From: Tilman Schmidt Date: Sun, 25 Oct 2009 09:29:37 +0000 (+0000) Subject: gigaset: CAPI module readability improvements X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6c91191668d32ea15e6950de4ee35b6c75cf4da8;p=openwrt%2Fstaging%2Fblogic.git gigaset: CAPI module readability improvements Replace the "ignoring Additional Info" warning message by better readable ones citing the specific subparameters being ignored. Make parts of the code more readable by using a local cmsg pointer variable. Impact: readability improvement Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller --- diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c index c276a925b36f..ac0a2da1eef6 100644 --- a/drivers/isdn/gigaset/capi.c +++ b/drivers/isdn/gigaset/capi.c @@ -168,14 +168,6 @@ static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param, msgname, paramname); } -static inline void ignore_cmstruct_param(struct cardstate *cs, _cmstruct param, - char *msgname, char *paramname) -{ - if (param != CAPI_DEFAULT) - dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n", - msgname, paramname); -} - /* * check for legal hex digit */ @@ -1062,6 +1054,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, struct sk_buff *skb) { struct cardstate *cs = iif->ctr.driverdata; + _cmsg *cmsg = &iif->acmsg; struct sk_buff *cskb; u8 *pparam; unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN; @@ -1069,14 +1062,14 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, static u8 confparam[10]; /* max. 9 octets + length byte */ /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); /* * Facility Request Parameter is not decoded by capi_message2cmsg() * encoding depends on Facility Selector */ - switch (iif->acmsg.FacilitySelector) { + switch (cmsg->FacilitySelector) { case CAPI_FACILITY_DTMF: /* ToDo */ info = CapiFacilityNotSupported; confparam[0] = 2; /* length */ @@ -1093,7 +1086,7 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, case CAPI_FACILITY_SUPPSVC: /* decode Function parameter */ - pparam = iif->acmsg.FacilityRequestParameter; + pparam = cmsg->FacilityRequestParameter; if (pparam == NULL || *pparam < 2) { dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ", "Facility Request Parameter"); @@ -1141,18 +1134,18 @@ static void do_facility_req(struct gigaset_capi_ctr *iif, } /* send FACILITY_CONF with given Info and confirmation parameter */ - capi_cmsg_answer(&iif->acmsg); - iif->acmsg.Info = info; - iif->acmsg.FacilityConfirmationParameter = confparam; + capi_cmsg_answer(cmsg); + cmsg->Info = info; + cmsg->FacilityConfirmationParameter = confparam; msgsize += confparam[0]; /* length */ cskb = alloc_skb(msgsize, GFP_ATOMIC); if (!cskb) { dev_err(cs->dev, "%s: out of memory\n", __func__); return; } - capi_cmsg2message(&iif->acmsg, __skb_put(cskb, msgsize)); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); - capi_ctr_handle_message(&iif->ctr, ap->id, cskb); + capi_cmsg2message(cmsg, __skb_put(cskb, msgsize)); + dump_cmsg(DEBUG_CMD, __func__, cmsg); + capi_ctr_handle_message(&iif->ctr, ap->id, cskb); } @@ -1207,8 +1200,8 @@ static void do_connect_req(struct gigaset_capi_ctr *iif, u16 info; /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); /* get free B channel & construct PLCI */ bcs = gigaset_get_free_channel(cs); @@ -1411,8 +1404,16 @@ static void do_connect_req(struct gigaset_capi_ctr *iif, "CONNECT_REQ", "Calling pty subaddr"); ignore_cstruct_param(cs, cmsg->LLC, "CONNECT_REQ", "LLC"); - ignore_cmstruct_param(cs, cmsg->AdditionalInfo, - "CONNECT_REQ", "Additional Info"); + if (cmsg->AdditionalInfo != CAPI_DEFAULT) { + ignore_cstruct_param(cs, cmsg->BChannelinformation, + "CONNECT_REQ", "B Channel