From: Daniel Golle Date: Fri, 1 Oct 2021 22:24:06 +0000 (+0100) Subject: mediatek: remove files and patches for Linux 5.4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6b434d3c44aced4c210b042a8791f8d14c407a49;p=openwrt%2Fstaging%2Fjow.git mediatek: remove files and patches for Linux 5.4 All subtargets only provide files and patches for Linux 5.10 by now so there is little use for the old Linux 5.4 stuff. Remove it. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/files-5.4/drivers/leds/leds-ubnt-ledbar.c b/target/linux/mediatek/files-5.4/drivers/leds/leds-ubnt-ledbar.c deleted file mode 100644 index 1f50038b8c..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/leds/leds-ubnt-ledbar.c +++ /dev/null @@ -1,210 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/** - * Driver for the Ubiquiti RGB LED controller (LEDBAR). - * This Controller is based on a Holtek HT32F52241 and connected - * via I2C. - * - * - The Controller needs an enable signal set to high when - * performing a transaction. On the U6-LR, this is located - * at Pin 18 (R6902) - * - * - The Pin is also printed when calling the "usetled" function - * contained in the ubntapp bootloader application. - */ - -#define UBNT_LEDBAR_MAX_BRIGHTNESS 0xff - -#define UBNT_LEDBAR_TRANSACTION_LENGTH 8 -#define UBNT_LEDBAR_TRANSACTION_SUCCESS 0xaa - -#define UBNT_LEDBAR_TRANSACTION_BLUE_IDX 2 -#define UBNT_LEDBAR_TRANSACTION_GREEN_IDX 3 -#define UBNT_LEDBAR_TRANSACTION_RED_IDX 4 - -struct ubnt_ledbar { - struct mutex lock; - struct i2c_client *client; - struct led_classdev led_red; - struct led_classdev led_green; - struct led_classdev led_blue; - struct gpio_desc *enable_gpio; -}; - -static int ubnt_ledbar_perform_transaction(struct ubnt_ledbar *ledbar, - char *transaction) -{ - int ret; - int i; - - for (i = 0; i < UBNT_LEDBAR_TRANSACTION_LENGTH; i++) - i2c_smbus_write_byte(ledbar->client, transaction[i]); - - return i2c_smbus_read_byte(ledbar->client); -} - -static int ubnt_ledbar_apply_state(struct ubnt_ledbar *ledbar) -{ - char setup_msg[UBNT_LEDBAR_TRANSACTION_LENGTH] = {0x40, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x11}; - char led_msg[UBNT_LEDBAR_TRANSACTION_LENGTH] = {0x40, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x01, 0x00}; - char i2c_response; - int ret = 0; - - mutex_lock(&ledbar->lock); - - led_msg[UBNT_LEDBAR_TRANSACTION_BLUE_IDX] = ledbar->led_blue.brightness; - led_msg[UBNT_LEDBAR_TRANSACTION_GREEN_IDX] = ledbar->led_green.brightness; - led_msg[UBNT_LEDBAR_TRANSACTION_RED_IDX] = ledbar->led_red.brightness; - - gpiod_set_raw_value(ledbar->enable_gpio, 1); - - msleep(10); - - i2c_response = ubnt_ledbar_perform_transaction(ledbar, setup_msg); - if (i2c_response != UBNT_LEDBAR_TRANSACTION_SUCCESS) { - dev_err(&ledbar->client->dev, "Error initializing LED transaction: %02x\n", ret); - ret = -EINVAL; - goto out_gpio; - } - - i2c_response = ubnt_ledbar_perform_transaction(ledbar, led_msg); - if (i2c_response != UBNT_LEDBAR_TRANSACTION_SUCCESS) { - dev_err(&ledbar->client->dev, "Failed LED transaction: %02x\n", ret); - ret = -EINVAL; - goto out_gpio; - } - - msleep(10); -out_gpio: - gpiod_set_raw_value(ledbar->enable_gpio, 0); - - mutex_unlock(&ledbar->lock); - - return ret; -} - -#define UBNT_LEDBAR_CONTROL_RGBS(name) \ -static int ubnt_ledbar_set_##name##_brightness(struct led_classdev *led_cdev,\ - enum led_brightness value) \ -{ \ - struct ubnt_ledbar *ledbar = \ - container_of(led_cdev, struct ubnt_ledbar, led_##name); \ - int ret; \ - led_cdev->brightness = value; \ - ret = ubnt_ledbar_apply_state(ledbar); \ - return ret; \ -} - -UBNT_LEDBAR_CONTROL_RGBS(red); -UBNT_LEDBAR_CONTROL_RGBS(green); -UBNT_LEDBAR_CONTROL_RGBS(blue); - - -static int ubnt_ledbar_init_led(struct device_node *np, struct ubnt_ledbar *ledbar, - struct led_classdev *led_cdev) -{ - struct led_init_data init_data = {}; - int ret; - - if (!np) - return 0; - - init_data.fwnode = of_fwnode_handle(np); - - led_cdev->max_brightness = UBNT_LEDBAR_MAX_BRIGHTNESS; - - ret = devm_led_classdev_register_ext(&ledbar->client->dev, led_cdev, - &init_data); - if (ret) - dev_err(&ledbar->client->dev, "led register err: %d\n", ret); - - return ret; -} - - -static int ubnt_ledbar_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct device_node *np = client->dev.of_node; - struct ubnt_ledbar *ledbar; - int ret; - - ledbar = devm_kzalloc(&client->dev, sizeof(*ledbar), GFP_KERNEL); - if (!ledbar) - return -ENOMEM; - - ledbar->enable_gpio = devm_gpiod_get(&client->dev, "enable", GPIOD_OUT_LOW); - - if (IS_ERR(ledbar->enable_gpio)) { - ret = PTR_ERR(ledbar->enable_gpio); - dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret); - return ret; - } - - gpiod_direction_output(ledbar->enable_gpio, 0); - - ledbar->client = client; - - mutex_init(&ledbar->lock); - - i2c_set_clientdata(client, ledbar); - - ledbar->led_red.brightness_set_blocking = ubnt_ledbar_set_red_brightness; - ubnt_ledbar_init_led(of_get_child_by_name(np, "red"), ledbar, &ledbar->led_red); - - ledbar->led_green.brightness_set_blocking = ubnt_ledbar_set_green_brightness; - ubnt_ledbar_init_led(of_get_child_by_name(np, "green"), ledbar, &ledbar->led_green); - - ledbar->led_blue.brightness_set_blocking = ubnt_ledbar_set_blue_brightness; - ubnt_ledbar_init_led(of_get_child_by_name(np, "blue"), ledbar, &ledbar->led_blue); - - return ubnt_ledbar_apply_state(ledbar); -} - -static int ubnt_ledbar_remove(struct i2c_client *client) -{ - struct ubnt_ledbar *ledbar = i2c_get_clientdata(client); - - mutex_destroy(&ledbar->lock); - - return 0; -} - -static const struct i2c_device_id ubnt_ledbar_id[] = { - { "ubnt-ledbar", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, ubnt_ledbar_id); - -static const struct of_device_id of_ubnt_ledbar_match[] = { - { .compatible = "ubnt,ledbar", }, - {}, -}; -MODULE_DEVICE_TABLE(of, of_ubnt_ledbar_match); - -static struct i2c_driver ubnt_ledbar_driver = { - .driver = { - .name = "ubnt-ledbar", - .of_match_table = of_ubnt_ledbar_match, - }, - .probe = ubnt_ledbar_probe, - .remove = ubnt_ledbar_remove, - .id_table = ubnt_ledbar_id, -}; -module_i2c_driver(ubnt_ledbar_driver); - -MODULE_DESCRIPTION("Ubiquiti LEDBAR driver"); -MODULE_AUTHOR("David Bauer "); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/Kconfig b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/Kconfig deleted file mode 100644 index d9e0230cf0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/Kconfig +++ /dev/null @@ -1,3 +0,0 @@ - -config MT753X_GSW - tristate "Driver for the MediaTek MT753x switch" diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/Makefile b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/Makefile deleted file mode 100644 index 7aae451cd1..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# Makefile for MediaTek MT753x gigabit switch -# - -obj-$(CONFIG_MT753X_GSW) += mt753x.o - -mt753x-$(CONFIG_SWCONFIG) += mt753x_swconfig.o - -mt753x-y += mt753x_mdio.o mt7530.o mt7531.o \ - mt753x_common.o mt753x_vlan.o \ - mt753x_nl.o diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7530.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7530.c deleted file mode 100644 index 6a94d0d2f4..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7530.c +++ /dev/null @@ -1,631 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#include -#include - -#include "mt753x.h" -#include "mt753x_regs.h" - -/* MT7530 registers */ - -/* Unique fields of PMCR for MT7530 */ -#define FORCE_MODE BIT(15) - -/* Unique fields of GMACCR for MT7530 */ -#define VLAN_SUPT_NO_S 14 -#define VLAN_SUPT_NO_M 0x1c000 -#define LATE_COL_DROP BIT(13) - -/* Unique fields of (M)HWSTRAP for MT7530 */ -#define BOND_OPTION BIT(24) -#define P5_PHY0_SEL BIT(20) -#define CHG_TRAP BIT(16) -#define LOOPDET_DIS BIT(14) -#define P5_INTF_SEL_GMAC5 BIT(13) -#define SMI_ADDR_S 11 -#define SMI_ADDR_M 0x1800 -#define XTAL_FSEL_S 9 -#define XTAL_FSEL_M 0x600 -#define P6_INTF_DIS BIT(8) -#define P5_INTF_MODE_RGMII BIT(7) -#define P5_INTF_DIS_S BIT(6) -#define C_MDIO_BPS_S BIT(5) -#define EEPROM_EN_S BIT(4) - -/* PHY EEE Register bitmap of define */ -#define PHY_DEV07 0x07 -#define PHY_DEV07_REG_03C 0x3c - -/* PHY Extend Register 0x14 bitmap of define */ -#define PHY_EXT_REG_14 0x14 - -/* Fields of PHY_EXT_REG_14 */ -#define PHY_EN_DOWN_SHFIT BIT(4) - -/* PHY Token Ring Register 0x10 bitmap of define */ -#define PHY_TR_REG_10 0x10 - -/* PHY Token Ring Register 0x12 bitmap of define */ -#define PHY_TR_REG_12 0x12 - -/* PHY LPI PCS/DSP Control Register bitmap of define */ -#define PHY_LPI_REG_11 0x11 - -/* PHY DEV 0x1e Register bitmap of define */ -#define PHY_DEV1E 0x1e -#define PHY_DEV1E_REG_123 0x123 -#define PHY_DEV1E_REG_A6 0xa6 - -/* Values of XTAL_FSEL */ -#define XTAL_20MHZ 1 -#define XTAL_40MHZ 2 -#define XTAL_25MHZ 3 - -#define P6ECR 0x7830 -#define P6_INTF_MODE_TRGMII BIT(0) - -#define TRGMII_TXCTRL 0x7a40 -#define TRAIN_TXEN BIT(31) -#define TXC_INV BIT(30) -#define TX_DOEO BIT(29) -#define TX_RST BIT(28) - -#define TRGMII_TD0_CTRL 0x7a50 -#define TRGMII_TD1_CTRL 0x7a58 -#define TRGMII_TD2_CTRL 0x7a60 -#define TRGMII_TD3_CTRL 0x7a68 -#define TRGMII_TXCTL_CTRL 0x7a70 -#define TRGMII_TCK_CTRL 0x7a78 -#define TRGMII_TD_CTRL(n) (0x7a50 + (n) * 8) -#define NUM_TRGMII_CTRL 6 -#define TX_DMPEDRV BIT(31) -#define TX_DM_SR BIT(15) -#define TX_DMERODT BIT(14) -#define TX_DMOECTL BIT(13) -#define TX_TAP_S 8 -#define TX_TAP_M 0xf00 -#define TX_TRAIN_WD_S 0 -#define TX_TRAIN_WD_M 0xff - -#define TRGMII_TD0_ODT 0x7a54 -#define TRGMII_TD1_ODT 0x7a5c -#define TRGMII_TD2_ODT 0x7a64 -#define TRGMII_TD3_ODT 0x7a6c -#define TRGMII_TXCTL_ODT 0x7574 -#define TRGMII_TCK_ODT 0x757c -#define TRGMII_TD_ODT(n) (0x7a54 + (n) * 8) -#define NUM_TRGMII_ODT 6 -#define TX_DM_DRVN_PRE_S 30 -#define TX_DM_DRVN_PRE_M 0xc0000000 -#define TX_DM_DRVP_PRE_S 28 -#define TX_DM_DRVP_PRE_M 0x30000000 -#define TX_DM_TDSEL_S 24 -#define TX_DM_TDSEL_M 0xf000000 -#define TX_ODTEN BIT(23) -#define TX_DME_PRE BIT(20) -#define TX_DM_DRVNT0 BIT(19) -#define TX_DM_DRVPT0 BIT(18) -#define TX_DM_DRVNTE BIT(17) -#define TX_DM_DRVPTE BIT(16) -#define TX_DM_ODTN_S 12 -#define TX_DM_ODTN_M 0x7000 -#define TX_DM_ODTP_S 8 -#define TX_DM_ODTP_M 0x700 -#define TX_DM_DRVN_S 4 -#define TX_DM_DRVN_M 0xf0 -#define TX_DM_DRVP_S 0 -#define TX_DM_DRVP_M 0x0f - -#define P5RGMIIRXCR 0x7b00 -#define CSR_RGMII_RCTL_CFG_S 24 -#define CSR_RGMII_RCTL_CFG_M 0x7000000 -#define CSR_RGMII_RXD_CFG_S 16 -#define CSR_RGMII_RXD_CFG_M 0x70000 -#define CSR_RGMII_EDGE_ALIGN BIT(8) -#define CSR_RGMII_RXC_90DEG_CFG_S 4 -#define CSR_RGMII_RXC_90DEG_CFG_M 0xf0 -#define CSR_RGMII_RXC_0DEG_CFG_S 0 -#define CSR_RGMII_RXC_0DEG_CFG_M 0x0f - -#define P5RGMIITXCR 0x7b04 -#define CSR_RGMII_TXEN_CFG_S 16 -#define CSR_RGMII_TXEN_CFG_M 0x70000 -#define CSR_RGMII_TXD_CFG_S 8 -#define CSR_RGMII_TXD_CFG_M 0x700 -#define CSR_RGMII_TXC_CFG_S 0 -#define CSR_RGMII_TXC_CFG_M 0x1f - -#define CHIP_REV 0x7ffc -#define CHIP_NAME_S 16 -#define CHIP_NAME_M 0xffff0000 -#define CHIP_REV_S 0 -#define CHIP_REV_M 0x0f - -/* MMD registers */ -#define CORE_PLL_GROUP2 0x401 -#define RG_SYSPLL_EN_NORMAL BIT(15) -#define RG_SYSPLL_VODEN BIT(14) -#define RG_SYSPLL_POSDIV_S 5 -#define RG_SYSPLL_POSDIV_M 0x60 - -#define CORE_PLL_GROUP4 0x403 -#define RG_SYSPLL_DDSFBK_EN BIT(12) -#define RG_SYSPLL_BIAS_EN BIT(11) -#define RG_SYSPLL_BIAS_LPF_EN BIT(10) - -#define CORE_PLL_GROUP5 0x404 -#define RG_LCDDS_PCW_NCPO1_S 0 -#define RG_LCDDS_PCW_NCPO1_M 0xffff - -#define CORE_PLL_GROUP6 0x405 -#define RG_LCDDS_PCW_NCPO0_S 0 -#define RG_LCDDS_PCW_NCPO0_M 0xffff - -#define CORE_PLL_GROUP7 0x406 -#define RG_LCDDS_PWDB BIT(15) -#define RG_LCDDS_ISO_EN BIT(13) -#define RG_LCCDS_C_S 4 -#define RG_LCCDS_C_M 0x70 -#define RG_LCDDS_PCW_NCPO_CHG BIT(3) - -#define CORE_PLL_GROUP10 0x409 -#define RG_LCDDS_SSC_DELTA_S 0 -#define RG_LCDDS_SSC_DELTA_M 0xfff - -#define CORE_PLL_GROUP11 0x40a -#define RG_LCDDS_SSC_DELTA1_S 0 -#define RG_LCDDS_SSC_DELTA1_M 0xfff - -#define CORE_GSWPLL_GCR_1 0x040d -#define GSWPLL_PREDIV_S 14 -#define GSWPLL_PREDIV_M 0xc000 -#define GSWPLL_POSTDIV_200M_S 12 -#define GSWPLL_POSTDIV_200M_M 0x3000 -#define GSWPLL_EN_PRE BIT(11) -#define GSWPLL_FBKSEL BIT(10) -#define GSWPLL_BP BIT(9) -#define GSWPLL_BR BIT(8) -#define GSWPLL_FBKDIV_200M_S 0 -#define GSWPLL_FBKDIV_200M_M 0xff - -#define CORE_GSWPLL_GCR_2 0x040e -#define GSWPLL_POSTDIV_500M_S 8 -#define GSWPLL_POSTDIV_500M_M 0x300 -#define GSWPLL_FBKDIV_500M_S 0 -#define GSWPLL_FBKDIV_500M_M 0xff - -#define TRGMII_GSW_CLK_CG 0x0410 -#define TRGMIICK_EN BIT(1) -#define GSWCK_EN BIT(0) - -static int mt7530_mii_read(struct gsw_mt753x *gsw, int phy, int reg) -{ - if (phy < MT753X_NUM_PHYS) - phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK; - - return mdiobus_read(gsw->host_bus, phy, reg); -} - -static void mt7530_mii_write(struct gsw_mt753x *gsw, int phy, int reg, u16 val) -{ - if (phy < MT753X_NUM_PHYS) - phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK; - - mdiobus_write(gsw->host_bus, phy, reg, val); -} - -static int mt7530_mmd_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg) -{ - u16 val; - - if (addr < MT753X_NUM_PHYS) - addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->host_bus->mdio_lock); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG, - (MMD_ADDR << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M)); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG, reg); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG, - (MMD_DATA << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M)); - - val = gsw->host_bus->read(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG); - - mutex_unlock(&gsw->host_bus->mdio_lock); - - return val; -} - -static void mt7530_mmd_write(struct gsw_mt753x *gsw, int addr, int devad, - u16 reg, u16 val) -{ - if (addr < MT753X_NUM_PHYS) - addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->host_bus->mdio_lock); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG, - (MMD_ADDR << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M)); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG, reg); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG, - (MMD_DATA << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M)); - - gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG, val); - - mutex_unlock(&gsw->host_bus->mdio_lock); -} - -static void mt7530_core_reg_write(struct gsw_mt753x *gsw, u32 reg, u32 val) -{ - gsw->mmd_write(gsw, 0, 0x1f, reg, val); -} - -static void mt7530_trgmii_setting(struct gsw_mt753x *gsw) -{ - u16 i; - - mt7530_core_reg_write(gsw, CORE_PLL_GROUP5, 0x0780); - mdelay(1); - mt7530_core_reg_write(gsw, CORE_PLL_GROUP6, 0); - mt7530_core_reg_write(gsw, CORE_PLL_GROUP10, 0x87); - mdelay(1); - mt7530_core_reg_write(gsw, CORE_PLL_GROUP11, 0x87); - - /* PLL BIAS enable */ - mt7530_core_reg_write(gsw, CORE_PLL_GROUP4, - RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN); - mdelay(1); - - /* PLL LPF enable */ - mt7530_core_reg_write(gsw, CORE_PLL_GROUP4, - RG_SYSPLL_DDSFBK_EN | - RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN); - - /* sys PLL enable */ - mt7530_core_reg_write(gsw, CORE_PLL_GROUP2, - RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN | - (1 << RG_SYSPLL_POSDIV_S)); - - /* LCDDDS PWDS */ - mt7530_core_reg_write(gsw, CORE_PLL_GROUP7, - (3 << RG_LCCDS_C_S) | - RG_LCDDS_PWDB | RG_LCDDS_ISO_EN); - mdelay(1); - - /* Enable MT7530 TRGMII clock */ - mt7530_core_reg_write(gsw, TRGMII_GSW_CLK_CG, GSWCK_EN | TRGMIICK_EN); - - /* lower Tx Driving */ - for (i = 0 ; i < NUM_TRGMII_ODT; i++) - mt753x_reg_write(gsw, TRGMII_TD_ODT(i), - (4 << TX_DM_DRVP_S) | (4 << TX_DM_DRVN_S)); -} - -static void mt7530_rgmii_setting(struct gsw_mt753x *gsw) -{ - u32 val; - - mt7530_core_reg_write(gsw, CORE_PLL_GROUP5, 0x0c80); - mdelay(1); - mt7530_core_reg_write(gsw, CORE_PLL_GROUP6, 0); - mt7530_core_reg_write(gsw, CORE_PLL_GROUP10, 0x87); - mdelay(1); - mt7530_core_reg_write(gsw, CORE_PLL_GROUP11, 0x87); - - val = mt753x_reg_read(gsw, TRGMII_TXCTRL); - val &= ~TXC_INV; - mt753x_reg_write(gsw, TRGMII_TXCTRL, val); - - mt753x_reg_write(gsw, TRGMII_TCK_CTRL, - (8 << TX_TAP_S) | (0x55 << TX_TRAIN_WD_S)); -} - -static int mt7530_mac_port_setup(struct gsw_mt753x *gsw) -{ - u32 hwstrap, p6ecr = 0, p5mcr, p6mcr, phyad; - - hwstrap = mt753x_reg_read(gsw, MHWSTRAP); - hwstrap &= ~(P6_INTF_DIS | P5_INTF_MODE_RGMII | P5_INTF_DIS_S); - hwstrap |= P5_INTF_SEL_GMAC5; - if (!gsw->port5_cfg.enabled) { - p5mcr = FORCE_MODE; - hwstrap |= P5_INTF_DIS_S; - } else { - p5mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | - MAC_MODE | MAC_TX_EN | MAC_RX_EN | - BKOFF_EN | BACKPR_EN; - - if (gsw->port5_cfg.force_link) { - p5mcr |= FORCE_MODE | FORCE_LINK | FORCE_RX_FC | - FORCE_TX_FC; - p5mcr |= gsw->port5_cfg.speed << FORCE_SPD_S; - - if (gsw->port5_cfg.duplex) - p5mcr |= FORCE_DPX; - } - - switch (gsw->port5_cfg.phy_mode) { - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_GMII: - break; - case PHY_INTERFACE_MODE_RGMII: - hwstrap |= P5_INTF_MODE_RGMII; - break; - default: - dev_info(gsw->dev, "%s is not supported by port5\n", - phy_modes(gsw->port5_cfg.phy_mode)); - p5mcr = FORCE_MODE; - hwstrap |= P5_INTF_DIS_S; - } - - /* Port5 to PHY direct mode */ - if (of_property_read_u32(gsw->port5_cfg.np, "phy-address", - &phyad)) - goto parse_p6; - - if (phyad != 0 && phyad != 4) { - dev_info(gsw->dev, - "Only PHY 0/4 can be connected to Port 5\n"); - goto parse_p6; - } - - hwstrap &= ~P5_INTF_SEL_GMAC5; - if (phyad == 0) - hwstrap |= P5_PHY0_SEL; - else - hwstrap &= ~P5_PHY0_SEL; - } - -parse_p6: - if (!gsw->port6_cfg.enabled) { - p6mcr = FORCE_MODE; - hwstrap |= P6_INTF_DIS; - } else { - p6mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | - MAC_MODE | MAC_TX_EN | MAC_RX_EN | - BKOFF_EN | BACKPR_EN; - - if (gsw->port6_cfg.force_link) { - p6mcr |= FORCE_MODE | FORCE_LINK | FORCE_RX_FC | - FORCE_TX_FC; - p6mcr |= gsw->port6_cfg.speed << FORCE_SPD_S; - - if (gsw->port6_cfg.duplex) - p6mcr |= FORCE_DPX; - } - - switch (gsw->port6_cfg.phy_mode) { - case PHY_INTERFACE_MODE_RGMII: - p6ecr = BIT(1); - break; - case PHY_INTERFACE_MODE_TRGMII: - /* set MT7530 central align */ - p6ecr = BIT(0); - break; - default: - dev_info(gsw->dev, "%s is not supported by port6\n", - phy_modes(gsw->port6_cfg.phy_mode)); - p6mcr = FORCE_MODE; - hwstrap |= P6_INTF_DIS; - } - } - - mt753x_reg_write(gsw, MHWSTRAP, hwstrap); - mt753x_reg_write(gsw, P6ECR, p6ecr); - - mt753x_reg_write(gsw, PMCR(5), p5mcr); - mt753x_reg_write(gsw, PMCR(6), p6mcr); - - return 0; -} - -static void mt7530_core_pll_setup(struct gsw_mt753x *gsw) -{ - u32 hwstrap; - - hwstrap = mt753x_reg_read(gsw, HWSTRAP); - - switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) { - case XTAL_40MHZ: - /* Disable MT7530 core clock */ - mt7530_core_reg_write(gsw, TRGMII_GSW_CLK_CG, 0); - - /* disable MT7530 PLL */ - mt7530_core_reg_write(gsw, CORE_GSWPLL_GCR_1, - (2 << GSWPLL_POSTDIV_200M_S) | - (32 << GSWPLL_FBKDIV_200M_S)); - - /* For MT7530 core clock = 500Mhz */ - mt7530_core_reg_write(gsw, CORE_GSWPLL_GCR_2, - (1 << GSWPLL_POSTDIV_500M_S) | - (25 << GSWPLL_FBKDIV_500M_S)); - - /* Enable MT7530 PLL */ - mt7530_core_reg_write(gsw, CORE_GSWPLL_GCR_1, - (2 << GSWPLL_POSTDIV_200M_S) | - (32 << GSWPLL_FBKDIV_200M_S) | - GSWPLL_EN_PRE); - - usleep_range(20, 40); - - /* Enable MT7530 core clock */ - mt7530_core_reg_write(gsw, TRGMII_GSW_CLK_CG, GSWCK_EN); - break; - default: - /* TODO: PLL settings for 20/25MHz */ - break; - } - - hwstrap = mt753x_reg_read(gsw, HWSTRAP); - hwstrap |= CHG_TRAP; - if (gsw->direct_phy_access) - hwstrap &= ~C_MDIO_BPS_S; - else - hwstrap |= C_MDIO_BPS_S; - - mt753x_reg_write(gsw, MHWSTRAP, hwstrap); - - if (gsw->port6_cfg.enabled && - gsw->port6_cfg.phy_mode == PHY_INTERFACE_MODE_TRGMII) { - mt7530_trgmii_setting(gsw); - } else { - /* RGMII */ - mt7530_rgmii_setting(gsw); - } - - /* delay setting for 10/1000M */ - mt753x_reg_write(gsw, P5RGMIIRXCR, - CSR_RGMII_EDGE_ALIGN | - (2 << CSR_RGMII_RXC_0DEG_CFG_S)); - mt753x_reg_write(gsw, P5RGMIITXCR, 0x14 << CSR_RGMII_TXC_CFG_S); -} - -static int mt7530_sw_detect(struct gsw_mt753x *gsw, struct chip_rev *crev) -{ - u32 rev; - - rev = mt753x_reg_read(gsw, CHIP_REV); - - if (((rev & CHIP_NAME_M) >> CHIP_NAME_S) == MT7530) { - if (crev) { - crev->rev = rev & CHIP_REV_M; - crev->name = "MT7530"; - } - - return 0; - } - - return -ENODEV; -} - -static void mt7530_phy_setting(struct gsw_mt753x *gsw) -{ - int i; - u32 val; - - for (i = 0; i < MT753X_NUM_PHYS; i++) { - /* Disable EEE */ - gsw->mmd_write(gsw, i, PHY_DEV07, PHY_DEV07_REG_03C, 0); - - /* Enable HW auto downshift */ - gsw->mii_write(gsw, i, 0x1f, 0x1); - val = gsw->mii_read(gsw, i, PHY_EXT_REG_14); - val |= PHY_EN_DOWN_SHFIT; - gsw->mii_write(gsw, i, PHY_EXT_REG_14, val); - - /* Increase SlvDPSready time */ - gsw->mii_write(gsw, i, 0x1f, 0x52b5); - gsw->mii_write(gsw, i, PHY_TR_REG_10, 0xafae); - gsw->mii_write(gsw, i, PHY_TR_REG_12, 0x2f); - gsw->mii_write(gsw, i, PHY_TR_REG_10, 0x8fae); - - /* Increase post_update_timer */ - gsw->mii_write(gsw, i, 0x1f, 0x3); - gsw->mii_write(gsw, i, PHY_LPI_REG_11, 0x4b); - gsw->mii_write(gsw, i, 0x1f, 0); - - /* Adjust 100_mse_threshold */ - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_123, 0xffff); - - /* Disable mcc */ - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_A6, 0x300); - } -} - -static inline bool get_phy_access_mode(const struct device_node *np) -{ - return of_property_read_bool(np, "mt7530,direct-phy-access"); -} - -static int mt7530_sw_init(struct gsw_mt753x *gsw) -{ - int i; - u32 val; - - gsw->direct_phy_access = get_phy_access_mode(gsw->dev->of_node); - - /* Force MT7530 to use (in)direct PHY access */ - val = mt753x_reg_read(gsw, HWSTRAP); - val |= CHG_TRAP; - if (gsw->direct_phy_access) - val &= ~C_MDIO_BPS_S; - else - val |= C_MDIO_BPS_S; - mt753x_reg_write(gsw, MHWSTRAP, val); - - /* Read PHY address base from HWSTRAP */ - gsw->phy_base = (((val & SMI_ADDR_M) >> SMI_ADDR_S) << 3) + 8; - gsw->phy_base &= MT753X_SMI_ADDR_MASK; - - if (gsw->direct_phy_access) { - gsw->mii_read = mt7530_mii_read; - gsw->mii_write = mt7530_mii_write; - gsw->mmd_read = mt7530_mmd_read; - gsw->mmd_write = mt7530_mmd_write; - } else { - gsw->mii_read = mt753x_mii_read; - gsw->mii_write = mt753x_mii_write; - gsw->mmd_read = mt753x_mmd_ind_read; - gsw->mmd_write = mt753x_mmd_ind_write; - } - - for (i = 0; i < MT753X_NUM_PHYS; i++) { - val = gsw->mii_read(gsw, i, MII_BMCR); - val |= BMCR_PDOWN; - gsw->mii_write(gsw, i, MII_BMCR, val); - } - - /* Force MAC link down before reset */ - mt753x_reg_write(gsw, PMCR(5), FORCE_MODE); - mt753x_reg_write(gsw, PMCR(6), FORCE_MODE); - - /* Switch soft reset */ - /* BUG: sw reset causes gsw int flooding */ - mt753x_reg_write(gsw, SYS_CTRL, SW_PHY_RST | SW_SYS_RST | SW_REG_RST); - usleep_range(10, 20); - - /* global mac control settings configuration */ - mt753x_reg_write(gsw, GMACCR, - LATE_COL_DROP | (15 << MTCC_LMT_S) | - (2 << MAX_RX_JUMBO_S) | RX_PKT_LEN_MAX_JUMBO); - - mt7530_core_pll_setup(gsw); - mt7530_mac_port_setup(gsw); - - return 0; -} - -static int mt7530_sw_post_init(struct gsw_mt753x *gsw) -{ - int i; - u32 val; - - mt7530_phy_setting(gsw); - - for (i = 0; i < MT753X_NUM_PHYS; i++) { - val = gsw->mii_read(gsw, i, MII_BMCR); - val &= ~BMCR_PDOWN; - gsw->mii_write(gsw, i, MII_BMCR, val); - } - - return 0; -} - -struct mt753x_sw_id mt7530_id = { - .model = MT7530, - .detect = mt7530_sw_detect, - .init = mt7530_sw_init, - .post_init = mt7530_sw_post_init -}; diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7530.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7530.h deleted file mode 100644 index 40243d4e5a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7530.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - */ - -#ifndef _MT7530_H_ -#define _MT7530_H_ - -#include "mt753x.h" - -extern struct mt753x_sw_id mt7530_id; - -#endif /* _MT7530_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.c deleted file mode 100644 index 7ebf09c102..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.c +++ /dev/null @@ -1,918 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Zhanguo Ju - */ - -#include -#include -#include - -#include "mt753x.h" -#include "mt753x_regs.h" - -/* MT7531 registers */ -#define SGMII_REG_BASE 0x5000 -#define SGMII_REG_PORT_BASE 0x1000 -#define SGMII_REG(p, r) (SGMII_REG_BASE + \ - (p) * SGMII_REG_PORT_BASE + (r)) -#define PCS_CONTROL_1(p) SGMII_REG(p, 0x00) -#define SGMII_MODE(p) SGMII_REG(p, 0x20) -#define QPHY_PWR_STATE_CTRL(p) SGMII_REG(p, 0xe8) -#define PHYA_CTRL_SIGNAL3(p) SGMII_REG(p, 0x128) - -/* Fields of PCS_CONTROL_1 */ -#define SGMII_LINK_STATUS BIT(18) -#define SGMII_AN_ENABLE BIT(12) -#define SGMII_AN_RESTART BIT(9) - -/* Fields of SGMII_MODE */ -#define SGMII_REMOTE_FAULT_DIS BIT(8) -#define SGMII_IF_MODE_FORCE_DUPLEX BIT(4) -#define SGMII_IF_MODE_FORCE_SPEED_S 0x2 -#define SGMII_IF_MODE_FORCE_SPEED_M 0x0c -#define SGMII_IF_MODE_ADVERT_AN BIT(1) - -/* Values of SGMII_IF_MODE_FORCE_SPEED */ -#define SGMII_IF_MODE_FORCE_SPEED_10 0 -#define SGMII_IF_MODE_FORCE_SPEED_100 1 -#define SGMII_IF_MODE_FORCE_SPEED_1000 2 - -/* Fields of QPHY_PWR_STATE_CTRL */ -#define PHYA_PWD BIT(4) - -/* Fields of PHYA_CTRL_SIGNAL3 */ -#define RG_TPHY_SPEED_S 2 -#define RG_TPHY_SPEED_M 0x0c - -/* Values of RG_TPHY_SPEED */ -#define RG_TPHY_SPEED_1000 0 -#define RG_TPHY_SPEED_2500 1 - -/* Unique fields of (M)HWSTRAP for MT7531 */ -#define XTAL_FSEL_S 7 -#define XTAL_FSEL_M BIT(7) -#define PHY_EN BIT(6) -#define CHG_STRAP BIT(8) - -/* Efuse Register Define */ -#define GBE_EFUSE 0x7bc8 -#define GBE_SEL_EFUSE_EN BIT(0) - -/* PHY ENABLE Register bitmap define */ -#define PHY_DEV1F 0x1f -#define PHY_DEV1F_REG_44 0x44 -#define PHY_DEV1F_REG_104 0x104 -#define PHY_DEV1F_REG_10A 0x10a -#define PHY_DEV1F_REG_10B 0x10b -#define PHY_DEV1F_REG_10C 0x10c -#define PHY_DEV1F_REG_10D 0x10d -#define PHY_DEV1F_REG_268 0x268 -#define PHY_DEV1F_REG_269 0x269 -#define PHY_DEV1F_REG_403 0x403 - -/* Fields of PHY_DEV1F_REG_403 */ -#define GBE_EFUSE_SETTING BIT(3) -#define PHY_EN_BYPASS_MODE BIT(4) -#define POWER_ON_OFF BIT(5) -#define PHY_PLL_M GENMASK(9, 8) -#define PHY_PLL_SEL(x) (((x) << 8) & GENMASK(9, 8)) - -/* PHY EEE Register bitmap of define */ -#define PHY_DEV07 0x07 -#define PHY_DEV07_REG_03C 0x3c - -/* PHY Extend Register 0x14 bitmap of define */ -#define PHY_EXT_REG_14 0x14 - -/* Fields of PHY_EXT_REG_14 */ -#define PHY_EN_DOWN_SHFIT BIT(4) - -/* PHY Extend Register 0x17 bitmap of define */ -#define PHY_EXT_REG_17 0x17 - -/* Fields of PHY_EXT_REG_17 */ -#define PHY_LINKDOWN_POWER_SAVING_EN BIT(4) - -/* PHY Token Ring Register 0x10 bitmap of define */ -#define PHY_TR_REG_10 0x10 - -/* PHY Token Ring Register 0x12 bitmap of define */ -#define PHY_TR_REG_12 0x12 - -/* PHY DEV 0x1e Register bitmap of define */ -#define PHY_DEV1E 0x1e -#define PHY_DEV1E_REG_13 0x13 -#define PHY_DEV1E_REG_14 0x14 -#define PHY_DEV1E_REG_41 0x41 -#define PHY_DEV1E_REG_A6 0xa6 -#define PHY_DEV1E_REG_0C6 0x0c6 -#define PHY_DEV1E_REG_0FE 0x0fe -#define PHY_DEV1E_REG_123 0x123 -#define PHY_DEV1E_REG_189 0x189 - -/* Fields of PHY_DEV1E_REG_0C6 */ -#define PHY_POWER_SAVING_S 8 -#define PHY_POWER_SAVING_M 0x300 -#define PHY_POWER_SAVING_TX 0x0 - -/* Fields of PHY_DEV1E_REG_189 */ -#define DESCRAMBLER_CLEAR_EN 0x1 - -/* Values of XTAL_FSEL_S */ -#define XTAL_40MHZ 0 -#define XTAL_25MHZ 1 - -#define PLLGP_EN 0x7820 -#define EN_COREPLL BIT(2) -#define SW_CLKSW BIT(1) -#define SW_PLLGP BIT(0) - -#define PLLGP_CR0 0x78a8 -#define RG_COREPLL_EN BIT(22) -#define RG_COREPLL_POSDIV_S 23 -#define RG_COREPLL_POSDIV_M 0x3800000 -#define RG_COREPLL_SDM_PCW_S 1 -#define RG_COREPLL_SDM_PCW_M 0x3ffffe -#define RG_COREPLL_SDM_PCW_CHG BIT(0) - -/* TOP Signals Status Register */ -#define TOP_SIG_SR 0x780c -#define PAD_DUAL_SGMII_EN BIT(1) - -/* RGMII and SGMII PLL clock */ -#define ANA_PLLGP_CR2 0x78b0 -#define ANA_PLLGP_CR5 0x78bc - -/* GPIO mode define */ -#define GPIO_MODE_REGS(x) (0x7c0c + (((x) / 8) * 4)) -#define GPIO_MODE_S 4 - -/* GPIO GROUP IOLB SMT0 Control */ -#define SMT0_IOLB 0x7f04 -#define SMT_IOLB_5_SMI_MDC_EN BIT(5) - -/* Unique fields of PMCR for MT7531 */ -#define FORCE_MODE_EEE1G BIT(25) -#define FORCE_MODE_EEE100 BIT(26) -#define FORCE_MODE_TX_FC BIT(27) -#define FORCE_MODE_RX_FC BIT(28) -#define FORCE_MODE_DPX BIT(29) -#define FORCE_MODE_SPD BIT(30) -#define FORCE_MODE_LNK BIT(31) -#define FORCE_MODE BIT(15) - -#define CHIP_REV 0x781C -#define CHIP_NAME_S 16 -#define CHIP_NAME_M 0xffff0000 -#define CHIP_REV_S 0 -#define CHIP_REV_M 0x0f -#define CHIP_REV_E1 0x0 - -#define CLKGEN_CTRL 0x7500 -#define CLK_SKEW_OUT_S 8 -#define CLK_SKEW_OUT_M 0x300 -#define CLK_SKEW_IN_S 6 -#define CLK_SKEW_IN_M 0xc0 -#define RXCLK_NO_DELAY BIT(5) -#define TXCLK_NO_REVERSE BIT(4) -#define GP_MODE_S 1 -#define GP_MODE_M 0x06 -#define GP_CLK_EN BIT(0) - -/* Values of GP_MODE */ -#define GP_MODE_RGMII 0 -#define GP_MODE_MII 1 -#define GP_MODE_REV_MII 2 - -/* Values of CLK_SKEW_IN */ -#define CLK_SKEW_IN_NO_CHANGE 0 -#define CLK_SKEW_IN_DELAY_100PPS 1 -#define CLK_SKEW_IN_DELAY_200PPS 2 -#define CLK_SKEW_IN_REVERSE 3 - -/* Values of CLK_SKEW_OUT */ -#define CLK_SKEW_OUT_NO_CHANGE 0 -#define CLK_SKEW_OUT_DELAY_100PPS 1 -#define CLK_SKEW_OUT_DELAY_200PPS 2 -#define CLK_SKEW_OUT_REVERSE 3 - -/* Proprietory Control Register of Internal Phy device 0x1e */ -#define RXADC_CONTROL_3 0xc2 -#define RXADC_LDO_CONTROL_2 0xd3 - -/* Proprietory Control Register of Internal Phy device 0x1f */ -#define TXVLD_DA_271 0x271 -#define TXVLD_DA_272 0x272 -#define TXVLD_DA_273 0x273 - -/* DSP Channel and NOD_ADDR*/ -#define DSP_CH 0x2 -#define DSP_NOD_ADDR 0xD - -/* gpio pinmux pins and functions define */ -static int gpio_int_pins[] = {0}; -static int gpio_int_funcs[] = {1}; -static int gpio_mdc_pins[] = {11, 20}; -static int gpio_mdc_funcs[] = {2, 2}; -static int gpio_mdio_pins[] = {12, 21}; -static int gpio_mdio_funcs[] = {2, 2}; - -static int mt7531_set_port_sgmii_force_mode(struct gsw_mt753x *gsw, u32 port, - struct mt753x_port_cfg *port_cfg) -{ - u32 speed, port_base, val; - ktime_t timeout; - u32 timeout_us; - - if (port < 5 || port >= MT753X_NUM_PORTS) { - dev_info(gsw->dev, "port %d is not a SGMII port\n", port); - return -EINVAL; - } - - port_base = port - 5; - - switch (port_cfg->speed) { - case MAC_SPD_1000: - speed = RG_TPHY_SPEED_1000; - break; - case MAC_SPD_2500: - speed = RG_TPHY_SPEED_2500; - break; - default: - dev_info(gsw->dev, "invalid SGMII speed idx %d for port %d\n", - port_cfg->speed, port); - - speed = RG_TPHY_SPEED_1000; - } - - /* Step 1: Speed select register setting */ - val = mt753x_reg_read(gsw, PHYA_CTRL_SIGNAL3(port_base)); - val &= ~RG_TPHY_SPEED_M; - val |= speed << RG_TPHY_SPEED_S; - mt753x_reg_write(gsw, PHYA_CTRL_SIGNAL3(port_base), val); - - /* Step 2 : Disable AN */ - val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base)); - val &= ~SGMII_AN_ENABLE; - mt753x_reg_write(gsw, PCS_CONTROL_1(port_base), val); - - /* Step 3: SGMII force mode setting */ - val = mt753x_reg_read(gsw, SGMII_MODE(port_base)); - val &= ~SGMII_IF_MODE_ADVERT_AN; - val &= ~SGMII_IF_MODE_FORCE_SPEED_M; - val |= SGMII_IF_MODE_FORCE_SPEED_1000 << SGMII_IF_MODE_FORCE_SPEED_S; - val |= SGMII_IF_MODE_FORCE_DUPLEX; - /* For sgmii force mode, 0 is full duplex and 1 is half duplex */ - if (port_cfg->duplex) - val &= ~SGMII_IF_MODE_FORCE_DUPLEX; - - mt753x_reg_write(gsw, SGMII_MODE(port_base), val); - - /* Step 4: XXX: Disable Link partner's AN and set force mode */ - - /* Step 5: XXX: Special setting for PHYA ==> reserved for flexible */ - - /* Step 6 : Release PHYA power down state */ - val = mt753x_reg_read(gsw, QPHY_PWR_STATE_CTRL(port_base)); - val &= ~PHYA_PWD; - mt753x_reg_write(gsw, QPHY_PWR_STATE_CTRL(port_base), val); - - /* Step 7 : Polling SGMII_LINK_STATUS */ - timeout_us = 2000000; - timeout = ktime_add_us(ktime_get(), timeout_us); - while (1) { - val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base)); - val &= SGMII_LINK_STATUS; - - if (val) - break; - - if (ktime_compare(ktime_get(), timeout) > 0) - return -ETIMEDOUT; - } - - return 0; -} - -static int mt7531_set_port_sgmii_an_mode(struct gsw_mt753x *gsw, u32 port, - struct mt753x_port_cfg *port_cfg) -{ - u32 speed, port_base, val; - ktime_t timeout; - u32 timeout_us; - - if (port < 5 || port >= MT753X_NUM_PORTS) { - dev_info(gsw->dev, "port %d is not a SGMII port\n", port); - return -EINVAL; - } - - port_base = port - 5; - - switch (port_cfg->speed) { - case MAC_SPD_1000: - speed = RG_TPHY_SPEED_1000; - break; - case MAC_SPD_2500: - speed = RG_TPHY_SPEED_2500; - break; - default: - dev_info(gsw->dev, "invalid SGMII speed idx %d for port %d\n", - port_cfg->speed, port); - - speed = RG_TPHY_SPEED_1000; - } - - /* Step 1: Speed select register setting */ - val = mt753x_reg_read(gsw, PHYA_CTRL_SIGNAL3(port_base)); - val &= ~RG_TPHY_SPEED_M; - val |= speed << RG_TPHY_SPEED_S; - mt753x_reg_write(gsw, PHYA_CTRL_SIGNAL3(port_base), val); - - /* Step 2: Remote fault disable */ - val = mt753x_reg_read(gsw, SGMII_MODE(port)); - val |= SGMII_REMOTE_FAULT_DIS; - mt753x_reg_write(gsw, SGMII_MODE(port), val); - - /* Step 3: Setting Link partner's AN enable = 1 */ - - /* Step 4: Setting Link partner's device ability for speed/duplex */ - - /* Step 5: AN re-start */ - val = mt753x_reg_read(gsw, PCS_CONTROL_1(port)); - val |= SGMII_AN_RESTART; - mt753x_reg_write(gsw, PCS_CONTROL_1(port), val); - - /* Step 6: Special setting for PHYA ==> reserved for flexible */ - - /* Step 7 : Polling SGMII_LINK_STATUS */ - timeout_us = 2000000; - timeout = ktime_add_us(ktime_get(), timeout_us); - while (1) { - val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base)); - val &= SGMII_LINK_STATUS; - - if (val) - break; - - if (ktime_compare(ktime_get(), timeout) > 0) - return -ETIMEDOUT; - } - - return 0; -} - -static int mt7531_set_port_rgmii(struct gsw_mt753x *gsw, u32 port) -{ - u32 val; - - if (port != 5) { - dev_info(gsw->dev, "RGMII mode is not available for port %d\n", - port); - return -EINVAL; - } - - val = mt753x_reg_read(gsw, CLKGEN_CTRL); - val |= GP_CLK_EN; - val &= ~GP_MODE_M; - val |= GP_MODE_RGMII << GP_MODE_S; - val |= TXCLK_NO_REVERSE; - val |= RXCLK_NO_DELAY; - val &= ~CLK_SKEW_IN_M; - val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S; - val &= ~CLK_SKEW_OUT_M; - val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S; - mt753x_reg_write(gsw, CLKGEN_CTRL, val); - - return 0; -} - -static int mt7531_mac_port_setup(struct gsw_mt753x *gsw, u32 port, - struct mt753x_port_cfg *port_cfg) -{ - u32 pmcr; - u32 speed; - - if (port < 5 || port >= MT753X_NUM_PORTS) { - dev_info(gsw->dev, "port %d is not a MAC port\n", port); - return -EINVAL; - } - - if (port_cfg->enabled) { - pmcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) | - MAC_MODE | MAC_TX_EN | MAC_RX_EN | - BKOFF_EN | BACKPR_EN; - - if (port_cfg->force_link) { - /* PMCR's speed field 0x11 is reserved, - * sw should set 0x10 - */ - speed = port_cfg->speed; - if (port_cfg->speed == MAC_SPD_2500) - speed = MAC_SPD_1000; - - pmcr |= FORCE_MODE_LNK | FORCE_LINK | - FORCE_MODE_SPD | FORCE_MODE_DPX | - FORCE_MODE_RX_FC | FORCE_MODE_TX_FC | - FORCE_RX_FC | FORCE_TX_FC | - (speed << FORCE_SPD_S); - - if (port_cfg->duplex) - pmcr |= FORCE_DPX; - } - } else { - pmcr = FORCE_MODE_LNK; - } - - switch (port_cfg->phy_mode) { - case PHY_INTERFACE_MODE_RGMII: - mt7531_set_port_rgmii(gsw, port); - break; - case PHY_INTERFACE_MODE_SGMII: - if (port_cfg->force_link) - mt7531_set_port_sgmii_force_mode(gsw, port, port_cfg); - else - mt7531_set_port_sgmii_an_mode(gsw, port, port_cfg); - break; - default: - if (port_cfg->enabled) - dev_info(gsw->dev, "%s is not supported by port %d\n", - phy_modes(port_cfg->phy_mode), port); - - pmcr = FORCE_MODE_LNK; - } - - mt753x_reg_write(gsw, PMCR(port), pmcr); - - return 0; -} - -static void mt7531_core_pll_setup(struct gsw_mt753x *gsw) -{ - u32 hwstrap; - u32 val; - - val = mt753x_reg_read(gsw, TOP_SIG_SR); - if (val & PAD_DUAL_SGMII_EN) - return; - - hwstrap = mt753x_reg_read(gsw, HWSTRAP); - - switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) { - case XTAL_25MHZ: - /* Step 1 : Disable MT7531 COREPLL */ - val = mt753x_reg_read(gsw, PLLGP_EN); - val &= ~EN_COREPLL; - mt753x_reg_write(gsw, PLLGP_EN, val); - - /* Step 2: switch to XTAL output */ - val = mt753x_reg_read(gsw, PLLGP_EN); - val |= SW_CLKSW; - mt753x_reg_write(gsw, PLLGP_EN, val); - - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_EN; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - /* Step 3: disable PLLGP and enable program PLLGP */ - val = mt753x_reg_read(gsw, PLLGP_EN); - val |= SW_PLLGP; - mt753x_reg_write(gsw, PLLGP_EN, val); - - /* Step 4: program COREPLL output frequency to 500MHz */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_POSDIV_M; - val |= 2 << RG_COREPLL_POSDIV_S; - mt753x_reg_write(gsw, PLLGP_CR0, val); - usleep_range(25, 35); - - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_SDM_PCW_M; - val |= 0x140000 << RG_COREPLL_SDM_PCW_S; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - /* Set feedback divide ratio update signal to high */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val |= RG_COREPLL_SDM_PCW_CHG; - mt753x_reg_write(gsw, PLLGP_CR0, val); - /* Wait for at least 16 XTAL clocks */ - usleep_range(10, 20); - - /* Step 5: set feedback divide ratio update signal to low */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_SDM_PCW_CHG; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - /* Enable 325M clock for SGMII */ - mt753x_reg_write(gsw, ANA_PLLGP_CR5, 0xad0000); - - /* Enable 250SSC clock for RGMII */ - mt753x_reg_write(gsw, ANA_PLLGP_CR2, 0x4f40000); - - /* Step 6: Enable MT7531 PLL */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val |= RG_COREPLL_EN; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - val = mt753x_reg_read(gsw, PLLGP_EN); - val |= EN_COREPLL; - mt753x_reg_write(gsw, PLLGP_EN, val); - usleep_range(25, 35); - - break; - case XTAL_40MHZ: - /* Step 1 : Disable MT7531 COREPLL */ - val = mt753x_reg_read(gsw, PLLGP_EN); - val &= ~EN_COREPLL; - mt753x_reg_write(gsw, PLLGP_EN, val); - - /* Step 2: switch to XTAL output */ - val = mt753x_reg_read(gsw, PLLGP_EN); - val |= SW_CLKSW; - mt753x_reg_write(gsw, PLLGP_EN, val); - - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_EN; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - /* Step 3: disable PLLGP and enable program PLLGP */ - val = mt753x_reg_read(gsw, PLLGP_EN); - val |= SW_PLLGP; - mt753x_reg_write(gsw, PLLGP_EN, val); - - /* Step 4: program COREPLL output frequency to 500MHz */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_POSDIV_M; - val |= 2 << RG_COREPLL_POSDIV_S; - mt753x_reg_write(gsw, PLLGP_CR0, val); - usleep_range(25, 35); - - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_SDM_PCW_M; - val |= 0x190000 << RG_COREPLL_SDM_PCW_S; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - /* Set feedback divide ratio update signal to high */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val |= RG_COREPLL_SDM_PCW_CHG; - mt753x_reg_write(gsw, PLLGP_CR0, val); - /* Wait for at least 16 XTAL clocks */ - usleep_range(10, 20); - - /* Step 5: set feedback divide ratio update signal to low */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val &= ~RG_COREPLL_SDM_PCW_CHG; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - /* Enable 325M clock for SGMII */ - mt753x_reg_write(gsw, ANA_PLLGP_CR5, 0xad0000); - - /* Enable 250SSC clock for RGMII */ - mt753x_reg_write(gsw, ANA_PLLGP_CR2, 0x4f40000); - - /* Step 6: Enable MT7531 PLL */ - val = mt753x_reg_read(gsw, PLLGP_CR0); - val |= RG_COREPLL_EN; - mt753x_reg_write(gsw, PLLGP_CR0, val); - - val = mt753x_reg_read(gsw, PLLGP_EN); - val |= EN_COREPLL; - mt753x_reg_write(gsw, PLLGP_EN, val); - usleep_range(25, 35); - break; - } -} - -static int mt7531_internal_phy_calibration(struct gsw_mt753x *gsw) -{ - return 0; -} - -static int mt7531_sw_detect(struct gsw_mt753x *gsw, struct chip_rev *crev) -{ - u32 rev, topsig; - - rev = mt753x_reg_read(gsw, CHIP_REV); - - if (((rev & CHIP_NAME_M) >> CHIP_NAME_S) == MT7531) { - if (crev) { - topsig = mt753x_reg_read(gsw, TOP_SIG_SR); - - crev->rev = rev & CHIP_REV_M; - crev->name = topsig & PAD_DUAL_SGMII_EN ? - "MT7531AE" : "MT7531BE"; - } - - return 0; - } - - return -ENODEV; -} - -static void pinmux_set_mux_7531(struct gsw_mt753x *gsw, u32 pin, u32 mode) -{ - u32 val; - - val = mt753x_reg_read(gsw, GPIO_MODE_REGS(pin)); - val &= ~(0xf << (pin & 7) * GPIO_MODE_S); - val |= mode << (pin & 7) * GPIO_MODE_S; - mt753x_reg_write(gsw, GPIO_MODE_REGS(pin), val); -} - -static int mt7531_set_gpio_pinmux(struct gsw_mt753x *gsw) -{ - u32 group = 0; - struct device_node *np = gsw->dev->of_node; - - /* Set GPIO 0 interrupt mode */ - pinmux_set_mux_7531(gsw, gpio_int_pins[0], gpio_int_funcs[0]); - - of_property_read_u32(np, "mediatek,mdio_master_pinmux", &group); - - /* group = 0: do nothing, 1: 1st group (AE), 2: 2nd group (BE) */ - if (group > 0 && group <= 2) { - group--; - pinmux_set_mux_7531(gsw, gpio_mdc_pins[group], - gpio_mdc_funcs[group]); - pinmux_set_mux_7531(gsw, gpio_mdio_pins[group], - gpio_mdio_funcs[group]); - } - - return 0; -} - -static void mt7531_phy_pll_setup(struct gsw_mt753x *gsw) -{ - u32 hwstrap; - u32 val; - - hwstrap = mt753x_reg_read(gsw, HWSTRAP); - - switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) { - case XTAL_25MHZ: - /* disable pll auto calibration */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_104, 0x608); - - /* change pll sel */ - val = gsw->mmd_read(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_403); - val &= ~(PHY_PLL_M); - val |= PHY_PLL_SEL(3); - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val); - - /* set divider ratio */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_10A, 0x1009); - - /* set divider ratio */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10B, 0x7c6); - - /* capacitance and resistance adjustment */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_10C, 0xa8be); - - break; - case XTAL_40MHZ: - /* disable pll auto calibration */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_104, 0x608); - - /* change pll sel */ - val = gsw->mmd_read(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_403); - val &= ~(PHY_PLL_M); - val |= PHY_PLL_SEL(3); - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val); - - /* set divider ratio */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_10A, 0x1018); - - /* set divider ratio */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10B, 0xc676); - - /* capacitance and resistance adjustment */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_10C, 0xd8be); - break; - } - - /* power down pll. additional delay is not required via mdio access */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10D, 0x10); - - /* power up pll */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10D, 0x14); -} - -static void mt7531_phy_setting(struct gsw_mt753x *gsw) -{ - int i; - u32 val; - - /* Adjust DAC TX Delay */ - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_44, 0xc0); - - for (i = 0; i < MT753X_NUM_PHYS; i++) { - /* Disable EEE */ - gsw->mmd_write(gsw, i, PHY_DEV07, PHY_DEV07_REG_03C, 0); - - /* Enable HW auto downshift */ - gsw->mii_write(gsw, i, 0x1f, 0x1); - val = gsw->mii_read(gsw, i, PHY_EXT_REG_14); - val |= PHY_EN_DOWN_SHFIT; - gsw->mii_write(gsw, i, PHY_EXT_REG_14, val); - - /* Increase SlvDPSready time */ - gsw->mii_write(gsw, i, 0x1f, 0x52b5); - gsw->mii_write(gsw, i, PHY_TR_REG_10, 0xafae); - gsw->mii_write(gsw, i, PHY_TR_REG_12, 0x2f); - gsw->mii_write(gsw, i, PHY_TR_REG_10, 0x8fae); - gsw->mii_write(gsw, i, 0x1f, 0); - - /* Adjust 100_mse_threshold */ - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_123, 0xffff); - - /* Disable mcc */ - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_A6, 0x300); - - /* PHY link down power saving enable */ - val = gsw->mii_read(gsw, i, PHY_EXT_REG_17); - val |= PHY_LINKDOWN_POWER_SAVING_EN; - gsw->mii_write(gsw, i, PHY_EXT_REG_17, val); - - val = gsw->mmd_read(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_0C6); - val &= ~PHY_POWER_SAVING_M; - val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S; - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_0C6, val); - - /* Set TX Pair delay selection */ - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_13, 0x404); - gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_14, 0x404); - } -} - -static void mt7531_adjust_line_driving(struct gsw_mt753x *gsw, u32 port) -{ - /* For ADC timing margin window for LDO calibration */ - gsw->mmd_write(gsw, port, PHY_DEV1E, RXADC_LDO_CONTROL_2, 0x2222); - - /* Adjust AD sample timing */ - gsw->mmd_write(gsw, port, PHY_DEV1E, RXADC_CONTROL_3, 0x4444); - - /* Adjust Line driver current for different mode */ - gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_271, 0x2ca5); - - /* Adjust Line driver current for different mode */ - gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_272, 0xc6b); - - /* Adjust Line driver amplitude for 10BT */ - gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_273, 0x3000); - - /* Adjust RX Echo path filter */ - gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_0FE, 0x2); - - /* Adjust RX HVGA bias current */ - gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_41, 0x3333); - - /* Adjust TX class AB driver 1 */ - gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_268, 0x388); - - /* Adjust TX class AB driver 2 */ - gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_269, 0x4448); -} - -static void mt7531_eee_setting(struct gsw_mt753x *gsw, u32 port) -{ - u32 tr_reg_control; - u32 val; - - /* Disable generate signal to clear the scramble_lock when lpi mode */ - val = gsw->mmd_read(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_189); - val &= ~DESCRAMBLER_CLEAR_EN; - gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_189, val); - - /* roll back CR*/ - gsw->mii_write(gsw, port, 0x1f, 0x52b5); - gsw->mmd_write(gsw, port, 0x1e, 0x2d1, 0); - tr_reg_control = (1 << 15) | (0 << 13) | (DSP_CH << 11) | - (DSP_NOD_ADDR << 7) | (0x8 << 1); - gsw->mii_write(gsw, port, 17, 0x1b); - gsw->mii_write(gsw, port, 18, 0); - gsw->mii_write(gsw, port, 16, tr_reg_control); - tr_reg_control = (1 << 15) | (0 << 13) | (DSP_CH << 11) | - (DSP_NOD_ADDR << 7) | (0xf << 1); - gsw->mii_write(gsw, port, 17, 0); - gsw->mii_write(gsw, port, 18, 0); - gsw->mii_write(gsw, port, 16, tr_reg_control); - - tr_reg_control = (1 << 15) | (0 << 13) | (DSP_CH << 11) | - (DSP_NOD_ADDR << 7) | (0x10 << 1); - gsw->mii_write(gsw, port, 17, 0x500); - gsw->mii_write(gsw, port, 18, 0); - gsw->mii_write(gsw, port, 16, tr_reg_control); - gsw->mii_write(gsw, port, 0x1f, 0); -} - -static int mt7531_sw_init(struct gsw_mt753x *gsw) -{ - int i; - u32 val; - - gsw->phy_base = (gsw->smi_addr + 1) & MT753X_SMI_ADDR_MASK; - - gsw->mii_read = mt753x_mii_read; - gsw->mii_write = mt753x_mii_write; - gsw->mmd_read = mt753x_mmd_read; - gsw->mmd_write = mt753x_mmd_write; - - for (i = 0; i < MT753X_NUM_PHYS; i++) { - val = gsw->mii_read(gsw, i, MII_BMCR); - val |= BMCR_ISOLATE; - gsw->mii_write(gsw, i, MII_BMCR, val); - } - - /* Force MAC link down before reset */ - mt753x_reg_write(gsw, PMCR(5), FORCE_MODE_LNK); - mt753x_reg_write(gsw, PMCR(6), FORCE_MODE_LNK); - - /* Switch soft reset */ - mt753x_reg_write(gsw, SYS_CTRL, SW_SYS_RST | SW_REG_RST); - usleep_range(10, 20); - - /* Enable MDC input Schmitt Trigger */ - val = mt753x_reg_read(gsw, SMT0_IOLB); - mt753x_reg_write(gsw, SMT0_IOLB, val | SMT_IOLB_5_SMI_MDC_EN); - - /* Set 7531 gpio pinmux */ - mt7531_set_gpio_pinmux(gsw); - - /* Global mac control settings */ - mt753x_reg_write(gsw, GMACCR, - (15 << MTCC_LMT_S) | (11 << MAX_RX_JUMBO_S) | - RX_PKT_LEN_MAX_JUMBO); - - mt7531_core_pll_setup(gsw); - mt7531_mac_port_setup(gsw, 5, &gsw->port5_cfg); - mt7531_mac_port_setup(gsw, 6, &gsw->port6_cfg); - - return 0; -} - -static int mt7531_sw_post_init(struct gsw_mt753x *gsw) -{ - int i; - u32 val; - - mt7531_phy_pll_setup(gsw); - - /* Internal PHYs are disabled by default. SW should enable them. - * Note that this may already be enabled in bootloader stage. - */ - val = gsw->mmd_read(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403); - val |= PHY_EN_BYPASS_MODE; - val &= ~POWER_ON_OFF; - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val); - - mt7531_phy_setting(gsw); - - for (i = 0; i < MT753X_NUM_PHYS; i++) { - val = gsw->mii_read(gsw, i, MII_BMCR); - val &= ~BMCR_ISOLATE; - gsw->mii_write(gsw, i, MII_BMCR, val); - } - - for (i = 0; i < MT753X_NUM_PHYS; i++) - mt7531_adjust_line_driving(gsw, i); - - for (i = 0; i < MT753X_NUM_PHYS; i++) - mt7531_eee_setting(gsw, i); - - val = mt753x_reg_read(gsw, CHIP_REV); - val &= CHIP_REV_M; - if (val == CHIP_REV_E1) { - mt7531_internal_phy_calibration(gsw); - } else { - val = mt753x_reg_read(gsw, GBE_EFUSE); - if (val & GBE_SEL_EFUSE_EN) { - val = gsw->mmd_read(gsw, 0, PHY_DEV1F, - PHY_DEV1F_REG_403); - val &= ~GBE_EFUSE_SETTING; - gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, - val); - } else { - mt7531_internal_phy_calibration(gsw); - } - } - - return 0; -} - -struct mt753x_sw_id mt7531_id = { - .model = MT7531, - .detect = mt7531_sw_detect, - .init = mt7531_sw_init, - .post_init = mt7531_sw_post_init -}; - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Zhanguo Ju "); -MODULE_DESCRIPTION("Driver for MediaTek MT753x Gigabit Switch"); diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.h deleted file mode 100644 index 52c8a49fd3..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt7531.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - */ - -#ifndef _MT7531_H_ -#define _MT7531_H_ - -#include "mt753x.h" - -extern struct mt753x_sw_id mt7531_id; - -#endif /* _MT7531_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x.h deleted file mode 100644 index 837a415648..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x.h +++ /dev/null @@ -1,213 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#ifndef _MT753X_H_ -#define _MT753X_H_ - -#include -#include -#include -#include -#include -#include - -#ifdef CONFIG_SWCONFIG -#include -#endif - -#include "mt753x_vlan.h" - -#define MT753X_DFL_CPU_PORT 6 -#define MT753X_NUM_PHYS 5 - -#define MT753X_DFL_SMI_ADDR 0x1f -#define MT753X_SMI_ADDR_MASK 0x1f - -struct gsw_mt753x; - -enum mt753x_model { - MT7530 = 0x7530, - MT7531 = 0x7531 -}; - -struct mt753x_port_cfg { - struct device_node *np; - int phy_mode; - u32 enabled: 1; - u32 force_link: 1; - u32 speed: 2; - u32 duplex: 1; -}; - -struct mt753x_phy { - struct gsw_mt753x *gsw; - struct net_device netdev; - struct phy_device *phydev; -}; - -struct gsw_mt753x { - u32 id; - - struct device *dev; - struct mii_bus *host_bus; - struct mii_bus *gphy_bus; - struct mutex mii_lock; /* MII access lock */ - u32 smi_addr; - u32 phy_base; - int direct_phy_access; - - enum mt753x_model model; - const char *name; - - struct mt753x_port_cfg port5_cfg; - struct mt753x_port_cfg port6_cfg; - - int phy_status_poll; - struct mt753x_phy phys[MT753X_NUM_PHYS]; - - int phy_link_sts; - - int irq; - int reset_pin; - struct work_struct irq_worker; - -#ifdef CONFIG_SWCONFIG - struct switch_dev swdev; - u32 cpu_port; -#endif - - int global_vlan_enable; - struct mt753x_vlan_entry vlan_entries[MT753X_NUM_VLANS]; - struct mt753x_port_entry port_entries[MT753X_NUM_PORTS]; - - int (*mii_read)(struct gsw_mt753x *gsw, int phy, int reg); - void (*mii_write)(struct gsw_mt753x *gsw, int phy, int reg, u16 val); - - int (*mmd_read)(struct gsw_mt753x *gsw, int addr, int devad, u16 reg); - void (*mmd_write)(struct gsw_mt753x *gsw, int addr, int devad, u16 reg, - u16 val); - - struct list_head list; -}; - -struct chip_rev { - const char *name; - u32 rev; -}; - -struct mt753x_sw_id { - enum mt753x_model model; - int (*detect)(struct gsw_mt753x *gsw, struct chip_rev *crev); - int (*init)(struct gsw_mt753x *gsw); - int (*post_init)(struct gsw_mt753x *gsw); -}; - -extern struct list_head mt753x_devs; - -struct gsw_mt753x *mt753x_get_gsw(u32 id); -struct gsw_mt753x *mt753x_get_first_gsw(void); -void mt753x_put_gsw(void); -void mt753x_lock_gsw(void); - -u32 mt753x_reg_read(struct gsw_mt753x *gsw, u32 reg); -void mt753x_reg_write(struct gsw_mt753x *gsw, u32 reg, u32 val); - -int mt753x_mii_read(struct gsw_mt753x *gsw, int phy, int reg); -void mt753x_mii_write(struct gsw_mt753x *gsw, int phy, int reg, u16 val); - -int mt753x_mmd_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg); -void mt753x_mmd_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg, - u16 val); - -int mt753x_mmd_ind_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg); -void mt753x_mmd_ind_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg, - u16 val); - -void mt753x_irq_worker(struct work_struct *work); -void mt753x_irq_enable(struct gsw_mt753x *gsw); - -/* MDIO Indirect Access Registers */ -#define MII_MMD_ACC_CTL_REG 0x0d -#define MMD_CMD_S 14 -#define MMD_CMD_M 0xc000 -#define MMD_DEVAD_S 0 -#define MMD_DEVAD_M 0x1f - -/* MMD_CMD: MMD commands */ -#define MMD_ADDR 0 -#define MMD_DATA 1 - -#define MII_MMD_ADDR_DATA_REG 0x0e - -/* Procedure of MT753x Internal Register Access - * - * 1. Internal Register Address - * - * The MT753x has a 16-bit register address and each register is 32-bit. - * This means the lowest two bits are not used as the register address is - * 4-byte aligned. - * - * Rest of the valid bits are divided into two parts: - * Bit 15..6 is the Page address - * Bit 5..2 is the low address - * - * ------------------------------------------------------------------- - * | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 | - * |----------------------------------------|---------------|--------| - * | Page Address | Address | Unused | - * ------------------------------------------------------------------- - * - * 2. MDIO access timing - * - * The MT753x uses the following MDIO timing for a single register read - * - * Phase 1: Write Page Address - * ------------------------------------------------------------------- - * | ST | OP | PHY_ADDR | TYPE | RSVD | TA | RSVD | PAGE_ADDR | - * ------------------------------------------------------------------- - * | 01 | 01 | 11111 | 1 | 1111 | xx | 00000 | REG_ADDR[15..6] | - * ------------------------------------------------------------------- - * - * Phase 2: Write low Address & Read low word - * ------------------------------------------------------------------- - * | ST | OP | PHY_ADDR | TYPE | LOW_ADDR | TA | DATA | - * ------------------------------------------------------------------- - * | 01 | 10 | 11111 | 0 | REG_ADDR[5..2] | xx | DATA[15..0] | - * ------------------------------------------------------------------- - * - * Phase 3: Read high word - * ------------------------------------------------------------------- - * | ST | OP | PHY_ADDR | TYPE | RSVD | TA | DATA | - * ------------------------------------------------------------------- - * | 01 | 10 | 11111 | 1 | 0000 | xx | DATA[31..16] | - * ------------------------------------------------------------------- - * - * The MT753x uses the following MDIO timing for a single register write - * - * Phase 1: Write Page Address (The same as read) - * - * Phase 2: Write low Address and low word - * ------------------------------------------------------------------- - * | ST | OP | PHY_ADDR | TYPE | LOW_ADDR | TA | DATA | - * ------------------------------------------------------------------- - * | 01 | 01 | 11111 | 0 | REG_ADDR[5..2] | xx | DATA[15..0] | - * ------------------------------------------------------------------- - * - * Phase 3: write high word - * ------------------------------------------------------------------- - * | ST | OP | PHY_ADDR | TYPE | RSVD | TA | DATA | - * ------------------------------------------------------------------- - * | 01 | 01 | 11111 | 1 | 0000 | xx | DATA[31..16] | - * ------------------------------------------------------------------- - * - */ - -/* Internal Register Address fields */ -#define MT753X_REG_PAGE_ADDR_S 6 -#define MT753X_REG_PAGE_ADDR_M 0xffc0 -#define MT753X_REG_ADDR_S 2 -#define MT753X_REG_ADDR_M 0x3c -#endif /* _MT753X_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_common.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_common.c deleted file mode 100644 index 4015ddf125..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_common.c +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#include -#include - -#include "mt753x.h" -#include "mt753x_regs.h" - -void mt753x_irq_enable(struct gsw_mt753x *gsw) -{ - u32 val; - int i; - - /* Record initial PHY link status */ - for (i = 0; i < MT753X_NUM_PHYS; i++) { - val = gsw->mii_read(gsw, i, MII_BMSR); - if (val & BMSR_LSTATUS) - gsw->phy_link_sts |= BIT(i); - } - - val = BIT(MT753X_NUM_PHYS) - 1; - - mt753x_reg_write(gsw, SYS_INT_EN, val); -} - -static void display_port_link_status(struct gsw_mt753x *gsw, u32 port) -{ - u32 pmsr, speed_bits; - const char *speed; - - pmsr = mt753x_reg_read(gsw, PMSR(port)); - - speed_bits = (pmsr & MAC_SPD_STS_M) >> MAC_SPD_STS_S; - - switch (speed_bits) { - case MAC_SPD_10: - speed = "10Mbps"; - break; - case MAC_SPD_100: - speed = "100Mbps"; - break; - case MAC_SPD_1000: - speed = "1Gbps"; - break; - case MAC_SPD_2500: - speed = "2.5Gbps"; - break; - } - - if (pmsr & MAC_LNK_STS) { - dev_info(gsw->dev, "Port %d Link is Up - %s/%s\n", - port, speed, (pmsr & MAC_DPX_STS) ? "Full" : "Half"); - } else { - dev_info(gsw->dev, "Port %d Link is Down\n", port); - } -} - -void mt753x_irq_worker(struct work_struct *work) -{ - struct gsw_mt753x *gsw; - u32 sts, physts, laststs; - int i; - - gsw = container_of(work, struct gsw_mt753x, irq_worker); - - sts = mt753x_reg_read(gsw, SYS_INT_STS); - - /* Check for changed PHY link status */ - for (i = 0; i < MT753X_NUM_PHYS; i++) { - if (!(sts & PHY_LC_INT(i))) - continue; - - laststs = gsw->phy_link_sts & BIT(i); - physts = !!(gsw->mii_read(gsw, i, MII_BMSR) & BMSR_LSTATUS); - physts <<= i; - - if (physts ^ laststs) { - gsw->phy_link_sts ^= BIT(i); - display_port_link_status(gsw, i); - } - } - - mt753x_reg_write(gsw, SYS_INT_STS, sts); - - enable_irq(gsw->irq); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_mdio.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_mdio.c deleted file mode 100644 index a3f0c5d3f0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_mdio.c +++ /dev/null @@ -1,598 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mt753x.h" -#include "mt753x_swconfig.h" -#include "mt753x_regs.h" -#include "mt753x_nl.h" -#include "mt7530.h" -#include "mt7531.h" - -static u32 mt753x_id; -struct list_head mt753x_devs; -static DEFINE_MUTEX(mt753x_devs_lock); - -static struct mt753x_sw_id *mt753x_sw_ids[] = { - &mt7530_id, - &mt7531_id, -}; - -u32 mt753x_reg_read(struct gsw_mt753x *gsw, u32 reg) -{ - u32 high, low; - - mutex_lock(&gsw->host_bus->mdio_lock); - - gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, 0x1f, - (reg & MT753X_REG_PAGE_ADDR_M) >> MT753X_REG_PAGE_ADDR_S); - - low = gsw->host_bus->read(gsw->host_bus, gsw->smi_addr, - (reg & MT753X_REG_ADDR_M) >> MT753X_REG_ADDR_S); - - high = gsw->host_bus->read(gsw->host_bus, gsw->smi_addr, 0x10); - - mutex_unlock(&gsw->host_bus->mdio_lock); - - return (high << 16) | (low & 0xffff); -} - -void mt753x_reg_write(struct gsw_mt753x *gsw, u32 reg, u32 val) -{ - mutex_lock(&gsw->host_bus->mdio_lock); - - gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, 0x1f, - (reg & MT753X_REG_PAGE_ADDR_M) >> MT753X_REG_PAGE_ADDR_S); - - gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, - (reg & MT753X_REG_ADDR_M) >> MT753X_REG_ADDR_S, val & 0xffff); - - gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, 0x10, val >> 16); - - mutex_unlock(&gsw->host_bus->mdio_lock); -} - -/* Indirect MDIO clause 22/45 access */ -static int mt753x_mii_rw(struct gsw_mt753x *gsw, int phy, int reg, u16 data, - u32 cmd, u32 st) -{ - ktime_t timeout; - u32 val, timeout_us; - int ret = 0; - - timeout_us = 100000; - timeout = ktime_add_us(ktime_get(), timeout_us); - while (1) { - val = mt753x_reg_read(gsw, PHY_IAC); - - if ((val & PHY_ACS_ST) == 0) - break; - - if (ktime_compare(ktime_get(), timeout) > 0) - return -ETIMEDOUT; - } - - val = (st << MDIO_ST_S) | - ((cmd << MDIO_CMD_S) & MDIO_CMD_M) | - ((phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) | - ((reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M); - - if (cmd == MDIO_CMD_WRITE || cmd == MDIO_CMD_ADDR) - val |= data & MDIO_RW_DATA_M; - - mt753x_reg_write(gsw, PHY_IAC, val | PHY_ACS_ST); - - timeout_us = 100000; - timeout = ktime_add_us(ktime_get(), timeout_us); - while (1) { - val = mt753x_reg_read(gsw, PHY_IAC); - - if ((val & PHY_ACS_ST) == 0) - break; - - if (ktime_compare(ktime_get(), timeout) > 0) - return -ETIMEDOUT; - } - - if (cmd == MDIO_CMD_READ || cmd == MDIO_CMD_READ_C45) { - val = mt753x_reg_read(gsw, PHY_IAC); - ret = val & MDIO_RW_DATA_M; - } - - return ret; -} - -int mt753x_mii_read(struct gsw_mt753x *gsw, int phy, int reg) -{ - int val; - - if (phy < MT753X_NUM_PHYS) - phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->mii_lock); - val = mt753x_mii_rw(gsw, phy, reg, 0, MDIO_CMD_READ, MDIO_ST_C22); - mutex_unlock(&gsw->mii_lock); - - return val; -} - -void mt753x_mii_write(struct gsw_mt753x *gsw, int phy, int reg, u16 val) -{ - if (phy < MT753X_NUM_PHYS) - phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->mii_lock); - mt753x_mii_rw(gsw, phy, reg, val, MDIO_CMD_WRITE, MDIO_ST_C22); - mutex_unlock(&gsw->mii_lock); -} - -int mt753x_mmd_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg) -{ - int val; - - if (addr < MT753X_NUM_PHYS) - addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->mii_lock); - mt753x_mii_rw(gsw, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45); - val = mt753x_mii_rw(gsw, addr, devad, 0, MDIO_CMD_READ_C45, - MDIO_ST_C45); - mutex_unlock(&gsw->mii_lock); - - return val; -} - -void mt753x_mmd_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg, - u16 val) -{ - if (addr < MT753X_NUM_PHYS) - addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->mii_lock); - mt753x_mii_rw(gsw, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45); - mt753x_mii_rw(gsw, addr, devad, val, MDIO_CMD_WRITE, MDIO_ST_C45); - mutex_unlock(&gsw->mii_lock); -} - -int mt753x_mmd_ind_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg) -{ - u16 val; - - if (addr < MT753X_NUM_PHYS) - addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->mii_lock); - - mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG, - (MMD_ADDR << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M), - MDIO_CMD_WRITE, MDIO_ST_C22); - - mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, reg, - MDIO_CMD_WRITE, MDIO_ST_C22); - - mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG, - (MMD_DATA << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M), - MDIO_CMD_WRITE, MDIO_ST_C22); - - val = mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, 0, - MDIO_CMD_READ, MDIO_ST_C22); - - mutex_unlock(&gsw->mii_lock); - - return val; -} - -void mt753x_mmd_ind_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg, - u16 val) -{ - if (addr < MT753X_NUM_PHYS) - addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK; - - mutex_lock(&gsw->mii_lock); - - mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG, - (MMD_ADDR << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M), - MDIO_CMD_WRITE, MDIO_ST_C22); - - mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, reg, - MDIO_CMD_WRITE, MDIO_ST_C22); - - mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG, - (MMD_DATA << MMD_CMD_S) | - ((devad << MMD_DEVAD_S) & MMD_DEVAD_M), - MDIO_CMD_WRITE, MDIO_ST_C22); - - mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, val, - MDIO_CMD_WRITE, MDIO_ST_C22); - - mutex_unlock(&gsw->mii_lock); -} - -static inline int mt753x_get_duplex(const struct device_node *np) -{ - return of_property_read_bool(np, "full-duplex"); -} - -static void mt753x_load_port_cfg(struct gsw_mt753x *gsw) -{ - struct device_node *port_np; - struct device_node *fixed_link_node; - struct mt753x_port_cfg *port_cfg; - u32 port; - - for_each_child_of_node(gsw->dev->of_node, port_np) { - if (!of_device_is_compatible(port_np, "mediatek,mt753x-port")) - continue; - - if (!of_device_is_available(port_np)) - continue; - - if (of_property_read_u32(port_np, "reg", &port)) - continue; - - switch (port) { - case 5: - port_cfg = &gsw->port5_cfg; - break; - case 6: - port_cfg = &gsw->port6_cfg; - break; - default: - continue; - } - - if (port_cfg->enabled) { - dev_info(gsw->dev, "duplicated node for port%d\n", - port_cfg->phy_mode); - continue; - } - - port_cfg->np = port_np; - - port_cfg->phy_mode = of_get_phy_mode(port_np); - if (port_cfg->phy_mode < 0) { - dev_info(gsw->dev, "incorrect phy-mode %d\n", port); - continue; - } - - fixed_link_node = of_get_child_by_name(port_np, "fixed-link"); - if (fixed_link_node) { - u32 speed; - - port_cfg->force_link = 1; - port_cfg->duplex = mt753x_get_duplex(fixed_link_node); - - if (of_property_read_u32(fixed_link_node, "speed", - &speed)) { - speed = 0; - continue; - } - - of_node_put(fixed_link_node); - - switch (speed) { - case 10: - port_cfg->speed = MAC_SPD_10; - break; - case 100: - port_cfg->speed = MAC_SPD_100; - break; - case 1000: - port_cfg->speed = MAC_SPD_1000; - break; - case 2500: - port_cfg->speed = MAC_SPD_2500; - break; - default: - dev_info(gsw->dev, "incorrect speed %d\n", - speed); - continue; - } - } - - port_cfg->enabled = 1; - } -} - -static void mt753x_add_gsw(struct gsw_mt753x *gsw) -{ - mutex_lock(&mt753x_devs_lock); - gsw->id = mt753x_id++; - INIT_LIST_HEAD(&gsw->list); - list_add_tail(&gsw->list, &mt753x_devs); - mutex_unlock(&mt753x_devs_lock); -} - -static void mt753x_remove_gsw(struct gsw_mt753x *gsw) -{ - mutex_lock(&mt753x_devs_lock); - list_del(&gsw->list); - mutex_unlock(&mt753x_devs_lock); -} - - -struct gsw_mt753x *mt753x_get_gsw(u32 id) -{ - struct gsw_mt753x *dev; - - mutex_lock(&mt753x_devs_lock); - - list_for_each_entry(dev, &mt753x_devs, list) { - if (dev->id == id) - return dev; - } - - mutex_unlock(&mt753x_devs_lock); - - return NULL; -} - -struct gsw_mt753x *mt753x_get_first_gsw(void) -{ - struct gsw_mt753x *dev; - - mutex_lock(&mt753x_devs_lock); - - list_for_each_entry(dev, &mt753x_devs, list) - return dev; - - mutex_unlock(&mt753x_devs_lock); - - return NULL; -} - -void mt753x_put_gsw(void) -{ - mutex_unlock(&mt753x_devs_lock); -} - -void mt753x_lock_gsw(void) -{ - mutex_lock(&mt753x_devs_lock); -} - -static int mt753x_hw_reset(struct gsw_mt753x *gsw) -{ - struct device_node *np = gsw->dev->of_node; - struct reset_control *rstc; - int mcm; - int ret = -EINVAL; - - mcm = of_property_read_bool(np, "mediatek,mcm"); - if (mcm) { - rstc = devm_reset_control_get(gsw->dev, "mcm"); - ret = IS_ERR(rstc); - if (IS_ERR(rstc)) { - dev_err(gsw->dev, "Missing reset ctrl of switch\n"); - return ret; - } - - reset_control_assert(rstc); - msleep(30); - reset_control_deassert(rstc); - - gsw->reset_pin = -1; - return 0; - } - - gsw->reset_pin = of_get_named_gpio(np, "reset-gpios", 0); - if (gsw->reset_pin < 0) { - dev_err(gsw->dev, "Missing reset pin of switch\n"); - return ret; - } - - ret = devm_gpio_request(gsw->dev, gsw->reset_pin, "mt753x-reset"); - if (ret) { - dev_info(gsw->dev, "Failed to request gpio %d\n", - gsw->reset_pin); - return ret; - } - - gpio_direction_output(gsw->reset_pin, 0); - msleep(30); - gpio_set_value(gsw->reset_pin, 1); - msleep(500); - - return 0; -} - -static irqreturn_t mt753x_irq_handler(int irq, void *dev) -{ - struct gsw_mt753x *gsw = dev; - - disable_irq_nosync(gsw->irq); - - schedule_work(&gsw->irq_worker); - - return IRQ_HANDLED; -} - -static int mt753x_probe(struct platform_device *pdev) -{ - struct gsw_mt753x *gsw; - struct mt753x_sw_id *sw; - struct device_node *np = pdev->dev.of_node; - struct device_node *mdio; - struct mii_bus *mdio_bus; - int ret = -EINVAL; - struct chip_rev rev; - struct mt753x_mapping *map; - int i; - - mdio = of_parse_phandle(np, "mediatek,mdio", 0); - if (!mdio) - return -EINVAL; - - mdio_bus = of_mdio_find_bus(mdio); - if (!mdio_bus) - return -EPROBE_DEFER; - - gsw = devm_kzalloc(&pdev->dev, sizeof(struct gsw_mt753x), GFP_KERNEL); - if (!gsw) - return -ENOMEM; - - gsw->host_bus = mdio_bus; - gsw->dev = &pdev->dev; - mutex_init(&gsw->mii_lock); - - /* Switch hard reset */ - if (mt753x_hw_reset(gsw)) - goto fail; - - /* Fetch the SMI address dirst */ - if (of_property_read_u32(np, "mediatek,smi-addr", &gsw->smi_addr)) - gsw->smi_addr = MT753X_DFL_SMI_ADDR; - - /* Get LAN/WAN port mapping */ - map = mt753x_find_mapping(np); - if (map) { - mt753x_apply_mapping(gsw, map); - gsw->global_vlan_enable = 1; - dev_info(gsw->dev, "LAN/WAN VLAN setting=%s\n", map->name); - } - - /* Load MAC port configurations */ - mt753x_load_port_cfg(gsw); - - /* Check for valid switch and then initialize */ - for (i = 0; i < ARRAY_SIZE(mt753x_sw_ids); i++) { - if (!mt753x_sw_ids[i]->detect(gsw, &rev)) { - sw = mt753x_sw_ids[i]; - - gsw->name = rev.name; - gsw->model = sw->model; - - dev_info(gsw->dev, "Switch is MediaTek %s rev %d", - gsw->name, rev.rev); - - /* Initialize the switch */ - ret = sw->init(gsw); - if (ret) - goto fail; - - break; - } - } - - if (i >= ARRAY_SIZE(mt753x_sw_ids)) { - dev_err(gsw->dev, "No mt753x switch found\n"); - goto fail; - } - - gsw->irq = platform_get_irq(pdev, 0); - if (gsw->irq >= 0) { - ret = devm_request_irq(gsw->dev, gsw->irq, mt753x_irq_handler, - 0, dev_name(gsw->dev), gsw); - if (ret) { - dev_err(gsw->dev, "Failed to request irq %d\n", - gsw->irq); - goto fail; - } - - INIT_WORK(&gsw->irq_worker, mt753x_irq_worker); - } - - platform_set_drvdata(pdev, gsw); - - gsw->phy_status_poll = of_property_read_bool(gsw->dev->of_node, - "mediatek,phy-poll"); - - mt753x_add_gsw(gsw); - - mt753x_swconfig_init(gsw); - - if (sw->post_init) - sw->post_init(gsw); - - if (gsw->irq >= 0) - mt753x_irq_enable(gsw); - - return 0; - -fail: - devm_kfree(&pdev->dev, gsw); - - return ret; -} - -static int mt753x_remove(struct platform_device *pdev) -{ - struct gsw_mt753x *gsw = platform_get_drvdata(pdev); - - if (gsw->irq >= 0) - cancel_work_sync(&gsw->irq_worker); - - if (gsw->reset_pin >= 0) - devm_gpio_free(&pdev->dev, gsw->reset_pin); - -#ifdef CONFIG_SWCONFIG - mt753x_swconfig_destroy(gsw); -#endif - - mt753x_remove_gsw(gsw); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static const struct of_device_id mt753x_ids[] = { - { .compatible = "mediatek,mt753x" }, - { }, -}; - -MODULE_DEVICE_TABLE(of, mt753x_ids); - -static struct platform_driver mt753x_driver = { - .probe = mt753x_probe, - .remove = mt753x_remove, - .driver = { - .name = "mt753x", - .of_match_table = mt753x_ids, - }, -}; - -static int __init mt753x_init(void) -{ - int ret; - - INIT_LIST_HEAD(&mt753x_devs); - ret = platform_driver_register(&mt753x_driver); - - mt753x_nl_init(); - - return ret; -} -module_init(mt753x_init); - -static void __exit mt753x_exit(void) -{ - mt753x_nl_exit(); - - platform_driver_unregister(&mt753x_driver); -} -module_exit(mt753x_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Weijie Gao "); -MODULE_DESCRIPTION("Driver for MediaTek MT753x Gigabit Switch"); diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_nl.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_nl.c deleted file mode 100644 index ccde2c9209..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_nl.c +++ /dev/null @@ -1,382 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Sirui Zhao - */ - -#include -#include -#include -#include -#include - -#include "mt753x.h" -#include "mt753x_nl.h" - -struct mt753x_nl_cmd_item { - enum mt753x_cmd cmd; - bool require_dev; - int (*process)(struct genl_info *info, struct gsw_mt753x *gsw); - u32 nr_required_attrs; - const enum mt753x_attr *required_attrs; -}; - -static int mt753x_nl_response(struct sk_buff *skb, struct genl_info *info); - -/* -static const struct nla_policy mt753x_nl_cmd_policy[] = { - [MT753X_ATTR_TYPE_MESG] = { .type = NLA_STRING }, - [MT753X_ATTR_TYPE_PHY] = { .type = NLA_S32 }, - [MT753X_ATTR_TYPE_REG] = { .type = NLA_S32 }, - [MT753X_ATTR_TYPE_VAL] = { .type = NLA_S32 }, - [MT753X_ATTR_TYPE_DEV_NAME] = { .type = NLA_S32 }, - [MT753X_ATTR_TYPE_DEV_ID] = { .type = NLA_S32 }, - [MT753X_ATTR_TYPE_DEVAD] = { .type = NLA_S32 }, -}; -*/ - -static const struct genl_ops mt753x_nl_ops[] = { - { - .cmd = MT753X_CMD_REQUEST, - .doit = mt753x_nl_response, -// .policy = mt753x_nl_cmd_policy, - .flags = GENL_ADMIN_PERM, - }, { - .cmd = MT753X_CMD_READ, - .doit = mt753x_nl_response, -// .policy = mt753x_nl_cmd_policy, - .flags = GENL_ADMIN_PERM, - }, { - .cmd = MT753X_CMD_WRITE, - .doit = mt753x_nl_response, -// .policy = mt753x_nl_cmd_policy, - .flags = GENL_ADMIN_PERM, - }, -}; - -static struct genl_family mt753x_nl_family = { - .name = MT753X_GENL_NAME, - .version = MT753X_GENL_VERSION, - .maxattr = MT753X_NR_ATTR_TYPE, - .ops = mt753x_nl_ops, - .n_ops = ARRAY_SIZE(mt753x_nl_ops), -}; - -static int mt753x_nl_list_devs(char *buff, int size) -{ - struct gsw_mt753x *gsw; - int len, total = 0; - char buf[80]; - - memset(buff, 0, size); - - mt753x_lock_gsw(); - - list_for_each_entry(gsw, &mt753x_devs, list) { - len = snprintf(buf, sizeof(buf), - "id: %d, model: %s, node: %s\n", - gsw->id, gsw->name, gsw->dev->of_node->name); - strncat(buff, buf, size - total); - total += len; - } - - mt753x_put_gsw(); - - return total; -} - -static int mt753x_nl_prepare_reply(struct genl_info *info, u8 cmd, - struct sk_buff **skbp) -{ - struct sk_buff *msg; - void *reply; - - if (!info) - return -EINVAL; - - msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); - if (!msg) - return -ENOMEM; - - /* Construct send-back message header */ - reply = genlmsg_put(msg, info->snd_portid, info->snd_seq, - &mt753x_nl_family, 0, cmd); - if (!reply) { - nlmsg_free(msg); - return -EINVAL; - } - - *skbp = msg; - return 0; -} - -static int mt753x_nl_send_reply(struct sk_buff *skb, struct genl_info *info) -{ - struct genlmsghdr *genlhdr = nlmsg_data(nlmsg_hdr(skb)); - void *reply = genlmsg_data(genlhdr); - - /* Finalize a generic netlink message (update message header) */ - genlmsg_end(skb, reply); - - /* reply to a request */ - return genlmsg_reply(skb, info); -} - -static s32 mt753x_nl_get_s32(struct genl_info *info, enum mt753x_attr attr, - s32 defval) -{ - struct nlattr *na; - - na = info->attrs[attr]; - if (na) - return nla_get_s32(na); - - return defval; -} - -static int mt753x_nl_get_u32(struct genl_info *info, enum mt753x_attr attr, - u32 *val) -{ - struct nlattr *na; - - na = info->attrs[attr]; - if (na) { - *val = nla_get_u32(na); - return 0; - } - - return -1; -} - -static struct gsw_mt753x *mt753x_nl_parse_find_gsw(struct genl_info *info) -{ - struct gsw_mt753x *gsw; - struct nlattr *na; - int gsw_id; - - na = info->attrs[MT753X_ATTR_TYPE_DEV_ID]; - if (na) { - gsw_id = nla_get_s32(na); - if (gsw_id >= 0) - gsw = mt753x_get_gsw(gsw_id); - else - gsw = mt753x_get_first_gsw(); - } else { - gsw = mt753x_get_first_gsw(); - } - - return gsw; -} - -static int mt753x_nl_get_swdevs(struct genl_info *info, struct gsw_mt753x *gsw) -{ - struct sk_buff *rep_skb = NULL; - char dev_info[512]; - int ret; - - ret = mt753x_nl_list_devs(dev_info, sizeof(dev_info)); - if (!ret) { - pr_info("No switch registered\n"); - return -EINVAL; - } - - ret = mt753x_nl_prepare_reply(info, MT753X_CMD_REPLY, &rep_skb); - if (ret < 0) - goto err; - - ret = nla_put_string(rep_skb, MT753X_ATTR_TYPE_MESG, dev_info); - if (ret < 0) - goto err; - - return mt753x_nl_send_reply(rep_skb, info); - -err: - if (rep_skb) - nlmsg_free(rep_skb); - - return ret; -} - -static int mt753x_nl_reply_read(struct genl_info *info, struct gsw_mt753x *gsw) -{ - struct sk_buff *rep_skb = NULL; - s32 phy, devad, reg; - int value; - int ret = 0; - - phy = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_PHY, -1); - devad = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_DEVAD, -1); - reg = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_REG, -1); - - if (reg < 0) - goto err; - - ret = mt753x_nl_prepare_reply(info, MT753X_CMD_READ, &rep_skb); - if (ret < 0) - goto err; - - if (phy >= 0) { - if (devad < 0) - value = gsw->mii_read(gsw, phy, reg); - else - value = gsw->mmd_read(gsw, phy, devad, reg); - } else { - value = mt753x_reg_read(gsw, reg); - } - - ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_REG, reg); - if (ret < 0) - goto err; - - ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_VAL, value); - if (ret < 0) - goto err; - - return mt753x_nl_send_reply(rep_skb, info); - -err: - if (rep_skb) - nlmsg_free(rep_skb); - - return ret; -} - -static int mt753x_nl_reply_write(struct genl_info *info, struct gsw_mt753x *gsw) -{ - struct sk_buff *rep_skb = NULL; - s32 phy, devad, reg; - u32 value; - int ret = 0; - - phy = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_PHY, -1); - devad = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_DEVAD, -1); - reg = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_REG, -1); - - if (mt753x_nl_get_u32(info, MT753X_ATTR_TYPE_VAL, &value)) - goto err; - - if (reg < 0) - goto err; - - ret = mt753x_nl_prepare_reply(info, MT753X_CMD_WRITE, &rep_skb); - if (ret < 0) - goto err; - - if (phy >= 0) { - if (devad < 0) - gsw->mii_write(gsw, phy, reg, value); - else - gsw->mmd_write(gsw, phy, devad, reg, value); - } else { - mt753x_reg_write(gsw, reg, value); - } - - ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_REG, reg); - if (ret < 0) - goto err; - - ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_VAL, value); - if (ret < 0) - goto err; - - return mt753x_nl_send_reply(rep_skb, info); - -err: - if (rep_skb) - nlmsg_free(rep_skb); - - return ret; -} - -static const enum mt753x_attr mt753x_nl_cmd_read_attrs[] = { - MT753X_ATTR_TYPE_REG -}; - -static const enum mt753x_attr mt753x_nl_cmd_write_attrs[] = { - MT753X_ATTR_TYPE_REG, - MT753X_ATTR_TYPE_VAL -}; - -static const struct mt753x_nl_cmd_item mt753x_nl_cmds[] = { - { - .cmd = MT753X_CMD_REQUEST, - .require_dev = false, - .process = mt753x_nl_get_swdevs - }, { - .cmd = MT753X_CMD_READ, - .require_dev = true, - .process = mt753x_nl_reply_read, - .required_attrs = mt753x_nl_cmd_read_attrs, - .nr_required_attrs = ARRAY_SIZE(mt753x_nl_cmd_read_attrs), - }, { - .cmd = MT753X_CMD_WRITE, - .require_dev = true, - .process = mt753x_nl_reply_write, - .required_attrs = mt753x_nl_cmd_write_attrs, - .nr_required_attrs = ARRAY_SIZE(mt753x_nl_cmd_write_attrs), - } -}; - -static int mt753x_nl_response(struct sk_buff *skb, struct genl_info *info) -{ - struct genlmsghdr *hdr = nlmsg_data(info->nlhdr); - const struct mt753x_nl_cmd_item *cmditem = NULL; - struct gsw_mt753x *gsw = NULL; - u32 sat_req_attrs = 0; - int i, ret; - - for (i = 0; i < ARRAY_SIZE(mt753x_nl_cmds); i++) { - if (hdr->cmd == mt753x_nl_cmds[i].cmd) { - cmditem = &mt753x_nl_cmds[i]; - break; - } - } - - if (!cmditem) { - pr_info("mt753x-nl: unknown cmd %u\n", hdr->cmd); - return -EINVAL; - } - - for (i = 0; i < cmditem->nr_required_attrs; i++) { - if (info->attrs[cmditem->required_attrs[i]]) - sat_req_attrs++; - } - - if (sat_req_attrs != cmditem->nr_required_attrs) { - pr_info("mt753x-nl: missing required attr(s) for cmd %u\n", - hdr->cmd); - return -EINVAL; - } - - if (cmditem->require_dev) { - gsw = mt753x_nl_parse_find_gsw(info); - if (!gsw) { - pr_info("mt753x-nl: failed to find switch dev\n"); - return -EINVAL; - } - } - - ret = cmditem->process(info, gsw); - - mt753x_put_gsw(); - - return ret; -} - -int __init mt753x_nl_init(void) -{ - int ret; - - ret = genl_register_family(&mt753x_nl_family); - if (ret) { - pr_info("mt753x-nl: genl_register_family_with_ops failed\n"); - return ret; - } - - return 0; -} - -void __exit mt753x_nl_exit(void) -{ - genl_unregister_family(&mt753x_nl_family); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_nl.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_nl.h deleted file mode 100644 index 85dc9e791a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_nl.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Sirui Zhao - */ - -#ifndef _MT753X_NL_H_ -#define _MT753X_NL_H_ - -#define MT753X_GENL_NAME "mt753x" -#define MT753X_GENL_VERSION 0x1 - -enum mt753x_cmd { - MT753X_CMD_UNSPEC = 0, - MT753X_CMD_REQUEST, - MT753X_CMD_REPLY, - MT753X_CMD_READ, - MT753X_CMD_WRITE, - - __MT753X_CMD_MAX, -}; - -enum mt753x_attr { - MT753X_ATTR_TYPE_UNSPEC = 0, - MT753X_ATTR_TYPE_MESG, - MT753X_ATTR_TYPE_PHY, - MT753X_ATTR_TYPE_DEVAD, - MT753X_ATTR_TYPE_REG, - MT753X_ATTR_TYPE_VAL, - MT753X_ATTR_TYPE_DEV_NAME, - MT753X_ATTR_TYPE_DEV_ID, - - __MT753X_ATTR_TYPE_MAX, -}; - -#define MT753X_NR_ATTR_TYPE (__MT753X_ATTR_TYPE_MAX - 1) - -#ifdef __KERNEL__ -int __init mt753x_nl_init(void); -void __exit mt753x_nl_exit(void); -#endif /* __KERNEL__ */ - -#endif /* _MT753X_NL_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_regs.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_regs.h deleted file mode 100644 index 3f23ae200e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_regs.h +++ /dev/null @@ -1,294 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#ifndef _MT753X_REGS_H_ -#define _MT753X_REGS_H_ - -#include - -/* Values of Egress TAG Control */ -#define ETAG_CTRL_UNTAG 0 -#define ETAG_CTRL_TAG 2 -#define ETAG_CTRL_SWAP 1 -#define ETAG_CTRL_STACK 3 - -#define VTCR 0x90 -#define VAWD1 0x94 -#define VAWD2 0x98 - -/* Fields of VTCR */ -#define VTCR_BUSY BIT(31) -#define IDX_INVLD BIT(16) -#define VTCR_FUNC_S 12 -#define VTCR_FUNC_M 0xf000 -#define VTCR_VID_S 0 -#define VTCR_VID_M 0xfff - -/* Values of VTCR_FUNC */ -#define VTCR_READ_VLAN_ENTRY 0 -#define VTCR_WRITE_VLAN_ENTRY 1 -#define VTCR_INVD_VLAN_ENTRY 2 -#define VTCR_ENABLE_VLAN_ENTRY 3 -#define VTCR_READ_ACL_ENTRY 4 -#define VTCR_WRITE_ACL_ENTRY 5 -#define VTCR_READ_TRTCM_TABLE 6 -#define VTCR_WRITE_TRTCM_TABLE 7 -#define VTCR_READ_ACL_MASK_ENTRY 8 -#define VTCR_WRITE_ACL_MASK_ENTRY 9 -#define VTCR_READ_ACL_RULE_ENTRY 10 -#define VTCR_WRITE_ACL_RULE_ENTRY 11 -#define VTCR_READ_ACL_RATE_ENTRY 12 -#define VTCR_WRITE_ACL_RATE_ENTRY 13 - -/* VLAN entry fields */ -/* VAWD1 */ -#define PORT_STAG BIT(31) -#define IVL_MAC BIT(30) -#define EG_CON BIT(29) -#define VTAG_EN BIT(28) -#define COPY_PRI BIT(27) -#define USER_PRI_S 24 -#define USER_PRI_M 0x7000000 -#define PORT_MEM_S 16 -#define PORT_MEM_M 0xff0000 -#define S_TAG1_S 4 -#define S_TAG1_M 0xfff0 -#define FID_S 1 -#define FID_M 0x0e -#define VENTRY_VALID BIT(0) - -/* VAWD2 */ -#define S_TAG2_S 16 -#define S_TAG2_M 0xffff0000 -#define PORT_ETAG_S(p) ((p) * 2) -#define PORT_ETAG_M 0x03 - -#define PORT_CTRL_BASE 0x2000 -#define PORT_CTRL_PORT_OFFSET 0x100 -#define PORT_CTRL_REG(p, r) (PORT_CTRL_BASE + \ - (p) * PORT_CTRL_PORT_OFFSET + (r)) -#define CKGCR(p) PORT_CTRL_REG(p, 0x00) -#define PCR(p) PORT_CTRL_REG(p, 0x04) -#define PIC(p) PORT_CTRL_REG(p, 0x08) -#define PSC(p) PORT_CTRL_REG(p, 0x0c) -#define PVC(p) PORT_CTRL_REG(p, 0x10) -#define PPBV1(p) PORT_CTRL_REG(p, 0x14) -#define PPBV2(p) PORT_CTRL_REG(p, 0x18) -#define BSR(p) PORT_CTRL_REG(p, 0x1c) -#define STAG01 PORT_CTRL_REG(p, 0x20) -#define STAG23 PORT_CTRL_REG(p, 0x24) -#define STAG45 PORT_CTRL_REG(p, 0x28) -#define STAG67 PORT_CTRL_REG(p, 0x2c) - -#define PPBV(p, g) (PPBV1(p) + ((g) / 2) * 4) - -/* Fields of PCR */ -#define MLDV2_EN BIT(30) -#define EG_TAG_S 28 -#define EG_TAG_M 0x30000000 -#define PORT_PRI_S 24 -#define PORT_PRI_M 0x7000000 -#define PORT_MATRIX_S 16 -#define PORT_MATRIX_M 0xff0000 -#define UP2DSCP_EN BIT(12) -#define UP2TAG_EN BIT(11) -#define ACL_EN BIT(10) -#define PORT_TX_MIR BIT(9) -#define PORT_RX_MIR BIT(8) -#define ACL_MIR BIT(7) -#define MIS_PORT_FW_S 4 -#define MIS_PORT_FW_M 0x70 -#define VLAN_MIS BIT(2) -#define PORT_VLAN_S 0 -#define PORT_VLAN_M 0x03 - -/* Values of PORT_VLAN */ -#define PORT_MATRIX_MODE 0 -#define FALLBACK_MODE 1 -#define CHECK_MODE 2 -#define SECURITY_MODE 3 - -/* Fields of PVC */ -#define STAG_VPID_S 16 -#define STAG_VPID_M 0xffff0000 -#define DIS_PVID BIT(15) -#define FORCE_PVID BIT(14) -#define PT_VPM BIT(12) -#define PT_OPTION BIT(11) -#define PVC_EG_TAG_S 8 -#define PVC_EG_TAG_M 0x700 -#define VLAN_ATTR_S 6 -#define VLAN_ATTR_M 0xc0 -#define PVC_PORT_STAG BIT(5) -#define BC_LKYV_EN BIT(4) -#define MC_LKYV_EN BIT(3) -#define UC_LKYV_EN BIT(2) -#define ACC_FRM_S 0 -#define ACC_FRM_M 0x03 - -/* Values of VLAN_ATTR */ -#define VA_USER_PORT 0 -#define VA_STACK_PORT 1 -#define VA_TRANSLATION_PORT 2 -#define VA_TRANSPARENT_PORT 3 - -/* Fields of PPBV */ -#define GRP_PORT_PRI_S(g) (((g) % 2) * 16 + 13) -#define GRP_PORT_PRI_M 0x07 -#define GRP_PORT_VID_S(g) (((g) % 2) * 16) -#define GRP_PORT_VID_M 0xfff - -#define PORT_MAC_CTRL_BASE 0x3000 -#define PORT_MAC_CTRL_PORT_OFFSET 0x100 -#define PORT_MAC_CTRL_REG(p, r) (PORT_MAC_CTRL_BASE + \ - (p) * PORT_MAC_CTRL_PORT_OFFSET + (r)) -#define PMCR(p) PORT_MAC_CTRL_REG(p, 0x00) -#define PMEEECR(p) PORT_MAC_CTRL_REG(p, 0x04) -#define PMSR(p) PORT_MAC_CTRL_REG(p, 0x08) -#define PINT_EN(p) PORT_MAC_CTRL_REG(p, 0x10) -#define PINT_STS(p) PORT_MAC_CTRL_REG(p, 0x14) - -#define GMACCR (PORT_MAC_CTRL_BASE + 0xe0) -#define TXCRC_EN BIT(19) -#define RXCRC_EN BIT(18) -#define PRMBL_LMT_EN BIT(17) -#define MTCC_LMT_S 9 -#define MTCC_LMT_M 0x1e00 -#define MAX_RX_JUMBO_S 2 -#define MAX_RX_JUMBO_M 0x3c -#define MAX_RX_PKT_LEN_S 0 -#define MAX_RX_PKT_LEN_M 0x3 - -/* Values of MAX_RX_PKT_LEN */ -#define RX_PKT_LEN_1518 0 -#define RX_PKT_LEN_1536 1 -#define RX_PKT_LEN_1522 2 -#define RX_PKT_LEN_MAX_JUMBO 3 - -/* Fields of PMCR */ -#define IPG_CFG_S 18 -#define IPG_CFG_M 0xc0000 -#define EXT_PHY BIT(17) -#define MAC_MODE BIT(16) -#define MAC_TX_EN BIT(14) -#define MAC_RX_EN BIT(13) -#define MAC_PRE BIT(11) -#define BKOFF_EN BIT(9) -#define BACKPR_EN BIT(8) -#define FORCE_EEE1G BIT(7) -#define FORCE_EEE1000 BIT(6) -#define FORCE_RX_FC BIT(5) -#define FORCE_TX_FC BIT(4) -#define FORCE_SPD_S 2 -#define FORCE_SPD_M 0x0c -#define FORCE_DPX BIT(1) -#define FORCE_LINK BIT(0) - -/* Fields of PMSR */ -#define EEE1G_STS BIT(7) -#define EEE100_STS BIT(6) -#define RX_FC_STS BIT(5) -#define TX_FC_STS BIT(4) -#define MAC_SPD_STS_S 2 -#define MAC_SPD_STS_M 0x0c -#define MAC_DPX_STS BIT(1) -#define MAC_LNK_STS BIT(0) - -/* Values of MAC_SPD_STS */ -#define MAC_SPD_10 0 -#define MAC_SPD_100 1 -#define MAC_SPD_1000 2 -#define MAC_SPD_2500 3 - -/* Values of IPG_CFG */ -#define IPG_96BIT 0 -#define IPG_96BIT_WITH_SHORT_IPG 1 -#define IPG_64BIT 2 - -#define MIB_COUNTER_BASE 0x4000 -#define MIB_COUNTER_PORT_OFFSET 0x100 -#define MIB_COUNTER_REG(p, r) (MIB_COUNTER_BASE + \ - (p) * MIB_COUNTER_PORT_OFFSET + (r)) -#define STATS_TDPC 0x00 -#define STATS_TCRC 0x04 -#define STATS_TUPC 0x08 -#define STATS_TMPC 0x0C -#define STATS_TBPC 0x10 -#define STATS_TCEC 0x14 -#define STATS_TSCEC 0x18 -#define STATS_TMCEC 0x1C -#define STATS_TDEC 0x20 -#define STATS_TLCEC 0x24 -#define STATS_TXCEC 0x28 -#define STATS_TPPC 0x2C -#define STATS_TL64PC 0x30 -#define STATS_TL65PC 0x34 -#define STATS_TL128PC 0x38 -#define STATS_TL256PC 0x3C -#define STATS_TL512PC 0x40 -#define STATS_TL1024PC 0x44 -#define STATS_TOC 0x48 -#define STATS_RDPC 0x60 -#define STATS_RFPC 0x64 -#define STATS_RUPC 0x68 -#define STATS_RMPC 0x6C -#define STATS_RBPC 0x70 -#define STATS_RAEPC 0x74 -#define STATS_RCEPC 0x78 -#define STATS_RUSPC 0x7C -#define STATS_RFEPC 0x80 -#define STATS_ROSPC 0x84 -#define STATS_RJEPC 0x88 -#define STATS_RPPC 0x8C -#define STATS_RL64PC 0x90 -#define STATS_RL65PC 0x94 -#define STATS_RL128PC 0x98 -#define STATS_RL256PC 0x9C -#define STATS_RL512PC 0xA0 -#define STATS_RL1024PC 0xA4 -#define STATS_ROC 0xA8 -#define STATS_RDPC_CTRL 0xB0 -#define STATS_RDPC_ING 0xB4 -#define STATS_RDPC_ARL 0xB8 - -#define SYS_CTRL 0x7000 -#define SW_PHY_RST BIT(2) -#define SW_SYS_RST BIT(1) -#define SW_REG_RST BIT(0) - -#define SYS_INT_EN 0x7008 -#define SYS_INT_STS 0x700c -#define MAC_PC_INT BIT(16) -#define PHY_INT(p) BIT((p) + 8) -#define PHY_LC_INT(p) BIT(p) - -#define PHY_IAC 0x701c -#define PHY_ACS_ST BIT(31) -#define MDIO_REG_ADDR_S 25 -#define MDIO_REG_ADDR_M 0x3e000000 -#define MDIO_PHY_ADDR_S 20 -#define MDIO_PHY_ADDR_M 0x1f00000 -#define MDIO_CMD_S 18 -#define MDIO_CMD_M 0xc0000 -#define MDIO_ST_S 16 -#define MDIO_ST_M 0x30000 -#define MDIO_RW_DATA_S 0 -#define MDIO_RW_DATA_M 0xffff - -/* MDIO_CMD: MDIO commands */ -#define MDIO_CMD_ADDR 0 -#define MDIO_CMD_WRITE 1 -#define MDIO_CMD_READ 2 -#define MDIO_CMD_READ_C45 3 - -/* MDIO_ST: MDIO start field */ -#define MDIO_ST_C45 0 -#define MDIO_ST_C22 1 - -#define HWSTRAP 0x7800 -#define MHWSTRAP 0x7804 - -#endif /* _MT753X_REGS_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_swconfig.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_swconfig.c deleted file mode 100644 index 342ad576b2..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_swconfig.c +++ /dev/null @@ -1,510 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mt753x.h" -#include "mt753x_swconfig.h" -#include "mt753x_regs.h" - -#define MT753X_PORT_MIB_TXB_ID 18 /* TxByte */ -#define MT753X_PORT_MIB_RXB_ID 37 /* RxByte */ - -#define MIB_DESC(_s, _o, _n) \ - { \ - .size = (_s), \ - .offset = (_o), \ - .name = (_n), \ - } - -struct mt753x_mib_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -static const struct mt753x_mib_desc mt753x_mibs[] = { - MIB_DESC(1, STATS_TDPC, "TxDrop"), - MIB_DESC(1, STATS_TCRC, "TxCRC"), - MIB_DESC(1, STATS_TUPC, "TxUni"), - MIB_DESC(1, STATS_TMPC, "TxMulti"), - MIB_DESC(1, STATS_TBPC, "TxBroad"), - MIB_DESC(1, STATS_TCEC, "TxCollision"), - MIB_DESC(1, STATS_TSCEC, "TxSingleCol"), - MIB_DESC(1, STATS_TMCEC, "TxMultiCol"), - MIB_DESC(1, STATS_TDEC, "TxDefer"), - MIB_DESC(1, STATS_TLCEC, "TxLateCol"), - MIB_DESC(1, STATS_TXCEC, "TxExcCol"), - MIB_DESC(1, STATS_TPPC, "TxPause"), - MIB_DESC(1, STATS_TL64PC, "Tx64Byte"), - MIB_DESC(1, STATS_TL65PC, "Tx65Byte"), - MIB_DESC(1, STATS_TL128PC, "Tx128Byte"), - MIB_DESC(1, STATS_TL256PC, "Tx256Byte"), - MIB_DESC(1, STATS_TL512PC, "Tx512Byte"), - MIB_DESC(1, STATS_TL1024PC, "Tx1024Byte"), - MIB_DESC(2, STATS_TOC, "TxByte"), - MIB_DESC(1, STATS_RDPC, "RxDrop"), - MIB_DESC(1, STATS_RFPC, "RxFiltered"), - MIB_DESC(1, STATS_RUPC, "RxUni"), - MIB_DESC(1, STATS_RMPC, "RxMulti"), - MIB_DESC(1, STATS_RBPC, "RxBroad"), - MIB_DESC(1, STATS_RAEPC, "RxAlignErr"), - MIB_DESC(1, STATS_RCEPC, "RxCRC"), - MIB_DESC(1, STATS_RUSPC, "RxUnderSize"), - MIB_DESC(1, STATS_RFEPC, "RxFragment"), - MIB_DESC(1, STATS_ROSPC, "RxOverSize"), - MIB_DESC(1, STATS_RJEPC, "RxJabber"), - MIB_DESC(1, STATS_RPPC, "RxPause"), - MIB_DESC(1, STATS_RL64PC, "Rx64Byte"), - MIB_DESC(1, STATS_RL65PC, "Rx65Byte"), - MIB_DESC(1, STATS_RL128PC, "Rx128Byte"), - MIB_DESC(1, STATS_RL256PC, "Rx256Byte"), - MIB_DESC(1, STATS_RL512PC, "Rx512Byte"), - MIB_DESC(1, STATS_RL1024PC, "Rx1024Byte"), - MIB_DESC(2, STATS_ROC, "RxByte"), - MIB_DESC(1, STATS_RDPC_CTRL, "RxCtrlDrop"), - MIB_DESC(1, STATS_RDPC_ING, "RxIngDrop"), - MIB_DESC(1, STATS_RDPC_ARL, "RxARLDrop") -}; - -enum { - /* Global attributes. */ - MT753X_ATTR_ENABLE_VLAN, -}; - -static int mt753x_get_vlan_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - val->value.i = gsw->global_vlan_enable; - - return 0; -} - -static int mt753x_set_vlan_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - gsw->global_vlan_enable = val->value.i != 0; - - return 0; -} - -static int mt753x_get_port_pvid(struct switch_dev *dev, int port, int *val) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - if (port >= MT753X_NUM_PORTS) - return -EINVAL; - - *val = mt753x_reg_read(gsw, PPBV1(port)); - *val &= GRP_PORT_VID_M; - - return 0; -} - -static int mt753x_set_port_pvid(struct switch_dev *dev, int port, int pvid) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - if (port >= MT753X_NUM_PORTS) - return -EINVAL; - - if (pvid < MT753X_MIN_VID || pvid > MT753X_MAX_VID) - return -EINVAL; - - gsw->port_entries[port].pvid = pvid; - - return 0; -} - -static int mt753x_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - u32 member; - u32 etags; - int i; - - val->len = 0; - - if (val->port_vlan < 0 || val->port_vlan >= MT753X_NUM_VLANS) - return -EINVAL; - - mt753x_vlan_ctrl(gsw, VTCR_READ_VLAN_ENTRY, val->port_vlan); - - member = mt753x_reg_read(gsw, VAWD1); - member &= PORT_MEM_M; - member >>= PORT_MEM_S; - - etags = mt753x_reg_read(gsw, VAWD2); - - for (i = 0; i < MT753X_NUM_PORTS; i++) { - struct switch_port *p; - int etag; - - if (!(member & BIT(i))) - continue; - - p = &val->value.ports[val->len++]; - p->id = i; - - etag = (etags >> PORT_ETAG_S(i)) & PORT_ETAG_M; - - if (etag == ETAG_CTRL_TAG) - p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED); - else if (etag != ETAG_CTRL_UNTAG) - dev_info(gsw->dev, - "vlan egress tag control neither untag nor tag.\n"); - } - - return 0; -} - -static int mt753x_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - u8 member = 0; - u8 etags = 0; - int i; - - if (val->port_vlan < 0 || val->port_vlan >= MT753X_NUM_VLANS || - val->len > MT753X_NUM_PORTS) - return -EINVAL; - - for (i = 0; i < val->len; i++) { - struct switch_port *p = &val->value.ports[i]; - - if (p->id >= MT753X_NUM_PORTS) - return -EINVAL; - - member |= BIT(p->id); - - if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) - etags |= BIT(p->id); - } - - gsw->vlan_entries[val->port_vlan].member = member; - gsw->vlan_entries[val->port_vlan].etags = etags; - - return 0; -} - -static int mt753x_set_vid(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - int vlan; - u16 vid; - - vlan = val->port_vlan; - vid = (u16)val->value.i; - - if (vlan < 0 || vlan >= MT753X_NUM_VLANS) - return -EINVAL; - - if (vid < MT753X_MIN_VID || vid > MT753X_MAX_VID) - return -EINVAL; - - gsw->vlan_entries[vlan].vid = vid; - return 0; -} - -static int mt753x_get_vid(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - val->value.i = val->port_vlan; - return 0; -} - -static int mt753x_get_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - u32 speed, pmsr; - - if (port < 0 || port >= MT753X_NUM_PORTS) - return -EINVAL; - - pmsr = mt753x_reg_read(gsw, PMSR(port)); - - link->link = pmsr & MAC_LNK_STS; - link->duplex = pmsr & MAC_DPX_STS; - speed = (pmsr & MAC_SPD_STS_M) >> MAC_SPD_STS_S; - - switch (speed) { - case MAC_SPD_10: - link->speed = SWITCH_PORT_SPEED_10; - break; - case MAC_SPD_100: - link->speed = SWITCH_PORT_SPEED_100; - break; - case MAC_SPD_1000: - link->speed = SWITCH_PORT_SPEED_1000; - break; - case MAC_SPD_2500: - /* TODO: swconfig has no support for 2500 now */ - link->speed = SWITCH_PORT_SPEED_UNKNOWN; - break; - } - - return 0; -} - -static int mt753x_set_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ -#ifndef MODULE - if (port >= MT753X_NUM_PHYS) - return -EINVAL; - - return switch_generic_set_link(dev, port, link); -#else - return -ENOTSUPP; -#endif -} - -static u64 get_mib_counter(struct gsw_mt753x *gsw, int i, int port) -{ - unsigned int offset; - u64 lo, hi, hi2; - - offset = mt753x_mibs[i].offset; - - if (mt753x_mibs[i].size == 1) - return mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset)); - - do { - hi = mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset + 4)); - lo = mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset)); - hi2 = mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset + 4)); - } while (hi2 != hi); - - return (hi << 32) | lo; -} - -static int mt753x_get_port_mib(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - static char buf[4096]; - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - int i, len = 0; - - if (val->port_vlan >= MT753X_NUM_PORTS) - return -EINVAL; - - len += snprintf(buf + len, sizeof(buf) - len, - "Port %d MIB counters\n", val->port_vlan); - - for (i = 0; i < ARRAY_SIZE(mt753x_mibs); ++i) { - u64 counter; - - len += snprintf(buf + len, sizeof(buf) - len, - "%-11s: ", mt753x_mibs[i].name); - counter = get_mib_counter(gsw, i, val->port_vlan); - len += snprintf(buf + len, sizeof(buf) - len, "%llu\n", - counter); - } - - val->value.s = buf; - val->len = len; - return 0; -} - -static int mt753x_get_port_stats(struct switch_dev *dev, int port, - struct switch_port_stats *stats) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - if (port < 0 || port >= MT753X_NUM_PORTS) - return -EINVAL; - - stats->tx_bytes = get_mib_counter(gsw, MT753X_PORT_MIB_TXB_ID, port); - stats->rx_bytes = get_mib_counter(gsw, MT753X_PORT_MIB_RXB_ID, port); - - return 0; -} - -static void mt753x_port_isolation(struct gsw_mt753x *gsw) -{ - int i; - - for (i = 0; i < MT753X_NUM_PORTS; i++) - mt753x_reg_write(gsw, PCR(i), - BIT(gsw->cpu_port) << PORT_MATRIX_S); - - mt753x_reg_write(gsw, PCR(gsw->cpu_port), PORT_MATRIX_M); - - for (i = 0; i < MT753X_NUM_PORTS; i++) - mt753x_reg_write(gsw, PVC(i), - (0x8100 << STAG_VPID_S) | - (VA_TRANSPARENT_PORT << VLAN_ATTR_S)); -} - -static int mt753x_apply_config(struct switch_dev *dev) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - if (!gsw->global_vlan_enable) { - mt753x_port_isolation(gsw); - return 0; - } - - mt753x_apply_vlan_config(gsw); - - return 0; -} - -static int mt753x_reset_switch(struct switch_dev *dev) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - int i; - - memset(gsw->port_entries, 0, sizeof(gsw->port_entries)); - memset(gsw->vlan_entries, 0, sizeof(gsw->vlan_entries)); - - /* set default vid of each vlan to the same number of vlan, so the vid - * won't need be set explicitly. - */ - for (i = 0; i < MT753X_NUM_VLANS; i++) - gsw->vlan_entries[i].vid = i; - - return 0; -} - -static int mt753x_phy_read16(struct switch_dev *dev, int addr, u8 reg, - u16 *value) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - *value = gsw->mii_read(gsw, addr, reg); - - return 0; -} - -static int mt753x_phy_write16(struct switch_dev *dev, int addr, u8 reg, - u16 value) -{ - struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev); - - gsw->mii_write(gsw, addr, reg, value); - - return 0; -} - -static const struct switch_attr mt753x_global[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_vlan", - .description = "VLAN mode (1:enabled)", - .max = 1, - .id = MT753X_ATTR_ENABLE_VLAN, - .get = mt753x_get_vlan_enable, - .set = mt753x_set_vlan_enable, - } -}; - -static const struct switch_attr mt753x_port[] = { - { - .type = SWITCH_TYPE_STRING, - .name = "mib", - .description = "Get MIB counters for port", - .get = mt753x_get_port_mib, - .set = NULL, - }, -}; - -static const struct switch_attr mt753x_vlan[] = { - { - .type = SWITCH_TYPE_INT, - .name = "vid", - .description = "VLAN ID (0-4094)", - .set = mt753x_set_vid, - .get = mt753x_get_vid, - .max = 4094, - }, -}; - -static const struct switch_dev_ops mt753x_swdev_ops = { - .attr_global = { - .attr = mt753x_global, - .n_attr = ARRAY_SIZE(mt753x_global), - }, - .attr_port = { - .attr = mt753x_port, - .n_attr = ARRAY_SIZE(mt753x_port), - }, - .attr_vlan = { - .attr = mt753x_vlan, - .n_attr = ARRAY_SIZE(mt753x_vlan), - }, - .get_vlan_ports = mt753x_get_vlan_ports, - .set_vlan_ports = mt753x_set_vlan_ports, - .get_port_pvid = mt753x_get_port_pvid, - .set_port_pvid = mt753x_set_port_pvid, - .get_port_link = mt753x_get_port_link, - .set_port_link = mt753x_set_port_link, - .get_port_stats = mt753x_get_port_stats, - .apply_config = mt753x_apply_config, - .reset_switch = mt753x_reset_switch, - .phy_read16 = mt753x_phy_read16, - .phy_write16 = mt753x_phy_write16, -}; - -int mt753x_swconfig_init(struct gsw_mt753x *gsw) -{ - struct device_node *np = gsw->dev->of_node; - struct switch_dev *swdev; - int ret; - - if (of_property_read_u32(np, "mediatek,cpuport", &gsw->cpu_port)) - gsw->cpu_port = MT753X_DFL_CPU_PORT; - - swdev = &gsw->swdev; - - swdev->name = gsw->name; - swdev->alias = gsw->name; - swdev->cpu_port = gsw->cpu_port; - swdev->ports = MT753X_NUM_PORTS; - swdev->vlans = MT753X_NUM_VLANS; - swdev->ops = &mt753x_swdev_ops; - - ret = register_switch(swdev, NULL); - if (ret) { - dev_notice(gsw->dev, "Failed to register switch %s\n", - swdev->name); - return ret; - } - - mt753x_apply_config(swdev); - - return 0; -} - -void mt753x_swconfig_destroy(struct gsw_mt753x *gsw) -{ - unregister_switch(&gsw->swdev); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_swconfig.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_swconfig.h deleted file mode 100644 index f000364ee8..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_swconfig.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - * Author: Weijie Gao - */ - -#ifndef _MT753X_SWCONFIG_H_ -#define _MT753X_SWCONFIG_H_ - -#ifdef CONFIG_SWCONFIG -#include -#include "mt753x.h" - -int mt753x_swconfig_init(struct gsw_mt753x *gsw); -void mt753x_swconfig_destroy(struct gsw_mt753x *gsw); -#else -static inline int mt753x_swconfig_init(struct gsw_mt753x *gsw) -{ - mt753x_apply_vlan_config(gsw); - - return 0; -} - -static inline void mt753x_swconfig_destroy(struct gsw_mt753x *gsw) -{ -} -#endif - -#endif /* _MT753X_SWCONFIG_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_vlan.c b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_vlan.c deleted file mode 100644 index 4d88eee8de..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_vlan.c +++ /dev/null @@ -1,183 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2018 MediaTek Inc. - */ - -#include "mt753x.h" -#include "mt753x_regs.h" - -struct mt753x_mapping mt753x_def_mapping[] = { - { - .name = "llllw", - .pvids = { 1, 1, 1, 1, 2, 2, 1 }, - .members = { 0, 0x4f, 0x30 }, - .etags = { 0, 0, 0 }, - .vids = { 0, 1, 2 }, - }, { - .name = "wllll", - .pvids = { 2, 1, 1, 1, 1, 2, 1 }, - .members = { 0, 0x5e, 0x21 }, - .etags = { 0, 0, 0 }, - .vids = { 0, 1, 2 }, - }, { - .name = "lwlll", - .pvids = { 1, 2, 1, 1, 1, 2, 1 }, - .members = { 0, 0x5d, 0x22 }, - .etags = { 0, 0, 0 }, - .vids = { 0, 1, 2 }, - }, -}; - -void mt753x_vlan_ctrl(struct gsw_mt753x *gsw, u32 cmd, u32 val) -{ - int i; - - mt753x_reg_write(gsw, VTCR, - VTCR_BUSY | ((cmd << VTCR_FUNC_S) & VTCR_FUNC_M) | - (val & VTCR_VID_M)); - - for (i = 0; i < 300; i++) { - u32 val = mt753x_reg_read(gsw, VTCR); - - if ((val & VTCR_BUSY) == 0) - break; - - usleep_range(1000, 1100); - } - - if (i == 300) - dev_info(gsw->dev, "vtcr timeout\n"); -} - -static void mt753x_write_vlan_entry(struct gsw_mt753x *gsw, int vlan, u16 vid, - u8 ports, u8 etags) -{ - int port; - u32 val; - - /* vlan port membership */ - if (ports) - mt753x_reg_write(gsw, VAWD1, - IVL_MAC | VTAG_EN | VENTRY_VALID | - ((ports << PORT_MEM_S) & PORT_MEM_M)); - else - mt753x_reg_write(gsw, VAWD1, 0); - - /* egress mode */ - val = 0; - for (port = 0; port < MT753X_NUM_PORTS; port++) { - if (etags & BIT(port)) - val |= ETAG_CTRL_TAG << PORT_ETAG_S(port); - else - val |= ETAG_CTRL_UNTAG << PORT_ETAG_S(port); - } - mt753x_reg_write(gsw, VAWD2, val); - - /* write to vlan table */ - mt753x_vlan_ctrl(gsw, VTCR_WRITE_VLAN_ENTRY, vid); -} - -void mt753x_apply_vlan_config(struct gsw_mt753x *gsw) -{ - int i, j; - u8 tag_ports; - u8 untag_ports; - - /* set all ports as security mode */ - for (i = 0; i < MT753X_NUM_PORTS; i++) - mt753x_reg_write(gsw, PCR(i), - PORT_MATRIX_M | SECURITY_MODE); - - /* check if a port is used in tag/untag vlan egress mode */ - tag_ports = 0; - untag_ports = 0; - - for (i = 0; i < MT753X_NUM_VLANS; i++) { - u8 member = gsw->vlan_entries[i].member; - u8 etags = gsw->vlan_entries[i].etags; - - if (!member) - continue; - - for (j = 0; j < MT753X_NUM_PORTS; j++) { - if (!(member & BIT(j))) - continue; - - if (etags & BIT(j)) - tag_ports |= 1u << j; - else - untag_ports |= 1u << j; - } - } - - /* set all untag-only ports as transparent and the rest as user port */ - for (i = 0; i < MT753X_NUM_PORTS; i++) { - u32 pvc_mode = 0x8100 << STAG_VPID_S; - - if (untag_ports & BIT(i) && !(tag_ports & BIT(i))) - pvc_mode = (0x8100 << STAG_VPID_S) | - (VA_TRANSPARENT_PORT << VLAN_ATTR_S); - - mt753x_reg_write(gsw, PVC(i), pvc_mode); - } - - /* first clear the switch vlan table */ - for (i = 0; i < MT753X_NUM_VLANS; i++) - mt753x_write_vlan_entry(gsw, i, i, 0, 0); - - /* now program only vlans with members to avoid - * clobbering remapped entries in later iterations - */ - for (i = 0; i < MT753X_NUM_VLANS; i++) { - u16 vid = gsw->vlan_entries[i].vid; - u8 member = gsw->vlan_entries[i].member; - u8 etags = gsw->vlan_entries[i].etags; - - if (member) - mt753x_write_vlan_entry(gsw, i, vid, member, etags); - } - - /* Port Default PVID */ - for (i = 0; i < MT753X_NUM_PORTS; i++) { - int vlan = gsw->port_entries[i].pvid; - u16 pvid = 0; - u32 val; - - if (vlan < MT753X_NUM_VLANS && gsw->vlan_entries[vlan].member) - pvid = gsw->vlan_entries[vlan].vid; - - val = mt753x_reg_read(gsw, PPBV1(i)); - val &= ~GRP_PORT_VID_M; - val |= pvid; - mt753x_reg_write(gsw, PPBV1(i), val); - } -} - -struct mt753x_mapping *mt753x_find_mapping(struct device_node *np) -{ - const char *map; - int i; - - if (of_property_read_string(np, "mediatek,portmap", &map)) - return NULL; - - for (i = 0; i < ARRAY_SIZE(mt753x_def_mapping); i++) - if (!strcmp(map, mt753x_def_mapping[i].name)) - return &mt753x_def_mapping[i]; - - return NULL; -} - -void mt753x_apply_mapping(struct gsw_mt753x *gsw, struct mt753x_mapping *map) -{ - int i = 0; - - for (i = 0; i < MT753X_NUM_PORTS; i++) - gsw->port_entries[i].pvid = map->pvids[i]; - - for (i = 0; i < MT753X_NUM_VLANS; i++) { - gsw->vlan_entries[i].member = map->members[i]; - gsw->vlan_entries[i].etags = map->etags[i]; - gsw->vlan_entries[i].vid = map->vids[i]; - } -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_vlan.h b/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_vlan.h deleted file mode 100644 index c726b8eacd..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/mtk/mt753x/mt753x_vlan.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2018 MediaTek Inc. - */ - -#ifndef _MT753X_VLAN_H_ -#define _MT753X_VLAN_H_ - -#define MT753X_NUM_PORTS 7 -#define MT753X_NUM_VLANS 4095 -#define MT753X_MAX_VID 4095 -#define MT753X_MIN_VID 0 - -struct gsw_mt753x; - -struct mt753x_port_entry { - u16 pvid; -}; - -struct mt753x_vlan_entry { - u16 vid; - u8 member; - u8 etags; -}; - -struct mt753x_mapping { - char *name; - u16 pvids[MT753X_NUM_PORTS]; - u8 members[MT753X_NUM_VLANS]; - u8 etags[MT753X_NUM_VLANS]; - u16 vids[MT753X_NUM_VLANS]; -}; - -extern struct mt753x_mapping mt753x_defaults[]; - -void mt753x_vlan_ctrl(struct gsw_mt753x *gsw, u32 cmd, u32 val); -void mt753x_apply_vlan_config(struct gsw_mt753x *gsw); -struct mt753x_mapping *mt753x_find_mapping(struct device_node *np); -void mt753x_apply_mapping(struct gsw_mt753x *gsw, struct mt753x_mapping *map); -#endif /* _MT753X_VLAN_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/Makefile b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/Makefile deleted file mode 100644 index 0f2891ead4..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/Makefile +++ /dev/null @@ -1,66 +0,0 @@ -obj-$(CONFIG_RTL8367S_GSW) += rtl8367s_gsw.o -rtl8367s_gsw-objs := rtl8367s_mdio.o rtl8367s_dbg.o -ifeq ($(CONFIG_SWCONFIG),y) -rtl8367s_gsw-objs += rtl8367s.o -endif -rtl8367s_gsw-objs += rtl8367c/acl.o -rtl8367s_gsw-objs += rtl8367c/cpu.o -rtl8367s_gsw-objs += rtl8367c/dot1x.o -rtl8367s_gsw-objs += rtl8367c/eee.o -rtl8367s_gsw-objs += rtl8367c/igmp.o -rtl8367s_gsw-objs += rtl8367c/interrupt.o -rtl8367s_gsw-objs += rtl8367c/l2.o -rtl8367s_gsw-objs += rtl8367c/leaky.o -rtl8367s_gsw-objs += rtl8367c/led.o -rtl8367s_gsw-objs += rtl8367c/mirror.o -rtl8367s_gsw-objs += rtl8367c/oam.o -rtl8367s_gsw-objs += rtl8367c/port.o -rtl8367s_gsw-objs += rtl8367c/ptp.o -rtl8367s_gsw-objs += rtl8367c/qos.o -rtl8367s_gsw-objs += rtl8367c/rate.o -rtl8367s_gsw-objs += rtl8367c/rldp.o -rtl8367s_gsw-objs += rtl8367c/rtk_switch.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_acl.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_cputag.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_dot1x.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_eav.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_eee.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_fc.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_green.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_hsb.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_igmp.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_inbwctrl.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_interrupt.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_led.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_lut.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_meter.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_mib.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_mirror.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_misc.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_oam.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_phy.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_port.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_portIsolation.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_qos.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_rldp.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_rma.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_scheduling.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_storm.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_svlan.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_trunking.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_unknownMulticast.o -rtl8367s_gsw-objs += rtl8367c/rtl8367c_asicdrv_vlan.o -rtl8367s_gsw-objs += rtl8367c/smi.o -rtl8367s_gsw-objs += rtl8367c/stat.o -rtl8367s_gsw-objs += rtl8367c/storm.o -rtl8367s_gsw-objs += rtl8367c/svlan.o -rtl8367s_gsw-objs += rtl8367c/trap.o -rtl8367s_gsw-objs += rtl8367c/trunk.o -rtl8367s_gsw-objs += rtl8367c/vlan.o - -ccflags-y += -Werror -D_LITTLE_ENDIAN -DMDC_MDIO_OPERATION - -ccflags-y += -Idrivers/net/phy/rtk/rtl8367c/include -ccflags-y += -Iinclude/linux/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/modules.builtin b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/modules.builtin deleted file mode 100644 index 961a70a150..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/modules.builtin +++ /dev/null @@ -1 +0,0 @@ -kernel/drivers/net/phy/rtk/rtl8367s_gsw.ko diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/acl.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/acl.c deleted file mode 100644 index 75e5a5e740..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/acl.c +++ /dev/null @@ -1,2061 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in ACL module. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -CONST_T rtk_uint8 filter_templateField[RTL8367C_ACLTEMPLATENO][RTL8367C_ACLRULEFIELDNO] = { - {ACL_DMAC0, ACL_DMAC1, ACL_DMAC2, ACL_SMAC0, ACL_SMAC1, ACL_SMAC2, ACL_ETHERTYPE, ACL_FIELD_SELECT15}, - {ACL_IP4SIP0, ACL_IP4SIP1, ACL_IP4DIP0, ACL_IP4DIP1, ACL_FIELD_SELECT13, ACL_FIELD_SELECT14, ACL_FIELD_SELECT02, ACL_FIELD_SELECT15}, - {ACL_IP6SIP0WITHIPV4, ACL_IP6SIP1WITHIPV4,ACL_FIELD_SELECT03, ACL_FIELD_SELECT04, ACL_FIELD_SELECT05, ACL_FIELD_SELECT06, ACL_FIELD_SELECT07, ACL_FIELD_SELECT08}, - {ACL_IP6DIP0WITHIPV4, ACL_IP6DIP1WITHIPV4,ACL_FIELD_SELECT09, ACL_FIELD_SELECT10, ACL_FIELD_SELECT11, ACL_FIELD_SELECT12, ACL_FIELD_SELECT13, ACL_FIELD_SELECT14}, - {ACL_VIDRANGE, ACL_IPRANGE, ACL_PORTRANGE, ACL_CTAG, ACL_STAG, ACL_FIELD_SELECT13, ACL_FIELD_SELECT14, ACL_FIELD_SELECT15} -}; - -CONST_T rtk_uint8 filter_advanceCaretagField[RTL8367C_ACLTEMPLATENO][2] = { - {TRUE, 7}, - {TRUE, 7}, - {FALSE, 0}, - {FALSE, 0}, - {TRUE, 7}, -}; - - -CONST_T rtk_uint8 filter_fieldTemplateIndex[FILTER_FIELD_END][RTK_FILTER_FIELD_USED_MAX] = { - {0x00, 0x01,0x02}, - {0x03, 0x04,0x05}, - {0x06}, - {0x43}, - {0x44}, - {0x10, 0x11}, - {0x12, 0x13}, - {0x24}, - {0x25}, - {0x35}, - {0x35}, - {0x20, 0x21,0x22,0x23}, - {0x30, 0x31,0x32,0x33}, - {0x26}, - {0x27}, - {0x14}, - {0x15}, - {0x16}, - {0x14}, - {0x15}, - {0x14}, - {0x14}, - {0x14}, - - {0x40}, - {0x41}, - {0x42}, - - {0x14}, - {0x15}, - {0x16}, - {0x22}, - {0x23}, - {0x24}, - {0x25}, - {0x26}, - {0x27}, - {0x32}, - {0x33}, - {0x34}, - {0x35}, - {0x36}, - {0x37}, - {0x47}, - - {0xFF} /* Pattern Match */ -}; - -CONST_T rtk_uint8 filter_fieldSize[FILTER_FIELD_END] = { - 3, 3, 1, 1, 1, - 2, 2, 1, 1, 1, 1, 4, 4, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 8 -}; - -CONST_T rtk_uint16 field_selector[RTL8367C_FIELDSEL_FORMAT_NUMBER][2] = -{ - {FIELDSEL_FORMAT_DEFAULT, 0}, /* Field Selector 0 */ - {FIELDSEL_FORMAT_DEFAULT, 0}, /* Field Selector 1 */ - {FIELDSEL_FORMAT_IPPAYLOAD, 12}, /* Field Selector 2 */ - {FIELDSEL_FORMAT_IPV6, 10}, /* Field Selector 3 */ - {FIELDSEL_FORMAT_IPV6, 8}, /* Field Selector 4 */ - {FIELDSEL_FORMAT_IPV4, 0}, /* Field Selector 5 */ - {FIELDSEL_FORMAT_IPV4, 8}, /* Field Selector 6 */ - {FIELDSEL_FORMAT_IPV6, 0}, /* Field Selector 7 */ - {FIELDSEL_FORMAT_IPV6, 6}, /* Field Selector 8 */ - {FIELDSEL_FORMAT_IPV6, 26}, /* Field Selector 9 */ - {FIELDSEL_FORMAT_IPV6, 24}, /* Field Selector 10 */ - {FIELDSEL_FORMAT_DEFAULT, 0}, /* Field Selector 11 */ - {FIELDSEL_FORMAT_IPV4, 6}, /* Field Selector 12 */ - {FIELDSEL_FORMAT_IPPAYLOAD, 0}, /* Field Selector 13 */ - {FIELDSEL_FORMAT_IPPAYLOAD, 2}, /* Field Selector 14 */ - {FIELDSEL_FORMAT_DEFAULT, 0} /* Field Selector 15 */ -}; - - -static rtk_api_ret_t _rtk_filter_igrAcl_writeDataField(rtl8367c_aclrule *aclRule, rtk_filter_field_t *fieldPtr); - - -/* Function Name: - * rtk_filter_igrAcl_init - * Description: - * ACL initialization function - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_field or pFilter_cfg point to NULL. - * Note: - * This function enable and intialize ACL function - */ -rtk_api_ret_t rtk_filter_igrAcl_init(void) -{ - rtl8367c_acltemplate_t aclTemp; - rtk_uint32 i, j; - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((ret = rtk_filter_igrAcl_cfg_delAll()) != RT_ERR_OK) - return ret; - - for(i = 0; i < RTL8367C_ACLTEMPLATENO; i++) - { - for(j = 0; j < RTL8367C_ACLRULEFIELDNO;j++) - aclTemp.field[j] = filter_templateField[i][j]; - - if ((ret = rtl8367c_setAsicAclTemplate(i, &aclTemp)) != RT_ERR_OK) - return ret; - } - - for(i = 0; i < RTL8367C_FIELDSEL_FORMAT_NUMBER; i++) - { - if ((ret = rtl8367c_setAsicFieldSelector(i, field_selector[i][0], field_selector[i][1])) != RT_ERR_OK) - return ret; - } - - RTK_SCAN_ALL_PHY_PORTMASK(i) - { - if ((ret = rtl8367c_setAsicAcl(i, TRUE)) != RT_ERR_OK) - return ret; - - if ((ret = rtl8367c_setAsicAclUnmatchedPermit(i, TRUE)) != RT_ERR_OK) - return ret; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_field_add - * Description: - * Add comparison rule to an ACL configuration - * Input: - * pFilter_cfg - The ACL configuration that this function will add comparison rule - * pFilter_field - The comparison rule that will be added. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_field or pFilter_cfg point to NULL. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function add a comparison rule (*pFilter_field) to an ACL configuration (*pFilter_cfg). - * Pointer pFilter_cfg points to an ACL configuration structure, this structure keeps multiple ACL - * comparison rules by means of linked list. Pointer pFilter_field will be added to linked - * list keeped by structure that pFilter_cfg points to. - */ -rtk_api_ret_t rtk_filter_igrAcl_field_add(rtk_filter_cfg_t* pFilter_cfg, rtk_filter_field_t* pFilter_field) -{ - rtk_uint32 i; - rtk_filter_field_t *tailPtr; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pFilter_cfg || NULL == pFilter_field) - return RT_ERR_NULL_POINTER; - - if(pFilter_field->fieldType >= FILTER_FIELD_END) - return RT_ERR_ENTRY_INDEX; - - - if(0 == pFilter_field->fieldTemplateNo) - { - pFilter_field->fieldTemplateNo = filter_fieldSize[pFilter_field->fieldType]; - - for(i = 0; i < pFilter_field->fieldTemplateNo; i++) - { - pFilter_field->fieldTemplateIdx[i] = filter_fieldTemplateIndex[pFilter_field->fieldType][i]; - } - } - - if(NULL == pFilter_cfg->fieldHead) - { - pFilter_cfg->fieldHead = pFilter_field; - } - else - { - if (pFilter_cfg->fieldHead->next == NULL) - { - pFilter_cfg->fieldHead->next = pFilter_field; - } - else - { - tailPtr = pFilter_cfg->fieldHead->next; - while( tailPtr->next != NULL) - { - tailPtr = tailPtr->next; - } - tailPtr->next = pFilter_field; - } - } - - return RT_ERR_OK; -} - -static rtk_api_ret_t _rtk_filter_igrAcl_writeDataField(rtl8367c_aclrule *aclRule, rtk_filter_field_t *fieldPtr) -{ - rtk_uint32 i, tempIdx,fieldIdx, ipValue, ipMask; - rtk_uint32 ip6addr[RTK_IPV6_ADDR_WORD_LENGTH]; - rtk_uint32 ip6mask[RTK_IPV6_ADDR_WORD_LENGTH]; - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - - aclRule[tempIdx].valid = TRUE; - } - - switch (fieldPtr->fieldType) - { - /* use DMAC structure as representative for mac structure */ - case FILTER_FIELD_DMAC: - case FILTER_FIELD_SMAC: - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.mac.value.octet[5 - i*2] | (fieldPtr->filter_pattern_union.mac.value.octet[5 - (i*2 + 1)] << 8); - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.mac.mask.octet[5 - i*2] | (fieldPtr->filter_pattern_union.mac.mask.octet[5 - (i*2 + 1)] << 8); - } - break; - case FILTER_FIELD_ETHERTYPE: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.etherType.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.etherType.mask; - } - break; - case FILTER_FIELD_IPV4_SIP: - case FILTER_FIELD_IPV4_DIP: - - ipValue = fieldPtr->filter_pattern_union.sip.value; - ipMask = fieldPtr->filter_pattern_union.sip.mask; - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = (0xFFFF & (ipValue >> (i*16))); - aclRule[tempIdx].care_bits.field[fieldIdx] = (0xFFFF & (ipMask >> (i*16))); - } - break; - case FILTER_FIELD_IPV4_TOS: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.ipTos.value & 0xFF; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.ipTos.mask & 0xFF; - } - break; - case FILTER_FIELD_IPV4_PROTOCOL: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.protocol.value & 0xFF; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.protocol.mask & 0xFF; - } - break; - case FILTER_FIELD_IPV6_SIPV6: - case FILTER_FIELD_IPV6_DIPV6: - for(i = 0; i < RTK_IPV6_ADDR_WORD_LENGTH; i++) - { - ip6addr[i] = fieldPtr->filter_pattern_union.sipv6.value.addr[i]; - ip6mask[i] = fieldPtr->filter_pattern_union.sipv6.mask.addr[i]; - } - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - if(i < 2) - { - aclRule[tempIdx].data_bits.field[fieldIdx] = ((ip6addr[0] & (0xFFFF << (i * 16))) >> (i * 16)); - aclRule[tempIdx].care_bits.field[fieldIdx] = ((ip6mask[0] & (0xFFFF << (i * 16))) >> (i * 16)); - } - else - { - /*default acl template for ipv6 address supports MSB 32-bits and LSB 32-bits only*/ - aclRule[tempIdx].data_bits.field[fieldIdx] = ((ip6addr[3] & (0xFFFF << ((i&1) * 16))) >> ((i&1) * 16)); - aclRule[tempIdx].care_bits.field[fieldIdx] = ((ip6mask[3] & (0xFFFF << ((i&1) * 16))) >> ((i&1) * 16)); - } - } - - break; - case FILTER_FIELD_CTAG: - case FILTER_FIELD_STAG: - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = (fieldPtr->filter_pattern_union.l2tag.pri.value << 13) | (fieldPtr->filter_pattern_union.l2tag.cfi.value << 12) | fieldPtr->filter_pattern_union.l2tag.vid.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = (fieldPtr->filter_pattern_union.l2tag.pri.mask << 13) | (fieldPtr->filter_pattern_union.l2tag.cfi.mask << 12) | fieldPtr->filter_pattern_union.l2tag.vid.mask; - } - break; - case FILTER_FIELD_IPV4_FLAG: - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] &= 0x1FFF; - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.ipFlag.xf.value << 15); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.ipFlag.df.value << 14); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.ipFlag.mf.value << 13); - - aclRule[tempIdx].care_bits.field[fieldIdx] &= 0x1FFF; - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.ipFlag.xf.mask << 15); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.ipFlag.df.mask << 14); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.ipFlag.mf.mask << 13); - } - - break; - case FILTER_FIELD_IPV4_OFFSET: - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] &= 0xE000; - aclRule[tempIdx].data_bits.field[fieldIdx] |= fieldPtr->filter_pattern_union.inData.value; - - aclRule[tempIdx].care_bits.field[fieldIdx] &= 0xE000; - aclRule[tempIdx].care_bits.field[fieldIdx] |= fieldPtr->filter_pattern_union.inData.mask; - } - - break; - - case FILTER_FIELD_IPV6_TRAFFIC_CLASS: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - - aclRule[tempIdx].data_bits.field[fieldIdx] = (fieldPtr->filter_pattern_union.inData.value << 4)&0x0FF0; - aclRule[tempIdx].care_bits.field[fieldIdx] = (fieldPtr->filter_pattern_union.inData.mask << 4)&0x0FF0; - } - break; - case FILTER_FIELD_IPV6_NEXT_HEADER: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.inData.value << 8; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.inData.mask << 8; - } - break; - case FILTER_FIELD_TCP_SPORT: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.tcpSrcPort.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.tcpSrcPort.mask; - } - break; - case FILTER_FIELD_TCP_DPORT: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.tcpDstPort.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.tcpDstPort.mask; - } - break; - case FILTER_FIELD_TCP_FLAG: - - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.cwr.value << 7); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.ece.value << 6); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.urg.value << 5); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.ack.value << 4); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.psh.value << 3); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.rst.value << 2); - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.syn.value << 1); - aclRule[tempIdx].data_bits.field[fieldIdx] |= fieldPtr->filter_pattern_union.tcpFlag.fin.value; - - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.cwr.mask << 7); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.ece.mask << 6); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.urg.mask << 5); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.ack.mask << 4); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.psh.mask << 3); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.rst.mask << 2); - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.tcpFlag.syn.mask << 1); - aclRule[tempIdx].care_bits.field[fieldIdx] |= fieldPtr->filter_pattern_union.tcpFlag.fin.mask; - } - break; - case FILTER_FIELD_UDP_SPORT: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.udpSrcPort.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.udpSrcPort.mask; - } - break; - case FILTER_FIELD_UDP_DPORT: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.udpDstPort.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.udpDstPort.mask; - } - break; - case FILTER_FIELD_ICMP_CODE: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] &= 0xFF00; - aclRule[tempIdx].data_bits.field[fieldIdx] |= fieldPtr->filter_pattern_union.icmpCode.value; - aclRule[tempIdx].care_bits.field[fieldIdx] &= 0xFF00; - aclRule[tempIdx].care_bits.field[fieldIdx] |= fieldPtr->filter_pattern_union.icmpCode.mask; - } - break; - case FILTER_FIELD_ICMP_TYPE: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] &= 0x00FF; - aclRule[tempIdx].data_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.icmpType.value << 8); - aclRule[tempIdx].care_bits.field[fieldIdx] &= 0x00FF; - aclRule[tempIdx].care_bits.field[fieldIdx] |= (fieldPtr->filter_pattern_union.icmpType.mask << 8); - } - break; - case FILTER_FIELD_IGMP_TYPE: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = (fieldPtr->filter_pattern_union.igmpType.value << 8); - aclRule[tempIdx].care_bits.field[fieldIdx] = (fieldPtr->filter_pattern_union.igmpType.mask << 8); - } - break; - case FILTER_FIELD_PATTERN_MATCH: - for(i = 0; i < fieldPtr->fieldTemplateNo; i++) - { - tempIdx = (fieldPtr->fieldTemplateIdx[i] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[i] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = ((fieldPtr->filter_pattern_union.pattern.value[i/2] >> (16 * (i%2))) & 0x0000FFFF ); - aclRule[tempIdx].care_bits.field[fieldIdx] = ((fieldPtr->filter_pattern_union.pattern.mask[i/2] >> (16 * (i%2))) & 0x0000FFFF ); - } - break; - case FILTER_FIELD_VID_RANGE: - case FILTER_FIELD_IP_RANGE: - case FILTER_FIELD_PORT_RANGE: - default: - tempIdx = (fieldPtr->fieldTemplateIdx[0] & 0xF0) >> 4; - fieldIdx = fieldPtr->fieldTemplateIdx[0] & 0x0F; - - aclRule[tempIdx].data_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.inData.value; - aclRule[tempIdx].care_bits.field[fieldIdx] = fieldPtr->filter_pattern_union.inData.mask; - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_cfg_add - * Description: - * Add an ACL configuration to ASIC - * Input: - * filter_id - Start index of ACL configuration. - * pFilter_cfg - The ACL configuration that this function will add comparison rule - * pFilter_action - Action(s) of ACL configuration. - * Output: - * ruleNum - number of rules written in acl table - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_field or pFilter_cfg point to NULL. - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENTRY_INDEX - Invalid filter_id . - * RT_ERR_NULL_POINTER - Pointer pFilter_action or pFilter_cfg point to NULL. - * RT_ERR_FILTER_INACL_ACT_NOT_SUPPORT - Action is not supported in this chip. - * RT_ERR_FILTER_INACL_RULE_NOT_SUPPORT - Rule is not supported. - * Note: - * This function store pFilter_cfg, pFilter_action into ASIC. The starting - * index(es) is filter_id. - */ -rtk_api_ret_t rtk_filter_igrAcl_cfg_add(rtk_filter_id_t filter_id, rtk_filter_cfg_t* pFilter_cfg, rtk_filter_action_t* pFilter_action, rtk_filter_number_t *ruleNum) -{ - rtk_api_ret_t retVal; - rtk_uint32 careTagData, careTagMask; - rtk_uint32 i,vidx, svidx, actType, ruleId; - rtk_uint32 aclActCtrl; - rtk_uint32 cpuPort; - rtk_filter_field_t* fieldPtr; - rtl8367c_aclrule aclRule[RTL8367C_ACLTEMPLATENO]; - rtl8367c_aclrule tempRule; - rtl8367c_acl_act_t aclAct; - rtk_uint32 noRulesAdd; - rtk_uint32 portmask; - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(filter_id > RTL8367C_ACLRULEMAX ) - return RT_ERR_ENTRY_INDEX; - - if((NULL == pFilter_cfg) || (NULL == pFilter_action) || (NULL == ruleNum)) - return RT_ERR_NULL_POINTER; - - fieldPtr = pFilter_cfg->fieldHead; - - /* init RULE */ - for(i = 0; i < RTL8367C_ACLTEMPLATENO; i++) - { - memset(&aclRule[i], 0, sizeof(rtl8367c_aclrule)); - - aclRule[i].data_bits.type= i; - aclRule[i].care_bits.type= 0x7; - } - - while(NULL != fieldPtr) - { - _rtk_filter_igrAcl_writeDataField(aclRule, fieldPtr); - - fieldPtr = fieldPtr->next; - } - - /*set care tag mask in User Defined Field 15*/ - /*Follow care tag should not be used while ACL template and User defined fields are fully control by system designer*/ - /*those advanced packet type care tag is used in default template design structure only*/ - careTagData = 0; - careTagMask = 0; - - for(i = CARE_TAG_TCP; i < CARE_TAG_END; i++) - { - if(pFilter_cfg->careTag.tagType[i].mask) - careTagMask = careTagMask | (1 << (i-CARE_TAG_TCP)); - - if(pFilter_cfg->careTag.tagType[i].value) - careTagData = careTagData | (1 << (i-CARE_TAG_TCP)); - } - - if(careTagData || careTagMask) - { - i = 0; - while(i < RTL8367C_ACLTEMPLATENO) - { - if(aclRule[i].valid == 1 && filter_advanceCaretagField[i][0] == TRUE) - { - - aclRule[i].data_bits.field[filter_advanceCaretagField[i][1]] = careTagData & 0xFFFF; - aclRule[i].care_bits.field[filter_advanceCaretagField[i][1]] = careTagMask & 0xFFFF; - break; - } - i++; - } - /*none of previous used template containing field 15*/ - if(i == RTL8367C_ACLTEMPLATENO) - { - i = 0; - while(i < RTL8367C_ACLTEMPLATENO) - { - if(filter_advanceCaretagField[i][0] == TRUE) - { - aclRule[i].data_bits.field[filter_advanceCaretagField[i][1]] = careTagData & 0xFFFF; - aclRule[i].care_bits.field[filter_advanceCaretagField[i][1]] = careTagMask & 0xFFFF; - aclRule[i].valid = 1; - break; - } - i++; - } - } - } - - /*Check rule number*/ - noRulesAdd = 0; - for(i = 0; i < RTL8367C_ACLTEMPLATENO; i++) - { - if(1 == aclRule[i].valid) - { - noRulesAdd ++; - } - } - - *ruleNum = noRulesAdd; - - if((filter_id + noRulesAdd - 1) > RTL8367C_ACLRULEMAX) - { - return RT_ERR_ENTRY_INDEX; - } - - /*set care tag mask in TAG Indicator*/ - careTagData = 0; - careTagMask = 0; - - for(i = 0; i <= CARE_TAG_IPV6;i++) - { - if(0 == pFilter_cfg->careTag.tagType[i].mask ) - { - careTagMask &= ~(1 << i); - } - else - { - careTagMask |= (1 << i); - if(0 == pFilter_cfg->careTag.tagType[i].value ) - careTagData &= ~(1 << i); - else - careTagData |= (1 << i); - } - } - - for(i = 0; i < RTL8367C_ACLTEMPLATENO; i++) - { - aclRule[i].data_bits.tag_exist = (careTagData) & ACL_RULE_CARETAG_MASK; - aclRule[i].care_bits.tag_exist = (careTagMask) & ACL_RULE_CARETAG_MASK; - } - - RTK_CHK_PORTMASK_VALID(&pFilter_cfg->activeport.value); - RTK_CHK_PORTMASK_VALID(&pFilter_cfg->activeport.mask); - - for(i = 0; i < RTL8367C_ACLTEMPLATENO; i++) - { - if(TRUE == aclRule[i].valid) - { - if(rtk_switch_portmask_L2P_get(&pFilter_cfg->activeport.value, &portmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - - aclRule[i].data_bits.active_portmsk = portmask; - - if(rtk_switch_portmask_L2P_get(&pFilter_cfg->activeport.mask, &portmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - - aclRule[i].care_bits.active_portmsk = portmask; - } - } - - if(pFilter_cfg->invert >= FILTER_INVERT_END ) - return RT_ERR_INPUT; - - - /*Last action gets high priority if actions are the same*/ - memset(&aclAct, 0, sizeof(rtl8367c_acl_act_t)); - aclActCtrl = 0; - for(actType = 0; actType < FILTER_ENACT_END; actType ++) - { - if(pFilter_action->actEnable[actType]) - { - switch (actType) - { - case FILTER_ENACT_CVLAN_INGRESS: - if(pFilter_action->filterCvlanVid > RTL8367C_EVIDMAX) - return RT_ERR_INPUT; - - if((retVal = rtk_vlan_checkAndCreateMbr(pFilter_action->filterCvlanVid, &vidx)) != RT_ERR_OK) - { - return retVal; - } - aclAct.cact = FILTER_ENACT_CVLAN_TYPE(actType); - aclAct.cvidx_cact = vidx; - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_TAGONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_VLANONLY; - } - - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - case FILTER_ENACT_CVLAN_EGRESS: - if(pFilter_action->filterCvlanVid > RTL8367C_EVIDMAX) - return RT_ERR_INPUT; - - if((retVal = rtk_vlan_checkAndCreateMbr(pFilter_action->filterCvlanVid, &vidx)) != RT_ERR_OK) - return retVal; - - aclAct.cact = FILTER_ENACT_CVLAN_TYPE(actType); - aclAct.cvidx_cact = vidx; - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_TAGONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_VLANONLY; - } - - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - case FILTER_ENACT_CVLAN_SVID: - - aclAct.cact = FILTER_ENACT_CVLAN_TYPE(actType); - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_TAGONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_VLANONLY; - } - - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - case FILTER_ENACT_POLICING_1: - if(pFilter_action->filterPolicingIdx[1] >= (RTK_METER_NUM + RTL8367C_MAX_LOG_CNT_NUM)) - return RT_ERR_INPUT; - - aclAct.cact = FILTER_ENACT_CVLAN_TYPE(actType); - aclAct.cvidx_cact = pFilter_action->filterPolicingIdx[1]; - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_TAGONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_VLANONLY; - } - - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - - case FILTER_ENACT_SVLAN_INGRESS: - case FILTER_ENACT_SVLAN_EGRESS: - - if((retVal = rtk_svlan_checkAndCreateMbr(pFilter_action->filterSvlanVid, &svidx)) != RT_ERR_OK) - return retVal; - - aclAct.sact = FILTER_ENACT_SVLAN_TYPE(actType); - aclAct.svidx_sact = svidx; - aclActCtrl |= FILTER_ENACT_SVLAN_MASK; - break; - case FILTER_ENACT_SVLAN_CVID: - - aclAct.sact = FILTER_ENACT_SVLAN_TYPE(actType); - aclActCtrl |= FILTER_ENACT_SVLAN_MASK; - break; - case FILTER_ENACT_POLICING_2: - if(pFilter_action->filterPolicingIdx[2] >= (RTK_METER_NUM + RTL8367C_MAX_LOG_CNT_NUM)) - return RT_ERR_INPUT; - - aclAct.sact = FILTER_ENACT_SVLAN_TYPE(actType); - aclAct.svidx_sact = pFilter_action->filterPolicingIdx[2]; - aclActCtrl |= FILTER_ENACT_SVLAN_MASK; - break; - case FILTER_ENACT_POLICING_0: - if(pFilter_action->filterPolicingIdx[0] >= (RTK_METER_NUM + RTL8367C_MAX_LOG_CNT_NUM)) - return RT_ERR_INPUT; - - aclAct.aclmeteridx = pFilter_action->filterPolicingIdx[0]; - aclActCtrl |= FILTER_ENACT_POLICING_MASK; - break; - case FILTER_ENACT_PRIORITY: - case FILTER_ENACT_1P_REMARK: - if(pFilter_action->filterPriority > RTL8367C_PRIMAX) - return RT_ERR_INPUT; - - aclAct.priact = FILTER_ENACT_PRI_TYPE(actType); - aclAct.pridx = pFilter_action->filterPriority; - aclActCtrl |= FILTER_ENACT_PRIORITY_MASK; - break; - case FILTER_ENACT_DSCP_REMARK: - if(pFilter_action->filterPriority > RTL8367C_DSCPMAX) - return RT_ERR_INPUT; - - aclAct.priact = FILTER_ENACT_PRI_TYPE(actType); - aclAct.pridx = pFilter_action->filterPriority; - aclActCtrl |= FILTER_ENACT_PRIORITY_MASK; - break; - case FILTER_ENACT_POLICING_3: - if(pFilter_action->filterPriority >= (RTK_METER_NUM + RTL8367C_MAX_LOG_CNT_NUM)) - return RT_ERR_INPUT; - - aclAct.priact = FILTER_ENACT_PRI_TYPE(actType); - aclAct.pridx = pFilter_action->filterPolicingIdx[3]; - aclActCtrl |= FILTER_ENACT_PRIORITY_MASK; - break; - case FILTER_ENACT_DROP: - - aclAct.fwdact = FILTER_ENACT_FWD_TYPE(FILTER_ENACT_REDIRECT); - aclAct.fwdact_ext = FALSE; - - aclAct.fwdpmask = 0; - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - case FILTER_ENACT_REDIRECT: - RTK_CHK_PORTMASK_VALID(&pFilter_action->filterPortmask); - - aclAct.fwdact = FILTER_ENACT_FWD_TYPE(actType); - aclAct.fwdact_ext = FALSE; - - if(rtk_switch_portmask_L2P_get(&pFilter_action->filterPortmask, &portmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - aclAct.fwdpmask = portmask; - - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - - case FILTER_ENACT_ADD_DSTPORT: - RTK_CHK_PORTMASK_VALID(&pFilter_action->filterPortmask); - - aclAct.fwdact = FILTER_ENACT_FWD_TYPE(actType); - aclAct.fwdact_ext = FALSE; - - if(rtk_switch_portmask_L2P_get(&pFilter_action->filterPortmask, &portmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - aclAct.fwdpmask = portmask; - - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - case FILTER_ENACT_MIRROR: - RTK_CHK_PORTMASK_VALID(&pFilter_action->filterPortmask); - - aclAct.fwdact = FILTER_ENACT_FWD_TYPE(actType); - aclAct.cact_ext = FALSE; - - if(rtk_switch_portmask_L2P_get(&pFilter_action->filterPortmask, &portmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - aclAct.fwdpmask = portmask; - - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - case FILTER_ENACT_TRAP_CPU: - - aclAct.fwdact = FILTER_ENACT_FWD_TYPE(actType); - aclAct.fwdact_ext = FALSE; - - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - case FILTER_ENACT_COPY_CPU: - if((retVal = rtl8367c_getAsicCputagTrapPort(&cpuPort)) != RT_ERR_OK) - return retVal; - - aclAct.fwdact = FILTER_ENACT_FWD_TYPE(FILTER_ENACT_MIRROR); - aclAct.fwdact_ext = FALSE; - - aclAct.fwdpmask = 1 << cpuPort; - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - case FILTER_ENACT_ISOLATION: - RTK_CHK_PORTMASK_VALID(&pFilter_action->filterPortmask); - - aclAct.fwdact_ext = TRUE; - - if(rtk_switch_portmask_L2P_get(&pFilter_action->filterPortmask, &portmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - aclAct.fwdpmask = portmask; - - aclActCtrl |= FILTER_ENACT_FWD_MASK; - break; - - case FILTER_ENACT_INTERRUPT: - - aclAct.aclint = TRUE; - aclActCtrl |= FILTER_ENACT_INTGPIO_MASK; - break; - case FILTER_ENACT_GPO: - - aclAct.gpio_en = TRUE; - aclAct.gpio_pin = pFilter_action->filterPin; - aclActCtrl |= FILTER_ENACT_INTGPIO_MASK; - break; - case FILTER_ENACT_EGRESSCTAG_TAG: - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_VLANONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_TAGONLY; - } - aclAct.tag_fmt = FILTER_CTAGFMT_TAG; - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - case FILTER_ENACT_EGRESSCTAG_UNTAG: - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_VLANONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_TAGONLY; - } - aclAct.tag_fmt = FILTER_CTAGFMT_UNTAG; - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - case FILTER_ENACT_EGRESSCTAG_KEEP: - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_VLANONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_TAGONLY; - } - aclAct.tag_fmt = FILTER_CTAGFMT_KEEP; - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - case FILTER_ENACT_EGRESSCTAG_KEEPAND1PRMK: - - if(aclActCtrl &(FILTER_ENACT_CVLAN_MASK)) - { - if(aclAct.cact_ext == FILTER_ENACT_CACTEXT_VLANONLY) - aclAct.cact_ext = FILTER_ENACT_CACTEXT_BOTHVLANTAG; - } - else - { - aclAct.cact_ext = FILTER_ENACT_CACTEXT_TAGONLY; - } - aclAct.tag_fmt = FILTER_CTAGFMT_KEEP1PRMK; - aclActCtrl |= FILTER_ENACT_CVLAN_MASK; - break; - default: - return RT_ERR_FILTER_INACL_ACT_NOT_SUPPORT; - } - } - } - - - /*check if free ACL rules are enough*/ - for(i = filter_id; i < (filter_id + noRulesAdd); i++) - { - if((retVal = rtl8367c_getAsicAclRule(i, &tempRule)) != RT_ERR_OK ) - return retVal; - - if(tempRule.valid == TRUE) - { - return RT_ERR_TBL_FULL; - } - } - - ruleId = 0; - for(i = 0; i < RTL8367C_ACLTEMPLATENO; i++) - { - if(aclRule[i].valid == TRUE) - { - /* write ACL action control */ - if((retVal = rtl8367c_setAsicAclActCtrl(filter_id + ruleId, aclActCtrl)) != RT_ERR_OK ) - return retVal; - /* write ACL action */ - if((retVal = rtl8367c_setAsicAclAct(filter_id + ruleId, &aclAct)) != RT_ERR_OK ) - return retVal; - - /* write ACL not */ - if((retVal = rtl8367c_setAsicAclNot(filter_id + ruleId, pFilter_cfg->invert)) != RT_ERR_OK ) - return retVal; - /* write ACL rule */ - if((retVal = rtl8367c_setAsicAclRule(filter_id + ruleId, &aclRule[i])) != RT_ERR_OK ) - return retVal; - - /* only the first rule will be written with input action control, aclActCtrl of other rules will be zero */ - aclActCtrl = 0; - memset(&aclAct, 0, sizeof(rtl8367c_acl_act_t)); - - ruleId ++; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_cfg_del - * Description: - * Delete an ACL configuration from ASIC - * Input: - * filter_id - Start index of ACL configuration. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_ENTRYIDX - Invalid filter_id. - * Note: - * This function delete a group of ACL rules starting from filter_id. - */ -rtk_api_ret_t rtk_filter_igrAcl_cfg_del(rtk_filter_id_t filter_id) -{ - rtl8367c_aclrule initRule; - rtl8367c_acl_act_t initAct; - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(filter_id > RTL8367C_ACLRULEMAX ) - return RT_ERR_FILTER_ENTRYIDX; - - memset(&initRule, 0, sizeof(rtl8367c_aclrule)); - memset(&initAct, 0, sizeof(rtl8367c_acl_act_t)); - - if((ret = rtl8367c_setAsicAclRule(filter_id, &initRule)) != RT_ERR_OK) - return ret; - if((ret = rtl8367c_setAsicAclActCtrl(filter_id, FILTER_ENACT_INIT_MASK))!= RT_ERR_OK) - return ret; - if((ret = rtl8367c_setAsicAclAct(filter_id, &initAct)) != RT_ERR_OK) - return ret; - if((ret = rtl8367c_setAsicAclNot(filter_id, DISABLED)) != RT_ERR_OK ) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_cfg_delAll - * Description: - * Delete all ACL entries from ASIC - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This function delete all ACL configuration from ASIC. - */ -rtk_api_ret_t rtk_filter_igrAcl_cfg_delAll(void) -{ - rtk_uint32 i; - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - for(i = 0; i < RTL8367C_ACLRULENO; i++) - { - if((ret = rtl8367c_setAsicAclActCtrl(i, FILTER_ENACT_INIT_MASK))!= RT_ERR_OK) - return ret; - if((ret = rtl8367c_setAsicAclNot(i, DISABLED)) != RT_ERR_OK ) - return ret; - } - - return rtl8367c_setAsicRegBit(RTL8367C_REG_ACL_RESET_CFG, RTL8367C_ACL_RESET_CFG_OFFSET, TRUE);; -} - -/* Function Name: - * rtk_filter_igrAcl_cfg_get - * Description: - * Get one ingress acl configuration from ASIC. - * Input: - * filter_id - Start index of ACL configuration. - * Output: - * pFilter_cfg - buffer pointer of ingress acl data - * pFilter_action - buffer pointer of ingress acl action - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_action or pFilter_cfg point to NULL. - * RT_ERR_FILTER_ENTRYIDX - Invalid entry index. - * Note: - * This function get configuration from ASIC. - */ -rtk_api_ret_t rtk_filter_igrAcl_cfg_get(rtk_filter_id_t filter_id, rtk_filter_cfg_raw_t *pFilter_cfg, rtk_filter_action_t *pAction) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, tmp; - rtl8367c_aclrule aclRule; - rtl8367c_acl_act_t aclAct; - rtk_uint32 cpuPort; - rtl8367c_acltemplate_t type; - rtl8367c_svlan_memconf_t svlan_cfg; - rtl8367c_vlanconfiguser vlanMC; - rtk_uint32 phyPmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pFilter_cfg || NULL == pAction) - return RT_ERR_NULL_POINTER; - - if(filter_id > RTL8367C_ACLRULEMAX) - return RT_ERR_ENTRY_INDEX; - - if ((retVal = rtl8367c_getAsicAclRule(filter_id, &aclRule)) != RT_ERR_OK) - return retVal; - - /* Check valid */ - if(aclRule.valid == 0) - { - pFilter_cfg->valid = DISABLED; - return RT_ERR_OK; - } - - phyPmask = aclRule.data_bits.active_portmsk; - if(rtk_switch_portmask_P2L_get(phyPmask,&(pFilter_cfg->activeport.value)) != RT_ERR_OK) - return RT_ERR_FAILED; - - phyPmask = aclRule.care_bits.active_portmsk; - if(rtk_switch_portmask_P2L_get(phyPmask,&(pFilter_cfg->activeport.mask)) != RT_ERR_OK) - return RT_ERR_FAILED; - - for(i = 0; i <= CARE_TAG_IPV6; i++) - { - if(aclRule.data_bits.tag_exist & (1 << i)) - pFilter_cfg->careTag.tagType[i].value = 1; - else - pFilter_cfg->careTag.tagType[i].value = 0; - - if (aclRule.care_bits.tag_exist & (1 << i)) - pFilter_cfg->careTag.tagType[i].mask = 1; - else - pFilter_cfg->careTag.tagType[i].mask = 0; - } - - if(filter_advanceCaretagField[aclRule.data_bits.type][0] == TRUE) - { - /* Advanced Care tag setting */ - for(i = CARE_TAG_TCP; i < CARE_TAG_END; i++) - { - if(aclRule.data_bits.field[filter_advanceCaretagField[aclRule.data_bits.type][1]] & (0x0001 << (i-CARE_TAG_TCP)) ) - pFilter_cfg->careTag.tagType[i].value = 1; - else - pFilter_cfg->careTag.tagType[i].value = 0; - - if(aclRule.care_bits.field[filter_advanceCaretagField[aclRule.care_bits.type][1]] & (0x0001 << (i-CARE_TAG_TCP)) ) - pFilter_cfg->careTag.tagType[i].mask = 1; - else - pFilter_cfg->careTag.tagType[i].mask = 0; - } - } - - for(i = 0; i < RTL8367C_ACLRULEFIELDNO; i++) - { - pFilter_cfg->careFieldRaw[i] = aclRule.care_bits.field[i]; - pFilter_cfg->dataFieldRaw[i] = aclRule.data_bits.field[i]; - } - - if ((retVal = rtl8367c_getAsicAclNot(filter_id, &tmp))!= RT_ERR_OK) - return retVal; - - pFilter_cfg->invert = tmp; - - pFilter_cfg->valid = aclRule.valid; - - memset(pAction, 0, sizeof(rtk_filter_action_t)); - - if ((retVal = rtl8367c_getAsicAclActCtrl(filter_id, &tmp))!= RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicAclAct(filter_id, &aclAct)) != RT_ERR_OK) - return retVal; - - if(tmp & FILTER_ENACT_FWD_MASK) - { - if(TRUE == aclAct.fwdact_ext) - { - pAction->actEnable[FILTER_ENACT_ISOLATION] = TRUE; - - phyPmask = aclAct.fwdpmask; - if(rtk_switch_portmask_P2L_get(phyPmask,&(pAction->filterPortmask)) != RT_ERR_OK) - return RT_ERR_FAILED; - } - else if(aclAct.fwdact == RTL8367C_ACL_FWD_TRAP) - { - pAction->actEnable[FILTER_ENACT_TRAP_CPU] = TRUE; - } - else if (aclAct.fwdact == RTL8367C_ACL_FWD_MIRRORFUNTION ) - { - pAction->actEnable[FILTER_ENACT_MIRROR] = TRUE; - - phyPmask = aclAct.fwdpmask; - if(rtk_switch_portmask_P2L_get(phyPmask,&(pAction->filterPortmask)) != RT_ERR_OK) - return RT_ERR_FAILED; - } - else if (aclAct.fwdact == RTL8367C_ACL_FWD_REDIRECT) - { - if(aclAct.fwdpmask == 0 ) - pAction->actEnable[FILTER_ENACT_DROP] = TRUE; - else - { - pAction->actEnable[FILTER_ENACT_REDIRECT] = TRUE; - - phyPmask = aclAct.fwdpmask; - if(rtk_switch_portmask_P2L_get(phyPmask,&(pAction->filterPortmask)) != RT_ERR_OK) - return RT_ERR_FAILED; - } - } - else if (aclAct.fwdact == RTL8367C_ACL_FWD_MIRROR) - { - if((retVal = rtl8367c_getAsicCputagTrapPort(&cpuPort)) != RT_ERR_OK) - return retVal; - if (aclAct.fwdpmask == (1 << cpuPort)) - { - pAction->actEnable[FILTER_ENACT_COPY_CPU] = TRUE; - } - else - { - pAction->actEnable[FILTER_ENACT_ADD_DSTPORT] = TRUE; - - phyPmask = aclAct.fwdpmask; - if(rtk_switch_portmask_P2L_get(phyPmask,&(pAction->filterPortmask)) != RT_ERR_OK) - return RT_ERR_FAILED; - } - } - else - { - return RT_ERR_FAILED; - } - } - - if(tmp & FILTER_ENACT_POLICING_MASK) - { - pAction->actEnable[FILTER_ENACT_POLICING_0] = TRUE; - pAction->filterPolicingIdx[0] = aclAct.aclmeteridx; - } - - if(tmp & FILTER_ENACT_PRIORITY_MASK) - { - if(aclAct.priact == FILTER_ENACT_PRI_TYPE(FILTER_ENACT_PRIORITY)) - { - pAction->actEnable[FILTER_ENACT_PRIORITY] = TRUE; - pAction->filterPriority = aclAct.pridx; - } - else if(aclAct.priact == FILTER_ENACT_PRI_TYPE(FILTER_ENACT_1P_REMARK)) - { - pAction->actEnable[FILTER_ENACT_1P_REMARK] = TRUE; - pAction->filterPriority = aclAct.pridx; - } - else if(aclAct.priact == FILTER_ENACT_PRI_TYPE(FILTER_ENACT_DSCP_REMARK)) - { - pAction->actEnable[FILTER_ENACT_DSCP_REMARK] = TRUE; - pAction->filterPriority = aclAct.pridx; - } - else if(aclAct.priact == FILTER_ENACT_PRI_TYPE(FILTER_ENACT_POLICING_3)) - { - pAction->actEnable[FILTER_ENACT_POLICING_3] = TRUE; - pAction->filterPolicingIdx[3] = aclAct.pridx; - } - } - - if(tmp & FILTER_ENACT_SVLAN_MASK) - { - if(aclAct.sact == FILTER_ENACT_SVLAN_TYPE(FILTER_ENACT_SVLAN_INGRESS)) - { - if((retVal = rtl8367c_getAsicSvlanMemberConfiguration(aclAct.svidx_sact, &svlan_cfg)) != RT_ERR_OK) - return retVal; - - pAction->actEnable[FILTER_ENACT_SVLAN_INGRESS] = TRUE; - pAction->filterSvlanIdx = aclAct.svidx_sact; - pAction->filterSvlanVid = svlan_cfg.vs_svid; - } - else if(aclAct.sact == FILTER_ENACT_SVLAN_TYPE(FILTER_ENACT_SVLAN_EGRESS)) - { - if((retVal = rtl8367c_getAsicSvlanMemberConfiguration(aclAct.svidx_sact, &svlan_cfg)) != RT_ERR_OK) - return retVal; - - pAction->actEnable[FILTER_ENACT_SVLAN_EGRESS] = TRUE; - pAction->filterSvlanIdx = aclAct.svidx_sact; - pAction->filterSvlanVid = svlan_cfg.vs_svid; - } - else if(aclAct.sact == FILTER_ENACT_SVLAN_TYPE(FILTER_ENACT_SVLAN_CVID)) - pAction->actEnable[FILTER_ENACT_SVLAN_CVID] = TRUE; - else if(aclAct.sact == FILTER_ENACT_SVLAN_TYPE(FILTER_ENACT_POLICING_2)) - { - pAction->actEnable[FILTER_ENACT_POLICING_2] = TRUE; - pAction->filterPolicingIdx[2] = aclAct.svidx_sact; - } - } - - - if(tmp & FILTER_ENACT_CVLAN_MASK) - { - if(FILTER_ENACT_CACTEXT_TAGONLY == aclAct.cact_ext || - FILTER_ENACT_CACTEXT_BOTHVLANTAG == aclAct.cact_ext ) - { - if(FILTER_CTAGFMT_UNTAG == aclAct.tag_fmt) - { - pAction->actEnable[FILTER_ENACT_EGRESSCTAG_UNTAG] = TRUE; - } - else if(FILTER_CTAGFMT_TAG == aclAct.tag_fmt) - { - pAction->actEnable[FILTER_ENACT_EGRESSCTAG_TAG] = TRUE; - } - else if(FILTER_CTAGFMT_KEEP == aclAct.tag_fmt) - { - pAction->actEnable[FILTER_ENACT_EGRESSCTAG_KEEP] = TRUE; - } - else if(FILTER_CTAGFMT_KEEP1PRMK== aclAct.tag_fmt) - { - pAction->actEnable[FILTER_ENACT_EGRESSCTAG_KEEPAND1PRMK] = TRUE; - } - - } - - if(FILTER_ENACT_CACTEXT_VLANONLY == aclAct.cact_ext || - FILTER_ENACT_CACTEXT_BOTHVLANTAG == aclAct.cact_ext ) - { - if(aclAct.cact == FILTER_ENACT_CVLAN_TYPE(FILTER_ENACT_CVLAN_INGRESS)) - { - if((retVal = rtl8367c_getAsicVlanMemberConfig(aclAct.cvidx_cact, &vlanMC)) != RT_ERR_OK) - return retVal; - - pAction->actEnable[FILTER_ENACT_CVLAN_INGRESS] = TRUE; - pAction->filterCvlanIdx = aclAct.cvidx_cact; - pAction->filterCvlanVid = vlanMC.evid; - } - else if(aclAct.cact == FILTER_ENACT_CVLAN_TYPE(FILTER_ENACT_CVLAN_EGRESS)) - { - if((retVal = rtl8367c_getAsicVlanMemberConfig(aclAct.cvidx_cact, &vlanMC)) != RT_ERR_OK) - return retVal; - - pAction->actEnable[FILTER_ENACT_CVLAN_EGRESS] = TRUE; - pAction->filterCvlanIdx = aclAct.cvidx_cact; - pAction->filterCvlanVid = vlanMC.evid; - } - else if(aclAct.cact == FILTER_ENACT_CVLAN_TYPE(FILTER_ENACT_CVLAN_SVID)) - { - pAction->actEnable[FILTER_ENACT_CVLAN_SVID] = TRUE; - } - else if(aclAct.cact == FILTER_ENACT_CVLAN_TYPE(FILTER_ENACT_POLICING_1)) - { - pAction->actEnable[FILTER_ENACT_POLICING_1] = TRUE; - pAction->filterPolicingIdx[1] = aclAct.cvidx_cact; - } - } - } - - if(tmp & FILTER_ENACT_INTGPIO_MASK) - { - if(TRUE == aclAct.aclint) - { - pAction->actEnable[FILTER_ENACT_INTERRUPT] = TRUE; - } - - if(TRUE == aclAct.gpio_en) - { - pAction->actEnable[FILTER_ENACT_GPO] = TRUE; - pAction->filterPin = aclAct.gpio_pin; - } - } - - /* Get field type of RAW data */ - if ((retVal = rtl8367c_getAsicAclTemplate(aclRule.data_bits.type, &type))!= RT_ERR_OK) - return retVal; - - for(i = 0; i < RTL8367C_ACLRULEFIELDNO; i++) - { - pFilter_cfg->fieldRawType[i] = type.field[i]; - }/* end of for(i...) */ - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_unmatchAction_set - * Description: - * Set action to packets when no ACL configuration match - * Input: - * port - Port id. - * action - Action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function sets action of packets when no ACL configruation matches. - */ -rtk_api_ret_t rtk_filter_igrAcl_unmatchAction_set(rtk_port_t port, rtk_filter_unmatch_action_t action) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(action >= FILTER_UNMATCH_END) - return RT_ERR_INPUT; - - if((ret = rtl8367c_setAsicAclUnmatchedPermit(rtk_switch_port_L2P_get(port), action)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_unmatchAction_get - * Description: - * Get action to packets when no ACL configuration match - * Input: - * port - Port id. - * Output: - * pAction - Action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function gets action of packets when no ACL configruation matches. - */ -rtk_api_ret_t rtk_filter_igrAcl_unmatchAction_get(rtk_port_t port, rtk_filter_unmatch_action_t* pAction) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if((ret = rtl8367c_getAsicAclUnmatchedPermit(rtk_switch_port_L2P_get(port), pAction)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_state_set - * Description: - * Set state of ingress ACL. - * Input: - * port - Port id. - * state - Ingress ACL state. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function gets action of packets when no ACL configruation matches. - */ -rtk_api_ret_t rtk_filter_igrAcl_state_set(rtk_port_t port, rtk_filter_state_t state) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(state >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if((ret = rtl8367c_setAsicAcl(rtk_switch_port_L2P_get(port), state)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_state_get - * Description: - * Get state of ingress ACL. - * Input: - * port - Port id. - * Output: - * pState - Ingress ACL state. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function gets action of packets when no ACL configruation matches. - */ -rtk_api_ret_t rtk_filter_igrAcl_state_get(rtk_port_t port, rtk_filter_state_t* pState) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pState) - return RT_ERR_NULL_POINTER; - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if((ret = rtl8367c_getAsicAcl(rtk_switch_port_L2P_get(port), pState)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} -/* Function Name: - * rtk_filter_igrAcl_template_set - * Description: - * Set template of ingress ACL. - * Input: - * template - Ingress ACL template - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function set ACL template. - */ -rtk_api_ret_t rtk_filter_igrAcl_template_set(rtk_filter_template_t *aclTemplate) -{ - rtk_api_ret_t retVal; - rtk_uint32 idxField; - rtl8367c_acltemplate_t aclType; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(aclTemplate->index >= RTK_MAX_NUM_OF_FILTER_TYPE) - return RT_ERR_INPUT; - - for(idxField = 0; idxField < RTK_MAX_NUM_OF_FILTER_FIELD; idxField++) - { - if(aclTemplate->fieldType[idxField] < FILTER_FIELD_RAW_DMAC_15_0 || - (aclTemplate->fieldType[idxField] > FILTER_FIELD_RAW_CTAG && aclTemplate->fieldType[idxField] < FILTER_FIELD_RAW_IPV4_SIP_15_0 ) || - (aclTemplate->fieldType[idxField] > FILTER_FIELD_RAW_IPV4_DIP_31_16 && aclTemplate->fieldType[idxField] < FILTER_FIELD_RAW_IPV6_SIP_15_0 ) || - (aclTemplate->fieldType[idxField] > FILTER_FIELD_RAW_IPV6_DIP_31_16 && aclTemplate->fieldType[idxField] < FILTER_FIELD_RAW_VIDRANGE ) || - (aclTemplate->fieldType[idxField] > FILTER_FIELD_RAW_FIELD_VALID && aclTemplate->fieldType[idxField] < FILTER_FIELD_RAW_FIELD_SELECT00 ) || - aclTemplate->fieldType[idxField] >= FILTER_FIELD_RAW_END) - { - return RT_ERR_INPUT; - } - } - - for(idxField = 0; idxField < RTK_MAX_NUM_OF_FILTER_FIELD; idxField++) - { - aclType.field[idxField] = aclTemplate->fieldType[idxField]; - } - - if((retVal = rtl8367c_setAsicAclTemplate(aclTemplate->index, &aclType)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_template_get - * Description: - * Get template of ingress ACL. - * Input: - * template - Ingress ACL template - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This function gets template of ACL. - */ -rtk_api_ret_t rtk_filter_igrAcl_template_get(rtk_filter_template_t *aclTemplate) -{ - rtk_api_ret_t ret; - rtk_uint32 idxField; - rtl8367c_acltemplate_t aclType; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == aclTemplate) - return RT_ERR_NULL_POINTER; - - if(aclTemplate->index >= RTK_MAX_NUM_OF_FILTER_TYPE) - return RT_ERR_INPUT; - - if((ret = rtl8367c_getAsicAclTemplate(aclTemplate->index, &aclType)) != RT_ERR_OK) - return ret; - - for(idxField = 0; idxField < RTK_MAX_NUM_OF_FILTER_FIELD; idxField ++) - { - aclTemplate->fieldType[idxField] = aclType.field[idxField]; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_field_sel_set - * Description: - * Set user defined field selectors in HSB - * Input: - * index - index of field selector 0-15 - * format - Format of field selector - * offset - Retrieving data offset - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * System support 16 user defined field selctors. - * Each selector can be enabled or disable. - * User can defined retrieving 16-bits in many predefiend - * standard l2/l3/l4 payload. - */ -rtk_api_ret_t rtk_filter_igrAcl_field_sel_set(rtk_uint32 index, rtk_field_sel_t format, rtk_uint32 offset) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(index >= RTL8367C_FIELDSEL_FORMAT_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - if(format >= FORMAT_END) - return RT_ERR_OUT_OF_RANGE; - - if(offset > RTL8367C_FIELDSEL_MAX_OFFSET) - return RT_ERR_OUT_OF_RANGE; - - if((ret = rtl8367c_setAsicFieldSelector(index, (rtk_uint32)format, offset)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAcl_field_sel_get - * Description: - * Get user defined field selectors in HSB - * Input: - * index - index of field selector 0-15 - * Output: - * pFormat - Format of field selector - * pOffset - Retrieving data offset - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -rtk_api_ret_t rtk_filter_igrAcl_field_sel_get(rtk_uint32 index, rtk_field_sel_t *pFormat, rtk_uint32 *pOffset) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pFormat || NULL == pOffset) - return RT_ERR_NULL_POINTER; - - if(index >= RTL8367C_FIELDSEL_FORMAT_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - if((ret = rtl8367c_getAsicFieldSelector(index, pFormat, pOffset)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_iprange_set - * Description: - * Set IP Range check - * Input: - * index - index of IP Range 0-15 - * type - IP Range check type, 0:Delete a entry, 1: IPv4_SIP, 2: IPv4_DIP, 3:IPv6_SIP, 4:IPv6_DIP - * upperIp - The upper bound of IP range - * lowerIp - The lower Bound of IP range - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * upperIp must be larger or equal than lowerIp. - */ -rtk_api_ret_t rtk_filter_iprange_set(rtk_uint32 index, rtk_filter_iprange_t type, ipaddr_t upperIp, ipaddr_t lowerIp) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(type >= IPRANGE_END) - return RT_ERR_OUT_OF_RANGE; - - if(lowerIp > upperIp) - return RT_ERR_INPUT; - - if((ret = rtl8367c_setAsicAclIpRange(index, type, upperIp, lowerIp)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_iprange_get - * Description: - * Set IP Range check - * Input: - * index - index of IP Range 0-15 - * Output: - * pType - IP Range check type, 0:Delete a entry, 1: IPv4_SIP, 2: IPv4_DIP, 3:IPv6_SIP, 4:IPv6_DIP - * pUpperIp - The upper bound of IP range - * pLowerIp - The lower Bound of IP range - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * Note: - * None. - */ -rtk_api_ret_t rtk_filter_iprange_get(rtk_uint32 index, rtk_filter_iprange_t *pType, ipaddr_t *pUpperIp, ipaddr_t *pLowerIp) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if((NULL == pType) || (NULL == pUpperIp) || (NULL == pLowerIp)) - return RT_ERR_NULL_POINTER; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - if((ret = rtl8367c_getAsicAclIpRange(index, pType, pUpperIp, pLowerIp)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_vidrange_set - * Description: - * Set VID Range check - * Input: - * index - index of VID Range 0-15 - * type - IP Range check type, 0:Delete a entry, 1: CVID, 2: SVID - * upperVid - The upper bound of VID range - * lowerVid - The lower Bound of VID range - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * upperVid must be larger or equal than lowerVid. - */ -rtk_api_ret_t rtk_filter_vidrange_set(rtk_uint32 index, rtk_filter_vidrange_t type, rtk_uint32 upperVid, rtk_uint32 lowerVid) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(type >= VIDRANGE_END) - return RT_ERR_OUT_OF_RANGE; - - if(lowerVid > upperVid) - return RT_ERR_INPUT; - - if( (upperVid > RTL8367C_VIDMAX) || (lowerVid > RTL8367C_VIDMAX)) - return RT_ERR_OUT_OF_RANGE; - - if((ret = rtl8367c_setAsicAclVidRange(index, type, upperVid, lowerVid)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_vidrange_get - * Description: - * Get VID Range check - * Input: - * index - index of VID Range 0-15 - * Output: - * pType - IP Range check type, 0:Unused, 1: CVID, 2: SVID - * pUpperVid - The upper bound of VID range - * pLowerVid - The lower Bound of VID range - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * Note: - * None. - */ -rtk_api_ret_t rtk_filter_vidrange_get(rtk_uint32 index, rtk_filter_vidrange_t *pType, rtk_uint32 *pUpperVid, rtk_uint32 *pLowerVid) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if((NULL == pType) || (NULL == pUpperVid) || (NULL == pLowerVid)) - return RT_ERR_NULL_POINTER; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - if((ret = rtl8367c_getAsicAclVidRange(index, pType, pUpperVid, pLowerVid)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_portrange_set - * Description: - * Set Port Range check - * Input: - * index - index of Port Range 0-15 - * type - IP Range check type, 0:Delete a entry, 1: Source Port, 2: Destnation Port - * upperPort - The upper bound of Port range - * lowerPort - The lower Bound of Port range - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * upperPort must be larger or equal than lowerPort. - */ -rtk_api_ret_t rtk_filter_portrange_set(rtk_uint32 index, rtk_filter_portrange_t type, rtk_uint32 upperPort, rtk_uint32 lowerPort) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(type >= PORTRANGE_END) - return RT_ERR_OUT_OF_RANGE; - - if(lowerPort > upperPort) - return RT_ERR_INPUT; - - if(upperPort > RTL8367C_ACL_PORTRANGEMAX) - return RT_ERR_INPUT; - - if(lowerPort > RTL8367C_ACL_PORTRANGEMAX) - return RT_ERR_INPUT; - - if((ret = rtl8367c_setAsicAclPortRange(index, type, upperPort, lowerPort)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_portrange_get - * Description: - * Set Port Range check - * Input: - * index - index of Port Range 0-15 - * Output: - * pType - IP Range check type, 0:Delete a entry, 1: Source Port, 2: Destnation Port - * pUpperPort - The upper bound of Port range - * pLowerPort - The lower Bound of Port range - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * None. - */ -rtk_api_ret_t rtk_filter_portrange_get(rtk_uint32 index, rtk_filter_portrange_t *pType, rtk_uint32 *pUpperPort, rtk_uint32 *pLowerPort) -{ - rtk_api_ret_t ret; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if((NULL == pType) || (NULL == pUpperPort) || (NULL == pLowerPort)) - return RT_ERR_NULL_POINTER; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - if((ret = rtl8367c_getAsicAclPortRange(index, pType, pUpperPort, pLowerPort)) != RT_ERR_OK) - return ret; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_filter_igrAclPolarity_set - * Description: - * Set ACL Goip control palarity - * Input: - * polarity - 1: High, 0: Low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * none - */ -rtk_api_ret_t rtk_filter_igrAclPolarity_set(rtk_uint32 polarity) -{ - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(polarity > 1) - return RT_ERR_OUT_OF_RANGE; - return rtl8367c_setAsicAclGpioPolarity(polarity); -} -/* Function Name: - * rtk_filter_igrAclPolarity_get - * Description: - * Get ACL Goip control palarity - * Input: - * pPolarity - 1: High, 0: Low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * none - */ -rtk_api_ret_t rtk_filter_igrAclPolarity_get(rtk_uint32* pPolarity) -{ - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPolarity) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicAclGpioPolarity(pPolarity); -} - - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/cpu.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/cpu.c deleted file mode 100644 index d1cd95b37a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/cpu.c +++ /dev/null @@ -1,537 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in CPU module. - * - */ - -#include -#include -#include -#include - -#include -#include - -/* Function Name: - * rtk_cpu_enable_set - * Description: - * Set CPU port function enable/disable. - * Input: - * enable - CPU port function enable - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can set CPU port function enable/disable. - */ -rtk_api_ret_t rtk_cpu_enable_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicCputagEnable(enable)) != RT_ERR_OK) - return retVal; - - if (DISABLED == enable) - { - if ((retVal = rtl8367c_setAsicCputagPortmask(0)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_enable_get - * Description: - * Get CPU port and its setting. - * Input: - * None - * Output: - * pEnable - CPU port function enable - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_L2_NO_CPU_PORT - CPU port is not exist - * Note: - * The API can get CPU port function enable/disable. - */ -rtk_api_ret_t rtk_cpu_enable_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicCputagEnable(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_tagPort_set - * Description: - * Set CPU port and CPU tag insert mode. - * Input: - * port - Port id. - * mode - CPU tag insert for packets egress from CPU port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can set CPU port and inserting proprietary CPU tag mode (Length/Type 0x8899) - * to the frame that transmitting to CPU port. - * The inset cpu tag mode is as following: - * - CPU_INSERT_TO_ALL - * - CPU_INSERT_TO_TRAPPING - * - CPU_INSERT_TO_NONE - */ -rtk_api_ret_t rtk_cpu_tagPort_set(rtk_port_t port, rtk_cpu_insert_t mode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (mode >= CPU_INSERT_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicCputagPortmask(1<= CPU_POS_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicCputagPosition(position)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_tagPosition_get - * Description: - * Get CPU tag position. - * Input: - * None - * Output: - * pPosition - CPU tag position. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can get CPU tag position. - */ -rtk_api_ret_t rtk_cpu_tagPosition_get(rtk_cpu_position_t *pPosition) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPosition) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicCputagPosition(pPosition)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_tagLength_set - * Description: - * Set CPU tag length. - * Input: - * length - CPU tag length. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can set CPU tag length. - */ -rtk_api_ret_t rtk_cpu_tagLength_set(rtk_cpu_tag_length_t length) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (length >= CPU_LEN_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicCputagMode(length)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_tagLength_get - * Description: - * Get CPU tag length. - * Input: - * None - * Output: - * pLength - CPU tag length. