNEL -+# if GCC_VERSION < 30400 -+# error "GCOV profiling support for gcc versions below 3.4 not included" -+# endif /* __GNUC_MINOR__ */ -+#endif /* CONFIG_GCOV_KERNEL */ -+ -+#if GCC_VERSION >= 30400 -+#define __must_check __attribute__((warn_unused_result)) -+#define __malloc __attribute__((__malloc__)) -+#endif -+ -+#if GCC_VERSION >= 40000 -+ -+/* GCC 4.1.[01] miscompiles __weak */ -+#ifdef __KERNEL__ -+# if GCC_VERSION >= 40100 && GCC_VERSION <= 40101 -+# error Your version of gcc miscompiles the __weak directive -+# endif -+#endif -+ -+#define __used __attribute__((__used__)) -+#define __compiler_offsetof(a, b) \ -+ __builtin_offsetof(a, b) -+ -+#if GCC_VERSION >= 40100 && GCC_VERSION < 40600 -+# define __compiletime_object_size(obj) __builtin_object_size(obj, 0) -+#endif -+ -+#if GCC_VERSION >= 40300 -+/* Mark functions as cold. gcc will assume any path leading to a call -+ * to them will be unlikely. This means a lot of manual unlikely()s -+ * are unnecessary now for any paths leading to the usual suspects -+ * like BUG(), printk(), panic() etc. [but let's keep them for now for -+ * older compilers] -+ * -+ * Early snapshots of gcc 4.3 don't support this and we can't detect this -+ * in the preprocessor, but we can live with this because they're unreleased. -+ * Maketime probing would be overkill here. -+ * -+ * gcc also has a __attribute__((__hot__)) to move hot functions into -+ * a special section, but I don't see any sense in this right now in -+ * the kernel context -+ */ -+#define __cold __attribute__((__cold__)) -+ -+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) -+ -+#ifndef __CHECKER__ -+# define __compiletime_warning(message) __attribute__((warning(message))) -+# define __compiletime_error(message) __attribute__((error(message))) -+#endif /* __CHECKER__ */ -+#endif /* GCC_VERSION >= 40300 */ -+ -+#if GCC_VERSION >= 40500 -+/* -+ * Mark a position in code as unreachable. This can be used to -+ * suppress control flow warnings after asm blocks that transfer -+ * control elsewhere. -+ * -+ * Early snapshots of gcc 4.5 don't support this and we can't detect -+ * this in the preprocessor, but we can live with this because they're -+ * unreleased. Really, we need to have autoconf for the kernel. -+ */ -+#define unreachable() __builtin_unreachable() -+ -+/* Mark a function definition as prohibited from being cloned. */ -+#define __noclone __attribute__((__noclone__, __optimize__("no-tracer"))) -+ -+#endif /* GCC_VERSION >= 40500 */ -+ -+#if GCC_VERSION >= 40600 -+/* -+ * When used with Link Time Optimization, gcc can optimize away C functions or -+ * variables which are referenced only from assembly code. __visible tells the -+ * optimizer that something else uses this function or variable, thus preventing -+ * this. -+ */ -+#define __visible __attribute__((externally_visible)) -+#endif -+ -+ -+#if GCC_VERSION >= 40900 && !defined(__CHECKER__) -+/* -+ * __assume_aligned(n, k): Tell the optimizer that the returned -+ * pointer can be assumed to be k modulo n. The second argument is -+ * optional (default 0), so we use a variadic macro to make the -+ * shorthand. -+ * -+ * Beware: Do not apply this to functions which may return -+ * ERR_PTRs. Also, it is probably unwise to apply it to functions -+ * returning extra information in the low bits (but in that case the -+ * compiler should see some alignment anyway, when the return value is -+ * massaged by 'flags = ptr & 3; ptr &= ~3;'). -+ */ -+#define __assume_aligned(a, ...) __attribute__((__assume_aligned__(a, ## __VA_ARGS__))) -+#endif -+ -+/* -+ * GCC 'asm goto' miscompiles certain code sequences: -+ * -+ * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 -+ * -+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. -+ * -+ * (asm goto is automatically volatile - the naming reflects this.) -+ */ -+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) -+ -+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP -+#if GCC_VERSION >= 40400 -+#define __HAVE_BUILTIN_BSWAP32__ -+#define __HAVE_BUILTIN_BSWAP64__ -+#endif -+#if GCC_VERSION >= 40800 -+#define __HAVE_BUILTIN_BSWAP16__ -+#endif -+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */ -+ -+#if GCC_VERSION >= 50000 -+#define KASAN_ABI_VERSION 4 -+#elif GCC_VERSION >= 40902 -+#define KASAN_ABI_VERSION 3 -+#endif -+ -+#if GCC_VERSION >= 40902 -+/* -+ * Tell the compiler that address safety instrumentation (KASAN) -+ * should not be applied to that function. -+ * Conflicts with inlining: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=67368 -+ */ -+#define __no_sanitize_address __attribute__((no_sanitize_address)) -+#endif -+ -+#endif /* gcc version >= 40000 specific checks */ -+ -+#if !defined(__noclone) -+#define __noclone /* not needed */ -+#endif -+ -+#if !defined(__no_sanitize_address) -+#define __no_sanitize_address -+#endif -+ -+/* -+ * A trick to suppress uninitialized variable warning without generating any -+ * code -+ */ -+#define uninitialized_var(x) x = x diff --git a/package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch b/package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch deleted file mode 100644 index 957c492917..0000000000 --- a/package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/common/cmd_bootm.c -+++ b/common/cmd_bootm.c -@@ -77,7 +77,7 @@ static int do_bootm_subcommand(cmd_tbl_t - return CMD_RET_USAGE; - } - -- if (state != BOOTM_STATE_START && images.state >= state) { -+ if (!(state & BOOTM_STATE_START) && images.state >= state) { - printf("Trying to execute a command out of order\n"); - return CMD_RET_USAGE; - } diff --git a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/Makefile b/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/Makefile deleted file mode 100644 index 4c32f5cb21..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += reset.o -obj-y += timer.o -obj-y += clock.o -obj-y += pinmux.o diff --git a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/clock.c b/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/clock.c deleted file mode 100644 index 8974ca0296..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/clock.c +++ /dev/null @@ -1,97 +0,0 @@ -#include -#include -#include -#include - -typedef struct { - unsigned short mhz; - unsigned char refdiv; - unsigned char outdiv; - unsigned int fbdiv; - unsigned short bwadj; - unsigned short sfreq; - unsigned int sslope; -} PLL_CONFIG; - -const PLL_CONFIG C_PLL_CONFIG[] = { - { 500, 1, 2, 3932160, 119, 208, 189 }, // 500 MHz - { 525, 2, 1, 4128768, 125, 139, 297 }, // 525 MHz - { 550, 2, 1, 4325376, 131, 139, 311 }, // 550 MHz - { 575, 2, 1, 4521984, 137, 139, 326 }, // 575 MHz - { 600, 2, 1, 4718592, 143, 138, 339 }, // 600 MHz - { 625, 1, 1, 3276800, 99, 208, 157 }, // 625 MHz - { 650, 1, 1, 3407872, 103, 208, 164 }, // 650 MHz - { 675, 1, 1, 3538944, 107, 208, 170 }, // 675 MHz - { 700, 0, 0, 917504, 27, 416, 22 }, // 700 MHz - { 725, 1, 1, 3801088, 115, 208, 182 }, // 725 MHz - { 750, 0, 0, 983040, 29, 416, 23 }, // 750 MHz - { 775, 3, 0, 4063232, 123, 104, 390 }, // 775 MHz - { 800, 3, 0, 4194304, 127, 104, 403 }, // 800 MHz - { 825, 3, 0, 4325376, 131, 104, 415 }, // 825 MHz - { 850, 2, 0, 3342336, 101, 139, 241 }, // 850 MHz - { 875, 2, 0, 3440640, 104, 139, 248 }, // 875 MHz - { 900, 2, 0, 3538944, 107, 139, 255 }, // 900 MHz - { 925, 2, 0, 3637248, 110, 139, 262 }, // 925 MHz - { 950, 2, 0, 3735552, 113, 139, 269 }, // 950 MHz - { 975, 2, 0, 3833856, 116, 139, 276 }, // 975 MHz - { 1000, 2, 0, 3932160, 119, 139, 283 }, // 1000 MHz -}; - -#define PLL_BYPASS (1<<1) -#define SAT_ENABLE (1<<3) - -#define PLL_OUTDIV_SHIFT 4 -#define PLL_REFDIV_SHIFT 8 -#define PLL_BWADJ_SHIFT 16 - -#define PLL_LOW_FREQ 500 -#define PLL_FREQ_STEP 25 -static void plla_configure(int outdiv, int refdiv, int fbdiv, int bwadj, - int sfreq, int sslope) -{ - setbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS); - udelay(10); - reset_block(SYS_CTRL_RST_PLLA, 1); - udelay(10); - - writel((refdiv << PLL_REFDIV_SHIFT) | (outdiv << PLL_OUTDIV_SHIFT) | - SAT_ENABLE | PLL_BYPASS, - SYS_CTRL_PLLA_CTRL0); - - writel(fbdiv, SYS_CTRL_PLLA_CTRL1); - writel((bwadj << PLL_BWADJ_SHIFT) | sfreq, SYS_CTRL_PLLA_CTRL2); - writel(sslope, SYS_CTRL_PLLA_CTRL3); - - udelay(10); // 5us delay required (from TCI datasheet), use 10us - - reset_block(SYS_CTRL_RST_PLLA, 0); - - udelay(100); // Delay for PLL to lock - - printf(" plla_ctrl0 : %08x\n", readl(SYS_CTRL_PLLA_CTRL0)); - printf(" plla_ctrl1 : %08x\n", readl(SYS_CTRL_PLLA_CTRL1)); - printf(" plla_ctrl2 : %08x\n", readl(SYS_CTRL_PLLA_CTRL2)); - printf(" plla_ctrl3 : %08x\n", readl(SYS_CTRL_PLLA_CTRL3)); - - clrbits_le32(SYS_CTRL_PLLA_CTRL0, PLL_BYPASS); // Take PLL out of bypass - puts("\nPLLA Set\n"); -} - -int plla_set_config(int mhz) -{ - int index = (mhz - PLL_LOW_FREQ) / PLL_FREQ_STEP; - const PLL_CONFIG *cfg; - - if (index < 0 || index > ARRAY_SIZE(C_PLL_CONFIG)) { - debug("Freq %d MHz out of range, default to lowest\n", mhz); - index = 0; - } - cfg = &C_PLL_CONFIG[index]; - - printf("Attempting to set PLLA to %d MHz ...\n", (unsigned) cfg->mhz); - plla_configure(cfg->outdiv, cfg->refdiv, cfg->fbdiv, cfg->bwadj, - cfg->sfreq, cfg->sslope); - - return cfg->mhz; -} - diff --git a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/pinmux.c b/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/pinmux.c deleted file mode 100644 index a6f5e9abc4..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/pinmux.c +++ /dev/null @@ -1,43 +0,0 @@ -#include -#include - -void pinmux_set(int bank, int pin, int func) -{ - u32 reg; - u32 base; - /* TODO: check parameters */ - - if (bank == PINMUX_BANK_MFA) - base = SYS_CONTROL_BASE; - else - base = SEC_CONTROL_BASE; - - clrbits_le32(base + PINMUX_SECONDARY_SEL, BIT(pin)); - clrbits_le32(base + PINMUX_TERTIARY_SEL, BIT(pin)); - clrbits_le32(base + PINMUX_QUATERNARY_SEL, BIT(pin)); - clrbits_le32(base + PINMUX_DEBUG_SEL, BIT(pin)); - clrbits_le32(base + PINMUX_ALTERNATIVE_SEL, BIT(pin)); - - switch (func) { - case PINMUX_GPIO: - default: - return; - break; - case PINMUX_2: - reg = base + PINMUX_SECONDARY_SEL; - break; - case PINMUX_3: - reg = base + PINMUX_TERTIARY_SEL; - break; - case PINMUX_4: - reg = base + PINMUX_QUATERNARY_SEL; - break; - case PINMUX_DEBUG: - reg = base + PINMUX_DEBUG_SEL; - break; - case PINMUX_ALT: - reg = base + PINMUX_ALTERNATIVE_SEL; - break; - } - setbits_le32(reg, BIT(pin)); -} diff --git a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/reset.c b/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/reset.c deleted file mode 100644 index 276c912383..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/reset.c +++ /dev/null @@ -1,91 +0,0 @@ -#include -#include -#include -#include - -void reset_cpu(ulong addr) -{ - u32 value; - - // Assert reset to cores as per power on defaults - // Don't touch the DDR interface as things will come to an impromptu stop - // NB Possibly should be asserting reset for PLLB, but there are timing - // concerns here according to the docs - - value = - BIT(SYS_CTRL_RST_COPRO ) | - BIT(SYS_CTRL_RST_USBHS ) | - BIT(SYS_CTRL_RST_USBHSPHYA ) | - BIT(SYS_CTRL_RST_MACA ) | - BIT(SYS_CTRL_RST_PCIEA ) | - BIT(SYS_CTRL_RST_SGDMA ) | - BIT(SYS_CTRL_RST_CIPHER ) | - BIT(SYS_CTRL_RST_SATA ) | - BIT(SYS_CTRL_RST_SATA_LINK ) | - BIT(SYS_CTRL_RST_SATA_PHY ) | - BIT(SYS_CTRL_RST_PCIEPHY ) | - BIT(SYS_CTRL_RST_STATIC ) | - BIT(SYS_CTRL_RST_UART1 ) | - BIT(SYS_CTRL_RST_UART2 ) | - BIT(SYS_CTRL_RST_MISC ) | - BIT(SYS_CTRL_RST_I2S ) | - BIT(SYS_CTRL_RST_SD ) | - BIT(SYS_CTRL_RST_MACB ) | - BIT(SYS_CTRL_RST_PCIEB ) | - BIT(SYS_CTRL_RST_VIDEO ) | - BIT(SYS_CTRL_RST_USBHSPHYB ) | - BIT(SYS_CTRL_RST_USBDEV ); - - writel(value, SYS_CTRL_RST_SET_CTRL); - - // Release reset to cores as per power on defaults - writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL); - - // Disable clocks to cores as per power-on defaults - must leave DDR - // related clocks enabled otherwise we'll stop rather abruptly. - value = - BIT(SYS_CTRL_CLK_COPRO) | - BIT(SYS_CTRL_CLK_DMA) | - BIT(SYS_CTRL_CLK_CIPHER) | - BIT(SYS_CTRL_CLK_SD) | - BIT(SYS_CTRL_CLK_SATA) | - BIT(SYS_CTRL_CLK_I2S) | - BIT(SYS_CTRL_CLK_USBHS) | - BIT(SYS_CTRL_CLK_MAC) | - BIT(SYS_CTRL_CLK_PCIEA) | - BIT(SYS_CTRL_CLK_STATIC) | - BIT(SYS_CTRL_CLK_MACB) | - BIT(SYS_CTRL_CLK_PCIEB) | - BIT(SYS_CTRL_CLK_REF600) | - BIT(SYS_CTRL_CLK_USBDEV); - - writel(value, SYS_CTRL_CLK_CLR_CTRL); - - // Enable clocks to cores as per power-on defaults - - // Set sys-control pin mux'ing as per power-on defaults - - writel(0, SYS_CONTROL_BASE + PINMUX_SECONDARY_SEL); - writel(0, SYS_CONTROL_BASE + PINMUX_TERTIARY_SEL); - writel(0, SYS_CONTROL_BASE + PINMUX_QUATERNARY_SEL); - writel(0, SYS_CONTROL_BASE + PINMUX_DEBUG_SEL); - writel(0, SYS_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL); - writel(0, SYS_CONTROL_BASE + PINMUX_PULLUP_SEL); - - writel(0, SEC_CONTROL_BASE + PINMUX_SECONDARY_SEL); - writel(0, SEC_CONTROL_BASE + PINMUX_TERTIARY_SEL); - writel(0, SEC_CONTROL_BASE + PINMUX_QUATERNARY_SEL); - writel(0, SEC_CONTROL_BASE + PINMUX_DEBUG_SEL); - writel(0, SEC_CONTROL_BASE + PINMUX_ALTERNATIVE_SEL); - writel(0, SEC_CONTROL_BASE + PINMUX_PULLUP_SEL); - - // No need to save any state, as the ROM loader can determine whether reset - // is due to power cycling or programatic action, just hit the (self- - // clearing) CPU reset bit of the block reset register - value = - BIT(SYS_CTRL_RST_SCU) | - BIT(SYS_CTRL_RST_ARM0) | - BIT(SYS_CTRL_RST_ARM1); - - writel(value, SYS_CTRL_RST_SET_CTRL); -} diff --git a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/timer.c b/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/timer.c deleted file mode 100644 index 5e876080db..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/cpu/arm1136/nas782x/timer.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * Richard Woodruff - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * Alex Zuepke - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (1 << (CONFIG_TIMER_PRESCALE * 4))) -#define TIMER_LOAD_VAL 0xFFFFFF - -/* macro to read the 32 bit timer */ -#define READ_TIMER (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR)) \ - / (TIMER_CLOCK / CONFIG_SYS_HZ) - -#define READ_TIMER_HW (TIMER_LOAD_VAL - readl(CONFIG_SYS_TIMERBASE + TIMER_CURR)) - -DECLARE_GLOBAL_DATA_PTR; - -int timer_init (void) -{ - int32_t val; - - /* Start the counter ticking up */ - writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + TIMER_LOAD); /* reload value on overflow*/ - - val = (CONFIG_TIMER_PRESCALE << TIMER_PRESCALE_SHIFT) | - (TIMER_MODE_PERIODIC << TIMER_MODE_SHIFT) | - (TIMER_ENABLE << TIMER_ENABLE_SHIFT); /* mask to enable timer*/ - writel(val, CONFIG_SYS_TIMERBASE + TIMER_CTRL); /* start timer */ - - /* reset time */ - gd->arch.lastinc = READ_TIMER; /* capture current incrementer value */ - gd->arch.tbl = 0; /* start "advancing" time stamp */ - - return(0); -} -/* - * timer without interrupts - */ -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay (unsigned long usec) -{ - ulong tmo, tmp; - - if (usec > 100000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - - tmp = get_timer (0); /* get current timestamp */ - while (get_timer (tmp) < tmo)/* loop till event */ - /*NOP*/; - } else { /* else small number, convert to hw ticks */ - tmo = usec * (TIMER_CLOCK / 1000) / 1000; - /* timeout is no more than 0.1s, and the hw timer will roll over at most once */ - tmp = READ_TIMER_HW; - while (((READ_TIMER_HW -tmp) & TIMER_LOAD_VAL) < tmo)/* loop till event */ - /*NOP*/; - } -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; /* current tick value */ - - if (now >= gd->arch.lastinc) { /* normal mode (non roll) */ - /* move stamp fordward with absoulte diff ticks */ - gd->arch.tbl += (now - gd->arch.lastinc); - } else { - /* we have rollover of incrementer */ - gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ)) - - gd->arch.lastinc) + now; - } - gd->arch.lastinc = now; - return gd->arch.tbl; -} - - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - ulong tbclk; - tbclk = CONFIG_SYS_HZ; - return tbclk; -} diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/clock.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/clock.h deleted file mode 100644 index da7dd1c063..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/clock.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef _NAS782X_CLOCK_H -#define _NAS782X_CLOCK_H - -#include -#include - -/* bit numbers of clock control register */ -#define SYS_CTRL_CLK_COPRO 0 -#define SYS_CTRL_CLK_DMA 1 -#define SYS_CTRL_CLK_CIPHER 2 -#define SYS_CTRL_CLK_SD 3 -#define SYS_CTRL_CLK_SATA 4 -#define SYS_CTRL_CLK_I2S 5 -#define SYS_CTRL_CLK_USBHS 6 -#define SYS_CTRL_CLK_MACA 7 -#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA -#define SYS_CTRL_CLK_PCIEA 8 -#define SYS_CTRL_CLK_STATIC 9 -#define SYS_CTRL_CLK_MACB 10 -#define SYS_CTRL_CLK_PCIEB 11 -#define SYS_CTRL_CLK_REF600 12 -#define SYS_CTRL_CLK_USBDEV 13 -#define SYS_CTRL_CLK_DDR 14 -#define SYS_CTRL_CLK_DDRPHY 15 -#define SYS_CTRL_CLK_DDRCK 16 - -/* bit numbers of reset control register */ -#define SYS_CTRL_RST_SCU 0 -#define SYS_CTRL_RST_COPRO 1 -#define SYS_CTRL_RST_ARM0 2 -#define SYS_CTRL_RST_ARM1 3 -#define SYS_CTRL_RST_USBHS 4 -#define SYS_CTRL_RST_USBHSPHYA 5 -#define SYS_CTRL_RST_MACA 6 -#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA -#define SYS_CTRL_RST_PCIEA 7 -#define SYS_CTRL_RST_SGDMA 8 -#define SYS_CTRL_RST_CIPHER 9 -#define SYS_CTRL_RST_DDR 10 -#define SYS_CTRL_RST_SATA 11 -#define SYS_CTRL_RST_SATA_LINK 12 -#define SYS_CTRL_RST_SATA_PHY 13 -#define SYS_CTRL_RST_PCIEPHY 14 -#define SYS_CTRL_RST_STATIC 15 -#define SYS_CTRL_RST_GPIO 16 -#define SYS_CTRL_RST_UART1 17 -#define SYS_CTRL_RST_UART2 18 -#define SYS_CTRL_RST_MISC 19 -#define SYS_CTRL_RST_I2S 20 -#define SYS_CTRL_RST_SD 21 -#define SYS_CTRL_RST_MACB 22 -#define SYS_CTRL_RST_PCIEB 23 -#define SYS_CTRL_RST_VIDEO 24 -#define SYS_CTRL_RST_DDR_PHY 25 -#define SYS_CTRL_RST_USBHSPHYB 26 -#define SYS_CTRL_RST_USBDEV 27 -#define SYS_CTRL_RST_ARMDBG 29 -#define SYS_CTRL_RST_PLLA 30 -#define SYS_CTRL_RST_PLLB 31 - -static inline void reset_block(int block, int reset) -{ - u32 reg; - if (reset) - reg = SYS_CTRL_RST_SET_CTRL; - else - reg = SYS_CTRL_RST_CLR_CTRL; - - writel(BIT(block), reg); -} - -static inline void enable_clock(int block) -{ - writel(BIT(block), SYS_CTRL_CLK_SET_CTRL); -} - -static inline void disable_clock(int block) -{ - writel(BIT(block), SYS_CTRL_CLK_CLR_CTRL); -} - -int plla_set_config(int idx); - -#endif /* _NAS782X_CLOCK_H */ diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/cpu.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/cpu.h deleted file mode 100644 index 11e803c5c0..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/cpu.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _NAS782X_CPU_H -#define _NAS782X_CPU_H - -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -#include -#include -#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ - -#include -#include - -#ifndef __KERNEL_STRICT_NAMES -#ifndef __ASSEMBLY__ - -#define BIT(x) (1 << (x)) - -/* fix "implicit declaration of function" warnning */ -void *memalign(size_t alignment, size_t bytes); -void free(void* mem); -void *malloc(size_t bytes); -void *calloc(size_t n, size_t elem_size); - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL_STRICT_NAMES */ - -#endif /* _NAS782X_CPU_H */ diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/hardware.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/hardware.h deleted file mode 100644 index f26b17f062..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/hardware.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _NAS782X_HARDWARE_H -#define _NAS782X_HARDWARE_H - -/* Core addresses */ -#define USB_HOST_BASE 0x40200000 -#define MACA_BASE 0x40400000 -#define MACB_BASE 0x40800000 -#define MAC_BASE MACA_BASE -#define STATIC_CS0_BASE 0x41000000 -#define STATIC_CS1_BASE 0x41400000 -#define STATIC_CONTROL_BASE 0x41C00000 -#define SATA_DATA_BASE 0x42000000 /* non-functional, DMA just needs an address */ -#define GPIO_1_BASE 0x44000000 -#define GPIO_2_BASE 0x44100000 -#define UART_1_BASE 0x44200000 -#define UART_2_BASE 0x44300000 -#define SYS_CONTROL_BASE 0x44e00000 -#define SEC_CONTROL_BASE 0x44f00000 -#define RPSA_BASE 0x44400000 -#define RPSC_BASE 0x44500000 -#define DDR_BASE 0x44700000 - -#define SATA_BASE 0x45900000 -#define SATA_0_REGS_BASE 0x45900000 -#define SATA_1_REGS_BASE 0x45910000 -#define SATA_DMA_REGS_BASE 0x459a0000 -#define SATA_SGDMA_REGS_BASE 0x459b0000 -#define SATA_HOST_REGS_BASE 0x459e0000 - -#endif /* _NAS782X_HARDWARE_H */ diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/pinmux.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/pinmux.h deleted file mode 100644 index 810ba5cbab..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/pinmux.h +++ /dev/null @@ -1,46 +0,0 @@ -#ifndef _NAS782X_PINMUX_H -#define _NAS782X_PINMUX_H - -#include - -#define PINMUX_GPIO 0 -#define PINMUX_2 1 -#define PINMUX_3 2 -#define PINMUX_4 3 -#define PINMUX_DEBUG 4 -#define PINMUX_ALT 5 - -#define PINMUX_BANK_MFA 0 -#define PINMUX_BANK_MFB 1 - -/* System control multi-function pin function selection */ -#define PINMUX_SECONDARY_SEL 0x14 -#define PINMUX_TERTIARY_SEL 0x8c -#define PINMUX_QUATERNARY_SEL 0x94 -#define PINMUX_DEBUG_SEL 0x9c -#define PINMUX_ALTERNATIVE_SEL 0xa4 -#define PINMUX_PULLUP_SEL 0xac - -#define PINMUX_UARTA_SIN PINMUX_ALT -#define PINMUX_UARTA_SOUT PINMUX_ALT - -#define PINMUX_STATIC_DATA0 PINMUX_2 -#define PINMUX_STATIC_DATA1 PINMUX_2 -#define PINMUX_STATIC_DATA2 PINMUX_2 -#define PINMUX_STATIC_DATA3 PINMUX_2 -#define PINMUX_STATIC_DATA4 PINMUX_2 -#define PINMUX_STATIC_DATA5 PINMUX_2 -#define PINMUX_STATIC_DATA6 PINMUX_2 -#define PINMUX_STATIC_DATA7 PINMUX_2 -#define PINMUX_STATIC_NWE PINMUX_2 -#define PINMUX_STATIC_NOE PINMUX_2 -#define PINMUX_STATIC_NCS PINMUX_2 -#define PINMUX_STATIC_ADDR18 PINMUX_2 -#define PINMUX_STATIC_ADDR19 PINMUX_2 - -#define PINMUX_MACA_MDC PINMUX_2 -#define PINMUX_MACA_MDIO PINMUX_2 - -extern void pinmux_set(int bank, int pin, int func); - -#endif /* _NAS782X_PINMUX_H */ diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/spl.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/spl.h deleted file mode 100644 index f73afdab4f..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/spl.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _NAS782X_SPL_H -#define _NAS782X_SPL_H - -#include - -#endif /* _NAS782X_SPL_H */ diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/sysctl.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/sysctl.h deleted file mode 100644 index 3867e45f92..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/sysctl.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef _NAS782X_SYSCTL_H -#define _NAS782X_SYSCTL_H - -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -#include -#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */ - -#include - -/** - * System block reset and clock control - */ -#define SYS_CTRL_PCI_STAT (SYS_CONTROL_BASE + 0x20) -#define SYS_CTRL_CLK_SET_CTRL (SYS_CONTROL_BASE + 0x2C) -#define SYS_CTRL_CLK_CLR_CTRL (SYS_CONTROL_BASE + 0x30) -#define SYS_CTRL_RST_SET_CTRL (SYS_CONTROL_BASE + 0x34) -#define SYS_CTRL_RST_CLR_CTRL (SYS_CONTROL_BASE + 0x38) -#define SYS_CTRL_PLLSYS_CTRL (SYS_CONTROL_BASE + 0x48) -#define SYS_CTRL_PLLSYS_KEY_CTRL (SYS_CONTROL_BASE + 0x6C) -#define SYS_CTRL_GMAC_CTRL (SYS_CONTROL_BASE + 0x78) - -/* Scratch registers */ -#define SYS_CTRL_SCRATCHWORD0 (SYS_CONTROL_BASE + 0xc4) -#define SYS_CTRL_SCRATCHWORD1 (SYS_CONTROL_BASE + 0xc8) -#define SYS_CTRL_SCRATCHWORD2 (SYS_CONTROL_BASE + 0xcc) -#define SYS_CTRL_SCRATCHWORD3 (SYS_CONTROL_BASE + 0xd0) - -#define SYS_CTRL_PLLA_CTRL0 (SYS_CONTROL_BASE + 0x1F0) -#define SYS_CTRL_PLLA_CTRL1 (SYS_CONTROL_BASE + 0x1F4) -#define SYS_CTRL_PLLA_CTRL2 (SYS_CONTROL_BASE + 0x1F8) -#define SYS_CTRL_PLLA_CTRL3 (SYS_CONTROL_BASE + 0x1FC) - -#define SYS_CTRL_GMAC_AUTOSPEED 3 -#define SYS_CTRL_GMAC_RGMII 2 -#define SYS_CTRL_GMAC_SIMPLE_MUX 1 -#define SYS_CTRL_GMAC_CKEN_GTX 0 - -#define SYS_CTRL_CKCTRL_CTRL_ADDR (SYS_CONTROL_BASE + 0x64) - -#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0 -#define SYS_CTRL_CKCTRL_SLOW_BIT 8 - - -#define SYS_CTRL_USBHSMPH_CTRL (SYS_CONTROL_BASE + 0x40) -#define SYS_CTRL_USBHSMPH_STAT (SYS_CONTROL_BASE + 0x44) -#define SYS_CTRL_REF300_DIV (SYS_CONTROL_BASE + 0xF8) -#define SYS_CTRL_USBHSPHY_CTRL (SYS_CONTROL_BASE + 0x84) -#define SYS_CTRL_USB_CTRL (SYS_CONTROL_BASE + 0x90) - -/* System control multi-function pin function selection */ -#define SYS_CTRL_SECONDARY_SEL (SYS_CONTROL_BASE + 0x14) -#define SYS_CTRL_TERTIARY_SEL (SYS_CONTROL_BASE + 0x8c) -#define SYS_CTRL_QUATERNARY_SEL (SYS_CONTROL_BASE + 0x94) -#define SYS_CTRL_DEBUG_SEL (SYS_CONTROL_BASE + 0x9c) -#define SYS_CTRL_ALTERNATIVE_SEL (SYS_CONTROL_BASE + 0xa4) -#define SYS_CTRL_PULLUP_SEL (SYS_CONTROL_BASE + 0xac) - -/* Secure control multi-function pin function selection */ -#define SEC_CTRL_SECONDARY_SEL (SEC_CONTROL_BASE + 0x14) -#define SEC_CTRL_TERTIARY_SEL (SEC_CONTROL_BASE + 0x8c) -#define SEC_CTRL_QUATERNARY_SEL (SEC_CONTROL_BASE + 0x94) -#define SEC_CTRL_DEBUG_SEL (SEC_CONTROL_BASE + 0x9c) -#define SEC_CTRL_ALTERNATIVE_SEL (SEC_CONTROL_BASE + 0xa4) -#define SEC_CTRL_PULLUP_SEL (SEC_CONTROL_BASE + 0xac) - -#define SEC_CTRL_COPRO_CTRL (SEC_CONTROL_BASE + 0x68) -#define SEC_CTRL_SECURE_CTRL (SEC_CONTROL_BASE + 0x98) -#define SEC_CTRL_LEON_DEBUG (SEC_CONTROL_BASE + 0xF0) -#define SEC_CTRL_PLLB_DIV_CTRL (SEC_CONTROL_BASE + 0xF8) -#define SEC_CTRL_PLLB_CTRL0 (SEC_CONTROL_BASE + 0x1F0) -#define SEC_CTRL_PLLB_CTRL1 (SEC_CONTROL_BASE + 0x1F4) -#define SEC_CTRL_PLLB_CTRL8 (SEC_CONTROL_BASE + 0x1F4) - -#define REF300_DIV_INT_SHIFT 8 -#define REF300_DIV_FRAC_SHIFT 0 -#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) -#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) - -#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 -#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 -#define USBHSPHY_ATE_ESET 14 -#define USBHSPHY_TEST_DIN 6 -#define USBHSPHY_TEST_ADD 2 -#define USBHSPHY_TEST_DOUT_SEL 1 -#define USBHSPHY_TEST_CLK 0 - -#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 -#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) -#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) -#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) - -#define USBAMUX_DEVICE BIT(4) - -#define USBPHY_REFCLKDIV_SHIFT 2 -#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) -#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) -#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) - -#define USB_CTRL_USB_CKO_SEL_BIT 0 - -#define USB_INT_CLK_XTAL 0 -#define USB_INT_CLK_REF300 2 -#define USB_INT_CLK_PLLB 3 - -#define SYS_CTRL_GMAC_AUTOSPEED 3 -#define SYS_CTRL_GMAC_RGMII 2 -#define SYS_CTRL_GMAC_SIMPLE_MUX 1 -#define SYS_CTRL_GMAC_CKEN_GTX 0 - - -#define PLLB_ENSAT 3 -#define PLLB_OUTDIV 4 -#define PLLB_REFDIV 8 -#define PLLB_DIV_INT_SHIFT 8 -#define PLLB_DIV_FRAC_SHIFT 0 -#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) -#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) - -#ifndef __KERNEL_STRICT_NAMES -#ifndef __ASSEMBLY__ - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL_STRICT_NAMES */ - -#endif /* _NAS782X_SYSCTL_H */ diff --git a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/timer.h b/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/timer.h deleted file mode 100644 index ea4d71e164..0000000000 --- a/package/boot/uboot-oxnas/src/arch/arm/include/asm/arch-nas782x/timer.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef _NAS782X_TIMER_H -#define _NAS782X_TIMER_H - -#define TIMER1_BASE (RPSA_BASE + 0x200) -#define TIMER2_BASE (RPSA_BASE + 0x220) - -#define TIMER_LOAD 0 -#define TIMER_CURR 4 -#define TIMER_CTRL 8 -#define TIMER_INTR 0x0C - -#define TIMER_PRESCALE_SHIFT 2 -#define TIMER_PRESCALE_1 0 -#define TIMER_PRESCALE_16 1 -#define TIMER_PRESCALE_256 2 -#define TIMER_MODE_SHIFT 6 -#define TIMER_MODE_FREE_RUNNING 0 -#define TIMER_MODE_PERIODIC 1 -#define TIMER_ENABLE_SHIFT 7 -#define TIMER_DISABLE 0 -#define TIMER_ENABLE 1 - -#endif /* _NAS782X_TIMER_H */ diff --git a/package/boot/uboot-oxnas/src/board/ox820/Kconfig b/package/boot/uboot-oxnas/src/board/ox820/Kconfig deleted file mode 100644 index 8f631aa67b..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_OX820 - -config SYS_CPU - default "arm1136" - -config SYS_SOC - default "nas782x" - -config SYS_BOARD - default "ox820" - -config SYS_CONFIG_NAME - default "ox820" - -endif diff --git a/package/boot/uboot-oxnas/src/board/ox820/MAINTAINERS b/package/boot/uboot-oxnas/src/board/ox820/MAINTAINERS deleted file mode 100644 index a86ba2695a..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SHEEVAPLUG BOARD -M: Daniel Golle -S: Maintained -F: board/ox820/ -F: include/configs/ox820.h -F: configs/ox820_defconfig diff --git a/package/boot/uboot-oxnas/src/board/ox820/Makefile b/package/boot/uboot-oxnas/src/board/ox820/Makefile deleted file mode 100644 index 445fc4c7da..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += ox820.o -obj-y += lowlevel_init.o - -obj-$(CONFIG_SPL_BUILD) += spl_start.o -obj-$(CONFIG_SPL_BUILD) += ddr.o - diff --git a/package/boot/uboot-oxnas/src/board/ox820/ddr.c b/package/boot/uboot-oxnas/src/board/ox820/ddr.c deleted file mode 100644 index a665722e3b..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/ddr.c +++ /dev/null @@ -1,477 +0,0 @@ -/******************************************************************* - * - * File: ddr_oxsemi.c - * - * Description: Declarations for DDR routines and data objects - * - * Author: Julien Margetts - * - * Copyright: Oxford Semiconductor Ltd, 2009 - */ -#include -#include - -#include "ddr.h" - -typedef unsigned int UINT; - -// DDR TIMING PARAMETERS -typedef struct { - unsigned int holdoff_cmd_A; - unsigned int holdoff_cmd_ARW; - unsigned int holdoff_cmd_N; - unsigned int holdoff_cmd_LM; - unsigned int holdoff_cmd_R; - unsigned int holdoff_cmd_W; - unsigned int holdoff_cmd_PC; - unsigned int holdoff_cmd_RF; - unsigned int holdoff_bank_R; - unsigned int holdoff_bank_W; - unsigned int holdoff_dir_RW; - unsigned int holdoff_dir_WR; - unsigned int holdoff_FAW; - unsigned int latency_CAS; - unsigned int latency_WL; - unsigned int recovery_WR; - unsigned int width_update; - unsigned int odt_offset; - unsigned int odt_drive_all; - unsigned int use_fixed_re; - unsigned int delay_wr_to_re; - unsigned int wr_slave_ratio; - unsigned int rd_slave_ratio0; - unsigned int rd_slave_ratio1; -} T_DDR_TIMING_PARAMETERS; - -// DDR CONFIG PARAMETERS - -typedef struct { - unsigned int ddr_mode; - unsigned int width; - unsigned int blocs; - unsigned int banks8; - unsigned int rams; - unsigned int asize; - unsigned int speed; - unsigned int cmd_mode_wr_cl_bl; -} T_DDR_CONFIG_PARAMETERS; - -//cmd_mode_wr_cl_bl -//when SDR : cmd_mode_wr_cl_bl = 0x80200002 + (latency_CAS_RAM * 16) + (recovery_WR - 1) * 512; -- Sets write rec XX, CL=XX; BL=8 -//else cmd_mode_wr_cl_bl = 0x80200003 + (latency_CAS_RAM * 16) + (recovery_WR - 1) * 512; -- Sets write rec XX, CL=XX; BL=8 - -// cmd_ bank_ dir_ lat_ rec_ width_ odt_ odt_ fix delay ratio -// A F C update offset all re re_to_we w r0 r1 -// R L P R R W A A W W -//Timing Parameters A W N M R W C F R W W R W S L R -static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25E_CL5_1GB = { 4, 5, 0, 2, 4, 4, - 5, 51, 23, 24, 9, 11, 18, 5, 4, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; //elida device. -static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25E_CL5_2GB = { 4, 5, 0, 2, 4, 4, - 5, 79, 22, 24, 9, 11, 20, 5, 4, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; -static const T_DDR_TIMING_PARAMETERS C_TP_DDR2_25_CL6_1GB = { 4, 5, 0, 2, 4, 4, - 4, 51, 22, 26, 10, 12, 18, 6, 5, 6, 3, 2, 0, 1, 2, 75, 56, 56 }; // 400MHz, Speedgrade 25 timings (1Gb parts) - -// D B B R A S -// D W L K A S P -//Config Parameters R D C 8 M Z D CMD_MODE -//static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25E_CL5 = { 2,16, 1, 0, 1, 32,25,0x80200A53}; // 64 MByte -static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25E_CL5 = { 2, 16, 1, 1, 1, 64, - 25, 0x80200A53 }; // 128 MByte -static const T_DDR_CONFIG_PARAMETERS C_CP_DDR2_25_CL6 = { 2, 16, 1, 1, 1, 128, - 25, 0x80200A63 }; // 256 MByte - -static void ddr_phy_poll_until_locked(void) -{ - volatile UINT reg_tmp = 0; - volatile UINT locked = 0; - - //Extra read to put in delay before starting to poll... - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read - - //POLL C_DDR_PHY2_REG register until clock and flock - //!!! Ideally have a timeout on this. - while (locked == 0) { - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read - - //locked when bits 30 and 31 are set - if (reg_tmp & 0xC0000000) { - locked = 1; - } - } -} - -static void ddr_poll_until_not_busy(void) -{ - volatile UINT reg_tmp = 0; - volatile UINT busy = 1; - - //Extra read to put in delay before starting to poll... - reg_tmp = *(volatile UINT *) C_DDR_STAT_REG; // read - - //POLL DDR_STAT register until no longer busy - //!!! Ideally have a timeout on this. - while (busy == 1) { - reg_tmp = *(volatile UINT *) C_DDR_STAT_REG; // read - - //when bit 31 is clear - core is no longer busy - if ((reg_tmp & 0x80000000) == 0x00000000) { - busy = 0; - } - } -} - -static void ddr_issue_command(int commmand) -{ - *(volatile UINT *) C_DDR_CMD_REG = commmand; - ddr_poll_until_not_busy(); -} - -static void ddr_timing_initialisation( - const T_DDR_TIMING_PARAMETERS *ddr_timing_parameters) -{ - volatile UINT reg_tmp = 0; - /* update the DDR controller registers for timing parameters */ - reg_tmp = (ddr_timing_parameters->holdoff_cmd_A << 0); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_ARW << 4); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_N << 8); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_LM << 12); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_R << 16); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_W << 20); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_cmd_PC << 24); - *(volatile UINT *) C_DDR_REG_TIMING0 = reg_tmp; - - reg_tmp = (ddr_timing_parameters->holdoff_cmd_RF << 0); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_bank_R << 8); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_bank_W << 16); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_dir_RW << 24); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_dir_WR << 28); - *(volatile UINT *) C_DDR_REG_TIMING1 = reg_tmp; - - reg_tmp = (ddr_timing_parameters->latency_CAS << 0); - reg_tmp = reg_tmp + (ddr_timing_parameters->latency_WL << 4); - reg_tmp = reg_tmp + (ddr_timing_parameters->holdoff_FAW << 8); - reg_tmp = reg_tmp + (ddr_timing_parameters->width_update << 16); - reg_tmp = reg_tmp + (ddr_timing_parameters->odt_offset << 21); - reg_tmp = reg_tmp + (ddr_timing_parameters->odt_drive_all << 24); - - *(volatile UINT *) C_DDR_REG_TIMING2 = reg_tmp; - - /* Program the timing parameters in the PHY too */ - reg_tmp = (ddr_timing_parameters->use_fixed_re << 16) - | (ddr_timing_parameters->delay_wr_to_re << 8) - | (ddr_timing_parameters->latency_WL << 4) - | (ddr_timing_parameters->latency_CAS << 0); - - *(volatile UINT *) C_DDR_REG_PHY_TIMING = reg_tmp; - - reg_tmp = ddr_timing_parameters->wr_slave_ratio; - - *(volatile UINT *) C_DDR_REG_PHY_WR_RATIO = reg_tmp; - - reg_tmp = ddr_timing_parameters->rd_slave_ratio0; - reg_tmp += ddr_timing_parameters->rd_slave_ratio1 << 8; - - *(volatile UINT *) C_DDR_REG_PHY_RD_RATIO = reg_tmp; - -} - -static void ddr_normal_initialisation( - const T_DDR_CONFIG_PARAMETERS *ddr_config_parameters, int mhz) -{ - int i; - volatile UINT tmp = 0; - volatile UINT reg_tmp = 0; - volatile UINT emr_cmd = 