From: Sieng-Piaw Liew Date: Wed, 9 Aug 2023 05:13:57 +0000 (+0800) Subject: bmips: bcm6328: add Innacomm W3400V6 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6bc26c7d499ba5c261d4b158241d44ffe3c520d9;p=openwrt%2Fstaging%2Frmilecki.git bmips: bcm6328: add Innacomm W3400V6 Innacomm W3400V6 is an xDSL B/G wireless router based on Broadcom BCM6328 SoC. SoC: Broadcom BCM6328 CPU: BMIPS4350 V8.0, 320 MHz, 1 core Flash: SPI-NOR 8MB, MX25L6406E RAM: 64 MB Ethernet: 4x 10/100 Mbps Switch: Integrated Wireless: 802.11b/g, BCM4312 LEDs/Buttons: 9x / 2x Flash instruction, web UI: 1. Set a static IP on your computer compatible with 192.168.1.1, i.e 192.168.1.100. 2. Connect the ethernet cable from your computer to the router. 3. Make sure the router is powered off. 4. Press the reset button, don't release it yet! 5. While pressing reset, power on the router. 6. Wait 10 seconds or more. Note: The power LED is red at first then turns to solid green when ready. 7. Release the reset button. 8. Browse to 192.168.1.1 9. Select .bin file. 10. Upgrade the image. 11. Wait for it to reboot. Signed-off-by: Sieng-Piaw Liew [Fix cfe nvmem-layout and pinctrl_leds indentation] Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network index 391e38c4dcb..104f20ef0e2 100644 --- a/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network +++ b/target/linux/bmips/bcm6328/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ arcadyan,ar7516) ;; comtrend,ar-5381u |\ comtrend,ar-5387un |\ +innacomm,w3400v6 |\ nucom,r5010unv2) ucidef_set_bridge_device switch ucidef_set_interface_lan "lan1 lan2 lan3 lan4" diff --git a/target/linux/bmips/dts/bcm6328-innacomm-w3400v6.dts b/target/linux/bmips/dts/bcm6328-innacomm-w3400v6.dts new file mode 100644 index 00000000000..f2f70fcb177 --- /dev/null +++ b/target/linux/bmips/dts/bcm6328-innacomm-w3400v6.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "bcm6328.dtsi" + +/ { + model = "Innacomm W3400V6"; + compatible = "innacomm,w3400v6", "brcm,bcm6328"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_green; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + }; + + bcm4318-sprom { + compatible = "brcm,bcma-sprom"; + + pci-bus = <1>; + pci-dev = <0>; + + nvmem-cells = <&macaddr_cfe_6a0 1>; + nvmem-cell-names = "mac-address"; + + brcm,sprom = "brcm/bcm4318-sprom.bin"; + }; +}; + +ðernet { + status = "okay"; + + nvmem-cells = <&macaddr_cfe_6a0 0>; + nvmem-cell-names = "mac-address"; +}; + +&hsspi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <16666667>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x000000 0x010000>; + label = "cfe"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_cfe_6a0: macaddr@6a0 { + compatible = "mac-base"; + reg = <0x6a0 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@10000 { + compatible = "brcm,bcm963xx-imagetag"; + reg = <0x010000 0x7e0000>; + label = "firmware"; + }; + + partition@7f0000 { + reg = <0x7f0000 0x010000>; + label = "nvram"; + }; + }; + }; +}; + +&leds { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led@1 { + reg = <1>; + active-low; + label = "green:internet"; + }; + + led@2 { + reg = <2>; + active-low; + label = "red:internet"; + }; + + led@3 { + reg = <3>; + active-low; + label = "green:dsl"; + }; + + led_power_green: led@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + + led_power_red: led@5 { + reg = <5>; + active-low; + label = "red:power"; + panic-indicator; + }; + + led@11 { + reg = <11>; + active-low; + label = "green:wps"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pinctrl { + pinctrl_leds: leds { + function = "led"; + pins = "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio11"; + }; +}; + +&switch0 { + ports { + port@0 { + reg = <0>; + label = "lan4"; + + phy-handle = <&phy1>; + phy-mode = "mii"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + + phy-handle = <&phy2>; + phy-mode = "mii"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + + phy-handle = <&phy3>; + phy-mode = "mii"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + + phy-handle = <&phy4>; + phy-mode = "mii"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/target/linux/bmips/image/bcm6328.mk b/target/linux/bmips/image/bcm6328.mk index fd0cf16dbb0..b28926b1e71 100644 --- a/target/linux/bmips/image/bcm6328.mk +++ b/target/linux/bmips/image/bcm6328.mk @@ -39,6 +39,18 @@ define Device/comtrend_ar-5387un endef TARGET_DEVICES += comtrend_ar-5387un +define Device/innacomm_w3400v6 + $(Device/bcm63xx-cfe) + DEVICE_VENDOR := Innacomm + DEVICE_MODEL := W3400V6 + CHIP_ID := 6328 + CFE_BOARD_ID := 96328ang + FLASH_MB := 8 + DEVICE_PACKAGES += $(B43_PACKAGES) \ + broadcom-4318-sprom kmod-leds-bcm6328 +endef +TARGET_DEVICES += innacomm_w3400v6 + define Device/nucom_r5010unv2 $(Device/bcm63xx-cfe) DEVICE_VENDOR := NuCom