From: Carlo Nel Date: Sun, 26 Aug 2018 19:11:59 +0000 (+0200) Subject: ramips: add support for TP-Link TL-MR3020 v3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6bbb2202551be394fead2efd99eb946f846fc63d;p=openwrt%2Fstaging%2Fansuel.git ramips: add support for TP-Link TL-MR3020 v3 TP-Link TL-MR3020 v3 is a pocket-size router based on MediaTek MT7628N. This PR is based on the work of @meyergru[1], with his permission. Specification: - MediaTek MT7628N/N (575 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz - 1x 10/100 Mbps Ethernet Flash instruction: The only way to flash the image in TL-MR3020 v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-mr3020-v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. [1] https://github.com/meyergru/lede-source/commits/TL-MR3020-V3 Signed-off-by: Carlo Nel --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 8bf7ef3b1e..293e91ea21 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -404,6 +404,11 @@ tplink,tl-wa801nd-v5) ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" ;; +tplink,tl-mr3020-v3) + set_usb_led "$boardname:green:3g" + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" + ;; tplink,tl-mr3420-v5|\ tplink,tl-wr842n-v5) set_usb_led "$boardname:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 6e4575a052..9e9ecbcb51 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -150,6 +150,7 @@ ramips_setup_interfaces() pbr-d1|\ ravpower,wd03|\ tama,w06|\ + tplink,tl-mr3020-v3|\ u25awf-h1|\ wli-tx4-ag300n|\ wmdr-143n|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 68deb672fc..7558b4e316 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -265,6 +265,7 @@ platform_check_image() { tplink,c20-v1|\ tplink,c20-v4|\ tplink,c50-v3|\ + tplink,tl-mr3020-v3|\ tplink,tl-mr3420-v5|\ tplink,tl-wa801nd-v5|\ tplink,tl-wr842n-v5|\ diff --git a/target/linux/ramips/dts/TL-MR3020V3.dts b/target/linux/ramips/dts/TL-MR3020V3.dts new file mode 100644 index 0000000000..5bc1a82cc4 --- /dev/null +++ b/target/linux/ramips/dts/TL-MR3020V3.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-mr3020-v3", "mediatek,mt7628an-soc"; + model = "TP-Link TL-MR3020 v3"; + + aliases { + led-status = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + modec1 { + label = "sw1"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + modec2 { + label = "sw2"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_power: power { + label = "tl-mr3020-v3:green:power"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wan { + label = "tl-mr3020-v3:green:3g"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "tl-mr3020-v3:green:wlan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "tl-mr3020-v3:green:wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "tl-mr3020-v3:green:lan"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7a0000>; + }; + + partition@7c0000 { + label = "config"; + reg = <0x7c0000 0x10000>; + read-only; + }; + + factory: partition@7d0000 { + label = "factory"; + reg = <0x7d0000 0x30000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2s", "refclk", "wdt", "p2led_an", "p1led_an", "p0led_an", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&wmac { + status = "okay"; + mtd-mac-address = <&factory 0xf100>; + mediatek,mtd-eeprom = <&factory 0x20000>; +}; + +ðernet { + mtd-mac-address = <&factory 0xf100>; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 0c657d5a0f..15bc1ee703 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -231,6 +231,20 @@ define Device/tplink_c50-v3 endef TARGET_DEVICES += tplink_c50-v3 +define Device/tplink_tl-mr3020-v3 + $(Device/tplink) + DTS := TL-MR3020V3 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link TL-MR3020 v3 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x30200003 + TPLINK_HWREV := 0x3 + TPLINK_HWREVADD := 0x3 + TPLINK_HVERSION := 3 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += tplink_tl-mr3020-v3 + define Device/tplink_tl-mr3420-v5 $(Device/tplink) DTS := TL-MR3420V5