From: John Crispin <john@openwrt.org>
Date: Fri, 1 Jan 2016 21:20:54 +0000 (+0000)
Subject: ramips: Remove LED GPIO definitions in MQmaker WiTi device tree
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6ca6a986226cb1ba5679f3bacc5e60918155a248;p=openwrt%2Fsvn-archive%2Fopenwrt.git

ramips: Remove LED GPIO definitions in MQmaker WiTi device tree

LED's were defined wrong in the device tree file, they are hardware driven because they are connected directly to the switch chip and wireless chips respectively, thus no GPIO addresses are assigned to them. It is safe to remove them from the device tree file to stop confusion.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>

SVN-Revision: 48055
---

diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts
index b046b87ac4..78e2bc9602 100644
--- a/target/linux/ramips/dts/WITI.dts
+++ b/target/linux/ramips/dts/WITI.dts
@@ -104,25 +104,6 @@
 		mtd-mac-address = <&factory 0xe000>;
 	};
 
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "witi:green:power";
-			gpios = <&gpio0 25 1>;
-		};
-
-		sys {
-			label = "witi:green:sys";
-			gpios = <&gpio0 24 1>;
-		};
-
-		internet {
-			label = "witi:green:internet";
-			gpios = <&gpio0 23 1>;
-		};
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;