From: Zoltan HERPAI Date: Sun, 13 Aug 2023 00:29:06 +0000 (+0200) Subject: sunxi: add support for Bananapi P2 Zero X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6bf8193b25a147abfe3720104e63af890c1ca2b8;p=openwrt%2Fstaging%2Fsvanheule.git sunxi: add support for Bananapi P2 Zero CPU: Allwinner H2+ quad-core Cortex-A7 @ 1.2GHz Memory: 512Mb DDR3 Storage: SDcard, 8GB eMMC Network: 10/100M ethernet, optional PoE support, Ampak AP6212 wifi + BT USB: 1x USB 2.0 OTG Other: 40-pin expansion header, mini-HDMI Flashing instructions: Standard sunxi SD card installation procedure - copy image to SD card, insert into SD card slot on the device and boot. Signed-off-by: Zoltan HERPAI --- diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index e141eb7af7..17905802c3 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -349,6 +349,13 @@ define U-Boot/bananapi_m2_berry BUILD_DEVICES:=sinovoip_bananapi-m2-berry endef +define U-Boot/bananapi_p2_zero + BUILD_SUBTARGET:=cortexa7 + NAME:=Bananapi P2 Zero + BUILD_DEVICES:=sinovoip_bananapi-p2-zero +endef + + UBOOT_TARGETS := \ a64-olinuxino \ a64-olinuxino-emmc \ @@ -361,6 +368,7 @@ UBOOT_TARGETS := \ bananapi_m2_plus_h3 \ Bananapi \ bananapi_m2_berry \ + bananapi_p2_zero \ Bananapi_M2_Ultra \ Bananapro \ Cubieboard \ diff --git a/package/boot/uboot-sunxi/patches/254-sunxi-h2-add-bpi-p2-zero.patch b/package/boot/uboot-sunxi/patches/254-sunxi-h2-add-bpi-p2-zero.patch new file mode 100644 index 0000000000..9bf1a36b21 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/254-sunxi-h2-add-bpi-p2-zero.patch @@ -0,0 +1,307 @@ +--- /dev/null ++++ b/arch/arm/dts/sun8i-h2-plus-bananapi-p2-zero.dts +@@ -0,0 +1,291 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2023 Zoltan HERPAI ++ * ++ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is: ++ * Copyright (C) 2017 Icenowy Zheng ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "Banana Pi BPI-P2-Zero"; ++ compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus"; ++ ++ aliases { ++ serial0 = &uart0; ++ serial1 = &uart1; ++ ethernet0 = &emac; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ connector { ++ compatible = "hdmi-connector"; ++ type = "c"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr_led { ++ label = "bananapi-p2-zero:red:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ ++ default-state = "on"; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ switch-4 { ++ label = "power"; ++ linux,code = ; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ wakeup-source; ++ }; ++ }; ++ ++ reg_vdd_cpux: vdd-cpux-regulator { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-cpux"; ++ regulator-type = "voltage"; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-ramp-delay = <50>; /* 4ms */ ++ ++ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ ++ enable-active-high; ++ gpios-states = <0x1>; ++ states = <1100000 0>, <1300000 1>; ++ }; ++ ++ reg_vcc_dram: vcc-dram { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-dram"; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-always-on; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ ++ vin-supply = <®_vcc5v0>; ++ }; ++ ++ reg_vcc1v2: vcc1v2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc1v2"; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-always-on; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ ++ vin-supply = <®_vcc5v0>; ++ }; ++ ++ poweroff { ++ compatible = "regulator-poweroff"; ++ cpu-supply = <®_vcc1v2>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ clocks = <&rtc CLK_OSC32K_FANOUT>; ++ clock-names = "ext_clock"; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <®_vdd_cpux>; ++}; ++ ++&de { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&emac { ++ phy-handle = <&int_mii_phy>; ++ phy-mode = "mii"; ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&hdmi { ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ /* ++ * On the production batch of this board the card detect GPIO is ++ * high active (card inserted), although on the early samples it's ++ * low active. ++ */ ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ ++&mmc2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc2_8bit_pins>; ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ bus-width = <8>; ++ non-removable; ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pa_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <1500000>; ++ clocks = <&rtc CLK_OSC32K_FANOUT>; ++ clock-names = "lpo"; ++ vbat-supply = <®_vcc3v3>; ++ vddio-supply = <®_vcc3v3>; ++ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ ++ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ ++ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ }; ++ ++}; ++ ++&pio { ++ gpio-line-names = ++ /* PA */ ++ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", ++ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", ++ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", ++ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", ++ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", ++ "CON2-P40", "CON2-P38", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PB */ ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PC */ ++ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", ++ "CON2-P18", "", "", "CON2-P26", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PD */ ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "CSI-PWR-EN", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PE */ ++ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", ++ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", ++ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", ++ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PF */ ++ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", ++ "SDC0-D2", "SDC0-DET", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PG */ ++ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", ++ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", ++ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", ++ "BT-RST-N", "AP-WAKE-BT", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&r_pio { ++ gpio-line-names = ++ /* PL */ ++ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", ++ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", ++ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&usb_otg { ++ dr_mode = "otg"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ ++ /* ++ * There're two micro-USB connectors, one is power-only and another is ++ * OTG. The Vbus of these two connectors are connected together, so ++ * the external USB device will be powered just by the power input ++ * from the power-only USB port. ++ */ ++ status = "okay"; ++}; +--- /dev/null ++++ b/configs/bananapi_p2_zero_defconfig +@@ -0,0 +1,10 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-p2-zero" ++CONFIG_SPL=y ++CONFIG_MACH_SUN8I_H3=y ++CONFIG_DRAM_CLK=408 ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y diff --git a/target/linux/sunxi/image/cortexa7.mk b/target/linux/sunxi/image/cortexa7.mk index e14db24eb2..3191cec4fd 100644 --- a/target/linux/sunxi/image/cortexa7.mk +++ b/target/linux/sunxi/image/cortexa7.mk @@ -186,6 +186,15 @@ define Device/sinovoip_bananapi-m3 endef TARGET_DEVICES += sinovoip_bananapi-m3 +define Device/sinovoip_bananapi-p2-zero + DEVICE_VENDOR := Sinovoip + DEVICE_MODEL := Banana Pi P2 Zero + DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \ + cypress-firmware-43430-sdio wpad-basic-mbedtls + SOC := sun8i-h2-plus +endef +TARGET_DEVICES += sinovoip_bananapi-p2-zero + define Device/xunlong_orangepi-one DEVICE_VENDOR := Xunlong DEVICE_MODEL := Orange Pi One diff --git a/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch b/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch new file mode 100644 index 0000000000..3bc55b8cfc --- /dev/null +++ b/target/linux/sunxi/patches-6.1/410-sunxi-add-bananapi-p2-zero.patch @@ -0,0 +1,292 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -1348,6 +1348,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a83t-cubietruck-plus.dtb \ + sun8i-a83t-tbs-a711.dtb \ + sun8i-h2-plus-bananapi-m2-zero.dtb \ ++ sun8i-h2-plus-bananapi-p2-zero.dtb \ + sun8i-h2-plus-libretech-all-h3-cc.dtb \ + sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-p2-zero.dts +@@ -0,0 +1,279 @@ ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT) ++/* ++ * Copyright (C) 2023 Zoltan HERPAI ++ * ++ * Based on sun8i-h2-plus-bananapi-m2-zero.dts, which is: ++ * Copyright (C) 2017 Icenowy Zheng ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include ++#include ++ ++/ { ++ model = "Banana Pi BPI-P2-Zero"; ++ compatible = "sinovoip,bpi-p2-zero", "allwinner,sun8i-h2-plus"; ++ ++ aliases { ++ serial0 = &uart0; ++ serial1 = &uart1; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ connector { ++ compatible = "hdmi-connector"; ++ type = "c"; ++ ++ port { ++ hdmi_con_in: endpoint { ++ remote-endpoint = <&hdmi_out_con>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr_led { ++ label = "bananapi-p2-zero:red:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ ++ default-state = "on"; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ ++ sw4 { ++ label = "power"; ++ linux,code = ; ++ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ reg_vdd_cpux: vdd-cpux-regulator { ++ compatible = "regulator-gpio"; ++ regulator-name = "vdd-cpux"; ++ regulator-type = "voltage"; ++ regulator-boot-on; ++ regulator-always-on; ++ regulator-min-microvolt = <1100000>; ++ regulator-max-microvolt = <1300000>; ++ regulator-ramp-delay = <50>; /* 4ms */ ++ ++ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ ++ enable-active-high; ++ gpios-states = <0x1>; ++ states = <1100000 0>, <1300000 1>; ++ }; ++ ++ reg_vcc_dram: vcc-dram { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-dram"; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <1500000>; ++ regulator-always-on; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ ++ vin-supply = <®_vcc5v0>; ++ }; ++ ++ reg_vcc1v2: vcc1v2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc1v2"; ++ regulator-min-microvolt = <1200000>; ++ regulator-max-microvolt = <1200000>; ++ regulator-always-on; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ ++ vin-supply = <®_vcc5v0>; ++ }; ++ ++ poweroff { ++ compatible = "regulator-poweroff"; ++ cpu-supply = <®_vcc1v2>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ ++ clocks = <&rtc 1>; ++ clock-names = "ext_clock"; ++ }; ++}; ++ ++&cpu0 { ++ cpu-supply = <®_vdd_cpux>; ++}; ++ ++&de { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&emac { ++ phy-handle = <&int_mii_phy>; ++ phy-mode = "mii"; ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&hdmi { ++ status = "okay"; ++}; ++ ++&hdmi_out { ++ hdmi_out_con: endpoint { ++ remote-endpoint = <&hdmi_con_in>; ++ }; ++}; ++ ++&mmc0 { ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ /* ++ * On the production batch of this board the card detect GPIO is ++ * high active (card inserted), although on the early samples it's ++ * low active. ++ */ ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ status = "okay"; ++}; ++ ++&mmc1 { ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pa_pins>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ uart-has-rtscts; ++ status = "okay"; ++ ++ bluetooth { ++ compatible = "brcm,bcm43438-bt"; ++ max-speed = <1500000>; ++ clocks = <&rtc 1>; ++ clock-names = "lpo"; ++ vbat-supply = <®_vcc3v3>; ++ vddio-supply = <®_vcc3v3>; ++ device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ ++ host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ ++ shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ ++ }; ++ ++}; ++ ++&pio { ++ gpio-line-names = ++ /* PA */ ++ "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15", ++ "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29", ++ "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05", ++ "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16", ++ "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27", ++ "CON2-P40", "CON2-P38", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PB */ ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PC */ ++ "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24", ++ "CON2-P18", "", "", "CON2-P26", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PD */ ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "CSI-PWR-EN", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PE */ ++ "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07", ++ "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20", ++ "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12", ++ "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PF */ ++ "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3", ++ "SDC0-D2", "SDC0-DET", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ ++ /* PG */ ++ "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1", ++ "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX", ++ "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP", ++ "BT-RST-N", "AP-WAKE-BT", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&r_pio { ++ gpio-line-names = ++ /* PL */ ++ "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36", ++ "VCC-IO-EN", "USB0-ID", "WL-PWR-EN", ++ "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "", ++ "", "", "", "", "", "", "", "", ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&usb_otg { ++ dr_mode = "otg"; ++ status = "okay"; ++}; ++ ++&usbphy { ++ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ ++ /* ++ * There're two micro-USB connectors, one is power-only and another is ++ * OTG. The Vbus of these two connectors are connected together, so ++ * the external USB device will be powered just by the power input ++ * from the power-only USB port. ++ */ ++ status = "okay"; ++};