From: Felix Fietkau <nbd@openwrt.org>
Date: Thu, 25 Aug 2005 12:11:27 +0000 (+0000)
Subject: fix dependency problem
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6b854dd30ac353abef99611052318d4ea74d749e;p=openwrt%2Fstaging%2Fansuel.git

fix dependency problem

SVN-Revision: 1752
---

diff --git a/openwrt/target/linux/package/openwrt/Makefile b/openwrt/target/linux/package/openwrt/Makefile
index 45b33b8869..6fb20d6229 100644
--- a/openwrt/target/linux/package/openwrt/Makefile
+++ b/openwrt/target/linux/package/openwrt/Makefile
@@ -36,12 +36,13 @@ $(IDIR_OPENWRT):
 	$(SED) s,base-files-arch,base-files-$(BOARD),g $(IDIR_OPENWRT)/CONTROL/control
 
 $(IPKG_OPENWRT): $(IDIR_OPENWRT)
-	mkdir -p $(IDIR_OPENWRT)/etc
-	cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
+	mkdir -p $(IDIR_OPENWRT)/etc/init.d
+	[ -f files/network.overrides.$(BOARD) ] && cp files/network.overrides.$(BOARD) $(IDIR_OPENWRT)/etc/network.overrides
+	[ -f files/S05nvram.$(BOARD) ] && install -m0755 files/S05nvram.$(BOARD) $(IDIR_OPENWRT)/etc/init.d/S05nvram
 	$(RSTRIP) $(IDIR_OPENWRT)
 	$(IPKG_BUILD) $(IDIR_OPENWRT) $(PACKAGE_DIR)
 
-install: $(IPKG_OPENWRT)
+install: compile
 	$(IPKG) install $(IPKG_OPENWRT)
 compile: install-dev $(IPKG_OPENWRT)
 install-dev:
diff --git a/openwrt/target/linux/package/openwrt/files/S05nvram.brcm b/openwrt/target/linux/package/openwrt/files/S05nvram.brcm
new file mode 100755
index 0000000000..0d1300b964
--- /dev/null
+++ b/openwrt/target/linux/package/openwrt/files/S05nvram.brcm
@@ -0,0 +1,102 @@
+# NVRAM setup
+#
+# This file handles the NVRAM quirks of various hardware.
+
+. /etc/network.overrides
+alias debug=${DEBUG:-:}
+
+remap () {
+  for type in lan wifi wan pppoe
+  do
+    for s in '' s
+    do
+      eval nvram set ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\" 
+    done
+  done
+}
+
+nvram_default() {
+  [ -z "$(nvram get $1)" ] && nvram set "$1=$2"
+}
+
+# linksys bug; remove when not using static configuration for lan
+nvram set lan_proto="static"
+
+# hacks for wrt54g 1.x hardware
+[  "$(nvram get boardnum)"  = "42" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && {
+  debug "### wrt54g 1.x hack ###"
+  nvram set vlan1hwname="et0"
+  nvram set vlan2hwname="et0"
+  remap eth0 vlan2
+  remap eth1 vlan1
+}
+
+# hacks for asus wl-500g deluxe
+[  "$(nvram get boardtype)" = "bcm95365r" \
+-a "$(nvram get boardnum)" = "45" ] && {
+  debug "### wl-500g deluxe hacks ###"
+  nvram set vlan0hwname="et0"
+  nvram set vlan1hwname="et0"
+  remap eth0.1 vlan0
+  remap eth0 vlan1
+
+  # set up the vlan*ports variables for the asus wl-500g deluxe
+  # if they don't already exist 
+  nvram_default vlan0ports "1 2 3 4 5*"
+  nvram_default vlan1ports "0 5"
+}
+
+# hacks for asus wl-300g
+[ "$(nvram get productid)" = "WL300g" ] && {
+  debug "### wl-300g hacks ###"
+  nvram set lan_ifnames="eth0 eth2"
+  nvram set wan_ifname="none"
+}
+
+# hacks for asus wl-hdd
+[ "$(nvram get productid)" = "WLHDD" ] && {
+  debug "### wl-hdd hacks ###"
+  nvram set lan_ifnames="eth1 eth2"
+  nvram set wan_ifname="none"
+}
+
+# hacks for wap54g hardware
+[  "$(nvram get boardnum)" = "2" \
+-o "$(nvram get boardnum)" = "1024" ] && {
+  debug "### wap54g hack ###"
+  nvram set wan_ifname="none"
+}
+
+# hacks for buffalo wla2-g54l
+[  "$(nvram get boardnum)" = "00" \
+-a "$(nvram get product_name)" = "Product_name" \
+-o "$(nvram get product_name)" = "WLA2-G54L" ] && {
+  debug "### wla2-g54l hacks ###"
+  nvram set wan_ifname="none"
+  nvram set lan_ifnames="vlan0"
+}
+
+# needed at least for wrt54gs v1.1 and wrt54g v2.0, v2.2
+[ \! -z "$(nvram get boardrev)" ] && {
+  nvram set wl0id=0x4320
+}
+
+# defaults
+nvram_default lan_ifname "br0"
+nvram_default lan_ifnames "$FAILSAFE_ifnames"
+
+nvram_default wan_ifname "vlan1"
+nvram_default wan_proto "dhcp"
+
+nvram_default wl0_ssid OpenWrt
+nvram_default wl0_mode ap
+nvram_default wl0_infra 1
+nvram_default wl0_radio 1
+
+[ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && {
+  # if default wifi mac, set two higher than the lan mac
+  nvram set il0macaddr=$(nvram get et0macaddr|
+  awk '{OFS=FS=":";for(x=7,y=2;--x;){$x=sprintf("%02x",(y+="0x"$x)%256);y/=256}print}')
+}
+
diff --git a/openwrt/target/linux/package/openwrt/files/network.overrides.brcm b/openwrt/target/linux/package/openwrt/files/network.overrides.brcm
index 9766108a96..66f1abd248 100644
--- a/openwrt/target/linux/package/openwrt/files/network.overrides.brcm
+++ b/openwrt/target/linux/package/openwrt/files/network.overrides.brcm
@@ -6,82 +6,23 @@
 # Load sysconf defaults
 [ -f /etc/sysconf ] && . /etc/sysconf
 