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can get CPU tag length. - */ -rtk_api_ret_t rtk_cpu_tagLength_get(rtk_cpu_tag_length_t *pLength) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pLength) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicCputagMode(pLength)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_priRemap_set - * Description: - * Configure CPU priorities mapping to internal absolute priority. - * Input: - * int_pri - internal priority value. - * new_pri - new internal priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of CPU tag assignment for internal asic priority, and it is used for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_cpu_priRemap_set(rtk_pri_t int_pri, rtk_pri_t new_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (new_pri > RTL8367C_PRIMAX || int_pri > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if ((retVal = rtl8367c_setAsicCputagPriorityRemapping(int_pri, new_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_priRemap_get - * Description: - * Configure CPU priorities mapping to internal absolute priority. - * Input: - * int_pri - internal priority value. - * Output: - * pNew_pri - new internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of CPU tag assignment for internal asic priority, and it is used for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_cpu_priRemap_get(rtk_pri_t int_pri, rtk_pri_t *pNew_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pNew_pri) - return RT_ERR_NULL_POINTER; - - if (int_pri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_getAsicCputagPriorityRemapping(int_pri, pNew_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_acceptLength_set - * Description: - * Set CPU accept length. - * Input: - * length - CPU tag length. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can set CPU accept length. - */ -rtk_api_ret_t rtk_cpu_acceptLength_set(rtk_cpu_rx_length_t length) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (length >= CPU_RX_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicCputagRxMinLength(length)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_cpu_acceptLength_get - * Description: - * Get CPU accept length. - * Input: - * None - * Output: - * pLength - CPU tag length. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can get CPU accept length. - */ -rtk_api_ret_t rtk_cpu_acceptLength_get(rtk_cpu_rx_length_t *pLength) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pLength) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicCputagRxMinLength(pLength)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c deleted file mode 100644 index c9b146a6d8..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c +++ /dev/null @@ -1,843 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 75783 $ - * $Date: 2017-02-13 14:54:53 +0800 (週一, 13 二月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in 1X module. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Function Name: - * rtk_dot1x_unauthPacketOper_set - * Description: - * Set 802.1x unauth action configuration. - * Input: - * port - Port id. - * unauth_action - 802.1X unauth action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * This API can set 802.1x unauth action configuration. - * The unauth action is as following: - * - DOT1X_ACTION_DROP - * - DOT1X_ACTION_TRAP2CPU - * - DOT1X_ACTION_GUESTVLAN - */ -rtk_api_ret_t rtk_dot1x_unauthPacketOper_set(rtk_port_t port, rtk_dot1x_unauth_action_t unauth_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (unauth_action >= DOT1X_ACTION_END) - return RT_ERR_DOT1X_PROC; - - if ((retVal = rtl8367c_setAsic1xProcConfig(rtk_switch_port_L2P_get(port), unauth_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_unauthPacketOper_get - * Description: - * Get 802.1x unauth action configuration. - * Input: - * port - Port id. - * Output: - * pUnauth_action - 802.1X unauth action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get 802.1x unauth action configuration. - * The unauth action is as following: - * - DOT1X_ACTION_DROP - * - DOT1X_ACTION_TRAP2CPU - * - DOT1X_ACTION_GUESTVLAN - */ -rtk_api_ret_t rtk_dot1x_unauthPacketOper_get(rtk_port_t port, rtk_dot1x_unauth_action_t *pUnauth_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pUnauth_action) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xProcConfig(rtk_switch_port_L2P_get(port), pUnauth_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_eapolFrame2CpuEnable_set - * Description: - * Set 802.1x EAPOL packet trap to CPU configuration - * Input: - * enable - The status of 802.1x EAPOL packet. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * To support 802.1x authentication functionality, EAPOL frame (ether type = 0x888E) has to - * be trapped to CPU. - * The status of EAPOL frame trap to CPU is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_eapolFrame2CpuEnable_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_getAsicRma(3, &rmacfg)) != RT_ERR_OK) - return retVal; - - if (ENABLED == enable) - rmacfg.operation = RMAOP_TRAP_TO_CPU; - else if (DISABLED == enable) - rmacfg.operation = RMAOP_FORWARD; - - if ((retVal = rtl8367c_setAsicRma(3, &rmacfg)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_eapolFrame2CpuEnable_get - * Description: - * Get 802.1x EAPOL packet trap to CPU configuration - * Input: - * None - * Output: - * pEnable - The status of 802.1x EAPOL packet. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * To support 802.1x authentication functionality, EAPOL frame (ether type = 0x888E) has to - * be trapped to CPU. - * The status of EAPOL frame trap to CPU is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_eapolFrame2CpuEnable_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicRma(3, &rmacfg)) != RT_ERR_OK) - return retVal; - - if (RMAOP_TRAP_TO_CPU == rmacfg.operation) - *pEnable = ENABLED; - else - *pEnable = DISABLED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedEnable_set - * Description: - * Set 802.1x port-based enable configuration - * Input: - * port - Port id. - * enable - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_PORTBASEDPNEN - 802.1X port-based enable error - * Note: - * The API can update the port-based port enable register content. If a port is 802.1x - * port based network access control "enabled", it should be authenticated so packets - * from that port won't be dropped or trapped to CPU. - * The status of 802.1x port-based network access control is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_portBasedEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsic1xPBEnConfig(rtk_switch_port_L2P_get(port),enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedEnable_get - * Description: - * Get 802.1x port-based enable configuration - * Input: - * port - Port id. - * Output: - * pEnable - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get the 802.1x port-based port status. - */ -rtk_api_ret_t rtk_dot1x_portBasedEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xPBEnConfig(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedAuthStatus_set - * Description: - * Set 802.1x port-based auth. port configuration - * Input: - * port - Port id. - * port_auth - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_DOT1X_PORTBASEDAUTH - 802.1X port-based auth error - * Note: - * The authenticated status of 802.1x port-based network access control is as following: - * - UNAUTH - * - AUTH - */ -rtk_api_ret_t rtk_dot1x_portBasedAuthStatus_set(rtk_port_t port, rtk_dot1x_auth_status_t port_auth) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (port_auth >= AUTH_STATUS_END) - return RT_ERR_DOT1X_PORTBASEDAUTH; - - if ((retVal = rtl8367c_setAsic1xPBAuthConfig(rtk_switch_port_L2P_get(port), port_auth)) != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedAuthStatus_get - * Description: - * Get 802.1x port-based auth. port configuration - * Input: - * port - Port id. - * Output: - * pPort_auth - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1x port-based port auth.information. - */ -rtk_api_ret_t rtk_dot1x_portBasedAuthStatus_get(rtk_port_t port, rtk_dot1x_auth_status_t *pPort_auth) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPort_auth) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsic1xPBAuthConfig(rtk_switch_port_L2P_get(port), pPort_auth)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedDirection_set - * Description: - * Set 802.1x port-based operational direction configuration - * Input: - * port - Port id. - * port_direction - Operation direction - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_DOT1X_PORTBASEDOPDIR - 802.1X port-based operation direction error - * Note: - * The operate controlled direction of 802.1x port-based network access control is as following: - * - BOTH - * - IN - */ -rtk_api_ret_t rtk_dot1x_portBasedDirection_set(rtk_port_t port, rtk_dot1x_direction_t port_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (port_direction >= DIRECTION_END) - return RT_ERR_DOT1X_PORTBASEDOPDIR; - - if ((retVal = rtl8367c_setAsic1xPBOpdirConfig(rtk_switch_port_L2P_get(port), port_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedDirection_get - * Description: - * Get 802.1X port-based operational direction configuration - * Input: - * port - Port id. - * Output: - * pPort_direction - Operation direction - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1x port-based operational direction information. - */ -rtk_api_ret_t rtk_dot1x_portBasedDirection_get(rtk_port_t port, rtk_dot1x_direction_t *pPort_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPort_direction) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsic1xPBOpdirConfig(rtk_switch_port_L2P_get(port), pPort_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedEnable_set - * Description: - * Set 802.1x mac-based port enable configuration - * Input: - * port - Port id. - * enable - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_MACBASEDPNEN - 802.1X mac-based enable error - * Note: - * If a port is 802.1x MAC based network access control "enabled", the incoming packets should - * be authenticated so packets from that port won't be dropped or trapped to CPU. - * The status of 802.1x MAC-based network access control is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_macBasedEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsic1xMBEnConfig(rtk_switch_port_L2P_get(port),enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedEnable_get - * Description: - * Get 802.1x mac-based port enable configuration - * Input: - * port - Port id. - * Output: - * pEnable - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * If a port is 802.1x MAC based network access control "enabled", the incoming packets should - * be authenticated so packets from that port wont be dropped or trapped to CPU. - * The status of 802.1x MAC-based network access control is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_macBasedEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsic1xMBEnConfig(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedAuthMac_add - * Description: - * Add an authenticated MAC to ASIC - * Input: - * port - Port id. - * pAuth_mac - The authenticated MAC. - * fid - filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_MACBASEDPNEN - 802.1X mac-based enable error - * Note: - * The API can add a 802.1x authenticated MAC address to port. If the MAC does not exist in LUT, - * user can't add this MAC to auth status. - */ -rtk_api_ret_t rtk_dot1x_macBasedAuthMac_add(rtk_port_t port, rtk_mac_t *pAuth_mac, rtk_fid_t fid) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pAuth_mac == NULL) || (pAuth_mac->octet[0] & 0x1)) - return RT_ERR_MAC; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if ( RT_ERR_OK == retVal) - { - if (l2Table.spa != rtk_switch_port_L2P_get(port)) - return RT_ERR_DOT1X_MAC_PORT_MISMATCH; - - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - l2Table.efid = 0; - l2Table.auth = 1; - retVal = rtl8367c_setAsicL2LookupTb(&l2Table); - return retVal; - } - else - return retVal; - -} - -/* Function Name: - * rtk_dot1x_macBasedAuthMac_del - * Description: - * Delete an authenticated MAC to ASIC - * Input: - * port - Port id. - * pAuth_mac - The authenticated MAC. - * fid - filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can delete a 802.1x authenticated MAC address to port. It only change the auth status of - * the MAC and won't delete it from LUT. - */ -rtk_api_ret_t rtk_dot1x_macBasedAuthMac_del(rtk_port_t port, rtk_mac_t *pAuth_mac, rtk_fid_t fid) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pAuth_mac == NULL) || (pAuth_mac->octet[0] & 0x1)) - return RT_ERR_MAC; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - if (l2Table.spa != rtk_switch_port_L2P_get(port)) - return RT_ERR_DOT1X_MAC_PORT_MISMATCH; - - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - l2Table.auth = 0; - retVal = rtl8367c_setAsicL2LookupTb(&l2Table); - return retVal; - } - else - return retVal; - -} - -/* Function Name: - * rtk_dot1x_macBasedDirection_set - * Description: - * Set 802.1x mac-based operational direction configuration - * Input: - * mac_direction - Operation direction - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_DOT1X_MACBASEDOPDIR - 802.1X mac-based operation direction error - * Note: - * The operate controlled direction of 802.1x mac-based network access control is as following: - * - BOTH - * - IN - */ -rtk_api_ret_t rtk_dot1x_macBasedDirection_set(rtk_dot1x_direction_t mac_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (mac_direction >= DIRECTION_END) - return RT_ERR_DOT1X_MACBASEDOPDIR; - - if ((retVal = rtl8367c_setAsic1xMBOpdirConfig(mac_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedDirection_get - * Description: - * Get 802.1x mac-based operational direction configuration - * Input: - * port - Port id. - * Output: - * pMac_direction - Operation direction - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x mac-based operational direction information. - */ -rtk_api_ret_t rtk_dot1x_macBasedDirection_get(rtk_dot1x_direction_t *pMac_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMac_direction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xMBOpdirConfig(pMac_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * Set 802.1x guest VLAN configuration - * Description: - * Set 802.1x mac-based operational direction configuration - * Input: - * vid - 802.1x guest VLAN ID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The operate controlled 802.1x guest VLAN - */ -rtk_api_ret_t rtk_dot1x_guestVlan_set(rtk_vlan_t vid) -{ - rtk_api_ret_t retVal; - rtk_uint32 index; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~4095 */ - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if((retVal = rtk_vlan_checkAndCreateMbr(vid, &index)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsic1xGuestVidx(index)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_guestVlan_get - * Description: - * Get 802.1x guest VLAN configuration - * Input: - * None - * Output: - * pVid - 802.1x guest VLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x guest VLAN information. - */ -rtk_api_ret_t rtk_dot1x_guestVlan_get(rtk_vlan_t *pVid) -{ - rtk_api_ret_t retVal; - rtk_uint32 gvidx; - rtl8367c_vlanconfiguser vlanMC; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pVid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xGuestVidx(&gvidx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicVlanMemberConfig(gvidx, &vlanMC)) != RT_ERR_OK) - return retVal; - - *pVid = vlanMC.evid; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_guestVlan2Auth_set - * Description: - * Set 802.1x guest VLAN to auth host configuration - * Input: - * enable - The status of guest VLAN to auth host. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The operational direction of 802.1x guest VLAN to auth host control is as following: - * - ENABLED - * - DISABLED - */ -rtk_api_ret_t rtk_dot1x_guestVlan2Auth_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsic1xGVOpdir(enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_guestVlan2Auth_get - * Description: - * Get 802.1x guest VLAN to auth host configuration - * Input: - * None - * Output: - * pEnable - The status of guest VLAN to auth host. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x guest VLAN to auth host information. - */ -rtk_api_ret_t rtk_dot1x_guestVlan2Auth_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xGVOpdir(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/eee.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/eee.c deleted file mode 100644 index cd14c2ce13..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/eee.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 48156 $ - * $Date: 2014-05-29 16:39:06 +0800 (週四, 29 五月 2014) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in EEE module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -/* Function Name: - * rtk_eee_init - * Description: - * EEE function initialization. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is used to initialize EEE status. - */ -rtk_api_ret_t rtk_eee_init(void) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if((retVal = rtl8367c_setAsicRegBit(0x0018, 10, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x0018, 11, 1)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_eee_portEnable_set - * Description: - * Set enable status of EEE function. - * Input: - * port - port id. - * enable - enable EEE status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set EEE function to the specific port. - * The configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -rtk_api_ret_t rtk_eee_portEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - rtk_uint32 phy_port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port is UTP port */ - RTK_CHK_PORT_IS_UTP(port); - - if (enable>=RTK_ENABLE_END) - return RT_ERR_INPUT; - - phy_port = rtk_switch_port_L2P_get(port); - - if ((retVal = rtl8367c_setAsicEee100M(phy_port,enable))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicEeeGiga(phy_port,enable))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPHYReg(phy_port, RTL8367C_PHY_PAGE_ADDRESS, 0))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicPHYReg(phy_port, 0, ®Data))!=RT_ERR_OK) - return retVal; - regData |= 0x0200; - if ((retVal = rtl8367c_setAsicPHYReg(phy_port, 0, regData))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_eee_portEnable_get - * Description: - * Get enable status of EEE function - * Input: - * port - Port id. - * Output: - * pEnable - Back pressure status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get EEE function to the specific port. - * The configuration of the port is as following: - * - DISABLE - * - ENABLE - */ - -rtk_api_ret_t rtk_eee_portEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData1, regData2; - rtk_uint32 phy_port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port is UTP port */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - phy_port = rtk_switch_port_L2P_get(port); - - if ((retVal = rtl8367c_getAsicEee100M(phy_port,®Data1))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicEeeGiga(phy_port,®Data2))!=RT_ERR_OK) - return retVal; - - if (regData1==1&®Data2==1) - *pEnable = ENABLED; - else - *pEnable = DISABLED; - - return RT_ERR_OK; -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/i2c.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/i2c.c deleted file mode 100644 index 17a5f3785b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/i2c.c +++ /dev/null @@ -1,436 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 63932 $ - * $Date: 2015-12-08 14:06:29 +0800 (周二, 08 十二月 2015) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in i2c module. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - - -static rtk_I2C_16bit_mode_t rtk_i2c_mode = I2C_LSB_16BIT_MODE; - - -/* Function Name: - * rtk_i2c_init - * Description: - * I2C smart function initialization. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * Note: - * This API is used to initialize EEE status. - * need used GPIO pins - * OpenDrain and clock - */ -rtk_api_ret_t rtk_i2c_init(void) -{ - rtk_uint32 retVal; - switch_chip_t ChipID; - /* probe switch */ - if((retVal = rtk_switch_probe(&ChipID)) != RT_ERR_OK) - return retVal; - - if( ChipID == CHIP_RTL8370B ) - { - /*set GPIO8, GPIO9, OpenDrain as I2C, clock = 252KHZ */ - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_SYS_CTL, 0x5c3f)) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_FAILED; - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_i2c_mode_set - * Description: - * Set I2C data byte-order. - * Input: - * i2cmode - byte-order mode - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * This API can set I2c traffic's byte-order . - */ -rtk_api_ret_t rtk_i2c_mode_set( rtk_I2C_16bit_mode_t i2cmode ) -{ - if(i2cmode >= I2C_Mode_END) - { - return RT_ERR_INPUT; - } - else if(i2cmode == I2C_70B_LSB_16BIT_MODE) - { - rtk_i2c_mode = I2C_70B_LSB_16BIT_MODE; - - return RT_ERR_OK; - } - else if( i2cmode == I2C_LSB_16BIT_MODE) - { - rtk_i2c_mode = I2C_LSB_16BIT_MODE; - return RT_ERR_OK; - } - else - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_i2c_mode_get - * Description: - * Get i2c traffic byte-order setting. - * Input: - * None - * Output: - * pI2cMode - i2c byte-order - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - input parameter is null pointer - * Note: - * The API can get i2c traffic byte-order setting. - */ -rtk_api_ret_t rtk_i2c_mode_get( rtk_I2C_16bit_mode_t * pI2cMode) -{ - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - if(NULL == pI2cMode) - return RT_ERR_NULL_POINTER; - if(rtk_i2c_mode == I2C_70B_LSB_16BIT_MODE) - *pI2cMode = 1; - else if ((rtk_i2c_mode == I2C_LSB_16BIT_MODE)) - *pI2cMode = 0; - else - return RT_ERR_FAILED; - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_i2c_gpioPinGroup_set - * Description: - * Set i2c SDA & SCL used GPIO pins group. - * Input: - * pins_group - GPIO pins group - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The API can set i2c used gpio pins group. - * There are three group pins could be used - */ -rtk_api_ret_t rtk_i2c_gpioPinGroup_set( rtk_I2C_gpio_pin_t pins_group ) -{ - rtk_uint32 retVal; - - - if( ( pins_group > I2C_GPIO_PIN_END )|| ( pins_group < I2C_GPIO_PIN_8_9) ) - return RT_ERR_INPUT; - - if( (retVal = rtl8367c_setAsicI2CGpioPinGroup(pins_group) ) != RT_ERR_OK ) - return retVal ; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_i2c_gpioPinGroup_get - * Description: - * Get i2c SDA & SCL used GPIO pins group. - * Input: - * None - * Output: - * pPins_group - GPIO pins group - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - input parameter is null pointer - * Note: - * The API can get i2c used gpio pins group. - * There are three group pins could be used - */ -rtk_api_ret_t rtk_i2c_gpioPinGroup_get( rtk_I2C_gpio_pin_t * pPins_group ) -{ - rtk_uint32 retVal; - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPins_group) - return RT_ERR_NULL_POINTER; - if( (retVal = rtl8367c_getAsicI2CGpioPinGroup(pPins_group) ) != RT_ERR_OK ) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_i2c_data_read - * Description: - * read i2c slave device register. - * Input: - * deviceAddr - access Slave device address - * slaveRegAddr - access Slave register address - * Output: - * pRegData - read data - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - input parameter is null pointer - * Note: - * The API can access i2c slave and read i2c slave device register. - */ -rtk_api_ret_t rtk_i2c_data_read(rtk_uint8 deviceAddr, rtk_uint32 slaveRegAddr, rtk_uint32 *pRegData) -{ - rtk_uint32 retVal, counter=0; - rtk_uint8 controlByte_W, controlByte_R; - rtk_uint8 slaveRegAddr_L, slaveRegAddr_H = 0x0, temp; - rtk_uint8 regData_L, regData_H; - - /* control byte :deviceAddress + W, deviceAddress + R */ - controlByte_W = (rtk_uint8)(deviceAddr << 1) ; - controlByte_R = (rtk_uint8)(controlByte_W | 0x1); - - slaveRegAddr_L = (rtk_uint8) (slaveRegAddr & 0x00FF) ; - slaveRegAddr_H = (rtk_uint8) (slaveRegAddr >>8) ; - - if( rtk_i2c_mode == I2C_70B_LSB_16BIT_MODE) - { - temp = slaveRegAddr_L ; - slaveRegAddr_L = slaveRegAddr_H; - slaveRegAddr_H = temp; - } - - - /*check bus state: idle*/ - for(counter = 3000; counter>0; counter--) - { - if ( (retVal = rtl8367c_setAsicI2C_checkBusIdle() ) == RT_ERR_OK) - break; - } - if( counter ==0 ) - return retVal; /*i2c is busy*/ - - /*tx Start cmd*/ - if( (retVal = rtl8367c_setAsicI2CStartCmd() ) != RT_ERR_OK ) - return retVal ; - - - /*tx control _W*/ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(controlByte_W))!= RT_ERR_OK ) - return retVal ; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - /* tx slave buffer address low 8 bits */ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(slaveRegAddr_L))!= RT_ERR_OK ) - return retVal ; - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - - /* tx slave buffer address high 8 bits */ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(slaveRegAddr_H))!= RT_ERR_OK ) - return retVal ; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /*tx Start cmd*/ - if( (retVal = rtl8367c_setAsicI2CStartCmd() ) != RT_ERR_OK ) - return retVal ; - - /*tx control _R*/ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(controlByte_R))!= RT_ERR_OK ) - return retVal ; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /* rx low 8bit data*/ - if( ( retVal = rtl8367c_setAsicI2CRxOneCharCmd( ®Data_L) ) != RT_ERR_OK ) - return retVal; - - - - /* tx ack to slave, keep receive */ - if( (retVal = rtl8367c_setAsicI2CTxAckCmd()) != RT_ERR_OK ) - return retVal; - - /* rx high 8bit data*/ - if( ( retVal = rtl8367c_setAsicI2CRxOneCharCmd( ®Data_H) ) != RT_ERR_OK ) - return retVal; - - - - /* tx Noack to slave, Stop receive */ - if( (retVal = rtl8367c_setAsicI2CTxNoAckCmd()) != RT_ERR_OK ) - return retVal; - - - /*tx Stop cmd */ - if( (retVal = rtl8367c_setAsicI2CStopCmd()) != RT_ERR_OK ) - return retVal; - - *pRegData = (regData_H << 8) | regData_L; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_i2c_data_write - * Description: - * write data to i2c slave device register - * Input: - * deviceAddr - access Slave device address - * slaveRegAddr - access Slave register address - * regData - data to set - * Output: - * None - * Return: - * RT_ERR_OK - OK - * Note: - * The API can access i2c slave and setting i2c slave device register. - */ -rtk_api_ret_t rtk_i2c_data_write(rtk_uint8 deviceAddr, rtk_uint32 slaveRegAddr, rtk_uint32 regData) -{ - rtk_uint32 retVal,counter; - rtk_uint8 controlByte_W; - rtk_uint8 slaveRegAddr_L, slaveRegAddr_H = 0x0, temp; - rtk_uint8 regData_L, regData_H; - - /* control byte :deviceAddress + W */ - controlByte_W = (rtk_uint8)(deviceAddr<< 1) ; - - slaveRegAddr_L = (rtk_uint8) (slaveRegAddr & 0x00FF) ; - slaveRegAddr_H = (rtk_uint8) (slaveRegAddr >>8) ; - - regData_H = (rtk_uint8) (regData>> 8); - regData_L = (rtk_uint8) (regData & 0x00FF); - - if( rtk_i2c_mode == I2C_70B_LSB_16BIT_MODE) - { - temp = slaveRegAddr_L ; - slaveRegAddr_L = slaveRegAddr_H; - slaveRegAddr_H = temp; - } - - - /*check bus state: idle*/ - for(counter = 3000; counter>0; counter--) - { - if ( (retVal = rtl8367c_setAsicI2C_checkBusIdle() ) == RT_ERR_OK) - break; - } - - if( counter ==0 ) - return retVal; /*i2c is busy*/ - - - /*tx Start cmd*/ - if( (retVal = rtl8367c_setAsicI2CStartCmd() ) != RT_ERR_OK ) - return retVal ; - - - /*tx control _W*/ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(controlByte_W))!= RT_ERR_OK ) - return retVal ; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /* tx slave buffer address low 8 bits */ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(slaveRegAddr_L))!= RT_ERR_OK ) - return retVal; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /* tx slave buffer address high 8 bits */ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(slaveRegAddr_H))!= RT_ERR_OK ) - return retVal; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /*tx Datavlue LSB*/ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(regData_L))!= RT_ERR_OK ) - return retVal; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /*tx Datavlue MSB*/ - if( (retVal = rtl8367c_setAsicI2CTxOneCharCmd(regData_H))!= RT_ERR_OK ) - return retVal; - - - /*check if RX ack from slave*/ - if( (retVal = rtl8367c_setAsicI2CcheckRxAck()) != RT_ERR_OK ) - return retVal; - - - /*tx Stop cmd */ - if( (retVal = rtl8367c_setAsicI2CStopCmd()) != RT_ERR_OK ) - return retVal; - - return RT_ERR_OK; -} - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/igmp.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/igmp.c deleted file mode 100644 index 170cbdaaf0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/igmp.c +++ /dev/null @@ -1,1555 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in IGMP module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include - - -/* Function Name: - * rtk_igmp_init - * Description: - * This API enables H/W IGMP and set a default initial configuration. - * Input: - * None. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API enables H/W IGMP and set a default initial configuration. - */ -rtk_api_ret_t rtk_igmp_init(void) -{ - rtk_api_ret_t retVal; - rtk_port_t port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_setAsicLutIpMulticastLookup(ENABLED))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutIpLookupMethod(1))!=RT_ERR_OK) - return retVal; - - RTK_SCAN_ALL_PHY_PORTMASK(port) - { - if ((retVal = rtl8367c_setAsicIGMPv1Opeartion(port, PROTOCOL_OP_ASIC))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPv2Opeartion(port, PROTOCOL_OP_ASIC))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPv3Opeartion(port, PROTOCOL_OP_FLOOD))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicMLDv1Opeartion(port, PROTOCOL_OP_ASIC))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicMLDv2Opeartion(port, PROTOCOL_OP_FLOOD))!=RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicIGMPAllowDynamicRouterPort(rtk_switch_phyPortMask_get()))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPFastLeaveEn(ENABLED))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPReportLeaveFlood(1))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIgmp(ENABLED))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_state_set - * Description: - * This API set H/W IGMP state. - * Input: - * enabled - H/W IGMP state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set H/W IGMP state. - */ -rtk_api_ret_t rtk_igmp_state_set(rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enabled >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIgmp(enabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_state_get - * Description: - * This API get H/W IGMP state. - * Input: - * None. - * Output: - * pEnabled - H/W IGMP state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current H/W IGMP state. - */ -rtk_api_ret_t rtk_igmp_state_get(rtk_enable_t *pEnabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pEnabled == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIgmp(pEnabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_static_router_port_set - * Description: - * Configure static router port - * Input: - * pPortmask - Static Port mask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API set static router port - */ -rtk_api_ret_t rtk_igmp_static_router_port_set(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Valid port mask */ - if(pPortmask == NULL) - return RT_ERR_NULL_POINTER; - - RTK_CHK_PORTMASK_VALID(pPortmask); - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPStaticRouterPort(pmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_static_router_port_get - * Description: - * Get static router port - * Input: - * None. - * Output: - * pPortmask - Static port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API get static router port - */ -rtk_api_ret_t rtk_igmp_static_router_port_get(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pPortmask == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPStaticRouterPort(&pmask))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_protocol_set - * Description: - * set IGMP/MLD protocol action - * Input: - * port - Port ID - * protocol - IGMP/MLD protocol - * action - Per-port and per-protocol IGMP action seeting - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API set IGMP/MLD protocol action - */ -rtk_api_ret_t rtk_igmp_protocol_set(rtk_port_t port, rtk_igmp_protocol_t protocol, rtk_igmp_action_t action) -{ - rtk_uint32 operation; - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(protocol >= PROTOCOL_END) - return RT_ERR_INPUT; - - if(action >= IGMP_ACTION_END) - return RT_ERR_INPUT; - - switch(action) - { - case IGMP_ACTION_FORWARD: - operation = PROTOCOL_OP_FLOOD; - break; - case IGMP_ACTION_TRAP2CPU: - operation = PROTOCOL_OP_TRAP; - break; - case IGMP_ACTION_DROP: - operation = PROTOCOL_OP_DROP; - break; - case IGMP_ACTION_ASIC: - operation = PROTOCOL_OP_ASIC; - break; - default: - return RT_ERR_INPUT; - } - - switch(protocol) - { - case PROTOCOL_IGMPv1: - if ((retVal = rtl8367c_setAsicIGMPv1Opeartion(rtk_switch_port_L2P_get(port), operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_IGMPv2: - if ((retVal = rtl8367c_setAsicIGMPv2Opeartion(rtk_switch_port_L2P_get(port), operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_IGMPv3: - if ((retVal = rtl8367c_setAsicIGMPv3Opeartion(rtk_switch_port_L2P_get(port), operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_MLDv1: - if ((retVal = rtl8367c_setAsicMLDv1Opeartion(rtk_switch_port_L2P_get(port), operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_MLDv2: - if ((retVal = rtl8367c_setAsicMLDv2Opeartion(rtk_switch_port_L2P_get(port), operation))!=RT_ERR_OK) - return retVal; - - break; - default: - return RT_ERR_INPUT; - - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_protocol_get - * Description: - * set IGMP/MLD protocol action - * Input: - * port - Port ID - * protocol - IGMP/MLD protocol - * action - Per-port and per-protocol IGMP action seeting - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API set IGMP/MLD protocol action - */ -rtk_api_ret_t rtk_igmp_protocol_get(rtk_port_t port, rtk_igmp_protocol_t protocol, rtk_igmp_action_t *pAction) -{ - rtk_uint32 operation; - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(protocol >= PROTOCOL_END) - return RT_ERR_INPUT; - - if(pAction == NULL) - return RT_ERR_NULL_POINTER; - - switch(protocol) - { - case PROTOCOL_IGMPv1: - if ((retVal = rtl8367c_getAsicIGMPv1Opeartion(rtk_switch_port_L2P_get(port), &operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_IGMPv2: - if ((retVal = rtl8367c_getAsicIGMPv2Opeartion(rtk_switch_port_L2P_get(port), &operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_IGMPv3: - if ((retVal = rtl8367c_getAsicIGMPv3Opeartion(rtk_switch_port_L2P_get(port), &operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_MLDv1: - if ((retVal = rtl8367c_getAsicMLDv1Opeartion(rtk_switch_port_L2P_get(port), &operation))!=RT_ERR_OK) - return retVal; - - break; - case PROTOCOL_MLDv2: - if ((retVal = rtl8367c_getAsicMLDv2Opeartion(rtk_switch_port_L2P_get(port), &operation))!=RT_ERR_OK) - return retVal; - - break; - default: - return RT_ERR_INPUT; - - } - - switch(operation) - { - case PROTOCOL_OP_FLOOD: - *pAction = IGMP_ACTION_FORWARD; - break; - case PROTOCOL_OP_TRAP: - *pAction = IGMP_ACTION_TRAP2CPU; - break; - case PROTOCOL_OP_DROP: - *pAction = IGMP_ACTION_DROP; - break; - case PROTOCOL_OP_ASIC: - *pAction = IGMP_ACTION_ASIC; - break; - default: - return RT_ERR_FAILED; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_fastLeave_set - * Description: - * set IGMP/MLD FastLeave state - * Input: - * state - ENABLED: Enable FastLeave, DISABLED: disable FastLeave - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API set IGMP/MLD FastLeave state - */ -rtk_api_ret_t rtk_igmp_fastLeave_set(rtk_enable_t state) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(state >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPFastLeaveEn((rtk_uint32)state))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_fastLeave_get - * Description: - * get IGMP/MLD FastLeave state - * Input: - * None - * Output: - * pState - ENABLED: Enable FastLeave, DISABLED: disable FastLeave - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - NULL pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API get IGMP/MLD FastLeave state - */ -rtk_api_ret_t rtk_igmp_fastLeave_get(rtk_enable_t *pState) -{ - rtk_uint32 fast_leave; - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pState == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPFastLeaveEn(&fast_leave))!=RT_ERR_OK) - return retVal; - - *pState = ((fast_leave == 1) ? ENABLED : DISABLED); - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_maxGroup_set - * Description: - * Set per port multicast group learning limit. - * Input: - * port - Port ID - * group - The number of multicast group learning limit. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_PORT_ID - Error Port ID - * RT_ERR_OUT_OF_RANGE - parameter out of range - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API set per port multicast group learning limit. - */ -rtk_api_ret_t rtk_igmp_maxGroup_set(rtk_port_t port, rtk_uint32 group) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(group > RTL8367C_IGMP_MAX_GOUP) - return RT_ERR_OUT_OF_RANGE; - - if ((retVal = rtl8367c_setAsicIGMPPortMAXGroup(rtk_switch_port_L2P_get(port), group))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_maxGroup_get - * Description: - * Get per port multicast group learning limit. - * Input: - * port - Port ID - * Output: - * pGroup - The number of multicast group learning limit. - * Return: - * RT_ERR_OK - OK - * RT_ERR_PORT_ID - Error Port ID - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API get per port multicast group learning limit. - */ -rtk_api_ret_t rtk_igmp_maxGroup_get(rtk_port_t port, rtk_uint32 *pGroup) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(pGroup == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPPortMAXGroup(rtk_switch_port_L2P_get(port), pGroup))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_currentGroup_get - * Description: - * Get per port multicast group learning count. - * Input: - * port - Port ID - * Output: - * pGroup - The number of multicast group learning count. - * Return: - * RT_ERR_OK - OK - * RT_ERR_PORT_ID - Error Port ID - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API get per port multicast group learning count. - */ -rtk_api_ret_t rtk_igmp_currentGroup_get(rtk_port_t port, rtk_uint32 *pGroup) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(pGroup == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPPortCurrentGroup(rtk_switch_port_L2P_get(port), pGroup))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_tableFullAction_set - * Description: - * set IGMP/MLD Table Full Action - * Input: - * action - Table Full Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_tableFullAction_set(rtk_igmp_tableFullAction_t action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(action >= IGMP_TABLE_FULL_OP_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPTableFullOP((rtk_uint32)action))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_tableFullAction_get - * Description: - * get IGMP/MLD Table Full Action - * Input: - * None - * Output: - * pAction - Table Full Action - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_tableFullAction_get(rtk_igmp_tableFullAction_t *pAction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPTableFullOP((rtk_uint32 *)pAction))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_checksumErrorAction_set - * Description: - * set IGMP/MLD Checksum Error Action - * Input: - * action - Checksum error Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_checksumErrorAction_set(rtk_igmp_checksumErrorAction_t action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(action >= IGMP_CRC_ERR_OP_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPCRCErrOP((rtk_uint32)action))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_igmp_checksumErrorAction_get - * Description: - * get IGMP/MLD Checksum Error Action - * Input: - * None - * Output: - * pAction - Checksum error Action - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_checksumErrorAction_get(rtk_igmp_checksumErrorAction_t *pAction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPCRCErrOP((rtk_uint32 *)pAction))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_leaveTimer_set - * Description: - * set IGMP/MLD Leave timer - * Input: - * timer - Leave timer - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_leaveTimer_set(rtk_uint32 timer) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(timer > RTL8367C_MAX_LEAVE_TIMER) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPLeaveTimer(timer))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_leaveTimer_get - * Description: - * get IGMP/MLD Leave timer - * Input: - * None - * Output: - * pTimer - Leave Timer. - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_leaveTimer_get(rtk_uint32 *pTimer) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pTimer) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPLeaveTimer(pTimer))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_queryInterval_set - * Description: - * set IGMP/MLD Query Interval - * Input: - * interval - Query Interval - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_queryInterval_set(rtk_uint32 interval) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(interval > RTL8367C_MAX_QUERY_INT) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPQueryInterval(interval))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_queryInterval_get - * Description: - * get IGMP/MLD Query Interval - * Input: - * None. - * Output: - * pInterval - Query Interval - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_queryInterval_get(rtk_uint32 *pInterval) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pInterval) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPQueryInterval(pInterval))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_robustness_set - * Description: - * set IGMP/MLD Robustness value - * Input: - * robustness - Robustness value - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_robustness_set(rtk_uint32 robustness) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(robustness > RTL8367C_MAX_ROB_VAR) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPRobVar(robustness))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_robustness_get - * Description: - * get IGMP/MLD Robustness value - * Input: - * None - * Output: - * pRobustness - Robustness value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_igmp_robustness_get(rtk_uint32 *pRobustness) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pRobustness) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPRobVar(pRobustness))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_dynamicRouterRortAllow_set - * Description: - * Configure dynamic router port allow option - * Input: - * pPortmask - Dynamic Port allow mask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * - */ -rtk_api_ret_t rtk_igmp_dynamicRouterPortAllow_set(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - RTK_CHK_PORTMASK_VALID(pPortmask); - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPAllowDynamicRouterPort(pmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_dynamicRouterRortAllow_get - * Description: - * Get dynamic router port allow option - * Input: - * None. - * Output: - * pPortmask - Dynamic Port allow mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * - */ -rtk_api_ret_t rtk_igmp_dynamicRouterPortAllow_get(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPAllowDynamicRouterPort(&pmask))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_dynamicRouterPort_get - * Description: - * Get dynamic router port - * Input: - * None. - * Output: - * pDynamicRouterPort - Dynamic Router Port - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * - */ -rtk_api_ret_t rtk_igmp_dynamicRouterPort_get(rtk_igmp_dynamicRouterPort_t *pDynamicRouterPort) -{ - rtk_api_ret_t retVal; - rtk_uint32 port; - rtk_uint32 timer; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pDynamicRouterPort) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPdynamicRouterPort1(&port, &timer))!= RT_ERR_OK) - return retVal; - - if (port == RTL8367C_ROUTER_PORT_INVALID) - { - pDynamicRouterPort->dynamicRouterPort0Valid = DISABLED; - pDynamicRouterPort->dynamicRouterPort0 = 0; - pDynamicRouterPort->dynamicRouterPort0Timer = 0; - } - else - { - pDynamicRouterPort->dynamicRouterPort0Valid = ENABLED; - pDynamicRouterPort->dynamicRouterPort0 = rtk_switch_port_P2L_get(port); - pDynamicRouterPort->dynamicRouterPort0Timer = timer; - } - - if ((retVal = rtl8367c_getAsicIGMPdynamicRouterPort2(&port, &timer))!= RT_ERR_OK) - return retVal; - - if (port == RTL8367C_ROUTER_PORT_INVALID) - { - pDynamicRouterPort->dynamicRouterPort1Valid = DISABLED; - pDynamicRouterPort->dynamicRouterPort1 = 0; - pDynamicRouterPort->dynamicRouterPort1Timer = 0; - } - else - { - pDynamicRouterPort->dynamicRouterPort1Valid = ENABLED; - pDynamicRouterPort->dynamicRouterPort1 = rtk_switch_port_P2L_get(port); - pDynamicRouterPort->dynamicRouterPort1Timer = timer; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_suppressionEnable_set - * Description: - * Configure IGMPv1/v2 & MLDv1 Report/Leave/Done suppression - * Input: - * reportSuppression - Report suppression - * leaveSuppression - Leave suppression - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_igmp_suppressionEnable_set(rtk_enable_t reportSuppression, rtk_enable_t leaveSuppression) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(reportSuppression >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(leaveSuppression >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPSuppression((rtk_uint32)reportSuppression, (rtk_uint32)leaveSuppression))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_suppressionEnable_get - * Description: - * Get IGMPv1/v2 & MLDv1 Report/Leave/Done suppression - * Input: - * None - * Output: - * pReportSuppression - Report suppression - * pLeaveSuppression - Leave suppression - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_suppressionEnable_get(rtk_enable_t *pReportSuppression, rtk_enable_t *pLeaveSuppression) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pReportSuppression) - return RT_ERR_NULL_POINTER; - - if(NULL == pLeaveSuppression) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPSuppression((rtk_uint32 *)pReportSuppression, (rtk_uint32 *)pLeaveSuppression))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_portRxPktEnable_set - * Description: - * Configure IGMP/MLD RX Packet configuration - * Input: - * port - Port ID - * pRxCfg - RX Packet Configuration - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_portRxPktEnable_set(rtk_port_t port, rtk_igmp_rxPktEnable_t *pRxCfg) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pRxCfg) - return RT_ERR_NULL_POINTER; - - if(pRxCfg->rxQuery >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(pRxCfg->rxReport >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(pRxCfg->rxLeave >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(pRxCfg->rxMRP >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(pRxCfg->rxMcast >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPQueryRX(rtk_switch_port_L2P_get(port), (rtk_uint32)pRxCfg->rxQuery))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPReportRX(rtk_switch_port_L2P_get(port), (rtk_uint32)pRxCfg->rxReport))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPLeaveRX(rtk_switch_port_L2P_get(port), (rtk_uint32)pRxCfg->rxLeave))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPMRPRX(rtk_switch_port_L2P_get(port), (rtk_uint32)pRxCfg->rxMRP))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicIGMPMcDataRX(rtk_switch_port_L2P_get(port), (rtk_uint32)pRxCfg->rxMcast))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_portRxPktEnable_get - * Description: - * Get IGMP/MLD RX Packet configuration - * Input: - * port - Port ID - * pRxCfg - RX Packet Configuration - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_portRxPktEnable_get(rtk_port_t port, rtk_igmp_rxPktEnable_t *pRxCfg) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pRxCfg) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPQueryRX(rtk_switch_port_L2P_get(port), (rtk_uint32 *)&(pRxCfg->rxQuery)))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicIGMPReportRX(rtk_switch_port_L2P_get(port), (rtk_uint32 *)&(pRxCfg->rxReport)))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicIGMPLeaveRX(rtk_switch_port_L2P_get(port), (rtk_uint32 *)&(pRxCfg->rxLeave)))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicIGMPMRPRX(rtk_switch_port_L2P_get(port), (rtk_uint32 *)&(pRxCfg->rxMRP)))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicIGMPMcDataRX(rtk_switch_port_L2P_get(port), (rtk_uint32 *)&(pRxCfg->rxMcast)))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_groupInfo_get - * Description: - * Get IGMP/MLD Group database - * Input: - * indes - Index (0~255) - * Output: - * pGroup - Group database information. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_groupInfo_get(rtk_uint32 index, rtk_igmp_groupInfo_t *pGroup) -{ - rtk_api_ret_t retVal; - rtk_uint32 valid; - rtl8367c_igmpgroup grp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check index */ - if(index > RTL8367C_IGMP_MAX_GOUP) - return RT_ERR_INPUT; - - if(NULL == pGroup) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPGroup(index, &valid, &grp))!=RT_ERR_OK) - return retVal; - - memset(pGroup, 0x00, sizeof(rtk_igmp_groupInfo_t)); - pGroup->valid = valid; - pGroup->reportSuppFlag = grp.report_supp_flag; - - if(grp.p0_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(0)); - pGroup->timer[rtk_switch_port_P2L_get(0)] = grp.p0_timer; - } - - if(grp.p1_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(1)); - pGroup->timer[rtk_switch_port_P2L_get(1)] = grp.p1_timer; - } - - if(grp.p2_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(2)); - pGroup->timer[rtk_switch_port_P2L_get(2)] = grp.p2_timer; - } - - if(grp.p3_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(3)); - pGroup->timer[rtk_switch_port_P2L_get(3)] = grp.p3_timer; - } - - if(grp.p4_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(4)); - pGroup->timer[rtk_switch_port_P2L_get(4)] = grp.p4_timer; - } - - if(grp.p5_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(5)); - pGroup->timer[rtk_switch_port_P2L_get(5)] = grp.p5_timer; - } - - if(grp.p6_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(6)); - pGroup->timer[rtk_switch_port_P2L_get(6)] = grp.p6_timer; - } - - if(grp.p7_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(7)); - pGroup->timer[rtk_switch_port_P2L_get(7)] = grp.p7_timer; - } - - if(grp.p8_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(8)); - pGroup->timer[rtk_switch_port_P2L_get(8)] = grp.p8_timer; - } - - if(grp.p9_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(9)); - pGroup->timer[rtk_switch_port_P2L_get(9)] = grp.p9_timer; - } - - if(grp.p10_timer != 0) - { - RTK_PORTMASK_PORT_SET((pGroup->member), rtk_switch_port_P2L_get(10)); - pGroup->timer[rtk_switch_port_P2L_get(10)] = grp.p10_timer; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_ReportLeaveFwdAction_set - * Description: - * Set Report Leave packet forwarding action - * Input: - * action - Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_igmp_ReportLeaveFwdAction_set(rtk_igmp_ReportLeaveFwdAct_t action) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - switch(action) - { - case IGMP_REPORT_LEAVE_TO_ROUTER: - regData = 1; - break; - case IGMP_REPORT_LEAVE_TO_ALLPORT: - regData = 2; - break; - case IGMP_REPORT_LEAVE_TO_ROUTER_PORT_ADV: - regData = 3; - break; - default: - return RT_ERR_INPUT; - } - - if ((retVal = rtl8367c_setAsicIGMPReportLeaveFlood(regData))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_ReportLeaveFwdAction_get - * Description: - * Get Report Leave packet forwarding action - * Input: - * action - Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_ReportLeaveFwdAction_get(rtk_igmp_ReportLeaveFwdAct_t *pAction) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPReportLeaveFlood(®Data))!=RT_ERR_OK) - return retVal; - - switch(regData) - { - case 1: - *pAction = IGMP_REPORT_LEAVE_TO_ROUTER; - break; - case 2: - *pAction = IGMP_REPORT_LEAVE_TO_ALLPORT; - break; - case 3: - *pAction = IGMP_REPORT_LEAVE_TO_ROUTER_PORT_ADV; - break; - default: - return RT_ERR_FAILED; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_dropLeaveZeroEnable_set - * Description: - * Set the function of droppping Leave packet with group IP = 0.0.0.0 - * Input: - * enabled - Action 1: drop, 0:pass - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_igmp_dropLeaveZeroEnable_set(rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(enabled >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPDropLeaveZero(enabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_igmp_dropLeaveZeroEnable_get - * Description: - * Get the function of droppping Leave packet with group IP = 0.0.0.0 - * Input: - * None - * Output: - * pEnabled. - Action 1: drop, 0:pass - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_dropLeaveZeroEnable_get(rtk_enable_t *pEnabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPDropLeaveZero((rtk_uint32 *)pEnabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_igmp_bypassGroupRange_set - * Description: - * Set Bypass group - * Input: - * group - bypassed group - * enabled - enabled 1: Bypassed, 0: not bypass - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_igmp_bypassGroupRange_set(rtk_igmp_bypassGroup_t group, rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(group >= IGMP_BYPASS_GROUP_END) - return RT_ERR_INPUT; - - if(enabled >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicIGMPBypassGroup(group, enabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_igmp_bypassGroupRange_get - * Description: - * get Bypass group - * Input: - * group - bypassed group - * Output: - * pEnable - enabled 1: Bypassed, 0: not bypass - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * - */ -rtk_api_ret_t rtk_igmp_bypassGroupRange_get(rtk_igmp_bypassGroup_t group, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(group >= IGMP_BYPASS_GROUP_END) - return RT_ERR_INPUT; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicIGMPBypassGroup(group, pEnable))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/acl.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/acl.h deleted file mode 100644 index 6308da8d42..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/acl.h +++ /dev/null @@ -1,990 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes ACL module high-layer API defination - * - */ - -#ifndef __RTK_API_ACL_H__ -#define __RTK_API_ACL_H__ - -/* - * Data Type Declaration - */ -#define RTK_FILTER_RAW_FIELD_NUMBER 8 - -#define ACL_DEFAULT_ABILITY 0 -#define ACL_DEFAULT_UNMATCH_PERMIT 1 - -#define ACL_RULE_FREE 0 -#define ACL_RULE_INAVAILABLE 1 -#define ACL_RULE_CARETAG_MASK 0x1F -#define FILTER_POLICING_MAX 4 -#define FILTER_LOGGING_MAX 8 -#define FILTER_PATTERN_MAX 4 - -#define FILTER_ENACT_CVLAN_MASK 0x01 -#define FILTER_ENACT_SVLAN_MASK 0x02 -#define FILTER_ENACT_PRIORITY_MASK 0x04 -#define FILTER_ENACT_POLICING_MASK 0x08 -#define FILTER_ENACT_FWD_MASK 0x10 -#define FILTER_ENACT_INTGPIO_MASK 0x20 -#define FILTER_ENACT_INIT_MASK 0x3F - -typedef enum rtk_filter_act_cactext_e -{ - FILTER_ENACT_CACTEXT_VLANONLY=0, - FILTER_ENACT_CACTEXT_BOTHVLANTAG, - FILTER_ENACT_CACTEXT_TAGONLY, - FILTER_ENACT_CACTEXT_END, - - -}rtk_filter_act_cactext_t; - -typedef enum rtk_filter_act_ctagfmt_e -{ - FILTER_CTAGFMT_UNTAG=0, - FILTER_CTAGFMT_TAG, - FILTER_CTAGFMT_KEEP, - FILTER_CTAGFMT_KEEP1PRMK, - - -}rtk_filter_act_ctag_t; - - - - - -#define RTK_MAX_NUM_OF_FILTER_TYPE 5 -#define RTK_MAX_NUM_OF_FILTER_FIELD 8 - -#define RTK_DOT_1AS_TIMESTAMP_UNIT_IN_WORD_LENGTH 3UL -#define RTK_IPV6_ADDR_WORD_LENGTH 4UL - -#define FILTER_ENACT_CVLAN_TYPE(type) (type - FILTER_ENACT_CVLAN_INGRESS) -#define FILTER_ENACT_SVLAN_TYPE(type) (type - FILTER_ENACT_SVLAN_INGRESS) -#define FILTER_ENACT_FWD_TYPE(type) (type - FILTER_ENACT_ADD_DSTPORT) -#define FILTER_ENACT_PRI_TYPE(type) (type - FILTER_ENACT_PRIORITY) - -#define RTK_FILTER_FIELD_USED_MAX 8 -#define RTK_FILTER_FIELD_INDEX(template, index) ((template << 4) + index) - - -typedef enum rtk_filter_act_enable_e -{ - /* CVLAN */ - FILTER_ENACT_CVLAN_INGRESS = 0, - FILTER_ENACT_CVLAN_EGRESS, - FILTER_ENACT_CVLAN_SVID, - FILTER_ENACT_POLICING_1, - - /* SVLAN */ - FILTER_ENACT_SVLAN_INGRESS, - FILTER_ENACT_SVLAN_EGRESS, - FILTER_ENACT_SVLAN_CVID, - FILTER_ENACT_POLICING_2, - - /* Policing and Logging */ - FILTER_ENACT_POLICING_0, - - /* Forward */ - FILTER_ENACT_COPY_CPU, - FILTER_ENACT_DROP, - FILTER_ENACT_ADD_DSTPORT, - FILTER_ENACT_REDIRECT, - FILTER_ENACT_MIRROR, - FILTER_ENACT_TRAP_CPU, - FILTER_ENACT_ISOLATION, - - /* QoS */ - FILTER_ENACT_PRIORITY, - FILTER_ENACT_DSCP_REMARK, - FILTER_ENACT_1P_REMARK, - FILTER_ENACT_POLICING_3, - - /* Interrutp and GPO */ - FILTER_ENACT_INTERRUPT, - FILTER_ENACT_GPO, - - /*VLAN tag*/ - FILTER_ENACT_EGRESSCTAG_UNTAG, - FILTER_ENACT_EGRESSCTAG_TAG, - FILTER_ENACT_EGRESSCTAG_KEEP, - FILTER_ENACT_EGRESSCTAG_KEEPAND1PRMK, - - FILTER_ENACT_END, -} rtk_filter_act_enable_t; - - -typedef struct -{ - rtk_filter_act_enable_t actEnable[FILTER_ENACT_END]; - - /* CVLAN acton */ - rtk_uint32 filterCvlanVid; - rtk_uint32 filterCvlanIdx; - /* SVLAN action */ - rtk_uint32 filterSvlanVid; - rtk_uint32 filterSvlanIdx; - - /* Policing action */ - rtk_uint32 filterPolicingIdx[FILTER_POLICING_MAX]; - - /* Forwarding action */ - rtk_portmask_t filterPortmask; - - /* QOS action */ - rtk_uint32 filterPriority; - - /*GPO*/ - rtk_uint32 filterPin; - -} rtk_filter_action_t; - -typedef struct rtk_filter_flag_s -{ - rtk_uint32 value; - rtk_uint32 mask; -} rtk_filter_flag_t; - -typedef enum rtk_filter_care_tag_index_e -{ - CARE_TAG_CTAG = 0, - CARE_TAG_STAG, - CARE_TAG_PPPOE, - CARE_TAG_IPV4, - CARE_TAG_IPV6, - CARE_TAG_TCP, - CARE_TAG_UDP, - CARE_TAG_ARP, - CARE_TAG_RSV1, - CARE_TAG_RSV2, - CARE_TAG_ICMP, - CARE_TAG_IGMP, - CARE_TAG_LLC, - CARE_TAG_RSV3, - CARE_TAG_HTTP, - CARE_TAG_RSV4, - CARE_TAG_RSV5, - CARE_TAG_DHCP, - CARE_TAG_DHCPV6, - CARE_TAG_SNMP, - CARE_TAG_OAM, - CARE_TAG_END, -} rtk_filter_care_tag_index_t; - -typedef struct rtk_filter_care_tag_s -{ - rtk_filter_flag_t tagType[CARE_TAG_END]; -} rtk_filter_care_tag_t; - -typedef struct rtk_filter_field rtk_filter_field_t; - -typedef struct -{ - rtk_uint32 value[RTK_DOT_1AS_TIMESTAMP_UNIT_IN_WORD_LENGTH]; -} rtk_filter_dot1as_timestamp_t; - -typedef enum rtk_filter_field_data_type_e -{ - FILTER_FIELD_DATA_MASK = 0, - FILTER_FIELD_DATA_RANGE, - FILTER_FIELD_DATA_END , -} rtk_filter_field_data_type_t; - -typedef struct rtk_filter_ip_s -{ - rtk_uint32 dataType; - rtk_uint32 rangeStart; - rtk_uint32 rangeEnd; - rtk_uint32 value; - rtk_uint32 mask; -} rtk_filter_ip_t; - -typedef struct rtk_filter_mac_s -{ - rtk_uint32 dataType; - rtk_mac_t value; - rtk_mac_t mask; - rtk_mac_t rangeStart; - rtk_mac_t rangeEnd; -} rtk_filter_mac_t; - -typedef rtk_uint32 rtk_filter_op_t; - -typedef struct rtk_filter_value_s -{ - rtk_uint32 dataType; - rtk_uint32 value; - rtk_uint32 mask; - rtk_uint32 rangeStart; - rtk_uint32 rangeEnd; - -} rtk_filter_value_t; - -typedef struct rtk_filter_activeport_s -{ - rtk_portmask_t value; - rtk_portmask_t mask; - -} rtk_filter_activeport_t; - - - -typedef struct rtk_filter_tag_s -{ - rtk_filter_value_t pri; - rtk_filter_flag_t cfi; - rtk_filter_value_t vid; -} rtk_filter_tag_t; - -typedef struct rtk_filter_ipFlag_s -{ - rtk_filter_flag_t xf; - rtk_filter_flag_t mf; - rtk_filter_flag_t df; -} rtk_filter_ipFlag_t; - -typedef struct -{ - rtk_uint32 addr[RTK_IPV6_ADDR_WORD_LENGTH]; -} rtk_filter_ip6_addr_t; - -typedef struct -{ - rtk_uint32 dataType; - rtk_filter_ip6_addr_t value; - rtk_filter_ip6_addr_t mask; - rtk_filter_ip6_addr_t rangeStart; - rtk_filter_ip6_addr_t rangeEnd; -} rtk_filter_ip6_t; - -typedef rtk_uint32 rtk_filter_number_t; - -typedef struct rtk_filter_pattern_s -{ - rtk_uint32 value[FILTER_PATTERN_MAX]; - rtk_uint32 mask[FILTER_PATTERN_MAX]; -} rtk_filter_pattern_t; - -typedef struct rtk_filter_tcpFlag_s -{ - rtk_filter_flag_t urg; - rtk_filter_flag_t ack; - rtk_filter_flag_t psh; - rtk_filter_flag_t rst; - rtk_filter_flag_t syn; - rtk_filter_flag_t fin; - rtk_filter_flag_t ns; - rtk_filter_flag_t cwr; - rtk_filter_flag_t ece; -} rtk_filter_tcpFlag_t; - -typedef rtk_uint32 rtk_filter_field_raw_t; - -typedef enum rtk_filter_field_temple_input_e -{ - FILTER_FIELD_TEMPLE_INPUT_TYPE = 0, - FILTER_FIELD_TEMPLE_INPUT_INDEX, - FILTER_FIELD_TEMPLE_INPUT_MAX , -} rtk_filter_field_temple_input_t; - -struct rtk_filter_field -{ - rtk_uint32 fieldType; - - union - { - /* L2 struct */ - rtk_filter_mac_t dmac; - rtk_filter_mac_t smac; - rtk_filter_value_t etherType; - rtk_filter_tag_t ctag; - rtk_filter_tag_t relayCtag; - rtk_filter_tag_t stag; - rtk_filter_tag_t l2tag; - rtk_filter_dot1as_timestamp_t dot1asTimeStamp; - rtk_filter_mac_t mac; - - /* L3 struct */ - rtk_filter_ip_t sip; - rtk_filter_ip_t dip; - rtk_filter_ip_t ip; - rtk_filter_value_t protocol; - rtk_filter_value_t ipTos; - rtk_filter_ipFlag_t ipFlag; - rtk_filter_value_t ipOffset; - rtk_filter_ip6_t sipv6; - rtk_filter_ip6_t dipv6; - rtk_filter_ip6_t ipv6; - rtk_filter_value_t ipv6TrafficClass; - rtk_filter_value_t ipv6NextHeader; - rtk_filter_value_t flowLabel; - - /* L4 struct */ - rtk_filter_value_t tcpSrcPort; - rtk_filter_value_t tcpDstPort; - rtk_filter_tcpFlag_t tcpFlag; - rtk_filter_value_t tcpSeqNumber; - rtk_filter_value_t tcpAckNumber; - rtk_filter_value_t udpSrcPort; - rtk_filter_value_t udpDstPort; - rtk_filter_value_t icmpCode; - rtk_filter_value_t icmpType; - rtk_filter_value_t igmpType; - - /* pattern match */ - rtk_filter_pattern_t pattern; - - rtk_filter_value_t inData; - - } filter_pattern_union; - - rtk_uint32 fieldTemplateNo; - rtk_uint32 fieldTemplateIdx[RTK_FILTER_FIELD_USED_MAX]; - - struct rtk_filter_field *next; -}; - -typedef enum rtk_filter_field_type_e -{ - FILTER_FIELD_DMAC = 0, - FILTER_FIELD_SMAC, - FILTER_FIELD_ETHERTYPE, - FILTER_FIELD_CTAG, - FILTER_FIELD_STAG, - - FILTER_FIELD_IPV4_SIP, - FILTER_FIELD_IPV4_DIP, - FILTER_FIELD_IPV4_TOS, - FILTER_FIELD_IPV4_PROTOCOL, - FILTER_FIELD_IPV4_FLAG, - FILTER_FIELD_IPV4_OFFSET, - FILTER_FIELD_IPV6_SIPV6, - FILTER_FIELD_IPV6_DIPV6, - FILTER_FIELD_IPV6_TRAFFIC_CLASS, - FILTER_FIELD_IPV6_NEXT_HEADER, - - FILTER_FIELD_TCP_SPORT, - FILTER_FIELD_TCP_DPORT, - FILTER_FIELD_TCP_FLAG, - FILTER_FIELD_UDP_SPORT, - FILTER_FIELD_UDP_DPORT, - FILTER_FIELD_ICMP_CODE, - FILTER_FIELD_ICMP_TYPE, - FILTER_FIELD_IGMP_TYPE, - - FILTER_FIELD_VID_RANGE, - FILTER_FIELD_IP_RANGE, - FILTER_FIELD_PORT_RANGE, - - FILTER_FIELD_USER_DEFINED00, - FILTER_FIELD_USER_DEFINED01, - FILTER_FIELD_USER_DEFINED02, - FILTER_FIELD_USER_DEFINED03, - FILTER_FIELD_USER_DEFINED04, - FILTER_FIELD_USER_DEFINED05, - FILTER_FIELD_USER_DEFINED06, - FILTER_FIELD_USER_DEFINED07, - FILTER_FIELD_USER_DEFINED08, - FILTER_FIELD_USER_DEFINED09, - FILTER_FIELD_USER_DEFINED10, - FILTER_FIELD_USER_DEFINED11, - FILTER_FIELD_USER_DEFINED12, - FILTER_FIELD_USER_DEFINED13, - FILTER_FIELD_USER_DEFINED14, - FILTER_FIELD_USER_DEFINED15, - - FILTER_FIELD_PATTERN_MATCH, - - FILTER_FIELD_END, -} rtk_filter_field_type_t; - - -typedef enum rtk_filter_field_type_raw_e -{ - FILTER_FIELD_RAW_UNUSED = 0, - FILTER_FIELD_RAW_DMAC_15_0, - FILTER_FIELD_RAW_DMAC_31_16, - FILTER_FIELD_RAW_DMAC_47_32, - FILTER_FIELD_RAW_SMAC_15_0, - FILTER_FIELD_RAW_SMAC_31_16, - FILTER_FIELD_RAW_SMAC_47_32, - FILTER_FIELD_RAW_ETHERTYPE, - FILTER_FIELD_RAW_STAG, - FILTER_FIELD_RAW_CTAG, - - FILTER_FIELD_RAW_IPV4_SIP_15_0 = 0x10, - FILTER_FIELD_RAW_IPV4_SIP_31_16, - FILTER_FIELD_RAW_IPV4_DIP_15_0, - FILTER_FIELD_RAW_IPV4_DIP_31_16, - - - FILTER_FIELD_RAW_IPV6_SIP_15_0 = 0x20, - FILTER_FIELD_RAW_IPV6_SIP_31_16, - FILTER_FIELD_RAW_IPV6_DIP_15_0 = 0x28, - FILTER_FIELD_RAW_IPV6_DIP_31_16, - - FILTER_FIELD_RAW_VIDRANGE = 0x30, - FILTER_FIELD_RAW_IPRANGE, - FILTER_FIELD_RAW_PORTRANGE, - FILTER_FIELD_RAW_FIELD_VALID, - - FILTER_FIELD_RAW_FIELD_SELECT00 = 0x40, - FILTER_FIELD_RAW_FIELD_SELECT01, - FILTER_FIELD_RAW_FIELD_SELECT02, - FILTER_FIELD_RAW_FIELD_SELECT03, - FILTER_FIELD_RAW_FIELD_SELECT04, - FILTER_FIELD_RAW_FIELD_SELECT05, - FILTER_FIELD_RAW_FIELD_SELECT06, - FILTER_FIELD_RAW_FIELD_SELECT07, - FILTER_FIELD_RAW_FIELD_SELECT08, - FILTER_FIELD_RAW_FIELD_SELECT09, - FILTER_FIELD_RAW_FIELD_SELECT10, - FILTER_FIELD_RAW_FIELD_SELECT11, - FILTER_FIELD_RAW_FIELD_SELECT12, - FILTER_FIELD_RAW_FIELD_SELECT13, - FILTER_FIELD_RAW_FIELD_SELECT14, - FILTER_FIELD_RAW_FIELD_SELECT15, - - FILTER_FIELD_RAW_END, -} rtk_filter_field_type_raw_t; - -typedef enum rtk_filter_flag_care_type_e -{ - FILTER_FLAG_CARE_DONT_CARE = 0, - FILTER_FLAG_CARE_1, - FILTER_FLAG_CARE_0, - FILTER_FLAG_END -} rtk_filter_flag_care_type_t; - -typedef rtk_uint32 rtk_filter_id_t; /* filter id type */ - -typedef enum rtk_filter_invert_e -{ - FILTER_INVERT_DISABLE = 0, - FILTER_INVERT_ENABLE, - FILTER_INVERT_END, -} rtk_filter_invert_t; - -typedef rtk_uint32 rtk_filter_state_t; - -typedef rtk_uint32 rtk_filter_unmatch_action_t; - -typedef enum rtk_filter_unmatch_action_e -{ - FILTER_UNMATCH_DROP = 0, - FILTER_UNMATCH_PERMIT, - FILTER_UNMATCH_END, -} rtk_filter_unmatch_action_type_t; - -typedef struct -{ - rtk_filter_field_t *fieldHead; - rtk_filter_care_tag_t careTag; - rtk_filter_activeport_t activeport; - - rtk_filter_invert_t invert; -} rtk_filter_cfg_t; - -typedef struct -{ - rtk_filter_field_raw_t dataFieldRaw[RTK_FILTER_RAW_FIELD_NUMBER]; - rtk_filter_field_raw_t careFieldRaw[RTK_FILTER_RAW_FIELD_NUMBER]; - rtk_filter_field_type_raw_t fieldRawType[RTK_FILTER_RAW_FIELD_NUMBER]; - rtk_filter_care_tag_t careTag; - rtk_filter_activeport_t activeport; - - rtk_filter_invert_t invert; - rtk_enable_t valid; -} rtk_filter_cfg_raw_t; - -typedef struct -{ - rtk_uint32 index; - rtk_filter_field_type_raw_t fieldType[RTK_FILTER_RAW_FIELD_NUMBER]; -} rtk_filter_template_t; - -typedef enum rtk_field_sel_e -{ - FORMAT_DEFAULT = 0, - FORMAT_RAW, - FORMAT_LLC, - FORMAT_IPV4, - FORMAT_ARP, - FORMAT_IPV6, - FORMAT_IPPAYLOAD, - FORMAT_L4PAYLOAD, - FORMAT_END -}rtk_field_sel_t; - -typedef enum rtk_filter_iprange_e -{ - IPRANGE_UNUSED = 0, - IPRANGE_IPV4_SIP, - IPRANGE_IPV4_DIP, - IPRANGE_IPV6_SIP, - IPRANGE_IPV6_DIP, - IPRANGE_END -}rtk_filter_iprange_t; - -typedef enum rtk_filter_vidrange_e -{ - VIDRANGE_UNUSED = 0, - VIDRANGE_CVID, - VIDRANGE_SVID, - VIDRANGE_END -}rtk_filter_vidrange_t; - -typedef enum rtk_filter_portrange_e -{ - PORTRANGE_UNUSED = 0, - PORTRANGE_SPORT, - PORTRANGE_DPORT, - PORTRANGE_END -}rtk_filter_portrange_t; - -/* Function Name: - * rtk_filter_igrAcl_init - * Description: - * ACL initialization function - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_field or pFilter_cfg point to NULL. - * Note: - * This function enable and intialize ACL function - */ -extern rtk_api_ret_t rtk_filter_igrAcl_init(void); - -/* Function Name: - * rtk_filter_igrAcl_field_add - * Description: - * Add comparison rule to an ACL configuration - * Input: - * pFilter_cfg - The ACL configuration that this function will add comparison rule - * pFilter_field - The comparison rule that will be added. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_field or pFilter_cfg point to NULL. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function add a comparison rule (*pFilter_field) to an ACL configuration (*pFilter_cfg). - * Pointer pFilter_cfg points to an ACL configuration structure, this structure keeps multiple ACL - * comparison rules by means of linked list. Pointer pFilter_field will be added to linked - * list keeped by structure that pFilter_cfg points to. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_field_add(rtk_filter_cfg_t *pFilter_cfg, rtk_filter_field_t *pFilter_field); - -/* Function Name: - * rtk_filter_igrAcl_cfg_add - * Description: - * Add an ACL configuration to ASIC - * Input: - * filter_id - Start index of ACL configuration. - * pFilter_cfg - The ACL configuration that this function will add comparison rule - * pFilter_action - Action(s) of ACL configuration. - * Output: - * ruleNum - number of rules written in acl table - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_field or pFilter_cfg point to NULL. - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENTRY_INDEX - Invalid filter_id . - * RT_ERR_NULL_POINTER - Pointer pFilter_action or pFilter_cfg point to NULL. - * RT_ERR_FILTER_INACL_ACT_NOT_SUPPORT - Action is not supported in this chip. - * RT_ERR_FILTER_INACL_RULE_NOT_SUPPORT - Rule is not supported. - * Note: - * This function store pFilter_cfg, pFilter_action into ASIC. The starting - * index(es) is filter_id. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_cfg_add(rtk_filter_id_t filter_id, rtk_filter_cfg_t *pFilter_cfg, rtk_filter_action_t *pAction, rtk_filter_number_t *ruleNum); - -/* Function Name: - * rtk_filter_igrAcl_cfg_del - * Description: - * Delete an ACL configuration from ASIC - * Input: - * filter_id - Start index of ACL configuration. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_ENTRYIDX - Invalid filter_id. - * Note: - * This function delete a group of ACL rules starting from filter_id. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_cfg_del(rtk_filter_id_t filter_id); - -/* Function Name: - * rtk_filter_igrAcl_cfg_delAll - * Description: - * Delete all ACL entries from ASIC - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This function delete all ACL configuration from ASIC. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_cfg_delAll(void); - -/* Function Name: - * rtk_filter_igrAcl_cfg_get - * Description: - * Get one ingress acl configuration from ASIC. - * Input: - * filter_id - Start index of ACL configuration. - * Output: - * pFilter_cfg - buffer pointer of ingress acl data - * pFilter_action - buffer pointer of ingress acl action - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Pointer pFilter_action or pFilter_cfg point to NULL. - * RT_ERR_FILTER_ENTRYIDX - Invalid entry index. - * Note: - * This function delete all ACL configuration from ASIC. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_cfg_get(rtk_filter_id_t filter_id, rtk_filter_cfg_raw_t *pFilter_cfg, rtk_filter_action_t *pAction); - -/* Function Name: - * rtk_filter_igrAcl_unmatchAction_set - * Description: - * Set action to packets when no ACL configuration match - * Input: - * port - Port id. - * action - Action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function sets action of packets when no ACL configruation matches. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_unmatchAction_set(rtk_port_t port, rtk_filter_unmatch_action_t action); - -/* Function Name: - * rtk_filter_igrAcl_unmatchAction_get - * Description: - * Get action to packets when no ACL configuration match - * Input: - * port - Port id. - * Output: - * pAction - Action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function gets action of packets when no ACL configruation matches. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_unmatchAction_get(rtk_port_t port, rtk_filter_unmatch_action_t* action); - -/* Function Name: - * rtk_filter_igrAcl_state_set - * Description: - * Set state of ingress ACL. - * Input: - * port - Port id. - * state - Ingress ACL state. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function gets action of packets when no ACL configruation matches. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_state_set(rtk_port_t port, rtk_filter_state_t state); - -/* Function Name: - * rtk_filter_igrAcl_state_get - * Description: - * Get state of ingress ACL. - * Input: - * port - Port id. - * Output: - * pState - Ingress ACL state. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port id. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function gets action of packets when no ACL configruation matches. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_state_get(rtk_port_t port, rtk_filter_state_t* state); - -/* Function Name: - * rtk_filter_igrAcl_template_set - * Description: - * Set template of ingress ACL. - * Input: - * template - Ingress ACL template - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This function set ACL template. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_template_set(rtk_filter_template_t *aclTemplate); - -/* Function Name: - * rtk_filter_igrAcl_template_get - * Description: - * Get template of ingress ACL. - * Input: - * template - Ingress ACL template - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This function gets template of ACL. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_template_get(rtk_filter_template_t *aclTemplate); - -/* Function Name: - * rtk_filter_igrAcl_field_sel_set - * Description: - * Set user defined field selectors in HSB - * Input: - * index - index of field selector 0-15 - * format - Format of field selector - * offset - Retrieving data offset - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * System support 16 user defined field selctors. - * Each selector can be enabled or disable. - * User can defined retrieving 16-bits in many predefiend - * standard l2/l3/l4 payload. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_field_sel_set(rtk_uint32 index, rtk_field_sel_t format, rtk_uint32 offset); - -/* Function Name: - * rtk_filter_igrAcl_field_sel_get - * Description: - * Get user defined field selectors in HSB - * Input: - * index - index of field selector 0-15 - * Output: - * pFormat - Format of field selector - * pOffset - Retrieving data offset - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -extern rtk_api_ret_t rtk_filter_igrAcl_field_sel_get(rtk_uint32 index, rtk_field_sel_t *pFormat, rtk_uint32 *pOffset); - -/* Function Name: - * rtk_filter_iprange_set - * Description: - * Set IP Range check - * Input: - * index - index of IP Range 0-15 - * type - IP Range check type, 0:Delete a entry, 1: IPv4_SIP, 2: IPv4_DIP, 3:IPv6_SIP, 4:IPv6_DIP - * upperIp - The upper bound of IP range - * lowerIp - The lower Bound of IP range - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * upperIp must be larger or equal than lowerIp. - */ -extern rtk_api_ret_t rtk_filter_iprange_set(rtk_uint32 index, rtk_filter_iprange_t type, ipaddr_t upperIp, ipaddr_t lowerIp); - -/* Function Name: - * rtk_filter_iprange_get - * Description: - * Set IP Range check - * Input: - * index - index of IP Range 0-15 - * Output: - * pType - IP Range check type, 0:Delete a entry, 1: IPv4_SIP, 2: IPv4_DIP, 3:IPv6_SIP, 4:IPv6_DIP - * pUpperIp - The upper bound of IP range - * pLowerIp - The lower Bound of IP range - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * Note: - * upperIp must be larger or equal than lowerIp. - */ -extern rtk_api_ret_t rtk_filter_iprange_get(rtk_uint32 index, rtk_filter_iprange_t *pType, ipaddr_t *pUpperIp, ipaddr_t *pLowerIp); - -/* Function Name: - * rtk_filter_vidrange_set - * Description: - * Set VID Range check - * Input: - * index - index of VID Range 0-15 - * type - IP Range check type, 0:Delete a entry, 1: CVID, 2: SVID - * upperVid - The upper bound of VID range - * lowerVid - The lower Bound of VID range - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * upperVid must be larger or equal than lowerVid. - */ -extern rtk_api_ret_t rtk_filter_vidrange_set(rtk_uint32 index, rtk_filter_vidrange_t type, rtk_uint32 upperVid, rtk_uint32 lowerVid); - -/* Function Name: - * rtk_filter_vidrange_get - * Description: - * Get VID Range check - * Input: - * index - index of VID Range 0-15 - * Output: - * pType - IP Range check type, 0:Unused, 1: CVID, 2: SVID - * pUpperVid - The upper bound of VID range - * pLowerVid - The lower Bound of VID range - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * Note: - * None. - */ -extern rtk_api_ret_t rtk_filter_vidrange_get(rtk_uint32 index, rtk_filter_vidrange_t *pType, rtk_uint32 *pUpperVid, rtk_uint32 *pLowerVid); - -/* Function Name: - * rtk_filter_portrange_set - * Description: - * Set Port Range check - * Input: - * index - index of Port Range 0-15 - * type - IP Range check type, 0:Delete a entry, 1: Source Port, 2: Destnation Port - * upperPort - The upper bound of Port range - * lowerPort - The lower Bound of Port range - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * upperPort must be larger or equal than lowerPort. - */ -extern rtk_api_ret_t rtk_filter_portrange_set(rtk_uint32 index, rtk_filter_portrange_t type, rtk_uint32 upperPort, rtk_uint32 lowerPort); - -/* Function Name: - * rtk_filter_portrange_get - * Description: - * Set Port Range check - * Input: - * index - index of Port Range 0-15 - * Output: - * pType - IP Range check type, 0:Delete a entry, 1: Source Port, 2: Destnation Port - * pUpperPort - The upper bound of Port range - * pLowerPort - The lower Bound of Port range - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - The parameter is out of range - * RT_ERR_INPUT - Input error - * Note: - * None. - */ -extern rtk_api_ret_t rtk_filter_portrange_get(rtk_uint32 index, rtk_filter_portrange_t *pType, rtk_uint32 *pUpperPort, rtk_uint32 *pLowerPort); - -/* Function Name: - * rtk_filter_igrAclPolarity_set - * Description: - * Set ACL Goip control palarity - * Input: - * polarity - 1: High, 0: Low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * none - */ -extern rtk_api_ret_t rtk_filter_igrAclPolarity_set(rtk_uint32 polarity); - -/* Function Name: - * rtk_filter_igrAclPolarity_get - * Description: - * Get ACL Goip control palarity - * Input: - * pPolarity - 1: High, 0: Low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * none - */ -extern rtk_api_ret_t rtk_filter_igrAclPolarity_get(rtk_uint32* pPolarity); - - -#endif /* __RTK_API_ACL_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/cpu.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/cpu.h deleted file mode 100644 index 5544aca7b2..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/cpu.h +++ /dev/null @@ -1,327 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes CPU module high-layer API defination - * - */ - -#ifndef __RTK_API_CPU_H__ -#define __RTK_API_CPU_H__ - - -/* - * Data Type Declaration - */ -typedef enum rtk_cpu_insert_e -{ - CPU_INSERT_TO_ALL = 0, - CPU_INSERT_TO_TRAPPING, - CPU_INSERT_TO_NONE, - CPU_INSERT_END -}rtk_cpu_insert_t; - -typedef enum rtk_cpu_position_e -{ - CPU_POS_AFTER_SA = 0, - CPU_POS_BEFORE_CRC, - CPU_POS_END -}rtk_cpu_position_t; - -typedef enum rtk_cpu_tag_length_e -{ - CPU_LEN_8BYTES = 0, - CPU_LEN_4BYTES, - CPU_LEN_END -}rtk_cpu_tag_length_t; - - -typedef enum rtk_cpu_rx_length_e -{ - CPU_RX_72BYTES = 0, - CPU_RX_64BYTES, - CPU_RX_END -}rtk_cpu_rx_length_t; - - -/* Function Name: - * rtk_cpu_enable_set - * Description: - * Set CPU port function enable/disable. - * Input: - * enable - CPU port function enable - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can set CPU port function enable/disable. - */ -extern rtk_api_ret_t rtk_cpu_enable_set(rtk_enable_t enable); - -/* Function Name: - * rtk_cpu_enable_get - * Description: - * Get CPU port and its setting. - * Input: - * None - * Output: - * pEnable - CPU port function enable - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_L2_NO_CPU_PORT - CPU port is not exist - * Note: - * The API can get CPU port function enable/disable. - */ -extern rtk_api_ret_t rtk_cpu_enable_get(rtk_enable_t *pEnable); - -/* Function Name: - * rtk_cpu_tagPort_set - * Description: - * Set CPU port and CPU tag insert mode. - * Input: - * port - Port id. - * mode - CPU tag insert for packets egress from CPU port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can set CPU port and inserting proprietary CPU tag mode (Length/Type 0x8899) - * to the frame that transmitting to CPU port. - * The inset cpu tag mode is as following: - * - CPU_INSERT_TO_ALL - * - CPU_INSERT_TO_TRAPPING - * - CPU_INSERT_TO_NONE - */ -extern rtk_api_ret_t rtk_cpu_tagPort_set(rtk_port_t port, rtk_cpu_insert_t mode); - -/* Function Name: - * rtk_cpu_tagPort_get - * Description: - * Get CPU port and CPU tag insert mode. - * Input: - * None - * Output: - * pPort - Port id. - * pMode - CPU tag insert for packets egress from CPU port, 0:all insert 1:Only for trapped packets 2:no insert. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_L2_NO_CPU_PORT - CPU port is not exist - * Note: - * The API can get configured CPU port and its setting. - * The inset cpu tag mode is as following: - * - CPU_INSERT_TO_ALL - * - CPU_INSERT_TO_TRAPPING - * - CPU_INSERT_TO_NONE - */ -extern rtk_api_ret_t rtk_cpu_tagPort_get(rtk_port_t *pPort, rtk_cpu_insert_t *pMode); - -/* Function Name: - * rtk_cpu_awarePort_set - * Description: - * Set CPU aware port mask. - * Input: - * portmask - Port mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * The API can set configured CPU aware port mask. - */ -extern rtk_api_ret_t rtk_cpu_awarePort_set(rtk_portmask_t *pPortmask); - - -/* Function Name: - * rtk_cpu_awarePort_get - * Description: - * Get CPU aware port mask. - * Input: - * None - * Output: - * pPortmask - Port mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can get configured CPU aware port mask. - */ -extern rtk_api_ret_t rtk_cpu_awarePort_get(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_cpu_tagPosition_set - * Description: - * Set CPU tag position. - * Input: - * position - CPU tag position. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can set CPU tag position. - */ -extern rtk_api_ret_t rtk_cpu_tagPosition_set(rtk_cpu_position_t position); - -/* Function Name: - * rtk_cpu_tagPosition_get - * Description: - * Get CPU tag position. - * Input: - * None - * Output: - * pPosition - CPU tag position. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can get CPU tag position. - */ -extern rtk_api_ret_t rtk_cpu_tagPosition_get(rtk_cpu_position_t *pPosition); - -/* Function Name: - * rtk_cpu_tagLength_set - * Description: - * Set CPU tag length. - * Input: - * length - CPU tag length. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can set CPU tag length. - */ -extern rtk_api_ret_t rtk_cpu_tagLength_set(rtk_cpu_tag_length_t length); - -/* Function Name: - * rtk_cpu_tagLength_get - * Description: - * Get CPU tag length. - * Input: - * None - * Output: - * pLength - CPU tag length. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can get CPU tag length. - */ -extern rtk_api_ret_t rtk_cpu_tagLength_get(rtk_cpu_tag_length_t *pLength); - -/* Function Name: - * rtk_cpu_acceptLength_set - * Description: - * Set CPU accept length. - * Input: - * length - CPU tag length. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can set CPU accept length. - */ -extern rtk_api_ret_t rtk_cpu_acceptLength_set(rtk_cpu_rx_length_t length); - -/* Function Name: - * rtk_cpu_acceptLength_get - * Description: - * Get CPU accept length. - * Input: - * None - * Output: - * pLength - CPU tag length. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input. - * Note: - * The API can get CPU accept length. - */ -extern rtk_api_ret_t rtk_cpu_acceptLength_get(rtk_cpu_rx_length_t *pLength); - -/* Function Name: - * rtk_cpu_priRemap_set - * Description: - * Configure CPU priorities mapping to internal absolute priority. - * Input: - * int_pri - internal priority value. - * new_pri - new internal priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of CPU tag assignment for internal asic priority, and it is used for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_cpu_priRemap_set(rtk_pri_t int_pri, rtk_pri_t new_pri); - -/* Function Name: - * rtk_cpu_priRemap_get - * Description: - * Configure CPU priorities mapping to internal absolute priority. - * Input: - * int_pri - internal priority value. - * Output: - * pNew_pri - new internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of CPU tag assignment for internal asic priority, and it is used for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_cpu_priRemap_get(rtk_pri_t int_pri, rtk_pri_t *pNew_pri); - - -#endif /* __RTK_API_CPU_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/dot1x.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/dot1x.h deleted file mode 100644 index ef0a05a04b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/dot1x.h +++ /dev/null @@ -1,470 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes 1X module high-layer API defination - * - */ - -#ifndef __RTK_API_DOT1X_H__ -#define __RTK_API_DOT1X_H__ - - -/* Type of port-based dot1x auth/unauth*/ -typedef enum rtk_dot1x_auth_status_e -{ - UNAUTH = 0, - AUTH, - AUTH_STATUS_END -} rtk_dot1x_auth_status_t; - -typedef enum rtk_dot1x_direction_e -{ - DIR_BOTH = 0, - DIR_IN, - DIRECTION_END -} rtk_dot1x_direction_t; - -/* unauth pkt action */ -typedef enum rtk_dot1x_unauth_action_e -{ - DOT1X_ACTION_DROP = 0, - DOT1X_ACTION_TRAP2CPU, - DOT1X_ACTION_GUESTVLAN, - DOT1X_ACTION_END -} rtk_dot1x_unauth_action_t; - -/* Function Name: - * rtk_dot1x_unauthPacketOper_set - * Description: - * Set 802.1x unauth action configuration. - * Input: - * port - Port id. - * unauth_action - 802.1X unauth action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * This API can set 802.1x unauth action configuration. - * The unauth action is as following: - * - DOT1X_ACTION_DROP - * - DOT1X_ACTION_TRAP2CPU - * - DOT1X_ACTION_GUESTVLAN - */ -extern rtk_api_ret_t rtk_dot1x_unauthPacketOper_set(rtk_port_t port, rtk_dot1x_unauth_action_t unauth_action); - -/* Function Name: - * rtk_dot1x_unauthPacketOper_get - * Description: - * Get 802.1x unauth action configuration. - * Input: - * port - Port id. - * Output: - * pUnauth_action - 802.1X unauth action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get 802.1x unauth action configuration. - * The unauth action is as following: - * - DOT1X_ACTION_DROP - * - DOT1X_ACTION_TRAP2CPU - * - DOT1X_ACTION_GUESTVLAN - */ -extern rtk_api_ret_t rtk_dot1x_unauthPacketOper_get(rtk_port_t port, rtk_dot1x_unauth_action_t *pUnauth_action); - -/* Function Name: - * rtk_dot1x_eapolFrame2CpuEnable_set - * Description: - * Set 802.1x EAPOL packet trap to CPU configuration - * Input: - * enable - The status of 802.1x EAPOL packet. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * To support 802.1x authentication functionality, EAPOL frame (ether type = 0x888E) has to - * be trapped to CPU. - * The status of EAPOL frame trap to CPU is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_dot1x_eapolFrame2CpuEnable_set(rtk_enable_t enable); - -/* Function Name: - * rtk_dot1x_eapolFrame2CpuEnable_get - * Description: - * Get 802.1x EAPOL packet trap to CPU configuration - * Input: - * None - * Output: - * pEnable - The status of 802.1x EAPOL packet. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * To support 802.1x authentication functionality, EAPOL frame (ether type = 0x888E) has to - * be trapped to CPU. - * The status of EAPOL frame trap to CPU is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_dot1x_eapolFrame2CpuEnable_get(rtk_enable_t *pEnable); - -/* Function Name: - * rtk_dot1x_portBasedEnable_set - * Description: - * Set 802.1x port-based enable configuration - * Input: - * port - Port id. - * enable - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_PORTBASEDPNEN - 802.1X port-based enable error - * Note: - * The API can update the port-based port enable register content. If a port is 802.1x - * port based network access control "enabled", it should be authenticated so packets - * from that port won't be dropped or trapped to CPU. - * The status of 802.1x port-based network access control is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_dot1x_portBasedEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_dot1x_portBasedEnable_get - * Description: - * Get 802.1x port-based enable configuration - * Input: - * port - Port id. - * Output: - * pEnable - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get the 802.1x port-based port status. - */ -extern rtk_api_ret_t rtk_dot1x_portBasedEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_dot1x_portBasedAuthStatus_set - * Description: - * Set 802.1x port-based auth. port configuration - * Input: - * port - Port id. - * port_auth - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_DOT1X_PORTBASEDAUTH - 802.1X port-based auth error - * Note: - * The authenticated status of 802.1x port-based network access control is as following: - * - UNAUTH - * - AUTH - */ -extern rtk_api_ret_t rtk_dot1x_portBasedAuthStatus_set(rtk_port_t port, rtk_dot1x_auth_status_t port_auth); - -/* Function Name: - * rtk_dot1x_portBasedAuthStatus_get - * Description: - * Get 802.1x port-based auth. port configuration - * Input: - * port - Port id. - * Output: - * pPort_auth - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1x port-based port auth.information. - */ -extern rtk_api_ret_t rtk_dot1x_portBasedAuthStatus_get(rtk_port_t port, rtk_dot1x_auth_status_t *pPort_auth); - -/* Function Name: - * rtk_dot1x_portBasedDirection_set - * Description: - * Set 802.1x port-based operational direction configuration - * Input: - * port - Port id. - * port_direction - Operation direction - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_DOT1X_PORTBASEDOPDIR - 802.1X port-based operation direction error - * Note: - * The operate controlled direction of 802.1x port-based network access control is as following: - * - BOTH - * - IN - */ -extern rtk_api_ret_t rtk_dot1x_portBasedDirection_set(rtk_port_t port, rtk_dot1x_direction_t port_direction); - -/* Function Name: - * rtk_dot1x_portBasedDirection_get - * Description: - * Get 802.1X port-based operational direction configuration - * Input: - * port - Port id. - * Output: - * pPort_direction - Operation direction - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1x port-based operational direction information. - */ -extern rtk_api_ret_t rtk_dot1x_portBasedDirection_get(rtk_port_t port, rtk_dot1x_direction_t *pPort_direction); - -/* Function Name: - * rtk_dot1x_macBasedEnable_set - * Description: - * Set 802.1x mac-based port enable configuration - * Input: - * port - Port id. - * enable - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_MACBASEDPNEN - 802.1X mac-based enable error - * Note: - * If a port is 802.1x MAC based network access control "enabled", the incoming packets should - * be authenticated so packets from that port won't be dropped or trapped to CPU. - * The status of 802.1x MAC-based network access control is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_dot1x_macBasedEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_dot1x_macBasedEnable_get - * Description: - * Get 802.1x mac-based port enable configuration - * Input: - * port - Port id. - * Output: - * pEnable - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * If a port is 802.1x MAC based network access control "enabled", the incoming packets should - * be authenticated so packets from that port wont be dropped or trapped to CPU. - * The status of 802.1x MAC-based network access control is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_dot1x_macBasedEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_dot1x_macBasedAuthMac_add - * Description: - * Add an authenticated MAC to ASIC - * Input: - * port - Port id. - * pAuth_mac - The authenticated MAC. - * fid - filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_MACBASEDPNEN - 802.1X mac-based enable error - * Note: - * The API can add a 802.1x authenticated MAC address to port. If the MAC does not exist in LUT, - * user can't add this MAC to auth status. - */ -extern rtk_api_ret_t rtk_dot1x_macBasedAuthMac_add(rtk_port_t port, rtk_mac_t *pAuth_mac, rtk_fid_t fid); - -/* Function Name: - * rtk_dot1x_macBasedAuthMac_del - * Description: - * Delete an authenticated MAC to ASIC - * Input: - * port - Port id. - * pAuth_mac - The authenticated MAC. - * fid - filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can delete a 802.1x authenticated MAC address to port. It only change the auth status of - * the MAC and won't delete it from LUT. - */ -extern rtk_api_ret_t rtk_dot1x_macBasedAuthMac_del(rtk_port_t port, rtk_mac_t *pAuth_mac, rtk_fid_t fid); - -/* Function Name: - * rtk_dot1x_macBasedDirection_set - * Description: - * Set 802.1x mac-based operational direction configuration - * Input: - * mac_direction - Operation direction - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_DOT1X_MACBASEDOPDIR - 802.1X mac-based operation direction error - * Note: - * The operate controlled direction of 802.1x mac-based network access control is as following: - * - BOTH - * - IN - */ -extern rtk_api_ret_t rtk_dot1x_macBasedDirection_set(rtk_dot1x_direction_t mac_direction); - -/* Function Name: - * rtk_dot1x_macBasedDirection_get - * Description: - * Get 802.1x mac-based operational direction configuration - * Input: - * port - Port id. - * Output: - * pMac_direction - Operation direction - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x mac-based operational direction information. - */ -extern rtk_api_ret_t rtk_dot1x_macBasedDirection_get(rtk_dot1x_direction_t *pMac_direction); - -/* Function Name: - * Set 802.1x guest VLAN configuration - * Description: - * Set 802.1x mac-based operational direction configuration - * Input: - * vid - 802.1x guest VLAN ID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The operate controlled 802.1x guest VLAN - */ -extern rtk_api_ret_t rtk_dot1x_guestVlan_set(rtk_vlan_t vid); - -/* Function Name: - * rtk_dot1x_guestVlan_get - * Description: - * Get 802.1x guest VLAN configuration - * Input: - * None - * Output: - * pVid - 802.1x guest VLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x guest VLAN information. - */ -extern rtk_api_ret_t rtk_dot1x_guestVlan_get(rtk_vlan_t *pVid); - -/* Function Name: - * rtk_dot1x_guestVlan2Auth_set - * Description: - * Set 802.1x guest VLAN to auth host configuration - * Input: - * enable - The status of guest VLAN to auth host. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The operational direction of 802.1x guest VLAN to auth host control is as following: - * - ENABLED - * - DISABLED - */ -extern rtk_api_ret_t rtk_dot1x_guestVlan2Auth_set(rtk_enable_t enable); - -/* Function Name: - * rtk_dot1x_guestVlan2Auth_get - * Description: - * Get 802.1x guest VLAN to auth host configuration - * Input: - * None - * Output: - * pEnable - The status of guest VLAN to auth host. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x guest VLAN to auth host information. - */ -extern rtk_api_ret_t rtk_dot1x_guestVlan2Auth_get(rtk_enable_t *pEnable); - - -#endif /* __RTK_API_DOT1X_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/eee.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/eee.h deleted file mode 100644 index b670998c8c..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/eee.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes EEE module high-layer API defination - * - */ - -#ifndef __RTK_API_EEE_H__ -#define __RTK_API_EEE_H__ - -/* Function Name: - * rtk_eee_init - * Description: - * EEE function initialization. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is used to initialize EEE status. - */ -extern rtk_api_ret_t rtk_eee_init(void); - -/* Function Name: - * rtk_eee_portEnable_set - * Description: - * Set enable status of EEE function. - * Input: - * port - port id. - * enable - enable EEE status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set EEE function to the specific port. - * The configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_eee_portEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_eee_portEnable_get - * Description: - * Get port admin configuration of the specific port. - * Input: - * port - Port id. - * Output: - * pEnable - Back pressure status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can set EEE function to the specific port. - * The configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_eee_portEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - - -#endif /* __RTK_API_EEE_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/i2c.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/i2c.h deleted file mode 100644 index 2c7f0756ae..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/i2c.h +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes I2C module high-layer API defination - * - */ - - -#ifndef __RTK_API_I2C_H__ -#define __RTK_API_I2C_H__ -#include - -#define I2C_GPIO_MAX_GROUP (3) - -typedef enum rtk_I2C_16bit_mode_e{ - I2C_LSB_16BIT_MODE = 0, - I2C_70B_LSB_16BIT_MODE, - I2C_Mode_END -}rtk_I2C_16bit_mode_t; - - -typedef enum rtk_I2C_gpio_pin_e{ - I2C_GPIO_PIN_8_9 = 0, - I2C_GPIO_PIN_15_16 , - I2C_GPIO_PIN_35_36 , - I2C_GPIO_PIN_END -}rtk_I2C_gpio_pin_t; - - -/* Function Name: - * rtk_i2c_data_read - * Description: - * read i2c slave device register. - * Input: - * deviceAddr - access Slave device address - * slaveRegAddr - access Slave register address - * Output: - * pRegData - read data - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - input parameter is null pointer - * Note: - * The API can access i2c slave and read i2c slave device register. - */ -extern rtk_api_ret_t rtk_i2c_data_read(rtk_uint8 deviceAddr, rtk_uint32 slaveRegAddr, rtk_uint32 *pRegData); - -/* Function Name: - * rtk_i2c_data_write - * Description: - * write data to i2c slave device register - * Input: - * deviceAddr - access Slave device address - * slaveRegAddr - access Slave register address - * regData - data to set - * Output: - * None - * Return: - * RT_ERR_OK - OK - * Note: - * The API can access i2c slave and setting i2c slave device register. - */ -extern rtk_api_ret_t rtk_i2c_data_write(rtk_uint8 deviceAddr, rtk_uint32 slaveRegAddr, rtk_uint32 regData); - - -/* Function Name: - * rtk_i2c_init - * Description: - * I2C smart function initialization. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * Note: - * This API is used to initialize EEE status. - * need used GPIO pins - * OpenDrain and clock - */ -extern rtk_api_ret_t rtk_i2c_init(void); - -/* Function Name: - * rtk_i2c_mode_set - * Description: - * Set I2C data byte-order. - * Input: - * i2cmode - byte-order mode - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * This API can set I2c traffic's byte-order . - */ -extern rtk_api_ret_t rtk_i2c_mode_set( rtk_I2C_16bit_mode_t i2cmode); - -/* Function Name: - * rtk_i2c_mode_get - * Description: - * Get i2c traffic byte-order setting. - * Input: - * None - * Output: - * pI2cMode - i2c byte-order - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - input parameter is null pointer - * Note: - * The API can get i2c traffic byte-order setting. - */ -extern rtk_api_ret_t rtk_i2c_mode_get( rtk_I2C_16bit_mode_t * pI2cMode); - - -/* Function Name: - * rtk_i2c_gpioPinGroup_set - * Description: - * Set i2c SDA & SCL used GPIO pins group. - * Input: - * pins_group - GPIO pins group - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The API can set i2c used gpio pins group. - * There are three group pins could be used - */ -extern rtk_api_ret_t rtk_i2c_gpioPinGroup_set( rtk_I2C_gpio_pin_t pins_group); - -/* Function Name: - * rtk_i2c_gpioPinGroup_get - * Description: - * Get i2c SDA & SCL used GPIO pins group. - * Input: - * None - * Output: - * pPins_group - GPIO pins group - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - input parameter is null pointer - * Note: - * The API can get i2c used gpio pins group. - * There are three group pins could be used - */ -extern rtk_api_ret_t rtk_i2c_gpioPinGroup_get(rtk_I2C_gpio_pin_t * pPins_group); - - - - - - - -#endif - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/igmp.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/igmp.h deleted file mode 100644 index f088b0ccdd..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/igmp.h +++ /dev/null @@ -1,769 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes IGMP module high-layer API defination - * - */ - -#ifndef __RTK_API_IGMP_H__ -#define __RTK_API_IGMP_H__ - -/* - * Data Type Declaration - */ -typedef enum rtk_igmp_type_e -{ - IGMP_IPV4 = 0, - IGMP_PPPOE_IPV4, - IGMP_MLD, - IGMP_PPPOE_MLD, - IGMP_TYPE_END -} rtk_igmp_type_t; - -typedef enum rtk_trap_igmp_action_e -{ - IGMP_ACTION_FORWARD = 0, - IGMP_ACTION_TRAP2CPU, - IGMP_ACTION_DROP, - IGMP_ACTION_ASIC, - IGMP_ACTION_END -} rtk_igmp_action_t; - -typedef enum rtk_igmp_protocol_e -{ - PROTOCOL_IGMPv1 = 0, - PROTOCOL_IGMPv2, - PROTOCOL_IGMPv3, - PROTOCOL_MLDv1, - PROTOCOL_MLDv2, - PROTOCOL_END -} rtk_igmp_protocol_t; - -typedef enum rtk_igmp_tableFullAction_e -{ - IGMP_TABLE_FULL_FORWARD = 0, - IGMP_TABLE_FULL_DROP, - IGMP_TABLE_FULL_TRAP, - IGMP_TABLE_FULL_OP_END -}rtk_igmp_tableFullAction_t; - -typedef enum rtk_igmp_checksumErrorAction_e -{ - IGMP_CRC_ERR_DROP = 0, - IGMP_CRC_ERR_TRAP, - IGMP_CRC_ERR_FORWARD, - IGMP_CRC_ERR_OP_END -}rtk_igmp_checksumErrorAction_t; - -typedef enum rtk_igmp_bypassGroup_e -{ - IGMP_BYPASS_224_0_0_X = 0, - IGMP_BYPASS_224_0_1_X, - IGMP_BYPASS_239_255_255_X, - IGMP_BYPASS_IPV6_00XX, - IGMP_BYPASS_GROUP_END -}rtk_igmp_bypassGroup_t; - - -typedef struct rtk_igmp_dynamicRouterPort_s -{ - rtk_enable_t dynamicRouterPort0Valid; - rtk_port_t dynamicRouterPort0; - rtk_uint32 dynamicRouterPort0Timer; - rtk_enable_t dynamicRouterPort1Valid; - rtk_port_t dynamicRouterPort1; - rtk_uint32 dynamicRouterPort1Timer; - -}rtk_igmp_dynamicRouterPort_t; - -typedef struct rtk_igmp_rxPktEnable_s -{ - rtk_enable_t rxQuery; - rtk_enable_t rxReport; - rtk_enable_t rxLeave; - rtk_enable_t rxMRP; - rtk_enable_t rxMcast; -}rtk_igmp_rxPktEnable_t; - -typedef struct rtk_igmp_groupInfo_s -{ - rtk_enable_t valid; - rtk_portmask_t member; - rtk_uint32 timer[RTK_PORT_MAX]; - rtk_uint32 reportSuppFlag; -}rtk_igmp_groupInfo_t; - -typedef enum rtk_igmp_ReportLeaveFwdAct_e -{ - IGMP_REPORT_LEAVE_TO_ROUTER = 0, - IGMP_REPORT_LEAVE_TO_ALLPORT, - IGMP_REPORT_LEAVE_TO_ROUTER_PORT_ADV, - IGMP_REPORT_LEAVE_ACT_END -}rtk_igmp_ReportLeaveFwdAct_t; - -/* Function Name: - * rtk_igmp_init - * Description: - * This API enables H/W IGMP and set a default initial configuration. - * Input: - * None. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API enables H/W IGMP and set a default initial configuration. - */ -extern rtk_api_ret_t rtk_igmp_init(void); - -/* Function Name: - * rtk_igmp_state_set - * Description: - * This API set H/W IGMP state. - * Input: - * enabled - H/W IGMP state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set H/W IGMP state. - */ -extern rtk_api_ret_t rtk_igmp_state_set(rtk_enable_t enabled); - -/* Function Name: - * rtk_igmp_state_get - * Description: - * This API get H/W IGMP state. - * Input: - * None. - * Output: - * pEnabled - H/W IGMP state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current H/W IGMP state. - */ -extern rtk_api_ret_t rtk_igmp_state_get(rtk_enable_t *pEnabled); - -/* Function Name: - * rtk_igmp_static_router_port_set - * Description: - * Configure static router port - * Input: - * pPortmask - Static Port mask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API set static router port - */ -extern rtk_api_ret_t rtk_igmp_static_router_port_set(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_igmp_static_router_port_get - * Description: - * Get static router port - * Input: - * None. - * Output: - * pPortmask - Static port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API get static router port - */ -extern rtk_api_ret_t rtk_igmp_static_router_port_get(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_igmp_protocol_set - * Description: - * set IGMP/MLD protocol action - * Input: - * port - Port ID - * protocol - IGMP/MLD protocol - * action - Per-port and per-protocol IGMP action seeting - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API set IGMP/MLD protocol action - */ -extern rtk_api_ret_t rtk_igmp_protocol_set(rtk_port_t port, rtk_igmp_protocol_t protocol, rtk_igmp_action_t action); - -/* Function Name: - * rtk_igmp_protocol_get - * Description: - * set IGMP/MLD protocol action - * Input: - * port - Port ID - * protocol - IGMP/MLD protocol - * action - Per-port and per-protocol IGMP action seeting - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * This API set IGMP/MLD protocol action - */ -extern rtk_api_ret_t rtk_igmp_protocol_get(rtk_port_t port, rtk_igmp_protocol_t protocol, rtk_igmp_action_t *pAction); - -/* Function Name: - * rtk_igmp_fastLeave_set - * Description: - * set IGMP/MLD FastLeave state - * Input: - * state - ENABLED: Enable FastLeave, DISABLED: disable FastLeave - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API set IGMP/MLD FastLeave state - */ -extern rtk_api_ret_t rtk_igmp_fastLeave_set(rtk_enable_t state); - -/* Function Name: - * rtk_igmp_fastLeave_get - * Description: - * get IGMP/MLD FastLeave state - * Input: - * None - * Output: - * pState - ENABLED: Enable FastLeave, DISABLED: disable FastLeave - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - NULL pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API get IGMP/MLD FastLeave state - */ -extern rtk_api_ret_t rtk_igmp_fastLeave_get(rtk_enable_t *pState); - -/* Function Name: - * rtk_igmp_maxGroup_set - * Description: - * Set per port multicast group learning limit. - * Input: - * port - Port ID - * group - The number of multicast group learning limit. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_PORT_ID - Error Port ID - * RT_ERR_OUT_OF_RANGE - parameter out of range - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API set per port multicast group learning limit. - */ -extern rtk_api_ret_t rtk_igmp_maxGroup_set(rtk_port_t port, rtk_uint32 group); - -/* Function Name: - * rtk_igmp_maxGroup_get - * Description: - * Get per port multicast group learning limit. - * Input: - * port - Port ID - * Output: - * pGroup - The number of multicast group learning limit. - * Return: - * RT_ERR_OK - OK - * RT_ERR_PORT_ID - Error Port ID - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API get per port multicast group learning limit. - */ -extern rtk_api_ret_t rtk_igmp_maxGroup_get(rtk_port_t port, rtk_uint32 *pGroup); - -/* Function Name: - * rtk_igmp_currentGroup_get - * Description: - * Get per port multicast group learning count. - * Input: - * port - Port ID - * Output: - * pGroup - The number of multicast group learning count. - * Return: - * RT_ERR_OK - OK - * RT_ERR_PORT_ID - Error Port ID - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API get per port multicast group learning count. - */ -extern rtk_api_ret_t rtk_igmp_currentGroup_get(rtk_port_t port, rtk_uint32 *pGroup); - -/* Function Name: - * rtk_igmp_tableFullAction_set - * Description: - * set IGMP/MLD Table Full Action - * Input: - * action - Table Full Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_tableFullAction_set(rtk_igmp_tableFullAction_t action); - -/* Function Name: - * rtk_igmp_tableFullAction_get - * Description: - * get IGMP/MLD Table Full Action - * Input: - * None - * Output: - * pAction - Table Full Action - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_tableFullAction_get(rtk_igmp_tableFullAction_t *pAction); - -/* Function Name: - * rtk_igmp_checksumErrorAction_set - * Description: - * set IGMP/MLD Checksum Error Action - * Input: - * action - Checksum error Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_checksumErrorAction_set(rtk_igmp_checksumErrorAction_t action); - -/* Function Name: - * rtk_igmp_checksumErrorAction_get - * Description: - * get IGMP/MLD Checksum Error Action - * Input: - * None - * Output: - * pAction - Checksum error Action - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_checksumErrorAction_get(rtk_igmp_checksumErrorAction_t *pAction); - -/* Function Name: - * rtk_igmp_leaveTimer_set - * Description: - * set IGMP/MLD Leave timer - * Input: - * timer - Leave timer - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_leaveTimer_set(rtk_uint32 timer); - -/* Function Name: - * rtk_igmp_leaveTimer_get - * Description: - * get IGMP/MLD Leave timer - * Input: - * None - * Output: - * pTimer - Leave Timer. - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_leaveTimer_get(rtk_uint32 *pTimer); - -/* Function Name: - * rtk_igmp_queryInterval_set - * Description: - * set IGMP/MLD Query Interval - * Input: - * interval - Query Interval - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_queryInterval_set(rtk_uint32 interval); - -/* Function Name: - * rtk_igmp_queryInterval_get - * Description: - * get IGMP/MLD Query Interval - * Input: - * None. - * Output: - * pInterval - Query Interval - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_queryInterval_get(rtk_uint32 *pInterval); - -/* Function Name: - * rtk_igmp_robustness_set - * Description: - * set IGMP/MLD Robustness value - * Input: - * robustness - Robustness value - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Error Input - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_robustness_set(rtk_uint32 robustness); - -/* Function Name: - * rtk_igmp_robustness_get - * Description: - * get IGMP/MLD Robustness value - * Input: - * None - * Output: - * pRobustness - Robustness value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -extern rtk_api_ret_t rtk_igmp_robustness_get(rtk_uint32 *pRobustness); - -/* Function Name: - * rtk_igmp_dynamicRouterRortAllow_set - * Description: - * Configure dynamic router port allow option - * Input: - * pPortmask - Dynamic Port allow mask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_dynamicRouterPortAllow_set(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_igmp_dynamicRouterRortAllow_get - * Description: - * Get dynamic router port allow option - * Input: - * None. - * Output: - * pPortmask - Dynamic Port allow mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_dynamicRouterPortAllow_get(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_igmp_dynamicRouterPort_get - * Description: - * Get dynamic router port - * Input: - * None. - * Output: - * pDynamicRouterPort - Dynamic Router Port - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error parameter - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_dynamicRouterPort_get(rtk_igmp_dynamicRouterPort_t *pDynamicRouterPort); - -/* Function Name: - * rtk_igmp_suppressionEnable_set - * Description: - * Configure IGMPv1/v2 & MLDv1 Report/Leave/Done suppression - * Input: - * reportSuppression - Report suppression - * leaveSuppression - Leave suppression - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_suppressionEnable_set(rtk_enable_t reportSuppression, rtk_enable_t leaveSuppression); - -/* Function Name: - * rtk_igmp_suppressionEnable_get - * Description: - * Get IGMPv1/v2 & MLDv1 Report/Leave/Done suppression - * Input: - * None - * Output: - * pReportSuppression - Report suppression - * pLeaveSuppression - Leave suppression - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_suppressionEnable_get(rtk_enable_t *pReportSuppression, rtk_enable_t *pLeaveSuppression); - -/* Function Name: - * rtk_igmp_portRxPktEnable_set - * Description: - * Configure IGMP/MLD RX Packet configuration - * Input: - * port - Port ID - * pRxCfg - RX Packet Configuration - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_portRxPktEnable_set(rtk_port_t port, rtk_igmp_rxPktEnable_t *pRxCfg); - -/* Function Name: - * rtk_igmp_portRxPktEnable_get - * Description: - * Get IGMP/MLD RX Packet configuration - * Input: - * port - Port ID - * pRxCfg - RX Packet Configuration - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_portRxPktEnable_get(rtk_port_t port, rtk_igmp_rxPktEnable_t *pRxCfg); - -/* Function Name: - * rtk_igmp_groupInfo_get - * Description: - * Get IGMP/MLD Group database - * Input: - * indes - Index (0~255) - * Output: - * pGroup - Group database information. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_groupInfo_get(rtk_uint32 index, rtk_igmp_groupInfo_t *pGroup); - -/* Function Name: - * rtk_igmp_ReportLeaveFwdAction_set - * Description: - * Set Report Leave packet forwarding action - * Input: - * action - Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_ReportLeaveFwdAction_set(rtk_igmp_ReportLeaveFwdAct_t action); - -/* Function Name: - * rtk_igmp_ReportLeaveFwdAction_get - * Description: - * Get Report Leave packet forwarding action - * Input: - * action - Action - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_ReportLeaveFwdAction_get(rtk_igmp_ReportLeaveFwdAct_t *pAction); - -/* Function Name: - * rtk_igmp_dropLeaveZeroEnable_set - * Description: - * Set the function of droppping Leave packet with group IP = 0.0.0.0 - * Input: - * enabled - Action 1: drop, 0:pass - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_dropLeaveZeroEnable_set(rtk_enable_t enabled); - -/* Function Name: - * rtk_igmp_dropLeaveZeroEnable_get - * Description: - * Get the function of droppping Leave packet with group IP = 0.0.0.0 - * Input: - * None - * Output: - * pEnabled. - Action 1: drop, 0:pass - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_dropLeaveZeroEnable_get(rtk_enable_t *pEnabled); - -/* Function Name: - * rtk_igmp_bypassGroupRange_set - * Description: - * Set Bypass group - * Input: - * group - bypassed group - * enabled - enabled 1: Bypassed, 0: not bypass - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_bypassGroupRange_set(rtk_igmp_bypassGroup_t group, rtk_enable_t enabled); - -/* Function Name: - * rtk_igmp_bypassGroupRange_get - * Description: - * get Bypass group - * Input: - * group - bypassed group - * Output: - * pEnable - enabled 1: Bypassed, 0: not bypass - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_igmp_bypassGroupRange_get(rtk_igmp_bypassGroup_t group, rtk_enable_t *pEnable); - -#endif /* __RTK_API_IGMP_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h deleted file mode 100644 index f2689ebc70..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h +++ /dev/null @@ -1,254 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes Interrupt module high-layer API defination - * - */ - -#ifndef __RTK_API_INTERRUPT_H__ -#define __RTK_API_INTERRUPT_H__ - - -/* - * Data Type Declaration - */ -#define RTK_MAX_NUM_OF_INTERRUPT_TYPE 1 - - -typedef struct rtk_int_status_s -{ - rtk_uint16 value[RTK_MAX_NUM_OF_INTERRUPT_TYPE]; -} rtk_int_status_t; - -typedef struct rtk_int_info_s -{ - rtk_portmask_t portMask; - rtk_uint32 meterMask; - rtk_uint32 systemLearnOver; -}rtk_int_info_t; - -typedef enum rtk_int_type_e -{ - INT_TYPE_LINK_STATUS = 0, - INT_TYPE_METER_EXCEED, - INT_TYPE_LEARN_LIMIT, - INT_TYPE_LINK_SPEED, - INT_TYPE_CONGEST, - INT_TYPE_GREEN_FEATURE, - INT_TYPE_LOOP_DETECT, - INT_TYPE_8051, - INT_TYPE_CABLE_DIAG, - INT_TYPE_ACL, - INT_TYPE_RESERVED, /* Unused */ - INT_TYPE_SLIENT, - INT_TYPE_END -}rtk_int_type_t; - -typedef enum rtk_int_advType_e -{ - ADV_L2_LEARN_PORT_MASK = 0, - ADV_SPEED_CHANGE_PORT_MASK, - ADV_SPECIAL_CONGESTION_PORT_MASK, - ADV_PORT_LINKDOWN_PORT_MASK, - ADV_PORT_LINKUP_PORT_MASK, - ADV_METER_EXCEED_MASK, - ADV_RLDP_LOOPED, - ADV_RLDP_RELEASED, - ADV_END, -} rtk_int_advType_t; - -typedef enum rtk_int_polarity_e -{ - INT_POLAR_HIGH = 0, - INT_POLAR_LOW, - INT_POLAR_END -} rtk_int_polarity_t; - -/* Function Name: - * rtk_int_polarity_set - * Description: - * Set interrupt polarity configuration. - * Input: - * type - Interruptpolarity type. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set interrupt polarity configuration. - */ -extern rtk_api_ret_t rtk_int_polarity_set(rtk_int_polarity_t type); - -/* Function Name: - * rtk_int_polarity_get - * Description: - * Get interrupt polarity configuration. - * Input: - * None - * Output: - * pType - Interruptpolarity type. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can get interrupt polarity configuration. - */ -extern rtk_api_ret_t rtk_int_polarity_get(rtk_int_polarity_t *pType); - -/* Function Name: - * rtk_int_control_set - * Description: - * Set interrupt trigger status configuration. - * Input: - * type - Interrupt type. - * enable - Interrupt status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The API can set interrupt status configuration. - * The interrupt trigger status is shown in the following: - * - INT_TYPE_LINK_STATUS - * - INT_TYPE_METER_EXCEED - * - INT_TYPE_LEARN_LIMIT - * - INT_TYPE_LINK_SPEED - * - INT_TYPE_CONGEST - * - INT_TYPE_GREEN_FEATURE - * - INT_TYPE_LOOP_DETECT - * - INT_TYPE_8051, - * - INT_TYPE_CABLE_DIAG, - * - INT_TYPE_ACL, - * - INT_TYPE_SLIENT - */ -extern rtk_api_ret_t rtk_int_control_set(rtk_int_type_t type, rtk_enable_t enable); - -/* Function Name: - * rtk_int_control_get - * Description: - * Get interrupt trigger status configuration. - * Input: - * type - Interrupt type. - * Output: - * pEnable - Interrupt status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get interrupt status configuration. - * The interrupt trigger status is shown in the following: - * - INT_TYPE_LINK_STATUS - * - INT_TYPE_METER_EXCEED - * - INT_TYPE_LEARN_LIMIT - * - INT_TYPE_LINK_SPEED - * - INT_TYPE_CONGEST - * - INT_TYPE_GREEN_FEATURE - * - INT_TYPE_LOOP_DETECT - * - INT_TYPE_8051, - * - INT_TYPE_CABLE_DIAG, - * - INT_TYPE_ACL, - * - INT_TYPE_SLIENT - */ -extern rtk_api_ret_t rtk_int_control_get(rtk_int_type_t type, rtk_enable_t* pEnable); - -/* Function Name: - * rtk_int_status_set - * Description: - * Set interrupt trigger status to clean. - * Input: - * None - * Output: - * pStatusMask - Interrupt status bit mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can clean interrupt trigger status when interrupt happened. - * The interrupt trigger status is shown in the following: - * - INT_TYPE_LINK_STATUS (value[0] (Bit0)) - * - INT_TYPE_METER_EXCEED (value[0] (Bit1)) - * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2)) - * - INT_TYPE_LINK_SPEED (value[0] (Bit3)) - * - INT_TYPE_CONGEST (value[0] (Bit4)) - * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5)) - * - INT_TYPE_LOOP_DETECT (value[0] (Bit6)) - * - INT_TYPE_8051 (value[0] (Bit7)) - * - INT_TYPE_CABLE_DIAG (value[0] (Bit8)) - * - INT_TYPE_ACL (value[0] (Bit9)) - * - INT_TYPE_SLIENT (value[0] (Bit11)) - * The status will be cleared after execute this API. - */ -extern rtk_api_ret_t rtk_int_status_set(rtk_int_status_t *pStatusMask); - -/* Function Name: - * rtk_int_status_get - * Description: - * Get interrupt trigger status. - * Input: - * None - * Output: - * pStatusMask - Interrupt status bit mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get interrupt trigger status when interrupt happened. - * The interrupt trigger status is shown in the following: - * - INT_TYPE_LINK_STATUS (value[0] (Bit0)) - * - INT_TYPE_METER_EXCEED (value[0] (Bit1)) - * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2)) - * - INT_TYPE_LINK_SPEED (value[0] (Bit3)) - * - INT_TYPE_CONGEST (value[0] (Bit4)) - * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5)) - * - INT_TYPE_LOOP_DETECT (value[0] (Bit6)) - * - INT_TYPE_8051 (value[0] (Bit7)) - * - INT_TYPE_CABLE_DIAG (value[0] (Bit8)) - * - INT_TYPE_ACL (value[0] (Bit9)) - * - INT_TYPE_SLIENT (value[0] (Bit11)) - * - */ -extern rtk_api_ret_t rtk_int_status_get(rtk_int_status_t* pStatusMask); - -/* Function Name: - * rtk_int_advanceInfo_get - * Description: - * Get interrupt advanced information. - * Input: - * adv_type - Advanced interrupt type. - * Output: - * info - Information per type. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get advanced information when interrupt happened. - * The status will be cleared after execute this API. - */ -extern rtk_api_ret_t rtk_int_advanceInfo_get(rtk_int_advType_t adv_type, rtk_int_info_t* info); - - -#endif /* __RTK_API_INTERRUPT_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h deleted file mode 100644 index e0ccdbe3d7..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h +++ /dev/null @@ -1,1181 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes L2 module high-layer API defination - * - */ - -#ifndef __RTK_API_L2_H__ -#define __RTK_API_L2_H__ - - -/* - * Data Type Declaration - */ -#define RTK_MAX_NUM_OF_LEARN_LIMIT (rtk_switch_maxLutAddrNumber_get()) - -#define RTK_MAC_ADDR_LEN 6 -#define RTK_MAX_LUT_ADDRESS (RTK_MAX_NUM_OF_LEARN_LIMIT) -#define RTK_MAX_LUT_ADDR_ID (RTK_MAX_LUT_ADDRESS - 1) - -typedef rtk_uint32 rtk_l2_age_time_t; - -typedef enum rtk_l2_flood_type_e -{ - FLOOD_UNKNOWNDA = 0, - FLOOD_UNKNOWNMC, - FLOOD_BC, - FLOOD_END -} rtk_l2_flood_type_t; - -typedef rtk_uint32 rtk_l2_flushItem_t; - -typedef enum rtk_l2_flushType_e -{ - FLUSH_TYPE_BY_PORT = 0, /* physical port */ - FLUSH_TYPE_BY_PORT_VID, /* physical port + VID */ - FLUSH_TYPE_BY_PORT_FID, /* physical port + FID */ - FLUSH_TYPE_END -} rtk_l2_flushType_t; - -typedef struct rtk_l2_flushCfg_s -{ - rtk_enable_t flushByVid; - rtk_vlan_t vid; - rtk_enable_t flushByFid; - rtk_uint32 fid; - rtk_enable_t flushByPort; - rtk_port_t port; - rtk_enable_t flushByMac; - rtk_mac_t ucastAddr; - rtk_enable_t flushStaticAddr; - rtk_enable_t flushAddrOnAllPorts; /* this is used when flushByVid */ -} rtk_l2_flushCfg_t; - -typedef enum rtk_l2_read_method_e{ - - READMETHOD_MAC = 0, - READMETHOD_ADDRESS, - READMETHOD_NEXT_ADDRESS, - READMETHOD_NEXT_L2UC, - READMETHOD_NEXT_L2MC, - READMETHOD_NEXT_L3MC, - READMETHOD_NEXT_L2L3MC, - READMETHOD_NEXT_L2UCSPA, - READMETHOD_END -}rtk_l2_read_method_t; - -/* l2 limit learning count action */ -typedef enum rtk_l2_limitLearnCntAction_e -{ - LIMIT_LEARN_CNT_ACTION_DROP = 0, - LIMIT_LEARN_CNT_ACTION_FORWARD, - LIMIT_LEARN_CNT_ACTION_TO_CPU, - LIMIT_LEARN_CNT_ACTION_END -} rtk_l2_limitLearnCntAction_t; - -typedef enum rtk_l2_ipmc_lookup_type_e -{ - LOOKUP_MAC = 0, - LOOKUP_IP, - LOOKUP_IP_VID, - LOOKUP_END -} rtk_l2_ipmc_lookup_type_t; - -/* l2 address table - unicast data structure */ -typedef struct rtk_l2_ucastAddr_s -{ - rtk_mac_t mac; - rtk_uint32 ivl; - rtk_uint32 cvid; - rtk_uint32 fid; - rtk_uint32 efid; - rtk_uint32 port; - rtk_uint32 sa_block; - rtk_uint32 da_block; - rtk_uint32 auth; - rtk_uint32 is_static; - rtk_uint32 priority; - rtk_uint32 sa_pri_en; - rtk_uint32 fwd_pri_en; - rtk_uint32 address; -}rtk_l2_ucastAddr_t; - -/* l2 address table - multicast data structure */ -typedef struct rtk_l2_mcastAddr_s -{ - rtk_uint32 vid; - rtk_mac_t mac; - rtk_uint32 fid; - rtk_portmask_t portmask; - rtk_uint32 ivl; - rtk_uint32 priority; - rtk_uint32 fwd_pri_en; - rtk_uint32 igmp_asic; - rtk_uint32 igmp_index; - rtk_uint32 address; -}rtk_l2_mcastAddr_t; - -/* l2 address table - ip multicast data structure */ -typedef struct rtk_l2_ipMcastAddr_s -{ - ipaddr_t dip; - ipaddr_t sip; - rtk_portmask_t portmask; - rtk_uint32 priority; - rtk_uint32 fwd_pri_en; - rtk_uint32 igmp_asic; - rtk_uint32 igmp_index; - rtk_uint32 address; -}rtk_l2_ipMcastAddr_t; - -/* l2 address table - ip VID multicast data structure */ -typedef struct rtk_l2_ipVidMcastAddr_s -{ - ipaddr_t dip; - ipaddr_t sip; - rtk_uint32 vid; - rtk_portmask_t portmask; - rtk_uint32 address; -}rtk_l2_ipVidMcastAddr_t; - -typedef struct rtk_l2_addr_table_s -{ - rtk_uint32 index; - ipaddr_t sip; - ipaddr_t dip; - rtk_mac_t mac; - rtk_uint32 sa_block; - rtk_uint32 auth; - rtk_portmask_t portmask; - rtk_uint32 age; - rtk_uint32 ivl; - rtk_uint32 cvid; - rtk_uint32 fid; - rtk_uint32 is_ipmul; - rtk_uint32 is_static; - rtk_uint32 is_ipvidmul; - rtk_uint32 l3_vid; -}rtk_l2_addr_table_t; - -typedef enum rtk_l2_clearStatus_e -{ - L2_CLEAR_STATE_FINISH = 0, - L2_CLEAR_STATE_BUSY, - L2_CLEAR_STATE_END -}rtk_l2_clearStatus_t; - -/* Function Name: - * rtk_l2_init - * Description: - * Initialize l2 module of the specified device. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Initialize l2 module before calling any l2 APIs. - */ -extern rtk_api_ret_t rtk_l2_init(void); - -/* Function Name: - * rtk_l2_addr_add - * Description: - * Add LUT unicast entry. - * Input: - * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT. - * pL2_data - Unicast entry parameter - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the unicast mac address already existed in LUT, it will udpate the status of the entry. - * Otherwise, it will find an empty or asic auto learned entry to write. If all the entries - * with the same hash value can't be replaced, ASIC will return a RT_ERR_L2_INDEXTBL_FULL error. - */ -extern rtk_api_ret_t rtk_l2_addr_add(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data); - -/* Function Name: - * rtk_l2_addr_get - * Description: - * Get LUT unicast entry. - * Input: - * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT. - * Output: - * pL2_data - Unicast entry parameter - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the unicast mac address existed in LUT, it will return the port and fid where - * the mac is learned. Otherwise, it will return a RT_ERR_L2_ENTRY_NOTFOUND error. - */ -extern rtk_api_ret_t rtk_l2_addr_get(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data); - -/* Function Name: - * rtk_l2_addr_next_get - * Description: - * Get Next LUT unicast entry. - * Input: - * read_method - The reading method. - * port - The port number if the read_metohd is READMETHOD_NEXT_L2UCSPA - * pAddress - The Address ID - * Output: - * pL2_data - Unicast entry parameter - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next unicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all entries is LUT. - */ -extern rtk_api_ret_t rtk_l2_addr_next_get(rtk_l2_read_method_t read_method, rtk_port_t port, rtk_uint32 *pAddress, rtk_l2_ucastAddr_t *pL2_data); - -/* Function Name: - * rtk_l2_addr_del - * Description: - * Delete LUT unicast entry. - * Input: - * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT. - * fid - Filtering database - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the mac has existed in the LUT, it will be deleted. Otherwise, it will return RT_ERR_L2_ENTRY_NOTFOUND. - */ -extern rtk_api_ret_t rtk_l2_addr_del(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data); - -/* Function Name: - * rtk_l2_mcastAddr_add - * Description: - * Add LUT multicast entry. - * Input: - * pMcastAddr - L2 multicast entry structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_VID - Invalid VID . - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the multicast mac address already existed in the LUT, it will udpate the - * port mask of the entry. Otherwise, it will find an empty or asic auto learned - * entry to write. If all the entries with the same hash value can't be replaced, - * ASIC will return a RT_ERR_L2_INDEXTBL_FULL error. - */ -extern rtk_api_ret_t rtk_l2_mcastAddr_add(rtk_l2_mcastAddr_t *pMcastAddr); - -/* Function Name: - * rtk_l2_mcastAddr_get - * Description: - * Get LUT multicast entry. - * Input: - * pMcastAddr - L2 multicast entry structure - * Output: - * pMcastAddr - L2 multicast entry structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_VID - Invalid VID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the multicast mac address existed in the LUT, it will return the port where - * the mac is learned. Otherwise, it will return a RT_ERR_L2_ENTRY_NOTFOUND error. - */ -extern rtk_api_ret_t rtk_l2_mcastAddr_get(rtk_l2_mcastAddr_t *pMcastAddr); - -/* Function Name: - * rtk_l2_mcastAddr_next_get - * Description: - * Get Next L2 Multicast entry. - * Input: - * pAddress - The Address ID - * Output: - * pMcastAddr - L2 multicast entry structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next L2 multicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all multicast entries is LUT. - */ -extern rtk_api_ret_t rtk_l2_mcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_mcastAddr_t *pMcastAddr); - -/* Function Name: - * rtk_l2_mcastAddr_del - * Description: - * Delete LUT multicast entry. - * Input: - * pMcastAddr - L2 multicast entry structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_VID - Invalid VID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the mac has existed in the LUT, it will be deleted. Otherwise, it will return RT_ERR_L2_ENTRY_NOTFOUND. - */ -extern rtk_api_ret_t rtk_l2_mcastAddr_del(rtk_l2_mcastAddr_t *pMcastAddr); - -/* Function Name: - * rtk_l2_ipMcastAddr_add - * Description: - * Add Lut IP multicast entry - * Input: - * pIpMcastAddr - IP Multicast entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * System supports L2 entry with IP multicast DIP/SIP to forward IP multicasting frame as user - * desired. If this function is enabled, then system will be looked up L2 IP multicast entry to - * forward IP multicast frame directly without flooding. - */ -extern rtk_api_ret_t rtk_l2_ipMcastAddr_add(rtk_l2_ipMcastAddr_t *pIpMcastAddr); - -/* Function Name: - * rtk_l2_ipMcastAddr_get - * Description: - * Get LUT IP multicast entry. - * Input: - * pIpMcastAddr - IP Multicast entry - * Output: - * pIpMcastAddr - IP Multicast entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get Lut table of IP multicast entry. - */ -extern rtk_api_ret_t rtk_l2_ipMcastAddr_get(rtk_l2_ipMcastAddr_t *pIpMcastAddr); - -/* Function Name: - * rtk_l2_ipMcastAddr_next_get - * Description: - * Get Next IP Multicast entry. - * Input: - * pAddress - The Address ID - * Output: - * pIpMcastAddr - IP Multicast entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next IP multicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all IP multicast entries is LUT. - */ -extern rtk_api_ret_t rtk_l2_ipMcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_ipMcastAddr_t *pIpMcastAddr); - -/* Function Name: - * rtk_l2_ipMcastAddr_del - * Description: - * Delete a ip multicast address entry from the specified device. - * Input: - * pIpMcastAddr - IP Multicast entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can delete a IP multicast address entry from the specified device. - */ -extern rtk_api_ret_t rtk_l2_ipMcastAddr_del(rtk_l2_ipMcastAddr_t *pIpMcastAddr); - -/* Function Name: - * rtk_l2_ipVidMcastAddr_add - * Description: - * Add Lut IP multicast+VID entry - * Input: - * pIpVidMcastAddr - IP & VID multicast Entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_add(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr); - -/* Function Name: - * rtk_l2_ipVidMcastAddr_get - * Description: - * Get LUT IP multicast+VID entry. - * Input: - * pIpVidMcastAddr - IP & VID multicast Entry - * Output: - * pIpVidMcastAddr - IP & VID multicast Entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_get(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr); - -/* Function Name: - * rtk_l2_ipVidMcastAddr_next_get - * Description: - * Get Next IP Multicast+VID entry. - * Input: - * pAddress - The Address ID - * Output: - * pIpVidMcastAddr - IP & VID multicast Entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next IP multicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all IP multicast entries is LUT. - */ -extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr); - -/* Function Name: - * rtk_l2_ipVidMcastAddr_del - * Description: - * Delete a ip multicast+VID address entry from the specified device. - * Input: - * pIpVidMcastAddr - IP & VID multicast Entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_del(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr); - -/* Function Name: - * rtk_l2_ucastAddr_flush - * Description: - * Flush L2 mac address by type in the specified device (both dynamic and static). - * Input: - * pConfig - flush configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * flushByVid - 1: Flush by VID, 0: Don't flush by VID - * vid - VID (0 ~ 4095) - * flushByFid - 1: Flush by FID, 0: Don't flush by FID - * fid - FID (0 ~ 15) - * flushByPort - 1: Flush by Port, 0: Don't flush by Port - * port - Port ID - * flushByMac - Not Supported - * ucastAddr - Not Supported - * flushStaticAddr - 1: Flush both Static and Dynamic entries, 0: Flush only Dynamic entries - * flushAddrOnAllPorts - 1: Flush VID-matched entries at all ports, 0: Flush VID-matched entries per port. - */ -extern rtk_api_ret_t rtk_l2_ucastAddr_flush(rtk_l2_flushCfg_t *pConfig); - -/* Function Name: - * rtk_l2_table_clear - * Description: - * Flush all static & dynamic entries in LUT. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_table_clear(void); - -/* Function Name: - * rtk_l2_table_clearStatus_get - * Description: - * Get table clear status - * Input: - * None - * Output: - * pStatus - Clear status, 1:Busy, 0:finish - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_table_clearStatus_get(rtk_l2_clearStatus_t *pStatus); - -/* Function Name: - * rtk_l2_flushLinkDownPortAddrEnable_set - * Description: - * Set HW flush linkdown port mac configuration of the specified device. - * Input: - * port - Port id. - * enable - link down flush status - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The status of flush linkdown port address is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_l2_flushLinkDownPortAddrEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_l2_flushLinkDownPortAddrEnable_get - * Description: - * Get HW flush linkdown port mac configuration of the specified device. - * Input: - * port - Port id. - * Output: - * pEnable - link down flush status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The status of flush linkdown port address is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_l2_flushLinkDownPortAddrEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_l2_agingEnable_set - * Description: - * Set L2 LUT aging status per port setting. - * Input: - * port - Port id. - * enable - Aging status - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can be used to set L2 LUT aging status per port. - */ -extern rtk_api_ret_t rtk_l2_agingEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_l2_agingEnable_get - * Description: - * Get L2 LUT aging status per port setting. - * Input: - * port - Port id. - * Output: - * pEnable - Aging status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can be used to get L2 LUT aging function per port. - */ -extern rtk_api_ret_t rtk_l2_agingEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_l2_limitLearningCnt_set - * Description: - * Set per-Port auto learning limit number - * Input: - * port - Port id. - * mac_cnt - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number - * Note: - * The API can set per-port ASIC auto learning limit number from 0(disable learning) - * to 8k. - */ -extern rtk_api_ret_t rtk_l2_limitLearningCnt_set(rtk_port_t port, rtk_mac_cnt_t mac_cnt); - -/* Function Name: - * rtk_l2_limitLearningCnt_get - * Description: - * Get per-Port auto learning limit number - * Input: - * port - Port id. - * Output: - * pMac_cnt - Auto learning entries limit number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get per-port ASIC auto learning limit number. - */ -extern rtk_api_ret_t rtk_l2_limitLearningCnt_get(rtk_port_t port, rtk_mac_cnt_t *pMac_cnt); - -/* Function Name: - * rtk_l2_limitSystemLearningCnt_set - * Description: - * Set System auto learning limit number - * Input: - * mac_cnt - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number - * Note: - * The API can set system ASIC auto learning limit number from 0(disable learning) - * to 2112. - */ -extern rtk_api_ret_t rtk_l2_limitSystemLearningCnt_set(rtk_mac_cnt_t mac_cnt); - -/* Function Name: - * rtk_l2_limitSystemLearningCnt_get - * Description: - * Get System auto learning limit number - * Input: - * None - * Output: - * pMac_cnt - Auto learning entries limit number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get system ASIC auto learning limit number. - */ -extern rtk_api_ret_t rtk_l2_limitSystemLearningCnt_get(rtk_mac_cnt_t *pMac_cnt); - -/* Function Name: - * rtk_l2_limitLearningCntAction_set - * Description: - * Configure auto learn over limit number action. - * Input: - * port - Port id. - * action - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid learn over action - * Note: - * The API can set SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -extern rtk_api_ret_t rtk_l2_limitLearningCntAction_set(rtk_port_t port, rtk_l2_limitLearnCntAction_t action); - -/* Function Name: - * rtk_l2_limitLearningCntAction_get - * Description: - * Get auto learn over limit number action. - * Input: - * port - Port id. - * Output: - * pAction - Learn over action - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -extern rtk_api_ret_t rtk_l2_limitLearningCntAction_get(rtk_port_t port, rtk_l2_limitLearnCntAction_t *pAction); - -/* Function Name: - * rtk_l2_limitSystemLearningCntAction_set - * Description: - * Configure system auto learn over limit number action. - * Input: - * port - Port id. - * action - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid learn over action - * Note: - * The API can set SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -extern rtk_api_ret_t rtk_l2_limitSystemLearningCntAction_set(rtk_l2_limitLearnCntAction_t action); - -/* Function Name: - * rtk_l2_limitSystemLearningCntAction_get - * Description: - * Get system auto learn over limit number action. - * Input: - * None. - * Output: - * pAction - Learn over action - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -extern rtk_api_ret_t rtk_l2_limitSystemLearningCntAction_get(rtk_l2_limitLearnCntAction_t *pAction); - -/* Function Name: - * rtk_l2_limitSystemLearningCntPortMask_set - * Description: - * Configure system auto learn portmask - * Input: - * pPortmask - Port Mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_limitSystemLearningCntPortMask_set(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_l2_limitSystemLearningCntPortMask_get - * Description: - * get system auto learn portmask - * Input: - * None - * Output: - * pPortmask - Port Mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer. - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_limitSystemLearningCntPortMask_get(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_l2_learningCnt_get - * Description: - * Get per-Port current auto learning number - * Input: - * port - Port id. - * Output: - * pMac_cnt - ASIC auto learning entries number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get per-port ASIC auto learning number - */ -extern rtk_api_ret_t rtk_l2_learningCnt_get(rtk_port_t port, rtk_mac_cnt_t *pMac_cnt); - -/* Function Name: - * rtk_l2_floodPortMask_set - * Description: - * Set flooding portmask - * Input: - * type - flooding type. - * pFlood_portmask - flooding porkmask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set the flooding mask. - * The flooding type is as following: - * - FLOOD_UNKNOWNDA - * - FLOOD_UNKNOWNMC - * - FLOOD_BC - */ -extern rtk_api_ret_t rtk_l2_floodPortMask_set(rtk_l2_flood_type_t floood_type, rtk_portmask_t *pFlood_portmask); - -/* Function Name: - * rtk_l2_floodPortMask_get - * Description: - * Get flooding portmask - * Input: - * type - flooding type. - * Output: - * pFlood_portmask - flooding porkmask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get the flooding mask. - * The flooding type is as following: - * - FLOOD_UNKNOWNDA - * - FLOOD_UNKNOWNMC - * - FLOOD_BC - */ -extern rtk_api_ret_t rtk_l2_floodPortMask_get(rtk_l2_flood_type_t floood_type, rtk_portmask_t *pFlood_portmask); - -/* Function Name: - * rtk_l2_localPktPermit_set - * Description: - * Set permittion of frames if source port and destination port are the same. - * Input: - * port - Port id. - * permit - permittion status - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid permit value. - * Note: - * This API is setted to permit frame if its source port is equal to destination port. - */ -extern rtk_api_ret_t rtk_l2_localPktPermit_set(rtk_port_t port, rtk_enable_t permit); - -/* Function Name: - * rtk_l2_localPktPermit_get - * Description: - * Get permittion of frames if source port and destination port are the same. - * Input: - * port - Port id. - * Output: - * pPermit - permittion status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API is to get permittion status for frames if its source port is equal to destination port. - */ -extern rtk_api_ret_t rtk_l2_localPktPermit_get(rtk_port_t port, rtk_enable_t *pPermit); - -/* Function Name: - * rtk_l2_aging_set - * Description: - * Set LUT agging out speed - * Input: - * aging_time - Agging out time. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can set LUT agging out period for each entry and the range is from 14s to 800s. - */ -extern rtk_api_ret_t rtk_l2_aging_set(rtk_l2_age_time_t aging_time); - -/* Function Name: - * rtk_l2_aging_get - * Description: - * Get LUT agging out time - * Input: - * None - * Output: - * pEnable - Aging status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get LUT agging out period for each entry. - */ -extern rtk_api_ret_t rtk_l2_aging_get(rtk_l2_age_time_t *pAging_time); - -/* Function Name: - * rtk_l2_ipMcastAddrLookup_set - * Description: - * Set Lut IP multicast lookup function - * Input: - * type - Lookup type for IPMC packet. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API can work with rtk_l2_ipMcastAddrLookupException_add. - * If users set the lookup type to DIP, the group in exception table - * will be lookup by DIP+SIP - * If users set the lookup type to DIP+SIP, the group in exception table - * will be lookup by only DIP - */ -extern rtk_api_ret_t rtk_l2_ipMcastAddrLookup_set(rtk_l2_ipmc_lookup_type_t type); - -/* Function Name: - * rtk_l2_ipMcastAddrLookup_get - * Description: - * Get Lut IP multicast lookup function - * Input: - * None. - * Output: - * pType - Lookup type for IPMC packet. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -extern rtk_api_ret_t rtk_l2_ipMcastAddrLookup_get(rtk_l2_ipmc_lookup_type_t *pType); - -/* Function Name: - * rtk_l2_ipMcastForwardRouterPort_set - * Description: - * Set IPMC packet forward to rounter port also or not - * Input: - * enabled - 1: Inlcude router port, 0, exclude router port - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_ipMcastForwardRouterPort_set(rtk_enable_t enabled); - -/* Function Name: - * rtk_l2_ipMcastForwardRouterPort_get - * Description: - * Get IPMC packet forward to rounter port also or not - * Input: - * None. - * Output: - * pEnabled - 1: Inlcude router port, 0, exclude router port - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_l2_ipMcastForwardRouterPort_get(rtk_enable_t *pEnabled); - -/* Function Name: - * rtk_l2_ipMcastGroupEntry_add - * Description: - * Add an IP Multicast entry to group table - * Input: - * ip_addr - IP address - * vid - VLAN ID - * pPortmask - portmask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_TBL_FULL - Table Full - * Note: - * Add an entry to IP Multicast Group table. - */ -extern rtk_api_ret_t rtk_l2_ipMcastGroupEntry_add(ipaddr_t ip_addr, rtk_uint32 vid, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_l2_ipMcastGroupEntry_del - * Description: - * Delete an entry from IP Multicast group table - * Input: - * ip_addr - IP address - * vid - VLAN ID - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_TBL_FULL - Table Full - * Note: - * Delete an entry from IP Multicast group table. - */ -extern rtk_api_ret_t rtk_l2_ipMcastGroupEntry_del(ipaddr_t ip_addr, rtk_uint32 vid); - -/* Function Name: - * rtk_l2_ipMcastGroupEntry_get - * Description: - * get an entry from IP Multicast group table - * Input: - * ip_addr - IP address - * vid - VLAN ID - * Output: - * pPortmask - member port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_TBL_FULL - Table Full - * Note: - * Delete an entry from IP Multicast group table. - */ -extern rtk_api_ret_t rtk_l2_ipMcastGroupEntry_get(ipaddr_t ip_addr, rtk_uint32 vid, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_l2_entry_get - * Description: - * Get LUT unicast entry. - * Input: - * pL2_entry - Index field in the structure. - * Output: - * pL2_entry - other fields such as MAC, port, age... - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_EMPTY_ENTRY - Empty LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API is used to get address by index from 0~2111. - */ -extern rtk_api_ret_t rtk_l2_entry_get(rtk_l2_addr_table_t *pL2_entry); - - -#endif /* __RTK_API_L2_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/leaky.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/leaky.h deleted file mode 100644 index 13ef60df83..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/leaky.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes Leaky module high-layer API defination - * - */ - -#ifndef __RTK_API_LEAKY_H__ -#define __RTK_API_LEAKY_H__ - - -typedef enum rtk_leaky_type_e -{ - LEAKY_BRG_GROUP = 0, - LEAKY_FD_PAUSE, - LEAKY_SP_MCAST, - LEAKY_1X_PAE, - LEAKY_UNDEF_BRG_04, - LEAKY_UNDEF_BRG_05, - LEAKY_UNDEF_BRG_06, - LEAKY_UNDEF_BRG_07, - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - LEAKY_UNDEF_BRG_09, - LEAKY_UNDEF_BRG_0A, - LEAKY_UNDEF_BRG_0B, - LEAKY_UNDEF_BRG_0C, - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - LEAKY_8021AB, - LEAKY_UNDEF_BRG_0F, - LEAKY_BRG_MNGEMENT, - LEAKY_UNDEFINED_11, - LEAKY_UNDEFINED_12, - LEAKY_UNDEFINED_13, - LEAKY_UNDEFINED_14, - LEAKY_UNDEFINED_15, - LEAKY_UNDEFINED_16, - LEAKY_UNDEFINED_17, - LEAKY_UNDEFINED_18, - LEAKY_UNDEFINED_19, - LEAKY_UNDEFINED_1A, - LEAKY_UNDEFINED_1B, - LEAKY_UNDEFINED_1C, - LEAKY_UNDEFINED_1D, - LEAKY_UNDEFINED_1E, - LEAKY_UNDEFINED_1F, - LEAKY_GMRP, - LEAKY_GVRP, - LEAKY_UNDEF_GARP_22, - LEAKY_UNDEF_GARP_23, - LEAKY_UNDEF_GARP_24, - LEAKY_UNDEF_GARP_25, - LEAKY_UNDEF_GARP_26, - LEAKY_UNDEF_GARP_27, - LEAKY_UNDEF_GARP_28, - LEAKY_UNDEF_GARP_29, - LEAKY_UNDEF_GARP_2A, - LEAKY_UNDEF_GARP_2B, - LEAKY_UNDEF_GARP_2C, - LEAKY_UNDEF_GARP_2D, - LEAKY_UNDEF_GARP_2E, - LEAKY_UNDEF_GARP_2F, - LEAKY_IGMP, - LEAKY_IPMULTICAST, - LEAKY_CDP, - LEAKY_CSSTP, - LEAKY_LLDP, - LEAKY_END, -}rtk_leaky_type_t; - -/* Function Name: - * rtk_leaky_vlan_set - * Description: - * Set VLAN leaky. - * Input: - * type - Packet type for VLAN leaky. - * enable - Leaky status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input - * Note: - * This API can set VLAN leaky for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -extern rtk_api_ret_t rtk_leaky_vlan_set(rtk_leaky_type_t type, rtk_enable_t enable); - -/* Function Name: - * rtk_leaky_vlan_get - * Description: - * Get VLAN leaky. - * Input: - * type - Packet type for VLAN leaky. - * Output: - * pEnable - Leaky status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get VLAN leaky status for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -extern rtk_api_ret_t rtk_leaky_vlan_get(rtk_leaky_type_t type, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_leaky_portIsolation_set - * Description: - * Set port isolation leaky. - * Input: - * type - Packet type for port isolation leaky. - * enable - Leaky status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input - * Note: - * This API can set port isolation leaky for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -extern rtk_api_ret_t rtk_leaky_portIsolation_set(rtk_leaky_type_t type, rtk_enable_t enable); - -/* Function Name: - * rtk_leaky_portIsolation_get - * Description: - * Get port isolation leaky. - * Input: - * type - Packet type for port isolation leaky. - * Output: - * pEnable - Leaky status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get port isolation leaky status for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -extern rtk_api_ret_t rtk_leaky_portIsolation_get(rtk_leaky_type_t type, rtk_enable_t *pEnable); - -#endif /* __RTK_API_LEAKY_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/led.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/led.h deleted file mode 100644 index 71acc7c92c..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/led.h +++ /dev/null @@ -1,481 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes LED module high-layer API defination - * - */ - -#ifndef __RTK_API_LED_H__ -#define __RTK_API_LED_H__ - -typedef enum rtk_led_operation_e -{ - LED_OP_SCAN=0, - LED_OP_PARALLEL, - LED_OP_SERIAL, - LED_OP_END, -}rtk_led_operation_t; - - -typedef enum rtk_led_active_e -{ - LED_ACTIVE_HIGH=0, - LED_ACTIVE_LOW, - LED_ACTIVE_END, -}rtk_led_active_t; - -typedef enum rtk_led_config_e -{ - LED_CONFIG_LEDOFF=0, - LED_CONFIG_DUPCOL, - LED_CONFIG_LINK_ACT, - LED_CONFIG_SPD1000, - LED_CONFIG_SPD100, - LED_CONFIG_SPD10, - LED_CONFIG_SPD1000ACT, - LED_CONFIG_SPD100ACT, - LED_CONFIG_SPD10ACT, - LED_CONFIG_SPD10010ACT, - LED_CONFIG_LOOPDETECT, - LED_CONFIG_EEE, - LED_CONFIG_LINKRX, - LED_CONFIG_LINKTX, - LED_CONFIG_MASTER, - LED_CONFIG_ACT, - LED_CONFIG_END, -}rtk_led_congig_t; - -typedef struct rtk_led_ability_s -{ - rtk_enable_t link_10m; - rtk_enable_t link_100m; - rtk_enable_t link_500m; - rtk_enable_t link_1000m; - rtk_enable_t act_rx; - rtk_enable_t act_tx; -}rtk_led_ability_t; - -typedef enum rtk_led_blink_rate_e -{ - LED_BLINKRATE_32MS=0, - LED_BLINKRATE_64MS, - LED_BLINKRATE_128MS, - LED_BLINKRATE_256MS, - LED_BLINKRATE_512MS, - LED_BLINKRATE_1024MS, - LED_BLINKRATE_48MS, - LED_BLINKRATE_96MS, - LED_BLINKRATE_END, -}rtk_led_blink_rate_t; - -typedef enum rtk_led_group_e -{ - LED_GROUP_0 = 0, - LED_GROUP_1, - LED_GROUP_2, - LED_GROUP_END -}rtk_led_group_t; - - -typedef enum rtk_led_force_mode_e -{ - LED_FORCE_NORMAL=0, - LED_FORCE_BLINK, - LED_FORCE_OFF, - LED_FORCE_ON, - LED_FORCE_END -}rtk_led_force_mode_t; - -typedef enum rtk_led_serialOutput_e -{ - SERIAL_LED_NONE = 0, - SERIAL_LED_0, - SERIAL_LED_0_1, - SERIAL_LED_0_2, - SERIAL_LED_END, -}rtk_led_serialOutput_t; - - -/* Function Name: - * rtk_led_enable_set - * Description: - * Set Led enable congiuration - * Input: - * group - LED group id. - * pPortmask - LED enable port mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can be used to enable LED per port per group. - */ -extern rtk_api_ret_t rtk_led_enable_set(rtk_led_group_t group, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_led_enable_get - * Description: - * Get Led enable congiuration - * Input: - * group - LED group id. - * Output: - * pPortmask - LED enable port mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can be used to get LED enable status. - */ -extern rtk_api_ret_t rtk_led_enable_get(rtk_led_group_t group, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_led_operation_set - * Description: - * Set Led operation mode - * Input: - * mode - LED operation mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set Led operation mode. - * The modes that can be set are as following: - * - LED_OP_SCAN, - * - LED_OP_PARALLEL, - * - LED_OP_SERIAL, - */ -extern rtk_api_ret_t rtk_led_operation_set(rtk_led_operation_t mode); - -/* Function Name: - * rtk_led_operation_get - * Description: - * Get Led operation mode - * Input: - * None - * Output: - * pMode - Support LED operation mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get Led operation mode. - * The modes that can be set are as following: - * - LED_OP_SCAN, - * - LED_OP_PARALLEL, - * - LED_OP_SERIAL, - */ -extern rtk_api_ret_t rtk_led_operation_get(rtk_led_operation_t *pMode); - -/* Function Name: - * rtk_led_modeForce_set - * Description: - * Set Led group to congiuration force mode - * Input: - * port - port ID - * group - Support LED group id. - * mode - Support LED force mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Error Port ID - * Note: - * The API can force to one force mode. - * The force modes that can be set are as following: - * - LED_FORCE_NORMAL, - * - LED_FORCE_BLINK, - * - LED_FORCE_OFF, - * - LED_FORCE_ON. - */ -extern rtk_api_ret_t rtk_led_modeForce_set(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t mode); - -/* Function Name: - * rtk_led_modeForce_get - * Description: - * Get Led group to congiuration force mode - * Input: - * port - port ID - * group - Support LED group id. - * pMode - Support LED force mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Error Port ID - * Note: - * The API can get forced Led group mode. - * The force modes that can be set are as following: - * - LED_FORCE_NORMAL, - * - LED_FORCE_BLINK, - * - LED_FORCE_OFF, - * - LED_FORCE_ON. - */ -extern rtk_api_ret_t rtk_led_modeForce_get(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t *pMode); - -/* Function Name: - * rtk_led_blinkRate_set - * Description: - * Set LED blinking rate - * Input: - * blinkRate - blinking rate. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * ASIC support 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms. - */ -extern rtk_api_ret_t rtk_led_blinkRate_set(rtk_led_blink_rate_t blinkRate); - -/* Function Name: - * rtk_led_blinkRate_get - * Description: - * Get LED blinking rate at mode 0 to mode 3 - * Input: - * None - * Output: - * pBlinkRate - blinking rate. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms. - */ -extern rtk_api_ret_t rtk_led_blinkRate_get(rtk_led_blink_rate_t *pBlinkRate); - -/* Function Name: - * rtk_led_groupConfig_set - * Description: - * Set per group Led to congiuration mode - * Input: - * group - LED group. - * config - LED configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set LED indicated information configuration for each LED group with 1 to 1 led mapping to each port. - * - Definition LED Statuses Description - * - 0000 LED_Off LED pin Tri-State. - * - 0001 Dup/Col Collision, Full duplex Indicator. - * - 0010 Link/Act Link, Activity Indicator. - * - 0011 Spd1000 1000Mb/s Speed Indicator. - * - 0100 Spd100 100Mb/s Speed Indicator. - * - 0101 Spd10 10Mb/s Speed Indicator. - * - 0110 Spd1000/Act 1000Mb/s Speed/Activity Indicator. - * - 0111 Spd100/Act 100Mb/s Speed/Activity Indicator. - * - 1000 Spd10/Act 10Mb/s Speed/Activity Indicator. - * - 1001 Spd100 (10)/Act 10/100Mb/s Speed/Activity Indicator. - * - 1010 LoopDetect LoopDetect Indicator. - * - 1011 EEE EEE Indicator. - * - 1100 Link/Rx Link, Activity Indicator. - * - 1101 Link/Tx Link, Activity Indicator. - * - 1110 Master Link on Master Indicator. - * - 1111 Act Activity Indicator. Low for link established. - */ -extern rtk_api_ret_t rtk_led_groupConfig_set(rtk_led_group_t group, rtk_led_congig_t config); - -/* Function Name: - * rtk_led_groupConfig_get - * Description: - * Get Led group congiuration mode - * Input: - * group - LED group. - * Output: - * pConfig - LED configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get LED indicated information configuration for each LED group. - */ -extern rtk_api_ret_t rtk_led_groupConfig_get(rtk_led_group_t group, rtk_led_congig_t *pConfig); - -/* Function Name: - * rtk_led_groupAbility_set - * Description: - * Configure per group Led ability - * Input: - * group - LED group. - * pAbility - LED ability - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * None. - */ - -extern rtk_api_ret_t rtk_led_groupAbility_set(rtk_led_group_t group, rtk_led_ability_t *pAbility); - -/* Function Name: - * rtk_led_groupAbility_get - * Description: - * Get per group Led ability - * Input: - * group - LED group. - * pAbility - LED ability - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * None. - */ - -extern rtk_api_ret_t rtk_led_groupAbility_get(rtk_led_group_t group, rtk_led_ability_t *pAbility); - -/* Function Name: - * rtk_led_serialMode_set - * Description: - * Set Led serial mode active congiuration - * Input: - * active - LED group. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set LED serial mode active congiuration. - */ -extern rtk_api_ret_t rtk_led_serialMode_set(rtk_led_active_t active); - -/* Function Name: - * rtk_led_serialMode_get - * Description: - * Get Led group congiuration mode - * Input: - * group - LED group. - * Output: - * pConfig - LED configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get LED serial mode active configuration. - */ -extern rtk_api_ret_t rtk_led_serialMode_get(rtk_led_active_t *pActive); - -/* Function Name: - * rtk_led_OutputEnable_set - * Description: - * This API set LED I/O state. - * Input: - * enabled - LED I/O state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set LED I/O state. - */ -extern rtk_api_ret_t rtk_led_OutputEnable_set(rtk_enable_t state); - - -/* Function Name: - * rtk_led_OutputEnable_get - * Description: - * This API get LED I/O state. - * Input: - * None. - * Output: - * pEnabled - LED I/O state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current LED I/O state. - */ -extern rtk_api_ret_t rtk_led_OutputEnable_get(rtk_enable_t *pState); - -/* Function Name: - * rtk_led_serialModePortmask_set - * Description: - * This API configure Serial LED output Group and portmask - * Input: - * output - output group - * pPortmask - output portmask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * None. - */ -extern rtk_api_ret_t rtk_led_serialModePortmask_set(rtk_led_serialOutput_t output, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_led_serialModePortmask_get - * Description: - * This API get Serial LED output Group and portmask - * Input: - * None. - * Output: - * pOutput - output group - * pPortmask - output portmask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * None. - */ -extern rtk_api_ret_t rtk_led_serialModePortmask_get(rtk_led_serialOutput_t *pOutput, rtk_portmask_t *pPortmask); - -#endif /* __RTK_API_LED_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/mirror.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/mirror.h deleted file mode 100644 index 1e984b7d80..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/mirror.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes Mirror module high-layer API defination - * - */ - -#ifndef __RTK_API_MIRROR_H__ -#define __RTK_API_MIRROR_H__ - -typedef enum rtk_mirror_keep_e -{ - MIRROR_FOLLOW_VLAN = 0, - MIRROR_KEEP_ORIGINAL, - MIRROR_KEEP_END -}rtk_mirror_keep_t; - - -/* Function Name: - * rtk_mirror_portBased_set - * Description: - * Set port mirror function. - * Input: - * mirroring_port - Monitor port. - * pMirrored_rx_portmask - Rx mirror port mask. - * pMirrored_tx_portmask - Tx mirror port mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * The API is to set mirror function of source port and mirror port. - * The mirror port can only be set to one port and the TX and RX mirror ports - * should be identical. - */ -extern rtk_api_ret_t rtk_mirror_portBased_set(rtk_port_t mirroring_port, rtk_portmask_t *pMirrored_rx_portmask, rtk_portmask_t *pMirrored_tx_portmask); - -/* Function Name: - * rtk_mirror_portBased_get - * Description: - * Get port mirror function. - * Input: - * None - * Output: - * pMirroring_port - Monitor port. - * pMirrored_rx_portmask - Rx mirror port mask. - * pMirrored_tx_portmask - Tx mirror port mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror function of source port and mirror port. - */ -extern rtk_api_ret_t rtk_mirror_portBased_get(rtk_port_t* pMirroring_port, rtk_portmask_t *pMirrored_rx_portmask, rtk_portmask_t *pMirrored_tx_portmask); - -/* Function Name: - * rtk_mirror_portIso_set - * Description: - * Set mirror port isolation. - * Input: - * enable |Mirror isolation status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set mirror isolation function that prevent normal forwarding packets to miror port. - */ -extern rtk_api_ret_t rtk_mirror_portIso_set(rtk_enable_t enable); - -/* Function Name: - * rtk_mirror_portIso_get - * Description: - * Get mirror port isolation. - * Input: - * None - * Output: - * pEnable |Mirror isolation status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror isolation status. - */ -extern rtk_api_ret_t rtk_mirror_portIso_get(rtk_enable_t *pEnable); - -/* Function Name: - * rtk_mirror_vlanLeaky_set - * Description: - * Set mirror VLAN leaky. - * Input: - * txenable -TX leaky enable. - * rxenable - RX leaky enable. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set mirror VLAN leaky function forwarding packets to miror port. - */ -extern rtk_api_ret_t rtk_mirror_vlanLeaky_set(rtk_enable_t txenable, rtk_enable_t rxenable); - - -/* Function Name: - * rtk_mirror_vlanLeaky_get - * Description: - * Get mirror VLAN leaky. - * Input: - * None - * Output: - * pTxenable - TX leaky enable. - * pRxenable - RX leaky enable. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror VLAN leaky status. - */ -extern rtk_api_ret_t rtk_mirror_vlanLeaky_get(rtk_enable_t *pTxenable, rtk_enable_t *pRxenable); - -/* Function Name: - * rtk_mirror_isolationLeaky_set - * Description: - * Set mirror Isolation leaky. - * Input: - * txenable -TX leaky enable. - * rxenable - RX leaky enable. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set mirror VLAN leaky function forwarding packets to miror port. - */ -extern rtk_api_ret_t rtk_mirror_isolationLeaky_set(rtk_enable_t txenable, rtk_enable_t rxenable); - -/* Function Name: - * rtk_mirror_isolationLeaky_get - * Description: - * Get mirror isolation leaky. - * Input: - * None - * Output: - * pTxenable - TX leaky enable. - * pRxenable - RX leaky enable. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror isolation leaky status. - */ -extern rtk_api_ret_t rtk_mirror_isolationLeaky_get(rtk_enable_t *pTxenable, rtk_enable_t *pRxenable); - -/* Function Name: - * rtk_mirror_keep_set - * Description: - * Set mirror packet format keep. - * Input: - * mode - -mirror keep mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set -mirror keep mode. - * The mirror keep mode is as following: - * - MIRROR_FOLLOW_VLAN - * - MIRROR_KEEP_ORIGINAL - * - MIRROR_KEEP_END - */ -extern rtk_api_ret_t rtk_mirror_keep_set(rtk_mirror_keep_t mode); - - -/* Function Name: - * rtk_mirror_keep_get - * Description: - * Get mirror packet format keep. - * Input: - * None - * Output: - * pMode -mirror keep mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror keep mode. - * The mirror keep mode is as following: - * - MIRROR_FOLLOW_VLAN - * - MIRROR_KEEP_ORIGINAL - * - MIRROR_KEEP_END - */ -extern rtk_api_ret_t rtk_mirror_keep_get(rtk_mirror_keep_t *pMode); - -/* Function Name: - * rtk_mirror_override_set - * Description: - * Set port mirror override function. - * Input: - * rxMirror - 1: output mirrored packet, 0: output normal forward packet - * txMirror - 1: output mirrored packet, 0: output normal forward packet - * aclMirror - 1: output mirrored packet, 0: output normal forward packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API is to set mirror override function. - * This function control the output format when a port output - * normal forward & mirrored packet at the same time. - */ -extern rtk_api_ret_t rtk_mirror_override_set(rtk_enable_t rxMirror, rtk_enable_t txMirror, rtk_enable_t aclMirror); - -/* Function Name: - * rtk_mirror_override_get - * Description: - * Get port mirror override function. - * Input: - * None - * Output: - * pRxMirror - 1: output mirrored packet, 0: output normal forward packet - * pTxMirror - 1: output mirrored packet, 0: output normal forward packet - * pAclMirror - 1: output mirrored packet, 0: output normal forward packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * The API is to Get mirror override function. - * This function control the output format when a port output - * normal forward & mirrored packet at the same time. - */ -extern rtk_api_ret_t rtk_mirror_override_get(rtk_enable_t *pRxMirror, rtk_enable_t *pTxMirror, rtk_enable_t *pAclMirror); - -#endif /* __RTK_API_MIRROR_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/oam.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/oam.h deleted file mode 100644 index 1fc14bd62f..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/oam.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes the following modules and sub-modules - * (1) OAM (802.3ah) configuration - * - */ - -#ifndef __RTK_OAM_H__ -#define __RTK_OAM_H__ - -/* - * Symbol Definition - */ - - -/* - * Data Declaration - */ - - -/* - * Macro Declaration - */ - -typedef enum rtk_oam_parser_act_e -{ - OAM_PARSER_ACTION_FORWARD = 0, - OAM_PARSER_ACTION_LOOPBACK, - OAM_PARSER_ACTION_DISCARD, - OAM_PARSER_ACTION_END, - -} rtk_oam_parser_act_t; - -typedef enum rtk_oam_multiplexer_act_e -{ - OAM_MULTIPLEXER_ACTION_FORWARD = 0, - OAM_MULTIPLEXER_ACTION_DISCARD, - OAM_MULTIPLEXER_ACTION_CPUONLY, - OAM_MULTIPLEXER_ACTION_END, - -} rtk_oam_multiplexer_act_t; - - -/* - * Function Declaration - */ - -/* Function Name: - * rtk_oam_init - * Description: - * Initialize oam module. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * Must initialize oam module before calling any oam APIs. - */ -extern rtk_api_ret_t rtk_oam_init(void); - -/* Function Name: - * rtk_oam_state_set - * Description: - * This API set OAM state. - * Input: - * enabled -OAMstate - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set OAM state. - */ -extern rtk_api_ret_t rtk_oam_state_set(rtk_enable_t enabled); - -/* Function Name: - * rtk_oam_state_get - * Description: - * This API get OAM state. - * Input: - * None. - * Output: - * pEnabled - H/W IGMP state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current OAM state. - */ -extern rtk_api_ret_t rtk_oam_state_get(rtk_enable_t *pEnabled); - - -/* Module Name : OAM */ - -/* Function Name: - * rtk_oam_parserAction_set - * Description: - * Set OAM parser action - * Input: - * port - port id - * action - parser action - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -extern rtk_api_ret_t rtk_oam_parserAction_set(rtk_port_t port, rtk_oam_parser_act_t action); - -/* Function Name: - * rtk_oam_parserAction_set - * Description: - * Get OAM parser action - * Input: - * port - port id - * Output: - * pAction - parser action - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -extern rtk_api_ret_t rtk_oam_parserAction_get(rtk_port_t port, rtk_oam_parser_act_t *pAction); - - -/* Function Name: - * rtk_oam_multiplexerAction_set - * Description: - * Set OAM multiplexer action - * Input: - * port - port id - * action - parser action - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -extern rtk_api_ret_t rtk_oam_multiplexerAction_set(rtk_port_t port, rtk_oam_multiplexer_act_t action); - -/* Function Name: - * rtk_oam_multiplexerAction_set - * Description: - * Get OAM multiplexer action - * Input: - * port - port id - * Output: - * pAction - parser action - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -extern rtk_api_ret_t rtk_oam_multiplexerAction_get(rtk_port_t port, rtk_oam_multiplexer_act_t *pAction); - - -#endif /* __RTK_OAM_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/port.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/port.h deleted file mode 100644 index fcac1bcb84..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/port.h +++ /dev/null @@ -1,959 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes port module high-layer API defination - * - */ - -#ifndef __RTK_API_PORT_H__ -#define __RTK_API_PORT_H__ - -/* - * Data Type Declaration - */ - -#define PHY_CONTROL_REG 0 -#define PHY_STATUS_REG 1 -#define PHY_AN_ADVERTISEMENT_REG 4 -#define PHY_AN_LINKPARTNER_REG 5 -#define PHY_1000_BASET_CONTROL_REG 9 -#define PHY_1000_BASET_STATUS_REG 10 -#define PHY_RESOLVED_REG 26 - -#define RTK_EFID_MAX 0x7 - -#define RTK_FIBER_FORCE_1000M 3 -#define RTK_FIBER_FORCE_100M 5 -#define RTK_FIBER_FORCE_100M1000M 7 - -#define RTK_INDRECT_ACCESS_CRTL 0x1f00 -#define RTK_INDRECT_ACCESS_STATUS 0x1f01 -#define RTK_INDRECT_ACCESS_ADDRESS 0x1f02 -#define RTK_INDRECT_ACCESS_WRITE_DATA 0x1f03 -#define RTK_INDRECT_ACCESS_READ_DATA 0x1f04 -#define RTK_INDRECT_ACCESS_DELAY 0x1f80 -#define RTK_INDRECT_ACCESS_BURST 0x1f81 -#define RTK_RW_MASK 0x2 -#define RTK_CMD_MASK 0x1 -#define RTK_PHY_BUSY_OFFSET 2 - - -typedef enum rtk_mode_ext_e -{ - MODE_EXT_DISABLE = 0, - MODE_EXT_RGMII, - MODE_EXT_MII_MAC, - MODE_EXT_MII_PHY, - MODE_EXT_TMII_MAC, - MODE_EXT_TMII_PHY, - MODE_EXT_GMII, - MODE_EXT_RMII_MAC, - MODE_EXT_RMII_PHY, - MODE_EXT_SGMII, - MODE_EXT_HSGMII, - MODE_EXT_1000X_100FX, - MODE_EXT_1000X, - MODE_EXT_100FX, - MODE_EXT_RGMII_2, - MODE_EXT_MII_MAC_2, - MODE_EXT_MII_PHY_2, - MODE_EXT_TMII_MAC_2, - MODE_EXT_TMII_PHY_2, - MODE_EXT_RMII_MAC_2, - MODE_EXT_RMII_PHY_2, - MODE_EXT_END -} rtk_mode_ext_t; - -typedef enum rtk_port_duplex_e -{ - PORT_HALF_DUPLEX = 0, - PORT_FULL_DUPLEX, - PORT_DUPLEX_END -} rtk_port_duplex_t; - -typedef enum rtk_port_linkStatus_e -{ - PORT_LINKDOWN = 0, - PORT_LINKUP, - PORT_LINKSTATUS_END -} rtk_port_linkStatus_t; - -typedef struct rtk_port_mac_ability_s -{ - rtk_uint32 forcemode; - rtk_uint32 speed; - rtk_uint32 duplex; - rtk_uint32 link; - rtk_uint32 nway; - rtk_uint32 txpause; - rtk_uint32 rxpause; -}rtk_port_mac_ability_t; - -typedef struct rtk_port_phy_ability_s -{ - rtk_uint32 AutoNegotiation; /*PHY register 0.12 setting for auto-negotiation process*/ - rtk_uint32 Half_10; /*PHY register 4.5 setting for 10BASE-TX half duplex capable*/ - rtk_uint32 Full_10; /*PHY register 4.6 setting for 10BASE-TX full duplex capable*/ - rtk_uint32 Half_100; /*PHY register 4.7 setting for 100BASE-TX half duplex capable*/ - rtk_uint32 Full_100; /*PHY register 4.8 setting for 100BASE-TX full duplex capable*/ - rtk_uint32 Full_1000; /*PHY register 9.9 setting for 1000BASE-T full duplex capable*/ - rtk_uint32 FC; /*PHY register 4.10 setting for flow control capability*/ - rtk_uint32 AsyFC; /*PHY register 4.11 setting for asymmetric flow control capability*/ -} rtk_port_phy_ability_t; - -typedef rtk_uint32 rtk_port_phy_data_t; /* phy page */ - -typedef enum rtk_port_phy_mdix_mode_e -{ - PHY_AUTO_CROSSOVER_MODE= 0, - PHY_FORCE_MDI_MODE, - PHY_FORCE_MDIX_MODE, - PHY_FORCE_MODE_END -} rtk_port_phy_mdix_mode_t; - -typedef enum rtk_port_phy_mdix_status_e -{ - PHY_STATUS_AUTO_MDI_MODE= 0, - PHY_STATUS_AUTO_MDIX_MODE, - PHY_STATUS_FORCE_MDI_MODE, - PHY_STATUS_FORCE_MDIX_MODE, - PHY_STATUS_FORCE_MODE_END -} rtk_port_phy_mdix_status_t; - -typedef rtk_uint32 rtk_port_phy_page_t; /* phy page */ - -typedef enum rtk_port_phy_reg_e -{ - PHY_REG_CONTROL = 0, - PHY_REG_STATUS, - PHY_REG_IDENTIFIER_1, - PHY_REG_IDENTIFIER_2, - PHY_REG_AN_ADVERTISEMENT, - PHY_REG_AN_LINKPARTNER, - PHY_REG_1000_BASET_CONTROL = 9, - PHY_REG_1000_BASET_STATUS, - PHY_REG_END = 32 -} rtk_port_phy_reg_t; - -typedef enum rtk_port_phy_test_mode_e -{ - PHY_TEST_MODE_NORMAL= 0, - PHY_TEST_MODE_1, - PHY_TEST_MODE_2, - PHY_TEST_MODE_3, - PHY_TEST_MODE_4, - PHY_TEST_MODE_END -} rtk_port_phy_test_mode_t; - -typedef enum rtk_port_speed_e -{ - PORT_SPEED_10M = 0, - PORT_SPEED_100M, - PORT_SPEED_1000M, - PORT_SPEED_500M, - PORT_SPEED_2500M, - PORT_SPEED_END -} rtk_port_speed_t; - -typedef enum rtk_port_media_e -{ - PORT_MEDIA_COPPER = 0, - PORT_MEDIA_FIBER, - PORT_MEDIA_END -}rtk_port_media_t; - -typedef struct rtk_rtctResult_s -{ - rtk_port_speed_t linkType; - union - { - struct fe_result_s - { - rtk_uint32 isRxShort; - rtk_uint32 isTxShort; - rtk_uint32 isRxOpen; - rtk_uint32 isTxOpen; - rtk_uint32 isRxMismatch; - rtk_uint32 isTxMismatch; - rtk_uint32 isRxLinedriver; - rtk_uint32 isTxLinedriver; - rtk_uint32 rxLen; - rtk_uint32 txLen; - } fe_result; - - struct ge_result_s - { - rtk_uint32 channelAShort; - rtk_uint32 channelBShort; - rtk_uint32 channelCShort; - rtk_uint32 channelDShort; - - rtk_uint32 channelAOpen; - rtk_uint32 channelBOpen; - rtk_uint32 channelCOpen; - rtk_uint32 channelDOpen; - - rtk_uint32 channelAMismatch; - rtk_uint32 channelBMismatch; - rtk_uint32 channelCMismatch; - rtk_uint32 channelDMismatch; - - rtk_uint32 channelALinedriver; - rtk_uint32 channelBLinedriver; - rtk_uint32 channelCLinedriver; - rtk_uint32 channelDLinedriver; - - rtk_uint32 channelALen; - rtk_uint32 channelBLen; - rtk_uint32 channelCLen; - rtk_uint32 channelDLen; - } ge_result; - }result; -} rtk_rtctResult_t; - -/* Function Name: - * rtk_port_phyAutoNegoAbility_set - * Description: - * Set ethernet PHY auto-negotiation desired ability. - * Input: - * port - port id. - * pAbility - Ability structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * If Full_1000 bit is set to 1, the AutoNegotiation will be automatic set to 1. While both AutoNegotiation and Full_1000 are set to 0, the PHY speed and duplex selection will - * be set as following 100F > 100H > 10F > 10H priority sequence. - */ -extern rtk_api_ret_t rtk_port_phyAutoNegoAbility_set(rtk_port_t port, rtk_port_phy_ability_t *pAbility); - -/* Function Name: - * rtk_port_phyAutoNegoAbility_get - * Description: - * Get PHY ability through PHY registers. - * Input: - * port - Port id. - * Output: - * pAbility - Ability structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * Get the capablity of specified PHY. - */ -extern rtk_api_ret_t rtk_port_phyAutoNegoAbility_get(rtk_port_t port, rtk_port_phy_ability_t *pAbility); - -/* Function Name: - * rtk_port_phyForceModeAbility_set - * Description: - * Set the port speed/duplex mode/pause/asy_pause in the PHY force mode. - * Input: - * port - port id. - * pAbility - Ability structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * While both AutoNegotiation and Full_1000 are set to 0, the PHY speed and duplex selection will - * be set as following 100F > 100H > 10F > 10H priority sequence. - */ -extern rtk_api_ret_t rtk_port_phyForceModeAbility_set(rtk_port_t port, rtk_port_phy_ability_t *pAbility); - -/* Function Name: - * rtk_port_phyForceModeAbility_get - * Description: - * Get PHY ability through PHY registers. - * Input: - * port - Port id. - * Output: - * pAbility - Ability structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * Get the capablity of specified PHY. - */ -extern rtk_api_ret_t rtk_port_phyForceModeAbility_get(rtk_port_t port, rtk_port_phy_ability_t *pAbility); - -/* Function Name: - * rtk_port_phyStatus_get - * Description: - * Get ethernet PHY linking status - * Input: - * port - Port id. - * Output: - * linkStatus - PHY link status - * speed - PHY link speed - * duplex - PHY duplex mode - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * API will return auto negotiation status of phy. - */ -extern rtk_api_ret_t rtk_port_phyStatus_get(rtk_port_t port, rtk_port_linkStatus_t *pLinkStatus, rtk_port_speed_t *pSpeed, rtk_port_duplex_t *pDuplex); - -/* Function Name: - * rtk_port_macForceLink_set - * Description: - * Set port force linking configuration. - * Input: - * port - port id. - * pPortability - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can set Port/MAC force mode properties. - */ -extern rtk_api_ret_t rtk_port_macForceLink_set(rtk_port_t port, rtk_port_mac_ability_t *pPortability); - -/* Function Name: - * rtk_port_macForceLink_get - * Description: - * Get port force linking configuration. - * Input: - * port - Port id. - * Output: - * pPortability - port ability configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get Port/MAC force mode properties. - */ -extern rtk_api_ret_t rtk_port_macForceLink_get(rtk_port_t port, rtk_port_mac_ability_t *pPortability); - -/* Function Name: - * rtk_port_macForceLinkExt_set - * Description: - * Set external interface force linking configuration. - * Input: - * port - external port ID - * mode - external interface mode - * pPortability - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set external interface force mode properties. - * The external interface can be set to: - * - MODE_EXT_DISABLE, - * - MODE_EXT_RGMII, - * - MODE_EXT_MII_MAC, - * - MODE_EXT_MII_PHY, - * - MODE_EXT_TMII_MAC, - * - MODE_EXT_TMII_PHY, - * - MODE_EXT_GMII, - * - MODE_EXT_RMII_MAC, - * - MODE_EXT_RMII_PHY, - * - MODE_EXT_SGMII, - * - MODE_EXT_HSGMII, - * - MODE_EXT_1000X_100FX, - * - MODE_EXT_1000X, - * - MODE_EXT_100FX, - */ -extern rtk_api_ret_t rtk_port_macForceLinkExt_set(rtk_port_t port, rtk_mode_ext_t mode, rtk_port_mac_ability_t *pPortability); - -/* Function Name: - * rtk_port_macForceLinkExt_get - * Description: - * Set external interface force linking configuration. - * Input: - * port - external port ID - * Output: - * pMode - external interface mode - * pPortability - port ability configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get external interface force mode properties. - */ -extern rtk_api_ret_t rtk_port_macForceLinkExt_get(rtk_port_t port, rtk_mode_ext_t *pMode, rtk_port_mac_ability_t *pPortability); - -/* Function Name: - * rtk_port_macStatus_get - * Description: - * Get port link status. - * Input: - * port - Port id. - * Output: - * pPortstatus - port ability configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get Port/PHY properties. - */ -extern rtk_api_ret_t rtk_port_macStatus_get(rtk_port_t port, rtk_port_mac_ability_t *pPortstatus); - -/* Function Name: - * rtk_port_macLocalLoopbackEnable_set - * Description: - * Set Port Local Loopback. (Redirect TX to RX.) - * Input: - * port - Port id. - * enable - Loopback state, 0:disable, 1:enable - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can enable/disable Local loopback in MAC. - * For UTP port, This API will also enable the digital - * loopback bit in PHY register for sync of speed between - * PHY and MAC. For EXT port, users need to force the - * link state by themself. - */ -extern rtk_api_ret_t rtk_port_macLocalLoopbackEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_port_macLocalLoopbackEnable_get - * Description: - * Get Port Local Loopback. (Redirect TX to RX.) - * Input: - * port - Port id. - * Output: - * pEnable - Loopback state, 0:disable, 1:enable - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -extern rtk_api_ret_t rtk_port_macLocalLoopbackEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_port_phyReg_set - * Description: - * Set PHY register data of the specific port. - * Input: - * port - port id. - * reg - Register id - * regData - Register data - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * This API can set PHY register data of the specific port. - */ -extern rtk_api_ret_t rtk_port_phyReg_set(rtk_port_t port, rtk_port_phy_reg_t reg, rtk_port_phy_data_t value); - -/* Function Name: - * rtk_port_phyReg_get - * Description: - * Get PHY register data of the specific port. - * Input: - * port - Port id. - * reg - Register id - * Output: - * pData - Register data - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * This API can get PHY register data of the specific port. - */ -extern rtk_api_ret_t rtk_port_phyReg_get(rtk_port_t port, rtk_port_phy_reg_t reg, rtk_port_phy_data_t *pData); - -/* Function Name: - * rtk_port_backpressureEnable_set - * Description: - * Set the half duplex backpressure enable status of the specific port. - * Input: - * port - port id. - * enable - Back pressure status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set the half duplex backpressure enable status of the specific port. - * The half duplex backpressure enable status of the port is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_port_backpressureEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_port_backpressureEnable_get - * Description: - * Get the half duplex backpressure enable status of the specific port. - * Input: - * port - Port id. - * Output: - * pEnable - Back pressure status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get the half duplex backpressure enable status of the specific port. - * The half duplex backpressure enable status of the port is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_port_backpressureEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_port_adminEnable_set - * Description: - * Set port admin configuration of the specific port. - * Input: - * port - port id. - * enable - Back pressure status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set port admin configuration of the specific port. - * The port admin configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_port_adminEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_port_adminEnable_get - * Description: - * Get port admin configurationof the specific port. - * Input: - * port - Port id. - * Output: - * pEnable - Back pressure status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get port admin configuration of the specific port. - * The port admin configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_port_adminEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_port_isolation_set - * Description: - * Set permitted port isolation portmask - * Input: - * port - port id. - * pPortmask - Permit port mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * This API set the port mask that a port can trasmit packet to of each port - * A port can only transmit packet to ports included in permitted portmask - */ -extern rtk_api_ret_t rtk_port_isolation_set(rtk_port_t port, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_port_isolation_get - * Description: - * Get permitted port isolation portmask - * Input: - * port - Port id. - * Output: - * pPortmask - Permit port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API get the port mask that a port can trasmit packet to of each port - * A port can only transmit packet to ports included in permitted portmask - */ -extern rtk_api_ret_t rtk_port_isolation_get(rtk_port_t port, rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_port_rgmiiDelayExt_set - * Description: - * Set RGMII interface delay value for TX and RX. - * Input: - * txDelay - TX delay value, 1 for delay 2ns and 0 for no-delay - * rxDelay - RX delay value, 0~7 for delay setup. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set external interface 2 RGMII delay. - * In TX delay, there are 2 selection: no-delay and 2ns delay. - * In RX dekay, there are 8 steps for delay tunning. 0 for no-delay, and 7 for maximum delay. - */ -extern rtk_api_ret_t rtk_port_rgmiiDelayExt_set(rtk_port_t port, rtk_data_t txDelay, rtk_data_t rxDelay); - -/* Function Name: - * rtk_port_rgmiiDelayExt_get - * Description: - * Get RGMII interface delay value for TX and RX. - * Input: - * None - * Output: - * pTxDelay - TX delay value - * pRxDelay - RX delay value - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set external interface 2 RGMII delay. - * In TX delay, there are 2 selection: no-delay and 2ns delay. - * In RX dekay, there are 8 steps for delay tunning. 0 for n0-delay, and 7 for maximum delay. - */ -extern rtk_api_ret_t rtk_port_rgmiiDelayExt_get(rtk_port_t port, rtk_data_t *pTxDelay, rtk_data_t *pRxDelay); - -/* Function Name: - * rtk_port_phyEnableAll_set - * Description: - * Set all PHY enable status. - * Input: - * enable - PHY Enable State. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set all PHY status. - * The configuration of all PHY is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_port_phyEnableAll_set(rtk_enable_t enable); - -/* Function Name: - * rtk_port_phyEnableAll_get - * Description: - * Get all PHY enable status. - * Input: - * None - * Output: - * pEnable - PHY Enable State. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API can set all PHY status. - * The configuration of all PHY is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_port_phyEnableAll_get(rtk_enable_t *pEnable); - -/* Function Name: - * rtk_port_efid_set - * Description: - * Set port-based enhanced filtering database - * Input: - * port - Port id. - * efid - Specified enhanced filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_FID - Invalid fid. - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can set port-based enhanced filtering database. - */ -extern rtk_api_ret_t rtk_port_efid_set(rtk_port_t port, rtk_data_t efid); - -/* Function Name: - * rtk_port_efid_get - * Description: - * Get port-based enhanced filtering database - * Input: - * port - Port id. - * Output: - * pEfid - Specified enhanced filtering database. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can get port-based enhanced filtering database status. - */ -extern rtk_api_ret_t rtk_port_efid_get(rtk_port_t port, rtk_data_t *pEfid); - -/* Function Name: - * rtk_port_phyComboPortMedia_set - * Description: - * Set Combo port media type - * Input: - * port - Port id. (Should be Port 4) - * media - Media (COPPER or FIBER) - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can Set Combo port media type. - */ -extern rtk_api_ret_t rtk_port_phyComboPortMedia_set(rtk_port_t port, rtk_port_media_t media); - -/* Function Name: - * rtk_port_phyComboPortMedia_get - * Description: - * Get Combo port media type - * Input: - * port - Port id. (Should be Port 4) - * Output: - * pMedia - Media (COPPER or FIBER) - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can Set Combo port media type. - */ -extern rtk_api_ret_t rtk_port_phyComboPortMedia_get(rtk_port_t port, rtk_port_media_t *pMedia); - -/* Function Name: - * rtk_port_rtctEnable_set - * Description: - * Enable RTCT test - * Input: - * pPortmask - Port mask of RTCT enabled port - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * The API can enable RTCT Test - */ -extern rtk_api_ret_t rtk_port_rtctEnable_set(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_port_rtctDisable_set - * Description: - * Disable RTCT test - * Input: - * pPortmask - Port mask of RTCT disabled port - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * The API can disable RTCT Test - */ -rtk_api_ret_t rtk_port_rtctDisable_set(rtk_portmask_t *pPortmask); - - -/* Function Name: - * rtk_port_rtctResult_get - * Description: - * Get the result of RTCT test - * Input: - * port - Port ID - * Output: - * pRtctResult - The result of RTCT result - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_PHY_RTCT_NOT_FINISH - Testing does not finish. - * Note: - * The API can get RTCT test result. - * RTCT test may takes 4.8 seconds to finish its test at most. - * Thus, if this API return RT_ERR_PHY_RTCT_NOT_FINISH or - * other error code, the result can not be referenced and - * user should call this API again until this API returns - * a RT_ERR_OK. - * The result is stored at pRtctResult->ge_result - * pRtctResult->linkType is unused. - * The unit of channel length is 2.5cm. Ex. 300 means 300 * 2.5 = 750cm = 7.5M - */ -extern rtk_api_ret_t rtk_port_rtctResult_get(rtk_port_t port, rtk_rtctResult_t *pRtctResult); - -/* Function Name: - * rtk_port_sds_reset - * Description: - * Reset Serdes - * Input: - * port - Port ID - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can reset Serdes - */ -extern rtk_api_ret_t rtk_port_sds_reset(rtk_port_t port); - -/* Function Name: - * rtk_port_sgmiiLinkStatus_get - * Description: - * Get SGMII status - * Input: - * port - Port ID - * Output: - * pSignalDetect - Signal detect - * pSync - Sync - * pLink - Link - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can reset Serdes - */ -extern rtk_api_ret_t rtk_port_sgmiiLinkStatus_get(rtk_port_t port, rtk_data_t *pSignalDetect, rtk_data_t *pSync, rtk_port_linkStatus_t *pLink); - -/* Function Name: - * rtk_port_sgmiiNway_set - * Description: - * Configure SGMII/HSGMII port Nway state - * Input: - * port - Port ID - * state - Nway state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API configure SGMII/HSGMII port Nway state - */ -extern rtk_api_ret_t rtk_port_sgmiiNway_set(rtk_port_t port, rtk_enable_t state); - -/* Function Name: - * rtk_port_sgmiiNway_get - * Description: - * Get SGMII/HSGMII port Nway state - * Input: - * port - Port ID - * Output: - * pState - Nway state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can get SGMII/HSGMII port Nway state - */ -extern rtk_api_ret_t rtk_port_sgmiiNway_get(rtk_port_t port, rtk_enable_t *pState); - -#endif /* __RTK_API_PORT_H__ */ - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/ptp.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/ptp.h deleted file mode 100644 index 6c4aca5a58..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/ptp.h +++ /dev/null @@ -1,511 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes time module high-layer API defination - * - */ - -#ifndef __RTK_API_PTP_H__ -#define __RTK_API_PTP_H__ - -/* - * Symbol Definition - */ -#define RTK_MAX_NUM_OF_NANO_SECOND 0x3B9AC9FF -#define RTK_PTP_INTR_MASK 0xFF -#define RTK_MAX_NUM_OF_TPID 0xFFFF - -/* Message Type */ -typedef enum rtk_ptp_msgType_e -{ - PTP_MSG_TYPE_TX_SYNC = 0, - PTP_MSG_TYPE_TX_DELAY_REQ, - PTP_MSG_TYPE_TX_PDELAY_REQ, - PTP_MSG_TYPE_TX_PDELAY_RESP, - PTP_MSG_TYPE_RX_SYNC, - PTP_MSG_TYPE_RX_DELAY_REQ, - PTP_MSG_TYPE_RX_PDELAY_REQ, - PTP_MSG_TYPE_RX_PDELAY_RESP, - PTP_MSG_TYPE_END -} rtk_ptp_msgType_t; - -typedef enum rtk_ptp_intType_e -{ - PTP_INT_TYPE_TX_SYNC = 0, - PTP_INT_TYPE_TX_DELAY_REQ, - PTP_INT_TYPE_TX_PDELAY_REQ, - PTP_INT_TYPE_TX_PDELAY_RESP, - PTP_INT_TYPE_RX_SYNC, - PTP_INT_TYPE_RX_DELAY_REQ, - PTP_INT_TYPE_RX_PDELAY_REQ, - PTP_INT_TYPE_RX_PDELAY_RESP, - PTP_INT_TYPE_ALL, - PTP_INT_TYPE_END -}rtk_ptp_intType_t; - -typedef enum rtk_ptp_sys_adjust_e -{ - SYS_ADJUST_PLUS = 0, - SYS_ADJUST_MINUS, - SYS_ADJUST_END -} rtk_ptp_sys_adjust_t; - - -/* Reference Time */ -typedef struct rtk_ptp_timeStamp_s -{ - rtk_uint32 sec; - rtk_uint32 nsec; -} rtk_ptp_timeStamp_t; - -typedef struct rtk_ptp_info_s -{ - rtk_uint32 sequenceId; - rtk_ptp_timeStamp_t timeStamp; -} rtk_ptp_info_t; - -typedef rtk_uint32 rtk_ptp_tpid_t; - -typedef rtk_uint32 rtk_ptp_intStatus_t; /* interrupt status mask */ - -/* - * Data Declaration - */ - -/* - * Function Declaration - */ -/* Function Name: - * rtk_time_init - * Description: - * PTP function initialization. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is used to initialize EEE status. - */ -extern rtk_api_ret_t rtk_ptp_init(void); - -/* Function Name: - * rtk_ptp_mac_set - * Description: - * Configure PTP mac address. - * Input: - * mac - mac address to parser PTP packets. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_mac_set(rtk_mac_t mac); - -/* Function Name: - * rtk_ptp_mac_get - * Description: - * Get PTP mac address. - * Input: - * None - * Output: - * pMac - mac address to parser PTP packets. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_mac_get(rtk_mac_t *pMac); - -/* Function Name: - * rtk_ptp_tpid_set - * Description: - * Configure PTP accepted outer & inner tag TPID. - * Input: - * outerId - Ether type of S-tag frame parsing in PTP ports. - * innerId - Ether type of C-tag frame parsing in PTP ports. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_tpid_set(rtk_ptp_tpid_t outerId, rtk_ptp_tpid_t innerId); - -/* Function Name: - * rtk_ptp_tpid_get - * Description: - * Get PTP accepted outer & inner tag TPID. - * Input: - * None - * Output: - * pOuterId - Ether type of S-tag frame parsing in PTP ports. - * pInnerId - Ether type of C-tag frame parsing in PTP ports. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_tpid_get(rtk_ptp_tpid_t *pOuterId, rtk_ptp_tpid_t *pInnerId); - -/* Function Name: - * rtk_ptp_refTime_set - * Description: - * Set the reference time of the specified device. - * Input: - * timeStamp - reference timestamp value - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - invalid input parameter - * Applicable: - * 8390, 8380 - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_refTime_set(rtk_ptp_timeStamp_t timeStamp); - -/* Function Name: - * rtk_ptp_refTime_get - * Description: - * Get the reference time of the specified device. - * Input: - * Output: - * pTimeStamp - pointer buffer of the reference time - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Applicable: - * 8390, 8380 - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_refTime_get(rtk_ptp_timeStamp_t *pTimeStamp); - -/* Function Name: - * rtk_ptp_refTimeAdjust_set - * Description: - * Adjust the reference time. - * Input: - * unit - unit id - * sign - significant - * timeStamp - reference timestamp value - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * sign=0 for positive adjustment, sign=1 for negative adjustment. - */ -extern rtk_api_ret_t rtk_ptp_refTimeAdjust_set(rtk_ptp_sys_adjust_t sign, rtk_ptp_timeStamp_t timeStamp); - -/* Function Name: - * rtk_ptp_refTimeEnable_set - * Description: - * Set the enable state of reference time of the specified device. - * Input: - * enable - status - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_refTimeEnable_set(rtk_enable_t enable); - -/* Function Name: - * rtk_ptp_refTimeEnable_get - * Description: - * Get the enable state of reference time of the specified device. - * Input: - * Output: - * pEnable - status - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Applicable: - * 8390, 8380 - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_refTimeEnable_get(rtk_enable_t *pEnable); - -/* Function Name: - * rtk_ptp_portEnable_set - * Description: - * Set PTP status of the specified port. - * Input: - * port - port id - * enable - status - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_portEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_ptp_portEnable_get - * Description: - * Get PTP status of the specified port. - * Input: - * port - port id - * Output: - * pEnable - status - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_portEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_ptp_portTimestamp_get - * Description: - * Get PTP timstamp according to the PTP identifier on the dedicated port from the specified device. - * Input: - * unit - unit id - * port - port id - * type - PTP message type - * Output: - * pInfo - pointer buffer of sequence ID and timestamp - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Applicable: - * 8390, 8380 - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_portTimestamp_get( rtk_port_t port, rtk_ptp_msgType_t type, rtk_ptp_info_t *pInfo); - -/* Function Name: - * rtk_ptp_intControl_set - * Description: - * Set PTP interrupt trigger status configuration. - * Input: - * type - Interrupt type. - * enable - Interrupt status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The API can set PTP interrupt status configuration. - * The interrupt trigger status is shown in the following: - * PTP_INT_TYPE_TX_SYNC = 0, - * PTP_INT_TYPE_TX_DELAY_REQ, - * PTP_INT_TYPE_TX_PDELAY_REQ, - * PTP_INT_TYPE_TX_PDELAY_RESP, - * PTP_INT_TYPE_RX_SYNC, - * PTP_INT_TYPE_RX_DELAY_REQ, - * PTP_INT_TYPE_RX_PDELAY_REQ, - * PTP_INT_TYPE_RX_PDELAY_RESP, - * PTP_INT_TYPE_ALL, - */ -extern rtk_api_ret_t rtk_ptp_intControl_set(rtk_ptp_intType_t type, rtk_enable_t enable); - -/* Function Name: - * rtk_ptp_intControl_get - * Description: - * Get PTP interrupt trigger status configuration. - * Input: - * type - Interrupt type. - * Output: - * pEnable - Interrupt status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get interrupt status configuration. - * The interrupt trigger status is shown in the following: - * PTP_INT_TYPE_TX_SYNC = 0, - * PTP_INT_TYPE_TX_DELAY_REQ, - * PTP_INT_TYPE_TX_PDELAY_REQ, - * PTP_INT_TYPE_TX_PDELAY_RESP, - * PTP_INT_TYPE_RX_SYNC, - * PTP_INT_TYPE_RX_DELAY_REQ, - * PTP_INT_TYPE_RX_PDELAY_REQ, - * PTP_INT_TYPE_RX_PDELAY_RESP, - */ -extern rtk_api_ret_t rtk_ptp_intControl_get(rtk_ptp_intType_t type, rtk_enable_t *pEnable); - - -/* Function Name: - * rtk_ptp_intStatus_get - * Description: - * Get PTP port interrupt trigger status. - * Input: - * port - physical port - * Output: - * pStatusMask - Interrupt status bit mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get interrupt trigger status when interrupt happened. - * The interrupt trigger status is shown in the following: - * - PORT 0 INT (value[0] (Bit0)) - * - PORT 1 INT (value[0] (Bit1)) - * - PORT 2 INT (value[0] (Bit2)) - * - PORT 3 INT (value[0] (Bit3)) - * - PORT 4 INT (value[0] (Bit4)) - - * - */ -extern rtk_api_ret_t rtk_ptp_intStatus_get(rtk_ptp_intStatus_t *pStatusMask); - -/* Function Name: - * rtk_ptp_portIntStatus_set - * Description: - * Set PTP port interrupt trigger status to clean. - * Input: - * port - physical port - * statusMask - Interrupt status bit mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can clean interrupt trigger status when interrupt happened. - * The interrupt trigger status is shown in the following: - * - PTP_INT_TYPE_TX_SYNC (value[0] (Bit0)) - * - PTP_INT_TYPE_TX_DELAY_REQ (value[0] (Bit1)) - * - PTP_INT_TYPE_TX_PDELAY_REQ (value[0] (Bit2)) - * - PTP_INT_TYPE_TX_PDELAY_RESP (value[0] (Bit3)) - * - PTP_INT_TYPE_RX_SYNC (value[0] (Bit4)) - * - PTP_INT_TYPE_RX_DELAY_REQ (value[0] (Bit5)) - * - PTP_INT_TYPE_RX_PDELAY_REQ (value[0] (Bit6)) - * - PTP_INT_TYPE_RX_PDELAY_RESP (value[0] (Bit7)) - * The status will be cleared after execute this API. - */ -extern rtk_api_ret_t rtk_ptp_portIntStatus_set(rtk_port_t port, rtk_ptp_intStatus_t statusMask); - -/* Function Name: - * rtk_ptp_portIntStatus_get - * Description: - * Get PTP port interrupt trigger status. - * Input: - * port - physical port - * Output: - * pStatusMask - Interrupt status bit mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get interrupt trigger status when interrupt happened. - * The interrupt trigger status is shown in the following: - * - PTP_INT_TYPE_TX_SYNC (value[0] (Bit0)) - * - PTP_INT_TYPE_TX_DELAY_REQ (value[0] (Bit1)) - * - PTP_INT_TYPE_TX_PDELAY_REQ (value[0] (Bit2)) - * - PTP_INT_TYPE_TX_PDELAY_RESP (value[0] (Bit3)) - * - PTP_INT_TYPE_RX_SYNC (value[0] (Bit4)) - * - PTP_INT_TYPE_RX_DELAY_REQ (value[0] (Bit5)) - * - PTP_INT_TYPE_RX_PDELAY_REQ (value[0] (Bit6)) - * - PTP_INT_TYPE_RX_PDELAY_RESP (value[0] (Bit7)) - * - */ -extern rtk_api_ret_t rtk_ptp_portIntStatus_get(rtk_port_t port, rtk_ptp_intStatus_t *pStatusMask); - -/* Function Name: - * rtk_ptp_portPtpTrap_set - * Description: - * Set PTP packet trap of the specified port. - * Input: - * port - port id - * enable - status - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_portTrap_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_ptp_portPtpEnable_get - * Description: - * Get PTP packet trap of the specified port. - * Input: - * port - port id - * Output: - * pEnable - status - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -extern rtk_api_ret_t rtk_ptp_portTrap_get(rtk_port_t port, rtk_enable_t *pEnable); - -#endif /* __RTK_API_PTP_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/qos.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/qos.h deleted file mode 100644 index 4be417486f..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/qos.h +++ /dev/null @@ -1,781 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes QoS module high-layer API defination - * - */ - -#ifndef __RTK_API_QOS_H__ -#define __RTK_API_QOS_H__ - -/* - * Data Type Declaration - */ -#define QOS_DEFAULT_TICK_PERIOD (19-1) -#define QOS_DEFAULT_BYTE_PER_TOKEN 34 -#define QOS_DEFAULT_LK_THRESHOLD (34*3) /* Why use 0x400? */ - - -#define QOS_DEFAULT_INGRESS_BANDWIDTH 0x3FFF /* 0x3FFF => unlimit */ -#define QOS_DEFAULT_EGRESS_BANDWIDTH 0x3D08 /*( 0x3D08 + 1) * 64Kbps => 1Gbps*/ -#define QOS_DEFAULT_PREIFP 1 -#define QOS_DEFAULT_PACKET_USED_PAGES_FC 0x60 -#define QOS_DEFAULT_PACKET_USED_FC_EN 0 -#define QOS_DEFAULT_QUEUE_BASED_FC_EN 1 - -#define QOS_DEFAULT_PRIORITY_SELECT_PORT 8 -#define QOS_DEFAULT_PRIORITY_SELECT_1Q 0 -#define QOS_DEFAULT_PRIORITY_SELECT_ACL 0 -#define QOS_DEFAULT_PRIORITY_SELECT_DSCP 0 - -#define QOS_DEFAULT_DSCP_MAPPING_PRIORITY 0 - -#define QOS_DEFAULT_1Q_REMARKING_ABILITY 0 -#define QOS_DEFAULT_DSCP_REMARKING_ABILITY 0 -#define QOS_DEFAULT_QUEUE_GAP 20 -#define QOS_DEFAULT_QUEUE_NO_MAX 6 -#define QOS_DEFAULT_AVERAGE_PACKET_RATE 0x3FFF -#define QOS_DEFAULT_BURST_SIZE_IN_APR 0x3F -#define QOS_DEFAULT_PEAK_PACKET_RATE 2 -#define QOS_DEFAULT_SCHEDULER_ABILITY_APR 1 /*disable*/ -#define QOS_DEFAULT_SCHEDULER_ABILITY_PPR 1 /*disable*/ -#define QOS_DEFAULT_SCHEDULER_ABILITY_WFQ 1 /*disable*/ - -#define QOS_WEIGHT_MAX 127 - -#define RTK_MAX_NUM_OF_PRIORITY 8 -#define RTK_MAX_NUM_OF_QUEUE 8 - -#define RTK_PRIMAX 7 -#define RTK_QIDMAX 7 -#define RTK_DSCPMAX 63 - - -/* enum Priority Selection Index */ -typedef enum rtk_qos_priDecTbl_e -{ - PRIDECTBL_IDX0 = 0, - PRIDECTBL_IDX1, - PRIDECTBL_END, -}rtk_qos_priDecTbl_t; - - -/* Types of 802.1p remarking source */ -typedef enum rtk_qos_1pRmkSrc_e -{ - DOT1P_RMK_SRC_USER_PRI, - DOT1P_RMK_SRC_TAG_PRI, - DOT1P_RMK_SRC_END -} rtk_qos_1pRmkSrc_t; - - -/* Types of DSCP remarking source */ -typedef enum rtk_qos_dscpRmkSrc_e -{ - DSCP_RMK_SRC_INT_PRI, - DSCP_RMK_SRC_DSCP, - DSCP_RMK_SRC_USER_PRI, - DSCP_RMK_SRC_END -} rtk_qos_dscpRmkSrc_t; - - - - -typedef struct rtk_priority_select_s -{ - rtk_uint32 port_pri; - rtk_uint32 dot1q_pri; - rtk_uint32 acl_pri; - rtk_uint32 dscp_pri; - rtk_uint32 cvlan_pri; - rtk_uint32 svlan_pri; - rtk_uint32 dmac_pri; - rtk_uint32 smac_pri; -} rtk_priority_select_t; - -typedef struct rtk_qos_pri2queue_s -{ - rtk_uint32 pri2queue[RTK_MAX_NUM_OF_PRIORITY]; -} rtk_qos_pri2queue_t; - -typedef struct rtk_qos_queue_weights_s -{ - rtk_uint32 weights[RTK_MAX_NUM_OF_QUEUE]; -} rtk_qos_queue_weights_t; - -typedef enum rtk_qos_scheduling_type_e -{ - WFQ = 0, /* Weighted-Fair-Queue */ - WRR, /* Weighted-Round-Robin */ - SCHEDULING_TYPE_END -} rtk_qos_scheduling_type_t; - -typedef rtk_uint32 rtk_queue_num_t; /* queue number*/ - -/* Function Name: - * rtk_qos_init - * Description: - * Configure Qos default settings with queue number assigment to each port. - * Input: - * queueNum - Queue number of each port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QUEUE_NUM - Invalid queue number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API will initialize related Qos setting with queue number assigment. - * The queue number is from 1 to 8. - */ -extern rtk_api_ret_t rtk_qos_init(rtk_queue_num_t queueNum); - -/* Function Name: - * rtk_qos_priSel_set - * Description: - * Configure the priority order among different priority mechanism. - * Input: - * index - Priority decision table index (0~1) - * pPriDec - Priority assign for port, dscp, 802.1p, cvlan, svlan, acl based priority decision. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_SEL_PRI_SOURCE - Invalid priority decision source parameter. - * Note: - * ASIC will follow user priority setting of mechanisms to select mapped queue priority for receiving frame. - * If two priority mechanisms are the same, the ASIC will chose the highest priority from mechanisms to - * assign queue priority to receiving frame. - * The priority sources are: - * - PRIDEC_PORT - * - PRIDEC_ACL - * - PRIDEC_DSCP - * - PRIDEC_1Q - * - PRIDEC_1AD - * - PRIDEC_CVLAN - * - PRIDEC_DA - * - PRIDEC_SA - */ -extern rtk_api_ret_t rtk_qos_priSel_set(rtk_qos_priDecTbl_t index, rtk_priority_select_t *pPriDec); - - -/* Function Name: - * rtk_qos_priSel_get - * Description: - * Get the priority order configuration among different priority mechanism. - * Input: - * index - Priority decision table index (0~1) - * Output: - * pPriDec - Priority assign for port, dscp, 802.1p, cvlan, svlan, acl based priority decision . - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * ASIC will follow user priority setting of mechanisms to select mapped queue priority for receiving frame. - * If two priority mechanisms are the same, the ASIC will chose the highest priority from mechanisms to - * assign queue priority to receiving frame. - * The priority sources are: - * - PRIDEC_PORT, - * - PRIDEC_ACL, - * - PRIDEC_DSCP, - * - PRIDEC_1Q, - * - PRIDEC_1AD, - * - PRIDEC_CVLAN, - * - PRIDEC_DA, - * - PRIDEC_SA, - */ -extern rtk_api_ret_t rtk_qos_priSel_get(rtk_qos_priDecTbl_t index, rtk_priority_select_t *pPriDec); - -/* Function Name: - * rtk_qos_1pPriRemap_set - * Description: - * Configure 1Q priorities mapping to internal absolute priority. - * Input: - * dot1p_pri - 802.1p priority value. - * int_pri - internal priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of 802.1Q assignment for internal asic priority, and it is used for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_qos_1pPriRemap_set(rtk_pri_t dot1p_pri, rtk_pri_t int_pri); - -/* Function Name: - * rtk_qos_1pPriRemap_get - * Description: - * Get 1Q priorities mapping to internal absolute priority. - * Input: - * dot1p_pri - 802.1p priority value . - * Output: - * pInt_pri - internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_PRIORITY - Invalid priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of 802.1Q assigment for internal asic priority, and it is uesed for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_qos_1pPriRemap_get(rtk_pri_t dot1p_pri, rtk_pri_t *pInt_pri); - - -/* Function Name: - * rtk_qos_1pRemarkSrcSel_set - * Description: - * Set remarking source of 802.1p remarking. - * Input: - * type - remarking source - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - - * Note: - * The API can configure 802.1p remark functionality to map original 802.1p value or internal - * priority to TX DSCP value. - */ -extern rtk_api_ret_t rtk_qos_1pRemarkSrcSel_set(rtk_qos_1pRmkSrc_t type); - -/* Function Name: - * rtk_qos_1pRemarkSrcSel_get - * Description: - * Get remarking source of 802.1p remarking. - * Input: - * none - * Output: - * pType - remarking source - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - - * Note: - * None - */ -extern rtk_api_ret_t rtk_qos_1pRemarkSrcSel_get(rtk_qos_1pRmkSrc_t *pType); - -/* Function Name: - * rtk_qos_dscpPriRemap_set - * Description: - * Map dscp value to internal priority. - * Input: - * dscp - Dscp value of receiving frame - * int_pri - internal priority value . - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The Differentiated Service Code Point is a selector for router's per-hop behaviors. As a selector, there is no implication that a numerically - * greater DSCP implies a better network service. As can be seen, the DSCP totally overlaps the old precedence field of TOS. So if values of - * DSCP are carefully chosen then backward compatibility can be achieved. - */ -extern rtk_api_ret_t rtk_qos_dscpPriRemap_set(rtk_dscp_t dscp, rtk_pri_t int_pri); - -/* Function Name: - * rtk_qos_dscpPriRemap_get - * Description: - * Get dscp value to internal priority. - * Input: - * dscp - Dscp value of receiving frame - * Output: - * pInt_pri - internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value. - * Note: - * The Differentiated Service Code Point is a selector for router's per-hop behaviors. As a selector, there is no implication that a numerically - * greater DSCP implies a better network service. As can be seen, the DSCP totally overlaps the old precedence field of TOS. So if values of - * DSCP are carefully chosen then backward compatibility can be achieved. - */ -extern rtk_api_ret_t rtk_qos_dscpPriRemap_get(rtk_dscp_t dscp, rtk_pri_t *pInt_pri); - -/* Function Name: - * rtk_qos_portPri_set - * Description: - * Configure priority usage to each port. - * Input: - * port - Port id. - * int_pri - internal priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_SEL_PORT_PRI - Invalid port priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can set priority of port assignments for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_qos_portPri_set(rtk_port_t port, rtk_pri_t int_pri) ; - -/* Function Name: - * rtk_qos_portPri_get - * Description: - * Get priority usage to each port. - * Input: - * port - Port id. - * Output: - * pInt_pri - internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get priority of port assignments for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_qos_portPri_get(rtk_port_t port, rtk_pri_t *pInt_pri) ; - -/* Function Name: - * rtk_qos_queueNum_set - * Description: - * Set output queue number for each port. - * Input: - * port - Port id. - * index - Mapping queue number (1~8) - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QUEUE_NUM - Invalid queue number. - * Note: - * The API can set the output queue number of the specified port. The queue number is from 1 to 8. - */ -extern rtk_api_ret_t rtk_qos_queueNum_set(rtk_port_t port, rtk_queue_num_t queue_num); - -/* Function Name: - * rtk_qos_queueNum_get - * Description: - * Get output queue number. - * Input: - * port - Port id. - * Output: - * pQueue_num - Mapping queue number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API will return the output queue number of the specified port. The queue number is from 1 to 8. - */ -extern rtk_api_ret_t rtk_qos_queueNum_get(rtk_port_t port, rtk_queue_num_t *pQueue_num); - -/* Function Name: - * rtk_qos_priMap_set - * Description: - * Set output queue number for each port. - * Input: - * queue_num - Queue number usage. - * pPri2qid - Priority mapping to queue ID. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QUEUE_NUM - Invalid queue number. - * RT_ERR_QUEUE_ID - Invalid queue id. - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * ASIC supports priority mapping to queue with different queue number from 1 to 8. - * For different queue numbers usage, ASIC supports different internal available queue IDs. - */ -extern rtk_api_ret_t rtk_qos_priMap_set(rtk_queue_num_t queue_num, rtk_qos_pri2queue_t *pPri2qid); - - -/* Function Name: - * rtk_qos_priMap_get - * Description: - * Get priority to queue ID mapping table parameters. - * Input: - * queue_num - Queue number usage. - * Output: - * pPri2qid - Priority mapping to queue ID. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QUEUE_NUM - Invalid queue number. - * Note: - * The API can return the mapping queue id of the specified priority and queue number. - * The queue number is from 1 to 8. - */ -extern rtk_api_ret_t rtk_qos_priMap_get(rtk_queue_num_t queue_num, rtk_qos_pri2queue_t *pPri2qid); - -/* Function Name: - * rtk_qos_schedulingQueue_set - * Description: - * Set weight and type of queues in dedicated port. - * Input: - * port - Port id. - * pQweights - The array of weights for WRR/WFQ queue (0 for STRICT_PRIORITY queue). - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_QUEUE_WEIGHT - Invalid queue weight. - * Note: - * The API can set weight and type, strict priority or weight fair queue (WFQ) for - * dedicated port for using queues. If queue id is not included in queue usage, - * then its type and weight setting in dummy for setting. There are priorities - * as queue id in strict queues. It means strict queue id 5 carrying higher priority - * than strict queue id 4. The WFQ queue weight is from 1 to 128, and weight 0 is - * for strict priority queue type. - */ -extern rtk_api_ret_t rtk_qos_schedulingQueue_set(rtk_port_t port, rtk_qos_queue_weights_t *pQweights); - -/* Function Name: - * rtk_qos_schedulingQueue_get - * Description: - * Get weight and type of queues in dedicated port. - * Input: - * port - Port id. - * Output: - * pQweights - The array of weights for WRR/WFQ queue (0 for STRICT_PRIORITY queue). - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get weight and type, strict priority or weight fair queue (WFQ) for dedicated port for using queues. - * The WFQ queue weight is from 1 to 128, and weight 0 is for strict priority queue type. - */ -extern rtk_api_ret_t rtk_qos_schedulingQueue_get(rtk_port_t port, rtk_qos_queue_weights_t *pQweights); - -/* Function Name: - * rtk_qos_1pRemarkEnable_set - * Description: - * Set 1p Remarking state - * Input: - * port - Port id. - * enable - State of per-port 1p Remarking - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable parameter. - * Note: - * The API can enable or disable 802.1p remarking ability for whole system. - * The status of 802.1p remark: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_qos_1pRemarkEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_qos_1pRemarkEnable_get - * Description: - * Get 802.1p remarking ability. - * Input: - * port - Port id. - * Output: - * pEnable - Status of 802.1p remark. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1p remarking ability. - * The status of 802.1p remark: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_qos_1pRemarkEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_qos_1pRemark_set - * Description: - * Set 802.1p remarking parameter. - * Input: - * int_pri - Internal priority value. - * dot1p_pri - 802.1p priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can set 802.1p parameters source priority and new priority. - */ -extern rtk_api_ret_t rtk_qos_1pRemark_set(rtk_pri_t int_pri, rtk_pri_t dot1p_pri); - -/* Function Name: - * rtk_qos_1pRemark_get - * Description: - * Get 802.1p remarking parameter. - * Input: - * int_pri - Internal priority value. - * Output: - * pDot1p_pri - 802.1p priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can get 802.1p remarking parameters. It would return new priority of ingress priority. - */ -extern rtk_api_ret_t rtk_qos_1pRemark_get(rtk_pri_t int_pri, rtk_pri_t *pDot1p_pri); - -/* Function Name: - * rtk_qos_dscpRemarkEnable_set - * Description: - * Set DSCP remarking ability. - * Input: - * port - Port id. - * enable - status of DSCP remark. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * RT_ERR_ENABLE - Invalid enable parameter. - * Note: - * The API can enable or disable DSCP remarking ability for whole system. - * The status of DSCP remark: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_qos_dscpRemarkEnable_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_qos_dscpRemarkEnable_get - * Description: - * Get DSCP remarking ability. - * Input: - * port - Port id. - * Output: - * pEnable - status of DSCP remarking. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get DSCP remarking ability. - * The status of DSCP remark: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_qos_dscpRemarkEnable_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_qos_dscpRemark_set - * Description: - * Set DSCP remarking parameter. - * Input: - * int_pri - Internal priority value. - * dscp - DSCP value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value. - * Note: - * The API can set DSCP value and mapping priority. - */ -extern rtk_api_ret_t rtk_qos_dscpRemark_set(rtk_pri_t int_pri, rtk_dscp_t dscp); - -/* Function Name: - * rtk_qos_dscpRemark_get - * Description: - * Get DSCP remarking parameter. - * Input: - * int_pri - Internal priority value. - * Output: - * Dscp - DSCP value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can get DSCP parameters. It would return DSCP value for mapping priority. - */ -extern rtk_api_ret_t rtk_qos_dscpRemark_get(rtk_pri_t int_pri, rtk_dscp_t *pDscp); - -/* Function Name: - * rtk_qos_dscpRemarkSrcSel_set - * Description: - * Set remarking source of DSCP remarking. - * Input: - * type - remarking source - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - - * Note: - * The API can configure DSCP remark functionality to map original DSCP value or internal - * priority to TX DSCP value. - */ -extern rtk_api_ret_t rtk_qos_dscpRemarkSrcSel_set(rtk_qos_dscpRmkSrc_t type); - - -/* Function Name: - * rtk_qos_dcpRemarkSrcSel_get - * Description: - * Get remarking source of DSCP remarking. - * Input: - * none - * Output: - * pType - remarking source - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - - * Note: - * None - */ -extern rtk_api_ret_t rtk_qos_dscpRemarkSrcSel_get(rtk_qos_dscpRmkSrc_t *pType); - - -/* Function Name: - * rtk_qos_dscpRemark2Dscp_set - * Description: - * Set DSCP to remarked DSCP mapping. - * Input: - * dscp - DSCP value - * rmkDscp - remarked DSCP value - * Output: - * None. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_DSCP_VALUE - Invalid dscp value - * Note: - * dscp parameter can be DSCP value or internal priority according to configuration of API - * dal_apollomp_qos_dscpRemarkSrcSel_set(), because DSCP remark functionality can map original DSCP - * value or internal priority to TX DSCP value. - */ -extern rtk_api_ret_t rtk_qos_dscpRemark2Dscp_set(rtk_dscp_t dscp, rtk_dscp_t rmkDscp); - -/* Function Name: - * rtk_qos_dscpRemark2Dscp_get - * Description: - * Get DSCP to remarked DSCP mapping. - * Input: - * dscp - DSCP value - * Output: - * pDscp - remarked DSCP value - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_DSCP_VALUE - Invalid dscp value - * RT_ERR_NULL_POINTER - NULL pointer - * Note: - * None. - */ -extern rtk_api_ret_t rtk_qos_dscpRemark2Dscp_get(rtk_dscp_t dscp, rtk_dscp_t *pDscp); - -/* Function Name: - * rtk_qos_portPriSelIndex_set - * Description: - * Configure priority decision index to each port. - * Input: - * port - Port id. - * index - priority decision index. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENTRY_INDEX - Invalid entry index. - * Note: - * The API can set priority of port assignments for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_qos_portPriSelIndex_set(rtk_port_t port, rtk_qos_priDecTbl_t index); - -/* Function Name: - * rtk_qos_portPriSelIndex_get - * Description: - * Get priority decision index from each port. - * Input: - * port - Port id. - * Output: - * pIndex - priority decision index. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get priority of port assignments for queue usage and packet scheduling. - */ -extern rtk_api_ret_t rtk_qos_portPriSelIndex_get(rtk_port_t port, rtk_qos_priDecTbl_t *pIndex); - -#endif /* __RTK_API_QOS_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rate.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rate.h deleted file mode 100644 index 231ed01bb0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rate.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes rate module high-layer API defination - * - */ - -#ifndef __RTK_API_RATE_H__ -#define __RTK_API_RATE_H__ - -/* - * Include Files - */ -//#include - -/* - * Data Type Declaration - */ -#define RTK_MAX_METER_ID (rtk_switch_maxMeterId_get()) -#define RTK_METER_NUM (RTK_MAX_METER_ID + 1) - -typedef enum rtk_meter_type_e{ - METER_TYPE_KBPS = 0, /* Kbps */ - METER_TYPE_PPS, /* Packet per second */ - METER_TYPE_END -}rtk_meter_type_t; - - -/* - * Function Declaration - */ - - /* Rate */ -/* Function Name: - * rtk_rate_shareMeter_set - * Description: - * Set meter configuration - * Input: - * index - shared meter index - * type - shared meter type - * rate - rate of share meter - * ifg_include - include IFG or not, ENABLE:include DISABLE:exclude - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * RT_ERR_RATE - Invalid rate - * RT_ERR_INPUT - Invalid input parameters - * Note: - * The API can set shared meter rate and ifg include for each meter. - * The rate unit is 1 kbps and the range is from 8k to 1048568k if type is METER_TYPE_KBPS and - * the granularity of rate is 8 kbps. - * The rate unit is packets per second and the range is 1 ~ 0x1FFF if type is METER_TYPE_PPS. - * The ifg_include parameter is used - * for rate calculation with/without inter-frame-gap and preamble. - */ -rtk_api_ret_t rtk_rate_shareMeter_set(rtk_meter_id_t index, rtk_meter_type_t type, rtk_rate_t rate, rtk_enable_t ifg_include); - -/* Function Name: - * rtk_rate_shareMeter_get - * Description: - * Get meter configuration - * Input: - * index - shared meter index - * Output: - * pType - Meter Type - * pRate - pointer of rate of share meter - * pIfg_include - include IFG or not, ENABLE:include DISABLE:exclude - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * - */ -rtk_api_ret_t rtk_rate_shareMeter_get(rtk_meter_id_t index, rtk_meter_type_t *pType, rtk_rate_t *pRate, rtk_enable_t *pIfg_include); - -/* Function Name: - * rtk_rate_shareMeterBucket_set - * Description: - * Set meter Bucket Size - * Input: - * index - shared meter index - * bucket_size - Bucket Size - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_INPUT - Error Input - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * The API can set shared meter bucket size. - */ -extern rtk_api_ret_t rtk_rate_shareMeterBucket_set(rtk_meter_id_t index, rtk_uint32 bucket_size); - -/* Function Name: - * rtk_rate_shareMeterBucket_get - * Description: - * Get meter Bucket Size - * Input: - * index - shared meter index - * Output: - * pBucket_size - Bucket Size - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * The API can get shared meter bucket size. - */ -extern rtk_api_ret_t rtk_rate_shareMeterBucket_get(rtk_meter_id_t index, rtk_uint32 *pBucket_size); - -/* Function Name: - * rtk_rate_igrBandwidthCtrlRate_set - * Description: - * Set port ingress bandwidth control - * Input: - * port - Port id - * rate - Rate of share meter - * ifg_include - include IFG or not, ENABLE:include DISABLE:exclude - * fc_enable - enable flow control or not, ENABLE:use flow control DISABLE:drop - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid IFG parameter. - * RT_ERR_INBW_RATE - Invalid ingress rate parameter. - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -extern rtk_api_ret_t rtk_rate_igrBandwidthCtrlRate_set( rtk_port_t port, rtk_rate_t rate, rtk_enable_t ifg_include, rtk_enable_t fc_enable); - -/* Function Name: - * rtk_rate_igrBandwidthCtrlRate_get - * Description: - * Get port ingress bandwidth control - * Input: - * port - Port id - * Output: - * pRate - Rate of share meter - * pIfg_include - Rate's calculation including IFG, ENABLE:include DISABLE:exclude - * pFc_enable - enable flow control or not, ENABLE:use flow control DISABLE:drop - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -extern rtk_api_ret_t rtk_rate_igrBandwidthCtrlRate_get(rtk_port_t port, rtk_rate_t *pRate, rtk_enable_t *pIfg_include, rtk_enable_t *pFc_enable); - -/* Function Name: - * rtk_rate_egrBandwidthCtrlRate_set - * Description: - * Set port egress bandwidth control - * Input: - * port - Port id - * rate - Rate of egress bandwidth - * ifg_include - include IFG or not, ENABLE:include DISABLE:exclude - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QOS_EBW_RATE - Invalid egress bandwidth/rate - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -extern rtk_api_ret_t rtk_rate_egrBandwidthCtrlRate_set(rtk_port_t port, rtk_rate_t rate, rtk_enable_t ifg_includ); - -/* Function Name: - * rtk_rate_egrBandwidthCtrlRate_get - * Description: - * Get port egress bandwidth control - * Input: - * port - Port id - * Output: - * pRate - Rate of egress bandwidth - * pIfg_include - Rate's calculation including IFG, ENABLE:include DISABLE:exclude - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -extern rtk_api_ret_t rtk_rate_egrBandwidthCtrlRate_get(rtk_port_t port, rtk_rate_t *pRate, rtk_enable_t *pIfg_include); - -/* Function Name: - * rtk_rate_egrQueueBwCtrlEnable_set - * Description: - * Set enable status of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * enable - enable status of egress queue bandwidth control - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -extern rtk_api_ret_t rtk_rate_egrQueueBwCtrlEnable_set(rtk_port_t port, rtk_qid_t queue, rtk_enable_t enable); - -/* Function Name: - * rtk_rate_egrQueueBwCtrlRate_get - * Description: - * Get rate of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * pIndex - shared meter index - * Output: - * pRate - pointer to rate of egress queue bandwidth control - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_FILTER_METER_ID - Invalid meter id - * Note: - * None. - */ -extern rtk_api_ret_t rtk_rate_egrQueueBwCtrlEnable_get(rtk_port_t port, rtk_qid_t queue, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_rate_egrQueueBwCtrlRate_set - * Description: - * Set rate of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * index - shared meter index - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_FILTER_METER_ID - Invalid meter id - * Note: - * The actual rate control is set in shared meters. - * The unit of granularity is 8Kbps. - */ -extern rtk_api_ret_t rtk_rate_egrQueueBwCtrlRate_set(rtk_port_t port, rtk_qid_t queue, rtk_meter_id_t index); - -/* Function Name: - * rtk_rate_egrQueueBwCtrlRate_get - * Description: - * Get rate of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * pIndex - shared meter index - * Output: - * pRate - pointer to rate of egress queue bandwidth control - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_FILTER_METER_ID - Invalid meter id - * Note: - * The actual rate control is set in shared meters. - * The unit of granularity is 8Kbps. - */ -extern rtk_api_ret_t rtk_rate_egrQueueBwCtrlRate_get(rtk_port_t port, rtk_qid_t queue, rtk_meter_id_t *pIndex); - -#endif /* __RTK_API_RATE_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rldp.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rldp.h deleted file mode 100644 index 111de0c093..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rldp.h +++ /dev/null @@ -1,264 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : Declaration of RLDP and RLPP API - * - * Feature : The file have include the following module and sub-modules - * 1) RLDP and RLPP configuration and status - * - */ - - -#ifndef __RTK_RLDP_H__ -#define __RTK_RLDP_H__ - - -/* - * Include Files - */ - - -/* - * Symbol Definition - */ -typedef enum rtk_rldp_trigger_e -{ - RTK_RLDP_TRIGGER_SAMOVING = 0, - RTK_RLDP_TRIGGER_PERIOD, - RTK_RLDP_TRIGGER_END -} rtk_rldp_trigger_t; - -typedef enum rtk_rldp_cmpType_e -{ - RTK_RLDP_CMPTYPE_MAGIC = 0, /* Compare the RLDP with magic only */ - RTK_RLDP_CMPTYPE_MAGIC_ID, /* Compare the RLDP with both magic + ID */ - RTK_RLDP_CMPTYPE_END -} rtk_rldp_cmpType_t; - -typedef enum rtk_rldp_loopStatus_e -{ - RTK_RLDP_LOOPSTS_NONE = 0, - RTK_RLDP_LOOPSTS_LOOPING, - RTK_RLDP_LOOPSTS_END -} rtk_rldp_loopStatus_t; - -typedef enum rtk_rlpp_trapType_e -{ - RTK_RLPP_TRAPTYPE_NONE = 0, - RTK_RLPP_TRAPTYPE_CPU, - RTK_RLPP_TRAPTYPE_END -} rtk_rlpp_trapType_t; - -typedef struct rtk_rldp_config_s -{ - rtk_enable_t rldp_enable; - rtk_rldp_trigger_t trigger_mode; - rtk_mac_t magic; - rtk_rldp_cmpType_t compare_type; - rtk_uint32 interval_check; /* Checking interval for check state */ - rtk_uint32 num_check; /* Checking number for check state */ - rtk_uint32 interval_loop; /* Checking interval for loop state */ - rtk_uint32 num_loop; /* Checking number for loop state */ -} rtk_rldp_config_t; - -typedef struct rtk_rldp_portConfig_s -{ - rtk_enable_t tx_enable; -} rtk_rldp_portConfig_t; - -typedef struct rtk_rldp_status_s -{ - rtk_mac_t id; -} rtk_rldp_status_t; - -typedef struct rtk_rldp_portStatus_s -{ - rtk_rldp_loopStatus_t loop_status; - rtk_rldp_loopStatus_t loop_enter; - rtk_rldp_loopStatus_t loop_leave; -} rtk_rldp_portStatus_t; - -/* - * Data Declaration - */ - - -/* - * Macro Declaration - */ - -#define RTK_RLDP_INTERVAL_MAX 0xffff -#define RTK_RLDP_NUM_MAX 0xff - - -/* - * Function Declaration - */ - -/* Module Name : RLDP */ - - -/* Function Name: - * rtk_rldp_config_set - * Description: - * Set RLDP module configuration - * Input: - * pConfig - configuration structure of RLDP - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_config_set(rtk_rldp_config_t *pConfig); - - -/* Function Name: - * rtk_rldp_config_get - * Description: - * Get RLDP module configuration - * Input: - * None - * Output: - * pConfig - configuration structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_config_get(rtk_rldp_config_t *pConfig); - - -/* Function Name: - * rtk_rldp_portConfig_set - * Description: - * Set per port RLDP module configuration - * Input: - * port - port number to be configured - * pPortConfig - per port configuration structure of RLDP - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_portConfig_set(rtk_port_t port, rtk_rldp_portConfig_t *pPortConfig); - - -/* Function Name: - * rtk_rldp_portConfig_get - * Description: - * Get per port RLDP module configuration - * Input: - * port - port number to be get - * Output: - * pPortConfig - per port configuration structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_portConfig_get(rtk_port_t port, rtk_rldp_portConfig_t *pPortConfig); - - -/* Function Name: - * rtk_rldp_status_get - * Description: - * Get RLDP module status - * Input: - * None - * Output: - * pStatus - status structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_status_get(rtk_rldp_status_t *pStatus); - - -/* Function Name: - * rtk_rldp_portStatus_get - * Description: - * Get RLDP module status - * Input: - * port - port number to be get - * Output: - * pPortStatus - per port status structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_portStatus_get(rtk_port_t port, rtk_rldp_portStatus_t *pPortStatus); - - -/* Function Name: - * rtk_rldp_portStatus_clear - * Description: - * Clear RLDP module status - * Input: - * port - port number to be clear - * pPortStatus - per port status structure of RLDP - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * Clear operation effect loop_enter and loop_leave only, other field in - * the structure are don't care - */ -extern rtk_api_ret_t rtk_rldp_portStatus_set(rtk_port_t port, rtk_rldp_portStatus_t *pPortStatus); - - -/* Function Name: - * rtk_rldp_portLoopPair_get - * Description: - * Get RLDP port loop pairs - * Input: - * port - port number to be get - * Output: - * pPortmask - per port related loop ports - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -extern rtk_api_ret_t rtk_rldp_portLoopPair_get(rtk_port_t port, rtk_portmask_t *pPortmask); - -#endif /* __RTK_RLDP_H__ */ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_error.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_error.h deleted file mode 100644 index dc9c0bed35..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_error.h +++ /dev/null @@ -1,229 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : Definition the error number in the SDK. - * Feature : error definition - * - */ - -#ifndef __COMMON_RT_ERROR_H__ -#define __COMMON_RT_ERROR_H__ - -/* - * Include Files - */ - -/* - * Data Type Declaration - */ -typedef enum rt_error_code_e -{ - RT_ERR_FAILED = -1, /* General Error */ - - /* 0x0000xxxx for common error code */ - RT_ERR_OK = 0, /* 0x00000000, OK */ - RT_ERR_INPUT, /* 0x00000001, invalid input parameter */ - RT_ERR_UNIT_ID, /* 0x00000002, invalid unit id */ - RT_ERR_PORT_ID, /* 0x00000003, invalid port id */ - RT_ERR_PORT_MASK, /* 0x00000004, invalid port mask */ - RT_ERR_PORT_LINKDOWN, /* 0x00000005, link down port status */ - RT_ERR_ENTRY_INDEX, /* 0x00000006, invalid entry index */ - RT_ERR_NULL_POINTER, /* 0x00000007, input parameter is null pointer */ - RT_ERR_QUEUE_ID, /* 0x00000008, invalid queue id */ - RT_ERR_QUEUE_NUM, /* 0x00000009, invalid queue number */ - RT_ERR_BUSYWAIT_TIMEOUT, /* 0x0000000a, busy watting time out */ - RT_ERR_MAC, /* 0x0000000b, invalid mac address */ - RT_ERR_OUT_OF_RANGE, /* 0x0000000c, input parameter out of range */ - RT_ERR_CHIP_NOT_SUPPORTED, /* 0x0000000d, functions not supported by this chip model */ - RT_ERR_SMI, /* 0x0000000e, SMI error */ - RT_ERR_NOT_INIT, /* 0x0000000f, The module is not initial */ - RT_ERR_CHIP_NOT_FOUND, /* 0x00000010, The chip can not found */ - RT_ERR_NOT_ALLOWED, /* 0x00000011, actions not allowed by the function */ - RT_ERR_DRIVER_NOT_FOUND, /* 0x00000012, The driver can not found */ - RT_ERR_SEM_LOCK_FAILED, /* 0x00000013, Failed to lock semaphore */ - RT_ERR_SEM_UNLOCK_FAILED, /* 0x00000014, Failed to unlock semaphore */ - RT_ERR_ENABLE, /* 0x00000015, invalid enable parameter */ - RT_ERR_TBL_FULL, /* 0x00000016, input table full */ - - /* 0x0001xxxx for vlan */ - RT_ERR_VLAN_VID = 0x00010000, /* 0x00010000, invalid vid */ - RT_ERR_VLAN_PRIORITY, /* 0x00010001, invalid 1p priority */ - RT_ERR_VLAN_EMPTY_ENTRY, /* 0x00010002, emtpy entry of vlan table */ - RT_ERR_VLAN_ACCEPT_FRAME_TYPE, /* 0x00010003, invalid accept frame type */ - RT_ERR_VLAN_EXIST, /* 0x00010004, vlan is exist */ - RT_ERR_VLAN_ENTRY_NOT_FOUND, /* 0x00010005, specified vlan entry not found */ - RT_ERR_VLAN_PORT_MBR_EXIST, /* 0x00010006, member port exist in the specified vlan */ - RT_ERR_VLAN_PROTO_AND_PORT, /* 0x00010008, invalid protocol and port based vlan */ - - /* 0x0002xxxx for svlan */ - RT_ERR_SVLAN_ENTRY_INDEX = 0x00020000, /* 0x00020000, invalid svid entry no */ - RT_ERR_SVLAN_ETHER_TYPE, /* 0x00020001, invalid SVLAN ether type */ - RT_ERR_SVLAN_TABLE_FULL, /* 0x00020002, no empty entry in SVLAN table */ - RT_ERR_SVLAN_ENTRY_NOT_FOUND, /* 0x00020003, specified svlan entry not found */ - RT_ERR_SVLAN_EXIST, /* 0x00020004, SVLAN entry is exist */ - RT_ERR_SVLAN_VID, /* 0x00020005, invalid svid */ - - /* 0x0003xxxx for MSTP */ - RT_ERR_MSTI = 0x00030000, /* 0x00030000, invalid msti */ - RT_ERR_MSTP_STATE, /* 0x00030001, invalid spanning tree status */ - RT_ERR_MSTI_EXIST, /* 0x00030002, MSTI exist */ - RT_ERR_MSTI_NOT_EXIST, /* 0x00030003, MSTI not exist */ - - /* 0x0004xxxx for BUCKET */ - RT_ERR_TIMESLOT = 0x00040000, /* 0x00040000, invalid time slot */ - RT_ERR_TOKEN, /* 0x00040001, invalid token amount */ - RT_ERR_RATE, /* 0x00040002, invalid rate */ - RT_ERR_TICK, /* 0x00040003, invalid tick */ - - /* 0x0005xxxx for RMA */ - RT_ERR_RMA_ADDR = 0x00050000, /* 0x00050000, invalid rma mac address */ - RT_ERR_RMA_ACTION, /* 0x00050001, invalid rma action */ - - /* 0x0006xxxx for L2 */ - RT_ERR_L2_HASH_KEY = 0x00060000, /* 0x00060000, invalid L2 Hash key */ - RT_ERR_L2_HASH_INDEX, /* 0x00060001, invalid L2 Hash index */ - RT_ERR_L2_CAM_INDEX, /* 0x00060002, invalid L2 CAM index */ - RT_ERR_L2_ENRTYSEL, /* 0x00060003, invalid EntrySel */ - RT_ERR_L2_INDEXTABLE_INDEX, /* 0x00060004, invalid L2 index table(=portMask table) index */ - RT_ERR_LIMITED_L2ENTRY_NUM, /* 0x00060005, invalid limited L2 entry number */ - RT_ERR_L2_AGGREG_PORT, /* 0x00060006, this aggregated port is not the lowest physical - port of its aggregation group */ - RT_ERR_L2_FID, /* 0x00060007, invalid fid */ - RT_ERR_L2_VID, /* 0x00060008, invalid cvid */ - RT_ERR_L2_NO_EMPTY_ENTRY, /* 0x00060009, no empty entry in L2 table */ - RT_ERR_L2_ENTRY_NOTFOUND, /* 0x0006000a, specified entry not found */ - RT_ERR_L2_INDEXTBL_FULL, /* 0x0006000b, the L2 index table is full */ - RT_ERR_L2_INVALID_FLOWTYPE, /* 0x0006000c, invalid L2 flow type */ - RT_ERR_L2_L2UNI_PARAM, /* 0x0006000d, invalid L2 unicast parameter */ - RT_ERR_L2_L2MULTI_PARAM, /* 0x0006000e, invalid L2 multicast parameter */ - RT_ERR_L2_IPMULTI_PARAM, /* 0x0006000f, invalid L2 ip multicast parameter */ - RT_ERR_L2_PARTIAL_HASH_KEY, /* 0x00060010, invalid L2 partial Hash key */ - RT_ERR_L2_EMPTY_ENTRY, /* 0x00060011, the entry is empty(invalid) */ - RT_ERR_L2_FLUSH_TYPE, /* 0x00060012, the flush type is invalid */ - RT_ERR_L2_NO_CPU_PORT, /* 0x00060013, CPU port not exist */ - - /* 0x0007xxxx for FILTER (PIE) */ - RT_ERR_FILTER_BLOCKNUM = 0x00070000, /* 0x00070000, invalid block number */ - RT_ERR_FILTER_ENTRYIDX, /* 0x00070001, invalid entry index */ - RT_ERR_FILTER_CUTLINE, /* 0x00070002, invalid cutline value */ - RT_ERR_FILTER_FLOWTBLBLOCK, /* 0x00070003, block belongs to flow table */ - RT_ERR_FILTER_INACLBLOCK, /* 0x00070004, block belongs to ingress ACL */ - RT_ERR_FILTER_ACTION, /* 0x00070005, action doesn't consist to entry type */ - RT_ERR_FILTER_INACL_RULENUM, /* 0x00070006, invalid ACL rulenum */ - RT_ERR_FILTER_INACL_TYPE, /* 0x00070007, entry type isn't an ingress ACL rule */ - RT_ERR_FILTER_INACL_EXIST, /* 0x00070008, ACL entry is already exit */ - RT_ERR_FILTER_INACL_EMPTY, /* 0x00070009, ACL entry is empty */ - RT_ERR_FILTER_FLOWTBL_TYPE, /* 0x0007000a, entry type isn't an flow table rule */ - RT_ERR_FILTER_FLOWTBL_RULENUM, /* 0x0007000b, invalid flow table rulenum */ - RT_ERR_FILTER_FLOWTBL_EMPTY, /* 0x0007000c, flow table entry is empty */ - RT_ERR_FILTER_FLOWTBL_EXIST, /* 0x0007000d, flow table entry is already exist */ - RT_ERR_FILTER_METER_ID, /* 0x0007000e, invalid metering id */ - RT_ERR_FILTER_LOG_ID, /* 0x0007000f, invalid log id */ - RT_ERR_FILTER_INACL_NONE_BEGIN_IDX, /* 0x00070010, entry index is not starting index of a group of rules */ - RT_ERR_FILTER_INACL_ACT_NOT_SUPPORT, /* 0x00070011, action not support */ - RT_ERR_FILTER_INACL_RULE_NOT_SUPPORT, /* 0x00070012, rule not support */ - - /* 0x0008xxxx for ACL Rate Limit */ - RT_ERR_ACLRL_HTHR = 0x00080000, /* 0x00080000, invalid high threshold */ - RT_ERR_ACLRL_TIMESLOT, /* 0x00080001, invalid time slot */ - RT_ERR_ACLRL_TOKEN, /* 0x00080002, invalid token amount */ - RT_ERR_ACLRL_RATE, /* 0x00080003, invalid rate */ - - /* 0x0009xxxx for Link aggregation */ - RT_ERR_LA_CPUPORT = 0x00090000, /* 0x00090000, CPU port can not be aggregated port */ - RT_ERR_LA_TRUNK_ID, /* 0x00090001, invalid trunk id */ - RT_ERR_LA_PORTMASK, /* 0x00090002, invalid port mask */ - RT_ERR_LA_HASHMASK, /* 0x00090003, invalid hash mask */ - RT_ERR_LA_DUMB, /* 0x00090004, this API should be used in 802.1ad dumb mode */ - RT_ERR_LA_PORTNUM_DUMB, /* 0x00090005, it can only aggregate at most four ports when 802.1ad dumb mode */ - RT_ERR_LA_PORTNUM_NORMAL, /* 0x00090006, it can only aggregate at most eight ports when 802.1ad normal mode */ - RT_ERR_LA_MEMBER_OVERLAP, /* 0x00090007, the specified port mask is overlapped with other group */ - RT_ERR_LA_NOT_MEMBER_PORT, /* 0x00090008, the port is not a member port of the trunk */ - RT_ERR_LA_TRUNK_NOT_EXIST, /* 0x00090009, the trunk doesn't exist */ - - - /* 0x000axxxx for storm filter */ - RT_ERR_SFC_TICK_PERIOD = 0x000a0000, /* 0x000a0000, invalid SFC tick period */ - RT_ERR_SFC_UNKNOWN_GROUP, /* 0x000a0001, Unknown Storm filter group */ - - /* 0x000bxxxx for pattern match */ - RT_ERR_PM_MASK = 0x000b0000, /* 0x000b0000, invalid pattern length. Pattern length should be 8 */ - RT_ERR_PM_LENGTH, /* 0x000b0001, invalid pattern match mask, first byte must care */ - RT_ERR_PM_MODE, /* 0x000b0002, invalid pattern match mode */ - - /* 0x000cxxxx for input bandwidth control */ - RT_ERR_INBW_TICK_PERIOD = 0x000c0000, /* 0x000c0000, invalid tick period for input bandwidth control */ - RT_ERR_INBW_TOKEN_AMOUNT, /* 0x000c0001, invalid amount of token for input bandwidth control */ - RT_ERR_INBW_FCON_VALUE, /* 0x000c0002, invalid flow control ON threshold value for input bandwidth control */ - RT_ERR_INBW_FCOFF_VALUE, /* 0x000c0003, invalid flow control OFF threshold value for input bandwidth control */ - RT_ERR_INBW_FC_ALLOWANCE, /* 0x000c0004, invalid allowance of incomming packet for input bandwidth control */ - RT_ERR_INBW_RATE, /* 0x000c0005, invalid input bandwidth */ - - /* 0x000dxxxx for QoS */ - RT_ERR_QOS_1P_PRIORITY = 0x000d0000, /* 0x000d0000, invalid 802.1P priority */ - RT_ERR_QOS_DSCP_VALUE, /* 0x000d0001, invalid DSCP value */ - RT_ERR_QOS_INT_PRIORITY, /* 0x000d0002, invalid internal priority */ - RT_ERR_QOS_SEL_DSCP_PRI, /* 0x000d0003, invalid DSCP selection priority */ - RT_ERR_QOS_SEL_PORT_PRI, /* 0x000d0004, invalid port selection priority */ - RT_ERR_QOS_SEL_IN_ACL_PRI, /* 0x000d0005, invalid ingress ACL selection priority */ - RT_ERR_QOS_SEL_CLASS_PRI, /* 0x000d0006, invalid classifier selection priority */ - RT_ERR_QOS_EBW_RATE, /* 0x000d0007, invalid egress bandwidth rate */ - RT_ERR_QOS_SCHE_TYPE, /* 0x000d0008, invalid QoS scheduling type */ - RT_ERR_QOS_QUEUE_WEIGHT, /* 0x000d0009, invalid Queue weight */ - RT_ERR_QOS_SEL_PRI_SOURCE, /* 0x000d000a, invalid selection of priority source */ - - /* 0x000exxxx for port ability */ - RT_ERR_PHY_PAGE_ID = 0x000e0000, /* 0x000e0000, invalid PHY page id */ - RT_ERR_PHY_REG_ID, /* 0x000e0001, invalid PHY reg id */ - RT_ERR_PHY_DATAMASK, /* 0x000e0002, invalid PHY data mask */ - RT_ERR_PHY_AUTO_NEGO_MODE, /* 0x000e0003, invalid PHY auto-negotiation mode*/ - RT_ERR_PHY_SPEED, /* 0x000e0004, invalid PHY speed setting */ - RT_ERR_PHY_DUPLEX, /* 0x000e0005, invalid PHY duplex setting */ - RT_ERR_PHY_FORCE_ABILITY, /* 0x000e0006, invalid PHY force mode ability parameter */ - RT_ERR_PHY_FORCE_1000, /* 0x000e0007, invalid PHY force mode 1G speed setting */ - RT_ERR_PHY_TXRX, /* 0x000e0008, invalid PHY tx/rx */ - RT_ERR_PHY_ID, /* 0x000e0009, invalid PHY id */ - RT_ERR_PHY_RTCT_NOT_FINISH, /* 0x000e000a, PHY RTCT in progress */ - - /* 0x000fxxxx for mirror */ - RT_ERR_MIRROR_DIRECTION = 0x000f0000, /* 0x000f0000, invalid error mirror direction */ - RT_ERR_MIRROR_SESSION_FULL, /* 0x000f0001, mirroring session is full */ - RT_ERR_MIRROR_SESSION_NOEXIST, /* 0x000f0002, mirroring session not exist */ - RT_ERR_MIRROR_PORT_EXIST, /* 0x000f0003, mirroring port already exists */ - RT_ERR_MIRROR_PORT_NOT_EXIST, /* 0x000f0004, mirroring port does not exists */ - RT_ERR_MIRROR_PORT_FULL, /* 0x000f0005, Exceeds maximum number of supported mirroring port */ - - /* 0x0010xxxx for stat */ - RT_ERR_STAT_INVALID_GLOBAL_CNTR = 0x00100000, /* 0x00100000, Invalid Global Counter */ - RT_ERR_STAT_INVALID_PORT_CNTR, /* 0x00100001, Invalid Port Counter */ - RT_ERR_STAT_GLOBAL_CNTR_FAIL, /* 0x00100002, Could not retrieve/reset Global Counter */ - RT_ERR_STAT_PORT_CNTR_FAIL, /* 0x00100003, Could not retrieve/reset Port Counter */ - RT_ERR_STAT_INVALID_CNTR, /* 0x00100004, Invalid Counter */ - RT_ERR_STAT_CNTR_FAIL, /* 0x00100005, Could not retrieve/reset Counter */ - - /* 0x0011xxxx for dot1x */ - RT_ERR_DOT1X_INVALID_DIRECTION = 0x00110000, /* 0x00110000, Invalid Authentication Direction */ - RT_ERR_DOT1X_PORTBASEDPNEN, /* 0x00110001, Port-based enable port error */ - RT_ERR_DOT1X_PORTBASEDAUTH, /* 0x00110002, Port-based auth port error */ - RT_ERR_DOT1X_PORTBASEDOPDIR, /* 0x00110003, Port-based opdir error */ - RT_ERR_DOT1X_MACBASEDPNEN, /* 0x00110004, MAC-based enable port error */ - RT_ERR_DOT1X_MACBASEDOPDIR, /* 0x00110005, MAC-based opdir error */ - RT_ERR_DOT1X_PROC, /* 0x00110006, unauthorized behavior error */ - RT_ERR_DOT1X_GVLANIDX, /* 0x00110007, guest vlan index error */ - RT_ERR_DOT1X_GVLANTALK, /* 0x00110008, guest vlan OPDIR error */ - RT_ERR_DOT1X_MAC_PORT_MISMATCH, /* 0x00110009, Auth MAC and port mismatch eror */ - - RT_ERR_END /* The symbol is the latest symbol */ -} rt_error_code_t; - - -#endif /* __COMMON_RT_ERROR_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_hal.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_hal.h deleted file mode 100644 index 6ddb23f2ed..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_hal.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef __RTK_HAL_H__ -#define __RTK_HAL_H__ -#include "ra_ioctl.h" - -#define RTK_SW_VID_RANGE 16 -void rtk_hal_switch_init(void); -void rtk_hal_dump_mib(void); -void rtk_hal_dump_full_mib(void); -int rtk_hal_dump_vlan(void); -void rtk_hal_clear_vlan(void); -int rtk_hal_set_vlan(struct ra_switch_ioctl_data *data); -int rtk_hal_set_ingress_rate(struct ra_switch_ioctl_data *data); -int rtk_hal_set_egress_rate(struct ra_switch_ioctl_data *data); -void rtk_hal_dump_table(void); -void rtk_hal_clear_table(void); -void rtk_hal_get_phy_status(struct ra_switch_ioctl_data *data); -void rtk_hal_set_port_mirror(struct ra_switch_ioctl_data *data); -void rtk_hal_read_reg(struct ra_switch_ioctl_data *data); -void rtk_hal_write_reg(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_en(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_set_table2type(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_get_table2type(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_set_port2table(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_get_port2table(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_set_port2pri(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_get_port2pri(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_set_dscp2pri(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_get_dscp2pri(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_set_pri2queue(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_get_pri2queue(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_set_queue_weight(struct ra_switch_ioctl_data *data); -void rtk_hal_qos_get_queue_weight(struct ra_switch_ioctl_data *data); -void rtk_hal_enable_igmpsnoop(struct ra_switch_ioctl_data *data); -void rtk_hal_disable_igmpsnoop(void); -void rtk_hal_set_phy_test_mode(struct ra_switch_ioctl_data *data); -void rtk_hal_get_phy_reg(struct ra_switch_ioctl_data *data); -void rtk_hal_set_phy_reg(struct ra_switch_ioctl_data *data); -void rtk_hal_vlan_tag(struct ra_switch_ioctl_data *data); -void rtk_hal_vlan_portpvid_set(rtk_port_t port, rtk_vlan_t pvid, rtk_pri_t priority); -void rtk_hal_add_table(struct ra_switch_ioctl_data *data); -void rtk_hal_del_table(struct ra_switch_ioctl_data *data); -void rtk_hal_vlan_mode(struct ra_switch_ioctl_data *data); -void rtk_hal_set_port_trunk(struct ra_switch_ioctl_data *data); -#endif diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_switch.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_switch.h deleted file mode 100644 index b0ca13682c..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_switch.h +++ /dev/null @@ -1,737 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76336 $ - * $Date: 2017-03-09 10:41:21 +0800 (週四, 09 三月 2017) $ - * - * Purpose : RTK switch high-level API - * Feature : Here is a list of all functions and variables in this module. - * - */ - -#ifndef __RTK_SWITCH_H__ -#define __RTK_SWITCH_H__ - -#include - -#define UNDEFINE_PHY_PORT (0xFF) -#define RTK_SWITCH_PORT_NUM (32) - -#define MAXPKTLEN_CFG_ID_MAX (1) - -#define RTK_SWITCH_MAX_PKTLEN (0x3FFF) - -typedef enum init_state_e -{ - INIT_NOT_COMPLETED = 0, - INIT_COMPLETED, - INIT_STATE_END -} init_state_t; - -typedef enum switch_chip_e -{ - CHIP_RTL8367C = 0, - CHIP_RTL8370B, - CHIP_RTL8364B, - CHIP_RTL8363SC_VB, - CHIP_END -}switch_chip_t; - -typedef enum port_type_e -{ - UTP_PORT = 0, - EXT_PORT, - UNKNOWN_PORT = 0xFF, - PORT_TYPE_END -}port_type_t; - -typedef struct rtk_switch_halCtrl_s -{ - switch_chip_t switch_type; - rtk_uint32 l2p_port[RTK_SWITCH_PORT_NUM]; - rtk_uint32 p2l_port[RTK_SWITCH_PORT_NUM]; - port_type_t log_port_type[RTK_SWITCH_PORT_NUM]; - rtk_uint32 ptp_port[RTK_SWITCH_PORT_NUM]; - rtk_uint32 valid_portmask; - rtk_uint32 valid_utp_portmask; - rtk_uint32 valid_ext_portmask; - rtk_uint32 valid_cpu_portmask; - rtk_uint32 min_phy_port; - rtk_uint32 max_phy_port; - rtk_uint32 phy_portmask; - rtk_uint32 combo_logical_port; - rtk_uint32 hsg_logical_port; - rtk_uint32 sg_logical_portmask; - rtk_uint32 max_meter_id; - rtk_uint32 max_lut_addr_num; - rtk_uint32 trunk_group_mask; - -}rtk_switch_halCtrl_t; - -typedef enum rtk_switch_maxPktLen_linkSpeed_e { - MAXPKTLEN_LINK_SPEED_FE = 0, - MAXPKTLEN_LINK_SPEED_GE, - MAXPKTLEN_LINK_SPEED_END, -} rtk_switch_maxPktLen_linkSpeed_t; - - -/* UTIL MACRO */ -#define RTK_CHK_INIT_STATE() \ - do \ - { \ - if(rtk_switch_initialState_get() != INIT_COMPLETED) \ - { \ - return RT_ERR_NOT_INIT; \ - } \ - }while(0) - -#define RTK_CHK_PORT_VALID(__port__) \ - do \ - { \ - if(rtk_switch_logicalPortCheck(__port__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_ID; \ - } \ - }while(0) - -#define RTK_CHK_PORT_IS_UTP(__port__) \ - do \ - { \ - if(rtk_switch_isUtpPort(__port__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_ID; \ - } \ - }while(0) - -#define RTK_CHK_PORT_IS_EXT(__port__) \ - do \ - { \ - if(rtk_switch_isExtPort(__port__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_ID; \ - } \ - }while(0) - -#define RTK_CHK_PORT_IS_COMBO(__port__) \ - do \ - { \ - if(rtk_switch_isComboPort(__port__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_ID; \ - } \ - }while(0) - -#define RTK_CHK_PORT_IS_PTP(__port__) \ - do \ - { \ - if(rtk_switch_isPtpPort(__port__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_ID; \ - } \ - }while(0) - -#define RTK_CHK_PORTMASK_VALID(__portmask__) \ - do \ - { \ - if(rtk_switch_isPortMaskValid(__portmask__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_MASK; \ - } \ - }while(0) - -#define RTK_CHK_PORTMASK_VALID_ONLY_UTP(__portmask__) \ - do \ - { \ - if(rtk_switch_isPortMaskUtp(__portmask__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_MASK; \ - } \ - }while(0) - -#define RTK_CHK_PORTMASK_VALID_ONLY_EXT(__portmask__) \ - do \ - { \ - if(rtk_switch_isPortMaskExt(__portmask__) != RT_ERR_OK) \ - { \ - return RT_ERR_PORT_MASK; \ - } \ - }while(0) - -#define RTK_CHK_TRUNK_GROUP_VALID(__grpId__) \ - do \ - { \ - if(rtk_switch_isValidTrunkGrpId(__grpId__) != RT_ERR_OK) \ - { \ - return RT_ERR_LA_TRUNK_ID; \ - } \ - }while(0) - -#define RTK_PORTMASK_IS_PORT_SET(__portmask__, __port__) (((__portmask__).bits[0] & (0x00000001 << __port__)) ? 1 : 0) -#define RTK_PORTMASK_IS_EMPTY(__portmask__) (((__portmask__).bits[0] == 0) ? 1 : 0) -#define RTK_PORTMASK_CLEAR(__portmask__) ((__portmask__).bits[0] = 0) -#define RTK_PORTMASK_PORT_SET(__portmask__, __port__) ((__portmask__).bits[0] |= (0x00000001 << __port__)) -#define RTK_PORTMASK_PORT_CLEAR(__portmask__, __port__) ((__portmask__).bits[0] &= ~(0x00000001 << __port__)) -#define RTK_PORTMASK_ALLPORT_SET(__portmask__) (rtk_switch_logPortMask_get(&__portmask__)) -#define RTK_PORTMASK_SCAN(__portmask__, __port__) for(__port__ = 0; __port__ < RTK_SWITCH_PORT_NUM; __port__++) if(RTK_PORTMASK_IS_PORT_SET(__portmask__, __port__)) -#define RTK_PORTMASK_COMPARE(__portmask_A__, __portmask_B__) ((__portmask_A__).bits[0] - (__portmask_B__).bits[0]) - -#define RTK_SCAN_ALL_PHY_PORTMASK(__port__) for(__port__ = 0; __port__ < RTK_SWITCH_PORT_NUM; __port__++) if( (rtk_switch_phyPortMask_get() & (0x00000001 << __port__))) -#define RTK_SCAN_ALL_LOG_PORT(__port__) for(__port__ = 0; __port__ < RTK_SWITCH_PORT_NUM; __port__++) if( rtk_switch_logicalPortCheck(__port__) == RT_ERR_OK) -#define RTK_SCAN_ALL_LOG_PORTMASK(__portmask__) for((__portmask__).bits[0] = 0; (__portmask__).bits[0] < 0x7FFFF; (__portmask__).bits[0]++) if( rtk_switch_isPortMaskValid(&__portmask__) == RT_ERR_OK) - -/* Port mask defination */ -#define RTK_PHY_PORTMASK_ALL (rtk_switch_phyPortMask_get()) - -/* Port defination*/ -#define RTK_MAX_LOGICAL_PORT_ID (rtk_switch_maxLogicalPort_get()) - -/* Function Name: - * rtk_switch_probe - * Description: - * Probe switch - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Switch probed - * RT_ERR_FAILED - Switch Unprobed. - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_probe(switch_chip_t *pSwitchChip); - -/* Function Name: - * rtk_switch_initialState_set - * Description: - * Set initial status - * Input: - * state - Initial state; - * Output: - * None - * Return: - * RT_ERR_OK - Initialized - * RT_ERR_FAILED - Uninitialized - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_initialState_set(init_state_t state); - -/* Function Name: - * rtk_switch_initialState_get - * Description: - * Get initial status - * Input: - * None - * Output: - * None - * Return: - * INIT_COMPLETED - Initialized - * INIT_NOT_COMPLETED - Uninitialized - * Note: - * - */ -extern init_state_t rtk_switch_initialState_get(void); - -/* Function Name: - * rtk_switch_logicalPortCheck - * Description: - * Check logical port ID. - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is correct - * RT_ERR_FAILED - Port ID is not correct - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_logicalPortCheck(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_isUtpPort - * Description: - * Check is logical port a UTP port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a UTP port - * RT_ERR_FAILED - Port ID is not a UTP port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isUtpPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_isExtPort - * Description: - * Check is logical port a Extension port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a EXT port - * RT_ERR_FAILED - Port ID is not a EXT port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isExtPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_isHsgPort - * Description: - * Check is logical port a HSG port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a HSG port - * RT_ERR_FAILED - Port ID is not a HSG port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isHsgPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_isSgmiiPort - * Description: - * Check is logical port a SGMII port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a SGMII port - * RT_ERR_FAILED - Port ID is not a SGMII port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isSgmiiPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_isCPUPort - * Description: - * Check is logical port a CPU port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a CPU port - * RT_ERR_FAILED - Port ID is not a CPU port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isCPUPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_isComboPort - * Description: - * Check is logical port a Combo port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a combo port - * RT_ERR_FAILED - Port ID is not a combo port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isComboPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_ComboPort_get - * Description: - * Get Combo port ID - * Input: - * None - * Output: - * None - * Return: - * Port ID of combo port - * Note: - * - */ -extern rtk_uint32 rtk_switch_ComboPort_get(void); - -/* Function Name: - * rtk_switch_isPtpPort - * Description: - * Check is logical port a PTP port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a PTP port - * RT_ERR_FAILED - Port ID is not a PTP port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isPtpPort(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_port_L2P_get - * Description: - * Get physical port ID - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * Physical port ID - * Note: - * - */ -extern rtk_uint32 rtk_switch_port_L2P_get(rtk_port_t logicalPort); - -/* Function Name: - * rtk_switch_port_P2L_get - * Description: - * Get logical port ID - * Input: - * physicalPort - physical port ID - * Output: - * None - * Return: - * logical port ID - * Note: - * - */ -extern rtk_port_t rtk_switch_port_P2L_get(rtk_uint32 physicalPort); - -/* Function Name: - * rtk_switch_isPortMaskValid - * Description: - * Check portmask is valid or not - * Input: - * pPmask - logical port mask - * Output: - * None - * Return: - * RT_ERR_OK - port mask is valid - * RT_ERR_FAILED - port mask is not valid - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isPortMaskValid(rtk_portmask_t *pPmask); - -/* Function Name: - * rtk_switch_isPortMaskUtp - * Description: - * Check all ports in portmask are only UTP port - * Input: - * pPmask - logical port mask - * Output: - * None - * Return: - * RT_ERR_OK - Only UTP port in port mask - * RT_ERR_FAILED - Not only UTP port in port mask - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isPortMaskUtp(rtk_portmask_t *pPmask); - -/* Function Name: - * rtk_switch_isPortMaskExt - * Description: - * Check all ports in portmask are only EXT port - * Input: - * pPmask - logical port mask - * Output: - * None - * Return: - * RT_ERR_OK - Only EXT port in port mask - * RT_ERR_FAILED - Not only EXT port in port mask - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_isPortMaskExt(rtk_portmask_t *pPmask); - -/* Function Name: - * rtk_switch_portmask_L2P_get - * Description: - * Get physicl portmask from logical portmask - * Input: - * pLogicalPmask - logical port mask - * Output: - * pPhysicalPortmask - physical port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_PORT_MASK - Error port mask - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_portmask_L2P_get(rtk_portmask_t *pLogicalPmask, rtk_uint32 *pPhysicalPortmask); - -/* Function Name: - * rtk_switch_portmask_P2L_get - * Description: - * Get logical portmask from physical portmask - * Input: - * physicalPortmask - physical port mask - * Output: - * pLogicalPmask - logical port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_PORT_MASK - Error port mask - * Note: - * - */ -extern rtk_api_ret_t rtk_switch_portmask_P2L_get(rtk_uint32 physicalPortmask, rtk_portmask_t *pLogicalPmask); - -/* Function Name: - * rtk_switch_phyPortMask_get - * Description: - * Get physical portmask - * Input: - * None - * Output: - * None - * Return: - * 0x00 - Not Initialize - * Other value - Physical port mask - * Note: - * - */ -rtk_uint32 rtk_switch_phyPortMask_get(void); - -/* Function Name: - * rtk_switch_logPortMask_get - * Description: - * Get Logical portmask - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_switch_logPortMask_get(rtk_portmask_t *pPortmask); - -/* Function Name: - * rtk_switch_init - * Description: - * Set chip to default configuration enviroment - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can set chip registers to default configuration for different release chip model. - */ -extern rtk_api_ret_t rtk_switch_init(void); - -/* Function Name: - * rtk_switch_portMaxPktLen_set - * Description: - * Set Max packet length - * Input: - * port - Port ID - * speed - Speed - * cfgId - Configuration ID - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -extern rtk_api_ret_t rtk_switch_portMaxPktLen_set(rtk_port_t port, rtk_switch_maxPktLen_linkSpeed_t speed, rtk_uint32 cfgId); - -/* Function Name: - * rtk_switch_portMaxPktLen_get - * Description: - * Get Max packet length - * Input: - * port - Port ID - * speed - Speed - * Output: - * pCfgId - Configuration ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -extern rtk_api_ret_t rtk_switch_portMaxPktLen_get(rtk_port_t port, rtk_switch_maxPktLen_linkSpeed_t speed, rtk_uint32 *pCfgId); - -/* Function Name: - * rtk_switch_maxPktLenCfg_set - * Description: - * Set Max packet length configuration - * Input: - * cfgId - Configuration ID - * pktLen - Max packet length - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -extern rtk_api_ret_t rtk_switch_maxPktLenCfg_set(rtk_uint32 cfgId, rtk_uint32 pktLen); - -/* Function Name: - * rtk_switch_maxPktLenCfg_get - * Description: - * Get Max packet length configuration - * Input: - * cfgId - Configuration ID - * pPktLen - Max packet length - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -extern rtk_api_ret_t rtk_switch_maxPktLenCfg_get(rtk_uint32 cfgId, rtk_uint32 *pPktLen); - -/* Function Name: - * rtk_switch_greenEthernet_set - * Description: - * Set all Ports Green Ethernet state. - * Input: - * enable - Green Ethernet state. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set all Ports Green Ethernet state. - * The configuration is as following: - * - DISABLE - * - ENABLE - */ -extern rtk_api_ret_t rtk_switch_greenEthernet_set(rtk_enable_t enable); - -/* Function Name: - * rtk_switch_greenEthernet_get - * Description: - * Get all Ports Green Ethernet state. - * Input: - * None - * Output: - * pEnable - Green Ethernet state. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API can get Green Ethernet state. - */ -extern rtk_api_ret_t rtk_switch_greenEthernet_get(rtk_enable_t *pEnable); - -/* Function Name: - * rtk_switch_maxLogicalPort_get - * Description: - * Get Max logical port ID - * Input: - * None - * Output: - * None - * Return: - * Max logical port - * Note: - * This API can get max logical port - */ -extern rtk_port_t rtk_switch_maxLogicalPort_get(void); - -/* Function Name: - * rtk_switch_maxMeterId_get - * Description: - * Get Max Meter ID - * Input: - * None - * Output: - * None - * Return: - * 0x00 - Not Initialize - * Other value - Max Meter ID - * Note: - * - */ -extern rtk_uint32 rtk_switch_maxMeterId_get(void); - -/* Function Name: - * rtk_switch_maxLutAddrNumber_get - * Description: - * Get Max LUT Address number - * Input: - * None - * Output: - * None - * Return: - * 0x00 - Not Initialize - * Other value - Max LUT Address number - * Note: - * - */ -extern rtk_uint32 rtk_switch_maxLutAddrNumber_get(void); - -/* Function Name: - * rtk_switch_isValidTrunkGrpId - * Description: - * Check if trunk group is valid or not - * Input: - * grpId - Group ID - * Output: - * None - * Return: - * RT_ERR_OK - Trunk Group ID is valid - * RT_ERR_LA_TRUNK_ID - Trunk Group ID is not valid - * Note: - * - */ -rtk_uint32 rtk_switch_isValidTrunkGrpId(rtk_uint32 grpId); - -#endif diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_types.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_types.h deleted file mode 100644 index 589ecb7811..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtk_types.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level type enum definition. - * Feature : - * - */ - -#ifndef _RTL8367C_TYPES_H_ -#define _RTL8367C_TYPES_H_ - -//#include - -typedef unsigned long long rtk_uint64; -typedef long long rtk_int64; -typedef unsigned int rtk_uint32; -typedef int rtk_int32; -typedef unsigned short rtk_uint16; -typedef short rtk_int16; -typedef unsigned char rtk_uint8; -typedef char rtk_int8; - -#define CONST_T const - -#define RTK_TOTAL_NUM_OF_WORD_FOR_1BIT_PORT_LIST 1 - -#define RTK_MAX_NUM_OF_PORT 8 -#define RTK_PORT_ID_MAX (RTK_MAX_NUM_OF_PORT-1) -#define RTK_PHY_ID_MAX (RTK_MAX_NUM_OF_PORT-4) -#define RTK_MAX_PORT_MASK 0xFF - -#define RTK_WHOLE_SYSTEM 0xFF - -typedef struct rtk_portmask_s -{ - rtk_uint32 bits[RTK_TOTAL_NUM_OF_WORD_FOR_1BIT_PORT_LIST]; -} rtk_portmask_t; - -typedef enum rtk_enable_e -{ - DISABLED = 0, - ENABLED, - RTK_ENABLE_END -} rtk_enable_t; - -#ifndef ETHER_ADDR_LEN -#define ETHER_ADDR_LEN 6 -#endif - -/* ethernet address type */ -typedef struct rtk_mac_s -{ - rtk_uint8 octet[ETHER_ADDR_LEN]; -} rtk_mac_t; - -typedef rtk_uint32 rtk_pri_t; /* priority vlaue */ -typedef rtk_uint32 rtk_qid_t; /* queue id type */ -typedef rtk_uint32 rtk_data_t; -typedef rtk_uint32 rtk_dscp_t; /* dscp vlaue */ -typedef rtk_uint32 rtk_fid_t; /* filter id type */ -typedef rtk_uint32 rtk_vlan_t; /* vlan id type */ -typedef rtk_uint32 rtk_mac_cnt_t; /* MAC count type */ -typedef rtk_uint32 rtk_meter_id_t; /* meter id type */ -typedef rtk_uint32 rtk_rate_t; /* rate type */ - -typedef enum rtk_port_e -{ - UTP_PORT0 = 0, - UTP_PORT1, - UTP_PORT2, - UTP_PORT3, - UTP_PORT4, - UTP_PORT5, - UTP_PORT6, - UTP_PORT7, - - EXT_PORT0 = 16, - EXT_PORT1, - EXT_PORT2, - - UNDEFINE_PORT = 30, - RTK_PORT_MAX = 31 -} rtk_port_t; - - -#ifndef _RTL_TYPES_H - -#if 0 -typedef unsigned long long uint64; -typedef long long int64; -typedef unsigned int uint32; -typedef int int32; -typedef unsigned short uint16; -typedef short int16; -typedef unsigned char uint8; -typedef char int8; -#endif - -typedef rtk_uint32 ipaddr_t; -typedef rtk_uint32 memaddr; - -#ifndef ETHER_ADDR_LEN -#define ETHER_ADDR_LEN 6 -#endif - -typedef struct ether_addr_s { - rtk_uint8 octet[ETHER_ADDR_LEN]; -} ether_addr_t; - -#ifdef __KERNEL__ -#define rtlglue_printf printk -#else -#define rtlglue_printf printf -#endif -#define PRINT rtlglue_printf -#endif /*_RTL_TYPES_H*/ - -/* type abstraction */ -#ifdef EMBEDDED_SUPPORT - -typedef rtk_int16 rtk_api_ret_t; -typedef rtk_int16 ret_t; -typedef rtk_uint32 rtk_u_long; - -#else - -typedef rtk_int32 rtk_api_ret_t; -typedef rtk_int32 ret_t; -typedef rtk_uint64 rtk_u_long_t; - -#endif - -#ifndef NULL -#define NULL 0 -#endif - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#define CONST const -#endif /* _RTL8367C_TYPES_H_ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv.h deleted file mode 100644 index 55cb41b067..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : - * - */ - - -#ifndef _RTL8367C_ASICDRV_H_ -#define _RTL8367C_ASICDRV_H_ - -#include -#include -#include -#include - -#define RTL8367C_REGBITLENGTH 16 -#define RTL8367C_REGDATAMAX 0xFFFF - -#define RTL8367C_VIDMAX 0xFFF -#define RTL8367C_EVIDMAX 0x1FFF -#define RTL8367C_CVIDXNO 32 -#define RTL8367C_CVIDXMAX (RTL8367C_CVIDXNO-1) - -#define RTL8367C_PRIMAX 7 -#define RTL8367C_DSCPMAX 63 - -#define RTL8367C_PORTNO 11 -#define RTL8367C_PORTIDMAX (RTL8367C_PORTNO-1) -#define RTL8367C_PMSKMAX ((1<<(RTL8367C_PORTNO))-1) -#define RTL8367C_PORTMASK 0x7FF - -#define RTL8367C_PHYNO 5 -#define RTL8367C_PHYIDMAX (RTL8367C_PHYNO-1) - -#define RTL8367C_SVIDXNO 64 -#define RTL8367C_SVIDXMAX (RTL8367C_SVIDXNO-1) -#define RTL8367C_MSTIMAX 15 - -#define RTL8367C_METERNO 64 -#define RTL8367C_METERMAX (RTL8367C_METERNO-1) -#define RTL8367C_METERBUCKETSIZEMAX 0xFFFF - -#define RTL8367C_QUEUENO 8 -#define RTL8367C_QIDMAX (RTL8367C_QUEUENO-1) - -#define RTL8367C_PHY_BUSY_CHECK_COUNTER 1000 - -#define RTL8367C_QOS_GRANULARTY_MAX 0x7FFFF -#define RTL8367C_QOS_GRANULARTY_LSB_MASK 0xFFFF -#define RTL8367C_QOS_GRANULARTY_LSB_OFFSET 0 -#define RTL8367C_QOS_GRANULARTY_MSB_MASK 0x70000 -#define RTL8367C_QOS_GRANULARTY_MSB_OFFSET 16 - -#define RTL8367C_QOS_GRANULARTY_UNIT_KBPS 8 - -#define RTL8367C_QOS_RATE_INPUT_MAX (0x1FFFF * 8) -#define RTL8367C_QOS_RATE_INPUT_MAX_HSG (0x7FFFF * 8) -#define RTL8367C_QOS_RATE_INPUT_MIN 8 -#define RTL8367C_QOS_PPS_INPUT_MAX (0x7FFFF) -#define RTL8367C_QOS_PPS_INPUT_MIN 1 - -#define RTL8367C_QUEUE_MASK 0xFF - -#define RTL8367C_EFIDMAX 0x7 -#define RTL8367C_FIDMAX 0xF - -#define RTL8367C_EAV_SECONDMAX 0xFFFFFFFF -#define RTL8367C_EAV_NANOSECONDMAX 0x3B9AC9FF - - -/* the above macro is generated by genDotH */ -#define RTL8367C_VALID_REG_NO 3869 - -/*======================================================================= - * Enum - *========================================================================*/ -enum RTL8367C_TABLE_ACCESS_OP -{ - TB_OP_READ = 0, - TB_OP_WRITE -}; - -enum RTL8367C_TABLE_ACCESS_TARGET -{ - TB_TARGET_ACLRULE = 1, - TB_TARGET_ACLACT, - TB_TARGET_CVLAN, - TB_TARGET_L2, - TB_TARGET_IGMP_GROUP -}; - -#define RTL8367C_TABLE_ACCESS_REG_DATA(op, target) ((op << 3) | target) - -/*======================================================================= - * Structures - *========================================================================*/ - - -#ifdef __cplusplus -extern "C" { -#endif -extern ret_t rtl8367c_setAsicRegBit(rtk_uint32 reg, rtk_uint32 bit, rtk_uint32 value); -extern ret_t rtl8367c_getAsicRegBit(rtk_uint32 reg, rtk_uint32 bit, rtk_uint32 *pValue); - -extern ret_t rtl8367c_setAsicRegBits(rtk_uint32 reg, rtk_uint32 bits, rtk_uint32 value); -extern ret_t rtl8367c_getAsicRegBits(rtk_uint32 reg, rtk_uint32 bits, rtk_uint32 *pValue); - -extern ret_t rtl8367c_setAsicReg(rtk_uint32 reg, rtk_uint32 value); -extern ret_t rtl8367c_getAsicReg(rtk_uint32 reg, rtk_uint32 *pValue); - -#ifdef __cplusplus -} -#endif - - - -#endif /*#ifndef _RTL8367C_ASICDRV_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_acl.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_acl.h deleted file mode 100644 index 8ae69ac332..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_acl.h +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : ACL related function drivers - * - */ - -#ifndef _RTL8367C_ASICDRV_ACL_H_ -#define _RTL8367C_ASICDRV_ACL_H_ - -#include - -#define RTL8367C_ACLRULENO 96 - -#define RTL8367C_ACLRULEMAX (RTL8367C_ACLRULENO-1) -#define RTL8367C_ACLRULEFIELDNO 8 -#define RTL8367C_ACLTEMPLATENO 5 -#define RTL8367C_ACLTYPEMAX (RTL8367C_ACLTEMPLATENO-1) - -#define RTL8367C_ACLRULETBLEN 9 -#define RTL8367C_ACLACTTBLEN 4 -#define RTL8367C_ACLRULETBADDR(type, rule) ((type << 6) | rule) -#define RTL8367C_ACLRULETBADDR2(type, rule) ((type << 5) | (rule + 64)) - -#define ACL_ACT_CVLAN_ENABLE_MASK 0x1 -#define ACL_ACT_SVLAN_ENABLE_MASK 0x2 -#define ACL_ACT_PRIORITY_ENABLE_MASK 0x4 -#define ACL_ACT_POLICING_ENABLE_MASK 0x8 -#define ACL_ACT_FWD_ENABLE_MASK 0x10 -#define ACL_ACT_INTGPIO_ENABLE_MASK 0x20 - -#define RTL8367C_ACLRULETAGBITS 5 - -#define RTL8367C_ACLRANGENO 16 - -#define RTL8367C_ACLRANGEMAX (RTL8367C_ACLRANGENO-1) - -#define RTL8367C_ACL_PORTRANGEMAX (0xFFFF) -#define RTL8367C_ACL_ACT_TABLE_LEN (4) - -enum ACLTCAMTYPES -{ - CAREBITS= 0, - DATABITS -}; - -typedef enum aclFwdAct -{ - RTL8367C_ACL_FWD_MIRROR = 0, - RTL8367C_ACL_FWD_REDIRECT, - RTL8367C_ACL_FWD_MIRRORFUNTION, - RTL8367C_ACL_FWD_TRAP, -} rtl8367c_aclFwd_t; - -enum ACLFIELDTYPES -{ - ACL_UNUSED, - ACL_DMAC0, - ACL_DMAC1, - ACL_DMAC2, - ACL_SMAC0, - ACL_SMAC1, - ACL_SMAC2, - ACL_ETHERTYPE, - ACL_STAG, - ACL_CTAG, - ACL_IP4SIP0 = 0x10, - ACL_IP4SIP1, - ACL_IP4DIP0, - ACL_IP4DIP1, - ACL_IP6SIP0WITHIPV4 = 0x20, - ACL_IP6SIP1WITHIPV4, - ACL_IP6DIP0WITHIPV4 = 0x28, - ACL_IP6DIP1WITHIPV4, - ACL_VIDRANGE = 0x30, - ACL_IPRANGE, - ACL_PORTRANGE, - ACL_FIELD_VALID, - ACL_FIELD_SELECT00 = 0x40, - ACL_FIELD_SELECT01, - ACL_FIELD_SELECT02, - ACL_FIELD_SELECT03, - ACL_FIELD_SELECT04, - ACL_FIELD_SELECT05, - ACL_FIELD_SELECT06, - ACL_FIELD_SELECT07, - ACL_FIELD_SELECT08, - ACL_FIELD_SELECT09, - ACL_FIELD_SELECT10, - ACL_FIELD_SELECT11, - ACL_FIELD_SELECT12, - ACL_FIELD_SELECT13, - ACL_FIELD_SELECT14, - ACL_FIELD_SELECT15, - ACL_TCPSPORT = 0x80, - ACL_TCPDPORT, - ACL_TCPFLAG, - ACL_UDPSPORT, - ACL_UDPDPORT, - ACL_ICMPCODETYPE, - ACL_IGMPTYPE, - ACL_SPORT, - ACL_DPORT, - ACL_IP4TOSPROTO, - ACL_IP4FLAGOFF, - ACL_TCNH, - ACL_CPUTAG, - ACL_L2PAYLOAD, - ACL_IP6SIP0, - ACL_IP6SIP1, - ACL_IP6SIP2, - ACL_IP6SIP3, - ACL_IP6SIP4, - ACL_IP6SIP5, - ACL_IP6SIP6, - ACL_IP6SIP7, - ACL_IP6DIP0, - ACL_IP6DIP1, - ACL_IP6DIP2, - ACL_IP6DIP3, - ACL_IP6DIP4, - ACL_IP6DIP5, - ACL_IP6DIP6, - ACL_IP6DIP7, - ACL_TYPE_END -}; - -struct acl_rule_smi_st{ - rtk_uint16 rule_info; - rtk_uint16 field[RTL8367C_ACLRULEFIELDNO]; -}; - -struct acl_rule_smi_ext_st{ - rtk_uint16 rule_info; -}; - -typedef struct ACLRULESMI{ - struct acl_rule_smi_st care_bits; - rtk_uint16 valid:1; - struct acl_rule_smi_st data_bits; - - struct acl_rule_smi_ext_st care_bits_ext; - struct acl_rule_smi_ext_st data_bits_ext; -}rtl8367c_aclrulesmi; - -struct acl_rule_st{ - rtk_uint16 active_portmsk:11; - rtk_uint16 type:3; - rtk_uint16 tag_exist:5; - rtk_uint16 field[RTL8367C_ACLRULEFIELDNO]; -}; - -typedef struct ACLRULE{ - struct acl_rule_st data_bits; - rtk_uint16 valid:1; - struct acl_rule_st care_bits; -}rtl8367c_aclrule; - - -typedef struct rtl8367c_acltemplate_s{ - rtk_uint8 field[8]; -}rtl8367c_acltemplate_t; - - -typedef struct acl_act_s{ - rtk_uint16 cvidx_cact:7; - rtk_uint16 cact:2; - rtk_uint16 svidx_sact:7; - rtk_uint16 sact:2; - - - rtk_uint16 aclmeteridx:7; - rtk_uint16 fwdpmask:11; - rtk_uint16 fwdact:2; - - rtk_uint16 pridx:7; - rtk_uint16 priact:2; - rtk_uint16 gpio_pin:4; - rtk_uint16 gpio_en:1; - rtk_uint16 aclint:1; - - rtk_uint16 cact_ext:2; - rtk_uint16 fwdact_ext:1; - rtk_uint16 tag_fmt:2; -}rtl8367c_acl_act_t; - -typedef struct acl_rule_union_s -{ - rtl8367c_aclrule aclRule; - rtl8367c_acl_act_t aclAct; - rtk_uint32 aclActCtrl; - rtk_uint32 aclNot; -}rtl8367c_acl_rule_union_t; - - -extern ret_t rtl8367c_setAsicAcl(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicAcl(rtk_uint32 port, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicAclUnmatchedPermit(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicAclUnmatchedPermit(rtk_uint32 port, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicAclRule(rtk_uint32 index, rtl8367c_aclrule *pAclRule); -extern ret_t rtl8367c_getAsicAclRule(rtk_uint32 index, rtl8367c_aclrule *pAclRule); -extern ret_t rtl8367c_setAsicAclNot(rtk_uint32 index, rtk_uint32 not); -extern ret_t rtl8367c_getAsicAclNot(rtk_uint32 index, rtk_uint32* pNot); -extern ret_t rtl8367c_setAsicAclTemplate(rtk_uint32 index, rtl8367c_acltemplate_t* pAclType); -extern ret_t rtl8367c_getAsicAclTemplate(rtk_uint32 index, rtl8367c_acltemplate_t *pAclType); -extern ret_t rtl8367c_setAsicAclAct(rtk_uint32 index, rtl8367c_acl_act_t* pAclAct); -extern ret_t rtl8367c_getAsicAclAct(rtk_uint32 index, rtl8367c_acl_act_t *pAclAct); -extern ret_t rtl8367c_setAsicAclActCtrl(rtk_uint32 index, rtk_uint32 aclActCtrl); -extern ret_t rtl8367c_getAsicAclActCtrl(rtk_uint32 index, rtk_uint32 *aclActCtrl); -extern ret_t rtl8367c_setAsicAclPortRange(rtk_uint32 index, rtk_uint32 type, rtk_uint32 upperPort, rtk_uint32 lowerPort); -extern ret_t rtl8367c_getAsicAclPortRange(rtk_uint32 index, rtk_uint32* pType, rtk_uint32* pUpperPort, rtk_uint32* pLowerPort); -extern ret_t rtl8367c_setAsicAclVidRange(rtk_uint32 index, rtk_uint32 type, rtk_uint32 upperVid, rtk_uint32 lowerVid); -extern ret_t rtl8367c_getAsicAclVidRange(rtk_uint32 index, rtk_uint32* pType, rtk_uint32* pUpperVid, rtk_uint32* pLowerVid); -extern ret_t rtl8367c_setAsicAclIpRange(rtk_uint32 index, rtk_uint32 type, ipaddr_t upperIp, ipaddr_t lowerIp); -extern ret_t rtl8367c_getAsicAclIpRange(rtk_uint32 index, rtk_uint32* pType, ipaddr_t* pUpperIp, ipaddr_t* pLowerIp); -extern ret_t rtl8367c_setAsicAclGpioPolarity(rtk_uint32 polarity); -extern ret_t rtl8367c_getAsicAclGpioPolarity(rtk_uint32* pPolarity); - -#endif /*_RTL8367C_ASICDRV_ACL_H_*/ - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_cputag.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_cputag.h deleted file mode 100644 index f7a460145e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_cputag.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Proprietary CPU-tag related function drivers - * - */ - -#ifndef _RTL8367C_ASICDRV_CPUTAG_H_ -#define _RTL8367C_ASICDRV_CPUTAG_H_ - -#include - -enum CPUTAG_INSERT_MODE -{ - CPUTAG_INSERT_TO_ALL = 0, - CPUTAG_INSERT_TO_TRAPPING, - CPUTAG_INSERT_TO_NO, - CPUTAG_INSERT_END -}; - -extern ret_t rtl8367c_setAsicCputagEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicCputagEnable(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicCputagTrapPort(rtk_uint32 port); -extern ret_t rtl8367c_getAsicCputagTrapPort(rtk_uint32 *pPort); -extern ret_t rtl8367c_setAsicCputagPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicCputagPortmask(rtk_uint32 *pPmsk); -extern ret_t rtl8367c_setAsicCputagInsertMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicCputagInsertMode(rtk_uint32 *pMode); -extern ret_t rtl8367c_setAsicCputagPriorityRemapping(rtk_uint32 srcPri, rtk_uint32 newPri); -extern ret_t rtl8367c_getAsicCputagPriorityRemapping(rtk_uint32 srcPri, rtk_uint32 *pNewPri); -extern ret_t rtl8367c_setAsicCputagPosition(rtk_uint32 postion); -extern ret_t rtl8367c_getAsicCputagPosition(rtk_uint32* pPostion); -extern ret_t rtl8367c_setAsicCputagMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicCputagMode(rtk_uint32 *pMode); -extern ret_t rtl8367c_setAsicCputagRxMinLength(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicCputagRxMinLength(rtk_uint32 *pMode); - -#endif /*#ifndef _RTL8367C_ASICDRV_CPUTAG_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_dot1x.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_dot1x.h deleted file mode 100644 index 7639ae782b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_dot1x.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : 802.1X related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_DOT1X_H_ -#define _RTL8367C_ASICDRV_DOT1X_H_ - -#include - -enum DOT1X_UNAUTH_BEHAV -{ - DOT1X_UNAUTH_DROP = 0, - DOT1X_UNAUTH_TRAP, - DOT1X_UNAUTH_GVLAN, - DOT1X_UNAUTH_END -}; - -extern ret_t rtl8367c_setAsic1xPBEnConfig(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsic1xPBEnConfig(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsic1xPBAuthConfig(rtk_uint32 port, rtk_uint32 auth); -extern ret_t rtl8367c_getAsic1xPBAuthConfig(rtk_uint32 port, rtk_uint32 *pAuth); -extern ret_t rtl8367c_setAsic1xPBOpdirConfig(rtk_uint32 port, rtk_uint32 opdir); -extern ret_t rtl8367c_getAsic1xPBOpdirConfig(rtk_uint32 port, rtk_uint32 *pOpdir); -extern ret_t rtl8367c_setAsic1xMBEnConfig(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsic1xMBEnConfig(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsic1xMBOpdirConfig(rtk_uint32 opdir); -extern ret_t rtl8367c_getAsic1xMBOpdirConfig(rtk_uint32 *pOpdir); -extern ret_t rtl8367c_setAsic1xProcConfig(rtk_uint32 port, rtk_uint32 proc); -extern ret_t rtl8367c_getAsic1xProcConfig(rtk_uint32 port, rtk_uint32 *pProc); -extern ret_t rtl8367c_setAsic1xGuestVidx(rtk_uint32 index); -extern ret_t rtl8367c_getAsic1xGuestVidx(rtk_uint32 *pIndex); -extern ret_t rtl8367c_setAsic1xGVOpdir(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsic1xGVOpdir(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsic1xTrapPriority(rtk_uint32 priority); -extern ret_t rtl8367c_getAsic1xTrapPriority(rtk_uint32 *pPriority); - - -#endif /*_RTL8367C_ASICDRV_DOT1X_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_eav.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_eav.h deleted file mode 100644 index b633f66fb0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_eav.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Ethernet AV related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_EAV_H_ -#define _RTL8367C_ASICDRV_EAV_H_ - -#include - -typedef enum RTL8367C_PTP_TIME_CMD_E -{ - PTP_TIME_READ = 0, - PTP_TIME_WRITE, - PTP_TIME_INC, - PTP_TIME_DEC, - PTP_TIME_CMD_END -}RTL8367C_PTP_TIME_CMD; - -typedef enum RTL8367C_PTP_TIME_ADJ_E -{ - PTP_TIME_ADJ_INC = 0, - PTP_TIME_ADJ_DEC, - PTP_TIME_ADJ_END -}RTL8367C_PTP_TIME_ADJ; - -typedef enum RTL8367C_PTP_TIME_CTRL_E -{ - PTP_TIME_CTRL_STOP = 0, - PTP_TIME_CTRL_START, - PTP_TIME_CTRL_END -}RTL8367C_PTP_TIME_CTRL; - -typedef enum RTL8367C_PTP_INTR_IMRS_E -{ - PTP_IMRS_TX_SYNC, - PTP_IMRS_TX_DELAY_REQ, - PTP_IMRS_TX_PDELAY_REQ, - PTP_IMRS_TX_PDELAY_RESP, - PTP_IMRS_RX_SYNC, - PTP_IMRS_RX_DELAY_REQ, - PTP_IMRS_RX_PDELAY_REQ, - PTP_IMRS_RX_PDELAY_RESP, - PTP_IMRS_END, -}RTL8367C_PTP_INTR_IMRS; - - -typedef enum RTL8367C_PTP_PKT_TYPE_E -{ - PTP_PKT_TYPE_TX_SYNC, - PTP_PKT_TYPE_TX_DELAY_REQ, - PTP_PKT_TYPE_TX_PDELAY_REQ, - PTP_PKT_TYPE_TX_PDELAY_RESP, - PTP_PKT_TYPE_RX_SYNC, - PTP_PKT_TYPE_RX_DELAY_REQ, - PTP_PKT_TYPE_RX_PDELAY_REQ, - PTP_PKT_TYPE_RX_PDELAY_RESP, - PTP_PKT_TYPE_END, -}RTL8367C_PTP_PKT_TYPE; - -typedef struct rtl8367c_ptp_time_stamp_s{ - rtk_uint32 sequence_id; - rtk_uint32 second; - rtk_uint32 nano_second; -}rtl8367c_ptp_time_stamp_t; - -#define RTL8367C_PTP_INTR_MASK 0xFF - -#define RTL8367C_PTP_PORT_MASK 0x3FF - -extern ret_t rtl8367c_setAsicEavMacAddress(ether_addr_t mac); -extern ret_t rtl8367c_getAsicEavMacAddress(ether_addr_t *pMac); -extern ret_t rtl8367c_setAsicEavTpid(rtk_uint32 outerTag, rtk_uint32 innerTag); -extern ret_t rtl8367c_getAsicEavTpid(rtk_uint32* pOuterTag, rtk_uint32* pInnerTag); -extern ret_t rtl8367c_setAsicEavSysTime(rtk_uint32 second, rtk_uint32 nanoSecond); -extern ret_t rtl8367c_getAsicEavSysTime(rtk_uint32* pSecond, rtk_uint32* pNanoSecond); -extern ret_t rtl8367c_setAsicEavSysTimeAdjust(rtk_uint32 type, rtk_uint32 second, rtk_uint32 nanoSecond); -extern ret_t rtl8367c_setAsicEavSysTimeCtrl(rtk_uint32 control); -extern ret_t rtl8367c_getAsicEavSysTimeCtrl(rtk_uint32* pControl); -extern ret_t rtl8367c_setAsicEavInterruptMask(rtk_uint32 imr); -extern ret_t rtl8367c_getAsicEavInterruptMask(rtk_uint32* pImr); -extern ret_t rtl8367c_getAsicEavInterruptStatus(rtk_uint32* pIms); -extern ret_t rtl8367c_setAsicEavPortInterruptStatus(rtk_uint32 port, rtk_uint32 ims); -extern ret_t rtl8367c_getAsicEavPortInterruptStatus(rtk_uint32 port, rtk_uint32* pIms); -extern ret_t rtl8367c_setAsicEavPortEnable(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicEavPortEnable(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_getAsicEavPortTimeStamp(rtk_uint32 port, rtk_uint32 type, rtl8367c_ptp_time_stamp_t* timeStamp); - -extern ret_t rtl8367c_setAsicEavTrap(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicEavTrap(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicEavEnable(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicEavEnable(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicEavPriRemapping(rtk_uint32 srcpriority, rtk_uint32 priority); -extern ret_t rtl8367c_getAsicEavPriRemapping(rtk_uint32 srcpriority, rtk_uint32 *pPriority); - -#endif /*#ifndef _RTL8367C_ASICDRV_EAV_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_eee.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_eee.h deleted file mode 100644 index 6bedce62b0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_eee.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 48989 $ - * $Date: 2014-07-01 15:45:24 +0800 (¶g¤G, 01 ¤C¤ë 2014) $ - * - * Purpose : RTL8370 switch high-level API for RTL8367C - * Feature : - * - */ - -#ifndef _RTL8367C_ASICDRV_EEE_H_ -#define _RTL8367C_ASICDRV_EEE_H_ - -#include - -#define EEE_OCP_PHY_ADDR (0xA5D0) - -extern ret_t rtl8367c_setAsicEee100M(rtk_uint32 port, rtk_uint32 enable); -extern ret_t rtl8367c_getAsicEee100M(rtk_uint32 port, rtk_uint32 *enable); -extern ret_t rtl8367c_setAsicEeeGiga(rtk_uint32 port, rtk_uint32 enable); -extern ret_t rtl8367c_getAsicEeeGiga(rtk_uint32 port, rtk_uint32 *enable); - - -#endif /*_RTL8367C_ASICDRV_EEE_H_*/ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_fc.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_fc.h deleted file mode 100644 index ce67cdebac..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_fc.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Flow control related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_FC_H_ -#define _RTL8367C_ASICDRV_FC_H_ - -#include - -#define RTL8367C_PAGE_NUMBER 0x600 - - -enum FLOW_CONTROL_TYPE -{ - FC_EGRESS = 0, - FC_INGRESS, -}; - -enum FC_JUMBO_SIZE -{ - FC_JUMBO_SIZE_3K = 0, - FC_JUMBO_SIZE_4K, - FC_JUMBO_SIZE_6K, - FC_JUMBO_SIZE_9K, - FC_JUMBO_SIZE_END, - -}; - - -extern ret_t rtl8367c_setAsicFlowControlSelect(rtk_uint32 select); -extern ret_t rtl8367c_getAsicFlowControlSelect(rtk_uint32 *pSelect); -extern ret_t rtl8367c_setAsicFlowControlJumboMode(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicFlowControlJumboMode(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicFlowControlJumboModeSize(rtk_uint32 size); -extern ret_t rtl8367c_getAsicFlowControlJumboModeSize(rtk_uint32* pSize); -extern ret_t rtl8367c_setAsicFlowControlQueueEgressEnable(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicFlowControlQueueEgressEnable(rtk_uint32 port, rtk_uint32 qid, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicFlowControlDropAll(rtk_uint32 dropall); -extern ret_t rtl8367c_getAsicFlowControlDropAll(rtk_uint32* pDropall); -extern ret_t rtl8367c_setAsicFlowControlPauseAllThreshold(rtk_uint32 threshold); -extern ret_t rtl8367c_getAsicFlowControlPauseAllThreshold(rtk_uint32 *pThreshold); -extern ret_t rtl8367c_setAsicFlowControlSystemThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlSystemThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlSharedThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlSharedThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlPortThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlPortThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlPortPrivateThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlPortPrivateThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlSystemDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlSystemDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlSharedDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlSharedDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlPortDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlPortDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlPortPrivateDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlPortPrivateDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlSystemJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlSystemJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlSharedJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlSharedJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlPortJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlPortJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); -extern ret_t rtl8367c_setAsicFlowControlPortPrivateJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold); -extern ret_t rtl8367c_getAsicFlowControlPortPrivateJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold); - -extern ret_t rtl8367c_setAsicEgressFlowControlPortDropGap(rtk_uint32 gap); -extern ret_t rtl8367c_getAsicEgressFlowControlPortDropGap(rtk_uint32 *pGap); -extern ret_t rtl8367c_setAsicEgressFlowControlQueueDropGap(rtk_uint32 gap); -extern ret_t rtl8367c_getAsicEgressFlowControlQueueDropGap(rtk_uint32 *pGap); -extern ret_t rtl8367c_setAsicEgressFlowControlPortDropThreshold(rtk_uint32 port, rtk_uint32 threshold); -extern ret_t rtl8367c_getAsicEgressFlowControlPortDropThreshold(rtk_uint32 port, rtk_uint32 *pThreshold); -extern ret_t rtl8367c_setAsicEgressFlowControlQueueDropThreshold(rtk_uint32 qid, rtk_uint32 threshold); -extern ret_t rtl8367c_getAsicEgressFlowControlQueueDropThreshold(rtk_uint32 qid, rtk_uint32 *pThreshold); -extern ret_t rtl8367c_getAsicEgressQueueEmptyPortMask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_getAsicTotalPage(rtk_uint32 *pPageCount); -extern ret_t rtl8367c_getAsicPulbicPage(rtk_uint32 *pPageCount); -extern ret_t rtl8367c_getAsicMaxTotalPage(rtk_uint32 *pPageCount); -extern ret_t rtl8367c_getAsicMaxPulbicPage(rtk_uint32 *pPageCount); -extern ret_t rtl8367c_getAsicPortPage(rtk_uint32 port, rtk_uint32 *pPageCount); -extern ret_t rtl8367c_getAsicPortPageMax(rtk_uint32 port, rtk_uint32 *pPageCount); -extern ret_t rtl8367c_setAsicFlowControlEgressPortIndep(rtk_uint32 port, rtk_uint32 enable); -extern ret_t rtl8367c_getAsicFlowControlEgressPortIndep(rtk_uint32 port, rtk_uint32 *pEnable); - -#endif /*_RTL8367C_ASICDRV_FC_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_green.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_green.h deleted file mode 100644 index 38fd085d06..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_green.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Green ethernet related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_GREEN_H_ -#define _RTL8367C_ASICDRV_GREEN_H_ - -#include -#include - -#define PHY_POWERSAVING_REG 24 - -extern ret_t rtl8367c_setAsicGreenTrafficType(rtk_uint32 priority, rtk_uint32 traffictype); -extern ret_t rtl8367c_getAsicGreenTrafficType(rtk_uint32 priority, rtk_uint32* pTraffictype); -extern ret_t rtl8367c_getAsicGreenPortPage(rtk_uint32 port, rtk_uint32* pPage); -extern ret_t rtl8367c_getAsicGreenHighPriorityTraffic(rtk_uint32 port, rtk_uint32* pIndicator); -extern ret_t rtl8367c_setAsicGreenHighPriorityTraffic(rtk_uint32 port); -extern ret_t rtl8367c_setAsicGreenEthernet(rtk_uint32 port, rtk_uint32 green); -extern ret_t rtl8367c_getAsicGreenEthernet(rtk_uint32 port, rtk_uint32* green); -extern ret_t rtl8367c_setAsicPowerSaving(rtk_uint32 phy, rtk_uint32 enable); -extern ret_t rtl8367c_getAsicPowerSaving(rtk_uint32 phy, rtk_uint32* enable); -#endif /*#ifndef _RTL8367C_ASICDRV_GREEN_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_hsb.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_hsb.h deleted file mode 100644 index f4f9bb377b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_hsb.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Field selector related functions - * - */ - -#ifndef _RTL8367C_ASICDRV__HSB_H_ -#define _RTL8367C_ASICDRV__HSB_H_ - -#include - -#define RTL8367C_FIELDSEL_FORMAT_NUMBER (16) -#define RTL8367C_FIELDSEL_MAX_OFFSET (255) - -enum FIELDSEL_FORMAT_FORMAT -{ - FIELDSEL_FORMAT_DEFAULT = 0, - FIELDSEL_FORMAT_RAW, - FIELDSEL_FORMAT_LLC, - FIELDSEL_FORMAT_IPV4, - FIELDSEL_FORMAT_ARP, - FIELDSEL_FORMAT_IPV6, - FIELDSEL_FORMAT_IPPAYLOAD, - FIELDSEL_FORMAT_L4PAYLOAD, - FIELDSEL_FORMAT_END -}; - -extern ret_t rtl8367c_setAsicFieldSelector(rtk_uint32 index, rtk_uint32 format, rtk_uint32 offset); -extern ret_t rtl8367c_getAsicFieldSelector(rtk_uint32 index, rtk_uint32* pFormat, rtk_uint32* pOffset); - -#endif /*_RTL8367C_ASICDRV__HSB_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_i2c.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_i2c.h deleted file mode 100644 index d5b095a0e5..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_i2c.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 38651 $ - * $Date: 2016-02-27 14:32:56 +0800 (©P¤T, 17 ¥|¤ë 2016) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : I2C related functions - * - */ - - -#ifndef _RTL8367C_ASICDRV_I2C_H_ -#define _RTL8367C_ASICDRV_I2C_H_ -#include -#include - - -#define TIMEROUT_FOR_MICROSEMI (0x400) - -#define GPIO_INPUT 1 -#define GPIO_OUTPUT 2 - -extern ret_t rtl8367c_setAsicI2C_checkBusIdle(void); -extern ret_t rtl8367c_setAsicI2CStartCmd(void); -extern ret_t rtl8367c_setAsicI2CStopCmd(void); -extern ret_t rtl8367c_setAsicI2CTxOneCharCmd(rtk_uint8 oneChar); -extern ret_t rtl8367c_setAsicI2CcheckRxAck(void); -extern ret_t rtl8367c_setAsicI2CRxOneCharCmd(rtk_uint8 *pValue); -extern ret_t rtl8367c_setAsicI2CTxAckCmd(void); -extern ret_t rtl8367c_setAsicI2CTxNoAckCmd(void); -extern ret_t rtl8367c_setAsicI2CSoftRSTseqCmd(void); -extern ret_t rtl8367c_setAsicI2CGpioPinGroup(rtk_uint32 pinGroup_ID); -extern ret_t rtl8367c_getAsicI2CGpioPinGroup(rtk_uint32 * pPinGroup_ID); - - - - - -#endif /*#ifndef _RTL8367C_ASICDRV_I2C_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_igmp.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_igmp.h deleted file mode 100644 index b879b6b520..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_igmp.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : IGMP related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_IGMP_H_ -#define _RTL8367C_ASICDRV_IGMP_H_ - -/****************************************************************/ -/* Header File inclusion */ -/****************************************************************/ -#include - -#define RTL8367C_MAX_LEAVE_TIMER (7) -#define RTL8367C_MAX_QUERY_INT (0xFFFF) -#define RTL8367C_MAX_ROB_VAR (7) - -#define RTL8367C_IGMP_GOUP_NO (256) -#define RTL8367C_IGMP_MAX_GOUP (0xFF) -#define RTL8367C_IGMP_GRP_BLEN (3) -#define RTL8367C_ROUTER_PORT_INVALID (0xF) - -enum RTL8367C_IGMPTABLE_FULL_OP -{ - TABLE_FULL_FORWARD = 0, - TABLE_FULL_DROP, - TABLE_FULL_TRAP, - TABLE_FULL_OP_END -}; - -enum RTL8367C_CRC_ERR_OP -{ - CRC_ERR_DROP = 0, - CRC_ERR_TRAP, - CRC_ERR_FORWARD, - CRC_ERR_OP_END -}; - -enum RTL8367C_IGMP_MLD_PROTOCOL_OP -{ - PROTOCOL_OP_ASIC = 0, - PROTOCOL_OP_FLOOD, - PROTOCOL_OP_TRAP, - PROTOCOL_OP_DROP, - PROTOCOL_OP_END -}; - -enum RTL8367C_IGMP_MLD_BYPASS_GROUP -{ - BYPASS_224_0_0_X = 0, - BYPASS_224_0_1_X, - BYPASS_239_255_255_X, - BYPASS_IPV6_00XX, - BYPASS_GROUP_END -}; - -typedef struct -{ - rtk_uint32 p0_timer; - rtk_uint32 p1_timer; - rtk_uint32 p2_timer; - rtk_uint32 p3_timer; - rtk_uint32 p4_timer; - rtk_uint32 p5_timer; - rtk_uint32 p6_timer; - rtk_uint32 p7_timer; - rtk_uint32 p8_timer; - rtk_uint32 p9_timer; - rtk_uint32 p10_timer; - rtk_uint32 report_supp_flag; - -}rtl8367c_igmpgroup; -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * This program is the proprietary software of Realtek Semiconductor - * Corporation and/or its licensors, and only be used, duplicated, - * modified or distributed under the authorized license from Realtek. - * - * ANY USE OF THE SOFTWARE OTHER THAN AS AUTHORIZED UNDER - * THIS LICENSE OR COPYRIGHT LAW IS PROHIBITED. - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : IGMP related functions - * - */ -#include - -ret_t rtl8367c_setAsicIgmp(rtk_uint32 enabled); -ret_t rtl8367c_getAsicIgmp(rtk_uint32 *pEnabled); -ret_t rtl8367c_setAsicIpMulticastVlanLeaky(rtk_uint32 port, rtk_uint32 enabled ); -ret_t rtl8367c_getAsicIpMulticastVlanLeaky(rtk_uint32 port, rtk_uint32 *pEnabled ); -ret_t rtl8367c_setAsicIGMPTableFullOP(rtk_uint32 operation); -ret_t rtl8367c_getAsicIGMPTableFullOP(rtk_uint32 *pOperation); -ret_t rtl8367c_setAsicIGMPCRCErrOP(rtk_uint32 operation); -ret_t rtl8367c_getAsicIGMPCRCErrOP(rtk_uint32 *pOperation); -ret_t rtl8367c_setAsicIGMPFastLeaveEn(rtk_uint32 enabled); -ret_t rtl8367c_getAsicIGMPFastLeaveEn(rtk_uint32 *pEnabled); -ret_t rtl8367c_setAsicIGMPLeaveTimer(rtk_uint32 leave_timer); -ret_t rtl8367c_getAsicIGMPLeaveTimer(rtk_uint32 *pLeave_timer); -ret_t rtl8367c_setAsicIGMPQueryInterval(rtk_uint32 interval); -ret_t rtl8367c_getAsicIGMPQueryInterval(rtk_uint32 *pInterval); -ret_t rtl8367c_setAsicIGMPRobVar(rtk_uint32 rob_var); -ret_t rtl8367c_getAsicIGMPRobVar(rtk_uint32 *pRob_var); -ret_t rtl8367c_setAsicIGMPStaticRouterPort(rtk_uint32 pmsk); -ret_t rtl8367c_getAsicIGMPStaticRouterPort(rtk_uint32 *pMsk); -ret_t rtl8367c_setAsicIGMPAllowDynamicRouterPort(rtk_uint32 pmsk); -ret_t rtl8367c_getAsicIGMPAllowDynamicRouterPort(rtk_uint32 *pPmsk); -ret_t rtl8367c_getAsicIGMPdynamicRouterPort1(rtk_uint32 *pPort, rtk_uint32 *pTimer); -ret_t rtl8367c_getAsicIGMPdynamicRouterPort2(rtk_uint32 *pPort, rtk_uint32 *pTimer); -ret_t rtl8367c_setAsicIGMPSuppression(rtk_uint32 report_supp_enabled, rtk_uint32 leave_supp_enabled); -ret_t rtl8367c_getAsicIGMPSuppression(rtk_uint32 *pReport_supp_enabled, rtk_uint32 *pLeave_supp_enabled); -ret_t rtl8367c_setAsicIGMPQueryRX(rtk_uint32 port, rtk_uint32 allow_query); -ret_t rtl8367c_getAsicIGMPQueryRX(rtk_uint32 port, rtk_uint32 *pAllow_query); -ret_t rtl8367c_setAsicIGMPReportRX(rtk_uint32 port, rtk_uint32 allow_report); -ret_t rtl8367c_getAsicIGMPReportRX(rtk_uint32 port, rtk_uint32 *pAllow_report); -ret_t rtl8367c_setAsicIGMPLeaveRX(rtk_uint32 port, rtk_uint32 allow_leave); -ret_t rtl8367c_getAsicIGMPLeaveRX(rtk_uint32 port, rtk_uint32 *pAllow_leave); -ret_t rtl8367c_setAsicIGMPMRPRX(rtk_uint32 port, rtk_uint32 allow_mrp); -ret_t rtl8367c_getAsicIGMPMRPRX(rtk_uint32 port, rtk_uint32 *pAllow_mrp); -ret_t rtl8367c_setAsicIGMPMcDataRX(rtk_uint32 port, rtk_uint32 allow_mcdata); -ret_t rtl8367c_getAsicIGMPMcDataRX(rtk_uint32 port, rtk_uint32 *pAllow_mcdata); -ret_t rtl8367c_setAsicIGMPv1Opeartion(rtk_uint32 port, rtk_uint32 igmpv1_op); -ret_t rtl8367c_getAsicIGMPv1Opeartion(rtk_uint32 port, rtk_uint32 *pIgmpv1_op); -ret_t rtl8367c_setAsicIGMPv2Opeartion(rtk_uint32 port, rtk_uint32 igmpv2_op); -ret_t rtl8367c_getAsicIGMPv2Opeartion(rtk_uint32 port, rtk_uint32 *pIgmpv2_op); -ret_t rtl8367c_setAsicIGMPv3Opeartion(rtk_uint32 port, rtk_uint32 igmpv3_op); -ret_t rtl8367c_getAsicIGMPv3Opeartion(rtk_uint32 port, rtk_uint32 *pIgmpv3_op); -ret_t rtl8367c_setAsicMLDv1Opeartion(rtk_uint32 port, rtk_uint32 mldv1_op); -ret_t rtl8367c_getAsicMLDv1Opeartion(rtk_uint32 port, rtk_uint32 *pMldv1_op); -ret_t rtl8367c_setAsicMLDv2Opeartion(rtk_uint32 port, rtk_uint32 mldv2_op); -ret_t rtl8367c_getAsicMLDv2Opeartion(rtk_uint32 port, rtk_uint32 *pMldv2_op); -ret_t rtl8367c_setAsicIGMPPortMAXGroup(rtk_uint32 port, rtk_uint32 max_group); -ret_t rtl8367c_getAsicIGMPPortMAXGroup(rtk_uint32 port, rtk_uint32 *pMax_group); -ret_t rtl8367c_getAsicIGMPPortCurrentGroup(rtk_uint32 port, rtk_uint32 *pCurrent_group); -ret_t rtl8367c_getAsicIGMPGroup(rtk_uint32 idx, rtk_uint32 *pValid, rtl8367c_igmpgroup *pGrp); -ret_t rtl8367c_setAsicIpMulticastPortIsoLeaky(rtk_uint32 port, rtk_uint32 enabled); -ret_t rtl8367c_getAsicIpMulticastPortIsoLeaky(rtk_uint32 port, rtk_uint32 *pEnabled); -ret_t rtl8367c_setAsicIGMPReportLeaveFlood(rtk_uint32 flood); -ret_t rtl8367c_getAsicIGMPReportLeaveFlood(rtk_uint32 *pFlood); -ret_t rtl8367c_setAsicIGMPDropLeaveZero(rtk_uint32 drop); -ret_t rtl8367c_getAsicIGMPDropLeaveZero(rtk_uint32 *pDrop); -ret_t rtl8367c_setAsicIGMPBypassStormCTRL(rtk_uint32 bypass); -ret_t rtl8367c_getAsicIGMPBypassStormCTRL(rtk_uint32 *pBypass); -ret_t rtl8367c_setAsicIGMPIsoLeaky(rtk_uint32 leaky); -ret_t rtl8367c_getAsicIGMPIsoLeaky(rtk_uint32 *pLeaky); -ret_t rtl8367c_setAsicIGMPVLANLeaky(rtk_uint32 leaky); -ret_t rtl8367c_getAsicIGMPVLANLeaky(rtk_uint32 *pLeaky); -ret_t rtl8367c_setAsicIGMPBypassGroup(rtk_uint32 bypassType, rtk_uint32 enabled); -ret_t rtl8367c_getAsicIGMPBypassGroup(rtk_uint32 bypassType, rtk_uint32 *pEnabled); - -#endif /*#ifndef _RTL8367C_ASICDRV_IGMP_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_inbwctrl.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_inbwctrl.h deleted file mode 100644 index 10f3545322..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_inbwctrl.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Ingress bandwidth control related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_INBWCTRL_H_ -#define _RTL8367C_ASICDRV_INBWCTRL_H_ - -#include - -extern ret_t rtl8367c_setAsicPortIngressBandwidth(rtk_uint32 port, rtk_uint32 bandwidth, rtk_uint32 preifg, rtk_uint32 enableFC); -extern ret_t rtl8367c_getAsicPortIngressBandwidth(rtk_uint32 port, rtk_uint32* pBandwidth, rtk_uint32* pPreifg, rtk_uint32* pEnableFC ); -extern ret_t rtl8367c_setAsicPortIngressBandwidthBypass(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortIngressBandwidthBypass(rtk_uint32* pEnabled); - - -#endif /*_RTL8367C_ASICDRV_INBWCTRL_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_interrupt.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_interrupt.h deleted file mode 100644 index 8b78014ab0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_interrupt.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Interrupt related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_INTERRUPT_H_ -#define _RTL8367C_ASICDRV_INTERRUPT_H_ - -#include - -typedef enum RTL8367C_INTR_IMRS_E -{ - IMRS_LINK_CHANGE, - IMRS_METER_EXCEED, - IMRS_L2_LEARN, - IMRS_SPEED_CHANGE, - IMRS_SPECIAL_CONGESTION, - IMRS_GREEN_FEATURE, - IMRS_LOOP_DETECTION, - IMRS_8051, - IMRS_CABLE_DIAG, - IMRS_ACL, - IMRS_RESERVED, /* Unused */ - IMRS_SLIENT, - IMRS_END, -}RTL8367C_INTR_IMRS; - -typedef enum RTL8367C_INTR_INDICATOR_E -{ - INTRST_L2_LEARN = 0, - INTRST_SPEED_CHANGE, - INTRST_SPECIAL_CONGESTION, - INTRST_PORT_LINKDOWN, - INTRST_PORT_LINKUP, - INTRST_METER0_15, - INTRST_METER16_31, - INTRST_RLDP_LOOPED, - INTRST_RLDP_RELEASED, - INTRST_SYS_LEARN, - INTRST_END, -}RTL8367C_INTR_INDICATOR; - -extern ret_t rtl8367c_setAsicInterruptPolarity(rtk_uint32 polarity); -extern ret_t rtl8367c_getAsicInterruptPolarity(rtk_uint32* pPolarity); -extern ret_t rtl8367c_setAsicInterruptMask(rtk_uint32 imr); -extern ret_t rtl8367c_getAsicInterruptMask(rtk_uint32* pImr); -extern ret_t rtl8367c_setAsicInterruptStatus(rtk_uint32 ims); -extern ret_t rtl8367c_getAsicInterruptStatus(rtk_uint32* pIms); -extern ret_t rtl8367c_setAsicInterruptRelatedStatus(rtk_uint32 type, rtk_uint32 status); -extern ret_t rtl8367c_getAsicInterruptRelatedStatus(rtk_uint32 type, rtk_uint32* pStatus); - - -#endif /*#ifndef _RTL8367C_ASICDRV_INTERRUPT_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_led.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_led.h deleted file mode 100644 index a7f8e20643..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_led.h +++ /dev/null @@ -1,138 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : LED related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_LED_H_ -#define _RTL8367C_ASICDRV_LED_H_ - -#include - -#define RTL8367C_LEDGROUPNO 3 -#define RTL8367C_LEDGROUPMASK 0x7 -#define RTL8367C_LED_FORCE_MODE_BASE RTL8367C_REG_CPU_FORCE_LED0_CFG0 -#define RTL8367C_LED_FORCE_CTRL RTL8367C_REG_CPU_FORCE_LED_CFG - -enum RTL8367C_LEDOP{ - - LEDOP_SCAN0=0, - LEDOP_SCAN1, - LEDOP_PARALLEL, - LEDOP_SERIAL, - LEDOP_END, -}; - -enum RTL8367C_LEDSERACT{ - - LEDSERACT_HIGH=0, - LEDSERACT_LOW, - LEDSERACT_MAX, -}; - -enum RTL8367C_LEDSER{ - - LEDSER_16G=0, - LEDSER_8G, - LEDSER_MAX, -}; - -enum RTL8367C_LEDCONF{ - - LEDCONF_LEDOFF=0, - LEDCONF_DUPCOL, - LEDCONF_LINK_ACT, - LEDCONF_SPD1000, - LEDCONF_SPD100, - LEDCONF_SPD10, - LEDCONF_SPD1000ACT, - LEDCONF_SPD100ACT, - LEDCONF_SPD10ACT, - LEDCONF_SPD10010ACT, - LEDCONF_LOOPDETECT, - LEDCONF_EEE, - LEDCONF_LINKRX, - LEDCONF_LINKTX, - LEDCONF_MASTER, - LEDCONF_ACT, - LEDCONF_END -}; - -enum RTL8367C_LEDBLINKRATE{ - - LEDBLINKRATE_32MS=0, - LEDBLINKRATE_64MS, - LEDBLINKRATE_128MS, - LEDBLINKRATE_256MS, - LEDBLINKRATE_512MS, - LEDBLINKRATE_1024MS, - LEDBLINKRATE_48MS, - LEDBLINKRATE_96MS, - LEDBLINKRATE_END, -}; - -enum RTL8367C_LEDFORCEMODE{ - - LEDFORCEMODE_NORMAL=0, - LEDFORCEMODE_BLINK, - LEDFORCEMODE_OFF, - LEDFORCEMODE_ON, - LEDFORCEMODE_END, -}; - -enum RTL8367C_LEDFORCERATE{ - - LEDFORCERATE_512MS=0, - LEDFORCERATE_1024MS, - LEDFORCERATE_2048MS, - LEDFORCERATE_NORMAL, - LEDFORCERATE_END, - -}; - -enum RTL8367C_LEDMODE -{ - RTL8367C_LED_MODE_0 = 0, - RTL8367C_LED_MODE_1, - RTL8367C_LED_MODE_2, - RTL8367C_LED_MODE_3, - RTL8367C_LED_MODE_END -}; - -extern ret_t rtl8367c_setAsicLedIndicateInfoConfig(rtk_uint32 ledno, rtk_uint32 config); -extern ret_t rtl8367c_getAsicLedIndicateInfoConfig(rtk_uint32 ledno, rtk_uint32* pConfig); -extern ret_t rtl8367c_setAsicForceLed(rtk_uint32 port, rtk_uint32 group, rtk_uint32 mode); -extern ret_t rtl8367c_getAsicForceLed(rtk_uint32 port, rtk_uint32 group, rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicForceGroupLed(rtk_uint32 groupmask, rtk_uint32 mode); -extern ret_t rtl8367c_getAsicForceGroupLed(rtk_uint32* groupmask, rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicLedBlinkRate(rtk_uint32 blinkRate); -extern ret_t rtl8367c_getAsicLedBlinkRate(rtk_uint32* pBlinkRate); -extern ret_t rtl8367c_setAsicLedForceBlinkRate(rtk_uint32 blinkRate); -extern ret_t rtl8367c_getAsicLedForceBlinkRate(rtk_uint32* pBlinkRate); -extern ret_t rtl8367c_setAsicLedGroupMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicLedGroupMode(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicLedGroupEnable(rtk_uint32 group, rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicLedGroupEnable(rtk_uint32 group, rtk_uint32 *portmask); -extern ret_t rtl8367c_setAsicLedOperationMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicLedOperationMode(rtk_uint32 *mode); -extern ret_t rtl8367c_setAsicLedSerialModeConfig(rtk_uint32 active, rtk_uint32 serimode); -extern ret_t rtl8367c_getAsicLedSerialModeConfig(rtk_uint32 *active, rtk_uint32 *serimode); -extern ret_t rtl8367c_setAsicLedOutputEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicLedOutputEnable(rtk_uint32 *ptr_enabled); -extern ret_t rtl8367c_setAsicLedSerialOutput(rtk_uint32 output, rtk_uint32 pmask); -extern ret_t rtl8367c_getAsicLedSerialOutput(rtk_uint32 *pOutput, rtk_uint32 *pPmask); - - -#endif /*#ifndef _RTL8367C_ASICDRV_LED_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_lut.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_lut.h deleted file mode 100644 index c94ea07601..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_lut.h +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : LUT related functions - * - */ - - -#ifndef _RTL8367C_ASICDRV_LUT_H_ -#define _RTL8367C_ASICDRV_LUT_H_ - -#include - -#define RTL8367C_LUT_AGETIMERMAX (7) -#define RTL8367C_LUT_AGESPEEDMAX (3) -#define RTL8367C_LUT_LEARNLIMITMAX (0x1040) -#define RTL8367C_LUT_ADDRMAX (0x103F) -#define RTL8367C_LUT_IPMCGRP_TABLE_MAX (0x3F) -#define RTL8367C_LUT_ENTRY_SIZE (6) -#define RTL8367C_LUT_BUSY_CHECK_NO (10) - -#define RTL8367C_LUT_TABLE_SIZE (6) - -enum RTL8367C_LUTHASHMETHOD{ - - LUTHASHMETHOD_SVL=0, - LUTHASHMETHOD_IVL, - LUTHASHMETHOD_END, -}; - - -enum RTL8367C_LRNOVERACT{ - - LRNOVERACT_FORWARD=0, - LRNOVERACT_DROP, - LRNOVERACT_TRAP, - LRNOVERACT_END, -}; - -enum RTL8367C_LUTREADMETHOD{ - - LUTREADMETHOD_MAC =0, - LUTREADMETHOD_ADDRESS, - LUTREADMETHOD_NEXT_ADDRESS, - LUTREADMETHOD_NEXT_L2UC, - LUTREADMETHOD_NEXT_L2MC, - LUTREADMETHOD_NEXT_L3MC, - LUTREADMETHOD_NEXT_L2L3MC, - LUTREADMETHOD_NEXT_L2UCSPA, -}; - -enum RTL8367C_FLUSHMODE -{ - FLUSHMDOE_PORT = 0, - FLUSHMDOE_VID, - FLUSHMDOE_FID, - FLUSHMDOE_END, -}; - -enum RTL8367C_FLUSHTYPE -{ - FLUSHTYPE_DYNAMIC = 0, - FLUSHTYPE_BOTH, - FLUSHTYPE_END, -}; - - -typedef struct LUTTABLE{ - - ipaddr_t sip; - ipaddr_t dip; - ether_addr_t mac; - rtk_uint16 ivl_svl:1; - rtk_uint16 cvid_fid:12; - rtk_uint16 fid:4; - rtk_uint16 efid:3; - - rtk_uint16 nosalearn:1; - rtk_uint16 da_block:1; - rtk_uint16 sa_block:1; - rtk_uint16 auth:1; - rtk_uint16 lut_pri:3; - rtk_uint16 sa_en:1; - rtk_uint16 fwd_en:1; - rtk_uint16 mbr:11; - rtk_uint16 spa:4; - rtk_uint16 age:3; - rtk_uint16 l3lookup:1; - rtk_uint16 igmp_asic:1; - rtk_uint16 igmpidx:8; - - rtk_uint16 lookup_hit:1; - rtk_uint16 lookup_busy:1; - rtk_uint16 address:13; - - rtk_uint16 l3vidlookup:1; - rtk_uint16 l3_vid:12; - - rtk_uint16 wait_time; - -}rtl8367c_luttb; - -extern ret_t rtl8367c_setAsicLutIpMulticastLookup(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicLutIpMulticastLookup(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicLutIpMulticastVidLookup(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicLutIpMulticastVidLookup(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicLutAgeTimerSpeed(rtk_uint32 timer, rtk_uint32 speed); -extern ret_t rtl8367c_getAsicLutAgeTimerSpeed(rtk_uint32* pTimer, rtk_uint32* pSpeed); -extern ret_t rtl8367c_setAsicLutCamTbUsage(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicLutCamTbUsage(rtk_uint32* pEnabled); -extern ret_t rtl8367c_getAsicLutCamType(rtk_uint32* pType); -extern ret_t rtl8367c_setAsicLutLearnLimitNo(rtk_uint32 port, rtk_uint32 number); -extern ret_t rtl8367c_getAsicLutLearnLimitNo(rtk_uint32 port, rtk_uint32* pNumber); -extern ret_t rtl8367c_setAsicSystemLutLearnLimitNo(rtk_uint32 number); -extern ret_t rtl8367c_getAsicSystemLutLearnLimitNo(rtk_uint32 *pNumber); -extern ret_t rtl8367c_setAsicLutLearnOverAct(rtk_uint32 action); -extern ret_t rtl8367c_getAsicLutLearnOverAct(rtk_uint32* pAction); -extern ret_t rtl8367c_setAsicSystemLutLearnOverAct(rtk_uint32 action); -extern ret_t rtl8367c_getAsicSystemLutLearnOverAct(rtk_uint32 *pAction); -extern ret_t rtl8367c_setAsicSystemLutLearnPortMask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicSystemLutLearnPortMask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicL2LookupTb(rtl8367c_luttb *pL2Table); -extern ret_t rtl8367c_getAsicL2LookupTb(rtk_uint32 method, rtl8367c_luttb *pL2Table); -extern ret_t rtl8367c_getAsicLutLearnNo(rtk_uint32 port, rtk_uint32* pNumber); -extern ret_t rtl8367c_setAsicLutIpLookupMethod(rtk_uint32 type); -extern ret_t rtl8367c_getAsicLutIpLookupMethod(rtk_uint32* pType); -extern ret_t rtl8367c_setAsicLutForceFlush(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicLutForceFlushStatus(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicLutFlushMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicLutFlushMode(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicLutFlushType(rtk_uint32 type); -extern ret_t rtl8367c_getAsicLutFlushType(rtk_uint32* pType); -extern ret_t rtl8367c_setAsicLutFlushVid(rtk_uint32 vid); -extern ret_t rtl8367c_getAsicLutFlushVid(rtk_uint32* pVid); -extern ret_t rtl8367c_setAsicLutFlushFid(rtk_uint32 fid); -extern ret_t rtl8367c_getAsicLutFlushFid(rtk_uint32* pFid); -extern ret_t rtl8367c_setAsicLutDisableAging(rtk_uint32 port, rtk_uint32 disabled); -extern ret_t rtl8367c_getAsicLutDisableAging(rtk_uint32 port, rtk_uint32 *pDisabled); -extern ret_t rtl8367c_setAsicLutIPMCGroup(rtk_uint32 index, ipaddr_t group_addr, rtk_uint32 vid, rtk_uint32 pmask, rtk_uint32 valid); -extern ret_t rtl8367c_getAsicLutIPMCGroup(rtk_uint32 index, ipaddr_t *pGroup_addr, rtk_uint32 *pVid, rtk_uint32 *pPmask, rtk_uint32 *pValid); -extern ret_t rtl8367c_setAsicLutLinkDownForceAging(rtk_uint32 enable); -extern ret_t rtl8367c_getAsicLutLinkDownForceAging(rtk_uint32 *pEnable); -extern ret_t rtl8367c_setAsicLutFlushAll(void); -extern ret_t rtl8367c_getAsicLutFlushAllStatus(rtk_uint32 *pBusyStatus); -extern ret_t rtl8367c_setAsicLutIpmcFwdRouterPort(rtk_uint32 enable); -extern ret_t rtl8367c_getAsicLutIpmcFwdRouterPort(rtk_uint32 *pEnable); - -#endif /*_RTL8367C_ASICDRV_LUT_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_meter.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_meter.h deleted file mode 100644 index ba761a94f8..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_meter.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Shared meter related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_METER_H_ -#define _RTL8367C_ASICDRV_METER_H_ - -#include - - -extern ret_t rtl8367c_setAsicShareMeter(rtk_uint32 index, rtk_uint32 rate, rtk_uint32 ifg); -extern ret_t rtl8367c_getAsicShareMeter(rtk_uint32 index, rtk_uint32 *pRate, rtk_uint32 *pIfg); -extern ret_t rtl8367c_setAsicShareMeterBucketSize(rtk_uint32 index, rtk_uint32 lbThreshold); -extern ret_t rtl8367c_getAsicShareMeterBucketSize(rtk_uint32 index, rtk_uint32 *pLbThreshold); -extern ret_t rtl8367c_setAsicShareMeterType(rtk_uint32 index, rtk_uint32 type); -extern ret_t rtl8367c_getAsicShareMeterType(rtk_uint32 index, rtk_uint32 *pType); -extern ret_t rtl8367c_setAsicMeterExceedStatus(rtk_uint32 index); -extern ret_t rtl8367c_getAsicMeterExceedStatus(rtk_uint32 index, rtk_uint32* pStatus); - -#endif /*_RTL8367C_ASICDRV_FC_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_mib.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_mib.h deleted file mode 100644 index ca46e0f470..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_mib.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : MIB related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_MIB_H_ -#define _RTL8367C_ASICDRV_MIB_H_ - -#include - -#define RTL8367C_MIB_PORT_OFFSET (0x7C) -#define RTL8367C_MIB_LEARNENTRYDISCARD_OFFSET (0x420) - -#define RTL8367C_MAX_LOG_CNT_NUM (32) -#define RTL8367C_MIB_MAX_LOG_CNT_IDX (RTL8367C_MAX_LOG_CNT_NUM - 1) -#define RTL8367C_MIB_LOG_CNT_OFFSET (0x3E0) -#define RTL8367C_MIB_MAX_LOG_MODE_IDX (16-1) - -typedef enum RTL8367C_MIBCOUNTER_E{ - - /* RX */ - ifInOctets = 0, - - dot3StatsFCSErrors, - dot3StatsSymbolErrors, - dot3InPauseFrames, - dot3ControlInUnknownOpcodes, - - etherStatsFragments, - etherStatsJabbers, - ifInUcastPkts, - etherStatsDropEvents, - - ifInMulticastPkts, - ifInBroadcastPkts, - inMldChecksumError, - inIgmpChecksumError, - inMldSpecificQuery, - inMldGeneralQuery, - inIgmpSpecificQuery, - inIgmpGeneralQuery, - inMldLeaves, - inIgmpLeaves, - - /* TX/RX */ - etherStatsOctets, - - etherStatsUnderSizePkts, - etherOversizeStats, - etherStatsPkts64Octets, - etherStatsPkts65to127Octets, - etherStatsPkts128to255Octets, - etherStatsPkts256to511Octets, - etherStatsPkts512to1023Octets, - etherStatsPkts1024to1518Octets, - - /* TX */ - ifOutOctets, - - dot3StatsSingleCollisionFrames, - dot3StatMultipleCollisionFrames, - dot3sDeferredTransmissions, - dot3StatsLateCollisions, - etherStatsCollisions, - dot3StatsExcessiveCollisions, - dot3OutPauseFrames, - ifOutDiscards, - - /* ALE */ - dot1dTpPortInDiscards, - ifOutUcastPkts, - ifOutMulticastPkts, - ifOutBroadcastPkts, - outOampduPkts, - inOampduPkts, - - inIgmpJoinsSuccess, - inIgmpJoinsFail, - inMldJoinsSuccess, - inMldJoinsFail, - inReportSuppressionDrop, - inLeaveSuppressionDrop, - outIgmpReports, - outIgmpLeaves, - outIgmpGeneralQuery, - outIgmpSpecificQuery, - outMldReports, - outMldLeaves, - outMldGeneralQuery, - outMldSpecificQuery, - inKnownMulticastPkts, - - /*Device only */ - dot1dTpLearnedEntryDiscards, - RTL8367C_MIBS_NUMBER, - -}RTL8367C_MIBCOUNTER; - - -extern ret_t rtl8367c_setAsicMIBsCounterReset(rtk_uint32 greset, rtk_uint32 qmreset, rtk_uint32 pmask); -extern ret_t rtl8367c_getAsicMIBsCounter(rtk_uint32 port,RTL8367C_MIBCOUNTER mibIdx, rtk_uint64* pCounter); -extern ret_t rtl8367c_getAsicMIBsLogCounter(rtk_uint32 index, rtk_uint32 *pCounter); -extern ret_t rtl8367c_getAsicMIBsControl(rtk_uint32* pMask); - -extern ret_t rtl8367c_setAsicMIBsResetValue(rtk_uint32 value); -extern ret_t rtl8367c_getAsicMIBsResetValue(rtk_uint32* value); - -extern ret_t rtl8367c_setAsicMIBsUsageMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicMIBsUsageMode(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicMIBsTimer(rtk_uint32 timer); -extern ret_t rtl8367c_getAsicMIBsTimer(rtk_uint32* pTimer); -extern ret_t rtl8367c_setAsicMIBsLoggingMode(rtk_uint32 index, rtk_uint32 mode); -extern ret_t rtl8367c_getAsicMIBsLoggingMode(rtk_uint32 index, rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicMIBsLoggingType(rtk_uint32 index, rtk_uint32 type); -extern ret_t rtl8367c_getAsicMIBsLoggingType(rtk_uint32 index, rtk_uint32* pType); -extern ret_t rtl8367c_setAsicMIBsResetLoggingCounter(rtk_uint32 index); -extern ret_t rtl8367c_setAsicMIBsLength(rtk_uint32 txLengthMode, rtk_uint32 rxLengthMode); -extern ret_t rtl8367c_getAsicMIBsLength(rtk_uint32 *pTxLengthMode, rtk_uint32 *pRxLengthMode); - -#endif /*#ifndef _RTL8367C_ASICDRV_MIB_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_mirror.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_mirror.h deleted file mode 100644 index 23b788d7a6..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_mirror.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port mirror related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_MIRROR_H_ -#define _RTL8367C_ASICDRV_MIRROR_H_ - -#include - -extern ret_t rtl8367c_setAsicPortMirror(rtk_uint32 source, rtk_uint32 monitor); -extern ret_t rtl8367c_getAsicPortMirror(rtk_uint32 *pSource, rtk_uint32 *pMonitor); -extern ret_t rtl8367c_setAsicPortMirrorRxFunction(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorRxFunction(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorTxFunction(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorTxFunction(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorIsolation(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorIsolation(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorPriority(rtk_uint32 priority); -extern ret_t rtl8367c_getAsicPortMirrorPriority(rtk_uint32* pPriority); -extern ret_t rtl8367c_setAsicPortMirrorMask(rtk_uint32 SourcePortmask); -extern ret_t rtl8367c_getAsicPortMirrorMask(rtk_uint32 *pSourcePortmask); -extern ret_t rtl8367c_setAsicPortMirrorVlanRxLeaky(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorVlanRxLeaky(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorVlanTxLeaky(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorVlanTxLeaky(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorIsolationRxLeaky(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorIsolationRxLeaky(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorIsolationTxLeaky(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortMirrorIsolationTxLeaky(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicPortMirrorRealKeep(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicPortMirrorRealKeep(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicPortMirrorOverride(rtk_uint32 rxMirror, rtk_uint32 txMirror, rtk_uint32 aclMirror); -extern ret_t rtl8367c_getAsicPortMirrorOverride(rtk_uint32 *pRxMirror, rtk_uint32 *pTxMirror, rtk_uint32 *pAclMirror); - -#endif /*#ifndef _RTL8367C_ASICDRV_MIRROR_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_misc.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_misc.h deleted file mode 100644 index c666a7b58b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_misc.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Miscellaneous functions - * - */ - -#ifndef _RTL8367C_ASICDRV_MISC_H_ -#define _RTL8367C_ASICDRV_MISC_H_ - -#include - -extern ret_t rtl8367c_setAsicMacAddress(ether_addr_t mac); -extern ret_t rtl8367c_getAsicMacAddress(ether_addr_t *pMac); -extern ret_t rtl8367c_getAsicDebugInfo(rtk_uint32 port, rtk_uint32 *pDebugifo); -extern ret_t rtl8367c_setAsicPortJamMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicPortJamMode(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicMaxLengthCfg(rtk_uint32 cfgId, rtk_uint32 maxLength); -extern ret_t rtl8367c_getAsicMaxLengthCfg(rtk_uint32 cfgId, rtk_uint32 *pMaxLength); -extern ret_t rtl8367c_setAsicMaxLength(rtk_uint32 port, rtk_uint32 type, rtk_uint32 cfgId); -extern ret_t rtl8367c_getAsicMaxLength(rtk_uint32 port, rtk_uint32 type, rtk_uint32 *pCfgId); - -#endif /*_RTL8367C_ASICDRV_MISC_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_oam.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_oam.h deleted file mode 100644 index c09dc76988..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_oam.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 42321 $ - * $Date: 2013-08-26 13:51:29 +0800 (¶g¤@, 26 ¤K¤ë 2013) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : OAM related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_OAM_H_ -#define _RTL8367C_ASICDRV_OAM_H_ - -#include - -enum OAMPARACT -{ - OAM_PARFWD = 0, - OAM_PARLB, - OAM_PARDISCARD, - OAM_PARFWDCPU -}; - -enum OAMMULACT -{ - OAM_MULFWD = 0, - OAM_MULDISCARD, - OAM_MULCPU -}; - -extern ret_t rtl8367c_setAsicOamParser(rtk_uint32 port, rtk_uint32 parser); -extern ret_t rtl8367c_getAsicOamParser(rtk_uint32 port, rtk_uint32* pParser); -extern ret_t rtl8367c_setAsicOamMultiplexer(rtk_uint32 port, rtk_uint32 multiplexer); -extern ret_t rtl8367c_getAsicOamMultiplexer(rtk_uint32 port, rtk_uint32* pMultiplexer); -extern ret_t rtl8367c_setAsicOamCpuPri(rtk_uint32 priority); -extern ret_t rtl8367c_getAsicOamCpuPri(rtk_uint32 *pPriority); -extern ret_t rtl8367c_setAsicOamEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicOamEnable(rtk_uint32 *pEnabled); -#endif /*_RTL8367C_ASICDRV_OAM_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_phy.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_phy.h deleted file mode 100644 index e993d6edf7..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_phy.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : PHY related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_PHY_H_ -#define _RTL8367C_ASICDRV_PHY_H_ - -#include - -#define RTL8367C_PHY_REGNOMAX 0x1F -#define RTL8367C_PHY_EXTERNALMAX 0x7 - -#define RTL8367C_PHY_BASE 0x2000 -#define RTL8367C_PHY_EXT_BASE 0xA000 - -#define RTL8367C_PHY_OFFSET 5 -#define RTL8367C_PHY_EXT_OFFSET 9 - -#define RTL8367C_PHY_PAGE_ADDRESS 31 - - -extern ret_t rtl8367c_setAsicPHYReg(rtk_uint32 phyNo, rtk_uint32 phyAddr, rtk_uint32 regData ); -extern ret_t rtl8367c_getAsicPHYReg(rtk_uint32 phyNo, rtk_uint32 phyAddr, rtk_uint32* pRegData ); -extern ret_t rtl8367c_setAsicPHYOCPReg(rtk_uint32 phyNo, rtk_uint32 ocpAddr, rtk_uint32 ocpData ); -extern ret_t rtl8367c_getAsicPHYOCPReg(rtk_uint32 phyNo, rtk_uint32 ocpAddr, rtk_uint32 *pRegData ); -extern ret_t rtl8367c_setAsicSdsReg(rtk_uint32 sdsId, rtk_uint32 sdsReg, rtk_uint32 sdsPage, rtk_uint32 value); -extern ret_t rtl8367c_getAsicSdsReg(rtk_uint32 sdsId, rtk_uint32 sdsReg, rtk_uint32 sdsPage, rtk_uint32 *value); - -#endif /*#ifndef _RTL8367C_ASICDRV_PHY_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_port.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_port.h deleted file mode 100644 index ad99d8560b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_port.h +++ /dev/null @@ -1,237 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76333 $ - * $Date: 2017-03-09 09:33:15 +0800 (¶g¥|, 09 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port security related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_PORTSECURITY_H_ -#define _RTL8367C_ASICDRV_PORTSECURITY_H_ - -#include -#include -#include - -/****************************************************************/ -/* Type Definition */ -/****************************************************************/ - -#define RTL8367C_MAC7 7 -#define RTL8367C_EXTNO 3 - -#define RTL8367C_RTCT_PAGE (11) -#define RTL8367C_RTCT_RESULT_A_REG (27) -#define RTL8367C_RTCT_RESULT_B_REG (28) -#define RTL8367C_RTCT_RESULT_C_REG (29) -#define RTL8367C_RTCT_RESULT_D_REG (30) -#define RTL8367C_RTCT_STATUS_REG (26) - -enum L2_SECURITY_BEHAVE -{ - L2_BEHAVE_FLOODING = 0, - L2_BEHAVE_DROP, - L2_BEHAVE_TRAP, - L2_BEHAVE_END -}; - -enum L2_UNDA_BEHAVE -{ - L2_UNDA_BEHAVE_FLOODING_PMASK = 0, - L2_UNDA_BEHAVE_DROP, - L2_UNDA_BEHAVE_TRAP, - L2_UNDA_BEHAVE_FLOODING, - L2_UNDA_BEHAVE_END -}; - -enum L2_SECURITY_SA_BEHAVE -{ - L2_BEHAVE_SA_FLOODING = 0, - L2_BEHAVE_SA_DROP, - L2_BEHAVE_SA_TRAP, - L2_BEHAVE_SA_COPY28051, - L2_BEHAVE_SA_END -}; - -/* enum for port current link speed */ -enum SPEEDMODE -{ - SPD_10M = 0, - SPD_100M, - SPD_1000M, - SPD_2500M -}; - -/* enum for mac link mode */ -enum LINKMODE -{ - MAC_NORMAL = 0, - MAC_FORCE, -}; - -/* enum for port current link duplex mode */ -enum DUPLEXMODE -{ - HALF_DUPLEX = 0, - FULL_DUPLEX -}; - -/* enum for port current MST mode */ -enum MSTMODE -{ - SLAVE_MODE= 0, - MASTER_MODE -}; - - -enum EXTMODE -{ - EXT_DISABLE = 0, - EXT_RGMII, - EXT_MII_MAC, - EXT_MII_PHY, - EXT_TMII_MAC, - EXT_TMII_PHY, - EXT_GMII, - EXT_RMII_MAC, - EXT_RMII_PHY, - EXT_SGMII, - EXT_HSGMII, - EXT_1000X_100FX, - EXT_1000X, - EXT_100FX, - EXT_RGMII_2, - EXT_MII_MAC_2, - EXT_MII_PHY_2, - EXT_TMII_MAC_2, - EXT_TMII_PHY_2, - EXT_RMII_MAC_2, - EXT_RMII_PHY_2, - EXT_END -}; - -enum DOSTYPE -{ - DOS_DAEQSA = 0, - DOS_LANDATTACKS, - DOS_BLATATTACKS, - DOS_SYNFINSCAN, - DOS_XMASCAN, - DOS_NULLSCAN, - DOS_SYN1024, - DOS_TCPSHORTHDR, - DOS_TCPFRAGERROR, - DOS_ICMPFRAGMENT, - DOS_END, - -}; - -typedef struct rtl8367c_port_ability_s{ - rtk_uint16 forcemode; - rtk_uint16 mstfault; - rtk_uint16 mstmode; - rtk_uint16 nway; - rtk_uint16 txpause; - rtk_uint16 rxpause; - rtk_uint16 link; - rtk_uint16 duplex; - rtk_uint16 speed; -}rtl8367c_port_ability_t; - -typedef struct rtl8367c_port_status_s{ - - rtk_uint16 lpi1000; - rtk_uint16 lpi100; - rtk_uint16 mstfault; - rtk_uint16 mstmode; - rtk_uint16 nway; - rtk_uint16 txpause; - rtk_uint16 rxpause; - rtk_uint16 link; - rtk_uint16 duplex; - rtk_uint16 speed; - -}rtl8367c_port_status_t; - -typedef struct rtct_result_s -{ - rtk_uint32 channelAShort; - rtk_uint32 channelBShort; - rtk_uint32 channelCShort; - rtk_uint32 channelDShort; - - rtk_uint32 channelAOpen; - rtk_uint32 channelBOpen; - rtk_uint32 channelCOpen; - rtk_uint32 channelDOpen; - - rtk_uint32 channelAMismatch; - rtk_uint32 channelBMismatch; - rtk_uint32 channelCMismatch; - rtk_uint32 channelDMismatch; - - rtk_uint32 channelALinedriver; - rtk_uint32 channelBLinedriver; - rtk_uint32 channelCLinedriver; - rtk_uint32 channelDLinedriver; - - rtk_uint32 channelALen; - rtk_uint32 channelBLen; - rtk_uint32 channelCLen; - rtk_uint32 channelDLen; -} rtl8367c_port_rtct_result_t; - - -/****************************************************************/ -/* Driver Proto Type Definition */ -/****************************************************************/ -extern ret_t rtl8367c_setAsicPortUnknownDaBehavior(rtk_uint32 port, rtk_uint32 behavior); -extern ret_t rtl8367c_getAsicPortUnknownDaBehavior(rtk_uint32 port, rtk_uint32 *pBehavior); -extern ret_t rtl8367c_setAsicPortUnknownSaBehavior(rtk_uint32 behavior); -extern ret_t rtl8367c_getAsicPortUnknownSaBehavior(rtk_uint32 *pBehavior); -extern ret_t rtl8367c_setAsicPortUnmatchedSaBehavior(rtk_uint32 behavior); -extern ret_t rtl8367c_getAsicPortUnmatchedSaBehavior(rtk_uint32 *pBehavior); -extern ret_t rtl8367c_setAsicPortUnmatchedSaMoving(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortUnmatchedSaMoving(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicPortUnknownDaFloodingPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicPortUnknownDaFloodingPortmask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicPortUnknownMulticastFloodingPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicPortUnknownMulticastFloodingPortmask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicPortBcastFloodingPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicPortBcastFloodingPortmask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicPortBlockSpa(rtk_uint32 port, rtk_uint32 block); -extern ret_t rtl8367c_getAsicPortBlockSpa(rtk_uint32 port, rtk_uint32 *pBlock); -extern ret_t rtl8367c_setAsicPortForceLink(rtk_uint32 port, rtl8367c_port_ability_t *pPortAbility); -extern ret_t rtl8367c_getAsicPortForceLink(rtk_uint32 port, rtl8367c_port_ability_t *pPortAbility); -extern ret_t rtl8367c_getAsicPortStatus(rtk_uint32 port, rtl8367c_port_status_t *pPortStatus); -extern ret_t rtl8367c_setAsicPortForceLinkExt(rtk_uint32 id, rtl8367c_port_ability_t *pPortAbility); -extern ret_t rtl8367c_getAsicPortForceLinkExt(rtk_uint32 id, rtl8367c_port_ability_t *pPortAbility); -extern ret_t rtl8367c_setAsicPortExtMode(rtk_uint32 id, rtk_uint32 mode); -extern ret_t rtl8367c_getAsicPortExtMode(rtk_uint32 id, rtk_uint32 *pMode); -extern ret_t rtl8367c_setAsicPortDos(rtk_uint32 type, rtk_uint32 drop); -extern ret_t rtl8367c_getAsicPortDos(rtk_uint32 type, rtk_uint32* pDrop); -extern ret_t rtl8367c_setAsicPortEnableAll(rtk_uint32 enable); -extern ret_t rtl8367c_getAsicPortEnableAll(rtk_uint32 *pEnable); -extern ret_t rtl8367c_setAsicPortSmallIpg(rtk_uint32 port, rtk_uint32 enable); -extern ret_t rtl8367c_getAsicPortSmallIpg(rtk_uint32 port, rtk_uint32* pEnable); -extern ret_t rtl8367c_setAsicPortLoopback(rtk_uint32 port, rtk_uint32 enable); -extern ret_t rtl8367c_getAsicPortLoopback(rtk_uint32 port, rtk_uint32 *pEnable); -extern ret_t rtl8367c_setAsicPortRTCTEnable(rtk_uint32 portmask); -extern ret_t rtl8367c_setAsicPortRTCTDisable(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicPortRTCTResult(rtk_uint32 port, rtl8367c_port_rtct_result_t *pResult); -extern ret_t rtl8367c_sdsReset(rtk_uint32 id); -extern ret_t rtl8367c_getSdsLinkStatus(rtk_uint32 ext_id, rtk_uint32 *pSignalDetect, rtk_uint32 *pSync, rtk_uint32 *pLink); -extern ret_t rtl8367c_setSgmiiNway(rtk_uint32 ext_id, rtk_uint32 state); -extern ret_t rtl8367c_getSgmiiNway(rtk_uint32 ext_id, rtk_uint32 *pState); - -#endif /*_RTL8367C_ASICDRV_PORTSECURITY_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_portIsolation.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_portIsolation.h deleted file mode 100644 index e23d88e81f..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_portIsolation.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port isolation related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_PORTISOLATION_H_ -#define _RTL8367C_ASICDRV_PORTISOLATION_H_ - -#include - -extern ret_t rtl8367c_setAsicPortIsolationPermittedPortmask(rtk_uint32 port, rtk_uint32 permitPortmask); -extern ret_t rtl8367c_getAsicPortIsolationPermittedPortmask(rtk_uint32 port, rtk_uint32 *pPermitPortmask); -extern ret_t rtl8367c_setAsicPortIsolationEfid(rtk_uint32 port, rtk_uint32 efid); -extern ret_t rtl8367c_getAsicPortIsolationEfid(rtk_uint32 port, rtk_uint32 *pEfid); - -#endif /*_RTL8367C_ASICDRV_PORTISOLATION_H_*/ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_qos.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_qos.h deleted file mode 100644 index 26042bfa13..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_qos.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Qos related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_QOS_H_ -#define _RTL8367C_ASICDRV_QOS_H_ - -#include - -#define RTL8367C_DECISIONPRIMAX 0xFF - -/* enum Priority Selection Types */ -enum PRIDECISION -{ - PRIDEC_PORT = 0, - PRIDEC_ACL, - PRIDEC_DSCP, - PRIDEC_1Q, - PRIDEC_1AD, - PRIDEC_CVLAN, - PRIDEC_DA, - PRIDEC_SA, - PRIDEC_END, -}; - -/* enum Priority Selection Index */ -enum RTL8367C_PRIDEC_TABLE -{ - PRIDEC_IDX0 = 0, - PRIDEC_IDX1, - PRIDEC_IDX_END, -}; - -enum RTL8367C_DOT1P_PRISEL -{ - DOT1P_PRISEL_USER = 0, - DOT1P_PRISEL_TAG, - DOT1P_PRISEL_END -}; - -enum RTL8367C_DSCP_PRISEL -{ - DSCP_PRISEL_INTERNAL = 0, - DSCP_PRISEL_DSCP, - DSCP_PRISEL_USER , - DSCP_PRISEL_END -}; - - -extern ret_t rtl8367c_setAsicRemarkingDot1pAbility(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRemarkingDot1pAbility(rtk_uint32 port, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicRemarkingDot1pParameter(rtk_uint32 priority, rtk_uint32 newPriority ); -extern ret_t rtl8367c_getAsicRemarkingDot1pParameter(rtk_uint32 priority, rtk_uint32 *pNewPriority ); -extern ret_t rtl8367c_setAsicRemarkingDot1pSrc(rtk_uint32 type); -extern ret_t rtl8367c_getAsicRemarkingDot1pSrc(rtk_uint32 *pType); -extern ret_t rtl8367c_setAsicRemarkingDscpAbility(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRemarkingDscpAbility(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicRemarkingDscpParameter(rtk_uint32 priority, rtk_uint32 newDscp ); -extern ret_t rtl8367c_getAsicRemarkingDscpParameter(rtk_uint32 priority, rtk_uint32* pNewDscp ); - -extern ret_t rtl8367c_setAsicPriorityDot1qRemapping(rtk_uint32 srcpriority, rtk_uint32 priority ); -extern ret_t rtl8367c_getAsicPriorityDot1qRemapping(rtk_uint32 srcpriority, rtk_uint32 *pPriority ); -extern ret_t rtl8367c_setAsicPriorityDscpBased(rtk_uint32 dscp, rtk_uint32 priority ); -extern ret_t rtl8367c_getAsicPriorityDscpBased(rtk_uint32 dscp, rtk_uint32 *pPriority ); -extern ret_t rtl8367c_setAsicPriorityPortBased(rtk_uint32 port, rtk_uint32 priority ); -extern ret_t rtl8367c_getAsicPriorityPortBased(rtk_uint32 port, rtk_uint32 *pPriority ); -extern ret_t rtl8367c_setAsicPriorityDecision(rtk_uint32 index, rtk_uint32 prisrc, rtk_uint32 decisionPri); -extern ret_t rtl8367c_getAsicPriorityDecision(rtk_uint32 index, rtk_uint32 prisrc, rtk_uint32* pDecisionPri); -extern ret_t rtl8367c_setAsicPriorityToQIDMappingTable(rtk_uint32 qnum, rtk_uint32 priority, rtk_uint32 qid ); -extern ret_t rtl8367c_getAsicPriorityToQIDMappingTable(rtk_uint32 qnum, rtk_uint32 priority, rtk_uint32* pQid); -extern ret_t rtl8367c_setAsicOutputQueueMappingIndex(rtk_uint32 port, rtk_uint32 qnum ); -extern ret_t rtl8367c_getAsicOutputQueueMappingIndex(rtk_uint32 port, rtk_uint32 *pQnum ); - -extern ret_t rtl8367c_setAsicRemarkingDscpSrc(rtk_uint32 type); -extern ret_t rtl8367c_getAsicRemarkingDscpSrc(rtk_uint32 *pType); -extern ret_t rtl8367c_setAsicRemarkingDscp2Dscp(rtk_uint32 dscp, rtk_uint32 rmkDscp); -extern ret_t rtl8367c_getAsicRemarkingDscp2Dscp(rtk_uint32 dscp, rtk_uint32 *pRmkDscp); - -extern ret_t rtl8367c_setAsicPortPriorityDecisionIndex(rtk_uint32 port, rtk_uint32 index ); -extern ret_t rtl8367c_getAsicPortPriorityDecisionIndex(rtk_uint32 port, rtk_uint32 *pIndex ); - -#endif /*#ifndef _RTL8367C_ASICDRV_QOS_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_rldp.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_rldp.h deleted file mode 100644 index cde970b638..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_rldp.