From: Daniel Golle Date: Tue, 4 Jan 2022 23:01:53 +0000 (+0000) Subject: kernel: improve driver support for gen-3 Aquantia Ethernet PHYs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6c312d9717e1fd37552a6e840967cb0061f7bc8f;p=openwrt%2Fstaging%2Frobimarko.git kernel: improve driver support for gen-3 Aquantia Ethernet PHYs * correctly set system side interface, the original patch was errornous and there is a follow-up fix for it * enable phy statistics for AQR112(+R/C) and ARQ412 (ethtool --phy-statistics ethX) Tested, including phy-statistics, on - IEI Puzzle M901 (AQR112, AQR112C, AQR112R) - IEI Puzzle M902 (AQR113, AQR112R) - Ubiquiti UniFi 6 LR (AQR112C) Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/hack-5.10/721-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/generic/hack-5.10/721-net-phy-aquantia-enable-AQR112-and-AQR412.patch deleted file mode 100644 index 882f20c6d1..0000000000 --- a/target/linux/generic/hack-5.10/721-net-phy-aquantia-enable-AQR112-and-AQR412.patch +++ /dev/null @@ -1,146 +0,0 @@ -From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001 -From: Alex Marginean -Date: Tue, 27 Aug 2019 15:16:56 +0300 -Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412 - -Adds support for AQR112 and AQR412 which is mostly based on existing code -with the addition of code configuring the protocol on system side. -This allows changing the system side protocol without having to deploy a -different firmware on the PHY. - -Signed-off-by: Alex Marginean ---- - drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 88 insertions(+) - ---- a/drivers/net/phy/aquantia_main.c -+++ b/drivers/net/phy/aquantia_main.c -@@ -20,9 +20,11 @@ - #define PHY_ID_AQR105 0x03a1b4a2 - #define PHY_ID_AQR106 0x03a1b4d0 - #define PHY_ID_AQR107 0x03a1b4e0 -+#define PHY_ID_AQR112 0x03a1b662 - #define PHY_ID_AQR113C 0x31c31c12 - #define PHY_ID_AQCS109 0x03a1b5c2 - #define PHY_ID_AQR405 0x03a1b4b0 -+#define PHY_ID_AQR412 0x03a1b712 - #define PHY_ID_AQR813 0x31c31cb2 - - #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 -@@ -123,6 +125,29 @@ - #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1) - #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0) - -+/* registers in MDIO_MMD_VEND1 region */ -+#define AQUANTIA_VND1_GLOBAL_SC 0x000 -+#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb) -+ -+/* global start rate, the protocol associated with this speed is used by default -+ * on SI. -+ */ -+#define AQUANTIA_VND1_GSTART_RATE 0x31a -+#define AQUANTIA_VND1_GSTART_RATE_OFF 0 -+#define AQUANTIA_VND1_GSTART_RATE_100M 1 -+#define AQUANTIA_VND1_GSTART_RATE_1G 2 -+#define AQUANTIA_VND1_GSTART_RATE_10G 3 -+#define AQUANTIA_VND1_GSTART_RATE_2_5G 4 -+#define AQUANTIA_VND1_GSTART_RATE_5G 5 -+ -+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */ -+#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b -+#define AQUANTIA_VND1_GSYSCFG_100M 0 -+#define AQUANTIA_VND1_GSYSCFG_1G 1 -+#define AQUANTIA_VND1_GSYSCFG_2_5G 2 -+#define AQUANTIA_VND1_GSYSCFG_5G 3 -+#define AQUANTIA_VND1_GSYSCFG_10G 4 -+ - struct aqr107_hw_stat { - const char *name; - int reg; -@@ -243,6 +268,51 @@ static int aqr_config_aneg(struct phy_de - return genphy_c45_check_and_restart_aneg(phydev, changed); - } - -+static struct { -+ u16 syscfg; -+ int cnt; -+ u16 start_rate; -+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = { -+ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G, -+ AQUANTIA_VND1_GSTART_RATE_1G}, -+ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G, -+ AQUANTIA_VND1_GSTART_RATE_2_5G}, -+ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, -+ AQUANTIA_VND1_GSTART_RATE_10G}, -+ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G, -+ AQUANTIA_VND1_GSTART_RATE_10G}, -+}; -+ -+/* Sets up protocol on system