From: Christian Marangi Date: Wed, 8 Nov 2023 15:48:57 +0000 (+0100) Subject: hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscan X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6c9ac57d58ab0d2c71fb51120a2166b7e0bd7183;p=openwrt%2Fstaging%2Fhauke.git hostapd: permit 40MHz in 802.1s only also for 2.4GHz g/n with noscan Currently for 802.1s only, for wifi 2.4GHz in g/n mode, 40MHz is never permitted. This is probably due to the complexity of setting periodic check for the intolerant bit. When noscan option is set, we ignore the presence of the intoleran bit in near AP, so we can enable 40MHz and ignore any complex logic for checking. Fixes: #13112 Signed-off-by: Christian Marangi --- diff --git a/package/network/services/hostapd/patches/301-mesh-noscan.patch b/package/network/services/hostapd/patches/301-mesh-noscan.patch index c50ffa8490..ceb6d0c161 100644 --- a/package/network/services/hostapd/patches/301-mesh-noscan.patch +++ b/package/network/services/hostapd/patches/301-mesh-noscan.patch @@ -58,6 +58,15 @@ u8 channel; bool is_6ghz; bool dfs_enabled = wpa_s->conf->country[0] && (wpa_s->drv_flags & WPA_DRIVER_FLAGS_RADAR); +@@ -3080,6 +3080,8 @@ void ibss_mesh_setup_freq(struct wpa_sup + freq->he_enabled = ibss_mesh_can_use_he(wpa_s, ssid, mode, + ieee80211_mode); + freq->channel = channel; ++ if (mode->mode == HOSTAPD_MODE_IEEE80211G && ssid->noscan) ++ ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled); + /* Setup higher BW only for 5 GHz */ + if (mode->mode == HOSTAPD_MODE_IEEE80211A) { + ibss_mesh_select_40mhz(wpa_s, ssid, mode, freq, obss_scan, dfs_enabled); --- a/wpa_supplicant/config_ssid.h +++ b/wpa_supplicant/config_ssid.h @@ -1035,6 +1035,8 @@ struct wpa_ssid {