0; - UINT refresh; - - //Total size of memory in Mbits... - tmp = ddr_config_parameters->rams * ddr_config_parameters->asize - * ddr_config_parameters->width; - //Deduce value to program into DDR_CFG register... - switch (tmp) { - case 16: - reg_tmp = 0x00020000 * 1; - break; - case 32: - reg_tmp = 0x00020000 * 2; - break; - case 64: - reg_tmp = 0x00020000 * 3; - break; - case 128: - reg_tmp = 0x00020000 * 4; - break; - case 256: - reg_tmp = 0x00020000 * 5; - break; - case 512: - reg_tmp = 0x00020000 * 6; - break; - case 1024: - reg_tmp = 0x00020000 * 7; - break; - case 2048: - reg_tmp = 0x00020000 * 8; - break; - default: - reg_tmp = 0; //forces sims not to work if badly configured - } - - //Memory width - tmp = ddr_config_parameters->rams * ddr_config_parameters->width; - switch (tmp) { - case 8: - reg_tmp = reg_tmp + 0x00400000; - break; - case 16: - reg_tmp = reg_tmp + 0x00200000; - break; - case 32: - reg_tmp = reg_tmp + 0x00000000; - break; - default: - reg_tmp = 0; //forces sims not to work if badly configured - } - - //Setup DDR Mode - switch (ddr_config_parameters->ddr_mode) { - case 0: - reg_tmp = reg_tmp + 0x00000000; - break; //SDR - case 1: - reg_tmp = reg_tmp + 0x40000000; - break; //DDR - case 2: - reg_tmp = reg_tmp + 0x80000000; - break; //DDR2 - default: - reg_tmp = 0; //forces sims not to work if badly configured - } - - //Setup Banks - if (ddr_config_parameters->banks8 == 1) { - reg_tmp = reg_tmp + 0x00800000; - } - - //Program DDR_CFG register... - *(volatile UINT *) C_DDR_CFG_REG = reg_tmp; - - //Configure PHY0 reg - se_mode is bit 1, - //needs to be 1 for DDR (single_ended drive) - switch (ddr_config_parameters->ddr_mode) { - case 0: - reg_tmp = 2 + (0 << 4); - break; //SDR - case 1: - reg_tmp = 2 + (4 << 4); - break; //DDR - case 2: - reg_tmp = 0 + (4 << 4); - break; //DDR2 - default: - reg_tmp = 0; - } - - //Program DDR_PHY0 register... - *(volatile UINT *) C_DDR_REG_PHY0 = reg_tmp; - - //Read DDR_PHY* registers to exercise paths for vcd - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY3; - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY1; - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY0; - - //Start up sequences - Different dependant on DDR mode - switch (ddr_config_parameters->ddr_mode) { - case 2: //DDR2 - //Start-up sequence: follows procedure described in Micron datasheet. - //start up DDR PHY DLL - reg_tmp = 0x00022828; // dll on, start point and inc = h28 - *(volatile UINT *) C_DDR_REG_PHY2 = reg_tmp; - - reg_tmp = 0x00032828; // start on, dll on, start point and inc = h28 - *(volatile UINT *) C_DDR_REG_PHY2 = reg_tmp; - - ddr_phy_poll_until_locked(); - - udelay(200); //200us - - //Startup SDRAM... - //!!! Software: CK should be running for 200us before wake-up - ddr_issue_command( C_CMD_WAKE_UP); - ddr_issue_command( C_CMD_NOP); - ddr_issue_command( C_CMD_PRECHARGE_ALL); - ddr_issue_command( C_CMD_DDR2_EMR2); - ddr_issue_command( C_CMD_DDR2_EMR3); - - emr_cmd = C_CMD_DDR2_EMR1 + C_CMD_ODT_75 + C_CMD_REDUCED_DRIVE - + C_CMD_ENABLE_DLL; - - ddr_issue_command(emr_cmd); - //Sets CL=3; BL=8 but also reset DLL to trigger a DLL initialisation... - udelay(1); //1us - ddr_issue_command( - ddr_config_parameters->cmd_mode_wr_cl_bl - + C_CMD_RESET_DLL); - udelay(1); //1us - - //!!! Software: Wait 200 CK cycles before... - //for(i=1; i<=2; i++) { - ddr_issue_command(C_CMD_PRECHARGE_ALL); - // !!! Software: Wait here at least 8 CK cycles - //} - //need a wait here to ensure PHY DLL lock before the refresh is issued - udelay(1); //1us - for (i = 1; i <= 2; i++) { - ddr_issue_command( C_CMD_AUTO_REFRESH); - //!!! Software: Wait here at least 8 CK cycles to satify tRFC - udelay(1); //1us - } - //As before but without 'RESET_DLL' bit set... - ddr_issue_command(ddr_config_parameters->cmd_mode_wr_cl_bl); - udelay(1); //1us - // OCD commands - ddr_issue_command(emr_cmd + C_CMD_MODE_DDR2_OCD_DFLT); - ddr_issue_command(emr_cmd + C_CMD_MODE_DDR2_OCD_EXIT); - break; - - default: - break; //Do nothing - } - - //Enable auto-refresh - - // 8192 Refreshes required every 64ms, so maximum refresh period is 7.8125 us - // We have a 400 MHz DDR clock (2.5ns period) so max period is 3125 cycles - // Our core now does 8 refreshes in a go, so we multiply this period by 8 - - refresh = (64000 * mhz) / 8192; // Refresh period in clocks - - reg_tmp = *(volatile UINT *) C_DDR_CFG_REG; // read -#ifdef BURST_REFRESH_ENABLE - reg_tmp |= C_CFG_REFRESH_ENABLE | (refresh * 8); - reg_tmp |= C_CFG_BURST_REFRESH_ENABLE; -#else - reg_tmp |= C_CFG_REFRESH_ENABLE | (refresh * 1); - reg_tmp &= ~C_CFG_BURST_REFRESH_ENABLE; -#endif - *(volatile UINT *) C_DDR_CFG_REG = reg_tmp; - - //Verify register contents - reg_tmp = *(volatile UINT *) C_DDR_REG_PHY2; // read - //printf("Warning XXXXXXXXXXXXXXXXXXXXXX - get bad read data from C_DDR_PHY2_REG, though it looks OK on bus XXXXXXXXXXXXXXXXXX"); - //TBD Check_data (read_data, dll_reg, "Error: bad C_DDR_PHY2_REG read", tb_pass); - reg_tmp = *(volatile UINT *) C_DDR_CFG_REG; // read - //TBD Check_data (read_data, cfg_reg, "Error: bad DDR_CFG read", tb_pass); - - //disable optimised wrapping - if (ddr_config_parameters->ddr_mode == 2) { - reg_tmp = 0xFFFF0000; - *(volatile UINT *) C_DDR_REG_IGNORE = reg_tmp; - } - - //enable midbuffer followon - reg_tmp = *(volatile UINT *) C_DDR_ARB_REG; // read - reg_tmp = 0xFFFF0000 | reg_tmp; - *(volatile UINT *) C_DDR_ARB_REG = reg_tmp; - - // Enable write behind coherency checking for all clients - - reg_tmp = 0xFFFF0000; - *(volatile UINT *) C_DDR_AHB4_REG = reg_tmp; - - //Wait for 200 clock cycles for SDRAM DLL to lock... - udelay(1); //1us -} - -// Function used to Setup DDR core - -void ddr_setup(int mhz) -{ - static const T_DDR_TIMING_PARAMETERS *ddr_timing_parameters = - &C_TP_DDR2_25_CL6_1GB; - static const T_DDR_CONFIG_PARAMETERS *ddr_config_parameters = - &C_CP_DDR2_25_CL6; - - //Bring core out of Reset - *(volatile UINT *) C_DDR_BLKEN_REG = C_BLKEN_DDR_ON; - - //DDR TIMING INITIALISTION - ddr_timing_initialisation(ddr_timing_parameters); - - //DDR NORMAL INITIALISATION - ddr_normal_initialisation(ddr_config_parameters, mhz); - - // route all writes through one client - *(volatile UINT *) C_DDR_TRANSACTION_ROUTING = (0 - << DDR_ROUTE_CPU0_INSTR_SHIFT) - | (1 << DDR_ROUTE_CPU0_RDDATA_SHIFT) - | (3 << DDR_ROUTE_CPU0_WRDATA_SHIFT) - | (2 << DDR_ROUTE_CPU1_INSTR_SHIFT) - | (3 << DDR_ROUTE_CPU1_RDDATA_SHIFT) - | (3 << DDR_ROUTE_CPU1_WRDATA_SHIFT); - - //Bring all clients out of reset - *(volatile UINT *) C_DDR_BLKEN_REG = C_BLKEN_DDR_ON + 0x0000FFFF; - -} - -void set_ddr_timing(unsigned int w, unsigned int i) -{ - unsigned int reg; - unsigned int wnow = 16; - unsigned int inow = 32; - - /* reset all timing controls to known value (31) */ - writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST, DDR_PHY_TIMING); - writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST | DDR_PHY_TIMING_CK, - DDR_PHY_TIMING); - writel(DDR_PHY_TIMING_W_RST | DDR_PHY_TIMING_I_RST, DDR_PHY_TIMING); - - /* step up or down read delay to the requested value */ - while (wnow != w) { - if (wnow < w) { - reg = DDR_PHY_TIMING_INC; - wnow++; - } else { - reg = 0; - wnow--; - } - writel(DDR_PHY_TIMING_W_CE | reg, DDR_PHY_TIMING); - writel(DDR_PHY_TIMING_CK | DDR_PHY_TIMING_W_CE | reg, - DDR_PHY_TIMING); - writel(DDR_PHY_TIMING_W_CE | reg, DDR_PHY_TIMING); - } - - /* now write delay */ - while (inow != i) { - if (inow < i) { - reg = DDR_PHY_TIMING_INC; - inow++; - } else { - reg = 0; - inow--; - } - writel(DDR_PHY_TIMING_I_CE | reg, DDR_PHY_TIMING); - writel(DDR_PHY_TIMING_CK | DDR_PHY_TIMING_I_CE | reg, - DDR_PHY_TIMING); - writel(DDR_PHY_TIMING_I_CE | reg, DDR_PHY_TIMING); - } -} - -//Function used to Setup SDRAM in DDR/SDR mode -void init_ddr(int mhz) -{ - /* start clocks */ - enable_clock(SYS_CTRL_CLK_DDRPHY); - enable_clock(SYS_CTRL_CLK_DDR); - enable_clock(SYS_CTRL_CLK_DDRCK); - - /* bring phy and core out of reset */ - reset_block(SYS_CTRL_RST_DDR_PHY, 0); - reset_block(SYS_CTRL_RST_DDR, 0); - - /* DDR runs at half the speed of the CPU */ - ddr_setup(mhz >> 1); - return; -} diff --git a/package/boot/uboot-oxnas/src/board/ox820/ddr.h b/package/boot/uboot-oxnas/src/board/ox820/ddr.h deleted file mode 100644 index a3c199019c..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/ddr.h +++ /dev/null @@ -1,148 +0,0 @@ -/******************************************************************* -* -* File: ddr_oxsemi.h -* -* Description: Declarations for DDR routines and data objects -* -* Author: Julien Margetts -* -* Copyright: Oxford Semiconductor Ltd, 2009 -*/ - -void ddr_oxsemi_setup(int mhz); - -/* define to refresh in bursts of 8 */ -#define BURST_REFRESH_ENABLE - -#define DDR_BASE 0x44700000 - -#define C_DDR_CFG_REG (DDR_BASE + 0x00) -#define C_CFG_DDR 0x80000000 -#define C_CFG_SDR 0x00000000 -#define C_CFG_WIDTH8 0x00200000 -#define C_CFG_WIDTH16 0x00100000 -#define C_CFG_WIDTH32 0x00000000 -#define C_CFG_SIZE_FACTOR 0x00020000 -#define C_CFG_REFRESH_ENABLE 0x00010000 -#define C_CFG_BURST_REFRESH_ENABLE 0x01000000 -#define C_CFG_SIZE(x) (x << 17) -#define CFG_SIZE_2MB 1 -#define CFG_SIZE_4MB 2 -#define CFG_SIZE_8MB 3 -#define CFG_SIZE_16MB 4 -#define CFG_SIZE_32MB 5 -#define CFG_SIZE_64MB 6 -#define CFG_SIZE_128MB 7 - -#define C_DDR_BLKEN_REG (DDR_BASE + 0x04) -#define C_BLKEN_DDR_ON 0x80000000 - -#define C_DDR_STAT_REG (DDR_BASE + 0x08) - -#define C_DDR_CMD_REG (DDR_BASE + 0x0C) -#define C_CMD_SEND_COMMAND (1UL << 31) | (1 << 21) // RAS/CAS/WE/CS all low(active), CKE High, indicates -#define C_CMD_WAKE_UP 0x80FC0000 // Asserts CKE -#define C_CMD_MODE_SDR 0x80200022 // Sets CL=2 BL=4 -#define C_CMD_MODE_DDR 0x80200063 // Sets CL=2.5 BL=8 -#define C_CMD_RESET_DLL 0x00000100 // A8=1 Use in conjunction with C_CMD_MODE_DDR -#define C_CMD_PRECHARGE_ALL 0x80280400 -#define C_CMD_AUTO_REFRESH 0x80240000 -#define C_CMD_SELF_REFRESH 0x80040000 // As AUTO-REFRESH but with CKE low -#define C_CMD_NOP 0x803C0000 // NOP just to insert guaranteed delay -#define C_CMD_DDR2_EMR1 0x80210000 // Load extended mode register 1 with zeros (for init), CKE still set -//#define C_CMD_DDR2_EMR1 0x80210400 // Load extended mode register 1 with zeros (for init), CKE still set -#define C_CMD_ENABLE_DLL 0x00000000 // Values used in conjuction with C_CMD_DDR2_EMR1 -#define C_CMD_DISABLE_DLL 0x00000001 -#define C_CMD_REDUCED_DRIVE 0x00000002 -#define C_CMD_ODT_DISABLED 0x00000000 -#define C_CMD_ODT_50 0x00000044 -#define C_CMD_ODT_75 0x00000004 -#define C_CMD_ODT_150 0x00000040 -#define C_CMD_MODE_DDR2_OCD_DFLT 0x00000380 -#define C_CMD_MODE_DDR2_OCD_EXIT 0x00000000 - -#define C_CMD_DDR2_EMR2 0x80220000 // Load extended mode register 2 with zeros (for init), CKE still set -#define C_CMD_DDR2_EMR3 0x80230000 // Load extended mode register 3 with zeros (for init), CKE still set - -#define C_DDR_AHB_REG (DDR_BASE + 0x10) -#define C_AHB_NO_RCACHES 0xFFFF0000 -#define C_AHB_FLUSH_ALL_RCACHES 0x0000FFFF -#define C_AHB_FLUSH_AHB0_RCACHE 0x00000001 -#define C_AHB_FLUSH_AHB1_RCACHE 0x00000002 - -#define C_DDR_DLL_REG (DDR_BASE + 0x14) -#define C_DLL_DISABLED 0x00000000 -#define C_DLL_MANUAL 0x80000000 -#define C_DLL_AUTO_OFFSET 0xA0000000 -#define C_DLL_AUTO_IN_REFRESH 0xC0000000 -#define C_DLL_AUTOMATIC 0xE0000000 - -#define C_DDR_MON_REG (DDR_BASE + 0x18) -#define C_MON_ALL 0x00000010 -#define C_MON_CLIENT 0x00000000 - -#define C_DDR_DIAG_REG (DDR_BASE + 0x1C) -#define C_DDR_DIAG2_REG (DDR_BASE + 0x20) - -#define C_DDR_IOC_REG (DDR_BASE + 0x24) -#define C_DDR_IOC_PWR_DWN (1 << 10) -#define C_DDR_IOC_SEL_SSTL (1 << 9) -#define C_DDR_IOC_CK_DRIVE(x) ((x) << 6) -#define C_DDR_IOC_DQ_DRIVE(x) ((x) << 3) -#define C_DDR_IOC_XX_DRIVE(x) ((x) << 0) - -#define C_DDR_ARB_REG (DDR_BASE + 0x28) -#define C_DDR_ARB_MIDBUF (1 << 4) -#define C_DDR_ARB_LRUBANK (1 << 3) -#define C_DDR_ARB_REQAGE (1 << 2) -#define C_DDR_ARB_DATDIR (1 << 1) -#define C_DDR_ARB_DATDIR_NC (1 << 0) - -#define C_TOP_ADDRESS_BIT_TEST 22 -#define C_MEM_BASE C_SDRAM_BASE - -#define C_MEM_TEST_BASE 0 -#define C_MEM_TEST_LEN 1920 -#define C_MAX_RAND_ACCESS_LEN 16 - -#define C_DDR_REG_IGNORE (DDR_BASE + 0x2C) -#define C_DDR_AHB4_REG (DDR_BASE + 0x44) - -#define C_DDR_REG_TIMING0 (DDR_BASE + 0x34) -#define C_DDR_REG_TIMING1 (DDR_BASE + 0x38) -#define C_DDR_REG_TIMING2 (DDR_BASE + 0x3C) - -#define C_DDR_REG_PHY0 (DDR_BASE + 0x48) -#define C_DDR_REG_PHY1 (DDR_BASE + 0x4C) -#define C_DDR_REG_PHY2 (DDR_BASE + 0x50) -#define C_DDR_REG_PHY3 (DDR_BASE + 0x54) - -#define C_DDR_REG_GENERIC (DDR_BASE + 0x60) - -#define C_OXSEMI_DDRC_SIGNATURE 0x054415AA - -#define DDR_PHY_BASE (DDR_BASE + 0x80000) -#define DDR_PHY_TIMING (DDR_PHY_BASE + 0x48) -#define DDR_PHY_TIMING_CK (1 << 12) -#define DDR_PHY_TIMING_INC (1 << 13) -#define DDR_PHY_TIMING_W_CE (1 << 14) -#define DDR_PHY_TIMING_W_RST (1 << 15) -#define DDR_PHY_TIMING_I_CE (1 << 16) -#define DDR_PHY_TIMING_I_RST (1 << 17) - -#define C_DDR_REG_PHY_TIMING (DDR_PHY_BASE + 0x50) -#define C_DDR_REG_PHY_WR_RATIO (DDR_PHY_BASE + 0x74) -#define C_DDR_REG_PHY_RD_RATIO (DDR_PHY_BASE + 0x78) - -#define C_DDR_TRANSACTION_ROUTING (DDR_PHY_BASE + 0xC8) -#define DDR_ROUTE_CPU0_INSTR_SHIFT 0 -#define DDR_ROUTE_CPU0_RDDATA_SHIFT 4 -#define DDR_ROUTE_CPU0_WRDATA_SHIFT 6 -#define DDR_ROUTE_CPU1_INSTR_SHIFT 8 -#define DDR_ROUTE_CPU1_RDDATA_SHIFT 12 -#define DDR_ROUTE_CPU1_WRDATA_SHIFT 14 - -unsigned int ddrc_signature(void); -void set_ddr_timing(unsigned int w, unsigned int i); -int pause(unsigned int us); -void set_ddr_sel(int val); diff --git a/package/boot/uboot-oxnas/src/board/ox820/lowlevel_init.S b/package/boot/uboot-oxnas/src/board/ox820/lowlevel_init.S deleted file mode 100644 index 3328b7aa86..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/lowlevel_init.S +++ /dev/null @@ -1,20 +0,0 @@ -#include -#ifndef CONFIG_SPL_BUILD - -.globl lowlevel_init -lowlevel_init: - /* - * Copy exception table to relocated address in internal SRAM - */ - ldr r0, src /* Address of exception table in flash */ - ldr r1, dest /* Relocated address of exception table */ - ldmia r0!, {r3-r10} /* Copy exception table and jump values from */ - stmia r1!, {r3-r10} /* FLASH to relocated address */ - ldmia r0!, {r3-r10} - stmia r1!, {r3-r10} - mov pc, lr - -src: .word CONFIG_SYS_TEXT_BASE -dest: .word CONFIG_SRAM_BASE - -#endif \ No newline at end of file diff --git a/package/boot/uboot-oxnas/src/board/ox820/ox820.c b/package/boot/uboot-oxnas/src/board/ox820/ox820.c deleted file mode 100644 index f93cc9ca58..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/ox820.c +++ /dev/null @@ -1,374 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_SPL_BUILD - -#ifdef DEBUG -#define DILIGENCE (1048576/4) -static int test_memory(u32 memory) -{ - volatile u32 *read; - volatile u32 *write; - const u32 INIT_PATTERN = 0xAA55AA55; - const u32 INC_PATTERN = 0x01030507; - u32 pattern; - int check; - int i; - - check = 0; - read = write = (volatile u32 *) memory; - pattern = INIT_PATTERN; - for (i = 0; i < DILIGENCE; i++) { - *write++ = pattern; - pattern += INC_PATTERN; - } - puts("testing\n"); - pattern = INIT_PATTERN; - for (i = 0; i < DILIGENCE; i++) { - check += (pattern == *read++) ? 1 : 0; - pattern += INC_PATTERN; - } - return (check == DILIGENCE) ? 0 : -1; -} -#endif - -void uart_init(void) -{ - /* Reset UART1 */ - reset_block(SYS_CTRL_RST_UART1, 1); - udelay(100); - reset_block(SYS_CTRL_RST_UART1, 0); - udelay(100); - - /* Setup pin mux'ing for UART1 */ - pinmux_set(PINMUX_BANK_MFA, 30, PINMUX_UARTA_SIN); - pinmux_set(PINMUX_BANK_MFA, 31, PINMUX_UARTA_SOUT); -} - -extern void init_ddr(int mhz); - -void board_inithw(void) -{ - int plla_freq; -#ifdef DEBUG - int i; -#endif /* DEBUG */ - - timer_init(); - uart_init(); - preloader_console_init(); - - plla_freq = plla_set_config(CONFIG_PLLA_FREQ_MHZ); - init_ddr(plla_freq); - -#ifdef DEBUG - if(test_memory(CONFIG_SYS_SDRAM_BASE)) { - puts("memory test failed\n"); - } else { - puts("memory test done\n"); - } -#endif /* DEBUG */ -#ifdef CONFIG_SPL_BSS_DRAM_START - extern char __bss_dram_start[]; - extern char __bss_dram_end[]; - memset(&__bss_dram_start, 0, __bss_dram_end - __bss_dram_start); -#endif -} - -void board_init_f(ulong dummy) -{ - /* Set the stack pointer. */ - asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK)); - - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - - /* Set global data pointer. */ - gd = &gdata; - - board_inithw(); - - board_init_r(NULL, 0); -} - -u32 spl_boot_device(void) -{ - return CONFIG_SPL_BOOT_DEVICE; -} - -#ifdef CONFIG_SPL_BLOCK_SUPPORT -void spl_block_device_init(void) -{ - ide_init(); -} -#endif - -#ifdef CONFIG_SPL_OS_BOOT -int spl_start_uboot(void) -{ - /* break into full u-boot on 'c' */ - return (serial_tstc() && serial_getc() == 'c'); -} -#endif - -void spl_display_print(void) -{ - /* print a hint, so that we will not use the wrong SPL by mistake */ - puts(" Boot device: " BOOT_DEVICE_TYPE "\n" ); -} - -void lowlevel_init(void) -{ -} - -#ifdef USE_DL_PREFIX -/* quick and dirty memory allocation */ -static ulong next_mem = CONFIG_SPL_MALLOC_START; - -void *memalign(size_t alignment, size_t bytes) -{ - ulong mem = ALIGN(next_mem, alignment); - - next_mem = mem + bytes; - - if (next_mem > CONFIG_SYS_SDRAM_BASE + CONFIG_MIN_SDRAM_SIZE) { - printf("spl: out of memory\n"); - hang(); - } - - return (void *)mem; -} - -void free(void* mem) -{ -} -#endif - -#endif /* CONFIG_SPL_BUILD */ - -int board_early_init_f(void) -{ - return 0; -} - -#define STATIC_CTL_BANK0 (STATIC_CONTROL_BASE + 4) -#define STATIC_READ_CYCLE_SHIFT 0 -#define STATIC_DELAYED_OE (1 << 7) -#define STATIC_WRITE_CYCLE_SHIFT 8 -#define STATIC_WRITE_PULSE_SHIFT 16 -#define STATIC_WRITE_BURST_EN (1 << 23) -#define STATIC_TURN_AROUND_SHIFT 24 -#define STATIC_BUFFER_PRESENT (1 << 28) -#define STATIC_READ_BURST_EN (1 << 29) -#define STATIC_BUS_WIDTH8 (0 << 30) -#define STATIC_BUS_WIDTH16 (1 << 30) -#define STATIC_BUS_WIDTH32 (2 << 30) - -void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; - - if (ctrl & NAND_CTRL_CHANGE) { - nandaddr &= ~(BIT(NAND_ALE_ADDR_PIN) | BIT(NAND_CLE_ADDR_PIN)); - if (ctrl & NAND_CLE) - nandaddr |= BIT(NAND_CLE_ADDR_PIN); - else if (ctrl & NAND_ALE) - nandaddr |= BIT(NAND_ALE_ADDR_PIN); - this->IO_ADDR_W = (void __iomem *) nandaddr; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, (void __iomem *) nandaddr); -} - -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_BOOT_FROM_NAND) - -int nand_dev_ready(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - udelay(chip->chip_delay); - - return 1; -} - -void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) - buf[i] = readb(chip->IO_ADDR_R); -} - -void nand_dev_reset(struct nand_chip *chip) -{ - writeb(NAND_CMD_RESET, chip->IO_ADDR_W + BIT(NAND_CLE_ADDR_PIN)); - udelay(chip->chip_delay); - writeb(NAND_CMD_STATUS, chip->IO_ADDR_W + BIT(NAND_CLE_ADDR_PIN)); - while (!(readb(chip->IO_ADDR_R) & NAND_STATUS_READY)) { - ; - } -} - -#else - -#define nand_dev_reset(chip) /* framework will reset the chip anyway */ -#define nand_read_buf NULL /* framework will provide a default one */ -#define nand_dev_ready NULL /* dev_ready is optional */ - -#endif - -int board_nand_init(struct nand_chip *chip) -{ - /* Block reset Static core */ - reset_block(SYS_CTRL_RST_STATIC, 1); - reset_block(SYS_CTRL_RST_STATIC, 0); - - /* Enable clock to Static core */ - enable_clock(SYS_CTRL_CLK_STATIC); - - /* enable flash support on static bus. - * Enable static bus onto GPIOs, only CS0 */ - pinmux_set(PINMUX_BANK_MFA, 12, PINMUX_STATIC_DATA0); - pinmux_set(PINMUX_BANK_MFA, 13, PINMUX_STATIC_DATA1); - pinmux_set(PINMUX_BANK_MFA, 14, PINMUX_STATIC_DATA2); - pinmux_set(PINMUX_BANK_MFA, 15, PINMUX_STATIC_DATA3); - pinmux_set(PINMUX_BANK_MFA, 16, PINMUX_STATIC_DATA4); - pinmux_set(PINMUX_BANK_MFA, 17, PINMUX_STATIC_DATA5); - pinmux_set(PINMUX_BANK_MFA, 18, PINMUX_STATIC_DATA6); - pinmux_set(PINMUX_BANK_MFA, 19, PINMUX_STATIC_DATA7); - - pinmux_set(PINMUX_BANK_MFA, 20, PINMUX_STATIC_NWE); - pinmux_set(PINMUX_BANK_MFA, 21, PINMUX_STATIC_NOE); - pinmux_set(PINMUX_BANK_MFA, 22, PINMUX_STATIC_NCS); - pinmux_set(PINMUX_BANK_MFA, 23, PINMUX_STATIC_ADDR18); - pinmux_set(PINMUX_BANK_MFA, 24, PINMUX_STATIC_ADDR19); - - /* Setup the static bus CS0 to access FLASH */ - - writel((0x3f << STATIC_READ_CYCLE_SHIFT) - | (0x3f << STATIC_WRITE_CYCLE_SHIFT) - | (0x1f << STATIC_WRITE_PULSE_SHIFT) - | (0x03 << STATIC_TURN_AROUND_SHIFT) | - STATIC_BUS_WIDTH16, - STATIC_CTL_BANK0); - - chip->cmd_ctrl = nand_hwcontrol; - chip->ecc.mode = NAND_ECC_SOFT; - chip->chip_delay = 30; - chip->dev_ready = nand_dev_ready; - chip->read_buf = nand_read_buf; - - nand_dev_reset(chip); - - return 0; -} - -int board_init(void) -{ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - gd->bd->bi_arch_number = MACH_TYPE_OXNAS; - - /* assume uart is already initialized by SPL */ - -#if defined(CONFIG_START_IDE) - puts("IDE: "); - ide_init(); -#endif - - return 0; -} - -/* copied from board/evb64260/sdram_init.c */ -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -static long int dram_size (long int *base, long int maxsize) -{ - volatile long int *addr, *b = base; - long int cnt, val, save1, save2; - -#define STARTVAL (CONFIG_MIN_SDRAM_SIZE / 2) /* start test at half size */ - for (cnt = STARTVAL / sizeof (long); cnt < maxsize / sizeof (long); - cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - save1 = *addr; /* save contents of addr */ - save2 = *b; /* save contents of base */ - - *addr = cnt; /* write cnt to addr */ - *b = 0; /* put null at base */ - - /* check at base address */ - if ((*b) != 0) { - *addr = save1; /* restore *addr */ - *b = save2; /* restore *b */ - return (0); - } - val = *addr; /* read *addr */ - - *addr = save1; - *b = save2; - - if (val != cnt) { - /* fix boundary condition.. STARTVAL means zero */ - if (cnt == STARTVAL / sizeof (long)) - cnt = 0; - return (cnt * sizeof (long)); - } - } - return maxsize; -} - -int dram_init(void) -{ - gd->ram_size = dram_size((long int *)CONFIG_SYS_SDRAM_BASE, - CONFIG_MAX_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - u32 value; - - /* set the pin multiplexers to enable talking to Ethernent Phys */ - pinmux_set(PINMUX_BANK_MFA, 3, PINMUX_MACA_MDC); - pinmux_set(PINMUX_BANK_MFA, 4, PINMUX_MACA_MDIO); - - // Ensure the MAC block is properly reset - reset_block(SYS_CTRL_RST_MAC, 1); - udelay(10); - reset_block(SYS_CTRL_RST_MAC, 0); - - // Enable the clock to the MAC block - enable_clock(SYS_CTRL_CLK_MAC); - - value = readl(SYS_CTRL_GMAC_CTRL); - /* Use simple mux for 25/125 Mhz clock switching */ - value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX); - /* Enable GMII_GTXCLK to follow GMII_REFCLK - required for gigabit PHY */ - value |= BIT(SYS_CTRL_GMAC_CKEN_GTX); - /* set auto tx speed */ - value |= BIT(SYS_CTRL_GMAC_AUTOSPEED); - - writel(value, SYS_CTRL_GMAC_CTRL); - - return designware_initialize(MAC_BASE, PHY_INTERFACE_MODE_RGMII); -} - diff --git a/package/boot/uboot-oxnas/src/board/ox820/spl_start.S b/package/boot/uboot-oxnas/src/board/ox820/spl_start.S deleted file mode 100644 index 2eab3f56d8..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/spl_start.S +++ /dev/null @@ -1,21 +0,0 @@ -.section .init -.globl _spl_start -_spl_start: - b _start - b _start+0x4 - b _start+0x8 - b _start+0xc - b _start+0x10 - b _start+0x14 - b _start+0x18 - b _start+0x1c - .space 0x30 - (. - _spl_start) - .ascii "BOOT" /* 0x30 signature*/ - .word 0x50 /* 0x34 header size itself */ - .word 0 /* 0x38 */ - .word 0x5000f000 /* boot report location */ - .word _start /* 0x40 */ - -main_crc_size: .word code_size /* 0x44 filled by linker */ -main_crc: .word 0 /* 0x48 fill later */ -header_crc: .word 0 /* 0x4C header crc*/ diff --git a/package/boot/uboot-oxnas/src/board/ox820/u-boot-spl.lds b/package/boot/uboot-oxnas/src/board/ox820/u-boot-spl.lds deleted file mode 100644 index a8d90dfba7..0000000000 --- a/package/boot/uboot-oxnas/src/board/ox820/u-boot-spl.lds +++ /dev/null @@ -1,101 +0,0 @@ -/* - * Copyright (C) 2011 Marek Vasut - * on behalf of DENX Software Engineering GmbH - * - * January 2004 - Changed to support H4 device - * Copyright (c) 2004-2008 Texas Instruments - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -MEMORY -{ - sram (rwx) : ORIGIN = CONFIG_SPL_TEXT_BASE, LENGTH = CONFIG_SPL_MAX_SIZE - dram : ORIGIN = CONFIG_SPL_BSS_DRAM_START, LENGTH = CONFIG_SPL_BSS_DRAM_SIZE -} - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_spl_start) -SECTIONS -{ - .text.0 : - { - *(.init*) - } - - - /* Start of the rest of the SPL */ - code_start = . ; - - .text.1 : - { - *(.text*) - } - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - - . = ALIGN(4); - .data : { - *(.data*) - } - - . = ALIGN(4); - - __image_copy_end = .; - code_size = . - code_start; - - .rel.dyn : { - __rel_dyn_start = .; - *(.rel*) - __rel_dyn_end = .; - } - - . = ALIGN(0x800); - - _end = .; - - .bss.sram __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss.stdio_devices) - *(.bss.serial_current) - . = ALIGN(4); - __bss_end = .; - } - - .bss : { - __bss_dram_start = .; - *(.bss*) - __bss_dram_end = .; - } > dram - - /DISCARD/ : { *(.bss*) } - /DISCARD/ : { *(.dynsym) } - /DISCARD/ : { *(.dynstr*) } - /DISCARD/ : { *(.dynsym*) } - /DISCARD/ : { *(.dynamic*) } - /DISCARD/ : { *(.hash*) } - /DISCARD/ : { *(.plt*) } - /DISCARD/ : { *(.interp*) } - /DISCARD/ : { *(.gnu*) } -} diff --git a/package/boot/uboot-oxnas/src/common/env_ext4.c b/package/boot/uboot-oxnas/src/common/env_ext4.c deleted file mode 100644 index e98d94dae9..0000000000 --- a/package/boot/uboot-oxnas/src/common/env_ext4.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * (c) Copyright 2011 by Tigris Elektronik GmbH - * - * Author: - * Maximilian Schwerin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#include -#include -#include -#include -#include -#include -#include - -char *env_name_spec = "EXT4"; - -env_t *env_ptr; - -DECLARE_GLOBAL_DATA_PTR; - -int env_init(void) -{ - /* use default */ - gd->env_addr = (ulong)&default_environment[0]; - gd->env_valid = 1; - - return 0; -} - -#ifdef CONFIG_CMD_SAVEENV -int saveenv(void) -{ - env_t env_new; - ssize_t len; - char *res; - block_dev_desc_t *dev_desc = NULL; - int dev = EXT4_ENV_DEVICE; - int part = EXT4_ENV_PART; - int err; - - res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); - if (len < 0) { - error("Cannot export environment: errno = %d\n", errno); - return 1; - } - - dev_desc = get_dev(EXT4_ENV_INTERFACE, dev); - if (dev_desc == NULL) { - printf("Failed to find %s%d\n", - EXT4_ENV_INTERFACE, dev); - return 1; - } - - err = ext4_register_device(dev_desc, part); - if (err) { - printf("Failed to register %s%d:%d\n", - EXT4_ENV_INTERFACE, dev, part); - return 1; - } - - env_new.crc = crc32(0, env_new.data, ENV_SIZE); - err = ext4fs_write(EXT4_ENV_FILE, (void *)&env_new, sizeof(env_t)); - ext4fs_close(); - if (err == -1) { - printf("\n** Unable to write \"%s\" from %s%d:%d **\n", - EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part); - return 1; - } - - puts("done\n"); - return 0; -} -#endif /* CONFIG_CMD_SAVEENV */ - -void env_relocate_spec(void) -{ - char buf[CONFIG_ENV_SIZE]; - block_dev_desc_t *dev_desc = NULL; - int dev = EXT4_ENV_DEVICE; - int part = EXT4_ENV_PART; - int err; - - dev_desc = get_dev(EXT4_ENV_INTERFACE, dev); - if (dev_desc == NULL) { - printf("Failed to find %s%d\n", - EXT4_ENV_INTERFACE, dev); - set_default_env(NULL); - return; - } - - err = ext4_register_device(dev_desc, part); - if (err) { - printf("Failed to register %s%d:%d\n", - EXT4_ENV_INTERFACE, dev, part); - set_default_env(NULL); - return; - } - - err = ext4_read_file(EXT4_ENV_FILE, (uchar *)&buf, 0, CONFIG_ENV_SIZE); - ext4fs_close(); - - if (err == -1) { - printf("\n** Unable to read \"%s\" from %s%d:%d **\n", - EXT4_ENV_FILE, EXT4_ENV_INTERFACE, dev, part); - set_default_env(NULL); - return; - } - - env_import(buf, 1); -} diff --git a/package/boot/uboot-oxnas/src/common/spl/spl_block.c b/package/boot/uboot-oxnas/src/common/spl/spl_block.c deleted file mode 100644 index f16413aff7..0000000000 --- a/package/boot/uboot-oxnas/src/common/spl/spl_block.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2013 - * - * Ma Haijun - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include - -/* should be implemented by board */ -extern void spl_block_device_init(void); - -block_dev_desc_t * spl_get_block_device(void) -{ - block_dev_desc_t * device; - - spl_block_device_init(); - - device = get_dev(CONFIG_SPL_BLOCKDEV_INTERFACE, CONFIG_SPL_BLOCKDEV_ID); - if (!device) { - printf("blk device %s%d not exists\n", - CONFIG_SPL_BLOCKDEV_INTERFACE, - CONFIG_SPL_BLOCKDEV_ID); - hang(); - } - - return device; -} - -#ifdef CONFIG_SPL_FAT_SUPPORT -static int block_load_image_fat(const char *filename) -{ - int err; - struct image_header *header; - - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); - - err = file_fat_read(filename, header, sizeof(struct image_header)); - if (err <= 0) - goto end; - - spl_parse_image_header(header); - - err = file_fat_read(filename, (u8 *)spl_image.load_addr, 0); - -end: - if (err <= 0) - printf("spl: error reading image %s, err - %d\n", - filename, err); - - return (err <= 0); -} - -#ifdef CONFIG_SPL_OS_BOOT -static int block_load_image_fat_os(void) -{ - int err; - - err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME, - (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); - if (err <= 0) { - return -1; - } - - return block_load_image_fat(CONFIG_SPL_FAT_LOAD_KERNEL_NAME); -} -#endif - -void spl_block_load_image(void) -{ - int err; - block_dev_desc_t * device; - - device = spl_get_block_device(); - err = fat_register_device(device, CONFIG_BLOCKDEV_FAT_BOOT_PARTITION); - if (err) { - printf("spl: fat register err - %d\n", err); - hang(); - } -#ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || block_load_image_fat_os()) -#endif - { - err = block_load_image_fat(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME); - if (err) - hang(); - } -} -#elif defined(CONFIG_SPL_EXT4_SUPPORT) /* end CONFIG_SPL_FAT_SUPPORT */ -static int block_load_image_ext4(const char *filename) -{ - int err; - struct image_header *header; - - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); - - err = ext4_read_file(filename, header, 0, sizeof(struct image_header)); - if (err <= 0) - goto end; - - spl_parse_image_header(header); - - err = ext4_read_file(filename, (u8 *)spl_image.load_addr, 0, 0); - -end: - return (err <= 0); -} - -#ifdef CONFIG_SPL_OS_BOOT -static int block_load_image_ext4_os(void) -{ - int err; - - err = ext4_read_file(CONFIG_SPL_EXT4_LOAD_ARGS_NAME, - (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, 0); - if (err <= 0) { - return -1; - } - - return block_load_image_ext4(CONFIG_SPL_EXT4_LOAD_KERNEL_NAME); -} -#endif - -void spl_block_load_image(void) -{ - int err; - block_dev_desc_t * device; - - device = spl_get_block_device(); - err = ext4_register_device(device, CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION); - if (err) { - hang(); - } -#ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || block_load_image_ext4_os()) -#endif - { - err = block_load_image_ext4(CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME); - if (err) - hang(); - } -} -#else /* end CONFIG_SPL_EXT4_SUPPORT */ -static int block_load_image_raw(block_dev_desc_t * device, lbaint_t sector) -{ - int n; - u32 image_size_sectors; - struct image_header *header; - - header = (struct image_header *)(CONFIG_SYS_TEXT_BASE - - sizeof(struct image_header)); - - /* read image header to find the image size & load address */ - n = device->block_read(device->dev, sector, 1, header); - - if (n != 1) { - printf("spl: blk read err\n"); - return 1; - } - - spl_parse_image_header(header); - - /* convert size to sectors - round up */ - image_size_sectors = (spl_image.size + 512 - 1) / 512; - n = device->block_read(device->dev, sector, image_size_sectors, - (void *)spl_image.load_addr); - - if (n != image_size_sectors) { - printf("spl: blk read err\n"); - return 1; - } - return 0; -} - -#ifdef CONFIG_SPL_OS_BOOT -static int block_load_image_raw_os(block_dev_desc_t * device) -{ - int n; - - n = device->block_read(device->dev, CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR, - CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS, - (u32 *)CONFIG_SYS_SPL_ARGS_ADDR); - /* flush cache after read */ - flush_cache(addr, CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS * 512); - - if (n != CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS) { - printf("args blk read error\n"); - return -1; - } - - return block_load_image_raw(device, CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR); -} -#endif - -void spl_block_load_image(void) -{ - int err; - block_dev_desc_t * device; - - device = spl_get_block_device(); -#ifdef CONFIG_SPL_OS_BOOT - if (spl_start_uboot() || block_load_image_raw_os(device)) -#endif - { - err = block_load_image_raw(device, - CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR); - if (err) - hang(); - } -} -#endif /* CONFIG_SPL_FAT_SUPPORT */ diff --git a/package/boot/uboot-oxnas/src/configs/ox820_defconfig b/package/boot/uboot-oxnas/src/configs/ox820_defconfig deleted file mode 100644 index 48a16d0c25..0000000000 --- a/package/boot/uboot-oxnas/src/configs/ox820_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_OX820=y -CONFIG_TARGET_OX820=y diff --git a/package/boot/uboot-oxnas/src/drivers/block/plxsata_ide.c b/package/boot/uboot-oxnas/src/drivers/block/plxsata_ide.c deleted file mode 100644 index 7e0e78f713..0000000000 --- a/package/boot/uboot-oxnas/src/drivers/block/plxsata_ide.c +++ /dev/null @@ -1,1170 +0,0 @@ -/* - * (C) Copyright 2005 - * Oxford Semiconductor Ltd - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston,` - * MA 02111-1307 USA - */ -#include -#include - -/** - * SATA related definitions - */ -#define ATA_PORT_CTL 0 -#define ATA_PORT_FEATURE 1 -#define ATA_PORT_NSECT 2 -#define ATA_PORT_LBAL 3 -#define ATA_PORT_LBAM 4 -#define ATA_PORT_LBAH 5 -#define ATA_PORT_DEVICE 6 -#define ATA_PORT_COMMAND 7 - -/* The offsets to the SATA registers */ -#define SATA_ORB1_OFF 0 -#define SATA_ORB2_OFF 1 -#define SATA_ORB3_OFF 2 -#define SATA_ORB4_OFF 3 -#define SATA_ORB5_OFF 4 - -#define SATA_FIS_ACCESS 11 -#define SATA_INT_STATUS_OFF 12 /* Read only */ -#define SATA_INT_CLR_OFF 12 /* Write only */ -#define SATA_INT_ENABLE_OFF 13 /* Read only */ -#define SATA_INT_ENABLE_SET_OFF 13 /* Write only */ -#define SATA_INT_ENABLE_CLR_OFF 14 /* Write only */ -#define SATA_VERSION_OFF 15 -#define SATA_CONTROL_OFF 23 -#define SATA_COMMAND_OFF 24 -#define SATA_PORT_CONTROL_OFF 25 -#define SATA_DRIVE_CONTROL_OFF 26 - -/* The offsets to the link registers that are access in an asynchronous manner */ -#define SATA_LINK_DATA 28 -#define SATA_LINK_RD_ADDR 29 -#define SATA_LINK_WR_ADDR 30 -#define SATA_LINK_CONTROL 31 - -/* SATA interrupt status register fields */ -#define SATA_INT_STATUS_EOC_RAW_BIT ( 0 + 16) -#define SATA_INT_STATUS_ERROR_BIT ( 2 + 16) -#define SATA_INT_STATUS_EOADT_RAW_BIT ( 1 + 16) - -/* SATA core command register commands */ -#define SATA_CMD_WRITE_TO_ORB_REGS 2 -#define SATA_CMD_WRITE_TO_ORB_REGS_NO_COMMAND 4 - -#define SATA_CMD_BUSY_BIT 7 - -#define SATA_SCTL_CLR_ERR 0x00000316UL - -#define SATA_LBAL_BIT 0 -#define SATA_LBAM_BIT 8 -#define SATA_LBAH_BIT 16 -#define SATA_HOB_LBAH_BIT 24 -#define SATA_DEVICE_BIT 24 -#define SATA_NSECT_BIT 0 -#define SATA_HOB_NSECT_BIT 8 -#define SATA_LBA32_BIT 0 -#define SATA_LBA40_BIT 8 -#define SATA_FEATURE_BIT 16 -#define SATA_COMMAND_BIT 24 -#define SATA_CTL_BIT 24 - -/* ATA status (7) register field definitions */ -#define ATA_STATUS_BSY_BIT 7 -#define ATA_STATUS_DRDY_BIT 6 -#define ATA_STATUS_DF_BIT 5 -#define ATA_STATUS_DRQ_BIT 3 -#define ATA_STATUS_ERR_BIT 0 - -/* ATA device (6) register field