side before calling aqr_config_aneg */ -+static int aqr_config_aneg_set_prot(struct phy_device *phydev) -+{ -+ int if_type = phydev->interface; -+ int i; -+ -+ if (!aquantia_syscfg[if_type].cnt) -+ return 0; -+ -+ /* set PHY in low power mode so we can configure protocols */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, -+ AQUANTIA_VND1_GLOBAL_SC_LP); -+ mdelay(10); -+ -+ /* set the default rate to enable the SI link */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, -+ aquantia_syscfg[if_type].start_rate); -+ -+ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, -+ AQUANTIA_VND1_GSYSCFG_BASE + i, -+ aquantia_syscfg[if_type].syscfg); -+ -+ /* wake PHY back up */ -+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0); -+ mdelay(10); -+ -+ return aqr_config_aneg(phydev); -+} -+ - static int aqr_config_intr(struct phy_device *phydev) - { - bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED; -@@ -738,6 +808,22 @@ static struct phy_driver aqr_driver[] = - .get_stats = aqr107_get_stats, - .link_change_notify = aqr107_link_change_notify, - }, -+{ -+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112), -+ .name = "Aquantia AQR112", -+ .config_aneg = aqr_config_aneg_set_prot, -+ .config_intr = aqr_config_intr, -+ .ack_interrupt = aqr_ack_interrupt, -+ .read_status = aqr107_read_status, -+}, -+{ -+ PHY_ID_MATCH_MODEL(PHY_ID_AQR412), -+ .name = "Aquantia AQR412", -+ .config_aneg = aqr_config_aneg_set_prot, -+ .config_intr = aqr_config_intr, -+ .ack_interrupt = aqr_ack_interrupt, -+ .read_status = aqr107_read_status, -+}, - }; - - module_phy_driver(aqr_driver); -@@ -748,9 +834,11 @@ static struct mdio_device_id __maybe_unu - { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, -+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, -+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, - { } - }; diff --git a/target/linux/generic/hack-5.10/722-net-phy-aquantia-Add-AQR113-driver-support.patch b/target/linux/generic/hack-5.10/722-net-phy-aquantia-Add-AQR113-driver-support.patch deleted file mode 100644 index 2b7a38d1c7..0000000000 --- a/target/linux/generic/hack-5.10/722-net-phy-aquantia-Add-AQR113-driver-support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 2e677e4ae8f8330f68013163b060d0fda3a43095 Mon Sep 17 00:00:00 2001 -From: "Langer, Thomas" -Date: Fri, 9 Jul 2021 17:36:46 +0200 -Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support - -Add a new entry for AQR113 PHY_ID ---- - drivers/net/phy/aquantia_main.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/net/phy/aquantia_main.c -+++ b/drivers/net/phy/aquantia_main.c -@@ -21,6 +21,7 @@ - #define PHY_ID_AQR106 0x03a1b4d0 - #define PHY_ID_AQR107 0x03a1b4e0 - #define PHY_ID_AQR112 0x03a1b662 -+#define PHY_ID_AQR113 0x31c31c40 - #define PHY_ID_AQR113C 0x31c31c12 - #define PHY_ID_AQCS109 0x03a1b5c2 - #define PHY_ID_AQR405 0x03a1b4b0 -@@ -817,6 +818,14 @@ static struct phy_driver aqr_driver[] = - .read_status = aqr107_read_status, - }, - { -+ PHY_ID_MATCH_MODEL(PHY_ID_AQR113), -+ .name = "Aquantia AQR113", -+ .config_aneg = aqr_config_aneg, -+ .config_intr = aqr_config_intr, -+ .ack_interrupt = aqr_ack_interrupt, -+ .read_status = aqr107_read_status, -+}, -+{ - PHY_ID_MATCH_MODEL(PHY_ID_AQR412), - .name = "Aquantia AQR412", - .config_aneg = aqr_config_aneg_set_prot, -@@ -835,6 +844,7 @@ static struct mdio_device_id __maybe_unu - { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, -+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, diff --git a/target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch b/target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch new file mode 100644 index 0000000000..e3541400d7 --- /dev/null +++ b/target/linux/generic/hack-5.10/722-net-phy-aquantia-enable-AQR112-and-AQR412.patch @@ -0,0 +1,154 @@ +From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001 +From: Alex Marginean +Date: Tue, 27 Aug 2019 15:16:56 +0300 +Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412 + +Adds support for AQR112 and AQR412 which is mostly based on existing code +with the addition of code configuring the protocol on system side. +This allows changing the system side protocol without having to deploy a +different firmware on the PHY. + +Signed-off-by: Alex Marginean +--- + drivers/net/phy/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 88 insertions(+) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -20,9 +20,11 @@ + #define PHY_ID_AQR105 0x03a1b4a2 + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 ++#define PHY_ID_AQR112 0x03a1b662 + #define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 + #define PHY_ID_AQR405 0x03a1b4b0 ++#define PHY_ID_AQR412 0x03a1b712 + #define PHY_ID_AQR813 0x31c31cb2 + + #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 +@@ -123,6 +125,29 @@ + #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2 BIT(1) + #define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3 BIT(0) + ++/* registers in MDIO_MMD_VEND1 region */ ++#define AQUANTIA_VND1_GLOBAL_SC 0x000 ++#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb) ++ ++/* global start rate, the protocol associated with this speed is used by default ++ * on SI. ++ */ ++#define AQUANTIA_VND1_GSTART_RATE 0x31a ++#define AQUANTIA_VND1_GSTART_RATE_OFF 0 ++#define AQUANTIA_VND1_GSTART_RATE_100M 1 ++#define AQUANTIA_VND1_GSTART_RATE_1G 2 ++#define AQUANTIA_VND1_GSTART_RATE_10G 3 ++#define AQUANTIA_VND1_GSTART_RATE_2_5G 4 ++#define AQUANTIA_VND1_GSTART_RATE_5G 5 ++ ++/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */ ++#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b ++#define AQUANTIA_VND1_GSYSCFG_100M 0 ++#define AQUANTIA_VND1_GSYSCFG_1G 1 ++#define AQUANTIA_VND1_GSYSCFG_2_5G 2 ++#define AQUANTIA_VND1_GSYSCFG_5G 3 ++#define AQUANTIA_VND1_GSYSCFG_10G 4 ++ + struct aqr107_hw_stat { + const char *name; + int reg; +@@ -243,6 +268,51 @@ static int aqr_config_aneg(struct phy_de + return genphy_c45_check_and_restart_aneg(phydev, changed); + } + ++static struct { ++ u16 syscfg; ++ int cnt; ++ u16 start_rate; ++} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = { ++ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G, ++ AQUANTIA_VND1_GSTART_RATE_1G}, ++ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G, ++ AQUANTIA_VND1_GSTART_RATE_2_5G}, ++ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G, ++ AQUANTIA_VND1_GSTART_RATE_10G}, ++ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G, ++ AQUANTIA_VND1_GSTART_RATE_10G}, ++}; ++ ++/* Sets up protocol on system side before calling aqr_config_aneg */ ++static int aqr_config_aneg_set_prot(struct phy_device *phydev) ++{ ++ int if_type = phydev->interface; ++ int i; ++ ++ if (!aquantia_syscfg[if_type].cnt) ++ return 0; ++ ++ /* set PHY in low power mode so we can configure protocols */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, ++ AQUANTIA_VND1_GLOBAL_SC_LP); ++ mdelay(10); ++ ++ /* set the default rate to enable the SI link */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, ++ aquantia_syscfg[if_type].start_rate); ++ ++ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, ++ AQUANTIA_VND1_GSYSCFG_BASE + i, ++ aquantia_syscfg[if_type].syscfg); ++ ++ /* wake PHY back up */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0); ++ mdelay(10); ++ ++ return aqr_config_aneg(phydev); ++} ++ + static int aqr_config_intr(struct phy_device *phydev) + { + bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED; +@@ -738,6 +808,30 @@ static struct phy_driver