Information"); + ignore_cstruct_param(cs, cmsg->Keypadfacility, + "CONNECT_REQ", "Keypad Facility"); + ignore_cstruct_param(cs, cmsg->Useruserdata, + "CONNECT_REQ", "User-User Data"); + ignore_cstruct_param(cs, cmsg->Facilitydataarray, + "CONNECT_REQ", "Facility Data Array"); + } /* encode parameter: B channel to use */ commands[AT_ISO] = kmalloc(9, GFP_KERNEL); @@ -1458,8 +1459,8 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif, int channel; /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); dev_kfree_skb(skb); /* extract and check channel number from PLCI */ @@ -1524,8 +1525,16 @@ static void do_connect_resp(struct gigaset_capi_ctr *iif, "CONNECT_RESP", "Connected Subaddress"); ignore_cstruct_param(cs, cmsg->LLC, "CONNECT_RESP", "LLC"); - ignore_cmstruct_param(cs, cmsg->AdditionalInfo, - "CONNECT_RESP", "Additional Info"); + if (cmsg->AdditionalInfo != CAPI_DEFAULT) { + ignore_cstruct_param(cs, cmsg->BChannelinformation, + "CONNECT_RESP", "BChannel Information"); + ignore_cstruct_param(cs, cmsg->Keypadfacility, + "CONNECT_RESP", "Keypad Facility"); + ignore_cstruct_param(cs, cmsg->Useruserdata, + "CONNECT_RESP", "User-User Data"); + ignore_cstruct_param(cs, cmsg->Facilitydataarray, + "CONNECT_RESP", "Facility Data Array"); + } /* Accept call */ if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state, @@ -1587,17 +1596,18 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif, struct sk_buff *skb) { struct cardstate *cs = iif->ctr.driverdata; + _cmsg *cmsg = &iif->acmsg; int channel; /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); /* extract and check channel number from PLCI */ - channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff; + channel = (cmsg->adr.adrPLCI >> 8) & 0xff; if (!channel || channel > cs->channels) { dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", - "CONNECT_B3_REQ", "PLCI", iif->acmsg.adr.adrPLCI); + "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI); send_conf(iif, ap, skb, CapiIllContrPlciNcci); return; } @@ -1606,14 +1616,12 @@ static void do_connect_b3_req(struct gigaset_capi_ctr *iif, ap->connected = APCONN_ACTIVE; /* build NCCI: always 1 (one B3 connection only) */ - iif->acmsg.adr.adrNCCI |= 1 << 16; + cmsg->adr.adrNCCI |= 1 << 16; /* NCPI parameter: not applicable for B3 Transparent */ - ignore_cstruct_param(cs, iif->acmsg.NCPI, - "CONNECT_B3_REQ", "NCPI"); - send_conf(iif, ap, skb, - (iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ? - CapiNcpiNotSupportedByProtocol : CapiSuccess); + ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI"); + send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ? + CapiNcpiNotSupportedByProtocol : CapiSuccess); } /* @@ -1628,27 +1636,28 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif, struct sk_buff *skb) { struct cardstate *cs = iif->ctr.driverdata; - struct bc_state *bcs = NULL; + _cmsg *cmsg = &iif->acmsg; + struct bc_state *bcs; int channel; unsigned int msgsize; u8 command; /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); /* extract and check channel number and NCCI */ - channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff; + channel = (cmsg->adr.adrNCCI >> 8) & 0xff; if (!channel || channel > cs->channels || - ((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) { + ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) { dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", - "CONNECT_B3_RESP", "NCCI", iif->acmsg.adr.adrNCCI); + "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI); dev_kfree_skb(skb); return; } bcs = &cs->bcs[channel-1]; - if (iif->acmsg.Reject) { + if (cmsg->Reject) { /* Reject: clear B3 connect received flag */ ap->connected = APCONN_SETUP; @@ -1673,11 +1682,11 @@ static void do_connect_b3_resp(struct gigaset_capi_ctr *iif, command = CAPI_CONNECT_B3_ACTIVE; msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN; } - capi_cmsg_header(&iif->acmsg, ap->id, command, CAPI_IND, - ap->nextMessageNumber++, iif->acmsg.adr.adrNCCI); + capi_cmsg_header(cmsg, ap->id, command, CAPI_IND, + ap->nextMessageNumber++, cmsg->adr.adrNCCI); __skb_trim(skb, msgsize); - capi_cmsg2message(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_cmsg2message(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); capi_ctr_handle_message(&iif->ctr, ap->id, skb); } @@ -1691,28 +1700,37 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif, struct sk_buff *skb) { struct cardstate *cs = iif->ctr.driverdata; + _cmsg *cmsg = &iif->acmsg; struct bc_state *bcs; _cmsg *b3cmsg; struct sk_buff *b3skb; int channel; /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); /* extract and check channel number from PLCI */ - channel = (iif->acmsg.adr.adrPLCI >> 8) & 0xff; + channel = (cmsg->adr.adrPLCI >> 8) & 0xff; if (!channel || channel > cs->channels) { dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", - "DISCONNECT_REQ", "PLCI", iif->acmsg.adr.adrPLCI); + "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI); send_conf(iif, ap, skb, CapiIllContrPlciNcci); return; } bcs = cs->bcs + channel - 1; /* ToDo: process parameter: Additional info */ - ignore_cmstruct_param(cs, iif->acmsg.AdditionalInfo, - "DISCONNECT_REQ", "Additional Info"); + if (cmsg->AdditionalInfo != CAPI_DEFAULT) { + ignore_cstruct_param(cs, cmsg->BChannelinformation, + "DISCONNECT_REQ", "B Channel Information"); + ignore_cstruct_param(cs, cmsg->Keypadfacility, + "DISCONNECT_REQ", "Keypad Facility"); + ignore_cstruct_param(cs, cmsg->Useruserdata, + "DISCONNECT_REQ", "User-User Data"); + ignore_cstruct_param(cs, cmsg->Facilitydataarray, + "DISCONNECT_REQ", "Facility Data Array"); + } /* skip if DISCONNECT_IND already sent */ if (!ap->connected) @@ -1733,7 +1751,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif, } capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, ap->nextMessageNumber++, - iif->acmsg.adr.adrPLCI | (1 << 16)); + cmsg->adr.adrPLCI | (1 << 16)); b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); if (b3skb == NULL) { @@ -1769,18 +1787,19 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif, struct sk_buff *skb) { struct cardstate *cs = iif->ctr.driverdata; + _cmsg *cmsg = &iif->acmsg; int channel; /* decode message */ - capi_message2cmsg(&iif->acmsg, skb->data); - dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg); + capi_message2cmsg(cmsg, skb->data); + dump_cmsg(DEBUG_CMD, __func__, cmsg); /* extract and check channel number and NCCI */ - channel = (iif->acmsg.adr.adrNCCI >> 8) & 0xff; + channel = (cmsg->adr.adrNCCI >> 8) & 0xff; if (!channel || channel > cs->channels || - ((iif->acmsg.adr.adrNCCI >> 16) & 0xffff) != 1) { + ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) { dev_notice(cs->dev, "%s: invalid %s 0x%02x\n", - "DISCONNECT_B3_REQ", "NCCI", iif->acmsg.adr.adrNCCI); + "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI); send_conf(iif, ap, skb, CapiIllContrPlciNcci); return; } @@ -1803,11 +1822,10 @@ static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif, gigaset_schedule_event(cs); /* NCPI parameter: not applicable for B3 Transparent */ - ignore_cstruct_param(cs, iif->acmsg.NCPI, + ignore_cstruct_param(cs, cmsg->NCPI, "DISCONNECT_B3_REQ", "NCPI"); - send_conf(iif, ap, skb, - (iif->acmsg.NCPI && iif->acmsg.NCPI[0]) ? - CapiNcpiNotSupportedByProtocol : CapiSuccess); + send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ? + CapiNcpiNotSupportedByProtocol : CapiSuccess); } /*