definitions */ -#define ATA_DEVICE_FIXED_MASK 0xA0 -#define ATA_DEVICE_DRV_BIT 4 -#define ATA_DEVICE_DRV_NUM_BITS 1 -#define ATA_DEVICE_LBA_BIT 6 - -/* ATA Command register initiated commands */ -#define ATA_CMD_INIT 0x91 -#define ATA_CMD_IDENT 0xEC - -#define SATA_STD_ASYNC_REGS_OFF 0x20 -#define SATA_SCR_STATUS 0 -#define SATA_SCR_ERROR 1 -#define SATA_SCR_CONTROL 2 -#define SATA_SCR_ACTIVE 3 -#define SATA_SCR_NOTIFICAION 4 - -#define SATA_BURST_BUF_FORCE_EOT_BIT 0 -#define SATA_BURST_BUF_DATA_INJ_ENABLE_BIT 1 -#define SATA_BURST_BUF_DIR_BIT 2 -#define SATA_BURST_BUF_DATA_INJ_END_BIT 3 -#define SATA_BURST_BUF_FIFO_DIS_BIT 4 -#define SATA_BURST_BUF_DIS_DREQ_BIT 5 -#define SATA_BURST_BUF_DREQ_BIT 6 - -#define SATA_OPCODE_MASK 0x3 - -#define SATA_DMA_CHANNEL 0 - -#define DMA_CTRL_STATUS (0x0) -#define DMA_BASE_SRC_ADR (0x4) -#define DMA_BASE_DST_ADR (0x8) -#define DMA_BYTE_CNT (0xC) -#define DMA_CURRENT_SRC_ADR (0x10) -#define DMA_CURRENT_DST_ADR (0x14) -#define DMA_CURRENT_BYTE_CNT (0x18) -#define DMA_INTR_ID (0x1C) -#define DMA_INTR_CLEAR_REG (DMA_CURRENT_SRC_ADR) - -#define DMA_CALC_REG_ADR(channel, register) ((volatile u32*)(DMA_BASE + ((channel) << 5) + (register))) - -#define DMA_CTRL_STATUS_FAIR_SHARE_ARB (1 << 0) -#define DMA_CTRL_STATUS_IN_PROGRESS (1 << 1) -#define DMA_CTRL_STATUS_SRC_DREQ_MASK (0x0000003C) -#define DMA_CTRL_STATUS_SRC_DREQ_SHIFT (2) -#define DMA_CTRL_STATUS_DEST_DREQ_MASK (0x000003C0) -#define DMA_CTRL_STATUS_DEST_DREQ_SHIFT (6) -#define DMA_CTRL_STATUS_INTR (1 << 10) -#define DMA_CTRL_STATUS_NXT_FREE (1 << 11) -#define DMA_CTRL_STATUS_RESET (1 << 12) -#define DMA_CTRL_STATUS_DIR_MASK (0x00006000) -#define DMA_CTRL_STATUS_DIR_SHIFT (13) -#define DMA_CTRL_STATUS_SRC_ADR_MODE (1 << 15) -#define DMA_CTRL_STATUS_DEST_ADR_MODE (1 << 16) -#define DMA_CTRL_STATUS_TRANSFER_MODE_A (1 << 17) -#define DMA_CTRL_STATUS_TRANSFER_MODE_B (1 << 18) -#define DMA_CTRL_STATUS_SRC_WIDTH_MASK (0x00380000) -#define DMA_CTRL_STATUS_SRC_WIDTH_SHIFT (19) -#define DMA_CTRL_STATUS_DEST_WIDTH_MASK (0x01C00000) -#define DMA_CTRL_STATUS_DEST_WIDTH_SHIFT (22) -#define DMA_CTRL_STATUS_PAUSE (1 << 25) -#define DMA_CTRL_STATUS_INTERRUPT_ENABLE (1 << 26) -#define DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED (1 << 27) -#define DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED (1 << 28) -#define DMA_CTRL_STATUS_STARVE_LOW_PRIORITY (1 << 29) -#define DMA_CTRL_STATUS_INTR_CLEAR_ENABLE (1 << 30) - -#define DMA_BYTE_CNT_MASK ((1 << 21) - 1) -#define DMA_BYTE_CNT_WR_EOT_MASK (1 << 30) -#define DMA_BYTE_CNT_RD_EOT_MASK (1 << 31) -#define DMA_BYTE_CNT_BURST_MASK (1 << 28) - -#define MAKE_FIELD(value, num_bits, bit_num) (((value) & ((1 << (num_bits)) - 1)) << (bit_num)) - -typedef enum oxnas_dma_mode { - OXNAS_DMA_MODE_FIXED, OXNAS_DMA_MODE_INC -} oxnas_dma_mode_t; - -typedef enum oxnas_dma_direction { - OXNAS_DMA_TO_DEVICE, OXNAS_DMA_FROM_DEVICE -} oxnas_dma_direction_t; - -/* The available buses to which the DMA controller is attached */ -typedef enum oxnas_dma_transfer_bus { - OXNAS_DMA_SIDE_A, OXNAS_DMA_SIDE_B -} oxnas_dma_transfer_bus_t; - -/* Direction of data flow between the DMA controller's pair of interfaces */ -typedef enum oxnas_dma_transfer_direction { - OXNAS_DMA_A_TO_A, OXNAS_DMA_B_TO_A, OXNAS_DMA_A_TO_B, OXNAS_DMA_B_TO_B -} oxnas_dma_transfer_direction_t; - -/* The available data widths */ -typedef enum oxnas_dma_transfer_width { - OXNAS_DMA_TRANSFER_WIDTH_8BITS, - OXNAS_DMA_TRANSFER_WIDTH_16BITS, - OXNAS_DMA_TRANSFER_WIDTH_32BITS -} oxnas_dma_transfer_width_t; - -/* The mode of the DMA transfer */ -typedef enum oxnas_dma_transfer_mode { - OXNAS_DMA_TRANSFER_MODE_SINGLE, OXNAS_DMA_TRANSFER_MODE_BURST -} oxnas_dma_transfer_mode_t; - -/* The available transfer targets */ -typedef enum oxnas_dma_dreq { - OXNAS_DMA_DREQ_SATA = 0, OXNAS_DMA_DREQ_MEMORY = 15 -} oxnas_dma_dreq_t; - -typedef struct oxnas_dma_device_settings { - unsigned long address_; - unsigned fifo_size_; // Chained transfers must take account of FIFO offset at end of previous transfer - unsigned char dreq_; - unsigned read_eot_ :1; - unsigned read_final_eot_ :1; - unsigned write_eot_ :1; - unsigned write_final_eot_ :1; - unsigned bus_ :1; - unsigned width_ :2; - unsigned transfer_mode_ :1; - unsigned address_mode_ :1; - unsigned address_really_fixed_ :1; -} oxnas_dma_device_settings_t; - -static const int MAX_NO_ERROR_LOOPS = 100000; /* 1 second in units of 10uS */ -static const int MAX_DMA_XFER_LOOPS = 300000; /* 30 seconds in units of 100uS */ -static const int MAX_DMA_ABORT_LOOPS = 10000; /* 0.1 second in units of 10uS */ -static const int MAX_SRC_READ_LOOPS = 10000; /* 0.1 second in units of 10uS */ -static const int MAX_SRC_WRITE_LOOPS = 10000; /* 0.1 second in units of 10uS */ -static const int MAX_NOT_BUSY_LOOPS = 10000; /* 1 second in units of 100uS */ - -/* The internal SATA drive on which we should attempt to find partitions */ -static volatile u32* sata_regs_base[2] = { (volatile u32*) SATA_0_REGS_BASE, - (volatile u32*) SATA_1_REGS_BASE, - -}; -static u32 wr_sata_orb1[2] = { 0, 0 }; -static u32 wr_sata_orb2[2] = { 0, 0 }; -static u32 wr_sata_orb3[2] = { 0, 0 }; -static u32 wr_sata_orb4[2] = { 0, 0 }; - -#ifdef CONFIG_LBA48 -/* need keeping a record of NSECT LBAL LBAM LBAH ide_outb values for lba48 support */ -#define OUT_HISTORY_BASE ATA_PORT_NSECT -#define OUT_HISTORY_MAX ATA_PORT_LBAH -static unsigned char out_history[2][OUT_HISTORY_MAX - OUT_HISTORY_BASE + 1] = {}; -#endif - -static oxnas_dma_device_settings_t oxnas_sata_dma_settings = { .address_ = - SATA_DATA_BASE, .fifo_size_ = 16, .dreq_ = OXNAS_DMA_DREQ_SATA, - .read_eot_ = 0, .read_final_eot_ = 1, .write_eot_ = 0, - .write_final_eot_ = 1, .bus_ = OXNAS_DMA_SIDE_B, .width_ = - OXNAS_DMA_TRANSFER_WIDTH_32BITS, .transfer_mode_ = - OXNAS_DMA_TRANSFER_MODE_BURST, .address_mode_ = - OXNAS_DMA_MODE_FIXED, .address_really_fixed_ = 0 }; - -oxnas_dma_device_settings_t oxnas_ram_dma_settings = { .address_ = 0, - .fifo_size_ = 0, .dreq_ = OXNAS_DMA_DREQ_MEMORY, .read_eot_ = 1, - .read_final_eot_ = 1, .write_eot_ = 1, .write_final_eot_ = 1, - .bus_ = OXNAS_DMA_SIDE_A, .width_ = - OXNAS_DMA_TRANSFER_WIDTH_32BITS, .transfer_mode_ = - OXNAS_DMA_TRANSFER_MODE_BURST, .address_mode_ = - OXNAS_DMA_MODE_FIXED, .address_really_fixed_ = 1 }; - -static void xfer_wr_shadow_to_orbs(int device) -{ - *(sata_regs_base[device] + SATA_ORB1_OFF) = wr_sata_orb1[device]; - *(sata_regs_base[device] + SATA_ORB2_OFF) = wr_sata_orb2[device]; - *(sata_regs_base[device] + SATA_ORB3_OFF) = wr_sata_orb3[device]; - *(sata_regs_base[device] + SATA_ORB4_OFF) = wr_sata_orb4[device]; -} - -static inline void device_select(int device) -{ - /* master/slave has no meaning to SATA core */ -} - -static int disk_present[CONFIG_SYS_IDE_MAXDEVICE]; - -#include - -unsigned char ide_inb(int device, int port) -{ - unsigned char val = 0; - - /* Only permit accesses to disks found to be present during ide_preinit() */ - if (!disk_present[device]) { - return ATA_STAT_FAULT; - } - - device_select(device); - - switch (port) { - case ATA_PORT_CTL: - val = (*(sata_regs_base[device] + SATA_ORB4_OFF) - & (0xFFUL << SATA_CTL_BIT)) >> SATA_CTL_BIT; - break; - case ATA_PORT_FEATURE: - val = (*(sata_regs_base[device] + SATA_ORB2_OFF) - & (0xFFUL << SATA_FEATURE_BIT)) >> SATA_FEATURE_BIT; - break; - case ATA_PORT_NSECT: - val = (*(sata_regs_base[device] + SATA_ORB2_OFF) - & (0xFFUL << SATA_NSECT_BIT)) >> SATA_NSECT_BIT; - break; - case ATA_PORT_LBAL: - val = (*(sata_regs_base[device] + SATA_ORB3_OFF) - & (0xFFUL << SATA_LBAL_BIT)) >> SATA_LBAL_BIT; - break; - case ATA_PORT_LBAM: - val = (*(sata_regs_base[device] + SATA_ORB3_OFF) - & (0xFFUL << SATA_LBAM_BIT)) >> SATA_LBAM_BIT; - break; - case ATA_PORT_LBAH: - val = (*(sata_regs_base[device] + SATA_ORB3_OFF) - & (0xFFUL << SATA_LBAH_BIT)) >> SATA_LBAH_BIT; - break; - case ATA_PORT_DEVICE: - val = (*(sata_regs_base[device] + SATA_ORB3_OFF) - & (0xFFUL << SATA_HOB_LBAH_BIT)) >> SATA_HOB_LBAH_BIT; - val |= (*(sata_regs_base[device] + SATA_ORB1_OFF) - & (0xFFUL << SATA_DEVICE_BIT)) >> SATA_DEVICE_BIT; - break; - case ATA_PORT_COMMAND: - val = (*(sata_regs_base[device] + SATA_ORB2_OFF) - & (0xFFUL << SATA_COMMAND_BIT)) >> SATA_COMMAND_BIT; - val |= ATA_STAT_DRQ; - break; - default: - printf("ide_inb() Unknown port = %d\n", port); - break; - } - - // printf("inb: %d:%01x => %02x\n", device, port, val); - - return val; -} - -/** - * Possible that ATA status will not become no-error, so must have timeout - * @returns An int which is zero on error - */ -static inline int wait_no_error(int device) -{ - int status = 0; - - /* Check for ATA core error */ - if (*(sata_regs_base[device] + SATA_INT_STATUS_OFF) - & (1 << SATA_INT_STATUS_ERROR_BIT)) { - printf("wait_no_error() SATA core flagged error\n"); - } else { - int loops = MAX_NO_ERROR_LOOPS; - do { - /* Check for ATA device error */ - if (!(ide_inb(device, ATA_PORT_COMMAND) - & (1 << ATA_STATUS_ERR_BIT))) { - status = 1; - break; - } - udelay(10); - } while (--loops); - - if (!loops) { - printf("wait_no_error() Timed out of wait for SATA no-error condition\n"); - } - } - - return status; -} - -/** - * Expect SATA command to always finish, perhaps with error - * @returns An int which is zero on error - */ -static inline int wait_sata_command_not_busy(int device) -{ - /* Wait for data to be available */ - int status = 0; - int loops = MAX_NOT_BUSY_LOOPS; - do { - if (!(*(sata_regs_base[device] + SATA_COMMAND_OFF) - & (1 << SATA_CMD_BUSY_BIT))) { - status = 1; - break; - } - udelay(100); - } while (--loops); - - if (!loops) { - printf("wait_sata_command_not_busy() Timed out of wait for SATA command to finish\n"); - } - - return status; -} - -void ide_outb(int device, int port, unsigned char val) -{ - typedef enum send_method { - SEND_NONE, SEND_SIMPLE, SEND_CMD, SEND_CTL, - } send_method_t; - - /* Only permit accesses to disks found to be present during ide_preinit() */ - if (!disk_present[device]) { - return; - } - - // printf("outb: %d:%01x <= %02x\n", device, port, val); - - device_select(device); - -#ifdef CONFIG_LBA48 - if (port >= OUT_HISTORY_BASE && port <= OUT_HISTORY_MAX) { - out_history[0][port - OUT_HISTORY_BASE] = - out_history[1][port - OUT_HISTORY_BASE]; - out_history[1][port - OUT_HISTORY_BASE] = val; - } -#endif - send_method_t send_regs = SEND_NONE; - switch (port) { - case ATA_PORT_CTL: - wr_sata_orb4[device] &= ~(0xFFUL << SATA_CTL_BIT); - wr_sata_orb4[device] |= (val << SATA_CTL_BIT); - send_regs = SEND_CTL; - break; - case ATA_PORT_FEATURE: - wr_sata_orb2[device] &= ~(0xFFUL << SATA_FEATURE_BIT); - wr_sata_orb2[device] |= (val << SATA_FEATURE_BIT); - send_regs = SEND_SIMPLE; - break; - case ATA_PORT_NSECT: - wr_sata_orb2[device] &= ~(0xFFUL << SATA_NSECT_BIT); - wr_sata_orb2[device] |= (val << SATA_NSECT_BIT); - send_regs = SEND_SIMPLE; - break; - case ATA_PORT_LBAL: - wr_sata_orb3[device] &= ~(0xFFUL << SATA_LBAL_BIT); - wr_sata_orb3[device] |= (val << SATA_LBAL_BIT); - send_regs = SEND_SIMPLE; - break; - case ATA_PORT_LBAM: - wr_sata_orb3[device] &= ~(0xFFUL << SATA_LBAM_BIT); - wr_sata_orb3[device] |= (val << SATA_LBAM_BIT); - send_regs = SEND_SIMPLE; - break; - case ATA_PORT_LBAH: - wr_sata_orb3[device] &= ~(0xFFUL << SATA_LBAH_BIT); - wr_sata_orb3[device] |= (val << SATA_LBAH_BIT); - send_regs = SEND_SIMPLE; - break; - case ATA_PORT_DEVICE: - wr_sata_orb1[device] &= ~(0xFFUL << SATA_DEVICE_BIT); - wr_sata_orb1[device] |= (val << SATA_DEVICE_BIT); - send_regs = SEND_SIMPLE; - break; - case ATA_PORT_COMMAND: - wr_sata_orb2[device] &= ~(0xFFUL << SATA_COMMAND_BIT); - wr_sata_orb2[device] |= (val << SATA_COMMAND_BIT); - send_regs = SEND_CMD; -#ifdef CONFIG_LBA48 - if (val == ATA_CMD_READ_EXT || val == ATA_CMD_WRITE_EXT) - { - /* fill high bytes of LBA48 && NSECT */ - wr_sata_orb2[device] &= ~(0xFFUL << SATA_HOB_NSECT_BIT); - wr_sata_orb2[device] |= - (out_history[0][ATA_PORT_NSECT - OUT_HISTORY_BASE] << SATA_HOB_NSECT_BIT); - - wr_sata_orb3[device] &= ~(0xFFUL << SATA_HOB_LBAH_BIT); - wr_sata_orb3[device] |= - (out_history[0][ATA_PORT_LBAL - OUT_HISTORY_BASE] << SATA_HOB_LBAH_BIT); - - wr_sata_orb4[device] &= ~(0xFFUL << SATA_LBA32_BIT); - wr_sata_orb4[device] |= - (out_history[0][ATA_PORT_LBAM - OUT_HISTORY_BASE] << SATA_LBA32_BIT); - - wr_sata_orb4[device] &= ~(0xFFUL << SATA_LBA40_BIT); - wr_sata_orb4[device] |= - (out_history[0][ATA_PORT_LBAH - OUT_HISTORY_BASE] << SATA_LBA40_BIT); - } -#endif - break; - default: - printf("ide_outb() Unknown port = %d\n", port); - } - - u32 command; - switch (send_regs) { - case SEND_CMD: - wait_sata_command_not_busy(device); - command = *(sata_regs_base[device] + SATA_COMMAND_OFF); - command &= ~SATA_OPCODE_MASK; - command |= SATA_CMD_WRITE_TO_ORB_REGS; - xfer_wr_shadow_to_orbs(device); - wait_sata_command_not_busy(device); - *(sata_regs_base[device] + SATA_COMMAND_OFF) = command; - if (!wait_no_error(device)) { - printf("ide_outb() Wait for ATA no-error timed-out\n"); - } - break; - case SEND_CTL: - wait_sata_command_not_busy(device); - command = *(sata_regs_base[device] + SATA_COMMAND_OFF); - command &= ~SATA_OPCODE_MASK; - command |= SATA_CMD_WRITE_TO_ORB_REGS_NO_COMMAND; - xfer_wr_shadow_to_orbs(device); - wait_sata_command_not_busy(device); - *(sata_regs_base[device] + SATA_COMMAND_OFF) = command; - if (!wait_no_error(device)) { - printf("ide_outb() Wait for ATA no-error timed-out\n"); - } - break; - default: - break; - } -} - -static u32 encode_start(u32 ctrl_status) -{ - return ctrl_status & ~DMA_CTRL_STATUS_PAUSE; -} - -/* start a paused DMA transfer in channel 0 of the SATA DMA core */ -static void dma_start(void) -{ - unsigned int reg; - reg = readl(SATA_DMA_REGS_BASE + DMA_CTRL_STATUS); - reg = encode_start(reg); - writel(reg, SATA_DMA_REGS_BASE + DMA_CTRL_STATUS); -} - -static unsigned long encode_control_status( - oxnas_dma_device_settings_t* src_settings, - oxnas_dma_device_settings_t* dst_settings) -{ - unsigned long ctrl_status; - oxnas_dma_transfer_direction_t direction; - - ctrl_status = DMA_CTRL_STATUS_PAUSE; // Paused - ctrl_status |= DMA_CTRL_STATUS_FAIR_SHARE_ARB; // High priority - ctrl_status |= (src_settings->dreq_ << DMA_CTRL_STATUS_SRC_DREQ_SHIFT); // Dreq - ctrl_status |= (dst_settings->dreq_ << DMA_CTRL_STATUS_DEST_DREQ_SHIFT); // Dreq - ctrl_status &= ~DMA_CTRL_STATUS_RESET; // !RESET - - // Use new interrupt clearing register - ctrl_status |= DMA_CTRL_STATUS_INTR_CLEAR_ENABLE; - - // Setup the transfer direction and burst/single mode for the two DMA busses - if (src_settings->bus_ == OXNAS_DMA_SIDE_A) { - // Set the burst/single mode for bus A based on src device's settings - if (src_settings->transfer_mode_ - == OXNAS_DMA_TRANSFER_MODE_BURST) { - ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_A; - } else { - ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_A; - } - - if (dst_settings->bus_ == OXNAS_DMA_SIDE_A) { - direction = OXNAS_DMA_A_TO_A; - } else { - direction = OXNAS_DMA_A_TO_B; - - // Set the burst/single mode for bus B based on dst device's settings - if (dst_settings->transfer_mode_ - == OXNAS_DMA_TRANSFER_MODE_BURST) { - ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_B; - } else { - ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_B; - } - } - } else { - // Set the burst/single mode for bus B based on src device's settings - if (src_settings->transfer_mode_ - == OXNAS_DMA_TRANSFER_MODE_BURST) { - ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_B; - } else { - ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_B; - } - - if (dst_settings->bus_ == OXNAS_DMA_SIDE_A) { - direction = OXNAS_DMA_B_TO_A; - - // Set the burst/single mode for bus A based on dst device's settings - if (dst_settings->transfer_mode_ - == OXNAS_DMA_TRANSFER_MODE_BURST) { - ctrl_status |= DMA_CTRL_STATUS_TRANSFER_MODE_A; - } else { - ctrl_status &= ~DMA_CTRL_STATUS_TRANSFER_MODE_A; - } - } else { - direction = OXNAS_DMA_B_TO_B; - } - } - ctrl_status |= (direction << DMA_CTRL_STATUS_DIR_SHIFT); - - // Setup source address mode fixed or increment - if (src_settings->address_mode_ == OXNAS_DMA_MODE_FIXED) { - // Fixed address - ctrl_status &= ~(DMA_CTRL_STATUS_SRC_ADR_MODE); - - // Set up whether fixed address is _really_ fixed - if (src_settings->address_really_fixed_) { - ctrl_status |= DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED; - } else { - ctrl_status &= ~DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED; - } - } else { - // Incrementing address - ctrl_status |= DMA_CTRL_STATUS_SRC_ADR_MODE; - ctrl_status &= ~DMA_CTRL_STATUS_SOURCE_ADDRESS_FIXED; - } - - // Setup destination address mode fixed or increment - if (dst_settings->address_mode_ == OXNAS_DMA_MODE_FIXED) { - // Fixed address - ctrl_status &= ~(DMA_CTRL_STATUS_DEST_ADR_MODE); - - // Set up whether fixed address is _really_ fixed - if (dst_settings->address_really_fixed_) { - ctrl_status |= - DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED; - } else { - ctrl_status &= - ~DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED; - } - } else { - // Incrementing address - ctrl_status |= DMA_CTRL_STATUS_DEST_ADR_MODE; - ctrl_status &= ~DMA_CTRL_STATUS_DESTINATION_ADDRESS_FIXED; - } - - // Set up the width of the transfers on the DMA buses - ctrl_status |= - (src_settings->width_ << DMA_CTRL_STATUS_SRC_WIDTH_SHIFT); - ctrl_status |= - (dst_settings->width_ << DMA_CTRL_STATUS_DEST_WIDTH_SHIFT); - - // Setup the priority arbitration scheme - ctrl_status &= ~DMA_CTRL_STATUS_STARVE_LOW_PRIORITY; // !Starve low priority - - return ctrl_status; -} - -static u32 encode_final_eot(oxnas_dma_device_settings_t* src_settings, - oxnas_dma_device_settings_t* dst_settings, - unsigned long length) -{ - // Write the length, with EOT configuration for a final transfer - unsigned long encoded = length; - if (dst_settings->write_final_eot_) { - encoded |= DMA_BYTE_CNT_WR_EOT_MASK; - } else { - encoded &= ~DMA_BYTE_CNT_WR_EOT_MASK; - } - if (src_settings->read_final_eot_) { - encoded |= DMA_BYTE_CNT_RD_EOT_MASK; - } else { - encoded &= ~DMA_BYTE_CNT_RD_EOT_MASK; - } - /* if((src_settings->transfer_mode_) || - (src_settings->transfer_mode_)) { - encoded |= DMA_BYTE_CNT_BURST_MASK; - } else { - encoded &= ~DMA_BYTE_CNT_BURST_MASK; - }*/ - return encoded; -} - -static void dma_start_write(const ulong* buffer, int num_bytes) -{ - // Assemble complete memory settings - oxnas_dma_device_settings_t mem_settings = oxnas_ram_dma_settings; - mem_settings.address_ = (unsigned long) buffer; - mem_settings.address_mode_ = OXNAS_DMA_MODE_INC; - - writel(encode_control_status(&mem_settings, &oxnas_sata_dma_settings), - SATA_DMA_REGS_BASE + DMA_CTRL_STATUS); - writel(mem_settings.address_, SATA_DMA_REGS_BASE + DMA_BASE_SRC_ADR); - writel(oxnas_sata_dma_settings.address_, - SATA_DMA_REGS_BASE + DMA_BASE_DST_ADR); - writel(encode_final_eot(&mem_settings, &oxnas_sata_dma_settings, - num_bytes), - SATA_DMA_REGS_BASE + DMA_BYTE_CNT); - - dma_start(); -} - -static void dma_start_read(ulong* buffer, int num_bytes) -{ - // Assemble complete memory settings - oxnas_dma_device_settings_t mem_settings = oxnas_ram_dma_settings; - mem_settings.address_ = (unsigned long) buffer; - mem_settings.address_mode_ = OXNAS_DMA_MODE_INC; - - writel(encode_control_status(&oxnas_sata_dma_settings, &mem_settings), - SATA_DMA_REGS_BASE + DMA_CTRL_STATUS); - writel(oxnas_sata_dma_settings.address_, - SATA_DMA_REGS_BASE + DMA_BASE_SRC_ADR); - writel(mem_settings.address_, SATA_DMA_REGS_BASE + DMA_BASE_DST_ADR); - writel(encode_final_eot(&oxnas_sata_dma_settings, &mem_settings, - num_bytes), - SATA_DMA_REGS_BASE + DMA_BYTE_CNT); - - dma_start(); -} - -static inline int dma_busy(void) -{ - return readl(SATA_DMA_REGS_BASE + DMA_CTRL_STATUS) - & DMA_CTRL_STATUS_IN_PROGRESS; -} - -static int wait_dma_not_busy(int device) -{ - unsigned int cleanup_required = 0; - - /* Poll for DMA completion */ - int loops = MAX_DMA_XFER_LOOPS; - do { - if (!dma_busy()) { - break; - } - udelay(100); - } while (--loops); - - if (!loops) { - printf("wait_dma_not_busy() Timed out of wait for DMA not busy\n"); - cleanup_required = 1; - } - - if (cleanup_required) { - /* Abort DMA to make sure it has finished. */ - unsigned int ctrl_status = readl( - SATA_DMA_CHANNEL + DMA_CTRL_STATUS); - ctrl_status |= DMA_CTRL_STATUS_RESET; - writel(ctrl_status, SATA_DMA_CHANNEL + DMA_CTRL_STATUS); - - // Wait for the channel to become idle - should be quick as should - // finish after the next AHB single or burst transfer - loops = MAX_DMA_ABORT_LOOPS; - do { - if (!dma_busy()) { - break; - } - udelay(10); - } while (--loops); - - if (!loops) { - printf("wait_dma_not_busy() Timed out of wait for DMA channel abort\n"); - } else { - /* Successfully cleanup the DMA channel */ - cleanup_required = 0; - } - - // Deassert reset for the channel - ctrl_status = readl(SATA_DMA_CHANNEL + DMA_CTRL_STATUS); - ctrl_status &= ~DMA_CTRL_STATUS_RESET; - writel(ctrl_status, SATA_DMA_CHANNEL + DMA_CTRL_STATUS); - } - - return !cleanup_required; -} - -/** - * Possible that ATA status will not become not-busy, so must have timeout - */ -static unsigned int wait_not_busy(int device, unsigned long timeout_secs) -{ - int busy = 1; - unsigned long loops = (timeout_secs * 1000) / 50; - do { - // Test the ATA status register BUSY flag - if (!((*(sata_regs_base[device] + SATA_ORB2_OFF) - >> SATA_COMMAND_BIT) & (1UL << ATA_STATUS_BSY_BIT))) { - /* Not busy, so stop polling */ - busy = 0; - break; - } - - // Wait for 50mS before sampling ATA status register again - udelay(50000); - } while (--loops); - - return busy; -} - -void ide_output_data(int device, const ulong *sect_buf, int words) -{ - /* Only permit accesses to disks found to be present during ide_preinit() */ - if (!disk_present[device]) { - return; - } - - /* Select the required internal SATA drive */ - device_select(device); - - /* Start the DMA channel sending data from the passed buffer to the SATA core */ - dma_start_write(sect_buf, words << 2); - - /* Don't know why we need this delay, but without it the wait for DMA not - busy times soemtimes out, e.g. when saving environment to second disk */ - udelay(1000); - - /* Wait for DMA to finish */ - if (!wait_dma_not_busy(device)) { - printf("Timed out of wait for DMA channel for SATA device %d to have in-progress clear\n", - device); - } - - /* Sata core should finish after DMA */ - if (wait_not_busy(device, 30)) { - printf("Timed out of wait for SATA device %d to have BUSY clear\n", - device); - } - if (!wait_no_error(device)) { - printf("oxnas_sata_output_data() Wait for ATA no-error timed-out\n"); - } -} - - -#define SATA_DM_DBG1 (SATA_HOST_REGS_BASE + 0) -#define SATA_DATACOUNT_PORT0 (SATA_HOST_REGS_BASE + 0x10) -#define SATA_DATACOUNT_PORT1 (SATA_HOST_REGS_BASE + 0x14) -#define SATA_DATA_MUX_RAM0 (SATA_HOST_REGS_BASE + 0x8000) -#define SATA_DATA_MUX_RAM1 (SATA_HOST_REGS_BASE + 0xA000) -/* Sata core debug1 register bits */ -#define SATA_CORE_PORT0_DATA_DIR_BIT 20 -#define SATA_CORE_PORT1_DATA_DIR_BIT 21 -#define SATA_CORE_PORT0_DATA_DIR (1 << SATA_CORE_PORT0_DATA_DIR_BIT) -#define SATA_CORE_PORT1_DATA_DIR (1 << SATA_CORE_PORT1_DATA_DIR_BIT) - -/** - * Ref bug-6320 - * - * This code is a work around for a DMA hardware bug that will repeat the - * penultimate 8-bytes on some reads. This code will check that the amount - * of data transferred is a multiple of 512 bytes, if not the in it will - * fetch the correct data from a buffer in the SATA core and copy it into - * memory. - * - */ -static void sata_bug_6320_workaround(int port, ulong *candidate) -{ - int is_read; - int quads_transferred; - int remainder; - int sector_quads_remaining; - - /* Only want to apply fix to reads */ - is_read = !(*((unsigned long*) SATA_DM_DBG1) - & (port ? SATA_CORE_PORT1_DATA_DIR : SATA_CORE_PORT0_DATA_DIR)); - - /* Check for an incomplete transfer, i.e. not a multiple of 512 bytes - transferred (datacount_port register counts quads transferred) */ - quads_transferred = *((unsigned long*) ( - port ? SATA_DATACOUNT_PORT1 : SATA_DATACOUNT_PORT0)); - - remainder = quads_transferred & 0x7f; - sector_quads_remaining = remainder ? (0x80 - remainder) : 0; - - if (is_read && (sector_quads_remaining == 2)) { - debug("SATA read fixup, only transfered %d quads, " - "sector_quads_remaining %d, port %d\n", - quads_transferred, sector_quads_remaining, port); - - int total_len = ATA_SECT_SIZE; - ulong *sata_data_ptr = (void*) ( - port ? SATA_DATA_MUX_RAM1 : SATA_DATA_MUX_RAM0) - + ((total_len - 8) % 2048); - - *candidate = *sata_data_ptr; - *(candidate + 1) = *(sata_data_ptr + 1); - } -} - - -void ide_input_data(int device, ulong *sect_buf, int words) -{ - /* Only permit accesses to disks found to be present during ide_preinit() */ - if (!disk_present[device]) { - return; - } - - /* Select the required internal SATA drive */ - device_select(device); - - /* Start the DMA channel receiving data from the SATA core into the passed buffer */ - dma_start_read(sect_buf, words << 2); - - /* Sata core should finish before DMA */ - if (wait_not_busy(device, 30)) { - printf("Timed out of wait for SATA device %d to have BUSY clear\n", - device); - } - if (!wait_no_error(device)) { - printf("oxnas_sata_output_data() Wait for ATA no-error timed-out\n"); - } - - /* Wait for DMA to finish */ - if (!wait_dma_not_busy(device)) { - printf("Timed out of wait for DMA channel for SATA device %d to have in-progress clear\n", - device); - } - - if (words == ATA_SECTORWORDS) - sata_bug_6320_workaround(device, sect_buf + words - 2); -} - -static u32 scr_read(int device, unsigned int sc_reg) -{ - /* Setup adr of required register. std regs start eight into async region */ - *(sata_regs_base[device] + SATA_LINK_RD_ADDR) = sc_reg - * 4+ SATA_STD_ASYNC_REGS_OFF; - - /* Wait for data to be available */ - int loops = MAX_SRC_READ_LOOPS; - do { - if (*(sata_regs_base[device] + SATA_LINK_CONTROL) & 1UL) { - break; - } - udelay(10); - } while (--loops); - - if (!loops) { - printf("scr_read() Timed out of wait for read completion\n"); - } - - /* Read the data from the async register */ - return *(sata_regs_base[device] + SATA_LINK_DATA); -} - -static void scr_write(int device, unsigned int sc_reg, u32 val) -{ - /* Setup the data for the write */ - *(sata_regs_base[device] + SATA_LINK_DATA) = val; - - /* Setup adr of required register. std regs start eight into async region */ - *(sata_regs_base[device] + SATA_LINK_WR_ADDR) = sc_reg - * 4+ SATA_STD_ASYNC_REGS_OFF; - - /* Wait for data to be written */ - int loops = MAX_SRC_WRITE_LOOPS; - do { - if (*(sata_regs_base[device] + SATA_LINK_CONTROL) & 1UL) { - break; - } - udelay(10); - } while (--loops); - - if (!loops) { - printf("scr_write() Timed out of wait for write completion\n"); - } -} -extern void workaround5458(void); - -#define PHY_LOOP_COUNT 25 /* Wait for upto 5 seconds for PHY to be found */ -#define LOS_AND_TX_LVL 0x2988 -#define TX_ATTEN 0x55629 - -static int phy_reset(int device) -{ - int phy_status = 0; - int loops = 0; - - scr_write(device, (0x60 - SATA_STD_ASYNC_REGS_OFF) / 4, LOS_AND_TX_LVL); - scr_write(device, (0x70 - SATA_STD_ASYNC_REGS_OFF) / 4, TX_ATTEN); - - /* limit it to Gen-1 SATA (1.5G) */ - scr_write(device, SATA_SCR_CONTROL, 0x311); /* Issue phy wake & core reset */ - scr_read(device, SATA_SCR_STATUS); /* Dummy read; flush */ - udelay(1000); - scr_write(device, SATA_SCR_CONTROL, 0x310); /* Issue phy wake & clear core reset */ - - /* Wait for upto 5 seconds for PHY to become ready */ - do { - udelay(200000); - if ((scr_read(device, SATA_SCR_STATUS) & 0xf) == 3) { - scr_write(device, SATA_SCR_ERROR, ~0); - phy_status = 1; - break; - } - //printf("No SATA PHY found status:0x%x\n", scr_read(device, SATA_SCR_STATUS)); - } while (++loops < PHY_LOOP_COUNT); - - if (phy_status) { - udelay(500000); /* wait half a second */ - } - - return phy_status; -} - -#define FIS_LOOP_COUNT 25 /* Wait for upto 5 seconds for FIS to be received */ -static int wait_FIS(int device) -{ - int status = 0; - int loops = 0; - - do { - udelay(200000); - if (ide_inb(device, ATA_PORT_NSECT) > 0) { - status = 1; - break; - } - } while (++loops < FIS_LOOP_COUNT); - - return status; -} - - -#define SATA_PHY_ASIC_STAT (0x44900000) -#define SATA_PHY_ASIC_DATA (0x44900004) - -/** - * initialise functions and macros for ASIC implementation - */ -#define PH_GAIN 2 -#define FR_GAIN 3 -#define PH_GAIN_OFFSET 6 -#define FR_GAIN_OFFSET 8 -#define PH_GAIN_MASK (0x3 << PH_GAIN_OFFSET) -#define FR_GAIN_MASK (0x3 << FR_GAIN_OFFSET) -#define USE_INT_SETTING (1<<5) - -#define CR_READ_ENABLE (1<<16) -#define CR_WRITE_ENABLE (1<<17) -#define CR_CAP_DATA (1<<18) - -static void wait_cr_ack(void) -{ - while ((readl(SATA_PHY_ASIC_STAT) >> 16) & 0x1f) - /* wait for an ack bit to be set */; -} - -static unsigned short read_cr(unsigned short address) -{ - writel(address, SATA_PHY_ASIC_STAT); - wait_cr_ack(); - writel(CR_READ_ENABLE, SATA_PHY_ASIC_DATA); - wait_cr_ack(); - return readl(SATA_PHY_ASIC_STAT); -} - -static void write_cr(unsigned short data, unsigned short address) -{ - writel(address, SATA_PHY_ASIC_STAT); - wait_cr_ack(); - writel((data | CR_CAP_DATA), SATA_PHY_ASIC_DATA); - wait_cr_ack(); - writel(CR_WRITE_ENABLE, SATA_PHY_ASIC_DATA); - wait_cr_ack(); - return; -} - -void workaround5458(void) -{ - unsigned i; - - for (i = 0; i < 2; i++) { - unsigned short rx_control = read_cr(0x201d + (i << 8)); - rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK); - rx_control |= PH_GAIN << PH_GAIN_OFFSET; - rx_control |= FR_GAIN << FR_GAIN_OFFSET; - rx_control |= USE_INT_SETTING; - write_cr(rx_control, 0x201d + (i << 8)); - } -} - -int ide_preinit(void) -{ - int num_disks_found = 0; - - /* Initialise records of which disks are present to all present */ - int i; - for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) { - disk_present[i] = 1; - } - - /* Block reset SATA and DMA cores */ - reset_block(SYS_CTRL_RST_SATA, 1); - reset_block(SYS_CTRL_RST_SATA_LINK, 1); - reset_block(SYS_CTRL_RST_SATA_PHY, 1); - reset_block(SYS_CTRL_RST_SGDMA, 1); - - /* Enable clocks to SATA and DMA cores */ - enable_clock(SYS_CTRL_CLK_SATA); - enable_clock(SYS_CTRL_CLK_DMA); - - udelay(5000); - reset_block(SYS_CTRL_RST_SATA_PHY, 0); - udelay(50); - reset_block(SYS_CTRL_RST_SATA, 0); - reset_block(SYS_CTRL_RST_SATA_LINK, 0); - udelay(50); - reset_block(SYS_CTRL_RST_SGDMA, 0); - udelay(100); - /* Apply the Synopsis SATA PHY workarounds */ - workaround5458(); - udelay(10000); - - /* disable and clear core interrupts */ - *((unsigned long*) SATA_HOST_REGS_BASE + SATA_INT_ENABLE_CLR_OFF) = - ~0UL; - *((unsigned long*) SATA_HOST_REGS_BASE + SATA_INT_CLR_OFF) = ~0UL; - - int device; - for (device = 0; device < CONFIG_SYS_IDE_MAXDEVICE; device++) { - int found = 0; - int retries = 1; - - /* Disable SATA interrupts */ - *(sata_regs_base[device] + SATA_INT_ENABLE_CLR_OFF) = ~0UL; - - /* Clear any pending SATA interrupts */ - *(sata_regs_base[device] + SATA_INT_CLR_OFF) = ~0UL; - - do { - /* clear sector count register for FIS detection */ - ide_outb(device, ATA_PORT_NSECT, 0); - - /* Get the PHY working */ - if (!phy_reset(device)) { - printf("SATA PHY not ready for device %d\n", - device); - break; - } - - if (!wait_FIS(device)) { - printf("No FIS received from device %d\n", - device); - } else { - if ((scr_read(device, SATA_SCR_STATUS) & 0xf) - == 0x3) { - if (wait_not_busy(device, 30)) { - printf("Timed out of wait for SATA device %d to have BUSY clear\n", - device); - } else { - ++num_disks_found; - found = 1; - } - } else { - printf("No SATA device %d found, PHY status = 0x%08x\n", - device, - scr_read( - device, - SATA_SCR_STATUS)); - } - break; - } - } while (retries--); - - /* Record whether disk is present, so won't attempt to access it later */ - disk_present[device] = found; - } - - /* post disk detection clean-up */ - for (device = 0; device < CONFIG_SYS_IDE_MAXDEVICE; device++) { - if (disk_present[device]) { - /* set as ata-5 (28-bit) */ - *(sata_regs_base[device] + SATA_DRIVE_CONTROL_OFF) = - 0UL; - - /* clear phy/link errors */ - scr_write(device, SATA_SCR_ERROR, ~0); - - /* clear host errors */ - *(sata_regs_base[device] + SATA_CONTROL_OFF) |= - SATA_SCTL_CLR_ERR; - - /* clear interrupt register as this clears the error bit in the IDE - status register */ - *(sata_regs_base[device] + SATA_INT_CLR_OFF) = ~0UL; - } - } - - return !num_disks_found; -} - diff --git a/package/boot/uboot-oxnas/src/drivers/usb/host/ehci-oxnas.c b/package/boot/uboot-oxnas/src/drivers/usb/host/ehci-oxnas.c deleted file mode 100644 index 6ab05c5116..0000000000 --- a/package/boot/uboot-oxnas/src/drivers/usb/host/ehci-oxnas.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * drivers/usb/host/ehci-oxnas.c - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include -#include -#include -#include - -#include "ehci.h" - -static struct ehci_hcor *ghcor; - -static int start_oxnas_usb_ehci(void) -{ -#ifdef CONFIG_USB_PLLB_CLK - reset_block(SYS_CTRL_RST_PLLB, 0); - enable_clock(SYS_CTRL_CLK_REF600); - - writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV), - SEC_CTRL_PLLB_CTRL0); - /* 600MHz pllb divider for 12MHz */ - writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0), SEC_CTRL_PLLB_DIV_CTRL); -#else - /* ref 300 divider for 12MHz */ - writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0), SYS_CTRL_REF300_DIV); -#endif - - /* Ensure the USB block is properly reset */ - reset_block(SYS_CTRL_RST_USBHS, 1); - reset_block(SYS_CTRL_RST_USBHS, 0); - - reset_block(SYS_CTRL_RST_USBHSPHYA, 1); - reset_block(SYS_CTRL_RST_USBHSPHYA, 0); - - reset_block(SYS_CTRL_RST_USBHSPHYB, 1); - reset_block(SYS_CTRL_RST_USBHSPHYB, 0); - - /* Force the high speed clock to be generated all the time, via serial - programming of the USB HS PHY */ - writel((2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - - writel((1UL << USBHSPHY_TEST_CLK) | - (2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - - writel((0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - - writel((1UL << USBHSPHY_TEST_CLK) | - (0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL); - -#ifdef CONFIG_USB_PLLB_CLK /* use pllb clock */ - writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL); -#else /* use ref300 derived clock */ - writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300, SYS_CTRL_USB_CTRL); -#endif - /* Enable the clock to the USB block */ - enable_clock(SYS_CTRL_CLK_USBHS); - - return 0; -} -int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, - struct ehci_hcor **hcor) -{ - start_oxnas_usb_ehci(); - *hccr = (struct ehci_hccr *)(USB_HOST_BASE + 0x100); - *hcor = (struct ehci_hcor *)((uint32_t)*hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - ghcor = *hcor; - return 0; -} - -int ehci_hcd_stop(int index) -{ - reset_block(SYS_CTRL_RST_USBHS, 1); - disable_clock(SYS_CTRL_CLK_USBHS); - return 0; -} - -extern void __ehci_set_usbmode(int index); -void ehci_set_usbmode(int index) -{ - #define or_txttfill_tuning _reserved_1_[0] - u32 tmp; - - __ehci_set_usbmode(index); - - tmp = ehci_readl(&ghcor->or_txfilltuning); - tmp &= ~0x00ff0000; - tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */ - tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/ - ehci_writel(&ghcor->or_txfilltuning, tmp); - - tmp = ehci_readl(&ghcor->or_txttfill_tuning); - tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */ - ehci_writel(&ghcor->or_txttfill_tuning, tmp); -} diff --git a/package/boot/uboot-oxnas/src/include/configs/ox820.h b/package/boot/uboot-oxnas/src/include/configs/ox820.h deleted file mode 100644 index 9b6522bbe4..0000000000 --- a/package/boot/uboot-oxnas/src/include/configs/ox820.h +++ /dev/null @@ -1,384 +0,0 @@ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_ARM1136 -#define CONFIG_OX820 -#define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_BOARD_EARLY_INIT_F - -#include /* get chip and board defs */ - -/* make cmd_ide.c quiet when compile */ -#define __io - -/*#define CONFIG_ARCH_CPU_INIT*/ -/*#define CONFIG_DISPLAY_CPUINFO*/ -/*#define CONFIG_DISPLAY_BOARDINFO*/ -/*#define CONFIG_BOARD_EARLY_INIT_F*/ -/*#define CONFIG_SKIP_LOWLEVEL_INIT*/ - -/* mem */ -#define CONFIG_SYS_SDRAM_BASE 0x60000000 -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_MIN_SDRAM_SIZE (128 * 1024 * 1024) /* 128 MB */ -#define CONFIG_MAX_SDRAM_SIZE (512 * 1024 * 1024) /* 512 MB */ -#define CONFIG_SRAM_BASE 0x50000000 -#define CONFIG_SRAM_SIZE (64 * 1024) - -/* need do dma so better keep dcache off */ -#define CONFIG_SYS_DCACHE_OFF - -/* clock */ -#define CONFIG_PLLA_FREQ_MHZ 800 -#define CONFIG_RPSCLK 6250000 -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_CLK_FREQ CONFIG_RPSCLK -#define CONFIG_SYS_TIMERBASE TIMER1_BASE -#define CONFIG_TIMER_PRESCALE TIMER_PRESCALE_16 - -/* serial */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_CLK CONFIG_RPSCLK -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_NS16550_COM1 UART_1_BASE -#define CONFIG_CONS_INDEX 1 - -/* ide */ -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_IDE_PLX -#define CONFIG_SYS_IDE_MAXDEVICE 2 -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_IDE_PREINIT -#define CONFIG_LBA48 - -/* nand */ -#define CONFIG_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE STATIC_CS0_BASE -#define NAND_CLE_ADDR_PIN 19 -#define NAND_ALE_ADDR_PIN 18 -#define MTDPARTS_DEFAULT "mtdparts=41000000.nand:" \ - "14m(boot)," \ - "-(ubi)" -#define MTDIDS_DEFAULT "nand0=41000000.nand" -#define UBIPART_DEFAULT "ubi" - -/* net */ -#define CONFIG_DESIGNWARE_ETH -#define CONFIG_DW_ALTDESCRIPTOR -#define CONFIG_MII -#define CONFIG_CMD_MII -#define CONFIG_PHYLIB -#define CONFIG_PHY_REALTEK -#define CONFIG_PHY_ICPLUS - -/* spl */ -#ifdef CONFIG_SPL_BUILD -#define USE_DL_PREFIX /* rename malloc free etc, so we can override them */ -#endif - -#if defined(CONFIG_BOOT_FROM_NAND) || defined(CONFIG_BOOT_FROM_SATA) -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_TEXT_BASE 0x50000000 -#define CONFIG_SPL_STACK (CONFIG_SRAM_BASE + (48 * 1024)) -#define CONFIG_SPL_DISPLAY_PRINT -#define CONFIG_SPL_BSS_DRAM_START 0x65000000 -#define CONFIG_SPL_BSS_DRAM_SIZE 0x01000000 -#define CONFIG_SPL_MALLOC_START 0x66000000 -#endif - -#if defined(CONFIG_BOOT_FROM_NAND) -#define CONFIG_SPL_NAND_SUPPORT -#define BOOT_DEVICE_TYPE "NAND" -#define BOOT_DEVICE_NAND 0xfeedbacc -#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_NAND -#define CONFIG_SPL_NAND_SIMPLE -#define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SYS_NAND_ECCSIZE 512 -#define CONFIG_SYS_NAND_ECCBYTES 6 -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ - 48, 49, 50, 51, 52, 53, 54, 55, \ - 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_NAND_PAGE_SIZE 2048 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -/* pages per erase block */ -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE) -/* nand spl use 1 erase block, and use bit to byte encode for reliability */ -#define CONFIG_SPL_MAX_SIZE (128 * 1024 / 8) -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000 -/* spl kernel load is not enabled */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 -#define CONFIG_CMD_SPL_NAND_OFS 0 -#define CONFIG_CMD_SPL_WRITE_SIZE 1024 -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) -/* CONFIG_BOOT_FROM_NAND end */ - -#elif defined(CONFIG_BOOT_FROM_SATA) -#define CONFIG_SPL_BLOCK_SUPPORT -#define BOOT_DEVICE_TYPE "SATA" -#define BOOT_DEVICE_BLOCK 860202 -#define CONFIG_SPL_BOOT_DEVICE BOOT_DEVICE_BLOCK -#define CONFIG_SPL_MAX_SIZE (36 * 1024) -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_BLOCKDEV_INTERFACE "ide" -#define CONFIG_SPL_BLOCKDEV_ID 0 - -#ifdef CONFIG_BOOT_FROM_FAT /* u-boot in fat partition */ - -#define CONFIG_SPL_FAT_SUPPORT - -#define CONFIG_BLOCKDEV_FAT_BOOT_PARTITION 1 /* first partition */ -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" /* u-boot file name */ -/* enable U-Boot Falcon Mode */ -#define CONFIG_CMD_SPL -#define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "bootargs.bin" /* boot parameters */ -#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "falcon.img" /* kernel */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) - -#elif CONFIG_BOOT_FROM_EXT4 - -#define CONFIG_SPL_EXT4_SUPPORT -#define CONFIG_BLOCKDEV_EXT4_BOOT_PARTITION 1 /* first partition */ -#define CONFIG_SPL_EXT4_LOAD_PAYLOAD_NAME "/boot/u-boot.img" /* u-boot file name */ -/* enable U-Boot Falcon Mode */ -#define CONFIG_CMD_SPL -#define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_EXT4_LOAD_ARGS_NAME "/boot/bootargs.bin" /* boot parameters */ -#define CONFIG_SPL_EXT4_LOAD_KERNEL_NAME "/boot/falcon.img" /* kernel */ -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) - -#else /* u-boot in raw sectors */ - -#define CONFIG_SYS_BLOCK_RAW_MODE_U_BOOT_SECTOR 1024 -/* spl kernel load is not enabled */ -#define CONFIG_SYS_BLOCK_RAW_MODE_KERNEL_SECTOR 4096 -#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTOR 0 -#define CONFIG_SYS_BLOCK_RAW_MODE_ARGS_SECTORS (1024 / 512) -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) - -#endif /* CONFIG_BOOT_FROM_FAT */ -/* CONFIG_BOOT_FROM_SATA end */ - -#else -/* generic, no spl support */ -#endif - -/* boot */ -#define CONFIG_IDENT_STRING " for OXNAS" -#define CONFIG_MACH_TYPE MACH_TYPE_OXNAS -#ifndef CONFIG_SPL_BUILD -/* Enable devicetree support */ -#define CONFIG_OF_LIBFDT -#endif -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_CMDLINE_TAG -#define CONFIG_INITRD_TAG -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_DEFAULT_CONSOLE_PARM "console=ttyS0,115200n8 earlyprintk=serial" -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE) -#define CONFIG_SYS_AUTOLOAD "no" - -#define CONFIG_DEFAULT_CONSOLE CONFIG_DEFAULT_CONSOLE_PARM "\0" -#define CONFIG_BOOTARGS CONFIG_DEFAULT_CONSOLE_PARM -#define CONFIG_BOOTCOMMAND "run nandboot" -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_RESET_TO_RETRY 60 - -#define CONFIG_NETCONSOLE -#define CONFIG_IPADDR 192.168.50.100 -#define CONFIG_SERVERIP 192.168.50.59 - -/* A sane default configuration... - * When booting without a valid environment in ubi, first to loading and booting - * the kernel image directly above U-Boot, maybe both were loaded there by - * another bootloader. - * Also use that same offset (0x90000) to load the rescue image later on (by - * adding it onto the flash address where U-Boot is supposed to be stored by - * the legacy loader, 0x440000, resulting in offset 0x4d0000 on the flash). - * When coming up with a valid environment in ubi, first try to load the - * kernel from a ubi volume kernel, if that fails, fallback to the rescue - * image stored in boot partition. As a last resort try booting via - * DHCP/TFTP. - * In case there is no valid environment, first probe for a uimage in ram left - * behind by the first bootloader on a tftp boot. - * If that fails, switch to normal boot order and save environment. - * The loader is supposed to be written to flash at offset 0x440000 and loaded to - * RAM at 0x64000000 - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "load_kernel_ubi=ubi readvol 0x62000000 kernel;\0" \ - "load_kernel_rescue=nand read 0x62000000 0x4e0000 0x400000;\0" \ - "load_kernel_dhcp=dhcp 0x62000000 oxnas-rescue.bin;\0" \ - "boot_kernel=bootm 0x62000000;\0" \ - "boot_ubi=run load_kernel_ubi && run boot_kernel;\0" \ - "boot_rescue=run load_kernel_rescue && run boot_kernel;\0" \ - "boot_dhcp=run load_kernel_dhcp && run boot_kernel;\0" \ - "normalboot=run boot_ubi; run boot_rescue; run boot_dhcp;\0" \ - "firstboot=bootm 0x640a0000; setenv bootcmd run normalboot; " \ - "setenv firstboot; saveenv; run bootcmd; \0" \ - "bootcmd=run firstboot; \0" \ - "console=" CONFIG_DEFAULT_CONSOLE \ - "bootargs=" CONFIG_BOOTARGS "\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - -/* env */ -#if defined(CONFIG_BOOT_FROM_NAND) -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x000C0000 -#define CONFIG_ENV_SIZE 0x00020000 -#define CONFIG_ENV_OFFSET_REDUND 0x00100000 -#define CONFIG_ENV_SIZE_REDUND 0x00020000 -#define CONFIG_ENV_RANGE (CONFIG_ENV_SIZE * 2) -/* CONFIG_BOOT_FROM_NAND end */ - -#elif defined(CONFIG_BOOT_FROM_SATA) -#ifdef CONFIG_BOOT_FROM_EXT4 -#define CONFIG_ENV_IS_IN_EXT4 -#define CONFIG_START_IDE -#define EXT4_ENV_INTERFACE "ide" -#define EXT4_ENV_DEVICE 0 -#define EXT4_ENV_PART 1 -#define EXT4_ENV_FILE "/boot/u-boot.env" -#define CONFIG_ENV_SIZE (16 * 1024) -#else -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_START_IDE -#define FAT_ENV_INTERFACE "ide" -#define FAT_ENV_DEVICE 0 -#define FAT_ENV_PART 1 -#define FAT_ENV_FILE "u-boot.env" -#define CONFIG_ENV_SIZE (16 * 1024) -#endif -/* CONFIG_BOOT_FROM_SATA end */ -#elif defined(CONFIG_BOOT_FROM_SATA) - -#else -/* generic */ -#define CONFIG_ENV_IS_IN_UBI 1 -#define CONFIG_ENV_UBI_PART UBIPART_DEFAULT -#define CONFIG_ENV_UBI_VOLUME "ubootenv" -#define CONFIG_ENV_UBI_VOLUME_REDUND "ubootenv2" -#define CONFIG_ENV_SIZE (16 * 1024) -#endif - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_TEXT_BASE 0x64000000 -#define CONFIG_SYS_INIT_SP_ADDR 0x65000000 -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "OX820 # " -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size*/ -#define CONFIG_SYS_PBSIZE 1024 /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - -/* usb */ -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_USB_EHCI -#define CONFIG_EHCI_IS_TDI -/* #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x3F */ -#define CONFIG_USB_PLLB_CLK -#define CONFIG_USB_EHCI_OXNAS -#ifndef CONFIG_SPL_BUILD -#define CONFIG_USB_STORAGE -#endif -#define CONFIG_CMD_USB - -/* cmds */ -#define CONFIG_SYS_NO_FLASH -#include - -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_GREPENV -#define CONFIG_CMD_ENV_FLAGS - -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_PXE - -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBI -#define CONFIG_CMD_UBIFS - -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#ifndef CONFIG_SPL_BUILD -#define CONFIG_CMD_EXT4_WRITE -#endif - -#define CONFIG_CMD_ZIP -#define CONFIG_CMD_UNZIP -#define CONFIG_CMD_TIME -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_MD5SUM -#define CONFIG_CMD_HASH -#define CONFIG_CMD_INI -#define CONFIG_CMD_GETTIME -#define CONFIG_CMD_BOOTMENU -#define CONFIG_CMD_ELF -#define CONFIG_CMD_BOOTZ - -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION - -/* for CONFIG_CMD_MTDPARTS */ -#define CONFIG_MTD_DEVICE -/* for CONFIG_CMD_UBI */ -#define CONFIG_MTD_PARTITIONS -/* for CONFIG_CMD_UBI */ -#define CONFIG_RBTREE - -/* optional, for CONFIG_CMD_BOOTM & required by CONFIG_CMD_UBIFS */ -#define CONFIG_LZO -#define CONFIG_LZMA -#define CONFIG_BZIP2 - -/* for CONFIG_CMD_ZIP */ -#define CONFIG_GZIP_COMPRESSED -/* for CONFIG_CMD_MD5SUM */ -#define CONFIG_MD5 -#define CONFIG_MD5SUM_VERIFY -/* enable CONFIG_CMD_HASH's verification feature */ -#define CONFIG_HASH_VERIFY -#define CONFIG_REGEX -/* for CONFIG_CMD_BOOTMENU & CONFIG_CMD_PXE */ -#define CONFIG_MENU - -/* for new FIT uImage format generated in OpenWrt */ -#define CONFIG_FIT - -#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-oxnas/src/tools/mkox820crc.c b/package/boot/uboot-oxnas/src/tools/mkox820crc.c deleted file mode 100644 index 873706245b..0000000000 --- a/package/boot/uboot-oxnas/src/tools/mkox820crc.c +++ /dev/null @@ -1,126 +0,0 @@ -/* J J Larworthy 27 September 2006 */ - -/* file to read the boot sector of a dis and the loaded image and report - * if the boot rom would accept the data as intact and suitable for use - */ - -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -extern uint32_t crc32(uint32_t, const unsigned char *, unsigned int); - -#define NUMBER_VECTORS 12 -struct { - unsigned int start_vector[NUMBER_VECTORS]; - char code[4]; - unsigned int header_length; - unsigned int reserved[3]; - unsigned int length; - unsigned int img_CRC; - unsigned int CRC; -} img_header; - -void print_usage(void) -{ - printf("update_header file.bin\n"); -} - -void print_header(void) -{ - int i; - - printf("vectors in header\n"); - for (i = 0; i < NUMBER_VECTORS; i++) { - printf("%d:0x%08x\n", i, img_header.start_vector[i]); - } - printf("length:%8x\nimg_CRC:0x%08x\nHeader CRC:0x%08x\n", - img_header.length, img_header.img_CRC, img_header.CRC); -} - -int main(int argc, char **argv) -{ - int in_file; - int status; - int unsigned crc; - int file_length; - int len; - - struct stat file_stat; - - void *executable; - - in_file = open(argv[1], O_RDWR); - - if (in_file < 0) { - printf("failed to open file:%s\n", argv[optind]); - return -ENOENT; - } - - status = fstat(in_file, &file_stat); - - /* read header and obtain size of image */ - status = read(in_file, &img_header, sizeof(img_header)); - - file_length = file_stat.st_size - sizeof(img_header); - - if (img_header.length != file_length) { - printf("size in header:%d, size of file: %d\n", - img_header.length, file_length); - } - img_header.length = file_length; - - /* read working image and CRC */ - executable = malloc(file_length); - - status = read(in_file, executable, file_length); - - if (status != file_length) { - printf("Failed to load image\n"); - free(executable); - return -ENOENT; - } - - /* verify image CRC */ - crc = crc32(0, (const unsigned char *) executable, img_header.length); - - if (crc != img_header.img_CRC) { - printf("New Image CRC:0x%08x, hdr:0x%08x\n", crc, - img_header.img_CRC); - img_header.img_CRC = crc; - } - memcpy(img_header.code, "BOOT", 4); - img_header.header_length = sizeof(img_header); - - /* check header CRC */ - crc = crc32(0, (const unsigned char *) &img_header, - sizeof(img_header) - sizeof(unsigned int)); - if (crc != img_header.CRC) { - printf("New header CRC - crc:0x%08x hdr:0x%08x\n", crc, - img_header.CRC); - img_header.CRC = crc; - } - - /* re-write the file */ - status = lseek(in_file, 0, SEEK_SET); - if (status != 0) { - printf("failed to rewind\n"); - free(executable); - return 1; - } - len = write(in_file, &img_header, sizeof(img_header)); - assert(len == sizeof(img_header)); - len = write(in_file, executable, file_length); - assert(len == file_length); - close(in_file); - free(executable); - - return 0; -} diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile deleted file mode 100644 index 2884a66cc7..0000000000 --- a/target/linux/oxnas/Makefile +++ /dev/null @@ -1,20 +0,0 @@ -include $(TOPDIR)/rules.mk - -ARCH:=arm -BOARD:=oxnas -BOARDNAME:=PLXTECH/Oxford NAS782x/OX8xx -SUBTARGETS:=ox810se ox820 -FEATURES:=gpio ramdisk rtc squashfs -DEVICE_TYPE:=nas - -KERNEL_PATCHVER:=5.15 - -include $(INCLUDE_DIR)/target.mk - -DEFAULT_PACKAGES += \ - kmod-button-hotplug kmod-input-gpio-keys-polled \ - kmod-leds-gpio uboot-envtools - -KERNELNAME:=zImage dtbs - -$(eval $(call BuildTarget)) diff --git a/target/linux/oxnas/base-files/etc/board.d/02_network b/target/linux/oxnas/base-files/etc/board.d/02_network deleted file mode 100644 index 747034c3dd..0000000000 --- a/target/linux/oxnas/base-files/etc/board.d/02_network +++ /dev/null @@ -1,60 +0,0 @@ - -. /lib/functions/uci-defaults.sh -. /lib/functions/system.sh - -bootloader_cmdline_var() { - local param - local pval - for arg in $(cat /proc/device-tree/chosen/bootloader-args); do - param="$(echo $arg | cut -d'=' -f 1)" - pval="$(echo $arg | cut -d'=' -f 2-)" - - if [ "$param" = "$1" ]; then - echo "$pval" - fi - done -} - -legacy_boot_mac_adr() { - local macstr - local oIFS - macstr="$(bootloader_cmdline_var mac_adr)" - oIFS="$IFS" - IFS="," - set -- $macstr - printf "%02x:%02x:%02x:%02x:%02x:%02x" $1 $2 $3 $4 $5 $6 - IFS="$oIFS" -} - -oxnas_setup_interfaces() -{ - local board="$1" - - case $board in - *) - ucidef_set_interface_lan "eth0" "dhcp" - ;; - esac -} - -oxnas_setup_macs() -{ - local board="$1" - local lan_mac="" - - case $board in - shuttle,kd20) - lan_mac="$(legacy_boot_mac_adr)" - ;; - esac - - [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac -} - -board_config_update -board=$(board_name) -oxnas_setup_interfaces $board -oxnas_setup_macs $board -board_config_flush - -exit 0 diff --git a/target/linux/oxnas/base-files/etc/init.d/set-irq-affinity b/target/linux/oxnas/base-files/etc/init.d/set-irq-affinity deleted file mode 100755 index 8ab066ff4c..0000000000 --- a/target/linux/oxnas/base-files/etc/init.d/set-irq-affinity +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh /etc/rc.common - -START=99 - -get_irq() { - local name="$1" - grep -m 1 "$name" /proc/interrupts | cut -d: -f1 | sed 's, *,,' -} - -set_irq_affinity() { - local name="$1" - local val="$2" - local irq="$(get_irq "$name")" - [ -n "$irq" ] || return - echo "$val" > "/proc/irq/$irq/smp_affinity" -} - -start() { - set_irq_affinity ehci_hcd 2 - set_irq_affinity xhci_hcd 2 - set_irq_affinity sata 2 -} diff --git a/target/linux/oxnas/base-files/lib/upgrade/platform.sh b/target/linux/oxnas/base-files/lib/upgrade/platform.sh deleted file mode 100644 index 9e8a94b501..0000000000 --- a/target/linux/oxnas/base-files/lib/upgrade/platform.sh +++ /dev/null @@ -1,9 +0,0 @@ -REQUIRE_IMAGE_METADATA=1 - -platform_check_image() { - return 0 -} - -platform_do_upgrade() { - nand_do_upgrade $1 -} diff --git a/target/linux/oxnas/config-5.15 b/target/linux/oxnas/config-5.15 deleted file mode 100644 index 0cf06ee580..0000000000 --- a/target/linux/oxnas/config-5.15 +++ /dev/null @@ -1,291 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_CPU_AUTO=y -# CONFIG_ARCH_MULTI_V4 is not set -# CONFIG_ARCH_MULTI_V4T is not set -CONFIG_ARCH_MULTI_V4_V5=y -CONFIG_ARCH_MULTI_V5=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OXNAS=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=5 -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEBUG_FS=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_PM=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMA=y -CONFIG_CMA_ALIGNMENT=8 -CONFIG_CMA_AREAS=7 -# CONFIG_CMA_DEBUG is not set -# CONFIG_CMA_DEBUGFS is not set -CONFIG_CMA_SIZE_MBYTES=64 -# CONFIG_CMA_SIZE_SEL_MAX is not set -CONFIG_CMA_SIZE_SEL_MBYTES=y -# CONFIG_CMA_SIZE_SEL_MIN is not set -# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set -# CONFIG_CMA_SYSFS is not set -CONFIG_CMDLINE_PARTITION=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_OXNAS=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTIG_ALLOC=y -CONFIG_COREDUMP=y -CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_ARM926T=y -# CONFIG_CPU_CACHE_ROUND_ROBIN is not set -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_PM=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V4WBI=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRASH_CORE=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LZ4=y -CONFIG_CRYPTO_RNG2=y -CONFIG_DEBUG_ALIGN_RODATA=y -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DMA_CMA=y -CONFIG_DMA_OPS=y -CONFIG_DMA_REMAP=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -CONFIG_DWMAC_GENERIC=y -CONFIG_DWMAC_OXNAS=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_ELF_CORE=y -CONFIG_FAT_FS=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FREEZER=y -CONFIG_FWNODE_MDIO=y -# CONFIG_FW_CACHE is not set -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_GENERIC_PLATFORM=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HID=y -CONFIG_HID_GENERIC=y -CONFIG_HWMON=y -CONFIG_HZ_FIXED=0 -CONFIG_ICPLUS_PHY=y -CONFIG_INET_DIAG=y -# CONFIG_INET_DIAG_DESTROY is not set -# CONFIG_INET_RAW_DIAG is not set -CONFIG_INET_TCP_DIAG=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_ISDN is not set -# CONFIG_JFFS2_FS is not set -CONFIG_KALLSYMS=y -CONFIG_KERNEL_GZIP=y -# CONFIG_KERNEL_XZ is not set -CONFIG_KEXEC=y -CONFIG_KEXEC_CORE=y -# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_CPU=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_ONESHOT=y -CONFIG_LIBFDT=y -CONFIG_LOCALVERSION_AUTO=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LZ4_COMPRESS=y -CONFIG_LZ4_DECOMPRESS=y -CONFIG_LZO_DECOMPRESS=y -# CONFIG_MACH_OX810SE is not set -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MEMFD_CREATE=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SELFTESTS=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OXNAS_RPS_TIMER=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_PCS_XPCS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -CONFIG_PHY_OXNAS=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_OXNAS=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PM=y -CONFIG_PM_CLK=y -CONFIG_PM_SLEEP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_OXNAS=y -CONFIG_PPS=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_TRACE=y -CONFIG_RD_BZIP2=y -CONFIG_RD_GZIP=y -CONFIG_RD_LZ4=y -CONFIG_RD_LZMA=y -CONFIG_RD_LZO=y -CONFIG_RD_XZ=y -CONFIG_REALTEK_PHY=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RESET_OXNAS=y -CONFIG_SCHED_DEBUG=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SERIO=y -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_SERPORT=y -CONFIG_SGL_ALLOC=y -CONFIG_SOCK_DIAG=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SRCU=y -CONFIG_STACKTRACE=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -# CONFIG_STRIP_ASM_SYMS is not set -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -CONFIG_SWPHY=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_TRACE_CLOCK=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VERSATILE_FPGA_IRQ=y -CONFIG_VERSATILE_FPGA_IRQ_NR=4 -CONFIG_VFAT_FS=y -# CONFIG_VFP is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_WATCHDOG is not set -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_X86=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts deleted file mode 100644 index c0edc8cf84..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts +++ /dev/null @@ -1,167 +0,0 @@ -/dts-v1/; - -#include "ox820.dtsi" - -#include -#include - -/ { - model = "Akitio MyCloud"; - - compatible = "akitio,mycloud", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH - &gpio1 10 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c>; - i2c-gpio,delay-us = <10>; - #address-cells = <1>; - #size-cells = <0>; - ds1307: rtc@68 { - compatible = "dallas,ds1307"; - reg = <0x68>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_buttons>; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - power { - label = "power"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_leds>; - led_status: status { - label = "akitio:red:status"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_poweroff>; - gpios = <&gpio1 13 GPIO_SINGLE_ENDED>; - }; -}; - -&pinctrl { - pinctrl_i2c: i2c-0 { - i2c { - pins = "gpio41", "gpio42"; /* MF_B9, MF_B10 */ - function = "gpio"; - /* ToDo: find a way to set debounce for those pins */ - }; - }; - pinctrl_buttons: buttons-0 { - buttons { - pins = "gpio11", "gpio38"; /* MF_A11, MF_B6 GPIO */ - function = "gpio"; - }; - }; - pinctrl_leds: leds-0 { - leds { - pins = "gpio29"; /* MF_A29 GPIO */ - function = "gpio"; - }; - }; - pinctrl_poweroff: poweroff-0 { - poweroff { - pins = "gpio45"; /* MF_B13 GPIO */ - function = "gpio"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "boot"; - reg = <0x0 0x26c0000>; - }; - - partition@26c0000 { - label = "ubi"; - reg = <0x26c0000 0xd940000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; - -&ehci { - status = "okay"; -}; - -&sata { - status = "okay"; - nr-ports = <2>; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplugpro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplugpro.dts deleted file mode 100644 index 04cf4e31f9..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplugpro.dts +++ /dev/null @@ -1,131 +0,0 @@ -/* - * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 - * - * Copyright (C) 2016 Neil Armstrong - * - * Licensed under GPLv2 or later - */ - -/dts-v1/; -#include "ox820.dtsi" -#include - -/ { - model = "Cloud Engines PogoPlug Pro"; - - compatible = "cloudengines,pogoplugpro", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - led-boot = &led_status; - led-failsafe = &led_warn; - led-running = &led_act; - led-upgrade = &led_warn; - }; - - leds { - compatible = "gpio-leds"; - - led_status: blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - led_warn: orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - led_act: green { - label = "pogoplug:green"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "stage1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "u-boot"; - reg = <0x00040000 0x00380000>; - read-only; - }; - - partition@3c0000 { - label = "u-boot-env"; - reg = <0x003c0000 0x00080000>; - }; - - partition@440000 { - label = "kernel"; - reg = <0x00440000 0x009c0000>; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -&ehci { - status = "okay"; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; - -&sata { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg-212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg-212.dts deleted file mode 100644 index 6abab23586..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg-212.dts +++ /dev/null @@ -1,139 +0,0 @@ -/dts-v1/; - -#include "ox820.dtsi" - -#include -#include - -/ { - model = "MitraStar Technology Corp. STG-212"; - - compatible = "mitrastar,stg-212", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 128Mbytes DDR */ - reg = <0x60000000 0x8000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - led-boot = &led_status; - led-failsafe = &led_warn; - led-running = &led_status; - led-upgrade = &led_warn; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - reset { - label = "reset"; - gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - copy { - label = "copy"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - led_status: status { - label = "zyxel:blue:status"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; - led_warn: status2 { - label = "zyxel:red:status"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - copy { - label = "zyxel:orange:copy"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - trigger-sources = <&ehci_port1>, <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH - &gpio1 10 GPIO_ACTIVE_HIGH>; - i2c-gpio,delay-us = <10>; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "stage1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "u-boot"; - reg = <0x00040000 0x00380000>; - read-only; - }; - - partition@3c0000 { - label = "u-boot-env"; - reg = <0x003c0000 0x00080000>; - }; - - partition@440000 { - label = "kernel"; - reg = <0x00440000 0x009c0000>; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; - -&ehci { - status = "okay"; -}; - -&sata { - status = "okay"; -}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts deleted file mode 100644 index 2cff439c25..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts +++ /dev/null @@ -1,251 +0,0 @@ -/dts-v1/; - -#include "ox820.dtsi" - -#include -#include -#include - -/ { - model = "Shuttle KD20"; - - compatible = "shuttle,kd20", "oxsemi,ox820"; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - /* 256Mbytes DDR */ - reg = <0x60000000 0x10000000>; - }; - - aliases { - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; - led-boot = &led_status; - led-failsafe = &led_warn; - led-running = &led_status; - led-upgrade = &led_warn; - }; - - thermal-zones { - chassis-thermal { - /* Poll every 20 seconds */ - polling-delay = <20000>; - /* Poll every 2nd second when cooling */ - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>, <&hdd1_temp>; - - trips { - chassis_alert0: chassis-alert0 { - /* At 43 degrees turn on fan */ - temperature = <43000>; - hysteresis = <3000>; - type = "active"; - }; - - chassis_alert1: chassis-alert1 { - /* At 60 degrees emergency shutdown */ - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&chassis_alert0>; - cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - i2c-gpio { - compatible = "i2c-gpio"; - sda-gpios = <&gpio1 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - sck-gpios = <&gpio1 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <10>; - #address-cells = <1>; - #size-cells = <0>; - - rtc0: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - power { - label = "power"; - gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - reset { - label = "reset"; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - eject1 { - label = "eject1"; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - eject2 { - label = "eject2"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - linux,code = <162>; - }; - }; - - leds { - compatible = "gpio-leds"; - led_status: status { - label = "kd20:blue:status"; - gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - }; - led_warn: status2 { - label = "kd20:red:status"; - gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - }; - hdd1blue { - label = "kd20:blue:hdd1"; - gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - }; - hdd1red { - label = "kd20:red:hdd1"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; - hdd2blue { - label = "kd20:blue:hdd2"; - gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - }; - hdd2red { - label = "kd20:red:hdd2"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - usb { - label = "kd20:blue:usb"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - trigger-sources = <&ehci_port1>, <&ehci_port2>; - linux,default-trigger = "usbport"; - }; - }; - - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - - system_fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 3000 1>; - #cooling-cells = <2>; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&nandc { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - - nand@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - nand-ecc-mode = "soft"; - nand-ecc-algo = "hamming"; - - partition@0 { - label = "stage1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "u-boot"; - reg = <0x00040000 0x001e0000>; - read-only; - }; - - partition@220000 { - label = "u-boot-env"; - reg = <0x00220000 0x00020000>; - }; - - partition@240000 { - label = "initrd"; - reg = <0x00240000 0x00600000>; - }; - - partition@840000 { - label = "kernel"; - reg = <0x00840000 0x007C0000>; - }; - - partition@e00000 { - label = "ubi"; - reg = <0x01000000 0x07000000>; - }; - }; -}; - -ða { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; -}; - -&ehci { - status = "okay"; -}; - -&sata { - status = "okay"; - nr-ports = <2>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; diff --git a/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h b/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h deleted file mode 100644 index fbc372787e..0000000000 --- a/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/include/asm-arm/arch-oxnas/uncompress.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#define OXNAS_UART1_BASE 0x44200000 - -static inline void putc(int c) -{ - static volatile unsigned char *uart = - (volatile unsigned char *)OXNAS_UART1_BASE; - - while (!