aqr_driver[] = + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, + }, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112), ++ .name = "Aquantia AQR112", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR412), ++ .name = "Aquantia AQR412", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, + }; + + module_phy_driver(aqr_driver); +@@ -748,9 +842,11 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR105) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, + { } + }; diff --git a/target/linux/generic/hack-5.10/723-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch b/target/linux/generic/hack-5.10/723-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch deleted file mode 100644 index b60d009241..0000000000 --- a/target/linux/generic/hack-5.10/723-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch +++ /dev/null @@ -1,55 +0,0 @@ -From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 23 Dec 2021 14:52:56 +0000 -Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R - -As advised by Ian Chang this PHY is used in Puzzle devices. - -Signed-off-by: Daniel Golle ---- - drivers/net/phy/aquantia_main.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/net/phy/aquantia_main.c -+++ b/drivers/net/phy/aquantia_main.c -@@ -21,6 +21,8 @@ - #define PHY_ID_AQR106 0x03a1b4d0 - #define PHY_ID_AQR107 0x03a1b4e0 - #define PHY_ID_AQR112 0x03a1b662 -+#define PHY_ID_AQR112C 0x03a1b790 -+#define PHY_ID_AQR112R 0x31c31d12 - #define PHY_ID_AQR113 0x31c31c40 - #define PHY_ID_AQR113C 0x31c31c12 - #define PHY_ID_AQCS109 0x03a1b5c2 -@@ -818,6 +820,22 @@ static struct phy_driver aqr_driver[] = - .read_status = aqr107_read_status, - }, - { -+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C), -+ .name = "Aquantia AQR112C", -+ .config_aneg = aqr_config_aneg_set_prot, -+ .config_intr = aqr_config_intr, -+ .ack_interrupt = aqr_ack_interrupt, -+ .read_status = aqr107_read_status, -+}, -+{ -+ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R), -+ .name = "Aquantia AQR112R", -+ .config_aneg = aqr_config_aneg_set_prot, -+ .config_intr = aqr_config_intr, -+ .ack_interrupt = aqr_ack_interrupt, -+ .read_status = aqr107_read_status, -+}, -+{ - PHY_ID_MATCH_MODEL(PHY_ID_AQR113), - .name = "Aquantia AQR113", - .config_aneg = aqr_config_aneg, -@@ -844,6 +862,8 @@ static struct mdio_device_id __maybe_unu - { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, -+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) }, -+ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, - { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, diff --git a/target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch b/target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch new file mode 100644 index 0000000000..9c5df905bb --- /dev/null +++ b/target/linux/generic/hack-5.10/723-net-phy-aquantia-fix-system-side-protocol-mi.patch @@ -0,0 +1,34 @@ +From 5f008cb22f60da4e10375f22266c1a4e20b1252e Mon Sep 17 00:00:00 2001 +From: Alex Marginean +Date: Fri, 20 Sep 2019 18:22:52 +0300 +Subject: [PATCH] drivers: net: phy: aquantia: fix system side protocol + misconfiguration + +Do not set up protocols for speeds that are not supported by FW. Enabling +these protocols leads to link issues on system side. + +Signed-off-by: Alex Marginean +--- + drivers/net/phy/aquantia_main.c | 8 +++++++- + 1 file changed, 7 insertions(+), 1 deletion(-) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -301,10 +301,16 @@ static int aqr_config_aneg_set_prot(stru + phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE, + aquantia_syscfg[if_type].start_rate); + +- for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) ++ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++) { ++ u16 reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ++ AQUANTIA_VND1_GSYSCFG_BASE + i); ++ if (!reg) ++ continue; ++ + phy_write_mmd(phydev, MDIO_MMD_VEND1, + AQUANTIA_VND1_GSYSCFG_BASE + i, + aquantia_syscfg[if_type].syscfg); ++ } + + /* wake PHY back up */ + phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0); diff --git a/target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch b/target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch new file mode 100644 index 0000000000..7a661309f9 --- /dev/null +++ b/target/linux/generic/hack-5.10/724-net-phy-aquantia-Add-AQR113-driver-support.patch @@ -0,0 +1,43 @@ +From 2e677e4ae8f8330f68013163b060d0fda3a43095 Mon Sep 17 00:00:00 2001 +From: "Langer, Thomas" +Date: Fri, 9 Jul 2021 17:36:46 +0200 +Subject: [PATCH] PONRTSYS-8842: aquantia: Add AQR113 driver support + +Add a new entry for AQR113 PHY_ID +--- + drivers/net/phy/aquantia_main.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -21,6 +21,7 @@ + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 + #define PHY_ID_AQR112 0x03a1b662 ++#define PHY_ID_AQR113 0x31c31c40 + #define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 + #define PHY_ID_AQR405 0x03a1b4b0 +@@ -827,6 +828,14 @@ static struct phy_driver aqr_driver[] = + .get_stats = aqr107_get_stats, + }, + { ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR113), ++ .name = "Aquantia AQR113", ++ .config_aneg = aqr_config_aneg, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++}, ++{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR412), + .name = "Aquantia AQR412", + .probe = aqr107_probe, +@@ -849,6 +858,7 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR405) }, diff --git a/target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch b/target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch new file mode 100644 index 0000000000..40ad0ff583 --- /dev/null +++ b/target/linux/generic/hack-5.10/725-net-phy-aquantia-add-PHY_IDs-for-AQR112-variants.patch @@ -0,0 +1,63 @@ +From 3b92ee7b7899b6beffb2b484c58326e36612a873 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Thu, 23 Dec 2021 14:52:56 +0000 +Subject: [PATCH] net: phy: aquantia: add PHY_ID for AQR112R + +As advised by Ian Chang this PHY is used in Puzzle devices. + +Signed-off-by: Daniel Golle +--- + drivers/net/phy/aquantia_main.c | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/drivers/net/phy/aquantia_main.c ++++ b/drivers/net/phy/aquantia_main.c +@@ -21,6 +21,8 @@ + #define PHY_ID_AQR106 0x03a1b4d0 + #define PHY_ID_AQR107 0x03a1b4e0 + #define PHY_ID_AQR112 0x03a1b662 ++#define PHY_ID_AQR112C 0x03a1b790 ++#define PHY_ID_AQR112R 0x31c31d12 + #define PHY_ID_AQR113 0x31c31c40 + #define PHY_ID_AQR113C 0x31c31c12 + #define PHY_ID_AQCS109 0x03a1b5c2 +@@ -828,6 +830,30 @@ static struct phy_driver aqr_driver[] = + .get_stats = aqr107_get_stats, + }, + { ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112C), ++ .name = "Aquantia AQR112C", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, ++{ ++ PHY_ID_MATCH_MODEL(PHY_ID_AQR112R), ++ .name = "Aquantia AQR112R", ++ .probe = aqr107_probe, ++ .config_aneg = aqr_config_aneg_set_prot, ++ .config_intr = aqr_config_intr, ++ .ack_interrupt = aqr_ack_interrupt, ++ .read_status = aqr107_read_status, ++ .get_sset_count = aqr107_get_sset_count, ++ .get_strings = aqr107_get_strings, ++ .get_stats = aqr107_get_stats, ++}, ++{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR113), + .name = "Aquantia AQR113", + .config_aneg = aqr_config_aneg, +@@ -858,6 +884,8 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_MATCH_MODEL(PHY_ID_AQR106) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR107) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR112) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112C) }, ++ { PHY_ID_MATCH_MODEL(PHY_ID_AQR112R) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },