From: Bin We Date: Thu, 22 Sep 2022 17:04:01 +0000 (+0800) Subject: ramips: add support for OrayBox X1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6b66666da46dd50d4bd2cb1b94fd35ec7f10e54c;p=openwrt%2Fstaging%2Fthess.git ramips: add support for OrayBox X1 Add support for OrayBox X1. It is a 802.11n router, based on MediaTek MT7628N. Specifications: SoC: MediaTek MT7628N (580MHz) RAM: 64 MiB Flash: 16 MiB NOR (Winbond W25Q128JVSIQ) Wireless: 802.11b/g/n 2x2 2.4GHz (Built In) Ethernet: 1x 100Mbps only USB: 1x USB Type-A 2.0 Host Port Button: 1x "Reset" button LED: 1x Blue LED + 1x Red LED + 1x White LED Power: 5V Micro-USB input Manufacturer Page: https://pgy.oray.com/router/x1.html/parameter Flash Layout: 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "kpanic" 0x000000040000-0x000000050000 : "factory" 0x000000050000-0x000000fe0000 : "firmware" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "reserve" Install via SSH: Original firmware is based on OpenWRT, but SSH is not start by default, You should enable it first 1. Login into web admin (10.168.1.1), default password is 'admin' 2. Open the following link, and the result should be {"code":0}; SSH is now started, username is root, password is same as web admin password http://10.168.1.1/cgi-bin/oraybox?_api=ssh_set&enabled=1 4. You can flash firmware via mtd: mtd write /tmp/firmware_image.bin firmware Signed-off-by: Bin We --- diff --git a/target/linux/ramips/dts/mt7628an_oraybox_x1.dts b/target/linux/ramips/dts/mt7628an_oraybox_x1.dts new file mode 100644 index 0000000000..eb9a20aae0 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_oraybox_x1.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mt7628an.dtsi" + +#include +#include + +/ { + compatible = "oraybox,x1", "mediatek,mt7628an-soc"; + model = "OrayBox X1"; + + aliases { + led-boot = &led_status_white; + led-failsafe = &led_status_red; + led-running = &led_status_white; + led-upgrade = &led_status_red; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: status-blue { + label = "blue:status"; + gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + led_status_red: status-red { + label = "red:status"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + led_status_white: status-white { + label = "white:status"; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "kpanic"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xf00000>; + }; + + bdinfo: partition@fe0000 { + label = "bdinfo"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "reserve"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "wdt"; + function = "gpio"; + }; +}; + +ðernet { + nvmem-cells = <&macaddr_bdinfo_9>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; +}; + +&bdinfo { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_9: macaddr@9 { + reg = <0x9 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 296b80d03f..fd16606f3f 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -474,6 +474,14 @@ define Device/onion_omega2p endef TARGET_DEVICES += onion_omega2p +define Device/oraybox_x1 + IMAGE_SIZE := 15360k + DEVICE_VENDOR := OrayBox + DEVICE_MODEL := X1 + DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci +endef +TARGET_DEVICES += oraybox_x1 + define Device/rakwireless_rak633 IMAGE_SIZE := 7872k DEVICE_VENDOR := Rakwireless diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index d972762dad..792bd13ebc 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -59,6 +59,9 @@ keenetic,kn-1613) mediatek,linkit-smart-7688) ucidef_set_led_wlan "wifi" "wifi" "orange:wifi" "phy0tpt" ;; +oraybox,x1) + ucidef_set_led_netdev "wifi" "wifi" "blue:status" "wlan0" + ;; rakwireless,rak633) ucidef_set_led_netdev "wifi_led" "wifi" "blue:wifi" "wlan0" ;; diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index bfd11fda2e..6bcdea971b 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -141,6 +141,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "6@eth0" ;; + oraybox,x1) + ucidef_add_switch "switch0" \ + "3:lan" "6@eth0" + ;; rakwireless,rak633) ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"