(uart[5] & 0x20)) { /* LSR reg THR empty bit */ - barrier(); - } - uart[0] = c; /* THR register */ -} - -static inline void flush(void) -{ -} - -#define arch_decomp_setup() - -#define arch_decomp_wdog() - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c deleted file mode 100644 index bd39ce7b1b..0000000000 --- a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c +++ /dev/null @@ -1,2507 +0,0 @@ -/* - * sata_oxnas - * A driver to interface the 934 based sata core present in the ox820 - * with libata and scsi - * based on sata_oxnas driver by Ma Haijun - * based on ox820 sata code by: - * Copyright (c) 2007 Oxford Semiconductor Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) -{ - u32 val = readl_relaxed(p); - - val &= ~mask; - writel_relaxed(val, p); -} - -static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) -{ - u32 val = readl_relaxed(p); - - val |= mask; - writel_relaxed(val, p); -} - -static inline void oxnas_register_value_mask(void __iomem *p, - unsigned mask, unsigned new_value) -{ - /* TODO sanity check mask & new_value = new_value */ - u32 val = readl_relaxed(p); - - val &= ~mask; - val |= new_value; - writel_relaxed(val, p); -} - -/* sgdma request structure */ -struct sgdma_request { - volatile u32 qualifier; - volatile u32 control; - dma_addr_t src_pa; - dma_addr_t dst_pa; -} __packed __aligned(4); - - -/* Controller information */ -enum { - SATA_OXNAS_MAX_PRD = 63, - SATA_OXNAS_DMA_SIZE = SATA_OXNAS_MAX_PRD * - sizeof(struct ata_bmdma_prd) + - sizeof(struct sgdma_request), - SATA_OXNAS_MAX_PORTS = 2, - /** The different Oxsemi SATA core version numbers */ - SATA_OXNAS_CORE_VERSION = 0x1f3, - SATA_OXNAS_IRQ_FLAG = IRQF_SHARED, - SATA_OXNAS_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | - ATA_FLAG_NO_ATAPI /*| ATA_FLAG_NCQ*/), - SATA_OXNAS_QUEUE_DEPTH = 32, - - SATA_OXNAS_DMA_BOUNDARY = 0xFFFFFFFF, -}; - - -/* - * SATA Port Registers - */ -enum { - /** sata host port register offsets */ - ORB1 = 0x00, - ORB2 = 0x04, - ORB3 = 0x08, - ORB4 = 0x0C, - ORB5 = 0x10, - MASTER_STATUS = 0x10, - FIS_CTRL = 0x18, - FIS_DATA = 0x1C, - INT_STATUS = 0x30, - INT_CLEAR = 0x30, - INT_ENABLE = 0x34, - INT_DISABLE = 0x38, - VERSION = 0x3C, - SATA_CONTROL = 0x5C, - SATA_COMMAND = 0x60, - HID_FEATURES = 0x64, - PORT_CONTROL = 0x68, - DRIVE_CONTROL = 0x6C, - /** These registers allow access to the link layer registers - that reside in a different clock domain to the processor bus */ - LINK_DATA = 0x70, - LINK_RD_ADDR = 0x74, - LINK_WR_ADDR = 0x78, - LINK_CONTROL = 0x7C, - /* window control */ - WIN1LO = 0x80, - WIN1HI = 0x84, - WIN2LO = 0x88, - WIN2HI = 0x8C, - WIN0_CONTROL = 0x90, -}; - -/** sata port register bits */ -enum{ - /** - * commands to issue in the master status to tell it to move shadow , - * registers to the actual device , - */ - SATA_OPCODE_MASK = 0x00000007, - CMD_WRITE_TO_ORB_REGS_NO_COMMAND = 0x4, - CMD_WRITE_TO_ORB_REGS = 0x2, - CMD_SYNC_ESCAPE = 0x7, - CMD_CORE_BUSY = (1 << 7), - CMD_DRIVE_SELECT_SHIFT = 12, - CMD_DRIVE_SELECT_MASK = (0xf << CMD_DRIVE_SELECT_SHIFT), - - /** interrupt bits */ - INT_END_OF_CMD = 1 << 0, - INT_LINK_SERROR = 1 << 1, - INT_ERROR = 1 << 2, - INT_LINK_IRQ = 1 << 3, - INT_REG_ACCESS_ERR = 1 << 7, - INT_BIST_FIS = 1 << 11, - INT_MASKABLE = INT_END_OF_CMD | - INT_LINK_SERROR | - INT_ERROR | - INT_LINK_IRQ | - INT_REG_ACCESS_ERR | - INT_BIST_FIS, - INT_WANT = INT_END_OF_CMD | - INT_LINK_SERROR | - INT_REG_ACCESS_ERR | - INT_ERROR, - INT_ERRORS = INT_LINK_SERROR | - INT_REG_ACCESS_ERR | - INT_ERROR, - - /** raw interrupt bits, unmaskable, but do not generate interrupts */ - RAW_END_OF_CMD = INT_END_OF_CMD << 16, - RAW_LINK_SERROR = INT_LINK_SERROR << 16, - RAW_ERROR = INT_ERROR << 16, - RAW_LINK_IRQ = INT_LINK_IRQ << 16, - RAW_REG_ACCESS_ERR = INT_REG_ACCESS_ERR << 16, - RAW_BIST_FIS = INT_BIST_FIS << 16, - RAW_WANT = INT_WANT << 16, - RAW_ERRORS = INT_ERRORS << 16, - - /** - * variables to write to the device control register to set the current - * device, ie. master or slave. - */ - DR_CON_48 = 2, - DR_CON_28 = 0, - - SATA_CTL_ERR_MASK = 0x00000016, - -}; - -/* ATA SGDMA register offsets */ -enum { - SGDMA_CONTROL = 0x0, - SGDMA_STATUS = 0x4, - SGDMA_REQUESTPTR = 0x8, - SGDMA_RESETS = 0xC, - SGDMA_CORESIZE = 0x10, -}; - -/* DMA controller register offsets */ -enum { - DMA_CONTROL = 0x0, - DMA_CORESIZE = 0x20, - - DMA_CONTROL_RESET = (1 << 12), -}; - -enum { - /* see DMA core docs for the values. Out means from memory (bus A) out - * to disk (bus B) */ - SGDMA_REQCTL0OUT = 0x0497c03d, - /* burst mode disabled when no micro code used */ - SGDMA_REQCTL0IN = 0x0493a3c1, - SGDMA_REQCTL1OUT = 0x0497c07d, - SGDMA_REQCTL1IN = 0x0497a3c5, - SGDMA_CONTROL_NOGO = 0x3e, - SGDMA_CONTROL_GO = SGDMA_CONTROL_NOGO | 1, - SGDMA_ERRORMASK = 0x3f, - SGDMA_BUSY = 0x80, - - SGDMA_RESETS_CTRL = 1 << 0, - SGDMA_RESETS_ARBT = 1 << 1, - SGDMA_RESETS_AHB = 1 << 2, - SGDMA_RESETS_ALL = SGDMA_RESETS_CTRL | - SGDMA_RESETS_ARBT | - SGDMA_RESETS_AHB, - - /* Final EOTs */ - SGDMA_REQQUAL = 0x00220001, - -}; - -/** SATA core register offsets */ -enum { - DM_DBG1 = 0x000, - RAID_SET = 0x004, - DM_DBG2 = 0x008, - DATACOUNT_PORT0 = 0x010, - DATACOUNT_PORT1 = 0x014, - CORE_INT_STATUS = 0x030, - CORE_INT_CLEAR = 0x030, - CORE_INT_ENABLE = 0x034, - CORE_INT_DISABLE = 0x038, - CORE_REBUILD_ENABLE = 0x050, - CORE_FAILED_PORT_R = 0x054, - DEVICE_CONTROL = 0x068, - EXCESS = 0x06C, - RAID_SIZE_LOW = 0x070, - RAID_SIZE_HIGH = 0x074, - PORT_ERROR_MASK = 0x078, - IDLE_STATUS = 0x07C, - RAID_CONTROL = 0x090, - DATA_PLANE_CTRL = 0x0AC, - CORE_DATAPLANE_STAT = 0x0b8, - PROC_PC = 0x100, - CONFIG_IN = 0x3d8, - PROC_START = 0x3f0, - PROC_RESET = 0x3f4, - UCODE_STORE = 0x1000, - RAID_WP_BOT_LOW = 0x1FF0, - RAID_WP_BOT_HIGH = 0x1FF4, - RAID_WP_TOP_LOW = 0x1FF8, - RAID_WP_TOP_HIGH = 0x1FFC, - DATA_MUX_RAM0 = 0x8000, - DATA_MUX_RAM1 = 0xA000, - PORT_SIZE = 0x10000, -}; - -enum { - /* Sata core debug1 register bits */ - CORE_PORT0_DATA_DIR_BIT = 20, - CORE_PORT1_DATA_DIR_BIT = 21, - CORE_PORT0_DATA_DIR = 1 << CORE_PORT0_DATA_DIR_BIT, - CORE_PORT1_DATA_DIR = 1 << CORE_PORT1_DATA_DIR_BIT, - - /** sata core control register bits */ - SCTL_CLR_ERR = 0x00003016, - RAID_CLR_ERR = 0x0000011e, - - /* Interrupts direct from the ports */ - NORMAL_INTS_WANTED = 0x00000303, - - /* shift these left by port number */ - COREINT_HOST = 0x00000001, - COREINT_END = 0x00000100, - CORERAW_HOST = COREINT_HOST << 16, - CORERAW_END = COREINT_END << 16, - - /* Interrupts from the RAID controller only */ - RAID_INTS_WANTED = 0x00008300, - - /* The bits in the IDLE_STATUS that, when set indicate an idle core */ - IDLE_CORES = (1 << 18) | (1 << 19), - - /* Data plane control error-mask mask and bit, these bit in the data - * plane control mask out errors from the ports that prevent the SGDMA - * care from sending an interrupt */ - DPC_ERROR_MASK = 0x00000300, - DPC_ERROR_MASK_BIT = 0x00000100, - /* enable jbod micro-code */ - DPC_JBOD_UCODE = 1 << 0, - DPC_FIS_SWCH = 1 << 1, - - /** Device Control register bits */ - DEVICE_CONTROL_DMABT = 1 << 4, - DEVICE_CONTROL_ABORT = 1 << 2, - DEVICE_CONTROL_PAD = 1 << 3, - DEVICE_CONTROL_PADPAT = 1 << 16, - DEVICE_CONTROL_PRTRST = 1 << 8, - DEVICE_CONTROL_RAMRST = 1 << 12, - DEVICE_CONTROL_ATA_ERR_OVERRIDE = 1 << 28, - - /** oxsemi HW raid modes */ - OXNASSATA_NOTRAID = 0, - OXNASSATA_RAID0 = 1, - OXNASSATA_RAID1 = 2, - /** OX820 specific HW-RAID register values */ - RAID_TWODISKS = 3, - UNKNOWN_MODE = ~0, - - CONFIG_IN_RESUME = 2, -}; - -/* SATA PHY Registers */ -enum { - PHY_STAT = 0x00, - PHY_DATA = 0x04, -}; - -enum { - STAT_READ_VALID = (1 << 21), - STAT_CR_ACK = (1 << 20), - STAT_CR_READ = (1 << 19), - STAT_CR_WRITE = (1 << 18), - STAT_CAP_DATA = (1 << 17), - STAT_CAP_ADDR = (1 << 16), - - STAT_ACK_ANY = STAT_CR_ACK | - STAT_CR_READ | - STAT_CR_WRITE | - STAT_CAP_DATA | - STAT_CAP_ADDR, - - CR_READ_ENABLE = (1 << 16), - CR_WRITE_ENABLE = (1 << 17), - CR_CAP_DATA = (1 << 18), -}; - -enum { - /* Link layer registers */ - SERROR_IRQ_MASK = 5, -}; - -enum { - OXNAS_SATA_SOFTRESET = 1, - OXNAS_SATA_REINIT = 2, -}; - -enum { - OXNAS_SATA_UCODE_RAID0, - OXNAS_SATA_UCODE_RAID1, - OXNAS_SATA_UCODE_JBOD, - OXNAS_SATA_UCODE_NONE, -}; - -enum { - SATA_UNLOCKED, - SATA_WRITER, - SATA_READER, - SATA_REBUILD, - SATA_HWRAID, - SATA_SCSI_STACK -}; - -typedef irqreturn_t (*oxnas_sata_isr_callback_t)(int, unsigned long, int); - -struct sata_oxnas_host_priv { - void __iomem *port_base; - void __iomem *dmactl_base; - void __iomem *sgdma_base; - void __iomem *core_base; - void __iomem *phy_base; - dma_addr_t dma_base; - void __iomem *dma_base_va; - size_t dma_size; - int irq; - int n_ports; - int current_ucode; - u32 port_frozen; - u32 port_in_eh; - struct clk *clk; - struct reset_control *rst_sata; - struct reset_control *rst_link; - struct reset_control *rst_phy; - spinlock_t phy_lock; - spinlock_t core_lock; - int core_locked; - int reentrant_port_no; - int hw_lock_count; - int direct_lock_count; - void *locker_uid; - int current_locker_type; - int scsi_nonblocking_attempts; - oxnas_sata_isr_callback_t isr_callback; - void *isr_arg; - wait_queue_head_t fast_wait_queue; - wait_queue_head_t scsi_wait_queue; -}; - - -struct sata_oxnas_port_priv { - void __iomem *port_base; - void __iomem *dmactl_base; - void __iomem *sgdma_base; - void __iomem *core_base; - struct sgdma_request *sgdma_request; - dma_addr_t sgdma_request_pa; -}; - -static u8 sata_oxnas_check_status(struct ata_port *ap); -static int sata_oxnas_cleanup(struct ata_host *ah); -static void sata_oxnas_tf_load(struct ata_port *ap, - const struct ata_taskfile *tf); -static void sata_oxnas_irq_on(struct ata_port *ap); -static void sata_oxnas_post_reset_init(struct ata_port *ap); - -static int sata_oxnas_acquire_hw(struct ata_port *ap, int may_sleep, - int timeout_jiffies); -static void sata_oxnas_release_hw(struct ata_port *ap); - -static const void *HW_LOCKER_UID = (void *)0xdeadbeef; - -/*************************************************************************** -* ASIC access -***************************************************************************/ -static void wait_cr_ack(void __iomem *phy_base) -{ - while ((ioread32(phy_base + PHY_STAT) >> 16) & 0x1f) - ; /* wait for an ack bit to be set */ -} - -static u16 read_cr(void __iomem *phy_base, u16 address) -{ - iowrite32((u32)address, phy_base + PHY_STAT); - wait_cr_ack(phy_base); - iowrite32(CR_READ_ENABLE, phy_base + PHY_DATA); - wait_cr_ack(phy_base); - return (u16)ioread32(phy_base + PHY_STAT); -} - -static void write_cr(void __iomem *phy_base, u16 data, u16 address) -{ - iowrite32((u32)address, phy_base + PHY_STAT); - wait_cr_ack(phy_base); - iowrite32((data | CR_CAP_DATA), phy_base + PHY_DATA); - wait_cr_ack(phy_base); - iowrite32(CR_WRITE_ENABLE, phy_base + PHY_DATA); - wait_cr_ack(phy_base); -} - -#define PH_GAIN 2 -#define FR_GAIN 3 -#define PH_GAIN_OFFSET 6 -#define FR_GAIN_OFFSET 8 -#define PH_GAIN_MASK (0x3 << PH_GAIN_OFFSET) -#define FR_GAIN_MASK (0x3 << FR_GAIN_OFFSET) -#define USE_INT_SETTING (1<<5) - -void workaround5458(struct ata_host *ah) -{ - struct sata_oxnas_host_priv *hd = ah->private_data; - void __iomem *phy_base = hd->phy_base; - u16 rx_control; - unsigned i; - - for (i = 0; i < 2; i++) { - rx_control = read_cr(phy_base, 0x201d + (i << 8)); - rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK); - rx_control |= PH_GAIN << PH_GAIN_OFFSET; - rx_control |= (FR_GAIN << FR_GAIN_OFFSET) | USE_INT_SETTING; - write_cr(phy_base, rx_control, 0x201d+(i<<8)); - } -} - -/** - * allows access to the link layer registers - * @param link_reg the link layer register to access (oxsemi indexing ie - * 00 = static config, 04 = phy ctrl) - */ -void sata_oxnas_link_write(struct ata_port *ap, unsigned int link_reg, u32 val) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - struct sata_oxnas_host_priv *hd = ap->host->private_data; - void __iomem *port_base = pd->port_base; - u32 patience; - unsigned long flags; - - DPRINTK("P%d [0x%02x]->0x%08x\n", ap->port_no, link_reg, val); - - spin_lock_irqsave(&hd->phy_lock, flags); - iowrite32(val, port_base + LINK_DATA); - - /* accessed twice as a work around for a bug in the SATA abp bridge - * hardware (bug 6828) */ - iowrite32(link_reg , port_base + LINK_WR_ADDR); - ioread32(port_base + LINK_WR_ADDR); - - for (patience = 0x100000; patience > 0; --patience) { - if (ioread32(port_base + LINK_CONTROL) & 0x00000001) - break; - } - spin_unlock_irqrestore(&hd->phy_lock, flags); -} - -static int sata_oxnas_scr_write_port(struct ata_port *ap, unsigned int sc_reg, - u32 val) -{ - sata_oxnas_link_write(ap, 0x20 + (sc_reg * 4), val); - return 0; -} - -static int sata_oxnas_scr_write(struct ata_link *link, unsigned int sc_reg, - u32 val) -{ - return sata_oxnas_scr_write_port(link->ap, sc_reg, val); -} - -u32 sata_oxnas_link_read(struct ata_port *ap, unsigned int link_reg) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - struct sata_oxnas_host_priv *hd = ap->host->private_data; - void __iomem *port_base = pd->port_base; - u32 result; - u32 patience; - unsigned long flags; - - spin_lock_irqsave(&hd->phy_lock, flags); - /* accessed twice as a work around for a bug in the SATA abp bridge - * hardware (bug 6828) */ - iowrite32(link_reg, port_base + LINK_RD_ADDR); - ioread32(port_base + LINK_RD_ADDR); - - for (patience = 0x100000; patience > 0; --patience) { - if (ioread32(port_base + LINK_CONTROL) & 0x00000001) - break; - } - if (patience == 0) - DPRINTK("link read timed out for port %d\n", ap->port_no); - - result = ioread32(port_base + LINK_DATA); - spin_unlock_irqrestore(&hd->phy_lock, flags); - - return result; -} - -static int sata_oxnas_scr_read_port(struct ata_port *ap, unsigned int sc_reg, - u32 *val) -{ - *val = sata_oxnas_link_read(ap, 0x20 + (sc_reg*4)); - return 0; -} - -static int sata_oxnas_scr_read(struct ata_link *link, - unsigned int sc_reg, u32 *val) -{ - return sata_oxnas_scr_read_port(link->ap, sc_reg, val); -} - -/** - * sata_oxnas_irq_clear is called during probe just before the interrupt handler is - * registered, to be sure hardware is quiet. It clears and masks interrupt bits - * in the SATA core. - * - * @param ap hardware with the registers in - */ -static void sata_oxnas_irq_clear(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *port_priv = ap->private_data; - - /* clear pending interrupts */ - iowrite32(~0, port_priv->port_base + INT_CLEAR); - iowrite32(COREINT_END, port_priv->core_base + CORE_INT_CLEAR); -} - -/** - * qc_issue is used to make a command active, once the hardware and S/G tables - * have been prepared. IDE BMDMA drivers use the helper function - * ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced - * drivers roll their own ->qc_issue implementation, using this as the - * "issue new ATA command to hardware" hook. - * @param qc the queued command to issue - */ -static unsigned int sata_oxnas_qc_issue(struct ata_queued_cmd *qc) -{ - struct sata_oxnas_port_priv *pd = qc->ap->private_data; - struct sata_oxnas_host_priv *hd = qc->ap->host->private_data; - - void __iomem *port_base = pd->port_base; - void __iomem *core_base = pd->core_base; - int port_no = qc->ap->port_no; - int no_microcode = (hd->current_ucode == UNKNOWN_MODE); - u32 reg; - - /* check the core is idle */ - if (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY) { - int count = 0; - - DPRINTK("core busy for a command on port %d\n", - qc->ap->port_no); - do { - mdelay(1); - if (++count > 100) { - DPRINTK("core busy for a command on port %d\n", - qc->ap->port_no); - /* CrazyDumpDebug(); */ - sata_oxnas_cleanup(qc->ap->host); - } - } while (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY); - } - - /* enable passing of error signals to DMA sub-core by clearing the - * appropriate bit */ - reg = ioread32(core_base + DATA_PLANE_CTRL); - if (no_microcode) - reg |= (DPC_ERROR_MASK_BIT | (DPC_ERROR_MASK_BIT << 1)); - reg &= ~(DPC_ERROR_MASK_BIT << port_no); - iowrite32(reg, core_base + DATA_PLANE_CTRL); - - /* Disable all interrupts for ports and RAID controller */ - iowrite32(~0, port_base + INT_DISABLE); - - /* Disable all interrupts for core */ - iowrite32(~0, core_base + CORE_INT_DISABLE); - wmb(); - - /* Load the command settings into the orb registers */ - sata_oxnas_tf_load(qc->ap, &qc->tf); - - /* both pio and dma commands use dma */ - if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) { - /* Start the DMA */ - iowrite32(SGDMA_CONTROL_GO, pd->sgdma_base + SGDMA_CONTROL); - wmb(); - } - - /* enable End of command interrupt */ - iowrite32(INT_WANT, port_base + INT_ENABLE); - iowrite32(COREINT_END, core_base + CORE_INT_ENABLE); - wmb(); - - /* Start the command */ - reg = ioread32(port_base + SATA_COMMAND); - reg &= ~SATA_OPCODE_MASK; - reg |= CMD_WRITE_TO_ORB_REGS; - iowrite32(reg , port_base + SATA_COMMAND); - wmb(); - - return 0; -} - -/** - * Will schedule the libATA error handler on the premise that there has - * been a hotplug event on the port specified - */ -void sata_oxnas_checkforhotplug(struct ata_port *ap) -{ - DPRINTK("ENTER\n"); - - ata_ehi_hotplugged(&ap->link.eh_info); - ata_port_freeze(ap); -} - - -/**************************************************************************/ -/* Locking */ -/**************************************************************************/ -/** - * The underlying function that controls access to the sata core - * - * @return non-zero indicates that you have acquired exclusive access to the - * sata core. - */ -static int __acquire_sata_core( - struct ata_host *ah, - int port_no, - oxnas_sata_isr_callback_t callback, - void *arg, - int may_sleep, - int timeout_jiffies, - int hw_access, - void *uid, - int locker_type) -{ - unsigned long end = jiffies + timeout_jiffies; - int acquired = 0; - unsigned long flags; - int timed_out = 0; - struct sata_oxnas_host_priv *hd; - - DEFINE_WAIT(wait); - - if (!ah) - return acquired; - - hd = ah->private_data; - - spin_lock_irqsave(&hd->core_lock, flags); - - DPRINTK("Entered uid %p, port %d, h/w count %d, d count %d, " - "callback %p, hw_access %d, core_locked %d, " - "reentrant_port_no %d, isr_callback %p\n", - uid, port_no, hd->hw_lock_count, hd->direct_lock_count, - callback, hw_access, hd->core_locked, hd->reentrant_port_no, - hd->isr_callback); - - while (!timed_out) { - if (hd->core_locked || - (!hw_access && hd->scsi_nonblocking_attempts)) { - /* Can only allow access if from SCSI/SATA stack and if - * reentrant access is allowed and this access is to the - * same port for which the lock is current held - */ - if (hw_access && (port_no == hd->reentrant_port_no)) { - BUG_ON(!hd->hw_lock_count); - ++(hd->hw_lock_count); - - DPRINTK("Allow SCSI/SATA re-entrant access to " - "uid %p port %d\n", uid, port_no); - acquired = 1; - break; - } else if (!hw_access) { - if ((locker_type == SATA_READER) && - (hd->current_locker_type == SATA_READER)) { - WARN(1, - "Already locked by reader, " - "uid %p, locker_uid %p, " - "port %d, h/w count %d, " - "d count %d, hw_access %d\n", - uid, hd->locker_uid, port_no, - hd->hw_lock_count, - hd->direct_lock_count, - hw_access); - goto check_uid; - } - - if ((locker_type != SATA_READER) && - (locker_type != SATA_WRITER)) { - goto wait_for_lock; - } - -check_uid: - WARN(uid == hd->locker_uid, "Attempt to lock " - "by locker type %d uid %p, already " - "locked by locker type %d with " - "locker_uid %p, port %d, " - "h/w count %d, d count %d, " - "hw_access %d\n", locker_type, uid, - hd->current_locker_type, - hd->locker_uid, port_no, - hd->hw_lock_count, - hd->direct_lock_count, hw_access); - } - } else { - WARN(hd->hw_lock_count || hd->direct_lock_count, - "Core unlocked but counts non-zero: uid %p, " - "locker_uid %p, port %d, h/w count %d, " - "d count %d, hw_access %d\n", uid, - hd->locker_uid, port_no, hd->hw_lock_count, - hd->direct_lock_count, hw_access); - - BUG_ON(hd->current_locker_type != SATA_UNLOCKED); - - WARN(hd->locker_uid, "Attempt to lock uid %p when " - "locker_uid %p is non-zero, port %d, " - "h/w count %d, d count %d, hw_access %d\n", - uid, hd->locker_uid, port_no, hd->hw_lock_count, - hd->direct_lock_count, hw_access); - - if (!hw_access) { - /* Direct access attempting to acquire - * non-contented lock - */ - /* Must have callback for direct access */ - BUG_ON(!callback); - /* Sanity check lock state */ - BUG_ON(hd->reentrant_port_no != -1); - - hd->isr_callback = callback; - hd->isr_arg = arg; - ++(hd->direct_lock_count); - - hd->current_locker_type = locker_type; - } else { - /* SCSI/SATA attempting to acquire - * non-contented lock - */ - /* No callbacks for SCSI/SATA access */ - BUG_ON(callback); - /* No callback args for SCSI/SATA access */ - BUG_ON(arg); - - /* Sanity check lock state */ - BUG_ON(hd->isr_callback); - BUG_ON(hd->isr_arg); - - ++(hd->hw_lock_count); - hd->reentrant_port_no = port_no; - - hd->current_locker_type = SATA_SCSI_STACK; - } - - hd->core_locked = 1; - hd->locker_uid = uid; - acquired = 1; - break; - } - -wait_for_lock: - if (!may_sleep) { - DPRINTK("Denying for uid %p locker_type %d, " - "hw_access %d, port %d, current_locker_type %d as " - "cannot sleep\n", uid, locker_type, hw_access, port_no, - hd->current_locker_type); - - if (hw_access) - ++(hd->scsi_nonblocking_attempts); - - break; - } - - /* Core is locked and we're allowed to sleep, so wait to be - * awoken when the core is unlocked - */ - for (;;) { - prepare_to_wait(hw_access ? &hd->scsi_wait_queue : - &hd->fast_wait_queue, - &wait, TASK_UNINTERRUPTIBLE); - if (!hd->core_locked && - !(!hw_access && hd->scsi_nonblocking_attempts)) { - /* We're going to use variables that will have - * been changed by the waker prior to clearing - * core_locked so we need to ensure we see - * changes to all those variables - */ - smp_rmb(); - break; - } - if (time_after(jiffies, end)) { - printk(KERN_WARNING "__acquire_sata_core() " - "uid %p failing for port %d timed out, " - "locker_uid %p, h/w count %d, " - "d count %d, callback %p, hw_access %d, " - "core_locked %d, reentrant_port_no %d, " - "isr_callback %p, isr_arg %p\n", uid, - port_no, hd->locker_uid, - hd->hw_lock_count, - hd->direct_lock_count, callback, - hw_access, hd->core_locked, - hd->reentrant_port_no, hd->isr_callback, - hd->isr_arg); - timed_out = 1; - break; - } - spin_unlock_irqrestore(&hd->core_lock, flags); - if (!schedule_timeout(4*HZ)) { - printk(KERN_INFO "__acquire_sata_core() uid %p, " - "locker_uid %p, timed-out of " - "schedule(), checking overall timeout\n", - uid, hd->locker_uid); - } - spin_lock_irqsave(&hd->core_lock, flags); - } - finish_wait(hw_access ? &hd->scsi_wait_queue : - &hd->fast_wait_queue, &wait); - } - - if (hw_access && acquired) { - if (hd->scsi_nonblocking_attempts) - hd->scsi_nonblocking_attempts = 0; - - /* Wake any other SCSI/SATA waiters so they can get reentrant - * access to the same port if appropriate. This is because if - * the SATA core is locked by fast access, or SCSI/SATA access - * to other port, then can have >1 SCSI/SATA waiters on the wait - * list so want to give reentrant accessors a chance to get - * access ASAP - */ - if (!list_empty(&hd->scsi_wait_queue.head)) - wake_up(&hd->scsi_wait_queue); - } - - DPRINTK("Leaving uid %p with acquired = %d, port %d, callback %p\n", - uid, acquired, port_no, callback); - - spin_unlock_irqrestore(&hd->core_lock, flags); - - return acquired; -} - -int sata_core_has_fast_waiters(struct ata_host *ah) -{ - int has_waiters; - unsigned long flags; - struct sata_oxnas_host_priv *hd = ah->private_data; - - spin_lock_irqsave(&hd->core_lock, flags); - has_waiters = !list_empty(&hd->fast_wait_queue.head); - spin_unlock_irqrestore(&hd->core_lock, flags); - - return has_waiters; -} -EXPORT_SYMBOL(sata_core_has_fast_waiters); - -int sata_core_has_scsi_waiters(struct ata_host *ah) -{ - int has_waiters; - unsigned long flags; - struct sata_oxnas_host_priv *hd = ah->private_data; - - spin_lock_irqsave(&hd->core_lock, flags); - has_waiters = hd->scsi_nonblocking_attempts || - !list_empty(&hd->scsi_wait_queue.head); - spin_unlock_irqrestore(&hd->core_lock, flags); - - return has_waiters; -} -EXPORT_SYMBOL(sata_core_has_scsi_waiters); - -/* - * ata_port operation to gain ownership of the SATA hardware prior to issuing - * a command against a SATA host. Allows any number of users of the port against - * which the lock was first acquired, thus enforcing that only one SATA core - * port may be operated on at once. - */ -static int sata_oxnas_acquire_hw( - struct ata_port *ap, - int may_sleep, - int timeout_jiffies) -{ - return __acquire_sata_core(ap->host, ap->port_no, NULL, 0, may_sleep, - timeout_jiffies, 1, (void *)HW_LOCKER_UID, - SATA_SCSI_STACK); -} - -/* - * operation to release ownership of the SATA hardware - */ -static void sata_oxnas_release_hw(struct ata_port *ap) -{ - unsigned long flags; - int released = 0; - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - spin_lock_irqsave(&hd->core_lock, flags); - - DPRINTK("Entered port_no = %d, h/w count %d, d count %d, " - "core locked = %d, reentrant_port_no = %d, isr_callback %p\n", - ap->port_no, hd->hw_lock_count, hd->direct_lock_count, - hd->core_locked, hd->reentrant_port_no, hd->isr_callback); - - if (!hd->core_locked) { - /* Nobody holds the SATA lock */ - printk(KERN_WARNING "Nobody holds SATA lock, port_no %d\n", - ap->port_no); - released = 1; - } else if (!hd->hw_lock_count) { - /* SCSI/SATA has released without holding the lock */ - printk(KERN_WARNING "SCSI/SATA does not hold SATA lock, " - "port_no %d\n", ap->port_no); - } else { - /* Trap incorrect usage */ - BUG_ON(hd->reentrant_port_no == -1); - BUG_ON(ap->port_no != hd->reentrant_port_no); - BUG_ON(hd->direct_lock_count); - BUG_ON(hd->current_locker_type != SATA_SCSI_STACK); - - WARN(!hd->locker_uid || (hd->locker_uid != HW_LOCKER_UID), - "Invalid locker uid %p, h/w count %d, d count %d, " - "reentrant_port_no %d, core_locked %d, " - "isr_callback %p\n", hd->locker_uid, hd->hw_lock_count, - hd->direct_lock_count, hd->reentrant_port_no, - hd->core_locked, hd->isr_callback); - - if (--(hd->hw_lock_count)) { - DPRINTK("Still nested port_no %d\n", ap->port_no); - } else { - DPRINTK("Release port_no %d\n", ap->port_no); - hd->reentrant_port_no = -1; - hd->isr_callback = NULL; - hd->current_locker_type = SATA_UNLOCKED; - hd->locker_uid = 0; - hd->core_locked = 0; - released = 1; - wake_up(!list_empty(&hd->scsi_wait_queue.head) ? - &hd->scsi_wait_queue : - &hd->fast_wait_queue); - } - } - - DPRINTK("Leaving, port_no %d, count %d\n", ap->port_no, - hd->hw_lock_count); - - spin_unlock_irqrestore(&hd->core_lock, flags); - - /* CONFIG_SATA_OX820_DIRECT_HWRAID */ - /* if (released) - ox820hwraid_restart_queue(); - } */ -} - -static inline int sata_oxnas_is_host_frozen(struct ata_host *ah) -{ - struct sata_oxnas_host_priv *hd = ah->private_data; - - smp_rmb(); - return hd->port_in_eh || hd->port_frozen; -} - - -static inline u32 sata_oxnas_hostportbusy(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - return (ioread32(hd->port_base + SATA_COMMAND) & CMD_CORE_BUSY) || - (hd->n_ports > 1 && - (ioread32(hd->port_base + PORT_SIZE + SATA_COMMAND) & - CMD_CORE_BUSY)); -} - -static inline u32 sata_oxnas_hostdmabusy(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - - return ioread32(pd->sgdma_base + SGDMA_STATUS) & SGDMA_BUSY; -} - - -/** - * Turns on the cores clock and resets it - */ -static void sata_oxnas_reset_core(struct ata_host *ah) -{ - struct sata_oxnas_host_priv *host_priv = ah->private_data; - int n; - - DPRINTK("ENTER\n"); - clk_prepare_enable(host_priv->clk); - - reset_control_assert(host_priv->rst_sata); - reset_control_assert(host_priv->rst_link); - reset_control_assert(host_priv->rst_phy); - - udelay(50); - - /* un-reset the PHY, then Link and Controller */ - reset_control_deassert(host_priv->rst_phy); - udelay(50); - - reset_control_deassert(host_priv->rst_sata); - reset_control_deassert(host_priv->rst_link); - udelay(50); - - workaround5458(ah); - /* tune for sata compatibility */ - sata_oxnas_link_write(ah->ports[0], 0x60, 0x2988); - - for (n = 0; n < host_priv->n_ports; n++) { - /* each port in turn */ - sata_oxnas_link_write(ah->ports[n], 0x70, 0x55629); - } - udelay(50); -} - - -/** - * Called after an identify device command has worked out what kind of device - * is on the port - * - * @param port The port to configure - * @param pdev The hardware associated with controlling the port - */ -static void sata_oxnas_dev_config(struct ata_device *pdev) -{ - struct sata_oxnas_port_priv *pd = pdev->link->ap->private_data; - void __iomem *port_base = pd->port_base; - u32 reg; - - DPRINTK("ENTER\n"); - /* Set the bits to put the port into 28 or 48-bit node */ - reg = ioread32(port_base + DRIVE_CONTROL); - reg &= ~3; - reg |= (pdev->flags & ATA_DFLAG_LBA48) ? DR_CON_48 : DR_CON_28; - iowrite32(reg, port_base + DRIVE_CONTROL); - - /* if this is an ATA-6 disk, put port into ATA-5 auto translate mode */ - if (pdev->flags & ATA_DFLAG_LBA48) { - reg = ioread32(port_base + PORT_CONTROL); - reg |= 2; - iowrite32(reg, port_base + PORT_CONTROL); - } -} -/** - * called to write a taskfile into the ORB registers - * @param ap hardware with the registers in - * @param tf taskfile to write to the registers - */ -static void sata_oxnas_tf_load(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - u32 count = 0; - u32 Orb1 = 0; - u32 Orb2 = 0; - u32 Orb3 = 0; - u32 Orb4 = 0; - u32 Command_Reg; - - struct sata_oxnas_port_priv *port_priv = ap->private_data; - void __iomem *port_base = port_priv->port_base; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - /* wait a maximum of 10ms for the core to be idle */ - do { - Command_Reg = ioread32(port_base + SATA_COMMAND); - if (!(Command_Reg & CMD_CORE_BUSY)) - break; - count++; - udelay(50); - } while (count < 200); - - /* check if the ctl register has interrupts disabled or enabled and - * modify the interrupt enable registers on the ata core as required */ - if (tf->ctl & ATA_NIEN) { - /* interrupts disabled */ - u32 mask = (COREINT_END << ap->port_no); - - iowrite32(mask, port_priv->core_base + CORE_INT_DISABLE); - sata_oxnas_irq_clear(ap); - } else { - sata_oxnas_irq_on(ap); - } - - Orb2 |= (tf->command) << 24; - - /* write 48 or 28 bit tf parameters */ - if (is_addr) { - /* set LBA bit as it's an address */ - Orb1 |= (tf->device & ATA_LBA) << 24; - - if (tf->flags & ATA_TFLAG_LBA48) { - Orb1 |= ATA_LBA << 24; - Orb2 |= (tf->hob_nsect) << 8; - Orb3 |= (tf->hob_lbal) << 24; - Orb4 |= (tf->hob_lbam) << 0; - Orb4 |= (tf->hob_lbah) << 8; - Orb4 |= (tf->hob_feature) << 16; - } else { - Orb3 |= (tf->device & 0xf) << 24; - } - - /* write 28-bit lba */ - Orb2 |= (tf->nsect) << 0; - Orb2 |= (tf->feature) << 16; - Orb3 |= (tf->lbal) << 0; - Orb3 |= (tf->lbam) << 8; - Orb3 |= (tf->lbah) << 16; - Orb4 |= (tf->ctl) << 24; - } - - if (tf->flags & ATA_TFLAG_DEVICE) - Orb1 |= (tf->device) << 24; - - ap->last_ctl = tf->ctl; - - /* write values to registers */ - iowrite32(Orb1, port_base + ORB1); - iowrite32(Orb2, port_base + ORB2); - iowrite32(Orb3, port_base + ORB3); - iowrite32(Orb4, port_base + ORB4); -} - - -void sata_oxnas_set_mode(struct ata_host *ah, u32 mode, u32 force) -{ - struct sata_oxnas_host_priv *host_priv = ah->private_data; - void __iomem *core_base = host_priv->core_base; - - unsigned int *src; - void __iomem *dst; - unsigned int progmicrocode = 0; - unsigned int changeparameters = 0; - - u32 previous_mode; - - /* these micro-code programs _should_ include the version word */ - - /* JBOD */ - static const unsigned int jbod[] = { - 0x07B400AC, 0x0228A280, 0x00200001, 0x00204002, 0x00224001, - 0x00EE0009, 0x00724901, 0x01A24903, 0x00E40009, 0x00224001, - 0x00621120, 0x0183C908, 0x00E20005, 0x00718908, 0x0198A206, - 0x00621124, 0x0183C908, 0x00E20046, 0x00621104, 0x0183C908, - 0x00E20015, 0x00EE009D, 0x01A3E301, 0x00E2001B, 0x0183C900, - 0x00E2001B, 0x00210001, 0x00EE0020, 0x01A3E302, 0x00E2009D, - 0x0183C901, 0x00E2009D, 0x00210002, 0x0235D700, 0x0208A204, - 0x0071C908, 0x000F8207, 0x000FC207, 0x0071C920, 0x000F8507, - 0x000FC507, 0x0228A240, 0x02269A40, 0x00094004, 0x00621104, - 0x0180C908, 0x00E40031, 0x00621112, 0x01A3C801, 0x00E2002B, - 0x00294000, 0x0228A220, 0x01A69ABF, 0x002F8000, 0x002FC000, - 0x0198A204, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007, - 0x0183C903, 0x00E2009D, 0x0228A220, 0x0071890C, 0x0208A206, - 0x0198A206, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007, - 0x00EE009D, 0x00621104, 0x0183C908, 0x00E2004A, 0x00EE009D, - 0x01A3C901, 0x00E20050, 0x0021E7FF, 0x0183E007, 0x00E2009D, - 0x00EE0054, 0x0061600B, 0x0021E7FF, 0x0183C507, 0x00E2009D, - 0x01A3E301, 0x00E2005A, 0x0183C900, 0x00E2005A, 0x00210001, - 0x00EE005F, 0x01A3E302, 0x00E20005, 0x0183C901, 0x00E20005, - 0x00210002, 0x0235D700, 0x0208A204, 0x000F8109, 0x000FC109, - 0x0071C918, 0x000F8407, 0x000FC407, 0x0001C022, 0x01A1A2BF, - 0x0001C106, 0x00088007, 0x02269A40, 0x00094004, 0x00621112, - 0x01A3C801, 0x00E4007F, 0x00621104, 0x0180C908, 0x00E4008D, - 0x00621128, 0x0183C908, 0x00E2006C, 0x01A3C901, 0x00E2007B, - 0x0021E7FF, 0x0183E007, 0x00E2007F, 0x00EE006C, 0x0061600B, - 0x0021E7FF, 0x0183C507, 0x00E4006C, 0x00621111, 0x01A3C801, - 0x00E2007F, 0x00621110, 0x01A3C801, 0x00E20082, 0x0228A220, - 0x00621119, 0x01A3C801, 0x00E20086, 0x0001C022, 0x01B1A220, - 0x0001C106, 0x00088007, 0x0198A204, 0x00294000, 0x01A69ABF, - 0x002F8000, 0x002FC000, 0x0183C903, 0x00E20005, 0x0228A220, - 0x0071890C, 0x0208A206, 0x0198A206, 0x0001C022, 0x01B1A220, - 0x0001C106, 0x00088007, 0x00EE009D, 0x00621128, 0x0183C908, - 0x00E20005, 0x00621104, 0x0183C908, 0x00E200A6, 0x0062111C, - 0x0183C908, 0x00E20005, 0x0071890C, 0x0208A206, 0x0198A206, - 0x00718908, 0x0208A206, 0x00EE0005, ~0 - }; - - /* Bi-Modal RAID-0/1 */ - static const unsigned int raid[] = { - 0x00F20145, 0x00EE20FA, 0x00EE20A7, 0x0001C009, 0x00EE0004, - 0x00220000, 0x0001000B, 0x037003FF, 0x00700018, 0x037003FE, - 0x037043FD, 0x00704118, 0x037043FC, 0x01A3D240, 0x00E20017, - 0x00B3C235, 0x00E40018, 0x0093C104, 0x00E80014, 0x0093C004, - 0x00E80017, 0x01020000, 0x00274020, 0x00EE0083, 0x0080C904, - 0x0093C104, 0x00EA0020, 0x0093C103, 0x00EC001F, 0x00220002, - 0x00924104, 0x0005C009, 0x00EE0058, 0x0093CF04, 0x00E80026, - 0x00900F01, 0x00600001, 0x00910400, 0x00EE0058, 0x00601604, - 0x01A00003, 0x00E2002C, 0x01018000, 0x00274040, 0x00EE0083, - 0x0093CF03, 0x00EC0031, 0x00220003, 0x00924F04, 0x0005C009, - 0x00810104, 0x00B3C235, 0x00E20037, 0x0022C000, 0x00218210, - 0x00EE0039, 0x0022C001, 0x00218200, 0x00600401, 0x00A04901, - 0x00604101, 0x01A0C401, 0x00E20040, 0x00216202, 0x00EE0041, - 0x00216101, 0x02018506, 0x00EE2141, 0x00904901, 0x00E20049, - 0x00A00401, 0x00600001, 0x02E0C301, 0x00EE2141, 0x00216303, - 0x037003EE, 0x01A3C001, 0x00E40105, 0x00250080, 0x00204000, - 0x002042F1, 0x0004C001, 0x00230001, 0x00100006, 0x02C18605, - 0x00100006, 0x01A3D502, 0x00E20055, 0x00EE0053, 0x00004009, - 0x00000004, 0x00B3C235, 0x00E40062, 0x0022C001, 0x0020C000, - 0x00EE2141, 0x0020C001, 0x00EE2141, 0x00EE006B, 0x0022C000, - 0x0060D207, 0x00EE2141, 0x00B3C242, 0x00E20069, 0x01A3D601, - 0x00E2006E, 0x02E0C301, 0x00EE2141, 0x00230001, 0x00301303, - 0x00EE007B, 0x00218210, 0x01A3C301, 0x00E20073, 0x00216202, - 0x00EE0074, 0x00216101, 0x02018506, 0x00214000, 0x037003EE, - 0x01A3C001, 0x00E40108, 0x00230001, 0x00100006, 0x00250080, - 0x00204000, 0x002042F1, 0x0004C001, 0x00EE007F, 0x0024C000, - 0x01A3D1F0, 0x00E20088, 0x00230001, 0x00300000, 0x01A3D202, - 0x00E20085, 0x00EE00A5, 0x00B3C800, 0x00E20096, 0x00218000, - 0x00924709, 0x0005C009, 0x00B20802, 0x00E40093, 0x037103FD, - 0x00710418, 0x037103FC, 0x00EE0006, 0x00220000, 0x0001000F, - 0x00EE0006, 0x00800B0C, 0x00B00001, 0x00204000, 0x00208550, - 0x00208440, 0x002083E0, 0x00208200, 0x00208100, 0x01008000, - 0x037083EE, 0x02008212, 0x02008216, 0x01A3C201, 0x00E400A5, - 0x0100C000, 0x00EE20FA, 0x02800000, 0x00208000, 0x00B24C00, - 0x00E400AD, 0x00224001, 0x00724910, 0x0005C009, 0x00B3CDC4, - 0x00E200D5, 0x00B3CD29, 0x00E200D5, 0x00B3CD20, 0x00E200D5, - 0x00B3CD24, 0x00E200D5, 0x00B3CDC5, 0x00E200D2, 0x00B3CD39, - 0x00E200D2, 0x00B3CD30, 0x00E200D2, 0x00B3CD34, 0x00E200D2, - 0x00B3CDCA, 0x00E200CF, 0x00B3CD35, 0x00E200CF, 0x00B3CDC8, - 0x00E200CC, 0x00B3CD25, 0x00E200CC, 0x00B3CD40, 0x00E200CB, - 0x00B3CD42, 0x00E200CB, 0x01018000, 0x00EE0083, 0x0025C000, - 0x036083EE, 0x0000800D, 0x00EE00D8, 0x036083EE, 0x00208035, - 0x00EE00DA, 0x036083EE, 0x00208035, 0x00EE00DA, 0x00208007, - 0x036083EE, 0x00208025, 0x036083EF, 0x02400000, 0x01A3D208, - 0x00E200D8, 0x0067120A, 0x0021C000, 0x0021C224, 0x00220000, - 0x00404B1C, 0x00600105, 0x00800007, 0x0020C00E, 0x00214000, - 0x01004000, 0x01A0411F, 0x00404E01, 0x01A3C101, 0x00E200F1, - 0x00B20800, 0x00E400D8, 0x00220001, 0x0080490B, 0x00B04101, - 0x0040411C, 0x00EE00E1, 0x02269A01, 0x01020000, 0x02275D80, - 0x01A3D202, 0x00E200F4, 0x01B75D80, 0x01030000, 0x01B69A01, - 0x00EE00D8, 0x01A3D204, 0x00E40104, 0x00224000, 0x0020C00E, - 0x0020001E, 0x00214000, 0x01004000, 0x0212490E, 0x00214001, - 0x01004000, 0x02400000, 0x00B3D702, 0x00E80112, 0x00EE010E, - 0x00B3D702, 0x00E80112, 0x00B3D702, 0x00E4010E, 0x00230001, - 0x00EE0140, 0x00200005, 0x036003EE, 0x00204001, 0x00EE0116, - 0x00230001, 0x00100006, 0x02C18605, 0x00100006, 0x01A3D1F0, - 0x00E40083, 0x037003EE, 0x01A3C002, 0x00E20121, 0x0020A300, - 0x0183D102, 0x00E20124, 0x037003EE, 0x01A00005, 0x036003EE, - 0x01A0910F, 0x00B3C20F, 0x00E2012F, 0x01A3D502, 0x00E20116, - 0x01A3C002, 0x00E20116, 0x00B3D702, 0x00E4012C, 0x00300000, - 0x00EE011F, 0x02C18605, 0x00100006, 0x00EE0116, 0x01A3D1F0, - 0x00E40083, 0x037003EE, 0x01A3C004, 0x00E20088, 0x00200003, - 0x036003EE, 0x01A3D502, 0x00E20136, 0x00230001, 0x00B3C101, - 0x00E4012C, 0x00100006, 0x02C18605, 0x00100006, 0x00204000, - 0x00EE0116, 0x00100006, 0x01A3D1F0, 0x00E40083, 0x01000000, - 0x02400000, ~0 - }; - - DPRINTK("ENTER: mode:%d, force:%d\n", mode, force); - - if (force) - previous_mode = UNKNOWN_MODE; - else - previous_mode = host_priv->current_ucode; - - if (mode == previous_mode) - return; - - host_priv->current_ucode = mode; - - /* decide what needs to be done using the STD in my logbook */ - switch (previous_mode) { - case OXNASSATA_RAID1: - switch (mode) { - case OXNASSATA_RAID0: - changeparameters = 1; - break; - case OXNASSATA_NOTRAID: - changeparameters = 1; - progmicrocode = 1; - break; - } - break; - case OXNASSATA_RAID0: - switch (mode) { - case OXNASSATA_RAID1: - changeparameters = 1; - break; - case OXNASSATA_NOTRAID: - changeparameters = 1; - progmicrocode = 1; - break; - } - break; - case OXNASSATA_NOTRAID: - switch (mode) { - case OXNASSATA_RAID0: - case OXNASSATA_RAID1: - changeparameters = 1; - progmicrocode = 1; - break; - } - break; - case UNKNOWN_MODE: - changeparameters = 1; - progmicrocode = 1; - break; - } - - /* no need to reprogram everything if already in the right mode */ - if (progmicrocode) { - /* reset micro-code processor */ - iowrite32(1, core_base + PROC_RESET); - wmb(); - - /* select micro-code */ - switch (mode) { - case OXNASSATA_RAID1: - case OXNASSATA_RAID0: - VPRINTK("Loading RAID micro-code\n"); - src = (unsigned int *)&raid[1]; - break; - case OXNASSATA_NOTRAID: - VPRINTK("Loading JBOD micro-code\n"); - src = (unsigned int *)&jbod[1]; - break; - default: - BUG(); - break; - } - - /* load micro code */ - dst = core_base + UCODE_STORE; - while (*src != ~0) { - iowrite32(*src, dst); - src++; - dst += sizeof(*src); - } - wmb(); - } - - if (changeparameters) { - u32 reg; - /* set other mode dependent flags */ - switch (mode) { - case OXNASSATA_RAID1: - /* clear JBOD mode */ - reg = ioread32(core_base + DATA_PLANE_CTRL); - reg |= DPC_JBOD_UCODE; - reg &= ~DPC_FIS_SWCH; - iowrite32(reg, core_base + DATA_PLANE_CTRL); - wmb(); - - /* set the hardware up for RAID-1 */ - iowrite32(0, core_base + RAID_WP_BOT_LOW); - iowrite32(0, core_base + RAID_WP_BOT_HIGH); - iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW); - iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH); - iowrite32(0, core_base + RAID_SIZE_LOW); - iowrite32(0, core_base + RAID_SIZE_HIGH); - wmb(); - break; - case OXNASSATA_RAID0: - /* clear JBOD mode */ - reg = ioread32(core_base + DATA_PLANE_CTRL); - reg |= DPC_JBOD_UCODE; - reg &= ~DPC_FIS_SWCH; - iowrite32(reg, core_base + DATA_PLANE_CTRL); - wmb(); - - /* set the hardware up for RAID-1 */ - iowrite32(0, core_base + RAID_WP_BOT_LOW); - iowrite32(0, core_base + RAID_WP_BOT_HIGH); - iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW); - iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH); - iowrite32(0xffffffff, core_base + RAID_SIZE_LOW); - iowrite32(0x7fffffff, core_base + RAID_SIZE_HIGH); - wmb(); - break; - case OXNASSATA_NOTRAID: - /* enable jbod mode */ - reg = ioread32(core_base + DATA_PLANE_CTRL); - reg &= ~DPC_JBOD_UCODE; - reg &= ~DPC_FIS_SWCH; - iowrite32(reg, core_base + DATA_PLANE_CTRL); - wmb(); - - /* start micro-code processor*/ - iowrite32(1, core_base + PROC_START); - break; - default: - reg = ioread32(core_base + DATA_PLANE_CTRL); - reg |= DPC_JBOD_UCODE; - reg &= ~DPC_FIS_SWCH; - iowrite32(reg, core_base + DATA_PLANE_CTRL); - wmb(); - break; - } - } -} - -/** - * sends a sync-escape if there is a link present - */ -static inline void sata_oxnas_send_sync_escape(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - u32 reg; - - /* read the SSTATUS register and only send a sync escape if there is a - * link active */ - if ((sata_oxnas_link_read(ap, 0x20) & 3) == 3) { - reg = ioread32(pd->port_base + SATA_COMMAND); - reg &= ~SATA_OPCODE_MASK; - reg |= CMD_SYNC_ESCAPE; - iowrite32(reg, pd->port_base + SATA_COMMAND); - } -} - -/* clears errors */ -static inline void sata_oxnas_clear_CS_error(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - u32 *base = pd->port_base; - u32 reg; - - reg = ioread32(base + SATA_CONTROL); - reg &= SATA_CTL_ERR_MASK; - iowrite32(reg, base + SATA_CONTROL); -} - -static inline void sata_oxnas_reset_sgdma(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - - iowrite32(SGDMA_RESETS_CTRL, pd->sgdma_base + SGDMA_RESETS); -} - -static inline void sata_oxnas_reset_dma(struct ata_port *ap, int assert) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - u32 reg; - - reg = ioread32(pd->dmactl_base + DMA_CONTROL); - if (assert) - reg |= DMA_CONTROL_RESET; - else - reg &= ~DMA_CONTROL_RESET; - - iowrite32(reg, pd->dmactl_base + DMA_CONTROL); -}; - -/** - * Clears the error caused by the core's registers being accessed when the - * core is busy. - */ -static inline void sata_oxnas_clear_reg_access_error(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - u32 *base = pd->port_base; - u32 reg; - - reg = ioread32(base + INT_STATUS); - - DPRINTK("ENTER\n"); - if (reg & INT_REG_ACCESS_ERR) { - DPRINTK("clearing register access error on port %d\n", - ap->port_no); - iowrite32(INT_REG_ACCESS_ERR, base + INT_STATUS); - } - reg = ioread32(base + INT_STATUS); - if (reg & INT_REG_ACCESS_ERR) - DPRINTK("register access error didn't clear\n"); -} - -static inline void sata_oxnas_clear_sctl_error(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - u32 *base = pd->port_base; - u32 reg; - - reg = ioread32(base + SATA_CONTROL); - reg |= SCTL_CLR_ERR; - iowrite32(reg, base + SATA_CONTROL); -} - -static inline void sata_oxnas_clear_raid_error(struct ata_host *ah) -{ - return; -}; - -/** - * Clean up all the state machines in the sata core. - * @return post cleanup action required - */ -static int sata_oxnas_cleanup(struct ata_host *ah) -{ - struct sata_oxnas_host_priv *hd = ah->private_data; - int actions_required = 0; - int n; - - printk(KERN_INFO "sata_oxnas: resetting SATA core\n"); - /* core not recovering, reset it */ - mdelay(5); - sata_oxnas_reset_core(ah); - mdelay(5); - actions_required |= OXNAS_SATA_REINIT; - /* Perform any SATA core re-initialisation after reset post reset init - * needs to be called for both ports as there's one reset for both - * ports */ - for (n = 0; n < hd->n_ports; n++) - sata_oxnas_post_reset_init(ah->ports[n]); - - - return actions_required; -} - -/** - * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @return non zero will refuse a new command, zero will may grant on subject - * to conditions elsewhere. - * - */ -static int sata_oxnas_qc_new(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - DPRINTK("port %d\n", ap->port_no); - smp_rmb(); - if (hd->port_frozen || hd->port_in_eh) - return 1; - else - return !sata_oxnas_acquire_hw(ap, 0, 0); -} - -/** - * releases the lock on the port the command used - */ -static void sata_oxnas_qc_free(struct ata_queued_cmd *qc) -{ - DPRINTK("\n"); - sata_oxnas_release_hw(qc->ap); -} - -static void sata_oxnas_freeze(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - DPRINTK("\n"); - hd->port_frozen |= BIT(ap->port_no); - smp_wmb(); -} - -static void sata_oxnas_thaw(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - DPRINTK("\n"); - hd->port_frozen &= ~BIT(ap->port_no); - smp_wmb(); -} - -void sata_oxnas_freeze_host(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - DPRINTK("ENTER\n"); - hd->port_in_eh |= BIT(ap->port_no); - smp_wmb(); -} - -void sata_oxnas_thaw_host(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - DPRINTK("ENTER\n"); - hd->port_in_eh &= ~BIT(ap->port_no); - smp_wmb(); -} - -static void sata_oxnas_post_internal_cmd(struct ata_queued_cmd *qc) -{ - DPRINTK("ENTER\n"); - /* If the core is busy here, make it idle */ - if (qc->flags & ATA_QCFLAG_FAILED) - sata_oxnas_cleanup(qc->ap->host); -} - - -/** - * turn on the interrupts - * - * @param ap Hardware with the registers in - */ -static void sata_oxnas_irq_on(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - u32 mask = (COREINT_END << ap->port_no); - - /* Clear pending interrupts */ - iowrite32(~0, pd->port_base + INT_CLEAR); - iowrite32(mask, pd->core_base + CORE_INT_STATUS); - wmb(); - - /* enable End of command interrupt */ - iowrite32(INT_WANT, pd->port_base + INT_ENABLE); - iowrite32(mask, pd->core_base + CORE_INT_ENABLE); -} - - -/** @return true if the port has a cable connected */ -int sata_oxnas_check_link(struct ata_port *ap) -{ - int reg; - - sata_oxnas_scr_read_port(ap, SCR_STATUS, ®); - /* Check for the cable present indicated by SCR status bit-0 set */ - return reg & 0x1; -} - -/** - * ata_std_postreset - standard postreset callback - * @link: the target ata_link - * @classes: classes of attached devices - * - * This function is invoked after a successful reset. Note that - * the device might have been reset more than once using - * different reset methods before postreset is invoked. - * - * LOCKING: - * Kernel thread context (may sleep) - */ -static void sata_oxnas_postreset(struct ata_link *link, unsigned int *classes) -{ - struct ata_port *ap = link->ap; - struct sata_oxnas_host_priv *hd = ap->host->private_data; - - unsigned int dev; - - DPRINTK("ENTER\n"); - ata_std_postreset(link, classes); - - /* turn on phy error detection by removing the masks */ - sata_oxnas_link_write(ap->host->ports[0], 0x0c, 0x30003); - if (hd->n_ports > 1) - sata_oxnas_link_write(ap->host->ports[1], 0x0c, 0x30003); - - /* bail out if no device is present */ - if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { - DPRINTK("EXIT, no device\n"); - return; - } - - /* go through all the devices and configure them */ - for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) { - if (ap->link.device[dev].class == ATA_DEV_ATA) - sata_oxnas_dev_config(&(ap->link.device[dev])); - } - - DPRINTK("EXIT\n"); -} - -/** - * Called to read the hardware registers / DMA buffers, to - * obtain the current set of taskfile register values. - * @param ap hardware with the registers in - * @param tf taskfile to read the registers into - */ -static void sata_oxnas_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct sata_oxnas_port_priv *port_priv = ap->private_data; - void __iomem *port_base = port_priv->port_base; - /* read the orb registers */ - u32 Orb1 = ioread32(port_base + ORB1); - u32 Orb2 = ioread32(port_base + ORB2); - u32 Orb3 = ioread32(port_base + ORB3); - u32 Orb4 = ioread32(port_base + ORB4); - - /* read common 28/48 bit tf parameters */ - tf->device = (Orb1 >> 24); - tf->nsect = (Orb2 >> 0); - tf->feature = (Orb2 >> 16); - tf->command = sata_oxnas_check_status(ap); - - /* read 48 or 28 bit tf parameters */ - if (tf->flags & ATA_TFLAG_LBA48) { - tf->hob_nsect = (Orb2 >> 8); - tf->lbal = (Orb3 >> 0); - tf->lbam = (Orb3 >> 8); - tf->lbah = (Orb3 >> 16); - tf->hob_lbal = (Orb3 >> 24); - tf->hob_lbam = (Orb4 >> 0); - tf->hob_lbah = (Orb4 >> 8); - /* feature ext and control are write only */ - } else { - /* read 28-bit lba */ - tf->lbal = (Orb3 >> 0); - tf->lbam = (Orb3 >> 8); - tf->lbah = (Orb3 >> 16); - } -} - -/** - * Read a result task-file from the sata core registers. - */ -static bool sata_oxnas_qc_fill_rtf(struct ata_queued_cmd *qc) -{ - /* Read the most recently received FIS from the SATA core ORB registers - and convert to an ATA taskfile */ - sata_oxnas_tf_read(qc->ap, &qc->result_tf); - return true; -} - -/** - * Reads the Status ATA shadow register from hardware. - * - * @return The status register - */ -static u8 sata_oxnas_check_status(struct ata_port *ap) -{ - u32 Reg; - u8 status; - struct sata_oxnas_port_priv *port_priv = ap->private_data; - void __iomem *port_base = port_priv->port_base; - - /* read byte 3 of Orb2 register */ - status = ioread32(port_base + ORB2) >> 24; - - /* check for the drive going missing indicated by SCR status bits - * 0-3 = 0 */ - sata_oxnas_scr_read_port(ap, SCR_STATUS, &Reg); - - if (!(Reg & 0x1)) { - status |= ATA_DF; - status |= ATA_ERR; - } - - return status; -} - -static inline void sata_oxnas_reset_ucode(struct ata_host *ah, int force, - int no_microcode) -{ - struct sata_oxnas_host_priv *hd = ah->private_data; - - DPRINTK("ENTER\n"); - if (no_microcode) { - u32 reg; - - sata_oxnas_set_mode(ah, UNKNOWN_MODE, force); - reg = ioread32(hd->core_base + DEVICE_CONTROL); - reg |= DEVICE_CONTROL_ATA_ERR_OVERRIDE; - iowrite32(reg, hd->core_base + DEVICE_CONTROL); - } else { - /* JBOD uCode */ - sata_oxnas_set_mode(ah, OXNASSATA_NOTRAID, force); - /* Turn the work around off as it may have been left on by any - * HW-RAID code that we've been working with */ - iowrite32(0x0, hd->core_base + PORT_ERROR_MASK); - } -} - -/** - * Prepare as much as possible for a command without involving anything that is - * shared between ports. - */ -static enum ata_completion_errors sata_oxnas_qc_prep(struct ata_queued_cmd *qc) -{ - struct sata_oxnas_port_priv *pd; - int port_no = qc->ap->port_no; - - /* if the port's not connected, complete now with an error */ - if (!sata_oxnas_check_link(qc->ap)) { - ata_port_err(qc->ap, - "port %d not connected completing with error\n", - port_no); - qc->err_mask |= AC_ERR_ATA_BUS; - ata_qc_complete(qc); - } - - sata_oxnas_reset_ucode(qc->ap->host, 0, 0); - - /* both pio and dma commands use dma */ - if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) { - - /* program the scatterlist into the prd table */ - ata_bmdma_qc_prep(qc); - - /* point the sgdma controller at the dma request structure */ - pd = qc->ap->private_data; - - iowrite32(pd->sgdma_request_pa, - pd->sgdma_base + SGDMA_REQUESTPTR); - - /* setup the request table */ - if (port_no == 0) { - pd->sgdma_request->control = - (qc->dma_dir == DMA_FROM_DEVICE) ? - SGDMA_REQCTL0IN : SGDMA_REQCTL0OUT; - } else { - pd->sgdma_request->control = - (qc->dma_dir == DMA_FROM_DEVICE) ? - SGDMA_REQCTL1IN : SGDMA_REQCTL1OUT; - } - pd->sgdma_request->qualifier = SGDMA_REQQUAL; - pd->sgdma_request->src_pa = qc->ap->bmdma_prd_dma; - pd->sgdma_request->dst_pa = qc->ap->bmdma_prd_dma; - smp_wmb(); - - /* tell it to wait */ - iowrite32(SGDMA_CONTROL_NOGO, pd->sgdma_base + SGDMA_CONTROL); - } - - return AC_ERR_OK; -} - -static int sata_oxnas_port_start(struct ata_port *ap) -{ - struct sata_oxnas_host_priv *host_priv = ap->host->private_data; - struct device *dev = ap->host->dev; - struct sata_oxnas_port_priv *pp; - void *mem; - dma_addr_t mem_dma; - - DPRINTK("ENTER\n"); - - pp = kzalloc(sizeof(*pp), GFP_KERNEL); - if (!pp) - return -ENOMEM; - - pp->port_base = host_priv->port_base + - (ap->port_no ? PORT_SIZE : 0); - pp->dmactl_base = host_priv->dmactl_base + - (ap->port_no ? DMA_CORESIZE : 0); - pp->sgdma_base = host_priv->sgdma_base + - (ap->port_no ? SGDMA_CORESIZE : 0); - pp->core_base = host_priv->core_base; - - /* preallocated */ - if (host_priv->dma_size >= SATA_OXNAS_DMA_SIZE * host_priv->n_ports) { - DPRINTK("using preallocated DMA\n"); - mem_dma = host_priv->dma_base + - (ap->port_no ? SATA_OXNAS_DMA_SIZE : 0); - mem = ioremap(mem_dma, SATA_OXNAS_DMA_SIZE); - } else { - mem = dma_alloc_coherent(dev, SATA_OXNAS_DMA_SIZE, &mem_dma, - GFP_KERNEL); - } - if (!mem) - goto err_ret; - - pp->sgdma_request_pa = mem_dma; - pp->sgdma_request = mem; - - ap->bmdma_prd_dma = mem_dma + sizeof(struct sgdma_request); - ap->bmdma_prd = mem + sizeof(struct sgdma_request); - - ap->private_data = pp; - - sata_oxnas_post_reset_init(ap); - - return 0; - -err_ret: - kfree(pp); - return -ENOMEM; - -} - -static void sata_oxnas_port_stop(struct ata_port *ap) -{ - struct device *dev = ap->host->dev; - struct sata_oxnas_port_priv *pp = ap->private_data; - struct sata_oxnas_host_priv *host_priv = ap->host->private_data; - - DPRINTK("ENTER\n"); - ap->private_data = NULL; - if (host_priv->dma_size) { - iounmap(pp->sgdma_request); - } else { - dma_free_coherent(dev, SATA_OXNAS_DMA_SIZE, - pp->sgdma_request, pp->sgdma_request_pa); - } - - kfree(pp); -} - - -static void sata_oxnas_post_reset_init(struct ata_port *ap) -{ - uint dev; - - /* force to load u-code only once after reset */ - sata_oxnas_reset_ucode(ap->host, !ap->port_no, 0); - - /* turn on phy error detection by removing the masks */ - sata_oxnas_link_write(ap, 0x0C, 0x30003); - - /* enable hotplug event detection */ - sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0); - sata_oxnas_scr_write_port(ap, SERROR_IRQ_MASK, 0x03feffff); - sata_oxnas_scr_write_port(ap, SCR_ACTIVE, ~0 & ~(1 << 26) & ~(1 << 16)); - - /* enable interrupts for ports */ - sata_oxnas_irq_on(ap); - - /* go through all the devices and configure them */ - for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) { - if (ap->link.device[dev].class == ATA_DEV_ATA) { - sata_std_hardreset(&ap->link, NULL, jiffies + HZ); - sata_oxnas_dev_config(&(ap->link.device[dev])); - } - } - - /* clean up any remaining errors */ - sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0); - VPRINTK("done\n"); -} - -/** - * host_stop() is called when the rmmod or hot unplug process begins. The - * hook must stop all hardware interrupts, DMA engines, etc. - * - * @param ap hardware with the registers in - */ -static void sata_oxnas_host_stop(struct ata_host *host_set) -{ - DPRINTK("\n"); -} - - -#define ERROR_HW_ACQUIRE_TIMEOUT_JIFFIES (10 * HZ) -static void sata_oxnas_error_handler(struct ata_port *ap) -{ - DPRINTK("Enter port_no %d\n", ap->port_no); - sata_oxnas_freeze_host(ap); - - /* If the core is busy here, make it idle */ - sata_oxnas_cleanup(ap->host); - - ata_std_error_handler(ap); - - sata_oxnas_thaw_host(ap); -} - -static int sata_oxnas_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct sata_oxnas_port_priv *pd = ap->private_data; - void __iomem *port_base = pd->port_base; - int rc; - - struct ata_taskfile tf; - u32 Command_Reg; - - DPRINTK("ENTER\n"); - - port_base = pd->port_base; - - if (ata_link_offline(link)) { - DPRINTK("PHY reports no device\n"); - *class = ATA_DEV_NONE; - goto out; - } - - /* write value to register */ - iowrite32(0, port_base + ORB1); - iowrite32(0, port_base + ORB2); - iowrite32(0, port_base + ORB3); - iowrite32((ap->ctl) << 24, port_base + ORB4); - - /* command the core to send a control FIS */ - Command_Reg = ioread32(port_base + SATA_COMMAND); - Command_Reg &= ~SATA_OPCODE_MASK; - Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; - iowrite32(Command_Reg, port_base + SATA_COMMAND); - udelay(20); /* FIXME: flush */ - - /* write value to register */ - iowrite32((ap->ctl | ATA_SRST) << 24, port_base + ORB4); - - /* command the core to send a control FIS */ - Command_Reg &= ~SATA_OPCODE_MASK; - Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; - iowrite32(Command_Reg, port_base + SATA_COMMAND); - udelay(20); /* FIXME: flush */ - - /* write value to register */ - iowrite32((ap->ctl) << 24, port_base + ORB4); - - /* command the core to send a control FIS */ - Command_Reg &= ~SATA_OPCODE_MASK; - Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; - iowrite32(Command_Reg, port_base + SATA_COMMAND); - - msleep(150); - - rc = ata_sff_wait_ready(link, deadline); - - /* if link is occupied, -ENODEV too is an error */ - if (rc && (rc != -ENODEV || sata_scr_valid(link))) { - ata_link_err(link, "SRST failed (errno=%d)\n", rc); - return rc; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - sata_oxnas_tf_read(ap, &tf); - *class = ata_dev_classify(&tf); - - if (*class == ATA_DEV_UNKNOWN) - *class = ATA_DEV_NONE; - -out: - DPRINTK("EXIT, class=%u\n", *class); - return 0; -} - - -int sata_oxnas_init_controller(struct ata_host *host) -{ - return 0; -} - -/** - * Ref bug-6320 - * - * This code is a work around for a DMA hardware bug that will repeat the - * penultimate 8-bytes on some reads. This code will check that the amount - * of data transferred is a multiple of 512 bytes, if not the in it will - * fetch the correct data from a buffer in the SATA core and copy it into - * memory. - * - * @param port SATA port to check and if necessary, correct. - */ -static int sata_oxnas_bug_6320_detect(struct ata_port *ap) -{ - struct sata_oxnas_port_priv *pd = ap->private_data; - void __iomem *core_base = pd->core_base; - int is_read; - int quads_transferred; - int remainder; - int sector_quads_remaining; - int bug_present = 0; - - /* Only want to apply fix to reads */ - is_read = !(ioread32(core_base + DM_DBG1) & (ap->port_no ? - BIT(CORE_PORT1_DATA_DIR_BIT) : - BIT(CORE_PORT0_DATA_DIR_BIT))); - - /* Check for an incomplete transfer, i.e. not a multiple of 512 bytes - transferred (datacount_port register counts quads transferred) */ - quads_transferred = - ioread32(core_base + (ap->port_no ? - DATACOUNT_PORT1 : DATACOUNT_PORT0)); - - remainder = quads_transferred & 0x7f; - sector_quads_remaining = remainder ? (0x80 - remainder) : 0; - - if (is_read && (sector_quads_remaining == 2)) { - bug_present = 1; - } else if (sector_quads_remaining) { - if (is_read) { - ata_port_warn(ap, "SATA read fixup cannot deal with " - "%d quads remaining\n", - sector_quads_remaining); - } else { - ata_port_warn(ap, "SATA write fixup of %d quads " - "remaining not supported\n", - sector_quads_remaining); - } - } - - return bug_present; -} - -/* This port done an interrupt */ -static void sata_oxnas_port_irq(struct ata_port *ap, int force_error) -{ - struct ata_queued_cmd *qc; - struct sata_oxnas_port_priv *pd = ap->private_data; - void __iomem *port_base = pd->port_base; - - u32 int_status; - unsigned long flags = 0; - - DPRINTK("ENTER port %d irqstatus %x\n", ap->port_no, - ioread32(port_base + INT_STATUS)); - - if (ap->qc_active & (1ULL << ATA_TAG_INTERNAL)) { - qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - DPRINTK("completing non-ncq cmd\n"); - - if (qc) - ata_qc_complete(qc); - - return; - } - - qc = ata_qc_from_tag(ap, ap->link.active_tag); - - - /* record the port's interrupt */ - int_status = ioread32(port_base + INT_STATUS); - - /* If there's no command associated with this IRQ, ignore it. We may get - * spurious interrupts when cleaning-up after a failed command, ignore - * these too. */ - if (likely(qc)) { - /* get the status before any error cleanup */ - qc->err_mask = ac_err_mask(sata_oxnas_check_status(ap)); - if (force_error) { - /* Pretend there has been a link error */ - qc->err_mask |= AC_ERR_ATA_BUS; - DPRINTK(" ####force error####\n"); - } - /* tell libata we're done */ - local_irq_save(flags); - sata_oxnas_irq_clear(ap); - local_irq_restore(flags); - ata_qc_complete(qc); - } else { - VPRINTK("Ignoring interrupt, can't find the command tag=" - "%d %08x\n", ap->link.active_tag, ap->qc_active); - } - - /* maybe a hotplug event */ - if (unlikely(int_status & INT_LINK_SERROR)) { - u32 serror; - - sata_oxnas_scr_read_port(ap, SCR_ERROR, &serror); - if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) { - ata_ehi_hotplugged(&ap->link.eh_info); - ata_port_freeze(ap); - } - } -} - -/** - * irq_handler is the interrupt handling routine registered with the system, - * by libata. - */ -static irqreturn_t sata_oxnas_interrupt(int irq, void *dev_instance) -{ - struct ata_host *ah = dev_instance; - struct sata_oxnas_host_priv *hd = ah->private_data; - void __iomem *core_base = hd->core_base; - - u32 int_status; - irqreturn_t ret = IRQ_NONE; - u32 port_no; - u32 mask; - int bug_present; - - /* loop until there are no more interrupts */ - while ((int_status = (ioread32(core_base + CORE_INT_STATUS)) & - (COREINT_END | (COREINT_END << 1)))) { - - /* clear any interrupt */ - iowrite32(int_status, core_base + CORE_INT_CLEAR); - - /* Only need workaround_bug_6320 for single disk systems as dual - * disk will use uCode which prevents this read underrun problem - * from occurring. - * All single disk systems will use port 0 */ - for (port_no = 0; port_no < hd->n_ports; ++port_no) { - /* check the raw end of command interrupt to see if the - * port is done */ - mask = (COREINT_END << port_no); - if (!(int_status & mask)) - continue; - - /* this port had an interrupt, clear it */ - iowrite32(mask, core_base + CORE_INT_CLEAR); - /* check for bug 6320 only if no microcode was loaded */ - bug_present = (hd->current_ucode == UNKNOWN_MODE) && - sata_oxnas_bug_6320_detect(ah->ports[port_no]); - - sata_oxnas_port_irq(ah->ports[port_no], - bug_present); - ret = IRQ_HANDLED; - } - } - - return ret; -} - -/* - * scsi mid-layer and libata interface structures - */ -static struct scsi_host_template sata_oxnas_sht = { - ATA_NCQ_SHT("sata_oxnas"), - .can_queue = SATA_OXNAS_QUEUE_DEPTH, - .sg_tablesize = SATA_OXNAS_MAX_PRD, - .dma_boundary = ATA_DMA_BOUNDARY, -}; - - -static struct ata_port_operations sata_oxnas_ops = { - .inherits = &sata_port_ops, - .qc_prep = sata_oxnas_qc_prep, - .qc_issue = sata_oxnas_qc_issue, - .qc_fill_rtf = sata_oxnas_qc_fill_rtf, - .qc_new = sata_oxnas_qc_new, - .qc_free = sata_oxnas_qc_free, - - .scr_read = sata_oxnas_scr_read, - .scr_write = sata_oxnas_scr_write, - - .freeze = sata_oxnas_freeze, - .thaw = sata_oxnas_thaw, - .softreset = sata_oxnas_softreset, - /* .hardreset = sata_oxnas_hardreset, */ - .postreset = sata_oxnas_postreset, - .error_handler = sata_oxnas_error_handler, - .post_internal_cmd = sata_oxnas_post_internal_cmd, - - .port_start = sata_oxnas_port_start, - .port_stop = sata_oxnas_port_stop, - - .host_stop = sata_oxnas_host_stop, - /* .pmp_attach = sata_oxnas_pmp_attach, */ - /* .pmp_detach = sata_oxnas_pmp_detach, */ - .sff_check_status = sata_oxnas_check_status, - .acquire_hw = sata_oxnas_acquire_hw, -}; - -static const struct ata_port_info sata_oxnas_port_info = { - .flags = SATA_OXNAS_HOST_FLAGS, - .pio_mask = ATA_PIO4, - .udma_mask = ATA_UDMA6, - .port_ops = &sata_oxnas_ops, -}; - -static int sata_oxnas_probe(struct platform_device *ofdev) -{ - int retval = -ENXIO; - int n_ports = 0; - void __iomem *port_base = NULL; - void __iomem *dmactl_base = NULL; - void __iomem *sgdma_base = NULL; - void __iomem *core_base = NULL; - void __iomem *phy_base = NULL; - struct reset_control *rstc; - - struct resource res = {}; - struct sata_oxnas_host_priv *host_priv = NULL; - int irq = 0; - struct ata_host *host = NULL; - struct clk *clk = NULL; - - const struct ata_port_info *ppi[] = { &sata_oxnas_port_info, NULL }; - - of_property_read_u32(ofdev->dev.of_node, "nr-ports", &n_ports); - if (n_ports < 1 || n_ports > SATA_OXNAS_MAX_PORTS) - goto error_exit_with_cleanup; - - port_base = of_iomap(ofdev->dev.of_node, 0); - if (!port_base) - goto error_exit_with_cleanup; - - dmactl_base = of_iomap(ofdev->dev.of_node, 1); - if (!dmactl_base) - goto error_exit_with_cleanup; - - sgdma_base = of_iomap(ofdev->dev.of_node, 2); - if (!sgdma_base) - goto error_exit_with_cleanup; - - core_base = of_iomap(ofdev->dev.of_node, 3); - if (!core_base) - goto error_exit_with_cleanup; - - phy_base = of_iomap(ofdev->dev.of_node, 4); - if (!phy_base) - goto error_exit_with_cleanup; - - host_priv = devm_kzalloc(&ofdev->dev, - sizeof(struct sata_oxnas_host_priv), - GFP_KERNEL); - if (!host_priv) - goto error_exit_with_cleanup; - - host_priv->port_base = port_base; - host_priv->dmactl_base = dmactl_base; - host_priv->sgdma_base = sgdma_base; - host_priv->core_base = core_base; - host_priv->phy_base = phy_base; - host_priv->n_ports = n_ports; - host_priv->current_ucode = UNKNOWN_MODE; - - if (!of_address_to_resource(ofdev->dev.of_node, 5, &res)) { - host_priv->dma_base = res.start; - host_priv->dma_size = resource_size(&res); - } - - irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); - if (!irq) { - dev_err(&ofdev->dev, "invalid irq from platform\n"); - goto error_exit_with_cleanup; - } - host_priv->irq = irq; - - clk = of_clk_get(ofdev->dev.of_node, 0); - if (IS_ERR(clk)) { - retval = PTR_ERR(clk); - clk = NULL; - goto error_exit_with_cleanup; - } - host_priv->clk = clk; - - rstc = devm_reset_control_get(&ofdev->dev, "sata"); - if (IS_ERR(rstc)) { - retval = PTR_ERR(rstc); - goto error_exit_with_cleanup; - } - host_priv->rst_sata = rstc; - - rstc = devm_reset_control_get(&ofdev->dev, "link"); - if (IS_ERR(rstc)) { - retval = PTR_ERR(rstc); - goto error_exit_with_cleanup; - } - host_priv->rst_link = rstc; - - rstc = devm_reset_control_get(&ofdev->dev, "phy"); - if (IS_ERR(rstc)) { - retval = PTR_ERR(rstc); - goto error_exit_with_cleanup; - } - host_priv->rst_phy = rstc; - - /* allocate host structure */ - host = ata_host_alloc_pinfo(&ofdev->dev, ppi, n_ports); - - if (!host) { - retval = -ENOMEM; - goto error_exit_with_cleanup; - } - host->private_data = host_priv; - host->iomap = port_base; - - /* initialize core locking and queues */ - init_waitqueue_head(&host_priv->fast_wait_queue); - init_waitqueue_head(&host_priv->scsi_wait_queue); - spin_lock_init(&host_priv->phy_lock); - spin_lock_init(&host_priv->core_lock); - host_priv->core_locked = 0; - host_priv->reentrant_port_no = -1; - host_priv->hw_lock_count = 0; - host_priv->direct_lock_count = 0; - host_priv->locker_uid = 0; - host_priv->current_locker_type = SATA_UNLOCKED; - host_priv->isr_arg = NULL; - host_priv->isr_callback = NULL; - - /* initialize host controller */ - retval = sata_oxnas_init_controller(host); - if (retval) - goto error_exit_with_cleanup; - - /* - * Now, register with libATA core, this will also initiate the - * device discovery process, invoking our port_start() handler & - * error_handler() to execute a dummy softreset EH session - */ - ata_host_activate(host, irq, sata_oxnas_interrupt, SATA_OXNAS_IRQ_FLAG, - &sata_oxnas_sht); - - return 0; - -error_exit_with_cleanup: - if (irq) - irq_dispose_mapping(host_priv->irq); - if (clk) - clk_put(clk); - if (host) - ata_host_detach(host); - if (port_base) - iounmap(port_base); - if (sgdma_base) - iounmap(sgdma_base); - if (core_base) - iounmap(core_base); - if (phy_base) - iounmap(phy_base); - return retval; -} - - -static int sata_oxnas_remove(struct platform_device *ofdev) -{ - struct ata_host *host = dev_get_drvdata(&ofdev->dev); - struct sata_oxnas_host_priv *host_priv = host->private_data; - - ata_host_detach(host); - - irq_dispose_mapping(host_priv->irq); - iounmap(host_priv->port_base); - iounmap(host_priv->sgdma_base); - iounmap(host_priv->core_base); - - /* reset Controller, Link and PHY */ - reset_control_assert(host_priv->rst_sata); - reset_control_assert(host_priv->rst_link); - reset_control_assert(host_priv->rst_phy); - - /* Disable the clock to the SATA block */ - clk_disable_unprepare(host_priv->clk); - clk_put(host_priv->clk); - - return 0; -} - -#ifdef CONFIG_PM -static int sata_oxnas_suspend(struct platform_device *op, pm_message_t state) -{ - struct ata_host *host = dev_get_drvdata(&op->dev); - - return ata_host_suspend(host, state); -} - -static int sata_oxnas_resume(struct platform_device *op) -{ - struct ata_host *host = dev_get_drvdata(&op->dev); - int ret; - - ret = sata_oxnas_init_controller(host); - if (ret) { - dev_err(&op->dev, "Error initializing hardware\n"); - return ret; - } - ata_host_resume(host); - return 0; -} -#endif - - - -static struct of_device_id oxnas_sata_match[] = { - { - .compatible = "plxtech,nas782x-sata", - }, - {}, -}; - -MODULE_DEVICE_TABLE(of, oxnas_sata_match); - -static struct platform_driver oxnas_sata_driver = { - .driver = { - .name = "oxnas-sata", - .owner = THIS_MODULE, - .of_match_table = oxnas_sata_match, - }, - .probe = sata_oxnas_probe, - .remove = sata_oxnas_remove, -#ifdef CONFIG_PM - .suspend = sata_oxnas_suspend, - .resume = sata_oxnas_resume, -#endif -}; - -module_platform_driver(oxnas_sata_driver); - -MODULE_LICENSE("GPL"); -MODULE_VERSION("1.0"); -MODULE_AUTHOR("Oxford Semiconductor Ltd."); -MODULE_DESCRIPTION("low-level driver for Oxford 934 SATA core"); diff --git a/target/linux/oxnas/files/drivers/pci/controller/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/controller/pcie-oxnas.c deleted file mode 100644 index f2145e31b5..0000000000 --- a/target/linux/oxnas/files/drivers/pci/controller/pcie-oxnas.c +++ /dev/null @@ -1,674 +0,0 @@ -/* - * PCIe driver for PLX NAS782X SoCs - * - * Author: Ma Haijun - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../pci.h" - -#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114 - -static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) -{ - u32 val = readl_relaxed(p); - - val &= ~mask; - writel_relaxed(val, p); -} - -static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) -{ - u32 val = readl_relaxed(p); - - val |= mask; - writel_relaxed(val, p); -} - -static inline void oxnas_register_value_mask(void __iomem *p, - unsigned mask, unsigned new_value) -{ - /* TODO sanity check mask & new_value = new_value */ - u32 val = readl_relaxed(p); - - val &= ~mask; - val |= new_value; - writel_relaxed(val, p); -} - -#define VERSION_ID_MAGIC 0x082510b5 -#define LINK_UP_TIMEOUT_SECONDS 1 -#define NUM_CONTROLLERS 1 - -enum { - PCIE_DEVICE_TYPE_MASK = 0x0F, - PCIE_DEVICE_TYPE_ENDPOINT = 0, - PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1, - PCIE_DEVICE_TYPE_ROOT = 4, - - PCIE_LTSSM = BIT(4), - PCIE_READY_ENTR_L23 = BIT(9), - PCIE_LINK_UP = BIT(11), - PCIE_OBTRANS = BIT(12), -}; - -/* core config registers */ -enum { - PCI_CONFIG_VERSION_DEVICEID = 0, - PCI_CONFIG_COMMAND_STATUS = 4, -}; - -/* inbound config registers */ -enum { - IB_ADDR_XLATE_ENABLE = 0xFC, - - /* bits */ - ENABLE_IN_ADDR_TRANS = BIT(0), -}; - -/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */ -enum { - PCIE_POM0_MEM_ADDR = 0, - PCIE_POM1_MEM_ADDR = 4, - PCIE_IN0_MEM_ADDR = 8, - PCIE_IN1_MEM_ADDR = 12, - PCIE_IN_IO_ADDR = 16, - PCIE_IN_CFG0_ADDR = 20, - PCIE_IN_CFG1_ADDR = 24, - PCIE_IN_MSG_ADDR = 28, - PCIE_IN0_MEM_LIMIT = 32, - PCIE_IN1_MEM_LIMIT = 36, - PCIE_IN_IO_LIMIT = 40, - PCIE_IN_CFG0_LIMIT = 44, - PCIE_IN_CFG1_LIMIT = 48, - PCIE_IN_MSG_LIMIT = 52, - PCIE_AHB_SLAVE_CTRL = 56, - - PCIE_SLAVE_BE_SHIFT = 22, -}; - -#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT) -#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF) - -struct oxnas_pcie_shared { - /* seems all access are serialized, no lock required */ - int refcount; -}; - -/* Structure representing one PCIe interfaces */ -struct oxnas_pcie { - void __iomem *cfgbase; - void __iomem *base; - void __iomem *inbound; - struct regmap *sys_ctrl; - unsigned int outbound_offset; - unsigned int pcie_ctrl_offset; - struct phy *phy; - int haslink; - struct platform_device *pdev; - struct resource io; - struct resource cfg; - struct resource pre_mem; /* prefetchable */ - struct resource non_mem; /* non-prefetchable */ - struct resource busn; /* max available bus numbers */ - int card_reset; /* gpio pin, optional */ - unsigned hcsl_en; /* hcsl pci enable bit */ - struct clk *clk; - struct clk *busclk; /* for pcie bus, actually the PLLB */ - void *private_data[1]; - spinlock_t lock; -}; - -static struct oxnas_pcie_shared pcie_shared = { - .refcount = 0, -}; - -static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys) -{ - return sys->private_data; -} - - -static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes) -{ - regmap_update_bits(pcie->sys_ctrl, pcie->outbound_offset + PCIE_AHB_SLAVE_CTRL, - PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes)); - wmb(); -} - -static int oxnas_pcie_link_up(struct oxnas_pcie *pcie) -{ - unsigned long end; - unsigned int val; - - /* Poll for PCIE link up */ - end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ); - while (!time_after(jiffies, end)) { - regmap_read(pcie->sys_ctrl, pcie->pcie_ctrl_offset, &val); - if (val & PCIE_LINK_UP) - return 1; - } - return 0; -} - -static void oxnas_pcie_setup_hw(struct oxnas_pcie *pcie) -{ - /* We won't have any inbound address translation. This allows PCI - * devices to access anywhere in the AHB address map. Might be regarded - * as a bit dangerous, but let's get things working before we worry - * about that - */ - oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE, - ENABLE_IN_ADDR_TRANS); - wmb(); - - /* - * Program outbound translation windows - * - * Outbound window is what is referred to as "PCI client" region in HRM - * - * Could use the larger alternative address space to get >>64M regions - * for graphics cards etc., but will not bother at this point. - * - * IP bug means that AMBA window size must be a power of 2 - * - * Set mem0 window for first 16MB of outbound window non-prefetchable - * Set mem1 window for second 16MB of outbound window prefetchable - * Set io window for next 16MB of outbound window - * Set cfg0 for final 1MB of outbound window - * - * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for - * 820 that would need them - * - * Probably ideally want no offset between mem0 window start as seen by - * ARM and as seen on PCI bus and get Linux to assign memory regions to - * PCI devices using the same "PCI client" region start address as seen - * by ARM - */ - - /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */ - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_ADDR, pcie->non_mem.start); - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN0_MEM_LIMIT, pcie->non_mem.end); - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM0_MEM_ADDR, pcie->non_mem.start); - - /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */ - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_ADDR, pcie->pre_mem.start); - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN1_MEM_LIMIT, pcie->pre_mem.end); - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_POM1_MEM_ADDR, pcie->pre_mem.start); - - /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/ - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_ADDR, pcie->io.start); - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_IO_LIMIT, pcie->io.end); - - - /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/ - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_ADDR, pcie->cfg.start); - regmap_write(pcie->sys_ctrl, pcie->outbound_offset + PCIE_IN_CFG0_LIMIT, pcie->cfg.end); - wmb(); - - /* Enable outbound address translation */ - regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, PCIE_OBTRANS, PCIE_OBTRANS); - wmb(); - - /* - * Program PCIe command register for core to: - * enable memory space - * enable bus master - * enable io - */ - writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS); - /* which is which */ - wmb(); -} - -static unsigned oxnas_pcie_cfg_to_offset( - struct pci_sys_data *sys, - unsigned char bus_number, - unsigned int devfn, - int where) -{ - unsigned int function = PCI_FUNC(devfn); - unsigned int slot = PCI_SLOT(devfn); - unsigned char bus_number_offset; - - bus_number_offset = bus_number - sys->busnr; - - /* - * We'll assume for now that the offset, function, slot, bus encoding - * should map onto linear, contiguous addresses in PCIe config space, - * albeit that the majority will be unused as only slot 0 is valid for - * any PCIe bus and most devices have only function 0 - * - * Could be that PCIe in fact works by not encoding the slot number into - * the config space address as it's known that only slot 0 is valid. - * We'll have to experiment if/when we get a PCIe switch connected to - * the PCIe host - */ - return (bus_number_offset << 20) | (slot << 15) | (function << 12) | - (where & ~3); -} - -/* PCI configuration space write function */ -static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn, - int where, int size, u32 val) -{ - unsigned long flags; - struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata); - unsigned offset; - u32 value; - u32 lanes; - - /* Only a single device per bus for PCIe point-to-point links */ - if (PCI_SLOT(devfn) > 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (!pcie->haslink) - return PCIBIOS_DEVICE_NOT_FOUND; - - offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn, - where); - - value = val << (8 * (where & 3)); - lanes = (0xf >> (4-size)) << (where & 3); - /* it race with mem and io write, but the possibility is low, normally - * all config writes happens at driver initialize stage, wont interleave - * with others. - * and many pcie cards use dword (4bytes) access mem/io access only, - * so not bother to copy that ugly work-around now. */ - spin_lock_irqsave(&pcie->lock, flags); - set_out_lanes(pcie, lanes); - writel_relaxed(value, pcie->cfgbase + offset); - set_out_lanes(pcie, 0xf); - spin_unlock_irqrestore(&pcie->lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -/* PCI configuration space read function */ -static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, - int size, u32 *val) -{ - struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata); - unsigned offset; - u32 value; - u32 left_bytes, right_bytes; - - /* Only a single device per bus for PCIe point-to-point links */ - if (PCI_SLOT(devfn) > 0) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - if (!pcie->haslink) { - *val = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn, - where); - value = readl_relaxed(pcie->cfgbase + offset); - left_bytes = where & 3; - right_bytes = 4 - left_bytes - size; - value <<= right_bytes * 8; - value >>= (left_bytes + right_bytes) * 8; - *val = value; - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops oxnas_pcie_ops = { - .read = oxnas_pcie_rd_conf, - .write = oxnas_pcie_wr_conf, -}; - -static int oxnas_pcie_setup(int nr, struct pci_sys_data *sys) -{ - struct oxnas_pcie *pcie = sys_to_pcie(sys); - - pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset); - pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset); - pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset); - pci_add_resource(&sys->resources, &pcie->busn); - if (sys->busnr == 0) { /* default one */ - sys->busnr = pcie->busn.start; - } - /* do not use devm_ioremap_resource, it does not like cfg resource */ - pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start, - resource_size(&pcie->cfg)); - if (!pcie->cfgbase) - return -ENOMEM; - - oxnas_pcie_setup_hw(pcie); - - return 1; -} - -static void oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie) -{ - struct hw_pci hw; - int i; - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i < NUM_CONTROLLERS; i++) - pcie->private_data[i] = pcie; - - hw.nr_controllers = NUM_CONTROLLERS; -/* I think use stack pointer is a bad idea though it is valid in this case */ - hw.private_data = pcie->private_data; - hw.setup = oxnas_pcie_setup; - hw.map_irq = of_irq_parse_and_map_pci; - hw.ops = &oxnas_pcie_ops; - - /* pass dev to maintain of tree, interrupt mapping rely on this */ - pci_common_init_dev(dev, &hw); -} - -static int oxnas_pcie_shared_init(struct platform_device *pdev, struct oxnas_pcie *pcie) -{ - if (++pcie_shared.refcount == 1) { - phy_init(pcie->phy); - phy_power_on(pcie->phy); - return 0; - } else { - return 0; - } -} - -#if 0 -/* maybe we will call it when enter low power state */ -static void oxnas_pcie_shared_deinit(struct platform_device *pdev) -{ - if (--pcie_shared.refcount == 0) { - /* no cleanup needed */; - } -} -#endif - -static int -oxnas_pcie_map_registers(struct platform_device *pdev, - struct device_node *np, - struct oxnas_pcie *pcie) -{ - struct resource regs; - int ret = 0; - u32 outbound_ctrl_offset; - u32 pcie_ctrl_offset; - - ret = of_address_to_resource(np, 0, ®s); - if (ret) { - dev_err(&pdev->dev, "failed to parse base register space\n"); - return -EINVAL; - } - - pcie->base = devm_ioremap_resource(&pdev->dev, ®s); - if (!pcie->base) { - dev_err(&pdev->dev, "failed to map base register space\n"); - return -ENOMEM; - } - - ret = of_address_to_resource(np, 1, ®s); - if (ret) { - dev_err(&pdev->dev, "failed to parse inbound register space\n"); - return -EINVAL; - } - - pcie->inbound = devm_ioremap_resource(&pdev->dev, ®s); - if (!pcie->inbound) { - dev_err(&pdev->dev, "failed to map inbound register space\n"); - return -ENOMEM; - } - - pcie->phy = devm_of_phy_get(&pdev->dev, np, NULL); - if (IS_ERR(pcie->phy)) { - if (PTR_ERR(pcie->phy) == -EPROBE_DEFER) { - dev_err(&pdev->dev, "failed to probe phy\n"); - return PTR_ERR(pcie->phy); - } - dev_warn(&pdev->dev, "phy not attached\n"); - pcie->phy = NULL; - } - - if (of_property_read_u32(np, "plxtech,pcie-outbound-offset", - &outbound_ctrl_offset)) { - dev_err(&pdev->dev, "failed to parse outbound register offset\n"); - return -EINVAL; - } - pcie->outbound_offset = outbound_ctrl_offset; - - if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset", - &pcie_ctrl_offset)) { - dev_err(&pdev->dev, "failed to parse pcie-ctrl register offset\n"); - return -EINVAL; - } - pcie->pcie_ctrl_offset = pcie_ctrl_offset; - - return 0; -} - -static int oxnas_pcie_init_res(struct platform_device *pdev, - struct oxnas_pcie *pcie, - struct device_node *np) -{ - struct of_pci_range range; - struct of_pci_range_parser parser; - int ret; - - if (of_pci_range_parser_init(&parser, np)) - return -EINVAL; - - /* Get the I/O and memory ranges from DT */ - for_each_of_pci_range(&parser, &range) { - - unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; - if (restype == IORESOURCE_IO) { - of_pci_range_to_resource(&range, np, &pcie->io); - pcie->io.name = "I/O"; - } - if (restype == IORESOURCE_MEM) { - if (range.flags & IORESOURCE_PREFETCH) { - of_pci_range_to_resource(&range, np, &pcie->pre_mem); - pcie->pre_mem.name = "PRE MEM"; - } else { - of_pci_range_to_resource(&range, np, &pcie->non_mem); - pcie->non_mem.name = "NON MEM"; - } - - } - if (restype == 0) - of_pci_range_to_resource(&range, np, &pcie->cfg); - } - - /* Get the bus range */ - ret = of_pci_parse_bus_range(np, &pcie->busn); - - if (ret) { - dev_err(&pdev->dev, "failed to parse bus-range property: %d\n", - ret); - return ret; - } - - pcie->card_reset = of_get_gpio(np, 0); - if (pcie->card_reset < 0) - dev_info(&pdev->dev, "card reset gpio pin not exists\n"); - - if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en)) - return -EINVAL; - - pcie->clk = of_clk_get_by_name(np, "pcie"); - if (IS_ERR(pcie->clk)) { - return PTR_ERR(pcie->clk); - } - - pcie->busclk = of_clk_get_by_name(np, "busclk"); - if (IS_ERR(pcie->busclk)) { - clk_put(pcie->clk); - return PTR_ERR(pcie->busclk); - } - - return 0; -} - -static void oxnas_pcie_init_hw(struct platform_device *pdev, - struct oxnas_pcie *pcie) -{ - u32 version_id; - int ret; - - clk_prepare_enable(pcie->busclk); - - /* reset PCIe cards use hard-wired gpio pin */ - if (pcie->card_reset >= 0 && - !gpio_direction_output(pcie->card_reset, 0)) { - wmb(); - mdelay(10); - /* must tri-state the pin to pull it up */ - gpio_direction_input(pcie->card_reset); - wmb(); - mdelay(100); - } - - /* ToDo: use phy power-on port... */ - regmap_update_bits(pcie->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, - BIT(pcie->hcsl_en), BIT(pcie->hcsl_en)); - - /* core */ - ret = device_reset(&pdev->dev); - if (ret) { - dev_err(&pdev->dev, "core reset failed %d\n", ret); - return; - } - - /* Start PCIe core clocks */ - clk_prepare_enable(pcie->clk); - - version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID); - dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id); - - if (version_id != VERSION_ID_MAGIC) { - dev_info(&pdev->dev, "PCIe controller not found\n"); - pcie->haslink = 0; - return; - } - - /* allow entry to L23 state */ - regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, - PCIE_READY_ENTR_L23, PCIE_READY_ENTR_L23); - - /* Set PCIe core into RootCore mode */ - regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, - PCIE_DEVICE_TYPE_MASK, PCIE_DEVICE_TYPE_ROOT); - wmb(); - - /* Bring up the PCI core */ - regmap_write_bits(pcie->sys_ctrl, pcie->pcie_ctrl_offset, - PCIE_LTSSM, PCIE_LTSSM); - wmb(); -} - -static int oxnas_pcie_probe(struct platform_device *pdev) -{ - struct oxnas_pcie *pcie; - struct device_node *np = pdev->dev.of_node; - int ret; - - pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie), - GFP_KERNEL); - if (!pcie) - return -ENOMEM; - - pcie->pdev = pdev; - pcie->haslink = 1; - spin_lock_init(&pcie->lock); - - pcie->sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl"); - if (IS_ERR(pcie->sys_ctrl)) - return PTR_ERR(pcie->sys_ctrl); - - ret = oxnas_pcie_init_res(pdev, pcie, np); - if (ret) - return ret; - if (pcie->card_reset >= 0) { - ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN, - dev_name(&pdev->dev)); - if (ret) { - dev_err(&pdev->dev, "cannot request gpio pin %d\n", - pcie->card_reset); - return ret; - } - } - - ret = oxnas_pcie_map_registers(pdev, np, pcie); - if (ret) { - dev_err(&pdev->dev, "cannot map registers\n"); - goto err_free_gpio; - } - - ret = oxnas_pcie_shared_init(pdev, pcie); - if (ret) - goto err_free_gpio; - - /* if hw not found, haslink cleared */ - oxnas_pcie_init_hw(pdev, pcie); - - if (pcie->haslink && oxnas_pcie_link_up(pcie)) { - pcie->haslink = 1; - dev_info(&pdev->dev, "link up\n"); - } else { - pcie->haslink = 0; - dev_info(&pdev->dev, "link down\n"); - } - /* should we register our controller even when pcie->haslink is 0 ? */ - /* register the controller with framework */ - oxnas_pcie_enable(&pdev->dev, pcie); - - return 0; - -err_free_gpio: - if (pcie->card_reset) - gpio_free(pcie->card_reset); - - return ret; -} - -static const struct of_device_id oxnas_pcie_of_match_table[] = { - { .compatible = "plxtech,nas782x-pcie", }, - {}, -}; - -static struct platform_driver oxnas_pcie_driver = { - .driver = { - .name = "oxnas-pcie", - .suppress_bind_attrs = true, - .of_match_table = oxnas_pcie_of_match_table, - }, - .probe = oxnas_pcie_probe, -}; - -builtin_platform_driver(oxnas_pcie_driver); diff --git a/target/linux/oxnas/files/drivers/phy/phy-oxnas-pcie.c b/target/linux/oxnas/files/drivers/phy/phy-oxnas-pcie.c deleted file mode 100644 index 39203239a0..0000000000 --- a/target/linux/oxnas/files/drivers/phy/phy-oxnas-pcie.c +++ /dev/null @@ -1,148 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2019 Daniel Golle - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define ADDR_VAL(val) ((val) & 0xFFFF) -#define DATA_VAL(val) ((val) & 0xFFFF) - -#define SYS_CTRL_HCSL_CTRL_REGOFFSET 0x114 - -enum { - HCSL_BIAS_ON = BIT(0), - HCSL_PCIE_EN = BIT(1), - HCSL_PCIEA_EN = BIT(2), - HCSL_PCIEB_EN = BIT(3), -}; - -enum { - /* pcie phy reg offset */ - PHY_ADDR = 0, - PHY_DATA = 4, - /* phy data reg bits */ - READ_EN = BIT(16), - WRITE_EN = BIT(17), - CAP_DATA = BIT(18), -}; - -struct oxnas_pcie_phy { - struct device *dev; - void __iomem *membase; - const struct phy_ops *ops; - struct regmap *sys_ctrl; - struct reset_control *rstc; -}; - -static int oxnas_pcie_phy_init(struct phy *phy) -{ - struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy); - int ret; - - /* generate clocks from HCSL buffers, shared parts */ - regmap_write(pciephy->sys_ctrl, SYS_CTRL_HCSL_CTRL_REGOFFSET, HCSL_BIAS_ON|HCSL_PCIE_EN); - - /* Ensure PCIe PHY is properly reset */ - ret = reset_control_reset(pciephy->rstc); - - if (ret) { - dev_err(pciephy->dev, "phy reset failed %d\n", ret); - return ret; - } - - return 0; -} - -static int oxnas_pcie_phy_power_on(struct phy *phy) -{ - struct oxnas_pcie_phy *pciephy = phy_get_drvdata(phy); - - /* Enable PCIe Pre-Emphasis: What these value means? */ - writel(ADDR_VAL(0x0014), pciephy->membase + PHY_ADDR); - writel(DATA_VAL(0xce10) | CAP_DATA, pciephy->membase + PHY_DATA); - writel(DATA_VAL(0xce10) | WRITE_EN, pciephy->membase + PHY_DATA); - - writel(ADDR_VAL(0x2004), pciephy->membase + PHY_ADDR); - writel(DATA_VAL(0x82c7) | CAP_DATA, pciephy->membase + PHY_DATA); - writel(DATA_VAL(0x82c7) | WRITE_EN, pciephy->membase + PHY_DATA); - - return 0; -} - -static const struct phy_ops ops = { - .init = oxnas_pcie_phy_init, - .power_on = oxnas_pcie_phy_power_on, - .owner = THIS_MODULE, -}; - -static int oxnas_pcie_phy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = pdev->dev.of_node; - struct phy *generic_phy; - struct phy_provider *phy_provider; - struct oxnas_pcie_phy *pciephy; - struct regmap *sys_ctrl; - struct reset_control *rstc; - void __iomem *membase; - - membase = of_iomap(np, 0); - if (IS_ERR(membase)) - return PTR_ERR(membase); - - sys_ctrl = syscon_regmap_lookup_by_compatible("oxsemi,ox820-sys-ctrl"); - if (IS_ERR(sys_ctrl)) - return PTR_ERR(sys_ctrl); - - rstc = devm_reset_control_get_shared(dev, "phy"); - if (IS_ERR(rstc)) - return PTR_ERR(rstc); - - pciephy = devm_kzalloc(dev, sizeof(*pciephy), GFP_KERNEL); - if (!pciephy) - return -ENOMEM; - - pciephy->sys_ctrl = sys_ctrl; - pciephy->rstc = rstc; - pciephy->membase = membase; - pciephy->dev = dev; - pciephy->ops = &ops; - - generic_phy = devm_phy_create(dev, dev->of_node, pciephy->ops); - if (IS_ERR(generic_phy)) { - dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(generic_phy); - } - - phy_set_drvdata(generic_phy, pciephy); - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - - return PTR_ERR_OR_ZERO(phy_provider); -} - -static const struct of_device_id oxnas_pcie_phy_id_table[] = { - { .compatible = "oxsemi,ox820-pcie-phy" }, - { }, -}; - -static struct platform_driver oxnas_pcie_phy_driver = { - .probe = oxnas_pcie_phy_probe, - .driver = { - .name = "ox820-pcie-phy", - .of_match_table = oxnas_pcie_phy_id_table, - }, -}; - -builtin_platform_driver(oxnas_pcie_phy_driver); diff --git a/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c b/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c deleted file mode 100644 index e0c126eae0..0000000000 --- a/target/linux/oxnas/files/drivers/power/reset/oxnas-restart.c +++ /dev/null @@ -1,229 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0) -/* - * oxnas SoC reset driver - * based on: - * Microsemi MIPS SoC reset driver - * and ox820_assert_system_reset() written by Ma Hajun - * - * License: GPL - * Copyright (c) 2013 Ma Hajun - * Copyright (c) 2017 Microsemi Corporation - * Copyright (c) 2019 Daniel Golle - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* bit numbers of reset control register */ -#define OX820_SYS_CTRL_RST_SCU 0 -#define OX820_SYS_CTRL_RST_COPRO 1 -#define OX820_SYS_CTRL_RST_ARM0 2 -#define OX820_SYS_CTRL_RST_ARM1 3 -#define OX820_SYS_CTRL_RST_USBHS 4 -#define OX820_SYS_CTRL_RST_USBHSPHYA 5 -#define OX820_SYS_CTRL_RST_MACA 6 -#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA -#define OX820_SYS_CTRL_RST_PCIEA 7 -#define OX820_SYS_CTRL_RST_SGDMA 8 -#define OX820_SYS_CTRL_RST_CIPHER 9 -#define OX820_SYS_CTRL_RST_DDR 10 -#define OX820_SYS_CTRL_RST_SATA 11 -#define OX820_SYS_CTRL_RST_SATA_LINK 12 -#define OX820_SYS_CTRL_RST_SATA_PHY 13 -#define OX820_SYS_CTRL_RST_PCIEPHY 14 -#define OX820_SYS_CTRL_RST_STATIC 15 -#define OX820_SYS_CTRL_RST_GPIO 16 -#define OX820_SYS_CTRL_RST_UART1 17 -#define OX820_SYS_CTRL_RST_UART2 18 -#define OX820_SYS_CTRL_RST_MISC 19 -#define OX820_SYS_CTRL_RST_I2S 20 -#define OX820_SYS_CTRL_RST_SD 21 -#define OX820_SYS_CTRL_RST_MACB 22 -#define OX820_SYS_CTRL_RST_PCIEB 23 -#define OX820_SYS_CTRL_RST_VIDEO 24 -#define OX820_SYS_CTRL_RST_DDR_PHY 25 -#define OX820_SYS_CTRL_RST_USBHSPHYB 26 -#define OX820_SYS_CTRL_RST_USBDEV 27 -#define OX820_SYS_CTRL_RST_ARMDBG 29 -#define OX820_SYS_CTRL_RST_PLLA 30 -#define OX820_SYS_CTRL_RST_PLLB 31 - -/* bit numbers of clock control register */ -#define OX820_SYS_CTRL_CLK_COPRO 0 -#define OX820_SYS_CTRL_CLK_DMA 1 -#define OX820_SYS_CTRL_CLK_CIPHER 2 -#define OX820_SYS_CTRL_CLK_SD 3 -#define OX820_SYS_CTRL_CLK_SATA 4 -#define OX820_SYS_CTRL_CLK_I2S 5 -#define OX820_SYS_CTRL_CLK_USBHS 6 -#define OX820_SYS_CTRL_CLK_MACA 7 -#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA -#define OX820_SYS_CTRL_CLK_PCIEA 8 -#define OX820_SYS_CTRL_CLK_STATIC 9 -#define OX820_SYS_CTRL_CLK_MACB 10 -#define OX820_SYS_CTRL_CLK_PCIEB 11 -#define OX820_SYS_CTRL_CLK_REF600 12 -#define OX820_SYS_CTRL_CLK_USBDEV 13 -#define OX820_SYS_CTRL_CLK_DDR 14 -#define OX820_SYS_CTRL_CLK_DDRPHY 15 -#define OX820_SYS_CTRL_CLK_DDRCK 16 - -/* Regmap offsets */ -#define OX820_CLK_SET_REGOFFSET 0x2c -#define OX820_CLK_CLR_REGOFFSET 0x30 -#define OX820_RST_SET_REGOFFSET 0x34 -#define OX820_RST_CLR_REGOFFSET 0x38 -#define OX820_SECONDARY_SEL_REGOFFSET 0x14 -#define OX820_TERTIARY_SEL_REGOFFSET 0x8c -#define OX820_QUATERNARY_SEL_REGOFFSET 0x94 -#define OX820_DEBUG_SEL_REGOFFSET 0x9c -#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4 -#define OX820_PULLUP_SEL_REGOFFSET 0xac -#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014 -#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c -#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094 -#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c -#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4 -#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac - - -struct oxnas_restart_context { - struct regmap *sys_ctrl; - struct notifier_block restart_handler; -}; - -static int ox820_restart_handle(struct notifier_block *this, - unsigned long mode, void *cmd) -{ - struct oxnas_restart_context *ctx = container_of(this, struct - oxnas_restart_context, - restart_handler); - u32 value; - - /* Assert reset to cores as per power on defaults - * Don't touch the DDR interface as things will come to an impromptu stop - * NB Possibly should be asserting reset for PLLB, but there are timing - * concerns here according to the docs */ - value = BIT(OX820_SYS_CTRL_RST_COPRO) | - BIT(OX820_SYS_CTRL_RST_USBHS) | - BIT(OX820_SYS_CTRL_RST_USBHSPHYA) | - BIT(OX820_SYS_CTRL_RST_MACA) | - BIT(OX820_SYS_CTRL_RST_PCIEA) | - BIT(OX820_SYS_CTRL_RST_SGDMA) | - BIT(OX820_SYS_CTRL_RST_CIPHER) | - BIT(OX820_SYS_CTRL_RST_SATA) | - BIT(OX820_SYS_CTRL_RST_SATA_LINK) | - BIT(OX820_SYS_CTRL_RST_SATA_PHY) | - BIT(OX820_SYS_CTRL_RST_PCIEPHY) | - BIT(OX820_SYS_CTRL_RST_STATIC) | - BIT(OX820_SYS_CTRL_RST_UART1) | - BIT(OX820_SYS_CTRL_RST_UART2) | - BIT(OX820_SYS_CTRL_RST_MISC) | - BIT(OX820_SYS_CTRL_RST_I2S) | - BIT(OX820_SYS_CTRL_RST_SD) | - BIT(OX820_SYS_CTRL_RST_MACB) | - BIT(OX820_SYS_CTRL_RST_PCIEB) | - BIT(OX820_SYS_CTRL_RST_VIDEO) | - BIT(OX820_SYS_CTRL_RST_USBHSPHYB) | - BIT(OX820_SYS_CTRL_RST_USBDEV); - - regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); - - /* Release reset to cores as per power on defaults */ - regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET, BIT(OX820_SYS_CTRL_RST_GPIO)); - - /* Disable clocks to cores as per power-on defaults - must leave DDR - * related clocks enabled otherwise we'll stop rather abruptly. */ - value = - BIT(OX820_SYS_CTRL_CLK_COPRO) | - BIT(OX820_SYS_CTRL_CLK_DMA) | - BIT(OX820_SYS_CTRL_CLK_CIPHER) | - BIT(OX820_SYS_CTRL_CLK_SD) | - BIT(OX820_SYS_CTRL_CLK_SATA) | - BIT(OX820_SYS_CTRL_CLK_I2S) | - BIT(OX820_SYS_CTRL_CLK_USBHS) | - BIT(OX820_SYS_CTRL_CLK_MAC) | - BIT(OX820_SYS_CTRL_CLK_PCIEA) | - BIT(OX820_SYS_CTRL_CLK_STATIC) | - BIT(OX820_SYS_CTRL_CLK_MACB) | - BIT(OX820_SYS_CTRL_CLK_PCIEB) | - BIT(OX820_SYS_CTRL_CLK_REF600) | - BIT(OX820_SYS_CTRL_CLK_USBDEV); - - regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value); - - /* Enable clocks to cores as per power-on defaults */ - - /* Set sys-control pin mux'ing as per power-on defaults */ - regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0); - - regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0); - regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0); - - /* No need to save any state, as the ROM loader can determine whether - * reset is due to power cycling or programatic action, just hit the - * (self-clearing) CPU reset bit of the block reset register */ - value = - BIT(OX820_SYS_CTRL_RST_SCU) | - BIT(OX820_SYS_CTRL_RST_ARM0) | - BIT(OX820_SYS_CTRL_RST_ARM1); - - regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value); - - pr_emerg("Unable to restart system\n"); - return NOTIFY_DONE; -} - -static int ox820_restart_probe(struct platform_device *pdev) -{ - struct oxnas_restart_context *ctx; - struct regmap *sys_ctrl; - struct device *dev = &pdev->dev; - int err = 0; - - sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node); - if (IS_ERR(sys_ctrl)) - return PTR_ERR(sys_ctrl); - - ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); - if (!ctx) - return -ENOMEM; - - ctx->sys_ctrl = sys_ctrl; - ctx->restart_handler.notifier_call = ox820_restart_handle; - ctx->restart_handler.priority = 192; - err = register_restart_handler(&ctx->restart_handler); - if (err) - dev_err(dev, "can't register restart notifier (err=%d)\n", err); - - return err; -} - -static const struct of_device_id ox820_restart_of_match[] = { - { .compatible = "oxsemi,ox820-sys-ctrl" }, - {} -}; - -static struct platform_driver ox820_restart_driver = { - .probe = ox820_restart_probe, - .driver = { - .name = "ox820-chip-reset", - .of_match_table = ox820_restart_of_match, - }, -}; -builtin_platform_driver(ox820_restart_driver); diff --git a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c deleted file mode 100644 index 79c4fa3a95..0000000000 --- a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * drivers/usb/host/ehci-oxnas.c - * - * Tzachi Perelstein - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define USBHSMPH_CTRL_REGOFFSET 0x40 -#define USBHSMPH_STAT_REGOFFSET 0x44 -#define REF300_DIV_REGOFFSET 0xF8 -#define USBHSPHY_CTRL_REGOFFSET 0x84 -#define USB_CTRL_REGOFFSET 0x90 -#define PLLB_DIV_CTRL_REGOFFSET 0x1000F8 -#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 -#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 -#define USBHSPHY_ATE_ESET 14 -#define USBHSPHY_TEST_DIN 6 -#define USBHSPHY_TEST_ADD 2 -#define USBHSPHY_TEST_DOUT_SEL 1 -#define USBHSPHY_TEST_CLK 0 - -#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 -#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) -#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) -#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) - -#define USBAMUX_DEVICE BIT(4) - -#define USBPHY_REFCLKDIV_SHIFT 2 -#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) -#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) -#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) - -#define USB_CTRL_USB_CKO_SEL_BIT 0 - -#define USB_INT_CLK_XTAL 0 -#define USB_INT_CLK_REF300 2 -#define USB_INT_CLK_PLLB 3 - -#define REF300_DIV_INT_SHIFT 8 -#define REF300_DIV_FRAC_SHIFT 0 -#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) -#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) - -#define PLLB_BYPASS 1 -#define PLLB_ENSAT 3 -#define PLLB_OUTDIV 4 -#define PLLB_REFDIV 8 -#define PLLB_DIV_INT_SHIFT 8 -#define PLLB_DIV_FRAC_SHIFT 0 -#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) -#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) - -#include "ehci.h" - -struct oxnas_hcd { - struct clk *clk; - struct clk *refsrc; - struct clk *phyref; - int use_pllb; - int use_phya; - struct reset_control *rst_host; - struct reset_control *rst_phya; - struct reset_control *rst_phyb; - struct regmap *syscon; -}; - -#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller" - -static struct hc_driver __read_mostly oxnas_hc_driver; - -static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas) -{ - if (oxnas->use_pllb) { - /* enable pllb */ - clk_prepare_enable(oxnas->refsrc); - /* enable ref600 */ - clk_prepare_enable(oxnas->phyref); - /* 600MHz pllb divider for 12MHz */ - regmap_write_bits(oxnas->syscon, PLLB_DIV_CTRL_REGOFFSET, 0xffff, PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0)); - } else { - /* ref 300 divider for 12MHz */ - regmap_write_bits(oxnas->syscon, REF300_DIV_REGOFFSET, 0xffff, REF300_DIV_INT(25) | REF300_DIV_FRAC(0)); - } - - /* Ensure the USB block is properly reset */ - reset_control_reset(oxnas->rst_host); - reset_control_reset(oxnas->rst_phya); - reset_control_reset(oxnas->rst_phyb); - - /* Force the high speed clock to be generated all the time, via serial - programming of the USB HS PHY */ - regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, - (2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN)); - - regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, - (1UL << USBHSPHY_TEST_CLK) | - (2UL << USBHSPHY_TEST_ADD) | - (0xe0UL << USBHSPHY_TEST_DIN)); - - regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, - (0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN)); - - regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, - (1UL << USBHSPHY_TEST_CLK) | - (0xfUL << USBHSPHY_TEST_ADD) | - (0xaaUL << USBHSPHY_TEST_DIN)); - - if (oxnas->use_pllb) /* use pllb clock */ - regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff, - USB_CLK_INTERNAL | USB_INT_CLK_PLLB); - else /* use ref300 derived clock */ - regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff, - USB_CLK_INTERNAL | USB_INT_CLK_REF300); - - if (oxnas->use_phya) { - /* Configure USB PHYA as a host */ - regmap_update_bits(oxnas->syscon, USB_CTRL_REGOFFSET, USBAMUX_DEVICE, 0); - } - - /* Enable the clock to the USB block */ - clk_prepare_enable(oxnas->clk); -} - -static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas) -{ - reset_control_assert(oxnas->rst_host); - reset_control_assert(oxnas->rst_phya); - reset_control_assert(oxnas->rst_phyb); - - if (oxnas->use_pllb) { - clk_disable_unprepare(oxnas->phyref); - clk_disable_unprepare(oxnas->refsrc); - } - clk_disable_unprepare(oxnas->clk); -} - -static int ehci_oxnas_reset(struct usb_hcd *hcd) -{ - #define txttfill_tuning reserved2[0] - - struct ehci_hcd *ehci; - u32 tmp; - int retval = ehci_setup(hcd); - if (retval) - return retval; - - ehci = hcd_to_ehci(hcd); - tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning); - tmp &= ~0x00ff0000; - tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */ - tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/ - ehci_writel(ehci, tmp, &ehci->regs->txfill_tuning); - - tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning); - tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */ - ehci_writel(ehci, tmp, &ehci->regs->txttfill_tuning); - - return retval; -} - -static int ehci_oxnas_drv_probe(struct platform_device *ofdev) -{ - struct device_node *np = ofdev->dev.of_node; - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource res; - struct oxnas_hcd *oxnas; - int irq, err; - struct reset_control *rstc; - - if (usb_disabled()) - return -ENODEV; - - if (!ofdev->dev.dma_mask) - ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask; - if (!ofdev->dev.coherent_dma_mask) - ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); - - hcd = usb_create_hcd(&oxnas_hc_driver, &ofdev->dev, - dev_name(&ofdev->dev)); - if (!hcd) - return -ENOMEM; - - err = of_address_to_resource(np, 0, &res); - if (err) - goto err_res; - - hcd->rsrc_start = res.start; - hcd->rsrc_len = resource_size(&res); - - hcd->regs = devm_ioremap_resource(&ofdev->dev, &res); - if (IS_ERR(hcd->regs)) { - dev_err(&ofdev->dev, "devm_ioremap_resource failed\n"); - err = PTR_ERR(hcd->regs); - goto err_ioremap; - } - - oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; - - oxnas->use_pllb = of_property_read_bool(np, "oxsemi,ehci_use_pllb"); - oxnas->use_phya = of_property_read_bool(np, "oxsemi,ehci_use_phya"); - - oxnas->syscon = syscon_regmap_lookup_by_phandle(np, "oxsemi,sys-ctrl"); - if (IS_ERR(oxnas->syscon)) { - err = PTR_ERR(oxnas->syscon); - goto err_syscon; - } - - oxnas->clk = of_clk_get_by_name(np, "usb"); - if (IS_ERR(oxnas->clk)) { - err = PTR_ERR(oxnas->clk); - goto err_clk; - } - - if (oxnas->use_pllb) { - oxnas->refsrc = of_clk_get_by_name(np, "refsrc"); - if (IS_ERR(oxnas->refsrc)) { - err = PTR_ERR(oxnas->refsrc); - goto err_refsrc; - } - oxnas->phyref = of_clk_get_by_name(np, "phyref"); - if (IS_ERR(oxnas->refsrc)) { - err = PTR_ERR(oxnas->refsrc); - goto err_phyref; - } - - } else { - oxnas->refsrc = NULL; - oxnas->phyref = NULL; - } - - rstc = devm_reset_control_get(&ofdev->dev, "host"); - if (IS_ERR(rstc)) { - err = PTR_ERR(rstc); - goto err_rst; - } - oxnas->rst_host = rstc; - - rstc = devm_reset_control_get(&ofdev->dev, "phya"); - if (IS_ERR(rstc)) { - err = PTR_ERR(rstc); - goto err_rst; - } - oxnas->rst_phya = rstc; - - rstc = devm_reset_control_get(&ofdev->dev, "phyb"); - if (IS_ERR(rstc)) { - err = PTR_ERR(rstc); - goto err_rst; - } - oxnas->rst_phyb = rstc; - - irq = irq_of_parse_and_map(np, 0); - if (!irq) { - dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n"); - err = -EBUSY; - goto err_irq; - } - - hcd->has_tt = 1; - ehci = hcd_to_ehci(hcd); - ehci->caps = hcd->regs; - - start_oxnas_usb_ehci(oxnas); - - err = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (err) - goto err_hcd; - - return 0; - -err_hcd: - stop_oxnas_usb_ehci(oxnas); -err_irq: -err_rst: - if (oxnas->phyref) - clk_put(oxnas->phyref); -err_phyref: - if (oxnas->refsrc) - clk_put(oxnas->refsrc); -err_refsrc: - clk_put(oxnas->clk); -err_syscon: -err_clk: -err_ioremap: -err_res: - usb_put_hcd(hcd); - - return err; -} - -static int ehci_oxnas_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; - - usb_remove_hcd(hcd); - if (oxnas->use_pllb) { - clk_disable_unprepare(oxnas->phyref); - clk_put(oxnas->phyref); - clk_disable_unprepare(oxnas->refsrc); - clk_put(oxnas->refsrc); - } - clk_disable_unprepare(oxnas->clk); - usb_put_hcd(hcd); - - return 0; -} - -static const struct of_device_id oxnas_ehci_dt_ids[] = { - { .compatible = "plxtech,nas782x-ehci" }, - { /* sentinel */ } -}; - -MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids); - -static struct platform_driver ehci_oxnas_driver = { - .probe = ehci_oxnas_drv_probe, - .remove = ehci_oxnas_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver.name = "oxnas-ehci", - .driver.of_match_table = oxnas_ehci_dt_ids, -}; - -static const struct ehci_driver_overrides oxnas_overrides __initconst = { - .reset = ehci_oxnas_reset, - .extra_priv_size = sizeof(struct oxnas_hcd), -}; - -static int __init ehci_oxnas_init(void) -{ - if (usb_disabled()) - return -ENODEV; - - ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides); - return platform_driver_register(&ehci_oxnas_driver); -} -module_init(ehci_oxnas_init); - -static void __exit ehci_oxnas_cleanup(void) -{ - platform_driver_unregister(&ehci_oxnas_driver); -} -module_exit(ehci_oxnas_cleanup); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_ALIAS("platform:oxnas-ehci"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/oxnas/image/Makefile b/target/linux/oxnas/image/Makefile deleted file mode 100644 index abf83caa1a..0000000000 --- a/target/linux/oxnas/image/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux -UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage - -include $(SUBTARGET).mk - -$(eval $(call BuildImage)) diff --git a/target/linux/oxnas/image/ox810se.mk b/target/linux/oxnas/image/ox810se.mk deleted file mode 100644 index 77bdcc7716..0000000000 --- a/target/linux/oxnas/image/ox810se.mk +++ /dev/null @@ -1,20 +0,0 @@ -KERNEL_LOADADDR := 0x48008000 - -define Device/Default - KERNEL_NAME := zImage - KERNEL_SUFFIX := -uImage - KERNEL_INSTALL := 1 - FILESYSTEMS := squashfs ext4 - PROFILES := Default - DEVICE_DTS := ox810se-$(subst _,-,$(1)) - IMAGES := sysupgrade.tar - IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata -endef - -define Device/wd_mbwe - DEVICE_VENDOR := Western Digital - DEVICE_MODEL := My Book - DEVICE_VARIANT := World Edition - KERNEL := kernel-bin | append-dtb | uImage none -endef -TARGET_DEVICES += wd_mbwe diff --git a/target/linux/oxnas/image/ox820.mk b/target/linux/oxnas/image/ox820.mk deleted file mode 100644 index deb49b14c4..0000000000 --- a/target/linux/oxnas/image/ox820.mk +++ /dev/null @@ -1,84 +0,0 @@ -UBIFS_OPTS := -m 2048 -e 126KiB -c 4096 -KERNEL_LOADADDR := 0x60008000 - -define Device/Default - KERNEL_NAME := zImage - KERNEL_SUFFIX := -uImage - KERNEL_INSTALL := 1 - BLOCKSIZE := 128k - PAGESIZE := 2048 - SUBPAGESIZE := 512 - FILESYSTEMS := squashfs ubifs - PROFILES := Default - DEVICE_DTS := ox820-$(subst _,-,$(1)) - KERNEL := kernel-bin | append-dtb | uImage none - IMAGES := ubinized.bin sysupgrade.tar - IMAGE/ubinized.bin := append-ubi - IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata -endef - -define Build/omninas-factory - rm -rf $@.tmp $@.dummy $@.dummy.gz - mkdir -p $@.tmp - $(CP) $@ $@.tmp/uImage - dd if=/dev/zero bs=64k count=4 of=$@.dummy - gzip $@.dummy - mkimage -A arm -T ramdisk -C gzip -n "dummy" \ - -d $@.dummy.gz \ - $@.tmp/rdimg.gz - echo 2.35.20140102 > $@.tmp/version ; echo >> $@.tmp/version - chmod 0744 $@.tmp/* - $(TAR) -C $@.tmp -czvf $@ \ - $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") . -endef - -define Build/encrypt-3des - openssl enc -des3 -a -k $(1) -in $@ -out $@.new && mv $@.new $@ -endef - -define Device/akitio_mycloud - DEVICE_VENDOR := Akitio - DEVICE_MODEL := MyCloud Mini - SUPPORTED_DEVICES += akitio - DEVICE_PACKAGES := kmod-ata-oxnas-sata kmod-i2c-gpio kmod-rtc-ds1307 \ - kmod-usb2-oxnas kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += akitio_mycloud - -define Device/cloudengines_pogoplugpro - DEVICE_VENDOR := Cloud Engines - DEVICE_MODEL := PogoPlug Pro (with mPCIe) - SUPPORTED_DEVICES += pogoplug-pro - DEVICE_PACKAGES := kmod-usb2-oxnas kmod-usb-ledtrig-usbport \ - kmod-ata-oxnas-sata kmod-rt2800-pci wpad-basic-mbedtls -endef -TARGET_DEVICES += cloudengines_pogoplugpro - -define Device/cloudengines_pogoplug-series-3 - DEVICE_VENDOR := Cloud Engines - DEVICE_MODEL := PogoPlug Series V3 (without mPCIe) - SUPPORTED_DEVICES += cloudengines,pogoplugv3 pogoplug-v3 - DEVICE_PACKAGES := kmod-usb2-oxnas kmod-usb-ledtrig-usbport \ - kmod-ata-oxnas-sata -endef -TARGET_DEVICES += cloudengines_pogoplug-series-3 - -define Device/shuttle_kd20 - DEVICE_VENDOR := Shuttle - DEVICE_MODEL := KD20 - SUPPORTED_DEVICES += kd20 - DEVICE_PACKAGES := kmod-usb2-oxnas kmod-usb3 kmod-usb-ledtrig-usbport \ - kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper kmod-hwmon-drivetemp \ - kmod-hwmon-gpiofan kmod-ata-oxnas-sata kmod-md-mod kmod-md-raid0 \ - kmod-md-raid1 kmod-fs-ext4 kmod-fs-xfs -endef -TARGET_DEVICES += shuttle_kd20 - -define Device/mitrastar_stg-212 - DEVICE_VENDOR := MitraStar - DEVICE_MODEL := STG-212 - SUPPORTED_DEVICES += stg212 - DEVICE_PACKAGES := kmod-ata-oxnas-sata kmod-fs-ext4 kmod-fs-xfs \ - kmod-usb2-oxnas kmod-usb-ledtrig-usbport -endef -TARGET_DEVICES += mitrastar_stg-212 diff --git a/target/linux/oxnas/modules.mk b/target/linux/oxnas/modules.mk deleted file mode 100644 index 35d03c5d61..0000000000 --- a/target/linux/oxnas/modules.mk +++ /dev/null @@ -1,29 +0,0 @@ -define KernelPackage/ata-oxnas-sata - TITLE:=oxnas Serial ATA support - KCONFIG:=CONFIG_SATA_OXNAS - FILES:=$(LINUX_DIR)/drivers/ata/sata_oxnas.ko - AUTOLOAD:=$(call AutoLoad,41,sata_oxnas,1) - $(call AddDepends/ata,@TARGET_oxnas) -endef - -define KernelPackage/ata-oxnas-sata/description - SATA support for OX934 core found in the OX8xx/PLX782x SoCs -endef - -$(eval $(call KernelPackage,ata-oxnas-sata)) - - -define KernelPackage/usb2-oxnas - TITLE:=OX820 EHCI driver - KCONFIG:=CONFIG_USB_EHCI_OXNAS - FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko - AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1) - $(call AddDepends/usb,@TARGET_oxnas_ox820 +kmod-usb2) -endef - -define KernelPackage/usb2-oxnas/description - This driver provides USB Device Controller support for the - EHCI USB host built-in to the OX820 SoC. -endef - -$(eval $(call KernelPackage,usb2-oxnas)) diff --git a/target/linux/oxnas/ox810se/config-default b/target/linux/oxnas/ox810se/config-default deleted file mode 100644 index 5d2d49c288..0000000000 --- a/target/linux/oxnas/ox810se/config-default +++ /dev/null @@ -1,8 +0,0 @@ -# CONFIG_CACHE_L2X0 is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -# CONFIG_DEBUG_UNCOMPRESS is not set -CONFIG_EXT4_FS=y -CONFIG_FS_MBCACHE=y -CONFIG_MACH_OX810SE=y diff --git a/target/linux/oxnas/ox810se/profiles/00-default.mk b/target/linux/oxnas/ox810se/profiles/00-default.mk deleted file mode 100644 index 275a9e1fbf..0000000000 --- a/target/linux/oxnas/ox810se/profiles/00-default.mk +++ /dev/null @@ -1,10 +0,0 @@ -define Profile/Default - NAME:=Default Profile - PRIORITY:=1 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef - -$(eval $(call Profile,Default)) diff --git a/target/linux/oxnas/ox810se/target.mk b/target/linux/oxnas/ox810se/target.mk deleted file mode 100644 index 4031fc57c3..0000000000 --- a/target/linux/oxnas/ox810se/target.mk +++ /dev/null @@ -1,9 +0,0 @@ -FEATURES+=source-only - -SUBTARGET:=ox810se -BOARDNAME:=OX810SE -CPU_TYPE:=arm926ej-s - -define Target/Description - Oxford OX810SE -endef diff --git a/target/linux/oxnas/ox820/config-default b/target/linux/oxnas/ox820/config-default deleted file mode 100644 index 8395d75815..0000000000 --- a/target/linux/oxnas/ox820/config-default +++ /dev/null @@ -1,95 +0,0 @@ -CONFIG_ARCH_HAS_TICK_BROADCAST=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_WANT_LIBATA_LEDS=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HEAVY_MB=y -CONFIG_ATA_LEDS=y -CONFIG_CACHE_L2X0=y -# CONFIG_CACHE_L2X0_PMU is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_ABRT_EV6=y -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_PABRT_V6=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_V6K=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_LL_UART_8250=y -# CONFIG_DEBUG_UART_8250 is not set -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=0 -CONFIG_DEBUG_UART_PHYS=0x44200000 -CONFIG_DEBUG_UART_VIRT=0xf4200000 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DMA_CACHE_RWFO=y -CONFIG_FORCE_MAX_ZONEORDER=12 -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_SMP=y -CONFIG_HOTPLUG_CPU=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_MACH_OX820=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_NAND_ECC_SW_BCH is not set -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set -CONFIG_MTD_NAND_OXNAS=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NR_CPUS=16 -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_OXNAS=y -CONFIG_PCIE_PME=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PM_SLEEP_SMP=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_SECURITY=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress-ox820.h" -CONFIG_XPS=y diff --git a/target/linux/oxnas/ox820/profiles/00-default.mk b/target/linux/oxnas/ox820/profiles/00-default.mk deleted file mode 100644 index c785dd29b3..0000000000 --- a/target/linux/oxnas/ox820/profiles/00-default.mk +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Copyright (C) 2016 OpenWrt.org - -define Profile/Default - NAME:=Default Profile - PRIORITY:=1 - PACKAGES:=\ - kmod-i2c-gpio kmod-gpio-beeper kmod-hwmon-gpiofan \ - kmod-rtc-pcf8563 kmod-rtc-ds1307 kmod-usb3 -endef - -define Profile/Default/Description - Default package set compatible with most boards. -endef - -$(eval $(call Profile,Default)) diff --git a/target/linux/oxnas/ox820/target.mk b/target/linux/oxnas/ox820/target.mk deleted file mode 100644 index 6820473039..0000000000 --- a/target/linux/oxnas/ox820/target.mk +++ /dev/null @@ -1,8 +0,0 @@ -SUBTARGET:=ox820 -BOARDNAME:=OX820/NAS782x -CPU_TYPE:=mpcore -FEATURES+=nand pci pcie ubifs usb - -define Target/Description - Oxford/PLXTECH OX820/NAS782x -endef \ No newline at end of file diff --git a/target/linux/oxnas/patches-5.15/010-pogoplug-series-3.patch b/target/linux/oxnas/patches-5.15/010-pogoplug-series-3.patch deleted file mode 100644 index 44102352af..0000000000 --- a/target/linux/oxnas/patches-5.15/010-pogoplug-series-3.patch +++ /dev/null @@ -1,82 +0,0 @@ -- add compatible string -- add console to bootargs -- add led aliases -- adjust nand partition table ---- ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -11,10 +11,10 @@ - / { - model = "Cloud Engines PogoPlug Series 3"; - -- compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; -+ compatible = "cloudengines,pogoplug-series-3", "cloudengines,pogoplugv3", "oxsemi,ox820"; - - chosen { -- bootargs = "earlyprintk"; -+ bootargs = "earlyprintk console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - -@@ -27,24 +27,28 @@ - serial0 = &uart0; - gpio0 = &gpio0; - gpio1 = &gpio1; -+ led-boot = &led_status; -+ led-failsafe = &led_warn; -+ led-running = &led_act; -+ led-upgrade = &led_warn; - }; - - leds { - compatible = "gpio-leds"; - -- blue { -+ led_status: blue { - label = "pogoplug:blue"; - gpios = <&gpio0 2 0>; - default-state = "keep"; - }; - -- orange { -+ led_warn: orange { - label = "pogoplug:orange"; - gpios = <&gpio1 16 1>; - default-state = "keep"; - }; - -- green { -+ led_act: green { - label = "pogoplug:green"; - gpios = <&gpio1 17 1>; - default-state = "keep"; -@@ -73,11 +77,27 @@ - nand-ecc-algo = "hamming"; - - partition@0 { -- label = "boot"; -- reg = <0x00000000 0x00e00000>; -+ label = "stage1"; -+ reg = <0x00000000 0x00040000>; - read-only; - }; - -+ partition@40000 { -+ label = "u-boot"; -+ reg = <0x00040000 0x00380000>; -+ read-only; -+ }; -+ -+ partition@3c0000 { -+ label = "u-boot-env"; -+ reg = <0x003c0000 0x00080000>; -+ }; -+ -+ partition@440000 { -+ label = "kernel"; -+ reg = <0x00440000 0x009c0000>; -+ }; -+ - partition@e00000 { - label = "ubi"; - reg = <0x00e00000 0x07200000>; diff --git a/target/linux/oxnas/patches-5.15/050-ox820-remove-left-overs.patch b/target/linux/oxnas/patches-5.15/050-ox820-remove-left-overs.patch deleted file mode 100644 index e30f328792..0000000000 --- a/target/linux/oxnas/patches-5.15/050-ox820-remove-left-overs.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 552ed4955c1fee1109bf5ba137dc35a411a1448c Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Fri, 1 Jun 2018 02:41:15 +0200 -Subject: [PATCH] arm: ox820: remove left-overs - -Signed-off-by: Daniel Golle ---- - drivers/clk/clk-oxnas.c | 2 -- - include/dt-bindings/clock/oxsemi,ox820.h | 32 +++++++++++------------- - 2 files changed, 14 insertions(+), 20 deletions(-) - ---- a/drivers/clk/clk-oxnas.c -+++ b/drivers/clk/clk-oxnas.c -@@ -29,8 +29,6 @@ struct oxnas_stdclk_data { - struct clk_hw_onecell_data *onecell_data; - struct clk_oxnas_gate **gates; - unsigned int ngates; -- struct clk_oxnas_pll **plls; -- unsigned int nplls; - }; - - /* Regmap offsets */ ---- a/include/dt-bindings/clock/oxsemi,ox820.h -+++ b/include/dt-bindings/clock/oxsemi,ox820.h -@@ -6,24 +6,20 @@ - #ifndef DT_CLOCK_OXSEMI_OX820_H - #define DT_CLOCK_OXSEMI_OX820_H - --/* PLLs */ --#define CLK_820_PLLA 0 --#define CLK_820_PLLB 1 -- - /* Gate Clocks */ --#define CLK_820_LEON 2 --#define CLK_820_DMA_SGDMA 3 --#define CLK_820_CIPHER 4 --#define CLK_820_SD 5 --#define CLK_820_SATA 6 --#define CLK_820_AUDIO 7 --#define CLK_820_USBMPH 8 --#define CLK_820_ETHA 9 --#define CLK_820_PCIEA 10 --#define CLK_820_NAND 11 --#define CLK_820_PCIEB 12 --#define CLK_820_ETHB 13 --#define CLK_820_REF600 14 --#define CLK_820_USBDEV 15 -+#define CLK_820_LEON 0 -+#define CLK_820_DMA_SGDMA 1 -+#define CLK_820_CIPHER 2 -+#define CLK_820_SD 3 -+#define CLK_820_SATA 4 -+#define CLK_820_AUDIO 5 -+#define CLK_820_USBMPH 6 -+#define CLK_820_ETHA 7 -+#define CLK_820_PCIEA 8 -+#define CLK_820_NAND 9 -+#define CLK_820_PCIEB 10 -+#define CLK_820_ETHB 11 -+#define CLK_820_REF600 12 -+#define CLK_820_USBDEV 13 - - #endif /* DT_CLOCK_OXSEMI_OX820_H */ diff --git a/target/linux/oxnas/patches-5.15/100-oxnas-clk-plla-pllb.patch b/target/linux/oxnas/patches-5.15/100-oxnas-clk-plla-pllb.patch deleted file mode 100644 index f609f1b12a..0000000000 --- a/target/linux/oxnas/patches-5.15/100-oxnas-clk-plla-pllb.patch +++ /dev/null @@ -1,273 +0,0 @@ ---- a/drivers/clk/clk-oxnas.c -+++ b/drivers/clk/clk-oxnas.c -@@ -5,19 +5,42 @@ - * Copyright (C) 2016 Neil Armstrong - */ - -+#include -+#include - #include - #include - #include -+#include - #include - #include - #include - #include - #include - #include -+#include - - #include - #include - -+#define REF300_DIV_INT_SHIFT 8 -+#define REF300_DIV_FRAC_SHIFT 0 -+#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) -+#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) -+ -+#define PLLB_BYPASS 1 -+#define PLLB_ENSAT 3 -+#define PLLB_OUTDIV 4 -+#define PLLB_REFDIV 8 -+#define PLLB_DIV_INT_SHIFT 8 -+#define PLLB_DIV_FRAC_SHIFT 0 -+#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) -+#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) -+ -+#define PLLA_REFDIV_MASK 0x3F -+#define PLLA_REFDIV_SHIFT 8 -+#define PLLA_OUTDIV_MASK 0x7 -+#define PLLA_OUTDIV_SHIFT 4 -+ - /* Standard regmap gate clocks */ - struct clk_oxnas_gate { - struct clk_hw hw; -@@ -36,6 +59,135 @@ struct oxnas_stdclk_data { - #define CLK_SET_REGOFFSET 0x2c - #define CLK_CLR_REGOFFSET 0x30 - -+#define PLLA_CTRL0_REGOFFSET 0x1f0 -+#define PLLA_CTRL1_REGOFFSET 0x1f4 -+#define PLLB_CTRL0_REGOFFSET 0x1001f0 -+#define MHZ (1000 * 1000) -+ -+struct clk_oxnas_pll { -+ struct clk_hw hw; -+ struct device_node *devnode; -+ struct reset_control *rstc; -+ struct regmap *syscon; -+}; -+ -+#define to_clk_oxnas_pll(_hw) container_of(_hw, struct clk_oxnas_pll, hw) -+ -+static unsigned long plla_clk_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ struct clk_oxnas_pll *plla = to_clk_oxnas_pll(hw); -+ unsigned long fin = parent_rate; -+ unsigned long refdiv, outdiv; -+ unsigned int pll0, fbdiv; -+ -+ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL0_REGOFFSET, &pll0)); -+ -+ refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK; -+ refdiv += 1; -+ outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK; -+ outdiv += 1; -+ -+ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL1_REGOFFSET, &fbdiv)); -+ /* seems we will not be here when pll is bypassed, so ignore this -+ * case */ -+ -+ return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ; -+} -+ -+static const char *pll_clk_parents[] = { -+ "oscillator", -+}; -+ -+static struct clk_ops plla_ops = { -+ .recalc_rate = plla_clk_recalc_rate, -+}; -+ -+static struct clk_init_data clk_plla_init = { -+ .name = "plla", -+ .ops = &plla_ops, -+ .parent_names = pll_clk_parents, -+ .num_parents = ARRAY_SIZE(pll_clk_parents), -+}; -+ -+static int pllb_clk_is_prepared(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ return !!pllb->rstc; -+} -+ -+static int pllb_clk_prepare(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ pllb->rstc = of_reset_control_get(pllb->devnode, NULL); -+ -+ return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0; -+} -+ -+static void pllb_clk_unprepare(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ BUG_ON(IS_ERR(pllb->rstc)); -+ -+ reset_control_put(pllb->rstc); -+ pllb->rstc = NULL; -+} -+ -+static int pllb_clk_enable(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ BUG_ON(IS_ERR(pllb->rstc)); -+ -+ /* put PLL into bypass */ -+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); -+ wmb(); -+ udelay(10); -+ reset_control_assert(pllb->rstc); -+ udelay(10); -+ /* set PLL B control information */ -+ regmap_write_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, 0xffff, -+ (1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV)); -+ reset_control_deassert(pllb->rstc); -+ udelay(100); -+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), 0); -+ -+ return 0; -+} -+ -+static void pllb_clk_disable(struct clk_hw *hw) -+{ -+ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); -+ -+ BUG_ON(IS_ERR(pllb->rstc)); -+ -+ /* put PLL into bypass */ -+ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); -+ -+ wmb(); -+ udelay(10); -+ -+ reset_control_assert(pllb->rstc); -+} -+ -+static struct clk_ops pllb_ops = { -+ .prepare = pllb_clk_prepare, -+ .unprepare = pllb_clk_unprepare, -+ .is_prepared = pllb_clk_is_prepared, -+ .enable = pllb_clk_enable, -+ .disable = pllb_clk_disable, -+}; -+ -+static struct clk_init_data clk_pllb_init = { -+ .name = "pllb", -+ .ops = &pllb_ops, -+ .parent_names = pll_clk_parents, -+ .num_parents = ARRAY_SIZE(pll_clk_parents), -+}; -+ - static inline struct clk_oxnas_gate *to_clk_oxnas_gate(struct clk_hw *hw) - { - return container_of(hw, struct clk_oxnas_gate, hw); -@@ -251,3 +403,42 @@ static struct platform_driver oxnas_stdc - }, - }; - builtin_platform_driver(oxnas_stdclk_driver); -+ -+void __init oxnas_init_plla(struct device_node *np) -+{ -+ struct clk *clk; -+ struct clk_oxnas_pll *plla; -+ -+ plla = kmalloc(sizeof(*plla), GFP_KERNEL); -+ BUG_ON(!plla); -+ -+ plla->syscon = syscon_node_to_regmap(of_get_parent(np)); -+ plla->hw.init = &clk_plla_init; -+ plla->devnode = np; -+ plla->rstc = NULL; -+ clk = clk_register(NULL, &plla->hw); -+ BUG_ON(IS_ERR(clk)); -+ /* mark it as enabled */ -+ clk_prepare_enable(clk); -+ of_clk_add_provider(np, of_clk_src_simple_get, clk); -+} -+CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla); -+ -+void __init oxnas_init_pllb(struct device_node *np) -+{ -+ struct clk *clk; -+ struct clk_oxnas_pll *pllb; -+ -+ pllb = kmalloc(sizeof(*pllb), GFP_KERNEL); -+ BUG_ON(!pllb); -+ -+ pllb->syscon = syscon_node_to_regmap(of_get_parent(np)); -+ pllb->hw.init = &clk_pllb_init; -+ pllb->devnode = np; -+ pllb->rstc = NULL; -+ -+ clk = clk_register(NULL, &pllb->hw); -+ BUG_ON(IS_ERR(clk)); -+ of_clk_add_provider(np, of_clk_src_simple_get, clk); -+} -+CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb); ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -61,12 +61,6 @@ - clocks = <&osc>; - }; - -- plla: plla { -- compatible = "fixed-clock"; -- #clock-cells = <0>; -- clock-frequency = <850000000>; -- }; -- - armclk: armclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; -@@ -266,6 +260,19 @@ - compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; - #clock-cells = <1>; - }; -+ -+ plla: plla { -+ compatible = "plxtech,nas782x-plla"; -+ #clock-cells = <0>; -+ clocks = <&osc>; -+ }; -+ -+ pllb: pllb { -+ compatible = "plxtech,nas782x-pllb"; -+ #clock-cells = <0>; -+ clocks = <&osc>; -+ resets = <&reset RESET_PLLB>; -+ }; - }; - }; - -@@ -287,6 +294,13 @@ - clocks = <&armclk>; - }; - -+ watchdog@620 { -+ compatible = "mpcore_wdt"; -+ reg = <0x620 0x20>; -+ interrupts = ; -+ clocks = <&armclk>; -+ }; -+ - gic: interrupt-controller@1000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; diff --git a/target/linux/oxnas/patches-5.15/150-oxnas-restart.patch b/target/linux/oxnas/patches-5.15/150-oxnas-restart.patch deleted file mode 100644 index e16d6ee85c..0000000000 --- a/target/linux/oxnas/patches-5.15/150-oxnas-restart.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/power/reset/Kconfig -+++ b/drivers/power/reset/Kconfig -@@ -148,6 +148,12 @@ config POWER_RESET_OXNAS - help - Restart support for OXNAS/PLXTECH OX820 SoC. - -+config POWER_RESET_OXNAS -+ bool "OXNAS SoC restart driver" -+ depends on ARCH_OXNAS -+ help -+ Restart support for OXNAS boards. -+ - config POWER_RESET_PIIX4_POWEROFF - tristate "Intel PIIX4 power-off driver" - depends on PCI ---- a/drivers/power/reset/Makefile -+++ b/drivers/power/reset/Makefile -@@ -19,6 +19,7 @@ obj-$(CONFIG_POWER_RESET_QCOM_PON) += qc - obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o - obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o - obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o -+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o - obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o - obj-$(CONFIG_POWER_RESET_REGULATOR) += regulator-poweroff.o - obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o diff --git a/target/linux/oxnas/patches-5.15/320-oxnas-phy-pcie.patch b/target/linux/oxnas/patches-5.15/320-oxnas-phy-pcie.patch deleted file mode 100644 index 7ee4daf0c5..0000000000 --- a/target/linux/oxnas/patches-5.15/320-oxnas-phy-pcie.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -247,6 +247,15 @@ - }; - }; - -+ pcie_phy: pcie-phy@a00000 { -+ compatible = "oxsemi,ox820-pcie-phy"; -+ reg = <0xa00000 0x10>; -+ #phy-cells = <0>; -+ resets = <&reset RESET_PCIEPHY>; -+ reset-names = "phy"; -+ status = "disabled"; -+ }; -+ - sys: sys-ctrl@e00000 { - compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; - reg = <0xe00000 0x200000>; ---- a/drivers/phy/Kconfig -+++ b/drivers/phy/Kconfig -@@ -35,6 +35,13 @@ config PHY_LPC18XX_USB_OTG - This driver is need for USB0 support on LPC18xx/43xx and takes - care of enabling and clock setup. - -+config PHY_OXNAS -+ tristate "Oxford Semi. OX820 PCI-E PHY support" -+ depends on HAS_IOMEM && OF && (ARM || COMPILE_TEST) -+ select GENERIC_PHY -+ help -+ This option enables support for OXNAS OX820 SoC PCIE PHY. -+ - config PHY_PISTACHIO_USB - tristate "IMG Pistachio USB2.0 PHY driver" - depends on MIPS || COMPILE_TEST ---- a/drivers/phy/Makefile -+++ b/drivers/phy/Makefile -@@ -7,6 +7,7 @@ obj-$(CONFIG_GENERIC_PHY) += phy-core.o - obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o - obj-$(CONFIG_PHY_CAN_TRANSCEIVER) += phy-can-transceiver.o - obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o -+obj-$(CONFIG_PHY_OXNAS) += phy-oxnas-pcie.o - obj-$(CONFIG_PHY_XGENE) += phy-xgene.o - obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o - obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o diff --git a/target/linux/oxnas/patches-5.15/340-oxnas-pcie.patch b/target/linux/oxnas/patches-5.15/340-oxnas-pcie.patch deleted file mode 100644 index 8315acaee9..0000000000 --- a/target/linux/oxnas/patches-5.15/340-oxnas-pcie.patch +++ /dev/null @@ -1,122 +0,0 @@ ---- a/drivers/pci/controller/Kconfig -+++ b/drivers/pci/controller/Kconfig -@@ -312,6 +312,11 @@ config PCIE_HISI_ERR - Say Y here if you want error handling support - for the PCIe controller's errors on HiSilicon HIP SoCs - -+config PCIE_OXNAS -+ bool "PLX Oxnas PCIe controller" -+ depends on ARCH_OXNAS -+ select PCIEPORTBUS -+ - source "drivers/pci/controller/dwc/Kconfig" - source "drivers/pci/controller/mobiveil/Kconfig" - source "drivers/pci/controller/cadence/Kconfig" ---- a/drivers/pci/controller/Makefile -+++ b/drivers/pci/controller/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie - obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o - obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o - obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o -+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o - obj-$(CONFIG_VMD) += vmd.o - obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o - obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -289,7 +289,7 @@ - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; -- ranges = <0 0x47000000 0x1000000>; -+ ranges = <0 0x47000000 0x2000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; -@@ -318,5 +318,86 @@ - <0x100 0x500>; - }; - }; -+ -+ pcie0: pcie@47c00000 { -+ compatible = "plxtech,nas782x-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ /* flag & space bus address host address size */ -+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 -+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 -+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 -+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; -+ -+ bus-range = <0x00 0x7f>; -+ -+ /* cfg inbound translator */ -+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>; -+ -+ phys = <&pcie_phy>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ /* wild card mask, match all bus address & interrupt specifier */ -+ /* format: bus address mask, interrupt specifier mask */ -+ /* each bit 1 means need match, 0 means ignored when match */ -+ interrupt-map-mask = <0 0 0 0>; -+ /* format: a list of: bus address, interrupt specifier, -+ * parent interrupt controller & specifier */ -+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>; -+ gpios = <&gpio1 12 0>; -+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>; -+ clock-names = "pcie", "busclk"; -+ resets = <&reset RESET_PCIEA>; -+ reset-names = "pcie"; -+ -+ plxtech,pcie-hcsl-bit = <2>; -+ plxtech,pcie-ctrl-offset = <0x120>; -+ plxtech,pcie-outbound-offset = <0x138>; -+ status = "disabled"; -+ }; -+ -+ pcie1: pcie@47e00000 { -+ compatible = "plxtech,nas782x-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ /* flag & space bus address host address size */ -+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 -+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 -+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 -+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; -+ -+ bus-range = <0x80 0xff>; -+ -+ /* cfg inbound translator */ -+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>; -+ -+ phys = <&pcie_phy>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ /* wild card mask, match all bus address & interrupt specifier */ -+ /* format: bus address mask, interrupt specifier mask */ -+ /* each bit 1 means need match, 0 means ignored when match */ -+ interrupt-map-mask = <0 0 0 0>; -+ /* format: a list of: bus address, interrupt specifier, -+ * parent interrupt controller & specifier */ -+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>; -+ -+ /* gpios = <&gpio1 12 0>; */ -+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>; -+ clock-names = "pcie", "busclk"; -+ resets = <&reset RESET_PCIEB>; -+ reset-names = "pcie"; -+ -+ plxtech,pcie-hcsl-bit = <3>; -+ plxtech,pcie-ctrl-offset = <0x124>; -+ plxtech,pcie-outbound-offset = <0x174>; -+ status = "disabled"; -+ }; - }; - }; diff --git a/target/linux/oxnas/patches-5.15/500-oxnas-sata.patch b/target/linux/oxnas/patches-5.15/500-oxnas-sata.patch deleted file mode 100644 index d3ec2e2d48..0000000000 --- a/target/linux/oxnas/patches-5.15/500-oxnas-sata.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/drivers/ata/Kconfig -+++ b/drivers/ata/Kconfig -@@ -568,6 +568,14 @@ config SATA_VITESSE - - If unsure, say N. - -+config SATA_OXNAS -+ tristate "PLXTECH NAS782X SATA support" -+ select SATA_HOST -+ help -+ This option enables support for Nas782x Serial ATA controller. -+ -+ If unsure, say N. -+ - comment "PATA SFF controllers with BMDMA" - - config PATA_ALI ---- a/drivers/ata/Makefile -+++ b/drivers/ata/Makefile -@@ -46,6 +46,7 @@ obj-$(CONFIG_SATA_SVW) += sata_svw.o - obj-$(CONFIG_SATA_ULI) += sata_uli.o - obj-$(CONFIG_SATA_VIA) += sata_via.o - obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o -+obj-$(CONFIG_SATA_OXNAS) += sata_oxnas.o - - # SFF PATA w/ BMDMA - obj-$(CONFIG_PATA_ALI) += pata_ali.o ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -399,5 +399,20 @@ - plxtech,pcie-outbound-offset = <0x174>; - status = "disabled"; - }; -+ -+ sata: sata@45900000 { -+ compatible = "plxtech,nas782x-sata"; -+ /* ports dmactl sgdma */ -+ reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>, -+ /* core phy descriptors (optional) */ -+ <0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>; -+ interrupts = ; -+ clocks = <&stdclk CLK_820_SATA>; -+ resets = <&reset RESET_SATA>, <&reset RESET_SATA_LINK>, <&reset RESET_SATA_PHY>; -+ reset-names = "sata", "link", "phy"; -+ nr-ports = <1>; -+ status = "disabled"; -+ }; -+ - }; - }; ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -111,3 +111,7 @@ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etha_mdio>; - }; -+ -+&sata { -+ status = "okay"; -+}; diff --git a/target/linux/oxnas/patches-5.15/510-ox820-libata-leds.patch b/target/linux/oxnas/patches-5.15/510-ox820-libata-leds.patch deleted file mode 100644 index 05ae9ba44b..0000000000 --- a/target/linux/oxnas/patches-5.15/510-ox820-libata-leds.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-oxnas/Kconfig -+++ b/arch/arm/mach-oxnas/Kconfig -@@ -2,6 +2,7 @@ - menuconfig ARCH_OXNAS - bool "Oxford Semiconductor OXNAS Family SoCs" - select ARCH_HAS_RESET_CONTROLLER -+ select ARCH_WANT_LIBATA_LEDS - select COMMON_CLK_OXNAS - select GPIOLIB - select MFD_SYSCON diff --git a/target/linux/oxnas/patches-5.15/800-oxnas-ehci.patch b/target/linux/oxnas/patches-5.15/800-oxnas-ehci.patch deleted file mode 100644 index 23826f5363..0000000000 --- a/target/linux/oxnas/patches-5.15/800-oxnas-ehci.patch +++ /dev/null @@ -1,73 +0,0 @@ ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -339,6 +339,13 @@ config USB_OCTEON_EHCI - USB 2.0 device support. All CN6XXX based chips with USB are - supported. - -+config USB_EHCI_OXNAS -+ tristate "OXNAS EHCI Module" -+ depends on USB_EHCI_HCD && ARCH_OXNAS -+ select USB_EHCI_ROOT_HUB_TT -+ help -+ Enable support for the OX820 SOC's on-chip EHCI controller. -+ - endif # USB_EHCI_HCD - - config USB_OXU210HP_HCD ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -46,6 +46,7 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-s - obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o - obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o - obj-$(CONFIG_USB_EHCI_BRCMSTB) += ehci-brcm.o -+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o - - obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -106,6 +106,31 @@ - status = "disabled"; - }; - -+ ehci: ehci@40200100 { -+ compatible = "plxtech,nas782x-ehci"; -+ reg = <0x40200100 0xf00>; -+ interrupts = ; -+ clocks = <&stdclk CLK_820_USBMPH>, <&pllb>, <&stdclk CLK_820_REF600>; -+ clock-names = "usb", "refsrc", "phyref"; -+ resets = <&reset RESET_USBHS>, <&reset RESET_USBPHYA>, <&reset RESET_USBPHYB>; -+ reset-names = "host", "phya", "phyb"; -+ oxsemi,sys-ctrl = <&sys>; -+ /* Otherwise ref300 is used, which is derived from sata phy -+ * in that case, usb depends on sata initialization */ -+ /* FIXME: how to make this dependency explicit ? */ -+ oxsemi,ehci_use_pllb; -+ status = "disabled"; -+ -+ ehci_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ ehci_port2: port@2 { -+ reg = <2>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+ - apb-bridge@44000000 { - #address-cells = <1>; - #size-cells = <1>; ---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts -@@ -105,6 +105,10 @@ - }; - }; - -+&ehci { -+ status = "okay"; -+}; -+ - ða { - status = "okay"; - diff --git a/target/linux/oxnas/patches-5.15/996-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/oxnas/patches-5.15/996-generic-Mangle-bootloader-s-kernel-arguments.patch deleted file mode 100644 index b3dafd7b0c..0000000000 --- a/target/linux/oxnas/patches-5.15/996-generic-Mangle-bootloader-s-kernel-arguments.patch +++ /dev/null @@ -1,260 +0,0 @@ -From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 -From: Adrian Panella -Date: Thu, 9 Mar 2017 09:37:17 +0100 -Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments - -The command-line arguments provided by the boot loader will be -appended to a new device tree property: bootloader-args. -If there is a property "append-rootblock" in DT under /chosen -and a root= option in bootloaders command line it will be parsed -and added to DT bootargs with the form: XX. -Only command line ATAG will be processed, the rest of the ATAGs -sent by bootloader will be ignored. -This is usefull in dual boot systems, to get the current root partition -without afecting the rest of the system. - -Signed-off-by: Adrian Panella ---- - arch/arm/Kconfig | 11 +++++ - arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- - init/main.c | 16 ++++++++ - 3 files changed, 98 insertions(+), 1 deletion(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1728,6 +1728,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. - -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ bool "Append rootblock parsing bootloader's kernel arguments" -+ help -+ The command-line arguments provided by the boot loader will be -+ appended to a new device tree property: bootloader-args. -+ If there is a property "append-rootblock" in DT under /chosen -+ and a root= option in bootloaders command line it will be parsed -+ and added to DT bootargs with the form: XX. -+ Only command line ATAG will be processed, the rest of the ATAGs -+ sent by bootloader will be ignored. -+ - endchoice - - config CMDLINE ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -5,6 +5,8 @@ - - #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) - #define do_extend_cmdline 1 -+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#define do_extend_cmdline 1 - #else - #define do_extend_cmdline 0 - #endif -@@ -20,6 +22,7 @@ static int node_offset(void *fdt, const - return offset; - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static int setprop(void *fdt, const char *node_path, const char *property, - void *val_array, int size) - { -@@ -28,6 +31,7 @@ static int setprop(void *fdt, const char - return offset; - return fdt_setprop(fdt, offset, property, val_array, size); - } -+#endif - - static int setprop_string(void *fdt, const char *node_path, - const char *property, const char *string) -@@ -38,6 +42,7 @@ static int setprop_string(void *fdt, con - return fdt_setprop_string(fdt, offset, property, string); - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static int setprop_cell(void *fdt, const char *node_path, - const char *property, uint32_t val) - { -@@ -46,6 +51,7 @@ static int setprop_cell(void *fdt, const - return offset; - return fdt_setprop_cell(fdt, offset, property, val); - } -+#endif - - static const void *getprop(const void *fdt, const char *node_path, - const char *property, int *len) -@@ -58,6 +64,7 @@ static const void *getprop(const void *f - return fdt_getprop(fdt, offset, property, len); - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static uint32_t get_cell_size(const void *fdt) - { - int len; -@@ -69,6 +76,61 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+#endif -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ -+static char *append_rootblock(char *dest, const char *str, int len, void *fdt) -+{ -+ const char *ptr, *end; -+ const char *root="root="; -+ int i, l; -+ const char *rootblock; -+ -+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually -+ ptr = str - 1; -+ -+ do { -+ //first find an 'r' at the begining or after a space -+ do { -+ ptr++; -+ ptr = strchr(ptr, 'r'); -+ if(!ptr) return dest; -+ -+ } while (ptr != str && *(ptr-1) != ' '); -+ -+ //then check for the rest -+ for(i = 1; i <= 4; i++) -+ if(*(ptr+i) != *(root+i)) break; -+ -+ } while (i != 5); -+ -+ end = strchr(ptr, ' '); -+ end = end ? (end - 1) : (strchr(ptr, 0) - 1); -+ -+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) -+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); -+ ptr = end + 1; -+ -+ /* if append-rootblock property is set use it to append to command line */ -+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); -+ if(rootblock != NULL) { -+ if(*dest != ' ') { -+ *dest = ' '; -+ dest++; -+ len++; -+ } -+ if (len + l + i <= COMMAND_LINE_SIZE) { -+ memcpy(dest, rootblock, l); -+ dest += l - 1; -+ memcpy(dest, ptr, i); -+ dest += i; -+ } -+ } -+ return dest; -+} -+#endif -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -88,18 +150,28 @@ static void merge_fdt_bootargs(void *fdt - - /* and append the ATAG_CMDLINE */ - if (fdt_cmdline) { -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //save original bootloader args -+ //and append ubi.mtd with root partition number to current cmdline -+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); -+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); -+ -+#else - len = strlen(fdt_cmdline); - if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { - *ptr++ = ' '; - memcpy(ptr, fdt_cmdline, len); - ptr += len; - } -+#endif - } - *ptr = '\0'; - - setprop_string(fdt, "/chosen", "bootargs", cmdline); - } - -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - static void hex_str(char *out, uint32_t value) - { - uint32_t digit; -@@ -117,6 +189,7 @@ static void hex_str(char *out, uint32_t - } - *out = '\0'; - } -+#endif - - /* - * Convert and fold provided ATAGs into the provided FDT. -@@ -131,9 +204,11 @@ int atags_to_fdt(void *atag_list, void * - struct tag *atag = atag_list; - /* In the case of 64 bits memory size, need to reserve 2 cells for - * address and size for each bank */ -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE - __be32 mem_reg_property[2 * 2 * NR_BANKS]; -- int memcount = 0; -- int ret, memsize; -+ int memsize, memcount = 0; -+#endif -+ int ret; - - /* make sure we've got an aligned pointer */ - if ((u32)atag_list & 0x3) -@@ -168,7 +243,9 @@ int atags_to_fdt(void *atag_list, void * - else - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); -- } else if (atag->hdr.tag == ATAG_MEM) { -+ } -+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ else if (atag->hdr.tag == ATAG_MEM) { - if (memcount >= sizeof(mem_reg_property)/4) - continue; - if (!atag->u.mem.size) -@@ -212,6 +289,10 @@ int atags_to_fdt(void *atag_list, void * - setprop(fdt, "/memory", "reg", mem_reg_property, - 4 * memcount * memsize); - } -+#else -+ -+ } -+#endif - - return fdt_pack(fdt); - } ---- a/init/main.c -+++ b/init/main.c -@@ -113,6 +113,10 @@ - - #include - -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+#include -+#endif -+ - static int kernel_init(void *); - - extern void init_IRQ(void); -@@ -993,6 +997,18 @@ asmlinkage __visible void __init __no_sa - page_alloc_init(); - - pr_notice("Kernel command line: %s\n", saved_command_line); -+ -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) -+ //Show bootloader's original command line for reference -+ if(of_chosen) { -+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); -+ if(prop) -+ pr_notice("Bootloader command line (ignored): %s\n", prop); -+ else -+ pr_notice("Bootloader command line not present\n"); -+ } -+#endif -+ - /* parameters may set static keys */ - jump_label_init(); - parse_early_param(); diff --git a/target/linux/oxnas/patches-5.15/999-libata-hacks.patch b/target/linux/oxnas/patches-5.15/999-libata-hacks.patch deleted file mode 100644 index 27074071c2..0000000000 --- a/target/linux/oxnas/patches-5.15/999-libata-hacks.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/drivers/ata/libata-core.c -+++ b/drivers/ata/libata-core.c -@@ -1531,6 +1531,14 @@ unsigned ata_exec_internal_sg(struct ata - return AC_ERR_SYSTEM; - } - -+ if (ap->ops->acquire_hw && !ap->ops->acquire_hw(ap, 0, 0)) { -+ spin_unlock_irqrestore(ap->lock, flags); -+ if (!ap->ops->acquire_hw(ap, 1, (2*HZ))) { -+ return AC_ERR_TIMEOUT; -+ } -+ spin_lock_irqsave(ap->lock, flags); -+ } -+ - /* initialize internal qc */ - qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - -@@ -4587,6 +4595,9 @@ struct ata_queued_cmd *ata_qc_new_init(s - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - -+ if (ap->ops->qc_new && ap->ops->qc_new(ap)) -+ return NULL; -+ - /* libsas case */ - if (ap->flags & ATA_FLAG_SAS_HOST) { - tag = ata_sas_allocate_tag(ap); -@@ -4632,6 +4643,8 @@ void ata_qc_free(struct ata_queued_cmd * - qc->tag = ATA_TAG_POISON; - if (ap->flags & ATA_FLAG_SAS_HOST) - ata_sas_free_tag(tag, ap); -+ if (ap->ops->qc_free) -+ ap->ops->qc_free(qc); - } - } - ---- a/include/linux/libata.h -+++ b/include/linux/libata.h -@@ -927,6 +927,8 @@ struct ata_port_operations { - enum ata_completion_errors (*qc_prep)(struct ata_queued_cmd *qc); - unsigned int (*qc_issue)(struct ata_queued_cmd *qc); - bool (*qc_fill_rtf)(struct ata_queued_cmd *qc); -+ int (*qc_new)(struct ata_port *ap); -+ void (*qc_free)(struct ata_queued_cmd *qc); - - /* - * Configuration and exception handling -@@ -1017,6 +1019,9 @@ struct ata_port_operations { - void (*phy_reset)(struct ata_port *ap); - void (*eng_timeout)(struct ata_port *ap); - -+ int (*acquire_hw)(struct ata_port *ap, int may_sleep, -+ int timeout_jiffies); -+ - /* - * ->inherits must be the last field and all the preceding - * fields must be pointers.