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 42321 $ - * $Date: 2013-08-26 13:51:29 +0800 (¶g¤@, 26 ¤K¤ë 2013) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : RLDP related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_RLDP_H_ -#define _RTL8367C_ASICDRV_RLDP_H_ - -#include -#include - -extern ret_t rtl8367c_setAsicRldp(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRldp(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicRldpEnable8051(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRldpEnable8051(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicRldpCompareRandomNumber(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRldpCompareRandomNumber(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicRldpIndicatorSource(rtk_uint32 src); -extern ret_t rtl8367c_getAsicRldpIndicatorSource(rtk_uint32 *pSrc); -extern ret_t rtl8367c_setAsicRldpCheckingStatePara(rtk_uint32 retryCount, rtk_uint32 retryPeriod); -extern ret_t rtl8367c_getAsicRldpCheckingStatePara(rtk_uint32 *pRetryCount, rtk_uint32 *pRetryPeriod); -extern ret_t rtl8367c_setAsicRldpLoopStatePara(rtk_uint32 retryCount, rtk_uint32 retryPeriod); -extern ret_t rtl8367c_getAsicRldpLoopStatePara(rtk_uint32 *pRetryCount, rtk_uint32 *pRetryPeriod); -extern ret_t rtl8367c_setAsicRldpTxPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicRldpTxPortmask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicRldpMagicNum(ether_addr_t seed); -extern ret_t rtl8367c_getAsicRldpMagicNum(ether_addr_t *pSeed); -extern ret_t rtl8367c_getAsicRldpLoopedPortmask(rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicRldp8051Portmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicRldp8051Portmask(rtk_uint32 *pPortmask); - - -extern ret_t rtl8367c_getAsicRldpRandomNumber(ether_addr_t *pRandNumber); -extern ret_t rtl8367c_getAsicRldpLoopedPortPair(rtk_uint32 port, rtk_uint32 *pLoopedPair); -extern ret_t rtl8367c_setAsicRlppTrap8051(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRlppTrap8051(rtk_uint32 *pEnabled); - -extern ret_t rtl8367c_setAsicRldpLeaveLoopedPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicRldpLeaveLoopedPortmask(rtk_uint32 *pPortmask); - -extern ret_t rtl8367c_setAsicRldpEnterLoopedPortmask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicRldpEnterLoopedPortmask(rtk_uint32 *pPortmask); - -extern ret_t rtl8367c_setAsicRldpTriggerMode(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicRldpTriggerMode(rtk_uint32 *pEnabled); - -#endif /*_RTL8367C_ASICDRV_RLDP_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_rma.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_rma.h deleted file mode 100644 index 10c707544f..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_rma.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 64716 $ - * $Date: 2015-12-31 16:31:55 +0800 (¶g¥|, 31 ¤Q¤G¤ë 2015) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : RMA related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_RMA_H_ -#define _RTL8367C_ASICDRV_RMA_H_ - -#include - -#define RTL8367C_RMAMAX 0x2F - -enum RTL8367C_RMAOP -{ - RMAOP_FORWARD = 0, - RMAOP_TRAP_TO_CPU, - RMAOP_DROP, - RMAOP_FORWARD_EXCLUDE_CPU, - RMAOP_END -}; - - -typedef struct rtl8367c_rma_s{ - - rtk_uint16 operation; - rtk_uint16 discard_storm_filter; - rtk_uint16 trap_priority; - rtk_uint16 keep_format; - rtk_uint16 vlan_leaky; - rtk_uint16 portiso_leaky; - -}rtl8367c_rma_t; - - -extern ret_t rtl8367c_setAsicRma(rtk_uint32 index, rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_getAsicRma(rtk_uint32 index, rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_setAsicRmaCdp(rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_getAsicRmaCdp(rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_setAsicRmaCsstp(rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_getAsicRmaCsstp(rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_setAsicRmaLldp(rtk_uint32 enabled, rtl8367c_rma_t* pRmacfg); -extern ret_t rtl8367c_getAsicRmaLldp(rtk_uint32 *pEnabled, rtl8367c_rma_t* pRmacfg); - -#endif /*#ifndef _RTL8367C_ASICDRV_RMA_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_scheduling.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_scheduling.h deleted file mode 100644 index 919a4ca692..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_scheduling.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Packet Scheduling related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_SCHEDULING_H_ -#define _RTL8367C_ASICDRV_SCHEDULING_H_ - -#include - -#define RTL8367C_QWEIGHTMAX 0x7F -#define RTL8367C_PORT_QUEUE_METER_INDEX_MAX 7 - -/* enum for queue type */ -enum QUEUETYPE -{ - QTYPE_STRICT = 0, - QTYPE_WFQ, -}; -extern ret_t rtl8367c_setAsicLeakyBucketParameter(rtk_uint32 tick, rtk_uint32 token); -extern ret_t rtl8367c_getAsicLeakyBucketParameter(rtk_uint32 *tick, rtk_uint32 *token); -extern ret_t rtl8367c_setAsicAprMeter(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 apridx); -extern ret_t rtl8367c_getAsicAprMeter(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 *apridx); -extern ret_t rtl8367c_setAsicPprMeter(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 ppridx); -extern ret_t rtl8367c_getAsicPprMeter(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 *ppridx); -extern ret_t rtl8367c_setAsicAprEnable(rtk_uint32 port, rtk_uint32 aprEnable); -extern ret_t rtl8367c_getAsicAprEnable(rtk_uint32 port, rtk_uint32 *aprEnable); -extern ret_t rtl8367c_setAsicPprEnable(rtk_uint32 port, rtk_uint32 pprEnable); -extern ret_t rtl8367c_getAsicPprEnable(rtk_uint32 port, rtk_uint32 *pprEnable); - -extern ret_t rtl8367c_setAsicWFQWeight(rtk_uint32, rtk_uint32 queueid, rtk_uint32 weight ); -extern ret_t rtl8367c_getAsicWFQWeight(rtk_uint32, rtk_uint32 queueid, rtk_uint32 *weight ); -extern ret_t rtl8367c_setAsicWFQBurstSize(rtk_uint32 burstsize); -extern ret_t rtl8367c_getAsicWFQBurstSize(rtk_uint32 *burstsize); - -extern ret_t rtl8367c_setAsicQueueType(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 queueType); -extern ret_t rtl8367c_getAsicQueueType(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 *queueType); -extern ret_t rtl8367c_setAsicQueueRate(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 ppridx, rtk_uint32 apridx ); -extern ret_t rtl8367c_getAsicQueueRate(rtk_uint32 port, rtk_uint32 qid, rtk_uint32* ppridx, rtk_uint32* apridx ); -extern ret_t rtl8367c_setAsicPortEgressRate(rtk_uint32 port, rtk_uint32 rate); -extern ret_t rtl8367c_getAsicPortEgressRate(rtk_uint32 port, rtk_uint32 *rate); -extern ret_t rtl8367c_setAsicPortEgressRateIfg(rtk_uint32 ifg); -extern ret_t rtl8367c_getAsicPortEgressRateIfg(rtk_uint32 *ifg); - -#endif /*_RTL8367C_ASICDRV_SCHEDULING_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_storm.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_storm.h deleted file mode 100644 index 3865b5225a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_storm.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Storm control filtering related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_STORM_H_ -#define _RTL8367C_ASICDRV_STORM_H_ - -#include - -extern ret_t rtl8367c_setAsicStormFilterBroadcastEnable(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterBroadcastEnable(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterBroadcastMeter(rtk_uint32 port, rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterBroadcastMeter(rtk_uint32 port, rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterMulticastEnable(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterMulticastEnable(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterMulticastMeter(rtk_uint32 port, rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterMulticastMeter(rtk_uint32 port, rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterUnknownMulticastEnable(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterUnknownMulticastEnable(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterUnknownMulticastMeter(rtk_uint32 port, rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterUnknownMulticastMeter(rtk_uint32 port, rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterUnknownUnicastEnable(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterUnknownUnicastEnable(rtk_uint32 port, rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterUnknownUnicastMeter(rtk_uint32 port, rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterUnknownUnicastMeter(rtk_uint32 port, rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterExtBroadcastMeter(rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterExtBroadcastMeter(rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterExtMulticastMeter(rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterExtMulticastMeter(rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterExtUnknownMulticastMeter(rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterExtUnknownMulticastMeter(rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterExtUnknownUnicastMeter(rtk_uint32 meter); -extern ret_t rtl8367c_getAsicStormFilterExtUnknownUnicastMeter(rtk_uint32 *pMeter); -extern ret_t rtl8367c_setAsicStormFilterExtBroadcastEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterExtBroadcastEnable(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterExtMulticastEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterExtMulticastEnable(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterExtUnknownMulticastEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterExtUnknownMulticastEnable(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterExtUnknownUnicastEnable(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicStormFilterExtUnknownUnicastEnable(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_setAsicStormFilterExtEnablePortMask(rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicStormFilterExtEnablePortMask(rtk_uint32 *pPortmask); - - -#endif /*_RTL8367C_ASICDRV_STORM_H_*/ - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_svlan.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_svlan.h deleted file mode 100644 index 5a6a4a8329..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_svlan.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : SVLAN related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_SVLAN_H_ -#define _RTL8367C_ASICDRV_SVLAN_H_ - -#include - -#define RTL8367C_C2SIDXNO 128 -#define RTL8367C_C2SIDXMAX (RTL8367C_C2SIDXNO-1) -#define RTL8367C_MC2SIDXNO 32 -#define RTL8367C_MC2SIDXMAX (RTL8367C_MC2SIDXNO-1) -#define RTL8367C_SP2CIDXNO 128 -#define RTL8367C_SP2CMAX (RTL8367C_SP2CIDXNO-1) - -#define RTL8367C_SVLAN_MEMCONF_LEN 4 -#define RTL8367C_SVLAN_MC2S_LEN 5 -#define RTL8367C_SVLAN_SP2C_LEN 2 - -enum RTL8367C_SPRISEL -{ - SPRISEL_INTERNALPRI = 0, - SPRISEL_CTAGPRI, - SPRISEL_VSPRI, - SPRISEL_PBPRI, - SPRISEL_END -}; - -enum RTL8367C_SUNACCEPT -{ - SUNACCEPT_DROP = 0, - SUNACCEPT_TRAP, - SUNACCEPT_SVLAN, - SUNACCEPT_END -}; - -enum RTL8367C_SVLAN_MC2S_MODE -{ - SVLAN_MC2S_MODE_MAC = 0, - SVLAN_MC2S_MODE_IP, - SVLAN_MC2S_MODE_END -}; - - -typedef struct rtl8367c_svlan_memconf_s{ - - rtk_uint16 vs_member:11; - rtk_uint16 vs_untag:11; - - rtk_uint16 vs_fid_msti:4; - rtk_uint16 vs_priority:3; - rtk_uint16 vs_force_fid:1; - rtk_uint16 reserved:8; - - rtk_uint16 vs_svid:12; - rtk_uint16 vs_efiden:1; - rtk_uint16 vs_efid:3; - - -}rtl8367c_svlan_memconf_t; - - -typedef struct rtl8367c_svlan_mc2s_s{ - - rtk_uint16 valid:1; - rtk_uint16 format:1; - rtk_uint16 svidx:6; - rtk_uint32 sdata; - rtk_uint32 smask; -}rtl8367c_svlan_mc2s_t; - - -typedef struct rtl8367c_svlan_s2c_s{ - - rtk_uint16 valid:1; - rtk_uint16 svidx:6; - rtk_uint16 dstport:4; - rtk_uint32 vid:12; -}rtl8367c_svlan_s2c_t; - -extern ret_t rtl8367c_setAsicSvlanIngressUntag(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicSvlanIngressUntag(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicSvlanIngressUnmatch(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicSvlanIngressUnmatch(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicSvlanTrapPriority(rtk_uint32 priority); -extern ret_t rtl8367c_getAsicSvlanTrapPriority(rtk_uint32* pPriority); -extern ret_t rtl8367c_setAsicSvlanDefaultVlan(rtk_uint32 port, rtk_uint32 index); -extern ret_t rtl8367c_getAsicSvlanDefaultVlan(rtk_uint32 port, rtk_uint32* pIndex); - -extern ret_t rtl8367c_setAsicSvlanMemberConfiguration(rtk_uint32 index,rtl8367c_svlan_memconf_t* pSvlanMemCfg); -extern ret_t rtl8367c_getAsicSvlanMemberConfiguration(rtk_uint32 index,rtl8367c_svlan_memconf_t* pSvlanMemCfg); - -extern ret_t rtl8367c_setAsicSvlanPrioritySel(rtk_uint32 priSel); -extern ret_t rtl8367c_getAsicSvlanPrioritySel(rtk_uint32* pPriSel); -extern ret_t rtl8367c_setAsicSvlanTpid(rtk_uint32 protocolType); -extern ret_t rtl8367c_getAsicSvlanTpid(rtk_uint32* pProtocolType); -extern ret_t rtl8367c_setAsicSvlanUplinkPortMask(rtk_uint32 portMask); -extern ret_t rtl8367c_getAsicSvlanUplinkPortMask(rtk_uint32* pPortmask); -extern ret_t rtl8367c_setAsicSvlanEgressUnassign(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicSvlanEgressUnassign(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicSvlanC2SConf(rtk_uint32 index, rtk_uint32 evid, rtk_uint32 portmask, rtk_uint32 svidx); -extern ret_t rtl8367c_getAsicSvlanC2SConf(rtk_uint32 index, rtk_uint32* pEvid, rtk_uint32* pPortmask, rtk_uint32* pSvidx); -extern ret_t rtl8367c_setAsicSvlanMC2SConf(rtk_uint32 index,rtl8367c_svlan_mc2s_t* pSvlanMc2sCfg); -extern ret_t rtl8367c_getAsicSvlanMC2SConf(rtk_uint32 index,rtl8367c_svlan_mc2s_t* pSvlanMc2sCfg); -extern ret_t rtl8367c_setAsicSvlanSP2CConf(rtk_uint32 index,rtl8367c_svlan_s2c_t* pSvlanSp2cCfg); -extern ret_t rtl8367c_getAsicSvlanSP2CConf(rtk_uint32 index,rtl8367c_svlan_s2c_t* pSvlanSp2cCfg); -extern ret_t rtl8367c_setAsicSvlanDmacCvidSel(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicSvlanDmacCvidSel(rtk_uint32 port, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicSvlanUntagVlan(rtk_uint32 index); -extern ret_t rtl8367c_getAsicSvlanUntagVlan(rtk_uint32* pIndex); -extern ret_t rtl8367c_setAsicSvlanUnmatchVlan(rtk_uint32 index); -extern ret_t rtl8367c_getAsicSvlanUnmatchVlan(rtk_uint32* pIndex); -extern ret_t rtl8367c_setAsicSvlanLookupType(rtk_uint32 type); -extern ret_t rtl8367c_getAsicSvlanLookupType(rtk_uint32* pType); - - -#endif /*#ifndef _RTL8367C_ASICDRV_SVLAN_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_trunking.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_trunking.h deleted file mode 100644 index 2e3a682819..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_trunking.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port trunking related functions - * - */ - - -#ifndef _RTL8367C_ASICDRV_TRUNKING_H_ -#define _RTL8367C_ASICDRV_TRUNKING_H_ - -#include - -#define RTL8367C_MAX_TRUNK_GID (2) -#define RTL8367C_TRUNKING_PORTNO (4) -#define RTL8367C_TRUNKING1_PORTN0 (2) -#define RTL8367C_TRUNKING_HASHVALUE_MAX (15) - -extern ret_t rtl8367c_setAsicTrunkingGroup(rtk_uint32 group, rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicTrunkingGroup(rtk_uint32 group, rtk_uint32* pPortmask); -extern ret_t rtl8367c_setAsicTrunkingFlood(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicTrunkingFlood(rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicTrunkingHashSelect(rtk_uint32 hashsel); -extern ret_t rtl8367c_getAsicTrunkingHashSelect(rtk_uint32* pHashsel); - -extern ret_t rtl8367c_getAsicQeueuEmptyStatus(rtk_uint32* pPortmask); - -extern ret_t rtl8367c_setAsicTrunkingMode(rtk_uint32 mode); -extern ret_t rtl8367c_getAsicTrunkingMode(rtk_uint32* pMode); -extern ret_t rtl8367c_setAsicTrunkingFc(rtk_uint32 group, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicTrunkingFc(rtk_uint32 group, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicTrunkingHashTable(rtk_uint32 hashval, rtk_uint32 portId); -extern ret_t rtl8367c_getAsicTrunkingHashTable(rtk_uint32 hashval, rtk_uint32* pPortId); -extern ret_t rtl8367c_setAsicTrunkingHashTable1(rtk_uint32 hashval, rtk_uint32 portId); -extern ret_t rtl8367c_getAsicTrunkingHashTable1(rtk_uint32 hashval, rtk_uint32* pPortId); - -#endif /*_RTL8367C_ASICDRV_TRUNKING_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_unknownMulticast.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_unknownMulticast.h deleted file mode 100644 index d142d25cff..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_unknownMulticast.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Unkown multicast related functions - * - */ - -#ifndef _RTL8367C_ASICDRV_UNKNOWNMULTICAST_H_ -#define _RTL8367C_ASICDRV_UNKNOWNMULTICAST_H_ - -#include - -enum L2_UNKOWN_MULTICAST_BEHAVE -{ - L2_UNKOWN_MULTICAST_FLOODING = 0, - L2_UNKOWN_MULTICAST_DROP, - L2_UNKOWN_MULTICAST_TRAP, - L2_UNKOWN_MULTICAST_DROP_EXCLUDE_RMA, - L2_UNKOWN_MULTICAST_END -}; - -enum L3_UNKOWN_MULTICAST_BEHAVE -{ - L3_UNKOWN_MULTICAST_FLOODING = 0, - L3_UNKOWN_MULTICAST_DROP, - L3_UNKOWN_MULTICAST_TRAP, - L3_UNKOWN_MULTICAST_ROUTER, - L3_UNKOWN_MULTICAST_END -}; - -enum MULTICASTTYPE{ - MULTICAST_TYPE_IPV4 = 0, - MULTICAST_TYPE_IPV6, - MULTICAST_TYPE_L2, - MULTICAST_TYPE_END -}; - -extern ret_t rtl8367c_setAsicUnknownL2MulticastBehavior(rtk_uint32 port, rtk_uint32 behave); -extern ret_t rtl8367c_getAsicUnknownL2MulticastBehavior(rtk_uint32 port, rtk_uint32 *pBehave); -extern ret_t rtl8367c_setAsicUnknownIPv4MulticastBehavior(rtk_uint32 port, rtk_uint32 behave); -extern ret_t rtl8367c_getAsicUnknownIPv4MulticastBehavior(rtk_uint32 port, rtk_uint32 *pBehave); -extern ret_t rtl8367c_setAsicUnknownIPv6MulticastBehavior(rtk_uint32 port, rtk_uint32 behave); -extern ret_t rtl8367c_getAsicUnknownIPv6MulticastBehavior(rtk_uint32 port, rtk_uint32 *pBehave); -extern ret_t rtl8367c_setAsicUnknownMulticastTrapPriority(rtk_uint32 priority); -extern ret_t rtl8367c_getAsicUnknownMulticastTrapPriority(rtk_uint32 *pPriority); - -#endif /*_RTL8367C_ASICDRV_UNKNOWNMULTICAST_H_*/ - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_vlan.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_vlan.h deleted file mode 100644 index 61848650b5..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_asicdrv_vlan.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : VLAN related functions - * - */ - - -#ifndef _RTL8367C_ASICDRV_VLAN_H_ -#define _RTL8367C_ASICDRV_VLAN_H_ - -/****************************************************************/ -/* Header File inclusion */ -/****************************************************************/ -#include - -/****************************************************************/ -/* Constant Definition */ -/****************************************************************/ -#define RTL8367C_PROTOVLAN_GIDX_MAX 3 -#define RTL8367C_PROTOVLAN_GROUPNO 4 - -#define RTL8367C_VLAN_BUSY_CHECK_NO (10) - -#define RTL8367C_VLAN_MBRCFG_LEN (4) -#define RTL8367C_VLAN_4KTABLE_LEN (3) - -/****************************************************************/ -/* Type Definition */ -/****************************************************************/ -typedef struct VLANCONFIGUSER -{ - rtk_uint16 evid; - rtk_uint16 mbr; - rtk_uint16 fid_msti; - rtk_uint16 envlanpol; - rtk_uint16 meteridx; - rtk_uint16 vbpen; - rtk_uint16 vbpri; -}rtl8367c_vlanconfiguser; - -typedef struct USER_VLANTABLE{ - - rtk_uint16 vid; - rtk_uint16 mbr; - rtk_uint16 untag; - rtk_uint16 fid_msti; - rtk_uint16 envlanpol; - rtk_uint16 meteridx; - rtk_uint16 vbpen; - rtk_uint16 vbpri; - rtk_uint16 ivl_svl; - -}rtl8367c_user_vlan4kentry; - -typedef enum -{ - FRAME_TYPE_BOTH = 0, - FRAME_TYPE_TAGGED_ONLY, - FRAME_TYPE_UNTAGGED_ONLY, - FRAME_TYPE_MAX_BOUND -} rtl8367c_accframetype; - -typedef enum -{ - EG_TAG_MODE_ORI = 0, - EG_TAG_MODE_KEEP, - EG_TAG_MODE_PRI_TAG, - EG_TAG_MODE_REAL_KEEP, - EG_TAG_MODE_END -} rtl8367c_egtagmode; - -typedef enum -{ - PPVLAN_FRAME_TYPE_ETHERNET = 0, - PPVLAN_FRAME_TYPE_LLC, - PPVLAN_FRAME_TYPE_RFC1042, - PPVLAN_FRAME_TYPE_END -} rtl8367c_provlan_frametype; - -enum RTL8367C_STPST -{ - STPST_DISABLED = 0, - STPST_BLOCKING, - STPST_LEARNING, - STPST_FORWARDING -}; - -enum RTL8367C_RESVIDACT -{ - RES_VID_ACT_UNTAG = 0, - RES_VID_ACT_TAG, - RES_VID_ACT_END -}; - -typedef struct -{ - rtl8367c_provlan_frametype frameType; - rtk_uint32 etherType; -} rtl8367c_protocolgdatacfg; - -typedef struct -{ - rtk_uint32 valid; - rtk_uint32 vlan_idx; - rtk_uint32 priority; -} rtl8367c_protocolvlancfg; - -extern ret_t rtl8367c_setAsicVlanMemberConfig(rtk_uint32 index, rtl8367c_vlanconfiguser *pVlanCg); -extern ret_t rtl8367c_getAsicVlanMemberConfig(rtk_uint32 index, rtl8367c_vlanconfiguser *pVlanCg); -extern ret_t rtl8367c_setAsicVlan4kEntry(rtl8367c_user_vlan4kentry *pVlan4kEntry ); -extern ret_t rtl8367c_getAsicVlan4kEntry(rtl8367c_user_vlan4kentry *pVlan4kEntry ); -extern ret_t rtl8367c_setAsicVlanAccpetFrameType(rtk_uint32 port, rtl8367c_accframetype frameType); -extern ret_t rtl8367c_getAsicVlanAccpetFrameType(rtk_uint32 port, rtl8367c_accframetype *pFrameType); -extern ret_t rtl8367c_setAsicVlanIngressFilter(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicVlanIngressFilter(rtk_uint32 port, rtk_uint32 *pEnable); -extern ret_t rtl8367c_setAsicVlanEgressTagMode(rtk_uint32 port, rtl8367c_egtagmode tagMode); -extern ret_t rtl8367c_getAsicVlanEgressTagMode(rtk_uint32 port, rtl8367c_egtagmode *pTagMode); -extern ret_t rtl8367c_setAsicVlanPortBasedVID(rtk_uint32 port, rtk_uint32 index, rtk_uint32 pri); -extern ret_t rtl8367c_getAsicVlanPortBasedVID(rtk_uint32 port, rtk_uint32 *pIndex, rtk_uint32 *pPri); -extern ret_t rtl8367c_setAsicVlanProtocolBasedGroupData(rtk_uint32 index, rtl8367c_protocolgdatacfg *pPbCfg); -extern ret_t rtl8367c_getAsicVlanProtocolBasedGroupData(rtk_uint32 index, rtl8367c_protocolgdatacfg *pPbCfg); -extern ret_t rtl8367c_setAsicVlanPortAndProtocolBased(rtk_uint32 port, rtk_uint32 index, rtl8367c_protocolvlancfg *pPpbCfg); -extern ret_t rtl8367c_getAsicVlanPortAndProtocolBased(rtk_uint32 port, rtk_uint32 index, rtl8367c_protocolvlancfg *pPpbCfg); -extern ret_t rtl8367c_setAsicVlanFilter(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicVlanFilter(rtk_uint32* pEnabled); - -extern ret_t rtl8367c_setAsicPortBasedFid(rtk_uint32 port, rtk_uint32 fid); -extern ret_t rtl8367c_getAsicPortBasedFid(rtk_uint32 port, rtk_uint32* pFid); -extern ret_t rtl8367c_setAsicPortBasedFidEn(rtk_uint32 port, rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicPortBasedFidEn(rtk_uint32 port, rtk_uint32* pEnabled); -extern ret_t rtl8367c_setAsicSpanningTreeStatus(rtk_uint32 port, rtk_uint32 msti, rtk_uint32 state); -extern ret_t rtl8367c_getAsicSpanningTreeStatus(rtk_uint32 port, rtk_uint32 msti, rtk_uint32* pState); -extern ret_t rtl8367c_setAsicVlanUntagDscpPriorityEn(rtk_uint32 enabled); -extern ret_t rtl8367c_getAsicVlanUntagDscpPriorityEn(rtk_uint32* enabled); -extern ret_t rtl8367c_setAsicVlanTransparent(rtk_uint32 port, rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicVlanTransparent(rtk_uint32 port, rtk_uint32 *pPortmask); -extern ret_t rtl8367c_setAsicVlanEgressKeep(rtk_uint32 port, rtk_uint32 portmask); -extern ret_t rtl8367c_getAsicVlanEgressKeep(rtk_uint32 port, rtk_uint32* pPortmask); -extern ret_t rtl8367c_setReservedVidAction(rtk_uint32 vid0Action, rtk_uint32 vid4095Action); -extern ret_t rtl8367c_getReservedVidAction(rtk_uint32 *pVid0Action, rtk_uint32 *pVid4095Action); -extern ret_t rtl8367c_setRealKeepRemarkEn(rtk_uint32 enabled); -extern ret_t rtl8367c_getRealKeepRemarkEn(rtk_uint32 *pEnabled); -extern ret_t rtl8367c_resetVlan(void); - -#endif /*#ifndef _RTL8367C_ASICDRV_VLAN_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_base.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_base.h deleted file mode 100644 index 676ca8ed74..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_base.h +++ /dev/null @@ -1,596 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Regsiter MACRO related definition - * - */ - -#ifndef _RTL8367C_BASE_H_ -#define _RTL8367C_BASE_H_ - -#include - -/* (16'h0000) port_reg */ - -#define RTL8367C_PORT_SPECIAL_CONGEST_MODE_TIMER_BASE RTL8367C_REG_PKTGEN_PORT0_TIMER -#define RTL8367C_PORT_SPECIAL_CONGEST_MODE_TIMER_REG(port) (RTL8367C_PORT_SPECIAL_CONGEST_MODE_TIMER_BASE + (port << 5)) - -#define RTL8367C_PORT_MISC_CFG_BASE RTL8367C_REG_PORT0_MISC_CFG -#define RTL8367C_PORT_MISC_CFG_REG(port) (RTL8367C_PORT_MISC_CFG_BASE + (port << 5)) -#define RTL8367C_1QREMARK_ENABLE_OFFSET RTL8367C_PORT0_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET -#define RTL8367C_1QREMARK_ENABLE_MASK RTL8367C_PORT0_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK - -#define RTL8367C_INGRESSBW_PORT_IFG_MASK RTL8367C_PORT0_MISC_CFG_INGRESSBW_IFG_MASK -#define RTL8367C_VLAN_EGRESS_MDOE_MASK RTL8367C_PORT0_MISC_CFG_VLAN_EGRESS_MODE_MASK -#define RTL8367C_SPECIALCONGEST_SUSTAIN_TIMER_MASK RTL8367C_PORT0_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK - -#define RTL8367C_INGRESSBW_PORT_RATE_LSB_BASE RTL8367C_REG_INGRESSBW_PORT0_RATE_CTRL0 -#define RTL8367C_INGRESSBW_PORT_RATE_LSB_REG(port) (RTL8367C_INGRESSBW_PORT_RATE_LSB_BASE + (port << 5)) - -#define RTL8367C_PORT_SMALL_IPG_REG(port) (RTL8367C_REG_PORT0_MISC_CFG + (port*0x20)) - -#define RTL8367C_PORT_EEE_CFG_BASE RTL8367C_REG_PORT0_EEECFG -#define RTL8367C_PORT_EEE_CFG_REG(port) (RTL8367C_REG_PORT0_EEECFG + (port << 5)) -#define RTL8367C_PORT_EEE_100M_OFFSET RTL8367C_PORT0_EEECFG_EEE_100M_OFFSET -#define RTL8367C_PORT_EEE_100M_MASK RTL8367C_PORT0_EEECFG_EEE_100M_MASK -#define RTL8367C_PORT_EEE_GIGA_OFFSET RTL8367C_PORT0_EEECFG_EEE_GIGA_500M_OFFSET -#define RTL8367C_PORT_EEE_GIGA_MASK RTL8367C_PORT0_EEECFG_EEE_GIGA_500M_MASK - - -/* (16'h0200) outq_reg */ - -#define RTL8367C_FLOWCTRL_QUEUE_DROP_ON_BASE RTL8367C_REG_FLOWCTRL_QUEUE0_DROP_ON -#define RTL8367C_FLOWCTRL_QUEUE_DROP_ON_REG(queue) (RTL8367C_FLOWCTRL_QUEUE_DROP_ON_BASE + queue) -#define RTL8367C_FLOWCTRL_QUEUE_DROP_ON_MASK RTL8367C_FLOWCTRL_QUEUE0_DROP_ON_MASK - -#define RTL8367C_FLOWCTRL_PORT_DROP_ON_BASE RTL8367C_REG_FLOWCTRL_PORT0_DROP_ON -#define RTL8367C_FLOWCTRL_PORT_DROP_ON_REG(PORT) (RTL8367C_FLOWCTRL_PORT_DROP_ON_BASE + PORT) -#define RTL8367C_FLOWCTRL_PORT_DROP_ON_MASK RTL8367C_FLOWCTRL_PORT0_DROP_ON_MASK - -#define RTL8367C_FLOWCTRL_PORT_GAP_REG RTL8367C_REG_FLOWCTRL_PORT_GAP -#define RTL8367C_FLOWCTRL_QUEUE_GAP_REG RTL8367C_REG_FLOWCTRL_QUEUE_GAP -#define RTL8367C_FLOWCTRL_PORT_QEMPTY_REG RTL8367C_REG_PORT_QEMPTY - -/* (16'h0300) sch_reg */ - -#define RTL8367C_SCHEDULE_WFQ_BURST_SIZE_REG RTL8367C_REG_SCHEDULE_WFQ_BURST_SIZE - -#define RTL8367C_SCHEDULE_QUEUE_TYPE_BASE RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL0 -#define RTL8367C_SCHEDULE_QUEUE_TYPE_REG(port) (RTL8367C_SCHEDULE_QUEUE_TYPE_BASE + (port >> 1)) -#define RTL8367C_SCHEDULE_QUEUE_TYPE_OFFSET(port, queue) (((port & 0x1) << 3) + queue) -#define RTL8367C_SCHEDULE_QUEUE_TYPE_MASK(port, queue) RTL8367C_SCHEDULE_QUEUE_TYPE_OFFSET(port, queue) - -#define RTL8367C_SCHEDULE_PORT_QUEUE_WFQ_WEIGHT_BASE RTL8367C_REG_SCHEDULE_PORT0_QUEUE0_WFQ_WEIGHT -#define RTL8367C_SCHEDULE_PORT_QUEUE_WFQ_WEIGHT_REG(port, queue) (RTL8367C_SCHEDULE_PORT_QUEUE_WFQ_WEIGHT_BASE + (port << 3) + queue) - -#define RTL8367C_SCHEDULE_APR_CTRL_REG RTL8367C_REG_SCHEDULE_APR_CTRL0 -#define RTL8367C_SCHEDULE_APR_CTRL_OFFSET(port) (port) -#define RTL8367C_SCHEDULE_APR_CTRL_MASK(port) (1 << RTL8367C_SCHEDULE_APR_CTRL_OFFSET(port)) - -#define RTL8367C_SCHEDULE_PORT_APR_METER_BASE RTL8367C_REG_SCHEDULE_PORT0_APR_METER_CTRL0 -#define RTL8367C_SCHEDULE_PORT_APR_METER_REG(port, queue) (RTL8367C_SCHEDULE_PORT_APR_METER_BASE + (port << 2) + (queue / 5)) -#define RTL8367C_SCHEDULE_PORT_APR_METER_OFFSET(queue) (3 * (queue % 5)) -#define RTL8367C_SCHEDULE_PORT_APR_METER_MASK(queue) (RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE0_APR_METER_MASK << RTL8367C_SCHEDULE_PORT_APR_METER_OFFSET(queue)) - -#define RTL8367C_PORT_EGRESSBW_LSB_BASE RTL8367C_REG_PORT0_EGRESSBW_CTRL0 -#define RTL8367C_PORT_EGRESSBW_LSB_REG(port) (RTL8367C_PORT_EGRESSBW_LSB_BASE + (port << 1)) - -#define RTL8367C_PORT_EGRESSBW_MSB_BASE RTL8367C_REG_PORT0_EGRESSBW_CTRL1 -#define RTL8367C_PORT_EGRESSBW_MSB_REG(port) (RTL8367C_PORT_EGRESSBW_MSB_BASE + (port << 1)) - -/* (16'h0500) table_reg */ - -#define RTL8367C_TABLE_ACCESS_CTRL_REG RTL8367C_REG_TABLE_ACCESS_CTRL - -#define RTL8367C_TABLE_ACCESS_ADDR_REG RTL8367C_REG_TABLE_ACCESS_ADDR - -#define RTL8367C_TABLE_ACCESS_STATUS_REG RTL8367C_REG_TABLE_LUT_ADDR - -#define RTL8367C_TABLE_ACCESS_WRDATA_BASE RTL8367C_REG_TABLE_WRITE_DATA0 -#define RTL8367C_TABLE_ACCESS_WRDATA_REG(index) (RTL8367C_TABLE_ACCESS_WRDATA_BASE + index) - -#define RTL8367C_TABLE_ACCESS_RDDATA_BASE RTL8367C_REG_TABLE_READ_DATA0 -#define RTL8367C_TABLE_ACCESS_RDDATA_REG(index) (RTL8367C_TABLE_ACCESS_RDDATA_BASE + index) - - - -/* (16'h0600) acl_reg */ - -#define RTL8367C_ACL_RULE_TEMPLATE_CTRL_BASE RTL8367C_REG_ACL_RULE_TEMPLATE0_CTRL0 -#define RTL8367C_ACL_RULE_TEMPLATE_CTRL_REG(template) (RTL8367C_ACL_RULE_TEMPLATE_CTRL_BASE + template * 0x4) -#define RTL8367C_ACL_TEMPLATE_FIELD_OFFSET(field) ((field & 0x01) <<3) -#define RTL8367C_ACL_TEMPLATE_FIELD_MASK(field) (0x3F << RTL8367C_ACL_TEMPLATE_FIELD_OFFSET(field)) - -#define RTL8367C_ACL_ACTION_CTRL_BASE RTL8367C_REG_ACL_ACTION_CTRL0 -#define RTL8367C_ACL_ACTION_CTRL_REG(rule) (RTL8367C_ACL_ACTION_CTRL_BASE + (rule >> 1)) -#define RTL8367C_ACL_ACTION_CTRL2_BASE RTL8367C_REG_ACL_ACTION_CTRL32 -#define RTL8367C_ACL_ACTION_CTRL2_REG(rule) (RTL8367C_ACL_ACTION_CTRL2_BASE + ((rule-64) >> 1)) - -#define RTL8367C_ACL_OP_NOT_OFFSET(rule) (6 + ((rule & 0x1) << 3)) -#define RTL8367C_ACL_OP_NOT_MASK(rule) (1 << RTL8367C_ACL_OP_NOT_OFFSET(rule)) -#define RTL8367C_ACL_OP_ACTION_OFFSET(rule) ((rule & 0x1) << 3) -#define RTL8367C_ACL_OP_ACTION_MASK(rule) (0x3F << RTL8367C_ACL_OP_ACTION_OFFSET(rule)) - -#define RTL8367C_ACL_ENABLE_REG RTL8367C_REG_ACL_ENABLE -#define RTL8367C_ACL_UNMATCH_PERMIT_REG RTL8367C_REG_ACL_UNMATCH_PERMIT - -/* (16'h0700) cvlan_reg */ - -#define RTL8367C_VLAN_PVID_CTRL_BASE RTL8367C_REG_VLAN_PVID_CTRL0 -#define RTL8367C_VLAN_PVID_CTRL_REG(port) (RTL8367C_VLAN_PVID_CTRL_BASE + (port >> 1)) -#define RTL8367C_PORT_VIDX_OFFSET(port) ((port &1)<<3) -#define RTL8367C_PORT_VIDX_MASK(port) (RTL8367C_PORT0_VIDX_MASK << RTL8367C_PORT_VIDX_OFFSET(port)) - -#define RTL8367C_VLAN_PPB_VALID_BASE RTL8367C_REG_VLAN_PPB0_VALID -#define RTL8367C_VLAN_PPB_VALID_REG(item) (RTL8367C_VLAN_PPB_VALID_BASE + (item << 3)) - -#define RTL8367C_VLAN_PPB_CTRL_BASE RTL8367C_REG_VLAN_PPB0_CTRL0 -#define RTL8367C_VLAN_PPB_CTRL_REG(item, port) (RTL8367C_VLAN_PPB_CTRL_BASE + (item << 3) + (port / 3) ) -#define RTL8367C_VLAN_PPB_CTRL_OFFSET(port) ((port % 3) * 5) -#define RTL8367C_VLAN_PPB_CTRL_MASK(port) (RTL8367C_VLAN_PPB0_CTRL0_PORT0_INDEX_MASK << RTL8367C_VLAN_PPB_CTRL_OFFSET(port)) - -#define RTL8367C_VLAN_PPB_FRAMETYPE_BASE RTL8367C_REG_VLAN_PPB0_CTRL2 -#define RTL8367C_VLAN_PPB_FRAMETYPE_REG(item) (RTL8367C_VLAN_PPB_FRAMETYPE_BASE + (item << 3)) -#define RTL8367C_VLAN_PPB_FRAMETYPE_MASK RTL8367C_VLAN_PPB0_CTRL2_FRAME_TYPE_MASK - -#define RTL8367C_VLAN_PPB_ETHERTYPR_BASE RTL8367C_REG_VLAN_PPB0_CTRL3 -#define RTL8367C_VLAN_PPB_ETHERTYPR_REG(item) (RTL8367C_VLAN_PPB_ETHERTYPR_BASE + (item << 3)) - -#define RTL8367C_VLAN_MEMBER_CONFIGURATION_BASE RTL8367C_REG_VLAN_MEMBER_CONFIGURATION0_CTRL0 - - -#define RTL8367C_VLAN_CTRL_REG RTL8367C_REG_VLAN_CTRL - -#define RTL8367C_VLAN_INGRESS_REG RTL8367C_REG_VLAN_INGRESS - -#define RTL8367C_VLAN_ACCEPT_FRAME_TYPE_BASE RTL8367C_REG_VLAN_ACCEPT_FRAME_TYPE_CTRL0 -#define RTL8367C_VLAN_ACCEPT_FRAME_TYPE_REG(port) (RTL8367C_VLAN_ACCEPT_FRAME_TYPE_BASE + (port >> 3)) -#define RTL8367C_VLAN_ACCEPT_FRAME_TYPE_MASK(port) (RTL8367C_PORT0_FRAME_TYPE_MASK << ((port & 0x7) << 1)) - -#define RTL8367C_PORT_EFID_BASE RTL8367C_REG_PORT_EFID_CTRL0 -#define RTL8367C_PORT_EFID_REG(port) (RTL8367C_PORT_EFID_BASE + (port >> 2)) -#define RTL8367C_PORT_EFID_OFFSET(port) ((port & 0x3) << 2) -#define RTL8367C_PORT_EFID_MASK(port) (RTL8367C_PORT0_EFID_MASK << RTL8367C_PORT_EFID_OFFSET(port)) - -#define RTL8367C_PORT_PBFIDEN_REG RTL8367C_REG_PORT_PBFIDEN - -#define RTL8367C_PORT_PBFID_BASE RTL8367C_REG_PORT0_PBFID -#define RTL8367C_PORT_PBFID_REG(port) (RTL8367C_PORT_PBFID_BASE + port) - -/* (16'h0800) dpm_reg */ - -#define RTL8367C_RMA_CTRL_BASE RTL8367C_REG_RMA_CTRL00 - - -#define RTL8367C_VLAN_PORTBASED_PRIORITY_BASE RTL8367C_REG_VLAN_PORTBASED_PRIORITY_CTRL0 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_REG(port) (RTL8367C_VLAN_PORTBASED_PRIORITY_BASE + (port >> 2)) -#define RTL8367C_VLAN_PORTBASED_PRIORITY_OFFSET(port) ((port & 0x3) << 2) -#define RTL8367C_VLAN_PORTBASED_PRIORITY_MASK(port) (0x7 << RTL8367C_VLAN_PORTBASED_PRIORITY_OFFSET(port)) - -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM_BASE RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM0_CTRL0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM_REG(port, item) (RTL8367C_VLAN_PPB_PRIORITY_ITEM_BASE + (item << 2)+ (port>>2)) -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM_OFFSET(port) ((port & 0x3) <<2) -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM_MASK(port) (RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT0_PRIORITY_MASK << RTL8367C_VLAN_PPB_PRIORITY_ITEM_OFFSET(port)) - -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_BASE RTL8367C_REG_QOS_1Q_PRIORITY_REMAPPING_CTRL0 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_REG(pri) (RTL8367C_QOS_1Q_PRIORITY_REMAPPING_BASE + (pri >> 2)) -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_OFFSET(pri) ((pri & 0x3) << 2) -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_MASK(pri) (0x7 << RTL8367C_QOS_1Q_PRIORITY_REMAPPING_OFFSET(pri)) - -#define RTL8367C_QOS_DSCP_TO_PRIORITY_BASE RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL0 -#define RTL8367C_QOS_DSCP_TO_PRIORITY_REG(dscp) (RTL8367C_QOS_DSCP_TO_PRIORITY_BASE + (dscp >> 2)) -#define RTL8367C_QOS_DSCP_TO_PRIORITY_OFFSET(dscp) ((dscp & 0x3) << 2) -#define RTL8367C_QOS_DSCP_TO_PRIORITY_MASK(dscp) (0x7 << RTL8367C_QOS_DSCP_TO_PRIORITY_OFFSET(dscp)) - -#define RTL8367C_QOS_PORTBASED_PRIORITY_BASE RTL8367C_REG_QOS_PORTBASED_PRIORITY_CTRL0 -#define RTL8367C_QOS_PORTBASED_PRIORITY_REG(port) (RTL8367C_QOS_PORTBASED_PRIORITY_BASE + (port >> 2)) -#define RTL8367C_QOS_PORTBASED_PRIORITY_OFFSET(port) ((port & 0x3) << 2) -#define RTL8367C_QOS_PORTBASED_PRIORITY_MASK(port) (0x7 << RTL8367C_QOS_PORTBASED_PRIORITY_OFFSET(port)) - -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_BASE RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_CTRL0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_REG(src) (RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_BASE + (src >> 1)) -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_OFFSET(src) ((src & 1) << 3) -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_MASK(src) (RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL0_QOS_PORT_WEIGHT_MASK << RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_OFFSET(src)) - -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_BASE RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_REG(src) (RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_BASE + (src >> 1)) -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_OFFSET(src) ((src & 1) << 3) -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_MASK(src) (RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0_QOS_PORT_WEIGHT_MASK << RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_OFFSET(src)) - -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_IDX_CTRL RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_IDX -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_IDX(port) (1 << port) - -#define RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_BASE RTL8367C_REG_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0 -#define RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_REG(pri) (RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_BASE + (pri >> 2)) -#define RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_OFFSET(pri) ((pri & 0x3) << 2) -#define RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_MASK(pri) (RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY0_MASK << RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_OFFSET(pri)) - -#define RTL8367C_QOS_TRAP_PRIORITY_CTRL0_REG RTL8367C_REG_QOS_TRAP_PRIORITY0 - -#define RTL8367C_QOS_TRAP_PRIORITY_CTRL1_REG RTL8367C_REG_QOS_TRAP_PRIORITY1 - -#define RTL8367C_QOS_DSCP_TO_DSCP_BASE RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL0 -#define RTL8367C_QOS_DSCP_TO_DSCP_REG(dscp) (RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL0 + (dscp >> 1)) -#define RTL8367C_QOS_DSCP_TO_DSCP_OFFSET(dscp) ((dscp & 0x1) << 8) -#define RTL8367C_QOS_DSCP_TO_DSCP_MASK(dscp) (0x3F << RTL8367C_QOS_DSCP_TO_DSCP_OFFSET(dscp)) - -#define RTL8367C_UNUCAST_FLOADING_PMSK_REG RTL8367C_REG_UNDA_FLOODING_PMSK - -#define RTL8367C_UNMCAST_FLOADING_PMSK_REG RTL8367C_REG_UNMCAST_FLOADING_PMSK - -#define RTL8367C_BCAST_FLOADING_PMSK_REG RTL8367C_REG_BCAST_FLOADING_PMSK - -#define RTL8367C_PORT_ISOLATION_PORT_MASK_BASE RTL8367C_REG_PORT_ISOLATION_PORT0_MASK -#define RTL8367C_PORT_ISOLATION_PORT_MASK_REG(port) (RTL8367C_PORT_ISOLATION_PORT_MASK_BASE + port) - -#define RTL8367C_FORCE_CTRL_REG RTL8367C_REG_FORCE_CTRL - -#define RTL8367C_SOURCE_PORT_BLOCK_REG RTL8367C_REG_SOURCE_PORT_PERMIT - -#define RTL8367C_IPMCAST_VLAN_LEAKY_REG RTL8367C_REG_IPMCAST_VLAN_LEAKY - -#define RTL8367C_IPMCAST_PORTISO_LEAKY_REG RTL8367C_REG_IPMCAST_PORTISO_LEAKY - -#define RTL8367C_PORT_SECURIT_CTRL_REG RTL8367C_REG_PORT_SECURITY_CTRL - -#define RTL8367C_UNKNOWN_IPV4_MULTICAST_BASE RTL8367C_REG_UNKNOWN_IPV4_MULTICAST_CTRL0 -#define RTL8367C_UNKNOWN_IPV4_MULTICAST_REG(port) (RTL8367C_UNKNOWN_IPV4_MULTICAST_BASE + (port >> 3)) -#define RTL8367C_UNKNOWN_IPV4_MULTICAST_OFFSET(port) ((port & 0x7) << 1) -#define RTL8367C_UNKNOWN_IPV4_MULTICAST_MASK(port) (RTL8367C_PORT0_UNKNOWN_IP4_MCAST_MASK << RTL8367C_UNKNOWN_IPV4_MULTICAST_OFFSET(port)) - -#define RTL8367C_UNKNOWN_IPV6_MULTICAST_BASE RTL8367C_REG_UNKNOWN_IPV6_MULTICAST_CTRL0 -#define RTL8367C_UNKNOWN_IPV6_MULTICAST_REG(port) (RTL8367C_UNKNOWN_IPV6_MULTICAST_BASE + (port >> 3)) -#define RTL8367C_UNKNOWN_IPV6_MULTICAST_OFFSET(port) ((port & 0x7) << 1) -#define RTL8367C_UNKNOWN_IPV6_MULTICAST_MASK(port) (RTL8367C_PORT0_UNKNOWN_IP4_MCAST_MASK << RTL8367C_UNKNOWN_IPV6_MULTICAST_OFFSET(port)) - -#define RTL8367C_UNKNOWN_L2_MULTICAST_BASE RTL8367C_REG_UNKNOWN_L2_MULTICAST_CTRL0 -#define RTL8367C_UNKNOWN_L2_MULTICAST_REG(port) (RTL8367C_UNKNOWN_L2_MULTICAST_BASE + (port >> 3)) -#define RTL8367C_UNKNOWN_L2_MULTICAST_OFFSET(port) ((port & 0x7) << 1) -#define RTL8367C_UNKNOWN_L2_MULTICAST_MASK(port) (RTL8367C_PORT0_UNKNOWN_L2_MCAST_MASK << RTL8367C_UNKNOWN_L2_MULTICAST_OFFSET(port)) - -#define RTL8367C_PORT_TRUNK_CTRL_REG RTL8367C_REG_PORT_TRUNK_CTRL -#define RTL8367C_PORT_TRUNK_HASH_MASK 0x007F - -#define RTL8367C_PORT_TRUNK_GROUP_MASK_REG RTL8367C_REG_PORT_TRUNK_GROUP_MASK -#define RTL8367C_PORT_TRUNK_GROUP_MASK_OFFSET(group) (group << 2) -#define RTL8367C_PORT_TRUNK_GROUP_MASK_MASK(group) (RTL8367C_PORT_TRUNK_GROUP0_MASK_MASK << RTL8367C_PORT_TRUNK_GROUP_MASK_OFFSET(group)) - -#define RTL8367C_PORT_TRUNK_FLOWCTRL_REG RTL8367C_REG_PORT_TRUNK_FLOWCTRL - -#define RTL8367C_QOS_PORT_QUEUE_NUMBER_BASE RTL8367C_REG_QOS_PORT_QUEUE_NUMBER_CTRL0 -#define RTL8367C_QOS_PORT_QUEUE_NUMBER_REG(port) (RTL8367C_QOS_PORT_QUEUE_NUMBER_BASE + (port >> 2)) -#define RTL8367C_QOS_PORT_QUEUE_NUMBER_OFFSET(port) ((port & 0x3) << 2) -#define RTL8367C_QOS_PORT_QUEUE_NUMBER_MASK(port) (0x7 << RTL8367C_QOS_PORT_QUEUE_NUMBER_OFFSET(port)) - -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_BASE RTL8367C_REG_QOS_1Q_PRIORITY_TO_QID_CTRL0 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_REG(index, pri) (RTL8367C_QOS_1Q_PRIORITY_TO_QID_BASE + (index << 1) + (pri >> 2)) -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_OFFSET(pri) ((pri & 0x3) << 2) -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_MASK(pri) (RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK << RTL8367C_QOS_1Q_PRIORITY_TO_QID_OFFSET(pri)) - -#define RTL8367C_DEBUG_INFO_BASE RTL8367C_REG_PORT_DEBUG_INFO_CTRL0 -#define RTL8367C_DEBUG_INFO_REG(port) (RTL8367C_DEBUG_INFO_BASE + (port >>1)) -#define RTL8367C_DEBUG_INFO_OFFSET(port) ((port&1)<<3) -#define RTL8367C_DEBUG_INFO_MASK(port) (RTL8367C_PORT0_DEBUG_INFO_MASK << RTL8367C_DEBUG_INFO_OFFSET(port)) - -/* (16'h0a00) l2_reg */ - -#define RTL8367C_VLAN_MSTI_BASE RTL8367C_REG_VLAN_MSTI0_CTRL0 -#define RTL8367C_VLAN_MSTI_REG(tree, port) (RTL8367C_VLAN_MSTI_BASE + (tree << 1) + (port >> 3)) -#define RTL8367C_VLAN_MSTI_OFFSET(port) ((port & 0x7) << 1) -#define RTL8367C_VLAN_MSTI_MASK(port) (RTL8367C_VLAN_MSTI0_CTRL0_PORT0_STATE_MASK << RTL8367C_VLAN_MSTI_OFFSET(port)) - -#define RTL8367C_LUT_PORT_LEARN_LIMITNO_BASE RTL8367C_REG_LUT_PORT0_LEARN_LIMITNO -#define RTL8367C_LUT_PORT_LEARN_LIMITNO_REG(port) (RTL8367C_LUT_PORT_LEARN_LIMITNO_BASE + port) - -#define RTL8367C_LUT_CFG_REG RTL8367C_REG_LUT_CFG - -#define RTL8367C_LUT_AGEOUT_CTRL_REG RTL8367C_REG_LUT_AGEOUT_CTRL - -#define RTL8367C_FORCE_FLUSH_REG RTL8367C_REG_FORCE_FLUSH - -#define RTL8367C_STORM_BCAST_REG RTL8367C_REG_STORM_BCAST - -#define RTL8367C_STORM_MCAST_REG RTL8367C_REG_STORM_MCAST - -#define RTL8367C_STORM_UNKNOWN_UCAST_REG RTL8367C_REG_STORM_UNKOWN_UCAST - -#define RTL8367C_STORM_UNKNOWN_MCAST_REG RTL8367C_REG_STORM_UNKOWN_MCAST - -#define RTL8367C_STORM_BCAST_METER_CTRL_BASE RTL8367C_REG_STORM_BCAST_METER_CTRL0 -#define RTL8367C_STORM_BCAST_METER_CTRL_REG(port) (RTL8367C_STORM_BCAST_METER_CTRL_BASE + (port >> 1)) -#define RTL8367C_STORM_BCAST_METER_CTRL_OFFSET(port) ((port & 0x1) << 3) -#define RTL8367C_STORM_BCAST_METER_CTRL_MASK(port) (0xFF << RTL8367C_STORM_BCAST_METER_CTRL_OFFSET(port)) - -#define RTL8367C_STORM_MCAST_METER_CTRL_BASE RTL8367C_REG_STORM_MCAST_METER_CTRL0 -#define RTL8367C_STORM_MCAST_METER_CTRL_REG(port) (RTL8367C_STORM_MCAST_METER_CTRL_BASE + (port >> 1)) -#define RTL8367C_STORM_MCAST_METER_CTRL_OFFSET(port) ((port & 0x1) << 3) -#define RTL8367C_STORM_MCAST_METER_CTRL_MASK(port) (0xFF << RTL8367C_STORM_MCAST_METER_CTRL_OFFSET(port)) - -#define RTL8367C_STORM_UNDA_METER_CTRL_BASE RTL8367C_REG_STORM_UNDA_METER_CTRL0 -#define RTL8367C_STORM_UNDA_METER_CTRL_REG(port) (RTL8367C_STORM_UNDA_METER_CTRL_BASE + (port >> 1)) -#define RTL8367C_STORM_UNDA_METER_CTRL_OFFSET(port) ((port & 0x1) << 3) -#define RTL8367C_STORM_UNDA_METER_CTRL_MASK(port) (0xFF << RTL8367C_STORM_UNDA_METER_CTRL_OFFSET(port)) - -#define RTL8367C_STORM_UNMC_METER_CTRL_BASE RTL8367C_REG_STORM_UNMC_METER_CTRL0 -#define RTL8367C_STORM_UNMC_METER_CTRL_REG(port) (RTL8367C_STORM_UNMC_METER_CTRL_BASE + (port >> 1)) -#define RTL8367C_STORM_UNMC_METER_CTRL_OFFSET(port) ((port & 0x1) << 3) -#define RTL8367C_STORM_UNMC_METER_CTRL_MASK(port) (0xFF << RTL8367C_STORM_UNMC_METER_CTRL_OFFSET(port)) - -#define RTL8367C_OAM_PARSER_OFFSET(port) (port*2) -#define RTL8367C_OAM_PARSER_MASK(port) (RTL8367C_PORT0_PARACT_MASK << RTL8367C_OAM_PARSER_OFFSET(port)) - -#define RTL8367C_OAM_MULTIPLEXER_OFFSET(port) (port*2) -#define RTL8367C_OAM_MULTIPLEXER_MASK(port) (RTL8367C_PORT0_PARACT_MASK << RTL8367C_OAM_MULTIPLEXER_OFFSET(port)) - -#define RTL8367C_OAM_CTRL_REG RTL8367C_REG_OAM_CTRL - -#define RTL8367C_DOT1X_PORT_ENABLE_REG RTL8367C_REG_DOT1X_PORT_ENABLE - -#define RTL8367C_DOT1X_MAC_ENABLE_REG RTL8367C_REG_DOT1X_MAC_ENABLE - -#define RTL8367C_DOT1X_PORT_AUTH_REG RTL8367C_REG_DOT1X_PORT_AUTH - -#define RTL8367C_DOT1X_PORT_OPDIR_REG RTL8367C_REG_DOT1X_PORT_OPDIR - -#define RTL8367C_DOT1X_UNAUTH_ACT_BASE RTL8367C_REG_DOT1X_UNAUTH_ACT_W0 -#define RTL8367C_DOT1X_UNAUTH_ACT_OFFSET(port) ((port & 0x7) << 1) -#define RTL8367C_DOT1X_UNAUTH_ACT_MASK(port) (RTL8367C_DOT1X_PORT0_UNAUTHBH_MASK << RTL8367C_DOT1X_UNAUTH_ACT_OFFSET(port)) - -#define RTL8367C_DOT1X_CFG_REG RTL8367C_REG_DOT1X_CFG - -#define RTL8367C_REG_L2_LRN_CNT_BASE RTL8367C_REG_L2_LRN_CNT_CTRL0 -#define RTL8367C_REG_L2_LRN_CNT_REG(port) (RTL8367C_REG_L2_LRN_CNT_BASE + port) - -/* (16'h0b00) mltvlan_reg */ - -#define RTL8367C_SVLAN_MCAST2S_ENTRY_BASE_REG(index) (RTL8367C_REG_SVLAN_MCAST2S_ENTRY0_CTRL0 + index*5) - -/* (16'h0c00) svlan_reg */ - -#define RTL8367C_SVLAN_MEMBERCFG_BASE_REG(index) (RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL1 + index*3) -#define RTL8367C_SVLAN_C2SCFG_BASE_REG(index) (RTL8367C_REG_SVLAN_C2SCFG0_CTRL0+ index*3) -#define RTL8367C_SVLAN_CFG_REG RTL8367C_REG_SVLAN_CFG - -/* (16'h0f00) hsactrl_reg */ - -#define RTL8367C_SVLAN_S2C_ENTRY_BASE_REG(index) (RTL8367C_REG_SVLAN_SP2C_ENTRY0_CTRL0 + index*2) - -/* (16'h1000) mib_reg */ - -#define RTL8367C_MIB_COUNTER_BASE_REG RTL8367C_REG_MIB_COUNTER0 - -#define RTL8367C_MIB_ADDRESS_REG RTL8367C_REG_MIB_ADDRESS - -#define RTL8367C_MIB_CTRL_REG RTL8367C_REG_MIB_CTRL0 -#define RTL8367C_MIB_PORT07_MASK (0xFF<> 4)) -#define RTL8367C_REG_METER_EXCEED_INDICATOR_OFFSET(meter) (meter & 0xF) - -/* (16'h1200) swcore_reg */ - -#define RTL8367C_VS_TPID_REG RTL8367C_REG_VS_TPID - -#define RTL8367C_SWITCH_MAC_BASE RTL8367C_REG_SWITCH_MAC0 - -#define RTL8367C_REMARKING_CTRL_REG RTL8367C_REG_SWITCH_CTRL0 - -#define RTL8367C_QOS_DSCP_REMARK_BASE RTL8367C_REG_QOS_DSCP_REMARK_CTRL0 -#define RTL8367C_QOS_DSCP_REMARK_REG(pri) (RTL8367C_QOS_DSCP_REMARK_BASE + (pri >> 1)) -#define RTL8367C_QOS_DSCP_REMARK_OFFSET(pri) (((pri) & 0x1) << 3) -#define RTL8367C_QOS_DSCP_REMARK_MASK(pri) (0x3F << RTL8367C_QOS_DSCP_REMARK_OFFSET(pri)) - -#define RTL8367C_QOS_1Q_REMARK_BASE RTL8367C_REG_QOS_1Q_REMARK_CTRL0 -#define RTL8367C_QOS_1Q_REMARK_REG(pri) (RTL8367C_QOS_1Q_REMARK_BASE + (pri >> 2)) -#define RTL8367C_QOS_1Q_REMARK_OFFSET(pri) ((pri & 0x3) << 2) -#define RTL8367C_QOS_1Q_REMARK_MASK(pri) (0x7 << RTL8367C_QOS_1Q_REMARK_OFFSET(pri)) - -#define RTL8367C_PTKGEN_PAYLOAD_CTRL0_REG RTL8367C_REG_PTKGEN_PAYLOAD_CTRL0 - -#define RTL8367C_PTKGEN_PAYLOAD_CTRL1_REG RTL8367C_REG_PTKGEN_PAYLOAD_CTRL1 - -#define RTL8367C_SVLAN_UPLINK_PORTMASK_REG RTL8367C_REG_SVLAN_UPLINK_PORTMASK - -#define RTL8367C_CPU_PORT_MASK_REG RTL8367C_REG_CPU_PORT_MASK - -#define RTL8367C_CPU_CTRL_REG RTL8367C_REG_CPU_CTRL - -#define RTL8367C_MIRROR_CTRL_REG RTL8367C_REG_MIRROR_CTRL - - -#define RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_BASE RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL0 -#define RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG(port) (RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_BASE + (port >> 1)) -#define RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG_OFFSET(port) ((port & 0x1) << 3) -#define RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG_MASK(port) (RTL8367C_PORT0_QUEUE_MASK_MASK << RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG_OFFSET(port)) - - -#define RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_BASE RTL8367C_REG_FLOWCTRL_PORT0_PAGE_COUNTER -#define RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_REG(port) (RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_BASE + port) -#define RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_MASK RTL8367C_FLOWCTRL_PORT0_PAGE_COUNTER_MASK - -#define RTL8367C_FLOWCTRL_PORT_PAGE_MAX_BASE RTL8367C_REG_FLOWCTRL_PORT0_PAGE_MAX -#define RTL8367C_FLOWCTRL_PORT_PAGE_MAX_REG(port) (RTL8367C_FLOWCTRL_PORT_PAGE_MAX_BASE + port) -#define RTL8367C_FLOWCTRL_PORT_PAGE_MAX_MASK RTL8367C_FLOWCTRL_PORT0_PAGE_MAX_MASK - -#define RTL8367C_FIELD_SELECTOR_REG(index) (RTL8367C_REG_FIELD_SELECTOR0 + index) -#define RTL8367C_FIELD_SELECTOR_ENABLE_OFFSET RTL8367C_FIELD_SELECTOR0_ENABLE_OFFSET -#define RTL8367C_FIELD_SELECTOR_ENABLE_MASK RTL8367C_FIELD_SELECTOR0_ENABLE_MASK -#define RTL8367C_FIELD_SELECTOR_FORMAT_OFFSET RTL8367C_FIELD_SELECTOR0_FORMAT_OFFSET -#define RTL8367C_FIELD_SELECTOR_FORMAT_MASK RTL8367C_FIELD_SELECTOR0_FORMAT_MASK -#define RTL8367C_FIELD_SELECTOR_OFFSET_OFFSET RTL8367C_FIELD_SELECTOR0_OFFSET_OFFSET -#define RTL8367C_FIELD_SELECTOR_OFFSET_MASK RTL8367C_FIELD_SELECTOR0_OFFSET_MASK - -/* (16'h1300) chip_reg*/ - -/* (16'h1400) mtrpool_reg */ -#define RTL8367C_METER_RATE_BASE RTL8367C_REG_METER0_RATE_CTRL0 -#define RTL8367C_METER_RATE_REG(meter) ((meter << 1) + RTL8367C_METER_RATE_BASE) - -#define RTL8367C_METER_BUCKET_SIZE_BASE RTL8367C_REG_METER0_BUCKET_SIZE -#define RTL8367C_METER_BUCKET_SIZE_REG(meter) (RTL8367C_METER_BUCKET_SIZE_BASE + meter) - -#define RTL8367C_LEAKY_BUCKET_TICK_REG RTL8367C_REG_METER_CTRL0 -#define RTL8367C_LEAKY_BUCKET_TICK_OFFSET RTL8367C_METER_TICK_OFFSET -#define RTL8367C_LEAKY_BUCKET_TICK_MASK RTL8367C_METER_TICK_MASK - -#define RTL8367C_LEAKY_BUCKET_TOKEN_REG RTL8367C_REG_METER_CTRL1 -#define RTL8367C_LEAKY_BUCKET_TOKEN_OFFSET RTL8367C_METER_CTRL1_OFFSET -#define RTL8367C_LEAKY_BUCKET_TOKEN_MASK RTL8367C_METER_CTRL1_MASK - -#define RTL8367C_METER_OVERRATE_INDICATOR_BASE RTL8367C_REG_METER_OVERRATE_INDICATOR0 -#define RTL8367C_METER_OVERRATE_INDICATOR_REG(meter) (RTL8367C_METER_OVERRATE_INDICATOR_BASE + (meter >> 4)) -#define RTL8367C_METER_EXCEED_OFFSET(meter) (meter & 0xF) -#define RTL8367C_METER_EXCEED_MASK(meter) (1 << RTL8367C_METER_EXCEED_OFFSET(meter)) - -#define RTL8367C_METER_IFG_CTRL_BASE RTL8367C_REG_METER_IFG_CTRL0 -#define RTL8367C_METER_IFG_CTRL_REG(meter) (RTL8367C_METER_IFG_CTRL_BASE + (meter >> 4)) -#define RTL8367C_METER_IFG_OFFSET(meter) (meter & 0xF) -#define RTL8367C_METER_IFG_MASK(meter) (1 << RTL8367C_METER_IFG_OFFSET(meter)) - -#define RTL8367C_FLOWCTRL_CTRL_REG RTL8367C_REG_FLOWCTRL_CTRL0 - -/* (16'h1800)8051_RLDP_EEE_reg */ -#define RTL8367C_EEELLDP_CTRL0_REG RTL8367C_REG_EEELLDP_CTRL0 - -#define RTL8367C_EEELLDP_CTRL1_REG RTL8367C_REG_EEELLDP_CTRL1 - -#define RTL8367C_EEELLDP_PMSK_REG RTL8367C_REG_EEELLDP_PMSK - -#define RTL8367C_EEELLDP_TX_FRAMEU_REG_BASE RTL8367C_REG_EEELLDP_FRAMEU00 - -#define RTL8367C_EEELLDP_TX_CAP_FRAMEL_REG_BASE RTL8367C_REG_EEELLDP_CAP_FRAMEL00 - -#define RTL8367C_EEELLDP_RX_VALUE_PORT_BASE RTL8367C_REG_EEELLDP_RX_VALUE_P00_00 -#define RTL8367C_EEELLDP_RX_VALUE_PORT_REG(port) (RTL8367C_EEELLDP_RX_VALUE_PORT_BASE + (port * 9)) - -#define RTL8367C_RLDP_CTRL0_REG RTL8367C_REG_RLDP_CTRL0 -#define RTL8367C_RLDP_MODE_OFFSET 14 - -#define RTL8367C_RLDP_RETRY_COUNT_REG RTL8367C_REG_RLDP_CTRL1 - -#define RTL8367C_RLDP_RETRY_PERIOD_LOOPSTATE_REG RTL8367C_REG_RLDP_CTRL2 - -#define RTL8367C_RLDP_RETRY_PERIOD_CHKSTATE_REG RTL8367C_REG_RLDP_CTRL3 - -#define RTL8367C_RLDP_TX_PMSK_REG RTL8367C_REG_RLDP_CTRL4 - -#define RTL8367C_RLDP_RAND_NUM_REG_BASE RTL8367C_REG_RLDP_RAND_NUM0 - -#define RTL8367C_RLDP_MAGIC_NUM_REG_BASE RTL8367C_REG_RLDP_MAGIC_NUM0 - -#define RTL8367C_RLDP_LOOP_PMSK_REG RTL8367C_REG_RLDP_LOOPSTATUS_INDICATOR - -#define RTL8367C_RLDP_LOOP_PORT_BASE RTL8367C_REG_RLDP_LOOP_PORT_REG0 -#define RTL8367C_RLDP_LOOP_PORT_REG(port) (RTL8367C_RLDP_LOOP_PORT_BASE + (port >> 1)) -#define RTL8367C_RLDP_LOOP_PORT_OFFSET(port) ((port & 0x1) << 3) -#define RTL8367C_RLDP_LOOP_PORT_MASK(port) (RTL8367C_RLDP_LOOP_PORT_00_MASK << RTL8367C_RLDP_LOOP_PORT_OFFSET(port)) - -#define RTL8367C_PAGEMETER_PORT_BASE RTL8367C_REG_PAGEMETER_PORT0_CTRL0 -#define RTL8367C_PAGEMETER_PORT_REG(port) (RTL8367C_PAGEMETER_PORT_BASE + 0x20*port) - -#define RTL8367C_HIGHPRI_INDICATOR_REG RTL8367C_REG_HIGHPRI_INDICATOR -#define RTL8367C_PORT_INDICATOR_OFFSET(port) (port) -#define RTL8367C_PORT_INDICATOR_MASK(port) (RTL8367C_PORT0_INDICATOR_MASK << RTL8367C_PORT_INDICATOR_OFFSET(port)) - -#define RTL8367C_HIGHPRI_CFG_REG RTL8367C_REG_HIGHPRI_CFG - -#define RTL8367C_EAV_PRIORITY_REMAPPING_BASE RTL8367C_REG_EAV_CTRL1 -#define RTL8367C_EAV_PRIORITY_REMAPPING_REG(pri) (RTL8367C_EAV_PRIORITY_REMAPPING_BASE + (pri >> 2)) -#define RTL8367C_EAV_PRIORITY_REMAPPING_OFFSET(pri) ((pri & 0x3) * RTL8367C_REMAP_EAV_PRI1_REGEN_OFFSET) -#define RTL8367C_EAV_PRIORITY_REMAPPING_MASK(pri) (RTL8367C_REMAP_EAV_PRI0_REGEN_MASK << RTL8367C_EAV_PRIORITY_REMAPPING_OFFSET(pri)) - -#define RTL8367C_EEEP_CFG_BASE RTL8367C_REG_PORT0_EEECFG -#define RTL8367C_EEEP_CFG_REG(port) (RTL8367C_EEEP_CFG_BASE + (port*0x20)) - -#define RTL8367C_PKG_CFG_BASE RTL8367C_REG_PKTGEN_PORT0_CTRL -#define RTL8367C_PKG_CFG_REG(port) (RTL8367C_PKG_CFG_BASE + (port*0x20)) - -#define RTL8367C_PKG_DA_BASE RTL8367C_REG_PKTGEN_PORT0_DA0 -#define RTL8367C_PKG_DA_REG(port) (RTL8367C_PKG_DA_BASE + (port*0x20)) - -#define RTL8367C_PKG_SA_BASE RTL8367C_REG_PKTGEN_PORT0_SA0 -#define RTL8367C_PKG_SA_REG(port) (RTL8367C_PKG_SA_BASE + (port*0x20)) - -#define RTL8367C_PKG_NUM_BASE RTL8367C_REG_PKTGEN_PORT0_COUNTER0 -#define RTL8367C_PKG_NUM_REG(port) (RTL8367C_PKG_NUM_BASE + (port*0x20)) - -#define RTL8367C_PKG_LENGTH_BASE RTL8367C_REG_PKTGEN_PORT0_TX_LENGTH -#define RTL8367C_PKG_LENGTH_REG(port) (RTL8367C_PKG_LENGTH_BASE + (port*0x20)) - -/* (16'h1c00)IGMP_MLD_reg */ -#define RTL8367C_IGMP_GROUP_USAGE_BASE RTL8367C_REG_IGMP_GROUP_USAGE_LIST0 -#define RTL8367C_IGMP_GROUP_USAGE_REG(idx) (RTL8367C_IGMP_GROUP_USAGE_BASE + (idx / 16)) - -#define RTL8367C_FALLBACK_BASE RTL8367C_REG_FALLBACK_PORT0_CFG0 -#define RTL8367C_FALLBACK_PORT_CFG_REG(port) (RTL8367C_FALLBACK_BASE + (port * 4)) -#define RTL8367C_FALLBACK_PORT_MON_CNT_REG(port) (RTL8367C_FALLBACK_BASE + 1 + (port * 4)) -#define RTL8367C_FALLBACK_PORT_ERR_CNT_REG(port) (RTL8367C_FALLBACK_BASE + 3 + (port * 4)) - - -/* (16'h6400)timer_1588 */ -#define RTL8367C_EAV_CFG_BASE RTL8367C_REG_P0_EAV_CFG -#define RTL8367C_EAV_PORT_CFG_REG(port) (RTL8367C_EAV_CFG_BASE + (port *0x10)) -#define RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET RTL8367C_P0_EAV_CFG_PTP_PHY_EN_EN_OFFSET -#define RTL8367C_EAV_CFG_RX_PDELAY_RESP_OFFSET RTL8367C_P0_EAV_CFG_RX_PDELAY_RESP_OFFSET -#define RTL8367C_EAV_CFG_RX_PDELAY_REQ_OFFSET RTL8367C_P0_EAV_CFG_RX_PDELAY_REQ_OFFSET -#define RTL8367C_EAV_CFG_RX_DELAY_REQ_OFFSET RTL8367C_P0_EAV_CFG_RX_DELAY_REQ_OFFSET -#define RTL8367C_EAV_CFG_RX_SYNC_OFFSET RTL8367C_P0_EAV_CFG_RX_SYNC_OFFSET -#define RTL8367C_EAV_CFG_TX_PDELAY_RESP_OFFSET RTL8367C_P0_EAV_CFG_TX_PDELAY_RESP_OFFSET -#define RTL8367C_EAV_CFG_TX_PDELAY_REQ_OFFSET RTL8367C_P0_EAV_CFG_TX_PDELAY_REQ_OFFSET -#define RTL8367C_EAV_CFG_TX_DELAY_REQ_OFFSET RTL8367C_P0_EAV_CFG_TX_DELAY_REQ_OFFSET -#define RTL8367C_EAV_CFG_TX_SYNC_OFFSET RTL8367C_P0_EAV_CFG_TX_SYNC_OFFSET - -#define RTL8367C_REG_TX_SYNC_SEQ_ID_BASE RTL8367C_REG_P0_TX_SYNC_SEQ_ID -#define RTL8367C_REG_TX_SYNC_SEQ_ID(port) (RTL8367C_REG_TX_SYNC_SEQ_ID_BASE + (port *0x10)) -#define RTL8367C_REG_SEQ_ID(port, type) (RTL8367C_REG_TX_SYNC_SEQ_ID_BASE + type + (port *0x10)) - -#define RTL8367C_REG_TX_DELAY_REQ_SEQ_ID_BASE RTL8367C_REG_P0_TX_DELAY_REQ_SEQ_ID -#define RTL8367C_REG_TX_PDELAY_REQ_SEQ_ID_BASE RTL8367C_REG_P0_TX_PDELAY_REQ_SEQ_ID -#define RTL8367C_REG_TX_PDELAY_RESP_SEQ_ID_BASE RTL8367C_REG_P0_TX_PDELAY_RESP_SEQ_ID -#define RTL8367C_REG_RX_SYNC_SEQ_ID_BASE RTL8367C_REG_P0_RX_SYNC_SEQ_ID -#define RTL8367C_REG_RX_DELAY_REQ_SEQ_ID_BASE RTL8367C_REG_P0_RX_DELAY_REQ_SEQ_ID -#define RTL8367C_REG_RX_PDELAY_REQ_SEQ_ID_BASE RTL8367C_REG_P0_RX_PDELAY_REQ_SEQ_ID -#define RTL8367C_REG_RX_PDELAY_RESP_SEQ_ID_BASE RTL8367C_REG_P0_RX_PDELAY_RESP_SEQ_ID - -#define RTL8367C_REG_PORT_NSEC_L_BASE RTL8367C_REG_P0_PORT_NSEC_15_0 -#define RTL8367C_REG_PORT_NSEC_L(port) (RTL8367C_REG_PORT_NSEC_L_BASE + (port *0x10)) -#define RTL8367C_REG_PORT_NSEC_H_BASE RTL8367C_REG_P0_PORT_NSEC_26_16 -#define RTL8367C_REG_PORT_NSEC_H(port) (RTL8367C_REG_PORT_NSEC_H_BASE + (port *0x10)) -#define RTL8367C_PORT_NSEC_H_OFFSET RTL8367C_P0_PORT_NSEC_26_16_OFFSET -#define RTL8367C_PORT_NSEC_H_MASK RTL8367C_P0_PORT_NSEC_26_16_MASK - -#define RTL8367C_REG_PORT_SEC_L_BASE RTL8367C_REG_P0_PORT_SEC_15_0 -#define RTL8367C_REG_PORT_SEC_L(port) (RTL8367C_REG_PORT_SEC_L_BASE + (port *0x10)) -#define RTL8367C_REG_PORT_SEC_H_BASE RTL8367C_REG_P0_PORT_SEC_31_16 -#define RTL8367C_REG_PORT_SEC_H(port) (RTL8367C_REG_PORT_SEC_H_BASE + (port *0x10)) - -#endif /*#ifndef _RTL8367C_BASE_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_reg.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_reg.h deleted file mode 100644 index eb4f48b83e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/rtl8367c_reg.h +++ /dev/null @@ -1,22819 +0,0 @@ -#ifndef _RTL8367C_REG_H_ -#define _RTL8367C_REG_H_ - -/************************************************************ -auto-generated register address and field data -*************************************************************/ - -/* (16'h0000)port_reg */ - -#define RTL8367C_REG_PORT0_CGST_HALF_CFG 0x0000 -#define RTL8367C_PORT0_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT0_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT0_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT0_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT0_CTRL 0x0001 -#define RTL8367C_PKTGEN_PORT0_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT0_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT0_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT0_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT0_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT0_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT0_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT0_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT0 0x0002 -#define RTL8367C_TX_ERR_CNT_PORT0_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT0_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT0_DA0 0x0003 - -#define RTL8367C_REG_PKTGEN_PORT0_DA1 0x0004 - -#define RTL8367C_REG_PKTGEN_PORT0_DA2 0x0005 - -#define RTL8367C_REG_PKTGEN_PORT0_SA0 0x0006 - -#define RTL8367C_REG_PKTGEN_PORT0_SA1 0x0007 - -#define RTL8367C_REG_PKTGEN_PORT0_SA2 0x0008 - -#define RTL8367C_REG_PKTGEN_PORT0_COUNTER0 0x0009 - -#define RTL8367C_REG_PKTGEN_PORT0_COUNTER1 0x000a -#define RTL8367C_PKTGEN_PORT0_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT0_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT0_TX_LENGTH 0x000b -#define RTL8367C_PKTGEN_PORT0_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT0_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT0_TIMER 0x000d -#define RTL8367C_PKTGEN_PORT0_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT0_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT0_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT0_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT0_MISC_CFG 0x000e -#define RTL8367C_PORT0_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT0_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT0_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT0_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT0_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT0_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT0_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT0_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT0_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT0_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT0_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT0_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT0_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT0_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT0_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT0_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT0_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT0_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT0_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT0_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT0_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT0_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT0_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT0_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT0_RATE_CTRL0 0x000f - -#define RTL8367C_REG_INGRESSBW_PORT0_RATE_CTRL1 0x0010 -#define RTL8367C_INGRESSBW_PORT0_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT0_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT0_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT0_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT0_FORCE_RATE0 0x0011 - -#define RTL8367C_REG_PORT0_FORCE_RATE1 0x0012 - -#define RTL8367C_REG_PORT0_CURENT_RATE0 0x0013 - -#define RTL8367C_REG_PORT0_CURENT_RATE1 0x0014 - -#define RTL8367C_REG_PORT0_PAGE_COUNTER 0x0015 -#define RTL8367C_PORT0_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT0_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT0_CTRL0 0x0016 - -#define RTL8367C_REG_PAGEMETER_PORT0_CTRL1 0x0017 - -#define RTL8367C_REG_PORT0_EEECFG 0x0018 -#define RTL8367C_PORT0_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT0_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT0_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT0_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT0_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT0_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT0_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT0_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT0_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT0_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT0_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT0_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT0_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT0_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT0_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT0_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT0_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT0_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT0_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT0_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT0_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT0_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT0_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT0_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT0_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT0_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT0_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT0_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT0_EEETXMTR 0x0019 - -#define RTL8367C_REG_PORT0_EEERXMTR 0x001a - -#define RTL8367C_REG_PORT0_EEEPTXMTR 0x001b - -#define RTL8367C_REG_PORT0_EEEPRXMTR 0x001c - -#define RTL8367C_REG_PTP_PORT0_CFG1 0x001e -#define RTL8367C_PTP_PORT0_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT0_CFG1_MASK 0xFF - -#define RTL8367C_REG_P0_MSIC1 0x001f -#define RTL8367C_P0_MSIC1_OFFSET 0 -#define RTL8367C_P0_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT1_CGST_HALF_CFG 0x0020 -#define RTL8367C_PORT1_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT1_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT1_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT1_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT1_CTRL 0x0021 -#define RTL8367C_PKTGEN_PORT1_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT1_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT1_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT1_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT1_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT1_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT1_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT1_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT1 0x0022 -#define RTL8367C_TX_ERR_CNT_PORT1_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT1_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT1_DA0 0x0023 - -#define RTL8367C_REG_PKTGEN_PORT1_DA1 0x0024 - -#define RTL8367C_REG_PKTGEN_PORT1_DA2 0x0025 - -#define RTL8367C_REG_PKTGEN_PORT1_SA0 0x0026 - -#define RTL8367C_REG_PKTGEN_PORT1_SA1 0x0027 - -#define RTL8367C_REG_PKTGEN_PORT1_SA2 0x0028 - -#define RTL8367C_REG_PKTGEN_PORT1_COUNTER0 0x0029 - -#define RTL8367C_REG_PKTGEN_PORT1_COUNTER1 0x002a -#define RTL8367C_PKTGEN_PORT1_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT1_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT1_TX_LENGTH 0x002b -#define RTL8367C_PKTGEN_PORT1_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT1_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT1_TIMER 0x002d -#define RTL8367C_PKTGEN_PORT1_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT1_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT1_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT1_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT1_MISC_CFG 0x002e -#define RTL8367C_PORT1_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT1_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT1_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT1_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT1_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT1_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT1_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT1_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT1_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT1_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT1_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT1_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT1_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT1_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT1_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT1_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT1_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT1_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT1_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT1_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT1_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT1_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT1_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT1_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT1_RATE_CTRL0 0x002f - -#define RTL8367C_REG_INGRESSBW_PORT1_RATE_CTRL1 0x0030 -#define RTL8367C_INGRESSBW_PORT1_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT1_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT1_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT1_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT1_FORCE_RATE0 0x0031 - -#define RTL8367C_REG_PORT1_FORCE_RATE1 0x0032 - -#define RTL8367C_REG_PORT1_CURENT_RATE0 0x0033 - -#define RTL8367C_REG_PORT1_CURENT_RATE1 0x0034 - -#define RTL8367C_REG_PORT1_PAGE_COUNTER 0x0035 -#define RTL8367C_PORT1_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT1_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT1_CTRL0 0x0036 - -#define RTL8367C_REG_PAGEMETER_PORT1_CTRL1 0x0037 - -#define RTL8367C_REG_PORT1_EEECFG 0x0038 -#define RTL8367C_PORT1_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT1_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT1_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT1_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT1_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT1_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT1_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT1_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT1_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT1_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT1_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT1_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT1_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT1_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT1_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT1_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT1_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT1_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT1_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT1_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT1_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT1_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT1_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT1_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT1_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT1_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT1_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT1_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT1_EEETXMTR 0x0039 - -#define RTL8367C_REG_PORT1_EEERXMTR 0x003a - -#define RTL8367C_REG_PORT1_EEEPTXMTR 0x003b - -#define RTL8367C_REG_PORT1_EEEPRXMTR 0x003c - -#define RTL8367C_REG_PTP_PORT1_CFG1 0x003e -#define RTL8367C_PTP_PORT1_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT1_CFG1_MASK 0xFF - -#define RTL8367C_REG_P1_MSIC1 0x003f -#define RTL8367C_P1_MSIC1_OFFSET 0 -#define RTL8367C_P1_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT2_CGST_HALF_CFG 0x0040 -#define RTL8367C_PORT2_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT2_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT2_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT2_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT2_CTRL 0x0041 -#define RTL8367C_PKTGEN_PORT2_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT2_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT2_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT2_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT2_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT2_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT2_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT2_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT2 0x0042 -#define RTL8367C_TX_ERR_CNT_PORT2_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT2_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT2_DA0 0x0043 - -#define RTL8367C_REG_PKTGEN_PORT2_DA1 0x0044 - -#define RTL8367C_REG_PKTGEN_PORT2_DA2 0x0045 - -#define RTL8367C_REG_PKTGEN_PORT2_SA0 0x0046 - -#define RTL8367C_REG_PKTGEN_PORT2_SA1 0x0047 - -#define RTL8367C_REG_PKTGEN_PORT2_SA2 0x0048 - -#define RTL8367C_REG_PKTGEN_PORT2_COUNTER0 0x0049 - -#define RTL8367C_REG_PKTGEN_PORT2_COUNTER1 0x004a -#define RTL8367C_PKTGEN_PORT2_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT2_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT2_TX_LENGTH 0x004b -#define RTL8367C_PKTGEN_PORT2_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT2_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT2_TIMER 0x004d -#define RTL8367C_PKTGEN_PORT2_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT2_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT2_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT2_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT2_MISC_CFG 0x004e -#define RTL8367C_PORT2_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT2_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT2_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT2_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT2_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT2_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT2_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT2_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT2_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT2_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT2_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT2_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT2_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT2_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT2_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT2_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT2_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT2_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT2_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT2_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT2_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT2_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT2_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT2_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT2_RATE_CTRL0 0x004f - -#define RTL8367C_REG_INGRESSBW_PORT2_RATE_CTRL1 0x0050 -#define RTL8367C_INGRESSBW_PORT2_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT2_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT2_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT2_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT2_FORCE_RATE0 0x0051 - -#define RTL8367C_REG_PORT2_FORCE_RATE1 0x0052 - -#define RTL8367C_REG_PORT2_CURENT_RATE0 0x0053 - -#define RTL8367C_REG_PORT2_CURENT_RATE1 0x0054 - -#define RTL8367C_REG_PORT2_PAGE_COUNTER 0x0055 -#define RTL8367C_PORT2_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT2_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT2_CTRL0 0x0056 - -#define RTL8367C_REG_PAGEMETER_PORT2_CTRL1 0x0057 - -#define RTL8367C_REG_PORT2_EEECFG 0x0058 -#define RTL8367C_PORT2_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT2_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT2_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT2_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT2_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT2_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT2_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT2_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT2_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT2_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT2_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT2_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT2_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT2_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT2_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT2_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT2_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT2_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT2_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT2_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT2_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT2_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT2_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT2_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT2_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT2_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT2_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT2_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT2_EEETXMTR 0x0059 - -#define RTL8367C_REG_PORT2_EEERXMTR 0x005a - -#define RTL8367C_REG_PORT2_EEEPTXMTR 0x005b - -#define RTL8367C_REG_PORT2_EEEPRXMTR 0x005c - -#define RTL8367C_REG_PTP_PORT2_CFG1 0x005e -#define RTL8367C_PTP_PORT2_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT2_CFG1_MASK 0xFF - -#define RTL8367C_REG_P2_MSIC1 0x005f -#define RTL8367C_P2_MSIC1_OFFSET 0 -#define RTL8367C_P2_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT3_CGST_HALF_CFG 0x0060 -#define RTL8367C_PORT3_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT3_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT3_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT3_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT3_CTRL 0x0061 -#define RTL8367C_PKTGEN_PORT3_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT3_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT3_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT3_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT3_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT3_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT3_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT3_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT3 0x0062 -#define RTL8367C_TX_ERR_CNT_PORT3_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT3_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT3_DA0 0x0063 - -#define RTL8367C_REG_PKTGEN_PORT3_DA1 0x0064 - -#define RTL8367C_REG_PKTGEN_PORT3_DA2 0x0065 - -#define RTL8367C_REG_PKTGEN_PORT3_SA0 0x0066 - -#define RTL8367C_REG_PKTGEN_PORT3_SA1 0x0067 - -#define RTL8367C_REG_PKTGEN_PORT3_SA2 0x0068 - -#define RTL8367C_REG_PKTGEN_PORT3_COUNTER0 0x0069 - -#define RTL8367C_REG_PKTGEN_PORT3_COUNTER1 0x006a -#define RTL8367C_PKTGEN_PORT3_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT3_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT3_TX_LENGTH 0x006b -#define RTL8367C_PKTGEN_PORT3_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT3_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT3_TIMER 0x006d -#define RTL8367C_PKTGEN_PORT3_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT3_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT3_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT3_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT3_MISC_CFG 0x006e -#define RTL8367C_PORT3_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT3_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT3_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT3_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT3_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT3_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT3_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT3_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT3_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT3_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT3_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT3_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT3_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT3_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT3_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT3_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT3_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT3_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT3_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT3_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT3_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT3_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT3_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT3_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT3_RATE_CTRL0 0x006f - -#define RTL8367C_REG_INGRESSBW_PORT3_RATE_CTRL1 0x0070 -#define RTL8367C_INGRESSBW_PORT3_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT3_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT3_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT3_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT3_FORCE_RATE0 0x0071 - -#define RTL8367C_REG_PORT3_FORCE_RATE1 0x0072 - -#define RTL8367C_REG_PORT3_CURENT_RATE0 0x0073 - -#define RTL8367C_REG_PORT3_CURENT_RATE1 0x0074 - -#define RTL8367C_REG_PORT3_PAGE_COUNTER 0x0075 -#define RTL8367C_PORT3_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT3_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT3_CTRL0 0x0076 - -#define RTL8367C_REG_PAGEMETER_PORT3_CTRL1 0x0077 - -#define RTL8367C_REG_PORT3_EEECFG 0x0078 -#define RTL8367C_PORT3_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT3_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT3_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT3_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT3_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT3_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT3_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT3_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT3_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT3_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT3_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT3_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT3_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT3_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT3_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT3_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT3_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT3_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT3_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT3_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT3_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT3_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT3_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT3_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT3_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT3_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT3_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT3_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT3_EEETXMTR 0x0079 - -#define RTL8367C_REG_PORT3_EEERXMTR 0x007a - -#define RTL8367C_REG_PORT3_EEEPTXMTR 0x007b - -#define RTL8367C_REG_PORT3_EEEPRXMTR 0x007c - -#define RTL8367C_REG_PTP_PORT3_CFG1 0x007e -#define RTL8367C_PTP_PORT3_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT3_CFG1_MASK 0xFF - -#define RTL8367C_REG_P3_MSIC1 0x007f -#define RTL8367C_P3_MSIC1_OFFSET 0 -#define RTL8367C_P3_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT4_CGST_HALF_CFG 0x0080 -#define RTL8367C_PORT4_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT4_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT4_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT4_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT4_CTRL 0x0081 -#define RTL8367C_PKTGEN_PORT4_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT4_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT4_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT4_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT4_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT4_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT4_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT4_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT4 0x0082 -#define RTL8367C_TX_ERR_CNT_PORT4_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT4_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT4_DA0 0x0083 - -#define RTL8367C_REG_PKTGEN_PORT4_DA1 0x0084 - -#define RTL8367C_REG_PKTGEN_PORT4_DA2 0x0085 - -#define RTL8367C_REG_PKTGEN_PORT4_SA0 0x0086 - -#define RTL8367C_REG_PKTGEN_PORT4_SA1 0x0087 - -#define RTL8367C_REG_PKTGEN_PORT4_SA2 0x0088 - -#define RTL8367C_REG_PKTGEN_PORT4_COUNTER0 0x0089 - -#define RTL8367C_REG_PKTGEN_PORT4_COUNTER1 0x008a -#define RTL8367C_PKTGEN_PORT4_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT4_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT4_TX_LENGTH 0x008b -#define RTL8367C_PKTGEN_PORT4_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT4_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT4_TIMER 0x008d -#define RTL8367C_PKTGEN_PORT4_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT4_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT4_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT4_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT4_MISC_CFG 0x008e -#define RTL8367C_PORT4_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT4_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT4_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT4_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT4_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT4_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT4_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT4_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT4_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT4_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT4_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT4_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT4_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT4_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT4_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT4_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT4_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT4_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT4_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT4_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT4_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT4_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT4_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT4_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT4_RATE_CTRL0 0x008f - -#define RTL8367C_REG_INGRESSBW_PORT4_RATE_CTRL1 0x0090 -#define RTL8367C_INGRESSBW_PORT4_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT4_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT4_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT4_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT4_FORCE_RATE0 0x0091 - -#define RTL8367C_REG_PORT4_FORCE_RATE1 0x0092 - -#define RTL8367C_REG_PORT4_CURENT_RATE0 0x0093 - -#define RTL8367C_REG_PORT4_CURENT_RATE1 0x0094 - -#define RTL8367C_REG_PORT4_PAGE_COUNTER 0x0095 -#define RTL8367C_PORT4_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT4_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT4_CTRL0 0x0096 - -#define RTL8367C_REG_PAGEMETER_PORT4_CTRL1 0x0097 - -#define RTL8367C_REG_PORT4_EEECFG 0x0098 -#define RTL8367C_PORT4_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT4_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT4_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT4_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT4_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT4_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT4_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT4_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT4_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT4_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT4_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT4_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT4_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT4_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT4_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT4_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT4_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT4_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT4_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT4_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT4_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT4_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT4_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT4_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT4_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT4_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT4_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT4_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT4_EEETXMTR 0x0099 - -#define RTL8367C_REG_PORT4_EEERXMTR 0x009a - -#define RTL8367C_REG_PORT4_EEEPTXMTR 0x009b - -#define RTL8367C_REG_PORT4_EEEPRXMTR 0x009c - -#define RTL8367C_REG_PTP_PORT4_CFG1 0x009e -#define RTL8367C_PTP_PORT4_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT4_CFG1_MASK 0xFF - -#define RTL8367C_REG_P4_MSIC1 0x009f -#define RTL8367C_P4_MSIC1_OFFSET 0 -#define RTL8367C_P4_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT5_CGST_HALF_CFG 0x00a0 -#define RTL8367C_PORT5_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT5_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT5_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT5_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT5_CTRL 0x00a1 -#define RTL8367C_PKTGEN_PORT5_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT5_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT5_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT5_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT5_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT5_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT5_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT5_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT5 0x00a2 -#define RTL8367C_TX_ERR_CNT_PORT5_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT5_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT5_DA0 0x00a3 - -#define RTL8367C_REG_PKTGEN_PORT5_DA1 0x00a4 - -#define RTL8367C_REG_PKTGEN_PORT5_DA2 0x00a5 - -#define RTL8367C_REG_PKTGEN_PORT5_SA0 0x00a6 - -#define RTL8367C_REG_PKTGEN_PORT5_SA1 0x00a7 - -#define RTL8367C_REG_PKTGEN_PORT5_SA2 0x00a8 - -#define RTL8367C_REG_PKTGEN_PORT5_COUNTER0 0x00a9 - -#define RTL8367C_REG_PKTGEN_PORT5_COUNTER1 0x00aa -#define RTL8367C_PKTGEN_PORT5_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT5_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT5_TX_LENGTH 0x00ab -#define RTL8367C_PKTGEN_PORT5_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT5_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT5_TIMER 0x00ad -#define RTL8367C_PKTGEN_PORT5_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT5_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT5_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT5_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT5_MISC_CFG 0x00ae -#define RTL8367C_PORT5_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT5_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT5_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT5_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT5_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT5_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT5_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT5_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT5_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT5_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT5_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT5_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT5_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT5_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT5_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT5_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT5_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT5_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT5_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT5_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT5_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT5_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT5_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT5_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT5_RATE_CTRL0 0x00af - -#define RTL8367C_REG_INGRESSBW_PORT5_RATE_CTRL1 0x00b0 -#define RTL8367C_INGRESSBW_PORT5_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT5_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT5_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT5_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT5_FORCE_RATE0 0x00b1 - -#define RTL8367C_REG_PORT5_FORCE_RATE1 0x00b2 - -#define RTL8367C_REG_PORT5_CURENT_RATE0 0x00b3 - -#define RTL8367C_REG_PORT5_CURENT_RATE1 0x00b4 - -#define RTL8367C_REG_PORT5_PAGE_COUNTER 0x00b5 -#define RTL8367C_PORT5_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT5_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT5_CTRL0 0x00b6 - -#define RTL8367C_REG_PAGEMETER_PORT5_CTRL1 0x00b7 - -#define RTL8367C_REG_PORT5_EEECFG 0x00b8 -#define RTL8367C_PORT5_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT5_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT5_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT5_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT5_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT5_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT5_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT5_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT5_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT5_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT5_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT5_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT5_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT5_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT5_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT5_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT5_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT5_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT5_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT5_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT5_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT5_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT5_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT5_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT5_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT5_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT5_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT5_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT5_EEETXMTR 0x00b9 - -#define RTL8367C_REG_PORT5_EEERXMTR 0x00ba - -#define RTL8367C_REG_PORT5_EEEPTXMTR 0x00bb - -#define RTL8367C_REG_PORT5_EEEPRXMTR 0x00bc - -#define RTL8367C_REG_PTP_PORT5_CFG1 0x00be -#define RTL8367C_PTP_PORT5_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT5_CFG1_MASK 0xFF - -#define RTL8367C_REG_P5_MSIC1 0x00bf -#define RTL8367C_P5_MSIC1_OFFSET 0 -#define RTL8367C_P5_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT6_CGST_HALF_CFG 0x00c0 -#define RTL8367C_PORT6_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT6_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT6_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT6_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT6_CTRL 0x00c1 -#define RTL8367C_PKTGEN_PORT6_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT6_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT6_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT6_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT6_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT6_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT6_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT6_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT6 0x00c2 -#define RTL8367C_TX_ERR_CNT_PORT6_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT6_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT6_DA0 0x00c3 - -#define RTL8367C_REG_PKTGEN_PORT6_DA1 0x00c4 - -#define RTL8367C_REG_PKTGEN_PORT6_DA2 0x00c5 - -#define RTL8367C_REG_PKTGEN_PORT6_SA0 0x00c6 - -#define RTL8367C_REG_PKTGEN_PORT6_SA1 0x00c7 - -#define RTL8367C_REG_PKTGEN_PORT6_SA2 0x00c8 - -#define RTL8367C_REG_PKTGEN_PORT6_COUNTER0 0x00c9 - -#define RTL8367C_REG_PKTGEN_PORT6_COUNTER1 0x00ca -#define RTL8367C_PKTGEN_PORT6_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT6_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT6_TX_LENGTH 0x00cb -#define RTL8367C_PKTGEN_PORT6_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT6_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT6_TIMER 0x00cd -#define RTL8367C_PKTGEN_PORT6_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT6_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT6_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT6_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT6_MISC_CFG 0x00ce -#define RTL8367C_PORT6_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT6_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT6_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT6_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT6_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT6_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT6_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT6_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT6_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT6_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT6_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT6_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT6_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT6_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT6_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT6_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT6_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT6_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT6_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT6_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT6_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT6_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT6_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT6_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT6_RATE_CTRL0 0x00cf - -#define RTL8367C_REG_INGRESSBW_PORT6_RATE_CTRL1 0x00d0 -#define RTL8367C_INGRESSBW_PORT6_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT6_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT6_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT6_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT6_FORCE_RATE0 0x00d1 - -#define RTL8367C_REG_PORT6_FORCE_RATE1 0x00d2 - -#define RTL8367C_REG_PORT6_CURENT_RATE0 0x00d3 - -#define RTL8367C_REG_PORT6_CURENT_RATE1 0x00d4 - -#define RTL8367C_REG_PORT6_PAGE_COUNTER 0x00d5 -#define RTL8367C_PORT6_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT6_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT6_CTRL0 0x00d6 - -#define RTL8367C_REG_PAGEMETER_PORT6_CTRL1 0x00d7 - -#define RTL8367C_REG_PORT6_EEECFG 0x00d8 -#define RTL8367C_PORT6_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT6_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT6_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT6_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT6_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT6_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT6_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT6_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT6_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT6_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT6_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT6_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT6_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT6_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT6_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT6_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT6_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT6_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT6_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT6_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT6_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT6_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT6_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT6_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT6_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT6_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT6_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT6_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT6_EEETXMTR 0x00d9 - -#define RTL8367C_REG_PORT6_EEERXMTR 0x00da - -#define RTL8367C_REG_PORT6_EEEPTXMTR 0x00db - -#define RTL8367C_REG_PORT6_EEEPRXMTR 0x00dc - -#define RTL8367C_REG_PTP_PORT6_CFG1 0x00de -#define RTL8367C_PTP_PORT6_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT6_CFG1_MASK 0xFF - -#define RTL8367C_REG_P6_MSIC1 0x00df -#define RTL8367C_P6_MSIC1_OFFSET 0 -#define RTL8367C_P6_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT7_CGST_HALF_CFG 0x00e0 -#define RTL8367C_PORT7_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT7_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT7_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT7_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT7_CTRL 0x00e1 -#define RTL8367C_PKTGEN_PORT7_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT7_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT7_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT7_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT7_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT7_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT7_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT7_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT7 0x00e2 -#define RTL8367C_TX_ERR_CNT_PORT7_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT7_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT7_DA0 0x00e3 - -#define RTL8367C_REG_PKTGEN_PORT7_DA1 0x00e4 - -#define RTL8367C_REG_PKTGEN_PORT7_DA2 0x00e5 - -#define RTL8367C_REG_PKTGEN_PORT7_SA0 0x00e6 - -#define RTL8367C_REG_PKTGEN_PORT7_SA1 0x00e7 - -#define RTL8367C_REG_PKTGEN_PORT7_SA2 0x00e8 - -#define RTL8367C_REG_PKTGEN_PORT7_COUNTER0 0x00e9 - -#define RTL8367C_REG_PKTGEN_PORT7_COUNTER1 0x00ea -#define RTL8367C_PKTGEN_PORT7_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT7_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT7_TX_LENGTH 0x00eb -#define RTL8367C_PKTGEN_PORT7_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT7_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT7_TIMER 0x00ed -#define RTL8367C_PKTGEN_PORT7_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT7_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT7_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT7_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT7_MISC_CFG 0x00ee -#define RTL8367C_PORT7_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT7_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT7_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT7_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT7_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT7_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT7_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT7_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT7_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT7_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT7_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT7_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT7_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT7_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT7_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT7_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT7_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT7_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT7_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT7_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT7_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT7_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT7_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT7_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT7_RATE_CTRL0 0x00ef - -#define RTL8367C_REG_INGRESSBW_PORT7_RATE_CTRL1 0x00f0 -#define RTL8367C_INGRESSBW_PORT7_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT7_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT7_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT7_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT7_FORCE_RATE0 0x00f1 - -#define RTL8367C_REG_PORT7_FORCE_RATE1 0x00f2 - -#define RTL8367C_REG_PORT7_CURENT_RATE0 0x00f3 - -#define RTL8367C_REG_PORT7_CURENT_RATE1 0x00f4 - -#define RTL8367C_REG_PORT7_PAGE_COUNTER 0x00f5 -#define RTL8367C_PORT7_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT7_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT7_CTRL0 0x00f6 - -#define RTL8367C_REG_PAGEMETER_PORT7_CTRL1 0x00f7 - -#define RTL8367C_REG_PORT7_EEECFG 0x00f8 -#define RTL8367C_PORT7_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT7_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT7_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT7_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT7_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT7_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT7_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT7_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT7_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT7_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT7_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT7_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT7_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT7_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT7_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT7_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT7_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT7_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT7_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT7_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT7_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT7_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT7_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT7_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT7_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT7_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT7_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT7_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT7_EEETXMTR 0x00f9 - -#define RTL8367C_REG_PORT7_EEERXMTR 0x00fa - -#define RTL8367C_REG_PORT7_EEEPTXMTR 0x00fb - -#define RTL8367C_REG_PORT7_EEEPRXMTR 0x00fc - -#define RTL8367C_REG_PTP_PORT7_CFG1 0x00fe -#define RTL8367C_PTP_PORT7_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT7_CFG1_MASK 0xFF - -#define RTL8367C_REG_P7_MSIC1 0x00ff -#define RTL8367C_P7_MSIC1_OFFSET 0 -#define RTL8367C_P7_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT8_CGST_HALF_CFG 0x0100 -#define RTL8367C_PORT8_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT8_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT8_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT8_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT8_CTRL 0x0101 -#define RTL8367C_PKTGEN_PORT8_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT8_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT8_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT8_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT8_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT8_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT8_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT8_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT8 0x0102 -#define RTL8367C_TX_ERR_CNT_PORT8_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT8_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT8_DA0 0x0103 - -#define RTL8367C_REG_PKTGEN_PORT8_DA1 0x0104 - -#define RTL8367C_REG_PKTGEN_PORT8_DA2 0x0105 - -#define RTL8367C_REG_PKTGEN_PORT8_SA0 0x0106 - -#define RTL8367C_REG_PKTGEN_PORT8_SA1 0x0107 - -#define RTL8367C_REG_PKTGEN_PORT8_SA2 0x0108 - -#define RTL8367C_REG_PKTGEN_PORT8_COUNTER0 0x0109 - -#define RTL8367C_REG_PKTGEN_PORT8_COUNTER1 0x010a -#define RTL8367C_PKTGEN_PORT8_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT8_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT8_TX_LENGTH 0x010b -#define RTL8367C_PKTGEN_PORT8_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT8_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT8_TIMER 0x010d -#define RTL8367C_PKTGEN_PORT8_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT8_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT8_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT8_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT8_MISC_CFG 0x010e -#define RTL8367C_PORT8_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT8_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT8_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT8_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT8_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT8_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT8_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT8_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT8_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT8_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT8_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT8_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT8_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT8_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT8_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT8_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT8_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT8_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT8_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT8_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT8_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT8_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT8_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT8_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT8_RATE_CTRL0 0x010f - -#define RTL8367C_REG_INGRESSBW_PORT8_RATE_CTRL1 0x0110 -#define RTL8367C_INGRESSBW_PORT8_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT8_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT8_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT8_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT8_FORCE_RATE0 0x0111 - -#define RTL8367C_REG_PORT8_FORCE_RATE1 0x0112 - -#define RTL8367C_REG_PORT8_CURENT_RATE0 0x0113 - -#define RTL8367C_REG_PORT8_CURENT_RATE1 0x0114 - -#define RTL8367C_REG_PORT8_PAGE_COUNTER 0x0115 -#define RTL8367C_PORT8_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT8_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT8_CTRL0 0x0116 - -#define RTL8367C_REG_PAGEMETER_PORT8_CTRL1 0x0117 - -#define RTL8367C_REG_PORT8_EEECFG 0x0118 -#define RTL8367C_PORT8_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT8_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT8_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT8_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT8_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT8_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT8_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT8_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT8_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT8_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT8_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT8_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT8_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT8_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT8_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT8_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT8_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT8_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT8_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT8_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT8_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT8_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT8_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT8_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT8_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT8_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT8_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT8_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT8_EEETXMTR 0x0119 - -#define RTL8367C_REG_PORT8_EEERXMTR 0x011a - -#define RTL8367C_REG_PORT8_EEEPTXMTR 0x011b - -#define RTL8367C_REG_PORT8_EEEPRXMTR 0x011c - -#define RTL8367C_REG_PTP_PORT8_CFG1 0x011e -#define RTL8367C_PTP_PORT8_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT8_CFG1_MASK 0xFF - -#define RTL8367C_REG_P8_MSIC1 0x011f -#define RTL8367C_P8_MSIC1_OFFSET 0 -#define RTL8367C_P8_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT9_CGST_HALF_CFG 0x0120 -#define RTL8367C_PORT9_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT9_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT9_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT9_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT9_CTRL 0x0121 -#define RTL8367C_PKTGEN_PORT9_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT9_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT9_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT9_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT9_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT9_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT9_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT9_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT9 0x0122 -#define RTL8367C_TX_ERR_CNT_PORT9_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT9_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT9_DA0 0x0123 - -#define RTL8367C_REG_PKTGEN_PORT9_DA1 0x0124 - -#define RTL8367C_REG_PKTGEN_PORT9_DA2 0x0125 - -#define RTL8367C_REG_PKTGEN_PORT9_SA0 0x0126 - -#define RTL8367C_REG_PKTGEN_PORT9_SA1 0x0127 - -#define RTL8367C_REG_PKTGEN_PORT9_SA2 0x0128 - -#define RTL8367C_REG_PKTGEN_PORT9_COUNTER0 0x0129 - -#define RTL8367C_REG_PKTGEN_PORT9_COUNTER1 0x012a -#define RTL8367C_PKTGEN_PORT9_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT9_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT9_TX_LENGTH 0x012b -#define RTL8367C_PKTGEN_PORT9_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT9_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT9_TIMER 0x012d -#define RTL8367C_PKTGEN_PORT9_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT9_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT9_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT9_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT9_MISC_CFG 0x012e -#define RTL8367C_PORT9_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT9_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT9_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT9_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT9_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT9_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT9_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT9_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT9_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT9_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT9_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT9_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT9_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT9_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT9_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT9_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT9_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT9_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT9_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT9_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT9_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT9_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT9_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT9_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT9_RATE_CTRL0 0x012f - -#define RTL8367C_REG_INGRESSBW_PORT9_RATE_CTRL1 0x0130 -#define RTL8367C_INGRESSBW_PORT9_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT9_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT9_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT9_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT9_FORCE_RATE0 0x0131 - -#define RTL8367C_REG_PORT9_FORCE_RATE1 0x0132 - -#define RTL8367C_REG_PORT9_CURENT_RATE0 0x0133 - -#define RTL8367C_REG_PORT9_CURENT_RATE1 0x0134 - -#define RTL8367C_REG_PORT9_PAGE_COUNTER 0x0135 -#define RTL8367C_PORT9_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT9_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT9_CTRL0 0x0136 - -#define RTL8367C_REG_PAGEMETER_PORT9_CTRL1 0x0137 - -#define RTL8367C_REG_PORT9_EEECFG 0x0138 -#define RTL8367C_PORT9_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT9_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT9_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT9_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT9_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT9_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT9_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT9_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT9_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT9_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT9_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT9_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT9_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT9_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT9_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT9_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT9_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT9_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT9_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT9_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT9_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT9_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT9_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT9_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT9_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT9_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT9_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT9_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT9_EEETXMTR 0x0139 - -#define RTL8367C_REG_PORT9_EEERXMTR 0x013a - -#define RTL8367C_REG_PORT9_EEEPTXMTR 0x013b - -#define RTL8367C_REG_PORT9_EEEPRXMTR 0x013c - -#define RTL8367C_REG_PTP_PORT9_CFG1 0x013e -#define RTL8367C_PTP_PORT9_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT9_CFG1_MASK 0xFF - -#define RTL8367C_REG_P9_MSIC1 0x013f -#define RTL8367C_P9_MSIC1_OFFSET 0 -#define RTL8367C_P9_MSIC1_MASK 0x1 - -#define RTL8367C_REG_PORT10_CGST_HALF_CFG 0x0140 -#define RTL8367C_PORT10_CGST_HALF_CFG_CONGESTION_TIME_OFFSET 4 -#define RTL8367C_PORT10_CGST_HALF_CFG_CONGESTION_TIME_MASK 0xF0 -#define RTL8367C_PORT10_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT10_CGST_HALF_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_PKTGEN_PORT10_CTRL 0x0141 -#define RTL8367C_PKTGEN_PORT10_CTRL_STATUS_OFFSET 15 -#define RTL8367C_PKTGEN_PORT10_CTRL_STATUS_MASK 0x8000 -#define RTL8367C_PKTGEN_PORT10_CTRL_PKTGEN_STS_OFFSET 13 -#define RTL8367C_PKTGEN_PORT10_CTRL_PKTGEN_STS_MASK 0x2000 -#define RTL8367C_PKTGEN_PORT10_CTRL_CRC_NO_ERROR_OFFSET 4 -#define RTL8367C_PKTGEN_PORT10_CTRL_CRC_NO_ERROR_MASK 0x10 -#define RTL8367C_PKTGEN_PORT10_CTRL_CMD_START_OFFSET 0 -#define RTL8367C_PKTGEN_PORT10_CTRL_CMD_START_MASK 0x1 - -#define RTL8367C_REG_TX_ERR_CNT_PORT10 0x0142 -#define RTL8367C_TX_ERR_CNT_PORT10_OFFSET 0 -#define RTL8367C_TX_ERR_CNT_PORT10_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_PORT10_DA0 0x0143 - -#define RTL8367C_REG_PKTGEN_PORT10_DA1 0x0144 - -#define RTL8367C_REG_PKTGEN_PORT10_DA2 0x0145 - -#define RTL8367C_REG_PKTGEN_PORT10_SA0 0x0146 - -#define RTL8367C_REG_PKTGEN_PORT10_SA1 0x0147 - -#define RTL8367C_REG_PKTGEN_PORT10_SA2 0x0148 - -#define RTL8367C_REG_PKTGEN_PORT10_COUNTER0 0x0149 - -#define RTL8367C_REG_PKTGEN_PORT10_COUNTER1 0x014a -#define RTL8367C_PKTGEN_PORT10_COUNTER1_OFFSET 0 -#define RTL8367C_PKTGEN_PORT10_COUNTER1_MASK 0xFF - -#define RTL8367C_REG_PKTGEN_PORT10_TX_LENGTH 0x014b -#define RTL8367C_PKTGEN_PORT10_TX_LENGTH_OFFSET 0 -#define RTL8367C_PKTGEN_PORT10_TX_LENGTH_MASK 0x3FFF - -#define RTL8367C_REG_PKTGEN_PORT10_TIMER 0x014d -#define RTL8367C_PKTGEN_PORT10_TIMER_TIMER_OFFSET 4 -#define RTL8367C_PKTGEN_PORT10_TIMER_TIMER_MASK 0xF0 -#define RTL8367C_PKTGEN_PORT10_TIMER_RX_DMA_ERR_FLAG_OFFSET 3 -#define RTL8367C_PKTGEN_PORT10_TIMER_RX_DMA_ERR_FLAG_MASK 0x8 - -#define RTL8367C_REG_PORT10_MISC_CFG 0x014e -#define RTL8367C_PORT10_MISC_CFG_SMALL_TAG_IPG_OFFSET 15 -#define RTL8367C_PORT10_MISC_CFG_SMALL_TAG_IPG_MASK 0x8000 -#define RTL8367C_PORT10_MISC_CFG_TX_ITFSP_MODE_OFFSET 14 -#define RTL8367C_PORT10_MISC_CFG_TX_ITFSP_MODE_MASK 0x4000 -#define RTL8367C_PORT10_MISC_CFG_FLOWCTRL_INDEP_OFFSET 13 -#define RTL8367C_PORT10_MISC_CFG_FLOWCTRL_INDEP_MASK 0x2000 -#define RTL8367C_PORT10_MISC_CFG_DOT1Q_REMARK_ENABLE_OFFSET 12 -#define RTL8367C_PORT10_MISC_CFG_DOT1Q_REMARK_ENABLE_MASK 0x1000 -#define RTL8367C_PORT10_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET 11 -#define RTL8367C_PORT10_MISC_CFG_INGRESSBW_FLOWCTRL_MASK 0x800 -#define RTL8367C_PORT10_MISC_CFG_INGRESSBW_IFG_OFFSET 10 -#define RTL8367C_PORT10_MISC_CFG_INGRESSBW_IFG_MASK 0x400 -#define RTL8367C_PORT10_MISC_CFG_RX_SPC_OFFSET 9 -#define RTL8367C_PORT10_MISC_CFG_RX_SPC_MASK 0x200 -#define RTL8367C_PORT10_MISC_CFG_CRC_SKIP_OFFSET 8 -#define RTL8367C_PORT10_MISC_CFG_CRC_SKIP_MASK 0x100 -#define RTL8367C_PORT10_MISC_CFG_PKTGEN_TX_FIRST_OFFSET 7 -#define RTL8367C_PORT10_MISC_CFG_PKTGEN_TX_FIRST_MASK 0x80 -#define RTL8367C_PORT10_MISC_CFG_MAC_LOOPBACK_OFFSET 6 -#define RTL8367C_PORT10_MISC_CFG_MAC_LOOPBACK_MASK 0x40 -#define RTL8367C_PORT10_MISC_CFG_VLAN_EGRESS_MODE_OFFSET 4 -#define RTL8367C_PORT10_MISC_CFG_VLAN_EGRESS_MODE_MASK 0x30 -#define RTL8367C_PORT10_MISC_CFG_CONGESTION_SUSTAIN_TIME_OFFSET 0 -#define RTL8367C_PORT10_MISC_CFG_CONGESTION_SUSTAIN_TIME_MASK 0xF - -#define RTL8367C_REG_INGRESSBW_PORT10_RATE_CTRL0 0x014f - -#define RTL8367C_REG_INGRESSBW_PORT10_RATE_CTRL1 0x0150 -#define RTL8367C_INGRESSBW_PORT10_RATE_CTRL1_DUMMY_OFFSET 3 -#define RTL8367C_INGRESSBW_PORT10_RATE_CTRL1_DUMMY_MASK 0xFFF8 -#define RTL8367C_INGRESSBW_PORT10_RATE_CTRL1_INGRESSBW_RATE16_OFFSET 0 -#define RTL8367C_INGRESSBW_PORT10_RATE_CTRL1_INGRESSBW_RATE16_MASK 0x7 - -#define RTL8367C_REG_PORT10_FORCE_RATE0 0x0151 - -#define RTL8367C_REG_PORT10_FORCE_RATE1 0x0152 - -#define RTL8367C_REG_PORT10_CURENT_RATE0 0x0153 - -#define RTL8367C_REG_PORT10_CURENT_RATE1 0x0154 - -#define RTL8367C_REG_PORT10_PAGE_COUNTER 0x0155 -#define RTL8367C_PORT10_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_PORT10_PAGE_COUNTER_MASK 0x7F - -#define RTL8367C_REG_PAGEMETER_PORT10_CTRL0 0x0156 - -#define RTL8367C_REG_PAGEMETER_PORT10_CTRL1 0x0157 - -#define RTL8367C_REG_PORT10_EEECFG 0x0158 -#define RTL8367C_PORT10_EEECFG_EEEP_ENABLE_TX_OFFSET 14 -#define RTL8367C_PORT10_EEECFG_EEEP_ENABLE_TX_MASK 0x4000 -#define RTL8367C_PORT10_EEECFG_EEEP_ENABLE_RX_OFFSET 13 -#define RTL8367C_PORT10_EEECFG_EEEP_ENABLE_RX_MASK 0x2000 -#define RTL8367C_PORT10_EEECFG_EEE_FORCE_OFFSET 12 -#define RTL8367C_PORT10_EEECFG_EEE_FORCE_MASK 0x1000 -#define RTL8367C_PORT10_EEECFG_EEE_100M_OFFSET 11 -#define RTL8367C_PORT10_EEECFG_EEE_100M_MASK 0x800 -#define RTL8367C_PORT10_EEECFG_EEE_GIGA_500M_OFFSET 10 -#define RTL8367C_PORT10_EEECFG_EEE_GIGA_500M_MASK 0x400 -#define RTL8367C_PORT10_EEECFG_EEE_TX_OFFSET 9 -#define RTL8367C_PORT10_EEECFG_EEE_TX_MASK 0x200 -#define RTL8367C_PORT10_EEECFG_EEE_RX_OFFSET 8 -#define RTL8367C_PORT10_EEECFG_EEE_RX_MASK 0x100 -#define RTL8367C_PORT10_EEECFG_EEE_DSP_RX_OFFSET 6 -#define RTL8367C_PORT10_EEECFG_EEE_DSP_RX_MASK 0x40 -#define RTL8367C_PORT10_EEECFG_EEE_LPI_OFFSET 5 -#define RTL8367C_PORT10_EEECFG_EEE_LPI_MASK 0x20 -#define RTL8367C_PORT10_EEECFG_EEE_TX_LPI_OFFSET 4 -#define RTL8367C_PORT10_EEECFG_EEE_TX_LPI_MASK 0x10 -#define RTL8367C_PORT10_EEECFG_EEE_RX_LPI_OFFSET 3 -#define RTL8367C_PORT10_EEECFG_EEE_RX_LPI_MASK 0x8 -#define RTL8367C_PORT10_EEECFG_EEE_PAUSE_INDICATOR_OFFSET 2 -#define RTL8367C_PORT10_EEECFG_EEE_PAUSE_INDICATOR_MASK 0x4 -#define RTL8367C_PORT10_EEECFG_EEE_WAKE_REQ_OFFSET 1 -#define RTL8367C_PORT10_EEECFG_EEE_WAKE_REQ_MASK 0x2 -#define RTL8367C_PORT10_EEECFG_EEE_SLEEP_REQ_OFFSET 0 -#define RTL8367C_PORT10_EEECFG_EEE_SLEEP_REQ_MASK 0x1 - -#define RTL8367C_REG_PORT10_EEETXMTR 0x0159 - -#define RTL8367C_REG_PORT10_EEERXMTR 0x015a - -#define RTL8367C_REG_PORT10_EEEPTXMTR 0x015b - -#define RTL8367C_REG_PORT10_EEEPRXMTR 0x015c - -#define RTL8367C_REG_PTP_PORT10_CFG1 0x015e -#define RTL8367C_PTP_PORT10_CFG1_OFFSET 7 -#define RTL8367C_PTP_PORT10_CFG1_MASK 0xFF - -#define RTL8367C_REG_P10_MSIC1 0x015f -#define RTL8367C_P10_MSIC1_OFFSET 0 -#define RTL8367C_P10_MSIC1_MASK 0x1 - -/* (16'h0200)outq_reg */ - -#define RTL8367C_REG_FLOWCTRL_QUEUE0_DROP_ON 0x0200 -#define RTL8367C_FLOWCTRL_QUEUE0_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE0_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE1_DROP_ON 0x0201 -#define RTL8367C_FLOWCTRL_QUEUE1_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE1_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE2_DROP_ON 0x0202 -#define RTL8367C_FLOWCTRL_QUEUE2_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE2_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE3_DROP_ON 0x0203 -#define RTL8367C_FLOWCTRL_QUEUE3_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE3_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE4_DROP_ON 0x0204 -#define RTL8367C_FLOWCTRL_QUEUE4_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE4_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE5_DROP_ON 0x0205 -#define RTL8367C_FLOWCTRL_QUEUE5_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE5_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE6_DROP_ON 0x0206 -#define RTL8367C_FLOWCTRL_QUEUE6_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE6_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE7_DROP_ON 0x0207 -#define RTL8367C_FLOWCTRL_QUEUE7_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE7_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT0_DROP_ON 0x0208 -#define RTL8367C_FLOWCTRL_PORT0_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT0_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT1_DROP_ON 0x0209 -#define RTL8367C_FLOWCTRL_PORT1_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT1_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT2_DROP_ON 0x020a -#define RTL8367C_FLOWCTRL_PORT2_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT2_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT3_DROP_ON 0x020b -#define RTL8367C_FLOWCTRL_PORT3_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT3_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT4_DROP_ON 0x020c -#define RTL8367C_FLOWCTRL_PORT4_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT4_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT5_DROP_ON 0x020d -#define RTL8367C_FLOWCTRL_PORT5_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT5_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT6_DROP_ON 0x020e -#define RTL8367C_FLOWCTRL_PORT6_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT6_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT7_DROP_ON 0x020f -#define RTL8367C_FLOWCTRL_PORT7_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT7_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT8_DROP_ON 0x0210 -#define RTL8367C_FLOWCTRL_PORT8_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT8_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT9_DROP_ON 0x0211 -#define RTL8367C_FLOWCTRL_PORT9_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT9_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT10_DROP_ON 0x0212 -#define RTL8367C_FLOWCTRL_PORT10_DROP_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT10_DROP_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_GAP 0x0218 -#define RTL8367C_FLOWCTRL_PORT_GAP_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_GAP_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE_GAP 0x0219 -#define RTL8367C_FLOWCTRL_QUEUE_GAP_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE_GAP_MASK 0x7FF - -#define RTL8367C_REG_PORT_QEMPTY 0x022d -#define RTL8367C_PORT_QEMPTY_OFFSET 0 -#define RTL8367C_PORT_QEMPTY_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_DEBUG_CTRL0 0x022e -#define RTL8367C_FLOWCTRL_DEBUG_CTRL0_OFFSET 0 -#define RTL8367C_FLOWCTRL_DEBUG_CTRL0_MASK 0xF - -#define RTL8367C_REG_FLOWCTRL_DEBUG_CTRL1 0x022f -#define RTL8367C_TOTAL_OFFSET 9 -#define RTL8367C_TOTAL_MASK 0x200 -#define RTL8367C_PORT_MAX_OFFSET 8 -#define RTL8367C_PORT_MAX_MASK 0x100 -#define RTL8367C_QMAX_MASK_OFFSET 0 -#define RTL8367C_QMAX_MASK_MASK 0xFF - -#define RTL8367C_REG_FLOWCTRL_QUEUE0_PAGE_COUNT 0x0230 -#define RTL8367C_FLOWCTRL_QUEUE0_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE0_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE1_PAGE_COUNT 0x0231 -#define RTL8367C_FLOWCTRL_QUEUE1_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE1_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE2_PAGE_COUNT 0x0232 -#define RTL8367C_FLOWCTRL_QUEUE2_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE2_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE3_PAGE_COUNT 0x0233 -#define RTL8367C_FLOWCTRL_QUEUE3_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE3_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE4_PAGE_COUNT 0x0234 -#define RTL8367C_FLOWCTRL_QUEUE4_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE4_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE5_PAGE_COUNT 0x0235 -#define RTL8367C_FLOWCTRL_QUEUE5_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE5_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE6_PAGE_COUNT 0x0236 -#define RTL8367C_FLOWCTRL_QUEUE6_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE6_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE7_PAGE_COUNT 0x0237 -#define RTL8367C_FLOWCTRL_QUEUE7_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE7_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_PAGE_COUNT 0x0238 -#define RTL8367C_FLOWCTRL_PORT_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE0_MAX_PAGE_COUNT 0x0239 -#define RTL8367C_FLOWCTRL_QUEUE0_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE0_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE1_MAX_PAGE_COUNT 0x023a -#define RTL8367C_FLOWCTRL_QUEUE1_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE1_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE2_MAX_PAGE_COUNT 0x023b -#define RTL8367C_FLOWCTRL_QUEUE2_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE2_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE3_MAX_PAGE_COUNT 0x023c -#define RTL8367C_FLOWCTRL_QUEUE3_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE3_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE4_MAX_PAGE_COUNT 0x023d -#define RTL8367C_FLOWCTRL_QUEUE4_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE4_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE5_MAX_PAGE_COUNT 0x023e -#define RTL8367C_FLOWCTRL_QUEUE5_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE5_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE6_MAX_PAGE_COUNT 0x023f -#define RTL8367C_FLOWCTRL_QUEUE6_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE6_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_QUEUE7_MAX_PAGE_COUNT 0x0240 -#define RTL8367C_FLOWCTRL_QUEUE7_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_QUEUE7_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_MAX_PAGE_COUNT 0x0241 -#define RTL8367C_FLOWCTRL_PORT_MAX_PAGE_COUNT_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_MAX_PAGE_COUNT_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_TOTAL_PACKET_COUNT 0x0243 - -#define RTL8367C_REG_HIGH_QUEUE_MASK0 0x0244 -#define RTL8367C_PORT1_HIGH_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT1_HIGH_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT0_HIGH_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT0_HIGH_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_HIGH_QUEUE_MASK1 0x0245 -#define RTL8367C_PORT3_HIGH_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT3_HIGH_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT2_HIGH_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT2_HIGH_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_HIGH_QUEUE_MASK2 0x0246 -#define RTL8367C_PORT5_HIGH_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT5_HIGH_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT4_HIGH_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT4_HIGH_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_HIGH_QUEUE_MASK3 0x0247 -#define RTL8367C_PORT7_HIGH_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT7_HIGH_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT6_HIGH_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT6_HIGH_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_HIGH_QUEUE_MASK4 0x0248 -#define RTL8367C_PORT9_HIGH_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT9_HIGH_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT8_HIGH_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT8_HIGH_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_HIGH_QUEUE_MASK5 0x0249 -#define RTL8367C_HIGH_QUEUE_MASK5_OFFSET 0 -#define RTL8367C_HIGH_QUEUE_MASK5_MASK 0xFF - -#define RTL8367C_REG_LOW_QUEUE_TH 0x024c -#define RTL8367C_LOW_QUEUE_TH_OFFSET 0 -#define RTL8367C_LOW_QUEUE_TH_MASK 0x7FF - -#define RTL8367C_REG_TH_TX_PREFET 0x0250 -#define RTL8367C_TH_TX_PREFET_OFFSET 0 -#define RTL8367C_TH_TX_PREFET_MASK 0xFF - -#define RTL8367C_REG_DUMMY_0251 0x0251 - -#define RTL8367C_REG_DUMMY_0252 0x0252 - -#define RTL8367C_REG_DUMMY_0253 0x0253 - -#define RTL8367C_REG_DUMMY_0254 0x0254 - -#define RTL8367C_REG_DUMMY_0255 0x0255 - -#define RTL8367C_REG_DUMMY_0256 0x0256 - -#define RTL8367C_REG_DUMMY_0257 0x0257 - -#define RTL8367C_REG_DUMMY_0258 0x0258 - -#define RTL8367C_REG_DUMMY_0259 0x0259 - -#define RTL8367C_REG_DUMMY_025A 0x025A - -#define RTL8367C_REG_DUMMY_025B 0x025B - -#define RTL8367C_REG_DUMMY_025C 0x025C - -#define RTL8367C_REG_Q_TXPKT_CNT_CTL 0x025d -#define RTL8367C_QUEUE_PKT_CNT_CLR_OFFSET 4 -#define RTL8367C_QUEUE_PKT_CNT_CLR_MASK 0x10 -#define RTL8367C_PORT_ID_QUEUE_PKT_CNT_OFFSET 0 -#define RTL8367C_PORT_ID_QUEUE_PKT_CNT_MASK 0xF - -#define RTL8367C_REG_Q0_TXPKT_CNT_L 0x025e - -#define RTL8367C_REG_Q0_TXPKT_CNT_H 0x025f - -#define RTL8367C_REG_Q1_TXPKT_CNT_L 0x0260 - -#define RTL8367C_REG_Q1_TXPKT_CNT_H 0x0261 - -#define RTL8367C_REG_Q2_TXPKT_CNT_L 0x0262 - -#define RTL8367C_REG_Q2_TXPKT_CNT_H 0x0263 - -#define RTL8367C_REG_Q3_TXPKT_CNT_L 0x0264 - -#define RTL8367C_REG_Q3_TXPKT_CNT_H 0x0265 - -#define RTL8367C_REG_Q4_TXPKT_CNT_L 0x0266 - -#define RTL8367C_REG_Q4_TXPKT_CNT_H 0x0267 - -#define RTL8367C_REG_Q5_TXPKT_CNT_L 0x0268 - -#define RTL8367C_REG_Q5_TXPKT_CNT_H 0x0269 - -#define RTL8367C_REG_Q6_TXPKT_CNT_L 0x026a - -#define RTL8367C_REG_Q6_TXPKT_CNT_H 0x026b - -#define RTL8367C_REG_Q7_TXPKT_CNT_L 0x026c - -#define RTL8367C_REG_Q7_TXPKT_CNT_H 0x026d - -/* (16'h0300)sch_reg */ - -#define RTL8367C_REG_SCHEDULE_WFQ_CTRL 0x0300 -#define RTL8367C_SCHEDULE_WFQ_CTRL_OFFSET 0 -#define RTL8367C_SCHEDULE_WFQ_CTRL_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_WFQ_BURST_SIZE 0x0301 - -#define RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL0 0x0302 -#define RTL8367C_PORT1_QUEUE7_TYPE_OFFSET 15 -#define RTL8367C_PORT1_QUEUE7_TYPE_MASK 0x8000 -#define RTL8367C_PORT1_QUEUE6_TYPE_OFFSET 14 -#define RTL8367C_PORT1_QUEUE6_TYPE_MASK 0x4000 -#define RTL8367C_PORT1_QUEUE5_TYPE_OFFSET 13 -#define RTL8367C_PORT1_QUEUE5_TYPE_MASK 0x2000 -#define RTL8367C_PORT1_QUEUE4_TYPE_OFFSET 12 -#define RTL8367C_PORT1_QUEUE4_TYPE_MASK 0x1000 -#define RTL8367C_PORT1_QUEUE3_TYPE_OFFSET 11 -#define RTL8367C_PORT1_QUEUE3_TYPE_MASK 0x800 -#define RTL8367C_PORT1_QUEUE2_TYPE_OFFSET 10 -#define RTL8367C_PORT1_QUEUE2_TYPE_MASK 0x400 -#define RTL8367C_PORT1_QUEUE1_TYPE_OFFSET 9 -#define RTL8367C_PORT1_QUEUE1_TYPE_MASK 0x200 -#define RTL8367C_PORT1_QUEUE0_TYPE_OFFSET 8 -#define RTL8367C_PORT1_QUEUE0_TYPE_MASK 0x100 -#define RTL8367C_PORT0_QUEUE7_TYPE_OFFSET 7 -#define RTL8367C_PORT0_QUEUE7_TYPE_MASK 0x80 -#define RTL8367C_PORT0_QUEUE6_TYPE_OFFSET 6 -#define RTL8367C_PORT0_QUEUE6_TYPE_MASK 0x40 -#define RTL8367C_PORT0_QUEUE5_TYPE_OFFSET 5 -#define RTL8367C_PORT0_QUEUE5_TYPE_MASK 0x20 -#define RTL8367C_PORT0_QUEUE4_TYPE_OFFSET 4 -#define RTL8367C_PORT0_QUEUE4_TYPE_MASK 0x10 -#define RTL8367C_PORT0_QUEUE3_TYPE_OFFSET 3 -#define RTL8367C_PORT0_QUEUE3_TYPE_MASK 0x8 -#define RTL8367C_PORT0_QUEUE2_TYPE_OFFSET 2 -#define RTL8367C_PORT0_QUEUE2_TYPE_MASK 0x4 -#define RTL8367C_PORT0_QUEUE1_TYPE_OFFSET 1 -#define RTL8367C_PORT0_QUEUE1_TYPE_MASK 0x2 -#define RTL8367C_PORT0_QUEUE0_TYPE_OFFSET 0 -#define RTL8367C_PORT0_QUEUE0_TYPE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL1 0x0303 -#define RTL8367C_PORT3_QUEUE7_TYPE_OFFSET 15 -#define RTL8367C_PORT3_QUEUE7_TYPE_MASK 0x8000 -#define RTL8367C_PORT3_QUEUE6_TYPE_OFFSET 14 -#define RTL8367C_PORT3_QUEUE6_TYPE_MASK 0x4000 -#define RTL8367C_PORT3_QUEUE5_TYPE_OFFSET 13 -#define RTL8367C_PORT3_QUEUE5_TYPE_MASK 0x2000 -#define RTL8367C_PORT3_QUEUE4_TYPE_OFFSET 12 -#define RTL8367C_PORT3_QUEUE4_TYPE_MASK 0x1000 -#define RTL8367C_PORT3_QUEUE3_TYPE_OFFSET 11 -#define RTL8367C_PORT3_QUEUE3_TYPE_MASK 0x800 -#define RTL8367C_PORT3_QUEUE2_TYPE_OFFSET 10 -#define RTL8367C_PORT3_QUEUE2_TYPE_MASK 0x400 -#define RTL8367C_PORT3_QUEUE1_TYPE_OFFSET 9 -#define RTL8367C_PORT3_QUEUE1_TYPE_MASK 0x200 -#define RTL8367C_PORT3_QUEUE0_TYPE_OFFSET 8 -#define RTL8367C_PORT3_QUEUE0_TYPE_MASK 0x100 -#define RTL8367C_PORT2_QUEUE7_TYPE_OFFSET 7 -#define RTL8367C_PORT2_QUEUE7_TYPE_MASK 0x80 -#define RTL8367C_PORT2_QUEUE6_TYPE_OFFSET 6 -#define RTL8367C_PORT2_QUEUE6_TYPE_MASK 0x40 -#define RTL8367C_PORT2_QUEUE5_TYPE_OFFSET 5 -#define RTL8367C_PORT2_QUEUE5_TYPE_MASK 0x20 -#define RTL8367C_PORT2_QUEUE4_TYPE_OFFSET 4 -#define RTL8367C_PORT2_QUEUE4_TYPE_MASK 0x10 -#define RTL8367C_PORT2_QUEUE3_TYPE_OFFSET 3 -#define RTL8367C_PORT2_QUEUE3_TYPE_MASK 0x8 -#define RTL8367C_PORT2_QUEUE2_TYPE_OFFSET 2 -#define RTL8367C_PORT2_QUEUE2_TYPE_MASK 0x4 -#define RTL8367C_PORT2_QUEUE1_TYPE_OFFSET 1 -#define RTL8367C_PORT2_QUEUE1_TYPE_MASK 0x2 -#define RTL8367C_PORT2_QUEUE0_TYPE_OFFSET 0 -#define RTL8367C_PORT2_QUEUE0_TYPE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL2 0x0304 -#define RTL8367C_PORT5_QUEUE7_TYPE_OFFSET 15 -#define RTL8367C_PORT5_QUEUE7_TYPE_MASK 0x8000 -#define RTL8367C_PORT5_QUEUE6_TYPE_OFFSET 14 -#define RTL8367C_PORT5_QUEUE6_TYPE_MASK 0x4000 -#define RTL8367C_PORT5_QUEUE5_TYPE_OFFSET 13 -#define RTL8367C_PORT5_QUEUE5_TYPE_MASK 0x2000 -#define RTL8367C_PORT5_QUEUE4_TYPE_OFFSET 12 -#define RTL8367C_PORT5_QUEUE4_TYPE_MASK 0x1000 -#define RTL8367C_PORT5_QUEUE3_TYPE_OFFSET 11 -#define RTL8367C_PORT5_QUEUE3_TYPE_MASK 0x800 -#define RTL8367C_PORT5_QUEUE2_TYPE_OFFSET 10 -#define RTL8367C_PORT5_QUEUE2_TYPE_MASK 0x400 -#define RTL8367C_PORT5_QUEUE1_TYPE_OFFSET 9 -#define RTL8367C_PORT5_QUEUE1_TYPE_MASK 0x200 -#define RTL8367C_PORT5_QUEUE0_TYPE_OFFSET 8 -#define RTL8367C_PORT5_QUEUE0_TYPE_MASK 0x100 -#define RTL8367C_PORT4_QUEUE7_TYPE_OFFSET 7 -#define RTL8367C_PORT4_QUEUE7_TYPE_MASK 0x80 -#define RTL8367C_PORT4_QUEUE6_TYPE_OFFSET 6 -#define RTL8367C_PORT4_QUEUE6_TYPE_MASK 0x40 -#define RTL8367C_PORT4_QUEUE5_TYPE_OFFSET 5 -#define RTL8367C_PORT4_QUEUE5_TYPE_MASK 0x20 -#define RTL8367C_PORT4_QUEUE4_TYPE_OFFSET 4 -#define RTL8367C_PORT4_QUEUE4_TYPE_MASK 0x10 -#define RTL8367C_PORT4_QUEUE3_TYPE_OFFSET 3 -#define RTL8367C_PORT4_QUEUE3_TYPE_MASK 0x8 -#define RTL8367C_PORT4_QUEUE2_TYPE_OFFSET 2 -#define RTL8367C_PORT4_QUEUE2_TYPE_MASK 0x4 -#define RTL8367C_PORT4_QUEUE1_TYPE_OFFSET 1 -#define RTL8367C_PORT4_QUEUE1_TYPE_MASK 0x2 -#define RTL8367C_PORT4_QUEUE0_TYPE_OFFSET 0 -#define RTL8367C_PORT4_QUEUE0_TYPE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL3 0x0305 -#define RTL8367C_PORT7_QUEUE7_TYPE_OFFSET 15 -#define RTL8367C_PORT7_QUEUE7_TYPE_MASK 0x8000 -#define RTL8367C_PORT7_QUEUE6_TYPE_OFFSET 14 -#define RTL8367C_PORT7_QUEUE6_TYPE_MASK 0x4000 -#define RTL8367C_PORT7_QUEUE5_TYPE_OFFSET 13 -#define RTL8367C_PORT7_QUEUE5_TYPE_MASK 0x2000 -#define RTL8367C_PORT7_QUEUE4_TYPE_OFFSET 12 -#define RTL8367C_PORT7_QUEUE4_TYPE_MASK 0x1000 -#define RTL8367C_PORT7_QUEUE3_TYPE_OFFSET 11 -#define RTL8367C_PORT7_QUEUE3_TYPE_MASK 0x800 -#define RTL8367C_PORT7_QUEUE2_TYPE_OFFSET 10 -#define RTL8367C_PORT7_QUEUE2_TYPE_MASK 0x400 -#define RTL8367C_PORT7_QUEUE1_TYPE_OFFSET 9 -#define RTL8367C_PORT7_QUEUE1_TYPE_MASK 0x200 -#define RTL8367C_PORT7_QUEUE0_TYPE_OFFSET 8 -#define RTL8367C_PORT7_QUEUE0_TYPE_MASK 0x100 -#define RTL8367C_PORT6_QUEUE7_TYPE_OFFSET 7 -#define RTL8367C_PORT6_QUEUE7_TYPE_MASK 0x80 -#define RTL8367C_PORT6_QUEUE6_TYPE_OFFSET 6 -#define RTL8367C_PORT6_QUEUE6_TYPE_MASK 0x40 -#define RTL8367C_PORT6_QUEUE5_TYPE_OFFSET 5 -#define RTL8367C_PORT6_QUEUE5_TYPE_MASK 0x20 -#define RTL8367C_PORT6_QUEUE4_TYPE_OFFSET 4 -#define RTL8367C_PORT6_QUEUE4_TYPE_MASK 0x10 -#define RTL8367C_PORT6_QUEUE3_TYPE_OFFSET 3 -#define RTL8367C_PORT6_QUEUE3_TYPE_MASK 0x8 -#define RTL8367C_PORT6_QUEUE2_TYPE_OFFSET 2 -#define RTL8367C_PORT6_QUEUE2_TYPE_MASK 0x4 -#define RTL8367C_PORT6_QUEUE1_TYPE_OFFSET 1 -#define RTL8367C_PORT6_QUEUE1_TYPE_MASK 0x2 -#define RTL8367C_SCHEDULE_QUEUE_TYPE_CTRL3_PORT6_QUEUE0_TYPE_OFFSET 0 -#define RTL8367C_SCHEDULE_QUEUE_TYPE_CTRL3_PORT6_QUEUE0_TYPE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL4 0x0306 -#define RTL8367C_PORT9_QUEUE7_TYPE_OFFSET 15 -#define RTL8367C_PORT9_QUEUE7_TYPE_MASK 0x8000 -#define RTL8367C_PORT9_QUEUE6_TYPE_OFFSET 14 -#define RTL8367C_PORT9_QUEUE6_TYPE_MASK 0x4000 -#define RTL8367C_PORT9_QUEUE5_TYPE_OFFSET 13 -#define RTL8367C_PORT9_QUEUE5_TYPE_MASK 0x2000 -#define RTL8367C_PORT9_QUEUE4_TYPE_OFFSET 12 -#define RTL8367C_PORT9_QUEUE4_TYPE_MASK 0x1000 -#define RTL8367C_PORT9_QUEUE3_TYPE_OFFSET 11 -#define RTL8367C_PORT9_QUEUE3_TYPE_MASK 0x800 -#define RTL8367C_PORT9_QUEUE2_TYPE_OFFSET 10 -#define RTL8367C_PORT9_QUEUE2_TYPE_MASK 0x400 -#define RTL8367C_PORT9_QUEUE1_TYPE_OFFSET 9 -#define RTL8367C_PORT9_QUEUE1_TYPE_MASK 0x200 -#define RTL8367C_PORT9_QUEUE0_TYPE_OFFSET 8 -#define RTL8367C_PORT9_QUEUE0_TYPE_MASK 0x100 -#define RTL8367C_PORT8_QUEUE7_TYPE_OFFSET 7 -#define RTL8367C_PORT8_QUEUE7_TYPE_MASK 0x80 -#define RTL8367C_PORT8_QUEUE6_TYPE_OFFSET 6 -#define RTL8367C_PORT8_QUEUE6_TYPE_MASK 0x40 -#define RTL8367C_PORT8_QUEUE5_TYPE_OFFSET 5 -#define RTL8367C_PORT8_QUEUE5_TYPE_MASK 0x20 -#define RTL8367C_PORT8_QUEUE4_TYPE_OFFSET 4 -#define RTL8367C_PORT8_QUEUE4_TYPE_MASK 0x10 -#define RTL8367C_PORT8_QUEUE3_TYPE_OFFSET 3 -#define RTL8367C_PORT8_QUEUE3_TYPE_MASK 0x8 -#define RTL8367C_PORT8_QUEUE2_TYPE_OFFSET 2 -#define RTL8367C_PORT8_QUEUE2_TYPE_MASK 0x4 -#define RTL8367C_PORT8_QUEUE1_TYPE_OFFSET 1 -#define RTL8367C_PORT8_QUEUE1_TYPE_MASK 0x2 -#define RTL8367C_SCHEDULE_QUEUE_TYPE_CTRL4_PORT6_QUEUE0_TYPE_OFFSET 0 -#define RTL8367C_SCHEDULE_QUEUE_TYPE_CTRL4_PORT6_QUEUE0_TYPE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_QUEUE_TYPE_CTRL5 0x0307 -#define RTL8367C_PORT10_QUEUE7_TYPE_OFFSET 7 -#define RTL8367C_PORT10_QUEUE7_TYPE_MASK 0x80 -#define RTL8367C_PORT10_QUEUE6_TYPE_OFFSET 6 -#define RTL8367C_PORT10_QUEUE6_TYPE_MASK 0x40 -#define RTL8367C_PORT10_QUEUE5_TYPE_OFFSET 5 -#define RTL8367C_PORT10_QUEUE5_TYPE_MASK 0x20 -#define RTL8367C_PORT10_QUEUE4_TYPE_OFFSET 4 -#define RTL8367C_PORT10_QUEUE4_TYPE_MASK 0x10 -#define RTL8367C_PORT10_QUEUE3_TYPE_OFFSET 3 -#define RTL8367C_PORT10_QUEUE3_TYPE_MASK 0x8 -#define RTL8367C_PORT10_QUEUE2_TYPE_OFFSET 2 -#define RTL8367C_PORT10_QUEUE2_TYPE_MASK 0x4 -#define RTL8367C_PORT10_QUEUE1_TYPE_OFFSET 1 -#define RTL8367C_PORT10_QUEUE1_TYPE_MASK 0x2 -#define RTL8367C_PORT10_QUEUE0_TYPE_OFFSET 0 -#define RTL8367C_PORT10_QUEUE0_TYPE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_APR_CTRL0 0x030a -#define RTL8367C_PORT10_APR_ENABLE_OFFSET 10 -#define RTL8367C_PORT10_APR_ENABLE_MASK 0x400 -#define RTL8367C_PORT9_APR_ENABLE_OFFSET 9 -#define RTL8367C_PORT9_APR_ENABLE_MASK 0x200 -#define RTL8367C_PORT8_APR_ENABLE_OFFSET 8 -#define RTL8367C_PORT8_APR_ENABLE_MASK 0x100 -#define RTL8367C_PORT7_APR_ENABLE_OFFSET 7 -#define RTL8367C_PORT7_APR_ENABLE_MASK 0x80 -#define RTL8367C_PORT6_APR_ENABLE_OFFSET 6 -#define RTL8367C_PORT6_APR_ENABLE_MASK 0x40 -#define RTL8367C_PORT5_APR_ENABLE_OFFSET 5 -#define RTL8367C_PORT5_APR_ENABLE_MASK 0x20 -#define RTL8367C_PORT4_APR_ENABLE_OFFSET 4 -#define RTL8367C_PORT4_APR_ENABLE_MASK 0x10 -#define RTL8367C_PORT3_APR_ENABLE_OFFSET 3 -#define RTL8367C_PORT3_APR_ENABLE_MASK 0x8 -#define RTL8367C_PORT2_APR_ENABLE_OFFSET 2 -#define RTL8367C_PORT2_APR_ENABLE_MASK 0x4 -#define RTL8367C_PORT1_APR_ENABLE_OFFSET 1 -#define RTL8367C_PORT1_APR_ENABLE_MASK 0x2 -#define RTL8367C_PORT0_APR_ENABLE_OFFSET 0 -#define RTL8367C_PORT0_APR_ENABLE_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE0_WFQ_WEIGHT 0x030c - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE1_WFQ_WEIGHT 0x030d -#define RTL8367C_SCHEDULE_PORT0_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE2_WFQ_WEIGHT 0x030e -#define RTL8367C_SCHEDULE_PORT0_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE3_WFQ_WEIGHT 0x030f -#define RTL8367C_SCHEDULE_PORT0_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE4_WFQ_WEIGHT 0x0310 -#define RTL8367C_SCHEDULE_PORT0_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE5_WFQ_WEIGHT 0x0311 -#define RTL8367C_SCHEDULE_PORT0_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE6_WFQ_WEIGHT 0x0312 -#define RTL8367C_SCHEDULE_PORT0_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT0_QUEUE7_WFQ_WEIGHT 0x0313 -#define RTL8367C_SCHEDULE_PORT0_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE0_WFQ_WEIGHT 0x0314 - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE1_WFQ_WEIGHT 0x0315 -#define RTL8367C_SCHEDULE_PORT1_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE2_WFQ_WEIGHT 0x0316 -#define RTL8367C_SCHEDULE_PORT1_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE3_WFQ_WEIGHT 0x0317 -#define RTL8367C_SCHEDULE_PORT1_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE4_WFQ_WEIGHT 0x0318 -#define RTL8367C_SCHEDULE_PORT1_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE5_WFQ_WEIGHT 0x0319 -#define RTL8367C_SCHEDULE_PORT1_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE6_WFQ_WEIGHT 0x031a -#define RTL8367C_SCHEDULE_PORT1_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT1_QUEUE7_WFQ_WEIGHT 0x031b -#define RTL8367C_SCHEDULE_PORT1_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE0_WFQ_WEIGHT 0x031c - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE1_WFQ_WEIGHT 0x031d -#define RTL8367C_SCHEDULE_PORT2_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE2_WFQ_WEIGHT 0x031e -#define RTL8367C_SCHEDULE_PORT2_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE3_WFQ_WEIGHT 0x031f -#define RTL8367C_SCHEDULE_PORT2_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE4_WFQ_WEIGHT 0x0320 -#define RTL8367C_SCHEDULE_PORT2_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE5_WFQ_WEIGHT 0x0321 -#define RTL8367C_SCHEDULE_PORT2_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE6_WFQ_WEIGHT 0x0322 -#define RTL8367C_SCHEDULE_PORT2_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT2_QUEUE7_WFQ_WEIGHT 0x0323 -#define RTL8367C_SCHEDULE_PORT2_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE0_WFQ_WEIGHT 0x0324 - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE1_WFQ_WEIGHT 0x0325 -#define RTL8367C_SCHEDULE_PORT3_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE2_WFQ_WEIGHT 0x0326 -#define RTL8367C_SCHEDULE_PORT3_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE3_WFQ_WEIGHT 0x0327 -#define RTL8367C_SCHEDULE_PORT3_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE4_WFQ_WEIGHT 0x0328 -#define RTL8367C_SCHEDULE_PORT3_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE5_WFQ_WEIGHT 0x0329 -#define RTL8367C_SCHEDULE_PORT3_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE6_WFQ_WEIGHT 0x032a -#define RTL8367C_SCHEDULE_PORT3_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT3_QUEUE7_WFQ_WEIGHT 0x032b -#define RTL8367C_SCHEDULE_PORT3_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE0_WFQ_WEIGHT 0x032c - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE1_WFQ_WEIGHT 0x032d -#define RTL8367C_SCHEDULE_PORT4_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE2_WFQ_WEIGHT 0x032e -#define RTL8367C_SCHEDULE_PORT4_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE3_WFQ_WEIGHT 0x032f -#define RTL8367C_SCHEDULE_PORT4_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE4_WFQ_WEIGHT 0x0330 -#define RTL8367C_SCHEDULE_PORT4_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE5_WFQ_WEIGHT 0x0331 -#define RTL8367C_SCHEDULE_PORT4_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE6_WFQ_WEIGHT 0x0332 -#define RTL8367C_SCHEDULE_PORT4_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT4_QUEUE7_WFQ_WEIGHT 0x0333 -#define RTL8367C_SCHEDULE_PORT4_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE0_WFQ_WEIGHT 0x0334 - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE1_WFQ_WEIGHT 0x0335 -#define RTL8367C_SCHEDULE_PORT5_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE2_WFQ_WEIGHT 0x0336 -#define RTL8367C_SCHEDULE_PORT5_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE3_WFQ_WEIGHT 0x0337 -#define RTL8367C_SCHEDULE_PORT5_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE4_WFQ_WEIGHT 0x0338 -#define RTL8367C_SCHEDULE_PORT5_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE5_WFQ_WEIGHT 0x0339 -#define RTL8367C_SCHEDULE_PORT5_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE6_WFQ_WEIGHT 0x033a -#define RTL8367C_SCHEDULE_PORT5_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT5_QUEUE7_WFQ_WEIGHT 0x033b -#define RTL8367C_SCHEDULE_PORT5_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE0_WFQ_WEIGHT 0x033c - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE1_WFQ_WEIGHT 0x033d -#define RTL8367C_SCHEDULE_PORT6_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE2_WFQ_WEIGHT 0x033e -#define RTL8367C_SCHEDULE_PORT6_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE3_WFQ_WEIGHT 0x033f -#define RTL8367C_SCHEDULE_PORT6_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE4_WFQ_WEIGHT 0x0340 -#define RTL8367C_SCHEDULE_PORT6_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE5_WFQ_WEIGHT 0x0341 -#define RTL8367C_SCHEDULE_PORT6_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE6_WFQ_WEIGHT 0x0342 -#define RTL8367C_SCHEDULE_PORT6_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT6_QUEUE7_WFQ_WEIGHT 0x0343 -#define RTL8367C_SCHEDULE_PORT6_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE0_WFQ_WEIGHT 0x0344 - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE1_WFQ_WEIGHT 0x0345 -#define RTL8367C_SCHEDULE_PORT7_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE2_WFQ_WEIGHT 0x0346 -#define RTL8367C_SCHEDULE_PORT7_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE3_WFQ_WEIGHT 0x0347 -#define RTL8367C_SCHEDULE_PORT7_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE4_WFQ_WEIGHT 0x0348 -#define RTL8367C_SCHEDULE_PORT7_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE5_WFQ_WEIGHT 0x0349 -#define RTL8367C_SCHEDULE_PORT7_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE6_WFQ_WEIGHT 0x034a -#define RTL8367C_SCHEDULE_PORT7_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT7_QUEUE7_WFQ_WEIGHT 0x034b -#define RTL8367C_SCHEDULE_PORT7_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE0_WFQ_WEIGHT 0x034c - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE1_WFQ_WEIGHT 0x034d -#define RTL8367C_SCHEDULE_PORT8_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE2_WFQ_WEIGHT 0x034e -#define RTL8367C_SCHEDULE_PORT8_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE3_WFQ_WEIGHT 0x034f -#define RTL8367C_SCHEDULE_PORT8_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE4_WFQ_WEIGHT 0x0350 -#define RTL8367C_SCHEDULE_PORT8_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE5_WFQ_WEIGHT 0x0351 -#define RTL8367C_SCHEDULE_PORT8_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE6_WFQ_WEIGHT 0x0352 -#define RTL8367C_SCHEDULE_PORT8_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT8_QUEUE7_WFQ_WEIGHT 0x0353 -#define RTL8367C_SCHEDULE_PORT8_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE0_WFQ_WEIGHT 0x0354 - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE1_WFQ_WEIGHT 0x0355 -#define RTL8367C_SCHEDULE_PORT9_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE2_WFQ_WEIGHT 0x0356 -#define RTL8367C_SCHEDULE_PORT9_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE3_WFQ_WEIGHT 0x0357 -#define RTL8367C_SCHEDULE_PORT9_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE4_WFQ_WEIGHT 0x0358 -#define RTL8367C_SCHEDULE_PORT9_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE5_WFQ_WEIGHT 0x0359 -#define RTL8367C_SCHEDULE_PORT9_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE6_WFQ_WEIGHT 0x035a -#define RTL8367C_SCHEDULE_PORT9_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT9_QUEUE7_WFQ_WEIGHT 0x035b -#define RTL8367C_SCHEDULE_PORT9_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE0_WFQ_WEIGHT 0x035c - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE1_WFQ_WEIGHT 0x035d -#define RTL8367C_SCHEDULE_PORT10_QUEUE1_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE1_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE2_WFQ_WEIGHT 0x035e -#define RTL8367C_SCHEDULE_PORT10_QUEUE2_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE2_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE3_WFQ_WEIGHT 0x035f -#define RTL8367C_SCHEDULE_PORT10_QUEUE3_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE3_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE4_WFQ_WEIGHT 0x0360 -#define RTL8367C_SCHEDULE_PORT10_QUEUE4_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE4_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE5_WFQ_WEIGHT 0x0361 -#define RTL8367C_SCHEDULE_PORT10_QUEUE5_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE5_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE6_WFQ_WEIGHT 0x0362 -#define RTL8367C_SCHEDULE_PORT10_QUEUE6_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE6_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_SCHEDULE_PORT10_QUEUE7_WFQ_WEIGHT 0x0363 -#define RTL8367C_SCHEDULE_PORT10_QUEUE7_WFQ_WEIGHT_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_QUEUE7_WFQ_WEIGHT_MASK 0x7F - -#define RTL8367C_REG_PORT0_EGRESSBW_CTRL0 0x038c - -#define RTL8367C_REG_PORT0_EGRESSBW_CTRL1 0x038d -#define RTL8367C_PORT0_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT0_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT1_EGRESSBW_CTRL0 0x038e - -#define RTL8367C_REG_PORT1_EGRESSBW_CTRL1 0x038f -#define RTL8367C_PORT1_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT1_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT2_EGRESSBW_CTRL0 0x0390 - -#define RTL8367C_REG_PORT2_EGRESSBW_CTRL1 0x0391 -#define RTL8367C_PORT2_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT2_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT3_EGRESSBW_CTRL0 0x0392 - -#define RTL8367C_REG_PORT3_EGRESSBW_CTRL1 0x0393 -#define RTL8367C_PORT3_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT3_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT4_EGRESSBW_CTRL0 0x0394 - -#define RTL8367C_REG_PORT4_EGRESSBW_CTRL1 0x0395 -#define RTL8367C_PORT4_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT4_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT5_EGRESSBW_CTRL0 0x0396 - -#define RTL8367C_REG_PORT5_EGRESSBW_CTRL1 0x0397 -#define RTL8367C_PORT5_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT5_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT6_EGRESSBW_CTRL0 0x0398 - -#define RTL8367C_REG_PORT6_EGRESSBW_CTRL1 0x0399 -#define RTL8367C_PORT6_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT6_EGRESSBW_CTRL1_MASK 0x7 - -#define RTL8367C_REG_PORT7_EGRESSBW_CTRL0 0x039a - -#define RTL8367C_REG_PORT7_EGRESSBW_CTRL1 0x039b -#define RTL8367C_PORT7_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT7_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT8_EGRESSBW_CTRL0 0x039c - -#define RTL8367C_REG_PORT8_EGRESSBW_CTRL1 0x039d -#define RTL8367C_PORT8_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT8_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_PORT9_EGRESSBW_CTRL0 0x039e - -#define RTL8367C_REG_PORT9_EGRESSBW_CTRL1 0x039f -#define RTL8367C_PORT9_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT9_EGRESSBW_CTRL1_MASK 0x7 - -#define RTL8367C_REG_PORT10_EGRESSBW_CTRL0 0x03a0 - -#define RTL8367C_REG_PORT10_EGRESSBW_CTRL1 0x03a1 -#define RTL8367C_PORT10_EGRESSBW_CTRL1_OFFSET 0 -#define RTL8367C_PORT10_EGRESSBW_CTRL1_MASK 0x1 - -#define RTL8367C_REG_SCHEDULE_PORT0_APR_METER_CTRL0 0x03ac -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT0_APR_METER_CTRL1 0x03ad -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT0_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT1_APR_METER_CTRL0 0x03b0 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT1_APR_METER_CTRL1 0x03b1 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT1_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT2_APR_METER_CTRL0 0x03b4 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT2_APR_METER_CTRL1 0x03b5 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT2_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT3_APR_METER_CTRL0 0x03b8 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT3_APR_METER_CTRL1 0x03b9 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT3_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT4_APR_METER_CTRL0 0x03bc -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT4_APR_METER_CTRL1 0x03bd -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT4_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT5_APR_METER_CTRL0 0x03c0 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT5_APR_METER_CTRL1 0x03c1 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT5_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT6_APR_METER_CTRL0 0x03c4 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT6_APR_METER_CTRL1 0x03c5 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT6_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT7_APR_METER_CTRL0 0x03c8 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT7_APR_METER_CTRL1 0x03c9 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT7_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT8_APR_METER_CTRL0 0x03ca -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT8_APR_METER_CTRL1 0x03cb -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT8_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT9_APR_METER_CTRL0 0x03cc -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT9_APR_METER_CTRL1 0x03cd -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT9_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT10_APR_METER_CTRL0 0x03ce -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE4_APR_METER_OFFSET 12 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE4_APR_METER_MASK 0x7000 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE3_APR_METER_OFFSET 9 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE3_APR_METER_MASK 0xE00 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE2_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE2_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE1_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE1_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE0_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL0_QUEUE0_APR_METER_MASK 0x7 - -#define RTL8367C_REG_SCHEDULE_PORT10_APR_METER_CTRL1 0x03cf -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL1_QUEUE7_APR_METER_OFFSET 6 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL1_QUEUE7_APR_METER_MASK 0x1C0 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL1_QUEUE6_APR_METER_OFFSET 3 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL1_QUEUE6_APR_METER_MASK 0x38 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL1_QUEUE5_APR_METER_OFFSET 0 -#define RTL8367C_SCHEDULE_PORT10_APR_METER_CTRL1_QUEUE5_APR_METER_MASK 0x7 - -#define RTL8367C_REG_LINE_RATE_1G_L 0x03ec - -#define RTL8367C_REG_LINE_RATE_1G_H 0x03ed -#define RTL8367C_LINE_RATE_1G_H_OFFSET 0 -#define RTL8367C_LINE_RATE_1G_H_MASK 0x1 - -#define RTL8367C_REG_LINE_RATE_100_L 0x03ee - -#define RTL8367C_REG_LINE_RATE_100_H 0x03ef -#define RTL8367C_LINE_RATE_100_H_OFFSET 0 -#define RTL8367C_LINE_RATE_100_H_MASK 0x1 - -#define RTL8367C_REG_LINE_RATE_10_L 0x03f0 - -#define RTL8367C_REG_LINE_RATE_10_H 0x03f1 -#define RTL8367C_LINE_RATE_10_H_OFFSET 0 -#define RTL8367C_LINE_RATE_10_H_MASK 0x1 - -#define RTL8367C_REG_DUMMY_03f2 0x03f2 - -#define RTL8367C_REG_DUMMY_03f3 0x03f3 - -#define RTL8367C_REG_DUMMY_03f4 0x03f4 - -#define RTL8367C_REG_DUMMY_03f5 0x03f5 - -#define RTL8367C_REG_DUMMY_03f6 0x03f6 - -#define RTL8367C_REG_BYPASS_LINE_RATE 0x03f7 -#define RTL8367C_BYPASS_PORT10_CONSTRAINT_OFFSET 5 -#define RTL8367C_BYPASS_PORT10_CONSTRAINT_MASK 0x20 -#define RTL8367C_BYPASS_PORT9_CONSTRAINT_OFFSET 4 -#define RTL8367C_BYPASS_PORT9_CONSTRAINT_MASK 0x10 -#define RTL8367C_BYPASS_PORT8_CONSTRAINT_OFFSET 3 -#define RTL8367C_BYPASS_PORT8_CONSTRAINT_MASK 0x8 -#define RTL8367C_BYPASS_PORT7_CONSTRAINT_OFFSET 2 -#define RTL8367C_BYPASS_PORT7_CONSTRAINT_MASK 0x4 -#define RTL8367C_BYPASS_PORT6_CONSTRAINT_OFFSET 1 -#define RTL8367C_BYPASS_PORT6_CONSTRAINT_MASK 0x2 -#define RTL8367C_BYPASS_PORT5_CONSTRAINT_OFFSET 0 -#define RTL8367C_BYPASS_PORT5_CONSTRAINT_MASK 0x1 - -#define RTL8367C_REG_LINE_RATE_500_H 0x03f8 -#define RTL8367C_LINE_RATE_500_H_OFFSET 0 -#define RTL8367C_LINE_RATE_500_H_MASK 0x7 - -#define RTL8367C_REG_LINE_RATE_500_L 0x03f9 - -#define RTL8367C_REG_LINE_RATE_HSG_H 0x03fa -#define RTL8367C_LINE_RATE_HSG_H_OFFSET 0 -#define RTL8367C_LINE_RATE_HSG_H_MASK 0x7 - -#define RTL8367C_REG_LINE_RATE_HSG_L 0x03fb - -/* (16'h0500)table_reg */ - -#define RTL8367C_REG_TABLE_ACCESS_CTRL 0x0500 -#define RTL8367C_TABLE_ACCESS_CTRL_SPA_OFFSET 8 -#define RTL8367C_TABLE_ACCESS_CTRL_SPA_MASK 0xF00 -#define RTL8367C_ACCESS_METHOD_OFFSET 4 -#define RTL8367C_ACCESS_METHOD_MASK 0x70 -#define RTL8367C_COMMAND_TYPE_OFFSET 3 -#define RTL8367C_COMMAND_TYPE_MASK 0x8 -#define RTL8367C_TABLE_TYPE_OFFSET 0 -#define RTL8367C_TABLE_TYPE_MASK 0x7 - -#define RTL8367C_REG_TABLE_ACCESS_ADDR 0x0501 -#define RTL8367C_TABLE_ACCESS_ADDR_OFFSET 0 -#define RTL8367C_TABLE_ACCESS_ADDR_MASK 0x1FFF - -#define RTL8367C_REG_TABLE_LUT_ADDR 0x0502 -#define RTL8367C_ADDRESS2_OFFSET 14 -#define RTL8367C_ADDRESS2_MASK 0x4000 -#define RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET 13 -#define RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_MASK 0x2000 -#define RTL8367C_HIT_STATUS_OFFSET 12 -#define RTL8367C_HIT_STATUS_MASK 0x1000 -#define RTL8367C_TABLE_LUT_ADDR_TYPE_OFFSET 11 -#define RTL8367C_TABLE_LUT_ADDR_TYPE_MASK 0x800 -#define RTL8367C_TABLE_LUT_ADDR_ADDRESS_OFFSET 0 -#define RTL8367C_TABLE_LUT_ADDR_ADDRESS_MASK 0x7FF - -#define RTL8367C_REG_HSA_HSB_LATCH 0x0503 -#define RTL8367C_LATCH_ALWAYS_OFFSET 15 -#define RTL8367C_LATCH_ALWAYS_MASK 0x8000 -#define RTL8367C_LATCH_FIRST_OFFSET 14 -#define RTL8367C_LATCH_FIRST_MASK 0x4000 -#define RTL8367C_SPA_EN_OFFSET 13 -#define RTL8367C_SPA_EN_MASK 0x2000 -#define RTL8367C_FORWARD_EN_OFFSET 12 -#define RTL8367C_FORWARD_EN_MASK 0x1000 -#define RTL8367C_REASON_EN_OFFSET 11 -#define RTL8367C_REASON_EN_MASK 0x800 -#define RTL8367C_HSA_HSB_LATCH_SPA_OFFSET 8 -#define RTL8367C_HSA_HSB_LATCH_SPA_MASK 0x700 -#define RTL8367C_FORWARD_OFFSET 6 -#define RTL8367C_FORWARD_MASK 0xC0 -#define RTL8367C_REASON_OFFSET 0 -#define RTL8367C_REASON_MASK 0x3F - -#define RTL8367C_REG_HSA_HSB_LATCH2 0x0504 -#define RTL8367C_HSA_HSB_LATCH2_Reserved_OFFSET 1 -#define RTL8367C_HSA_HSB_LATCH2_Reserved_MASK 0xFFFE -#define RTL8367C_SPA2_OFFSET 0 -#define RTL8367C_SPA2_MASK 0x1 - -#define RTL8367C_REG_TABLE_WRITE_DATA0 0x0510 - -#define RTL8367C_REG_TABLE_WRITE_DATA1 0x0511 - -#define RTL8367C_REG_TABLE_WRITE_DATA2 0x0512 - -#define RTL8367C_REG_TABLE_WRITE_DATA3 0x0513 - -#define RTL8367C_REG_TABLE_WRITE_DATA4 0x0514 - -#define RTL8367C_REG_TABLE_WRITE_DATA5 0x0515 - -#define RTL8367C_REG_TABLE_WRITE_DATA6 0x0516 - -#define RTL8367C_REG_TABLE_WRITE_DATA7 0x0517 - -#define RTL8367C_REG_TABLE_WRITE_DATA8 0x0518 - -#define RTL8367C_REG_TABLE_WRITE_DATA9 0x0519 -#define RTL8367C_TABLE_WRITE_DATA9_OFFSET 0 -#define RTL8367C_TABLE_WRITE_DATA9_MASK 0xF - -#define RTL8367C_REG_TABLE_READ_DATA0 0x0520 - -#define RTL8367C_REG_TABLE_READ_DATA1 0x0521 - -#define RTL8367C_REG_TABLE_READ_DATA2 0x0522 - -#define RTL8367C_REG_TABLE_READ_DATA3 0x0523 - -#define RTL8367C_REG_TABLE_READ_DATA4 0x0524 - -#define RTL8367C_REG_TABLE_READ_DATA5 0x0525 - -#define RTL8367C_REG_TABLE_READ_DATA6 0x0526 - -#define RTL8367C_REG_TABLE_READ_DATA7 0x0527 - -#define RTL8367C_REG_TABLE_READ_DATA8 0x0528 - -#define RTL8367C_REG_TABLE_READ_DATA9 0x0529 -#define RTL8367C_TABLE_READ_DATA9_OFFSET 0 -#define RTL8367C_TABLE_READ_DATA9_MASK 0xF - -#define RTL8367C_REG_TBL_DUMMY00 0x0550 - -#define RTL8367C_REG_TBL_DUMMY01 0x0551 - -/* (16'h0600)acl_reg */ - -#define RTL8367C_REG_ACL_RULE_TEMPLATE0_CTRL0 0x0600 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL0_FIELD1_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL0_FIELD1_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL0_FIELD0_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL0_FIELD0_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE0_CTRL1 0x0601 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL1_FIELD3_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL1_FIELD3_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL1_FIELD2_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL1_FIELD2_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE0_CTRL2 0x0602 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL2_FIELD5_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL2_FIELD5_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL2_FIELD4_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL2_FIELD4_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE0_CTRL3 0x0603 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL3_FIELD7_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL3_FIELD7_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL3_FIELD6_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE0_CTRL3_FIELD6_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE1_CTRL0 0x0604 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL0_FIELD1_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL0_FIELD1_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL0_FIELD0_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL0_FIELD0_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE1_CTRL1 0x0605 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL1_FIELD3_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL1_FIELD3_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL1_FIELD2_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL1_FIELD2_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE1_CTRL2 0x0606 