-# linksys bug; remove when not using static configuration for lan
-lan_proto="static"
-
-remap () {
-  for type in lan wifi wan pppoe
-  do
-    for s in '' s
-    do
-      eval ${type}_ifname$s=\"$(nvram get ${type}_ifname$s|sed s/$1/$2/g)\" 
-    done
-  done
-}
-
 # hacks for wrt54g 1.x hardware
 [  "$(nvram get boardnum)"  = "42" \
--a "$(nvram get boardtype)" = "bcm94710dev" ] && {
-  debug "### wrt54g 1.x hack ###"
-  vlan1hwname="et0"
-  vlan2hwname="et0"
-  FAILSAFE_ifnames="vlan1 vlan2 eth2"
-  remap eth0 vlan2
-  remap eth1 vlan1
-}
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="vlan1 vlan2 eth2"
 
 # hacks for asus wl-500g deluxe
 [  "$(nvram get boardtype)" = "bcm95365r" \
--a "$(nvram get boardnum)" = "45" ] && {
-  debug "### wl-500g deluxe hacks ###"
-  vlan0hwname="et0"
-  vlan1hwname="et0"
-  FAILSAFE_ifnames="vlan0 eth1"
-  remap eth0.1 vlan0
-  remap eth0 vlan1
-}
-
-# hacks for asus wl-300g
-[ "$(nvram get productid)" = "WL300g" ] && {
-  debug "### wl-300g hacks ###"
-  lan_ifnames="eth0 eth2"
-  wan_ifname="none"
-}
+-a "$(nvram get boardnum)" = "45" ] && FAILSAFE_ifnames="vlan0 eth1"
 
 # hacks for wap54g hardware
 [  "$(nvram get boardnum)" = "2" \
--o "$(nvram get boardnum)" = "1024" ] && {
-  debug "### wap54g hack ###"
-  wan_ifname="none"
-  FAILSAFE_ifnames="eth0 eth1"
-}
-
-# hacks for buffalo wla2-g54l
-[  "$(nvram get boardnum)" = "00" \
--a "$(nvram get product_name)" = "Product_name" \
--o "$(nvram get product_name)" = "WLA2-G54L" ] && {
-  debug "### wla2-g54l hacks ###"
-  wan_ifname="none"
-  lan_ifnames="vlan0"
-}
+-o "$(nvram get boardnum)" = "1024" ] && FAILSAFE_ifnames="eth0 eth1"
 
 # hack for asus wl-500g hardware
-[  "$(nvram get boardnum)"  = "asusX" \
--a "$(nvram get boardtype)"  = "bcm94710dev" ] && {
-  FAILSAFE_ifnames="eth0 eth2"
-}
-
-# defaults if lan_ifname is missing
-[ -z "$(nvram get lan_ifname)" ] && {
-  lan_ifname="br0"
-  lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan2 eth1 eth2 eth3"}
-}
-
-# defaults if wan_ifname is missing
-[ -z "$(nvram get wan_ifname)" ] && {
-   wan_ifname="vlan1"
-   wan_proto="dhcp"
-}
+[ "$(nvram get boardnum)" = "asusX" \
+-a "$(nvram get boardtype)" = "bcm94710dev" ] && FAILSAFE_ifnames="eth0 eth1 eth2"
+  
+FAILSAFE_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
 
 DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
 DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
@@ -90,11 +31,11 @@ DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
 # failsafe if reset is held
 [ "$FAILSAFE" = "true" ] && {
   echo "### YOU ARE IN FAILSAFE MODE ####"
-  lan_ifname="br0"
-  lan_ifnames=${FAILSAFE_ifnames:-"vlan0 vlan1 eth1 eth2 eth3"}
-  lan_ipaddr=$DEFAULT_lan_ipaddr
-  lan_netmask=$DEFAULT_lan_netmask
-  lan_hwaddr=$DEFAULT_lan_hwaddr
-  wan_ifname="none"
-  wifi_ifname="none"
+  NVRAM_lan_ifname="br0"
+  NVRAM_lan_ifnames=$FAILSAFE_ifnames
+  NVRAM_lan_ipaddr=DEFAULT_lan_ipaddr
+  NVRAM_lan_netmask=DEFAULT_lan_netmask
+  NVRAM_lan_hwaddr=DEFAULT_lan_hwaddr
+  NVRAM_wan_ifname="none"
+  NVRAM_wifi_ifname="none"
 }