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL2_FIELD5_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL2_FIELD5_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL2_FIELD4_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL2_FIELD4_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE1_CTRL3 0x0607 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL3_FIELD7_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL3_FIELD7_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL3_FIELD6_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE1_CTRL3_FIELD6_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE2_CTRL0 0x0608 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL0_FIELD1_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL0_FIELD1_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL0_FIELD0_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL0_FIELD0_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE2_CTRL1 0x0609 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL1_FIELD3_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL1_FIELD3_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL1_FIELD2_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL1_FIELD2_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE2_CTRL2 0x060a -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL2_FIELD5_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL2_FIELD5_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL2_FIELD4_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL2_FIELD4_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE2_CTRL3 0x060b -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL3_FIELD7_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL3_FIELD7_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL3_FIELD6_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE2_CTRL3_FIELD6_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE3_CTRL0 0x060c -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL0_FIELD1_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL0_FIELD1_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL0_FIELD0_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL0_FIELD0_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE3_CTRL1 0x060d -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL1_FIELD3_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL1_FIELD3_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL1_FIELD2_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL1_FIELD2_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE3_CTRL2 0x060e -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL2_FIELD5_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL2_FIELD5_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL2_FIELD4_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL2_FIELD4_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE3_CTRL3 0x060f -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL3_FIELD7_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL3_FIELD7_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL3_FIELD6_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE3_CTRL3_FIELD6_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE4_CTRL0 0x0610 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL0_FIELD1_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL0_FIELD1_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL0_FIELD0_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL0_FIELD0_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE4_CTRL1 0x0611 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL1_FIELD3_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL1_FIELD3_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL1_FIELD2_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL1_FIELD2_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE4_CTRL2 0x0612 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL2_FIELD5_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL2_FIELD5_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL2_FIELD4_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL2_FIELD4_MASK 0x7F - -#define RTL8367C_REG_ACL_RULE_TEMPLATE4_CTRL3 0x0613 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL3_FIELD7_OFFSET 8 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL3_FIELD7_MASK 0x7F00 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL3_FIELD6_OFFSET 0 -#define RTL8367C_ACL_RULE_TEMPLATE4_CTRL3_FIELD6_MASK 0x7F - -#define RTL8367C_REG_ACL_ACTION_CTRL0 0x0614 -#define RTL8367C_OP1_NOT_OFFSET 14 -#define RTL8367C_OP1_NOT_MASK 0x4000 -#define RTL8367C_ACT1_GPIO_OFFSET 13 -#define RTL8367C_ACT1_GPIO_MASK 0x2000 -#define RTL8367C_ACT1_FORWARD_OFFSET 12 -#define RTL8367C_ACT1_FORWARD_MASK 0x1000 -#define RTL8367C_ACT1_POLICING_OFFSET 11 -#define RTL8367C_ACT1_POLICING_MASK 0x800 -#define RTL8367C_ACT1_PRIORITY_OFFSET 10 -#define RTL8367C_ACT1_PRIORITY_MASK 0x400 -#define RTL8367C_ACT1_SVID_OFFSET 9 -#define RTL8367C_ACT1_SVID_MASK 0x200 -#define RTL8367C_ACT1_CVID_OFFSET 8 -#define RTL8367C_ACT1_CVID_MASK 0x100 -#define RTL8367C_OP0_NOT_OFFSET 6 -#define RTL8367C_OP0_NOT_MASK 0x40 -#define RTL8367C_ACT0_GPIO_OFFSET 5 -#define RTL8367C_ACT0_GPIO_MASK 0x20 -#define RTL8367C_ACT0_FORWARD_OFFSET 4 -#define RTL8367C_ACT0_FORWARD_MASK 0x10 -#define RTL8367C_ACT0_POLICING_OFFSET 3 -#define RTL8367C_ACT0_POLICING_MASK 0x8 -#define RTL8367C_ACT0_PRIORITY_OFFSET 2 -#define RTL8367C_ACT0_PRIORITY_MASK 0x4 -#define RTL8367C_ACT0_SVID_OFFSET 1 -#define RTL8367C_ACT0_SVID_MASK 0x2 -#define RTL8367C_ACT0_CVID_OFFSET 0 -#define RTL8367C_ACT0_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL1 0x0615 -#define RTL8367C_OP3_NOT_OFFSET 14 -#define RTL8367C_OP3_NOT_MASK 0x4000 -#define RTL8367C_ACT3_GPIO_OFFSET 13 -#define RTL8367C_ACT3_GPIO_MASK 0x2000 -#define RTL8367C_ACT3_FORWARD_OFFSET 12 -#define RTL8367C_ACT3_FORWARD_MASK 0x1000 -#define RTL8367C_ACT3_POLICING_OFFSET 11 -#define RTL8367C_ACT3_POLICING_MASK 0x800 -#define RTL8367C_ACT3_PRIORITY_OFFSET 10 -#define RTL8367C_ACT3_PRIORITY_MASK 0x400 -#define RTL8367C_ACT3_SVID_OFFSET 9 -#define RTL8367C_ACT3_SVID_MASK 0x200 -#define RTL8367C_ACT3_CVID_OFFSET 8 -#define RTL8367C_ACT3_CVID_MASK 0x100 -#define RTL8367C_OP2_NOT_OFFSET 6 -#define RTL8367C_OP2_NOT_MASK 0x40 -#define RTL8367C_ACT2_GPIO_OFFSET 5 -#define RTL8367C_ACT2_GPIO_MASK 0x20 -#define RTL8367C_ACT2_FORWARD_OFFSET 4 -#define RTL8367C_ACT2_FORWARD_MASK 0x10 -#define RTL8367C_ACT2_POLICING_OFFSET 3 -#define RTL8367C_ACT2_POLICING_MASK 0x8 -#define RTL8367C_ACT2_PRIORITY_OFFSET 2 -#define RTL8367C_ACT2_PRIORITY_MASK 0x4 -#define RTL8367C_ACT2_SVID_OFFSET 1 -#define RTL8367C_ACT2_SVID_MASK 0x2 -#define RTL8367C_ACT2_CVID_OFFSET 0 -#define RTL8367C_ACT2_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL2 0x0616 -#define RTL8367C_OP5_NOT_OFFSET 14 -#define RTL8367C_OP5_NOT_MASK 0x4000 -#define RTL8367C_ACT5_GPIO_OFFSET 13 -#define RTL8367C_ACT5_GPIO_MASK 0x2000 -#define RTL8367C_ACT5_FORWARD_OFFSET 12 -#define RTL8367C_ACT5_FORWARD_MASK 0x1000 -#define RTL8367C_ACT5_POLICING_OFFSET 11 -#define RTL8367C_ACT5_POLICING_MASK 0x800 -#define RTL8367C_ACT5_PRIORITY_OFFSET 10 -#define RTL8367C_ACT5_PRIORITY_MASK 0x400 -#define RTL8367C_ACT5_SVID_OFFSET 9 -#define RTL8367C_ACT5_SVID_MASK 0x200 -#define RTL8367C_ACT5_CVID_OFFSET 8 -#define RTL8367C_ACT5_CVID_MASK 0x100 -#define RTL8367C_OP4_NOT_OFFSET 6 -#define RTL8367C_OP4_NOT_MASK 0x40 -#define RTL8367C_ACT4_GPIO_OFFSET 5 -#define RTL8367C_ACT4_GPIO_MASK 0x20 -#define RTL8367C_ACT4_FORWARD_OFFSET 4 -#define RTL8367C_ACT4_FORWARD_MASK 0x10 -#define RTL8367C_ACT4_POLICING_OFFSET 3 -#define RTL8367C_ACT4_POLICING_MASK 0x8 -#define RTL8367C_ACT4_PRIORITY_OFFSET 2 -#define RTL8367C_ACT4_PRIORITY_MASK 0x4 -#define RTL8367C_ACT4_SVID_OFFSET 1 -#define RTL8367C_ACT4_SVID_MASK 0x2 -#define RTL8367C_ACT4_CVID_OFFSET 0 -#define RTL8367C_ACT4_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL3 0x0617 -#define RTL8367C_OP7_NOT_OFFSET 14 -#define RTL8367C_OP7_NOT_MASK 0x4000 -#define RTL8367C_ACT7_GPIO_OFFSET 13 -#define RTL8367C_ACT7_GPIO_MASK 0x2000 -#define RTL8367C_ACT7_FORWARD_OFFSET 12 -#define RTL8367C_ACT7_FORWARD_MASK 0x1000 -#define RTL8367C_ACT7_POLICING_OFFSET 11 -#define RTL8367C_ACT7_POLICING_MASK 0x800 -#define RTL8367C_ACT7_PRIORITY_OFFSET 10 -#define RTL8367C_ACT7_PRIORITY_MASK 0x400 -#define RTL8367C_ACT7_SVID_OFFSET 9 -#define RTL8367C_ACT7_SVID_MASK 0x200 -#define RTL8367C_ACT7_CVID_OFFSET 8 -#define RTL8367C_ACT7_CVID_MASK 0x100 -#define RTL8367C_OP6_NOT_OFFSET 6 -#define RTL8367C_OP6_NOT_MASK 0x40 -#define RTL8367C_ACT6_GPIO_OFFSET 5 -#define RTL8367C_ACT6_GPIO_MASK 0x20 -#define RTL8367C_ACT6_FORWARD_OFFSET 4 -#define RTL8367C_ACT6_FORWARD_MASK 0x10 -#define RTL8367C_ACT6_POLICING_OFFSET 3 -#define RTL8367C_ACT6_POLICING_MASK 0x8 -#define RTL8367C_ACT6_PRIORITY_OFFSET 2 -#define RTL8367C_ACT6_PRIORITY_MASK 0x4 -#define RTL8367C_ACT6_SVID_OFFSET 1 -#define RTL8367C_ACT6_SVID_MASK 0x2 -#define RTL8367C_ACT6_CVID_OFFSET 0 -#define RTL8367C_ACT6_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL4 0x0618 -#define RTL8367C_OP9_NOT_OFFSET 14 -#define RTL8367C_OP9_NOT_MASK 0x4000 -#define RTL8367C_ACT9_GPIO_OFFSET 13 -#define RTL8367C_ACT9_GPIO_MASK 0x2000 -#define RTL8367C_ACT9_FORWARD_OFFSET 12 -#define RTL8367C_ACT9_FORWARD_MASK 0x1000 -#define RTL8367C_ACT9_POLICING_OFFSET 11 -#define RTL8367C_ACT9_POLICING_MASK 0x800 -#define RTL8367C_ACT9_PRIORITY_OFFSET 10 -#define RTL8367C_ACT9_PRIORITY_MASK 0x400 -#define RTL8367C_ACT9_SVID_OFFSET 9 -#define RTL8367C_ACT9_SVID_MASK 0x200 -#define RTL8367C_ACT9_CVID_OFFSET 8 -#define RTL8367C_ACT9_CVID_MASK 0x100 -#define RTL8367C_OP8_NOT_OFFSET 6 -#define RTL8367C_OP8_NOT_MASK 0x40 -#define RTL8367C_ACT8_GPIO_OFFSET 5 -#define RTL8367C_ACT8_GPIO_MASK 0x20 -#define RTL8367C_ACT8_FORWARD_OFFSET 4 -#define RTL8367C_ACT8_FORWARD_MASK 0x10 -#define RTL8367C_ACT8_POLICING_OFFSET 3 -#define RTL8367C_ACT8_POLICING_MASK 0x8 -#define RTL8367C_ACT8_PRIORITY_OFFSET 2 -#define RTL8367C_ACT8_PRIORITY_MASK 0x4 -#define RTL8367C_ACT8_SVID_OFFSET 1 -#define RTL8367C_ACT8_SVID_MASK 0x2 -#define RTL8367C_ACT8_CVID_OFFSET 0 -#define RTL8367C_ACT8_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL5 0x0619 -#define RTL8367C_OP11_NOT_OFFSET 14 -#define RTL8367C_OP11_NOT_MASK 0x4000 -#define RTL8367C_ACT11_GPIO_OFFSET 13 -#define RTL8367C_ACT11_GPIO_MASK 0x2000 -#define RTL8367C_ACT11_FORWARD_OFFSET 12 -#define RTL8367C_ACT11_FORWARD_MASK 0x1000 -#define RTL8367C_ACT11_POLICING_OFFSET 11 -#define RTL8367C_ACT11_POLICING_MASK 0x800 -#define RTL8367C_ACT11_PRIORITY_OFFSET 10 -#define RTL8367C_ACT11_PRIORITY_MASK 0x400 -#define RTL8367C_ACT11_SVID_OFFSET 9 -#define RTL8367C_ACT11_SVID_MASK 0x200 -#define RTL8367C_ACT11_CVID_OFFSET 8 -#define RTL8367C_ACT11_CVID_MASK 0x100 -#define RTL8367C_OP10_NOT_OFFSET 6 -#define RTL8367C_OP10_NOT_MASK 0x40 -#define RTL8367C_ACT10_GPIO_OFFSET 5 -#define RTL8367C_ACT10_GPIO_MASK 0x20 -#define RTL8367C_ACT10_FORWARD_OFFSET 4 -#define RTL8367C_ACT10_FORWARD_MASK 0x10 -#define RTL8367C_ACT10_POLICING_OFFSET 3 -#define RTL8367C_ACT10_POLICING_MASK 0x8 -#define RTL8367C_ACT10_PRIORITY_OFFSET 2 -#define RTL8367C_ACT10_PRIORITY_MASK 0x4 -#define RTL8367C_ACT10_SVID_OFFSET 1 -#define RTL8367C_ACT10_SVID_MASK 0x2 -#define RTL8367C_ACT10_CVID_OFFSET 0 -#define RTL8367C_ACT10_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL6 0x061a -#define RTL8367C_OP13_NOT_OFFSET 14 -#define RTL8367C_OP13_NOT_MASK 0x4000 -#define RTL8367C_ACT13_GPIO_OFFSET 13 -#define RTL8367C_ACT13_GPIO_MASK 0x2000 -#define RTL8367C_ACT13_FORWARD_OFFSET 12 -#define RTL8367C_ACT13_FORWARD_MASK 0x1000 -#define RTL8367C_ACT13_POLICING_OFFSET 11 -#define RTL8367C_ACT13_POLICING_MASK 0x800 -#define RTL8367C_ACT13_PRIORITY_OFFSET 10 -#define RTL8367C_ACT13_PRIORITY_MASK 0x400 -#define RTL8367C_ACT13_SVID_OFFSET 9 -#define RTL8367C_ACT13_SVID_MASK 0x200 -#define RTL8367C_ACT13_CVID_OFFSET 8 -#define RTL8367C_ACT13_CVID_MASK 0x100 -#define RTL8367C_OP12_NOT_OFFSET 6 -#define RTL8367C_OP12_NOT_MASK 0x40 -#define RTL8367C_ACT12_GPIO_OFFSET 5 -#define RTL8367C_ACT12_GPIO_MASK 0x20 -#define RTL8367C_ACT12_FORWARD_OFFSET 4 -#define RTL8367C_ACT12_FORWARD_MASK 0x10 -#define RTL8367C_ACT12_POLICING_OFFSET 3 -#define RTL8367C_ACT12_POLICING_MASK 0x8 -#define RTL8367C_ACT12_PRIORITY_OFFSET 2 -#define RTL8367C_ACT12_PRIORITY_MASK 0x4 -#define RTL8367C_ACT12_SVID_OFFSET 1 -#define RTL8367C_ACT12_SVID_MASK 0x2 -#define RTL8367C_ACT12_CVID_OFFSET 0 -#define RTL8367C_ACT12_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL7 0x061b -#define RTL8367C_OP15_NOT_OFFSET 14 -#define RTL8367C_OP15_NOT_MASK 0x4000 -#define RTL8367C_ACT15_GPIO_OFFSET 13 -#define RTL8367C_ACT15_GPIO_MASK 0x2000 -#define RTL8367C_ACT15_FORWARD_OFFSET 12 -#define RTL8367C_ACT15_FORWARD_MASK 0x1000 -#define RTL8367C_ACT15_POLICING_OFFSET 11 -#define RTL8367C_ACT15_POLICING_MASK 0x800 -#define RTL8367C_ACT15_PRIORITY_OFFSET 10 -#define RTL8367C_ACT15_PRIORITY_MASK 0x400 -#define RTL8367C_ACT15_SVID_OFFSET 9 -#define RTL8367C_ACT15_SVID_MASK 0x200 -#define RTL8367C_ACT15_CVID_OFFSET 8 -#define RTL8367C_ACT15_CVID_MASK 0x100 -#define RTL8367C_OP14_NOT_OFFSET 6 -#define RTL8367C_OP14_NOT_MASK 0x40 -#define RTL8367C_ACT14_GPIO_OFFSET 5 -#define RTL8367C_ACT14_GPIO_MASK 0x20 -#define RTL8367C_ACT14_FORWARD_OFFSET 4 -#define RTL8367C_ACT14_FORWARD_MASK 0x10 -#define RTL8367C_ACT14_POLICING_OFFSET 3 -#define RTL8367C_ACT14_POLICING_MASK 0x8 -#define RTL8367C_ACT14_PRIORITY_OFFSET 2 -#define RTL8367C_ACT14_PRIORITY_MASK 0x4 -#define RTL8367C_ACT14_SVID_OFFSET 1 -#define RTL8367C_ACT14_SVID_MASK 0x2 -#define RTL8367C_ACT14_CVID_OFFSET 0 -#define RTL8367C_ACT14_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL8 0x061c -#define RTL8367C_OP17_NOT_OFFSET 14 -#define RTL8367C_OP17_NOT_MASK 0x4000 -#define RTL8367C_ACT17_GPIO_OFFSET 13 -#define RTL8367C_ACT17_GPIO_MASK 0x2000 -#define RTL8367C_ACT17_FORWARD_OFFSET 12 -#define RTL8367C_ACT17_FORWARD_MASK 0x1000 -#define RTL8367C_ACT17_POLICING_OFFSET 11 -#define RTL8367C_ACT17_POLICING_MASK 0x800 -#define RTL8367C_ACT17_PRIORITY_OFFSET 10 -#define RTL8367C_ACT17_PRIORITY_MASK 0x400 -#define RTL8367C_ACT17_SVID_OFFSET 9 -#define RTL8367C_ACT17_SVID_MASK 0x200 -#define RTL8367C_ACT17_CVID_OFFSET 8 -#define RTL8367C_ACT17_CVID_MASK 0x100 -#define RTL8367C_OP16_NOT_OFFSET 6 -#define RTL8367C_OP16_NOT_MASK 0x40 -#define RTL8367C_ACT16_GPIO_OFFSET 5 -#define RTL8367C_ACT16_GPIO_MASK 0x20 -#define RTL8367C_ACT16_FORWARD_OFFSET 4 -#define RTL8367C_ACT16_FORWARD_MASK 0x10 -#define RTL8367C_ACT16_POLICING_OFFSET 3 -#define RTL8367C_ACT16_POLICING_MASK 0x8 -#define RTL8367C_ACT16_PRIORITY_OFFSET 2 -#define RTL8367C_ACT16_PRIORITY_MASK 0x4 -#define RTL8367C_ACT16_SVID_OFFSET 1 -#define RTL8367C_ACT16_SVID_MASK 0x2 -#define RTL8367C_ACT16_CVID_OFFSET 0 -#define RTL8367C_ACT16_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL9 0x061d -#define RTL8367C_OP19_NOT_OFFSET 14 -#define RTL8367C_OP19_NOT_MASK 0x4000 -#define RTL8367C_ACT19_GPIO_OFFSET 13 -#define RTL8367C_ACT19_GPIO_MASK 0x2000 -#define RTL8367C_ACT19_FORWARD_OFFSET 12 -#define RTL8367C_ACT19_FORWARD_MASK 0x1000 -#define RTL8367C_ACT19_POLICING_OFFSET 11 -#define RTL8367C_ACT19_POLICING_MASK 0x800 -#define RTL8367C_ACT19_PRIORITY_OFFSET 10 -#define RTL8367C_ACT19_PRIORITY_MASK 0x400 -#define RTL8367C_ACT19_SVID_OFFSET 9 -#define RTL8367C_ACT19_SVID_MASK 0x200 -#define RTL8367C_ACT19_CVID_OFFSET 8 -#define RTL8367C_ACT19_CVID_MASK 0x100 -#define RTL8367C_OP18_NOT_OFFSET 6 -#define RTL8367C_OP18_NOT_MASK 0x40 -#define RTL8367C_ACT18_GPIO_OFFSET 5 -#define RTL8367C_ACT18_GPIO_MASK 0x20 -#define RTL8367C_ACT18_FORWARD_OFFSET 4 -#define RTL8367C_ACT18_FORWARD_MASK 0x10 -#define RTL8367C_ACT18_POLICING_OFFSET 3 -#define RTL8367C_ACT18_POLICING_MASK 0x8 -#define RTL8367C_ACT18_PRIORITY_OFFSET 2 -#define RTL8367C_ACT18_PRIORITY_MASK 0x4 -#define RTL8367C_ACT18_SVID_OFFSET 1 -#define RTL8367C_ACT18_SVID_MASK 0x2 -#define RTL8367C_ACT18_CVID_OFFSET 0 -#define RTL8367C_ACT18_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL10 0x061e -#define RTL8367C_OP21_NOT_OFFSET 14 -#define RTL8367C_OP21_NOT_MASK 0x4000 -#define RTL8367C_ACT21_GPIO_OFFSET 13 -#define RTL8367C_ACT21_GPIO_MASK 0x2000 -#define RTL8367C_ACT21_FORWARD_OFFSET 12 -#define RTL8367C_ACT21_FORWARD_MASK 0x1000 -#define RTL8367C_ACT21_POLICING_OFFSET 11 -#define RTL8367C_ACT21_POLICING_MASK 0x800 -#define RTL8367C_ACT21_PRIORITY_OFFSET 10 -#define RTL8367C_ACT21_PRIORITY_MASK 0x400 -#define RTL8367C_ACT21_SVID_OFFSET 9 -#define RTL8367C_ACT21_SVID_MASK 0x200 -#define RTL8367C_ACT21_CVID_OFFSET 8 -#define RTL8367C_ACT21_CVID_MASK 0x100 -#define RTL8367C_OP20_NOT_OFFSET 6 -#define RTL8367C_OP20_NOT_MASK 0x40 -#define RTL8367C_ACT20_GPIO_OFFSET 5 -#define RTL8367C_ACT20_GPIO_MASK 0x20 -#define RTL8367C_ACT20_FORWARD_OFFSET 4 -#define RTL8367C_ACT20_FORWARD_MASK 0x10 -#define RTL8367C_ACT20_POLICING_OFFSET 3 -#define RTL8367C_ACT20_POLICING_MASK 0x8 -#define RTL8367C_ACT20_PRIORITY_OFFSET 2 -#define RTL8367C_ACT20_PRIORITY_MASK 0x4 -#define RTL8367C_ACT20_SVID_OFFSET 1 -#define RTL8367C_ACT20_SVID_MASK 0x2 -#define RTL8367C_ACT20_CVID_OFFSET 0 -#define RTL8367C_ACT20_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL11 0x061f -#define RTL8367C_OP23_NOT_OFFSET 14 -#define RTL8367C_OP23_NOT_MASK 0x4000 -#define RTL8367C_ACT23_GPIO_OFFSET 13 -#define RTL8367C_ACT23_GPIO_MASK 0x2000 -#define RTL8367C_ACT23_FORWARD_OFFSET 12 -#define RTL8367C_ACT23_FORWARD_MASK 0x1000 -#define RTL8367C_ACT23_POLICING_OFFSET 11 -#define RTL8367C_ACT23_POLICING_MASK 0x800 -#define RTL8367C_ACT23_PRIORITY_OFFSET 10 -#define RTL8367C_ACT23_PRIORITY_MASK 0x400 -#define RTL8367C_ACT23_SVID_OFFSET 9 -#define RTL8367C_ACT23_SVID_MASK 0x200 -#define RTL8367C_ACT23_CVID_OFFSET 8 -#define RTL8367C_ACT23_CVID_MASK 0x100 -#define RTL8367C_OP22_NOT_OFFSET 6 -#define RTL8367C_OP22_NOT_MASK 0x40 -#define RTL8367C_ACT22_GPIO_OFFSET 5 -#define RTL8367C_ACT22_GPIO_MASK 0x20 -#define RTL8367C_ACT22_FORWARD_OFFSET 4 -#define RTL8367C_ACT22_FORWARD_MASK 0x10 -#define RTL8367C_ACT22_POLICING_OFFSET 3 -#define RTL8367C_ACT22_POLICING_MASK 0x8 -#define RTL8367C_ACT22_PRIORITY_OFFSET 2 -#define RTL8367C_ACT22_PRIORITY_MASK 0x4 -#define RTL8367C_ACT22_SVID_OFFSET 1 -#define RTL8367C_ACT22_SVID_MASK 0x2 -#define RTL8367C_ACT22_CVID_OFFSET 0 -#define RTL8367C_ACT22_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL12 0x0620 -#define RTL8367C_OP25_NOT_OFFSET 14 -#define RTL8367C_OP25_NOT_MASK 0x4000 -#define RTL8367C_ACT25_GPIO_OFFSET 13 -#define RTL8367C_ACT25_GPIO_MASK 0x2000 -#define RTL8367C_ACT25_FORWARD_OFFSET 12 -#define RTL8367C_ACT25_FORWARD_MASK 0x1000 -#define RTL8367C_ACT25_POLICING_OFFSET 11 -#define RTL8367C_ACT25_POLICING_MASK 0x800 -#define RTL8367C_ACT25_PRIORITY_OFFSET 10 -#define RTL8367C_ACT25_PRIORITY_MASK 0x400 -#define RTL8367C_ACT25_SVID_OFFSET 9 -#define RTL8367C_ACT25_SVID_MASK 0x200 -#define RTL8367C_ACT25_CVID_OFFSET 8 -#define RTL8367C_ACT25_CVID_MASK 0x100 -#define RTL8367C_OP24_NOT_OFFSET 6 -#define RTL8367C_OP24_NOT_MASK 0x40 -#define RTL8367C_ACT24_GPIO_OFFSET 5 -#define RTL8367C_ACT24_GPIO_MASK 0x20 -#define RTL8367C_ACT24_FORWARD_OFFSET 4 -#define RTL8367C_ACT24_FORWARD_MASK 0x10 -#define RTL8367C_ACT24_POLICING_OFFSET 3 -#define RTL8367C_ACT24_POLICING_MASK 0x8 -#define RTL8367C_ACT24_PRIORITY_OFFSET 2 -#define RTL8367C_ACT24_PRIORITY_MASK 0x4 -#define RTL8367C_ACT24_SVID_OFFSET 1 -#define RTL8367C_ACT24_SVID_MASK 0x2 -#define RTL8367C_ACT24_CVID_OFFSET 0 -#define RTL8367C_ACT24_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL13 0x0621 -#define RTL8367C_OP27_NOT_OFFSET 14 -#define RTL8367C_OP27_NOT_MASK 0x4000 -#define RTL8367C_ACT27_GPIO_OFFSET 13 -#define RTL8367C_ACT27_GPIO_MASK 0x2000 -#define RTL8367C_ACT27_FORWARD_OFFSET 12 -#define RTL8367C_ACT27_FORWARD_MASK 0x1000 -#define RTL8367C_ACT27_POLICING_OFFSET 11 -#define RTL8367C_ACT27_POLICING_MASK 0x800 -#define RTL8367C_ACT27_PRIORITY_OFFSET 10 -#define RTL8367C_ACT27_PRIORITY_MASK 0x400 -#define RTL8367C_ACT27_SVID_OFFSET 9 -#define RTL8367C_ACT27_SVID_MASK 0x200 -#define RTL8367C_ACT27_CVID_OFFSET 8 -#define RTL8367C_ACT27_CVID_MASK 0x100 -#define RTL8367C_OP26_NOT_OFFSET 6 -#define RTL8367C_OP26_NOT_MASK 0x40 -#define RTL8367C_ACT26_GPIO_OFFSET 5 -#define RTL8367C_ACT26_GPIO_MASK 0x20 -#define RTL8367C_ACT26_FORWARD_OFFSET 4 -#define RTL8367C_ACT26_FORWARD_MASK 0x10 -#define RTL8367C_ACT26_POLICING_OFFSET 3 -#define RTL8367C_ACT26_POLICING_MASK 0x8 -#define RTL8367C_ACT26_PRIORITY_OFFSET 2 -#define RTL8367C_ACT26_PRIORITY_MASK 0x4 -#define RTL8367C_ACT26_SVID_OFFSET 1 -#define RTL8367C_ACT26_SVID_MASK 0x2 -#define RTL8367C_ACT26_CVID_OFFSET 0 -#define RTL8367C_ACT26_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL14 0x0622 -#define RTL8367C_OP29_NOT_OFFSET 14 -#define RTL8367C_OP29_NOT_MASK 0x4000 -#define RTL8367C_ACT29_GPIO_OFFSET 13 -#define RTL8367C_ACT29_GPIO_MASK 0x2000 -#define RTL8367C_ACT29_FORWARD_OFFSET 12 -#define RTL8367C_ACT29_FORWARD_MASK 0x1000 -#define RTL8367C_ACT29_POLICING_OFFSET 11 -#define RTL8367C_ACT29_POLICING_MASK 0x800 -#define RTL8367C_ACT29_PRIORITY_OFFSET 10 -#define RTL8367C_ACT29_PRIORITY_MASK 0x400 -#define RTL8367C_ACT29_SVID_OFFSET 9 -#define RTL8367C_ACT29_SVID_MASK 0x200 -#define RTL8367C_ACT29_CVID_OFFSET 8 -#define RTL8367C_ACT29_CVID_MASK 0x100 -#define RTL8367C_OP28_NOT_OFFSET 6 -#define RTL8367C_OP28_NOT_MASK 0x40 -#define RTL8367C_ACT28_GPIO_OFFSET 5 -#define RTL8367C_ACT28_GPIO_MASK 0x20 -#define RTL8367C_ACT28_FORWARD_OFFSET 4 -#define RTL8367C_ACT28_FORWARD_MASK 0x10 -#define RTL8367C_ACT28_POLICING_OFFSET 3 -#define RTL8367C_ACT28_POLICING_MASK 0x8 -#define RTL8367C_ACT28_PRIORITY_OFFSET 2 -#define RTL8367C_ACT28_PRIORITY_MASK 0x4 -#define RTL8367C_ACT28_SVID_OFFSET 1 -#define RTL8367C_ACT28_SVID_MASK 0x2 -#define RTL8367C_ACT28_CVID_OFFSET 0 -#define RTL8367C_ACT28_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL15 0x0623 -#define RTL8367C_OP31_NOT_OFFSET 14 -#define RTL8367C_OP31_NOT_MASK 0x4000 -#define RTL8367C_ACT31_GPIO_OFFSET 13 -#define RTL8367C_ACT31_GPIO_MASK 0x2000 -#define RTL8367C_ACT31_FORWARD_OFFSET 12 -#define RTL8367C_ACT31_FORWARD_MASK 0x1000 -#define RTL8367C_ACT31_POLICING_OFFSET 11 -#define RTL8367C_ACT31_POLICING_MASK 0x800 -#define RTL8367C_ACT31_PRIORITY_OFFSET 10 -#define RTL8367C_ACT31_PRIORITY_MASK 0x400 -#define RTL8367C_ACT31_SVID_OFFSET 9 -#define RTL8367C_ACT31_SVID_MASK 0x200 -#define RTL8367C_ACT31_CVID_OFFSET 8 -#define RTL8367C_ACT31_CVID_MASK 0x100 -#define RTL8367C_OP30_NOT_OFFSET 6 -#define RTL8367C_OP30_NOT_MASK 0x40 -#define RTL8367C_ACT30_GPIO_OFFSET 5 -#define RTL8367C_ACT30_GPIO_MASK 0x20 -#define RTL8367C_ACT30_FORWARD_OFFSET 4 -#define RTL8367C_ACT30_FORWARD_MASK 0x10 -#define RTL8367C_ACT30_POLICING_OFFSET 3 -#define RTL8367C_ACT30_POLICING_MASK 0x8 -#define RTL8367C_ACT30_PRIORITY_OFFSET 2 -#define RTL8367C_ACT30_PRIORITY_MASK 0x4 -#define RTL8367C_ACT30_SVID_OFFSET 1 -#define RTL8367C_ACT30_SVID_MASK 0x2 -#define RTL8367C_ACT30_CVID_OFFSET 0 -#define RTL8367C_ACT30_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL16 0x0624 -#define RTL8367C_OP33_NOT_OFFSET 14 -#define RTL8367C_OP33_NOT_MASK 0x4000 -#define RTL8367C_ACT33_GPIO_OFFSET 13 -#define RTL8367C_ACT33_GPIO_MASK 0x2000 -#define RTL8367C_ACT33_FORWARD_OFFSET 12 -#define RTL8367C_ACT33_FORWARD_MASK 0x1000 -#define RTL8367C_ACT33_POLICING_OFFSET 11 -#define RTL8367C_ACT33_POLICING_MASK 0x800 -#define RTL8367C_ACT33_PRIORITY_OFFSET 10 -#define RTL8367C_ACT33_PRIORITY_MASK 0x400 -#define RTL8367C_ACT33_SVID_OFFSET 9 -#define RTL8367C_ACT33_SVID_MASK 0x200 -#define RTL8367C_ACT33_CVID_OFFSET 8 -#define RTL8367C_ACT33_CVID_MASK 0x100 -#define RTL8367C_OP32_NOT_OFFSET 6 -#define RTL8367C_OP32_NOT_MASK 0x40 -#define RTL8367C_ACT32_GPIO_OFFSET 5 -#define RTL8367C_ACT32_GPIO_MASK 0x20 -#define RTL8367C_ACT32_FORWARD_OFFSET 4 -#define RTL8367C_ACT32_FORWARD_MASK 0x10 -#define RTL8367C_ACT32_POLICING_OFFSET 3 -#define RTL8367C_ACT32_POLICING_MASK 0x8 -#define RTL8367C_ACT32_PRIORITY_OFFSET 2 -#define RTL8367C_ACT32_PRIORITY_MASK 0x4 -#define RTL8367C_ACT32_SVID_OFFSET 1 -#define RTL8367C_ACT32_SVID_MASK 0x2 -#define RTL8367C_ACT32_CVID_OFFSET 0 -#define RTL8367C_ACT32_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL17 0x0625 -#define RTL8367C_OP35_NOT_OFFSET 14 -#define RTL8367C_OP35_NOT_MASK 0x4000 -#define RTL8367C_ACT35_GPIO_OFFSET 13 -#define RTL8367C_ACT35_GPIO_MASK 0x2000 -#define RTL8367C_ACT35_FORWARD_OFFSET 12 -#define RTL8367C_ACT35_FORWARD_MASK 0x1000 -#define RTL8367C_ACT35_POLICING_OFFSET 11 -#define RTL8367C_ACT35_POLICING_MASK 0x800 -#define RTL8367C_ACT35_PRIORITY_OFFSET 10 -#define RTL8367C_ACT35_PRIORITY_MASK 0x400 -#define RTL8367C_ACT35_SVID_OFFSET 9 -#define RTL8367C_ACT35_SVID_MASK 0x200 -#define RTL8367C_ACT35_CVID_OFFSET 8 -#define RTL8367C_ACT35_CVID_MASK 0x100 -#define RTL8367C_OP34_NOT_OFFSET 6 -#define RTL8367C_OP34_NOT_MASK 0x40 -#define RTL8367C_ACT34_GPIO_OFFSET 5 -#define RTL8367C_ACT34_GPIO_MASK 0x20 -#define RTL8367C_ACT34_FORWARD_OFFSET 4 -#define RTL8367C_ACT34_FORWARD_MASK 0x10 -#define RTL8367C_ACT34_POLICING_OFFSET 3 -#define RTL8367C_ACT34_POLICING_MASK 0x8 -#define RTL8367C_ACT34_PRIORITY_OFFSET 2 -#define RTL8367C_ACT34_PRIORITY_MASK 0x4 -#define RTL8367C_ACT34_SVID_OFFSET 1 -#define RTL8367C_ACT34_SVID_MASK 0x2 -#define RTL8367C_ACT34_CVID_OFFSET 0 -#define RTL8367C_ACT34_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL18 0x0626 -#define RTL8367C_OP37_NOT_OFFSET 14 -#define RTL8367C_OP37_NOT_MASK 0x4000 -#define RTL8367C_ACT37_GPIO_OFFSET 13 -#define RTL8367C_ACT37_GPIO_MASK 0x2000 -#define RTL8367C_ACT37_FORWARD_OFFSET 12 -#define RTL8367C_ACT37_FORWARD_MASK 0x1000 -#define RTL8367C_ACT37_POLICING_OFFSET 11 -#define RTL8367C_ACT37_POLICING_MASK 0x800 -#define RTL8367C_ACT37_PRIORITY_OFFSET 10 -#define RTL8367C_ACT37_PRIORITY_MASK 0x400 -#define RTL8367C_ACT37_SVID_OFFSET 9 -#define RTL8367C_ACT37_SVID_MASK 0x200 -#define RTL8367C_ACT37_CVID_OFFSET 8 -#define RTL8367C_ACT37_CVID_MASK 0x100 -#define RTL8367C_OP36_NOT_OFFSET 6 -#define RTL8367C_OP36_NOT_MASK 0x40 -#define RTL8367C_ACT36_GPIO_OFFSET 5 -#define RTL8367C_ACT36_GPIO_MASK 0x20 -#define RTL8367C_ACT36_FORWARD_OFFSET 4 -#define RTL8367C_ACT36_FORWARD_MASK 0x10 -#define RTL8367C_ACT36_POLICING_OFFSET 3 -#define RTL8367C_ACT36_POLICING_MASK 0x8 -#define RTL8367C_ACT36_PRIORITY_OFFSET 2 -#define RTL8367C_ACT36_PRIORITY_MASK 0x4 -#define RTL8367C_ACT36_SVID_OFFSET 1 -#define RTL8367C_ACT36_SVID_MASK 0x2 -#define RTL8367C_ACT36_CVID_OFFSET 0 -#define RTL8367C_ACT36_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL19 0x0627 -#define RTL8367C_OP39_NOT_OFFSET 14 -#define RTL8367C_OP39_NOT_MASK 0x4000 -#define RTL8367C_ACT39_GPIO_OFFSET 13 -#define RTL8367C_ACT39_GPIO_MASK 0x2000 -#define RTL8367C_ACT39_FORWARD_OFFSET 12 -#define RTL8367C_ACT39_FORWARD_MASK 0x1000 -#define RTL8367C_ACT39_POLICING_OFFSET 11 -#define RTL8367C_ACT39_POLICING_MASK 0x800 -#define RTL8367C_ACT39_PRIORITY_OFFSET 10 -#define RTL8367C_ACT39_PRIORITY_MASK 0x400 -#define RTL8367C_ACT39_SVID_OFFSET 9 -#define RTL8367C_ACT39_SVID_MASK 0x200 -#define RTL8367C_ACT39_CVID_OFFSET 8 -#define RTL8367C_ACT39_CVID_MASK 0x100 -#define RTL8367C_OP38_NOT_OFFSET 6 -#define RTL8367C_OP38_NOT_MASK 0x40 -#define RTL8367C_ACT38_GPIO_OFFSET 5 -#define RTL8367C_ACT38_GPIO_MASK 0x20 -#define RTL8367C_ACT38_FORWARD_OFFSET 4 -#define RTL8367C_ACT38_FORWARD_MASK 0x10 -#define RTL8367C_ACT38_POLICING_OFFSET 3 -#define RTL8367C_ACT38_POLICING_MASK 0x8 -#define RTL8367C_ACT38_PRIORITY_OFFSET 2 -#define RTL8367C_ACT38_PRIORITY_MASK 0x4 -#define RTL8367C_ACT38_SVID_OFFSET 1 -#define RTL8367C_ACT38_SVID_MASK 0x2 -#define RTL8367C_ACT38_CVID_OFFSET 0 -#define RTL8367C_ACT38_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL20 0x0628 -#define RTL8367C_OP41_NOT_OFFSET 14 -#define RTL8367C_OP41_NOT_MASK 0x4000 -#define RTL8367C_ACT41_GPIO_OFFSET 13 -#define RTL8367C_ACT41_GPIO_MASK 0x2000 -#define RTL8367C_ACT41_FORWARD_OFFSET 12 -#define RTL8367C_ACT41_FORWARD_MASK 0x1000 -#define RTL8367C_ACT41_POLICING_OFFSET 11 -#define RTL8367C_ACT41_POLICING_MASK 0x800 -#define RTL8367C_ACT41_PRIORITY_OFFSET 10 -#define RTL8367C_ACT41_PRIORITY_MASK 0x400 -#define RTL8367C_ACT41_SVID_OFFSET 9 -#define RTL8367C_ACT41_SVID_MASK 0x200 -#define RTL8367C_ACT41_CVID_OFFSET 8 -#define RTL8367C_ACT41_CVID_MASK 0x100 -#define RTL8367C_OP40_NOT_OFFSET 6 -#define RTL8367C_OP40_NOT_MASK 0x40 -#define RTL8367C_ACT40_GPIO_OFFSET 5 -#define RTL8367C_ACT40_GPIO_MASK 0x20 -#define RTL8367C_ACT40_FORWARD_OFFSET 4 -#define RTL8367C_ACT40_FORWARD_MASK 0x10 -#define RTL8367C_ACT40_POLICING_OFFSET 3 -#define RTL8367C_ACT40_POLICING_MASK 0x8 -#define RTL8367C_ACT40_PRIORITY_OFFSET 2 -#define RTL8367C_ACT40_PRIORITY_MASK 0x4 -#define RTL8367C_ACT40_SVID_OFFSET 1 -#define RTL8367C_ACT40_SVID_MASK 0x2 -#define RTL8367C_ACT40_CVID_OFFSET 0 -#define RTL8367C_ACT40_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL21 0x0629 -#define RTL8367C_OP43_NOT_OFFSET 14 -#define RTL8367C_OP43_NOT_MASK 0x4000 -#define RTL8367C_ACT43_GPIO_OFFSET 13 -#define RTL8367C_ACT43_GPIO_MASK 0x2000 -#define RTL8367C_ACT43_FORWARD_OFFSET 12 -#define RTL8367C_ACT43_FORWARD_MASK 0x1000 -#define RTL8367C_ACT43_POLICING_OFFSET 11 -#define RTL8367C_ACT43_POLICING_MASK 0x800 -#define RTL8367C_ACT43_PRIORITY_OFFSET 10 -#define RTL8367C_ACT43_PRIORITY_MASK 0x400 -#define RTL8367C_ACT43_SVID_OFFSET 9 -#define RTL8367C_ACT43_SVID_MASK 0x200 -#define RTL8367C_ACT43_CVID_OFFSET 8 -#define RTL8367C_ACT43_CVID_MASK 0x100 -#define RTL8367C_OP42_NOT_OFFSET 6 -#define RTL8367C_OP42_NOT_MASK 0x40 -#define RTL8367C_ACT42_GPIO_OFFSET 5 -#define RTL8367C_ACT42_GPIO_MASK 0x20 -#define RTL8367C_ACT42_FORWARD_OFFSET 4 -#define RTL8367C_ACT42_FORWARD_MASK 0x10 -#define RTL8367C_ACT42_POLICING_OFFSET 3 -#define RTL8367C_ACT42_POLICING_MASK 0x8 -#define RTL8367C_ACT42_PRIORITY_OFFSET 2 -#define RTL8367C_ACT42_PRIORITY_MASK 0x4 -#define RTL8367C_ACT42_SVID_OFFSET 1 -#define RTL8367C_ACT42_SVID_MASK 0x2 -#define RTL8367C_ACT42_CVID_OFFSET 0 -#define RTL8367C_ACT42_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL22 0x062a -#define RTL8367C_OP45_NOT_OFFSET 14 -#define RTL8367C_OP45_NOT_MASK 0x4000 -#define RTL8367C_ACT45_GPIO_OFFSET 13 -#define RTL8367C_ACT45_GPIO_MASK 0x2000 -#define RTL8367C_ACT45_FORWARD_OFFSET 12 -#define RTL8367C_ACT45_FORWARD_MASK 0x1000 -#define RTL8367C_ACT45_POLICING_OFFSET 11 -#define RTL8367C_ACT45_POLICING_MASK 0x800 -#define RTL8367C_ACT45_PRIORITY_OFFSET 10 -#define RTL8367C_ACT45_PRIORITY_MASK 0x400 -#define RTL8367C_ACT45_SVID_OFFSET 9 -#define RTL8367C_ACT45_SVID_MASK 0x200 -#define RTL8367C_ACT45_CVID_OFFSET 8 -#define RTL8367C_ACT45_CVID_MASK 0x100 -#define RTL8367C_OP44_NOT_OFFSET 6 -#define RTL8367C_OP44_NOT_MASK 0x40 -#define RTL8367C_ACT44_GPIO_OFFSET 5 -#define RTL8367C_ACT44_GPIO_MASK 0x20 -#define RTL8367C_ACT44_FORWARD_OFFSET 4 -#define RTL8367C_ACT44_FORWARD_MASK 0x10 -#define RTL8367C_ACT44_POLICING_OFFSET 3 -#define RTL8367C_ACT44_POLICING_MASK 0x8 -#define RTL8367C_ACT44_PRIORITY_OFFSET 2 -#define RTL8367C_ACT44_PRIORITY_MASK 0x4 -#define RTL8367C_ACT44_SVID_OFFSET 1 -#define RTL8367C_ACT44_SVID_MASK 0x2 -#define RTL8367C_ACT44_CVID_OFFSET 0 -#define RTL8367C_ACT44_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL23 0x062b -#define RTL8367C_OP47_NOT_OFFSET 14 -#define RTL8367C_OP47_NOT_MASK 0x4000 -#define RTL8367C_ACT47_GPIO_OFFSET 13 -#define RTL8367C_ACT47_GPIO_MASK 0x2000 -#define RTL8367C_ACT47_FORWARD_OFFSET 12 -#define RTL8367C_ACT47_FORWARD_MASK 0x1000 -#define RTL8367C_ACT47_POLICING_OFFSET 11 -#define RTL8367C_ACT47_POLICING_MASK 0x800 -#define RTL8367C_ACT47_PRIORITY_OFFSET 10 -#define RTL8367C_ACT47_PRIORITY_MASK 0x400 -#define RTL8367C_ACT47_SVID_OFFSET 9 -#define RTL8367C_ACT47_SVID_MASK 0x200 -#define RTL8367C_ACT47_CVID_OFFSET 8 -#define RTL8367C_ACT47_CVID_MASK 0x100 -#define RTL8367C_OP46_NOT_OFFSET 6 -#define RTL8367C_OP46_NOT_MASK 0x40 -#define RTL8367C_ACT46_GPIO_OFFSET 5 -#define RTL8367C_ACT46_GPIO_MASK 0x20 -#define RTL8367C_ACT46_FORWARD_OFFSET 4 -#define RTL8367C_ACT46_FORWARD_MASK 0x10 -#define RTL8367C_ACT46_POLICING_OFFSET 3 -#define RTL8367C_ACT46_POLICING_MASK 0x8 -#define RTL8367C_ACT46_PRIORITY_OFFSET 2 -#define RTL8367C_ACT46_PRIORITY_MASK 0x4 -#define RTL8367C_ACT46_SVID_OFFSET 1 -#define RTL8367C_ACT46_SVID_MASK 0x2 -#define RTL8367C_ACT46_CVID_OFFSET 0 -#define RTL8367C_ACT46_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL24 0x062c -#define RTL8367C_OP49_NOT_OFFSET 14 -#define RTL8367C_OP49_NOT_MASK 0x4000 -#define RTL8367C_ACT49_GPIO_OFFSET 13 -#define RTL8367C_ACT49_GPIO_MASK 0x2000 -#define RTL8367C_ACT49_FORWARD_OFFSET 12 -#define RTL8367C_ACT49_FORWARD_MASK 0x1000 -#define RTL8367C_ACT49_POLICING_OFFSET 11 -#define RTL8367C_ACT49_POLICING_MASK 0x800 -#define RTL8367C_ACT49_PRIORITY_OFFSET 10 -#define RTL8367C_ACT49_PRIORITY_MASK 0x400 -#define RTL8367C_ACT49_SVID_OFFSET 9 -#define RTL8367C_ACT49_SVID_MASK 0x200 -#define RTL8367C_ACT49_CVID_OFFSET 8 -#define RTL8367C_ACT49_CVID_MASK 0x100 -#define RTL8367C_OP48_NOT_OFFSET 6 -#define RTL8367C_OP48_NOT_MASK 0x40 -#define RTL8367C_ACT48_GPIO_OFFSET 5 -#define RTL8367C_ACT48_GPIO_MASK 0x20 -#define RTL8367C_ACT48_FORWARD_OFFSET 4 -#define RTL8367C_ACT48_FORWARD_MASK 0x10 -#define RTL8367C_ACT48_POLICING_OFFSET 3 -#define RTL8367C_ACT48_POLICING_MASK 0x8 -#define RTL8367C_ACT48_PRIORITY_OFFSET 2 -#define RTL8367C_ACT48_PRIORITY_MASK 0x4 -#define RTL8367C_ACT48_SVID_OFFSET 1 -#define RTL8367C_ACT48_SVID_MASK 0x2 -#define RTL8367C_ACT48_CVID_OFFSET 0 -#define RTL8367C_ACT48_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL25 0x062d -#define RTL8367C_OP51_NOT_OFFSET 14 -#define RTL8367C_OP51_NOT_MASK 0x4000 -#define RTL8367C_ACT51_GPIO_OFFSET 13 -#define RTL8367C_ACT51_GPIO_MASK 0x2000 -#define RTL8367C_ACT51_FORWARD_OFFSET 12 -#define RTL8367C_ACT51_FORWARD_MASK 0x1000 -#define RTL8367C_ACT51_POLICING_OFFSET 11 -#define RTL8367C_ACT51_POLICING_MASK 0x800 -#define RTL8367C_ACT51_PRIORITY_OFFSET 10 -#define RTL8367C_ACT51_PRIORITY_MASK 0x400 -#define RTL8367C_ACT51_SVID_OFFSET 9 -#define RTL8367C_ACT51_SVID_MASK 0x200 -#define RTL8367C_ACT51_CVID_OFFSET 8 -#define RTL8367C_ACT51_CVID_MASK 0x100 -#define RTL8367C_OP50_NOT_OFFSET 6 -#define RTL8367C_OP50_NOT_MASK 0x40 -#define RTL8367C_ACT50_GPIO_OFFSET 5 -#define RTL8367C_ACT50_GPIO_MASK 0x20 -#define RTL8367C_ACT50_FORWARD_OFFSET 4 -#define RTL8367C_ACT50_FORWARD_MASK 0x10 -#define RTL8367C_ACT50_POLICING_OFFSET 3 -#define RTL8367C_ACT50_POLICING_MASK 0x8 -#define RTL8367C_ACT50_PRIORITY_OFFSET 2 -#define RTL8367C_ACT50_PRIORITY_MASK 0x4 -#define RTL8367C_ACT50_SVID_OFFSET 1 -#define RTL8367C_ACT50_SVID_MASK 0x2 -#define RTL8367C_ACT50_CVID_OFFSET 0 -#define RTL8367C_ACT50_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL26 0x062e -#define RTL8367C_OP53_NOT_OFFSET 14 -#define RTL8367C_OP53_NOT_MASK 0x4000 -#define RTL8367C_ACT53_GPIO_OFFSET 13 -#define RTL8367C_ACT53_GPIO_MASK 0x2000 -#define RTL8367C_ACT53_FORWARD_OFFSET 12 -#define RTL8367C_ACT53_FORWARD_MASK 0x1000 -#define RTL8367C_ACT53_POLICING_OFFSET 11 -#define RTL8367C_ACT53_POLICING_MASK 0x800 -#define RTL8367C_ACT53_PRIORITY_OFFSET 10 -#define RTL8367C_ACT53_PRIORITY_MASK 0x400 -#define RTL8367C_ACT53_SVID_OFFSET 9 -#define RTL8367C_ACT53_SVID_MASK 0x200 -#define RTL8367C_ACT53_CVID_OFFSET 8 -#define RTL8367C_ACT53_CVID_MASK 0x100 -#define RTL8367C_OP52_NOT_OFFSET 6 -#define RTL8367C_OP52_NOT_MASK 0x40 -#define RTL8367C_ACT52_GPIO_OFFSET 5 -#define RTL8367C_ACT52_GPIO_MASK 0x20 -#define RTL8367C_ACT52_FORWARD_OFFSET 4 -#define RTL8367C_ACT52_FORWARD_MASK 0x10 -#define RTL8367C_ACT52_POLICING_OFFSET 3 -#define RTL8367C_ACT52_POLICING_MASK 0x8 -#define RTL8367C_ACT52_PRIORITY_OFFSET 2 -#define RTL8367C_ACT52_PRIORITY_MASK 0x4 -#define RTL8367C_ACT52_SVID_OFFSET 1 -#define RTL8367C_ACT52_SVID_MASK 0x2 -#define RTL8367C_ACT52_CVID_OFFSET 0 -#define RTL8367C_ACT52_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL27 0x062f -#define RTL8367C_OP55_NOT_OFFSET 14 -#define RTL8367C_OP55_NOT_MASK 0x4000 -#define RTL8367C_ACT55_GPIO_OFFSET 13 -#define RTL8367C_ACT55_GPIO_MASK 0x2000 -#define RTL8367C_ACT55_FORWARD_OFFSET 12 -#define RTL8367C_ACT55_FORWARD_MASK 0x1000 -#define RTL8367C_ACT55_POLICING_OFFSET 11 -#define RTL8367C_ACT55_POLICING_MASK 0x800 -#define RTL8367C_ACT55_PRIORITY_OFFSET 10 -#define RTL8367C_ACT55_PRIORITY_MASK 0x400 -#define RTL8367C_ACT55_SVID_OFFSET 9 -#define RTL8367C_ACT55_SVID_MASK 0x200 -#define RTL8367C_ACT55_CVID_OFFSET 8 -#define RTL8367C_ACT55_CVID_MASK 0x100 -#define RTL8367C_OP54_NOT_OFFSET 6 -#define RTL8367C_OP54_NOT_MASK 0x40 -#define RTL8367C_ACT54_GPIO_OFFSET 5 -#define RTL8367C_ACT54_GPIO_MASK 0x20 -#define RTL8367C_ACT54_FORWARD_OFFSET 4 -#define RTL8367C_ACT54_FORWARD_MASK 0x10 -#define RTL8367C_ACT54_POLICING_OFFSET 3 -#define RTL8367C_ACT54_POLICING_MASK 0x8 -#define RTL8367C_ACT54_PRIORITY_OFFSET 2 -#define RTL8367C_ACT54_PRIORITY_MASK 0x4 -#define RTL8367C_ACT54_SVID_OFFSET 1 -#define RTL8367C_ACT54_SVID_MASK 0x2 -#define RTL8367C_ACT54_CVID_OFFSET 0 -#define RTL8367C_ACT54_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL28 0x0630 -#define RTL8367C_OP57_NOT_OFFSET 14 -#define RTL8367C_OP57_NOT_MASK 0x4000 -#define RTL8367C_ACT57_GPIO_OFFSET 13 -#define RTL8367C_ACT57_GPIO_MASK 0x2000 -#define RTL8367C_ACT57_FORWARD_OFFSET 12 -#define RTL8367C_ACT57_FORWARD_MASK 0x1000 -#define RTL8367C_ACT57_POLICING_OFFSET 11 -#define RTL8367C_ACT57_POLICING_MASK 0x800 -#define RTL8367C_ACT57_PRIORITY_OFFSET 10 -#define RTL8367C_ACT57_PRIORITY_MASK 0x400 -#define RTL8367C_ACT57_SVID_OFFSET 9 -#define RTL8367C_ACT57_SVID_MASK 0x200 -#define RTL8367C_ACT57_CVID_OFFSET 8 -#define RTL8367C_ACT57_CVID_MASK 0x100 -#define RTL8367C_OP56_NOT_OFFSET 6 -#define RTL8367C_OP56_NOT_MASK 0x40 -#define RTL8367C_ACT56_GPIO_OFFSET 5 -#define RTL8367C_ACT56_GPIO_MASK 0x20 -#define RTL8367C_ACT56_FORWARD_OFFSET 4 -#define RTL8367C_ACT56_FORWARD_MASK 0x10 -#define RTL8367C_ACT56_POLICING_OFFSET 3 -#define RTL8367C_ACT56_POLICING_MASK 0x8 -#define RTL8367C_ACT56_PRIORITY_OFFSET 2 -#define RTL8367C_ACT56_PRIORITY_MASK 0x4 -#define RTL8367C_ACT56_SVID_OFFSET 1 -#define RTL8367C_ACT56_SVID_MASK 0x2 -#define RTL8367C_ACT56_CVID_OFFSET 0 -#define RTL8367C_ACT56_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL29 0x0631 -#define RTL8367C_OP59_NOT_OFFSET 14 -#define RTL8367C_OP59_NOT_MASK 0x4000 -#define RTL8367C_ACT59_GPIO_OFFSET 13 -#define RTL8367C_ACT59_GPIO_MASK 0x2000 -#define RTL8367C_ACT59_FORWARD_OFFSET 12 -#define RTL8367C_ACT59_FORWARD_MASK 0x1000 -#define RTL8367C_ACT59_POLICING_OFFSET 11 -#define RTL8367C_ACT59_POLICING_MASK 0x800 -#define RTL8367C_ACT59_PRIORITY_OFFSET 10 -#define RTL8367C_ACT59_PRIORITY_MASK 0x400 -#define RTL8367C_ACT59_SVID_OFFSET 9 -#define RTL8367C_ACT59_SVID_MASK 0x200 -#define RTL8367C_ACT59_CVID_OFFSET 8 -#define RTL8367C_ACT59_CVID_MASK 0x100 -#define RTL8367C_OP58_NOT_OFFSET 6 -#define RTL8367C_OP58_NOT_MASK 0x40 -#define RTL8367C_ACT58_GPIO_OFFSET 5 -#define RTL8367C_ACT58_GPIO_MASK 0x20 -#define RTL8367C_ACT58_FORWARD_OFFSET 4 -#define RTL8367C_ACT58_FORWARD_MASK 0x10 -#define RTL8367C_ACT58_POLICING_OFFSET 3 -#define RTL8367C_ACT58_POLICING_MASK 0x8 -#define RTL8367C_ACT58_PRIORITY_OFFSET 2 -#define RTL8367C_ACT58_PRIORITY_MASK 0x4 -#define RTL8367C_ACT58_SVID_OFFSET 1 -#define RTL8367C_ACT58_SVID_MASK 0x2 -#define RTL8367C_ACT58_CVID_OFFSET 0 -#define RTL8367C_ACT58_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL30 0x0632 -#define RTL8367C_OP61_NOT_OFFSET 14 -#define RTL8367C_OP61_NOT_MASK 0x4000 -#define RTL8367C_ACT61_GPIO_OFFSET 13 -#define RTL8367C_ACT61_GPIO_MASK 0x2000 -#define RTL8367C_ACT61_FORWARD_OFFSET 12 -#define RTL8367C_ACT61_FORWARD_MASK 0x1000 -#define RTL8367C_ACT61_POLICING_OFFSET 11 -#define RTL8367C_ACT61_POLICING_MASK 0x800 -#define RTL8367C_ACT61_PRIORITY_OFFSET 10 -#define RTL8367C_ACT61_PRIORITY_MASK 0x400 -#define RTL8367C_ACT61_SVID_OFFSET 9 -#define RTL8367C_ACT61_SVID_MASK 0x200 -#define RTL8367C_ACT61_CVID_OFFSET 8 -#define RTL8367C_ACT61_CVID_MASK 0x100 -#define RTL8367C_OP60_NOT_OFFSET 6 -#define RTL8367C_OP60_NOT_MASK 0x40 -#define RTL8367C_ACT60_GPIO_OFFSET 5 -#define RTL8367C_ACT60_GPIO_MASK 0x20 -#define RTL8367C_ACT60_FORWARD_OFFSET 4 -#define RTL8367C_ACT60_FORWARD_MASK 0x10 -#define RTL8367C_ACT60_POLICING_OFFSET 3 -#define RTL8367C_ACT60_POLICING_MASK 0x8 -#define RTL8367C_ACT60_PRIORITY_OFFSET 2 -#define RTL8367C_ACT60_PRIORITY_MASK 0x4 -#define RTL8367C_ACT60_SVID_OFFSET 1 -#define RTL8367C_ACT60_SVID_MASK 0x2 -#define RTL8367C_ACT60_CVID_OFFSET 0 -#define RTL8367C_ACT60_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL31 0x0633 -#define RTL8367C_OP63_NOT_OFFSET 14 -#define RTL8367C_OP63_NOT_MASK 0x4000 -#define RTL8367C_ACT63_GPIO_OFFSET 13 -#define RTL8367C_ACT63_GPIO_MASK 0x2000 -#define RTL8367C_ACT63_FORWARD_OFFSET 12 -#define RTL8367C_ACT63_FORWARD_MASK 0x1000 -#define RTL8367C_ACT63_POLICING_OFFSET 11 -#define RTL8367C_ACT63_POLICING_MASK 0x800 -#define RTL8367C_ACT63_PRIORITY_OFFSET 10 -#define RTL8367C_ACT63_PRIORITY_MASK 0x400 -#define RTL8367C_ACT63_SVID_OFFSET 9 -#define RTL8367C_ACT63_SVID_MASK 0x200 -#define RTL8367C_ACT63_CVID_OFFSET 8 -#define RTL8367C_ACT63_CVID_MASK 0x100 -#define RTL8367C_OP62_NOT_OFFSET 6 -#define RTL8367C_OP62_NOT_MASK 0x40 -#define RTL8367C_ACT62_GPIO_OFFSET 5 -#define RTL8367C_ACT62_GPIO_MASK 0x20 -#define RTL8367C_ACT62_FORWARD_OFFSET 4 -#define RTL8367C_ACT62_FORWARD_MASK 0x10 -#define RTL8367C_ACT62_POLICING_OFFSET 3 -#define RTL8367C_ACT62_POLICING_MASK 0x8 -#define RTL8367C_ACT62_PRIORITY_OFFSET 2 -#define RTL8367C_ACT62_PRIORITY_MASK 0x4 -#define RTL8367C_ACT62_SVID_OFFSET 1 -#define RTL8367C_ACT62_SVID_MASK 0x2 -#define RTL8367C_ACT62_CVID_OFFSET 0 -#define RTL8367C_ACT62_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL0 0x0635 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL1 0x0636 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL2 0x0637 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY0_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY0_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY1_CTRL0 0x0638 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY1_CTRL1 0x0639 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY1_CTRL2 0x063a -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY1_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY1_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY2_CTRL0 0x063b - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY2_CTRL1 0x063c - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY2_CTRL2 0x063d -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY2_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY2_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY3_CTRL0 0x063e - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY3_CTRL1 0x063f - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY3_CTRL2 0x0640 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY3_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY3_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY4_CTRL0 0x0641 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY4_CTRL1 0x0642 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY4_CTRL2 0x0643 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY4_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY4_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY5_CTRL0 0x0644 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY5_CTRL1 0x0645 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY5_CTRL2 0x0646 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY5_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY5_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY6_CTRL0 0x0647 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY6_CTRL1 0x0648 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY6_CTRL2 0x0649 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY6_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY6_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY7_CTRL0 0x064a - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY7_CTRL1 0x064b - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY7_CTRL2 0x064c -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY7_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY7_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY8_CTRL0 0x064d - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY8_CTRL1 0x064e - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY8_CTRL2 0x064f -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY8_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY8_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY9_CTRL0 0x0650 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY9_CTRL1 0x0651 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY9_CTRL2 0x0652 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY9_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY9_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY10_CTRL0 0x0653 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY10_CTRL1 0x0654 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY10_CTRL2 0x0655 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY10_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY10_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY11_CTRL0 0x0656 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY11_CTRL1 0x0657 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY11_CTRL2 0x0658 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY11_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY11_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY12_CTRL0 0x0659 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY12_CTRL1 0x065a - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY12_CTRL2 0x065b -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY12_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY12_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY13_CTRL0 0x065c - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY13_CTRL1 0x065d - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY13_CTRL2 0x065e -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY13_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY13_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY14_CTRL0 0x065f - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY14_CTRL1 0x0660 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY14_CTRL2 0x0661 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY14_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY14_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY15_CTRL0 0x0662 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY15_CTRL1 0x0663 - -#define RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY15_CTRL2 0x0664 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY15_CTRL2_OFFSET 0 -#define RTL8367C_ACL_SDPORT_RANGE_ENTRY15_CTRL2_MASK 0x3 - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY0_CTRL0 0x0665 -#define RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY0_CTRL1 0x0666 -#define RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY1_CTRL0 0x0667 -#define RTL8367C_ACL_VID_RANGE_ENTRY1_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY1_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY1_CTRL1 0x0668 -#define RTL8367C_ACL_VID_RANGE_ENTRY1_CTRL1_CHECK1_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY1_CTRL1_CHECK1_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY1_CTRL1_CHECK1_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY1_CTRL1_CHECK1_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY2_CTRL0 0x0669 -#define RTL8367C_ACL_VID_RANGE_ENTRY2_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY2_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY2_CTRL1 0x066a -#define RTL8367C_ACL_VID_RANGE_ENTRY2_CTRL1_CHECK2_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY2_CTRL1_CHECK2_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY2_CTRL1_CHECK2_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY2_CTRL1_CHECK2_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY3_CTRL0 0x066b -#define RTL8367C_ACL_VID_RANGE_ENTRY3_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY3_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY3_CTRL1 0x066c -#define RTL8367C_ACL_VID_RANGE_ENTRY3_CTRL1_CHECK3_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY3_CTRL1_CHECK3_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY3_CTRL1_CHECK3_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY3_CTRL1_CHECK3_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY4_CTRL0 0x066d -#define RTL8367C_ACL_VID_RANGE_ENTRY4_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY4_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY4_CTRL1 0x066e -#define RTL8367C_ACL_VID_RANGE_ENTRY4_CTRL1_CHECK4_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY4_CTRL1_CHECK4_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY4_CTRL1_CHECK4_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY4_CTRL1_CHECK4_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY5_CTRL0 0x066f -#define RTL8367C_ACL_VID_RANGE_ENTRY5_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY5_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY5_CTRL1 0x0670 -#define RTL8367C_ACL_VID_RANGE_ENTRY5_CTRL1_CHECK5_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY5_CTRL1_CHECK5_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY5_CTRL1_CHECK5_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY5_CTRL1_CHECK5_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY6_CTRL0 0x0671 -#define RTL8367C_ACL_VID_RANGE_ENTRY6_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY6_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY6_CTRL1 0x0672 -#define RTL8367C_ACL_VID_RANGE_ENTRY6_CTRL1_CHECK6_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY6_CTRL1_CHECK6_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY6_CTRL1_CHECK6_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY6_CTRL1_CHECK6_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY7_CTRL0 0x0673 -#define RTL8367C_ACL_VID_RANGE_ENTRY7_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY7_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY7_CTRL1 0x0674 -#define RTL8367C_ACL_VID_RANGE_ENTRY7_CTRL1_CHECK7_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY7_CTRL1_CHECK7_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY7_CTRL1_CHECK7_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY7_CTRL1_CHECK7_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY8_CTRL0 0x0675 -#define RTL8367C_ACL_VID_RANGE_ENTRY8_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY8_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY8_CTRL1 0x0676 -#define RTL8367C_ACL_VID_RANGE_ENTRY8_CTRL1_CHECK8_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY8_CTRL1_CHECK8_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY8_CTRL1_CHECK8_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY8_CTRL1_CHECK8_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY9_CTRL0 0x0677 -#define RTL8367C_ACL_VID_RANGE_ENTRY9_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY9_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY9_CTRL1 0x0678 -#define RTL8367C_ACL_VID_RANGE_ENTRY9_CTRL1_CHECK9_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY9_CTRL1_CHECK9_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY9_CTRL1_CHECK9_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY9_CTRL1_CHECK9_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY10_CTRL0 0x0679 -#define RTL8367C_ACL_VID_RANGE_ENTRY10_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY10_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY10_CTRL1 0x067a -#define RTL8367C_ACL_VID_RANGE_ENTRY10_CTRL1_CHECK10_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY10_CTRL1_CHECK10_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY10_CTRL1_CHECK10_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY10_CTRL1_CHECK10_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY11_CTRL0 0x067b -#define RTL8367C_ACL_VID_RANGE_ENTRY11_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY11_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY11_CTRL1 0x067c -#define RTL8367C_ACL_VID_RANGE_ENTRY11_CTRL1_CHECK11_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY11_CTRL1_CHECK11_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY11_CTRL1_CHECK11_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY11_CTRL1_CHECK11_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY12_CTRL0 0x067d -#define RTL8367C_ACL_VID_RANGE_ENTRY12_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY12_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY12_CTRL1 0x067e -#define RTL8367C_ACL_VID_RANGE_ENTRY12_CTRL1_CHECK12_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY12_CTRL1_CHECK12_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY12_CTRL1_CHECK12_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY12_CTRL1_CHECK12_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY13_CTRL0 0x067f -#define RTL8367C_ACL_VID_RANGE_ENTRY13_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY13_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY13_CTRL1 0x0680 -#define RTL8367C_ACL_VID_RANGE_ENTRY13_CTRL1_CHECK13_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY13_CTRL1_CHECK13_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY13_CTRL1_CHECK13_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY13_CTRL1_CHECK13_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY14_CTRL0 0x0681 -#define RTL8367C_ACL_VID_RANGE_ENTRY14_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY14_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY14_CTRL1 0x0682 -#define RTL8367C_ACL_VID_RANGE_ENTRY14_CTRL1_CHECK14_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY14_CTRL1_CHECK14_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY14_CTRL1_CHECK14_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY14_CTRL1_CHECK14_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY15_CTRL0 0x0683 -#define RTL8367C_ACL_VID_RANGE_ENTRY15_CTRL0_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY15_CTRL0_MASK 0xFFF - -#define RTL8367C_REG_ACL_VID_RANGE_ENTRY15_CTRL1 0x0684 -#define RTL8367C_ACL_VID_RANGE_ENTRY15_CTRL1_CHECK15_TYPE_OFFSET 12 -#define RTL8367C_ACL_VID_RANGE_ENTRY15_CTRL1_CHECK15_TYPE_MASK 0x3000 -#define RTL8367C_ACL_VID_RANGE_ENTRY15_CTRL1_CHECK15_HIGH_OFFSET 0 -#define RTL8367C_ACL_VID_RANGE_ENTRY15_CTRL1_CHECK15_HIGH_MASK 0xFFF - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL0 0x0685 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL1 0x0686 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL2 0x0687 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL3 0x0688 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL4 0x0689 -#define RTL8367C_ACL_IP_RANGE_ENTRY0_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY0_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY1_CTRL0 0x068a - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY1_CTRL1 0x068b - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY1_CTRL2 0x068c - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY1_CTRL3 0x068d - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY1_CTRL4 0x068e -#define RTL8367C_ACL_IP_RANGE_ENTRY1_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY1_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY2_CTRL0 0x068f - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY2_CTRL1 0x0690 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY2_CTRL2 0x0691 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY2_CTRL3 0x0692 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY2_CTRL4 0x0693 -#define RTL8367C_ACL_IP_RANGE_ENTRY2_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY2_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY3_CTRL0 0x0694 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY3_CTRL1 0x0695 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY3_CTRL2 0x0696 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY3_CTRL3 0x0697 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY3_CTRL4 0x0698 -#define RTL8367C_ACL_IP_RANGE_ENTRY3_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY3_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY4_CTRL0 0x0699 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY4_CTRL1 0x069a - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY4_CTRL2 0x069b - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY4_CTRL3 0x069c - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY4_CTRL4 0x069d -#define RTL8367C_ACL_IP_RANGE_ENTRY4_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY4_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY5_CTRL0 0x069e - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY5_CTRL1 0x069f - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY5_CTRL2 0x06a0 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY5_CTRL3 0x06a1 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY5_CTRL4 0x06a2 -#define RTL8367C_ACL_IP_RANGE_ENTRY5_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY5_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY6_CTRL0 0x06a3 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY6_CTRL1 0x06a4 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY6_CTRL2 0x06a5 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY6_CTRL3 0x06a6 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY6_CTRL4 0x06a7 -#define RTL8367C_ACL_IP_RANGE_ENTRY6_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY6_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY7_CTRL0 0x06a8 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY7_CTRL1 0x06a9 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY7_CTRL2 0x06aa - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY7_CTRL3 0x06ab - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY7_CTRL4 0x06ac -#define RTL8367C_ACL_IP_RANGE_ENTRY7_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY7_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY8_CTRL0 0x06ad - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY8_CTRL1 0x06ae - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY8_CTRL2 0x06af - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY8_CTRL3 0x06b0 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY8_CTRL4 0x06b1 -#define RTL8367C_ACL_IP_RANGE_ENTRY8_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY8_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY9_CTRL0 0x06b2 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY9_CTRL1 0x06b3 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY9_CTRL2 0x06b4 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY9_CTRL3 0x06b5 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY9_CTRL4 0x06b6 -#define RTL8367C_ACL_IP_RANGE_ENTRY9_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY9_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY10_CTRL0 0x06b7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY10_CTRL1 0x06b8 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY10_CTRL2 0x06b9 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY10_CTRL3 0x06ba - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY10_CTRL4 0x06bb -#define RTL8367C_ACL_IP_RANGE_ENTRY10_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY10_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY11_CTRL0 0x06bc - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY11_CTRL1 0x06bd - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY11_CTRL2 0x06be - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY11_CTRL3 0x06bf - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY11_CTRL4 0x06c0 -#define RTL8367C_ACL_IP_RANGE_ENTRY11_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY11_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY12_CTRL0 0x06c1 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY12_CTRL1 0x06c2 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY12_CTRL2 0x06c3 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY12_CTRL3 0x06c4 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY12_CTRL4 0x06c5 -#define RTL8367C_ACL_IP_RANGE_ENTRY12_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY12_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY13_CTRL0 0x06c6 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY13_CTRL1 0x06c7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY13_CTRL2 0x06c8 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY13_CTRL3 0x06c9 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY13_CTRL4 0x06ca -#define RTL8367C_ACL_IP_RANGE_ENTRY13_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY13_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY14_CTRL0 0x06cb - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY14_CTRL1 0x06cc - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY14_CTRL2 0x06cd - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY14_CTRL3 0x06ce - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY14_CTRL4 0x06cf -#define RTL8367C_ACL_IP_RANGE_ENTRY14_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY14_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY15_CTRL0 0x06d0 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY15_CTRL1 0x06d1 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY15_CTRL2 0x06d2 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY15_CTRL3 0x06d3 - -#define RTL8367C_REG_ACL_IP_RANGE_ENTRY15_CTRL4 0x06d4 -#define RTL8367C_ACL_IP_RANGE_ENTRY15_CTRL4_OFFSET 0 -#define RTL8367C_ACL_IP_RANGE_ENTRY15_CTRL4_MASK 0x7 - -#define RTL8367C_REG_ACL_ENABLE 0x06d5 -#define RTL8367C_PORT10_ENABLE_OFFSET 10 -#define RTL8367C_PORT10_ENABLE_MASK 0x400 -#define RTL8367C_PORT9_ENABLE_OFFSET 9 -#define RTL8367C_PORT9_ENABLE_MASK 0x200 -#define RTL8367C_PORT8_ENABLE_OFFSET 8 -#define RTL8367C_PORT8_ENABLE_MASK 0x100 -#define RTL8367C_PORT7_ENABLE_OFFSET 7 -#define RTL8367C_PORT7_ENABLE_MASK 0x80 -#define RTL8367C_PORT6_ENABLE_OFFSET 6 -#define RTL8367C_PORT6_ENABLE_MASK 0x40 -#define RTL8367C_PORT5_ENABLE_OFFSET 5 -#define RTL8367C_PORT5_ENABLE_MASK 0x20 -#define RTL8367C_PORT4_ENABLE_OFFSET 4 -#define RTL8367C_PORT4_ENABLE_MASK 0x10 -#define RTL8367C_PORT3_ENABLE_OFFSET 3 -#define RTL8367C_PORT3_ENABLE_MASK 0x8 -#define RTL8367C_PORT2_ENABLE_OFFSET 2 -#define RTL8367C_PORT2_ENABLE_MASK 0x4 -#define RTL8367C_PORT1_ENABLE_OFFSET 1 -#define RTL8367C_PORT1_ENABLE_MASK 0x2 -#define RTL8367C_PORT0_ENABLE_OFFSET 0 -#define RTL8367C_PORT0_ENABLE_MASK 0x1 - -#define RTL8367C_REG_ACL_UNMATCH_PERMIT 0x06d6 -#define RTL8367C_PORT10_PERMIT_OFFSET 10 -#define RTL8367C_PORT10_PERMIT_MASK 0x400 -#define RTL8367C_PORT9_PERMIT_OFFSET 9 -#define RTL8367C_PORT9_PERMIT_MASK 0x200 -#define RTL8367C_PORT8_PERMIT_OFFSET 8 -#define RTL8367C_PORT8_PERMIT_MASK 0x100 -#define RTL8367C_PORT7_PERMIT_OFFSET 7 -#define RTL8367C_PORT7_PERMIT_MASK 0x80 -#define RTL8367C_PORT6_PERMIT_OFFSET 6 -#define RTL8367C_PORT6_PERMIT_MASK 0x40 -#define RTL8367C_PORT5_PERMIT_OFFSET 5 -#define RTL8367C_PORT5_PERMIT_MASK 0x20 -#define RTL8367C_PORT4_PERMIT_OFFSET 4 -#define RTL8367C_PORT4_PERMIT_MASK 0x10 -#define RTL8367C_PORT3_PERMIT_OFFSET 3 -#define RTL8367C_PORT3_PERMIT_MASK 0x8 -#define RTL8367C_PORT2_PERMIT_OFFSET 2 -#define RTL8367C_PORT2_PERMIT_MASK 0x4 -#define RTL8367C_PORT1_PERMIT_OFFSET 1 -#define RTL8367C_PORT1_PERMIT_MASK 0x2 -#define RTL8367C_PORT0_PERMIT_OFFSET 0 -#define RTL8367C_PORT0_PERMIT_MASK 0x1 - -#define RTL8367C_REG_ACL_GPIO_POLARITY 0x06d7 -#define RTL8367C_ACL_GPIO_POLARITY_OFFSET 0 -#define RTL8367C_ACL_GPIO_POLARITY_MASK 0x1 - -#define RTL8367C_REG_ACL_LOG_CNT_TYPE 0x06d8 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER15_TYPE_OFFSET 15 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER15_TYPE_MASK 0x8000 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER14_TYPE_OFFSET 14 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER14_TYPE_MASK 0x4000 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER13_TYPE_OFFSET 13 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER13_TYPE_MASK 0x2000 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER12_TYPE_OFFSET 12 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER12_TYPE_MASK 0x1000 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER11_TYPE_OFFSET 11 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER11_TYPE_MASK 0x800 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER10_TYPE_OFFSET 10 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER10_TYPE_MASK 0x400 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER9_TYPE_OFFSET 9 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER9_TYPE_MASK 0x200 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER8_TYPE_OFFSET 8 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER8_TYPE_MASK 0x100 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER7_TYPE_OFFSET 7 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER7_TYPE_MASK 0x80 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER6_TYPE_OFFSET 6 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER6_TYPE_MASK 0x40 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER5_TYPE_OFFSET 5 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER5_TYPE_MASK 0x20 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER4_TYPE_OFFSET 4 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER4_TYPE_MASK 0x10 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER3_TYPE_OFFSET 3 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER3_TYPE_MASK 0x8 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER2_TYPE_OFFSET 2 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER2_TYPE_MASK 0x4 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER1_TYPE_OFFSET 1 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER1_TYPE_MASK 0x2 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER0_TYPE_OFFSET 0 -#define RTL8367C_ACL_LOG_CNT_TYPE_COUNTER0_TYPE_MASK 0x1 - -#define RTL8367C_REG_ACL_RESET_CFG 0x06d9 -#define RTL8367C_ACL_RESET_CFG_OFFSET 0 -#define RTL8367C_ACL_RESET_CFG_MASK 0x1 - -#define RTL8367C_REG_ACL_DUMMY00 0x06E0 - -#define RTL8367C_REG_ACL_DUMMY01 0x06E1 - -#define RTL8367C_REG_ACL_DUMMY02 0x06E2 - -#define RTL8367C_REG_ACL_DUMMY03 0x06E3 - -#define RTL8367C_REG_ACL_DUMMY04 0x06E4 - -#define RTL8367C_REG_ACL_DUMMY05 0x06E5 - -#define RTL8367C_REG_ACL_DUMMY06 0x06E6 - -#define RTL8367C_REG_ACL_DUMMY07 0x06E7 - -#define RTL8367C_REG_ACL_REASON_01 0x06E8 -#define RTL8367C_ACL_ACT_1_OFFSET 8 -#define RTL8367C_ACL_ACT_1_MASK 0xFF00 -#define RTL8367C_ACL_ACT_0_OFFSET 0 -#define RTL8367C_ACL_ACT_0_MASK 0xFF - -#define RTL8367C_REG_ACL_REASON_23 0x06E9 -#define RTL8367C_ACL_ACT_3_OFFSET 8 -#define RTL8367C_ACL_ACT_3_MASK 0xFF00 -#define RTL8367C_ACL_ACT_2_OFFSET 0 -#define RTL8367C_ACL_ACT_2_MASK 0xFF - -#define RTL8367C_REG_ACL_REASON_45 0x06EA -#define RTL8367C_ACL_ACT_5_OFFSET 8 -#define RTL8367C_ACL_ACT_5_MASK 0xFF00 -#define RTL8367C_ACL_ACT_4_OFFSET 0 -#define RTL8367C_ACL_ACT_4_MASK 0xFF - -#define RTL8367C_REG_ACL_ACCESS_MODE 0x06EB -#define RTL8367C_ACL_ACCESS_MODE_OFFSET 0 -#define RTL8367C_ACL_ACCESS_MODE_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL32 0x06F0 -#define RTL8367C_OP65_NOT_OFFSET 14 -#define RTL8367C_OP65_NOT_MASK 0x4000 -#define RTL8367C_ACT65_GPIO_OFFSET 13 -#define RTL8367C_ACT65_GPIO_MASK 0x2000 -#define RTL8367C_ACT65_FORWARD_OFFSET 12 -#define RTL8367C_ACT65_FORWARD_MASK 0x1000 -#define RTL8367C_ACT65_POLICING_OFFSET 11 -#define RTL8367C_ACT65_POLICING_MASK 0x800 -#define RTL8367C_ACT65_PRIORITY_OFFSET 10 -#define RTL8367C_ACT65_PRIORITY_MASK 0x400 -#define RTL8367C_ACT65_SVID_OFFSET 9 -#define RTL8367C_ACT65_SVID_MASK 0x200 -#define RTL8367C_ACT65_CVID_OFFSET 8 -#define RTL8367C_ACT65_CVID_MASK 0x100 -#define RTL8367C_OP64_NOT_OFFSET 6 -#define RTL8367C_OP64_NOT_MASK 0x40 -#define RTL8367C_ACT64_GPIO_OFFSET 5 -#define RTL8367C_ACT64_GPIO_MASK 0x20 -#define RTL8367C_ACT64_FORWARD_OFFSET 4 -#define RTL8367C_ACT64_FORWARD_MASK 0x10 -#define RTL8367C_ACT64_POLICING_OFFSET 3 -#define RTL8367C_ACT64_POLICING_MASK 0x8 -#define RTL8367C_ACT64_PRIORITY_OFFSET 2 -#define RTL8367C_ACT64_PRIORITY_MASK 0x4 -#define RTL8367C_ACT64_SVID_OFFSET 1 -#define RTL8367C_ACT64_SVID_MASK 0x2 -#define RTL8367C_ACT64_CVID_OFFSET 0 -#define RTL8367C_ACT64_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL33 0x06F1 -#define RTL8367C_OP67_NOT_OFFSET 14 -#define RTL8367C_OP67_NOT_MASK 0x4000 -#define RTL8367C_ACT67_GPIO_OFFSET 13 -#define RTL8367C_ACT67_GPIO_MASK 0x2000 -#define RTL8367C_ACT67_FORWARD_OFFSET 12 -#define RTL8367C_ACT67_FORWARD_MASK 0x1000 -#define RTL8367C_ACT67_POLICING_OFFSET 11 -#define RTL8367C_ACT67_POLICING_MASK 0x800 -#define RTL8367C_ACT67_PRIORITY_OFFSET 10 -#define RTL8367C_ACT67_PRIORITY_MASK 0x400 -#define RTL8367C_ACT67_SVID_OFFSET 9 -#define RTL8367C_ACT67_SVID_MASK 0x200 -#define RTL8367C_ACT67_CVID_OFFSET 8 -#define RTL8367C_ACT67_CVID_MASK 0x100 -#define RTL8367C_OP66_NOT_OFFSET 6 -#define RTL8367C_OP66_NOT_MASK 0x40 -#define RTL8367C_ACT66_GPIO_OFFSET 5 -#define RTL8367C_ACT66_GPIO_MASK 0x20 -#define RTL8367C_ACT66_FORWARD_OFFSET 4 -#define RTL8367C_ACT66_FORWARD_MASK 0x10 -#define RTL8367C_ACT66_POLICING_OFFSET 3 -#define RTL8367C_ACT66_POLICING_MASK 0x8 -#define RTL8367C_ACT66_PRIORITY_OFFSET 2 -#define RTL8367C_ACT66_PRIORITY_MASK 0x4 -#define RTL8367C_ACT66_SVID_OFFSET 1 -#define RTL8367C_ACT66_SVID_MASK 0x2 -#define RTL8367C_ACT66_CVID_OFFSET 0 -#define RTL8367C_ACT66_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL34 0x06F2 -#define RTL8367C_OP69_NOT_OFFSET 14 -#define RTL8367C_OP69_NOT_MASK 0x4000 -#define RTL8367C_ACT69_GPIO_OFFSET 13 -#define RTL8367C_ACT69_GPIO_MASK 0x2000 -#define RTL8367C_ACT69_FORWARD_OFFSET 12 -#define RTL8367C_ACT69_FORWARD_MASK 0x1000 -#define RTL8367C_ACT69_POLICING_OFFSET 11 -#define RTL8367C_ACT69_POLICING_MASK 0x800 -#define RTL8367C_ACT69_PRIORITY_OFFSET 10 -#define RTL8367C_ACT69_PRIORITY_MASK 0x400 -#define RTL8367C_ACT69_SVID_OFFSET 9 -#define RTL8367C_ACT69_SVID_MASK 0x200 -#define RTL8367C_ACT69_CVID_OFFSET 8 -#define RTL8367C_ACT69_CVID_MASK 0x100 -#define RTL8367C_OP68_NOT_OFFSET 6 -#define RTL8367C_OP68_NOT_MASK 0x40 -#define RTL8367C_ACT68_GPIO_OFFSET 5 -#define RTL8367C_ACT68_GPIO_MASK 0x20 -#define RTL8367C_ACT68_FORWARD_OFFSET 4 -#define RTL8367C_ACT68_FORWARD_MASK 0x10 -#define RTL8367C_ACT68_POLICING_OFFSET 3 -#define RTL8367C_ACT68_POLICING_MASK 0x8 -#define RTL8367C_ACT68_PRIORITY_OFFSET 2 -#define RTL8367C_ACT68_PRIORITY_MASK 0x4 -#define RTL8367C_ACT68_SVID_OFFSET 1 -#define RTL8367C_ACT68_SVID_MASK 0x2 -#define RTL8367C_ACT68_CVID_OFFSET 0 -#define RTL8367C_ACT68_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL35 0x06F3 -#define RTL8367C_OP71_NOT_OFFSET 14 -#define RTL8367C_OP71_NOT_MASK 0x4000 -#define RTL8367C_ACT71_GPIO_OFFSET 13 -#define RTL8367C_ACT71_GPIO_MASK 0x2000 -#define RTL8367C_ACT71_FORWARD_OFFSET 12 -#define RTL8367C_ACT71_FORWARD_MASK 0x1000 -#define RTL8367C_ACT71_POLICING_OFFSET 11 -#define RTL8367C_ACT71_POLICING_MASK 0x800 -#define RTL8367C_ACT71_PRIORITY_OFFSET 10 -#define RTL8367C_ACT71_PRIORITY_MASK 0x400 -#define RTL8367C_ACT71_SVID_OFFSET 9 -#define RTL8367C_ACT71_SVID_MASK 0x200 -#define RTL8367C_ACT71_CVID_OFFSET 8 -#define RTL8367C_ACT71_CVID_MASK 0x100 -#define RTL8367C_OP70_NOT_OFFSET 6 -#define RTL8367C_OP70_NOT_MASK 0x40 -#define RTL8367C_ACT70_GPIO_OFFSET 5 -#define RTL8367C_ACT70_GPIO_MASK 0x20 -#define RTL8367C_ACT70_FORWARD_OFFSET 4 -#define RTL8367C_ACT70_FORWARD_MASK 0x10 -#define RTL8367C_ACT70_POLICING_OFFSET 3 -#define RTL8367C_ACT70_POLICING_MASK 0x8 -#define RTL8367C_ACT70_PRIORITY_OFFSET 2 -#define RTL8367C_ACT70_PRIORITY_MASK 0x4 -#define RTL8367C_ACT70_SVID_OFFSET 1 -#define RTL8367C_ACT70_SVID_MASK 0x2 -#define RTL8367C_ACT70_CVID_OFFSET 0 -#define RTL8367C_ACT70_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL36 0x06F4 -#define RTL8367C_OP73_NOT_OFFSET 14 -#define RTL8367C_OP73_NOT_MASK 0x4000 -#define RTL8367C_ACT73_GPIO_OFFSET 13 -#define RTL8367C_ACT73_GPIO_MASK 0x2000 -#define RTL8367C_ACT73_FORWARD_OFFSET 12 -#define RTL8367C_ACT73_FORWARD_MASK 0x1000 -#define RTL8367C_ACT73_POLICING_OFFSET 11 -#define RTL8367C_ACT73_POLICING_MASK 0x800 -#define RTL8367C_ACT73_PRIORITY_OFFSET 10 -#define RTL8367C_ACT73_PRIORITY_MASK 0x400 -#define RTL8367C_ACT73_SVID_OFFSET 9 -#define RTL8367C_ACT73_SVID_MASK 0x200 -#define RTL8367C_ACT73_CVID_OFFSET 8 -#define RTL8367C_ACT73_CVID_MASK 0x100 -#define RTL8367C_OP72_NOT_OFFSET 6 -#define RTL8367C_OP72_NOT_MASK 0x40 -#define RTL8367C_ACT72_GPIO_OFFSET 5 -#define RTL8367C_ACT72_GPIO_MASK 0x20 -#define RTL8367C_ACT72_FORWARD_OFFSET 4 -#define RTL8367C_ACT72_FORWARD_MASK 0x10 -#define RTL8367C_ACT72_POLICING_OFFSET 3 -#define RTL8367C_ACT72_POLICING_MASK 0x8 -#define RTL8367C_ACT72_PRIORITY_OFFSET 2 -#define RTL8367C_ACT72_PRIORITY_MASK 0x4 -#define RTL8367C_ACT72_SVID_OFFSET 1 -#define RTL8367C_ACT72_SVID_MASK 0x2 -#define RTL8367C_ACT72_CVID_OFFSET 0 -#define RTL8367C_ACT72_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL37 0x06F5 -#define RTL8367C_OP75_NOT_OFFSET 14 -#define RTL8367C_OP75_NOT_MASK 0x4000 -#define RTL8367C_ACT75_GPIO_OFFSET 13 -#define RTL8367C_ACT75_GPIO_MASK 0x2000 -#define RTL8367C_ACT75_FORWARD_OFFSET 12 -#define RTL8367C_ACT75_FORWARD_MASK 0x1000 -#define RTL8367C_ACT75_POLICING_OFFSET 11 -#define RTL8367C_ACT75_POLICING_MASK 0x800 -#define RTL8367C_ACT75_PRIORITY_OFFSET 10 -#define RTL8367C_ACT75_PRIORITY_MASK 0x400 -#define RTL8367C_ACT75_SVID_OFFSET 9 -#define RTL8367C_ACT75_SVID_MASK 0x200 -#define RTL8367C_ACT75_CVID_OFFSET 8 -#define RTL8367C_ACT75_CVID_MASK 0x100 -#define RTL8367C_OP74_NOT_OFFSET 6 -#define RTL8367C_OP74_NOT_MASK 0x40 -#define RTL8367C_ACT74_GPIO_OFFSET 5 -#define RTL8367C_ACT74_GPIO_MASK 0x20 -#define RTL8367C_ACT74_FORWARD_OFFSET 4 -#define RTL8367C_ACT74_FORWARD_MASK 0x10 -#define RTL8367C_ACT74_POLICING_OFFSET 3 -#define RTL8367C_ACT74_POLICING_MASK 0x8 -#define RTL8367C_ACT74_PRIORITY_OFFSET 2 -#define RTL8367C_ACT74_PRIORITY_MASK 0x4 -#define RTL8367C_ACT74_SVID_OFFSET 1 -#define RTL8367C_ACT74_SVID_MASK 0x2 -#define RTL8367C_ACT74_CVID_OFFSET 0 -#define RTL8367C_ACT74_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL38 0x06F6 -#define RTL8367C_OP77_NOT_OFFSET 14 -#define RTL8367C_OP77_NOT_MASK 0x4000 -#define RTL8367C_ACT77_GPIO_OFFSET 13 -#define RTL8367C_ACT77_GPIO_MASK 0x2000 -#define RTL8367C_ACT77_FORWARD_OFFSET 12 -#define RTL8367C_ACT77_FORWARD_MASK 0x1000 -#define RTL8367C_ACT77_POLICING_OFFSET 11 -#define RTL8367C_ACT77_POLICING_MASK 0x800 -#define RTL8367C_ACT77_PRIORITY_OFFSET 10 -#define RTL8367C_ACT77_PRIORITY_MASK 0x400 -#define RTL8367C_ACT77_SVID_OFFSET 9 -#define RTL8367C_ACT77_SVID_MASK 0x200 -#define RTL8367C_ACT77_CVID_OFFSET 8 -#define RTL8367C_ACT77_CVID_MASK 0x100 -#define RTL8367C_OP76_NOT_OFFSET 6 -#define RTL8367C_OP76_NOT_MASK 0x40 -#define RTL8367C_ACT76_GPIO_OFFSET 5 -#define RTL8367C_ACT76_GPIO_MASK 0x20 -#define RTL8367C_ACT76_FORWARD_OFFSET 4 -#define RTL8367C_ACT76_FORWARD_MASK 0x10 -#define RTL8367C_ACT76_POLICING_OFFSET 3 -#define RTL8367C_ACT76_POLICING_MASK 0x8 -#define RTL8367C_ACT76_PRIORITY_OFFSET 2 -#define RTL8367C_ACT76_PRIORITY_MASK 0x4 -#define RTL8367C_ACT76_SVID_OFFSET 1 -#define RTL8367C_ACT76_SVID_MASK 0x2 -#define RTL8367C_ACT76_CVID_OFFSET 0 -#define RTL8367C_ACT76_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL39 0x06F7 -#define RTL8367C_OP79_NOT_OFFSET 14 -#define RTL8367C_OP79_NOT_MASK 0x4000 -#define RTL8367C_ACT79_GPIO_OFFSET 13 -#define RTL8367C_ACT79_GPIO_MASK 0x2000 -#define RTL8367C_ACT79_FORWARD_OFFSET 12 -#define RTL8367C_ACT79_FORWARD_MASK 0x1000 -#define RTL8367C_ACT79_POLICING_OFFSET 11 -#define RTL8367C_ACT79_POLICING_MASK 0x800 -#define RTL8367C_ACT79_PRIORITY_OFFSET 10 -#define RTL8367C_ACT79_PRIORITY_MASK 0x400 -#define RTL8367C_ACT79_SVID_OFFSET 9 -#define RTL8367C_ACT79_SVID_MASK 0x200 -#define RTL8367C_ACT79_CVID_OFFSET 8 -#define RTL8367C_ACT79_CVID_MASK 0x100 -#define RTL8367C_OP78_NOT_OFFSET 6 -#define RTL8367C_OP78_NOT_MASK 0x40 -#define RTL8367C_ACT78_GPIO_OFFSET 5 -#define RTL8367C_ACT78_GPIO_MASK 0x20 -#define RTL8367C_ACT78_FORWARD_OFFSET 4 -#define RTL8367C_ACT78_FORWARD_MASK 0x10 -#define RTL8367C_ACT78_POLICING_OFFSET 3 -#define RTL8367C_ACT78_POLICING_MASK 0x8 -#define RTL8367C_ACT78_PRIORITY_OFFSET 2 -#define RTL8367C_ACT78_PRIORITY_MASK 0x4 -#define RTL8367C_ACT78_SVID_OFFSET 1 -#define RTL8367C_ACT78_SVID_MASK 0x2 -#define RTL8367C_ACT78_CVID_OFFSET 0 -#define RTL8367C_ACT78_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL40 0x06F8 -#define RTL8367C_OP81_NOT_OFFSET 14 -#define RTL8367C_OP81_NOT_MASK 0x4000 -#define RTL8367C_ACT81_GPIO_OFFSET 13 -#define RTL8367C_ACT81_GPIO_MASK 0x2000 -#define RTL8367C_ACT81_FORWARD_OFFSET 12 -#define RTL8367C_ACT81_FORWARD_MASK 0x1000 -#define RTL8367C_ACT81_POLICING_OFFSET 11 -#define RTL8367C_ACT81_POLICING_MASK 0x800 -#define RTL8367C_ACT81_PRIORITY_OFFSET 10 -#define RTL8367C_ACT81_PRIORITY_MASK 0x400 -#define RTL8367C_ACT81_SVID_OFFSET 9 -#define RTL8367C_ACT81_SVID_MASK 0x200 -#define RTL8367C_ACT81_CVID_OFFSET 8 -#define RTL8367C_ACT81_CVID_MASK 0x100 -#define RTL8367C_OP80_NOT_OFFSET 6 -#define RTL8367C_OP80_NOT_MASK 0x40 -#define RTL8367C_ACT80_GPIO_OFFSET 5 -#define RTL8367C_ACT80_GPIO_MASK 0x20 -#define RTL8367C_ACT80_FORWARD_OFFSET 4 -#define RTL8367C_ACT80_FORWARD_MASK 0x10 -#define RTL8367C_ACT80_POLICING_OFFSET 3 -#define RTL8367C_ACT80_POLICING_MASK 0x8 -#define RTL8367C_ACT80_PRIORITY_OFFSET 2 -#define RTL8367C_ACT80_PRIORITY_MASK 0x4 -#define RTL8367C_ACT80_SVID_OFFSET 1 -#define RTL8367C_ACT80_SVID_MASK 0x2 -#define RTL8367C_ACT80_CVID_OFFSET 0 -#define RTL8367C_ACT80_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL41 0x06F9 -#define RTL8367C_OP83_NOT_OFFSET 14 -#define RTL8367C_OP83_NOT_MASK 0x4000 -#define RTL8367C_ACT83_GPIO_OFFSET 13 -#define RTL8367C_ACT83_GPIO_MASK 0x2000 -#define RTL8367C_ACT83_FORWARD_OFFSET 12 -#define RTL8367C_ACT83_FORWARD_MASK 0x1000 -#define RTL8367C_ACT83_POLICING_OFFSET 11 -#define RTL8367C_ACT83_POLICING_MASK 0x800 -#define RTL8367C_ACT83_PRIORITY_OFFSET 10 -#define RTL8367C_ACT83_PRIORITY_MASK 0x400 -#define RTL8367C_ACT83_SVID_OFFSET 9 -#define RTL8367C_ACT83_SVID_MASK 0x200 -#define RTL8367C_ACT83_CVID_OFFSET 8 -#define RTL8367C_ACT83_CVID_MASK 0x100 -#define RTL8367C_OP82_NOT_OFFSET 6 -#define RTL8367C_OP82_NOT_MASK 0x40 -#define RTL8367C_ACT82_GPIO_OFFSET 5 -#define RTL8367C_ACT82_GPIO_MASK 0x20 -#define RTL8367C_ACT82_FORWARD_OFFSET 4 -#define RTL8367C_ACT82_FORWARD_MASK 0x10 -#define RTL8367C_ACT82_POLICING_OFFSET 3 -#define RTL8367C_ACT82_POLICING_MASK 0x8 -#define RTL8367C_ACT82_PRIORITY_OFFSET 2 -#define RTL8367C_ACT82_PRIORITY_MASK 0x4 -#define RTL8367C_ACT82_SVID_OFFSET 1 -#define RTL8367C_ACT82_SVID_MASK 0x2 -#define RTL8367C_ACT82_CVID_OFFSET 0 -#define RTL8367C_ACT82_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL42 0x06FA -#define RTL8367C_OP85_NOT_OFFSET 14 -#define RTL8367C_OP85_NOT_MASK 0x4000 -#define RTL8367C_ACT85_GPIO_OFFSET 13 -#define RTL8367C_ACT85_GPIO_MASK 0x2000 -#define RTL8367C_ACT85_FORWARD_OFFSET 12 -#define RTL8367C_ACT85_FORWARD_MASK 0x1000 -#define RTL8367C_ACT85_POLICING_OFFSET 11 -#define RTL8367C_ACT85_POLICING_MASK 0x800 -#define RTL8367C_ACT85_PRIORITY_OFFSET 10 -#define RTL8367C_ACT85_PRIORITY_MASK 0x400 -#define RTL8367C_ACT85_SVID_OFFSET 9 -#define RTL8367C_ACT85_SVID_MASK 0x200 -#define RTL8367C_ACT85_CVID_OFFSET 8 -#define RTL8367C_ACT85_CVID_MASK 0x100 -#define RTL8367C_OP84_NOT_OFFSET 6 -#define RTL8367C_OP84_NOT_MASK 0x40 -#define RTL8367C_ACT84_GPIO_OFFSET 5 -#define RTL8367C_ACT84_GPIO_MASK 0x20 -#define RTL8367C_ACT84_FORWARD_OFFSET 4 -#define RTL8367C_ACT84_FORWARD_MASK 0x10 -#define RTL8367C_ACT84_POLICING_OFFSET 3 -#define RTL8367C_ACT84_POLICING_MASK 0x8 -#define RTL8367C_ACT84_PRIORITY_OFFSET 2 -#define RTL8367C_ACT84_PRIORITY_MASK 0x4 -#define RTL8367C_ACT84_SVID_OFFSET 1 -#define RTL8367C_ACT84_SVID_MASK 0x2 -#define RTL8367C_ACT84_CVID_OFFSET 0 -#define RTL8367C_ACT84_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL43 0x06FB -#define RTL8367C_OP87_NOT_OFFSET 14 -#define RTL8367C_OP87_NOT_MASK 0x4000 -#define RTL8367C_ACT87_GPIO_OFFSET 13 -#define RTL8367C_ACT87_GPIO_MASK 0x2000 -#define RTL8367C_ACT87_FORWARD_OFFSET 12 -#define RTL8367C_ACT87_FORWARD_MASK 0x1000 -#define RTL8367C_ACT87_POLICING_OFFSET 11 -#define RTL8367C_ACT87_POLICING_MASK 0x800 -#define RTL8367C_ACT87_PRIORITY_OFFSET 10 -#define RTL8367C_ACT87_PRIORITY_MASK 0x400 -#define RTL8367C_ACT87_SVID_OFFSET 9 -#define RTL8367C_ACT87_SVID_MASK 0x200 -#define RTL8367C_ACT87_CVID_OFFSET 8 -#define RTL8367C_ACT87_CVID_MASK 0x100 -#define RTL8367C_OP86_NOT_OFFSET 6 -#define RTL8367C_OP86_NOT_MASK 0x40 -#define RTL8367C_ACT86_GPIO_OFFSET 5 -#define RTL8367C_ACT86_GPIO_MASK 0x20 -#define RTL8367C_ACT86_FORWARD_OFFSET 4 -#define RTL8367C_ACT86_FORWARD_MASK 0x10 -#define RTL8367C_ACT86_POLICING_OFFSET 3 -#define RTL8367C_ACT86_POLICING_MASK 0x8 -#define RTL8367C_ACT86_PRIORITY_OFFSET 2 -#define RTL8367C_ACT86_PRIORITY_MASK 0x4 -#define RTL8367C_ACT86_SVID_OFFSET 1 -#define RTL8367C_ACT86_SVID_MASK 0x2 -#define RTL8367C_ACT86_CVID_OFFSET 0 -#define RTL8367C_ACT86_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL44 0x06FC -#define RTL8367C_OP89_NOT_OFFSET 14 -#define RTL8367C_OP89_NOT_MASK 0x4000 -#define RTL8367C_ACT89_GPIO_OFFSET 13 -#define RTL8367C_ACT89_GPIO_MASK 0x2000 -#define RTL8367C_ACT89_FORWARD_OFFSET 12 -#define RTL8367C_ACT89_FORWARD_MASK 0x1000 -#define RTL8367C_ACT89_POLICING_OFFSET 11 -#define RTL8367C_ACT89_POLICING_MASK 0x800 -#define RTL8367C_ACT89_PRIORITY_OFFSET 10 -#define RTL8367C_ACT89_PRIORITY_MASK 0x400 -#define RTL8367C_ACT89_SVID_OFFSET 9 -#define RTL8367C_ACT89_SVID_MASK 0x200 -#define RTL8367C_ACT89_CVID_OFFSET 8 -#define RTL8367C_ACT89_CVID_MASK 0x100 -#define RTL8367C_OP88_NOT_OFFSET 6 -#define RTL8367C_OP88_NOT_MASK 0x40 -#define RTL8367C_ACT88_GPIO_OFFSET 5 -#define RTL8367C_ACT88_GPIO_MASK 0x20 -#define RTL8367C_ACT88_FORWARD_OFFSET 4 -#define RTL8367C_ACT88_FORWARD_MASK 0x10 -#define RTL8367C_ACT88_POLICING_OFFSET 3 -#define RTL8367C_ACT88_POLICING_MASK 0x8 -#define RTL8367C_ACT88_PRIORITY_OFFSET 2 -#define RTL8367C_ACT88_PRIORITY_MASK 0x4 -#define RTL8367C_ACT88_SVID_OFFSET 1 -#define RTL8367C_ACT88_SVID_MASK 0x2 -#define RTL8367C_ACT88_CVID_OFFSET 0 -#define RTL8367C_ACT88_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL45 0x06FD -#define RTL8367C_OP91_NOT_OFFSET 14 -#define RTL8367C_OP91_NOT_MASK 0x4000 -#define RTL8367C_ACT91_GPIO_OFFSET 13 -#define RTL8367C_ACT91_GPIO_MASK 0x2000 -#define RTL8367C_ACT91_FORWARD_OFFSET 12 -#define RTL8367C_ACT91_FORWARD_MASK 0x1000 -#define RTL8367C_ACT91_POLICING_OFFSET 11 -#define RTL8367C_ACT91_POLICING_MASK 0x800 -#define RTL8367C_ACT91_PRIORITY_OFFSET 10 -#define RTL8367C_ACT91_PRIORITY_MASK 0x400 -#define RTL8367C_ACT91_SVID_OFFSET 9 -#define RTL8367C_ACT91_SVID_MASK 0x200 -#define RTL8367C_ACT91_CVID_OFFSET 8 -#define RTL8367C_ACT91_CVID_MASK 0x100 -#define RTL8367C_OP90_NOT_OFFSET 6 -#define RTL8367C_OP90_NOT_MASK 0x40 -#define RTL8367C_ACT90_GPIO_OFFSET 5 -#define RTL8367C_ACT90_GPIO_MASK 0x20 -#define RTL8367C_ACT90_FORWARD_OFFSET 4 -#define RTL8367C_ACT90_FORWARD_MASK 0x10 -#define RTL8367C_ACT90_POLICING_OFFSET 3 -#define RTL8367C_ACT90_POLICING_MASK 0x8 -#define RTL8367C_ACT90_PRIORITY_OFFSET 2 -#define RTL8367C_ACT90_PRIORITY_MASK 0x4 -#define RTL8367C_ACT90_SVID_OFFSET 1 -#define RTL8367C_ACT90_SVID_MASK 0x2 -#define RTL8367C_ACT90_CVID_OFFSET 0 -#define RTL8367C_ACT90_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL46 0x06FE -#define RTL8367C_OP93_NOT_OFFSET 14 -#define RTL8367C_OP93_NOT_MASK 0x4000 -#define RTL8367C_ACT93_GPIO_OFFSET 13 -#define RTL8367C_ACT93_GPIO_MASK 0x2000 -#define RTL8367C_ACT93_FORWARD_OFFSET 12 -#define RTL8367C_ACT93_FORWARD_MASK 0x1000 -#define RTL8367C_ACT93_POLICING_OFFSET 11 -#define RTL8367C_ACT93_POLICING_MASK 0x800 -#define RTL8367C_ACT93_PRIORITY_OFFSET 10 -#define RTL8367C_ACT93_PRIORITY_MASK 0x400 -#define RTL8367C_ACT93_SVID_OFFSET 9 -#define RTL8367C_ACT93_SVID_MASK 0x200 -#define RTL8367C_ACT93_CVID_OFFSET 8 -#define RTL8367C_ACT93_CVID_MASK 0x100 -#define RTL8367C_OP92_NOT_OFFSET 6 -#define RTL8367C_OP92_NOT_MASK 0x40 -#define RTL8367C_ACT92_GPIO_OFFSET 5 -#define RTL8367C_ACT92_GPIO_MASK 0x20 -#define RTL8367C_ACT92_FORWARD_OFFSET 4 -#define RTL8367C_ACT92_FORWARD_MASK 0x10 -#define RTL8367C_ACT92_POLICING_OFFSET 3 -#define RTL8367C_ACT92_POLICING_MASK 0x8 -#define RTL8367C_ACT92_PRIORITY_OFFSET 2 -#define RTL8367C_ACT92_PRIORITY_MASK 0x4 -#define RTL8367C_ACT92_SVID_OFFSET 1 -#define RTL8367C_ACT92_SVID_MASK 0x2 -#define RTL8367C_ACT92_CVID_OFFSET 0 -#define RTL8367C_ACT92_CVID_MASK 0x1 - -#define RTL8367C_REG_ACL_ACTION_CTRL47 0x06FF -#define RTL8367C_OP95_NOT_OFFSET 14 -#define RTL8367C_OP95_NOT_MASK 0x4000 -#define RTL8367C_ACT95_GPIO_OFFSET 13 -#define RTL8367C_ACT95_GPIO_MASK 0x2000 -#define RTL8367C_ACT95_FORWARD_OFFSET 12 -#define RTL8367C_ACT95_FORWARD_MASK 0x1000 -#define RTL8367C_ACT95_POLICING_OFFSET 11 -#define RTL8367C_ACT95_POLICING_MASK 0x800 -#define RTL8367C_ACT95_PRIORITY_OFFSET 10 -#define RTL8367C_ACT95_PRIORITY_MASK 0x400 -#define RTL8367C_ACT95_SVID_OFFSET 9 -#define RTL8367C_ACT95_SVID_MASK 0x200 -#define RTL8367C_ACT95_CVID_OFFSET 8 -#define RTL8367C_ACT95_CVID_MASK 0x100 -#define RTL8367C_OP94_NOT_OFFSET 6 -#define RTL8367C_OP94_NOT_MASK 0x40 -#define RTL8367C_ACT94_GPIO_OFFSET 5 -#define RTL8367C_ACT94_GPIO_MASK 0x20 -#define RTL8367C_ACT94_FORWARD_OFFSET 4 -#define RTL8367C_ACT94_FORWARD_MASK 0x10 -#define RTL8367C_ACT94_POLICING_OFFSET 3 -#define RTL8367C_ACT94_POLICING_MASK 0x8 -#define RTL8367C_ACT94_PRIORITY_OFFSET 2 -#define RTL8367C_ACT94_PRIORITY_MASK 0x4 -#define RTL8367C_ACT94_SVID_OFFSET 1 -#define RTL8367C_ACT94_SVID_MASK 0x2 -#define RTL8367C_ACT94_CVID_OFFSET 0 -#define RTL8367C_ACT94_CVID_MASK 0x1 - -/* (16'h0700)cvlan_reg */ - -#define RTL8367C_REG_VLAN_PVID_CTRL0 0x0700 -#define RTL8367C_PORT1_VIDX_OFFSET 8 -#define RTL8367C_PORT1_VIDX_MASK 0x1F00 -#define RTL8367C_PORT0_VIDX_OFFSET 0 -#define RTL8367C_PORT0_VIDX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PVID_CTRL1 0x0701 -#define RTL8367C_PORT3_VIDX_OFFSET 8 -#define RTL8367C_PORT3_VIDX_MASK 0x1F00 -#define RTL8367C_PORT2_VIDX_OFFSET 0 -#define RTL8367C_PORT2_VIDX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PVID_CTRL2 0x0702 -#define RTL8367C_PORT5_VIDX_OFFSET 8 -#define RTL8367C_PORT5_VIDX_MASK 0x1F00 -#define RTL8367C_PORT4_VIDX_OFFSET 0 -#define RTL8367C_PORT4_VIDX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PVID_CTRL3 0x0703 -#define RTL8367C_PORT7_VIDX_OFFSET 8 -#define RTL8367C_PORT7_VIDX_MASK 0x1F00 -#define RTL8367C_PORT6_VIDX_OFFSET 0 -#define RTL8367C_PORT6_VIDX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PVID_CTRL4 0x0704 -#define RTL8367C_PORT9_VIDX_OFFSET 8 -#define RTL8367C_PORT9_VIDX_MASK 0x1F00 -#define RTL8367C_PORT8_VIDX_OFFSET 0 -#define RTL8367C_PORT8_VIDX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PVID_CTRL5 0x0705 -#define RTL8367C_VLAN_PVID_CTRL5_OFFSET 0 -#define RTL8367C_VLAN_PVID_CTRL5_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB0_VALID 0x0708 -#define RTL8367C_VLAN_PPB0_VALID_VALID_EXT_OFFSET 8 -#define RTL8367C_VLAN_PPB0_VALID_VALID_EXT_MASK 0x700 -#define RTL8367C_VLAN_PPB0_VALID_VALID_OFFSET 0 -#define RTL8367C_VLAN_PPB0_VALID_VALID_MASK 0xFF - -#define RTL8367C_REG_VLAN_PPB0_CTRL0 0x0709 -#define RTL8367C_VLAN_PPB0_CTRL0_PORT2_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB0_CTRL0_PORT2_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB0_CTRL0_PORT1_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB0_CTRL0_PORT1_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB0_CTRL0_PORT0_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB0_CTRL0_PORT0_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB0_CTRL1 0x070a -#define RTL8367C_VLAN_PPB0_CTRL1_PORT5_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB0_CTRL1_PORT5_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB0_CTRL1_PORT4_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB0_CTRL1_PORT4_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB0_CTRL1_PORT3_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB0_CTRL1_PORT3_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB0_CTRL2 0x070b -#define RTL8367C_VLAN_PPB0_CTRL2_FRAME_TYPE_OFFSET 10 -#define RTL8367C_VLAN_PPB0_CTRL2_FRAME_TYPE_MASK 0xC00 -#define RTL8367C_VLAN_PPB0_CTRL2_PORT7_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB0_CTRL2_PORT7_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB0_CTRL2_PORT6_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB0_CTRL2_PORT6_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB0_CTRL4 0x070c -#define RTL8367C_VLAN_PPB0_CTRL4_PORT10_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB0_CTRL4_PORT10_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB0_CTRL4_PORT9_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB0_CTRL4_PORT9_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB0_CTRL4_PORT8_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB0_CTRL4_PORT8_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB0_CTRL3 0x070f - -#define RTL8367C_REG_VLAN_PPB1_VALID 0x0710 -#define RTL8367C_VLAN_PPB1_VALID_VALID_EXT_OFFSET 8 -#define RTL8367C_VLAN_PPB1_VALID_VALID_EXT_MASK 0x700 -#define RTL8367C_VLAN_PPB1_VALID_VALID_OFFSET 0 -#define RTL8367C_VLAN_PPB1_VALID_VALID_MASK 0xFF - -#define RTL8367C_REG_VLAN_PPB1_CTRL0 0x0711 -#define RTL8367C_VLAN_PPB1_CTRL0_PORT2_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB1_CTRL0_PORT2_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB1_CTRL0_PORT1_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB1_CTRL0_PORT1_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB1_CTRL0_PORT0_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB1_CTRL0_PORT0_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB1_CTRL1 0x0712 -#define RTL8367C_VLAN_PPB1_CTRL1_PORT5_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB1_CTRL1_PORT5_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB1_CTRL1_PORT4_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB1_CTRL1_PORT4_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB1_CTRL1_PORT3_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB1_CTRL1_PORT3_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB1_CTRL2 0x0713 -#define RTL8367C_VLAN_PPB1_CTRL2_FRAME_TYPE_OFFSET 10 -#define RTL8367C_VLAN_PPB1_CTRL2_FRAME_TYPE_MASK 0xC00 -#define RTL8367C_VLAN_PPB1_CTRL2_PORT7_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB1_CTRL2_PORT7_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB1_CTRL2_PORT6_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB1_CTRL2_PORT6_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB1_CTRL4 0x0714 -#define RTL8367C_VLAN_PPB1_CTRL4_PORT10_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB1_CTRL4_PORT10_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB1_CTRL4_PORT9_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB1_CTRL4_PORT9_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB1_CTRL4_PORT8_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB1_CTRL4_PORT8_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB1_CTRL3 0x0717 - -#define RTL8367C_REG_VLAN_PPB2_VALID 0x0718 -#define RTL8367C_VLAN_PPB2_VALID_VALID_EXT_OFFSET 8 -#define RTL8367C_VLAN_PPB2_VALID_VALID_EXT_MASK 0x700 -#define RTL8367C_VLAN_PPB2_VALID_VALID_OFFSET 0 -#define RTL8367C_VLAN_PPB2_VALID_VALID_MASK 0xFF - -#define RTL8367C_REG_VLAN_PPB2_CTRL0 0x0719 -#define RTL8367C_VLAN_PPB2_CTRL0_PORT2_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB2_CTRL0_PORT2_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB2_CTRL0_PORT1_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB2_CTRL0_PORT1_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB2_CTRL0_PORT0_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB2_CTRL0_PORT0_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB2_CTRL1 0x071a -#define RTL8367C_VLAN_PPB2_CTRL1_PORT5_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB2_CTRL1_PORT5_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB2_CTRL1_PORT4_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB2_CTRL1_PORT4_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB2_CTRL1_PORT3_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB2_CTRL1_PORT3_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB2_CTRL2 0x071b -#define RTL8367C_VLAN_PPB2_CTRL2_FRAME_TYPE_OFFSET 10 -#define RTL8367C_VLAN_PPB2_CTRL2_FRAME_TYPE_MASK 0xC00 -#define RTL8367C_VLAN_PPB2_CTRL2_PORT7_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB2_CTRL2_PORT7_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB2_CTRL2_PORT6_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB2_CTRL2_PORT6_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB2_CTRL4 0x071c -#define RTL8367C_VLAN_PPB2_CTRL4_PORT10_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB2_CTRL4_PORT10_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB2_CTRL4_PORT9_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB2_CTRL4_PORT9_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB2_CTRL4_PORT8_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB2_CTRL4_PORT8_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB2_CTRL3 0x071f - -#define RTL8367C_REG_VLAN_PPB3_VALID 0x0720 -#define RTL8367C_VLAN_PPB3_VALID_VALID_EXT_OFFSET 8 -#define RTL8367C_VLAN_PPB3_VALID_VALID_EXT_MASK 0x700 -#define RTL8367C_VLAN_PPB3_VALID_VALID_OFFSET 0 -#define RTL8367C_VLAN_PPB3_VALID_VALID_MASK 0xFF - -#define RTL8367C_REG_VLAN_PPB3_CTRL0 0x0721 -#define RTL8367C_VLAN_PPB3_CTRL0_PORT2_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB3_CTRL0_PORT2_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB3_CTRL0_PORT1_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB3_CTRL0_PORT1_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB3_CTRL0_PORT0_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB3_CTRL0_PORT0_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB3_CTRL1 0x0722 -#define RTL8367C_VLAN_PPB3_CTRL1_PORT5_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB3_CTRL1_PORT5_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB3_CTRL1_PORT4_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB3_CTRL1_PORT4_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB3_CTRL1_PORT3_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB3_CTRL1_PORT3_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB3_CTRL2 0x0723 -#define RTL8367C_VLAN_PPB3_CTRL2_FRAME_TYPE_OFFSET 10 -#define RTL8367C_VLAN_PPB3_CTRL2_FRAME_TYPE_MASK 0xC00 -#define RTL8367C_VLAN_PPB3_CTRL2_PORT7_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB3_CTRL2_PORT7_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB3_CTRL2_PORT6_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB3_CTRL2_PORT6_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB3_CTRL4 0x0724 -#define RTL8367C_VLAN_PPB3_CTRL4_PORT10_INDEX_OFFSET 10 -#define RTL8367C_VLAN_PPB3_CTRL4_PORT10_INDEX_MASK 0x7C00 -#define RTL8367C_VLAN_PPB3_CTRL4_PORT9_INDEX_OFFSET 5 -#define RTL8367C_VLAN_PPB3_CTRL4_PORT9_INDEX_MASK 0x3E0 -#define RTL8367C_VLAN_PPB3_CTRL4_PORT8_INDEX_OFFSET 0 -#define RTL8367C_VLAN_PPB3_CTRL4_PORT8_INDEX_MASK 0x1F - -#define RTL8367C_REG_VLAN_PPB3_CTRL3 0x0727 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION0_CTRL0 0x0728 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION0_CTRL1 0x0729 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION0_CTRL2 0x072a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION0_CTRL3 0x072b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION0_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION1_CTRL0 0x072c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION1_CTRL1 0x072d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION1_CTRL2 0x072e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION1_CTRL3 0x072f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION1_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION2_CTRL0 0x0730 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION2_CTRL1 0x0731 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION2_CTRL2 0x0732 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION2_CTRL3 0x0733 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION2_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION3_CTRL0 0x0734 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION3_CTRL1 0x0735 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION3_CTRL2 0x0736 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION3_CTRL3 0x0737 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION3_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION4_CTRL0 0x0738 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION4_CTRL1 0x0739 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION4_CTRL2 0x073a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION4_CTRL3 0x073b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION4_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION5_CTRL0 0x073c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION5_CTRL1 0x073d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION5_CTRL2 0x073e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION5_CTRL3 0x073f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION5_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION6_CTRL0 0x0740 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION6_CTRL1 0x0741 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION6_CTRL2 0x0742 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION6_CTRL3 0x0743 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION6_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION7_CTRL0 0x0744 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION7_CTRL1 0x0745 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION7_CTRL2 0x0746 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION7_CTRL3 0x0747 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION7_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION8_CTRL0 0x0748 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION8_CTRL1 0x0749 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION8_CTRL2 0x074a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION8_CTRL3 0x074b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION8_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION9_CTRL0 0x074c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION9_CTRL1 0x074d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION9_CTRL2 0x074e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION9_CTRL3 0x074f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION9_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION10_CTRL0 0x0750 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION10_CTRL1 0x0751 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION10_CTRL2 0x0752 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION10_CTRL3 0x0753 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION10_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION11_CTRL0 0x0754 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION11_CTRL1 0x0755 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION11_CTRL2 0x0756 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION11_CTRL3 0x0757 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION11_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION12_CTRL0 0x0758 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION12_CTRL1 0x0759 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION12_CTRL2 0x075a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION12_CTRL3 0x075b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION12_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION13_CTRL0 0x075c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION13_CTRL1 0x075d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION13_CTRL2 0x075e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION13_CTRL3 0x075f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION13_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION14_CTRL0 0x0760 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION14_CTRL1 0x0761 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION14_CTRL2 0x0762 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION14_CTRL3 0x0763 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION14_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION15_CTRL0 0x0764 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION15_CTRL1 0x0765 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION15_CTRL2 0x0766 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION15_CTRL3 0x0767 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION15_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION16_CTRL0 0x0768 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION16_CTRL1 0x0769 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION16_CTRL2 0x076a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION16_CTRL3 0x076b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION16_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION17_CTRL0 0x076c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION17_CTRL1 0x076d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION17_CTRL2 0x076e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION17_CTRL3 0x076f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION17_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION18_CTRL0 0x0770 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION18_CTRL1 0x0771 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION18_CTRL2 0x0772 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION18_CTRL3 0x0773 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION18_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION19_CTRL0 0x0774 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION19_CTRL1 0x0775 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION19_CTRL2 0x0776 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION19_CTRL3 0x0777 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION19_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION20_CTRL0 0x0778 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION20_CTRL1 0x0779 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION20_CTRL2 0x077a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION20_CTRL3 0x077b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION20_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION21_CTRL0 0x077c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION21_CTRL1 0x077d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION21_CTRL2 0x077e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION21_CTRL3 0x077f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION21_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION22_CTRL0 0x0780 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION22_CTRL1 0x0781 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION22_CTRL2 0x0782 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION22_CTRL3 0x0783 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION22_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION23_CTRL0 0x0784 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION23_CTRL1 0x0785 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION23_CTRL2 0x0786 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION23_CTRL3 0x0787 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION23_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION24_CTRL0 0x0788 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION24_CTRL1 0x0789 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION24_CTRL2 0x078a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION24_CTRL3 0x078b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION24_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION25_CTRL0 0x078c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION25_CTRL1 0x078d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION25_CTRL2 0x078e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION25_CTRL3 0x078f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION25_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION26_CTRL0 0x0790 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION26_CTRL1 0x0791 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION26_CTRL2 0x0792 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION26_CTRL3 0x0793 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION26_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION27_CTRL0 0x0794 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION27_CTRL1 0x0795 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION27_CTRL2 0x0796 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION27_CTRL3 0x0797 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION27_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION28_CTRL0 0x0798 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION28_CTRL1 0x0799 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION28_CTRL2 0x079a -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION28_CTRL3 0x079b -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION28_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION29_CTRL0 0x079c -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION29_CTRL1 0x079d -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION29_CTRL2 0x079e -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION29_CTRL3 0x079f -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION29_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION30_CTRL0 0x07a0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION30_CTRL1 0x07a1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION30_CTRL2 0x07a2 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION30_CTRL3 0x07a3 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION30_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION31_CTRL0 0x07a4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL0_MBR_EXT_OFFSET 8 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL0_MBR_EXT_MASK 0x700 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL0_MBR_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL0_MBR_MASK 0xFF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION31_CTRL1 0x07a5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL1_MASK 0xF - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION31_CTRL2 0x07a6 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_METERIDX_EXT_OFFSET 10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_METERIDX_EXT_MASK 0x400 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_METERIDX_OFFSET 5 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_METERIDX_MASK 0x3E0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_ENVLANPOL_OFFSET 4 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_ENVLANPOL_MASK 0x10 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_VBPRI_OFFSET 1 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_VBPRI_MASK 0xE -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_VBPEN_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL2_VBPEN_MASK 0x1 - -#define RTL8367C_REG_VLAN_MEMBER_CONFIGURATION31_CTRL3 0x07a7 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_MEMBER_CONFIGURATION31_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_VLAN_CTRL 0x07a8 -#define RTL8367C_VLAN_CTRL_OFFSET 0 -#define RTL8367C_VLAN_CTRL_MASK 0x1 - -#define RTL8367C_REG_VLAN_INGRESS 0x07a9 -#define RTL8367C_VLAN_INGRESS_OFFSET 0 -#define RTL8367C_VLAN_INGRESS_MASK 0x7FF - -#define RTL8367C_REG_VLAN_ACCEPT_FRAME_TYPE_CTRL0 0x07aa -#define RTL8367C_PORT7_FRAME_TYPE_OFFSET 14 -#define RTL8367C_PORT7_FRAME_TYPE_MASK 0xC000 -#define RTL8367C_PORT6_FRAME_TYPE_OFFSET 12 -#define RTL8367C_PORT6_FRAME_TYPE_MASK 0x3000 -#define RTL8367C_PORT5_FRAME_TYPE_OFFSET 10 -#define RTL8367C_PORT5_FRAME_TYPE_MASK 0xC00 -#define RTL8367C_PORT4_FRAME_TYPE_OFFSET 8 -#define RTL8367C_PORT4_FRAME_TYPE_MASK 0x300 -#define RTL8367C_PORT3_FRAME_TYPE_OFFSET 6 -#define RTL8367C_PORT3_FRAME_TYPE_MASK 0xC0 -#define RTL8367C_PORT2_FRAME_TYPE_OFFSET 4 -#define RTL8367C_PORT2_FRAME_TYPE_MASK 0x30 -#define RTL8367C_PORT1_FRAME_TYPE_OFFSET 2 -#define RTL8367C_PORT1_FRAME_TYPE_MASK 0xC -#define RTL8367C_PORT0_FRAME_TYPE_OFFSET 0 -#define RTL8367C_PORT0_FRAME_TYPE_MASK 0x3 - -#define RTL8367C_REG_VLAN_ACCEPT_FRAME_TYPE_CTRL1 0x07ab -#define RTL8367C_PORT10_FRAME_TYPE_OFFSET 4 -#define RTL8367C_PORT10_FRAME_TYPE_MASK 0x30 -#define RTL8367C_PORT9_FRAME_TYPE_OFFSET 2 -#define RTL8367C_PORT9_FRAME_TYPE_MASK 0xC -#define RTL8367C_PORT8_FRAME_TYPE_OFFSET 0 -#define RTL8367C_PORT8_FRAME_TYPE_MASK 0x3 - -#define RTL8367C_REG_PORT_PBFIDEN 0x07ac -#define RTL8367C_PORT_PBFIDEN_OFFSET 0 -#define RTL8367C_PORT_PBFIDEN_MASK 0x7FF - -#define RTL8367C_REG_PORT0_PBFID 0x07ad -#define RTL8367C_PORT0_PBFID_OFFSET 0 -#define RTL8367C_PORT0_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT1_PBFID 0x07ae -#define RTL8367C_PORT1_PBFID_OFFSET 0 -#define RTL8367C_PORT1_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT2_PBFID 0x07af -#define RTL8367C_PORT2_PBFID_OFFSET 0 -#define RTL8367C_PORT2_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT3_PBFID 0x07b0 -#define RTL8367C_PORT3_PBFID_OFFSET 0 -#define RTL8367C_PORT3_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT4_PBFID 0x07b1 -#define RTL8367C_PORT4_PBFID_OFFSET 0 -#define RTL8367C_PORT4_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT5_PBFID 0x07b2 -#define RTL8367C_PORT5_PBFID_OFFSET 0 -#define RTL8367C_PORT5_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT6_PBFID 0x07b3 -#define RTL8367C_PORT6_PBFID_OFFSET 0 -#define RTL8367C_PORT6_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT7_PBFID 0x07b4 -#define RTL8367C_PORT7_PBFID_OFFSET 0 -#define RTL8367C_PORT7_PBFID_MASK 0xF - -#define RTL8367C_REG_VLAN_EXT_CTRL 0x07b5 -#define RTL8367C_VLAN_1P_REMARK_BYPASS_REALKEEP_OFFSET 2 -#define RTL8367C_VLAN_1P_REMARK_BYPASS_REALKEEP_MASK 0x4 -#define RTL8367C_VLAN_VID4095_TYPE_OFFSET 1 -#define RTL8367C_VLAN_VID4095_TYPE_MASK 0x2 -#define RTL8367C_VLAN_VID0_TYPE_OFFSET 0 -#define RTL8367C_VLAN_VID0_TYPE_MASK 0x1 - -#define RTL8367C_REG_VLAN_EXT_CTRL2 0x07b6 -#define RTL8367C_VLAN_EXT_CTRL2_OFFSET 0 -#define RTL8367C_VLAN_EXT_CTRL2_MASK 0x1 - -#define RTL8367C_REG_PORT8_PBFID 0x07b7 -#define RTL8367C_PORT8_PBFID_OFFSET 0 -#define RTL8367C_PORT8_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT9_PBFID 0x07b8 -#define RTL8367C_PORT9_PBFID_OFFSET 0 -#define RTL8367C_PORT9_PBFID_MASK 0xF - -#define RTL8367C_REG_PORT10_PBFID 0x07b9 -#define RTL8367C_PORT10_PBFID_OFFSET 0 -#define RTL8367C_PORT10_PBFID_MASK 0xF - -#define RTL8367C_REG_CVLAN_DUMMY00 0x07E0 - -#define RTL8367C_REG_CVLAN_DUMMY01 0x07E1 - -#define RTL8367C_REG_CVLAN_DUMMY02 0x07E2 - -#define RTL8367C_REG_CVLAN_DUMMY03 0x07E3 - -#define RTL8367C_REG_CVLAN_DUMMY04 0x07E4 - -#define RTL8367C_REG_CVLAN_DUMMY05 0x07E5 - -#define RTL8367C_REG_CVLAN_DUMMY06 0x07E6 - -#define RTL8367C_REG_CVLAN_DUMMY07 0x07E7 - -#define RTL8367C_REG_CVLAN_DUMMY08 0x07E8 - -#define RTL8367C_REG_CVLAN_DUMMY09 0x07E9 - -#define RTL8367C_REG_CVLAN_DUMMY10 0x07EA - -#define RTL8367C_REG_CVLAN_DUMMY11 0x07EB - -#define RTL8367C_REG_CVLAN_DUMMY12 0x07EC - -#define RTL8367C_REG_CVLAN_DUMMY13 0x07ED - -#define RTL8367C_REG_CVLAN_DUMMY14 0x07EE - -#define RTL8367C_REG_CVLAN_DUMMY15 0x07EF - -/* (16'h0800)dpm_reg */ - -#define RTL8367C_REG_RMA_CTRL00 0x0800 -#define RTL8367C_RMA_CTRL00_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL00_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL00_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL00_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_TRAP_PRIORITY_OFFSET 3 -#define RTL8367C_TRAP_PRIORITY_MASK 0x38 -#define RTL8367C_RMA_CTRL00_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL00_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL00_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL00_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL00_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL00_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL01 0x0801 -#define RTL8367C_RMA_CTRL01_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL01_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL01_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL01_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL01_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL01_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL01_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL01_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL01_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL01_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL02 0x0802 -#define RTL8367C_RMA_CTRL02_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL02_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL02_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL02_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL02_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL02_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL02_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL02_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL02_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL02_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL03 0x0803 -#define RTL8367C_RMA_CTRL03_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL03_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL03_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL03_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL03_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL03_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL03_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL03_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL03_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL03_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL04 0x0804 -#define RTL8367C_RMA_CTRL04_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL04_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL04_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL04_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL04_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL04_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL04_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL04_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL04_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL04_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL08 0x0808 -#define RTL8367C_RMA_CTRL08_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL08_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL08_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL08_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL08_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL08_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL08_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL08_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL08_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL08_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL0D 0x080d -#define RTL8367C_RMA_CTRL0D_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL0D_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL0D_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL0D_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL0D_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL0D_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL0D_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL0D_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL0D_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL0D_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL0E 0x080e -#define RTL8367C_RMA_CTRL0E_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL0E_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL0E_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL0E_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL0E_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL0E_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL0E_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL0E_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL0E_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL0E_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL10 0x0810 -#define RTL8367C_RMA_CTRL10_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL10_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL10_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL10_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL10_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL10_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL10_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL10_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL10_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL10_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL11 0x0811 -#define RTL8367C_RMA_CTRL11_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL11_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL11_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL11_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL11_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL11_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL11_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL11_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL11_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL11_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL12 0x0812 -#define RTL8367C_RMA_CTRL12_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL12_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL12_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL12_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL12_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL12_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL12_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL12_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL12_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL12_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL13 0x0813 -#define RTL8367C_RMA_CTRL13_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL13_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL13_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL13_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL13_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL13_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL13_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL13_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL13_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL13_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL18 0x0818 -#define RTL8367C_RMA_CTRL18_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL18_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL18_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL18_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL18_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL18_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL18_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL18_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL18_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL18_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL1A 0x081a -#define RTL8367C_RMA_CTRL1A_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL1A_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL1A_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL1A_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL1A_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL1A_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL1A_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL1A_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL1A_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL1A_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL20 0x0820 -#define RTL8367C_RMA_CTRL20_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL20_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL20_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL20_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL20_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL20_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL20_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL20_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL20_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL20_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL21 0x0821 -#define RTL8367C_RMA_CTRL21_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL21_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL21_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL21_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL21_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL21_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL21_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL21_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL21_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL21_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL22 0x0822 -#define RTL8367C_RMA_CTRL22_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL22_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL22_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL22_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL22_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL22_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL22_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL22_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL22_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL22_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL_CDP 0x0830 -#define RTL8367C_RMA_CTRL_CDP_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL_CDP_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL_CDP_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL_CDP_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL_CDP_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL_CDP_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL_CDP_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL_CDP_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL_CDP_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL_CDP_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL_CSSTP 0x0831 -#define RTL8367C_RMA_CTRL_CSSTP_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL_CSSTP_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL_CSSTP_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL_CSSTP_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL_CSSTP_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL_CSSTP_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL_CSSTP_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL_CSSTP_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL_CSSTP_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL_CSSTP_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_CTRL_LLDP 0x0832 -#define RTL8367C_RMA_CTRL_LLDP_OPERATION_OFFSET 7 -#define RTL8367C_RMA_CTRL_LLDP_OPERATION_MASK 0x180 -#define RTL8367C_RMA_CTRL_LLDP_DISCARD_STORM_FILTER_OFFSET 6 -#define RTL8367C_RMA_CTRL_LLDP_DISCARD_STORM_FILTER_MASK 0x40 -#define RTL8367C_RMA_CTRL_LLDP_KEEP_FORMAT_OFFSET 2 -#define RTL8367C_RMA_CTRL_LLDP_KEEP_FORMAT_MASK 0x4 -#define RTL8367C_RMA_CTRL_LLDP_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_RMA_CTRL_LLDP_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_RMA_CTRL_LLDP_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_RMA_CTRL_LLDP_PORTISO_LEAKY_MASK 0x1 - -#define RTL8367C_REG_RMA_LLDP_EN 0x0833 -#define RTL8367C_RMA_LLDP_EN_OFFSET 0 -#define RTL8367C_RMA_LLDP_EN_MASK 0x1 - -#define RTL8367C_REG_VLAN_PORTBASED_PRIORITY_CTRL0 0x0851 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT3_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT3_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT2_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT2_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT1_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT1_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT0_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL0_PORT0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PORTBASED_PRIORITY_CTRL1 0x0852 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT7_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT7_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT6_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT6_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT5_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT5_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT4_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL1_PORT4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PORTBASED_PRIORITY_CTRL2 0x0853 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL2_PORT10_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL2_PORT10_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL2_PORT9_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL2_PORT9_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL2_PORT8_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PORTBASED_PRIORITY_CTRL2_PORT8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM0_CTRL0 0x0855 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT3_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT3_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT2_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT2_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT1_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT1_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT0_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL0_PORT0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM0_CTRL1 0x0856 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT7_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT7_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT6_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT6_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT5_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT5_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT4_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL1_PORT4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM0_CTRL2 0x0857 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL2_PORT10_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL2_PORT10_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL2_PORT9_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL2_PORT9_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL2_PORT8_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM0_CTRL2_PORT8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM1_CTRL0 0x0859 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT3_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT3_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT2_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT2_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT1_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT1_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT0_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL0_PORT0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM1_CTRL1 0x085a -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT7_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT7_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT6_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT6_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT5_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT5_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT4_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL1_PORT4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM1_CTRL2 0x085b -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL2_PORT10_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL2_PORT10_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL2_PORT9_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL2_PORT9_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL2_PORT8_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM1_CTRL2_PORT8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM2_CTRL0 0x085d -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT3_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT3_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT2_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT2_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT1_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT1_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT0_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL0_PORT0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM2_CTRL1 0x085e -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT7_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT7_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT6_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT6_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT5_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT5_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT4_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL1_PORT4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM2_CTRL2 0x085f -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL2_PORT10_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL2_PORT10_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL2_PORT9_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL2_PORT9_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL2_PORT8_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM2_CTRL2_PORT8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM3_CTRL0 0x0861 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT3_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT3_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT2_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT2_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT1_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT1_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT0_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL0_PORT0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM3_CTRL1 0x0862 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT7_PRIORITY_OFFSET 12 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT7_PRIORITY_MASK 0x7000 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT6_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT6_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT5_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT5_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT4_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL1_PORT4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_VLAN_PPB_PRIORITY_ITEM3_CTRL2 0x0863 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL2_PORT10_PRIORITY_OFFSET 8 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL2_PORT10_PRIORITY_MASK 0x700 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL2_PORT9_PRIORITY_OFFSET 4 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL2_PORT9_PRIORITY_MASK 0x70 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL2_PORT8_PRIORITY_OFFSET 0 -#define RTL8367C_VLAN_PPB_PRIORITY_ITEM3_CTRL2_PORT8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_1Q_PRIORITY_REMAPPING_CTRL0 0x0865 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY3_OFFSET 12 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY3_MASK 0x7000 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY2_OFFSET 8 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY2_MASK 0x700 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY1_OFFSET 4 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY1_MASK 0x70 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY0_OFFSET 0 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL0_PRIORITY0_MASK 0x7 - -#define RTL8367C_REG_QOS_1Q_PRIORITY_REMAPPING_CTRL1 0x0866 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY7_OFFSET 12 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY7_MASK 0x7000 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY6_OFFSET 8 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY6_MASK 0x700 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY5_OFFSET 4 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY5_MASK 0x70 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY4_OFFSET 0 -#define RTL8367C_QOS_1Q_PRIORITY_REMAPPING_CTRL1_PRIORITY4_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL0 0x0867 -#define RTL8367C_DSCP3_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP3_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP2_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP2_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP1_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP1_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP0_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL1 0x0868 -#define RTL8367C_DSCP7_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP7_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP6_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP6_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP5_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP5_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP4_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL2 0x0869 -#define RTL8367C_DSCP11_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP11_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP10_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP10_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP9_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP9_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP8_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL3 0x086a -#define RTL8367C_DSCP15_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP15_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP14_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP14_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP13_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP13_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP12_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP12_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL4 0x086b -#define RTL8367C_DSCP19_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP19_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP18_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP18_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP17_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP17_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP16_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP16_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL5 0x086c -#define RTL8367C_DSCP23_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP23_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP22_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP22_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP21_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP21_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP20_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP20_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL6 0x086d -#define RTL8367C_DSCP27_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP27_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP26_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP26_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP25_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP25_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP24_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP24_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL7 0x086e -#define RTL8367C_DSCP31_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP31_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP30_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP30_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP29_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP29_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP28_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP28_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL8 0x086f -#define RTL8367C_DSCP35_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP35_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP34_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP34_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP33_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP33_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP32_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP32_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL9 0x0870 -#define RTL8367C_DSCP39_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP39_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP38_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP38_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP37_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP37_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP36_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP36_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL10 0x0871 -#define RTL8367C_DSCP43_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP43_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP42_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP42_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP41_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP41_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP40_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP40_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL11 0x0872 -#define RTL8367C_DSCP47_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP47_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP46_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP46_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP45_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP45_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP44_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP44_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL12 0x0873 -#define RTL8367C_DSCP51_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP51_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP50_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP50_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP49_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP49_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP48_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP48_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL13 0x0874 -#define RTL8367C_DSCP55_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP55_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP54_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP54_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP53_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP53_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP52_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP52_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL14 0x0875 -#define RTL8367C_DSCP59_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP59_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP58_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP58_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP57_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP57_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP56_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP56_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_DSCP_TO_PRIORITY_CTRL15 0x0876 -#define RTL8367C_DSCP63_PRIORITY_OFFSET 12 -#define RTL8367C_DSCP63_PRIORITY_MASK 0x7000 -#define RTL8367C_DSCP62_PRIORITY_OFFSET 8 -#define RTL8367C_DSCP62_PRIORITY_MASK 0x700 -#define RTL8367C_DSCP61_PRIORITY_OFFSET 4 -#define RTL8367C_DSCP61_PRIORITY_MASK 0x70 -#define RTL8367C_DSCP60_PRIORITY_OFFSET 0 -#define RTL8367C_DSCP60_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_PORTBASED_PRIORITY_CTRL0 0x0877 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT3_PRIORITY_OFFSET 12 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT3_PRIORITY_MASK 0x7000 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT2_PRIORITY_OFFSET 8 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT2_PRIORITY_MASK 0x700 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT1_PRIORITY_OFFSET 4 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT1_PRIORITY_MASK 0x70 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT0_PRIORITY_OFFSET 0 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL0_PORT0_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_PORTBASED_PRIORITY_CTRL1 0x0878 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT7_PRIORITY_OFFSET 12 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT7_PRIORITY_MASK 0x7000 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT6_PRIORITY_OFFSET 8 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT6_PRIORITY_MASK 0x700 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT5_PRIORITY_OFFSET 4 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT5_PRIORITY_MASK 0x70 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT4_PRIORITY_OFFSET 0 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL1_PORT4_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_DUMMY0879 0x0879 -#define RTL8367C_DUMMY0879_OFFSET 0 -#define RTL8367C_DUMMY0879_MASK 0x1 - -#define RTL8367C_REG_QOS_PORTBASED_PRIORITY_CTRL2 0x087a -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL2_PORT10_PRIORITY_OFFSET 8 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL2_PORT10_PRIORITY_MASK 0x700 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL2_PORT9_PRIORITY_OFFSET 4 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL2_PORT9_PRIORITY_MASK 0x70 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL2_PORT8_PRIORITY_OFFSET 0 -#define RTL8367C_QOS_PORTBASED_PRIORITY_CTRL2_PORT8_PRIORITY_MASK 0x7 - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_CTRL0 0x087b -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL0_QOS_ACL_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL0_QOS_ACL_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL0_QOS_PORT_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL0_QOS_PORT_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_CTRL1 0x087c -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL1_QOS_DOT1Q_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL1_QOS_DOT1Q_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL1_QOS_DSCP_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL1_QOS_DSCP_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_CTRL2 0x087d -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL2_QOS_CVLAN_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL2_QOS_CVLAN_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL2_QOS_SVLAN_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL2_QOS_SVLAN_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_CTRL3 0x087e -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL3_QOS_SA_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL3_QOS_SA_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL3_QOS_LUTFWD_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_CTRL3_QOS_LUTFWD_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0 0x087f -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY3_OFFSET 12 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY3_MASK 0x7000 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY2_OFFSET 8 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY2_MASK 0x700 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY1_OFFSET 4 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY1_MASK 0x70 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY0_OFFSET 0 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL0_PRIORITY0_MASK 0x7 - -#define RTL8367C_REG_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1 0x0880 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY7_OFFSET 12 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY7_MASK 0x7000 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY6_OFFSET 8 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY6_MASK 0x700 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY5_OFFSET 4 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY5_MASK 0x70 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY4_OFFSET 0 -#define RTL8367C_QOS_PRIORITY_REMAPPING_IN_CPU_CTRL1_PRIORITY4_MASK 0x7 - -#define RTL8367C_REG_QOS_TRAP_PRIORITY0 0x0881 -#define RTL8367C_UNKNOWN_MC_PRIORTY_OFFSET 12 -#define RTL8367C_UNKNOWN_MC_PRIORTY_MASK 0x7000 -#define RTL8367C_SVLAN_PRIOIRTY_OFFSET 8 -#define RTL8367C_SVLAN_PRIOIRTY_MASK 0x700 -#define RTL8367C_OAM_PRIOIRTY_OFFSET 4 -#define RTL8367C_OAM_PRIOIRTY_MASK 0x70 -#define RTL8367C_DOT1X_PRIORTY_OFFSET 0 -#define RTL8367C_DOT1X_PRIORTY_MASK 0x7 - -#define RTL8367C_REG_QOS_TRAP_PRIORITY1 0x0882 -#define RTL8367C_DW8051_TRAP_PRI_OFFSET 4 -#define RTL8367C_DW8051_TRAP_PRI_MASK 0x70 -#define RTL8367C_EEELLDP_TRAP_PRI_OFFSET 0 -#define RTL8367C_EEELLDP_TRAP_PRI_MASK 0x7 - -#define RTL8367C_REG_MAX_LENGTH_CFG 0x0883 -#define RTL8367C_MAX_LENGTH_GIGA_OFFSET 8 -#define RTL8367C_MAX_LENGTH_GIGA_MASK 0xFF00 -#define RTL8367C_MAX_LENGTH_10_100M_OFFSET 0 -#define RTL8367C_MAX_LENGTH_10_100M_MASK 0xFF - -#define RTL8367C_REG_MAX_LEN_RX_TX 0x0884 -#define RTL8367C_MAX_LEN_RX_TX_OFFSET 0 -#define RTL8367C_MAX_LEN_RX_TX_MASK 0x3 - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0 0x0885 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0_QOS_ACL_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0_QOS_ACL_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0_QOS_PORT_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL0_QOS_PORT_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION2_CTRL1 0x0886 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL1_QOS_DOT1Q_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL1_QOS_DOT1Q_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL1_QOS_DSCP_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL1_QOS_DSCP_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION2_CTRL2 0x0887 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL2_QOS_CVLAN_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL2_QOS_CVLAN_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL2_QOS_SVLAN_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL2_QOS_SVLAN_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION2_CTRL3 0x0888 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL3_QOS_SA_WEIGHT_OFFSET 8 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL3_QOS_SA_WEIGHT_MASK 0xFF00 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL3_QOS_LUTFWD_WEIGHT_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_CTRL3_QOS_LUTFWD_WEIGHT_MASK 0xFF - -#define RTL8367C_REG_QOS_INTERNAL_PRIORITY_DECISION_IDX 0x0889 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_IDX_OFFSET 0 -#define RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_IDX_MASK 0x7FF - -#define RTL8367C_REG_MAX_LENGTH_CFG_EXT 0x088a -#define RTL8367C_MAX_LENGTH_GIGA_EXT_OFFSET 3 -#define RTL8367C_MAX_LENGTH_GIGA_EXT_MASK 0x38 -#define RTL8367C_MAX_LENGTH_10_100M_EXT_OFFSET 0 -#define RTL8367C_MAX_LENGTH_10_100M_EXT_MASK 0x7 - -#define RTL8367C_REG_MAX_LEN_RX_TX_CFG0 0x088c -#define RTL8367C_MAX_LEN_RX_TX_CFG0_OFFSET 0 -#define RTL8367C_MAX_LEN_RX_TX_CFG0_MASK 0x3FFF - -#define RTL8367C_REG_MAX_LEN_RX_TX_CFG1 0x088d -#define RTL8367C_MAX_LEN_RX_TX_CFG1_OFFSET 0 -#define RTL8367C_MAX_LEN_RX_TX_CFG1_MASK 0x3FFF - -#define RTL8367C_REG_UNDA_FLOODING_PMSK 0x0890 -#define RTL8367C_UNDA_FLOODING_PMSK_OFFSET 0 -#define RTL8367C_UNDA_FLOODING_PMSK_MASK 0x7FF - -#define RTL8367C_REG_UNMCAST_FLOADING_PMSK 0x0891 -#define RTL8367C_UNMCAST_FLOADING_PMSK_OFFSET 0 -#define RTL8367C_UNMCAST_FLOADING_PMSK_MASK 0x7FF - -#define RTL8367C_REG_BCAST_FLOADING_PMSK 0x0892 -#define RTL8367C_BCAST_FLOADING_PMSK_OFFSET 0 -#define RTL8367C_BCAST_FLOADING_PMSK_MASK 0x7FF - -#define RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL2 0x08a0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH7_OFFSET 14 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH7_MASK 0xC000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH6_OFFSET 12 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH6_MASK 0x3000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH5_OFFSET 10 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH5_MASK 0xC00 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH4_OFFSET 8 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH4_MASK 0x300 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH3_OFFSET 6 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH3_MASK 0xC0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH2_OFFSET 4 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH2_MASK 0x30 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH1_OFFSET 2 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH1_MASK 0xC -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH0_OFFSET 0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH0_MASK 0x3 - -#define RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL3 0x08a1 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH15_OFFSET 14 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH15_MASK 0xC000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH14_OFFSET 12 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH14_MASK 0x3000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH13_OFFSET 10 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH13_MASK 0xC00 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH12_OFFSET 8 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH12_MASK 0x300 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH11_OFFSET 6 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH11_MASK 0xC0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH10_OFFSET 4 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH10_MASK 0x30 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH9_OFFSET 2 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH9_MASK 0xC -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH8_OFFSET 0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH8_MASK 0x3 - -#define RTL8367C_REG_PORT_ISOLATION_PORT0_MASK 0x08a2 -#define RTL8367C_PORT_ISOLATION_PORT0_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT0_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT1_MASK 0x08a3 -#define RTL8367C_PORT_ISOLATION_PORT1_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT1_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT2_MASK 0x08a4 -#define RTL8367C_PORT_ISOLATION_PORT2_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT2_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT3_MASK 0x08a5 -#define RTL8367C_PORT_ISOLATION_PORT3_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT3_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT4_MASK 0x08a6 -#define RTL8367C_PORT_ISOLATION_PORT4_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT4_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT5_MASK 0x08a7 -#define RTL8367C_PORT_ISOLATION_PORT5_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT5_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT6_MASK 0x08a8 -#define RTL8367C_PORT_ISOLATION_PORT6_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT6_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT7_MASK 0x08a9 -#define RTL8367C_PORT_ISOLATION_PORT7_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT7_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT8_MASK 0x08aa -#define RTL8367C_PORT_ISOLATION_PORT8_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT8_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT9_MASK 0x08ab -#define RTL8367C_PORT_ISOLATION_PORT9_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT9_MASK_MASK 0x7FF - -#define RTL8367C_REG_PORT_ISOLATION_PORT10_MASK 0x08ac -#define RTL8367C_PORT_ISOLATION_PORT10_MASK_OFFSET 0 -#define RTL8367C_PORT_ISOLATION_PORT10_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_CTRL 0x08b4 -#define RTL8367C_FORCE_CTRL_OFFSET 0 -#define RTL8367C_FORCE_CTRL_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT0_MASK 0x08b5 -#define RTL8367C_FORCE_PORT0_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT0_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT1_MASK 0x08b6 -#define RTL8367C_FORCE_PORT1_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT1_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT2_MASK 0x08b7 -#define RTL8367C_FORCE_PORT2_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT2_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT3_MASK 0x08b8 -#define RTL8367C_FORCE_PORT3_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT3_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT4_MASK 0x08b9 -#define RTL8367C_FORCE_PORT4_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT4_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT5_MASK 0x08ba -#define RTL8367C_FORCE_PORT5_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT5_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT6_MASK 0x08bb -#define RTL8367C_FORCE_PORT6_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT6_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT7_MASK 0x08bc -#define RTL8367C_FORCE_PORT7_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT7_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT8_MASK 0x08bd -#define RTL8367C_FORCE_PORT8_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT8_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT9_MASK 0x08be -#define RTL8367C_FORCE_PORT9_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT9_MASK_MASK 0x7FF - -#define RTL8367C_REG_FORCE_PORT10_MASK 0x08bf -#define RTL8367C_FORCE_PORT10_MASK_OFFSET 0 -#define RTL8367C_FORCE_PORT10_MASK_MASK 0x7FF - -#define RTL8367C_REG_SOURCE_PORT_PERMIT 0x08c5 -#define RTL8367C_SOURCE_PORT_PERMIT_OFFSET 0 -#define RTL8367C_SOURCE_PORT_PERMIT_MASK 0x7FF - -#define RTL8367C_REG_IPMCAST_VLAN_LEAKY 0x08c6 -#define RTL8367C_IPMCAST_VLAN_LEAKY_OFFSET 0 -#define RTL8367C_IPMCAST_VLAN_LEAKY_MASK 0x7FF - -#define RTL8367C_REG_IPMCAST_PORTISO_LEAKY 0x08c7 -#define RTL8367C_IPMCAST_PORTISO_LEAKY_OFFSET 0 -#define RTL8367C_IPMCAST_PORTISO_LEAKY_MASK 0x7FF - -#define RTL8367C_REG_PORT_SECURITY_CTRL 0x08c8 -#define RTL8367C_UNKNOWN_UNICAST_DA_BEHAVE_OFFSET 6 -#define RTL8367C_UNKNOWN_UNICAST_DA_BEHAVE_MASK 0xC0 -#define RTL8367C_LUT_LEARN_OVER_ACT_OFFSET 4 -#define RTL8367C_LUT_LEARN_OVER_ACT_MASK 0x30 -#define RTL8367C_UNMATCHED_SA_BEHAVE_OFFSET 2 -#define RTL8367C_UNMATCHED_SA_BEHAVE_MASK 0xC -#define RTL8367C_UNKNOWN_SA_BEHAVE_OFFSET 0 -#define RTL8367C_UNKNOWN_SA_BEHAVE_MASK 0x3 - -#define RTL8367C_REG_UNKNOWN_IPV4_MULTICAST_CTRL0 0x08c9 -#define RTL8367C_PORT7_UNKNOWN_IP4_MCAST_OFFSET 14 -#define RTL8367C_PORT7_UNKNOWN_IP4_MCAST_MASK 0xC000 -#define RTL8367C_PORT6_UNKNOWN_IP4_MCAST_OFFSET 12 -#define RTL8367C_PORT6_UNKNOWN_IP4_MCAST_MASK 0x3000 -#define RTL8367C_PORT5_UNKNOWN_IP4_MCAST_OFFSET 10 -#define RTL8367C_PORT5_UNKNOWN_IP4_MCAST_MASK 0xC00 -#define RTL8367C_PORT4_UNKNOWN_IP4_MCAST_OFFSET 8 -#define RTL8367C_PORT4_UNKNOWN_IP4_MCAST_MASK 0x300 -#define RTL8367C_PORT3_UNKNOWN_IP4_MCAST_OFFSET 6 -#define RTL8367C_PORT3_UNKNOWN_IP4_MCAST_MASK 0xC0 -#define RTL8367C_PORT2_UNKNOWN_IP4_MCAST_OFFSET 4 -#define RTL8367C_PORT2_UNKNOWN_IP4_MCAST_MASK 0x30 -#define RTL8367C_PORT1_UNKNOWN_IP4_MCAST_OFFSET 2 -#define RTL8367C_PORT1_UNKNOWN_IP4_MCAST_MASK 0xC -#define RTL8367C_PORT0_UNKNOWN_IP4_MCAST_OFFSET 0 -#define RTL8367C_PORT0_UNKNOWN_IP4_MCAST_MASK 0x3 - -#define RTL8367C_REG_UNKNOWN_IPV4_MULTICAST_CTRL1 0x08ca -#define RTL8367C_PORT10_UNKNOWN_IP4_MCAST_OFFSET 4 -#define RTL8367C_PORT10_UNKNOWN_IP4_MCAST_MASK 0x30 -#define RTL8367C_PORT9_UNKNOWN_IP4_MCAST_OFFSET 2 -#define RTL8367C_PORT9_UNKNOWN_IP4_MCAST_MASK 0xC -#define RTL8367C_PORT8_UNKNOWN_IP4_MCAST_OFFSET 0 -#define RTL8367C_PORT8_UNKNOWN_IP4_MCAST_MASK 0x3 - -#define RTL8367C_REG_UNKNOWN_IPV6_MULTICAST_CTRL0 0x08cb -#define RTL8367C_PORT7_UNKNOWN_IP6_MCAST_OFFSET 14 -#define RTL8367C_PORT7_UNKNOWN_IP6_MCAST_MASK 0xC000 -#define RTL8367C_PORT6_UNKNOWN_IP6_MCAST_OFFSET 12 -#define RTL8367C_PORT6_UNKNOWN_IP6_MCAST_MASK 0x3000 -#define RTL8367C_PORT5_UNKNOWN_IP6_MCAST_OFFSET 10 -#define RTL8367C_PORT5_UNKNOWN_IP6_MCAST_MASK 0xC00 -#define RTL8367C_PORT4_UNKNOWN_IP6_MCAST_OFFSET 8 -#define RTL8367C_PORT4_UNKNOWN_IP6_MCAST_MASK 0x300 -#define RTL8367C_PORT3_UNKNOWN_IP6_MCAST_OFFSET 6 -#define RTL8367C_PORT3_UNKNOWN_IP6_MCAST_MASK 0xC0 -#define RTL8367C_PORT2_UNKNOWN_IP6_MCAST_OFFSET 4 -#define RTL8367C_PORT2_UNKNOWN_IP6_MCAST_MASK 0x30 -#define RTL8367C_PORT1_UNKNOWN_IP6_MCAST_OFFSET 2 -#define RTL8367C_PORT1_UNKNOWN_IP6_MCAST_MASK 0xC -#define RTL8367C_PORT0_UNKNOWN_IP6_MCAST_OFFSET 0 -#define RTL8367C_PORT0_UNKNOWN_IP6_MCAST_MASK 0x3 - -#define RTL8367C_REG_UNKNOWN_IPV6_MULTICAST_CTRL1 0x08cc -#define RTL8367C_PORT10_UNKNOWN_IP6_MCAST_OFFSET 4 -#define RTL8367C_PORT10_UNKNOWN_IP6_MCAST_MASK 0x30 -#define RTL8367C_PORT9_UNKNOWN_IP6_MCAST_OFFSET 2 -#define RTL8367C_PORT9_UNKNOWN_IP6_MCAST_MASK 0xC -#define RTL8367C_PORT8_UNKNOWN_IP6_MCAST_OFFSET 0 -#define RTL8367C_PORT8_UNKNOWN_IP6_MCAST_MASK 0x3 - -#define RTL8367C_REG_UNKNOWN_L2_MULTICAST_CTRL0 0x08cd -#define RTL8367C_PORT7_UNKNOWN_L2_MCAST_OFFSET 14 -#define RTL8367C_PORT7_UNKNOWN_L2_MCAST_MASK 0xC000 -#define RTL8367C_PORT6_UNKNOWN_L2_MCAST_OFFSET 12 -#define RTL8367C_PORT6_UNKNOWN_L2_MCAST_MASK 0x3000 -#define RTL8367C_PORT5_UNKNOWN_L2_MCAST_OFFSET 10 -#define RTL8367C_PORT5_UNKNOWN_L2_MCAST_MASK 0xC00 -#define RTL8367C_PORT4_UNKNOWN_L2_MCAST_OFFSET 8 -#define RTL8367C_PORT4_UNKNOWN_L2_MCAST_MASK 0x300 -#define RTL8367C_PORT3_UNKNOWN_L2_MCAST_OFFSET 6 -#define RTL8367C_PORT3_UNKNOWN_L2_MCAST_MASK 0xC0 -#define RTL8367C_PORT2_UNKNOWN_L2_MCAST_OFFSET 4 -#define RTL8367C_PORT2_UNKNOWN_L2_MCAST_MASK 0x30 -#define RTL8367C_PORT1_UNKNOWN_L2_MCAST_OFFSET 2 -#define RTL8367C_PORT1_UNKNOWN_L2_MCAST_MASK 0xC -#define RTL8367C_PORT0_UNKNOWN_L2_MCAST_OFFSET 0 -#define RTL8367C_PORT0_UNKNOWN_L2_MCAST_MASK 0x3 - -#define RTL8367C_REG_PORT_TRUNK_DROP_CTRL 0x08ce -#define RTL8367C_PORT_TRUNK_DROP_CTRL_OFFSET 0 -#define RTL8367C_PORT_TRUNK_DROP_CTRL_MASK 0x1 - -#define RTL8367C_REG_PORT_TRUNK_CTRL 0x08cf -#define RTL8367C_PORT_TRUNK_DUMB_OFFSET 8 -#define RTL8367C_PORT_TRUNK_DUMB_MASK 0x100 -#define RTL8367C_PORT_TRUNK_FLOOD_OFFSET 7 -#define RTL8367C_PORT_TRUNK_FLOOD_MASK 0x80 -#define RTL8367C_DPORT_HASH_OFFSET 6 -#define RTL8367C_DPORT_HASH_MASK 0x40 -#define RTL8367C_SPORT_HASH_OFFSET 5 -#define RTL8367C_SPORT_HASH_MASK 0x20 -#define RTL8367C_DIP_HASH_OFFSET 4 -#define RTL8367C_DIP_HASH_MASK 0x10 -#define RTL8367C_SIP_HASH_OFFSET 3 -#define RTL8367C_SIP_HASH_MASK 0x8 -#define RTL8367C_DMAC_HASH_OFFSET 2 -#define RTL8367C_DMAC_HASH_MASK 0x4 -#define RTL8367C_SMAC_HASH_OFFSET 1 -#define RTL8367C_SMAC_HASH_MASK 0x2 -#define RTL8367C_SPA_HASH_OFFSET 0 -#define RTL8367C_SPA_HASH_MASK 0x1 - -#define RTL8367C_REG_PORT_TRUNK_GROUP_MASK 0x08d0 -#define RTL8367C_PORT_TRUNK_GROUP2_MASK_OFFSET 8 -#define RTL8367C_PORT_TRUNK_GROUP2_MASK_MASK 0x300 -#define RTL8367C_PORT_TRUNK_GROUP1_MASK_OFFSET 4 -#define RTL8367C_PORT_TRUNK_GROUP1_MASK_MASK 0xF0 -#define RTL8367C_PORT_TRUNK_GROUP0_MASK_OFFSET 0 -#define RTL8367C_PORT_TRUNK_GROUP0_MASK_MASK 0xF - -#define RTL8367C_REG_PORT_TRUNK_FLOWCTRL 0x08d1 -#define RTL8367C_EN_FLOWCTRL_TG2_OFFSET 2 -#define RTL8367C_EN_FLOWCTRL_TG2_MASK 0x4 -#define RTL8367C_EN_FLOWCTRL_TG1_OFFSET 1 -#define RTL8367C_EN_FLOWCTRL_TG1_MASK 0x2 -#define RTL8367C_EN_FLOWCTRL_TG0_OFFSET 0 -#define RTL8367C_EN_FLOWCTRL_TG0_MASK 0x1 - -#define RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL0 0x08d2 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH7_OFFSET 14 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH7_MASK 0xC000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH6_OFFSET 12 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH6_MASK 0x3000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH5_OFFSET 10 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH5_MASK 0xC00 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH4_OFFSET 8 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH4_MASK 0x300 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH3_OFFSET 6 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH3_MASK 0xC0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH2_OFFSET 4 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH2_MASK 0x30 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH1_OFFSET 2 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH1_MASK 0xC -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH0_OFFSET 0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH0_MASK 0x3 - -#define RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL1 0x08d3 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH15_OFFSET 14 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH15_MASK 0xC000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH14_OFFSET 12 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH14_MASK 0x3000 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH13_OFFSET 10 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH13_MASK 0xC00 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH12_OFFSET 8 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH12_MASK 0x300 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH11_OFFSET 6 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH11_MASK 0xC0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH10_OFFSET 4 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH10_MASK 0x30 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH9_OFFSET 2 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH9_MASK 0xC -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH8_OFFSET 0 -#define RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH8_MASK 0x3 - -#define RTL8367C_REG_DOS_CFG 0x08d4 -#define RTL8367C_DROP_ICMPFRAGMENT_OFFSET 9 -#define RTL8367C_DROP_ICMPFRAGMENT_MASK 0x200 -#define RTL8367C_DROP_TCPFRAGERROR_OFFSET 8 -#define RTL8367C_DROP_TCPFRAGERROR_MASK 0x100 -#define RTL8367C_DROP_TCPSHORTHDR_OFFSET 7 -#define RTL8367C_DROP_TCPSHORTHDR_MASK 0x80 -#define RTL8367C_DROP_SYN1024_OFFSET 6 -#define RTL8367C_DROP_SYN1024_MASK 0x40 -#define RTL8367C_DROP_NULLSCAN_OFFSET 5 -#define RTL8367C_DROP_NULLSCAN_MASK 0x20 -#define RTL8367C_DROP_XMASCAN_OFFSET 4 -#define RTL8367C_DROP_XMASCAN_MASK 0x10 -#define RTL8367C_DROP_SYNFINSCAN_OFFSET 3 -#define RTL8367C_DROP_SYNFINSCAN_MASK 0x8 -#define RTL8367C_DROP_BLATATTACKS_OFFSET 2 -#define RTL8367C_DROP_BLATATTACKS_MASK 0x4 -#define RTL8367C_DROP_LANDATTACKS_OFFSET 1 -#define RTL8367C_DROP_LANDATTACKS_MASK 0x2 -#define RTL8367C_DROP_DAEQSA_OFFSET 0 -#define RTL8367C_DROP_DAEQSA_MASK 0x1 - -#define RTL8367C_REG_UNKNOWN_L2_MULTICAST_CTRL1 0x08d5 -#define RTL8367C_PORT10_UNKNOWN_L2_MCAST_OFFSET 4 -#define RTL8367C_PORT10_UNKNOWN_L2_MCAST_MASK 0x30 -#define RTL8367C_PORT9_UNKNOWN_L2_MCAST_OFFSET 2 -#define RTL8367C_PORT9_UNKNOWN_L2_MCAST_MASK 0xC -#define RTL8367C_PORT8_UNKNOWN_L2_MCAST_OFFSET 0 -#define RTL8367C_PORT8_UNKNOWN_L2_MCAST_MASK 0x3 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4 0x08d6 -#define RTL8367C_PORT9_VLAN_KEEP_MASK_OFFSET 8 -#define RTL8367C_PORT9_VLAN_KEEP_MASK_MASK 0xFF00 -#define RTL8367C_PORT8_VLAN_KEEP_MASK_OFFSET 0 -#define RTL8367C_PORT8_VLAN_KEEP_MASK_MASK 0xFF - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL5 0x08d7 -#define RTL8367C_VLAN_EGRESS_KEEP_CTRL5_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_KEEP_CTRL5_MASK 0xFF - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL0_EXT 0x08d8 -#define RTL8367C_PORT1_VLAN_KEEP_MASK_EXT_OFFSET 3 -#define RTL8367C_PORT1_VLAN_KEEP_MASK_EXT_MASK 0x38 -#define RTL8367C_PORT0_VLAN_KEEP_MASK_EXT_OFFSET 0 -#define RTL8367C_PORT0_VLAN_KEEP_MASK_EXT_MASK 0x7 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL1_EXT 0x08d9 -#define RTL8367C_PORT3_VLAN_KEEP_MASK_EXT_OFFSET 3 -#define RTL8367C_PORT3_VLAN_KEEP_MASK_EXT_MASK 0x38 -#define RTL8367C_PORT2_VLAN_KEEP_MASK_EXT_OFFSET 0 -#define RTL8367C_PORT2_VLAN_KEEP_MASK_EXT_MASK 0x7 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL2_EXT 0x08da -#define RTL8367C_PORT5_VLAN_KEEP_MASK_EXT_OFFSET 3 -#define RTL8367C_PORT5_VLAN_KEEP_MASK_EXT_MASK 0x38 -#define RTL8367C_PORT4_VLAN_KEEP_MASK_EXT_OFFSET 0 -#define RTL8367C_PORT4_VLAN_KEEP_MASK_EXT_MASK 0x7 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL3_EXT 0x08db -#define RTL8367C_PORT7_VLAN_KEEP_MASK_EXT_OFFSET 3 -#define RTL8367C_PORT7_VLAN_KEEP_MASK_EXT_MASK 0x38 -#define RTL8367C_PORT6_VLAN_KEEP_MASK_EXT_OFFSET 0 -#define RTL8367C_PORT6_VLAN_KEEP_MASK_EXT_MASK 0x7 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4_EXT 0x08dc -#define RTL8367C_PORT9_VLAN_KEEP_MASK_EXT_OFFSET 3 -#define RTL8367C_PORT9_VLAN_KEEP_MASK_EXT_MASK 0x38 -#define RTL8367C_PORT8_VLAN_KEEP_MASK_EXT_OFFSET 0 -#define RTL8367C_PORT8_VLAN_KEEP_MASK_EXT_MASK 0x7 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL5_EXT 0x08dd -#define RTL8367C_VLAN_EGRESS_KEEP_CTRL5_EXT_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_KEEP_CTRL5_EXT_MASK 0x7 - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL10 0x08de -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL10_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL10_MASK 0x7FF - -#define RTL8367C_REG_FPGA_VER_CEN 0x08e0 - -#define RTL8367C_REG_FPGA_TIME_CEN 0x08e1 - -#define RTL8367C_REG_FPGA_DATE_CEN 0x08e2 - -#define RTL8367C_REG_QOS_PORT_QUEUE_NUMBER_CTRL0 0x0900 -#define RTL8367C_PORT3_NUMBER_OFFSET 12 -#define RTL8367C_PORT3_NUMBER_MASK 0x7000 -#define RTL8367C_PORT2_NUMBER_OFFSET 8 -#define RTL8367C_PORT2_NUMBER_MASK 0x700 -#define RTL8367C_PORT1_NUMBER_OFFSET 4 -#define RTL8367C_PORT1_NUMBER_MASK 0x70 -#define RTL8367C_PORT0_NUMBER_OFFSET 0 -#define RTL8367C_PORT0_NUMBER_MASK 0x7 - -#define RTL8367C_REG_QOS_PORT_QUEUE_NUMBER_CTRL1 0x0901 -#define RTL8367C_PORT7_NUMBER_OFFSET 12 -#define RTL8367C_PORT7_NUMBER_MASK 0x7000 -#define RTL8367C_PORT6_NUMBER_OFFSET 8 -#define RTL8367C_PORT6_NUMBER_MASK 0x700 -#define RTL8367C_PORT5_NUMBER_OFFSET 4 -#define RTL8367C_PORT5_NUMBER_MASK 0x70 -#define RTL8367C_PORT4_NUMBER_OFFSET 0 -#define RTL8367C_PORT4_NUMBER_MASK 0x7 - -#define RTL8367C_REG_QOS_PORT_QUEUE_NUMBER_CTRL2 0x0902 -#define RTL8367C_PORT10_NUMBER_OFFSET 8 -#define RTL8367C_PORT10_NUMBER_MASK 0x700 -#define RTL8367C_PORT9_NUMBER_OFFSET 4 -#define RTL8367C_PORT9_NUMBER_MASK 0x70 -#define RTL8367C_PORT8_NUMBER_OFFSET 0 -#define RTL8367C_PORT8_NUMBER_MASK 0x7 - -#define RTL8367C_REG_QOS_1Q_PRIORITY_TO_QID_CTRL0 0x0904 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_1Q_PRIORITY_TO_QID_CTRL1 0x0905 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_1Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_2Q_PRIORITY_TO_QID_CTRL0 0x0906 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_2Q_PRIORITY_TO_QID_CTRL1 0x0907 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_2Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_3Q_PRIORITY_TO_QID_CTRL0 0x0908 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_3Q_PRIORITY_TO_QID_CTRL1 0x0909 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_3Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_4Q_PRIORITY_TO_QID_CTRL0 0x090a -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_4Q_PRIORITY_TO_QID_CTRL1 0x090b -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_4Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_5Q_PRIORITY_TO_QID_CTRL0 0x090c -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_5Q_PRIORITY_TO_QID_CTRL1 0x090d -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_5Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_6Q_PRIORITY_TO_QID_CTRL0 0x090e -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_6Q_PRIORITY_TO_QID_CTRL1 0x090f -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_6Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_7Q_PRIORITY_TO_QID_CTRL0 0x0910 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_7Q_PRIORITY_TO_QID_CTRL1 0x0911 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_7Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_8Q_PRIORITY_TO_QID_CTRL0 0x0912 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_OFFSET 12 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY3_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_OFFSET 8 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY2_TO_QID_MASK 0x700 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_OFFSET 4 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY1_TO_QID_MASK 0x70 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_OFFSET 0 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL0_PRIORITY0_TO_QID_MASK 0x7 - -#define RTL8367C_REG_QOS_8Q_PRIORITY_TO_QID_CTRL1 0x0913 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_OFFSET 12 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY7_TO_QID_MASK 0x7000 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_OFFSET 8 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY6_TO_QID_MASK 0x700 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_OFFSET 4 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY5_TO_QID_MASK 0x70 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_OFFSET 0 -#define RTL8367C_QOS_8Q_PRIORITY_TO_QID_CTRL1_PRIORITY4_TO_QID_MASK 0x7 - -#define RTL8367C_REG_HIGHPRI_INDICATOR 0x0915 -#define RTL8367C_PORT10_INDICATOR_OFFSET 10 -#define RTL8367C_PORT10_INDICATOR_MASK 0x400 -#define RTL8367C_PORT9_INDICATOR_OFFSET 9 -#define RTL8367C_PORT9_INDICATOR_MASK 0x200 -#define RTL8367C_PORT8_INDICATOR_OFFSET 8 -#define RTL8367C_PORT8_INDICATOR_MASK 0x100 -#define RTL8367C_PORT7_INDICATOR_OFFSET 7 -#define RTL8367C_PORT7_INDICATOR_MASK 0x80 -#define RTL8367C_PORT6_INDICATOR_OFFSET 6 -#define RTL8367C_PORT6_INDICATOR_MASK 0x40 -#define RTL8367C_PORT5_INDICATOR_OFFSET 5 -#define RTL8367C_PORT5_INDICATOR_MASK 0x20 -#define RTL8367C_PORT4_INDICATOR_OFFSET 4 -#define RTL8367C_PORT4_INDICATOR_MASK 0x10 -#define RTL8367C_PORT3_INDICATOR_OFFSET 3 -#define RTL8367C_PORT3_INDICATOR_MASK 0x8 -#define RTL8367C_PORT2_INDICATOR_OFFSET 2 -#define RTL8367C_PORT2_INDICATOR_MASK 0x4 -#define RTL8367C_PORT1_INDICATOR_OFFSET 1 -#define RTL8367C_PORT1_INDICATOR_MASK 0x2 -#define RTL8367C_PORT0_INDICATOR_OFFSET 0 -#define RTL8367C_PORT0_INDICATOR_MASK 0x1 - -#define RTL8367C_REG_HIGHPRI_CFG 0x0916 -#define RTL8367C_HIGHPRI_CFG_OFFSET 0 -#define RTL8367C_HIGHPRI_CFG_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL0 0x0917 -#define RTL8367C_PORT1_DEBUG_INFO_OFFSET 8 -#define RTL8367C_PORT1_DEBUG_INFO_MASK 0xFF00 -#define RTL8367C_PORT0_DEBUG_INFO_OFFSET 0 -#define RTL8367C_PORT0_DEBUG_INFO_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL1 0x0918 -#define RTL8367C_PORT3_DEBUG_INFO_OFFSET 8 -#define RTL8367C_PORT3_DEBUG_INFO_MASK 0xFF00 -#define RTL8367C_PORT2_DEBUG_INFO_OFFSET 0 -#define RTL8367C_PORT2_DEBUG_INFO_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL2 0x0919 -#define RTL8367C_PORT5_DEBUG_INFO_OFFSET 8 -#define RTL8367C_PORT5_DEBUG_INFO_MASK 0xFF00 -#define RTL8367C_PORT4_DEBUG_INFO_OFFSET 0 -#define RTL8367C_PORT4_DEBUG_INFO_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL3 0x091a -#define RTL8367C_PORT7_DEBUG_INFO_OFFSET 8 -#define RTL8367C_PORT7_DEBUG_INFO_MASK 0xFF00 -#define RTL8367C_PORT6_DEBUG_INFO_OFFSET 0 -#define RTL8367C_PORT6_DEBUG_INFO_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL4 0x091b -#define RTL8367C_PORT9_DEBUG_INFO_OFFSET 8 -#define RTL8367C_PORT9_DEBUG_INFO_MASK 0xFF00 -#define RTL8367C_PORT8_DEBUG_INFO_OFFSET 0 -#define RTL8367C_PORT8_DEBUG_INFO_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL5 0x091c -#define RTL8367C_PORT10_DEBUG_INFO_OFFSET 0 -#define RTL8367C_PORT10_DEBUG_INFO_MASK 0xFF - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL6 0x091d -#define RTL8367C_PORT7_DEBUG_INDICATOR_OFFSET 14 -#define RTL8367C_PORT7_DEBUG_INDICATOR_MASK 0xC000 -#define RTL8367C_PORT6_DEBUG_INDICATOR_OFFSET 12 -#define RTL8367C_PORT6_DEBUG_INDICATOR_MASK 0x3000 -#define RTL8367C_PORT5_DEBUG_INDICATOR_OFFSET 10 -#define RTL8367C_PORT5_DEBUG_INDICATOR_MASK 0xC00 -#define RTL8367C_PORT4_DEBUG_INDICATOR_OFFSET 8 -#define RTL8367C_PORT4_DEBUG_INDICATOR_MASK 0x300 -#define RTL8367C_PORT3_DEBUG_INDICATOR_OFFSET 6 -#define RTL8367C_PORT3_DEBUG_INDICATOR_MASK 0xC0 -#define RTL8367C_PORT2_DEBUG_INDICATOR_OFFSET 4 -#define RTL8367C_PORT2_DEBUG_INDICATOR_MASK 0x30 -#define RTL8367C_PORT1_DEBUG_INDICATOR_OFFSET 2 -#define RTL8367C_PORT1_DEBUG_INDICATOR_MASK 0xC -#define RTL8367C_PORT0_DEBUG_INDICATOR_OFFSET 0 -#define RTL8367C_PORT0_DEBUG_INDICATOR_MASK 0x3 - -#define RTL8367C_REG_PORT_DEBUG_INFO_CTRL7 0x091e -#define RTL8367C_PORT10_DEBUG_INDICATOR_OFFSET 4 -#define RTL8367C_PORT10_DEBUG_INDICATOR_MASK 0x30 -#define RTL8367C_PORT9_DEBUG_INDICATOR_OFFSET 2 -#define RTL8367C_PORT9_DEBUG_INDICATOR_MASK 0xC -#define RTL8367C_PORT8_DEBUG_INDICATOR_OFFSET 0 -#define RTL8367C_PORT8_DEBUG_INDICATOR_MASK 0x3 - -#define RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL0 0x0930 -#define RTL8367C_PORT1_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT1_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT0_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT0_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL1 0x0931 -#define RTL8367C_PORT3_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT3_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT2_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT2_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL2 0x0932 -#define RTL8367C_PORT5_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT5_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT4_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT4_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL3 0x0933 -#define RTL8367C_PORT7_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT7_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT6_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT6_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL4 0x0934 -#define RTL8367C_PORT9_QUEUE_MASK_OFFSET 8 -#define RTL8367C_PORT9_QUEUE_MASK_MASK 0xFF00 -#define RTL8367C_PORT8_QUEUE_MASK_OFFSET 0 -#define RTL8367C_PORT8_QUEUE_MASK_MASK 0xFF - -#define RTL8367C_REG_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL5 0x0935 -#define RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL5_OFFSET 0 -#define RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_CTRL5_MASK 0xFF - -#define RTL8367C_REG_FLOWCRTL_EGRESS_PORT_ENABLE 0x0938 -#define RTL8367C_FLOWCRTL_EGRESS_PORT_ENABLE_OFFSET 0 -#define RTL8367C_FLOWCRTL_EGRESS_PORT_ENABLE_MASK 0xFF - -#define RTL8367C_REG_EAV_CTRL 0x0939 -#define RTL8367C_EAV_TRAP_CPU_OFFSET 1 -#define RTL8367C_EAV_TRAP_CPU_MASK 0x2 -#define RTL8367C_EAV_TRAP_8051_OFFSET 0 -#define RTL8367C_EAV_TRAP_8051_MASK 0x1 - -#define RTL8367C_REG_UNTAG_DSCP_PRI_CFG 0x093a -#define RTL8367C_UNTAG_DSCP_PRI_CFG_OFFSET 0 -#define RTL8367C_UNTAG_DSCP_PRI_CFG_MASK 0x1 - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL0 0x093b -#define RTL8367C_PORT1_VLAN_KEEP_MASK_OFFSET 8 -#define RTL8367C_PORT1_VLAN_KEEP_MASK_MASK 0xFF00 -#define RTL8367C_PORT0_VLAN_KEEP_MASK_OFFSET 0 -#define RTL8367C_PORT0_VLAN_KEEP_MASK_MASK 0xFF - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL1 0x093c -#define RTL8367C_PORT3_VLAN_KEEP_MASK_OFFSET 8 -#define RTL8367C_PORT3_VLAN_KEEP_MASK_MASK 0xFF00 -#define RTL8367C_PORT2_VLAN_KEEP_MASK_OFFSET 0 -#define RTL8367C_PORT2_VLAN_KEEP_MASK_MASK 0xFF - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL2 0x093d -#define RTL8367C_PORT5_VLAN_KEEP_MASK_OFFSET 8 -#define RTL8367C_PORT5_VLAN_KEEP_MASK_MASK 0xFF00 -#define RTL8367C_PORT4_VLAN_KEEP_MASK_OFFSET 0 -#define RTL8367C_PORT4_VLAN_KEEP_MASK_MASK 0xFF - -#define RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL3 0x093e -#define RTL8367C_PORT7_VLAN_KEEP_MASK_OFFSET 8 -#define RTL8367C_PORT7_VLAN_KEEP_MASK_MASK 0xFF00 -#define RTL8367C_PORT6_VLAN_KEEP_MASK_OFFSET 0 -#define RTL8367C_PORT6_VLAN_KEEP_MASK_MASK 0xFF - -#define RTL8367C_REG_VLAN_TRANSPARENT_EN_CFG 0x093f -#define RTL8367C_VLAN_TRANSPARENT_EN_CFG_OFFSET 0 -#define RTL8367C_VLAN_TRANSPARENT_EN_CFG_MASK 0x1 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY0_H 0x0940 -#define RTL8367C_IPMC_GROUP_ENTRY0_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY0_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY0_L 0x0941 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY1_H 0x0942 -#define RTL8367C_IPMC_GROUP_ENTRY1_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY1_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY1_L 0x0943 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY2_H 0x0944 -#define RTL8367C_IPMC_GROUP_ENTRY2_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY2_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY2_L 0x0945 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY3_H 0x0946 -#define RTL8367C_IPMC_GROUP_ENTRY3_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY3_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY3_L 0x0947 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY4_H 0x0948 -#define RTL8367C_IPMC_GROUP_ENTRY4_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY4_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY4_L 0x0949 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY5_H 0x094a -#define RTL8367C_IPMC_GROUP_ENTRY5_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY5_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY5_L 0x094b - -#define RTL8367C_REG_IPMC_GROUP_ENTRY6_H 0x094c -#define RTL8367C_IPMC_GROUP_ENTRY6_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY6_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY6_L 0x094d - -#define RTL8367C_REG_IPMC_GROUP_ENTRY7_H 0x094e -#define RTL8367C_IPMC_GROUP_ENTRY7_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY7_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY7_L 0x094f - -#define RTL8367C_REG_IPMC_GROUP_ENTRY8_H 0x0950 -#define RTL8367C_IPMC_GROUP_ENTRY8_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY8_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY8_L 0x0951 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY9_H 0x0952 -#define RTL8367C_IPMC_GROUP_ENTRY9_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY9_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY9_L 0x0953 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY10_H 0x0954 -#define RTL8367C_IPMC_GROUP_ENTRY10_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY10_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY10_L 0x0955 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY11_H 0x0956 -#define RTL8367C_IPMC_GROUP_ENTRY11_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY11_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY11_L 0x0957 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY12_H 0x0958 -#define RTL8367C_IPMC_GROUP_ENTRY12_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY12_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY12_L 0x0959 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY13_H 0x095a -#define RTL8367C_IPMC_GROUP_ENTRY13_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY13_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY13_L 0x095b - -#define RTL8367C_REG_IPMC_GROUP_ENTRY14_H 0x095c -#define RTL8367C_IPMC_GROUP_ENTRY14_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY14_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY14_L 0x095d - -#define RTL8367C_REG_IPMC_GROUP_ENTRY15_H 0x095e -#define RTL8367C_IPMC_GROUP_ENTRY15_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY15_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY15_L 0x095f - -#define RTL8367C_REG_IPMC_GROUP_ENTRY16_H 0x0960 -#define RTL8367C_IPMC_GROUP_ENTRY16_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY16_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY16_L 0x0961 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY17_H 0x0962 -#define RTL8367C_IPMC_GROUP_ENTRY17_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY17_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY17_L 0x0963 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY18_H 0x0964 -#define RTL8367C_IPMC_GROUP_ENTRY18_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY18_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY18_L 0x0965 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY19_H 0x0966 -#define RTL8367C_IPMC_GROUP_ENTRY19_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY19_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY19_L 0x0967 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY20_H 0x0968 -#define RTL8367C_IPMC_GROUP_ENTRY20_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY20_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY20_L 0x0969 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY21_H 0x096a -#define RTL8367C_IPMC_GROUP_ENTRY21_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY21_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY21_L 0x096b - -#define RTL8367C_REG_IPMC_GROUP_ENTRY22_H 0x096c -#define RTL8367C_IPMC_GROUP_ENTRY22_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY22_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY22_L 0x096d - -#define RTL8367C_REG_IPMC_GROUP_ENTRY23_H 0x096e -#define RTL8367C_IPMC_GROUP_ENTRY23_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY23_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY23_L 0x096f - -#define RTL8367C_REG_IPMC_GROUP_ENTRY24_H 0x0970 -#define RTL8367C_IPMC_GROUP_ENTRY24_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY24_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY24_L 0x0971 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY25_H 0x0972 -#define RTL8367C_IPMC_GROUP_ENTRY25_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY25_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY25_L 0x0973 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY26_H 0x0974 -#define RTL8367C_IPMC_GROUP_ENTRY26_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY26_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY26_L 0x0975 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY27_H 0x0976 -#define RTL8367C_IPMC_GROUP_ENTRY27_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY27_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY27_L 0x0977 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY28_H 0x0978 -#define RTL8367C_IPMC_GROUP_ENTRY28_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY28_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY28_L 0x0979 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY29_H 0x097a -#define RTL8367C_IPMC_GROUP_ENTRY29_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY29_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY29_L 0x097b - -#define RTL8367C_REG_IPMC_GROUP_ENTRY30_H 0x097c -#define RTL8367C_IPMC_GROUP_ENTRY30_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY30_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY30_L 0x097d - -#define RTL8367C_REG_IPMC_GROUP_ENTRY31_H 0x097e -#define RTL8367C_IPMC_GROUP_ENTRY31_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY31_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY31_L 0x097f - -#define RTL8367C_REG_IPMC_GROUP_ENTRY32_H 0x0980 -#define RTL8367C_IPMC_GROUP_ENTRY32_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY32_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY32_L 0x0981 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY33_H 0x0982 -#define RTL8367C_IPMC_GROUP_ENTRY33_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY33_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY33_L 0x0983 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY34_H 0x0984 -#define RTL8367C_IPMC_GROUP_ENTRY34_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY34_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY34_L 0x0985 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY35_H 0x0986 -#define RTL8367C_IPMC_GROUP_ENTRY35_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY35_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY35_L 0x0987 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY36_H 0x0988 -#define RTL8367C_IPMC_GROUP_ENTRY36_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY36_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY36_L 0x0989 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY37_H 0x098a -#define RTL8367C_IPMC_GROUP_ENTRY37_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY37_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY37_L 0x098b - -#define RTL8367C_REG_IPMC_GROUP_ENTRY38_H 0x098c -#define RTL8367C_IPMC_GROUP_ENTRY38_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY38_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY38_L 0x098d - -#define RTL8367C_REG_IPMC_GROUP_ENTRY39_H 0x098e -#define RTL8367C_IPMC_GROUP_ENTRY39_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY39_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY39_L 0x098f - -#define RTL8367C_REG_IPMC_GROUP_ENTRY40_H 0x0990 -#define RTL8367C_IPMC_GROUP_ENTRY40_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY40_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY40_L 0x0991 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY41_H 0x0992 -#define RTL8367C_IPMC_GROUP_ENTRY41_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY41_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY41_L 0x0993 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY42_H 0x0994 -#define RTL8367C_IPMC_GROUP_ENTRY42_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY42_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY42_L 0x0995 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY43_H 0x0996 -#define RTL8367C_IPMC_GROUP_ENTRY43_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY43_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY43_L 0x0997 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY44_H 0x0998 -#define RTL8367C_IPMC_GROUP_ENTRY44_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY44_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY44_L 0x0999 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY45_H 0x099a -#define RTL8367C_IPMC_GROUP_ENTRY45_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY45_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY45_L 0x099b - -#define RTL8367C_REG_IPMC_GROUP_ENTRY46_H 0x099c -#define RTL8367C_IPMC_GROUP_ENTRY46_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY46_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY46_L 0x099d - -#define RTL8367C_REG_IPMC_GROUP_ENTRY47_H 0x099e -#define RTL8367C_IPMC_GROUP_ENTRY47_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY47_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY47_L 0x099f - -#define RTL8367C_REG_IPMC_GROUP_ENTRY48_H 0x09a0 -#define RTL8367C_IPMC_GROUP_ENTRY48_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY48_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY48_L 0x09a1 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY49_H 0x09a2 -#define RTL8367C_IPMC_GROUP_ENTRY49_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY49_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY49_L 0x09a3 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY50_H 0x09a4 -#define RTL8367C_IPMC_GROUP_ENTRY50_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY50_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY50_L 0x09a5 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY51_H 0x09a6 -#define RTL8367C_IPMC_GROUP_ENTRY51_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY51_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY51_L 0x09a7 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY52_H 0x09a8 -#define RTL8367C_IPMC_GROUP_ENTRY52_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY52_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY52_L 0x09a9 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY53_H 0x09aa -#define RTL8367C_IPMC_GROUP_ENTRY53_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY53_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY53_L 0x09ab - -#define RTL8367C_REG_IPMC_GROUP_ENTRY54_H 0x09ac -#define RTL8367C_IPMC_GROUP_ENTRY54_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY54_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY54_L 0x09ad - -#define RTL8367C_REG_IPMC_GROUP_ENTRY55_H 0x09ae -#define RTL8367C_IPMC_GROUP_ENTRY55_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY55_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY55_L 0x09af - -#define RTL8367C_REG_IPMC_GROUP_ENTRY56_H 0x09b0 -#define RTL8367C_IPMC_GROUP_ENTRY56_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY56_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY56_L 0x09b1 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY57_H 0x09b2 -#define RTL8367C_IPMC_GROUP_ENTRY57_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY57_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY57_L 0x09b3 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY58_H 0x09b4 -#define RTL8367C_IPMC_GROUP_ENTRY58_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY58_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY58_L 0x09b5 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY59_H 0x09b6 -#define RTL8367C_IPMC_GROUP_ENTRY59_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY59_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY59_L 0x09b7 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY60_H 0x09b8 -#define RTL8367C_IPMC_GROUP_ENTRY60_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY60_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY60_L 0x09b9 - -#define RTL8367C_REG_IPMC_GROUP_ENTRY61_H 0x09ba -#define RTL8367C_IPMC_GROUP_ENTRY61_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY61_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY61_L 0x09bb - -#define RTL8367C_REG_IPMC_GROUP_ENTRY62_H 0x09bc -#define RTL8367C_IPMC_GROUP_ENTRY62_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY62_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY62_L 0x09bd - -#define RTL8367C_REG_IPMC_GROUP_ENTRY63_H 0x09be -#define RTL8367C_IPMC_GROUP_ENTRY63_H_OFFSET 0 -#define RTL8367C_IPMC_GROUP_ENTRY63_H_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_ENTRY63_L 0x09bf - -#define RTL8367C_REG_UNKNOWN_UNICAST_DA_PORT_BEHAVE 0x09C0 -#define RTL8367C_Port7_ACTION_OFFSET 14 -#define RTL8367C_Port7_ACTION_MASK 0xC000 -#define RTL8367C_Port6_ACTION_OFFSET 12 -#define RTL8367C_Port6_ACTION_MASK 0x3000 -#define RTL8367C_Port5_ACTION_OFFSET 10 -#define RTL8367C_Port5_ACTION_MASK 0xC00 -#define RTL8367C_Port4_ACTION_OFFSET 8 -#define RTL8367C_Port4_ACTION_MASK 0x300 -#define RTL8367C_Port3_ACTION_OFFSET 6 -#define RTL8367C_Port3_ACTION_MASK 0xC0 -#define RTL8367C_Port2_ACTION_OFFSET 4 -#define RTL8367C_Port2_ACTION_MASK 0x30 -#define RTL8367C_Port1_ACTION_OFFSET 2 -#define RTL8367C_Port1_ACTION_MASK 0xC -#define RTL8367C_Port0_ACTION_OFFSET 0 -#define RTL8367C_Port0_ACTION_MASK 0x3 - -#define RTL8367C_REG_MIRROR_CTRL3 0x09C1 -#define RTL8367C_MIRROR_ACL_OVERRIDE_EN_OFFSET 2 -#define RTL8367C_MIRROR_ACL_OVERRIDE_EN_MASK 0x4 -#define RTL8367C_MIRROR_TX_OVERRIDE_EN_OFFSET 1 -#define RTL8367C_MIRROR_TX_OVERRIDE_EN_MASK 0x2 -#define RTL8367C_MIRROR_RX_OVERRIDE_EN_OFFSET 0 -#define RTL8367C_MIRROR_RX_OVERRIDE_EN_MASK 0x1 - -#define RTL8367C_REG_DPM_DUMMY02 0x09C2 - -#define RTL8367C_REG_DPM_DUMMY03 0x09C3 - -#define RTL8367C_REG_DPM_DUMMY04 0x09C4 - -#define RTL8367C_REG_DPM_DUMMY05 0x09C5 - -#define RTL8367C_REG_DPM_DUMMY06 0x09C6 - -#define RTL8367C_REG_DPM_DUMMY07 0x09C7 - -#define RTL8367C_REG_DPM_DUMMY08 0x09C8 - -#define RTL8367C_REG_DPM_DUMMY09 0x09C9 - -#define RTL8367C_REG_DPM_DUMMY10 0x09CA - -#define RTL8367C_REG_DPM_DUMMY11 0x09CB - -#define RTL8367C_REG_DPM_DUMMY12 0x09CC - -#define RTL8367C_REG_DPM_DUMMY13 0x09CD - -#define RTL8367C_REG_DPM_DUMMY14 0x09CE - -#define RTL8367C_REG_DPM_DUMMY15 0x09CF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL0 0x09D0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL0_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL0_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL1 0x09D1 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL1_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL1_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL2 0x09D2 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL2_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL2_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL3 0x09D3 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL3_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL3_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL4 0x09D4 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL4_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL4_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL5 0x09D5 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL5_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL5_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL6 0x09D6 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL6_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL6_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL7 0x09D7 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL7_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL7_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL8 0x09D8 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL8_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL8_MASK 0x7FF - -#define RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL9 0x09D9 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL9_OFFSET 0 -#define RTL8367C_VLAN_EGRESS_TRANS_CTRL9_MASK 0x7FF - -#define RTL8367C_REG_MIRROR_CTRL2 0x09DA -#define RTL8367C_MIRROR_REALKEEP_EN_OFFSET 4 -#define RTL8367C_MIRROR_REALKEEP_EN_MASK 0x10 -#define RTL8367C_MIRROR_RX_ISOLATION_LEAKY_OFFSET 3 -#define RTL8367C_MIRROR_RX_ISOLATION_LEAKY_MASK 0x8 -#define RTL8367C_MIRROR_TX_ISOLATION_LEAKY_OFFSET 2 -#define RTL8367C_MIRROR_TX_ISOLATION_LEAKY_MASK 0x4 -#define RTL8367C_MIRROR_RX_VLAN_LEAKY_OFFSET 1 -#define RTL8367C_MIRROR_RX_VLAN_LEAKY_MASK 0x2 -#define RTL8367C_MIRROR_TX_VLAN_LEAKY_OFFSET 0 -#define RTL8367C_MIRROR_TX_VLAN_LEAKY_MASK 0x1 - -#define RTL8367C_REG_OUTPUT_DROP_CFG 0x09DB -#define RTL8367C_ENABLE_PMASK_EXT_OFFSET 13 -#define RTL8367C_ENABLE_PMASK_EXT_MASK 0xE000 -#define RTL8367C_ENABLE_BC_OFFSET 12 -#define RTL8367C_ENABLE_BC_MASK 0x1000 -#define RTL8367C_ENABLE_MC_OFFSET 11 -#define RTL8367C_ENABLE_MC_MASK 0x800 -#define RTL8367C_ENABLE_UC_OFFSET 10 -#define RTL8367C_ENABLE_UC_MASK 0x400 -#define RTL8367C_ENABLE_PMASK_OFFSET 0 -#define RTL8367C_ENABLE_PMASK_MASK 0xFF - -#define RTL8367C_REG_UNKNOWN_UNICAST_DA_PORT_BEHAVE_EXT 0x09DC -#define RTL8367C_PORT10_ACTION_OFFSET 4 -#define RTL8367C_PORT10_ACTION_MASK 0x30 -#define RTL8367C_PORT9_ACTION_OFFSET 2 -#define RTL8367C_PORT9_ACTION_MASK 0xC -#define RTL8367C_PORT8_ACTION_OFFSET 0 -#define RTL8367C_PORT8_ACTION_MASK 0x3 - -#define RTL8367C_REG_RMK_CFG_SEL_CTRL 0x09DF -#define RTL8367C_RMK_1Q_CFG_SEL_OFFSET 2 -#define RTL8367C_RMK_1Q_CFG_SEL_MASK 0x4 -#define RTL8367C_RMK_DSCP_CFG_SEL_OFFSET 0 -#define RTL8367C_RMK_DSCP_CFG_SEL_MASK 0x3 - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL0 0x09E0 -#define RTL8367C_DSCP1_DSCP_OFFSET 8 -#define RTL8367C_DSCP1_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP0_DSCP_OFFSET 0 -#define RTL8367C_DSCP0_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL1 0x09E1 -#define RTL8367C_DSCP3_DSCP_OFFSET 8 -#define RTL8367C_DSCP3_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP2_DSCP_OFFSET 0 -#define RTL8367C_DSCP2_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL2 0x09E2 -#define RTL8367C_DSCP5_DSCP_OFFSET 8 -#define RTL8367C_DSCP5_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP4_DSCP_OFFSET 0 -#define RTL8367C_DSCP4_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL3 0x09E3 -#define RTL8367C_DSCP7_DSCP_OFFSET 8 -#define RTL8367C_DSCP7_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP6_DSCP_OFFSET 0 -#define RTL8367C_DSCP6_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL4 0x09E4 -#define RTL8367C_DSCP9_DSCP_OFFSET 8 -#define RTL8367C_DSCP9_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP8_DSCP_OFFSET 0 -#define RTL8367C_DSCP8_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL5 0x09E5 -#define RTL8367C_DSCP11_DSCP_OFFSET 8 -#define RTL8367C_DSCP11_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP10_DSCP_OFFSET 0 -#define RTL8367C_DSCP10_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL6 0x09E6 -#define RTL8367C_DSCP13_DSCP_OFFSET 8 -#define RTL8367C_DSCP13_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP12_DSCP_OFFSET 0 -#define RTL8367C_DSCP12_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL7 0x09E7 -#define RTL8367C_DSCP15_DSCP_OFFSET 8 -#define RTL8367C_DSCP15_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP14_DSCP_OFFSET 0 -#define RTL8367C_DSCP14_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL8 0x09E8 -#define RTL8367C_DSCP17_DSCP_OFFSET 8 -#define RTL8367C_DSCP17_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP16_DSCP_OFFSET 0 -#define RTL8367C_DSCP16_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL9 0x09E9 -#define RTL8367C_DSCP19_DSCP_OFFSET 8 -#define RTL8367C_DSCP19_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP18_DSCP_OFFSET 0 -#define RTL8367C_DSCP18_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL10 0x09EA -#define RTL8367C_DSCP21_DSCP_OFFSET 8 -#define RTL8367C_DSCP21_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP20_DSCP_OFFSET 0 -#define RTL8367C_DSCP20_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL11 0x09EB -#define RTL8367C_DSCP23_DSCP_OFFSET 8 -#define RTL8367C_DSCP23_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP22_DSCP_OFFSET 0 -#define RTL8367C_DSCP22_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL12 0x09EC -#define RTL8367C_DSCP25_DSCP_OFFSET 8 -#define RTL8367C_DSCP25_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP24_DSCP_OFFSET 0 -#define RTL8367C_DSCP24_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL13 0x09ED -#define RTL8367C_DSCP27_DSCP_OFFSET 8 -#define RTL8367C_DSCP27_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP26_DSCP_OFFSET 0 -#define RTL8367C_DSCP26_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL14 0x09EE -#define RTL8367C_DSCP29_DSCP_OFFSET 8 -#define RTL8367C_DSCP29_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP28_DSCP_OFFSET 0 -#define RTL8367C_DSCP28_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL15 0x09EF -#define RTL8367C_DSCP31_DSCP_OFFSET 8 -#define RTL8367C_DSCP31_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP30_DSCP_OFFSET 0 -#define RTL8367C_DSCP30_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL16 0x09F0 -#define RTL8367C_DSCP33_DSCP_OFFSET 8 -#define RTL8367C_DSCP33_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP32_DSCP_OFFSET 0 -#define RTL8367C_DSCP32_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL17 0x09F1 -#define RTL8367C_DSCP35_DSCP_OFFSET 8 -#define RTL8367C_DSCP35_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP34_DSCP_OFFSET 0 -#define RTL8367C_DSCP34_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL18 0x09F2 -#define RTL8367C_DSCP37_DSCP_OFFSET 8 -#define RTL8367C_DSCP37_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP36_DSCP_OFFSET 0 -#define RTL8367C_DSCP36_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL19 0x09F3 -#define RTL8367C_DSCP39_DSCP_OFFSET 8 -#define RTL8367C_DSCP39_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP38_DSCP_OFFSET 0 -#define RTL8367C_DSCP38_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL20 0x09F4 -#define RTL8367C_DSCP41_DSCP_OFFSET 8 -#define RTL8367C_DSCP41_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP40_DSCP_OFFSET 0 -#define RTL8367C_DSCP40_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL21 0x09F5 -#define RTL8367C_DSCP43_DSCP_OFFSET 8 -#define RTL8367C_DSCP43_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP42_DSCP_OFFSET 0 -#define RTL8367C_DSCP42_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL22 0x09F6 -#define RTL8367C_DSCP45_DSCP_OFFSET 8 -#define RTL8367C_DSCP45_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP44_DSCP_OFFSET 0 -#define RTL8367C_DSCP44_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL23 0x09F7 -#define RTL8367C_DSCP47_DSCP_OFFSET 8 -#define RTL8367C_DSCP47_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP46_DSCP_OFFSET 0 -#define RTL8367C_DSCP46_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL24 0x09F8 -#define RTL8367C_DSCP49_DSCP_OFFSET 8 -#define RTL8367C_DSCP49_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP48_DSCP_OFFSET 0 -#define RTL8367C_DSCP48_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL25 0x09F9 -#define RTL8367C_DSCP51_DSCP_OFFSET 8 -#define RTL8367C_DSCP51_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP50_DSCP_OFFSET 0 -#define RTL8367C_DSCP50_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL26 0x09FA -#define RTL8367C_DSCP53_DSCP_OFFSET 8 -#define RTL8367C_DSCP53_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP52_DSCP_OFFSET 0 -#define RTL8367C_DSCP52_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL27 0x09FB -#define RTL8367C_DSCP55_DSCP_OFFSET 8 -#define RTL8367C_DSCP55_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP54_DSCP_OFFSET 0 -#define RTL8367C_DSCP54_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL28 0x09FC -#define RTL8367C_DSCP57_DSCP_OFFSET 8 -#define RTL8367C_DSCP57_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP56_DSCP_OFFSET 0 -#define RTL8367C_DSCP56_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL29 0x09FD -#define RTL8367C_DSCP59_DSCP_OFFSET 8 -#define RTL8367C_DSCP59_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP58_DSCP_OFFSET 0 -#define RTL8367C_DSCP58_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL30 0x09FE -#define RTL8367C_DSCP61_DSCP_OFFSET 8 -#define RTL8367C_DSCP61_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP60_DSCP_OFFSET 0 -#define RTL8367C_DSCP60_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_DSCP_CTRL31 0x09FF -#define RTL8367C_DSCP63_DSCP_OFFSET 8 -#define RTL8367C_DSCP63_DSCP_MASK 0x3F00 -#define RTL8367C_DSCP62_DSCP_OFFSET 0 -#define RTL8367C_DSCP62_DSCP_MASK 0x3F - -/* (16'h0a00)l2_reg */ - -#define RTL8367C_REG_VLAN_MSTI0_CTRL0 0x0a00 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI0_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI0_CTRL1 0x0a01 -#define RTL8367C_VLAN_MSTI0_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI0_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI0_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI0_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI0_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI0_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI1_CTRL0 0x0a02 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI1_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI1_CTRL1 0x0a03 -#define RTL8367C_VLAN_MSTI1_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI1_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI1_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI1_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI1_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI1_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI2_CTRL0 0x0a04 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI2_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI2_CTRL1 0x0a05 -#define RTL8367C_VLAN_MSTI2_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI2_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI2_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI2_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI2_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI2_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI3_CTRL0 0x0a06 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI3_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI3_CTRL1 0x0a07 -#define RTL8367C_VLAN_MSTI3_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI3_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI3_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI3_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI3_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI3_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI4_CTRL0 0x0a08 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI4_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI4_CTRL1 0x0a09 -#define RTL8367C_VLAN_MSTI4_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI4_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI4_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI4_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI4_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI4_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI5_CTRL0 0x0a0a -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI5_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI5_CTRL1 0x0a0b -#define RTL8367C_VLAN_MSTI5_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI5_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI5_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI5_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI5_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI5_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI6_CTRL0 0x0a0c -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI6_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI6_CTRL1 0x0a0d -#define RTL8367C_VLAN_MSTI6_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI6_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI6_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI6_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI6_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI6_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI7_CTRL0 0x0a0e -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI7_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI7_CTRL1 0x0a0f -#define RTL8367C_VLAN_MSTI7_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI7_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI7_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI7_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI7_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI7_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI8_CTRL0 0x0a10 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI8_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI8_CTRL1 0x0a11 -#define RTL8367C_VLAN_MSTI8_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI8_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI8_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI8_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI8_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI8_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI9_CTRL0 0x0a12 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI9_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI9_CTRL1 0x0a13 -#define RTL8367C_VLAN_MSTI9_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI9_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI9_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI9_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI9_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI9_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI10_CTRL0 0x0a14 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI10_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI10_CTRL1 0x0a15 -#define RTL8367C_VLAN_MSTI10_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI10_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI10_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI10_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI10_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI10_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI11_CTRL0 0x0a16 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI11_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI11_CTRL1 0x0a17 -#define RTL8367C_VLAN_MSTI11_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI11_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI11_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI11_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI11_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI11_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI12_CTRL0 0x0a18 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI12_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI12_CTRL1 0x0a19 -#define RTL8367C_VLAN_MSTI12_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI12_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI12_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI12_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI12_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI12_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI13_CTRL0 0x0a1a -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI13_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI13_CTRL1 0x0a1b -#define RTL8367C_VLAN_MSTI13_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI13_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI13_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI13_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI13_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI13_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI14_CTRL0 0x0a1c -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI14_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI14_CTRL1 0x0a1d -#define RTL8367C_VLAN_MSTI14_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI14_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI14_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI14_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI14_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI14_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI15_CTRL0 0x0a1e -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT7_STATE_OFFSET 14 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT7_STATE_MASK 0xC000 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT6_STATE_OFFSET 12 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT6_STATE_MASK 0x3000 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT5_STATE_OFFSET 10 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT5_STATE_MASK 0xC00 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT4_STATE_OFFSET 8 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT4_STATE_MASK 0x300 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT3_STATE_OFFSET 6 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT3_STATE_MASK 0xC0 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT2_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT2_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT1_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT1_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT0_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI15_CTRL0_PORT0_STATE_MASK 0x3 - -#define RTL8367C_REG_VLAN_MSTI15_CTRL1 0x0a1f -#define RTL8367C_VLAN_MSTI15_CTRL1_PORT10_STATE_OFFSET 4 -#define RTL8367C_VLAN_MSTI15_CTRL1_PORT10_STATE_MASK 0x30 -#define RTL8367C_VLAN_MSTI15_CTRL1_PORT9_STATE_OFFSET 2 -#define RTL8367C_VLAN_MSTI15_CTRL1_PORT9_STATE_MASK 0xC -#define RTL8367C_VLAN_MSTI15_CTRL1_PORT8_STATE_OFFSET 0 -#define RTL8367C_VLAN_MSTI15_CTRL1_PORT8_STATE_MASK 0x3 - -#define RTL8367C_REG_LUT_PORT0_LEARN_LIMITNO 0x0a20 -#define RTL8367C_LUT_PORT0_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT0_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT1_LEARN_LIMITNO 0x0a21 -#define RTL8367C_LUT_PORT1_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT1_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT2_LEARN_LIMITNO 0x0a22 -#define RTL8367C_LUT_PORT2_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT2_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT3_LEARN_LIMITNO 0x0a23 -#define RTL8367C_LUT_PORT3_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT3_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT4_LEARN_LIMITNO 0x0a24 -#define RTL8367C_LUT_PORT4_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT4_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT5_LEARN_LIMITNO 0x0a25 -#define RTL8367C_LUT_PORT5_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT5_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT6_LEARN_LIMITNO 0x0a26 -#define RTL8367C_LUT_PORT6_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT6_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT7_LEARN_LIMITNO 0x0a27 -#define RTL8367C_LUT_PORT7_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT7_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_SYS_LEARN_LIMITNO 0x0a28 -#define RTL8367C_LUT_SYS_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_SYS_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL 0x0a29 -#define RTL8367C_LUT_SYSTEM_LEARN_PMASK1_OFFSET 12 -#define RTL8367C_LUT_SYSTEM_LEARN_PMASK1_MASK 0x7000 -#define RTL8367C_LUT_SYSTEM_LEARN_OVER_ACT_OFFSET 10 -#define RTL8367C_LUT_SYSTEM_LEARN_OVER_ACT_MASK 0xC00 -#define RTL8367C_LUT_SYSTEM_LEARN_PMASK_OFFSET 0 -#define RTL8367C_LUT_SYSTEM_LEARN_PMASK_MASK 0xFF - -#define RTL8367C_REG_LUT_PORT8_LEARN_LIMITNO 0x0a2a -#define RTL8367C_LUT_PORT8_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT8_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT9_LEARN_LIMITNO 0x0a2b -#define RTL8367C_LUT_PORT9_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT9_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_PORT10_LEARN_LIMITNO 0x0a2c -#define RTL8367C_LUT_PORT10_LEARN_LIMITNO_OFFSET 0 -#define RTL8367C_LUT_PORT10_LEARN_LIMITNO_MASK 0x1FFF - -#define RTL8367C_REG_LUT_CFG 0x0a30 -#define RTL8367C_AGE_SPEED_OFFSET 8 -#define RTL8367C_AGE_SPEED_MASK 0x300 -#define RTL8367C_BCAM_DISABLE_OFFSET 6 -#define RTL8367C_BCAM_DISABLE_MASK 0x40 -#define RTL8367C_LINKDOWN_AGEOUT_OFFSET 5 -#define RTL8367C_LINKDOWN_AGEOUT_MASK 0x20 -#define RTL8367C_LUT_IPMC_HASH_OFFSET 4 -#define RTL8367C_LUT_IPMC_HASH_MASK 0x10 -#define RTL8367C_LUT_IPMC_LOOKUP_OP_OFFSET 3 -#define RTL8367C_LUT_IPMC_LOOKUP_OP_MASK 0x8 -#define RTL8367C_AGE_TIMER_OFFSET 0 -#define RTL8367C_AGE_TIMER_MASK 0x7 - -#define RTL8367C_REG_LUT_AGEOUT_CTRL 0x0a31 -#define RTL8367C_LUT_AGEOUT_CTRL_OFFSET 0 -#define RTL8367C_LUT_AGEOUT_CTRL_MASK 0x7FF - -#define RTL8367C_REG_PORT_EFID_CTRL0 0x0a32 -#define RTL8367C_PORT3_EFID_OFFSET 12 -#define RTL8367C_PORT3_EFID_MASK 0x7000 -#define RTL8367C_PORT2_EFID_OFFSET 8 -#define RTL8367C_PORT2_EFID_MASK 0x700 -#define RTL8367C_PORT1_EFID_OFFSET 4 -#define RTL8367C_PORT1_EFID_MASK 0x70 -#define RTL8367C_PORT0_EFID_OFFSET 0 -#define RTL8367C_PORT0_EFID_MASK 0x7 - -#define RTL8367C_REG_PORT_EFID_CTRL1 0x0a33 -#define RTL8367C_PORT7_EFID_OFFSET 12 -#define RTL8367C_PORT7_EFID_MASK 0x7000 -#define RTL8367C_PORT6_EFID_OFFSET 8 -#define RTL8367C_PORT6_EFID_MASK 0x700 -#define RTL8367C_PORT5_EFID_OFFSET 4 -#define RTL8367C_PORT5_EFID_MASK 0x70 -#define RTL8367C_PORT4_EFID_OFFSET 0 -#define RTL8367C_PORT4_EFID_MASK 0x7 - -#define RTL8367C_REG_PORT_EFID_CTRL2 0x0a34 -#define RTL8367C_PORT10_EFID_OFFSET 8 -#define RTL8367C_PORT10_EFID_MASK 0x700 -#define RTL8367C_PORT9_EFID_OFFSET 4 -#define RTL8367C_PORT9_EFID_MASK 0x70 -#define RTL8367C_PORT8_EFID_OFFSET 0 -#define RTL8367C_PORT8_EFID_MASK 0x7 - -#define RTL8367C_REG_FORCE_FLUSH1 0x0a35 -#define RTL8367C_BUSY_STATUS1_OFFSET 3 -#define RTL8367C_BUSY_STATUS1_MASK 0x38 -#define RTL8367C_PORTMASK1_OFFSET 0 -#define RTL8367C_PORTMASK1_MASK 0x7 - -#define RTL8367C_REG_FORCE_FLUSH 0x0a36 -#define RTL8367C_BUSY_STATUS_OFFSET 8 -#define RTL8367C_BUSY_STATUS_MASK 0xFF00 -#define RTL8367C_FORCE_FLUSH_PORTMASK_OFFSET 0 -#define RTL8367C_FORCE_FLUSH_PORTMASK_MASK 0xFF - -#define RTL8367C_REG_L2_FLUSH_CTRL1 0x0a37 -#define RTL8367C_LUT_FLUSH_FID_OFFSET 12 -#define RTL8367C_LUT_FLUSH_FID_MASK 0xF000 -#define RTL8367C_LUT_FLUSH_VID_OFFSET 0 -#define RTL8367C_LUT_FLUSH_VID_MASK 0xFFF - -#define RTL8367C_REG_L2_FLUSH_CTRL2 0x0a38 -#define RTL8367C_LUT_FLUSH_TYPE_OFFSET 2 -#define RTL8367C_LUT_FLUSH_TYPE_MASK 0x4 -#define RTL8367C_LUT_FLUSH_MODE_OFFSET 0 -#define RTL8367C_LUT_FLUSH_MODE_MASK 0x3 - -#define RTL8367C_REG_L2_FLUSH_CTRL3 0x0a39 -#define RTL8367C_L2_FLUSH_CTRL3_OFFSET 0 -#define RTL8367C_L2_FLUSH_CTRL3_MASK 0x1 - -#define RTL8367C_REG_LUT_CFG2 0x0a3a -#define RTL8367C_LUT_IPMC_FWD_RPORT_OFFSET 1 -#define RTL8367C_LUT_IPMC_FWD_RPORT_MASK 0x2 -#define RTL8367C_LUT_IPMC_VID_HASH_OFFSET 0 -#define RTL8367C_LUT_IPMC_VID_HASH_MASK 0x1 - -#define RTL8367C_REG_FLUSH_STATUS 0x0a3f -#define RTL8367C_FLUSH_STATUS_OFFSET 0 -#define RTL8367C_FLUSH_STATUS_MASK 0x1 - -#define RTL8367C_REG_STORM_BCAST 0x0a40 -#define RTL8367C_STORM_BCAST_OFFSET 0 -#define RTL8367C_STORM_BCAST_MASK 0x7FF - -#define RTL8367C_REG_STORM_MCAST 0x0a41 -#define RTL8367C_STORM_MCAST_OFFSET 0 -#define RTL8367C_STORM_MCAST_MASK 0x7FF - -#define RTL8367C_REG_STORM_UNKOWN_UCAST 0x0a42 -#define RTL8367C_STORM_UNKOWN_UCAST_OFFSET 0 -#define RTL8367C_STORM_UNKOWN_UCAST_MASK 0x7FF - -#define RTL8367C_REG_STORM_UNKOWN_MCAST 0x0a43 -#define RTL8367C_STORM_UNKOWN_MCAST_OFFSET 0 -#define RTL8367C_STORM_UNKOWN_MCAST_MASK 0x7FF - -#define RTL8367C_REG_STORM_BCAST_METER_CTRL0 0x0a44 -#define RTL8367C_STORM_BCAST_METER_CTRL0_PORT1_METERIDX_OFFSET 8 -#define RTL8367C_STORM_BCAST_METER_CTRL0_PORT1_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_BCAST_METER_CTRL0_PORT0_METERIDX_OFFSET 0 -#define RTL8367C_STORM_BCAST_METER_CTRL0_PORT0_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_BCAST_METER_CTRL1 0x0a45 -#define RTL8367C_STORM_BCAST_METER_CTRL1_PORT3_METERIDX_OFFSET 8 -#define RTL8367C_STORM_BCAST_METER_CTRL1_PORT3_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_BCAST_METER_CTRL1_PORT2_METERIDX_OFFSET 0 -#define RTL8367C_STORM_BCAST_METER_CTRL1_PORT2_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_BCAST_METER_CTRL2 0x0a46 -#define RTL8367C_STORM_BCAST_METER_CTRL2_PORT5_METERIDX_OFFSET 8 -#define RTL8367C_STORM_BCAST_METER_CTRL2_PORT5_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_BCAST_METER_CTRL2_PORT4_METERIDX_OFFSET 0 -#define RTL8367C_STORM_BCAST_METER_CTRL2_PORT4_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_BCAST_METER_CTRL3 0x0a47 -#define RTL8367C_STORM_BCAST_METER_CTRL3_PORT7_METERIDX_OFFSET 8 -#define RTL8367C_STORM_BCAST_METER_CTRL3_PORT7_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_BCAST_METER_CTRL3_PORT6_METERIDX_OFFSET 0 -#define RTL8367C_STORM_BCAST_METER_CTRL3_PORT6_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_BCAST_METER_CTRL4 0x0a48 -#define RTL8367C_STORM_BCAST_METER_CTRL4_PORT9_METERIDX_OFFSET 8 -#define RTL8367C_STORM_BCAST_METER_CTRL4_PORT9_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_BCAST_METER_CTRL4_PORT8_METERIDX_OFFSET 0 -#define RTL8367C_STORM_BCAST_METER_CTRL4_PORT8_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_BCAST_METER_CTRL5 0x0a49 -#define RTL8367C_STORM_BCAST_METER_CTRL5_OFFSET 0 -#define RTL8367C_STORM_BCAST_METER_CTRL5_MASK 0x3F - -#define RTL8367C_REG_STORM_MCAST_METER_CTRL0 0x0a4c -#define RTL8367C_STORM_MCAST_METER_CTRL0_PORT1_METERIDX_OFFSET 8 -#define RTL8367C_STORM_MCAST_METER_CTRL0_PORT1_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_MCAST_METER_CTRL0_PORT0_METERIDX_OFFSET 0 -#define RTL8367C_STORM_MCAST_METER_CTRL0_PORT0_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_MCAST_METER_CTRL1 0x0a4d -#define RTL8367C_STORM_MCAST_METER_CTRL1_PORT3_METERIDX_OFFSET 8 -#define RTL8367C_STORM_MCAST_METER_CTRL1_PORT3_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_MCAST_METER_CTRL1_PORT2_METERIDX_OFFSET 0 -#define RTL8367C_STORM_MCAST_METER_CTRL1_PORT2_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_MCAST_METER_CTRL2 0x0a4e -#define RTL8367C_STORM_MCAST_METER_CTRL2_PORT5_METERIDX_OFFSET 8 -#define RTL8367C_STORM_MCAST_METER_CTRL2_PORT5_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_MCAST_METER_CTRL2_PORT4_METERIDX_OFFSET 0 -#define RTL8367C_STORM_MCAST_METER_CTRL2_PORT4_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_MCAST_METER_CTRL3 0x0a4f -#define RTL8367C_STORM_MCAST_METER_CTRL3_PORT7_METERIDX_OFFSET 8 -#define RTL8367C_STORM_MCAST_METER_CTRL3_PORT7_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_MCAST_METER_CTRL3_PORT6_METERIDX_OFFSET 0 -#define RTL8367C_STORM_MCAST_METER_CTRL3_PORT6_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_MCAST_METER_CTRL4 0x0a50 -#define RTL8367C_STORM_MCAST_METER_CTRL4_PORT9_METERIDX_OFFSET 8 -#define RTL8367C_STORM_MCAST_METER_CTRL4_PORT9_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_MCAST_METER_CTRL4_PORT8_METERIDX_OFFSET 0 -#define RTL8367C_STORM_MCAST_METER_CTRL4_PORT8_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_MCAST_METER_CTRL5 0x0a51 -#define RTL8367C_STORM_MCAST_METER_CTRL5_OFFSET 0 -#define RTL8367C_STORM_MCAST_METER_CTRL5_MASK 0x3F - -#define RTL8367C_REG_STORM_UNDA_METER_CTRL0 0x0a54 -#define RTL8367C_STORM_UNDA_METER_CTRL0_PORT1_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNDA_METER_CTRL0_PORT1_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNDA_METER_CTRL0_PORT0_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNDA_METER_CTRL0_PORT0_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNDA_METER_CTRL1 0x0a55 -#define RTL8367C_STORM_UNDA_METER_CTRL1_PORT3_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNDA_METER_CTRL1_PORT3_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNDA_METER_CTRL1_PORT2_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNDA_METER_CTRL1_PORT2_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNDA_METER_CTRL2 0x0a56 -#define RTL8367C_STORM_UNDA_METER_CTRL2_PORT5_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNDA_METER_CTRL2_PORT5_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNDA_METER_CTRL2_PORT4_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNDA_METER_CTRL2_PORT4_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNDA_METER_CTRL3 0x0a57 -#define RTL8367C_STORM_UNDA_METER_CTRL3_PORT7_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNDA_METER_CTRL3_PORT7_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNDA_METER_CTRL3_PORT6_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNDA_METER_CTRL3_PORT6_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNDA_METER_CTRL4 0x0a58 -#define RTL8367C_STORM_UNDA_METER_CTRL4_PORT9_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNDA_METER_CTRL4_PORT9_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNDA_METER_CTRL4_PORT8_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNDA_METER_CTRL4_PORT8_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNDA_METER_CTRL5 0x0a59 -#define RTL8367C_STORM_UNDA_METER_CTRL5_OFFSET 0 -#define RTL8367C_STORM_UNDA_METER_CTRL5_MASK 0x3F - -#define RTL8367C_REG_STORM_UNMC_METER_CTRL0 0x0a5c -#define RTL8367C_STORM_UNMC_METER_CTRL0_PORT1_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNMC_METER_CTRL0_PORT1_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNMC_METER_CTRL0_PORT0_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNMC_METER_CTRL0_PORT0_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNMC_METER_CTRL1 0x0a5d -#define RTL8367C_STORM_UNMC_METER_CTRL1_PORT3_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNMC_METER_CTRL1_PORT3_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNMC_METER_CTRL1_PORT2_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNMC_METER_CTRL1_PORT2_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNMC_METER_CTRL2 0x0a5e -#define RTL8367C_STORM_UNMC_METER_CTRL2_PORT5_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNMC_METER_CTRL2_PORT5_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNMC_METER_CTRL2_PORT4_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNMC_METER_CTRL2_PORT4_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNMC_METER_CTRL3 0x0a5f -#define RTL8367C_STORM_UNMC_METER_CTRL3_PORT7_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNMC_METER_CTRL3_PORT7_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNMC_METER_CTRL3_PORT6_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNMC_METER_CTRL3_PORT6_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_EXT_CFG 0x0a60 -#define RTL8367C_STORM_EXT_EN_PORTMASK_EXT_OFFSET 14 -#define RTL8367C_STORM_EXT_EN_PORTMASK_EXT_MASK 0x4000 -#define RTL8367C_STORM_UNKNOWN_MCAST_EXT_EN_OFFSET 13 -#define RTL8367C_STORM_UNKNOWN_MCAST_EXT_EN_MASK 0x2000 -#define RTL8367C_STORM_UNKNOWN_UCAST_EXT_EN_OFFSET 12 -#define RTL8367C_STORM_UNKNOWN_UCAST_EXT_EN_MASK 0x1000 -#define RTL8367C_STORM_MCAST_EXT_EN_OFFSET 11 -#define RTL8367C_STORM_MCAST_EXT_EN_MASK 0x800 -#define RTL8367C_STORM_BCAST_EXT_EN_OFFSET 10 -#define RTL8367C_STORM_BCAST_EXT_EN_MASK 0x400 -#define RTL8367C_STORM_EXT_EN_PORTMASK_OFFSET 0 -#define RTL8367C_STORM_EXT_EN_PORTMASK_MASK 0x3FF - -#define RTL8367C_REG_STORM_EXT_MTRIDX_CFG0 0x0a61 -#define RTL8367C_MC_STORM_EXT_METERIDX_OFFSET 8 -#define RTL8367C_MC_STORM_EXT_METERIDX_MASK 0x3F00 -#define RTL8367C_BC_STORM_EXT_METERIDX_OFFSET 0 -#define RTL8367C_BC_STORM_EXT_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_EXT_MTRIDX_CFG1 0x0a62 -#define RTL8367C_UNMC_STORM_EXT_METERIDX_OFFSET 8 -#define RTL8367C_UNMC_STORM_EXT_METERIDX_MASK 0x3F00 -#define RTL8367C_UNUC_STORM_EXT_METERIDX_OFFSET 0 -#define RTL8367C_UNUC_STORM_EXT_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNMC_METER_CTRL4 0x0a63 -#define RTL8367C_STORM_UNMC_METER_CTRL4_PORT9_METERIDX_OFFSET 8 -#define RTL8367C_STORM_UNMC_METER_CTRL4_PORT9_METERIDX_MASK 0x3F00 -#define RTL8367C_STORM_UNMC_METER_CTRL4_PORT8_METERIDX_OFFSET 0 -#define RTL8367C_STORM_UNMC_METER_CTRL4_PORT8_METERIDX_MASK 0x3F - -#define RTL8367C_REG_STORM_UNMC_METER_CTRL5 0x0a64 -#define RTL8367C_STORM_UNMC_METER_CTRL5_OFFSET 0 -#define RTL8367C_STORM_UNMC_METER_CTRL5_MASK 0x3F - -#define RTL8367C_REG_OAM_PARSER_CTRL0 0x0a70 -#define RTL8367C_PORT7_PARACT_OFFSET 14 -#define RTL8367C_PORT7_PARACT_MASK 0xC000 -#define RTL8367C_PORT6_PARACT_OFFSET 12 -#define RTL8367C_PORT6_PARACT_MASK 0x3000 -#define RTL8367C_PORT5_PARACT_OFFSET 10 -#define RTL8367C_PORT5_PARACT_MASK 0xC00 -#define RTL8367C_PORT4_PARACT_OFFSET 8 -#define RTL8367C_PORT4_PARACT_MASK 0x300 -#define RTL8367C_PORT3_PARACT_OFFSET 6 -#define RTL8367C_PORT3_PARACT_MASK 0xC0 -#define RTL8367C_PORT2_PARACT_OFFSET 4 -#define RTL8367C_PORT2_PARACT_MASK 0x30 -#define RTL8367C_PORT1_PARACT_OFFSET 2 -#define RTL8367C_PORT1_PARACT_MASK 0xC -#define RTL8367C_PORT0_PARACT_OFFSET 0 -#define RTL8367C_PORT0_PARACT_MASK 0x3 - -#define RTL8367C_REG_OAM_PARSER_CTRL1 0x0a71 -#define RTL8367C_PORT10_PARACT_OFFSET 4 -#define RTL8367C_PORT10_PARACT_MASK 0x30 -#define RTL8367C_PORT9_PARACT_OFFSET 2 -#define RTL8367C_PORT9_PARACT_MASK 0xC -#define RTL8367C_PORT8_PARACT_OFFSET 0 -#define RTL8367C_PORT8_PARACT_MASK 0x3 - -#define RTL8367C_REG_OAM_MULTIPLEXER_CTRL0 0x0a72 -#define RTL8367C_PORT7_MULACT_OFFSET 14 -#define RTL8367C_PORT7_MULACT_MASK 0xC000 -#define RTL8367C_PORT6_MULACT_OFFSET 12 -#define RTL8367C_PORT6_MULACT_MASK 0x3000 -#define RTL8367C_PORT5_MULACT_OFFSET 10 -#define RTL8367C_PORT5_MULACT_MASK 0xC00 -#define RTL8367C_PORT4_MULACT_OFFSET 8 -#define RTL8367C_PORT4_MULACT_MASK 0x300 -#define RTL8367C_PORT3_MULACT_OFFSET 6 -#define RTL8367C_PORT3_MULACT_MASK 0xC0 -#define RTL8367C_PORT2_MULACT_OFFSET 4 -#define RTL8367C_PORT2_MULACT_MASK 0x30 -#define RTL8367C_PORT1_MULACT_OFFSET 2 -#define RTL8367C_PORT1_MULACT_MASK 0xC -#define RTL8367C_PORT0_MULACT_OFFSET 0 -#define RTL8367C_PORT0_MULACT_MASK 0x3 - -#define RTL8367C_REG_OAM_MULTIPLEXER_CTRL1 0x0a73 -#define RTL8367C_PORT10_MULACT_OFFSET 4 -#define RTL8367C_PORT10_MULACT_MASK 0x30 -#define RTL8367C_PORT9_MULACT_OFFSET 2 -#define RTL8367C_PORT9_MULACT_MASK 0xC -#define RTL8367C_PORT8_MULACT_OFFSET 0 -#define RTL8367C_PORT8_MULACT_MASK 0x3 - -#define RTL8367C_REG_OAM_CTRL 0x0a74 -#define RTL8367C_OAM_CTRL_OFFSET 0 -#define RTL8367C_OAM_CTRL_MASK 0x1 - -#define RTL8367C_REG_DOT1X_PORT_ENABLE 0x0a80 -#define RTL8367C_DOT1X_PORT_ENABLE_OFFSET 0 -#define RTL8367C_DOT1X_PORT_ENABLE_MASK 0x7FF - -#define RTL8367C_REG_DOT1X_MAC_ENABLE 0x0a81 -#define RTL8367C_DOT1X_MAC_ENABLE_OFFSET 0 -#define RTL8367C_DOT1X_MAC_ENABLE_MASK 0x7FF - -#define RTL8367C_REG_DOT1X_PORT_AUTH 0x0a82 -#define RTL8367C_DOT1X_PORT_AUTH_OFFSET 0 -#define RTL8367C_DOT1X_PORT_AUTH_MASK 0x7FF - -#define RTL8367C_REG_DOT1X_PORT_OPDIR 0x0a83 -#define RTL8367C_DOT1X_PORT_OPDIR_OFFSET 0 -#define RTL8367C_DOT1X_PORT_OPDIR_MASK 0x7FF - -#define RTL8367C_REG_DOT1X_UNAUTH_ACT_W0 0x0a84 -#define RTL8367C_DOT1X_PORT7_UNAUTHBH_OFFSET 14 -#define RTL8367C_DOT1X_PORT7_UNAUTHBH_MASK 0xC000 -#define RTL8367C_DOT1X_PORT6_UNAUTHBH_OFFSET 12 -#define RTL8367C_DOT1X_PORT6_UNAUTHBH_MASK 0x3000 -#define RTL8367C_DOT1X_PORT5_UNAUTHBH_OFFSET 10 -#define RTL8367C_DOT1X_PORT5_UNAUTHBH_MASK 0xC00 -#define RTL8367C_DOT1X_PORT4_UNAUTHBH_OFFSET 8 -#define RTL8367C_DOT1X_PORT4_UNAUTHBH_MASK 0x300 -#define RTL8367C_DOT1X_PORT3_UNAUTHBH_OFFSET 6 -#define RTL8367C_DOT1X_PORT3_UNAUTHBH_MASK 0xC0 -#define RTL8367C_DOT1X_PORT2_UNAUTHBH_OFFSET 4 -#define RTL8367C_DOT1X_PORT2_UNAUTHBH_MASK 0x30 -#define RTL8367C_DOT1X_PORT1_UNAUTHBH_OFFSET 2 -#define RTL8367C_DOT1X_PORT1_UNAUTHBH_MASK 0xC -#define RTL8367C_DOT1X_PORT0_UNAUTHBH_OFFSET 0 -#define RTL8367C_DOT1X_PORT0_UNAUTHBH_MASK 0x3 - -#define RTL8367C_REG_DOT1X_UNAUTH_ACT_W1 0x0a85 -#define RTL8367C_DOT1X_PORT10_UNAUTHBH_OFFSET 4 -#define RTL8367C_DOT1X_PORT10_UNAUTHBH_MASK 0x30 -#define RTL8367C_DOT1X_PORT9_UNAUTHBH_OFFSET 2 -#define RTL8367C_DOT1X_PORT9_UNAUTHBH_MASK 0xC -#define RTL8367C_DOT1X_PORT8_UNAUTHBH_OFFSET 0 -#define RTL8367C_DOT1X_PORT8_UNAUTHBH_MASK 0x3 - -#define RTL8367C_REG_DOT1X_CFG 0x0a86 -#define RTL8367C_DOT1X_GVOPDIR_OFFSET 6 -#define RTL8367C_DOT1X_GVOPDIR_MASK 0x40 -#define RTL8367C_DOT1X_MAC_OPDIR_OFFSET 5 -#define RTL8367C_DOT1X_MAC_OPDIR_MASK 0x20 -#define RTL8367C_DOT1X_GVIDX_OFFSET 0 -#define RTL8367C_DOT1X_GVIDX_MASK 0x1F - -#define RTL8367C_REG_L2_LRN_CNT_CTRL0 0x0a87 -#define RTL8367C_L2_LRN_CNT_CTRL0_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL0_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL1 0x0a88 -#define RTL8367C_L2_LRN_CNT_CTRL1_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL1_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL2 0x0a89 -#define RTL8367C_L2_LRN_CNT_CTRL2_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL3 0x0a8a -#define RTL8367C_L2_LRN_CNT_CTRL3_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL3_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL4 0x0a8b -#define RTL8367C_L2_LRN_CNT_CTRL4_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL4_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL5 0x0a8c -#define RTL8367C_L2_LRN_CNT_CTRL5_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL5_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL6 0x0a8d -#define RTL8367C_L2_LRN_CNT_CTRL6_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL6_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL7 0x0a8e -#define RTL8367C_L2_LRN_CNT_CTRL7_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL7_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL8 0x0a8f -#define RTL8367C_L2_LRN_CNT_CTRL8_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL8_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL9 0x0a90 -#define RTL8367C_L2_LRN_CNT_CTRL9_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL9_MASK 0x1FFF - -#define RTL8367C_REG_L2_LRN_CNT_CTRL10 0x0a92 -#define RTL8367C_L2_LRN_CNT_CTRL10_OFFSET 0 -#define RTL8367C_L2_LRN_CNT_CTRL10_MASK 0x1FFF - -#define RTL8367C_REG_LUT_LRN_UNDER_STATUS 0x0a91 -#define RTL8367C_LUT_LRN_UNDER_STATUS_OFFSET 0 -#define RTL8367C_LUT_LRN_UNDER_STATUS_MASK 0x7FF - -#define RTL8367C_REG_L2_SA_MOVING_FORBID 0x0aa0 -#define RTL8367C_L2_SA_MOVING_FORBID_OFFSET 0 -#define RTL8367C_L2_SA_MOVING_FORBID_MASK 0x7FF - -#define RTL8367C_REG_DRPORT_LEARN_CTRL 0x0aa1 -#define RTL8367C_FORBID1_OFFSET 1 -#define RTL8367C_FORBID1_MASK 0x2 -#define RTL8367C_FORBID0_OFFSET 0 -#define RTL8367C_FORBID0_MASK 0x1 - -#define RTL8367C_REG_L2_DUMMY02 0x0aa2 - -#define RTL8367C_REG_L2_DUMMY03 0x0aa3 - -#define RTL8367C_REG_L2_DUMMY04 0x0aa4 - -#define RTL8367C_REG_L2_DUMMY05 0x0aa5 - -#define RTL8367C_REG_L2_DUMMY06 0x0aa6 - -#define RTL8367C_REG_L2_DUMMY07 0x0aa7 - -#define RTL8367C_REG_IPMC_GROUP_PMSK_00 0x0AC0 -#define RTL8367C_IPMC_GROUP_PMSK_00_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_00_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_01 0x0AC1 -#define RTL8367C_IPMC_GROUP_PMSK_01_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_01_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_02 0x0AC2 -#define RTL8367C_IPMC_GROUP_PMSK_02_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_02_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_03 0x0AC3 -#define RTL8367C_IPMC_GROUP_PMSK_03_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_03_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_04 0x0AC4 -#define RTL8367C_IPMC_GROUP_PMSK_04_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_04_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_05 0x0AC5 -#define RTL8367C_IPMC_GROUP_PMSK_05_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_05_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_06 0x0AC6 -#define RTL8367C_IPMC_GROUP_PMSK_06_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_06_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_07 0x0AC7 -#define RTL8367C_IPMC_GROUP_PMSK_07_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_07_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_08 0x0AC8 -#define RTL8367C_IPMC_GROUP_PMSK_08_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_08_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_09 0x0AC9 -#define RTL8367C_IPMC_GROUP_PMSK_09_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_09_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_10 0x0ACA -#define RTL8367C_IPMC_GROUP_PMSK_10_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_10_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_11 0x0ACB -#define RTL8367C_IPMC_GROUP_PMSK_11_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_11_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_12 0x0ACC -#define RTL8367C_IPMC_GROUP_PMSK_12_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_12_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_13 0x0ACD -#define RTL8367C_IPMC_GROUP_PMSK_13_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_13_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_14 0x0ACE -#define RTL8367C_IPMC_GROUP_PMSK_14_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_14_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_15 0x0ACF -#define RTL8367C_IPMC_GROUP_PMSK_15_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_15_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_16 0x0AD0 -#define RTL8367C_IPMC_GROUP_PMSK_16_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_16_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_17 0x0AD1 -#define RTL8367C_IPMC_GROUP_PMSK_17_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_17_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_18 0x0AD2 -#define RTL8367C_IPMC_GROUP_PMSK_18_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_18_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_19 0x0AD3 -#define RTL8367C_IPMC_GROUP_PMSK_19_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_19_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_20 0x0AD4 -#define RTL8367C_IPMC_GROUP_PMSK_20_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_20_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_21 0x0AD5 -#define RTL8367C_IPMC_GROUP_PMSK_21_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_21_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_22 0x0AD6 -#define RTL8367C_IPMC_GROUP_PMSK_22_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_22_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_23 0x0AD7 -#define RTL8367C_IPMC_GROUP_PMSK_23_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_23_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_24 0x0AD8 -#define RTL8367C_IPMC_GROUP_PMSK_24_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_24_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_25 0x0AD9 -#define RTL8367C_IPMC_GROUP_PMSK_25_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_25_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_26 0x0ADA -#define RTL8367C_IPMC_GROUP_PMSK_26_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_26_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_27 0x0ADB -#define RTL8367C_IPMC_GROUP_PMSK_27_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_27_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_28 0x0ADC -#define RTL8367C_IPMC_GROUP_PMSK_28_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_28_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_29 0x0ADD -#define RTL8367C_IPMC_GROUP_PMSK_29_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_29_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_30 0x0ADE -#define RTL8367C_IPMC_GROUP_PMSK_30_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_30_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_31 0x0ADF -#define RTL8367C_IPMC_GROUP_PMSK_31_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_31_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_32 0x0AE0 -#define RTL8367C_IPMC_GROUP_PMSK_32_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_32_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_33 0x0AE1 -#define RTL8367C_IPMC_GROUP_PMSK_33_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_33_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_34 0x0AE2 -#define RTL8367C_IPMC_GROUP_PMSK_34_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_34_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_35 0x0AE3 -#define RTL8367C_IPMC_GROUP_PMSK_35_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_35_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_36 0x0AE4 -#define RTL8367C_IPMC_GROUP_PMSK_36_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_36_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_37 0x0AE5 -#define RTL8367C_IPMC_GROUP_PMSK_37_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_37_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_38 0x0AE6 -#define RTL8367C_IPMC_GROUP_PMSK_38_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_38_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_39 0x0AE7 -#define RTL8367C_IPMC_GROUP_PMSK_39_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_39_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_40 0x0AE8 -#define RTL8367C_IPMC_GROUP_PMSK_40_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_40_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_41 0x0AE9 -#define RTL8367C_IPMC_GROUP_PMSK_41_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_41_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_42 0x0AEA -#define RTL8367C_IPMC_GROUP_PMSK_42_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_42_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_43 0x0AEB -#define RTL8367C_IPMC_GROUP_PMSK_43_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_43_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_44 0x0AEC -#define RTL8367C_IPMC_GROUP_PMSK_44_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_44_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_45 0x0AED -#define RTL8367C_IPMC_GROUP_PMSK_45_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_45_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_46 0x0AEE -#define RTL8367C_IPMC_GROUP_PMSK_46_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_46_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_47 0x0AEF -#define RTL8367C_IPMC_GROUP_PMSK_47_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_47_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_48 0x0AF0 -#define RTL8367C_IPMC_GROUP_PMSK_48_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_48_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_49 0x0AF1 -#define RTL8367C_IPMC_GROUP_PMSK_49_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_49_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_50 0x0AF2 -#define RTL8367C_IPMC_GROUP_PMSK_50_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_50_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_51 0x0AF3 -#define RTL8367C_IPMC_GROUP_PMSK_51_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_51_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_52 0x0AF4 -#define RTL8367C_IPMC_GROUP_PMSK_52_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_52_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_53 0x0AF5 -#define RTL8367C_IPMC_GROUP_PMSK_53_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_53_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_54 0x0AF6 -#define RTL8367C_IPMC_GROUP_PMSK_54_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_54_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_55 0x0AF7 -#define RTL8367C_IPMC_GROUP_PMSK_55_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_55_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_56 0x0AF8 -#define RTL8367C_IPMC_GROUP_PMSK_56_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_56_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_57 0x0AF9 -#define RTL8367C_IPMC_GROUP_PMSK_57_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_57_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_58 0x0AFA -#define RTL8367C_IPMC_GROUP_PMSK_58_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_58_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_59 0x0AFB -#define RTL8367C_IPMC_GROUP_PMSK_59_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_59_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_60 0x0AFC -#define RTL8367C_IPMC_GROUP_PMSK_60_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_60_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_61 0x0AFD -#define RTL8367C_IPMC_GROUP_PMSK_61_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_61_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_62 0x0AFE -#define RTL8367C_IPMC_GROUP_PMSK_62_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_62_MASK 0x7FF - -#define RTL8367C_REG_IPMC_GROUP_PMSK_63 0x0AFF -#define RTL8367C_IPMC_GROUP_PMSK_63_OFFSET 0 -#define RTL8367C_IPMC_GROUP_PMSK_63_MASK 0x7FF - -/* (16'h0b00)mltvlan_reg */ - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY0_CTRL0 0x0b00 -#define RTL8367C_SVLAN_MCAST2S_ENTRY0_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY0_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY0_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY0_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY0_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY0_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY0_CTRL1 0x0b01 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY0_CTRL2 0x0b02 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY0_CTRL3 0x0b03 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY0_CTRL4 0x0b04 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY1_CTRL0 0x0b05 -#define RTL8367C_SVLAN_MCAST2S_ENTRY1_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY1_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY1_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY1_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY1_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY1_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY1_CTRL1 0x0b06 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY1_CTRL2 0x0b07 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY1_CTRL3 0x0b08 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY1_CTRL4 0x0b09 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY2_CTRL0 0x0b0a -#define RTL8367C_SVLAN_MCAST2S_ENTRY2_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY2_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY2_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY2_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY2_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY2_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY2_CTRL1 0x0b0b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY2_CTRL2 0x0b0c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY2_CTRL3 0x0b0d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY2_CTRL4 0x0b0e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY3_CTRL0 0x0b0f -#define RTL8367C_SVLAN_MCAST2S_ENTRY3_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY3_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY3_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY3_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY3_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY3_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY3_CTRL1 0x0b10 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY3_CTRL2 0x0b11 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY3_CTRL3 0x0b12 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY3_CTRL4 0x0b13 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY4_CTRL0 0x0b14 -#define RTL8367C_SVLAN_MCAST2S_ENTRY4_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY4_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY4_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY4_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY4_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY4_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY4_CTRL1 0x0b15 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY4_CTRL2 0x0b16 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY4_CTRL3 0x0b17 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY4_CTRL4 0x0b18 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY5_CTRL0 0x0b19 -#define RTL8367C_SVLAN_MCAST2S_ENTRY5_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY5_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY5_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY5_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY5_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY5_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY5_CTRL1 0x0b1a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY5_CTRL2 0x0b1b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY5_CTRL3 0x0b1c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY5_CTRL4 0x0b1d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY6_CTRL0 0x0b1e -#define RTL8367C_SVLAN_MCAST2S_ENTRY6_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY6_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY6_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY6_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY6_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY6_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY6_CTRL1 0x0b1f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY6_CTRL2 0x0b20 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY6_CTRL3 0x0b21 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY6_CTRL4 0x0b22 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY7_CTRL0 0x0b23 -#define RTL8367C_SVLAN_MCAST2S_ENTRY7_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY7_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY7_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY7_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY7_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY7_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY7_CTRL1 0x0b24 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY7_CTRL2 0x0b25 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY7_CTRL3 0x0b26 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY7_CTRL4 0x0b27 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY8_CTRL0 0x0b28 -#define RTL8367C_SVLAN_MCAST2S_ENTRY8_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY8_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY8_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY8_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY8_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY8_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY8_CTRL1 0x0b29 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY8_CTRL2 0x0b2a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY8_CTRL3 0x0b2b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY8_CTRL4 0x0b2c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY9_CTRL0 0x0b2d -#define RTL8367C_SVLAN_MCAST2S_ENTRY9_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY9_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY9_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY9_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY9_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY9_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY9_CTRL1 0x0b2e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY9_CTRL2 0x0b2f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY9_CTRL3 0x0b30 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY9_CTRL4 0x0b31 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY10_CTRL0 0x0b32 -#define RTL8367C_SVLAN_MCAST2S_ENTRY10_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY10_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY10_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY10_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY10_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY10_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY10_CTRL1 0x0b33 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY10_CTRL2 0x0b34 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY10_CTRL3 0x0b35 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY10_CTRL4 0x0b36 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY11_CTRL0 0x0b37 -#define RTL8367C_SVLAN_MCAST2S_ENTRY11_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY11_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY11_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY11_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY11_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY11_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY11_CTRL1 0x0b38 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY11_CTRL2 0x0b39 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY11_CTRL3 0x0b3a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY11_CTRL4 0x0b3b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY12_CTRL0 0x0b3c -#define RTL8367C_SVLAN_MCAST2S_ENTRY12_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY12_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY12_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY12_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY12_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY12_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY12_CTRL1 0x0b3d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY12_CTRL2 0x0b3e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY12_CTRL3 0x0b3f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY12_CTRL4 0x0b40 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY13_CTRL0 0x0b41 -#define RTL8367C_SVLAN_MCAST2S_ENTRY13_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY13_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY13_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY13_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY13_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY13_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY13_CTRL1 0x0b42 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY13_CTRL2 0x0b43 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY13_CTRL3 0x0b44 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY13_CTRL4 0x0b45 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY14_CTRL0 0x0b46 -#define RTL8367C_SVLAN_MCAST2S_ENTRY14_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY14_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY14_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY14_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY14_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY14_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY14_CTRL1 0x0b47 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY14_CTRL2 0x0b48 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY14_CTRL3 0x0b49 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY14_CTRL4 0x0b4a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY15_CTRL0 0x0b4b -#define RTL8367C_SVLAN_MCAST2S_ENTRY15_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY15_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY15_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY15_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY15_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY15_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY15_CTRL1 0x0b4c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY15_CTRL2 0x0b4d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY15_CTRL3 0x0b4e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY15_CTRL4 0x0b4f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY16_CTRL0 0x0b50 -#define RTL8367C_SVLAN_MCAST2S_ENTRY16_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY16_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY16_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY16_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY16_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY16_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY16_CTRL1 0x0b51 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY16_CTRL2 0x0b52 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY16_CTRL3 0x0b53 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY16_CTRL4 0x0b54 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY17_CTRL0 0x0b55 -#define RTL8367C_SVLAN_MCAST2S_ENTRY17_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY17_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY17_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY17_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY17_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY17_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY17_CTRL1 0x0b56 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY17_CTRL2 0x0b57 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY17_CTRL3 0x0b58 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY17_CTRL4 0x0b59 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY18_CTRL0 0x0b5a -#define RTL8367C_SVLAN_MCAST2S_ENTRY18_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY18_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY18_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY18_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY18_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY18_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY18_CTRL1 0x0b5b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY18_CTRL2 0x0b5c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY18_CTRL3 0x0b5d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY18_CTRL4 0x0b5e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY19_CTRL0 0x0b5f -#define RTL8367C_SVLAN_MCAST2S_ENTRY19_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY19_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY19_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY19_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY19_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY19_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY19_CTRL1 0x0b60 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY19_CTRL2 0x0b61 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY19_CTRL3 0x0b62 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY19_CTRL4 0x0b63 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY20_CTRL0 0x0b64 -#define RTL8367C_SVLAN_MCAST2S_ENTRY20_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY20_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY20_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY20_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY20_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY20_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY20_CTRL1 0x0b65 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY20_CTRL2 0x0b66 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY20_CTRL3 0x0b67 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY20_CTRL4 0x0b68 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY21_CTRL0 0x0b69 -#define RTL8367C_SVLAN_MCAST2S_ENTRY21_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY21_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY21_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY21_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY21_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY21_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY21_CTRL1 0x0b6a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY21_CTRL2 0x0b6b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY21_CTRL3 0x0b6c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY21_CTRL4 0x0b6d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY22_CTRL0 0x0b6e -#define RTL8367C_SVLAN_MCAST2S_ENTRY22_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY22_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY22_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY22_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY22_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY22_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY22_CTRL1 0x0b6f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY22_CTRL2 0x0b70 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY22_CTRL3 0x0b71 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY22_CTRL4 0x0b72 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY23_CTRL0 0x0b73 -#define RTL8367C_SVLAN_MCAST2S_ENTRY23_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY23_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY23_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY23_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY23_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY23_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY23_CTRL1 0x0b74 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY23_CTRL2 0x0b75 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY23_CTRL3 0x0b76 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY23_CTRL4 0x0b77 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY24_CTRL0 0x0b78 -#define RTL8367C_SVLAN_MCAST2S_ENTRY24_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY24_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY24_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY24_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY24_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY24_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY24_CTRL1 0x0b79 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY24_CTRL2 0x0b7a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY24_CTRL3 0x0b7b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY24_CTRL4 0x0b7c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY25_CTRL0 0x0b7d -#define RTL8367C_SVLAN_MCAST2S_ENTRY25_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY25_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY25_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY25_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY25_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY25_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY25_CTRL1 0x0b7e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY25_CTRL2 0x0b7f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY25_CTRL3 0x0b80 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY25_CTRL4 0x0b81 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY26_CTRL0 0x0b82 -#define RTL8367C_SVLAN_MCAST2S_ENTRY26_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY26_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY26_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY26_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY26_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY26_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY26_CTRL1 0x0b83 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY26_CTRL2 0x0b84 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY26_CTRL3 0x0b85 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY26_CTRL4 0x0b86 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY27_CTRL0 0x0b87 -#define RTL8367C_SVLAN_MCAST2S_ENTRY27_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY27_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY27_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY27_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY27_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY27_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY27_CTRL1 0x0b88 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY27_CTRL2 0x0b89 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY27_CTRL3 0x0b8a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY27_CTRL4 0x0b8b - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY28_CTRL0 0x0b8c -#define RTL8367C_SVLAN_MCAST2S_ENTRY28_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY28_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY28_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY28_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY28_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY28_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY28_CTRL1 0x0b8d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY28_CTRL2 0x0b8e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY28_CTRL3 0x0b8f - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY28_CTRL4 0x0b90 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY29_CTRL0 0x0b91 -#define RTL8367C_SVLAN_MCAST2S_ENTRY29_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY29_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY29_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY29_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY29_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY29_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY29_CTRL1 0x0b92 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY29_CTRL2 0x0b93 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY29_CTRL3 0x0b94 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY29_CTRL4 0x0b95 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY30_CTRL0 0x0b96 -#define RTL8367C_SVLAN_MCAST2S_ENTRY30_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY30_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY30_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY30_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY30_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY30_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY30_CTRL1 0x0b97 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY30_CTRL2 0x0b98 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY30_CTRL3 0x0b99 - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY30_CTRL4 0x0b9a - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY31_CTRL0 0x0b9b -#define RTL8367C_SVLAN_MCAST2S_ENTRY31_CTRL0_VALID_OFFSET 7 -#define RTL8367C_SVLAN_MCAST2S_ENTRY31_CTRL0_VALID_MASK 0x80 -#define RTL8367C_SVLAN_MCAST2S_ENTRY31_CTRL0_FORMAT_OFFSET 6 -#define RTL8367C_SVLAN_MCAST2S_ENTRY31_CTRL0_FORMAT_MASK 0x40 -#define RTL8367C_SVLAN_MCAST2S_ENTRY31_CTRL0_SVIDX_OFFSET 0 -#define RTL8367C_SVLAN_MCAST2S_ENTRY31_CTRL0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY31_CTRL1 0x0b9c - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY31_CTRL2 0x0b9d - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY31_CTRL3 0x0b9e - -#define RTL8367C_REG_SVLAN_MCAST2S_ENTRY31_CTRL4 0x0b9f - -#define RTL8367C_REG_MLTVLAN_DUMMY_0 0x0ba0 - -#define RTL8367C_REG_MLTVLAN_DUMMY_1 0x0ba1 - -#define RTL8367C_REG_MLTVLAN_DUMMY_2 0x0ba2 - -#define RTL8367C_REG_MLTVLAN_DUMMY_3 0x0ba3 - -#define RTL8367C_REG_MLTVLAN_DUMMY_4 0x0ba4 - -#define RTL8367C_REG_MLTVLAN_DUMMY_5 0x0ba5 - -#define RTL8367C_REG_MLTVLAN_DUMMY_6 0x0ba6 - -#define RTL8367C_REG_MLTVLAN_DUMMY_7 0x0ba7 - -/* (16'h0c00)svlan_reg */ - -#define RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL1 0x0c01 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL2 0x0c02 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL3 0x0c03 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG1_CTRL1 0x0c04 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG1_CTRL2 0x0c05 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG1_CTRL3 0x0c06 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG2_CTRL1 0x0c07 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG2_CTRL2 0x0c08 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG2_CTRL3 0x0c09 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG3_CTRL1 0x0c0a -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG3_CTRL2 0x0c0b -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG3_CTRL3 0x0c0c -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG4_CTRL1 0x0c0d -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG4_CTRL2 0x0c0e -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG4_CTRL3 0x0c0f -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG5_CTRL1 0x0c10 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG5_CTRL2 0x0c11 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG5_CTRL3 0x0c12 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG6_CTRL1 0x0c13 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG6_CTRL2 0x0c14 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG6_CTRL3 0x0c15 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG7_CTRL1 0x0c16 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG7_CTRL2 0x0c17 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG7_CTRL3 0x0c18 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG8_CTRL1 0x0c19 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG8_CTRL2 0x0c1a -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG8_CTRL3 0x0c1b -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG9_CTRL1 0x0c1c -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG9_CTRL2 0x0c1d -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG9_CTRL3 0x0c1e -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG10_CTRL1 0x0c1f -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG10_CTRL2 0x0c20 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG10_CTRL3 0x0c21 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG11_CTRL1 0x0c22 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG11_CTRL2 0x0c23 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG11_CTRL3 0x0c24 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG12_CTRL1 0x0c25 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG12_CTRL2 0x0c26 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG12_CTRL3 0x0c27 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG13_CTRL1 0x0c28 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG13_CTRL2 0x0c29 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG13_CTRL3 0x0c2a -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG14_CTRL1 0x0c2b -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG14_CTRL2 0x0c2c -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG14_CTRL3 0x0c2d -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG15_CTRL1 0x0c2e -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG15_CTRL2 0x0c2f -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG15_CTRL3 0x0c30 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG16_CTRL1 0x0c31 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG16_CTRL2 0x0c32 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG16_CTRL3 0x0c33 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG17_CTRL1 0x0c34 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG17_CTRL2 0x0c35 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG17_CTRL3 0x0c36 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG18_CTRL1 0x0c37 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG18_CTRL2 0x0c38 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG18_CTRL3 0x0c39 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG19_CTRL1 0x0c3a -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG19_CTRL2 0x0c3b -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG19_CTRL3 0x0c3c -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG20_CTRL1 0x0c3d -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG20_CTRL2 0x0c3e -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG20_CTRL3 0x0c3f -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG21_CTRL1 0x0c40 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG21_CTRL2 0x0c41 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG21_CTRL3 0x0c42 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG22_CTRL1 0x0c43 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG22_CTRL2 0x0c44 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG22_CTRL3 0x0c45 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG23_CTRL1 0x0c46 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG23_CTRL2 0x0c47 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG23_CTRL3 0x0c48 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG24_CTRL1 0x0c49 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG24_CTRL2 0x0c4a -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG24_CTRL3 0x0c4b -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG25_CTRL1 0x0c4c -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG25_CTRL2 0x0c4d -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG25_CTRL3 0x0c4e -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG26_CTRL1 0x0c4f -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG26_CTRL2 0x0c50 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG26_CTRL3 0x0c51 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG27_CTRL1 0x0c52 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG27_CTRL2 0x0c53 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG27_CTRL3 0x0c54 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG28_CTRL1 0x0c55 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG28_CTRL2 0x0c56 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG28_CTRL3 0x0c57 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG29_CTRL1 0x0c58 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG29_CTRL2 0x0c59 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG29_CTRL3 0x0c5a -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG30_CTRL1 0x0c5b -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG30_CTRL2 0x0c5c -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG30_CTRL3 0x0c5d -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG31_CTRL1 0x0c5e -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG31_CTRL2 0x0c5f -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG31_CTRL3 0x0c60 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG32_CTRL1 0x0c61 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG32_CTRL2 0x0c62 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG32_CTRL3 0x0c63 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG33_CTRL1 0x0c64 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG33_CTRL2 0x0c65 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG33_CTRL3 0x0c66 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG34_CTRL1 0x0c67 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG34_CTRL2 0x0c68 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG34_CTRL3 0x0c69 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG35_CTRL1 0x0c6a -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG35_CTRL2 0x0c6b -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG35_CTRL3 0x0c6c -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG36_CTRL1 0x0c6d -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG36_CTRL2 0x0c6e -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG36_CTRL3 0x0c6f -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG37_CTRL1 0x0c70 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG37_CTRL2 0x0c71 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG37_CTRL3 0x0c72 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG38_CTRL1 0x0c73 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG38_CTRL2 0x0c74 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG38_CTRL3 0x0c75 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG39_CTRL1 0x0c76 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG39_CTRL2 0x0c77 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG39_CTRL3 0x0c78 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG40_CTRL1 0x0c79 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG40_CTRL2 0x0c7a -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG40_CTRL3 0x0c7b -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG41_CTRL1 0x0c7c -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG41_CTRL2 0x0c7d -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG41_CTRL3 0x0c7e -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG42_CTRL1 0x0c7f -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG42_CTRL2 0x0c80 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG42_CTRL3 0x0c81 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG43_CTRL1 0x0c82 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG43_CTRL2 0x0c83 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG43_CTRL3 0x0c84 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG44_CTRL1 0x0c85 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG44_CTRL2 0x0c86 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG44_CTRL3 0x0c87 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG45_CTRL1 0x0c88 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG45_CTRL2 0x0c89 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG45_CTRL3 0x0c8a -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG46_CTRL1 0x0c8b -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG46_CTRL2 0x0c8c -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG46_CTRL3 0x0c8d -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG47_CTRL1 0x0c8e -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG47_CTRL2 0x0c8f -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG47_CTRL3 0x0c90 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG48_CTRL1 0x0c91 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG48_CTRL2 0x0c92 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG48_CTRL3 0x0c93 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG49_CTRL1 0x0c94 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG49_CTRL2 0x0c95 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG49_CTRL3 0x0c96 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG50_CTRL1 0x0c97 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG50_CTRL2 0x0c98 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG50_CTRL3 0x0c99 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG51_CTRL1 0x0c9a -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG51_CTRL2 0x0c9b -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG51_CTRL3 0x0c9c -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG52_CTRL1 0x0c9d -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG52_CTRL2 0x0c9e -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG52_CTRL3 0x0c9f -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG53_CTRL1 0x0ca0 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG53_CTRL2 0x0ca1 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG53_CTRL3 0x0ca2 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG54_CTRL1 0x0ca3 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG54_CTRL2 0x0ca4 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG54_CTRL3 0x0ca5 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG55_CTRL1 0x0ca6 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG55_CTRL2 0x0ca7 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG55_CTRL3 0x0ca8 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG56_CTRL1 0x0ca9 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG56_CTRL2 0x0caa -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG56_CTRL3 0x0cab -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG57_CTRL1 0x0cac -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG57_CTRL2 0x0cad -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG57_CTRL3 0x0cae -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG58_CTRL1 0x0caf -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG58_CTRL2 0x0cb0 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG58_CTRL3 0x0cb1 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG59_CTRL1 0x0cb2 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG59_CTRL2 0x0cb3 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG59_CTRL3 0x0cb4 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG60_CTRL1 0x0cb5 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG60_CTRL2 0x0cb6 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG60_CTRL3 0x0cb7 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG61_CTRL1 0x0cb8 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG61_CTRL2 0x0cb9 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG61_CTRL3 0x0cba -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG62_CTRL1 0x0cbb -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG62_CTRL2 0x0cbc -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG62_CTRL3 0x0cbd -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG63_CTRL1 0x0cbe -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL1_VS_UNTAGSET_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL1_VS_UNTAGSET_MASK 0xFF00 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL1_VS_SMBR_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL1_VS_SMBR_MASK 0xFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG63_CTRL2 0x0cbf -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL2_VS_FIDEN_OFFSET 7 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL2_VS_FIDEN_MASK 0x80 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL2_VS_SPRI_OFFSET 4 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL2_VS_SPRI_MASK 0x70 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL2_VS_FID_MSTI_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL2_VS_FID_MSTI_MASK 0xF - -#define RTL8367C_REG_SVLAN_MEMBERCFG63_CTRL3 0x0cc0 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL3_VS_EFID_OFFSET 13 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL3_VS_EFID_MASK 0xE000 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL3_VS_EFIDEN_OFFSET 12 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL3_VS_EFIDEN_MASK 0x1000 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL3_VS_SVID_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL3_VS_SVID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL4 0x0cc1 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG0_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG1_CTRL4 0x0cc2 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG1_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG2_CTRL4 0x0cc3 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG2_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG3_CTRL4 0x0cc4 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG3_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG4_CTRL4 0x0cc5 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG4_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG5_CTRL4 0x0cc6 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG5_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG6_CTRL4 0x0cc7 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG6_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG7_CTRL4 0x0cc8 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG7_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG8_CTRL4 0x0cc9 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG8_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG9_CTRL4 0x0cca -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG9_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG10_CTRL4 0x0ccb -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG10_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG11_CTRL4 0x0ccc -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG11_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG12_CTRL4 0x0ccd -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG12_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG13_CTRL4 0x0cce -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG13_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG14_CTRL4 0x0ccf -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG14_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG15_CTRL4 0x0cd0 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG15_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG16_CTRL4 0x0cd1 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG16_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG17_CTRL4 0x0cd2 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG17_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG18_CTRL4 0x0cd3 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG18_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG19_CTRL4 0x0cd4 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG19_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG20_CTRL4 0x0cd5 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG20_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG21_CTRL4 0x0cd6 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG21_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG22_CTRL4 0x0cd7 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG22_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG23_CTRL4 0x0cd8 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG23_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG24_CTRL4 0x0cd9 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG24_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG25_CTRL4 0x0cda -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG25_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG26_CTRL4 0x0cdb -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG26_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG27_CTRL4 0x0cdc -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG27_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG28_CTRL4 0x0cdd -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG28_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG29_CTRL4 0x0cde -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG29_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG30_CTRL4 0x0cdf -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG30_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG31_CTRL4 0x0ce0 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG31_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG32_CTRL4 0x0ce1 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG32_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG33_CTRL4 0x0ce2 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG33_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG34_CTRL4 0x0ce3 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG34_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG35_CTRL4 0x0ce4 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG35_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG36_CTRL4 0x0ce5 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG36_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG37_CTRL4 0x0ce6 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG37_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG38_CTRL4 0x0ce7 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG38_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG39_CTRL4 0x0ce8 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG39_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG40_CTRL4 0x0ce9 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG40_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG41_CTRL4 0x0cea -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG41_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG42_CTRL4 0x0ceb -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG42_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG43_CTRL4 0x0cec -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG43_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG44_CTRL4 0x0ced -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG44_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG45_CTRL4 0x0cee -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG45_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG46_CTRL4 0x0cef -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG46_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG47_CTRL4 0x0cf0 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG47_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG48_CTRL4 0x0cf1 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG48_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG49_CTRL4 0x0cf2 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG49_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG50_CTRL4 0x0cf3 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG50_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG51_CTRL4 0x0cf4 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG51_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG52_CTRL4 0x0cf5 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG52_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG53_CTRL4 0x0cf6 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG53_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG54_CTRL4 0x0cf7 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG54_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG55_CTRL4 0x0cf8 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG55_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG56_CTRL4 0x0cf9 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG56_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG57_CTRL4 0x0cfa -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG57_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG58_CTRL4 0x0cfb -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG58_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG59_CTRL4 0x0cfc -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG59_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG60_CTRL4 0x0cfd -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG60_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG61_CTRL4 0x0cfe -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG61_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_MEMBERCFG62_CTRL4 0x0cff -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG62_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_C2SCFG0_CTRL0 0x0d00 -#define RTL8367C_SVLAN_C2SCFG0_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG0_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG0_CTRL1 0x0d01 -#define RTL8367C_SVLAN_C2SCFG0_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG0_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG0_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG0_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG0_CTRL2 0x0d02 -#define RTL8367C_SVLAN_C2SCFG0_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG0_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG1_CTRL0 0x0d03 -#define RTL8367C_SVLAN_C2SCFG1_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG1_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG1_CTRL1 0x0d04 -#define RTL8367C_SVLAN_C2SCFG1_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG1_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG1_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG1_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG1_CTRL2 0x0d05 -#define RTL8367C_SVLAN_C2SCFG1_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG1_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG2_CTRL0 0x0d06 -#define RTL8367C_SVLAN_C2SCFG2_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG2_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG2_CTRL1 0x0d07 -#define RTL8367C_SVLAN_C2SCFG2_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG2_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG2_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG2_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG2_CTRL2 0x0d08 -#define RTL8367C_SVLAN_C2SCFG2_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG2_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG3_CTRL0 0x0d09 -#define RTL8367C_SVLAN_C2SCFG3_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG3_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG3_CTRL1 0x0d0a -#define RTL8367C_SVLAN_C2SCFG3_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG3_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG3_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG3_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG3_CTRL2 0x0d0b -#define RTL8367C_SVLAN_C2SCFG3_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG3_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG4_CTRL0 0x0d0c -#define RTL8367C_SVLAN_C2SCFG4_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG4_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG4_CTRL1 0x0d0d -#define RTL8367C_SVLAN_C2SCFG4_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG4_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG4_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG4_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG4_CTRL2 0x0d0e -#define RTL8367C_SVLAN_C2SCFG4_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG4_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG5_CTRL0 0x0d0f -#define RTL8367C_SVLAN_C2SCFG5_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG5_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG5_CTRL1 0x0d10 -#define RTL8367C_SVLAN_C2SCFG5_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG5_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG5_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG5_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG5_CTRL2 0x0d11 -#define RTL8367C_SVLAN_C2SCFG5_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG5_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG6_CTRL0 0x0d12 -#define RTL8367C_SVLAN_C2SCFG6_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG6_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG6_CTRL1 0x0d13 -#define RTL8367C_SVLAN_C2SCFG6_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG6_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG6_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG6_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG6_CTRL2 0x0d14 -#define RTL8367C_SVLAN_C2SCFG6_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG6_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG7_CTRL0 0x0d15 -#define RTL8367C_SVLAN_C2SCFG7_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG7_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG7_CTRL1 0x0d16 -#define RTL8367C_SVLAN_C2SCFG7_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG7_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG7_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG7_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG7_CTRL2 0x0d17 -#define RTL8367C_SVLAN_C2SCFG7_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG7_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG8_CTRL0 0x0d18 -#define RTL8367C_SVLAN_C2SCFG8_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG8_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG8_CTRL1 0x0d19 -#define RTL8367C_SVLAN_C2SCFG8_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG8_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG8_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG8_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG8_CTRL2 0x0d1a -#define RTL8367C_SVLAN_C2SCFG8_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG8_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG9_CTRL0 0x0d1b -#define RTL8367C_SVLAN_C2SCFG9_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG9_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG9_CTRL1 0x0d1c -#define RTL8367C_SVLAN_C2SCFG9_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG9_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG9_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG9_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG9_CTRL2 0x0d1d -#define RTL8367C_SVLAN_C2SCFG9_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG9_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG10_CTRL0 0x0d1e -#define RTL8367C_SVLAN_C2SCFG10_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG10_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG10_CTRL1 0x0d1f -#define RTL8367C_SVLAN_C2SCFG10_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG10_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG10_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG10_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG10_CTRL2 0x0d20 -#define RTL8367C_SVLAN_C2SCFG10_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG10_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG11_CTRL0 0x0d21 -#define RTL8367C_SVLAN_C2SCFG11_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG11_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG11_CTRL1 0x0d22 -#define RTL8367C_SVLAN_C2SCFG11_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG11_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG11_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG11_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG11_CTRL2 0x0d23 -#define RTL8367C_SVLAN_C2SCFG11_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG11_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG12_CTRL0 0x0d24 -#define RTL8367C_SVLAN_C2SCFG12_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG12_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG12_CTRL1 0x0d25 -#define RTL8367C_SVLAN_C2SCFG12_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG12_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG12_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG12_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG12_CTRL2 0x0d26 -#define RTL8367C_SVLAN_C2SCFG12_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG12_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG13_CTRL0 0x0d27 -#define RTL8367C_SVLAN_C2SCFG13_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG13_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG13_CTRL1 0x0d28 -#define RTL8367C_SVLAN_C2SCFG13_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG13_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG13_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG13_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG13_CTRL2 0x0d29 -#define RTL8367C_SVLAN_C2SCFG13_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG13_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG14_CTRL0 0x0d2a -#define RTL8367C_SVLAN_C2SCFG14_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG14_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG14_CTRL1 0x0d2b -#define RTL8367C_SVLAN_C2SCFG14_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG14_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG14_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG14_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG14_CTRL2 0x0d2c -#define RTL8367C_SVLAN_C2SCFG14_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG14_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG15_CTRL0 0x0d2d -#define RTL8367C_SVLAN_C2SCFG15_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG15_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG15_CTRL1 0x0d2e -#define RTL8367C_SVLAN_C2SCFG15_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG15_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG15_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG15_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG15_CTRL2 0x0d2f -#define RTL8367C_SVLAN_C2SCFG15_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG15_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG16_CTRL0 0x0d30 -#define RTL8367C_SVLAN_C2SCFG16_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG16_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG16_CTRL1 0x0d31 -#define RTL8367C_SVLAN_C2SCFG16_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG16_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG16_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG16_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG16_CTRL2 0x0d32 -#define RTL8367C_SVLAN_C2SCFG16_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG16_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG17_CTRL0 0x0d33 -#define RTL8367C_SVLAN_C2SCFG17_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG17_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG17_CTRL1 0x0d34 -#define RTL8367C_SVLAN_C2SCFG17_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG17_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG17_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG17_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG17_CTRL2 0x0d35 -#define RTL8367C_SVLAN_C2SCFG17_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG17_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG18_CTRL0 0x0d36 -#define RTL8367C_SVLAN_C2SCFG18_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG18_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG18_CTRL1 0x0d37 -#define RTL8367C_SVLAN_C2SCFG18_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG18_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG18_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG18_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG18_CTRL2 0x0d38 -#define RTL8367C_SVLAN_C2SCFG18_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG18_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG19_CTRL0 0x0d39 -#define RTL8367C_SVLAN_C2SCFG19_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG19_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG19_CTRL1 0x0d3a -#define RTL8367C_SVLAN_C2SCFG19_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG19_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG19_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG19_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG19_CTRL2 0x0d3b -#define RTL8367C_SVLAN_C2SCFG19_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG19_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG20_CTRL0 0x0d3c -#define RTL8367C_SVLAN_C2SCFG20_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG20_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG20_CTRL1 0x0d3d -#define RTL8367C_SVLAN_C2SCFG20_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG20_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG20_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG20_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG20_CTRL2 0x0d3e -#define RTL8367C_SVLAN_C2SCFG20_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG20_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG21_CTRL0 0x0d3f -#define RTL8367C_SVLAN_C2SCFG21_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG21_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG21_CTRL1 0x0d40 -#define RTL8367C_SVLAN_C2SCFG21_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG21_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG21_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG21_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG21_CTRL2 0x0d41 -#define RTL8367C_SVLAN_C2SCFG21_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG21_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG22_CTRL0 0x0d42 -#define RTL8367C_SVLAN_C2SCFG22_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG22_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG22_CTRL1 0x0d43 -#define RTL8367C_SVLAN_C2SCFG22_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG22_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG22_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG22_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG22_CTRL2 0x0d44 -#define RTL8367C_SVLAN_C2SCFG22_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG22_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG23_CTRL0 0x0d45 -#define RTL8367C_SVLAN_C2SCFG23_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG23_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG23_CTRL1 0x0d46 -#define RTL8367C_SVLAN_C2SCFG23_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG23_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG23_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG23_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG23_CTRL2 0x0d47 -#define RTL8367C_SVLAN_C2SCFG23_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG23_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG24_CTRL0 0x0d48 -#define RTL8367C_SVLAN_C2SCFG24_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG24_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG24_CTRL1 0x0d49 -#define RTL8367C_SVLAN_C2SCFG24_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG24_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG24_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG24_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG24_CTRL2 0x0d4a -#define RTL8367C_SVLAN_C2SCFG24_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG24_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG25_CTRL0 0x0d4b -#define RTL8367C_SVLAN_C2SCFG25_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG25_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG25_CTRL1 0x0d4c -#define RTL8367C_SVLAN_C2SCFG25_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG25_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG25_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG25_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG25_CTRL2 0x0d4d -#define RTL8367C_SVLAN_C2SCFG25_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG25_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG26_CTRL0 0x0d4e -#define RTL8367C_SVLAN_C2SCFG26_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG26_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG26_CTRL1 0x0d4f -#define RTL8367C_SVLAN_C2SCFG26_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG26_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG26_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG26_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG26_CTRL2 0x0d50 -#define RTL8367C_SVLAN_C2SCFG26_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG26_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG27_CTRL0 0x0d51 -#define RTL8367C_SVLAN_C2SCFG27_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG27_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG27_CTRL1 0x0d52 -#define RTL8367C_SVLAN_C2SCFG27_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG27_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG27_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG27_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG27_CTRL2 0x0d53 -#define RTL8367C_SVLAN_C2SCFG27_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG27_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG28_CTRL0 0x0d54 -#define RTL8367C_SVLAN_C2SCFG28_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG28_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG28_CTRL1 0x0d55 -#define RTL8367C_SVLAN_C2SCFG28_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG28_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG28_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG28_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG28_CTRL2 0x0d56 -#define RTL8367C_SVLAN_C2SCFG28_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG28_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG29_CTRL0 0x0d57 -#define RTL8367C_SVLAN_C2SCFG29_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG29_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG29_CTRL1 0x0d58 -#define RTL8367C_SVLAN_C2SCFG29_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG29_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG29_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG29_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG29_CTRL2 0x0d59 -#define RTL8367C_SVLAN_C2SCFG29_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG29_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG30_CTRL0 0x0d5a -#define RTL8367C_SVLAN_C2SCFG30_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG30_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG30_CTRL1 0x0d5b -#define RTL8367C_SVLAN_C2SCFG30_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG30_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG30_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG30_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG30_CTRL2 0x0d5c -#define RTL8367C_SVLAN_C2SCFG30_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG30_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG31_CTRL0 0x0d5d -#define RTL8367C_SVLAN_C2SCFG31_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG31_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG31_CTRL1 0x0d5e -#define RTL8367C_SVLAN_C2SCFG31_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG31_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG31_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG31_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG31_CTRL2 0x0d5f -#define RTL8367C_SVLAN_C2SCFG31_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG31_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG32_CTRL0 0x0d60 -#define RTL8367C_SVLAN_C2SCFG32_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG32_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG32_CTRL1 0x0d61 -#define RTL8367C_SVLAN_C2SCFG32_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG32_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG32_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG32_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG32_CTRL2 0x0d62 -#define RTL8367C_SVLAN_C2SCFG32_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG32_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG33_CTRL0 0x0d63 -#define RTL8367C_SVLAN_C2SCFG33_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG33_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG33_CTRL1 0x0d64 -#define RTL8367C_SVLAN_C2SCFG33_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG33_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG33_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG33_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG33_CTRL2 0x0d65 -#define RTL8367C_SVLAN_C2SCFG33_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG33_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG34_CTRL0 0x0d66 -#define RTL8367C_SVLAN_C2SCFG34_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG34_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG34_CTRL1 0x0d67 -#define RTL8367C_SVLAN_C2SCFG34_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG34_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG34_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG34_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG34_CTRL2 0x0d68 -#define RTL8367C_SVLAN_C2SCFG34_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG34_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG35_CTRL0 0x0d69 -#define RTL8367C_SVLAN_C2SCFG35_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG35_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG35_CTRL1 0x0d6a -#define RTL8367C_SVLAN_C2SCFG35_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG35_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG35_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG35_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG35_CTRL2 0x0d6b -#define RTL8367C_SVLAN_C2SCFG35_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG35_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG36_CTRL0 0x0d6c -#define RTL8367C_SVLAN_C2SCFG36_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG36_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG36_CTRL1 0x0d6d -#define RTL8367C_SVLAN_C2SCFG36_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG36_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG36_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG36_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG36_CTRL2 0x0d6e -#define RTL8367C_SVLAN_C2SCFG36_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG36_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG37_CTRL0 0x0d6f -#define RTL8367C_SVLAN_C2SCFG37_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG37_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG37_CTRL1 0x0d70 -#define RTL8367C_SVLAN_C2SCFG37_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG37_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG37_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG37_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG37_CTRL2 0x0d71 -#define RTL8367C_SVLAN_C2SCFG37_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG37_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG38_CTRL0 0x0d72 -#define RTL8367C_SVLAN_C2SCFG38_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG38_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG38_CTRL1 0x0d73 -#define RTL8367C_SVLAN_C2SCFG38_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG38_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG38_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG38_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG38_CTRL2 0x0d74 -#define RTL8367C_SVLAN_C2SCFG38_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG38_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG39_CTRL0 0x0d75 -#define RTL8367C_SVLAN_C2SCFG39_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG39_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG39_CTRL1 0x0d76 -#define RTL8367C_SVLAN_C2SCFG39_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG39_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG39_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG39_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG39_CTRL2 0x0d77 -#define RTL8367C_SVLAN_C2SCFG39_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG39_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG40_CTRL0 0x0d78 -#define RTL8367C_SVLAN_C2SCFG40_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG40_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG40_CTRL1 0x0d79 -#define RTL8367C_SVLAN_C2SCFG40_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG40_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG40_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG40_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG40_CTRL2 0x0d7a -#define RTL8367C_SVLAN_C2SCFG40_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG40_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG41_CTRL0 0x0d7b -#define RTL8367C_SVLAN_C2SCFG41_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG41_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG41_CTRL1 0x0d7c -#define RTL8367C_SVLAN_C2SCFG41_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG41_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG41_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG41_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG41_CTRL2 0x0d7d -#define RTL8367C_SVLAN_C2SCFG41_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG41_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG42_CTRL0 0x0d7e -#define RTL8367C_SVLAN_C2SCFG42_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG42_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG42_CTRL1 0x0d7f -#define RTL8367C_SVLAN_C2SCFG42_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG42_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG42_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG42_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG42_CTRL2 0x0d80 -#define RTL8367C_SVLAN_C2SCFG42_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG42_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG43_CTRL0 0x0d81 -#define RTL8367C_SVLAN_C2SCFG43_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG43_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG43_CTRL1 0x0d82 -#define RTL8367C_SVLAN_C2SCFG43_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG43_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG43_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG43_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG43_CTRL2 0x0d83 -#define RTL8367C_SVLAN_C2SCFG43_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG43_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG44_CTRL0 0x0d84 -#define RTL8367C_SVLAN_C2SCFG44_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG44_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG44_CTRL1 0x0d85 -#define RTL8367C_SVLAN_C2SCFG44_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG44_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG44_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG44_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG44_CTRL2 0x0d86 -#define RTL8367C_SVLAN_C2SCFG44_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG44_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG45_CTRL0 0x0d87 -#define RTL8367C_SVLAN_C2SCFG45_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG45_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG45_CTRL1 0x0d88 -#define RTL8367C_SVLAN_C2SCFG45_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG45_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG45_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG45_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG45_CTRL2 0x0d89 -#define RTL8367C_SVLAN_C2SCFG45_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG45_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG46_CTRL0 0x0d8a -#define RTL8367C_SVLAN_C2SCFG46_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG46_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG46_CTRL1 0x0d8b -#define RTL8367C_SVLAN_C2SCFG46_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG46_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG46_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG46_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG46_CTRL2 0x0d8c -#define RTL8367C_SVLAN_C2SCFG46_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG46_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG47_CTRL0 0x0d8d -#define RTL8367C_SVLAN_C2SCFG47_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG47_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG47_CTRL1 0x0d8e -#define RTL8367C_SVLAN_C2SCFG47_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG47_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG47_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG47_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG47_CTRL2 0x0d8f -#define RTL8367C_SVLAN_C2SCFG47_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG47_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG48_CTRL0 0x0d90 -#define RTL8367C_SVLAN_C2SCFG48_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG48_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG48_CTRL1 0x0d91 -#define RTL8367C_SVLAN_C2SCFG48_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG48_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG48_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG48_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG48_CTRL2 0x0d92 -#define RTL8367C_SVLAN_C2SCFG48_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG48_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG49_CTRL0 0x0d93 -#define RTL8367C_SVLAN_C2SCFG49_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG49_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG49_CTRL1 0x0d94 -#define RTL8367C_SVLAN_C2SCFG49_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG49_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG49_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG49_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG49_CTRL2 0x0d95 -#define RTL8367C_SVLAN_C2SCFG49_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG49_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG50_CTRL0 0x0d96 -#define RTL8367C_SVLAN_C2SCFG50_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG50_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG50_CTRL1 0x0d97 -#define RTL8367C_SVLAN_C2SCFG50_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG50_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG50_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG50_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG50_CTRL2 0x0d98 -#define RTL8367C_SVLAN_C2SCFG50_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG50_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG51_CTRL0 0x0d99 -#define RTL8367C_SVLAN_C2SCFG51_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG51_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG51_CTRL1 0x0d9a -#define RTL8367C_SVLAN_C2SCFG51_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG51_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG51_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG51_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG51_CTRL2 0x0d9b -#define RTL8367C_SVLAN_C2SCFG51_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG51_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG52_CTRL0 0x0d9c -#define RTL8367C_SVLAN_C2SCFG52_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG52_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG52_CTRL1 0x0d9d -#define RTL8367C_SVLAN_C2SCFG52_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG52_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG52_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG52_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG52_CTRL2 0x0d9e -#define RTL8367C_SVLAN_C2SCFG52_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG52_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG53_CTRL0 0x0d9f -#define RTL8367C_SVLAN_C2SCFG53_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG53_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG53_CTRL1 0x0da0 -#define RTL8367C_SVLAN_C2SCFG53_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG53_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG53_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG53_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG53_CTRL2 0x0da1 -#define RTL8367C_SVLAN_C2SCFG53_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG53_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG54_CTRL0 0x0da2 -#define RTL8367C_SVLAN_C2SCFG54_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG54_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG54_CTRL1 0x0da3 -#define RTL8367C_SVLAN_C2SCFG54_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG54_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG54_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG54_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG54_CTRL2 0x0da4 -#define RTL8367C_SVLAN_C2SCFG54_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG54_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG55_CTRL0 0x0da5 -#define RTL8367C_SVLAN_C2SCFG55_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG55_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG55_CTRL1 0x0da6 -#define RTL8367C_SVLAN_C2SCFG55_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG55_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG55_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG55_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG55_CTRL2 0x0da7 -#define RTL8367C_SVLAN_C2SCFG55_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG55_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG56_CTRL0 0x0da8 -#define RTL8367C_SVLAN_C2SCFG56_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG56_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG56_CTRL1 0x0da9 -#define RTL8367C_SVLAN_C2SCFG56_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG56_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG56_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG56_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG56_CTRL2 0x0daa -#define RTL8367C_SVLAN_C2SCFG56_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG56_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG57_CTRL0 0x0dab -#define RTL8367C_SVLAN_C2SCFG57_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG57_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG57_CTRL1 0x0dac -#define RTL8367C_SVLAN_C2SCFG57_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG57_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG57_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG57_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG57_CTRL2 0x0dad -#define RTL8367C_SVLAN_C2SCFG57_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG57_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG58_CTRL0 0x0dae -#define RTL8367C_SVLAN_C2SCFG58_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG58_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG58_CTRL1 0x0daf -#define RTL8367C_SVLAN_C2SCFG58_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG58_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG58_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG58_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG58_CTRL2 0x0db0 -#define RTL8367C_SVLAN_C2SCFG58_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG58_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG59_CTRL0 0x0db1 -#define RTL8367C_SVLAN_C2SCFG59_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG59_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG59_CTRL1 0x0db2 -#define RTL8367C_SVLAN_C2SCFG59_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG59_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG59_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG59_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG59_CTRL2 0x0db3 -#define RTL8367C_SVLAN_C2SCFG59_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG59_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG60_CTRL0 0x0db4 -#define RTL8367C_SVLAN_C2SCFG60_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG60_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG60_CTRL1 0x0db5 -#define RTL8367C_SVLAN_C2SCFG60_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG60_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG60_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG60_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG60_CTRL2 0x0db6 -#define RTL8367C_SVLAN_C2SCFG60_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG60_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG61_CTRL0 0x0db7 -#define RTL8367C_SVLAN_C2SCFG61_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG61_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG61_CTRL1 0x0db8 -#define RTL8367C_SVLAN_C2SCFG61_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG61_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG61_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG61_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG61_CTRL2 0x0db9 -#define RTL8367C_SVLAN_C2SCFG61_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG61_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG62_CTRL0 0x0dba -#define RTL8367C_SVLAN_C2SCFG62_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG62_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG62_CTRL1 0x0dbb -#define RTL8367C_SVLAN_C2SCFG62_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG62_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG62_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG62_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG62_CTRL2 0x0dbc -#define RTL8367C_SVLAN_C2SCFG62_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG62_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG63_CTRL0 0x0dbd -#define RTL8367C_SVLAN_C2SCFG63_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG63_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG63_CTRL1 0x0dbe -#define RTL8367C_SVLAN_C2SCFG63_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG63_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG63_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG63_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG63_CTRL2 0x0dbf -#define RTL8367C_SVLAN_C2SCFG63_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG63_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG64_CTRL0 0x0dc0 -#define RTL8367C_SVLAN_C2SCFG64_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG64_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG64_CTRL1 0x0dc1 -#define RTL8367C_SVLAN_C2SCFG64_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG64_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG64_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG64_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG64_CTRL2 0x0dc2 -#define RTL8367C_SVLAN_C2SCFG64_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG64_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG65_CTRL0 0x0dc3 -#define RTL8367C_SVLAN_C2SCFG65_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG65_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG65_CTRL1 0x0dc4 -#define RTL8367C_SVLAN_C2SCFG65_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG65_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG65_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG65_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG65_CTRL2 0x0dc5 -#define RTL8367C_SVLAN_C2SCFG65_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG65_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG66_CTRL0 0x0dc6 -#define RTL8367C_SVLAN_C2SCFG66_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG66_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG66_CTRL1 0x0dc7 -#define RTL8367C_SVLAN_C2SCFG66_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG66_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG66_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG66_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG66_CTRL2 0x0dc8 -#define RTL8367C_SVLAN_C2SCFG66_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG66_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG67_CTRL0 0x0dc9 -#define RTL8367C_SVLAN_C2SCFG67_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG67_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG67_CTRL1 0x0dca -#define RTL8367C_SVLAN_C2SCFG67_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG67_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG67_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG67_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG67_CTRL2 0x0dcb -#define RTL8367C_SVLAN_C2SCFG67_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG67_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG68_CTRL0 0x0dcc -#define RTL8367C_SVLAN_C2SCFG68_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG68_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG68_CTRL1 0x0dcd -#define RTL8367C_SVLAN_C2SCFG68_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG68_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG68_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG68_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG68_CTRL2 0x0dce -#define RTL8367C_SVLAN_C2SCFG68_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG68_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG69_CTRL0 0x0dcf -#define RTL8367C_SVLAN_C2SCFG69_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG69_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG69_CTRL1 0x0dd0 -#define RTL8367C_SVLAN_C2SCFG69_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG69_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG69_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG69_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG69_CTRL2 0x0dd1 -#define RTL8367C_SVLAN_C2SCFG69_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG69_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG70_CTRL0 0x0dd2 -#define RTL8367C_SVLAN_C2SCFG70_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG70_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG70_CTRL1 0x0dd3 -#define RTL8367C_SVLAN_C2SCFG70_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG70_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG70_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG70_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG70_CTRL2 0x0dd4 -#define RTL8367C_SVLAN_C2SCFG70_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG70_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG71_CTRL0 0x0dd5 -#define RTL8367C_SVLAN_C2SCFG71_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG71_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG71_CTRL1 0x0dd6 -#define RTL8367C_SVLAN_C2SCFG71_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG71_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG71_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG71_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG71_CTRL2 0x0dd7 -#define RTL8367C_SVLAN_C2SCFG71_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG71_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG72_CTRL0 0x0dd8 -#define RTL8367C_SVLAN_C2SCFG72_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG72_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG72_CTRL1 0x0dd9 -#define RTL8367C_SVLAN_C2SCFG72_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG72_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG72_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG72_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG72_CTRL2 0x0dda -#define RTL8367C_SVLAN_C2SCFG72_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG72_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG73_CTRL0 0x0ddb -#define RTL8367C_SVLAN_C2SCFG73_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG73_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG73_CTRL1 0x0ddc -#define RTL8367C_SVLAN_C2SCFG73_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG73_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG73_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG73_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG73_CTRL2 0x0ddd -#define RTL8367C_SVLAN_C2SCFG73_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG73_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG74_CTRL0 0x0dde -#define RTL8367C_SVLAN_C2SCFG74_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG74_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG74_CTRL1 0x0ddf -#define RTL8367C_SVLAN_C2SCFG74_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG74_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG74_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG74_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG74_CTRL2 0x0de0 -#define RTL8367C_SVLAN_C2SCFG74_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG74_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG75_CTRL0 0x0de1 -#define RTL8367C_SVLAN_C2SCFG75_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG75_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG75_CTRL1 0x0de2 -#define RTL8367C_SVLAN_C2SCFG75_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG75_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG75_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG75_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG75_CTRL2 0x0de3 -#define RTL8367C_SVLAN_C2SCFG75_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG75_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG76_CTRL0 0x0de4 -#define RTL8367C_SVLAN_C2SCFG76_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG76_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG76_CTRL1 0x0de5 -#define RTL8367C_SVLAN_C2SCFG76_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG76_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG76_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG76_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG76_CTRL2 0x0de6 -#define RTL8367C_SVLAN_C2SCFG76_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG76_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG77_CTRL0 0x0de7 -#define RTL8367C_SVLAN_C2SCFG77_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG77_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG77_CTRL1 0x0de8 -#define RTL8367C_SVLAN_C2SCFG77_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG77_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG77_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG77_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG77_CTRL2 0x0de9 -#define RTL8367C_SVLAN_C2SCFG77_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG77_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG78_CTRL0 0x0dea -#define RTL8367C_SVLAN_C2SCFG78_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG78_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG78_CTRL1 0x0deb -#define RTL8367C_SVLAN_C2SCFG78_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG78_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG78_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG78_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG78_CTRL2 0x0dec -#define RTL8367C_SVLAN_C2SCFG78_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG78_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG79_CTRL0 0x0ded -#define RTL8367C_SVLAN_C2SCFG79_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG79_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG79_CTRL1 0x0dee -#define RTL8367C_SVLAN_C2SCFG79_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG79_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG79_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG79_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG79_CTRL2 0x0def -#define RTL8367C_SVLAN_C2SCFG79_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG79_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG80_CTRL0 0x0df0 -#define RTL8367C_SVLAN_C2SCFG80_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG80_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG80_CTRL1 0x0df1 -#define RTL8367C_SVLAN_C2SCFG80_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG80_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG80_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG80_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG80_CTRL2 0x0df2 -#define RTL8367C_SVLAN_C2SCFG80_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG80_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG81_CTRL0 0x0df3 -#define RTL8367C_SVLAN_C2SCFG81_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG81_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG81_CTRL1 0x0df4 -#define RTL8367C_SVLAN_C2SCFG81_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG81_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG81_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG81_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG81_CTRL2 0x0df5 -#define RTL8367C_SVLAN_C2SCFG81_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG81_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG82_CTRL0 0x0df6 -#define RTL8367C_SVLAN_C2SCFG82_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG82_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG82_CTRL1 0x0df7 -#define RTL8367C_SVLAN_C2SCFG82_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG82_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG82_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG82_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG82_CTRL2 0x0df8 -#define RTL8367C_SVLAN_C2SCFG82_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG82_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG83_CTRL0 0x0df9 -#define RTL8367C_SVLAN_C2SCFG83_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG83_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG83_CTRL1 0x0dfa -#define RTL8367C_SVLAN_C2SCFG83_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG83_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG83_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG83_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG83_CTRL2 0x0dfb -#define RTL8367C_SVLAN_C2SCFG83_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG83_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG84_CTRL0 0x0dfc -#define RTL8367C_SVLAN_C2SCFG84_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG84_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG84_CTRL1 0x0dfd -#define RTL8367C_SVLAN_C2SCFG84_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG84_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG84_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG84_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG84_CTRL2 0x0dfe -#define RTL8367C_SVLAN_C2SCFG84_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG84_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG85_CTRL0 0x0dff -#define RTL8367C_SVLAN_C2SCFG85_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG85_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG85_CTRL1 0x0e00 -#define RTL8367C_SVLAN_C2SCFG85_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG85_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG85_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG85_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG85_CTRL2 0x0e01 -#define RTL8367C_SVLAN_C2SCFG85_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG85_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG86_CTRL0 0x0e02 -#define RTL8367C_SVLAN_C2SCFG86_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG86_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG86_CTRL1 0x0e03 -#define RTL8367C_SVLAN_C2SCFG86_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG86_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG86_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG86_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG86_CTRL2 0x0e04 -#define RTL8367C_SVLAN_C2SCFG86_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG86_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG87_CTRL0 0x0e05 -#define RTL8367C_SVLAN_C2SCFG87_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG87_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG87_CTRL1 0x0e06 -#define RTL8367C_SVLAN_C2SCFG87_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG87_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG87_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG87_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG87_CTRL2 0x0e07 -#define RTL8367C_SVLAN_C2SCFG87_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG87_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG88_CTRL0 0x0e08 -#define RTL8367C_SVLAN_C2SCFG88_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG88_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG88_CTRL1 0x0e09 -#define RTL8367C_SVLAN_C2SCFG88_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG88_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG88_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG88_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG88_CTRL2 0x0e0a -#define RTL8367C_SVLAN_C2SCFG88_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG88_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG89_CTRL0 0x0e0b -#define RTL8367C_SVLAN_C2SCFG89_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG89_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG89_CTRL1 0x0e0c -#define RTL8367C_SVLAN_C2SCFG89_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG89_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG89_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG89_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG89_CTRL2 0x0e0d -#define RTL8367C_SVLAN_C2SCFG89_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG89_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG90_CTRL0 0x0e0e -#define RTL8367C_SVLAN_C2SCFG90_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG90_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG90_CTRL1 0x0e0f -#define RTL8367C_SVLAN_C2SCFG90_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG90_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG90_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG90_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG90_CTRL2 0x0e10 -#define RTL8367C_SVLAN_C2SCFG90_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG90_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG91_CTRL0 0x0e11 -#define RTL8367C_SVLAN_C2SCFG91_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG91_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG91_CTRL1 0x0e12 -#define RTL8367C_SVLAN_C2SCFG91_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG91_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG91_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG91_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG91_CTRL2 0x0e13 -#define RTL8367C_SVLAN_C2SCFG91_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG91_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG92_CTRL0 0x0e14 -#define RTL8367C_SVLAN_C2SCFG92_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG92_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG92_CTRL1 0x0e15 -#define RTL8367C_SVLAN_C2SCFG92_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG92_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG92_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG92_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG92_CTRL2 0x0e16 -#define RTL8367C_SVLAN_C2SCFG92_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG92_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG93_CTRL0 0x0e17 -#define RTL8367C_SVLAN_C2SCFG93_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG93_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG93_CTRL1 0x0e18 -#define RTL8367C_SVLAN_C2SCFG93_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG93_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG93_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG93_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG93_CTRL2 0x0e19 -#define RTL8367C_SVLAN_C2SCFG93_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG93_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG94_CTRL0 0x0e1a -#define RTL8367C_SVLAN_C2SCFG94_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG94_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG94_CTRL1 0x0e1b -#define RTL8367C_SVLAN_C2SCFG94_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG94_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG94_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG94_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG94_CTRL2 0x0e1c -#define RTL8367C_SVLAN_C2SCFG94_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG94_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG95_CTRL0 0x0e1d -#define RTL8367C_SVLAN_C2SCFG95_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG95_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG95_CTRL1 0x0e1e -#define RTL8367C_SVLAN_C2SCFG95_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG95_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG95_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG95_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG95_CTRL2 0x0e1f -#define RTL8367C_SVLAN_C2SCFG95_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG95_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG96_CTRL0 0x0e20 -#define RTL8367C_SVLAN_C2SCFG96_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG96_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG96_CTRL1 0x0e21 -#define RTL8367C_SVLAN_C2SCFG96_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG96_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG96_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG96_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG96_CTRL2 0x0e22 -#define RTL8367C_SVLAN_C2SCFG96_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG96_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG97_CTRL0 0x0e23 -#define RTL8367C_SVLAN_C2SCFG97_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG97_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG97_CTRL1 0x0e24 -#define RTL8367C_SVLAN_C2SCFG97_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG97_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG97_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG97_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG97_CTRL2 0x0e25 -#define RTL8367C_SVLAN_C2SCFG97_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG97_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG98_CTRL0 0x0e26 -#define RTL8367C_SVLAN_C2SCFG98_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG98_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG98_CTRL1 0x0e27 -#define RTL8367C_SVLAN_C2SCFG98_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG98_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG98_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG98_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG98_CTRL2 0x0e28 -#define RTL8367C_SVLAN_C2SCFG98_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG98_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG99_CTRL0 0x0e29 -#define RTL8367C_SVLAN_C2SCFG99_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG99_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG99_CTRL1 0x0e2a -#define RTL8367C_SVLAN_C2SCFG99_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG99_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG99_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG99_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG99_CTRL2 0x0e2b -#define RTL8367C_SVLAN_C2SCFG99_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG99_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG100_CTRL0 0x0e2c -#define RTL8367C_SVLAN_C2SCFG100_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG100_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG100_CTRL1 0x0e2d -#define RTL8367C_SVLAN_C2SCFG100_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG100_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG100_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG100_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG100_CTRL2 0x0e2e -#define RTL8367C_SVLAN_C2SCFG100_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG100_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG101_CTRL0 0x0e2f -#define RTL8367C_SVLAN_C2SCFG101_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG101_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG101_CTRL1 0x0e30 -#define RTL8367C_SVLAN_C2SCFG101_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG101_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG101_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG101_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG101_CTRL2 0x0e31 -#define RTL8367C_SVLAN_C2SCFG101_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG101_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG102_CTRL0 0x0e32 -#define RTL8367C_SVLAN_C2SCFG102_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG102_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG102_CTRL1 0x0e33 -#define RTL8367C_SVLAN_C2SCFG102_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG102_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG102_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG102_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG102_CTRL2 0x0e34 -#define RTL8367C_SVLAN_C2SCFG102_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG102_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG103_CTRL0 0x0e35 -#define RTL8367C_SVLAN_C2SCFG103_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG103_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG103_CTRL1 0x0e36 -#define RTL8367C_SVLAN_C2SCFG103_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG103_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG103_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG103_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG103_CTRL2 0x0e37 -#define RTL8367C_SVLAN_C2SCFG103_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG103_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG104_CTRL0 0x0e38 -#define RTL8367C_SVLAN_C2SCFG104_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG104_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG104_CTRL1 0x0e39 -#define RTL8367C_SVLAN_C2SCFG104_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG104_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG104_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG104_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG104_CTRL2 0x0e3a -#define RTL8367C_SVLAN_C2SCFG104_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG104_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG105_CTRL0 0x0e3b -#define RTL8367C_SVLAN_C2SCFG105_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG105_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG105_CTRL1 0x0e3c -#define RTL8367C_SVLAN_C2SCFG105_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG105_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG105_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG105_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG105_CTRL2 0x0e3d -#define RTL8367C_SVLAN_C2SCFG105_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG105_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG106_CTRL0 0x0e3e -#define RTL8367C_SVLAN_C2SCFG106_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG106_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG106_CTRL1 0x0e3f -#define RTL8367C_SVLAN_C2SCFG106_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG106_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG106_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG106_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG106_CTRL2 0x0e40 -#define RTL8367C_SVLAN_C2SCFG106_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG106_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG107_CTRL0 0x0e41 -#define RTL8367C_SVLAN_C2SCFG107_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG107_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG107_CTRL1 0x0e42 -#define RTL8367C_SVLAN_C2SCFG107_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG107_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG107_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG107_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG107_CTRL2 0x0e43 -#define RTL8367C_SVLAN_C2SCFG107_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG107_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG108_CTRL0 0x0e44 -#define RTL8367C_SVLAN_C2SCFG108_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG108_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG108_CTRL1 0x0e45 -#define RTL8367C_SVLAN_C2SCFG108_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG108_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG108_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG108_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG108_CTRL2 0x0e46 -#define RTL8367C_SVLAN_C2SCFG108_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG108_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG109_CTRL0 0x0e47 -#define RTL8367C_SVLAN_C2SCFG109_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG109_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG109_CTRL1 0x0e48 -#define RTL8367C_SVLAN_C2SCFG109_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG109_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG109_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG109_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG109_CTRL2 0x0e49 -#define RTL8367C_SVLAN_C2SCFG109_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG109_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG110_CTRL0 0x0e4a -#define RTL8367C_SVLAN_C2SCFG110_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG110_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG110_CTRL1 0x0e4b -#define RTL8367C_SVLAN_C2SCFG110_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG110_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG110_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG110_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG110_CTRL2 0x0e4c -#define RTL8367C_SVLAN_C2SCFG110_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG110_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG111_CTRL0 0x0e4d -#define RTL8367C_SVLAN_C2SCFG111_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG111_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG111_CTRL1 0x0e4e -#define RTL8367C_SVLAN_C2SCFG111_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG111_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG111_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG111_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG111_CTRL2 0x0e4f -#define RTL8367C_SVLAN_C2SCFG111_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG111_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG112_CTRL0 0x0e50 -#define RTL8367C_SVLAN_C2SCFG112_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG112_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG112_CTRL1 0x0e51 -#define RTL8367C_SVLAN_C2SCFG112_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG112_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG112_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG112_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG112_CTRL2 0x0e52 -#define RTL8367C_SVLAN_C2SCFG112_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG112_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG113_CTRL0 0x0e53 -#define RTL8367C_SVLAN_C2SCFG113_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG113_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG113_CTRL1 0x0e54 -#define RTL8367C_SVLAN_C2SCFG113_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG113_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG113_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG113_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG113_CTRL2 0x0e55 -#define RTL8367C_SVLAN_C2SCFG113_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG113_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG114_CTRL0 0x0e56 -#define RTL8367C_SVLAN_C2SCFG114_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG114_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG114_CTRL1 0x0e57 -#define RTL8367C_SVLAN_C2SCFG114_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG114_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG114_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG114_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG114_CTRL2 0x0e58 -#define RTL8367C_SVLAN_C2SCFG114_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG114_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG115_CTRL0 0x0e59 -#define RTL8367C_SVLAN_C2SCFG115_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG115_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG115_CTRL1 0x0e5a -#define RTL8367C_SVLAN_C2SCFG115_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG115_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG115_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG115_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG115_CTRL2 0x0e5b -#define RTL8367C_SVLAN_C2SCFG115_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG115_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG116_CTRL0 0x0e5c -#define RTL8367C_SVLAN_C2SCFG116_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG116_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG116_CTRL1 0x0e5d -#define RTL8367C_SVLAN_C2SCFG116_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG116_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG116_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG116_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG116_CTRL2 0x0e5e -#define RTL8367C_SVLAN_C2SCFG116_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG116_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG117_CTRL0 0x0e5f -#define RTL8367C_SVLAN_C2SCFG117_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG117_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG117_CTRL1 0x0e60 -#define RTL8367C_SVLAN_C2SCFG117_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG117_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG117_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG117_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG117_CTRL2 0x0e61 -#define RTL8367C_SVLAN_C2SCFG117_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG117_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG118_CTRL0 0x0e62 -#define RTL8367C_SVLAN_C2SCFG118_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG118_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG118_CTRL1 0x0e63 -#define RTL8367C_SVLAN_C2SCFG118_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG118_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG118_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG118_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG118_CTRL2 0x0e64 -#define RTL8367C_SVLAN_C2SCFG118_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG118_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG119_CTRL0 0x0e65 -#define RTL8367C_SVLAN_C2SCFG119_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG119_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG119_CTRL1 0x0e66 -#define RTL8367C_SVLAN_C2SCFG119_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG119_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG119_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG119_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG119_CTRL2 0x0e67 -#define RTL8367C_SVLAN_C2SCFG119_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG119_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG120_CTRL0 0x0e68 -#define RTL8367C_SVLAN_C2SCFG120_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG120_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG120_CTRL1 0x0e69 -#define RTL8367C_SVLAN_C2SCFG120_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG120_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG120_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG120_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG120_CTRL2 0x0e6a -#define RTL8367C_SVLAN_C2SCFG120_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG120_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG121_CTRL0 0x0e6b -#define RTL8367C_SVLAN_C2SCFG121_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG121_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG121_CTRL1 0x0e6c -#define RTL8367C_SVLAN_C2SCFG121_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG121_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG121_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG121_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG121_CTRL2 0x0e6d -#define RTL8367C_SVLAN_C2SCFG121_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG121_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG122_CTRL0 0x0e6e -#define RTL8367C_SVLAN_C2SCFG122_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG122_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG122_CTRL1 0x0e6f -#define RTL8367C_SVLAN_C2SCFG122_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG122_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG122_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG122_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG122_CTRL2 0x0e70 -#define RTL8367C_SVLAN_C2SCFG122_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG122_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG123_CTRL0 0x0e71 -#define RTL8367C_SVLAN_C2SCFG123_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG123_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG123_CTRL1 0x0e72 -#define RTL8367C_SVLAN_C2SCFG123_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG123_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG123_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG123_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG123_CTRL2 0x0e73 -#define RTL8367C_SVLAN_C2SCFG123_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG123_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG124_CTRL0 0x0e74 -#define RTL8367C_SVLAN_C2SCFG124_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG124_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG124_CTRL1 0x0e75 -#define RTL8367C_SVLAN_C2SCFG124_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG124_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG124_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG124_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG124_CTRL2 0x0e76 -#define RTL8367C_SVLAN_C2SCFG124_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG124_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG125_CTRL0 0x0e77 -#define RTL8367C_SVLAN_C2SCFG125_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG125_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG125_CTRL1 0x0e78 -#define RTL8367C_SVLAN_C2SCFG125_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG125_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG125_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG125_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG125_CTRL2 0x0e79 -#define RTL8367C_SVLAN_C2SCFG125_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG125_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG126_CTRL0 0x0e7a -#define RTL8367C_SVLAN_C2SCFG126_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG126_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG126_CTRL1 0x0e7b -#define RTL8367C_SVLAN_C2SCFG126_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG126_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG126_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG126_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG126_CTRL2 0x0e7c -#define RTL8367C_SVLAN_C2SCFG126_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG126_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_C2SCFG127_CTRL0 0x0e7d -#define RTL8367C_SVLAN_C2SCFG127_CTRL0_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG127_CTRL0_MASK 0x3F - -#define RTL8367C_REG_SVLAN_C2SCFG127_CTRL1 0x0e7e -#define RTL8367C_SVLAN_C2SCFG127_CTRL1_C2SENPMSK_EXT_OFFSET 8 -#define RTL8367C_SVLAN_C2SCFG127_CTRL1_C2SENPMSK_EXT_MASK 0x700 -#define RTL8367C_SVLAN_C2SCFG127_CTRL1_C2SENPMSK_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG127_CTRL1_C2SENPMSK_MASK 0xFF - -#define RTL8367C_REG_SVLAN_C2SCFG127_CTRL2 0x0e7f -#define RTL8367C_SVLAN_C2SCFG127_CTRL2_OFFSET 0 -#define RTL8367C_SVLAN_C2SCFG127_CTRL2_MASK 0x1FFF - -#define RTL8367C_REG_SVLAN_CFG 0x0e80 -#define RTL8367C_VS_PORT7_DMACVIDSEL_OFFSET 14 -#define RTL8367C_VS_PORT7_DMACVIDSEL_MASK 0x4000 -#define RTL8367C_VS_PORT6_DMACVIDSEL_OFFSET 13 -#define RTL8367C_VS_PORT6_DMACVIDSEL_MASK 0x2000 -#define RTL8367C_VS_PORT5_DMACVIDSEL_OFFSET 12 -#define RTL8367C_VS_PORT5_DMACVIDSEL_MASK 0x1000 -#define RTL8367C_VS_PORT4_DMACVIDSEL_OFFSET 11 -#define RTL8367C_VS_PORT4_DMACVIDSEL_MASK 0x800 -#define RTL8367C_VS_PORT3_DMACVIDSEL_OFFSET 10 -#define RTL8367C_VS_PORT3_DMACVIDSEL_MASK 0x400 -#define RTL8367C_VS_PORT2_DMACVIDSEL_OFFSET 9 -#define RTL8367C_VS_PORT2_DMACVIDSEL_MASK 0x200 -#define RTL8367C_VS_PORT1_DMACVIDSEL_OFFSET 8 -#define RTL8367C_VS_PORT1_DMACVIDSEL_MASK 0x100 -#define RTL8367C_VS_PORT0_DMACVIDSEL_OFFSET 7 -#define RTL8367C_VS_PORT0_DMACVIDSEL_MASK 0x80 -#define RTL8367C_VS_UIFSEG_OFFSET 6 -#define RTL8367C_VS_UIFSEG_MASK 0x40 -#define RTL8367C_VS_UNMAT_OFFSET 4 -#define RTL8367C_VS_UNMAT_MASK 0x30 -#define RTL8367C_VS_UNTAG_OFFSET 2 -#define RTL8367C_VS_UNTAG_MASK 0xC -#define RTL8367C_VS_SPRISEL_OFFSET 0 -#define RTL8367C_VS_SPRISEL_MASK 0x3 - -#define RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL0 0x0e81 -#define RTL8367C_VS_PORT1_SVIDX_OFFSET 8 -#define RTL8367C_VS_PORT1_SVIDX_MASK 0x3F00 -#define RTL8367C_VS_PORT0_SVIDX_OFFSET 0 -#define RTL8367C_VS_PORT0_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL1 0x0e82 -#define RTL8367C_VS_PORT3_SVIDX_OFFSET 8 -#define RTL8367C_VS_PORT3_SVIDX_MASK 0x3F00 -#define RTL8367C_VS_PORT2_SVIDX_OFFSET 0 -#define RTL8367C_VS_PORT2_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL2 0x0e83 -#define RTL8367C_VS_PORT5_SVIDX_OFFSET 8 -#define RTL8367C_VS_PORT5_SVIDX_MASK 0x3F00 -#define RTL8367C_VS_PORT4_SVIDX_OFFSET 0 -#define RTL8367C_VS_PORT4_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL3 0x0e84 -#define RTL8367C_VS_PORT7_SVIDX_OFFSET 8 -#define RTL8367C_VS_PORT7_SVIDX_MASK 0x3F00 -#define RTL8367C_VS_PORT6_SVIDX_OFFSET 0 -#define RTL8367C_VS_PORT6_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_UNTAG_UNMAT_CFG 0x0e85 -#define RTL8367C_VS_UNTAG_SVIDX_OFFSET 8 -#define RTL8367C_VS_UNTAG_SVIDX_MASK 0x3F00 -#define RTL8367C_VS_UNMAT_SVIDX_OFFSET 0 -#define RTL8367C_VS_UNMAT_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_LOOKUP_TYPE 0x0e86 -#define RTL8367C_SVLAN_LOOKUP_TYPE_OFFSET 0 -#define RTL8367C_SVLAN_LOOKUP_TYPE_MASK 0x1 - -#define RTL8367C_REG_IPMC_GROUP_VALID_15_0 0x0e87 - -#define RTL8367C_REG_IPMC_GROUP_VALID_31_16 0x0e88 - -#define RTL8367C_REG_IPMC_GROUP_VALID_47_32 0x0e89 - -#define RTL8367C_REG_IPMC_GROUP_VALID_63_48 0x0e8a - -#define RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL4 0x0e8b -#define RTL8367C_VS_PORT9_SVIDX_OFFSET 8 -#define RTL8367C_VS_PORT9_SVIDX_MASK 0x3F00 -#define RTL8367C_VS_PORT8_SVIDX_OFFSET 0 -#define RTL8367C_VS_PORT8_SVIDX_MASK 0x3F - -#define RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL5 0x0e8c -#define RTL8367C_SVLAN_PORTBASED_SVIDX_CTRL5_OFFSET 0 -#define RTL8367C_SVLAN_PORTBASED_SVIDX_CTRL5_MASK 0x3F - -#define RTL8367C_REG_SVLAN_CFG_EXT 0x0e8d -#define RTL8367C_VS_PORT10_DMACVIDSEL_OFFSET 2 -#define RTL8367C_VS_PORT10_DMACVIDSEL_MASK 0x4 -#define RTL8367C_VS_PORT9_DMACVIDSEL_OFFSET 1 -#define RTL8367C_VS_PORT9_DMACVIDSEL_MASK 0x2 -#define RTL8367C_VS_PORT8_DMACVIDSEL_OFFSET 0 -#define RTL8367C_VS_PORT8_DMACVIDSEL_MASK 0x1 - -#define RTL8367C_REG_SVLAN_MEMBERCFG63_CTRL4 0x0e8e -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL4_VS_UNTAGSET_EXT_OFFSET 8 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL4_VS_UNTAGSET_EXT_MASK 0x700 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL4_VS_SMBR_EXT_OFFSET 0 -#define RTL8367C_SVLAN_MEMBERCFG63_CTRL4_VS_SMBR_EXT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_DUMMY_0 0x0e90 - -#define RTL8367C_REG_SVLAN_DUMMY_1 0x0e91 - -#define RTL8367C_REG_SVLAN_DUMMY_2 0x0e92 - -#define RTL8367C_REG_SVLAN_DUMMY_3 0x0e93 - -#define RTL8367C_REG_SVLAN_DUMMY_4 0x0e94 - -#define RTL8367C_REG_SVLAN_DUMMY_5 0x0e95 - -#define RTL8367C_REG_SVLAN_DUMMY_6 0x0e96 - -#define RTL8367C_REG_SVLAN_DUMMY_7 0x0e97 - -#define RTL8367C_REG_SVLAN_DUMMY_8 0x0e98 - -#define RTL8367C_REG_SVLAN_DUMMY_9 0x0e99 - -#define RTL8367C_REG_SVLAN_DUMMY_10 0x0e9a - -#define RTL8367C_REG_SVLAN_DUMMY_11 0x0e9b - -#define RTL8367C_REG_SVLAN_DUMMY_12 0x0e9c - -#define RTL8367C_REG_SVLAN_DUMMY_13 0x0e9d - -#define RTL8367C_REG_SVLAN_DUMMY_14 0x0e9e - -#define RTL8367C_REG_SVLAN_DUMMY_15 0x0e9f - -#define RTL8367C_REG_SVLAN_DUMMY_16 0x0ea0 - -#define RTL8367C_REG_SVLAN_DUMMY_17 0x0ea1 - -#define RTL8367C_REG_SVLAN_DUMMY_18 0x0ea2 - -#define RTL8367C_REG_SVLAN_DUMMY_19 0x0ea3 - -#define RTL8367C_REG_SVLAN_DUMMY_20 0x0ea4 - -#define RTL8367C_REG_SVLAN_DUMMY_21 0x0ea5 - -#define RTL8367C_REG_SVLAN_DUMMY_22 0x0ea6 - -#define RTL8367C_REG_SVLAN_DUMMY_23 0x0ea7 - -#define RTL8367C_REG_SVLAN_DUMMY_24 0x0ea8 - -#define RTL8367C_REG_SVLAN_DUMMY_25 0x0ea9 - -#define RTL8367C_REG_SVLAN_DUMMY_26 0x0eaa - -#define RTL8367C_REG_SVLAN_DUMMY_27 0x0eab - -#define RTL8367C_REG_SVLAN_DUMMY_28 0x0eac - -#define RTL8367C_REG_SVLAN_DUMMY_29 0x0ead - -#define RTL8367C_REG_SVLAN_DUMMY_30 0x0eae - -#define RTL8367C_REG_SVLAN_DUMMY_31 0x0eaf - -#define RTL8367C_REG_IPMC_GROUP_VID_00 0x0eb0 -#define RTL8367C_IPMC_GROUP_VID_00_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_00_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_01 0x0eb1 -#define RTL8367C_IPMC_GROUP_VID_01_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_01_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_02 0x0eb2 -#define RTL8367C_IPMC_GROUP_VID_02_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_02_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_03 0x0eb3 -#define RTL8367C_IPMC_GROUP_VID_03_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_03_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_04 0x0eb4 -#define RTL8367C_IPMC_GROUP_VID_04_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_04_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_05 0x0eb5 -#define RTL8367C_IPMC_GROUP_VID_05_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_05_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_06 0x0eb6 -#define RTL8367C_IPMC_GROUP_VID_06_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_06_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_07 0x0eb7 -#define RTL8367C_IPMC_GROUP_VID_07_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_07_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_08 0x0eb8 -#define RTL8367C_IPMC_GROUP_VID_08_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_08_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_09 0x0eb9 -#define RTL8367C_IPMC_GROUP_VID_09_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_09_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_10 0x0eba -#define RTL8367C_IPMC_GROUP_VID_10_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_10_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_11 0x0ebb -#define RTL8367C_IPMC_GROUP_VID_11_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_11_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_12 0x0ebc -#define RTL8367C_IPMC_GROUP_VID_12_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_12_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_13 0x0ebd -#define RTL8367C_IPMC_GROUP_VID_13_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_13_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_14 0x0ebe -#define RTL8367C_IPMC_GROUP_VID_14_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_14_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_15 0x0ebf -#define RTL8367C_IPMC_GROUP_VID_15_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_15_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_16 0x0ec0 -#define RTL8367C_IPMC_GROUP_VID_16_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_16_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_17 0x0ec1 -#define RTL8367C_IPMC_GROUP_VID_17_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_17_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_18 0x0ec2 -#define RTL8367C_IPMC_GROUP_VID_18_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_18_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_19 0x0ec3 -#define RTL8367C_IPMC_GROUP_VID_19_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_19_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_20 0x0ec4 -#define RTL8367C_IPMC_GROUP_VID_20_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_20_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_21 0x0ec5 -#define RTL8367C_IPMC_GROUP_VID_21_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_21_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_22 0x0ec6 -#define RTL8367C_IPMC_GROUP_VID_22_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_22_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_23 0x0ec7 -#define RTL8367C_IPMC_GROUP_VID_23_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_23_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_24 0x0ec8 -#define RTL8367C_IPMC_GROUP_VID_24_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_24_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_25 0x0ec9 -#define RTL8367C_IPMC_GROUP_VID_25_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_25_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_26 0x0eca -#define RTL8367C_IPMC_GROUP_VID_26_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_26_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_27 0x0ecb -#define RTL8367C_IPMC_GROUP_VID_27_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_27_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_28 0x0ecc -#define RTL8367C_IPMC_GROUP_VID_28_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_28_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_29 0x0ecd -#define RTL8367C_IPMC_GROUP_VID_29_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_29_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_30 0x0ece -#define RTL8367C_IPMC_GROUP_VID_30_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_30_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_31 0x0ecf -#define RTL8367C_IPMC_GROUP_VID_31_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_31_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_32 0x0ed0 -#define RTL8367C_IPMC_GROUP_VID_32_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_32_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_33 0x0ed1 -#define RTL8367C_IPMC_GROUP_VID_33_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_33_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_34 0x0ed2 -#define RTL8367C_IPMC_GROUP_VID_34_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_34_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_35 0x0ed3 -#define RTL8367C_IPMC_GROUP_VID_35_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_35_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_36 0x0ed4 -#define RTL8367C_IPMC_GROUP_VID_36_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_36_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_37 0x0ed5 -#define RTL8367C_IPMC_GROUP_VID_37_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_37_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_38 0x0ed6 -#define RTL8367C_IPMC_GROUP_VID_38_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_38_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_39 0x0ed7 -#define RTL8367C_IPMC_GROUP_VID_39_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_39_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_40 0x0ed8 -#define RTL8367C_IPMC_GROUP_VID_40_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_40_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_41 0x0ed9 -#define RTL8367C_IPMC_GROUP_VID_41_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_41_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_42 0x0eda -#define RTL8367C_IPMC_GROUP_VID_42_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_42_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_43 0x0edb -#define RTL8367C_IPMC_GROUP_VID_43_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_43_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_44 0x0edc -#define RTL8367C_IPMC_GROUP_VID_44_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_44_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_45 0x0edd -#define RTL8367C_IPMC_GROUP_VID_45_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_45_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_46 0x0ede -#define RTL8367C_IPMC_GROUP_VID_46_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_46_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_47 0x0edf -#define RTL8367C_IPMC_GROUP_VID_47_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_47_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_48 0x0ef0 -#define RTL8367C_IPMC_GROUP_VID_48_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_48_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_49 0x0ef1 -#define RTL8367C_IPMC_GROUP_VID_49_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_49_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_50 0x0ef2 -#define RTL8367C_IPMC_GROUP_VID_50_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_50_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_51 0x0ef3 -#define RTL8367C_IPMC_GROUP_VID_51_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_51_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_52 0x0ef4 -#define RTL8367C_IPMC_GROUP_VID_52_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_52_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_53 0x0ef5 -#define RTL8367C_IPMC_GROUP_VID_53_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_53_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_54 0x0ef6 -#define RTL8367C_IPMC_GROUP_VID_54_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_54_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_55 0x0ef7 -#define RTL8367C_IPMC_GROUP_VID_55_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_55_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_56 0x0ef8 -#define RTL8367C_IPMC_GROUP_VID_56_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_56_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_57 0x0ef9 -#define RTL8367C_IPMC_GROUP_VID_57_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_57_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_58 0x0efa -#define RTL8367C_IPMC_GROUP_VID_58_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_58_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_59 0x0efb -#define RTL8367C_IPMC_GROUP_VID_59_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_59_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_60 0x0efc -#define RTL8367C_IPMC_GROUP_VID_60_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_60_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_61 0x0efd -#define RTL8367C_IPMC_GROUP_VID_61_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_61_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_62 0x0efe -#define RTL8367C_IPMC_GROUP_VID_62_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_62_MASK 0xFFF - -#define RTL8367C_REG_IPMC_GROUP_VID_63 0x0eff -#define RTL8367C_IPMC_GROUP_VID_63_OFFSET 0 -#define RTL8367C_IPMC_GROUP_VID_63_MASK 0xFFF - -/* (16'h0f00)hsactrl_reg */ - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY0_CTRL0 0x0f00 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY0_CTRL1 0x0f01 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY0_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY1_CTRL0 0x0f02 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY1_CTRL1 0x0f03 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY1_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY2_CTRL0 0x0f04 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY2_CTRL1 0x0f05 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY2_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY3_CTRL0 0x0f06 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY3_CTRL1 0x0f07 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY3_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY4_CTRL0 0x0f08 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY4_CTRL1 0x0f09 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY4_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY5_CTRL0 0x0f0a -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY5_CTRL1 0x0f0b -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY5_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY6_CTRL0 0x0f0c -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY6_CTRL1 0x0f0d -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY6_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY7_CTRL0 0x0f0e -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY7_CTRL1 0x0f0f -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY7_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY8_CTRL0 0x0f10 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY8_CTRL1 0x0f11 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY8_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY9_CTRL0 0x0f12 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY9_CTRL1 0x0f13 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY9_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY10_CTRL0 0x0f14 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY10_CTRL1 0x0f15 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY10_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY11_CTRL0 0x0f16 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY11_CTRL1 0x0f17 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY11_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY12_CTRL0 0x0f18 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY12_CTRL1 0x0f19 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY12_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY13_CTRL0 0x0f1a -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY13_CTRL1 0x0f1b -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY13_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY14_CTRL0 0x0f1c -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY14_CTRL1 0x0f1d -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY14_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY15_CTRL0 0x0f1e -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY15_CTRL1 0x0f1f -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY15_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY16_CTRL0 0x0f20 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY16_CTRL1 0x0f21 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY16_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY17_CTRL0 0x0f22 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY17_CTRL1 0x0f23 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY17_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY18_CTRL0 0x0f24 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY18_CTRL1 0x0f25 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY18_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY19_CTRL0 0x0f26 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY19_CTRL1 0x0f27 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY19_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY20_CTRL0 0x0f28 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY20_CTRL1 0x0f29 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY20_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY21_CTRL0 0x0f2a -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY21_CTRL1 0x0f2b -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY21_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY22_CTRL0 0x0f2c -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY22_CTRL1 0x0f2d -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY22_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY23_CTRL0 0x0f2e -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY23_CTRL1 0x0f2f -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY23_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY24_CTRL0 0x0f30 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY24_CTRL1 0x0f31 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY24_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY25_CTRL0 0x0f32 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY25_CTRL1 0x0f33 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY25_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY26_CTRL0 0x0f34 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY26_CTRL1 0x0f35 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY26_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY27_CTRL0 0x0f36 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY27_CTRL1 0x0f37 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY27_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY28_CTRL0 0x0f38 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY28_CTRL1 0x0f39 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY28_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY29_CTRL0 0x0f3a -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY29_CTRL1 0x0f3b -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY29_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY30_CTRL0 0x0f3c -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY30_CTRL1 0x0f3d -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY30_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY31_CTRL0 0x0f3e -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY31_CTRL1 0x0f3f -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY31_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY32_CTRL0 0x0f40 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY32_CTRL1 0x0f41 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY32_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY33_CTRL0 0x0f42 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY33_CTRL1 0x0f43 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY33_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY34_CTRL0 0x0f44 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY34_CTRL1 0x0f45 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY34_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY35_CTRL0 0x0f46 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY35_CTRL1 0x0f47 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY35_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY36_CTRL0 0x0f48 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY36_CTRL1 0x0f49 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY36_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY37_CTRL0 0x0f4a -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY37_CTRL1 0x0f4b -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY37_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY38_CTRL0 0x0f4c -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY38_CTRL1 0x0f4d -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY38_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY39_CTRL0 0x0f4e -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY39_CTRL1 0x0f4f -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY39_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY40_CTRL0 0x0f50 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY40_CTRL1 0x0f51 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY40_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY41_CTRL0 0x0f52 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY41_CTRL1 0x0f53 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY41_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY42_CTRL0 0x0f54 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY42_CTRL1 0x0f55 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY42_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY43_CTRL0 0x0f56 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY43_CTRL1 0x0f57 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY43_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY44_CTRL0 0x0f58 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY44_CTRL1 0x0f59 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY44_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY45_CTRL0 0x0f5a -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY45_CTRL1 0x0f5b -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY45_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY46_CTRL0 0x0f5c -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY46_CTRL1 0x0f5d -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY46_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY47_CTRL0 0x0f5e -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY47_CTRL1 0x0f5f -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY47_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY48_CTRL0 0x0f60 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY48_CTRL1 0x0f61 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY48_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY49_CTRL0 0x0f62 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY49_CTRL1 0x0f63 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY49_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY50_CTRL0 0x0f64 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY50_CTRL1 0x0f65 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY50_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY51_CTRL0 0x0f66 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY51_CTRL1 0x0f67 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY51_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY52_CTRL0 0x0f68 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY52_CTRL1 0x0f69 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY52_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY53_CTRL0 0x0f6a -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY53_CTRL1 0x0f6b -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY53_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY54_CTRL0 0x0f6c -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY54_CTRL1 0x0f6d -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY54_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY55_CTRL0 0x0f6e -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY55_CTRL1 0x0f6f -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY55_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY56_CTRL0 0x0f70 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY56_CTRL1 0x0f71 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY56_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY57_CTRL0 0x0f72 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY57_CTRL1 0x0f73 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY57_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY58_CTRL0 0x0f74 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY58_CTRL1 0x0f75 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY58_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY59_CTRL0 0x0f76 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY59_CTRL1 0x0f77 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY59_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY60_CTRL0 0x0f78 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY60_CTRL1 0x0f79 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY60_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY61_CTRL0 0x0f7a -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY61_CTRL1 0x0f7b -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY61_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY62_CTRL0 0x0f7c -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY62_CTRL1 0x0f7d -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY62_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY63_CTRL0 0x0f7e -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY63_CTRL1 0x0f7f -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY63_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY64_CTRL0 0x0f80 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY64_CTRL1 0x0f81 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY64_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY65_CTRL0 0x0f82 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY65_CTRL1 0x0f83 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY65_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY66_CTRL0 0x0f84 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY66_CTRL1 0x0f85 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY66_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY67_CTRL0 0x0f86 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY67_CTRL1 0x0f87 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY67_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY68_CTRL0 0x0f88 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY68_CTRL1 0x0f89 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY68_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY69_CTRL0 0x0f8a -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY69_CTRL1 0x0f8b -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY69_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY70_CTRL0 0x0f8c -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY70_CTRL1 0x0f8d -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY70_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY71_CTRL0 0x0f8e -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY71_CTRL1 0x0f8f -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY71_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY72_CTRL0 0x0f90 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY72_CTRL1 0x0f91 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY72_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY73_CTRL0 0x0f92 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY73_CTRL1 0x0f93 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY73_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY74_CTRL0 0x0f94 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY74_CTRL1 0x0f95 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY74_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY75_CTRL0 0x0f96 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY75_CTRL1 0x0f97 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY75_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY76_CTRL0 0x0f98 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY76_CTRL1 0x0f99 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY76_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY77_CTRL0 0x0f9a -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY77_CTRL1 0x0f9b -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY77_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY78_CTRL0 0x0f9c -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY78_CTRL1 0x0f9d -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY78_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY79_CTRL0 0x0f9e -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY79_CTRL1 0x0f9f -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY79_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY80_CTRL0 0x0fa0 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY80_CTRL1 0x0fa1 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY80_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY81_CTRL0 0x0fa2 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY81_CTRL1 0x0fa3 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY81_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY82_CTRL0 0x0fa4 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY82_CTRL1 0x0fa5 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY82_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY83_CTRL0 0x0fa6 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY83_CTRL1 0x0fa7 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY83_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY84_CTRL0 0x0fa8 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY84_CTRL1 0x0fa9 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY84_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY85_CTRL0 0x0faa -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY85_CTRL1 0x0fab -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY85_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY86_CTRL0 0x0fac -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY86_CTRL1 0x0fad -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY86_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY87_CTRL0 0x0fae -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY87_CTRL1 0x0faf -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY87_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY88_CTRL0 0x0fb0 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY88_CTRL1 0x0fb1 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY88_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY89_CTRL0 0x0fb2 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY89_CTRL1 0x0fb3 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY89_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY90_CTRL0 0x0fb4 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY90_CTRL1 0x0fb5 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY90_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY91_CTRL0 0x0fb6 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY91_CTRL1 0x0fb7 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY91_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY92_CTRL0 0x0fb8 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY92_CTRL1 0x0fb9 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY92_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY93_CTRL0 0x0fba -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY93_CTRL1 0x0fbb -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY93_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY94_CTRL0 0x0fbc -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY94_CTRL1 0x0fbd -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY94_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY95_CTRL0 0x0fbe -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY95_CTRL1 0x0fbf -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY95_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY96_CTRL0 0x0fc0 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY96_CTRL1 0x0fc1 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY96_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY97_CTRL0 0x0fc2 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY97_CTRL1 0x0fc3 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY97_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY98_CTRL0 0x0fc4 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY98_CTRL1 0x0fc5 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY98_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY99_CTRL0 0x0fc6 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY99_CTRL1 0x0fc7 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY99_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY100_CTRL0 0x0fc8 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY100_CTRL1 0x0fc9 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY100_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY101_CTRL0 0x0fca -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY101_CTRL1 0x0fcb -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY101_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY102_CTRL0 0x0fcc -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY102_CTRL1 0x0fcd -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY102_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY103_CTRL0 0x0fce -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY103_CTRL1 0x0fcf -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY103_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY104_CTRL0 0x0fd0 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY104_CTRL1 0x0fd1 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY104_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY105_CTRL0 0x0fd2 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY105_CTRL1 0x0fd3 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY105_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY106_CTRL0 0x0fd4 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY106_CTRL1 0x0fd5 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY106_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY107_CTRL0 0x0fd6 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY107_CTRL1 0x0fd7 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY107_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY108_CTRL0 0x0fd8 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY108_CTRL1 0x0fd9 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY108_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY109_CTRL0 0x0fda -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY109_CTRL1 0x0fdb -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY109_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY110_CTRL0 0x0fdc -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY110_CTRL1 0x0fdd -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY110_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY111_CTRL0 0x0fde -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY111_CTRL1 0x0fdf -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY111_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY112_CTRL0 0x0fe0 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY112_CTRL1 0x0fe1 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY112_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY113_CTRL0 0x0fe2 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY113_CTRL1 0x0fe3 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY113_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY114_CTRL0 0x0fe4 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY114_CTRL1 0x0fe5 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY114_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY115_CTRL0 0x0fe6 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY115_CTRL1 0x0fe7 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY115_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY116_CTRL0 0x0fe8 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY116_CTRL1 0x0fe9 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY116_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY117_CTRL0 0x0fea -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY117_CTRL1 0x0feb -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY117_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY118_CTRL0 0x0fec -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY118_CTRL1 0x0fed -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY118_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY119_CTRL0 0x0fee -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY119_CTRL1 0x0fef -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY119_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY120_CTRL0 0x0ff0 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY120_CTRL1 0x0ff1 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY120_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY121_CTRL0 0x0ff2 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY121_CTRL1 0x0ff3 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY121_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY122_CTRL0 0x0ff4 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY122_CTRL1 0x0ff5 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY122_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY123_CTRL0 0x0ff6 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY123_CTRL1 0x0ff7 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY123_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY124_CTRL0 0x0ff8 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY124_CTRL1 0x0ff9 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY124_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY125_CTRL0 0x0ffa -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY125_CTRL1 0x0ffb -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY125_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY126_CTRL0 0x0ffc -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY126_CTRL1 0x0ffd -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY126_CTRL1_VID_MASK 0xFFF - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY127_CTRL0 0x0ffe -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL0_DST_PORT1_OFFSET 9 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL0_DST_PORT1_MASK 0x200 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL0_SVIDX_OFFSET 3 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL0_SVIDX_MASK 0x1F8 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL0_DST_PORT_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL0_DST_PORT_MASK 0x7 - -#define RTL8367C_REG_SVLAN_SP2C_ENTRY127_CTRL1 0x0fff -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL1_VALID_OFFSET 12 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL1_VALID_MASK 0x1000 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL1_VID_OFFSET 0 -#define RTL8367C_SVLAN_SP2C_ENTRY127_CTRL1_VID_MASK 0xFFF - -/* (16'h1000)mib_reg */ - -#define RTL8367C_REG_MIB_COUNTER0 0x1000 - -#define RTL8367C_REG_MIB_COUNTER1 0x1001 - -#define RTL8367C_REG_MIB_COUNTER2 0x1002 - -#define RTL8367C_REG_MIB_COUNTER3 0x1003 - -#define RTL8367C_REG_MIB_ADDRESS 0x1004 -#define RTL8367C_MIB_ADDRESS_OFFSET 0 -#define RTL8367C_MIB_ADDRESS_MASK 0x1FF - -#define RTL8367C_REG_MIB_CTRL0 0x1005 -#define RTL8367C_PORT10_RESET_OFFSET 15 -#define RTL8367C_PORT10_RESET_MASK 0x8000 -#define RTL8367C_PORT9_RESET_OFFSET 14 -#define RTL8367C_PORT9_RESET_MASK 0x4000 -#define RTL8367C_PORT8_RESET_OFFSET 13 -#define RTL8367C_PORT8_RESET_MASK 0x2000 -#define RTL8367C_RESET_VALUE_OFFSET 12 -#define RTL8367C_RESET_VALUE_MASK 0x1000 -#define RTL8367C_GLOBAL_RESET_OFFSET 11 -#define RTL8367C_GLOBAL_RESET_MASK 0x800 -#define RTL8367C_QM_RESET_OFFSET 10 -#define RTL8367C_QM_RESET_MASK 0x400 -#define RTL8367C_PORT7_RESET_OFFSET 9 -#define RTL8367C_PORT7_RESET_MASK 0x200 -#define RTL8367C_PORT6_RESET_OFFSET 8 -#define RTL8367C_PORT6_RESET_MASK 0x100 -#define RTL8367C_PORT5_RESET_OFFSET 7 -#define RTL8367C_PORT5_RESET_MASK 0x80 -#define RTL8367C_PORT4_RESET_OFFSET 6 -#define RTL8367C_PORT4_RESET_MASK 0x40 -#define RTL8367C_PORT3_RESET_OFFSET 5 -#define RTL8367C_PORT3_RESET_MASK 0x20 -#define RTL8367C_PORT2_RESET_OFFSET 4 -#define RTL8367C_PORT2_RESET_MASK 0x10 -#define RTL8367C_PORT1_RESET_OFFSET 3 -#define RTL8367C_PORT1_RESET_MASK 0x8 -#define RTL8367C_PORT0_RESET_OFFSET 2 -#define RTL8367C_PORT0_RESET_MASK 0x4 -#define RTL8367C_RESET_FLAG_OFFSET 1 -#define RTL8367C_RESET_FLAG_MASK 0x2 -#define RTL8367C_MIB_CTRL0_BUSY_FLAG_OFFSET 0 -#define RTL8367C_MIB_CTRL0_BUSY_FLAG_MASK 0x1 - -#define RTL8367C_REG_MIB_CTRL1 0x1007 -#define RTL8367C_COUNTER15_RESET_OFFSET 15 -#define RTL8367C_COUNTER15_RESET_MASK 0x8000 -#define RTL8367C_COUNTER14_RESET_OFFSET 14 -#define RTL8367C_COUNTER14_RESET_MASK 0x4000 -#define RTL8367C_COUNTER13_RESET_OFFSET 13 -#define RTL8367C_COUNTER13_RESET_MASK 0x2000 -#define RTL8367C_COUNTER12_RESET_OFFSET 12 -#define RTL8367C_COUNTER12_RESET_MASK 0x1000 -#define RTL8367C_COUNTER11_RESET_OFFSET 11 -#define RTL8367C_COUNTER11_RESET_MASK 0x800 -#define RTL8367C_COUNTER10_RESET_OFFSET 10 -#define RTL8367C_COUNTER10_RESET_MASK 0x400 -#define RTL8367C_COUNTER9_RESET_OFFSET 9 -#define RTL8367C_COUNTER9_RESET_MASK 0x200 -#define RTL8367C_COUNTER8_RESET_OFFSET 8 -#define RTL8367C_COUNTER8_RESET_MASK 0x100 -#define RTL8367C_COUNTER7_RESET_OFFSET 7 -#define RTL8367C_COUNTER7_RESET_MASK 0x80 -#define RTL8367C_COUNTER6_RESET_OFFSET 6 -#define RTL8367C_COUNTER6_RESET_MASK 0x40 -#define RTL8367C_COUNTER5_RESET_OFFSET 5 -#define RTL8367C_COUNTER5_RESET_MASK 0x20 -#define RTL8367C_COUNTER4_RESET_OFFSET 4 -#define RTL8367C_COUNTER4_RESET_MASK 0x10 -#define RTL8367C_COUNTER3_RESET_OFFSET 3 -#define RTL8367C_COUNTER3_RESET_MASK 0x8 -#define RTL8367C_COUNTER2_RESET_OFFSET 2 -#define RTL8367C_COUNTER2_RESET_MASK 0x4 -#define RTL8367C_COUNTER1_RESET_OFFSET 1 -#define RTL8367C_COUNTER1_RESET_MASK 0x2 -#define RTL8367C_COUNTER0_RESET_OFFSET 0 -#define RTL8367C_COUNTER0_RESET_MASK 0x1 - -#define RTL8367C_REG_MIB_CTRL2 0x1008 -#define RTL8367C_COUNTER31_RESET_OFFSET 15 -#define RTL8367C_COUNTER31_RESET_MASK 0x8000 -#define RTL8367C_COUNTER30_RESET_OFFSET 14 -#define RTL8367C_COUNTER30_RESET_MASK 0x4000 -#define RTL8367C_COUNTER29_RESET_OFFSET 13 -#define RTL8367C_COUNTER29_RESET_MASK 0x2000 -#define RTL8367C_COUNTER28_RESET_OFFSET 12 -#define RTL8367C_COUNTER28_RESET_MASK 0x1000 -#define RTL8367C_COUNTER27_RESET_OFFSET 11 -#define RTL8367C_COUNTER27_RESET_MASK 0x800 -#define RTL8367C_COUNTER26_RESET_OFFSET 10 -#define RTL8367C_COUNTER26_RESET_MASK 0x400 -#define RTL8367C_COUNTER25_RESET_OFFSET 9 -#define RTL8367C_COUNTER25_RESET_MASK 0x200 -#define RTL8367C_COUNTER24_RESET_OFFSET 8 -#define RTL8367C_COUNTER24_RESET_MASK 0x100 -#define RTL8367C_COUNTER23_RESET_OFFSET 7 -#define RTL8367C_COUNTER23_RESET_MASK 0x80 -#define RTL8367C_COUNTER22_RESET_OFFSET 6 -#define RTL8367C_COUNTER22_RESET_MASK 0x40 -#define RTL8367C_COUNTER21_RESET_OFFSET 5 -#define RTL8367C_COUNTER21_RESET_MASK 0x20 -#define RTL8367C_COUNTER20_RESET_OFFSET 4 -#define RTL8367C_COUNTER20_RESET_MASK 0x10 -#define RTL8367C_COUNTER19_RESET_OFFSET 3 -#define RTL8367C_COUNTER19_RESET_MASK 0x8 -#define RTL8367C_COUNTER18_RESET_OFFSET 2 -#define RTL8367C_COUNTER18_RESET_MASK 0x4 -#define RTL8367C_COUNTER17_RESET_OFFSET 1 -#define RTL8367C_COUNTER17_RESET_MASK 0x2 -#define RTL8367C_COUNTER16_RESET_OFFSET 0 -#define RTL8367C_COUNTER16_RESET_MASK 0x1 - -#define RTL8367C_REG_MIB_CTRL3 0x1009 -#define RTL8367C_COUNTER15_MODE_OFFSET 15 -#define RTL8367C_COUNTER15_MODE_MASK 0x8000 -#define RTL8367C_COUNTER14_MODE_OFFSET 14 -#define RTL8367C_COUNTER14_MODE_MASK 0x4000 -#define RTL8367C_COUNTER13_MODE_OFFSET 13 -#define RTL8367C_COUNTER13_MODE_MASK 0x2000 -#define RTL8367C_COUNTER12_MODE_OFFSET 12 -#define RTL8367C_COUNTER12_MODE_MASK 0x1000 -#define RTL8367C_COUNTER11_MODE_OFFSET 11 -#define RTL8367C_COUNTER11_MODE_MASK 0x800 -#define RTL8367C_COUNTER10_MODE_OFFSET 10 -#define RTL8367C_COUNTER10_MODE_MASK 0x400 -#define RTL8367C_COUNTER9_MODE_OFFSET 9 -#define RTL8367C_COUNTER9_MODE_MASK 0x200 -#define RTL8367C_COUNTER8_MODE_OFFSET 8 -#define RTL8367C_COUNTER8_MODE_MASK 0x100 -#define RTL8367C_COUNTER7_MODE_OFFSET 7 -#define RTL8367C_COUNTER7_MODE_MASK 0x80 -#define RTL8367C_COUNTER6_MODE_OFFSET 6 -#define RTL8367C_COUNTER6_MODE_MASK 0x40 -#define RTL8367C_COUNTER5_MODE_OFFSET 5 -#define RTL8367C_COUNTER5_MODE_MASK 0x20 -#define RTL8367C_COUNTER4_MODE_OFFSET 4 -#define RTL8367C_COUNTER4_MODE_MASK 0x10 -#define RTL8367C_COUNTER3_MODE_OFFSET 3 -#define RTL8367C_COUNTER3_MODE_MASK 0x8 -#define RTL8367C_COUNTER2_MODE_OFFSET 2 -#define RTL8367C_COUNTER2_MODE_MASK 0x4 -#define RTL8367C_COUNTER1_MODE_OFFSET 1 -#define RTL8367C_COUNTER1_MODE_MASK 0x2 -#define RTL8367C_COUNTER0_MODE_OFFSET 0 -#define RTL8367C_COUNTER0_MODE_MASK 0x1 - -#define RTL8367C_REG_MIB_CTRL4 0x100a -#define RTL8367C_MIB_USAGE_MODE_OFFSET 8 -#define RTL8367C_MIB_USAGE_MODE_MASK 0x100 -#define RTL8367C_MIB_TIMER_OFFSET 0 -#define RTL8367C_MIB_TIMER_MASK 0xFF - -#define RTL8367C_REG_MIB_CTRL5 0x100b -#define RTL8367C_MIB_CTRL5_COUNTER15_TYPE_OFFSET 15 -#define RTL8367C_MIB_CTRL5_COUNTER15_TYPE_MASK 0x8000 -#define RTL8367C_MIB_CTRL5_COUNTER14_TYPE_OFFSET 14 -#define RTL8367C_MIB_CTRL5_COUNTER14_TYPE_MASK 0x4000 -#define RTL8367C_MIB_CTRL5_COUNTER13_TYPE_OFFSET 13 -#define RTL8367C_MIB_CTRL5_COUNTER13_TYPE_MASK 0x2000 -#define RTL8367C_MIB_CTRL5_COUNTER12_TYPE_OFFSET 12 -#define RTL8367C_MIB_CTRL5_COUNTER12_TYPE_MASK 0x1000 -#define RTL8367C_MIB_CTRL5_COUNTER11_TYPE_OFFSET 11 -#define RTL8367C_MIB_CTRL5_COUNTER11_TYPE_MASK 0x800 -#define RTL8367C_MIB_CTRL5_COUNTER10_TYPE_OFFSET 10 -#define RTL8367C_MIB_CTRL5_COUNTER10_TYPE_MASK 0x400 -#define RTL8367C_MIB_CTRL5_COUNTER9_TYPE_OFFSET 9 -#define RTL8367C_MIB_CTRL5_COUNTER9_TYPE_MASK 0x200 -#define RTL8367C_MIB_CTRL5_COUNTER8_TYPE_OFFSET 8 -#define RTL8367C_MIB_CTRL5_COUNTER8_TYPE_MASK 0x100 -#define RTL8367C_MIB_CTRL5_COUNTER7_TYPE_OFFSET 7 -#define RTL8367C_MIB_CTRL5_COUNTER7_TYPE_MASK 0x80 -#define RTL8367C_MIB_CTRL5_COUNTER6_TYPE_OFFSET 6 -#define RTL8367C_MIB_CTRL5_COUNTER6_TYPE_MASK 0x40 -#define RTL8367C_MIB_CTRL5_COUNTER5_TYPE_OFFSET 5 -#define RTL8367C_MIB_CTRL5_COUNTER5_TYPE_MASK 0x20 -#define RTL8367C_MIB_CTRL5_COUNTER4_TYPE_OFFSET 4 -#define RTL8367C_MIB_CTRL5_COUNTER4_TYPE_MASK 0x10 -#define RTL8367C_MIB_CTRL5_COUNTER3_TYPE_OFFSET 3 -#define RTL8367C_MIB_CTRL5_COUNTER3_TYPE_MASK 0x8 -#define RTL8367C_MIB_CTRL5_COUNTER2_TYPE_OFFSET 2 -#define RTL8367C_MIB_CTRL5_COUNTER2_TYPE_MASK 0x4 -#define RTL8367C_MIB_CTRL5_COUNTER1_TYPE_OFFSET 1 -#define RTL8367C_MIB_CTRL5_COUNTER1_TYPE_MASK 0x2 -#define RTL8367C_MIB_CTRL5_COUNTER0_TYPE_OFFSET 0 -#define RTL8367C_MIB_CTRL5_COUNTER0_TYPE_MASK 0x1 - -/* (16'h1100)intrpt_reg */ - -#define RTL8367C_REG_INTR_CTRL 0x1100 -#define RTL8367C_INTR_CTRL_OFFSET 0 -#define RTL8367C_INTR_CTRL_MASK 0x1 - -#define RTL8367C_REG_INTR_IMR 0x1101 -#define RTL8367C_INTR_IMR_SLIENT_START_2_OFFSET 12 -#define RTL8367C_INTR_IMR_SLIENT_START_2_MASK 0x1000 -#define RTL8367C_INTR_IMR_SLIENT_START_OFFSET 11 -#define RTL8367C_INTR_IMR_SLIENT_START_MASK 0x800 -#define RTL8367C_INTR_IMR_ACL_ACTION_OFFSET 9 -#define RTL8367C_INTR_IMR_ACL_ACTION_MASK 0x200 -#define RTL8367C_INTR_IMR_CABLE_DIAG_FIN_OFFSET 8 -#define RTL8367C_INTR_IMR_CABLE_DIAG_FIN_MASK 0x100 -#define RTL8367C_INTR_IMR_INTERRUPT_8051_OFFSET 7 -#define RTL8367C_INTR_IMR_INTERRUPT_8051_MASK 0x80 -#define RTL8367C_INTR_IMR_LOOP_DETECTION_OFFSET 6 -#define RTL8367C_INTR_IMR_LOOP_DETECTION_MASK 0x40 -#define RTL8367C_INTR_IMR_GREEN_TIMER_OFFSET 5 -#define RTL8367C_INTR_IMR_GREEN_TIMER_MASK 0x20 -#define RTL8367C_INTR_IMR_SPECIAL_CONGEST_OFFSET 4 -#define RTL8367C_INTR_IMR_SPECIAL_CONGEST_MASK 0x10 -#define RTL8367C_INTR_IMR_SPEED_CHANGE_OFFSET 3 -#define RTL8367C_INTR_IMR_SPEED_CHANGE_MASK 0x8 -#define RTL8367C_INTR_IMR_LEARN_OVER_OFFSET 2 -#define RTL8367C_INTR_IMR_LEARN_OVER_MASK 0x4 -#define RTL8367C_INTR_IMR_METER_EXCEEDED_OFFSET 1 -#define RTL8367C_INTR_IMR_METER_EXCEEDED_MASK 0x2 -#define RTL8367C_INTR_IMR_LINK_CHANGE_OFFSET 0 -#define RTL8367C_INTR_IMR_LINK_CHANGE_MASK 0x1 - -#define RTL8367C_REG_INTR_IMS 0x1102 -#define RTL8367C_INTR_IMS_SLIENT_START_2_OFFSET 12 -#define RTL8367C_INTR_IMS_SLIENT_START_2_MASK 0x1000 -#define RTL8367C_INTR_IMS_SLIENT_START_OFFSET 11 -#define RTL8367C_INTR_IMS_SLIENT_START_MASK 0x800 -#define RTL8367C_INTR_IMS_ACL_ACTION_OFFSET 9 -#define RTL8367C_INTR_IMS_ACL_ACTION_MASK 0x200 -#define RTL8367C_INTR_IMS_CABLE_DIAG_FIN_OFFSET 8 -#define RTL8367C_INTR_IMS_CABLE_DIAG_FIN_MASK 0x100 -#define RTL8367C_INTR_IMS_INTERRUPT_8051_OFFSET 7 -#define RTL8367C_INTR_IMS_INTERRUPT_8051_MASK 0x80 -#define RTL8367C_INTR_IMS_LOOP_DETECTION_OFFSET 6 -#define RTL8367C_INTR_IMS_LOOP_DETECTION_MASK 0x40 -#define RTL8367C_INTR_IMS_GREEN_TIMER_OFFSET 5 -#define RTL8367C_INTR_IMS_GREEN_TIMER_MASK 0x20 -#define RTL8367C_INTR_IMS_SPECIAL_CONGEST_OFFSET 4 -#define RTL8367C_INTR_IMS_SPECIAL_CONGEST_MASK 0x10 -#define RTL8367C_INTR_IMS_SPEED_CHANGE_OFFSET 3 -#define RTL8367C_INTR_IMS_SPEED_CHANGE_MASK 0x8 -#define RTL8367C_INTR_IMS_LEARN_OVER_OFFSET 2 -#define RTL8367C_INTR_IMS_LEARN_OVER_MASK 0x4 -#define RTL8367C_INTR_IMS_METER_EXCEEDED_OFFSET 1 -#define RTL8367C_INTR_IMS_METER_EXCEEDED_MASK 0x2 -#define RTL8367C_INTR_IMS_LINK_CHANGE_OFFSET 0 -#define RTL8367C_INTR_IMS_LINK_CHANGE_MASK 0x1 - -#define RTL8367C_REG_LEARN_OVER_INDICATOR 0x1103 -#define RTL8367C_LEARN_OVER_INDICATOR_OFFSET 0 -#define RTL8367C_LEARN_OVER_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_SPEED_CHANGE_INDICATOR 0x1104 -#define RTL8367C_SPEED_CHANGE_INDICATOR_OFFSET 0 -#define RTL8367C_SPEED_CHANGE_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_SPECIAL_CONGEST_INDICATOR 0x1105 -#define RTL8367C_SPECIAL_CONGEST_INDICATOR_OFFSET 0 -#define RTL8367C_SPECIAL_CONGEST_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_PORT_LINKDOWN_INDICATOR 0x1106 -#define RTL8367C_PORT_LINKDOWN_INDICATOR_OFFSET 0 -#define RTL8367C_PORT_LINKDOWN_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_PORT_LINKUP_INDICATOR 0x1107 -#define RTL8367C_PORT_LINKUP_INDICATOR_OFFSET 0 -#define RTL8367C_PORT_LINKUP_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_SYSTEM_LEARN_OVER_INDICATOR 0x1108 -#define RTL8367C_SYSTEM_LEARN_OVER_INDICATOR_OFFSET 0 -#define RTL8367C_SYSTEM_LEARN_OVER_INDICATOR_MASK 0x1 - -#define RTL8367C_REG_INTR_IMR_8051 0x1118 -#define RTL8367C_INTR_IMR_8051_SLIENT_START_2_OFFSET 13 -#define RTL8367C_INTR_IMR_8051_SLIENT_START_2_MASK 0x2000 -#define RTL8367C_INTR_IMR_8051_SLIENT_START_OFFSET 12 -#define RTL8367C_INTR_IMR_8051_SLIENT_START_MASK 0x1000 -#define RTL8367C_INTR_IMR_8051_ACL_ACTION_OFFSET 10 -#define RTL8367C_INTR_IMR_8051_ACL_ACTION_MASK 0x400 -#define RTL8367C_INTR_IMR_8051_SAMOVING_8051_OFFSET 9 -#define RTL8367C_INTR_IMR_8051_SAMOVING_8051_MASK 0x200 -#define RTL8367C_INTR_IMR_8051_CABLE_DIAG_FIN_8051_OFFSET 8 -#define RTL8367C_INTR_IMR_8051_CABLE_DIAG_FIN_8051_MASK 0x100 -#define RTL8367C_INTR_IMR_8051_EEELLDP_8051_OFFSET 7 -#define RTL8367C_INTR_IMR_8051_EEELLDP_8051_MASK 0x80 -#define RTL8367C_INTR_IMR_8051_LOOP_DETECTION_8051_OFFSET 6 -#define RTL8367C_INTR_IMR_8051_LOOP_DETECTION_8051_MASK 0x40 -#define RTL8367C_INTR_IMR_8051_GREEN_TIMER_8051_OFFSET 5 -#define RTL8367C_INTR_IMR_8051_GREEN_TIMER_8051_MASK 0x20 -#define RTL8367C_INTR_IMR_8051_SPECIAL_CONGEST_8051_OFFSET 4 -#define RTL8367C_INTR_IMR_8051_SPECIAL_CONGEST_8051_MASK 0x10 -#define RTL8367C_INTR_IMR_8051_SPEED_CHANGE_8051_OFFSET 3 -#define RTL8367C_INTR_IMR_8051_SPEED_CHANGE_8051_MASK 0x8 -#define RTL8367C_INTR_IMR_8051_LEARN_OVER_8051_OFFSET 2 -#define RTL8367C_INTR_IMR_8051_LEARN_OVER_8051_MASK 0x4 -#define RTL8367C_INTR_IMR_8051_METER_EXCEEDED_8051_OFFSET 1 -#define RTL8367C_INTR_IMR_8051_METER_EXCEEDED_8051_MASK 0x2 -#define RTL8367C_INTR_IMR_8051_LINK_CHANGE_8051_OFFSET 0 -#define RTL8367C_INTR_IMR_8051_LINK_CHANGE_8051_MASK 0x1 - -#define RTL8367C_REG_INTR_IMS_8051 0x1119 -#define RTL8367C_INTR_IMS_8051_SLIENT_START_2_OFFSET 13 -#define RTL8367C_INTR_IMS_8051_SLIENT_START_2_MASK 0x2000 -#define RTL8367C_INTR_IMS_8051_SLIENT_START_OFFSET 12 -#define RTL8367C_INTR_IMS_8051_SLIENT_START_MASK 0x1000 -#define RTL8367C_INTR_IMS_8051_ACL_ACTION_OFFSET 10 -#define RTL8367C_INTR_IMS_8051_ACL_ACTION_MASK 0x400 -#define RTL8367C_INTR_IMS_8051_SAMOVING_8051_OFFSET 9 -#define RTL8367C_INTR_IMS_8051_SAMOVING_8051_MASK 0x200 -#define RTL8367C_INTR_IMS_8051_CABLE_DIAG_FIN_8051_OFFSET 8 -#define RTL8367C_INTR_IMS_8051_CABLE_DIAG_FIN_8051_MASK 0x100 -#define RTL8367C_INTR_IMS_8051_EEELLDP_8051_OFFSET 7 -#define RTL8367C_INTR_IMS_8051_EEELLDP_8051_MASK 0x80 -#define RTL8367C_INTR_IMS_8051_LOOP_DETECTION_8051_OFFSET 6 -#define RTL8367C_INTR_IMS_8051_LOOP_DETECTION_8051_MASK 0x40 -#define RTL8367C_INTR_IMS_8051_GREEN_TIMER_8051_OFFSET 5 -#define RTL8367C_INTR_IMS_8051_GREEN_TIMER_8051_MASK 0x20 -#define RTL8367C_INTR_IMS_8051_SPECIAL_CONGEST_8051_OFFSET 4 -#define RTL8367C_INTR_IMS_8051_SPECIAL_CONGEST_8051_MASK 0x10 -#define RTL8367C_INTR_IMS_8051_SPEED_CHANGE_8051_OFFSET 3 -#define RTL8367C_INTR_IMS_8051_SPEED_CHANGE_8051_MASK 0x8 -#define RTL8367C_INTR_IMS_8051_LEARN_OVER_8051_OFFSET 2 -#define RTL8367C_INTR_IMS_8051_LEARN_OVER_8051_MASK 0x4 -#define RTL8367C_INTR_IMS_8051_METER_EXCEEDED_8051_OFFSET 1 -#define RTL8367C_INTR_IMS_8051_METER_EXCEEDED_8051_MASK 0x2 -#define RTL8367C_INTR_IMS_8051_LINK_CHANGE_8051_OFFSET 0 -#define RTL8367C_INTR_IMS_8051_LINK_CHANGE_8051_MASK 0x1 - -#define RTL8367C_REG_DW8051_INT_CPU 0x111a -#define RTL8367C_DW8051_INT_CPU_OFFSET 0 -#define RTL8367C_DW8051_INT_CPU_MASK 0x1 - -#define RTL8367C_REG_LEARN_OVER_INDICATOR_8051 0x1120 -#define RTL8367C_LEARN_OVER_INDICATOR_8051_OFFSET 0 -#define RTL8367C_LEARN_OVER_INDICATOR_8051_MASK 0x7FF - -#define RTL8367C_REG_SPEED_CHANGE_INDICATOR_8051 0x1121 -#define RTL8367C_SPEED_CHANGE_INDICATOR_8051_OFFSET 0 -#define RTL8367C_SPEED_CHANGE_INDICATOR_8051_MASK 0x7FF - -#define RTL8367C_REG_SPECIAL_CONGEST_INDICATOR_8051 0x1122 -#define RTL8367C_SPECIAL_CONGEST_INDICATOR_8051_OFFSET 0 -#define RTL8367C_SPECIAL_CONGEST_INDICATOR_8051_MASK 0x7FF - -#define RTL8367C_REG_PORT_LINKDOWN_INDICATOR_8051 0x1123 -#define RTL8367C_PORT_LINKDOWN_INDICATOR_8051_OFFSET 0 -#define RTL8367C_PORT_LINKDOWN_INDICATOR_8051_MASK 0x7FF - -#define RTL8367C_REG_PORT_LINKUP_INDICATOR_8051 0x1124 -#define RTL8367C_PORT_LINKUP_INDICATOR_8051_OFFSET 0 -#define RTL8367C_PORT_LINKUP_INDICATOR_8051_MASK 0x7FF - -#define RTL8367C_REG_DUMMY_1125 0x1125 - -#define RTL8367C_REG_DUMMY_1126 0x1126 - -#define RTL8367C_REG_DUMMY_1127 0x1127 - -#define RTL8367C_REG_DUMMY_1128 0x1128 - -#define RTL8367C_REG_DUMMY_1129 0x1129 - -#define RTL8367C_REG_INTR_IMS_BUFFER_RESET 0x112a -#define RTL8367C_INTR_IMS_BUFFER_RESET_IMR_BUFF_RESET_OFFSET 1 -#define RTL8367C_INTR_IMS_BUFFER_RESET_IMR_BUFF_RESET_MASK 0x2 -#define RTL8367C_INTR_IMS_BUFFER_RESET_BUFFER_RESET_OFFSET 0 -#define RTL8367C_INTR_IMS_BUFFER_RESET_BUFFER_RESET_MASK 0x1 - -#define RTL8367C_REG_INTR_IMS_8051_BUFFER_RESET 0x112b -#define RTL8367C_INTR_IMS_8051_BUFFER_RESET_IMR_BUFF_RESET_OFFSET 1 -#define RTL8367C_INTR_IMS_8051_BUFFER_RESET_IMR_BUFF_RESET_MASK 0x2 -#define RTL8367C_INTR_IMS_8051_BUFFER_RESET_BUFFER_RESET_OFFSET 0 -#define RTL8367C_INTR_IMS_8051_BUFFER_RESET_BUFFER_RESET_MASK 0x1 - -#define RTL8367C_REG_GPHY_INTRPT_8051 0x112c -#define RTL8367C_IMS_GPHY_8051_H_OFFSET 13 -#define RTL8367C_IMS_GPHY_8051_H_MASK 0xE000 -#define RTL8367C_IMR_GPHY_8051_H_OFFSET 10 -#define RTL8367C_IMR_GPHY_8051_H_MASK 0x1C00 -#define RTL8367C_IMS_GPHY_8051_OFFSET 5 -#define RTL8367C_IMS_GPHY_8051_MASK 0x3E0 -#define RTL8367C_IMR_GPHY_8051_OFFSET 0 -#define RTL8367C_IMR_GPHY_8051_MASK 0x1F - -#define RTL8367C_REG_GPHY_INTRPT 0x112d -#define RTL8367C_IMS_GPHY_H_OFFSET 13 -#define RTL8367C_IMS_GPHY_H_MASK 0xE000 -#define RTL8367C_IMR_GPHY_H_OFFSET 10 -#define RTL8367C_IMR_GPHY_H_MASK 0x1C00 -#define RTL8367C_IMS_GPHY_OFFSET 5 -#define RTL8367C_IMS_GPHY_MASK 0x3E0 -#define RTL8367C_IMR_GPHY_OFFSET 0 -#define RTL8367C_IMR_GPHY_MASK 0x1F - -#define RTL8367C_REG_THERMAL_INTRPT 0x112e -#define RTL8367C_IMS_TM_HIGH_OFFSET 3 -#define RTL8367C_IMS_TM_HIGH_MASK 0x8 -#define RTL8367C_IMR_TM_HIGH_OFFSET 2 -#define RTL8367C_IMR_TM_HIGH_MASK 0x4 -#define RTL8367C_IMS_TM_LOW_OFFSET 1 -#define RTL8367C_IMS_TM_LOW_MASK 0x2 -#define RTL8367C_IMR_TM_LOW_OFFSET 0 -#define RTL8367C_IMR_TM_LOW_MASK 0x1 - -#define RTL8367C_REG_THERMAL_INTRPT_8051 0x112f -#define RTL8367C_IMS_TM_HIGH_8051_OFFSET 3 -#define RTL8367C_IMS_TM_HIGH_8051_MASK 0x8 -#define RTL8367C_IMR_TM_HIGH_8051_OFFSET 2 -#define RTL8367C_IMR_TM_HIGH_8051_MASK 0x4 -#define RTL8367C_IMS_TM_LOW_8051_OFFSET 1 -#define RTL8367C_IMS_TM_LOW_8051_MASK 0x2 -#define RTL8367C_IMR_TM_LOW_8051_OFFSET 0 -#define RTL8367C_IMR_TM_LOW_8051_MASK 0x1 - -#define RTL8367C_REG_SDS_LINK_CHG_INT 0x1130 -#define RTL8367C_IMS_SDS_LINK_STS_C7_OFFSET 15 -#define RTL8367C_IMS_SDS_LINK_STS_C7_MASK 0x8000 -#define RTL8367C_IMS_SDS_LINK_STS_C6_OFFSET 14 -#define RTL8367C_IMS_SDS_LINK_STS_C6_MASK 0x4000 -#define RTL8367C_IMS_SDS_LINK_STS_C5_OFFSET 13 -#define RTL8367C_IMS_SDS_LINK_STS_C5_MASK 0x2000 -#define RTL8367C_IMS_SDS_LINK_STS_C4_OFFSET 12 -#define RTL8367C_IMS_SDS_LINK_STS_C4_MASK 0x1000 -#define RTL8367C_IMS_SDS_LINK_STS_C3_OFFSET 11 -#define RTL8367C_IMS_SDS_LINK_STS_C3_MASK 0x800 -#define RTL8367C_IMS_SDS_LINK_STS_C2_OFFSET 10 -#define RTL8367C_IMS_SDS_LINK_STS_C2_MASK 0x400 -#define RTL8367C_IMS_SDS_LINK_STS_C1_OFFSET 9 -#define RTL8367C_IMS_SDS_LINK_STS_C1_MASK 0x200 -#define RTL8367C_IMS_SDS_LINK_STS_C0_OFFSET 8 -#define RTL8367C_IMS_SDS_LINK_STS_C0_MASK 0x100 -#define RTL8367C_IMR_SDS_LINK_STS_C7_OFFSET 7 -#define RTL8367C_IMR_SDS_LINK_STS_C7_MASK 0x80 -#define RTL8367C_IMR_SDS_LINK_STS_C6_OFFSET 6 -#define RTL8367C_IMR_SDS_LINK_STS_C6_MASK 0x40 -#define RTL8367C_IMR_SDS_LINK_STS_C5_OFFSET 5 -#define RTL8367C_IMR_SDS_LINK_STS_C5_MASK 0x20 -#define RTL8367C_IMR_SDS_LINK_STS_C4_OFFSET 4 -#define RTL8367C_IMR_SDS_LINK_STS_C4_MASK 0x10 -#define RTL8367C_IMR_SDS_LINK_STS_C3_OFFSET 3 -#define RTL8367C_IMR_SDS_LINK_STS_C3_MASK 0x8 -#define RTL8367C_IMR_SDS_LINK_STS_C2_OFFSET 2 -#define RTL8367C_IMR_SDS_LINK_STS_C2_MASK 0x4 -#define RTL8367C_IMR_SDS_LINK_STS_C1_OFFSET 1 -#define RTL8367C_IMR_SDS_LINK_STS_C1_MASK 0x2 -#define RTL8367C_IMR_SDS_LINK_STS_C0_OFFSET 0 -#define RTL8367C_IMR_SDS_LINK_STS_C0_MASK 0x1 - -#define RTL8367C_REG_SDS_LINK_CHG_INT_8051 0x1131 -#define RTL8367C_IMS_SDS_LINK_STS_C7_8051_OFFSET 15 -#define RTL8367C_IMS_SDS_LINK_STS_C7_8051_MASK 0x8000 -#define RTL8367C_IMS_SDS_LINK_STS_C6_8051_OFFSET 14 -#define RTL8367C_IMS_SDS_LINK_STS_C6_8051_MASK 0x4000 -#define RTL8367C_IMS_SDS_LINK_STS_C5_8051_OFFSET 13 -#define RTL8367C_IMS_SDS_LINK_STS_C5_8051_MASK 0x2000 -#define RTL8367C_IMS_SDS_LINK_STS_C4_8051_OFFSET 12 -#define RTL8367C_IMS_SDS_LINK_STS_C4_8051_MASK 0x1000 -#define RTL8367C_IMS_SDS_LINK_STS_C3_8051_OFFSET 11 -#define RTL8367C_IMS_SDS_LINK_STS_C3_8051_MASK 0x800 -#define RTL8367C_IMS_SDS_LINK_STS_C2_8051_OFFSET 10 -#define RTL8367C_IMS_SDS_LINK_STS_C2_8051_MASK 0x400 -#define RTL8367C_IMS_SDS_LINK_STS_C1_8051_OFFSET 9 -#define RTL8367C_IMS_SDS_LINK_STS_C1_8051_MASK 0x200 -#define RTL8367C_IMS_SDS_LINK_STS_C0_8051_OFFSET 8 -#define RTL8367C_IMS_SDS_LINK_STS_C0_8051_MASK 0x100 -#define RTL8367C_IMR_SDS_LINK_STS_C7_8051_OFFSET 7 -#define RTL8367C_IMR_SDS_LINK_STS_C7_8051_MASK 0x80 -#define RTL8367C_IMR_SDS_LINK_STS_C6_8051_OFFSET 6 -#define RTL8367C_IMR_SDS_LINK_STS_C6_8051_MASK 0x40 -#define RTL8367C_IMR_SDS_LINK_STS_C5_8051_OFFSET 5 -#define RTL8367C_IMR_SDS_LINK_STS_C5_8051_MASK 0x20 -#define RTL8367C_IMR_SDS_LINK_STS_C4_8051_OFFSET 4 -#define RTL8367C_IMR_SDS_LINK_STS_C4_8051_MASK 0x10 -#define RTL8367C_IMR_SDS_LINK_STS_C3_8051_OFFSET 3 -#define RTL8367C_IMR_SDS_LINK_STS_C3_8051_MASK 0x8 -#define RTL8367C_IMR_SDS_LINK_STS_C2_8051_OFFSET 2 -#define RTL8367C_IMR_SDS_LINK_STS_C2_8051_MASK 0x4 -#define RTL8367C_IMR_SDS_LINK_STS_C1_8051_OFFSET 1 -#define RTL8367C_IMR_SDS_LINK_STS_C1_8051_MASK 0x2 -#define RTL8367C_IMR_SDS_LINK_STS_C0_8051_OFFSET 0 -#define RTL8367C_IMR_SDS_LINK_STS_C0_8051_MASK 0x1 - -/* (16'h1200)swcore_reg */ - -#define RTL8367C_REG_MAX_LENGTH_LIMINT_IPG 0x1200 -#define RTL8367C_MAX_LENTH_CTRL_OFFSET 13 -#define RTL8367C_MAX_LENTH_CTRL_MASK 0x6000 -#define RTL8367C_PAGES_BEFORE_FCDROP_OFFSET 6 -#define RTL8367C_PAGES_BEFORE_FCDROP_MASK 0x1FC0 -#define RTL8367C_CHECK_MIN_IPG_RXDV_OFFSET 5 -#define RTL8367C_CHECK_MIN_IPG_RXDV_MASK 0x20 -#define RTL8367C_LIMIT_IPG_CFG_OFFSET 0 -#define RTL8367C_LIMIT_IPG_CFG_MASK 0x1F - -#define RTL8367C_REG_IOL_RXDROP_CFG 0x1201 -#define RTL8367C_RX_IOL_MAX_LENGTH_CFG_OFFSET 13 -#define RTL8367C_RX_IOL_MAX_LENGTH_CFG_MASK 0x2000 -#define RTL8367C_RX_IOL_ERROR_LENGTH_CFG_OFFSET 12 -#define RTL8367C_RX_IOL_ERROR_LENGTH_CFG_MASK 0x1000 -#define RTL8367C_RX_NODROP_PAUSE_CFG_OFFSET 8 -#define RTL8367C_RX_NODROP_PAUSE_CFG_MASK 0x100 -#define RTL8367C_RX_DV_CNT_CFG_OFFSET 0 -#define RTL8367C_RX_DV_CNT_CFG_MASK 0x3F - -#define RTL8367C_REG_VS_TPID 0x1202 - -#define RTL8367C_REG_INBW_BOUND 0x1203 -#define RTL8367C_LBOUND_OFFSET 4 -#define RTL8367C_LBOUND_MASK 0xF0 -#define RTL8367C_HBOUND_OFFSET 0 -#define RTL8367C_HBOUND_MASK 0xF - -#define RTL8367C_REG_CFG_TX_ITFSP_OP 0x1204 -#define RTL8367C_MASK_OFFSET 1 -#define RTL8367C_MASK_MASK 0x2 -#define RTL8367C_OP_OFFSET 0 -#define RTL8367C_OP_MASK 0x1 - -#define RTL8367C_REG_INBW_BOUND2 0x1205 -#define RTL8367C_LBOUND2_H_OFFSET 9 -#define RTL8367C_LBOUND2_H_MASK 0x200 -#define RTL8367C_HBOUND2_H_OFFSET 8 -#define RTL8367C_HBOUND2_H_MASK 0x100 -#define RTL8367C_LBOUND2_OFFSET 4 -#define RTL8367C_LBOUND2_MASK 0xF0 -#define RTL8367C_HBOUND2_OFFSET 0 -#define RTL8367C_HBOUND2_MASK 0xF - -#define RTL8367C_REG_CFG_48PASS1_DROP 0x1206 -#define RTL8367C_CFG_48PASS1_DROP_OFFSET 0 -#define RTL8367C_CFG_48PASS1_DROP_MASK 0x1 - -#define RTL8367C_REG_CFG_BACKPRESSURE 0x1207 -#define RTL8367C_LONGTXE_OFFSET 12 -#define RTL8367C_LONGTXE_MASK 0x1000 -#define RTL8367C_EN_BYPASS_ERROR_OFFSET 8 -#define RTL8367C_EN_BYPASS_ERROR_MASK 0x100 -#define RTL8367C_EN_BACKPRESSURE_OFFSET 4 -#define RTL8367C_EN_BACKPRESSURE_MASK 0x10 -#define RTL8367C_EN_48_PASS_1_OFFSET 0 -#define RTL8367C_EN_48_PASS_1_MASK 0x1 - -#define RTL8367C_REG_CFG_UNHIOL 0x1208 -#define RTL8367C_IOL_BACKOFF_OFFSET 12 -#define RTL8367C_IOL_BACKOFF_MASK 0x1000 -#define RTL8367C_BACKOFF_RANDOM_TIME_OFFSET 8 -#define RTL8367C_BACKOFF_RANDOM_TIME_MASK 0x100 -#define RTL8367C_DISABLE_BACK_OFF_OFFSET 4 -#define RTL8367C_DISABLE_BACK_OFF_MASK 0x10 -#define RTL8367C_IPG_COMPENSATION_OFFSET 0 -#define RTL8367C_IPG_COMPENSATION_MASK 0x1 - -#define RTL8367C_REG_SWITCH_MAC0 0x1209 - -#define RTL8367C_REG_SWITCH_MAC1 0x120a - -#define RTL8367C_REG_SWITCH_MAC2 0x120b - -#define RTL8367C_REG_SWITCH_CTRL0 0x120c -#define RTL8367C_REMARKING_DSCP_ENABLE_OFFSET 8 -#define RTL8367C_REMARKING_DSCP_ENABLE_MASK 0x100 -#define RTL8367C_SHORT_IPG_OFFSET 4 -#define RTL8367C_SHORT_IPG_MASK 0x10 -#define RTL8367C_PAUSE_MAX128_OFFSET 0 -#define RTL8367C_PAUSE_MAX128_MASK 0x1 - -#define RTL8367C_REG_QOS_DSCP_REMARK_CTRL0 0x120d -#define RTL8367C_INTPRI1_DSCP_OFFSET 8 -#define RTL8367C_INTPRI1_DSCP_MASK 0x3F00 -#define RTL8367C_INTPRI0_DSCP_OFFSET 0 -#define RTL8367C_INTPRI0_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_CTRL1 0x120e -#define RTL8367C_INTPRI3_DSCP_OFFSET 8 -#define RTL8367C_INTPRI3_DSCP_MASK 0x3F00 -#define RTL8367C_INTPRI2_DSCP_OFFSET 0 -#define RTL8367C_INTPRI2_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_CTRL2 0x120f -#define RTL8367C_INTPRI5_DSCP_OFFSET 8 -#define RTL8367C_INTPRI5_DSCP_MASK 0x3F00 -#define RTL8367C_INTPRI4_DSCP_OFFSET 0 -#define RTL8367C_INTPRI4_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_DSCP_REMARK_CTRL3 0x1210 -#define RTL8367C_INTPRI7_DSCP_OFFSET 8 -#define RTL8367C_INTPRI7_DSCP_MASK 0x3F00 -#define RTL8367C_INTPRI6_DSCP_OFFSET 0 -#define RTL8367C_INTPRI6_DSCP_MASK 0x3F - -#define RTL8367C_REG_QOS_1Q_REMARK_CTRL0 0x1211 -#define RTL8367C_INTPRI3_PRI_OFFSET 12 -#define RTL8367C_INTPRI3_PRI_MASK 0x7000 -#define RTL8367C_INTPRI2_PRI_OFFSET 8 -#define RTL8367C_INTPRI2_PRI_MASK 0x700 -#define RTL8367C_INTPRI1_PRI_OFFSET 4 -#define RTL8367C_INTPRI1_PRI_MASK 0x70 -#define RTL8367C_INTPRI0_PRI_OFFSET 0 -#define RTL8367C_INTPRI0_PRI_MASK 0x7 - -#define RTL8367C_REG_QOS_1Q_REMARK_CTRL1 0x1212 -#define RTL8367C_INTPRI7_PRI_OFFSET 12 -#define RTL8367C_INTPRI7_PRI_MASK 0x7000 -#define RTL8367C_INTPRI6_PRI_OFFSET 8 -#define RTL8367C_INTPRI6_PRI_MASK 0x700 -#define RTL8367C_INTPRI5_PRI_OFFSET 4 -#define RTL8367C_INTPRI5_PRI_MASK 0x70 -#define RTL8367C_INTPRI4_PRI_OFFSET 0 -#define RTL8367C_INTPRI4_PRI_MASK 0x7 - -#define RTL8367C_REG_PKTGEN_COMMAND 0x1213 -#define RTL8367C_PKTGEN_STOP_OFFSET 8 -#define RTL8367C_PKTGEN_STOP_MASK 0x100 -#define RTL8367C_PKTGEN_START_OFFSET 4 -#define RTL8367C_PKTGEN_START_MASK 0x10 -#define RTL8367C_PKTGEN_BYPASS_FLOWCONTROL_OFFSET 0 -#define RTL8367C_PKTGEN_BYPASS_FLOWCONTROL_MASK 0x1 - -#define RTL8367C_REG_SW_DUMMY0 0x1214 -#define RTL8367C_SW_DUMMY0_DUMMY_OFFSET 4 -#define RTL8367C_SW_DUMMY0_DUMMY_MASK 0xFFF0 -#define RTL8367C_EEE_DEFER_TXLPI_OFFSET 3 -#define RTL8367C_EEE_DEFER_TXLPI_MASK 0x8 -#define RTL8367C_INGRESSBW_BYPASS_EN_OFFSET 2 -#define RTL8367C_INGRESSBW_BYPASS_EN_MASK 0x4 -#define RTL8367C_CFG_RX_MIN_OFFSET 0 -#define RTL8367C_CFG_RX_MIN_MASK 0x3 - -#define RTL8367C_REG_SW_DUMMY1 0x1215 - -#define RTL8367C_REG_PKTGEN_PAUSE_TIME 0x1216 - -#define RTL8367C_REG_SVLAN_UPLINK_PORTMASK 0x1218 -#define RTL8367C_SVLAN_UPLINK_PORTMASK_OFFSET 0 -#define RTL8367C_SVLAN_UPLINK_PORTMASK_MASK 0x7FF - -#define RTL8367C_REG_CPU_PORT_MASK 0x1219 -#define RTL8367C_CPU_PORT_MASK_OFFSET 0 -#define RTL8367C_CPU_PORT_MASK_MASK 0x7FF - -#define RTL8367C_REG_CPU_CTRL 0x121a -#define RTL8367C_CPU_TRAP_PORT_EXT_OFFSET 10 -#define RTL8367C_CPU_TRAP_PORT_EXT_MASK 0x400 -#define RTL8367C_CPU_TAG_FORMAT_OFFSET 9 -#define RTL8367C_CPU_TAG_FORMAT_MASK 0x200 -#define RTL8367C_IOL_16DROP_OFFSET 8 -#define RTL8367C_IOL_16DROP_MASK 0x100 -#define RTL8367C_CPU_TAG_RXBYTECOUNT_OFFSET 7 -#define RTL8367C_CPU_TAG_RXBYTECOUNT_MASK 0x80 -#define RTL8367C_CPU_TAG_POSITION_OFFSET 6 -#define RTL8367C_CPU_TAG_POSITION_MASK 0x40 -#define RTL8367C_CPU_TRAP_PORT_OFFSET 3 -#define RTL8367C_CPU_TRAP_PORT_MASK 0x38 -#define RTL8367C_CPU_INSERTMODE_OFFSET 1 -#define RTL8367C_CPU_INSERTMODE_MASK 0x6 -#define RTL8367C_CPU_EN_OFFSET 0 -#define RTL8367C_CPU_EN_MASK 0x1 - -#define RTL8367C_REG_MIRROR_CTRL 0x121c -#define RTL8367C_MIRROR_CTRL_DUMMY_OFFSET 12 -#define RTL8367C_MIRROR_CTRL_DUMMY_MASK 0xF000 -#define RTL8367C_MIRROR_ISO_OFFSET 11 -#define RTL8367C_MIRROR_ISO_MASK 0x800 -#define RTL8367C_MIRROR_TX_OFFSET 10 -#define RTL8367C_MIRROR_TX_MASK 0x400 -#define RTL8367C_MIRROR_RX_OFFSET 9 -#define RTL8367C_MIRROR_RX_MASK 0x200 -#define RTL8367C_MIRROR_MONITOR_PORT_OFFSET 4 -#define RTL8367C_MIRROR_MONITOR_PORT_MASK 0xF0 -#define RTL8367C_MIRROR_SOURCE_PORT_OFFSET 0 -#define RTL8367C_MIRROR_SOURCE_PORT_MASK 0xF - -#define RTL8367C_REG_FLOWCTRL_CTRL0 0x121d -#define RTL8367C_FLOWCTRL_TYPE_OFFSET 15 -#define RTL8367C_FLOWCTRL_TYPE_MASK 0x8000 -#define RTL8367C_DROP_ALL_THRESHOLD_OFFSET 5 -#define RTL8367C_DROP_ALL_THRESHOLD_MASK 0x7FE0 -#define RTL8367C_DROP_ALL_THRESHOLD_MSB_OFFSET 4 -#define RTL8367C_DROP_ALL_THRESHOLD_MSB_MASK 0x10 -#define RTL8367C_ITFSP_REG_OFFSET 0 -#define RTL8367C_ITFSP_REG_MASK 0x7 - -#define RTL8367C_REG_FLOWCTRL_ALL_ON 0x121e -#define RTL8367C_CFG_RLDPACT_OFFSET 12 -#define RTL8367C_CFG_RLDPACT_MASK 0x1000 -#define RTL8367C_FLOWCTRL_ALL_ON_THRESHOLD_OFFSET 0 -#define RTL8367C_FLOWCTRL_ALL_ON_THRESHOLD_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_SYS_ON 0x121f -#define RTL8367C_FLOWCTRL_SYS_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_SYS_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_SYS_OFF 0x1220 -#define RTL8367C_FLOWCTRL_SYS_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_SYS_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_SHARE_ON 0x1221 -#define RTL8367C_FLOWCTRL_SHARE_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_SHARE_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_SHARE_OFF 0x1222 -#define RTL8367C_FLOWCTRL_SHARE_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_SHARE_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_SYS_ON 0x1223 -#define RTL8367C_FLOWCTRL_FCOFF_SYS_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_SYS_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_SYS_OFF 0x1224 -#define RTL8367C_FLOWCTRL_FCOFF_SYS_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_SYS_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_SHARE_ON 0x1225 -#define RTL8367C_FLOWCTRL_FCOFF_SHARE_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_SHARE_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_SHARE_OFF 0x1226 -#define RTL8367C_FLOWCTRL_FCOFF_SHARE_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_SHARE_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_ON 0x1227 -#define RTL8367C_FLOWCTRL_PORT_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_OFF 0x1228 -#define RTL8367C_FLOWCTRL_PORT_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_PRIVATE_ON 0x1229 -#define RTL8367C_FLOWCTRL_PORT_PRIVATE_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_PRIVATE_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT_PRIVATE_OFF 0x122a -#define RTL8367C_FLOWCTRL_PORT_PRIVATE_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT_PRIVATE_OFF_MASK 0x7FF - -#define RTL8367C_REG_RRCP_CTRL0 0x122b -#define RTL8367C_COL_SEL_OFFSET 14 -#define RTL8367C_COL_SEL_MASK 0x4000 -#define RTL8367C_CRS_SEL_OFFSET 13 -#define RTL8367C_CRS_SEL_MASK 0x2000 -#define RTL8367C_RRCP_PBVLAN_EN_OFFSET 11 -#define RTL8367C_RRCP_PBVLAN_EN_MASK 0x800 -#define RTL8367C_RRCPV3_SECURITY_CRC_OFFSET 10 -#define RTL8367C_RRCPV3_SECURITY_CRC_MASK 0x400 -#define RTL8367C_RRCPV3_HANDLE_OFFSET 8 -#define RTL8367C_RRCPV3_HANDLE_MASK 0x300 -#define RTL8367C_RRCPV1_MALFORMED_ACT_OFFSET 5 -#define RTL8367C_RRCPV1_MALFORMED_ACT_MASK 0x60 -#define RTL8367C_RRCP_VLANLEAKY_OFFSET 4 -#define RTL8367C_RRCP_VLANLEAKY_MASK 0x10 -#define RTL8367C_RRCPV1_SECURITY_CRC_GET_OFFSET 3 -#define RTL8367C_RRCPV1_SECURITY_CRC_GET_MASK 0x8 -#define RTL8367C_RRCPV1_SECURITY_CRC_SET_OFFSET 2 -#define RTL8367C_RRCPV1_SECURITY_CRC_SET_MASK 0x4 -#define RTL8367C_RRCPV1_HANDLE_OFFSET 1 -#define RTL8367C_RRCPV1_HANDLE_MASK 0x2 -#define RTL8367C_RRCP_ENABLE_OFFSET 0 -#define RTL8367C_RRCP_ENABLE_MASK 0x1 - -#define RTL8367C_REG_RRCP_CTRL1 0x122c -#define RTL8367C_RRCP_ADMIN_PMSK_OFFSET 8 -#define RTL8367C_RRCP_ADMIN_PMSK_MASK 0xFF00 -#define RTL8367C_RRCP_AUTH_PMSK_OFFSET 0 -#define RTL8367C_RRCP_AUTH_PMSK_MASK 0xFF - -#define RTL8367C_REG_RRCP_CTRL2 0x122d -#define RTL8367C_RRCPV1_HELLOFWD_TAG_OFFSET 9 -#define RTL8367C_RRCPV1_HELLOFWD_TAG_MASK 0x600 -#define RTL8367C_RRCP_FWD_TAG_OFFSET 7 -#define RTL8367C_RRCP_FWD_TAG_MASK 0x180 -#define RTL8367C_RRCPV1_REPLY_TAG_OFFSET 6 -#define RTL8367C_RRCPV1_REPLY_TAG_MASK 0x40 -#define RTL8367C_RRCPV1_HELLO_COUNT_OFFSET 3 -#define RTL8367C_RRCPV1_HELLO_COUNT_MASK 0x38 -#define RTL8367C_RRCPV1_HELLO_PEDIOD_OFFSET 0 -#define RTL8367C_RRCPV1_HELLO_PEDIOD_MASK 0x3 - -#define RTL8367C_REG_RRCP_CTRL3 0x122e -#define RTL8367C_RRCP_TAG_PRIORITY_OFFSET 13 -#define RTL8367C_RRCP_TAG_PRIORITY_MASK 0xE000 -#define RTL8367C_RRCP_TAG_VID_OFFSET 0 -#define RTL8367C_RRCP_TAG_VID_MASK 0xFFF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_PORT_ON 0x122f -#define RTL8367C_FLOWCTRL_FCOFF_PORT_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_PORT_OFF 0x1230 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_PORT_PRIVATE_ON 0x1231 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF 0x1232 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_SYS_ON 0x1233 -#define RTL8367C_FLOWCTRL_JUMBO_SYS_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_SYS_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_SYS_OFF 0x1234 -#define RTL8367C_FLOWCTRL_JUMBO_SYS_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_SYS_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_SHARE_ON 0x1235 -#define RTL8367C_FLOWCTRL_JUMBO_SHARE_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_SHARE_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_SHARE_OFF 0x1236 -#define RTL8367C_FLOWCTRL_JUMBO_SHARE_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_SHARE_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_PORT_ON 0x1237 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_PORT_OFF 0x1238 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_PORT_PRIVATE_ON 0x1239 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_ON_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_ON_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF 0x123a -#define RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF_OFFSET 0 -#define RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_JUMBO_SIZE 0x123b -#define RTL8367C_JUMBO_MODE_OFFSET 2 -#define RTL8367C_JUMBO_MODE_MASK 0x4 -#define RTL8367C_JUMBO_SIZE_OFFSET 0 -#define RTL8367C_JUMBO_SIZE_MASK 0x3 - -#define RTL8367C_REG_FLOWCTRL_TOTAL_PAGE_COUNTER 0x124c -#define RTL8367C_FLOWCTRL_TOTAL_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_TOTAL_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PUBLIC_PAGE_COUNTER 0x124d -#define RTL8367C_FLOWCTRL_PUBLIC_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PUBLIC_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_TOTAL_PAGE_MAX 0x124e -#define RTL8367C_FLOWCTRL_TOTAL_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_TOTAL_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PUBLIC_PAGE_MAX 0x124f -#define RTL8367C_FLOWCTRL_PUBLIC_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PUBLIC_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT0_PAGE_COUNTER 0x1250 -#define RTL8367C_FLOWCTRL_PORT0_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT0_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT1_PAGE_COUNTER 0x1251 -#define RTL8367C_FLOWCTRL_PORT1_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT1_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT2_PAGE_COUNTER 0x1252 -#define RTL8367C_FLOWCTRL_PORT2_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT2_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT3_PAGE_COUNTER 0x1253 -#define RTL8367C_FLOWCTRL_PORT3_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT3_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT4_PAGE_COUNTER 0x1254 -#define RTL8367C_FLOWCTRL_PORT4_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT4_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT5_PAGE_COUNTER 0x1255 -#define RTL8367C_FLOWCTRL_PORT5_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT5_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT6_PAGE_COUNTER 0x1256 -#define RTL8367C_FLOWCTRL_PORT6_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT6_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT7_PAGE_COUNTER 0x1257 -#define RTL8367C_FLOWCTRL_PORT7_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT7_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PUBLIC_FCOFF_PAGE_COUNTER 0x1258 -#define RTL8367C_FLOWCTRL_PUBLIC_FCOFF_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PUBLIC_FCOFF_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PUBLIC_JUMBO_PAGE_COUNTER 0x1259 -#define RTL8367C_FLOWCTRL_PUBLIC_JUMBO_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PUBLIC_JUMBO_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_MAX_PUBLIC_FCOFF_PAGE_COUNTER 0x125a -#define RTL8367C_FLOWCTRL_MAX_PUBLIC_FCOFF_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_MAX_PUBLIC_FCOFF_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_MAX_PUBLIC_JUMBO_PAGE_COUNTER 0x125b -#define RTL8367C_FLOWCTRL_MAX_PUBLIC_JUMBO_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_MAX_PUBLIC_JUMBO_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT0_PAGE_MAX 0x1260 -#define RTL8367C_FLOWCTRL_PORT0_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT0_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT1_PAGE_MAX 0x1261 -#define RTL8367C_FLOWCTRL_PORT1_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT1_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT2_PAGE_MAX 0x1262 -#define RTL8367C_FLOWCTRL_PORT2_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT2_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT3_PAGE_MAX 0x1263 -#define RTL8367C_FLOWCTRL_PORT3_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT3_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT4_PAGE_MAX 0x1264 -#define RTL8367C_FLOWCTRL_PORT4_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT4_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT5_PAGE_MAX 0x1265 -#define RTL8367C_FLOWCTRL_PORT5_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT5_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT6_PAGE_MAX 0x1266 -#define RTL8367C_FLOWCTRL_PORT6_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT6_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT7_PAGE_MAX 0x1267 -#define RTL8367C_FLOWCTRL_PORT7_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT7_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PAGE_COUNT_CLEAR 0x1268 -#define RTL8367C_DIS_SKIP_FP_OFFSET 1 -#define RTL8367C_DIS_SKIP_FP_MASK 0x2 -#define RTL8367C_PAGE_COUNT_CLEAR_OFFSET 0 -#define RTL8367C_PAGE_COUNT_CLEAR_MASK 0x1 - -#define RTL8367C_REG_FLOWCTRL_PORT8_PAGE_MAX 0x1269 -#define RTL8367C_FLOWCTRL_PORT8_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT8_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT9_PAGE_MAX 0x126a -#define RTL8367C_FLOWCTRL_PORT9_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT9_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT10_PAGE_MAX 0x126b -#define RTL8367C_FLOWCTRL_PORT10_PAGE_MAX_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT10_PAGE_MAX_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT8_PAGE_COUNTER 0x126c -#define RTL8367C_FLOWCTRL_PORT8_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT8_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT9_PAGE_COUNTER 0x126d -#define RTL8367C_FLOWCTRL_PORT9_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT9_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_FLOWCTRL_PORT10_PAGE_COUNTER 0x126e -#define RTL8367C_FLOWCTRL_PORT10_PAGE_COUNTER_OFFSET 0 -#define RTL8367C_FLOWCTRL_PORT10_PAGE_COUNTER_MASK 0x7FF - -#define RTL8367C_REG_RRCP_CTRL1_H 0x126f -#define RTL8367C_RRCP_ADMIN_PMSK_P10_8_OFFSET 3 -#define RTL8367C_RRCP_ADMIN_PMSK_P10_8_MASK 0x38 -#define RTL8367C_RRCP_AUTH_PMSK_P10_8_OFFSET 0 -#define RTL8367C_RRCP_AUTH_PMSK_P10_8_MASK 0x7 - -#define RTL8367C_REG_EMA_CTRL0 0x1270 -#define RTL8367C_CFG_DVSE_VIAROM_OFFSET 13 -#define RTL8367C_CFG_DVSE_VIAROM_MASK 0x2000 -#define RTL8367C_CFG_DVSE_MIBRAM_OFFSET 12 -#define RTL8367C_CFG_DVSE_MIBRAM_MASK 0x1000 -#define RTL8367C_CFG_DVSE_IROM_OFFSET 11 -#define RTL8367C_CFG_DVSE_IROM_MASK 0x800 -#define RTL8367C_CFG_DVSE_ERAM_OFFSET 10 -#define RTL8367C_CFG_DVSE_ERAM_MASK 0x400 -#define RTL8367C_CFG_DVSE_IRAM_OFFSET 9 -#define RTL8367C_CFG_DVSE_IRAM_MASK 0x200 -#define RTL8367C_CFG_DVSE_NICRAM_OFFSET 8 -#define RTL8367C_CFG_DVSE_NICRAM_MASK 0x100 -#define RTL8367C_CFG_DVSE_CVLANRAM_OFFSET 7 -#define RTL8367C_CFG_DVSE_CVLANRAM_MASK 0x80 -#define RTL8367C_CFG_DVSE_ACTRAM_OFFSET 6 -#define RTL8367C_CFG_DVSE_ACTRAM_MASK 0x40 -#define RTL8367C_CFG_DVSE_INQRAM_OFFSET 5 -#define RTL8367C_CFG_DVSE_INQRAM_MASK 0x20 -#define RTL8367C_CFG_DVSE_HSARAM_OFFSET 4 -#define RTL8367C_CFG_DVSE_HSARAM_MASK 0x10 -#define RTL8367C_CFG_DVSE_OUTQRAM_OFFSET 3 -#define RTL8367C_CFG_DVSE_OUTQRAM_MASK 0x8 -#define RTL8367C_CFG_DVSE_HTRAM_OFFSET 2 -#define RTL8367C_CFG_DVSE_HTRAM_MASK 0x4 -#define RTL8367C_CFG_DVSE_PBRAM_OFFSET 1 -#define RTL8367C_CFG_DVSE_PBRAM_MASK 0x2 -#define RTL8367C_CFG_DVSE_L2RAM_OFFSET 0 -#define RTL8367C_CFG_DVSE_L2RAM_MASK 0x1 - -#define RTL8367C_REG_EMA_CTRL1 0x1271 -#define RTL8367C_CFG_DVS_OUTQRAM_OFFSET 12 -#define RTL8367C_CFG_DVS_OUTQRAM_MASK 0xF000 -#define RTL8367C_CFG_DVS_HTRAM_OFFSET 8 -#define RTL8367C_CFG_DVS_HTRAM_MASK 0x700 -#define RTL8367C_CFG_DVS_PBRAM_OFFSET 4 -#define RTL8367C_CFG_DVS_PBRAM_MASK 0xF0 -#define RTL8367C_CFG_DVS_L2RAM_OFFSET 0 -#define RTL8367C_CFG_DVS_L2RAM_MASK 0xF - -#define RTL8367C_REG_EMA_CTRL2 0x1272 -#define RTL8367C_CFG_DVS_CVLANRAM_OFFSET 12 -#define RTL8367C_CFG_DVS_CVLANRAM_MASK 0xF000 -#define RTL8367C_CFG_DVS_ACTRAM_OFFSET 8 -#define RTL8367C_CFG_DVS_ACTRAM_MASK 0xF00 -#define RTL8367C_CFG_DVS_INQRAM_OFFSET 4 -#define RTL8367C_CFG_DVS_INQRAM_MASK 0xF0 -#define RTL8367C_CFG_DVS_HSARAM_OFFSET 0 -#define RTL8367C_CFG_DVS_HSARAM_MASK 0xF - -#define RTL8367C_REG_EMA_CTRL3 0x1273 -#define RTL8367C_CFG_DVS_IROM_OFFSET 12 -#define RTL8367C_CFG_DVS_IROM_MASK 0xF000 -#define RTL8367C_CFG_DVS_ERAM_OFFSET 8 -#define RTL8367C_CFG_DVS_ERAM_MASK 0xF00 -#define RTL8367C_CFG_DVS_IRAM_OFFSET 4 -#define RTL8367C_CFG_DVS_IRAM_MASK 0xF0 -#define RTL8367C_CFG_DVS_NICRAM_OFFSET 0 -#define RTL8367C_CFG_DVS_NICRAM_MASK 0xF - -#define RTL8367C_REG_EMA_CTRL4 0x1274 -#define RTL8367C_CFG_DVS_VIAROM_OFFSET 4 -#define RTL8367C_CFG_DVS_VIAROM_MASK 0xF0 -#define RTL8367C_CFG_DVS_MIBRAM_OFFSET 0 -#define RTL8367C_CFG_DVS_MIBRAM_MASK 0xF - -#define RTL8367C_REG_DIAG_MODE 0x1275 -#define RTL8367C_DIAG_MODE_OFFSET 0 -#define RTL8367C_DIAG_MODE_MASK 0x1F - -#define RTL8367C_REG_BIST_MODE 0x1276 - -#define RTL8367C_REG_STS_BIST_DONE 0x1277 - -#define RTL8367C_REG_STS_BIST_RLT0 0x1278 -#define RTL8367C_STS_BIST_RLT0_OFFSET 0 -#define RTL8367C_STS_BIST_RLT0_MASK 0x1 - -#define RTL8367C_REG_STS_BIST_RLT1 0x1279 - -#define RTL8367C_REG_STS_BIST_RLT2 0x127a - -#define RTL8367C_REG_STS_BIST_RLT3 0x127b -#define RTL8367C_STS_BIST_RLT3_OFFSET 0 -#define RTL8367C_STS_BIST_RLT3_MASK 0x3FF - -#define RTL8367C_REG_STS_BIST_RLT4 0x127c -#define RTL8367C_STS_BIST_RLT4_OFFSET 0 -#define RTL8367C_STS_BIST_RLT4_MASK 0x7 - -#define RTL8367C_REG_VIAROM_MISR 0x127d - -#define RTL8367C_REG_DRF_BIST_MODE 0x1280 -#define RTL8367C_DRF_TCAMDEL_OFFSET 15 -#define RTL8367C_DRF_TCAMDEL_MASK 0x8000 -#define RTL8367C_CFG_DRF_BIST_MODE_OFFSET 0 -#define RTL8367C_CFG_DRF_BIST_MODE_MASK 0x7FFF - -#define RTL8367C_REG_STS_DRF_BIST 0x1281 -#define RTL8367C_STS_DRF_BIST_OFFSET 0 -#define RTL8367C_STS_DRF_BIST_MASK 0x7FFF - -#define RTL8367C_REG_STS_DRF_BIST_RLT0 0x1282 -#define RTL8367C_STS_DRF_BIST_RLT0_OFFSET 0 -#define RTL8367C_STS_DRF_BIST_RLT0_MASK 0x1 - -#define RTL8367C_REG_STS_DRF_BIST_RLT1 0x1283 - -#define RTL8367C_REG_STS_DRF_BIST_RLT2 0x1284 - -#define RTL8367C_REG_STS_DRF_BIST_RLT3 0x1285 -#define RTL8367C_STS_DRF_BIST_RLT3_OFFSET 0 -#define RTL8367C_STS_DRF_BIST_RLT3_MASK 0x3FF - -#define RTL8367C_REG_STS_DRF_BIST_RLT4 0x1286 -#define RTL8367C_STS_DRF_BIST_RLT4_OFFSET 0 -#define RTL8367C_STS_DRF_BIST_RLT4_MASK 0x7FFF - -#define RTL8367C_REG_RAM_DRF_CTRL 0x1289 -#define RTL8367C_RAM_DRF_CTRL_OFFSET 0 -#define RTL8367C_RAM_DRF_CTRL_MASK 0x1 - -#define RTL8367C_REG_MIB_RMON_LEN_CTRL 0x128a -#define RTL8367C_RX_LENGTH_CTRL_OFFSET 1 -#define RTL8367C_RX_LENGTH_CTRL_MASK 0x2 -#define RTL8367C_TX_LENGTH_CTRL_OFFSET 0 -#define RTL8367C_TX_LENGTH_CTRL_MASK 0x1 - -#define RTL8367C_REG_COND0_BISR_OUT0 0x1290 - -#define RTL8367C_REG_COND0_BISR_OUT1 0x1291 - -#define RTL8367C_REG_COND0_BISR_OUT2 0x1292 - -#define RTL8367C_REG_COND0_BISR_OUT3 0x1293 - -#define RTL8367C_REG_COND0_BISR_OUT4 0x1294 -#define RTL8367C_COND0_BISR_OUT4_OFFSET 0 -#define RTL8367C_COND0_BISR_OUT4_MASK 0x3F - -#define RTL8367C_REG_COND0_BISR_OUT5 0x1295 -#define RTL8367C_COND0_BISR_OUT5_OFFSET 0 -#define RTL8367C_COND0_BISR_OUT5_MASK 0x7 - -#define RTL8367C_REG_CHG_DUPLEX_CFG 0x1296 -#define RTL8367C_CHG_COL_CNT_PORT_OFFSET 13 -#define RTL8367C_CHG_COL_CNT_PORT_MASK 0xE000 -#define RTL8367C_CHG_COL_CNT_OFFSET 8 -#define RTL8367C_CHG_COL_CNT_MASK 0x1F00 -#define RTL8367C_CFG_CHG_DUP_EN_OFFSET 7 -#define RTL8367C_CFG_CHG_DUP_EN_MASK 0x80 -#define RTL8367C_CFG_CHG_DUP_THR_OFFSET 2 -#define RTL8367C_CFG_CHG_DUP_THR_MASK 0x7C -#define RTL8367C_CFG_CHG_DUP_CONGEST_OFFSET 1 -#define RTL8367C_CFG_CHG_DUP_CONGEST_MASK 0x2 -#define RTL8367C_CFG_CHG_DUP_REF_OFFSET 0 -#define RTL8367C_CFG_CHG_DUP_REF_MASK 0x1 - -#define RTL8367C_REG_COND0_BIST_PASS 0x1297 -#define RTL8367C_COND0_DRF_BIST_NOFAIL_OFFSET 1 -#define RTL8367C_COND0_DRF_BIST_NOFAIL_MASK 0x2 -#define RTL8367C_COND0_BIST_NOFAIL_OFFSET 0 -#define RTL8367C_COND0_BIST_NOFAIL_MASK 0x1 - -#define RTL8367C_REG_COND1_BISR_OUT0 0x1298 - -#define RTL8367C_REG_COND1_BISR_OUT1 0x1299 - -#define RTL8367C_REG_COND1_BISR_OUT2 0x129a - -#define RTL8367C_REG_COND1_BISR_OUT3 0x129b - -#define RTL8367C_REG_COND1_BISR_OUT4 0x129c -#define RTL8367C_COND1_BISR_OUT4_OFFSET 0 -#define RTL8367C_COND1_BISR_OUT4_MASK 0x3F - -#define RTL8367C_REG_COND1_BISR_OUT5 0x129d -#define RTL8367C_COND1_BISR_OUT5_OFFSET 0 -#define RTL8367C_COND1_BISR_OUT5_MASK 0x7 - -#define RTL8367C_REG_COND1_BIST_PASS 0x129f -#define RTL8367C_COND1_DRF_BIST_NOFAIL_OFFSET 1 -#define RTL8367C_COND1_DRF_BIST_NOFAIL_MASK 0x2 -#define RTL8367C_COND1_BIST_NOFAIL_OFFSET 0 -#define RTL8367C_COND1_BIST_NOFAIL_MASK 0x1 - -#define RTL8367C_REG_EEE_TX_THR_Giga_500M 0x12a0 - -#define RTL8367C_REG_EEE_TX_THR_FE 0x12a1 - -#define RTL8367C_REG_EEE_MISC 0x12a3 -#define RTL8367C_EEE_REQ_SET1_OFFSET 13 -#define RTL8367C_EEE_REQ_SET1_MASK 0x2000 -#define RTL8367C_EEE_REQ_SET0_OFFSET 12 -#define RTL8367C_EEE_REQ_SET0_MASK 0x1000 -#define RTL8367C_EEE_WAKE_SET1_OFFSET 9 -#define RTL8367C_EEE_WAKE_SET1_MASK 0x200 -#define RTL8367C_EEE_Wake_SET0_OFFSET 8 -#define RTL8367C_EEE_Wake_SET0_MASK 0x100 -#define RTL8367C_EEE_TU_GIGA_500M_OFFSET 4 -#define RTL8367C_EEE_TU_GIGA_500M_MASK 0x30 -#define RTL8367C_EEE_TU_100M_OFFSET 2 -#define RTL8367C_EEE_TU_100M_MASK 0xC - -#define RTL8367C_REG_EEE_GIGA_CTRL0 0x12a4 -#define RTL8367C_EEE_TW_GIGA_OFFSET 8 -#define RTL8367C_EEE_TW_GIGA_MASK 0xFF00 -#define RTL8367C_EEE_TR_GIGA_500M_OFFSET 0 -#define RTL8367C_EEE_TR_GIGA_500M_MASK 0xFF - -#define RTL8367C_REG_EEE_GIGA_CTRL1 0x12a5 -#define RTL8367C_EEE_TD_GIGA_500M_OFFSET 8 -#define RTL8367C_EEE_TD_GIGA_500M_MASK 0xFF00 -#define RTL8367C_EEE_TP_GIGA_OFFSET 0 -#define RTL8367C_EEE_TP_GIGA_MASK 0xFF - -#define RTL8367C_REG_EEE_100M_CTRL0 0x12a6 -#define RTL8367C_EEE_TW_100M_OFFSET 8 -#define RTL8367C_EEE_TW_100M_MASK 0xFF00 -#define RTL8367C_EEE_TR_100M_OFFSET 0 -#define RTL8367C_EEE_TR_100M_MASK 0xFF - -#define RTL8367C_REG_EEE_100M_CTRL1 0x12a7 -#define RTL8367C_EEE_TD_100M_OFFSET 8 -#define RTL8367C_EEE_TD_100M_MASK 0xFF00 -#define RTL8367C_EEE_TP_100M_OFFSET 0 -#define RTL8367C_EEE_TP_100M_MASK 0xFF - -#define RTL8367C_REG_RX_FC_REG 0x12aa -#define RTL8367C_EN_EEE_HALF_DUP_OFFSET 8 -#define RTL8367C_EN_EEE_HALF_DUP_MASK 0x100 -#define RTL8367C_RX_PGCNT_OFFSET 0 -#define RTL8367C_RX_PGCNT_MASK 0xFF - -#define RTL8367C_REG_MAX_FIFO_SIZE 0x12af -#define RTL8367C_MAX_FIFO_SIZE_OFFSET 0 -#define RTL8367C_MAX_FIFO_SIZE_MASK 0xF - -#define RTL8367C_REG_EEEP_RX_RATE_GIGA 0x12b0 - -#define RTL8367C_REG_EEEP_RX_RATE_100M 0x12b1 - -#define RTL8367C_REG_DUMMY_REG_12_2 0x12b2 - -#define RTL8367C_REG_EEEP_TX_RATE_GIGA 0x12b3 - -#define RTL8367C_REG_EEEP_TX_RATE_100M 0x12b4 - -#define RTL8367C_REG_DUMMY_REG_12_3 0x12b5 - -#define RTL8367C_REG_EEEP_GIGA_CTRL0 0x12b6 -#define RTL8367C_EEEP_TR_GIGA_OFFSET 8 -#define RTL8367C_EEEP_TR_GIGA_MASK 0xFF00 -#define RTL8367C_EEEP_RW_GIGA_MST_OFFSET 0 -#define RTL8367C_EEEP_RW_GIGA_MST_MASK 0xFF - -#define RTL8367C_REG_EEEP_GIGA_CTRL1 0x12b7 -#define RTL8367C_EEEP_TW_GIGA_OFFSET 8 -#define RTL8367C_EEEP_TW_GIGA_MASK 0xFF00 -#define RTL8367C_EEEP_TP_GIGA_OFFSET 0 -#define RTL8367C_EEEP_TP_GIGA_MASK 0xFF - -#define RTL8367C_REG_EEEP_GIGA_CTRL2 0x12b8 -#define RTL8367C_EEEP_TXEN_GIGA_OFFSET 12 -#define RTL8367C_EEEP_TXEN_GIGA_MASK 0x1000 -#define RTL8367C_EEEP_TU_GIGA_OFFSET 8 -#define RTL8367C_EEEP_TU_GIGA_MASK 0x300 -#define RTL8367C_EEEP_TS_GIGA_OFFSET 0 -#define RTL8367C_EEEP_TS_GIGA_MASK 0xFF - -#define RTL8367C_REG_EEEP_100M_CTRL0 0x12b9 -#define RTL8367C_EEEP_TR_100M_OFFSET 8 -#define RTL8367C_EEEP_TR_100M_MASK 0xFF00 -#define RTL8367C_EEEP_RW_100M_OFFSET 0 -#define RTL8367C_EEEP_RW_100M_MASK 0xFF - -#define RTL8367C_REG_EEEP_100M_CTRL1 0x12ba -#define RTL8367C_EEEP_TW_100M_OFFSET 8 -#define RTL8367C_EEEP_TW_100M_MASK 0xFF00 -#define RTL8367C_EEEP_TP_100M_OFFSET 0 -#define RTL8367C_EEEP_TP_100M_MASK 0xFF - -#define RTL8367C_REG_EEEP_100M_CTRL2 0x12bb -#define RTL8367C_EEEP_TXEN_100M_OFFSET 12 -#define RTL8367C_EEEP_TXEN_100M_MASK 0x1000 -#define RTL8367C_EEEP_TU_100M_OFFSET 8 -#define RTL8367C_EEEP_TU_100M_MASK 0x300 -#define RTL8367C_EEEP_TS_100M_OFFSET 0 -#define RTL8367C_EEEP_TS_100M_MASK 0xFF - -#define RTL8367C_REG_EEEP_CTRL0 0x12bc -#define RTL8367C_EEEP_CTRL0_DUMMY_OFFSET 8 -#define RTL8367C_EEEP_CTRL0_DUMMY_MASK 0xFF00 -#define RTL8367C_EEEP_SLEEP_STEP_OFFSET 0 -#define RTL8367C_EEEP_SLEEP_STEP_MASK 0xFF - -#define RTL8367C_REG_EEEP_CTRL1 0x12bd -#define RTL8367C_EEEP_TXR_GIGA_OFFSET 8 -#define RTL8367C_EEEP_TXR_GIGA_MASK 0xFF00 -#define RTL8367C_EEEP_TXR_100M_OFFSET 0 -#define RTL8367C_EEEP_TXR_100M_MASK 0xFF - -#define RTL8367C_REG_BACK_PRESSURE_IPG 0x12be -#define RTL8367C_BACK_PRESSURE_IPG_OFFSET 0 -#define RTL8367C_BACK_PRESSURE_IPG_MASK 0x3 - -#define RTL8367C_REG_TX_ESD_LEVEL 0x12bf -#define RTL8367C_TX_ESD_LEVEL_MODE_OFFSET 8 -#define RTL8367C_TX_ESD_LEVEL_MODE_MASK 0x100 -#define RTL8367C_LEVEL_OFFSET 0 -#define RTL8367C_LEVEL_MASK 0xFF - -#define RTL8367C_REG_RRCP_CTRL4 0x12e0 - -#define RTL8367C_REG_RRCP_CTRL5 0x12e1 - -#define RTL8367C_REG_RRCP_CTRL6 0x12e2 - -#define RTL8367C_REG_RRCP_CTRL7 0x12e3 - -#define RTL8367C_REG_RRCP_CTRL8 0x12e4 - -#define RTL8367C_REG_RRCP_CTRL9 0x12e5 - -#define RTL8367C_REG_RRCP_CTRL10 0x12e6 - -#define RTL8367C_REG_FIELD_SELECTOR0 0x12e7 -#define RTL8367C_FIELD_SELECTOR0_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR0_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR0_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR0_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR1 0x12e8 -#define RTL8367C_FIELD_SELECTOR1_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR1_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR1_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR1_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR2 0x12e9 -#define RTL8367C_FIELD_SELECTOR2_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR2_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR2_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR2_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR3 0x12ea -#define RTL8367C_FIELD_SELECTOR3_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR3_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR3_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR3_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR4 0x12eb -#define RTL8367C_FIELD_SELECTOR4_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR4_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR4_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR4_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR5 0x12ec -#define RTL8367C_FIELD_SELECTOR5_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR5_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR5_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR5_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR6 0x12ed -#define RTL8367C_FIELD_SELECTOR6_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR6_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR6_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR6_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR7 0x12ee -#define RTL8367C_FIELD_SELECTOR7_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR7_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR7_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR7_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR8 0x12ef -#define RTL8367C_FIELD_SELECTOR8_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR8_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR8_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR8_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR9 0x12f0 -#define RTL8367C_FIELD_SELECTOR9_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR9_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR9_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR9_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR10 0x12f1 -#define RTL8367C_FIELD_SELECTOR10_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR10_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR10_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR10_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR11 0x12f2 -#define RTL8367C_FIELD_SELECTOR11_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR11_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR11_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR11_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR12 0x12f3 -#define RTL8367C_FIELD_SELECTOR12_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR12_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR12_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR12_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR13 0x12f4 -#define RTL8367C_FIELD_SELECTOR13_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR13_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR13_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR13_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR14 0x12f5 -#define RTL8367C_FIELD_SELECTOR14_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR14_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR14_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR14_OFFSET_MASK 0xFF - -#define RTL8367C_REG_FIELD_SELECTOR15 0x12f6 -#define RTL8367C_FIELD_SELECTOR15_FORMAT_OFFSET 8 -#define RTL8367C_FIELD_SELECTOR15_FORMAT_MASK 0x700 -#define RTL8367C_FIELD_SELECTOR15_OFFSET_OFFSET 0 -#define RTL8367C_FIELD_SELECTOR15_OFFSET_MASK 0xFF - -#define RTL8367C_REG_HWPKT_GEN_MISC_H 0x12f7 -#define RTL8367C_PKT_GEN_SUSPEND_P10_8_OFFSET 3 -#define RTL8367C_PKT_GEN_SUSPEND_P10_8_MASK 0x38 -#define RTL8367C_PKT_GEN_STATUS_P10_8_OFFSET 0 -#define RTL8367C_PKT_GEN_STATUS_P10_8_MASK 0x7 - -#define RTL8367C_REG_MIRROR_SRC_PMSK 0x12fb -#define RTL8367C_MIRROR_SRC_PMSK_OFFSET 0 -#define RTL8367C_MIRROR_SRC_PMSK_MASK 0x7FF - -#define RTL8367C_REG_EEE_BURSTSIZE 0x12fc - -#define RTL8367C_REG_EEE_IFG_CFG 0x12fd -#define RTL8367C_EEE_IFG_CFG_OFFSET 0 -#define RTL8367C_EEE_IFG_CFG_MASK 0x1 - -#define RTL8367C_REG_FPGA_VER_MAC 0x12fe - -#define RTL8367C_REG_HWPKT_GEN_MISC 0x12ff -#define RTL8367C_PKT_GEN_SUSPEND_OFFSET 8 -#define RTL8367C_PKT_GEN_SUSPEND_MASK 0xFF00 -#define RTL8367C_PKT_GEN_STATUS_OFFSET 0 -#define RTL8367C_PKT_GEN_STATUS_MASK 0xFF - -/* (16'h1300)chip_reg */ - -#define RTL8367C_REG_CHIP_NUMBER 0x1300 - -#define RTL8367C_REG_CHIP_VER 0x1301 -#define RTL8367C_VERID_OFFSET 12 -#define RTL8367C_VERID_MASK 0xF000 -#define RTL8367C_MCID_OFFSET 8 -#define RTL8367C_MCID_MASK 0xF00 -#define RTL8367C_MODEL_ID_OFFSET 4 -#define RTL8367C_MODEL_ID_MASK 0xF0 -#define RTL8367C_AFE_VERSION_OFFSET 0 -#define RTL8367C_AFE_VERSION_MASK 0x1 - -#define RTL8367C_REG_CHIP_DEBUG0 0x1303 -#define RTL8367C_SEL33_EXT2_OFFSET 10 -#define RTL8367C_SEL33_EXT2_MASK 0x400 -#define RTL8367C_SEL33_EXT1_OFFSET 9 -#define RTL8367C_SEL33_EXT1_MASK 0x200 -#define RTL8367C_SEL33_EXT0_OFFSET 8 -#define RTL8367C_SEL33_EXT0_MASK 0x100 -#define RTL8367C_DRI_OTHER_OFFSET 7 -#define RTL8367C_DRI_OTHER_MASK 0x80 -#define RTL8367C_DRI_EXT1_RG_OFFSET 6 -#define RTL8367C_DRI_EXT1_RG_MASK 0x40 -#define RTL8367C_DRI_EXT0_RG_OFFSET 5 -#define RTL8367C_DRI_EXT0_RG_MASK 0x20 -#define RTL8367C_DRI_EXT1_OFFSET 4 -#define RTL8367C_DRI_EXT1_MASK 0x10 -#define RTL8367C_DRI_EXT0_OFFSET 3 -#define RTL8367C_DRI_EXT0_MASK 0x8 -#define RTL8367C_SLR_OTHER_OFFSET 2 -#define RTL8367C_SLR_OTHER_MASK 0x4 -#define RTL8367C_SLR_EXT1_OFFSET 1 -#define RTL8367C_SLR_EXT1_MASK 0x2 -#define RTL8367C_SLR_EXT0_OFFSET 0 -#define RTL8367C_SLR_EXT0_MASK 0x1 - -#define RTL8367C_REG_CHIP_DEBUG1 0x1304 -#define RTL8367C_RG1_DN_OFFSET 12 -#define RTL8367C_RG1_DN_MASK 0x7000 -#define RTL8367C_RG1_DP_OFFSET 8 -#define RTL8367C_RG1_DP_MASK 0x700 -#define RTL8367C_RG0_DN_OFFSET 4 -#define RTL8367C_RG0_DN_MASK 0x70 -#define RTL8367C_RG0_DP_OFFSET 0 -#define RTL8367C_RG0_DP_MASK 0x7 - -#define RTL8367C_REG_DIGITAL_INTERFACE_SELECT 0x1305 -#define RTL8367C_ORG_COL_OFFSET 15 -#define RTL8367C_ORG_COL_MASK 0x8000 -#define RTL8367C_ORG_CRS_OFFSET 14 -#define RTL8367C_ORG_CRS_MASK 0x4000 -#define RTL8367C_SKIP_MII_1_RXER_OFFSET 13 -#define RTL8367C_SKIP_MII_1_RXER_MASK 0x2000 -#define RTL8367C_SKIP_MII_0_RXER_OFFSET 12 -#define RTL8367C_SKIP_MII_0_RXER_MASK 0x1000 -#define RTL8367C_SELECT_GMII_1_OFFSET 4 -#define RTL8367C_SELECT_GMII_1_MASK 0xF0 -#define RTL8367C_SELECT_GMII_0_OFFSET 0 -#define RTL8367C_SELECT_GMII_0_MASK 0xF - -#define RTL8367C_REG_EXT0_RGMXF 0x1306 -#define RTL8367C_EXT0_RGTX_INV_OFFSET 6 -#define RTL8367C_EXT0_RGTX_INV_MASK 0x40 -#define RTL8367C_EXT0_RGRX_INV_OFFSET 5 -#define RTL8367C_EXT0_RGRX_INV_MASK 0x20 -#define RTL8367C_EXT0_RGMXF_OFFSET 0 -#define RTL8367C_EXT0_RGMXF_MASK 0x1F - -#define RTL8367C_REG_EXT1_RGMXF 0x1307 -#define RTL8367C_EXT1_RGTX_INV_OFFSET 6 -#define RTL8367C_EXT1_RGTX_INV_MASK 0x40 -#define RTL8367C_EXT1_RGRX_INV_OFFSET 5 -#define RTL8367C_EXT1_RGRX_INV_MASK 0x20 -#define RTL8367C_EXT1_RGMXF_OFFSET 0 -#define RTL8367C_EXT1_RGMXF_MASK 0x1F - -#define RTL8367C_REG_BISR_CTRL 0x1308 -#define RTL8367C_BISR_CTRL_OFFSET 0 -#define RTL8367C_BISR_CTRL_MASK 0x7 - -#define RTL8367C_REG_SLF_IF 0x1309 -#define RTL8367C_LINK_DOWN_CLR_FIFO_OFFSET 7 -#define RTL8367C_LINK_DOWN_CLR_FIFO_MASK 0x80 -#define RTL8367C_LOOPBACK_OFFSET 6 -#define RTL8367C_LOOPBACK_MASK 0x40 -#define RTL8367C_WATER_LEVEL_OFFSET 4 -#define RTL8367C_WATER_LEVEL_MASK 0x30 -#define RTL8367C_SLF_IF_OFFSET 0 -#define RTL8367C_SLF_IF_MASK 0x3 - -#define RTL8367C_REG_I2C_CLOCK_DIV 0x130a -#define RTL8367C_I2C_CLOCK_DIV_OFFSET 0 -#define RTL8367C_I2C_CLOCK_DIV_MASK 0x3FF - -#define RTL8367C_REG_MDX_MDC_DIV 0x130b -#define RTL8367C_MDX_MDC_DIV_OFFSET 0 -#define RTL8367C_MDX_MDC_DIV_MASK 0x3FF - -#define RTL8367C_REG_MISCELLANEOUS_CONFIGURE0 0x130c -#define RTL8367C_ADCCKI_FROM_PAD_OFFSET 14 -#define RTL8367C_ADCCKI_FROM_PAD_MASK 0x4000 -#define RTL8367C_ADCCKI_EN_OFFSET 13 -#define RTL8367C_ADCCKI_EN_MASK 0x2000 -#define RTL8367C_FLASH_ENABLE_OFFSET 12 -#define RTL8367C_FLASH_ENABLE_MASK 0x1000 -#define RTL8367C_EEE_ENABLE_OFFSET 11 -#define RTL8367C_EEE_ENABLE_MASK 0x800 -#define RTL8367C_NIC_ENABLE_OFFSET 10 -#define RTL8367C_NIC_ENABLE_MASK 0x400 -#define RTL8367C_FT_ENABLE_OFFSET 9 -#define RTL8367C_FT_ENABLE_MASK 0x200 -#define RTL8367C_OLT_ENABLE_OFFSET 8 -#define RTL8367C_OLT_ENABLE_MASK 0x100 -#define RTL8367C_RTCT_EN_OFFSET 7 -#define RTL8367C_RTCT_EN_MASK 0x80 -#define RTL8367C_PON_LIGHT_EN_OFFSET 6 -#define RTL8367C_PON_LIGHT_EN_MASK 0x40 -#define RTL8367C_DW8051_EN_OFFSET 5 -#define RTL8367C_DW8051_EN_MASK 0x20 -#define RTL8367C_AUTOLOAD_EN_OFFSET 4 -#define RTL8367C_AUTOLOAD_EN_MASK 0x10 -#define RTL8367C_NRESTORE_EN_OFFSET 3 -#define RTL8367C_NRESTORE_EN_MASK 0x8 -#define RTL8367C_DIS_PON_TABLE_INIT_OFFSET 2 -#define RTL8367C_DIS_PON_TABLE_INIT_MASK 0x4 -#define RTL8367C_DIS_PON_BIST_OFFSET 1 -#define RTL8367C_DIS_PON_BIST_MASK 0x2 -#define RTL8367C_EFUSE_EN_OFFSET 0 -#define RTL8367C_EFUSE_EN_MASK 0x1 - -#define RTL8367C_REG_MISCELLANEOUS_CONFIGURE1 0x130d -#define RTL8367C_EEPROM_DEV_ADR_OFFSET 8 -#define RTL8367C_EEPROM_DEV_ADR_MASK 0x7F00 -#define RTL8367C_EEPROM_MSB_OFFSET 7 -#define RTL8367C_EEPROM_MSB_MASK 0x80 -#define RTL8367C_EEPROM_ADDRESS_16B_OFFSET 6 -#define RTL8367C_EEPROM_ADDRESS_16B_MASK 0x40 -#define RTL8367C_EEPROM_DWONLOAD_COMPLETE_OFFSET 3 -#define RTL8367C_EEPROM_DWONLOAD_COMPLETE_MASK 0x8 -#define RTL8367C_SPI_SLAVE_EN_OFFSET 2 -#define RTL8367C_SPI_SLAVE_EN_MASK 0x4 -#define RTL8367C_SMI_SEL_OFFSET 0 -#define RTL8367C_SMI_SEL_MASK 0x3 - -#define RTL8367C_REG_PHY_AD 0x130f -#define RTL8367C_EN_PHY_MAX_POWER_OFFSET 14 -#define RTL8367C_EN_PHY_MAX_POWER_MASK 0x4000 -#define RTL8367C_EN_PHY_SEL_DEG_OFFSET 13 -#define RTL8367C_EN_PHY_SEL_DEG_MASK 0x2000 -#define RTL8367C_EXTPHY_AD_OFFSET 8 -#define RTL8367C_EXTPHY_AD_MASK 0x1F00 -#define RTL8367C_EN_PHY_LOW_POWER_MODE_OFFSET 7 -#define RTL8367C_EN_PHY_LOW_POWER_MODE_MASK 0x80 -#define RTL8367C_EN_PHY_GREEN_OFFSET 6 -#define RTL8367C_EN_PHY_GREEN_MASK 0x40 -#define RTL8367C_PDNPHY_OFFSET 5 -#define RTL8367C_PDNPHY_MASK 0x20 -#define RTL8367C_INTPHY_AD_OFFSET 0 -#define RTL8367C_INTPHY_AD_MASK 0x1F - -#define RTL8367C_REG_DIGITAL_INTERFACE0_FORCE 0x1310 -#define RTL8367C_GMII_0_FORCE_OFFSET 12 -#define RTL8367C_GMII_0_FORCE_MASK 0x1000 -#define RTL8367C_RGMII_0_FORCE_OFFSET 0 -#define RTL8367C_RGMII_0_FORCE_MASK 0xFFF - -#define RTL8367C_REG_DIGITAL_INTERFACE1_FORCE 0x1311 -#define RTL8367C_GMII_1_FORCE_OFFSET 12 -#define RTL8367C_GMII_1_FORCE_MASK 0x1000 -#define RTL8367C_RGMII_1_FORCE_OFFSET 0 -#define RTL8367C_RGMII_1_FORCE_MASK 0xFFF - -#define RTL8367C_REG_MAC0_FORCE_SELECT 0x1312 -#define RTL8367C_EN_MAC0_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC0_FORCE_MASK 0x1000 -#define RTL8367C_MAC0_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC0_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC1_FORCE_SELECT 0x1313 -#define RTL8367C_EN_MAC1_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC1_FORCE_MASK 0x1000 -#define RTL8367C_MAC1_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC1_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC2_FORCE_SELECT 0x1314 -#define RTL8367C_EN_MAC2_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC2_FORCE_MASK 0x1000 -#define RTL8367C_MAC2_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC2_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC3_FORCE_SELECT 0x1315 -#define RTL8367C_EN_MAC3_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC3_FORCE_MASK 0x1000 -#define RTL8367C_MAC3_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC3_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC4_FORCE_SELECT 0x1316 -#define RTL8367C_EN_MAC4_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC4_FORCE_MASK 0x1000 -#define RTL8367C_MAC4_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC4_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC5_FORCE_SELECT 0x1317 -#define RTL8367C_EN_MAC5_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC5_FORCE_MASK 0x1000 -#define RTL8367C_MAC5_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC5_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC6_FORCE_SELECT 0x1318 -#define RTL8367C_EN_MAC6_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC6_FORCE_MASK 0x1000 -#define RTL8367C_MAC6_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC6_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_MAC7_FORCE_SELECT 0x1319 -#define RTL8367C_EN_MAC7_FORCE_OFFSET 12 -#define RTL8367C_EN_MAC7_FORCE_MASK 0x1000 -#define RTL8367C_MAC7_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_MAC7_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_M10_FORCE_SELECT 0x131c -#define RTL8367C_EN_M10_FORCE_OFFSET 12 -#define RTL8367C_EN_M10_FORCE_MASK 0x1000 -#define RTL8367C_M10_FORCE_ABLTY_OFFSET 0 -#define RTL8367C_M10_FORCE_ABLTY_MASK 0xFFF - -#define RTL8367C_REG_CHIP_RESET 0x1322 -#define RTL8367C_GPHY_RESET_OFFSET 6 -#define RTL8367C_GPHY_RESET_MASK 0x40 -#define RTL8367C_NIC_RST_OFFSET 5 -#define RTL8367C_NIC_RST_MASK 0x20 -#define RTL8367C_DW8051_RST_OFFSET 4 -#define RTL8367C_DW8051_RST_MASK 0x10 -#define RTL8367C_SDS_RST_OFFSET 3 -#define RTL8367C_SDS_RST_MASK 0x8 -#define RTL8367C_CONFIG_RST_OFFSET 2 -#define RTL8367C_CONFIG_RST_MASK 0x4 -#define RTL8367C_SW_RST_OFFSET 1 -#define RTL8367C_SW_RST_MASK 0x2 -#define RTL8367C_CHIP_RST_OFFSET 0 -#define RTL8367C_CHIP_RST_MASK 0x1 - -#define RTL8367C_REG_DIGITAL_DEBUG_0 0x1323 - -#define RTL8367C_REG_DIGITAL_DEBUG_1 0x1324 - -#define RTL8367C_REG_INTERNAL_PHY_MDC_DRIVER 0x1325 -#define RTL8367C_INTERNAL_PHY_MDC_DRIVER_OFFSET 0 -#define RTL8367C_INTERNAL_PHY_MDC_DRIVER_MASK 0x3FF - -#define RTL8367C_REG_LINKDOWN_TIME_CTRL 0x1326 -#define RTL8367C_LINKDOWN_TIME_CFG_OFFSET 9 -#define RTL8367C_LINKDOWN_TIME_CFG_MASK 0x7E00 -#define RTL8367C_LINKDOWN_TIME_ENABLE_OFFSET 8 -#define RTL8367C_LINKDOWN_TIME_ENABLE_MASK 0x100 -#define RTL8367C_LINKDOWN_TIME_OFFSET 0 -#define RTL8367C_LINKDOWN_TIME_MASK 0xFF - -#define RTL8367C_REG_PHYACK_TIMEOUT 0x1331 - -#define RTL8367C_REG_MDXACK_TIMEOUT 0x1333 - -#define RTL8367C_REG_DW8051_RDY 0x1336 -#define RTL8367C_VIAROM_WRITE_EN_OFFSET 9 -#define RTL8367C_VIAROM_WRITE_EN_MASK 0x200 -#define RTL8367C_SPIF_CK2_OFFSET 8 -#define RTL8367C_SPIF_CK2_MASK 0x100 -#define RTL8367C_RRCP_MDOE_OFFSET 7 -#define RTL8367C_RRCP_MDOE_MASK 0x80 -#define RTL8367C_DW8051_RATE_OFFSET 4 -#define RTL8367C_DW8051_RATE_MASK 0x70 -#define RTL8367C_IROM_MSB_OFFSET 2 -#define RTL8367C_IROM_MSB_MASK 0xC -#define RTL8367C_ACS_IROM_ENABLE_OFFSET 1 -#define RTL8367C_ACS_IROM_ENABLE_MASK 0x2 -#define RTL8367C_DW8051_READY_OFFSET 0 -#define RTL8367C_DW8051_READY_MASK 0x1 - -#define RTL8367C_REG_BIST_CTRL 0x133c -#define RTL8367C_DRF_BIST_DONE_ALL_OFFSET 5 -#define RTL8367C_DRF_BIST_DONE_ALL_MASK 0x20 -#define RTL8367C_DRF_BIST_PAUSE_ALL_OFFSET 4 -#define RTL8367C_DRF_BIST_PAUSE_ALL_MASK 0x10 -#define RTL8367C_BIST_DOAN_ALL_OFFSET 3 -#define RTL8367C_BIST_DOAN_ALL_MASK 0x8 -#define RTL8367C_BIST_PASS_OFFSET 0 -#define RTL8367C_BIST_PASS_MASK 0x7 - -#define RTL8367C_REG_DIAG_MODE2 0x133d -#define RTL8367C_DIAG_MODE2_ACTRAM_OFFSET 1 -#define RTL8367C_DIAG_MODE2_ACTRAM_MASK 0x2 -#define RTL8367C_DIAG_MODE2_BCAM_ACTION_OFFSET 0 -#define RTL8367C_DIAG_MODE2_BCAM_ACTION_MASK 0x1 - -#define RTL8367C_REG_MDX_PHY_REG0 0x133e -#define RTL8367C_PHY_BRD_MASK_OFFSET 4 -#define RTL8367C_PHY_BRD_MASK_MASK 0x1F0 -#define RTL8367C_MDX_INDACC_PAGE_OFFSET 0 -#define RTL8367C_MDX_INDACC_PAGE_MASK 0xF - -#define RTL8367C_REG_MDX_PHY_REG1 0x133f -#define RTL8367C_PHY_BRD_MODE_OFFSET 5 -#define RTL8367C_PHY_BRD_MODE_MASK 0x20 -#define RTL8367C_BRD_PHYAD_OFFSET 0 -#define RTL8367C_BRD_PHYAD_MASK 0x1F - -#define RTL8367C_REG_DEBUG_SIGNAL_SELECT_SW 0x1340 - -#define RTL8367C_REG_DEBUG_SIGNAL_SELECT_B 0x1341 -#define RTL8367C_DEBUG_MX_OFFSET 9 -#define RTL8367C_DEBUG_MX_MASK 0xE00 -#define RTL8367C_DEBUG_SHIFT_MISC_OFFSET 6 -#define RTL8367C_DEBUG_SHIFT_MISC_MASK 0x1C0 -#define RTL8367C_DEBUG_SHIFT_SW_OFFSET 3 -#define RTL8367C_DEBUG_SHIFT_SW_MASK 0x38 -#define RTL8367C_DEBUG_SHIFT_GPHY_OFFSET 0 -#define RTL8367C_DEBUG_SHIFT_GPHY_MASK 0x7 - -#define RTL8367C_REG_DEBUG_SIGNAL_I 0x1343 - -#define RTL8367C_REG_DEBUG_SIGNAL_H 0x1344 - -#define RTL8367C_REG_DBGO_SEL_GPHY 0x1345 - -#define RTL8367C_REG_DBGO_SEL_MISC 0x1346 - -#define RTL8367C_REG_BYPASS_ABLTY_LOCK 0x1349 -#define RTL8367C_BYPASS_ABLTY_LOCK_OFFSET 0 -#define RTL8367C_BYPASS_ABLTY_LOCK_MASK 0xFF - -#define RTL8367C_REG_BYPASS_ABLTY_LOCK_EXT 0x134a -#define RTL8367C_BYPASS_P10_ABILIITY_LOCK_OFFSET 3 -#define RTL8367C_BYPASS_P10_ABILIITY_LOCK_MASK 0x8 -#define RTL8367C_BYPASS_EXT_ABILITY_LOCK_OFFSET 0 -#define RTL8367C_BYPASS_EXT_ABILITY_LOCK_MASK 0x7 - -#define RTL8367C_REG_ACL_GPIO 0x134f -#define RTL8367C_ACL_GPIO_13_OFFSET 13 -#define RTL8367C_ACL_GPIO_13_MASK 0x2000 -#define RTL8367C_ACL_GPIO_12_OFFSET 12 -#define RTL8367C_ACL_GPIO_12_MASK 0x1000 -#define RTL8367C_ACL_GPIO_11_OFFSET 11 -#define RTL8367C_ACL_GPIO_11_MASK 0x800 -#define RTL8367C_ACL_GPIO_10_OFFSET 10 -#define RTL8367C_ACL_GPIO_10_MASK 0x400 -#define RTL8367C_ACL_GPIO_9_OFFSET 9 -#define RTL8367C_ACL_GPIO_9_MASK 0x200 -#define RTL8367C_ACL_GPIO_8_OFFSET 8 -#define RTL8367C_ACL_GPIO_8_MASK 0x100 -#define RTL8367C_ACL_GPIO_7_OFFSET 7 -#define RTL8367C_ACL_GPIO_7_MASK 0x80 -#define RTL8367C_ACL_GPIO_6_OFFSET 6 -#define RTL8367C_ACL_GPIO_6_MASK 0x40 -#define RTL8367C_ACL_GPIO_5_OFFSET 5 -#define RTL8367C_ACL_GPIO_5_MASK 0x20 -#define RTL8367C_ACL_GPIO_4_OFFSET 4 -#define RTL8367C_ACL_GPIO_4_MASK 0x10 -#define RTL8367C_ACL_GPIO_3_OFFSET 3 -#define RTL8367C_ACL_GPIO_3_MASK 0x8 -#define RTL8367C_ACL_GPIO_2_OFFSET 2 -#define RTL8367C_ACL_GPIO_2_MASK 0x4 -#define RTL8367C_ACL_GPIO_1_OFFSET 1 -#define RTL8367C_ACL_GPIO_1_MASK 0x2 -#define RTL8367C_ACL_GPIO_0_OFFSET 0 -#define RTL8367C_ACL_GPIO_0_MASK 0x1 - -#define RTL8367C_REG_EN_GPIO 0x1350 -#define RTL8367C_EN_GPIO_13_OFFSET 13 -#define RTL8367C_EN_GPIO_13_MASK 0x2000 -#define RTL8367C_EN_GPIO_12_OFFSET 12 -#define RTL8367C_EN_GPIO_12_MASK 0x1000 -#define RTL8367C_EN_GPIO_11_OFFSET 11 -#define RTL8367C_EN_GPIO_11_MASK 0x800 -#define RTL8367C_EN_GPIO_10_OFFSET 10 -#define RTL8367C_EN_GPIO_10_MASK 0x400 -#define RTL8367C_EN_GPIO_9_OFFSET 9 -#define RTL8367C_EN_GPIO_9_MASK 0x200 -#define RTL8367C_EN_GPIO_8_OFFSET 8 -#define RTL8367C_EN_GPIO_8_MASK 0x100 -#define RTL8367C_EN_GPIO_7_OFFSET 7 -#define RTL8367C_EN_GPIO_7_MASK 0x80 -#define RTL8367C_EN_GPIO_6_OFFSET 6 -#define RTL8367C_EN_GPIO_6_MASK 0x40 -#define RTL8367C_EN_GPIO_5_OFFSET 5 -#define RTL8367C_EN_GPIO_5_MASK 0x20 -#define RTL8367C_EN_GPIO_4_OFFSET 4 -#define RTL8367C_EN_GPIO_4_MASK 0x10 -#define RTL8367C_EN_GPIO_3_OFFSET 3 -#define RTL8367C_EN_GPIO_3_MASK 0x8 -#define RTL8367C_EN_GPIO_2_OFFSET 2 -#define RTL8367C_EN_GPIO_2_MASK 0x4 -#define RTL8367C_EN_GPIO_1_OFFSET 1 -#define RTL8367C_EN_GPIO_1_MASK 0x2 -#define RTL8367C_EN_GPIO_0_OFFSET 0 -#define RTL8367C_EN_GPIO_0_MASK 0x1 - -#define RTL8367C_REG_CFG_MULTI_PIN 0x1351 -#define RTL8367C_CFG_MULTI_PIN_OFFSET 0 -#define RTL8367C_CFG_MULTI_PIN_MASK 0x3 - -#define RTL8367C_REG_PORT0_STATUS 0x1352 -#define RTL8367C_PORT0_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT0_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT0_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT0_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT0_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT0_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT0_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT0_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT0_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT0_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT0_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT0_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT0_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT0_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT0_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT0_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT0_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT0_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT0_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT0_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT1_STATUS 0x1353 -#define RTL8367C_PORT1_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT1_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT1_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT1_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT1_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT1_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT1_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT1_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT1_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT1_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT1_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT1_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT1_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT1_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT1_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT1_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT1_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT1_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT1_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT1_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT2_STATUS 0x1354 -#define RTL8367C_PORT2_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT2_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT2_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT2_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT2_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT2_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT2_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT2_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT2_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT2_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT2_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT2_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT2_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT2_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT2_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT2_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT2_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT2_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT2_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT2_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT3_STATUS 0x1355 -#define RTL8367C_PORT3_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT3_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT3_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT3_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT3_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT3_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT3_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT3_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT3_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT3_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT3_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT3_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT3_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT3_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT3_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT3_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT3_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT3_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT3_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT3_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT4_STATUS 0x1356 -#define RTL8367C_PORT4_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT4_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT4_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT4_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT4_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT4_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT4_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT4_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT4_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT4_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT4_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT4_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT4_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT4_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT4_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT4_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT4_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT4_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT4_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT4_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT5_STATUS 0x1357 -#define RTL8367C_PORT5_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT5_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT5_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT5_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT5_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT5_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT5_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT5_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT5_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT5_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT5_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT5_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT5_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT5_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT5_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT5_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT5_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT5_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT5_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT5_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT6_STATUS 0x1358 -#define RTL8367C_PORT6_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT6_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT6_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT6_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT6_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT6_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT6_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT6_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT6_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT6_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT6_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT6_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT6_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT6_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT6_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT6_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT6_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT6_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT6_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT6_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT7_STATUS 0x1359 -#define RTL8367C_PORT7_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT7_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT7_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT7_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT7_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT7_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT7_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT7_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT7_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT7_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT7_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT7_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT7_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT7_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT7_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT7_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT7_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT7_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT7_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT7_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT8_STATUS 0x135a -#define RTL8367C_PORT8_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT8_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT8_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT8_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT8_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT8_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT8_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT8_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT8_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT8_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT8_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT8_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT8_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT8_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT8_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT8_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT8_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT8_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT8_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT8_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT9_STATUS 0x135b -#define RTL8367C_PORT9_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT9_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT9_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT9_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT9_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT9_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT9_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT9_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT9_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT9_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT9_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT9_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT9_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT9_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT9_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT9_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT9_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT9_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT9_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT9_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_PORT10_STATUS 0x135c -#define RTL8367C_PORT10_STATUS_EN_1000_LPI_OFFSET 11 -#define RTL8367C_PORT10_STATUS_EN_1000_LPI_MASK 0x800 -#define RTL8367C_PORT10_STATUS_EN_100_LPI_OFFSET 10 -#define RTL8367C_PORT10_STATUS_EN_100_LPI_MASK 0x400 -#define RTL8367C_PORT10_STATUS_NWAY_FAULT_OFFSET 9 -#define RTL8367C_PORT10_STATUS_NWAY_FAULT_MASK 0x200 -#define RTL8367C_PORT10_STATUS_LINK_ON_MASTER_OFFSET 8 -#define RTL8367C_PORT10_STATUS_LINK_ON_MASTER_MASK 0x100 -#define RTL8367C_PORT10_STATUS_NWAY_CAP_OFFSET 7 -#define RTL8367C_PORT10_STATUS_NWAY_CAP_MASK 0x80 -#define RTL8367C_PORT10_STATUS_TX_FLOWCTRL_CAP_OFFSET 6 -#define RTL8367C_PORT10_STATUS_TX_FLOWCTRL_CAP_MASK 0x40 -#define RTL8367C_PORT10_STATUS_RX_FLOWCTRL_CAP_OFFSET 5 -#define RTL8367C_PORT10_STATUS_RX_FLOWCTRL_CAP_MASK 0x20 -#define RTL8367C_PORT10_STATUS_LINK_STATE_OFFSET 4 -#define RTL8367C_PORT10_STATUS_LINK_STATE_MASK 0x10 -#define RTL8367C_PORT10_STATUS_FULL_DUPLUX_CAP_OFFSET 2 -#define RTL8367C_PORT10_STATUS_FULL_DUPLUX_CAP_MASK 0x4 -#define RTL8367C_PORT10_STATUS_LINK_SPEED_OFFSET 0 -#define RTL8367C_PORT10_STATUS_LINK_SPEED_MASK 0x3 - -#define RTL8367C_REG_UPS_CTRL0 0x1362 -#define RTL8367C_P3_REF_SD_BIT0_OFFSET 8 -#define RTL8367C_P3_REF_SD_BIT0_MASK 0xFF00 -#define RTL8367C_P2_REF_SD_OFFSET 0 -#define RTL8367C_P2_REF_SD_MASK 0xFF - -#define RTL8367C_REG_UPS_CTRL1 0x1363 -#define RTL8367C_UPS_OUT_OFFSET 8 -#define RTL8367C_UPS_OUT_MASK 0xFF00 -#define RTL8367C_UPS_WRITE_PULSE_OFFSET 1 -#define RTL8367C_UPS_WRITE_PULSE_MASK 0x2 -#define RTL8367C_UPS_EN_OFFSET 0 -#define RTL8367C_UPS_EN_MASK 0x1 - -#define RTL8367C_REG_UPS_CTRL2 0x1364 -#define RTL8367C_IGNOE_MAC8_LINK_OFFSET 15 -#define RTL8367C_IGNOE_MAC8_LINK_MASK 0x8000 -#define RTL8367C_AGREE_SLEEP_OFFSET 14 -#define RTL8367C_AGREE_SLEEP_MASK 0x4000 -#define RTL8367C_WAIT_FOR_AGREEMENT_OFFSET 13 -#define RTL8367C_WAIT_FOR_AGREEMENT_MASK 0x2000 -#define RTL8367C_WAKE_UP_BY_LINK_OFFSET 12 -#define RTL8367C_WAKE_UP_BY_LINK_MASK 0x1000 -#define RTL8367C_WAKE_UP_BY_PHY_OFFSET 11 -#define RTL8367C_WAKE_UP_BY_PHY_MASK 0x800 -#define RTL8367C_SLOW_CLK_TGL_RATE_OFFSET 7 -#define RTL8367C_SLOW_CLK_TGL_RATE_MASK 0x780 -#define RTL8367C_PLL_G1_CTRL_EN_OFFSET 6 -#define RTL8367C_PLL_G1_CTRL_EN_MASK 0x40 -#define RTL8367C_PLL_G0_CTRL_EN_OFFSET 5 -#define RTL8367C_PLL_G0_CTRL_EN_MASK 0x20 -#define RTL8367C_SLOW_DOWN_PLL_EN_OFFSET 4 -#define RTL8367C_SLOW_DOWN_PLL_EN_MASK 0x10 -#define RTL8367C_SLOW_DOWN_CLK_EN_OFFSET 3 -#define RTL8367C_SLOW_DOWN_CLK_EN_MASK 0x8 -#define RTL8367C_GATING_CLK_SDS_EN_OFFSET 2 -#define RTL8367C_GATING_CLK_SDS_EN_MASK 0x4 -#define RTL8367C_GATING_CLK_CHIP_EN_OFFSET 1 -#define RTL8367C_GATING_CLK_CHIP_EN_MASK 0x2 -#define RTL8367C_GATING_SW_EN_OFFSET 0 -#define RTL8367C_GATING_SW_EN_MASK 0x1 - -#define RTL8367C_REG_GATING_CLK_1 0x1365 -#define RTL8367C_ALDPS_MODE_4_OFFSET 15 -#define RTL8367C_ALDPS_MODE_4_MASK 0x8000 -#define RTL8367C_ALDPS_MODE_3_OFFSET 14 -#define RTL8367C_ALDPS_MODE_3_MASK 0x4000 -#define RTL8367C_ALDPS_MODE_2_OFFSET 13 -#define RTL8367C_ALDPS_MODE_2_MASK 0x2000 -#define RTL8367C_ALDPS_MODE_1_OFFSET 12 -#define RTL8367C_ALDPS_MODE_1_MASK 0x1000 -#define RTL8367C_ALDPS_MODE_0_OFFSET 11 -#define RTL8367C_ALDPS_MODE_0_MASK 0x800 -#define RTL8367C_UPS_DBGO_OFFSET 10 -#define RTL8367C_UPS_DBGO_MASK 0x400 -#define RTL8367C_IFMX_AFF_NOT_FF_OUT_OFFSET 9 -#define RTL8367C_IFMX_AFF_NOT_FF_OUT_MASK 0x200 -#define RTL8367C_WATER_LEVEL_FD_OFFSET 6 -#define RTL8367C_WATER_LEVEL_FD_MASK 0x1C0 -#define RTL8367C_WATER_LEVEL_Y2X_OFFSET 3 -#define RTL8367C_WATER_LEVEL_Y2X_MASK 0x38 -#define RTL8367C_WATER_LEVEL_X2Y_2_OFFSET 2 -#define RTL8367C_WATER_LEVEL_X2Y_2_MASK 0x4 -#define RTL8367C_IGNOE_MAC10_LINK_OFFSET 1 -#define RTL8367C_IGNOE_MAC10_LINK_MASK 0x2 -#define RTL8367C_IGNOE_MAC9_LINK_OFFSET 0 -#define RTL8367C_IGNOE_MAC9_LINK_MASK 0x1 - -#define RTL8367C_REG_UPS_CTRL4 0x1366 -#define RTL8367C_PROB_EN_OFFSET 6 -#define RTL8367C_PROB_EN_MASK 0x40 -#define RTL8367C_PLL_DOWN_OFFSET 1 -#define RTL8367C_PLL_DOWN_MASK 0x2 -#define RTL8367C_XTAL_DOWN_OFFSET 0 -#define RTL8367C_XTAL_DOWN_MASK 0x1 - -#define RTL8367C_REG_UPS_CTRL5 0x1367 -#define RTL8367C_FRC_CPU_ACPT_OFFSET 3 -#define RTL8367C_FRC_CPU_ACPT_MASK 0x8 -#define RTL8367C_UPS_CPU_ACPT_OFFSET 2 -#define RTL8367C_UPS_CPU_ACPT_MASK 0x4 -#define RTL8367C_UPS_DBG_4_OFFSET 0 -#define RTL8367C_UPS_DBG_4_MASK 0x3 - -#define RTL8367C_REG_UPS_CTRL6 0x1368 -#define RTL8367C_UPS_CTRL6_OFFSET 0 -#define RTL8367C_UPS_CTRL6_MASK 0xF - -#define RTL8367C_REG_EFUSE_CMD_70B 0x1369 - -#define RTL8367C_REG_EFUSE_CMD 0x1370 -#define RTL8367C_EFUSE_TIME_OUT_FLAG_OFFSET 3 -#define RTL8367C_EFUSE_TIME_OUT_FLAG_MASK 0x8 -#define RTL8367C_EFUSE_ACCESS_BUSY_OFFSET 2 -#define RTL8367C_EFUSE_ACCESS_BUSY_MASK 0x4 -#define RTL8367C_EFUSE_COMMAND_EN_OFFSET 1 -#define RTL8367C_EFUSE_COMMAND_EN_MASK 0x2 -#define RTL8367C_EFUSE_WR_OFFSET 0 -#define RTL8367C_EFUSE_WR_MASK 0x1 - -#define RTL8367C_REG_EFUSE_ADR 0x1371 -#define RTL8367C_DUMMY_15_10_OFFSET 8 -#define RTL8367C_DUMMY_15_10_MASK 0xFF00 -#define RTL8367C_EFUSE_ADDRESS_OFFSET 0 -#define RTL8367C_EFUSE_ADDRESS_MASK 0xFF - -#define RTL8367C_REG_EFUSE_WDAT 0x1372 - -#define RTL8367C_REG_EFUSE_RDAT 0x1373 - -#define RTL8367C_REG_I2C_CTRL 0x1374 -#define RTL8367C_MDX_MST_FAIL_LAT_OFFSET 1 -#define RTL8367C_MDX_MST_FAIL_LAT_MASK 0x2 -#define RTL8367C_MDX_MST_FAIL_CLRPS_OFFSET 0 -#define RTL8367C_MDX_MST_FAIL_CLRPS_MASK 0x1 - -#define RTL8367C_REG_EEE_CFG 0x1375 -#define RTL8367C_CFG_BYPASS_GATELPTD_OFFSET 11 -#define RTL8367C_CFG_BYPASS_GATELPTD_MASK 0x800 -#define RTL8367C_EEE_ABT_ADDR2_OFFSET 6 -#define RTL8367C_EEE_ABT_ADDR2_MASK 0x7C0 -#define RTL8367C_EEE_ABT_ADDR1_OFFSET 1 -#define RTL8367C_EEE_ABT_ADDR1_MASK 0x3E -#define RTL8367C_EEE_POLL_EN_OFFSET 0 -#define RTL8367C_EEE_POLL_EN_MASK 0x1 - -#define RTL8367C_REG_EEE_PAGE 0x1376 - -#define RTL8367C_REG_EEE_EXT_PAGE 0x1377 - -#define RTL8367C_REG_EEE_EN_SPD1000 0x1378 - -#define RTL8367C_REG_EEE_EN_SPD100 0x1379 - -#define RTL8367C_REG_EEE_LP_SPD1000 0x137a - -#define RTL8367C_REG_EEE_LP_SPD100 0x137b - -#define RTL8367C_REG_DW8051_PRO_REG0 0x13a0 - -#define RTL8367C_REG_DW8051_PRO_REG1 0x13a1 - -#define RTL8367C_REG_DW8051_PRO_REG2 0x13a2 - -#define RTL8367C_REG_DW8051_PRO_REG3 0x13a3 - -#define RTL8367C_REG_DW8051_PRO_REG4 0x13a4 - -#define RTL8367C_REG_DW8051_PRO_REG5 0x13a5 - -#define RTL8367C_REG_DW8051_PRO_REG6 0x13a6 - -#define RTL8367C_REG_DW8051_PRO_REG7 0x13a7 - -#define RTL8367C_REG_PROTECT_ID 0x13c0 - -#define RTL8367C_REG_CHIP_VER_INTL 0x13c1 -#define RTL8367C_CHIP_VER_INTL_OFFSET 0 -#define RTL8367C_CHIP_VER_INTL_MASK 0xF - -#define RTL8367C_REG_MAGIC_ID 0x13c2 - -#define RTL8367C_REG_DIGITAL_INTERFACE_SELECT_1 0x13c3 -#define RTL8367C_SKIP_MII_2_RXER_OFFSET 4 -#define RTL8367C_SKIP_MII_2_RXER_MASK 0x10 -#define RTL8367C_SELECT_GMII_2_OFFSET 0 -#define RTL8367C_SELECT_GMII_2_MASK 0xF - -#define RTL8367C_REG_DIGITAL_INTERFACE2_FORCE 0x13c4 -#define RTL8367C_GMII_2_FORCE_OFFSET 12 -#define RTL8367C_GMII_2_FORCE_MASK 0x1000 -#define RTL8367C_RGMII_2_FORCE_OFFSET 0 -#define RTL8367C_RGMII_2_FORCE_MASK 0xFFF - -#define RTL8367C_REG_EXT2_RGMXF 0x13c5 -#define RTL8367C_EXT2_RGTX_INV_OFFSET 6 -#define RTL8367C_EXT2_RGTX_INV_MASK 0x40 -#define RTL8367C_EXT2_RGRX_INV_OFFSET 5 -#define RTL8367C_EXT2_RGRX_INV_MASK 0x20 -#define RTL8367C_EXT2_RGMXF_OFFSET 0 -#define RTL8367C_EXT2_RGMXF_MASK 0x1F - -#define RTL8367C_REG_ROUTER_UPS_CFG 0x13c6 -#define RTL8367C_UPS_Status_OFFSET 1 -#define RTL8367C_UPS_Status_MASK 0x2 -#define RTL8367C_SoftStart_OFFSET 0 -#define RTL8367C_SoftStart_MASK 0x1 - -#define RTL8367C_REG_CTRL_GPIO 0x13c7 -#define RTL8367C_CTRL_GPIO_13_OFFSET 13 -#define RTL8367C_CTRL_GPIO_13_MASK 0x2000 -#define RTL8367C_CTRL_GPIO_12_OFFSET 12 -#define RTL8367C_CTRL_GPIO_12_MASK 0x1000 -#define RTL8367C_CTRL_GPIO_11_OFFSET 11 -#define RTL8367C_CTRL_GPIO_11_MASK 0x800 -#define RTL8367C_CTRL_GPIO_10_OFFSET 10 -#define RTL8367C_CTRL_GPIO_10_MASK 0x400 -#define RTL8367C_CTRL_GPIO_9_OFFSET 9 -#define RTL8367C_CTRL_GPIO_9_MASK 0x200 -#define RTL8367C_CTRL_GPIO_8_OFFSET 8 -#define RTL8367C_CTRL_GPIO_8_MASK 0x100 -#define RTL8367C_CTRL_GPIO_7_OFFSET 7 -#define RTL8367C_CTRL_GPIO_7_MASK 0x80 -#define RTL8367C_CTRL_GPIO_6_OFFSET 6 -#define RTL8367C_CTRL_GPIO_6_MASK 0x40 -#define RTL8367C_CTRL_GPIO_5_OFFSET 5 -#define RTL8367C_CTRL_GPIO_5_MASK 0x20 -#define RTL8367C_CTRL_GPIO_4_OFFSET 4 -#define RTL8367C_CTRL_GPIO_4_MASK 0x10 -#define RTL8367C_CTRL_GPIO_3_OFFSET 3 -#define RTL8367C_CTRL_GPIO_3_MASK 0x8 -#define RTL8367C_CTRL_GPIO_2_OFFSET 2 -#define RTL8367C_CTRL_GPIO_2_MASK 0x4 -#define RTL8367C_CTRL_GPIO_1_OFFSET 1 -#define RTL8367C_CTRL_GPIO_1_MASK 0x2 -#define RTL8367C_CTRL_GPIO_0_OFFSET 0 -#define RTL8367C_CTRL_GPIO_0_MASK 0x1 - -#define RTL8367C_REG_SEL_GPIO 0x13c8 -#define RTL8367C_SEL_GPIO_13_OFFSET 13 -#define RTL8367C_SEL_GPIO_13_MASK 0x2000 -#define RTL8367C_SEL_GPIO_12_OFFSET 12 -#define RTL8367C_SEL_GPIO_12_MASK 0x1000 -#define RTL8367C_SEL_GPIO_11_OFFSET 11 -#define RTL8367C_SEL_GPIO_11_MASK 0x800 -#define RTL8367C_SEL_GPIO_10_OFFSET 10 -#define RTL8367C_SEL_GPIO_10_MASK 0x400 -#define RTL8367C_SEL_GPIO_9_OFFSET 9 -#define RTL8367C_SEL_GPIO_9_MASK 0x200 -#define RTL8367C_SEL_GPIO_8_OFFSET 8 -#define RTL8367C_SEL_GPIO_8_MASK 0x100 -#define RTL8367C_SEL_GPIO_7_OFFSET 7 -#define RTL8367C_SEL_GPIO_7_MASK 0x80 -#define RTL8367C_SEL_GPIO_6_OFFSET 6 -#define RTL8367C_SEL_GPIO_6_MASK 0x40 -#define RTL8367C_SEL_GPIO_5_OFFSET 5 -#define RTL8367C_SEL_GPIO_5_MASK 0x20 -#define RTL8367C_SEL_GPIO_4_OFFSET 4 -#define RTL8367C_SEL_GPIO_4_MASK 0x10 -#define RTL8367C_SEL_GPIO_3_OFFSET 3 -#define RTL8367C_SEL_GPIO_3_MASK 0x8 -#define RTL8367C_SEL_GPIO_2_OFFSET 2 -#define RTL8367C_SEL_GPIO_2_MASK 0x4 -#define RTL8367C_SEL_GPIO_1_OFFSET 1 -#define RTL8367C_SEL_GPIO_1_MASK 0x2 -#define RTL8367C_SEL_GPIO_0_OFFSET 0 -#define RTL8367C_SEL_GPIO_0_MASK 0x1 - -#define RTL8367C_REG_STATUS_GPIO 0x13c9 -#define RTL8367C_STATUS_GPIO_OFFSET 0 -#define RTL8367C_STATUS_GPIO_MASK 0x3FFF - -#define RTL8367C_REG_SYNC_ETH_CFG 0x13e0 -#define RTL8367C_DUMMY2_OFFSET 9 -#define RTL8367C_DUMMY2_MASK 0xFE00 -#define RTL8367C_RFC2819_TYPE_OFFSET 8 -#define RTL8367C_RFC2819_TYPE_MASK 0x100 -#define RTL8367C_DUMMY1_OFFSET 7 -#define RTL8367C_DUMMY1_MASK 0x80 -#define RTL8367C_FIBER_SYNCE125_L_SEL_OFFSET 6 -#define RTL8367C_FIBER_SYNCE125_L_SEL_MASK 0x40 -#define RTL8367C_SYNC_ETH_EN_RTT2_OFFSET 5 -#define RTL8367C_SYNC_ETH_EN_RTT2_MASK 0x20 -#define RTL8367C_SYNC_ETH_EN_RTT1_OFFSET 4 -#define RTL8367C_SYNC_ETH_EN_RTT1_MASK 0x10 -#define RTL8367C_SYNC_ETH_SEL_DPLL_OFFSET 3 -#define RTL8367C_SYNC_ETH_SEL_DPLL_MASK 0x8 -#define RTL8367C_SYNC_ETH_SEL_PHYREF_OFFSET 2 -#define RTL8367C_SYNC_ETH_SEL_PHYREF_MASK 0x4 -#define RTL8367C_SYNC_ETH_SEL_XTAL_OFFSET 1 -#define RTL8367C_SYNC_ETH_SEL_XTAL_MASK 0x2 -#define RTL8367C_DUMMY0_OFFSET 0 -#define RTL8367C_DUMMY0_MASK 0x1 - -#define RTL8367C_REG_LED_DRI_CFG 0x13e1 -#define RTL8367C_LED_DRI_CFG_DUMMY_OFFSET 1 -#define RTL8367C_LED_DRI_CFG_DUMMY_MASK 0xFFFE -#define RTL8367C_LED_DRIVING_OFFSET 0 -#define RTL8367C_LED_DRIVING_MASK 0x1 - -#define RTL8367C_REG_CHIP_DEBUG2 0x13e2 -#define RTL8367C_RG2_DN_OFFSET 6 -#define RTL8367C_RG2_DN_MASK 0x1C0 -#define RTL8367C_RG2_DP_OFFSET 3 -#define RTL8367C_RG2_DP_MASK 0x38 -#define RTL8367C_DRI_EXT2_RG_OFFSET 2 -#define RTL8367C_DRI_EXT2_RG_MASK 0x4 -#define RTL8367C_DRI_EXT2_OFFSET 1 -#define RTL8367C_DRI_EXT2_MASK 0x2 -#define RTL8367C_SLR_EXT2_OFFSET 0 -#define RTL8367C_SLR_EXT2_MASK 0x1 - -#define RTL8367C_REG_DIGITAL_DEBUG_2 0x13e3 - -#define RTL8367C_REG_FIBER_RTL_OUI_CFG0 0x13e4 -#define RTL8367C_FIBER_RTL_OUI_CFG0_OFFSET 0 -#define RTL8367C_FIBER_RTL_OUI_CFG0_MASK 0xFF - -#define RTL8367C_REG_FIBER_RTL_OUI_CFG1 0x13e5 - -#define RTL8367C_REG_FIBER_CFG_0 0x13e6 -#define RTL8367C_REV_NUM_OFFSET 8 -#define RTL8367C_REV_NUM_MASK 0xF00 -#define RTL8367C_MODEL_NUM_OFFSET 0 -#define RTL8367C_MODEL_NUM_MASK 0x3F - -#define RTL8367C_REG_FIBER_CFG_1 0x13e7 -#define RTL8367C_SDS_FRC_REG4_OFFSET 12 -#define RTL8367C_SDS_FRC_REG4_MASK 0x1000 -#define RTL8367C_SDS_FRC_REG4_FIB100_OFFSET 11 -#define RTL8367C_SDS_FRC_REG4_FIB100_MASK 0x800 -#define RTL8367C_SEL_MASK_ONL_OFFSET 5 -#define RTL8367C_SEL_MASK_ONL_MASK 0x20 -#define RTL8367C_DIS_QUALITY_IN_MASK_OFFSET 4 -#define RTL8367C_DIS_QUALITY_IN_MASK_MASK 0x10 -#define RTL8367C_SDS_FRC_MODE_OFFSET 3 -#define RTL8367C_SDS_FRC_MODE_MASK 0x8 -#define RTL8367C_SDS_MODE_OFFSET 0 -#define RTL8367C_SDS_MODE_MASK 0x7 - -#define RTL8367C_REG_FIBER_CFG_2 0x13e8 -#define RTL8367C_SEL_SDET_PS_OFFSET 12 -#define RTL8367C_SEL_SDET_PS_MASK 0xF000 -#define RTL8367C_UTP_DIS_RX_OFFSET 10 -#define RTL8367C_UTP_DIS_RX_MASK 0xC00 -#define RTL8367C_UTP_FRC_LD_OFFSET 8 -#define RTL8367C_UTP_FRC_LD_MASK 0x300 -#define RTL8367C_SDS_RX_DISABLE_OFFSET 6 -#define RTL8367C_SDS_RX_DISABLE_MASK 0xC0 -#define RTL8367C_SDS_TX_DISABLE_OFFSET 4 -#define RTL8367C_SDS_TX_DISABLE_MASK 0x30 -#define RTL8367C_FIBER_CFG_2_SDS_PWR_ISO_OFFSET 2 -#define RTL8367C_FIBER_CFG_2_SDS_PWR_ISO_MASK 0xC -#define RTL8367C_SDS_FRC_LD_OFFSET 0 -#define RTL8367C_SDS_FRC_LD_MASK 0x3 - -#define RTL8367C_REG_FIBER_CFG_3 0x13e9 -#define RTL8367C_FIBER_CFG_3_OFFSET 0 -#define RTL8367C_FIBER_CFG_3_MASK 0xFFF - -#define RTL8367C_REG_FIBER_CFG_4 0x13ea - -#define RTL8367C_REG_UTP_FIB_DET 0x13eb -#define RTL8367C_FORCE_SEL_FIBER_OFFSET 14 -#define RTL8367C_FORCE_SEL_FIBER_MASK 0xC000 -#define RTL8367C_FIB_FINAL_TIMER_OFFSET 12 -#define RTL8367C_FIB_FINAL_TIMER_MASK 0x3000 -#define RTL8367C_FIB_LINK_TIMER_OFFSET 10 -#define RTL8367C_FIB_LINK_TIMER_MASK 0xC00 -#define RTL8367C_FIB_SDET_TIMER_OFFSET 8 -#define RTL8367C_FIB_SDET_TIMER_MASK 0x300 -#define RTL8367C_UTP_LINK_TIMER_OFFSET 6 -#define RTL8367C_UTP_LINK_TIMER_MASK 0xC0 -#define RTL8367C_UTP_SDET_TIMER_OFFSET 4 -#define RTL8367C_UTP_SDET_TIMER_MASK 0x30 -#define RTL8367C_FORCE_AUTODET_OFFSET 3 -#define RTL8367C_FORCE_AUTODET_MASK 0x8 -#define RTL8367C_AUTODET_FSM_CLR_OFFSET 2 -#define RTL8367C_AUTODET_FSM_CLR_MASK 0x4 -#define RTL8367C_UTP_FIRST_OFFSET 1 -#define RTL8367C_UTP_FIRST_MASK 0x2 -#define RTL8367C_UTP_FIB_DISAUTODET_OFFSET 0 -#define RTL8367C_UTP_FIB_DISAUTODET_MASK 0x1 - -#define RTL8367C_REG_NRESTORE_MAGIC_NUM 0x13ec -#define RTL8367C_NRESTORE_MAGIC_NUM_MASK 0xFFFF -#define RTL8367C_EEPROM_PROGRAM_CYCLE_OFFSET 0 -#define RTL8367C_EEPROM_PROGRAM_CYCLE_MASK 0x3 - -#define RTL8367C_REG_MAC_ACTIVE 0x13ee -#define RTL8367C_MAC_ACTIVE_H_OFFSET 9 -#define RTL8367C_MAC_ACTIVE_H_MASK 0xE00 -#define RTL8367C_FORCE_MAC_ACTIVE_OFFSET 8 -#define RTL8367C_FORCE_MAC_ACTIVE_MASK 0x100 -#define RTL8367C_MAC_ACTIVE_OFFSET 0 -#define RTL8367C_MAC_ACTIVE_MASK 0xFF - -#define RTL8367C_REG_SERDES_RESULT 0x13ef -#define RTL8367C_FIB100_DET_1_OFFSET 12 -#define RTL8367C_FIB100_DET_1_MASK 0x1000 -#define RTL8367C_FIB_ISO_1_OFFSET 11 -#define RTL8367C_FIB_ISO_1_MASK 0x800 -#define RTL8367C_SDS_ANFAULT_1_OFFSET 10 -#define RTL8367C_SDS_ANFAULT_1_MASK 0x400 -#define RTL8367C_SDS_INTB_1_OFFSET 9 -#define RTL8367C_SDS_INTB_1_MASK 0x200 -#define RTL8367C_SDS_LINK_OK_1_OFFSET 8 -#define RTL8367C_SDS_LINK_OK_1_MASK 0x100 -#define RTL8367C_FIB100_DET_OFFSET 4 -#define RTL8367C_FIB100_DET_MASK 0x10 -#define RTL8367C_FIB_ISO_OFFSET 3 -#define RTL8367C_FIB_ISO_MASK 0x8 -#define RTL8367C_SDS_ANFAULT_OFFSET 2 -#define RTL8367C_SDS_ANFAULT_MASK 0x4 -#define RTL8367C_SDS_INTB_OFFSET 1 -#define RTL8367C_SDS_INTB_MASK 0x2 -#define RTL8367C_SDS_LINK_OK_OFFSET 0 -#define RTL8367C_SDS_LINK_OK_MASK 0x1 - -#define RTL8367C_REG_CHIP_ECO 0x13f0 -#define RTL8367C_CFG_CHIP_ECO_OFFSET 1 -#define RTL8367C_CFG_CHIP_ECO_MASK 0xFFFE -#define RTL8367C_CFG_CKOUTEN_OFFSET 0 -#define RTL8367C_CFG_CKOUTEN_MASK 0x1 - -#define RTL8367C_REG_WAKELPI_SLOT_PRD 0x13f1 -#define RTL8367C_WAKELPI_SLOT_PRD_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_PRD_MASK 0x1F - -#define RTL8367C_REG_WAKELPI_SLOT_PG0 0x13f2 -#define RTL8367C_WAKELPI_SLOT_P1_OFFSET 8 -#define RTL8367C_WAKELPI_SLOT_P1_MASK 0x1F00 -#define RTL8367C_WAKELPI_SLOT_P0_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_P0_MASK 0x1F - -#define RTL8367C_REG_WAKELPI_SLOT_PG1 0x13f3 -#define RTL8367C_WAKELPI_SLOT_P3_OFFSET 8 -#define RTL8367C_WAKELPI_SLOT_P3_MASK 0x1F00 -#define RTL8367C_WAKELPI_SLOT_P2_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_P2_MASK 0x1F - -#define RTL8367C_REG_WAKELPI_SLOT_PG2 0x13f4 -#define RTL8367C_WAKELPI_SLOT_P5_OFFSET 8 -#define RTL8367C_WAKELPI_SLOT_P5_MASK 0x1F00 -#define RTL8367C_WAKELPI_SLOT_P4_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_P4_MASK 0x1F - -#define RTL8367C_REG_WAKELPI_SLOT_PG3 0x13f5 -#define RTL8367C_WAKELPI_SLOT_P7_OFFSET 8 -#define RTL8367C_WAKELPI_SLOT_P7_MASK 0x1F00 -#define RTL8367C_WAKELPI_SLOT_P6_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_P6_MASK 0x1F - -#define RTL8367C_REG_SYNC_FIFO_0 0x13f6 -#define RTL8367C_SYNC_FIFO_TX_OFFSET 8 -#define RTL8367C_SYNC_FIFO_TX_MASK 0x700 -#define RTL8367C_SYNC_FIFO_RX_OFFSET 0 -#define RTL8367C_SYNC_FIFO_RX_MASK 0xFF - -#define RTL8367C_REG_SYNC_FIFO_1 0x13f7 -#define RTL8367C_SYNC_FIFO_RX_ERR_P10_8_OFFSET 11 -#define RTL8367C_SYNC_FIFO_RX_ERR_P10_8_MASK 0x3800 -#define RTL8367C_SYNC_FIFO_TX_ERR_OFFSET 8 -#define RTL8367C_SYNC_FIFO_TX_ERR_MASK 0x700 -#define RTL8367C_SYNC_FIFO_RX_ERR_OFFSET 0 -#define RTL8367C_SYNC_FIFO_RX_ERR_MASK 0xFF - -#define RTL8367C_REG_RGM_EEE 0x13f8 -#define RTL8367C_EXT2_PAD_STOP_EN_OFFSET 14 -#define RTL8367C_EXT2_PAD_STOP_EN_MASK 0x4000 -#define RTL8367C_EXT1_PAD_STOP_EN_OFFSET 13 -#define RTL8367C_EXT1_PAD_STOP_EN_MASK 0x2000 -#define RTL8367C_EXT0_PAD_STOP_EN_OFFSET 12 -#define RTL8367C_EXT0_PAD_STOP_EN_MASK 0x1000 -#define RTL8367C_EXT2_CYCLE_PAD_OFFSET 8 -#define RTL8367C_EXT2_CYCLE_PAD_MASK 0xF00 -#define RTL8367C_EXT1_CYCLE_PAD_OFFSET 4 -#define RTL8367C_EXT1_CYCLE_PAD_MASK 0xF0 -#define RTL8367C_EXT0_CYCLE_PAD_OFFSET 0 -#define RTL8367C_EXT0_CYCLE_PAD_MASK 0xF - -#define RTL8367C_REG_EXT_TXC_DLY 0x13f9 -#define RTL8367C_EXT1_GMII_TX_DELAY_OFFSET 12 -#define RTL8367C_EXT1_GMII_TX_DELAY_MASK 0x7000 -#define RTL8367C_EXT0_GMII_TX_DELAY_OFFSET 9 -#define RTL8367C_EXT0_GMII_TX_DELAY_MASK 0xE00 -#define RTL8367C_EXT2_RGMII_TX_DELAY_OFFSET 6 -#define RTL8367C_EXT2_RGMII_TX_DELAY_MASK 0x1C0 -#define RTL8367C_EXT1_RGMII_TX_DELAY_OFFSET 3 -#define RTL8367C_EXT1_RGMII_TX_DELAY_MASK 0x38 -#define RTL8367C_EXT0_RGMII_TX_DELAY_OFFSET 0 -#define RTL8367C_EXT0_RGMII_TX_DELAY_MASK 0x7 - -#define RTL8367C_REG_IO_MISC_CTRL 0x13fa -#define RTL8367C_IO_BUZZER_EN_OFFSET 3 -#define RTL8367C_IO_BUZZER_EN_MASK 0x8 -#define RTL8367C_IO_INTRPT_EN_OFFSET 2 -#define RTL8367C_IO_INTRPT_EN_MASK 0x4 -#define RTL8367C_IO_NRESTORE_EN_OFFSET 1 -#define RTL8367C_IO_NRESTORE_EN_MASK 0x2 -#define RTL8367C_IO_UART_EN_OFFSET 0 -#define RTL8367C_IO_UART_EN_MASK 0x1 - -#define RTL8367C_REG_CHIP_DUMMY_NO 0x13fb -#define RTL8367C_CHIP_DUMMY_NO_OFFSET 0 -#define RTL8367C_CHIP_DUMMY_NO_MASK 0xF - -#define RTL8367C_REG_RC_CALIB_CFG 0x13fc -#define RTL8367C_TRIG_BURN_EFUSE_OFFSET 9 -#define RTL8367C_TRIG_BURN_EFUSE_MASK 0x200 -#define RTL8367C_AMP_CALIB_FAIL_OFFSET 8 -#define RTL8367C_AMP_CALIB_FAIL_MASK 0x100 -#define RTL8367C_R_CALIB_FAIL_OFFSET 7 -#define RTL8367C_R_CALIB_FAIL_MASK 0x80 -#define RTL8367C_CFG_CALIB_MODE_OFFSET 6 -#define RTL8367C_CFG_CALIB_MODE_MASK 0x40 -#define RTL8367C_CENTER_PORT_SEL_OFFSET 3 -#define RTL8367C_CENTER_PORT_SEL_MASK 0x38 -#define RTL8367C_CALIB_FINISH_OFFSET 2 -#define RTL8367C_CALIB_FINISH_MASK 0x4 -#define RTL8367C_CFG_CALIB_OPTION_OFFSET 1 -#define RTL8367C_CFG_CALIB_OPTION_MASK 0x2 -#define RTL8367C_CFG_CALIB_EN_OFFSET 0 -#define RTL8367C_CFG_CALIB_EN_MASK 0x1 - -#define RTL8367C_REG_WAKELPI_SLOT_PG4 0x13fd -#define RTL8367C_WAKELPI_SLOT_P9_OFFSET 8 -#define RTL8367C_WAKELPI_SLOT_P9_MASK 0x1F00 -#define RTL8367C_WAKELPI_SLOT_P8_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_P8_MASK 0x1F - -#define RTL8367C_REG_WAKELPI_SLOT_PG5 0x13fe -#define RTL8367C_WAKELPI_SLOT_PG5_OFFSET 0 -#define RTL8367C_WAKELPI_SLOT_PG5_MASK 0x1F - -/* (16'h1400)mtrpool_reg */ - -#define RTL8367C_REG_METER0_RATE_CTRL0 0x1400 - -#define RTL8367C_REG_METER0_RATE_CTRL1 0x1401 -#define RTL8367C_METER0_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER0_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER1_RATE_CTRL0 0x1402 - -#define RTL8367C_REG_METER1_RATE_CTRL1 0x1403 -#define RTL8367C_METER1_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER1_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER2_RATE_CTRL0 0x1404 - -#define RTL8367C_REG_METER2_RATE_CTRL1 0x1405 -#define RTL8367C_METER2_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER2_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER3_RATE_CTRL0 0x1406 - -#define RTL8367C_REG_METER3_RATE_CTRL1 0x1407 -#define RTL8367C_METER3_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER3_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER4_RATE_CTRL0 0x1408 - -#define RTL8367C_REG_METER4_RATE_CTRL1 0x1409 -#define RTL8367C_METER4_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER4_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER5_RATE_CTRL0 0x140a - -#define RTL8367C_REG_METER5_RATE_CTRL1 0x140b -#define RTL8367C_METER5_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER5_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER6_RATE_CTRL0 0x140c - -#define RTL8367C_REG_METER6_RATE_CTRL1 0x140d -#define RTL8367C_METER6_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER6_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER7_RATE_CTRL0 0x140e - -#define RTL8367C_REG_METER7_RATE_CTRL1 0x140f -#define RTL8367C_METER7_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER7_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER8_RATE_CTRL0 0x1410 - -#define RTL8367C_REG_METER8_RATE_CTRL1 0x1411 -#define RTL8367C_METER8_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER8_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER9_RATE_CTRL0 0x1412 - -#define RTL8367C_REG_METER9_RATE_CTRL1 0x1413 -#define RTL8367C_METER9_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER9_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER10_RATE_CTRL0 0x1414 - -#define RTL8367C_REG_METER10_RATE_CTRL1 0x1415 -#define RTL8367C_METER10_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER10_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER11_RATE_CTRL0 0x1416 - -#define RTL8367C_REG_METER11_RATE_CTRL1 0x1417 -#define RTL8367C_METER11_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER11_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER12_RATE_CTRL0 0x1418 - -#define RTL8367C_REG_METER12_RATE_CTRL1 0x1419 -#define RTL8367C_METER12_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER12_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER13_RATE_CTRL0 0x141a - -#define RTL8367C_REG_METER13_RATE_CTRL1 0x141b -#define RTL8367C_METER13_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER13_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER14_RATE_CTRL0 0x141c - -#define RTL8367C_REG_METER14_RATE_CTRL1 0x141d -#define RTL8367C_METER14_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER14_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER15_RATE_CTRL0 0x141e - -#define RTL8367C_REG_METER15_RATE_CTRL1 0x141f -#define RTL8367C_METER15_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER15_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER16_RATE_CTRL0 0x1420 - -#define RTL8367C_REG_METER16_RATE_CTRL1 0x1421 -#define RTL8367C_METER16_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER16_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER17_RATE_CTRL0 0x1422 - -#define RTL8367C_REG_METER17_RATE_CTRL1 0x1423 -#define RTL8367C_METER17_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER17_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER18_RATE_CTRL0 0x1424 - -#define RTL8367C_REG_METER18_RATE_CTRL1 0x1425 -#define RTL8367C_METER18_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER18_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER19_RATE_CTRL0 0x1426 - -#define RTL8367C_REG_METER19_RATE_CTRL1 0x1427 -#define RTL8367C_METER19_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER19_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER20_RATE_CTRL0 0x1428 - -#define RTL8367C_REG_METER20_RATE_CTRL1 0x1429 -#define RTL8367C_METER20_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER20_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER21_RATE_CTRL0 0x142a - -#define RTL8367C_REG_METER21_RATE_CTRL1 0x142b -#define RTL8367C_METER21_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER21_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER22_RATE_CTRL0 0x142c - -#define RTL8367C_REG_METER22_RATE_CTRL1 0x142d -#define RTL8367C_METER22_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER22_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER23_RATE_CTRL0 0x142e - -#define RTL8367C_REG_METER23_RATE_CTRL1 0x142f -#define RTL8367C_METER23_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER23_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER24_RATE_CTRL0 0x1430 - -#define RTL8367C_REG_METER24_RATE_CTRL1 0x1431 -#define RTL8367C_METER24_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER24_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER25_RATE_CTRL0 0x1432 - -#define RTL8367C_REG_METER25_RATE_CTRL1 0x1433 -#define RTL8367C_METER25_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER25_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER26_RATE_CTRL0 0x1434 - -#define RTL8367C_REG_METER26_RATE_CTRL1 0x1435 -#define RTL8367C_METER26_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER26_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER27_RATE_CTRL0 0x1436 - -#define RTL8367C_REG_METER27_RATE_CTRL1 0x1437 -#define RTL8367C_METER27_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER27_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER28_RATE_CTRL0 0x1438 - -#define RTL8367C_REG_METER28_RATE_CTRL1 0x1439 -#define RTL8367C_METER28_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER28_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER29_RATE_CTRL0 0x143a - -#define RTL8367C_REG_METER29_RATE_CTRL1 0x143b -#define RTL8367C_METER29_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER29_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER30_RATE_CTRL0 0x143c - -#define RTL8367C_REG_METER30_RATE_CTRL1 0x143d -#define RTL8367C_METER30_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER30_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER31_RATE_CTRL0 0x143e - -#define RTL8367C_REG_METER31_RATE_CTRL1 0x143f -#define RTL8367C_METER31_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER31_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER_MODE_SETTING0 0x1440 - -#define RTL8367C_REG_METER_MODE_SETTING1 0x1441 - -#define RTL8367C_REG_METER_MODE_TOKEN_CFG 0x1442 -#define RTL8367C_METER_MODE_TOKEN_CFG_OFFSET 0 -#define RTL8367C_METER_MODE_TOKEN_CFG_MASK 0x7FF - -#define RTL8367C_REG_METER0_BUCKET_SIZE 0x1600 - -#define RTL8367C_REG_METER1_BUCKET_SIZE 0x1601 - -#define RTL8367C_REG_METER2_BUCKET_SIZE 0x1602 - -#define RTL8367C_REG_METER3_BUCKET_SIZE 0x1603 - -#define RTL8367C_REG_METER4_BUCKET_SIZE 0x1604 - -#define RTL8367C_REG_METER5_BUCKET_SIZE 0x1605 - -#define RTL8367C_REG_METER6_BUCKET_SIZE 0x1606 - -#define RTL8367C_REG_METER7_BUCKET_SIZE 0x1607 - -#define RTL8367C_REG_METER8_BUCKET_SIZE 0x1608 - -#define RTL8367C_REG_METER9_BUCKET_SIZE 0x1609 - -#define RTL8367C_REG_METER10_BUCKET_SIZE 0x160a - -#define RTL8367C_REG_METER11_BUCKET_SIZE 0x160b - -#define RTL8367C_REG_METER12_BUCKET_SIZE 0x160c - -#define RTL8367C_REG_METER13_BUCKET_SIZE 0x160d - -#define RTL8367C_REG_METER14_BUCKET_SIZE 0x160e - -#define RTL8367C_REG_METER15_BUCKET_SIZE 0x160f - -#define RTL8367C_REG_METER16_BUCKET_SIZE 0x1610 - -#define RTL8367C_REG_METER17_BUCKET_SIZE 0x1611 - -#define RTL8367C_REG_METER18_BUCKET_SIZE 0x1612 - -#define RTL8367C_REG_METER19_BUCKET_SIZE 0x1613 - -#define RTL8367C_REG_METER20_BUCKET_SIZE 0x1614 - -#define RTL8367C_REG_METER21_BUCKET_SIZE 0x1615 - -#define RTL8367C_REG_METER22_BUCKET_SIZE 0x1616 - -#define RTL8367C_REG_METER23_BUCKET_SIZE 0x1617 - -#define RTL8367C_REG_METER24_BUCKET_SIZE 0x1618 - -#define RTL8367C_REG_METER25_BUCKET_SIZE 0x1619 - -#define RTL8367C_REG_METER26_BUCKET_SIZE 0x161a - -#define RTL8367C_REG_METER27_BUCKET_SIZE 0x161b - -#define RTL8367C_REG_METER28_BUCKET_SIZE 0x161c - -#define RTL8367C_REG_METER29_BUCKET_SIZE 0x161d - -#define RTL8367C_REG_METER30_BUCKET_SIZE 0x161e - -#define RTL8367C_REG_METER31_BUCKET_SIZE 0x161f - -#define RTL8367C_REG_METER_CTRL0 0x1700 -#define RTL8367C_METER_OP_OFFSET 8 -#define RTL8367C_METER_OP_MASK 0x100 -#define RTL8367C_METER_TICK_OFFSET 0 -#define RTL8367C_METER_TICK_MASK 0xFF - -#define RTL8367C_REG_METER_CTRL1 0x1701 -#define RTL8367C_METER_CTRL1_OFFSET 0 -#define RTL8367C_METER_CTRL1_MASK 0xFF - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR0 0x1702 - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR1 0x1703 - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR0_8051 0x1704 - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR1_8051 0x1705 - -#define RTL8367C_REG_METER_IFG_CTRL0 0x1712 -#define RTL8367C_METER15_IFG_OFFSET 15 -#define RTL8367C_METER15_IFG_MASK 0x8000 -#define RTL8367C_METER14_IFG_OFFSET 14 -#define RTL8367C_METER14_IFG_MASK 0x4000 -#define RTL8367C_METER13_IFG_OFFSET 13 -#define RTL8367C_METER13_IFG_MASK 0x2000 -#define RTL8367C_METER12_IFG_OFFSET 12 -#define RTL8367C_METER12_IFG_MASK 0x1000 -#define RTL8367C_METER11_IFG_OFFSET 11 -#define RTL8367C_METER11_IFG_MASK 0x800 -#define RTL8367C_METER10_IFG_OFFSET 10 -#define RTL8367C_METER10_IFG_MASK 0x400 -#define RTL8367C_METER9_IFG_OFFSET 9 -#define RTL8367C_METER9_IFG_MASK 0x200 -#define RTL8367C_METER8_IFG_OFFSET 8 -#define RTL8367C_METER8_IFG_MASK 0x100 -#define RTL8367C_METER7_IFG_OFFSET 7 -#define RTL8367C_METER7_IFG_MASK 0x80 -#define RTL8367C_METER6_IFG_OFFSET 6 -#define RTL8367C_METER6_IFG_MASK 0x40 -#define RTL8367C_METER5_IFG_OFFSET 5 -#define RTL8367C_METER5_IFG_MASK 0x20 -#define RTL8367C_METER4_IFG_OFFSET 4 -#define RTL8367C_METER4_IFG_MASK 0x10 -#define RTL8367C_METER3_IFG_OFFSET 3 -#define RTL8367C_METER3_IFG_MASK 0x8 -#define RTL8367C_METER2_IFG_OFFSET 2 -#define RTL8367C_METER2_IFG_MASK 0x4 -#define RTL8367C_METER1_IFG_OFFSET 1 -#define RTL8367C_METER1_IFG_MASK 0x2 -#define RTL8367C_METER0_IFG_OFFSET 0 -#define RTL8367C_METER0_IFG_MASK 0x1 - -#define RTL8367C_REG_METER_IFG_CTRL1 0x1713 -#define RTL8367C_METER31_IFG_OFFSET 15 -#define RTL8367C_METER31_IFG_MASK 0x8000 -#define RTL8367C_METER30_IFG_OFFSET 14 -#define RTL8367C_METER30_IFG_MASK 0x4000 -#define RTL8367C_METER29_IFG_OFFSET 13 -#define RTL8367C_METER29_IFG_MASK 0x2000 -#define RTL8367C_METER28_IFG_OFFSET 12 -#define RTL8367C_METER28_IFG_MASK 0x1000 -#define RTL8367C_METER27_IFG_OFFSET 11 -#define RTL8367C_METER27_IFG_MASK 0x800 -#define RTL8367C_METER26_IFG_OFFSET 10 -#define RTL8367C_METER26_IFG_MASK 0x400 -#define RTL8367C_METER25_IFG_OFFSET 9 -#define RTL8367C_METER25_IFG_MASK 0x200 -#define RTL8367C_METER24_IFG_OFFSET 8 -#define RTL8367C_METER24_IFG_MASK 0x100 -#define RTL8367C_METER23_IFG_OFFSET 7 -#define RTL8367C_METER23_IFG_MASK 0x80 -#define RTL8367C_METER22_IFG_OFFSET 6 -#define RTL8367C_METER22_IFG_MASK 0x40 -#define RTL8367C_METER21_IFG_OFFSET 5 -#define RTL8367C_METER21_IFG_MASK 0x20 -#define RTL8367C_METER20_IFG_OFFSET 4 -#define RTL8367C_METER20_IFG_MASK 0x10 -#define RTL8367C_METER19_IFG_OFFSET 3 -#define RTL8367C_METER19_IFG_MASK 0x8 -#define RTL8367C_METER18_IFG_OFFSET 2 -#define RTL8367C_METER18_IFG_MASK 0x4 -#define RTL8367C_METER17_IFG_OFFSET 1 -#define RTL8367C_METER17_IFG_MASK 0x2 -#define RTL8367C_METER16_IFG_OFFSET 0 -#define RTL8367C_METER16_IFG_MASK 0x1 - -#define RTL8367C_REG_METER_CTRL2 0x1722 -#define RTL8367C_cfg_mtr_tick_8g_OFFSET 8 -#define RTL8367C_cfg_mtr_tick_8g_MASK 0xFF00 -#define RTL8367C_cfg_mtr_dec_cnt_8g_OFFSET 0 -#define RTL8367C_cfg_mtr_dec_cnt_8g_MASK 0xFF - -#define RTL8367C_REG_DUMMY_1723 0x1723 - -#define RTL8367C_REG_DUMMY_1724 0x1724 - -#define RTL8367C_REG_DUMMY_1725 0x1725 - -#define RTL8367C_REG_DUMMY_1726 0x1726 - -#define RTL8367C_REG_DUMMY_1727 0x1727 - -#define RTL8367C_REG_DUMMY_1728 0x1728 - -#define RTL8367C_REG_DUMMY_1729 0x1729 - -#define RTL8367C_REG_DUMMY_172A 0x172a - -#define RTL8367C_REG_DUMMY_172B 0x172b - -#define RTL8367C_REG_DUMMY_172C 0x172c - -#define RTL8367C_REG_DUMMY_172D 0x172d - -#define RTL8367C_REG_DUMMY_172E 0x172e - -#define RTL8367C_REG_DUMMY_172F 0x172f - -#define RTL8367C_REG_DUMMY_1730 0x1730 - -#define RTL8367C_REG_DUMMY_1731 0x1731 - -#define RTL8367C_REG_METER32_RATE_CTRL0 0x1740 - -#define RTL8367C_REG_METER32_RATE_CTRL1 0x1741 -#define RTL8367C_METER32_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER32_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER33_RATE_CTRL0 0x1742 - -#define RTL8367C_REG_METER33_RATE_CTRL1 0x1743 -#define RTL8367C_METER33_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER33_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER34_RATE_CTRL0 0x1744 - -#define RTL8367C_REG_METER34_RATE_CTRL1 0x1745 -#define RTL8367C_METER34_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER34_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER35_RATE_CTRL0 0x1746 - -#define RTL8367C_REG_METER35_RATE_CTRL1 0x1747 -#define RTL8367C_METER35_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER35_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER36_RATE_CTRL0 0x1748 - -#define RTL8367C_REG_METER36_RATE_CTRL1 0x1749 -#define RTL8367C_METER36_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER36_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER37_RATE_CTRL0 0x174a - -#define RTL8367C_REG_METER37_RATE_CTRL1 0x174b -#define RTL8367C_METER37_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER37_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER38_RATE_CTRL0 0x174c - -#define RTL8367C_REG_METER38_RATE_CTRL1 0x174d -#define RTL8367C_METER38_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER38_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER39_RATE_CTRL0 0x174e - -#define RTL8367C_REG_METER39_RATE_CTRL1 0x174f -#define RTL8367C_METER39_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER39_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER40_RATE_CTRL0 0x1750 - -#define RTL8367C_REG_METER40_RATE_CTRL1 0x1751 -#define RTL8367C_METER40_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER40_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER41_RATE_CTRL0 0x1752 - -#define RTL8367C_REG_METER41_RATE_CTRL1 0x1753 -#define RTL8367C_METER41_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER41_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER42_RATE_CTRL0 0x1754 - -#define RTL8367C_REG_METER42_RATE_CTRL1 0x1755 -#define RTL8367C_METER42_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER42_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER43_RATE_CTRL0 0x1756 - -#define RTL8367C_REG_METER43_RATE_CTRL1 0x1757 -#define RTL8367C_METER43_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER43_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER44_RATE_CTRL0 0x1758 - -#define RTL8367C_REG_METER44_RATE_CTRL1 0x1759 -#define RTL8367C_METER44_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER44_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER45_RATE_CTRL0 0x175a - -#define RTL8367C_REG_METER45_RATE_CTRL1 0x175b -#define RTL8367C_METER45_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER45_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER46_RATE_CTRL0 0x175c - -#define RTL8367C_REG_METER46_RATE_CTRL1 0x175d -#define RTL8367C_METER46_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER46_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER47_RATE_CTRL0 0x175e - -#define RTL8367C_REG_METER47_RATE_CTRL1 0x175f -#define RTL8367C_METER47_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER47_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER48_RATE_CTRL0 0x1760 - -#define RTL8367C_REG_METER48_RATE_CTRL1 0x1761 -#define RTL8367C_METER48_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER48_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER49_RATE_CTRL0 0x1762 - -#define RTL8367C_REG_METER49_RATE_CTRL1 0x1763 -#define RTL8367C_METER49_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER49_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER50_RATE_CTRL0 0x1764 - -#define RTL8367C_REG_METER50_RATE_CTRL1 0x1765 -#define RTL8367C_METER50_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER50_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER51_RATE_CTRL0 0x1766 - -#define RTL8367C_REG_METER51_RATE_CTRL1 0x1767 -#define RTL8367C_METER51_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER51_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER52_RATE_CTRL0 0x1768 - -#define RTL8367C_REG_METER52_RATE_CTRL1 0x1769 -#define RTL8367C_METER52_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER52_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER53_RATE_CTRL0 0x176a - -#define RTL8367C_REG_METER53_RATE_CTRL1 0x176b -#define RTL8367C_METER53_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER53_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER54_RATE_CTRL0 0x176c - -#define RTL8367C_REG_METER54_RATE_CTRL1 0x176d -#define RTL8367C_METER54_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER54_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER55_RATE_CTRL0 0x176e - -#define RTL8367C_REG_METER55_RATE_CTRL1 0x176f -#define RTL8367C_METER55_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER55_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER56_RATE_CTRL0 0x1770 - -#define RTL8367C_REG_METER56_RATE_CTRL1 0x1771 -#define RTL8367C_METER56_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER56_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER57_RATE_CTRL0 0x1772 - -#define RTL8367C_REG_METER57_RATE_CTRL1 0x1773 -#define RTL8367C_METER57_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER57_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER58_RATE_CTRL0 0x1774 - -#define RTL8367C_REG_METER58_RATE_CTRL1 0x1775 -#define RTL8367C_METER58_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER58_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER59_RATE_CTRL0 0x1776 - -#define RTL8367C_REG_METER59_RATE_CTRL1 0x1777 -#define RTL8367C_METER59_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER59_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER60_RATE_CTRL0 0x1778 - -#define RTL8367C_REG_METER60_RATE_CTRL1 0x1779 -#define RTL8367C_METER60_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER60_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER61_RATE_CTRL0 0x177a - -#define RTL8367C_REG_METER61_RATE_CTRL1 0x177b -#define RTL8367C_METER61_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER61_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER62_RATE_CTRL0 0x177c - -#define RTL8367C_REG_METER62_RATE_CTRL1 0x177d -#define RTL8367C_METER62_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER62_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER63_RATE_CTRL0 0x177e - -#define RTL8367C_REG_METER63_RATE_CTRL1 0x177f -#define RTL8367C_METER63_RATE_CTRL1_OFFSET 0 -#define RTL8367C_METER63_RATE_CTRL1_MASK 0x7 - -#define RTL8367C_REG_METER_MODE_SETTING2 0x1780 - -#define RTL8367C_REG_METER_MODE_SETTING3 0x1781 - -#define RTL8367C_REG_METER32_BUCKET_SIZE 0x1790 - -#define RTL8367C_REG_METER33_BUCKET_SIZE 0x1791 - -#define RTL8367C_REG_METER34_BUCKET_SIZE 0x1792 - -#define RTL8367C_REG_METER35_BUCKET_SIZE 0x1793 - -#define RTL8367C_REG_METER36_BUCKET_SIZE 0x1794 - -#define RTL8367C_REG_METER37_BUCKET_SIZE 0x1795 - -#define RTL8367C_REG_METER38_BUCKET_SIZE 0x1796 - -#define RTL8367C_REG_METER39_BUCKET_SIZE 0x1797 - -#define RTL8367C_REG_METER40_BUCKET_SIZE 0x1798 - -#define RTL8367C_REG_METER41_BUCKET_SIZE 0x1799 - -#define RTL8367C_REG_METER42_BUCKET_SIZE 0x179a - -#define RTL8367C_REG_METER43_BUCKET_SIZE 0x179b - -#define RTL8367C_REG_METER44_BUCKET_SIZE 0x179c - -#define RTL8367C_REG_METER45_BUCKET_SIZE 0x179d - -#define RTL8367C_REG_METER46_BUCKET_SIZE 0x179e - -#define RTL8367C_REG_METER47_BUCKET_SIZE 0x179f - -#define RTL8367C_REG_METER48_BUCKET_SIZE 0x17a0 - -#define RTL8367C_REG_METER49_BUCKET_SIZE 0x17a1 - -#define RTL8367C_REG_METER50_BUCKET_SIZE 0x17a2 - -#define RTL8367C_REG_METER51_BUCKET_SIZE 0x17a3 - -#define RTL8367C_REG_METER52_BUCKET_SIZE 0x17a4 - -#define RTL8367C_REG_METER53_BUCKET_SIZE 0x17a5 - -#define RTL8367C_REG_METER54_BUCKET_SIZE 0x17a6 - -#define RTL8367C_REG_METER55_BUCKET_SIZE 0x17a7 - -#define RTL8367C_REG_METER56_BUCKET_SIZE 0x17a8 - -#define RTL8367C_REG_METER57_BUCKET_SIZE 0x17a9 - -#define RTL8367C_REG_METER58_BUCKET_SIZE 0x17aa - -#define RTL8367C_REG_METER59_BUCKET_SIZE 0x17ab - -#define RTL8367C_REG_METER60_BUCKET_SIZE 0x17ac - -#define RTL8367C_REG_METER61_BUCKET_SIZE 0x17ad - -#define RTL8367C_REG_METER62_BUCKET_SIZE 0x17ae - -#define RTL8367C_REG_METER63_BUCKET_SIZE 0x17af - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR2 0x17b0 - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR3 0x17b1 - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR2_8051 0x17b2 - -#define RTL8367C_REG_METER_OVERRATE_INDICATOR3_8051 0x17b3 - -#define RTL8367C_REG_METER_IFG_CTRL2 0x17b4 -#define RTL8367C_METER47_IFG_OFFSET 15 -#define RTL8367C_METER47_IFG_MASK 0x8000 -#define RTL8367C_METER46_IFG_OFFSET 14 -#define RTL8367C_METER46_IFG_MASK 0x4000 -#define RTL8367C_METER45_IFG_OFFSET 13 -#define RTL8367C_METER45_IFG_MASK 0x2000 -#define RTL8367C_METER44_IFG_OFFSET 12 -#define RTL8367C_METER44_IFG_MASK 0x1000 -#define RTL8367C_METER43_IFG_OFFSET 11 -#define RTL8367C_METER43_IFG_MASK 0x800 -#define RTL8367C_METER42_IFG_OFFSET 10 -#define RTL8367C_METER42_IFG_MASK 0x400 -#define RTL8367C_METER41_IFG_OFFSET 9 -#define RTL8367C_METER41_IFG_MASK 0x200 -#define RTL8367C_METER40_IFG_OFFSET 8 -#define RTL8367C_METER40_IFG_MASK 0x100 -#define RTL8367C_METER39_IFG_OFFSET 7 -#define RTL8367C_METER39_IFG_MASK 0x80 -#define RTL8367C_METER38_IFG_OFFSET 6 -#define RTL8367C_METER38_IFG_MASK 0x40 -#define RTL8367C_METER37_IFG_OFFSET 5 -#define RTL8367C_METER37_IFG_MASK 0x20 -#define RTL8367C_METER36_IFG_OFFSET 4 -#define RTL8367C_METER36_IFG_MASK 0x10 -#define RTL8367C_METER35_IFG_OFFSET 3 -#define RTL8367C_METER35_IFG_MASK 0x8 -#define RTL8367C_METER34_IFG_OFFSET 2 -#define RTL8367C_METER34_IFG_MASK 0x4 -#define RTL8367C_METER33_IFG_OFFSET 1 -#define RTL8367C_METER33_IFG_MASK 0x2 -#define RTL8367C_METER32_IFG_OFFSET 0 -#define RTL8367C_METER32_IFG_MASK 0x1 - -#define RTL8367C_REG_METER_IFG_CTRL3 0x17b5 -#define RTL8367C_METER63_IFG_OFFSET 15 -#define RTL8367C_METER63_IFG_MASK 0x8000 -#define RTL8367C_METER62_IFG_OFFSET 14 -#define RTL8367C_METER62_IFG_MASK 0x4000 -#define RTL8367C_METER61_IFG_OFFSET 13 -#define RTL8367C_METER61_IFG_MASK 0x2000 -#define RTL8367C_METER60_IFG_OFFSET 12 -#define RTL8367C_METER60_IFG_MASK 0x1000 -#define RTL8367C_METER59_IFG_OFFSET 11 -#define RTL8367C_METER59_IFG_MASK 0x800 -#define RTL8367C_METER58_IFG_OFFSET 10 -#define RTL8367C_METER58_IFG_MASK 0x400 -#define RTL8367C_METER57_IFG_OFFSET 9 -#define RTL8367C_METER57_IFG_MASK 0x200 -#define RTL8367C_METER56_IFG_OFFSET 8 -#define RTL8367C_METER56_IFG_MASK 0x100 -#define RTL8367C_METER55_IFG_OFFSET 7 -#define RTL8367C_METER55_IFG_MASK 0x80 -#define RTL8367C_METER54_IFG_OFFSET 6 -#define RTL8367C_METER54_IFG_MASK 0x40 -#define RTL8367C_METER53_IFG_OFFSET 5 -#define RTL8367C_METER53_IFG_MASK 0x20 -#define RTL8367C_METER52_IFG_OFFSET 4 -#define RTL8367C_METER52_IFG_MASK 0x10 -#define RTL8367C_METER51_IFG_OFFSET 3 -#define RTL8367C_METER51_IFG_MASK 0x8 -#define RTL8367C_METER50_IFG_OFFSET 2 -#define RTL8367C_METER50_IFG_MASK 0x4 -#define RTL8367C_METER49_IFG_OFFSET 1 -#define RTL8367C_METER49_IFG_MASK 0x2 -#define RTL8367C_METER48_IFG_OFFSET 0 -#define RTL8367C_METER48_IFG_MASK 0x1 - -#define RTL8367C_REG_METER_MISC 0x17b6 -#define RTL8367C_METER_MISC_OFFSET 0 -#define RTL8367C_METER_MISC_MASK 0x1 - -/* (16'h1800)8051_RLDP_EEE_reg */ - -#define RTL8367C_REG_EEELLDP_CTRL0 0x1820 -#define RTL8367C_EEELLDP_SUBTYPE_OFFSET 6 -#define RTL8367C_EEELLDP_SUBTYPE_MASK 0x3FC0 -#define RTL8367C_EEELLDP_TRAP_8051_OFFSET 2 -#define RTL8367C_EEELLDP_TRAP_8051_MASK 0x4 -#define RTL8367C_EEELLDP_TRAP_CPU_OFFSET 1 -#define RTL8367C_EEELLDP_TRAP_CPU_MASK 0x2 -#define RTL8367C_EEELLDP_ENABLE_OFFSET 0 -#define RTL8367C_EEELLDP_ENABLE_MASK 0x1 - -#define RTL8367C_REG_EEELLDP_PMSK 0x1822 -#define RTL8367C_EEELLDP_PMSK_OFFSET 0 -#define RTL8367C_EEELLDP_PMSK_MASK 0x7FF - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_08 0x1843 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_07 0x1844 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_06 0x1845 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_05 0x1846 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_04 0x1847 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_03 0x1848 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_02 0x1849 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_01 0x184a - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P00_00 0x184b - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_08 0x184c - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_07 0x184d - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_06 0x184e - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_05 0x184f - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_04 0x1850 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_03 0x1851 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_02 0x1852 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_01 0x1853 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P01_00 0x1854 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_08 0x1855 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_07 0x1856 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_06 0x1857 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_05 0x1858 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_04 0x1859 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_03 0x185a - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_02 0x185b - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_01 0x185c - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P02_00 0x185d - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_08 0x185e - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_07 0x185f - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_06 0x1860 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_05 0x1861 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_04 0x1862 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_03 0x1863 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_02 0x1864 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_01 0x1865 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P03_00 0x1866 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_08 0x1867 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_07 0x1868 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_06 0x1869 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_05 0x186a - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_04 0x186b - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_03 0x186c - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_02 0x186d - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_01 0x186e - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P04_00 0x186f - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_08 0x1870 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_07 0x1871 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_06 0x1872 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_05 0x1873 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_04 0x1874 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_03 0x1875 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_02 0x1876 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_01 0x1877 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P05_00 0x1878 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_08 0x1879 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_07 0x187a - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_06 0x187b - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_05 0x187c - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_04 0x187d - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_03 0x187e - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_02 0x187f - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_01 0x1880 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P06_00 0x1881 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_08 0x1882 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_07 0x1883 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_06 0x1884 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_05 0x1885 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_04 0x1886 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_03 0x1887 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_02 0x1888 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_01 0x1889 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P07_00 0x188a - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_08 0x188b - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_07 0x188c - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_06 0x188d - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_05 0x188e - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_04 0x188f - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_03 0x1890 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_02 0x1891 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_01 0x1892 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P08_00 0x1893 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_08 0x1894 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_07 0x1895 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_06 0x1896 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_05 0x1897 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_04 0x1898 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_03 0x1899 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_02 0x189a - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_01 0x189b - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P09_00 0x189c - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_08 0x189d - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_07 0x189e - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_06 0x189f - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_05 0x18a0 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_04 0x18a1 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_03 0x18a2 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_02 0x18a3 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_01 0x18a4 - -#define RTL8367C_REG_EEELLDP_RX_VALUE_P10_00 0x18a5 - -#define RTL8367C_REG_RLDP_CTRL0 0x18e0 -#define RTL8367C_RLDP_TRIGGER_MODE_OFFSET 14 -#define RTL8367C_RLDP_TRIGGER_MODE_MASK 0x4000 -#define RTL8367C_RLDP_8051_LOOP_PORTMSK_OFFSET 6 -#define RTL8367C_RLDP_8051_LOOP_PORTMSK_MASK 0x3FC0 -#define RTL8367C_RLPP_8051_TRAP_OFFSET 5 -#define RTL8367C_RLPP_8051_TRAP_MASK 0x20 -#define RTL8367C_RLDP_INDICATOR_SOURCE_OFFSET 4 -#define RTL8367C_RLDP_INDICATOR_SOURCE_MASK 0x10 -#define RTL8367C_RLDP_GEN_RANDOM_OFFSET 3 -#define RTL8367C_RLDP_GEN_RANDOM_MASK 0x8 -#define RTL8367C_RLDP_COMP_ID_OFFSET 2 -#define RTL8367C_RLDP_COMP_ID_MASK 0x4 -#define RTL8367C_RLDP_8051_ENABLE_OFFSET 1 -#define RTL8367C_RLDP_8051_ENABLE_MASK 0x2 -#define RTL8367C_RLDP_ENABLE_OFFSET 0 -#define RTL8367C_RLDP_ENABLE_MASK 0x1 - -#define RTL8367C_REG_RLDP_CTRL1 0x18e1 -#define RTL8367C_RLDP_RETRY_COUNT_LOOPSTATE_OFFSET 8 -#define RTL8367C_RLDP_RETRY_COUNT_LOOPSTATE_MASK 0xFF00 -#define RTL8367C_RLDP_RETRY_COUNT_CHKSTATE_OFFSET 0 -#define RTL8367C_RLDP_RETRY_COUNT_CHKSTATE_MASK 0xFF - -#define RTL8367C_REG_RLDP_CTRL2 0x18e2 - -#define RTL8367C_REG_RLDP_CTRL3 0x18e3 - -#define RTL8367C_REG_RLDP_CTRL4 0x18e4 -#define RTL8367C_RLDP_CTRL4_OFFSET 0 -#define RTL8367C_RLDP_CTRL4_MASK 0x7FF - -#define RTL8367C_REG_RLDP_RAND_NUM0 0x18e5 - -#define RTL8367C_REG_RLDP_RAND_NUM1 0x18e6 - -#define RTL8367C_REG_RLDP_RAND_NUM2 0x18e7 - -#define RTL8367C_REG_RLDP_MAGIC_NUM0 0x18e8 - -#define RTL8367C_REG_RLDP_MAGIC_NUM1 0x18e9 - -#define RTL8367C_REG_RLDP_MAGIC_NUM2 0x18ea - -#define RTL8367C_REG_RLDP_LOOPED_INDICATOR 0x18eb -#define RTL8367C_RLDP_LOOPED_INDICATOR_OFFSET 0 -#define RTL8367C_RLDP_LOOPED_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_RLDP_LOOP_PORT_REG0 0x18ec -#define RTL8367C_RLDP_LOOP_PORT_01_OFFSET 8 -#define RTL8367C_RLDP_LOOP_PORT_01_MASK 0xF00 -#define RTL8367C_RLDP_LOOP_PORT_00_OFFSET 0 -#define RTL8367C_RLDP_LOOP_PORT_00_MASK 0xF - -#define RTL8367C_REG_RLDP_LOOP_PORT_REG1 0x18ed -#define RTL8367C_RLDP_LOOP_PORT_03_OFFSET 8 -#define RTL8367C_RLDP_LOOP_PORT_03_MASK 0xF00 -#define RTL8367C_RLDP_LOOP_PORT_02_OFFSET 0 -#define RTL8367C_RLDP_LOOP_PORT_02_MASK 0xF - -#define RTL8367C_REG_RLDP_LOOP_PORT_REG2 0x18ee -#define RTL8367C_RLDP_LOOP_PORT_05_OFFSET 8 -#define RTL8367C_RLDP_LOOP_PORT_05_MASK 0xF00 -#define RTL8367C_RLDP_LOOP_PORT_04_OFFSET 0 -#define RTL8367C_RLDP_LOOP_PORT_04_MASK 0xF - -#define RTL8367C_REG_RLDP_LOOP_PORT_REG3 0x18ef -#define RTL8367C_RLDP_LOOP_PORT_07_OFFSET 8 -#define RTL8367C_RLDP_LOOP_PORT_07_MASK 0xF00 -#define RTL8367C_RLDP_LOOP_PORT_06_OFFSET 0 -#define RTL8367C_RLDP_LOOP_PORT_06_MASK 0xF - -#define RTL8367C_REG_RLDP_RELEASED_INDICATOR 0x18f0 -#define RTL8367C_RLDP_RELEASED_INDICATOR_OFFSET 0 -#define RTL8367C_RLDP_RELEASED_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_RLDP_LOOPSTATUS_INDICATOR 0x18f1 -#define RTL8367C_RLDP_LOOPSTATUS_INDICATOR_OFFSET 0 -#define RTL8367C_RLDP_LOOPSTATUS_INDICATOR_MASK 0x7FF - -#define RTL8367C_REG_RLDP_LOOP_PORT_REG4 0x18f2 -#define RTL8367C_RLDP_LOOP_PORT_9_OFFSET 8 -#define RTL8367C_RLDP_LOOP_PORT_9_MASK 0xF00 -#define RTL8367C_RLDP_LOOP_PORT_8_OFFSET 0 -#define RTL8367C_RLDP_LOOP_PORT_8_MASK 0xF - -#define RTL8367C_REG_RLDP_LOOP_PORT_REG5 0x18f3 -#define RTL8367C_RLDP_LOOP_PORT_REG5_OFFSET 0 -#define RTL8367C_RLDP_LOOP_PORT_REG5_MASK 0xF - -#define RTL8367C_REG_RLDP_CTRL5 0x18f4 -#define RTL8367C_RLDP_CTRL5_OFFSET 0 -#define RTL8367C_RLDP_CTRL5_MASK 0x7 - -/* (16'h1900)EEE_EEEP_reg */ - -#define RTL8367C_REG_EEE_500M_CTRL0 0x1900 -#define RTL8367C_EEE_500M_CTRL0_OFFSET 0 -#define RTL8367C_EEE_500M_CTRL0_MASK 0xFF - -#define RTL8367C_REG_EEE_RXIDLE_GIGA_CTRL 0x1901 -#define RTL8367C_EEE_RXIDLE_GIGA_EN_OFFSET 8 -#define RTL8367C_EEE_RXIDLE_GIGA_EN_MASK 0x100 -#define RTL8367C_EEE_RXIDLE_GIGA_OFFSET 0 -#define RTL8367C_EEE_RXIDLE_GIGA_MASK 0xFF - -#define RTL8367C_REG_EEE_RXIDLE_500M_CTRL 0x1902 -#define RTL8367C_EEE_RXIDLE_500M_EN_OFFSET 8 -#define RTL8367C_EEE_RXIDLE_500M_EN_MASK 0x100 -#define RTL8367C_EEE_RXIDLE_500M_OFFSET 0 -#define RTL8367C_EEE_RXIDLE_500M_MASK 0xFF - -#define RTL8367C_REG_EEE_DECISION_GIGA_500M 0x1903 -#define RTL8367C_EEE_DECISION_GIGA_OFFSET 8 -#define RTL8367C_EEE_DECISION_GIGA_MASK 0xFF00 -#define RTL8367C_EEE_DECISION_500M_OFFSET 0 -#define RTL8367C_EEE_DECISION_500M_MASK 0xFF - -#define RTL8367C_REG_EEE_DECISION_100M 0x1904 -#define RTL8367C_EEE_DECISION_100M_OFFSET 0 -#define RTL8367C_EEE_DECISION_100M_MASK 0xFF - -#define RTL8367C_REG_EEEP_DEFER_TXLPI 0x1905 -#define RTL8367C_EEEP_DEFER_TXLPI_OFFSET 0 -#define RTL8367C_EEEP_DEFER_TXLPI_MASK 0x1 - -#define RTL8367C_REG_EEEP_EN 0x1906 -#define RTL8367C_EEEP_SLAVE_EN_OFFSET 3 -#define RTL8367C_EEEP_SLAVE_EN_MASK 0x8 -#define RTL8367C_EEEP_100M_OFFSET 2 -#define RTL8367C_EEEP_100M_MASK 0x4 -#define RTL8367C_EEEP_500M_OFFSET 1 -#define RTL8367C_EEEP_500M_MASK 0x2 -#define RTL8367C_EEEP_GIGA_OFFSET 0 -#define RTL8367C_EEEP_GIGA_MASK 0x1 - -#define RTL8367C_REG_EEEP_TI_GIGA_500M 0x1907 -#define RTL8367C_EEEP_TI_GIGA_OFFSET 8 -#define RTL8367C_EEEP_TI_GIGA_MASK 0xFF00 -#define RTL8367C_EEEP_TI_500M_OFFSET 0 -#define RTL8367C_EEEP_TI_500M_MASK 0xFF - -#define RTL8367C_REG_EEEP_TI_100M 0x1908 -#define RTL8367C_EEEP_TI_100M_OFFSET 0 -#define RTL8367C_EEEP_TI_100M_MASK 0xFF - -#define RTL8367C_REG_EEEP_CTRL2 0x1909 -#define RTL8367C_EEEP_CTRL2_OFFSET 0 -#define RTL8367C_EEEP_CTRL2_MASK 0xFF - -#define RTL8367C_REG_EEEP_RX_RATE_500M 0x190b - -#define RTL8367C_REG_EEEP_RW_GIGA_SLV 0x190c -#define RTL8367C_EEEP_RW_GIGA_SLV_OFFSET 0 -#define RTL8367C_EEEP_RW_GIGA_SLV_MASK 0xFF - -#define RTL8367C_REG_EEEP_TMR_GIGA 0x190d -#define RTL8367C_RX_IDLE_EEEP_GIGA_OFFSET 8 -#define RTL8367C_RX_IDLE_EEEP_GIGA_MASK 0xFF00 -#define RTL8367C_RX_MIN_SLP_TMR_GIGA_OFFSET 0 -#define RTL8367C_RX_MIN_SLP_TMR_GIGA_MASK 0xFF - -#define RTL8367C_REG_EEEP_TMR_500M 0x190e -#define RTL8367C_RX_IDLE_EEEP_500M_OFFSET 8 -#define RTL8367C_RX_IDLE_EEEP_500M_MASK 0xFF00 -#define RTL8367C_RX_MIN_SLP_TMR_500M_OFFSET 0 -#define RTL8367C_RX_MIN_SLP_TMR_500M_MASK 0xFF - -#define RTL8367C_REG_EEEP_TMR_100M 0x190f -#define RTL8367C_RX_IDLE_EEEP_100M_OFFSET 8 -#define RTL8367C_RX_IDLE_EEEP_100M_MASK 0xFF00 -#define RTL8367C_RX_MIN_SLP_TMR_100M_OFFSET 0 -#define RTL8367C_RX_MIN_SLP_TMR_100M_MASK 0xFF - -#define RTL8367C_REG_EEEP_RW_500M_MST_SLV 0x1910 -#define RTL8367C_EEEP_RW_500M_MST_OFFSET 8 -#define RTL8367C_EEEP_RW_500M_MST_MASK 0xFF00 -#define RTL8367C_EEEP_RW_500M_SLV_OFFSET 0 -#define RTL8367C_EEEP_RW_500M_SLV_MASK 0xFF - -#define RTL8367C_REG_EEEP_500M_CTRL0 0x1911 -#define RTL8367C_EEEP_500M_CTRL0_OFFSET 0 -#define RTL8367C_EEEP_500M_CTRL0_MASK 0xFF - -#define RTL8367C_REG_EEEP_500M_CTRL1 0x1912 -#define RTL8367C_EEEP_TW_500M_OFFSET 8 -#define RTL8367C_EEEP_TW_500M_MASK 0xFF00 -#define RTL8367C_EEEP_TP_500M_OFFSET 0 -#define RTL8367C_EEEP_TP_500M_MASK 0xFF - -#define RTL8367C_REG_EEEP_500M_CTRL2 0x1913 -#define RTL8367C_EEEP_TXEN_500M_OFFSET 12 -#define RTL8367C_EEEP_TXEN_500M_MASK 0x1000 -#define RTL8367C_EEEP_TU_500M_OFFSET 8 -#define RTL8367C_EEEP_TU_500M_MASK 0x300 -#define RTL8367C_EEEP_TS_500M_OFFSET 0 -#define RTL8367C_EEEP_TS_500M_MASK 0xFF - -#define RTL8367C_REG_EEE_NEW_CTRL0 0x1914 -#define RTL8367C_LINK_UP_DELAY_OFFSET 3 -#define RTL8367C_LINK_UP_DELAY_MASK 0x18 -#define RTL8367C_EEE_TXLPI_ORI_OFFSET 2 -#define RTL8367C_EEE_TXLPI_ORI_MASK 0x4 -#define RTL8367C_REALTX_SEL_OFFSET 1 -#define RTL8367C_REALTX_SEL_MASK 0x2 -#define RTL8367C_EN_FC_EFCT_OFFSET 0 -#define RTL8367C_EN_FC_EFCT_MASK 0x1 - -#define RTL8367C_REG_EEE_LONGIDLE_100M 0x1915 -#define RTL8367C_EEE_LONGIDLE_100M_OFFSET 0 -#define RTL8367C_EEE_LONGIDLE_100M_MASK 0x3FF - -#define RTL8367C_REG_EEE_LONGIDLE_500M 0x1916 -#define RTL8367C_EEE_LONGIDLE_500M_OFFSET 0 -#define RTL8367C_EEE_LONGIDLE_500M_MASK 0x3FF - -#define RTL8367C_REG_EEE_LONGIDLE_GIGA 0x1917 -#define RTL8367C_EEE_LONGIDLE_GIGA_OFFSET 0 -#define RTL8367C_EEE_LONGIDLE_GIGA_MASK 0x3FF - -#define RTL8367C_REG_EEE_MINIPG_100M 0x1918 - -#define RTL8367C_REG_EEE_MINIPG_500M 0x1919 - -#define RTL8367C_REG_EEE_MINIPG_GIGA 0x191A - -#define RTL8367C_REG_EEE_LONGIDLE_CTRL0 0x191B -#define RTL8367C_TX_IDLEN_REQ_100M_OFFSET 10 -#define RTL8367C_TX_IDLEN_REQ_100M_MASK 0x400 -#define RTL8367C_TX_IDLEN_REQ_500M_OFFSET 9 -#define RTL8367C_TX_IDLEN_REQ_500M_MASK 0x200 -#define RTL8367C_TX_IDLEN_REQ_GIGA_OFFSET 8 -#define RTL8367C_TX_IDLEN_REQ_GIGA_MASK 0x100 -#define RTL8367C_EEE_LONGIDLE_CTRL0_TX_LPI_MINIPG_100M_OFFSET 0 -#define RTL8367C_EEE_LONGIDLE_CTRL0_TX_LPI_MINIPG_100M_MASK 0xFF - -#define RTL8367C_REG_EEE_LONGIDLE_CTRL1 0x191C -#define RTL8367C_EEE_LONGIDLE_CTRL1_TX_LPI_MINIPG_GELITE_OFFSET 8 -#define RTL8367C_EEE_LONGIDLE_CTRL1_TX_LPI_MINIPG_GELITE_MASK 0xFF00 -#define RTL8367C_EEE_LONGIDLE_CTRL1_TX_LPI_MINIPG_GIGA_OFFSET 0 -#define RTL8367C_EEE_LONGIDLE_CTRL1_TX_LPI_MINIPG_GIGA_MASK 0xFF - -#define RTL8367C_REG_EEE_TD_CTRL_H 0x191d -#define RTL8367C_REF_RXLPI_OFFSET 8 -#define RTL8367C_REF_RXLPI_MASK 0x100 -#define RTL8367C_LOW_Q_TX_DELAY_GE_500M_H_OFFSET 4 -#define RTL8367C_LOW_Q_TX_DELAY_GE_500M_H_MASK 0xF0 -#define RTL8367C_LOW_Q_TX_DELAY_FE_H_OFFSET 0 -#define RTL8367C_LOW_Q_TX_DELAY_FE_H_MASK 0xF - -/* (16'h1a00)nic_reg */ - -#define RTL8367C_REG_NIC_RXRDRL 0x1a04 -#define RTL8367C_NIC_RXRDRL_OFFSET 0 -#define RTL8367C_NIC_RXRDRL_MASK 0xFF - -#define RTL8367C_REG_NIC_RXRDRH 0x1a05 -#define RTL8367C_NIC_RXRDRH_OFFSET 0 -#define RTL8367C_NIC_RXRDRH_MASK 0xFF - -#define RTL8367C_REG_NIC_TXASRL 0x1a08 -#define RTL8367C_NIC_TXASRL_OFFSET 0 -#define RTL8367C_NIC_TXASRL_MASK 0xFF - -#define RTL8367C_REG_NIC_TXASRH 0x1a09 -#define RTL8367C_NIC_TXASRH_OFFSET 0 -#define RTL8367C_NIC_TXASRH_MASK 0xFF - -#define RTL8367C_REG_NIC_RXCMDR 0x1a0c -#define RTL8367C_NIC_RXCMDR_OFFSET 0 -#define RTL8367C_NIC_RXCMDR_MASK 0x1 - -#define RTL8367C_REG_NIC_TXCMDR 0x1a0d -#define RTL8367C_NIC_TXCMDR_OFFSET 0 -#define RTL8367C_NIC_TXCMDR_MASK 0x1 - -#define RTL8367C_REG_NIC_IMS 0x1a0e -#define RTL8367C_NIC_RXIS_OFFSET 7 -#define RTL8367C_NIC_RXIS_MASK 0x80 -#define RTL8367C_NIC_TXIS_OFFSET 6 -#define RTL8367C_NIC_TXIS_MASK 0x40 -#define RTL8367C_NIC_TXES_OFFSET 5 -#define RTL8367C_NIC_TXES_MASK 0x20 -#define RTL8367C_NIC_IMS_DMY_OFFSET 4 -#define RTL8367C_NIC_IMS_DMY_MASK 0x10 -#define RTL8367C_NIC_RXBUS_OFFSET 3 -#define RTL8367C_NIC_RXBUS_MASK 0x8 -#define RTL8367C_NIC_TXBOS_OFFSET 2 -#define RTL8367C_NIC_TXBOS_MASK 0x4 -#define RTL8367C_NIC_RXMIS_OFFSET 1 -#define RTL8367C_NIC_RXMIS_MASK 0x2 -#define RTL8367C_NIC_TXNLS_OFFSET 0 -#define RTL8367C_NIC_TXNLS_MASK 0x1 - -#define RTL8367C_REG_NIC_IMR 0x1a0f -#define RTL8367C_NIC_RXIE_OFFSET 7 -#define RTL8367C_NIC_RXIE_MASK 0x80 -#define RTL8367C_NIC_TXIE_OFFSET 6 -#define RTL8367C_NIC_TXIE_MASK 0x40 -#define RTL8367C_NIC_TXEE_OFFSET 5 -#define RTL8367C_NIC_TXEE_MASK 0x20 -#define RTL8367C_NIC_IMR_DMY_OFFSET 4 -#define RTL8367C_NIC_IMR_DMY_MASK 0x10 -#define RTL8367C_NIC_RXBUE_OFFSET 3 -#define RTL8367C_NIC_RXBUE_MASK 0x8 -#define RTL8367C_NIC_TXBOE_OFFSET 2 -#define RTL8367C_NIC_TXBOE_MASK 0x4 -#define RTL8367C_NIC_RXMIE_OFFSET 1 -#define RTL8367C_NIC_RXMIE_MASK 0x2 -#define RTL8367C_NIC_TXNLE_OFFSET 0 -#define RTL8367C_NIC_TXNLE_MASK 0x1 - -#define RTL8367C_REG_NIC_RXCR0 0x1a14 -#define RTL8367C_NIC_HFPPE_OFFSET 7 -#define RTL8367C_NIC_HFPPE_MASK 0x80 -#define RTL8367C_NIC_HFMPE_OFFSET 6 -#define RTL8367C_NIC_HFMPE_MASK 0x40 -#define RTL8367C_NIC_RXBPE_OFFSET 5 -#define RTL8367C_NIC_RXBPE_MASK 0x20 -#define RTL8367C_NIC_RXMPE_OFFSET 4 -#define RTL8367C_NIC_RXMPE_MASK 0x10 -#define RTL8367C_NIC_RXPPS_OFFSET 2 -#define RTL8367C_NIC_RXPPS_MASK 0xC -#define RTL8367C_NIC_RXAPE_OFFSET 1 -#define RTL8367C_NIC_RXAPE_MASK 0x2 -#define RTL8367C_NIC_ARPPE_OFFSET 0 -#define RTL8367C_NIC_ARPPE_MASK 0x1 - -#define RTL8367C_REG_NIC_RXCR1 0x1a15 -#define RTL8367C_NIC_RL4CEPE_OFFSET 4 -#define RTL8367C_NIC_RL4CEPE_MASK 0x10 -#define RTL8367C_NIC_RL3CEPE_OFFSET 3 -#define RTL8367C_NIC_RL3CEPE_MASK 0x8 -#define RTL8367C_NIC_RCRCEPE_OFFSET 2 -#define RTL8367C_NIC_RCRCEPE_MASK 0x4 -#define RTL8367C_NIC_RMCRC_OFFSET 1 -#define RTL8367C_NIC_RMCRC_MASK 0x2 -#define RTL8367C_NIC_RXENABLE_OFFSET 0 -#define RTL8367C_NIC_RXENABLE_MASK 0x1 - -#define RTL8367C_REG_NIC_TXCR 0x1a16 -#define RTL8367C_NIC_LBE_OFFSET 2 -#define RTL8367C_NIC_LBE_MASK 0x4 -#define RTL8367C_NIC_TXMFM_OFFSET 1 -#define RTL8367C_NIC_TXMFM_MASK 0x2 -#define RTL8367C_NIC_TXENABLE_OFFSET 0 -#define RTL8367C_NIC_TXENABLE_MASK 0x1 - -#define RTL8367C_REG_NIC_GCR 0x1a17 -#define RTL8367C_DUMMY_7_6_OFFSET 6 -#define RTL8367C_DUMMY_7_6_MASK 0xC0 -#define RTL8367C_NIC_RXMTU_OFFSET 4 -#define RTL8367C_NIC_RXMTU_MASK 0x30 -#define RTL8367C_NIC_GCR_DUMMY_0_OFFSET 0 -#define RTL8367C_NIC_GCR_DUMMY_0_MASK 0x1 - -#define RTL8367C_REG_NIC_MHR0 0x1a24 -#define RTL8367C_NIC_MHR0_OFFSET 0 -#define RTL8367C_NIC_MHR0_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR1 0x1a25 -#define RTL8367C_NIC_MHR1_OFFSET 0 -#define RTL8367C_NIC_MHR1_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR2 0x1a26 -#define RTL8367C_NIC_MHR2_OFFSET 0 -#define RTL8367C_NIC_MHR2_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR3 0x1a27 -#define RTL8367C_NIC_MHR3_OFFSET 0 -#define RTL8367C_NIC_MHR3_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR4 0x1a28 -#define RTL8367C_NIC_MHR4_OFFSET 0 -#define RTL8367C_NIC_MHR4_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR5 0x1a29 -#define RTL8367C_NIC_MHR5_OFFSET 0 -#define RTL8367C_NIC_MHR5_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR6 0x1a2a -#define RTL8367C_NIC_MHR6_OFFSET 0 -#define RTL8367C_NIC_MHR6_MASK 0xFF - -#define RTL8367C_REG_NIC_MHR7 0x1a2b -#define RTL8367C_NIC_MHR7_OFFSET 0 -#define RTL8367C_NIC_MHR7_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR0 0x1a2c -#define RTL8367C_NIC_PAHR0_OFFSET 0 -#define RTL8367C_NIC_PAHR0_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR1 0x1a2d -#define RTL8367C_NIC_PAHR1_OFFSET 0 -#define RTL8367C_NIC_PAHR1_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR2 0x1a2e -#define RTL8367C_NIC_PAHR2_OFFSET 0 -#define RTL8367C_NIC_PAHR2_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR3 0x1a2f -#define RTL8367C_NIC_PAHR3_OFFSET 0 -#define RTL8367C_NIC_PAHR3_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR4 0x1a30 -#define RTL8367C_NIC_PAHR4_OFFSET 0 -#define RTL8367C_NIC_PAHR4_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR5 0x1a31 -#define RTL8367C_NIC_PAHR5_OFFSET 0 -#define RTL8367C_NIC_PAHR5_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR6 0x1a32 -#define RTL8367C_NIC_PAHR6_OFFSET 0 -#define RTL8367C_NIC_PAHR6_MASK 0xFF - -#define RTL8367C_REG_NIC_PAHR7 0x1a33 -#define RTL8367C_NIC_PAHR7_OFFSET 0 -#define RTL8367C_NIC_PAHR7_MASK 0xFF - -#define RTL8367C_REG_NIC_TXSTOPRL 0x1a44 -#define RTL8367C_NIC_TXSTOPRL_OFFSET 0 -#define RTL8367C_NIC_TXSTOPRL_MASK 0xFF - -#define RTL8367C_REG_NIC_TXSTOPRH 0x1a45 -#define RTL8367C_NIC_TXSTOPRH_OFFSET 0 -#define RTL8367C_NIC_TXSTOPRH_MASK 0x3 - -#define RTL8367C_REG_NIC_RXSTOPRL 0x1a46 -#define RTL8367C_NIC_RXSTOPRL_OFFSET 0 -#define RTL8367C_NIC_RXSTOPRL_MASK 0xFF - -#define RTL8367C_REG_NIC_RXSTOPRH 0x1a47 -#define RTL8367C_NIC_RXSTOPRH_OFFSET 0 -#define RTL8367C_NIC_RXSTOPRH_MASK 0x3 - -#define RTL8367C_REG_NIC_RXFSTR 0x1a48 -#define RTL8367C_NIC_RXFSTR_OFFSET 0 -#define RTL8367C_NIC_RXFSTR_MASK 0xFF - -#define RTL8367C_REG_NIC_RXMBTRL 0x1a4c -#define RTL8367C_NIC_RXMBTRL_OFFSET 0 -#define RTL8367C_NIC_RXMBTRL_MASK 0xFF - -#define RTL8367C_REG_NIC_RXMBTRH 0x1a4d -#define RTL8367C_NIC_RXMBTRH_OFFSET 0 -#define RTL8367C_NIC_RXMBTRH_MASK 0x7F - -#define RTL8367C_REG_NIC_RXMPTR 0x1a4e -#define RTL8367C_NIC_RXMPTR_OFFSET 0 -#define RTL8367C_NIC_RXMPTR_MASK 0xFF - -#define RTL8367C_REG_NIC_T0TR 0x1a4f -#define RTL8367C_NIC_T0TR_OFFSET 0 -#define RTL8367C_NIC_T0TR_MASK 0xFF - -#define RTL8367C_REG_NIC_CRXCPRL 0x1a50 -#define RTL8367C_NIC_CRXCPRL_OFFSET 0 -#define RTL8367C_NIC_CRXCPRL_MASK 0xFF - -#define RTL8367C_REG_NIC_CRXCPRH 0x1a51 -#define RTL8367C_NIC_CRXCPRH_OFFSET 0 -#define RTL8367C_NIC_CRXCPRH_MASK 0xFF - -#define RTL8367C_REG_NIC_CTXCPRL 0x1a52 -#define RTL8367C_NIC_CTXCPRL_OFFSET 0 -#define RTL8367C_NIC_CTXCPRL_MASK 0xFF - -#define RTL8367C_REG_NIC_CTXPCRH 0x1a53 -#define RTL8367C_NIC_CTXPCRH_OFFSET 0 -#define RTL8367C_NIC_CTXPCRH_MASK 0xFF - -#define RTL8367C_REG_NIC_SRXCURPKTRL 0x1a54 -#define RTL8367C_NIC_SRXCURPKTRL_OFFSET 0 -#define RTL8367C_NIC_SRXCURPKTRL_MASK 0xFF - -#define RTL8367C_REG_NIC_SRXCURPKTRH 0x1a55 -#define RTL8367C_NIC_SRXCURPKTRH_OFFSET 0 -#define RTL8367C_NIC_SRXCURPKTRH_MASK 0xFF - -#define RTL8367C_REG_NIC_STXCURPKTRL 0x1a56 -#define RTL8367C_NIC_STXCURPKTRL_OFFSET 0 -#define RTL8367C_NIC_STXCURPKTRL_MASK 0xFF - -#define RTL8367C_REG_NIC_STXCURPKTRH 0x1a57 -#define RTL8367C_NIC_STXCURPKTRH_OFFSET 0 -#define RTL8367C_NIC_STXCURPKTRH_MASK 0xFF - -#define RTL8367C_REG_NIC_STXPKTLENRL 0x1a58 -#define RTL8367C_NIC_STXPKTLENRL_OFFSET 0 -#define RTL8367C_NIC_STXPKTLENRL_MASK 0xFF - -#define RTL8367C_REG_NIC_STXPKTLENRH 0x1a59 -#define RTL8367C_NIC_STXPKTLENRH_OFFSET 0 -#define RTL8367C_NIC_STXPKTLENRH_MASK 0xFF - -#define RTL8367C_REG_NIC_STXCURUNITRL 0x1a5a -#define RTL8367C_NIC_STXCURUNITRL_OFFSET 0 -#define RTL8367C_NIC_STXCURUNITRL_MASK 0xFF - -#define RTL8367C_REG_NIC_STXCURUNITRH 0x1a5b -#define RTL8367C_NIC_STXCURUNITRH_OFFSET 0 -#define RTL8367C_NIC_STXCURUNITRH_MASK 0xFF - -#define RTL8367C_REG_NIC_DROP_MODE 0x1a5c -#define RTL8367C_NIC_RXDV_MODE_OFFSET 1 -#define RTL8367C_NIC_RXDV_MODE_MASK 0x2 -#define RTL8367C_NIC_DROP_MODE_OFFSET 0 -#define RTL8367C_NIC_DROP_MODE_MASK 0x1 - -/* (16'h1b00)LED */ - -#define RTL8367C_REG_LED_SYS_CONFIG 0x1b00 -#define RTL8367C_LED_SYS_CONFIG_DUMMY_15_OFFSET 15 -#define RTL8367C_LED_SYS_CONFIG_DUMMY_15_MASK 0x8000 -#define RTL8367C_LED_SERIAL_OUT_MODE_OFFSET 14 -#define RTL8367C_LED_SERIAL_OUT_MODE_MASK 0x4000 -#define RTL8367C_LED_EEE_LPI_MODE_OFFSET 13 -#define RTL8367C_LED_EEE_LPI_MODE_MASK 0x2000 -#define RTL8367C_LED_EEE_LPI_EN_OFFSET 12 -#define RTL8367C_LED_EEE_LPI_EN_MASK 0x1000 -#define RTL8367C_LED_EEE_LPI_10_OFFSET 11 -#define RTL8367C_LED_EEE_LPI_10_MASK 0x800 -#define RTL8367C_LED_EEE_CAP_10_OFFSET 10 -#define RTL8367C_LED_EEE_CAP_10_MASK 0x400 -#define RTL8367C_LED_LPI_SEL_OFFSET 8 -#define RTL8367C_LED_LPI_SEL_MASK 0x300 -#define RTL8367C_SERI_LED_ACT_LOW_OFFSET 7 -#define RTL8367C_SERI_LED_ACT_LOW_MASK 0x80 -#define RTL8367C_LED_POWERON_2_OFFSET 6 -#define RTL8367C_LED_POWERON_2_MASK 0x40 -#define RTL8367C_LED_POWERON_1_OFFSET 5 -#define RTL8367C_LED_POWERON_1_MASK 0x20 -#define RTL8367C_LED_POWERON_0_OFFSET 4 -#define RTL8367C_LED_POWERON_0_MASK 0x10 -#define RTL8367C_LED_IO_DISABLE_OFFSET 3 -#define RTL8367C_LED_IO_DISABLE_MASK 0x8 -#define RTL8367C_DUMMY_2_2_OFFSET 2 -#define RTL8367C_DUMMY_2_2_MASK 0x4 -#define RTL8367C_LED_SELECT_OFFSET 0 -#define RTL8367C_LED_SELECT_MASK 0x3 - -#define RTL8367C_REG_LED_SYS_CONFIG2 0x1b01 -#define RTL8367C_LED_SYS_CONFIG2_DUMMY_OFFSET 2 -#define RTL8367C_LED_SYS_CONFIG2_DUMMY_MASK 0xFFFC -#define RTL8367C_GATE_LPTD_BYPASS_OFFSET 1 -#define RTL8367C_GATE_LPTD_BYPASS_MASK 0x2 -#define RTL8367C_LED_SPD_MODE_OFFSET 0 -#define RTL8367C_LED_SPD_MODE_MASK 0x1 - -#define RTL8367C_REG_LED_MODE 0x1b02 -#define RTL8367C_DLINK_TIME_OFFSET 15 -#define RTL8367C_DLINK_TIME_MASK 0x8000 -#define RTL8367C_LED_BUZZ_DUTY_OFFSET 14 -#define RTL8367C_LED_BUZZ_DUTY_MASK 0x4000 -#define RTL8367C_BUZZER_RATE_OFFSET 12 -#define RTL8367C_BUZZER_RATE_MASK 0x3000 -#define RTL8367C_LOOP_DETECT_MODE_OFFSET 11 -#define RTL8367C_LOOP_DETECT_MODE_MASK 0x800 -#define RTL8367C_SEL_PWRON_TIME_OFFSET 9 -#define RTL8367C_SEL_PWRON_TIME_MASK 0x600 -#define RTL8367C_EN_DLINK_LED_OFFSET 8 -#define RTL8367C_EN_DLINK_LED_MASK 0x100 -#define RTL8367C_LOOP_DETECT_RATE_OFFSET 6 -#define RTL8367C_LOOP_DETECT_RATE_MASK 0xC0 -#define RTL8367C_FORCE_RATE_OFFSET 4 -#define RTL8367C_FORCE_RATE_MASK 0x30 -#define RTL8367C_SEL_LEDRATE_OFFSET 1 -#define RTL8367C_SEL_LEDRATE_MASK 0xE -#define RTL8367C_SPEED_UP_OFFSET 0 -#define RTL8367C_SPEED_UP_MASK 0x1 - -#define RTL8367C_REG_LED_CONFIGURATION 0x1b03 -#define RTL8367C_LED_CONFIGURATION_DUMMY_OFFSET 15 -#define RTL8367C_LED_CONFIGURATION_DUMMY_MASK 0x8000 -#define RTL8367C_LED_CONFIG_SEL_OFFSET 14 -#define RTL8367C_LED_CONFIG_SEL_MASK 0x4000 -#define RTL8367C_DATA_LED_OFFSET 12 -#define RTL8367C_DATA_LED_MASK 0x3000 -#define RTL8367C_LED2_CFG_OFFSET 8 -#define RTL8367C_LED2_CFG_MASK 0xF00 -#define RTL8367C_LED1_CFG_OFFSET 4 -#define RTL8367C_LED1_CFG_MASK 0xF0 -#define RTL8367C_LED0_CFG_OFFSET 0 -#define RTL8367C_LED0_CFG_MASK 0xF - -#define RTL8367C_REG_RTCT_RESULTS_CFG 0x1b04 -#define RTL8367C_RTCT_2PAIR_FTT_OFFSET 15 -#define RTL8367C_RTCT_2PAIR_FTT_MASK 0x8000 -#define RTL8367C_RTCT_2PAIR_MODE_OFFSET 14 -#define RTL8367C_RTCT_2PAIR_MODE_MASK 0x4000 -#define RTL8367C_BLINK_EN_OFFSET 13 -#define RTL8367C_BLINK_EN_MASK 0x2000 -#define RTL8367C_TIMEOUT_OFFSET 12 -#define RTL8367C_TIMEOUT_MASK 0x1000 -#define RTL8367C_EN_CD_SAME_SHORT_OFFSET 11 -#define RTL8367C_EN_CD_SAME_SHORT_MASK 0x800 -#define RTL8367C_EN_CD_SAME_OPEN_OFFSET 10 -#define RTL8367C_EN_CD_SAME_OPEN_MASK 0x400 -#define RTL8367C_EN_CD_SAME_LINEDRIVER_OFFSET 9 -#define RTL8367C_EN_CD_SAME_LINEDRIVER_MASK 0x200 -#define RTL8367C_EN_CD_SAME_MISMATCH_OFFSET 8 -#define RTL8367C_EN_CD_SAME_MISMATCH_MASK 0x100 -#define RTL8367C_EN_CD_SHORT_OFFSET 7 -#define RTL8367C_EN_CD_SHORT_MASK 0x80 -#define RTL8367C_EN_AB_SHORT_OFFSET 6 -#define RTL8367C_EN_AB_SHORT_MASK 0x40 -#define RTL8367C_EN_CD_OPEN_OFFSET 5 -#define RTL8367C_EN_CD_OPEN_MASK 0x20 -#define RTL8367C_EN_AB_OPEN_OFFSET 4 -#define RTL8367C_EN_AB_OPEN_MASK 0x10 -#define RTL8367C_EN_CD_MISMATCH_OFFSET 3 -#define RTL8367C_EN_CD_MISMATCH_MASK 0x8 -#define RTL8367C_EN_AB_MISMATCH_OFFSET 2 -#define RTL8367C_EN_AB_MISMATCH_MASK 0x4 -#define RTL8367C_EN_CD_LINEDRIVER_OFFSET 1 -#define RTL8367C_EN_CD_LINEDRIVER_MASK 0x2 -#define RTL8367C_EN_AB_LINEDRIVER_OFFSET 0 -#define RTL8367C_EN_AB_LINEDRIVER_MASK 0x1 - -#define RTL8367C_REG_RTCT_LED 0x1b05 -#define RTL8367C_DUMMY_1b05a_OFFSET 12 -#define RTL8367C_DUMMY_1b05a_MASK 0xF000 -#define RTL8367C_RTCT_LED2_OFFSET 8 -#define RTL8367C_RTCT_LED2_MASK 0xF00 -#define RTL8367C_RTCT_LED1_OFFSET 4 -#define RTL8367C_RTCT_LED1_MASK 0xF0 -#define RTL8367C_RTCT_LED0_OFFSET 0 -#define RTL8367C_RTCT_LED0_MASK 0xF - -#define RTL8367C_REG_CPU_FORCE_LED_CFG 0x1b07 -#define RTL8367C_DUMMY_1b07a_OFFSET 8 -#define RTL8367C_DUMMY_1b07a_MASK 0xFF00 -#define RTL8367C_LED_FORCE_MODE_OFFSET 2 -#define RTL8367C_LED_FORCE_MODE_MASK 0xFC -#define RTL8367C_FORCE_MODE_OFFSET 0 -#define RTL8367C_FORCE_MODE_MASK 0x3 - -#define RTL8367C_REG_CPU_FORCE_LED0_CFG0 0x1b08 -#define RTL8367C_PORT7_LED0_MODE_OFFSET 14 -#define RTL8367C_PORT7_LED0_MODE_MASK 0xC000 -#define RTL8367C_PORT6_LED0_MODE_OFFSET 12 -#define RTL8367C_PORT6_LED0_MODE_MASK 0x3000 -#define RTL8367C_PORT5_LED0_MODE_OFFSET 10 -#define RTL8367C_PORT5_LED0_MODE_MASK 0xC00 -#define RTL8367C_PORT4_LED0_MODE_OFFSET 8 -#define RTL8367C_PORT4_LED0_MODE_MASK 0x300 -#define RTL8367C_PORT3_LED0_MODE_OFFSET 6 -#define RTL8367C_PORT3_LED0_MODE_MASK 0xC0 -#define RTL8367C_PORT2_LED0_MODE_OFFSET 4 -#define RTL8367C_PORT2_LED0_MODE_MASK 0x30 -#define RTL8367C_PORT1_LED0_MODE_OFFSET 2 -#define RTL8367C_PORT1_LED0_MODE_MASK 0xC -#define RTL8367C_PORT0_LED0_MODE_OFFSET 0 -#define RTL8367C_PORT0_LED0_MODE_MASK 0x3 - -#define RTL8367C_REG_CPU_FORCE_LED0_CFG1 0x1b09 -#define RTL8367C_DUMMY_1b09a_OFFSET 4 -#define RTL8367C_DUMMY_1b09a_MASK 0xFFF0 -#define RTL8367C_PORT9_LED0_MODE_OFFSET 2 -#define RTL8367C_PORT9_LED0_MODE_MASK 0xC -#define RTL8367C_PORT8_LED0_MODE_OFFSET 0 -#define RTL8367C_PORT8_LED0_MODE_MASK 0x3 - -#define RTL8367C_REG_CPU_FORCE_LED1_CFG0 0x1b0a -#define RTL8367C_PORT7_LED1_MODE_OFFSET 14 -#define RTL8367C_PORT7_LED1_MODE_MASK 0xC000 -#define RTL8367C_PORT6_LED1_MODE_OFFSET 12 -#define RTL8367C_PORT6_LED1_MODE_MASK 0x3000 -#define RTL8367C_PORT5_LED1_MODE_OFFSET 10 -#define RTL8367C_PORT5_LED1_MODE_MASK 0xC00 -#define RTL8367C_PORT4_LED1_MODE_OFFSET 8 -#define RTL8367C_PORT4_LED1_MODE_MASK 0x300 -#define RTL8367C_PORT3_LED1_MODE_OFFSET 6 -#define RTL8367C_PORT3_LED1_MODE_MASK 0xC0 -#define RTL8367C_PORT2_LED1_MODE_OFFSET 4 -#define RTL8367C_PORT2_LED1_MODE_MASK 0x30 -#define RTL8367C_PORT1_LED1_MODE_OFFSET 2 -#define RTL8367C_PORT1_LED1_MODE_MASK 0xC -#define RTL8367C_PORT0_LED1_MODE_OFFSET 0 -#define RTL8367C_PORT0_LED1_MODE_MASK 0x3 - -#define RTL8367C_REG_CPU_FORCE_LED1_CFG1 0x1b0b -#define RTL8367C_DUMMY_1b0ba_OFFSET 4 -#define RTL8367C_DUMMY_1b0ba_MASK 0xFFF0 -#define RTL8367C_PORT9_LED1_MODE_OFFSET 2 -#define RTL8367C_PORT9_LED1_MODE_MASK 0xC -#define RTL8367C_PORT8_LED1_MODE_OFFSET 0 -#define RTL8367C_PORT8_LED1_MODE_MASK 0x3 - -#define RTL8367C_REG_CPU_FORCE_LED2_CFG0 0x1b0c -#define RTL8367C_PORT7_LED2_MODE_OFFSET 14 -#define RTL8367C_PORT7_LED2_MODE_MASK 0xC000 -#define RTL8367C_PORT6_LED2_MODE_OFFSET 12 -#define RTL8367C_PORT6_LED2_MODE_MASK 0x3000 -#define RTL8367C_PORT5_LED2_MODE_OFFSET 10 -#define RTL8367C_PORT5_LED2_MODE_MASK 0xC00 -#define RTL8367C_PORT4_LED2_MODE_OFFSET 8 -#define RTL8367C_PORT4_LED2_MODE_MASK 0x300 -#define RTL8367C_PORT3_LED2_MODE_OFFSET 6 -#define RTL8367C_PORT3_LED2_MODE_MASK 0xC0 -#define RTL8367C_PORT2_LED2_MODE_OFFSET 4 -#define RTL8367C_PORT2_LED2_MODE_MASK 0x30 -#define RTL8367C_PORT1_LED2_MODE_OFFSET 2 -#define RTL8367C_PORT1_LED2_MODE_MASK 0xC -#define RTL8367C_PORT0_LED2_MODE_OFFSET 0 -#define RTL8367C_PORT0_LED2_MODE_MASK 0x3 - -#define RTL8367C_REG_CPU_FORCE_LED2_CFG1 0x1b0d -#define RTL8367C_DUMMY_1b0da_OFFSET 4 -#define RTL8367C_DUMMY_1b0da_MASK 0xFFF0 -#define RTL8367C_PORT9_LED2_MODE_OFFSET 2 -#define RTL8367C_PORT9_LED2_MODE_MASK 0xC -#define RTL8367C_PORT8_LED2_MODE_OFFSET 0 -#define RTL8367C_PORT8_LED2_MODE_MASK 0x3 - -#define RTL8367C_REG_LED_ACTIVE_LOW_CFG0 0x1b0e -#define RTL8367C_LED_ACTIVE_LOW_CFG0_DUMMY_15_OFFSET 15 -#define RTL8367C_LED_ACTIVE_LOW_CFG0_DUMMY_15_MASK 0x8000 -#define RTL8367C_PORT3_LED_ACTIVE_LOW_OFFSET 12 -#define RTL8367C_PORT3_LED_ACTIVE_LOW_MASK 0x7000 -#define RTL8367C_LED_ACTIVE_LOW_CFG0_DUMMY_11_OFFSET 11 -#define RTL8367C_LED_ACTIVE_LOW_CFG0_DUMMY_11_MASK 0x800 -#define RTL8367C_PORT2_LED_ACTIVE_LOW_OFFSET 8 -#define RTL8367C_PORT2_LED_ACTIVE_LOW_MASK 0x700 -#define RTL8367C_DUMMY_7_OFFSET 7 -#define RTL8367C_DUMMY_7_MASK 0x80 -#define RTL8367C_PORT1_LED_ACTIVE_LOW_OFFSET 4 -#define RTL8367C_PORT1_LED_ACTIVE_LOW_MASK 0x70 -#define RTL8367C_DUMMY_3_OFFSET 3 -#define RTL8367C_DUMMY_3_MASK 0x8 -#define RTL8367C_PORT0_LED_ACTIVE_LOW_OFFSET 0 -#define RTL8367C_PORT0_LED_ACTIVE_LOW_MASK 0x7 - -#define RTL8367C_REG_LED_ACTIVE_LOW_CFG1 0x1b0f -#define RTL8367C_LED_ACTIVE_LOW_CFG1_DUMMY_15_OFFSET 15 -#define RTL8367C_LED_ACTIVE_LOW_CFG1_DUMMY_15_MASK 0x8000 -#define RTL8367C_PORT7_LED_ACTIVE_LOW_OFFSET 12 -#define RTL8367C_PORT7_LED_ACTIVE_LOW_MASK 0x7000 -#define RTL8367C_LED_ACTIVE_LOW_CFG1_DUMMY_11_OFFSET 11 -#define RTL8367C_LED_ACTIVE_LOW_CFG1_DUMMY_11_MASK 0x800 -#define RTL8367C_PORT6_LED_ACTIVE_LOW_OFFSET 8 -#define RTL8367C_PORT6_LED_ACTIVE_LOW_MASK 0x700 -#define RTL8367C_DUMMY_1b0f_b_OFFSET 7 -#define RTL8367C_DUMMY_1b0f_b_MASK 0x80 -#define RTL8367C_PORT5_LED_ACTIVE_LOW_OFFSET 4 -#define RTL8367C_PORT5_LED_ACTIVE_LOW_MASK 0x70 -#define RTL8367C_DUMMY_1b0f_a_OFFSET 3 -#define RTL8367C_DUMMY_1b0f_a_MASK 0x8 -#define RTL8367C_PORT4_LED_ACTIVE_LOW_OFFSET 0 -#define RTL8367C_PORT4_LED_ACTIVE_LOW_MASK 0x7 - -#define RTL8367C_REG_LED_ACTIVE_LOW_CFG2 0x1b10 -#define RTL8367C_DUMMY_1b10_b_OFFSET 7 -#define RTL8367C_DUMMY_1b10_b_MASK 0xFF80 -#define RTL8367C_PORT9_LED_ACTIVE_LOW_OFFSET 4 -#define RTL8367C_PORT9_LED_ACTIVE_LOW_MASK 0x70 -#define RTL8367C_DUMMY_1b10_a_OFFSET 3 -#define RTL8367C_DUMMY_1b10_a_MASK 0x8 -#define RTL8367C_PORT8_LED_ACTIVE_LOW_OFFSET 0 -#define RTL8367C_PORT8_LED_ACTIVE_LOW_MASK 0x7 - -#define RTL8367C_REG_SEL_RTCT_PARA 0x1b21 -#define RTL8367C_DO_RTCT_COMMAND_OFFSET 15 -#define RTL8367C_DO_RTCT_COMMAND_MASK 0x8000 -#define RTL8367C_SEL_RTCT_PARA_DUMMY_OFFSET 12 -#define RTL8367C_SEL_RTCT_PARA_DUMMY_MASK 0x7000 -#define RTL8367C_SEL_RTCT_RLSTLED_TIME_OFFSET 10 -#define RTL8367C_SEL_RTCT_RLSTLED_TIME_MASK 0xC00 -#define RTL8367C_SEL_RTCT_TEST_LED_TIME_OFFSET 8 -#define RTL8367C_SEL_RTCT_TEST_LED_TIME_MASK 0x300 -#define RTL8367C_EN_SCAN_RTCT_OFFSET 7 -#define RTL8367C_EN_SCAN_RTCT_MASK 0x80 -#define RTL8367C_EN_RTCT_TIMOUT_OFFSET 6 -#define RTL8367C_EN_RTCT_TIMOUT_MASK 0x40 -#define RTL8367C_EN_ALL_RTCT_OFFSET 5 -#define RTL8367C_EN_ALL_RTCT_MASK 0x20 -#define RTL8367C_SEL_RTCT_PLE_WID_OFFSET 0 -#define RTL8367C_SEL_RTCT_PLE_WID_MASK 0x1F - -#define RTL8367C_REG_RTCT_ENABLE 0x1b22 -#define RTL8367C_RTCT_ENABLE_DUMMY_OFFSET 8 -#define RTL8367C_RTCT_ENABLE_DUMMY_MASK 0xFF00 -#define RTL8367C_RTCT_ENABLE_PORT_MASK_OFFSET 0 -#define RTL8367C_RTCT_ENABLE_PORT_MASK_MASK 0xFF - -#define RTL8367C_REG_RTCT_TIMEOUT 0x1b23 - -#define RTL8367C_REG_PARA_LED_IO_EN1 0x1b24 -#define RTL8367C_LED1_PARA_P07_00_OFFSET 8 -#define RTL8367C_LED1_PARA_P07_00_MASK 0xFF00 -#define RTL8367C_LED0_PARA_P07_00_OFFSET 0 -#define RTL8367C_LED0_PARA_P07_00_MASK 0xFF - -#define RTL8367C_REG_PARA_LED_IO_EN2 0x1b25 -#define RTL8367C_DUMMY_15_8_OFFSET 8 -#define RTL8367C_DUMMY_15_8_MASK 0xFF00 -#define RTL8367C_LED2_PARA_P07_00_OFFSET 0 -#define RTL8367C_LED2_PARA_P07_00_MASK 0xFF - -#define RTL8367C_REG_SCAN0_LED_IO_EN1 0x1b26 -#define RTL8367C_SCAN0_LED_IO_EN1_DUMMY_OFFSET 3 -#define RTL8367C_SCAN0_LED_IO_EN1_DUMMY_MASK 0xFFF8 -#define RTL8367C_LED_LOOP_DET_BUZZER_EN_OFFSET 2 -#define RTL8367C_LED_LOOP_DET_BUZZER_EN_MASK 0x4 -#define RTL8367C_LED_SERI_DATA_EN_OFFSET 1 -#define RTL8367C_LED_SERI_DATA_EN_MASK 0x2 -#define RTL8367C_LED_SERI_CLK_EN_OFFSET 0 -#define RTL8367C_LED_SERI_CLK_EN_MASK 0x1 - -#define RTL8367C_REG_SCAN1_LED_IO_EN2 0x1b27 -#define RTL8367C_LED_SCAN1_BI_PORT_EN_OFFSET 8 -#define RTL8367C_LED_SCAN1_BI_PORT_EN_MASK 0xFF00 -#define RTL8367C_LED_SCAN1_BI_STA_EN_OFFSET 7 -#define RTL8367C_LED_SCAN1_BI_STA_EN_MASK 0x80 -#define RTL8367C_SCAN1_LED_IO_EN2_DUMMY_0_OFFSET 6 -#define RTL8367C_SCAN1_LED_IO_EN2_DUMMY_0_MASK 0x40 -#define RTL8367C_LED_SCAN1_SI_PORT_EN_OFFSET 2 -#define RTL8367C_LED_SCAN1_SI_PORT_EN_MASK 0x3C -#define RTL8367C_LED_SCAN1_SI_STA_EN_OFFSET 0 -#define RTL8367C_LED_SCAN1_SI_STA_EN_MASK 0x3 - -#define RTL8367C_REG_LPI_LED_OPT1 0x1b28 -#define RTL8367C_LPI_TAG4_OFFSET 12 -#define RTL8367C_LPI_TAG4_MASK 0xF000 -#define RTL8367C_LPI_TAG3_OFFSET 8 -#define RTL8367C_LPI_TAG3_MASK 0xF00 -#define RTL8367C_LPI_TAG2_OFFSET 4 -#define RTL8367C_LPI_TAG2_MASK 0xF0 -#define RTL8367C_LPI_TAG1_OFFSET 0 -#define RTL8367C_LPI_TAG1_MASK 0xF - -#define RTL8367C_REG_LPI_LED_OPT2 0x1b29 -#define RTL8367C_LPI_LED_OPT2_DUMMY_OFFSET 15 -#define RTL8367C_LPI_LED_OPT2_DUMMY_MASK 0x8000 -#define RTL8367C_LPI_LED2_WEAK_OFFSET 14 -#define RTL8367C_LPI_LED2_WEAK_MASK 0x4000 -#define RTL8367C_LPI_LED1_WEAK_OFFSET 13 -#define RTL8367C_LPI_LED1_WEAK_MASK 0x2000 -#define RTL8367C_LPI_LED0_WEAK_OFFSET 12 -#define RTL8367C_LPI_LED0_WEAK_MASK 0x1000 -#define RTL8367C_LPI_LED2_OFFSET 11 -#define RTL8367C_LPI_LED2_MASK 0x800 -#define RTL8367C_LPI_LED1_OFFSET 10 -#define RTL8367C_LPI_LED1_MASK 0x400 -#define RTL8367C_LPI_LED0_OFFSET 9 -#define RTL8367C_LPI_LED0_MASK 0x200 -#define RTL8367C_LPI_TAG8_OFFSET 8 -#define RTL8367C_LPI_TAG8_MASK 0x100 -#define RTL8367C_LPI_TAG7_OFFSET 6 -#define RTL8367C_LPI_TAG7_MASK 0xC0 -#define RTL8367C_LPI_TAG6_OFFSET 4 -#define RTL8367C_LPI_TAG6_MASK 0x30 -#define RTL8367C_LPI_TAG5_OFFSET 0 -#define RTL8367C_LPI_TAG5_MASK 0xF - -#define RTL8367C_REG_LPI_LED_OPT3 0x1b2a -#define RTL8367C_LPI_LED_OPT3_DUMMY_OFFSET 3 -#define RTL8367C_LPI_LED_OPT3_DUMMY_MASK 0xFFF8 -#define RTL8367C_RESTORE_LED_RATE_SEL_OFFSET 1 -#define RTL8367C_RESTORE_LED_RATE_SEL_MASK 0x6 -#define RTL8367C_RESTORE_LED_SEL_OFFSET 0 -#define RTL8367C_RESTORE_LED_SEL_MASK 0x1 - -#define RTL8367C_REG_P0_LED_MUX 0x1b2b -#define RTL8367C_CFG_P0_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P0_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P0_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P0_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P0_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P0_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P1_LED_MUX 0x1b2c -#define RTL8367C_CFG_P1_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P1_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P1_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P1_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P1_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P1_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P2_LED_MUX 0x1b2d -#define RTL8367C_CFG_P2_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P2_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P2_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P2_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P2_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P2_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P3_LED_MUX 0x1b2e -#define RTL8367C_CFG_P3_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P3_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P3_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P3_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P3_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P3_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P4_LED_MUX 0x1b2f -#define RTL8367C_CFG_P4_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P4_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P4_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P4_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P4_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P4_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_LED0_DATA_CTRL 0x1b30 -#define RTL8367C_CFG_DATA_LED0_SEL_OFFSET 6 -#define RTL8367C_CFG_DATA_LED0_SEL_MASK 0x40 -#define RTL8367C_CFG_DATA_LED0_ACT_OFFSET 4 -#define RTL8367C_CFG_DATA_LED0_ACT_MASK 0x30 -#define RTL8367C_CFG_DATA_LED0_SPD_OFFSET 0 -#define RTL8367C_CFG_DATA_LED0_SPD_MASK 0xF - -#define RTL8367C_REG_LED1_DATA_CTRL 0x1b31 -#define RTL8367C_CFG_DATA_LED1_SEL_OFFSET 6 -#define RTL8367C_CFG_DATA_LED1_SEL_MASK 0x40 -#define RTL8367C_CFG_DATA_LED1_ACT_OFFSET 4 -#define RTL8367C_CFG_DATA_LED1_ACT_MASK 0x30 -#define RTL8367C_CFG_DATA_LED1_SPD_OFFSET 0 -#define RTL8367C_CFG_DATA_LED1_SPD_MASK 0xF - -#define RTL8367C_REG_LED2_DATA_CTRL 0x1b32 -#define RTL8367C_CFG_DATA_LED2_SEL_OFFSET 6 -#define RTL8367C_CFG_DATA_LED2_SEL_MASK 0x40 -#define RTL8367C_CFG_DATA_LED2_ACT_OFFSET 4 -#define RTL8367C_CFG_DATA_LED2_ACT_MASK 0x30 -#define RTL8367C_CFG_DATA_LED2_SPD_OFFSET 0 -#define RTL8367C_CFG_DATA_LED2_SPD_MASK 0xF - -#define RTL8367C_REG_PARA_LED_IO_EN3 0x1b33 -#define RTL8367C_dummy_1b33a_OFFSET 6 -#define RTL8367C_dummy_1b33a_MASK 0xFFC0 -#define RTL8367C_LED2_PARA_P09_08_OFFSET 4 -#define RTL8367C_LED2_PARA_P09_08_MASK 0x30 -#define RTL8367C_LED1_PARA_P09_08_OFFSET 2 -#define RTL8367C_LED1_PARA_P09_08_MASK 0xC -#define RTL8367C_LED0_PARA_P09_08_OFFSET 0 -#define RTL8367C_LED0_PARA_P09_08_MASK 0x3 - -#define RTL8367C_REG_SCAN1_LED_IO_EN3 0x1b34 -#define RTL8367C_dummy_1b34a_OFFSET 3 -#define RTL8367C_dummy_1b34a_MASK 0xFFF8 -#define RTL8367C_LED_SCAN1_BI_PORT9_8_EN_OFFSET 1 -#define RTL8367C_LED_SCAN1_BI_PORT9_8_EN_MASK 0x6 -#define RTL8367C_LED_SCAN1_SI_PORT9_8_EN_OFFSET 0 -#define RTL8367C_LED_SCAN1_SI_PORT9_8_EN_MASK 0x1 - -#define RTL8367C_REG_P5_LED_MUX 0x1b35 -#define RTL8367C_CFG_P5_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P5_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P5_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P5_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P5_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P5_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P6_LED_MUX 0x1b36 -#define RTL8367C_CFG_P6_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P6_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P6_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P6_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P6_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P6_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P7_LED_MUX 0x1b37 -#define RTL8367C_CFG_P7_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P7_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P7_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P7_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P7_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P7_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P8_LED_MUX 0x1b38 -#define RTL8367C_CFG_P8_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P8_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P8_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P8_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P8_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P8_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_P9_LED_MUX 0x1b39 -#define RTL8367C_CFG_P9_LED2_MUX_OFFSET 10 -#define RTL8367C_CFG_P9_LED2_MUX_MASK 0x7C00 -#define RTL8367C_CFG_P9_LED1_MUX_OFFSET 5 -#define RTL8367C_CFG_P9_LED1_MUX_MASK 0x3E0 -#define RTL8367C_CFG_P9_LED0_MUX_OFFSET 0 -#define RTL8367C_CFG_P9_LED0_MUX_MASK 0x1F - -#define RTL8367C_REG_SERIAL_LED_CTRL 0x1b3a -#define RTL8367C_SERIAL_LED_SHIFT_SEQUENCE_OFFSET 13 -#define RTL8367C_SERIAL_LED_SHIFT_SEQUENCE_MASK 0x6000 -#define RTL8367C_SERIAL_LED_SHIFT_SEQUENCE_EN_OFFSET 12 -#define RTL8367C_SERIAL_LED_SHIFT_SEQUENCE_EN_MASK 0x1000 -#define RTL8367C_SERIAL_LED_GROUP_NUM_OFFSET 10 -#define RTL8367C_SERIAL_LED_GROUP_NUM_MASK 0xC00 -#define RTL8367C_SERIAL_LED_PORT_EN_OFFSET 0 -#define RTL8367C_SERIAL_LED_PORT_EN_MASK 0x3FF - -/* (16'h1c00)IGMP_EAV */ - -#define RTL8367C_REG_IGMP_MLD_CFG0 0x1c00 -#define RTL8367C_IGMP_MLD_PORTISO_LEAKY_OFFSET 15 -#define RTL8367C_IGMP_MLD_PORTISO_LEAKY_MASK 0x8000 -#define RTL8367C_IGMP_MLD_VLAN_LEAKY_OFFSET 14 -#define RTL8367C_IGMP_MLD_VLAN_LEAKY_MASK 0x4000 -#define RTL8367C_IGMP_MLD_DISCARD_STORM_FILTER_OFFSET 13 -#define RTL8367C_IGMP_MLD_DISCARD_STORM_FILTER_MASK 0x2000 -#define RTL8367C_REPORT_FORWARD_OFFSET 12 -#define RTL8367C_REPORT_FORWARD_MASK 0x1000 -#define RTL8367C_ROBURSTNESS_VAR_OFFSET 9 -#define RTL8367C_ROBURSTNESS_VAR_MASK 0xE00 -#define RTL8367C_LEAVE_SUPPRESSION_OFFSET 8 -#define RTL8367C_LEAVE_SUPPRESSION_MASK 0x100 -#define RTL8367C_REPORT_SUPPRESSION_OFFSET 7 -#define RTL8367C_REPORT_SUPPRESSION_MASK 0x80 -#define RTL8367C_LEAVE_TIMER_OFFSET 4 -#define RTL8367C_LEAVE_TIMER_MASK 0x70 -#define RTL8367C_FAST_LEAVE_EN_OFFSET 3 -#define RTL8367C_FAST_LEAVE_EN_MASK 0x8 -#define RTL8367C_CKS_ERR_OP_OFFSET 1 -#define RTL8367C_CKS_ERR_OP_MASK 0x6 -#define RTL8367C_IGMP_MLD_EN_OFFSET 0 -#define RTL8367C_IGMP_MLD_EN_MASK 0x1 - -#define RTL8367C_REG_IGMP_MLD_CFG1 0x1c01 -#define RTL8367C_DROP_LEAVE_ZERO_OFFSET 2 -#define RTL8367C_DROP_LEAVE_ZERO_MASK 0x4 -#define RTL8367C_TABLE_FULL_OP_OFFSET 0 -#define RTL8367C_TABLE_FULL_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_MLD_CFG2 0x1c02 - -#define RTL8367C_REG_IGMP_DYNAMIC_ROUTER_PORT 0x1c03 -#define RTL8367C_D_ROUTER_PORT_2_OFFSET 11 -#define RTL8367C_D_ROUTER_PORT_2_MASK 0x7800 -#define RTL8367C_D_ROUTER_PORT_TMR_2_OFFSET 8 -#define RTL8367C_D_ROUTER_PORT_TMR_2_MASK 0x700 -#define RTL8367C_D_ROUTER_PORT_1_OFFSET 3 -#define RTL8367C_D_ROUTER_PORT_1_MASK 0x78 -#define RTL8367C_D_ROUTER_PORT_TMR_1_OFFSET 0 -#define RTL8367C_D_ROUTER_PORT_TMR_1_MASK 0x7 - -#define RTL8367C_REG_IGMP_STATIC_ROUTER_PORT 0x1c04 -#define RTL8367C_IGMP_STATIC_ROUTER_PORT_OFFSET 0 -#define RTL8367C_IGMP_STATIC_ROUTER_PORT_MASK 0x7FF - -#define RTL8367C_REG_IGMP_PORT0_CONTROL 0x1c05 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT0_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT0_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT0_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT0_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT0_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT0_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT0_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT0_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT0_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT0_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT1_CONTROL 0x1c06 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT1_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT1_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT1_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT1_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT1_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT1_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT1_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT1_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT1_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT1_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT1_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT2_CONTROL 0x1c07 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT2_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT2_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT2_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT2_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT2_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT2_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT2_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT2_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT2_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT2_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT2_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT3_CONTROL 0x1c08 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT3_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT3_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT3_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT3_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT3_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT3_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT3_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT3_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT3_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT3_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT3_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT4_CONTROL 0x1c09 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT4_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT4_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT4_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT4_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT4_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT4_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT4_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT4_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT4_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT4_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT4_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT5_CONTROL 0x1c0a -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT5_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT5_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT5_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT5_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT5_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT5_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT5_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT5_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT5_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT5_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT5_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT6_CONTROL 0x1c0b -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT6_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT6_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT6_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT6_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT6_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT6_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT6_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT6_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT6_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT6_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT6_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT7_CONTROL 0x1c0c -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT7_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT7_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT7_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT7_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT7_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT7_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT7_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT7_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT7_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT7_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT7_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT01_MAX_GROUP 0x1c0d -#define RTL8367C_PORT1_MAX_GROUP_OFFSET 8 -#define RTL8367C_PORT1_MAX_GROUP_MASK 0xFF00 -#define RTL8367C_PORT0_MAX_GROUP_OFFSET 0 -#define RTL8367C_PORT0_MAX_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT23_MAX_GROUP 0x1c0e -#define RTL8367C_PORT3_MAX_GROUP_OFFSET 8 -#define RTL8367C_PORT3_MAX_GROUP_MASK 0xFF00 -#define RTL8367C_PORT2_MAX_GROUP_OFFSET 0 -#define RTL8367C_PORT2_MAX_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT45_MAX_GROUP 0x1c0f -#define RTL8367C_PORT5_MAX_GROUP_OFFSET 8 -#define RTL8367C_PORT5_MAX_GROUP_MASK 0xFF00 -#define RTL8367C_PORT4_MAX_GROUP_OFFSET 0 -#define RTL8367C_PORT4_MAX_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT67_MAX_GROUP 0x1c10 -#define RTL8367C_PORT7_MAX_GROUP_OFFSET 8 -#define RTL8367C_PORT7_MAX_GROUP_MASK 0xFF00 -#define RTL8367C_PORT6_MAX_GROUP_OFFSET 0 -#define RTL8367C_PORT6_MAX_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT01_CURRENT_GROUP 0x1c11 -#define RTL8367C_PORT1_CURRENT_GROUP_OFFSET 8 -#define RTL8367C_PORT1_CURRENT_GROUP_MASK 0xFF00 -#define RTL8367C_PORT0_CURRENT_GROUP_OFFSET 0 -#define RTL8367C_PORT0_CURRENT_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT23_CURRENT_GROUP 0x1c12 -#define RTL8367C_PORT3_CURRENT_GROUP_OFFSET 8 -#define RTL8367C_PORT3_CURRENT_GROUP_MASK 0xFF00 -#define RTL8367C_PORT2_CURRENT_GROUP_OFFSET 0 -#define RTL8367C_PORT2_CURRENT_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT45_CURRENT_GROUP 0x1c13 -#define RTL8367C_PORT5_CURRENT_GROUP_OFFSET 8 -#define RTL8367C_PORT5_CURRENT_GROUP_MASK 0xFF00 -#define RTL8367C_PORT4_CURRENT_GROUP_OFFSET 0 -#define RTL8367C_PORT4_CURRENT_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT67_CURRENT_GROUP 0x1c14 -#define RTL8367C_PORT7_CURRENT_GROUP_OFFSET 8 -#define RTL8367C_PORT7_CURRENT_GROUP_MASK 0xFF00 -#define RTL8367C_PORT6_CURRENT_GROUP_OFFSET 0 -#define RTL8367C_PORT6_CURRENT_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_MLD_CFG3 0x1c15 -#define RTL8367C_IGMP_MLD_IP6_BYPASS_OFFSET 5 -#define RTL8367C_IGMP_MLD_IP6_BYPASS_MASK 0x20 -#define RTL8367C_IGMP_MLD_IP4_BYPASS_239_255_255_OFFSET 4 -#define RTL8367C_IGMP_MLD_IP4_BYPASS_239_255_255_MASK 0x10 -#define RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_1_OFFSET 3 -#define RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_1_MASK 0x8 -#define RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_0_OFFSET 2 -#define RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_0_MASK 0x4 -#define RTL8367C_REPORT_LEAVE_FORWARD_OFFSET 0 -#define RTL8367C_REPORT_LEAVE_FORWARD_MASK 0x3 - -#define RTL8367C_REG_IGMP_MLD_CFG4 0x1c16 -#define RTL8367C_IGMP_MLD_CFG4_OFFSET 0 -#define RTL8367C_IGMP_MLD_CFG4_MASK 0x7FF - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST0 0x1c20 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST1 0x1c21 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST2 0x1c22 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST3 0x1c23 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST4 0x1c24 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST5 0x1c25 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST6 0x1c26 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST7 0x1c27 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST8 0x1c28 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST9 0x1c29 - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST10 0x1c2a - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST11 0x1c2b - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST12 0x1c2c - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST13 0x1c2d - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST14 0x1c2e - -#define RTL8367C_REG_IGMP_GROUP_USAGE_LIST15 0x1c2f - -#define RTL8367C_REG_EAV_CTRL0 0x1c30 -#define RTL8367C_EAV_CTRL0_OFFSET 0 -#define RTL8367C_EAV_CTRL0_MASK 0xFF - -#define RTL8367C_REG_EAV_CTRL1 0x1c31 -#define RTL8367C_REMAP_EAV_PRI3_REGEN_OFFSET 9 -#define RTL8367C_REMAP_EAV_PRI3_REGEN_MASK 0xE00 -#define RTL8367C_REMAP_EAV_PRI2_REGEN_OFFSET 6 -#define RTL8367C_REMAP_EAV_PRI2_REGEN_MASK 0x1C0 -#define RTL8367C_REMAP_EAV_PRI1_REGEN_OFFSET 3 -#define RTL8367C_REMAP_EAV_PRI1_REGEN_MASK 0x38 -#define RTL8367C_REMAP_EAV_PRI0_REGEN_OFFSET 0 -#define RTL8367C_REMAP_EAV_PRI0_REGEN_MASK 0x7 - -#define RTL8367C_REG_EAV_CTRL2 0x1c32 -#define RTL8367C_REMAP_EAV_PRI7_REGEN_OFFSET 9 -#define RTL8367C_REMAP_EAV_PRI7_REGEN_MASK 0xE00 -#define RTL8367C_REMAP_EAV_PRI6_REGEN_OFFSET 6 -#define RTL8367C_REMAP_EAV_PRI6_REGEN_MASK 0x1C0 -#define RTL8367C_REMAP_EAV_PRI5_REGEN_OFFSET 3 -#define RTL8367C_REMAP_EAV_PRI5_REGEN_MASK 0x38 -#define RTL8367C_REMAP_EAV_PRI4_REGEN_OFFSET 0 -#define RTL8367C_REMAP_EAV_PRI4_REGEN_MASK 0x7 - -#define RTL8367C_REG_SYS_TIME_FREQ 0x1c43 - -#define RTL8367C_REG_SYS_TIME_OFFSET_L 0x1c44 - -#define RTL8367C_REG_SYS_TIME_OFFSET_H 0x1c45 - -#define RTL8367C_REG_SYS_TIME_OFFSET_512NS_L 0x1c46 - -#define RTL8367C_REG_SYS_TIME_OFFSET_512NS_H 0x1c47 -#define RTL8367C_SYS_TIME_OFFSET_TUNE_OFFSET 5 -#define RTL8367C_SYS_TIME_OFFSET_TUNE_MASK 0x20 -#define RTL8367C_SYS_TIME_OFFSET_512NS_H_SYS_TIME_OFFSET_512NS_OFFSET 0 -#define RTL8367C_SYS_TIME_OFFSET_512NS_H_SYS_TIME_OFFSET_512NS_MASK 0x1F - -#define RTL8367C_REG_SYS_TIME_SEC_TRANSIT 0x1c48 -#define RTL8367C_SYS_TIME_SEC_TRANSIT_OFFSET 0 -#define RTL8367C_SYS_TIME_SEC_TRANSIT_MASK 0x1 - -#define RTL8367C_REG_SYS_TIME_SEC_HIGH_L 0x1c49 - -#define RTL8367C_REG_SYS_TIME_SEC_HIGH_H 0x1c4a - -#define RTL8367C_REG_SYS_TIME_512NS_L 0x1c4b - -#define RTL8367C_REG_SYS_TIME_512NS_H 0x1c4c -#define RTL8367C_SYS_TIME_512NS_H_OFFSET 0 -#define RTL8367C_SYS_TIME_512NS_H_MASK 0x1F - -#define RTL8367C_REG_FALLBACK_CTRL 0x1c70 -#define RTL8367C_FALLBACK_PL_DEC_EN_OFFSET 15 -#define RTL8367C_FALLBACK_PL_DEC_EN_MASK 0x8000 -#define RTL8367C_FALLBACK_MONITOR_TIMEOUT_IGNORE_OFFSET 14 -#define RTL8367C_FALLBACK_MONITOR_TIMEOUT_IGNORE_MASK 0x4000 -#define RTL8367C_FALLBACK_ERROR_RATIO_THRESHOLD_OFFSET 11 -#define RTL8367C_FALLBACK_ERROR_RATIO_THRESHOLD_MASK 0x3800 -#define RTL8367C_FALLBACK_MONITORMAX_OFFSET 8 -#define RTL8367C_FALLBACK_MONITORMAX_MASK 0x700 -#define RTL8367C_FALLBACK_MONITOR_TIMEOUT_OFFSET 0 -#define RTL8367C_FALLBACK_MONITOR_TIMEOUT_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT0_CFG0 0x1c71 -#define RTL8367C_FALLBACK_PORT0_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT0_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT0_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT0_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT0_CFG1 0x1c72 - -#define RTL8367C_REG_FALLBACK_PORT0_CFG2 0x1c73 -#define RTL8367C_FALLBACK_PORT0_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT0_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT0_CFG3 0x1c74 -#define RTL8367C_FALLBACK_PORT0_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT0_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT1_CFG0 0x1c75 -#define RTL8367C_FALLBACK_PORT1_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT1_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT1_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT1_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT1_CFG1 0x1c76 - -#define RTL8367C_REG_FALLBACK_PORT1_CFG2 0x1c77 -#define RTL8367C_FALLBACK_PORT1_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT1_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT1_CFG3 0x1c78 -#define RTL8367C_FALLBACK_PORT1_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT1_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT2_CFG0 0x1c79 -#define RTL8367C_FALLBACK_PORT2_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT2_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT2_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT2_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT2_CFG1 0x1c7a - -#define RTL8367C_REG_FALLBACK_PORT2_CFG2 0x1c7b -#define RTL8367C_FALLBACK_PORT2_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT2_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT2_CFG3 0x1c7c -#define RTL8367C_FALLBACK_PORT2_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT2_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT3_CFG0 0x1c7d -#define RTL8367C_FALLBACK_PORT3_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT3_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT3_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT3_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT3_CFG1 0x1c7e - -#define RTL8367C_REG_FALLBACK_PORT3_CFG2 0x1c7f -#define RTL8367C_FALLBACK_PORT3_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT3_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT3_CFG3 0x1c80 -#define RTL8367C_FALLBACK_PORT3_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT3_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT4_CFG0 0x1c81 -#define RTL8367C_FALLBACK_PORT4_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT4_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT4_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT4_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT4_CFG1 0x1c82 - -#define RTL8367C_REG_FALLBACK_PORT4_CFG2 0x1c83 -#define RTL8367C_FALLBACK_PORT4_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT4_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT4_CFG3 0x1c84 -#define RTL8367C_FALLBACK_PORT4_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT4_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_CTRL1 0x1c85 -#define RTL8367C_FALLBACK_VALIDFLOW_OFFSET 8 -#define RTL8367C_FALLBACK_VALIDFLOW_MASK 0xFF00 -#define RTL8367C_FALLBACK_STOP_TMR_OFFSET 0 -#define RTL8367C_FALLBACK_STOP_TMR_MASK 0x1 - -#define RTL8367C_REG_FALLBACK_CPL 0x1c86 -#define RTL8367C_PORT4_CPL_OFFSET 4 -#define RTL8367C_PORT4_CPL_MASK 0x10 -#define RTL8367C_PORT3_CPL_OFFSET 3 -#define RTL8367C_PORT3_CPL_MASK 0x8 -#define RTL8367C_PORT2_CPL_OFFSET 2 -#define RTL8367C_PORT2_CPL_MASK 0x4 -#define RTL8367C_PORT1_CPL_OFFSET 1 -#define RTL8367C_PORT1_CPL_MASK 0x2 -#define RTL8367C_PORT0_CPL_OFFSET 0 -#define RTL8367C_PORT0_CPL_MASK 0x1 - -#define RTL8367C_REG_FALLBACK_PHY_PAGE 0x1c87 -#define RTL8367C_FALLBACK_PHY_PAGE_OFFSET 0 -#define RTL8367C_FALLBACK_PHY_PAGE_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PHY_REG 0x1c88 -#define RTL8367C_FALLBACK_PHY_REG_OFFSET 0 -#define RTL8367C_FALLBACK_PHY_REG_MASK 0x1F - -#define RTL8367C_REG_AFBK_INFO_X0 0x1c89 - -#define RTL8367C_REG_AFBK_INFO_X1 0x1c8a - -#define RTL8367C_REG_AFBK_INFO_X2 0x1c8b - -#define RTL8367C_REG_AFBK_INFO_X3 0x1c8c - -#define RTL8367C_REG_AFBK_INFO_X4 0x1c8d - -#define RTL8367C_REG_AFBK_INFO_X5 0x1c8e - -#define RTL8367C_REG_AFBK_INFO_X6 0x1c8f - -#define RTL8367C_REG_AFBK_INFO_X7 0x1c90 - -#define RTL8367C_REG_AFBK_INFO_X8 0x1c91 - -#define RTL8367C_REG_AFBK_INFO_X9 0x1c92 - -#define RTL8367C_REG_AFBK_INFO_X10 0x1c93 - -#define RTL8367C_REG_AFBK_INFO_X11 0x1c94 - -#define RTL8367C_REG_FALLBACK_PORT5_CFG0 0x1ca0 -#define RTL8367C_FALLBACK_PORT5_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT5_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT5_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT5_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT5_CFG1 0x1ca1 - -#define RTL8367C_REG_FALLBACK_PORT5_CFG2 0x1ca2 -#define RTL8367C_FALLBACK_PORT5_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT5_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT5_CFG3 0x1ca3 -#define RTL8367C_FALLBACK_PORT5_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT5_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT6_CFG0 0x1ca4 -#define RTL8367C_FALLBACK_PORT6_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT6_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT6_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT6_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT6_CFG1 0x1ca5 - -#define RTL8367C_REG_FALLBACK_PORT6_CFG2 0x1ca6 -#define RTL8367C_FALLBACK_PORT6_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT6_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT6_CFG3 0x1ca7 -#define RTL8367C_FALLBACK_PORT6_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT6_CFG3_MASK 0xFF - -#define RTL8367C_REG_FALLBACK_PORT7_CFG0 0x1ca8 -#define RTL8367C_FALLBACK_PORT7_CFG0_RESET_POWER_LEVEL_OFFSET 15 -#define RTL8367C_FALLBACK_PORT7_CFG0_RESET_POWER_LEVEL_MASK 0x8000 -#define RTL8367C_FALLBACK_PORT7_CFG0_ENABLE_OFFSET 14 -#define RTL8367C_FALLBACK_PORT7_CFG0_ENABLE_MASK 0x4000 - -#define RTL8367C_REG_FALLBACK_PORT7_CFG1 0x1ca9 - -#define RTL8367C_REG_FALLBACK_PORT7_CFG2 0x1caa -#define RTL8367C_FALLBACK_PORT7_CFG2_OFFSET 0 -#define RTL8367C_FALLBACK_PORT7_CFG2_MASK 0xFFF - -#define RTL8367C_REG_FALLBACK_PORT7_CFG3 0x1cab -#define RTL8367C_FALLBACK_PORT7_CFG3_OFFSET 0 -#define RTL8367C_FALLBACK_PORT7_CFG3_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT8_CONTROL 0x1cb0 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT8_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT8_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT8_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT8_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT8_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT8_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT8_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT8_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT8_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT8_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT8_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT9_CONTROL 0x1cb1 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT9_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT9_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT9_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT9_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT9_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT9_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT9_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT9_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT9_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT9_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT9_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT10_CONTROL 0x1cb2 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_QUERY_OFFSET 14 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_QUERY_MASK 0x4000 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_REPORT_OFFSET 13 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_REPORT_MASK 0x2000 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_LEAVE_OFFSET 12 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_LEAVE_MASK 0x1000 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_MRP_OFFSET 11 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_MRP_MASK 0x800 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_MC_DATA_OFFSET 10 -#define RTL8367C_IGMP_PORT10_CONTROL_ALLOW_MC_DATA_MASK 0x400 -#define RTL8367C_IGMP_PORT10_CONTROL_MLDv2_OP_OFFSET 8 -#define RTL8367C_IGMP_PORT10_CONTROL_MLDv2_OP_MASK 0x300 -#define RTL8367C_IGMP_PORT10_CONTROL_MLDv1_OP_OFFSET 6 -#define RTL8367C_IGMP_PORT10_CONTROL_MLDv1_OP_MASK 0xC0 -#define RTL8367C_IGMP_PORT10_CONTROL_IGMPV3_OP_OFFSET 4 -#define RTL8367C_IGMP_PORT10_CONTROL_IGMPV3_OP_MASK 0x30 -#define RTL8367C_IGMP_PORT10_CONTROL_IGMPV2_OP_OFFSET 2 -#define RTL8367C_IGMP_PORT10_CONTROL_IGMPV2_OP_MASK 0xC -#define RTL8367C_IGMP_PORT10_CONTROL_IGMPV1_OP_OFFSET 0 -#define RTL8367C_IGMP_PORT10_CONTROL_IGMPV1_OP_MASK 0x3 - -#define RTL8367C_REG_IGMP_PORT89_MAX_GROUP 0x1cb3 -#define RTL8367C_PORT9_MAX_GROUP_OFFSET 8 -#define RTL8367C_PORT9_MAX_GROUP_MASK 0xFF00 -#define RTL8367C_PORT8_MAX_GROUP_OFFSET 0 -#define RTL8367C_PORT8_MAX_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT10_MAX_GROUP 0x1cb4 -#define RTL8367C_IGMP_PORT10_MAX_GROUP_OFFSET 0 -#define RTL8367C_IGMP_PORT10_MAX_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT89_CURRENT_GROUP 0x1cb5 -#define RTL8367C_PORT9_CURRENT_GROUP_OFFSET 8 -#define RTL8367C_PORT9_CURRENT_GROUP_MASK 0xFF00 -#define RTL8367C_PORT8_CURRENT_GROUP_OFFSET 0 -#define RTL8367C_PORT8_CURRENT_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_PORT10_CURRENT_GROUP 0x1cb6 -#define RTL8367C_IGMP_PORT10_CURRENT_GROUP_OFFSET 0 -#define RTL8367C_IGMP_PORT10_CURRENT_GROUP_MASK 0xFF - -#define RTL8367C_REG_IGMP_L3_CHECKSUM_CHECK 0x1cb7 -#define RTL8367C_IGMP_L3_CHECKSUM_CHECK_OFFSET 0 -#define RTL8367C_IGMP_L3_CHECKSUM_CHECK_MASK 0x1 - -/* (16'h1d00)chip_70b_reg */ - -#define RTL8367C_REG_PCSXF_CFG 0x1d00 -#define RTL8367C_PCSXF_CFG_Reserved_OFFSET 15 -#define RTL8367C_PCSXF_CFG_Reserved_MASK 0x8000 -#define RTL8367C_CFG_RST_RXFIFO_P7_5_OFFSET 12 -#define RTL8367C_CFG_RST_RXFIFO_P7_5_MASK 0x7000 -#define RTL8367C_CFG_PCSXF_OFFSET 8 -#define RTL8367C_CFG_PCSXF_MASK 0xF00 -#define RTL8367C_CFG_RST_RXFIFO_OFFSET 3 -#define RTL8367C_CFG_RST_RXFIFO_MASK 0xF8 -#define RTL8367C_CFG_COL2RXDV_OFFSET 2 -#define RTL8367C_CFG_COL2RXDV_MASK 0x4 -#define RTL8367C_CFG_PHY_SDET_OFFSET 0 -#define RTL8367C_CFG_PHY_SDET_MASK 0x3 - -#define RTL8367C_REG_PHYID_CFG0 0x1d01 -#define RTL8367C_CFG_PHY_BRD_MODE_P7_5_OFFSET 11 -#define RTL8367C_CFG_PHY_BRD_MODE_P7_5_MASK 0x3800 -#define RTL8367C_CFG_PHYAD_14C_OFFSET 10 -#define RTL8367C_CFG_PHYAD_14C_MASK 0x400 -#define RTL8367C_CFG_PHY_BRD_MODE_OFFSET 5 -#define RTL8367C_CFG_PHY_BRD_MODE_MASK 0x3E0 -#define RTL8367C_CFG_BRD_PHYAD_OFFSET 0 -#define RTL8367C_CFG_BRD_PHYAD_MASK 0x1F - -#define RTL8367C_REG_PHYID_CFG1 0x1d02 -#define RTL8367C_CFG_MSK_MDI_OFFSET 5 -#define RTL8367C_CFG_MSK_MDI_MASK 0x1FE0 -#define RTL8367C_CFG_BASE_PHYAD_OFFSET 0 -#define RTL8367C_CFG_BASE_PHYAD_MASK 0x1F - -#define RTL8367C_REG_PHY_POLL_CFG0 0x1d03 -#define RTL8367C_CFG_HOTCMD_PRD_EN_OFFSET 15 -#define RTL8367C_CFG_HOTCMD_PRD_EN_MASK 0x8000 -#define RTL8367C_CFG_HOTCMD_EN_OFFSET 12 -#define RTL8367C_CFG_HOTCMD_EN_MASK 0x7000 -#define RTL8367C_CFG_POLL_PERIOD_OFFSET 8 -#define RTL8367C_CFG_POLL_PERIOD_MASK 0xF00 -#define RTL8367C_CFG_PERI_CMDS_RD_OFFSET 4 -#define RTL8367C_CFG_PERI_CMDS_RD_MASK 0xF0 -#define RTL8367C_CFG_PERI_CMDS_WR_OFFSET 0 -#define RTL8367C_CFG_PERI_CMDS_WR_MASK 0xF - -#define RTL8367C_REG_PHY_POLL_CFG1 0x1d04 - -#define RTL8367C_REG_PHY_POLL_CFG2 0x1d05 - -#define RTL8367C_REG_PHY_POLL_CFG3 0x1d06 - -#define RTL8367C_REG_PHY_POLL_CFG4 0x1d07 - -#define RTL8367C_REG_PHY_POLL_CFG5 0x1d08 - -#define RTL8367C_REG_PHY_POLL_CFG6 0x1d09 - -#define RTL8367C_REG_PHY_POLL_CFG7 0x1d0a - -#define RTL8367C_REG_PHY_POLL_CFG8 0x1d0b - -#define RTL8367C_REG_PHY_POLL_CFG9 0x1d0c - -#define RTL8367C_REG_PHY_POLL_CFG10 0x1d0d - -#define RTL8367C_REG_PHY_POLL_CFG11 0x1d0e - -#define RTL8367C_REG_PHY_POLL_CFG12 0x1d0f - -#define RTL8367C_REG_EFUSE_MISC 0x1d10 -#define RTL8367C_CFG_SA_SEL_OFFSET 5 -#define RTL8367C_CFG_SA_SEL_MASK 0x20 -#define RTL8367C_CFG_PHYAD00_OFFSET 0 -#define RTL8367C_CFG_PHYAD00_MASK 0x1F - -#define RTL8367C_REG_SDS_MISC 0x1d11 -#define RTL8367C_CFG_SGMII_RXFC_OFFSET 14 -#define RTL8367C_CFG_SGMII_RXFC_MASK 0x4000 -#define RTL8367C_CFG_SGMII_TXFC_OFFSET 13 -#define RTL8367C_CFG_SGMII_TXFC_MASK 0x2000 -#define RTL8367C_INB_ARB_OFFSET 12 -#define RTL8367C_INB_ARB_MASK 0x1000 -#define RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET 11 -#define RTL8367C_CFG_MAC8_SEL_HSGMII_MASK 0x800 -#define RTL8367C_CFG_SGMII_FDUP_OFFSET 10 -#define RTL8367C_CFG_SGMII_FDUP_MASK 0x400 -#define RTL8367C_CFG_SGMII_LINK_OFFSET 9 -#define RTL8367C_CFG_SGMII_LINK_MASK 0x200 -#define RTL8367C_CFG_SGMII_SPD_OFFSET 7 -#define RTL8367C_CFG_SGMII_SPD_MASK 0x180 -#define RTL8367C_CFG_MAC8_SEL_SGMII_OFFSET 6 -#define RTL8367C_CFG_MAC8_SEL_SGMII_MASK 0x40 -#define RTL8367C_CFG_INB_SEL_OFFSET 3 -#define RTL8367C_CFG_INB_SEL_MASK 0x38 -#define RTL8367C_CFG_SDS_MODE_18C_OFFSET 0 -#define RTL8367C_CFG_SDS_MODE_18C_MASK 0x7 - -#define RTL8367C_REG_FIFO_CTRL 0x1d12 -#define RTL8367C_CFG_LINK_DOWN_CLR_FIFO_OFFSET 11 -#define RTL8367C_CFG_LINK_DOWN_CLR_FIFO_MASK 0x800 -#define RTL8367C_CFG_LPBK_OFFSET 10 -#define RTL8367C_CFG_LPBK_MASK 0x400 -#define RTL8367C_CFG_NOT_FF_OUT_OFFSET 9 -#define RTL8367C_CFG_NOT_FF_OUT_MASK 0x200 -#define RTL8367C_CFG_WATER_LEVEL_FD_OFFSET 6 -#define RTL8367C_CFG_WATER_LEVEL_FD_MASK 0x1C0 -#define RTL8367C_CFG_WATER_LEVEL_Y2X_OFFSET 3 -#define RTL8367C_CFG_WATER_LEVEL_Y2X_MASK 0x38 -#define RTL8367C_CFG_WATER_LEVEL_X2Y_OFFSET 0 -#define RTL8367C_CFG_WATER_LEVEL_X2Y_MASK 0x7 - -#define RTL8367C_REG_BCAM_SETTING 0x1d13 -#define RTL8367C_CFG_BCAM_MDS_OFFSET 3 -#define RTL8367C_CFG_BCAM_MDS_MASK 0x18 -#define RTL8367C_CFG_BCAM_RDS_OFFSET 0 -#define RTL8367C_CFG_BCAM_RDS_MASK 0x7 - -#define RTL8367C_REG_GPHY_ACS_MISC 0x1d14 -#define RTL8367C_CFG_SEL_GPHY_SMI_OFFSET 3 -#define RTL8367C_CFG_SEL_GPHY_SMI_MASK 0x8 -#define RTL8367C_CFG_BRD_PHYIDX_OFFSET 0 -#define RTL8367C_CFG_BRD_PHYIDX_MASK 0x7 - -#define RTL8367C_REG_GPHY_OCP_MSB_0 0x1d15 -#define RTL8367C_CFG_CPU_OCPADR_MSB_OFFSET 6 -#define RTL8367C_CFG_CPU_OCPADR_MSB_MASK 0xFC0 -#define RTL8367C_CFG_DW8051_OCPADR_MSB_OFFSET 0 -#define RTL8367C_CFG_DW8051_OCPADR_MSB_MASK 0x3F - -#define RTL8367C_REG_GPHY_OCP_MSB_1 0x1d16 -#define RTL8367C_CFG_PATCH_OCPADR_MSB_OFFSET 6 -#define RTL8367C_CFG_PATCH_OCPADR_MSB_MASK 0xFC0 -#define RTL8367C_CFG_PHYSTS_OCPADR_MSB_OFFSET 0 -#define RTL8367C_CFG_PHYSTS_OCPADR_MSB_MASK 0x3F - -#define RTL8367C_REG_GPHY_OCP_MSB_2 0x1d17 -#define RTL8367C_CFG_RRCP_OCPADR_MSB_OFFSET 6 -#define RTL8367C_CFG_RRCP_OCPADR_MSB_MASK 0xFC0 -#define RTL8367C_CFG_RTCT_OCPADR_MSB_OFFSET 0 -#define RTL8367C_CFG_RTCT_OCPADR_MSB_MASK 0x3F - -#define RTL8367C_REG_GPHY_OCP_MSB_3 0x1d18 -#define RTL8367C_GPHY_OCP_MSB_3_OFFSET 0 -#define RTL8367C_GPHY_OCP_MSB_3_MASK 0x3F - -#define RTL8367C_REG_GPIO_67C_I_X0 0x1d19 - -#define RTL8367C_REG_GPIO_67C_I_X1 0x1d1a - -#define RTL8367C_REG_GPIO_67C_I_X2 0x1d1b - -#define RTL8367C_REG_GPIO_67C_I_X3 0x1d1c -#define RTL8367C_GPIO_67C_I_X3_OFFSET 0 -#define RTL8367C_GPIO_67C_I_X3_MASK 0x3FFF - -#define RTL8367C_REG_GPIO_67C_O_X0 0x1d1d - -#define RTL8367C_REG_GPIO_67C_O_X1 0x1d1e - -#define RTL8367C_REG_GPIO_67C_O_X2 0x1d1f - -#define RTL8367C_REG_GPIO_67C_O_X3 0x1d20 -#define RTL8367C_GPIO_67C_O_X3_OFFSET 0 -#define RTL8367C_GPIO_67C_O_X3_MASK 0x3FFF - -#define RTL8367C_REG_GPIO_67C_OE_X0 0x1d21 - -#define RTL8367C_REG_GPIO_67C_OE_X1 0x1d22 - -#define RTL8367C_REG_GPIO_67C_OE_X2 0x1d23 - -#define RTL8367C_REG_GPIO_67C_OE_X3 0x1d24 -#define RTL8367C_GPIO_67C_OE_X3_OFFSET 0 -#define RTL8367C_GPIO_67C_OE_X3_MASK 0x3FFF - -#define RTL8367C_REG_GPIO_MODE_67C_X0 0x1d25 - -#define RTL8367C_REG_GPIO_MODE_67C_X1 0x1d26 - -#define RTL8367C_REG_GPIO_MODE_67C_X2 0x1d27 - -#define RTL8367C_REG_GPIO_MODE_67C_X3 0x1d28 -#define RTL8367C_GPIO_MODE_67C_X3_OFFSET 0 -#define RTL8367C_GPIO_MODE_67C_X3_MASK 0x3FFF - -#define RTL8367C_REG_WGPHY_MISC_0 0x1d29 -#define RTL8367C_CFG_INIPHY_DISGIGA_P7_5_OFFSET 13 -#define RTL8367C_CFG_INIPHY_DISGIGA_P7_5_MASK 0xE000 -#define RTL8367C_CFG_INIPHY_PWRUP_OFFSET 5 -#define RTL8367C_CFG_INIPHY_PWRUP_MASK 0x1FE0 -#define RTL8367C_CFG_INIPHY_DISGIGA_OFFSET 0 -#define RTL8367C_CFG_INIPHY_DISGIGA_MASK 0x1F - -#define RTL8367C_REG_WGPHY_MISC_1 0x1d2a -#define RTL8367C_WGPHY_MISC_1_OFFSET 0 -#define RTL8367C_WGPHY_MISC_1_MASK 0xFF - -#define RTL8367C_REG_WGPHY_MISC_2 0x1d2b -#define RTL8367C_WGPHY_MISC_2_OFFSET 0 -#define RTL8367C_WGPHY_MISC_2_MASK 0x3FF - -#define RTL8367C_REG_CFG_AFBK_GPHY_0 0x1d2c -#define RTL8367C_CFG_AFBK_GPHY_0_OFFSET 0 -#define RTL8367C_CFG_AFBK_GPHY_0_MASK 0x1F - -#define RTL8367C_REG_CFG_AFBK_GPHY_1 0x1d2d -#define RTL8367C_CFG_AFBK_GPHY_1_OFFSET 0 -#define RTL8367C_CFG_AFBK_GPHY_1_MASK 0xFFF - -#define RTL8367C_REG_EF_SLV_CTRL_0 0x1d2e -#define RTL8367C_EF_SLV_BUSY_OFFSET 11 -#define RTL8367C_EF_SLV_BUSY_MASK 0x800 -#define RTL8367C_EF_SLV_ACK_OFFSET 10 -#define RTL8367C_EF_SLV_ACK_MASK 0x400 -#define RTL8367C_EF_SLV_A_OFFSET 2 -#define RTL8367C_EF_SLV_A_MASK 0x3FC -#define RTL8367C_EF_SLV_WE_OFFSET 1 -#define RTL8367C_EF_SLV_WE_MASK 0x2 -#define RTL8367C_EF_SLV_CE_OFFSET 0 -#define RTL8367C_EF_SLV_CE_MASK 0x1 - -#define RTL8367C_REG_EF_SLV_CTRL_1 0x1d2f - -#define RTL8367C_REG_EF_SLV_CTRL_2 0x1d30 - -#define RTL8367C_REG_EFUSE_MISC_1 0x1d31 -#define RTL8367C_EF_EN_EFUSE_OFFSET 10 -#define RTL8367C_EF_EN_EFUSE_MASK 0x400 -#define RTL8367C_EF_MODEL_ID_OFFSET 6 -#define RTL8367C_EF_MODEL_ID_MASK 0x3C0 -#define RTL8367C_EF_RSVD_OFFSET 2 -#define RTL8367C_EF_RSVD_MASK 0x3C -#define RTL8367C_EF_SYS_CLK_OFFSET 0 -#define RTL8367C_EF_SYS_CLK_MASK 0x3 - -#define RTL8367C_REG_IO_MISC_FUNC 0x1d32 -#define RTL8367C_TST_MODE_OFFSET 3 -#define RTL8367C_TST_MODE_MASK 0x8 -#define RTL8367C_UART_EN_OFFSET 2 -#define RTL8367C_UART_EN_MASK 0x4 -#define RTL8367C_INT_EN_OFFSET 1 -#define RTL8367C_INT_EN_MASK 0x2 -#define RTL8367C_BUZ_EN_OFFSET 0 -#define RTL8367C_BUZ_EN_MASK 0x1 - -#define RTL8367C_REG_HTRAM_DVS 0x1d33 -#define RTL8367C_HTRAM_DVS_OFFSET 0 -#define RTL8367C_HTRAM_DVS_MASK 0x1 - -#define RTL8367C_REG_EF_SLV_CTRL_3 0x1d34 -#define RTL8367C_EF_SLV_CTRL_3_OFFSET 0 -#define RTL8367C_EF_SLV_CTRL_3_MASK 0x1 - -#define RTL8367C_REG_INBAND_EN14C 0x1d35 -#define RTL8367C_INBAND_EN14C_OFFSET 0 -#define RTL8367C_INBAND_EN14C_MASK 0x1 - -#define RTL8367C_REG_CFG_SWR_L 0x1d36 -#define RTL8367C_ANARG_RDY_SWR_L_OFFSET 14 -#define RTL8367C_ANARG_RDY_SWR_L_MASK 0x4000 -#define RTL8367C_ANARG_VALID_SWR_L_OFFSET 13 -#define RTL8367C_ANARG_VALID_SWR_L_MASK 0x2000 -#define RTL8367C_SAW_SWR_L_OFFSET 9 -#define RTL8367C_SAW_SWR_L_MASK 0x1E00 -#define RTL8367C_SAW_VALID_SWR_L_OFFSET 8 -#define RTL8367C_SAW_VALID_SWR_L_MASK 0x100 -#define RTL8367C_UPS_DBGO_L_OFFSET 0 -#define RTL8367C_UPS_DBGO_L_MASK 0xFF - -#define RTL8367C_REG_BTCAM_CTRL 0x1d37 -#define RTL8367C_TCAM_RDS_OFFSET 2 -#define RTL8367C_TCAM_RDS_MASK 0x1C -#define RTL8367C_TCAM_MDS_OFFSET 0 -#define RTL8367C_TCAM_MDS_MASK 0x3 - -#define RTL8367C_REG_PBRAM_BISR_CTRL 0x1d38 -#define RTL8367C_HAS_HLDRMP_MD_OFFSET 9 -#define RTL8367C_HAS_HLDRMP_MD_MASK 0x200 -#define RTL8367C_PB_HLDRMP_MD_OFFSET 8 -#define RTL8367C_PB_HLDRMP_MD_MASK 0x100 -#define RTL8367C_HAS_BISR_BIRSTN_OFFSET 7 -#define RTL8367C_HAS_BISR_BIRSTN_MASK 0x80 -#define RTL8367C_SEC_RUN_HSA_OFFSET 6 -#define RTL8367C_SEC_RUN_HSA_MASK 0x40 -#define RTL8367C_HAS_HLDRMP_VAL_OFFSET 5 -#define RTL8367C_HAS_HLDRMP_VAL_MASK 0x20 -#define RTL8367C_HAS_BISR_PWRSTN_OFFSET 4 -#define RTL8367C_HAS_BISR_PWRSTN_MASK 0x10 -#define RTL8367C_SEC_RUN_PB_OFFSET 3 -#define RTL8367C_SEC_RUN_PB_MASK 0x8 -#define RTL8367C_PB_HLDRMP_VAL_OFFSET 2 -#define RTL8367C_PB_HLDRMP_VAL_MASK 0x4 -#define RTL8367C_PB_BISR_BIRSTN_OFFSET 1 -#define RTL8367C_PB_BISR_BIRSTN_MASK 0x2 -#define RTL8367C_PB_BISR_PWRSTN_OFFSET 0 -#define RTL8367C_PB_BISR_PWRSTN_MASK 0x1 - -#define RTL8367C_REG_CVLANRAM_BISR_CTRL 0x1d39 -#define RTL8367C_SEC_RUN_CVLAN_OFFSET 4 -#define RTL8367C_SEC_RUN_CVLAN_MASK 0x10 -#define RTL8367C_CVALN_HLDRMP_MD_OFFSET 3 -#define RTL8367C_CVALN_HLDRMP_MD_MASK 0x8 -#define RTL8367C_CVALN_HLDRMP_VAL_OFFSET 2 -#define RTL8367C_CVALN_HLDRMP_VAL_MASK 0x4 -#define RTL8367C_CVLAN_BISR_BIRSTN_OFFSET 1 -#define RTL8367C_CVLAN_BISR_BIRSTN_MASK 0x2 -#define RTL8367C_CVLAN_BISR_PWRSTN_OFFSET 0 -#define RTL8367C_CVLAN_BISR_PWRSTN_MASK 0x1 - -#define RTL8367C_REG_CFG_1588_TIMER_EN_GPI 0x1d3a -#define RTL8367C_CFG_1588_TIMER_EN_GPI_OFFSET 0 -#define RTL8367C_CFG_1588_TIMER_EN_GPI_MASK 0x1 - -#define RTL8367C_REG_MDIO_PRMB_SUPP 0x1d3b -#define RTL8367C_FIB_HIPRI_OFFSET 14 -#define RTL8367C_FIB_HIPRI_MASK 0x4000 -#define RTL8367C_SMT_EN_OFFSET 13 -#define RTL8367C_SMT_EN_MASK 0x2000 -#define RTL8367C_P4_FB_CPL_OFFSET 12 -#define RTL8367C_P4_FB_CPL_MASK 0x1000 -#define RTL8367C_P3_FB_CPL_OFFSET 11 -#define RTL8367C_P3_FB_CPL_MASK 0x800 -#define RTL8367C_P2_FB_CPL_OFFSET 10 -#define RTL8367C_P2_FB_CPL_MASK 0x400 -#define RTL8367C_P1_FB_CPL_OFFSET 9 -#define RTL8367C_P1_FB_CPL_MASK 0x200 -#define RTL8367C_P0_FB_CPL_OFFSET 8 -#define RTL8367C_P0_FB_CPL_MASK 0x100 -#define RTL8367C_DBG_PKG_8367N_OFFSET 7 -#define RTL8367C_DBG_PKG_8367N_MASK 0x80 -#define RTL8367C_DBG_PKG_8367VB_OFFSET 6 -#define RTL8367C_DBG_PKG_8367VB_MASK 0x40 -#define RTL8367C_CFG_DEBUG_EN_OFFSET 5 -#define RTL8367C_CFG_DEBUG_EN_MASK 0x20 -#define RTL8367C_CFG_TMR_ACK_OFFSET 1 -#define RTL8367C_CFG_TMR_ACK_MASK 0x1E -#define RTL8367C_CFG_PRMB_SUPP_OFFSET 0 -#define RTL8367C_CFG_PRMB_SUPP_MASK 0x1 - -#define RTL8367C_REG_BOND4READ 0x1d3c -#define RTL8367C_BOND_BOID0_OFFSET 8 -#define RTL8367C_BOND_BOID0_MASK 0x100 -#define RTL8367C_BOND_SYSCLK_OFFSET 7 -#define RTL8367C_BOND_SYSCLK_MASK 0x80 -#define RTL8367C_BOND_PHYMODE_OFFSET 6 -#define RTL8367C_BOND_PHYMODE_MASK 0x40 -#define RTL8367C_BOND_DIS_PON_BIST_OFFSET 5 -#define RTL8367C_BOND_DIS_PON_BIST_MASK 0x20 -#define RTL8367C_BOND_DIS_TABLE_INIT_OFFSET 4 -#define RTL8367C_BOND_DIS_TABLE_INIT_MASK 0x10 -#define RTL8367C_BOND_BYP_AFE_PLL_OFFSET 3 -#define RTL8367C_BOND_BYP_AFE_PLL_MASK 0x8 -#define RTL8367C_BOND_BYP_AFE_POR_OFFSET 2 -#define RTL8367C_BOND_BYP_AFE_POR_MASK 0x4 -#define RTL8367C_BOND_BISR_COND_OFFSET 1 -#define RTL8367C_BOND_BISR_COND_MASK 0x2 -#define RTL8367C_BOND_EF_EN_OFFSET 0 -#define RTL8367C_BOND_EF_EN_MASK 0x1 - -#define RTL8367C_REG_REG_TO_ECO0 0x1d3d - -#define RTL8367C_REG_REG_TO_ECO1 0x1d3e - -#define RTL8367C_REG_REG_TO_ECO2 0x1d3f - -#define RTL8367C_REG_REG_TO_ECO3 0x1d40 - -#define RTL8367C_REG_REG_TO_ECO4 0x1d41 - -#define RTL8367C_REG_PHYSTS_CTRL0 0x1d42 -#define RTL8367C_MACRX_DUPDET_EN_OFFSET 5 -#define RTL8367C_MACRX_DUPDET_EN_MASK 0x20 -#define RTL8367C_LNKUP_DLY_EN_OFFSET 4 -#define RTL8367C_LNKUP_DLY_EN_MASK 0x10 -#define RTL8367C_GE_100M_LNKUP_DLY_OFFSET 2 -#define RTL8367C_GE_100M_LNKUP_DLY_MASK 0xC -#define RTL8367C_PHYSTS_10M_LNKUP_DLY_OFFSET 0 -#define RTL8367C_PHYSTS_10M_LNKUP_DLY_MASK 0x3 - -#define RTL8367C_REG_SSC_CTRL0_0 0x1d44 -#define RTL8367C_SSC_CTRL0_0_SSC_TYPE_OFFSET 13 -#define RTL8367C_SSC_CTRL0_0_SSC_TYPE_MASK 0x2000 -#define RTL8367C_SSC_CTRL0_0_PHASE_LIM_SEL_OFFSET 5 -#define RTL8367C_SSC_CTRL0_0_PHASE_LIM_SEL_MASK 0x1FE0 -#define RTL8367C_SSC_CTRL0_0_PHASE_LIM_EN_OFFSET 4 -#define RTL8367C_SSC_CTRL0_0_PHASE_LIM_EN_MASK 0x10 -#define RTL8367C_SSC_CTRL0_0_DLL_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL0_0_DLL_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL0_0_SSC_EN_OFFSET 1 -#define RTL8367C_SSC_CTRL0_0_SSC_EN_MASK 0x2 -#define RTL8367C_SSC_CTRL0_0_SSC_MODE_OFFSET 0 -#define RTL8367C_SSC_CTRL0_0_SSC_MODE_MASK 0x1 - -#define RTL8367C_REG_SSC_RDM_SEED 0x1d45 - -#define RTL8367C_REG_SSC_PN_POLY_SEL 0x1d46 - -#define RTL8367C_REG_SSC_CTRL0_3 0x1d47 -#define RTL8367C_SSC_CTRL0_3_PHSFT_CNT_OFFSET 8 -#define RTL8367C_SSC_CTRL0_3_PHSFT_CNT_MASK 0x7F00 -#define RTL8367C_SSC_CTRL0_3_PHSFT_A_OFFSET 7 -#define RTL8367C_SSC_CTRL0_3_PHSFT_A_MASK 0x80 -#define RTL8367C_SSC_CTRL0_3_PHSFT_B_OFFSET 6 -#define RTL8367C_SSC_CTRL0_3_PHSFT_B_MASK 0x40 -#define RTL8367C_SSC_CTRL0_3_PHSFT_UPDN_OFFSET 5 -#define RTL8367C_SSC_CTRL0_3_PHSFT_UPDN_MASK 0x20 -#define RTL8367C_SSC_CTRL0_3_PHSFT_PRD_OFFSET 4 -#define RTL8367C_SSC_CTRL0_3_PHSFT_PRD_MASK 0x10 -#define RTL8367C_SSC_CTRL0_3_PN_POLY_DEG_OFFSET 0 -#define RTL8367C_SSC_CTRL0_3_PN_POLY_DEG_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL0_4 0x1d48 -#define RTL8367C_SSC_CTRL0_4_SSC_UP1DN0_OFFSET 15 -#define RTL8367C_SSC_CTRL0_4_SSC_UP1DN0_MASK 0x8000 -#define RTL8367C_SSC_CTRL0_4_SSC_PERIOD_OFFSET 8 -#define RTL8367C_SSC_CTRL0_4_SSC_PERIOD_MASK 0x7F00 -#define RTL8367C_SSC_CTRL0_4_SSC_OFFSET_OFFSET 0 -#define RTL8367C_SSC_CTRL0_4_SSC_OFFSET_MASK 0xFF - -#define RTL8367C_REG_SSC_CTRL0_5 0x1d49 -#define RTL8367C_SSC_CTRL0_5_PH_OFS_TOG_OFFSET 15 -#define RTL8367C_SSC_CTRL0_5_PH_OFS_TOG_MASK 0x8000 -#define RTL8367C_SSC_CTRL0_5_PH_OFS_OFFSET 10 -#define RTL8367C_SSC_CTRL0_5_PH_OFS_MASK 0x7C00 -#define RTL8367C_SSC_CTRL0_5_SSC_STEP_OFFSET 4 -#define RTL8367C_SSC_CTRL0_5_SSC_STEP_MASK 0x3F0 -#define RTL8367C_SSC_CTRL0_5_SSC_TEST_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL0_5_SSC_TEST_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL0_5_SSC_PH_CFG_OFFSET 0 -#define RTL8367C_SSC_CTRL0_5_SSC_PH_CFG_MASK 0x3 - -#define RTL8367C_REG_SSC_STS0 0x1d4a -#define RTL8367C_SSC_STS0_OFS_BUSY_OFFSET 13 -#define RTL8367C_SSC_STS0_OFS_BUSY_MASK 0x2000 -#define RTL8367C_SSC_STS0_OFS_TOTAL_R_OFFSET 8 -#define RTL8367C_SSC_STS0_OFS_TOTAL_R_MASK 0x1F00 -#define RTL8367C_SSC_STS0_CNT_GRY0_OFFSET 4 -#define RTL8367C_SSC_STS0_CNT_GRY0_MASK 0xF0 -#define RTL8367C_SSC_STS0_OFS_GRY0_OFFSET 0 -#define RTL8367C_SSC_STS0_OFS_GRY0_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL1_0 0x1d4b -#define RTL8367C_SSC_CTRL1_0_SSC_TYPE_OFFSET 13 -#define RTL8367C_SSC_CTRL1_0_SSC_TYPE_MASK 0x2000 -#define RTL8367C_SSC_CTRL1_0_PHASE_LIM_SEL_OFFSET 5 -#define RTL8367C_SSC_CTRL1_0_PHASE_LIM_SEL_MASK 0x1FE0 -#define RTL8367C_SSC_CTRL1_0_PHASE_LIM_EN_OFFSET 4 -#define RTL8367C_SSC_CTRL1_0_PHASE_LIM_EN_MASK 0x10 -#define RTL8367C_SSC_CTRL1_0_DLL_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL1_0_DLL_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL1_0_SSC_EN_OFFSET 1 -#define RTL8367C_SSC_CTRL1_0_SSC_EN_MASK 0x2 -#define RTL8367C_SSC_CTRL1_0_SSC_MODE_OFFSET 0 -#define RTL8367C_SSC_CTRL1_0_SSC_MODE_MASK 0x1 - -#define RTL8367C_REG_SSC_RDM_SEED1 0x1d4c - -#define RTL8367C_REG_SSC_PN_POLY_SEL1 0x1d4d - -#define RTL8367C_REG_SSC_CTRL1_3 0x1d4e -#define RTL8367C_SSC_CTRL1_3_PHSFT_CNT_OFFSET 8 -#define RTL8367C_SSC_CTRL1_3_PHSFT_CNT_MASK 0x7F00 -#define RTL8367C_SSC_CTRL1_3_PHSFT_A_OFFSET 7 -#define RTL8367C_SSC_CTRL1_3_PHSFT_A_MASK 0x80 -#define RTL8367C_SSC_CTRL1_3_PHSFT_B_OFFSET 6 -#define RTL8367C_SSC_CTRL1_3_PHSFT_B_MASK 0x40 -#define RTL8367C_SSC_CTRL1_3_PHSFT_UPDN_OFFSET 5 -#define RTL8367C_SSC_CTRL1_3_PHSFT_UPDN_MASK 0x20 -#define RTL8367C_SSC_CTRL1_3_PHSFT_PRD_OFFSET 4 -#define RTL8367C_SSC_CTRL1_3_PHSFT_PRD_MASK 0x10 -#define RTL8367C_SSC_CTRL1_3_PN_POLY_DEG_OFFSET 0 -#define RTL8367C_SSC_CTRL1_3_PN_POLY_DEG_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL1_4 0x1d4f -#define RTL8367C_SSC_CTRL1_4_SSC_UP1DN0_OFFSET 15 -#define RTL8367C_SSC_CTRL1_4_SSC_UP1DN0_MASK 0x8000 -#define RTL8367C_SSC_CTRL1_4_SSC_PERIOD_OFFSET 8 -#define RTL8367C_SSC_CTRL1_4_SSC_PERIOD_MASK 0x7F00 -#define RTL8367C_SSC_CTRL1_4_SSC_OFFSET_OFFSET 0 -#define RTL8367C_SSC_CTRL1_4_SSC_OFFSET_MASK 0xFF - -#define RTL8367C_REG_SSC_CTRL1_5 0x1d50 -#define RTL8367C_SSC_CTRL1_5_PH_OFS_TOG_OFFSET 15 -#define RTL8367C_SSC_CTRL1_5_PH_OFS_TOG_MASK 0x8000 -#define RTL8367C_SSC_CTRL1_5_PH_OFS_OFFSET 10 -#define RTL8367C_SSC_CTRL1_5_PH_OFS_MASK 0x7C00 -#define RTL8367C_SSC_CTRL1_5_SSC_STEP_OFFSET 4 -#define RTL8367C_SSC_CTRL1_5_SSC_STEP_MASK 0x3F0 -#define RTL8367C_SSC_CTRL1_5_SSC_TEST_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL1_5_SSC_TEST_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL1_5_SSC_PH_CFG_OFFSET 0 -#define RTL8367C_SSC_CTRL1_5_SSC_PH_CFG_MASK 0x3 - -#define RTL8367C_REG_SSC_STS1 0x1d51 -#define RTL8367C_SSC_STS1_OFS_BUSY_OFFSET 13 -#define RTL8367C_SSC_STS1_OFS_BUSY_MASK 0x2000 -#define RTL8367C_SSC_STS1_OFS_TOTAL_R_OFFSET 8 -#define RTL8367C_SSC_STS1_OFS_TOTAL_R_MASK 0x1F00 -#define RTL8367C_SSC_STS1_CNT_GRY0_OFFSET 4 -#define RTL8367C_SSC_STS1_CNT_GRY0_MASK 0xF0 -#define RTL8367C_SSC_STS1_OFS_GRY0_OFFSET 0 -#define RTL8367C_SSC_STS1_OFS_GRY0_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL2_0 0x1d52 -#define RTL8367C_SSC_CTRL2_0_SSC_TYPE_OFFSET 13 -#define RTL8367C_SSC_CTRL2_0_SSC_TYPE_MASK 0x2000 -#define RTL8367C_SSC_CTRL2_0_PHASE_LIM_SEL_OFFSET 5 -#define RTL8367C_SSC_CTRL2_0_PHASE_LIM_SEL_MASK 0x1FE0 -#define RTL8367C_SSC_CTRL2_0_PHASE_LIM_EN_OFFSET 4 -#define RTL8367C_SSC_CTRL2_0_PHASE_LIM_EN_MASK 0x10 -#define RTL8367C_SSC_CTRL2_0_DLL_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL2_0_DLL_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL2_0_SSC_EN_OFFSET 1 -#define RTL8367C_SSC_CTRL2_0_SSC_EN_MASK 0x2 -#define RTL8367C_SSC_CTRL2_0_SSC_MODE_OFFSET 0 -#define RTL8367C_SSC_CTRL2_0_SSC_MODE_MASK 0x1 - -#define RTL8367C_REG_SSC_RDM_SEED2 0x1d53 - -#define RTL8367C_REG_SSC_PN_POLY_SEL2 0x1d54 - -#define RTL8367C_REG_SSC_CTRL2_3 0x1d55 -#define RTL8367C_SSC_CTRL2_3_PHSFT_CNT_OFFSET 8 -#define RTL8367C_SSC_CTRL2_3_PHSFT_CNT_MASK 0x7F00 -#define RTL8367C_SSC_CTRL2_3_PHSFT_A_OFFSET 7 -#define RTL8367C_SSC_CTRL2_3_PHSFT_A_MASK 0x80 -#define RTL8367C_SSC_CTRL2_3_PHSFT_B_OFFSET 6 -#define RTL8367C_SSC_CTRL2_3_PHSFT_B_MASK 0x40 -#define RTL8367C_SSC_CTRL2_3_PHSFT_UPDN_OFFSET 5 -#define RTL8367C_SSC_CTRL2_3_PHSFT_UPDN_MASK 0x20 -#define RTL8367C_SSC_CTRL2_3_PHSFT_PRD_OFFSET 4 -#define RTL8367C_SSC_CTRL2_3_PHSFT_PRD_MASK 0x10 -#define RTL8367C_SSC_CTRL2_3_PN_POLY_DEG_OFFSET 0 -#define RTL8367C_SSC_CTRL2_3_PN_POLY_DEG_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL2_4 0x1d56 -#define RTL8367C_SSC_CTRL2_4_SSC_UP1DN0_OFFSET 15 -#define RTL8367C_SSC_CTRL2_4_SSC_UP1DN0_MASK 0x8000 -#define RTL8367C_SSC_CTRL2_4_SSC_PERIOD_OFFSET 8 -#define RTL8367C_SSC_CTRL2_4_SSC_PERIOD_MASK 0x7F00 -#define RTL8367C_SSC_CTRL2_4_SSC_OFFSET_OFFSET 0 -#define RTL8367C_SSC_CTRL2_4_SSC_OFFSET_MASK 0xFF - -#define RTL8367C_REG_SSC_CTRL2_5 0x1d57 -#define RTL8367C_SSC_CTRL2_5_PH_OFS_TOG_OFFSET 15 -#define RTL8367C_SSC_CTRL2_5_PH_OFS_TOG_MASK 0x8000 -#define RTL8367C_SSC_CTRL2_5_PH_OFS_OFFSET 10 -#define RTL8367C_SSC_CTRL2_5_PH_OFS_MASK 0x7C00 -#define RTL8367C_SSC_CTRL2_5_SSC_STEP_OFFSET 4 -#define RTL8367C_SSC_CTRL2_5_SSC_STEP_MASK 0x3F0 -#define RTL8367C_SSC_CTRL2_5_SSC_TEST_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL2_5_SSC_TEST_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL2_5_SSC_PH_CFG_OFFSET 0 -#define RTL8367C_SSC_CTRL2_5_SSC_PH_CFG_MASK 0x3 - -#define RTL8367C_REG_SSC_STS2 0x1d58 -#define RTL8367C_SSC_STS2_OFS_BUSY_OFFSET 13 -#define RTL8367C_SSC_STS2_OFS_BUSY_MASK 0x2000 -#define RTL8367C_SSC_STS2_OFS_TOTAL_R_OFFSET 8 -#define RTL8367C_SSC_STS2_OFS_TOTAL_R_MASK 0x1F00 -#define RTL8367C_SSC_STS2_CNT_GRY0_OFFSET 4 -#define RTL8367C_SSC_STS2_CNT_GRY0_MASK 0xF0 -#define RTL8367C_SSC_STS2_OFS_GRY0_OFFSET 0 -#define RTL8367C_SSC_STS2_OFS_GRY0_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL3_0 0x1d59 -#define RTL8367C_SSC_CTRL3_0_SSC_TYPE_OFFSET 13 -#define RTL8367C_SSC_CTRL3_0_SSC_TYPE_MASK 0x2000 -#define RTL8367C_SSC_CTRL3_0_PHASE_LIM_SEL_OFFSET 5 -#define RTL8367C_SSC_CTRL3_0_PHASE_LIM_SEL_MASK 0x1FE0 -#define RTL8367C_SSC_CTRL3_0_PHASE_LIM_EN_OFFSET 4 -#define RTL8367C_SSC_CTRL3_0_PHASE_LIM_EN_MASK 0x10 -#define RTL8367C_SSC_CTRL3_0_DLL_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL3_0_DLL_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL3_0_SSC_EN_OFFSET 1 -#define RTL8367C_SSC_CTRL3_0_SSC_EN_MASK 0x2 -#define RTL8367C_SSC_CTRL3_0_SSC_MODE_OFFSET 0 -#define RTL8367C_SSC_CTRL3_0_SSC_MODE_MASK 0x1 - -#define RTL8367C_REG_SSC_RDM_SEED3 0x1d5a - -#define RTL8367C_REG_SSC_PN_POLY_SEL3 0x1d5b - -#define RTL8367C_REG_SSC_CTRL3_3 0x1d5c -#define RTL8367C_SSC_CTRL3_3_PHSFT_CNT_OFFSET 8 -#define RTL8367C_SSC_CTRL3_3_PHSFT_CNT_MASK 0x7F00 -#define RTL8367C_SSC_CTRL3_3_PHSFT_A_OFFSET 7 -#define RTL8367C_SSC_CTRL3_3_PHSFT_A_MASK 0x80 -#define RTL8367C_SSC_CTRL3_3_PHSFT_B_OFFSET 6 -#define RTL8367C_SSC_CTRL3_3_PHSFT_B_MASK 0x40 -#define RTL8367C_SSC_CTRL3_3_PHSFT_UPDN_OFFSET 5 -#define RTL8367C_SSC_CTRL3_3_PHSFT_UPDN_MASK 0x20 -#define RTL8367C_SSC_CTRL3_3_PHSFT_PRD_OFFSET 4 -#define RTL8367C_SSC_CTRL3_3_PHSFT_PRD_MASK 0x10 -#define RTL8367C_SSC_CTRL3_3_PN_POLY_DEG_OFFSET 0 -#define RTL8367C_SSC_CTRL3_3_PN_POLY_DEG_MASK 0xF - -#define RTL8367C_REG_SSC_CTRL3_4 0x1d5d -#define RTL8367C_SSC_CTRL3_4_SSC_UP1DN0_OFFSET 15 -#define RTL8367C_SSC_CTRL3_4_SSC_UP1DN0_MASK 0x8000 -#define RTL8367C_SSC_CTRL3_4_SSC_PERIOD_OFFSET 8 -#define RTL8367C_SSC_CTRL3_4_SSC_PERIOD_MASK 0x7F00 -#define RTL8367C_SSC_CTRL3_4_SSC_OFFSET_OFFSET 0 -#define RTL8367C_SSC_CTRL3_4_SSC_OFFSET_MASK 0xFF - -#define RTL8367C_REG_SSC_CTRL3_5 0x1d5e -#define RTL8367C_SSC_CTRL3_5_PH_OFS_TOG_OFFSET 15 -#define RTL8367C_SSC_CTRL3_5_PH_OFS_TOG_MASK 0x8000 -#define RTL8367C_SSC_CTRL3_5_PH_OFS_OFFSET 10 -#define RTL8367C_SSC_CTRL3_5_PH_OFS_MASK 0x7C00 -#define RTL8367C_SSC_CTRL3_5_SSC_STEP_OFFSET 4 -#define RTL8367C_SSC_CTRL3_5_SSC_STEP_MASK 0x3F0 -#define RTL8367C_SSC_CTRL3_5_SSC_TEST_MODE_OFFSET 2 -#define RTL8367C_SSC_CTRL3_5_SSC_TEST_MODE_MASK 0xC -#define RTL8367C_SSC_CTRL3_5_SSC_PH_CFG_OFFSET 0 -#define RTL8367C_SSC_CTRL3_5_SSC_PH_CFG_MASK 0x3 - -#define RTL8367C_REG_SSC_STS3 0x1d5f -#define RTL8367C_SSC_STS3_OFS_BUSY_OFFSET 13 -#define RTL8367C_SSC_STS3_OFS_BUSY_MASK 0x2000 -#define RTL8367C_SSC_STS3_OFS_TOTAL_R_OFFSET 8 -#define RTL8367C_SSC_STS3_OFS_TOTAL_R_MASK 0x1F00 -#define RTL8367C_SSC_STS3_CNT_GRY0_OFFSET 4 -#define RTL8367C_SSC_STS3_CNT_GRY0_MASK 0xF0 -#define RTL8367C_SSC_STS3_OFS_GRY0_OFFSET 0 -#define RTL8367C_SSC_STS3_OFS_GRY0_MASK 0xF - -#define RTL8367C_REG_PHY_POLL_CFG13 0x1d60 - -#define RTL8367C_REG_PHY_POLL_CFG14 0x1d61 - -#define RTL8367C_REG_FRC_SYS_CLK 0x1d62 -#define RTL8367C_SYSCLK_FRC_MD_OFFSET 1 -#define RTL8367C_SYSCLK_FRC_MD_MASK 0x2 -#define RTL8367C_SYSCLK_FRC_VAL_OFFSET 0 -#define RTL8367C_SYSCLK_FRC_VAL_MASK 0x1 - -#define RTL8367C_REG_AFE_SSC_CTRL 0x1d63 -#define RTL8367C_PH_RSTB_TXD1_OFFSET 9 -#define RTL8367C_PH_RSTB_TXD1_MASK 0x200 -#define RTL8367C_PH_RSTB_TXC1_OFFSET 8 -#define RTL8367C_PH_RSTB_TXC1_MASK 0x100 -#define RTL8367C_PH_RSTB_TXD0_OFFSET 7 -#define RTL8367C_PH_RSTB_TXD0_MASK 0x80 -#define RTL8367C_PH_RSTB_TXC0_OFFSET 6 -#define RTL8367C_PH_RSTB_TXC0_MASK 0x40 -#define RTL8367C_PH_RSTBSYS_OFFSET 5 -#define RTL8367C_PH_RSTBSYS_MASK 0x20 -#define RTL8367C_PH_RSTB8051_OFFSET 4 -#define RTL8367C_PH_RSTB8051_MASK 0x10 -#define RTL8367C_OREG_SSC_OFFSET 0 -#define RTL8367C_OREG_SSC_MASK 0xF - -#define RTL8367C_REG_BUFF_RST_CTRL0 0x1d64 -#define RTL8367C_BUFFRST_TXESD_EN_OFFSET 13 -#define RTL8367C_BUFFRST_TXESD_EN_MASK 0x2000 -#define RTL8367C_BUFF_RST_TIME_LONG_OFFSET 8 -#define RTL8367C_BUFF_RST_TIME_LONG_MASK 0x1F00 -#define RTL8367C_BUFF_RST_TIME_SHORT_OFFSET 3 -#define RTL8367C_BUFF_RST_TIME_SHORT_MASK 0xF8 -#define RTL8367C_SW_BUFF_RST_OFFSET 2 -#define RTL8367C_SW_BUFF_RST_MASK 0x4 -#define RTL8367C_IMS_BUFF_RST_OFFSET 1 -#define RTL8367C_IMS_BUFF_RST_MASK 0x2 -#define RTL8367C_IMR_BUFF_RST_OFFSET 0 -#define RTL8367C_IMR_BUFF_RST_MASK 0x1 - -#define RTL8367C_REG_BUFF_RST_CTRL1 0x1d65 -#define RTL8367C_BUFFRST_SYSOVER_EN_OFFSET 10 -#define RTL8367C_BUFFRST_SYSOVER_EN_MASK 0x400 -#define RTL8367C_BUFFRST_SYSOVER_THR_OFFSET 0 -#define RTL8367C_BUFFRST_SYSOVER_THR_MASK 0x3FF - -#define RTL8367C_REG_BUFF_RST_CTRL2 0x1d66 -#define RTL8367C_BUFFRST_QOVER_EN_OFFSET 10 -#define RTL8367C_BUFFRST_QOVER_EN_MASK 0x400 -#define RTL8367C_BUFFRST_QOVER_THR_OFFSET 0 -#define RTL8367C_BUFFRST_QOVER_THR_MASK 0x3FF - -#define RTL8367C_REG_BUFF_RST_CTRL3 0x1d67 -#define RTL8367C_DSC_TIMER_OFFSET 11 -#define RTL8367C_DSC_TIMER_MASK 0x7800 -#define RTL8367C_BUFFRST_DSCOVER_THR_OFFSET 1 -#define RTL8367C_BUFFRST_DSCOVER_THR_MASK 0x7FE -#define RTL8367C_BUFFRST_DSCOVER_EN_OFFSET 0 -#define RTL8367C_BUFFRST_DSCOVER_EN_MASK 0x1 - -#define RTL8367C_REG_BUFF_RST_CTRL4 0x1d68 -#define RTL8367C_INDSC_TIMER_OFFSET 11 -#define RTL8367C_INDSC_TIMER_MASK 0x7800 -#define RTL8367C_BUFFRST_INDSCOVER_THR_OFFSET 1 -#define RTL8367C_BUFFRST_INDSCOVER_THR_MASK 0x7FE -#define RTL8367C_BUFFRST_INDSCOVER_EN_OFFSET 0 -#define RTL8367C_BUFFRST_INDSCOVER_EN_MASK 0x1 - -#define RTL8367C_REG_BUFF_RST_CTRL5 0x1d69 -#define RTL8367C_TX_ESD_MODE_OFFSET 8 -#define RTL8367C_TX_ESD_MODE_MASK 0x100 -#define RTL8367C_TX_ESD_LVL_OFFSET 0 -#define RTL8367C_TX_ESD_LVL_MASK 0xFF - -#define RTL8367C_REG_TOP_CON0 0x1d70 -#define RTL8367C_TOP_CON0_SDS_PWR_ISO_1_OFFSET 15 -#define RTL8367C_TOP_CON0_SDS_PWR_ISO_1_MASK 0x8000 -#define RTL8367C_OCP_TIMEOUT_P7_5_OFFSET 12 -#define RTL8367C_OCP_TIMEOUT_P7_5_MASK 0x7000 -#define RTL8367C_FIB_EEE_AB_OFFSET 11 -#define RTL8367C_FIB_EEE_AB_MASK 0x800 -#define RTL8367C_ADCCKIEN_OFFSET 10 -#define RTL8367C_ADCCKIEN_MASK 0x400 -#define RTL8367C_OCP_TIMEOUT_OFFSET 5 -#define RTL8367C_OCP_TIMEOUT_MASK 0x3E0 -#define RTL8367C_TOP_CON0_SDS_PWR_ISO_OFFSET 4 -#define RTL8367C_TOP_CON0_SDS_PWR_ISO_MASK 0x10 -#define RTL8367C_RG2_TXC_SEL_OFFSET 3 -#define RTL8367C_RG2_TXC_SEL_MASK 0x8 -#define RTL8367C_RG1TXC_SEL_OFFSET 2 -#define RTL8367C_RG1TXC_SEL_MASK 0x4 -#define RTL8367C_SYNC_1588_EN_OFFSET 1 -#define RTL8367C_SYNC_1588_EN_MASK 0x2 -#define RTL8367C_LS_MODE_OFFSET 0 -#define RTL8367C_LS_MODE_MASK 0x1 - -#define RTL8367C_REG_TOP_CON1 0x1d71 -#define RTL8367C_TA_CHK_EN_OFFSET 2 -#define RTL8367C_TA_CHK_EN_MASK 0x4 -#define RTL8367C_SLV_EG_SEL_OFFSET 1 -#define RTL8367C_SLV_EG_SEL_MASK 0x2 -#define RTL8367C_IIC_OP_DRAIN_OFFSET 0 -#define RTL8367C_IIC_OP_DRAIN_MASK 0x1 - -#define RTL8367C_REG_SWR_FPWM 0x1d72 -#define RTL8367C_SWR_FPWM_OFFSET 0 -#define RTL8367C_SWR_FPWM_MASK 0x1 - -#define RTL8367C_REG_EEEP_CTRL_500M 0x1d73 - -#define RTL8367C_REG_SHORT_PRMB 0x1d74 -#define RTL8367C_SHORT_PRMB_OFFSET 0 -#define RTL8367C_SHORT_PRMB_MASK 0x1 - -#define RTL8367C_REG_INDSC_THR_CTRL 0x1d75 -#define RTL8367C_INDSC_THR_CTRL_OFFSET 0 -#define RTL8367C_INDSC_THR_CTRL_MASK 0x7FF - -#define RTL8367C_REG_SET_PAD_CTRL_NEW 0x1d80 -#define RTL8367C_SET_PAD_CTRL_NEW_OFFSET 0 -#define RTL8367C_SET_PAD_CTRL_NEW_MASK 0x1 - -#define RTL8367C_REG_SET_PAD_DRI_0 0x1d81 - -#define RTL8367C_REG_SET_PAD_DRI_1 0x1d82 - -#define RTL8367C_REG_SET_PAD_DRI_2 0x1d83 - -#define RTL8367C_REG_SET_PAD_SLEW_0 0x1d84 - -#define RTL8367C_REG_SET_PAD_SLEW_1 0x1d85 - -#define RTL8367C_REG_SET_PAD_SLEW_2 0x1d86 - -#define RTL8367C_REG_SET_PAD_SMT_0 0x1d87 - -#define RTL8367C_REG_SET_PAD_SMT_1 0x1d88 - -#define RTL8367C_REG_SET_PAD_SMT_2 0x1d89 - -#define RTL8367C_REG_M_I2C_CTL_STA_REG 0x1d8a -#define RTL8367C_TX_RX_DATA_OFFSET 8 -#define RTL8367C_TX_RX_DATA_MASK 0xFF00 -#define RTL8367C_DUMB_RW_ERR_OFFSET 7 -#define RTL8367C_DUMB_RW_ERR_MASK 0x80 -#define RTL8367C_SLV_ACK_FLAG_OFFSET 6 -#define RTL8367C_SLV_ACK_FLAG_MASK 0x40 -#define RTL8367C_M_I2C_BUS_IDLE_OFFSET 5 -#define RTL8367C_M_I2C_BUS_IDLE_MASK 0x20 -#define RTL8367C_I2C_CMD_TYPE_OFFSET 1 -#define RTL8367C_I2C_CMD_TYPE_MASK 0x1E -#define RTL8367C_I2C_CMD_EXEC_OFFSET 0 -#define RTL8367C_I2C_CMD_EXEC_MASK 0x1 - -#define RTL8367C_REG_M_I2C_DUMB_RW_ADDR_0 0x1d8b - -#define RTL8367C_REG_M_I2C_DUMB_RW_ADDR_1 0x1d8c - -#define RTL8367C_REG_M_I2C_DUMB_RW_DATA_0 0x1d8d - -#define RTL8367C_REG_M_I2C_DUMB_RW_DATA_1 0x1d8e - -#define RTL8367C_REG_M_I2C_DUMB_RW_CTL 0x1d8f -#define RTL8367C_DUMB_I2C_CTL_CODE_OFFSET 8 -#define RTL8367C_DUMB_I2C_CTL_CODE_MASK 0x7F00 -#define RTL8367C_DUMB_RW_I2C_FORMAT_OFFSET 4 -#define RTL8367C_DUMB_RW_I2C_FORMAT_MASK 0x10 -#define RTL8367C_DUMB_RW_DATA_MODE_OFFSET 2 -#define RTL8367C_DUMB_RW_DATA_MODE_MASK 0xC -#define RTL8367C_DUMB_RW_ADDR_MODE_OFFSET 0 -#define RTL8367C_DUMB_RW_ADDR_MODE_MASK 0x3 - -#define RTL8367C_REG_M_I2C_SYS_CTL 0x1d90 -#define RTL8367C_M_I2C_SCL_IO_MUX_OFFSET 12 -#define RTL8367C_M_I2C_SCL_IO_MUX_MASK 0x3000 -#define RTL8367C_M_I2C_SDA_IO_MUX_OFFSET 10 -#define RTL8367C_M_I2C_SDA_IO_MUX_MASK 0xC00 -#define RTL8367C_M_I2C_SDA_OD_EN_OFFSET 9 -#define RTL8367C_M_I2C_SDA_OD_EN_MASK 0x200 -#define RTL8367C_M_I2C_SCL_OD_EN_OFFSET 8 -#define RTL8367C_M_I2C_SCL_OD_EN_MASK 0x100 -#define RTL8367C_M_I2C_SCL_F_DIV_OFFSET 0 -#define RTL8367C_M_I2C_SCL_F_DIV_MASK 0xFF - -#define RTL8367C_REG_HT_PB_SRAM_CTRL 0x1da0 -#define RTL8367C_HTPB_RW_OFFSET 2 -#define RTL8367C_HTPB_RW_MASK 0x4 -#define RTL8367C_HTPB_SEL_OFFSET 1 -#define RTL8367C_HTPB_SEL_MASK 0x2 -#define RTL8367C_HTPB_CE_OFFSET 0 -#define RTL8367C_HTPB_CE_MASK 0x1 - -#define RTL8367C_REG_HT_PB_SRAM_ADDR 0x1da1 - -#define RTL8367C_REG_HT_PB_SRAM_DIN0 0x1da2 - -#define RTL8367C_REG_HT_PB_SRAM_DIN1 0x1da3 - -#define RTL8367C_REG_HT_PB_SRAM_DOUT0 0x1da4 - -#define RTL8367C_REG_HT_PB_SRAM_DOUT1 0x1da5 - -#define RTL8367C_REG_PHY_STAT_0 0x1db0 - -#define RTL8367C_REG_PHY_STAT_1 0x1db1 - -#define RTL8367C_REG_PHY_STAT_2 0x1db2 - -#define RTL8367C_REG_PHY_STAT_3 0x1db3 - -#define RTL8367C_REG_PHY_STAT_4 0x1db4 - -#define RTL8367C_REG_PHY_STAT_5 0x1db5 - -#define RTL8367C_REG_PHY_STAT_6 0x1db6 - -#define RTL8367C_REG_PHY_STAT_7 0x1db7 - -#define RTL8367C_REG_SDS_STAT_0 0x1db8 - -#define RTL8367C_REG_SDS_STAT_1 0x1db9 - -#define RTL8367C_REG_MAC_LINK_STAT_0 0x1dba -#define RTL8367C_MAC_LINK_STAT_CUR_0_OFFSET 8 -#define RTL8367C_MAC_LINK_STAT_CUR_0_MASK 0xFF00 -#define RTL8367C_MAC_LINK_STAT_LATCH_0_OFFSET 0 -#define RTL8367C_MAC_LINK_STAT_LATCH_0_MASK 0xFF - -#define RTL8367C_REG_MAC_LINK_STAT_1 0x1dbb -#define RTL8367C_MAC_LINK_STAT_1_Reserved_OFFSET 6 -#define RTL8367C_MAC_LINK_STAT_1_Reserved_MASK 0xFFC0 -#define RTL8367C_MAC_LINK_STAT_CUR_1_OFFSET 3 -#define RTL8367C_MAC_LINK_STAT_CUR_1_MASK 0x38 -#define RTL8367C_MAC_LINK_STAT_LATCH_1_OFFSET 0 -#define RTL8367C_MAC_LINK_STAT_LATCH_1_MASK 0x7 - -#define RTL8367C_REG_MISC_CONTROL_1 0x1dc0 -#define RTL8367C_P7_FB_CPL_OFFSET 2 -#define RTL8367C_P7_FB_CPL_MASK 0x4 -#define RTL8367C_P6_FB_CPL_OFFSET 1 -#define RTL8367C_P6_FB_CPL_MASK 0x2 -#define RTL8367C_P5_FB_CPL_OFFSET 0 -#define RTL8367C_P5_FB_CPL_MASK 0x1 - -#define RTL8367C_REG_SDS_MISC_1 0x1dc1 -#define RTL8367C_CFG_SGMII_RXFC_1_OFFSET 14 -#define RTL8367C_CFG_SGMII_RXFC_1_MASK 0x4000 -#define RTL8367C_CFG_SGMII_TXFC_1_OFFSET 13 -#define RTL8367C_CFG_SGMII_TXFC_1_MASK 0x2000 -#define RTL8367C_CFG_MAC9_SEL_HSGMII_OFFSET 11 -#define RTL8367C_CFG_MAC9_SEL_HSGMII_MASK 0x800 -#define RTL8367C_CFG_SGMII_FDUP_1_OFFSET 10 -#define RTL8367C_CFG_SGMII_FDUP_1_MASK 0x400 -#define RTL8367C_CFG_SGMII_LINK_1_OFFSET 9 -#define RTL8367C_CFG_SGMII_LINK_1_MASK 0x200 -#define RTL8367C_CFG_SGMII_SPD_1_OFFSET 7 -#define RTL8367C_CFG_SGMII_SPD_1_MASK 0x180 -#define RTL8367C_CFG_MAC9_SEL_SGMII_OFFSET 6 -#define RTL8367C_CFG_MAC9_SEL_SGMII_MASK 0x40 -#define RTL8367C_CFG_SDS_MODE_14C_1_OFFSET 0 -#define RTL8367C_CFG_SDS_MODE_14C_1_MASK 0x7 - -#define RTL8367C_REG_FIBER_CFG_2_1 0x1dc2 -#define RTL8367C_SDS_RX_DISABLE_1_OFFSET 6 -#define RTL8367C_SDS_RX_DISABLE_1_MASK 0xC0 -#define RTL8367C_SDS_TX_DISABLE_1_OFFSET 4 -#define RTL8367C_SDS_TX_DISABLE_1_MASK 0x30 -#define RTL8367C_FIBER_CFG_2_1_SDS_PWR_ISO_1_OFFSET 2 -#define RTL8367C_FIBER_CFG_2_1_SDS_PWR_ISO_1_MASK 0xC -#define RTL8367C_SDS_FRC_LD_1_OFFSET 0 -#define RTL8367C_SDS_FRC_LD_1_MASK 0x3 - -#define RTL8367C_REG_FIBER_CFG_1_1 0x1dc3 -#define RTL8367C_SDS_FRC_REG4_1_OFFSET 12 -#define RTL8367C_SDS_FRC_REG4_1_MASK 0x1000 -#define RTL8367C_SDS_FRC_REG4_FIB100_1_OFFSET 11 -#define RTL8367C_SDS_FRC_REG4_FIB100_1_MASK 0x800 -#define RTL8367C_SDS_FRC_MODE_1_OFFSET 3 -#define RTL8367C_SDS_FRC_MODE_1_MASK 0x8 -#define RTL8367C_SDS_MODE_1_OFFSET 0 -#define RTL8367C_SDS_MODE_1_MASK 0x7 - -#define RTL8367C_REG_PHYSTS_CTRL0_1 0x1dc4 -#define RTL8367C_LNKUP_DLY_EN_EXT2_OFFSET 9 -#define RTL8367C_LNKUP_DLY_EN_EXT2_MASK 0x200 -#define RTL8367C_GE_100M_LNKUP_DLY_EXT2_OFFSET 7 -#define RTL8367C_GE_100M_LNKUP_DLY_EXT2_MASK 0x180 -#define RTL8367C_PHYSTS_10M_LNKUP_DLY_EXT2_OFFSET 5 -#define RTL8367C_PHYSTS_10M_LNKUP_DLY_EXT2_MASK 0x60 -#define RTL8367C_LNKUP_DLY_EN_EXT1_OFFSET 4 -#define RTL8367C_LNKUP_DLY_EN_EXT1_MASK 0x10 -#define RTL8367C_GE_100M_LNKUP_DLY_EXT1_OFFSET 2 -#define RTL8367C_GE_100M_LNKUP_DLY_EXT1_MASK 0xC -#define RTL8367C_PHYSTS_10M_LNKUP_DLY_EXT1_OFFSET 0 -#define RTL8367C_PHYSTS_10M_LNKUP_DLY_EXT1_MASK 0x3 - -#define RTL8367C_REG_FIBER_CFG_3_1 0x1dc5 -#define RTL8367C_FIBER_CFG_3_1_OFFSET 0 -#define RTL8367C_FIBER_CFG_3_1_MASK 0xFFF - -#define RTL8367C_REG_FIBER_CFG_4_1 0x1dc6 - -#define RTL8367C_REG_BUFF_RST_CTRL2_2 0x1dc7 -#define RTL8367C_Cfg_buffrst_sysover_thr_1_OFFSET 3 -#define RTL8367C_Cfg_buffrst_sysover_thr_1_MASK 0x8 -#define RTL8367C_Cfg_buffrst_qover_thr_OFFSET 2 -#define RTL8367C_Cfg_buffrst_qover_thr_MASK 0x4 -#define RTL8367C_Cfg_buffrst_indscover_thr_1_OFFSET 1 -#define RTL8367C_Cfg_buffrst_indscover_thr_1_MASK 0x2 -#define RTL8367C_Cfg_buffrst_dscover_thr_1_OFFSET 0 -#define RTL8367C_Cfg_buffrst_dscover_thr_1_MASK 0x1 - -#define RTL8367C_REG_PHY_DEBUG_CNT_CTRL 0x1dc8 -#define RTL8367C_PHY_MIB_RST_7_OFFSET 15 -#define RTL8367C_PHY_MIB_RST_7_MASK 0x8000 -#define RTL8367C_PHY_MIB_RST_6_OFFSET 14 -#define RTL8367C_PHY_MIB_RST_6_MASK 0x4000 -#define RTL8367C_PHY_MIB_RST_5_OFFSET 13 -#define RTL8367C_PHY_MIB_RST_5_MASK 0x2000 -#define RTL8367C_PHY_MIB_RST_4_OFFSET 12 -#define RTL8367C_PHY_MIB_RST_4_MASK 0x1000 -#define RTL8367C_PHY_MIB_RST_3_OFFSET 11 -#define RTL8367C_PHY_MIB_RST_3_MASK 0x800 -#define RTL8367C_PHY_MIB_RST_2_OFFSET 10 -#define RTL8367C_PHY_MIB_RST_2_MASK 0x400 -#define RTL8367C_PHY_MIB_RST_1_OFFSET 9 -#define RTL8367C_PHY_MIB_RST_1_MASK 0x200 -#define RTL8367C_PHY_MIB_RST_0_OFFSET 8 -#define RTL8367C_PHY_MIB_RST_0_MASK 0x100 -#define RTL8367C_PHY_MIB_EN_7_OFFSET 7 -#define RTL8367C_PHY_MIB_EN_7_MASK 0x80 -#define RTL8367C_PHY_MIB_EN_6_OFFSET 6 -#define RTL8367C_PHY_MIB_EN_6_MASK 0x40 -#define RTL8367C_PHY_MIB_EN_5_OFFSET 5 -#define RTL8367C_PHY_MIB_EN_5_MASK 0x20 -#define RTL8367C_PHY_MIB_EN_4_OFFSET 4 -#define RTL8367C_PHY_MIB_EN_4_MASK 0x10 -#define RTL8367C_PHY_MIB_EN_3_OFFSET 3 -#define RTL8367C_PHY_MIB_EN_3_MASK 0x8 -#define RTL8367C_PHY_MIB_EN_2_OFFSET 2 -#define RTL8367C_PHY_MIB_EN_2_MASK 0x4 -#define RTL8367C_PHY_MIB_EN_1_OFFSET 1 -#define RTL8367C_PHY_MIB_EN_1_MASK 0x2 -#define RTL8367C_PHY_MIB_EN_0_OFFSET 0 -#define RTL8367C_PHY_MIB_EN_0_MASK 0x1 - -#define RTL8367C_REG_TXPKT_CNT_L_0 0x1dc9 - -#define RTL8367C_REG_TXPKT_CNT_H_0 0x1dca - -#define RTL8367C_REG_RXPKT_CNT_L_0 0x1dcb - -#define RTL8367C_REG_RXPKT_CNT_H_0 0x1dcc - -#define RTL8367C_REG_TX_CRC_0 0x1dcd - -#define RTL8367C_REG_RX_CRC_0 0x1dce - -#define RTL8367C_REG_TXPKT_CNT_L_1 0x1dcf - -#define RTL8367C_REG_TXPKT_CNT_H_1 0x1dd0 - -#define RTL8367C_REG_RXPKT_CNT_L_1 0x1dd1 - -#define RTL8367C_REG_RXPKT_CNT_H_1 0x1dd2 - -#define RTL8367C_REG_TX_CRC_1 0x1dd3 - -#define RTL8367C_REG_RX_CRC_1 0x1dd4 - -#define RTL8367C_REG_TXPKT_CNT_L_2 0x1dd5 - -#define RTL8367C_REG_TXPKT_CNT_H_2 0x1dd6 - -#define RTL8367C_REG_RXPKT_CNT_L_2 0x1dd7 - -#define RTL8367C_REG_RXPKT_CNT_H_2 0x1dd8 - -#define RTL8367C_REG_TX_CRC_2 0x1dd9 - -#define RTL8367C_REG_RX_CRC_2 0x1dda - -#define RTL8367C_REG_TXPKT_CNT_L_3 0x1ddb - -#define RTL8367C_REG_TXPKT_CNT_H_3 0x1ddc - -#define RTL8367C_REG_RXPKT_CNT_L_3 0x1ddd - -#define RTL8367C_REG_RXPKT_CNT_H_3 0x1dde - -#define RTL8367C_REG_TX_CRC_3 0x1ddf - -#define RTL8367C_REG_RX_CRC_3 0x1de0 - -#define RTL8367C_REG_TXPKT_CNT_L_4 0x1de1 - -#define RTL8367C_REG_TXPKT_CNT_H_4 0x1de2 - -#define RTL8367C_REG_RXPKT_CNT_L_4 0x1de3 - -#define RTL8367C_REG_RXPKT_CNT_H_4 0x1de4 - -#define RTL8367C_REG_TX_CRC_4 0x1de5 - -#define RTL8367C_REG_RX_CRC_4 0x1de6 - -#define RTL8367C_REG_TXPKT_CNT_L_5 0x1de7 - -#define RTL8367C_REG_TXPKT_CNT_H_5 0x1de8 - -#define RTL8367C_REG_RXPKT_CNT_L_5 0x1de9 - -#define RTL8367C_REG_RXPKT_CNT_H_5 0x1dea - -#define RTL8367C_REG_TX_CRC_5 0x1deb - -#define RTL8367C_REG_RX_CRC_5 0x1dec - -#define RTL8367C_REG_TXPKT_CNT_L_6 0x1ded - -#define RTL8367C_REG_TXPKT_CNT_H_6 0x1dee - -#define RTL8367C_REG_RXPKT_CNT_L_6 0x1def - -#define RTL8367C_REG_RXPKT_CNT_H_6 0x1df0 - -#define RTL8367C_REG_TX_CRC_6 0x1df1 - -#define RTL8367C_REG_RX_CRC_6 0x1df2 - -#define RTL8367C_REG_TXPKT_CNT_L_7 0x1df3 - -#define RTL8367C_REG_TXPKT_CNT_H_7 0x1df4 - -#define RTL8367C_REG_RXPKT_CNT_L_7 0x1df5 - -#define RTL8367C_REG_RXPKT_CNT_H_7 0x1df6 - -#define RTL8367C_REG_TX_CRC_7 0x1df7 - -#define RTL8367C_REG_RX_CRC_7 0x1df8 - -#define RTL8367C_REG_BOND_DBG_0 0x1df9 - -#define RTL8367C_REG_BOND_DBG_1 0x1dfa - -#define RTL8367C_REG_STRP_DBG_0 0x1dfb - -#define RTL8367C_REG_STRP_DBG_1 0x1dfc - -#define RTL8367C_REG_STRP_DBG_2 0x1dfd - -/* (16'h1f00)patch_reg */ - -#define RTL8367C_REG_INDRECT_ACCESS_CTRL 0x1f00 -#define RTL8367C_RW_OFFSET 1 -#define RTL8367C_RW_MASK 0x2 -#define RTL8367C_CMD_OFFSET 0 -#define RTL8367C_CMD_MASK 0x1 - -#define RTL8367C_REG_INDRECT_ACCESS_STATUS 0x1f01 -#define RTL8367C_INDRECT_ACCESS_STATUS_OFFSET 2 -#define RTL8367C_INDRECT_ACCESS_STATUS_MASK 0x7 - -#define RTL8367C_REG_INDRECT_ACCESS_ADDRESS 0x1f02 - -#define RTL8367C_REG_INDRECT_ACCESS_WRITE_DATA 0x1f03 - -#define RTL8367C_REG_INDRECT_ACCESS_READ_DATA 0x1f04 - -/* (16'h6200)fib_page */ - -#define RTL8367C_REG_FIB0_CFG00 0x6200 -#define RTL8367C_FIB0_CFG00_CFG_FIB_RST_OFFSET 15 -#define RTL8367C_FIB0_CFG00_CFG_FIB_RST_MASK 0x8000 -#define RTL8367C_FIB0_CFG00_CFG_FIB_LPK_OFFSET 14 -#define RTL8367C_FIB0_CFG00_CFG_FIB_LPK_MASK 0x4000 -#define RTL8367C_FIB0_CFG00_CFG_FIB_SPD_RD_0_OFFSET 13 -#define RTL8367C_FIB0_CFG00_CFG_FIB_SPD_RD_0_MASK 0x2000 -#define RTL8367C_FIB0_CFG00_CFG_FIB_ANEN_OFFSET 12 -#define RTL8367C_FIB0_CFG00_CFG_FIB_ANEN_MASK 0x1000 -#define RTL8367C_FIB0_CFG00_CFG_FIB_PDOWN_OFFSET 11 -#define RTL8367C_FIB0_CFG00_CFG_FIB_PDOWN_MASK 0x800 -#define RTL8367C_FIB0_CFG00_CFG_FIB_ISO_OFFSET 10 -#define RTL8367C_FIB0_CFG00_CFG_FIB_ISO_MASK 0x400 -#define RTL8367C_FIB0_CFG00_CFG_FIB_RESTART_OFFSET 9 -#define RTL8367C_FIB0_CFG00_CFG_FIB_RESTART_MASK 0x200 -#define RTL8367C_FIB0_CFG00_CFG_FIB_FULLDUP_OFFSET 8 -#define RTL8367C_FIB0_CFG00_CFG_FIB_FULLDUP_MASK 0x100 -#define RTL8367C_FIB0_CFG00_CFG_FIB_SPD_RD_1_OFFSET 6 -#define RTL8367C_FIB0_CFG00_CFG_FIB_SPD_RD_1_MASK 0x40 -#define RTL8367C_FIB0_CFG00_CFG_FIB_FRCTX_OFFSET 5 -#define RTL8367C_FIB0_CFG00_CFG_FIB_FRCTX_MASK 0x20 - -#define RTL8367C_REG_FIB0_CFG01 0x6201 -#define RTL8367C_FIB0_CFG01_CAPBILITY_OFFSET 6 -#define RTL8367C_FIB0_CFG01_CAPBILITY_MASK 0xFFC0 -#define RTL8367C_FIB0_CFG01_AN_COMPLETE_OFFSET 5 -#define RTL8367C_FIB0_CFG01_AN_COMPLETE_MASK 0x20 -#define RTL8367C_FIB0_CFG01_R_FAULT_OFFSET 4 -#define RTL8367C_FIB0_CFG01_R_FAULT_MASK 0x10 -#define RTL8367C_FIB0_CFG01_NWAY_ABILITY_OFFSET 3 -#define RTL8367C_FIB0_CFG01_NWAY_ABILITY_MASK 0x8 -#define RTL8367C_FIB0_CFG01_LINK_STATUS_OFFSET 2 -#define RTL8367C_FIB0_CFG01_LINK_STATUS_MASK 0x4 -#define RTL8367C_FIB0_CFG01_JABBER_DETECT_OFFSET 1 -#define RTL8367C_FIB0_CFG01_JABBER_DETECT_MASK 0x2 -#define RTL8367C_FIB0_CFG01_EXTENDED_CAPBILITY_OFFSET 0 -#define RTL8367C_FIB0_CFG01_EXTENDED_CAPBILITY_MASK 0x1 - -#define RTL8367C_REG_FIB0_CFG02 0x6202 - -#define RTL8367C_REG_FIB0_CFG03 0x6203 -#define RTL8367C_FIB0_CFG03_REALTEK_OUI5_0_OFFSET 10 -#define RTL8367C_FIB0_CFG03_REALTEK_OUI5_0_MASK 0xFC00 -#define RTL8367C_FIB0_CFG03_MODEL_NO_OFFSET 4 -#define RTL8367C_FIB0_CFG03_MODEL_NO_MASK 0x3F0 -#define RTL8367C_FIB0_CFG03_REVISION_NO_OFFSET 0 -#define RTL8367C_FIB0_CFG03_REVISION_NO_MASK 0xF - -#define RTL8367C_REG_FIB0_CFG04 0x6204 - -#define RTL8367C_REG_FIB0_CFG05 0x6205 - -#define RTL8367C_REG_FIB0_CFG06 0x6206 -#define RTL8367C_FIB0_CFG06_FIB_NP_EN_OFFSET 2 -#define RTL8367C_FIB0_CFG06_FIB_NP_EN_MASK 0x4 -#define RTL8367C_FIB0_CFG06_RXPAGE_OFFSET 1 -#define RTL8367C_FIB0_CFG06_RXPAGE_MASK 0x2 - -#define RTL8367C_REG_FIB0_CFG07 0x6207 - -#define RTL8367C_REG_FIB0_CFG08 0x6208 - -#define RTL8367C_REG_FIB0_CFG09 0x6209 - -#define RTL8367C_REG_FIB0_CFG10 0x620a - -#define RTL8367C_REG_FIB0_CFG11 0x620b - -#define RTL8367C_REG_FIB0_CFG12 0x620c - -#define RTL8367C_REG_FIB0_CFG13 0x620d -#define RTL8367C_FIB0_CFG13_INDR_FUNC_OFFSET 14 -#define RTL8367C_FIB0_CFG13_INDR_FUNC_MASK 0xC000 -#define RTL8367C_FIB0_CFG13_DUMMY_OFFSET 5 -#define RTL8367C_FIB0_CFG13_DUMMY_MASK 0x3FE0 -#define RTL8367C_FIB0_CFG13_INDR_DEVAD_OFFSET 0 -#define RTL8367C_FIB0_CFG13_INDR_DEVAD_MASK 0x1F - -#define RTL8367C_REG_FIB0_CFG14 0x620e - -#define RTL8367C_REG_FIB0_CFG15 0x620f - -#define RTL8367C_REG_FIB1_CFG00 0x6210 -#define RTL8367C_FIB1_CFG00_CFG_FIB_RST_OFFSET 15 -#define RTL8367C_FIB1_CFG00_CFG_FIB_RST_MASK 0x8000 -#define RTL8367C_FIB1_CFG00_CFG_FIB_LPK_OFFSET 14 -#define RTL8367C_FIB1_CFG00_CFG_FIB_LPK_MASK 0x4000 -#define RTL8367C_FIB1_CFG00_CFG_FIB_SPD_RD_0_OFFSET 13 -#define RTL8367C_FIB1_CFG00_CFG_FIB_SPD_RD_0_MASK 0x2000 -#define RTL8367C_FIB1_CFG00_CFG_FIB_ANEN_OFFSET 12 -#define RTL8367C_FIB1_CFG00_CFG_FIB_ANEN_MASK 0x1000 -#define RTL8367C_FIB1_CFG00_CFG_FIB_PDOWN_OFFSET 11 -#define RTL8367C_FIB1_CFG00_CFG_FIB_PDOWN_MASK 0x800 -#define RTL8367C_FIB1_CFG00_CFG_FIB_ISO_OFFSET 10 -#define RTL8367C_FIB1_CFG00_CFG_FIB_ISO_MASK 0x400 -#define RTL8367C_FIB1_CFG00_CFG_FIB_RESTART_OFFSET 9 -#define RTL8367C_FIB1_CFG00_CFG_FIB_RESTART_MASK 0x200 -#define RTL8367C_FIB1_CFG00_CFG_FIB_FULLDUP_OFFSET 8 -#define RTL8367C_FIB1_CFG00_CFG_FIB_FULLDUP_MASK 0x100 -#define RTL8367C_FIB1_CFG00_CFG_FIB_SPD_RD_1_OFFSET 6 -#define RTL8367C_FIB1_CFG00_CFG_FIB_SPD_RD_1_MASK 0x40 -#define RTL8367C_FIB1_CFG00_CFG_FIB_FRCTX_OFFSET 5 -#define RTL8367C_FIB1_CFG00_CFG_FIB_FRCTX_MASK 0x20 - -#define RTL8367C_REG_FIB1_CFG01 0x6211 -#define RTL8367C_FIB1_CFG01_CAPBILITY_OFFSET 6 -#define RTL8367C_FIB1_CFG01_CAPBILITY_MASK 0xFFC0 -#define RTL8367C_FIB1_CFG01_AN_COMPLETE_OFFSET 5 -#define RTL8367C_FIB1_CFG01_AN_COMPLETE_MASK 0x20 -#define RTL8367C_FIB1_CFG01_R_FAULT_OFFSET 4 -#define RTL8367C_FIB1_CFG01_R_FAULT_MASK 0x10 -#define RTL8367C_FIB1_CFG01_NWAY_ABILITY_OFFSET 3 -#define RTL8367C_FIB1_CFG01_NWAY_ABILITY_MASK 0x8 -#define RTL8367C_FIB1_CFG01_LINK_STATUS_OFFSET 2 -#define RTL8367C_FIB1_CFG01_LINK_STATUS_MASK 0x4 -#define RTL8367C_FIB1_CFG01_JABBER_DETECT_OFFSET 1 -#define RTL8367C_FIB1_CFG01_JABBER_DETECT_MASK 0x2 -#define RTL8367C_FIB1_CFG01_EXTENDED_CAPBILITY_OFFSET 0 -#define RTL8367C_FIB1_CFG01_EXTENDED_CAPBILITY_MASK 0x1 - -#define RTL8367C_REG_FIB1_CFG02 0x6212 - -#define RTL8367C_REG_FIB1_CFG03 0x6213 -#define RTL8367C_FIB1_CFG03_REALTEK_OUI5_0_OFFSET 10 -#define RTL8367C_FIB1_CFG03_REALTEK_OUI5_0_MASK 0xFC00 -#define RTL8367C_FIB1_CFG03_MODEL_NO_OFFSET 4 -#define RTL8367C_FIB1_CFG03_MODEL_NO_MASK 0x3F0 -#define RTL8367C_FIB1_CFG03_REVISION_NO_OFFSET 0 -#define RTL8367C_FIB1_CFG03_REVISION_NO_MASK 0xF - -#define RTL8367C_REG_FIB1_CFG04 0x6214 - -#define RTL8367C_REG_FIB1_CFG05 0x6215 - -#define RTL8367C_REG_FIB1_CFG06 0x6216 -#define RTL8367C_FIB1_CFG06_FIB_NP_EN_OFFSET 2 -#define RTL8367C_FIB1_CFG06_FIB_NP_EN_MASK 0x4 -#define RTL8367C_FIB1_CFG06_RXPAGE_OFFSET 1 -#define RTL8367C_FIB1_CFG06_RXPAGE_MASK 0x2 - -#define RTL8367C_REG_FIB1_CFG07 0x6217 - -#define RTL8367C_REG_FIB1_CFG08 0x6218 - -#define RTL8367C_REG_FIB1_CFG09 0x6219 - -#define RTL8367C_REG_FIB1_CFG10 0x621a - -#define RTL8367C_REG_FIB1_CFG11 0x621b - -#define RTL8367C_REG_FIB1_CFG12 0x621c - -#define RTL8367C_REG_FIB1_CFG13 0x621d -#define RTL8367C_FIB1_CFG13_INDR_FUNC_OFFSET 14 -#define RTL8367C_FIB1_CFG13_INDR_FUNC_MASK 0xC000 -#define RTL8367C_FIB1_CFG13_DUMMY_OFFSET 5 -#define RTL8367C_FIB1_CFG13_DUMMY_MASK 0x3FE0 -#define RTL8367C_FIB1_CFG13_INDR_DEVAD_OFFSET 0 -#define RTL8367C_FIB1_CFG13_INDR_DEVAD_MASK 0x1F - -#define RTL8367C_REG_FIB1_CFG14 0x621e - -#define RTL8367C_REG_FIB1_CFG15 0x621f - -/* (16'h6400)timer_1588 */ - -#define RTL8367C_REG_PTP_TIME_NSEC_L_NSEC 0x6400 - -#define RTL8367C_REG_PTP_TIME_NSEC_H_NSEC 0x6401 -#define RTL8367C_PTP_TIME_NSEC_H_EXEC_OFFSET 15 -#define RTL8367C_PTP_TIME_NSEC_H_EXEC_MASK 0x8000 -#define RTL8367C_PTP_TIME_NSEC_H_CMD_OFFSET 12 -#define RTL8367C_PTP_TIME_NSEC_H_CMD_MASK 0x3000 -#define RTL8367C_PTP_TIME_NSEC_H_NSEC_OFFSET 0 -#define RTL8367C_PTP_TIME_NSEC_H_NSEC_MASK 0x7FF - -#define RTL8367C_REG_PTP_TIME_SEC_L_SEC 0x6402 - -#define RTL8367C_REG_PTP_TIME_SEC_H_SEC 0x6403 - -#define RTL8367C_REG_PTP_TIME_CFG 0x6404 -#define RTL8367C_CFG_TIMER_EN_FRC_OFFSET 2 -#define RTL8367C_CFG_TIMER_EN_FRC_MASK 0x4 -#define RTL8367C_CFG_TIMER_1588_EN_OFFSET 1 -#define RTL8367C_CFG_TIMER_1588_EN_MASK 0x2 -#define RTL8367C_CFG_CLK_SRC_OFFSET 0 -#define RTL8367C_CFG_CLK_SRC_MASK 0x1 - -#define RTL8367C_REG_OTAG_TPID 0x6405 - -#define RTL8367C_REG_ITAG_TPID 0x6406 - -#define RTL8367C_REG_MAC_ADDR_L 0x6407 - -#define RTL8367C_REG_MAC_ADDR_M 0x6408 - -#define RTL8367C_REG_MAC_ADDR_H 0x6409 - -#define RTL8367C_REG_PTP_TIME_NSEC_L_NSEC_RD 0x640a - -#define RTL8367C_REG_PTP_TIME_NSEC_H_NSEC_RD 0x640b -#define RTL8367C_PTP_TIME_NSEC_H_NSEC_RD_OFFSET 0 -#define RTL8367C_PTP_TIME_NSEC_H_NSEC_RD_MASK 0x7FF - -#define RTL8367C_REG_PTP_TIME_SEC_L_SEC_RD 0x640c - -#define RTL8367C_REG_PTP_TIME_SEC_H_SEC_RD 0x640d - -#define RTL8367C_REG_PTP_TIME_CFG2 0x640e -#define RTL8367C_CFG_EN_OFFLOAD_OFFSET 9 -#define RTL8367C_CFG_EN_OFFLOAD_MASK 0x200 -#define RTL8367C_CFG_SAVE_OFF_TS_OFFSET 8 -#define RTL8367C_CFG_SAVE_OFF_TS_MASK 0x100 -#define RTL8367C_CFG_IMR_OFFSET 0 -#define RTL8367C_CFG_IMR_MASK 0xFF - -#define RTL8367C_REG_PTP_INTERRUPT_CFG 0x640f -#define RTL8367C_P9_INTERRUPT_OFFSET 9 -#define RTL8367C_P9_INTERRUPT_MASK 0x200 -#define RTL8367C_P8_INTERRUPT_OFFSET 8 -#define RTL8367C_P8_INTERRUPT_MASK 0x100 -#define RTL8367C_P7_INTERRUPT_OFFSET 7 -#define RTL8367C_P7_INTERRUPT_MASK 0x80 -#define RTL8367C_P6_INTERRUPT_OFFSET 6 -#define RTL8367C_P6_INTERRUPT_MASK 0x40 -#define RTL8367C_P5_INTERRUPT_OFFSET 5 -#define RTL8367C_P5_INTERRUPT_MASK 0x20 -#define RTL8367C_P4_INTERRUPT_OFFSET 4 -#define RTL8367C_P4_INTERRUPT_MASK 0x10 -#define RTL8367C_P3_INTERRUPT_OFFSET 3 -#define RTL8367C_P3_INTERRUPT_MASK 0x8 -#define RTL8367C_P2_INTERRUPT_OFFSET 2 -#define RTL8367C_P2_INTERRUPT_MASK 0x4 -#define RTL8367C_P1_INTERRUPT_OFFSET 1 -#define RTL8367C_P1_INTERRUPT_MASK 0x2 -#define RTL8367C_P0_INTERRUPT_OFFSET 0 -#define RTL8367C_P0_INTERRUPT_MASK 0x1 - -#define RTL8367C_REG_P0_TX_SYNC_SEQ_ID 0x6410 - -#define RTL8367C_REG_P0_TX_DELAY_REQ_SEQ_ID 0x6411 - -#define RTL8367C_REG_P0_TX_PDELAY_REQ_SEQ_ID 0x6412 - -#define RTL8367C_REG_P0_TX_PDELAY_RESP_SEQ_ID 0x6413 - -#define RTL8367C_REG_P0_RX_SYNC_SEQ_ID 0x6414 - -#define RTL8367C_REG_P0_RX_DELAY_REQ_SEQ_ID 0x6415 - -#define RTL8367C_REG_P0_RX_PDELAY_REQ_SEQ_ID 0x6416 - -#define RTL8367C_REG_P0_RX_PDELAY_RESP_SEQ_ID 0x6417 - -#define RTL8367C_REG_P0_PORT_NSEC_15_0 0x6418 - -#define RTL8367C_REG_P0_PORT_NSEC_26_16 0x6419 -#define RTL8367C_P0_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P0_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P0_PORT_SEC_15_0 0x641a - -#define RTL8367C_REG_P0_PORT_SEC_31_16 0x641b - -#define RTL8367C_REG_P0_EAV_CFG 0x641c -#define RTL8367C_P0_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P0_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P0_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P0_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P0_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P0_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P0_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P0_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P0_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P0_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P0_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P0_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P0_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P0_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P0_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P0_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P0_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P0_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P1_TX_SYNC_SEQ_ID 0x6420 - -#define RTL8367C_REG_P1_TX_DELAY_REQ_SEQ_ID 0x6421 - -#define RTL8367C_REG_P1_TX_PDELAY_REQ_SEQ_ID 0x6422 - -#define RTL8367C_REG_P1_TX_PDELAY_RESP_SEQ_ID 0x6423 - -#define RTL8367C_REG_P1_RX_SYNC_SEQ_ID 0x6424 - -#define RTL8367C_REG_P1_RX_DELAY_REQ_SEQ_ID 0x6425 - -#define RTL8367C_REG_P1_RX_PDELAY_REQ_SEQ_ID 0x6426 - -#define RTL8367C_REG_P1_RX_PDELAY_RESP_SEQ_ID 0x6427 - -#define RTL8367C_REG_P1_PORT_NSEC_15_0 0x6428 - -#define RTL8367C_REG_P1_PORT_NSEC_26_16 0x6429 -#define RTL8367C_P1_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P1_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P1_PORT_SEC_15_0 0x642a - -#define RTL8367C_REG_P1_PORT_SEC_31_16 0x642b - -#define RTL8367C_REG_P1_EAV_CFG 0x642c -#define RTL8367C_P1_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P1_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P1_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P1_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P1_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P1_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P1_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P1_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P1_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P1_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P1_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P1_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P1_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P1_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P1_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P1_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P1_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P1_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P2_TX_SYNC_SEQ_ID 0x6430 - -#define RTL8367C_REG_P2_TX_DELAY_REQ_SEQ_ID 0x6431 - -#define RTL8367C_REG_P2_TX_PDELAY_REQ_SEQ_ID 0x6432 - -#define RTL8367C_REG_P2_TX_PDELAY_RESP_SEQ_ID 0x6433 - -#define RTL8367C_REG_P2_RX_SYNC_SEQ_ID 0x6434 - -#define RTL8367C_REG_P2_RX_DELAY_REQ_SEQ_ID 0x6435 - -#define RTL8367C_REG_P2_RX_PDELAY_REQ_SEQ_ID 0x6436 - -#define RTL8367C_REG_P2_RX_PDELAY_RESP_SEQ_ID 0x6437 - -#define RTL8367C_REG_P2_PORT_NSEC_15_0 0x6438 - -#define RTL8367C_REG_P2_PORT_NSEC_26_16 0x6439 -#define RTL8367C_P2_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P2_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P2_PORT_SEC_15_0 0x643a - -#define RTL8367C_REG_P2_PORT_SEC_31_16 0x643b - -#define RTL8367C_REG_P2_EAV_CFG 0x643c -#define RTL8367C_P2_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P2_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P2_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P2_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P2_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P2_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P2_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P2_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P2_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P2_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P2_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P2_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P2_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P2_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P2_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P2_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P2_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P2_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P3_TX_SYNC_SEQ_ID 0x6440 - -#define RTL8367C_REG_P3_TX_DELAY_REQ_SEQ_ID 0x6441 - -#define RTL8367C_REG_P3_TX_PDELAY_REQ_SEQ_ID 0x6442 - -#define RTL8367C_REG_P3_TX_PDELAY_RESP_SEQ_ID 0x6443 - -#define RTL8367C_REG_P3_RX_SYNC_SEQ_ID 0x6444 - -#define RTL8367C_REG_P3_RX_DELAY_REQ_SEQ_ID 0x6445 - -#define RTL8367C_REG_P3_RX_PDELAY_REQ_SEQ_ID 0x6446 - -#define RTL8367C_REG_P3_RX_PDELAY_RESP_SEQ_ID 0x6447 - -#define RTL8367C_REG_P3_PORT_NSEC_15_0 0x6448 - -#define RTL8367C_REG_P3_PORT_NSEC_26_16 0x6449 -#define RTL8367C_P3_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P3_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P3_PORT_SEC_15_0 0x644a - -#define RTL8367C_REG_P3_PORT_SEC_31_16 0x644b - -#define RTL8367C_REG_P3_EAV_CFG 0x644c -#define RTL8367C_P3_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P3_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P3_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P3_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P3_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P3_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P3_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P3_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P3_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P3_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P3_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P3_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P3_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P3_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P3_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P3_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P3_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P3_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P4_TX_SYNC_SEQ_ID 0x6450 - -#define RTL8367C_REG_P4_TX_DELAY_REQ_SEQ_ID 0x6451 - -#define RTL8367C_REG_P4_TX_PDELAY_REQ_SEQ_ID 0x6452 - -#define RTL8367C_REG_P4_TX_PDELAY_RESP_SEQ_ID 0x6453 - -#define RTL8367C_REG_P4_RX_SYNC_SEQ_ID 0x6454 - -#define RTL8367C_REG_P4_RX_DELAY_REQ_SEQ_ID 0x6455 - -#define RTL8367C_REG_P4_RX_PDELAY_REQ_SEQ_ID 0x6456 - -#define RTL8367C_REG_P4_RX_PDELAY_RESP_SEQ_ID 0x6457 - -#define RTL8367C_REG_P4_PORT_NSEC_15_0 0x6458 - -#define RTL8367C_REG_P4_PORT_NSEC_26_16 0x6459 -#define RTL8367C_P4_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P4_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P4_PORT_SEC_15_0 0x645a - -#define RTL8367C_REG_P4_PORT_SEC_31_16 0x645b - -#define RTL8367C_REG_P4_EAV_CFG 0x645c -#define RTL8367C_P4_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P4_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P4_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P4_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P4_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P4_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P4_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P4_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P4_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P4_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P4_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P4_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P4_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P4_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P4_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P4_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P4_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P4_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P6_TX_SYNC_SEQ_ID 0x6460 - -#define RTL8367C_REG_P6_TX_DELAY_REQ_SEQ_ID 0x6461 - -#define RTL8367C_REG_P6_TX_PDELAY_REQ_SEQ_ID 0x6462 - -#define RTL8367C_REG_P6_TX_PDELAY_RESP_SEQ_ID 0x6463 - -#define RTL8367C_REG_P6_RX_SYNC_SEQ_ID 0x6464 - -#define RTL8367C_REG_P6_RX_DELAY_REQ_SEQ_ID 0x6465 - -#define RTL8367C_REG_P6_RX_PDELAY_REQ_SEQ_ID 0x6466 - -#define RTL8367C_REG_P6_RX_PDELAY_RESP_SEQ_ID 0x6467 - -#define RTL8367C_REG_P6_PORT_NSEC_15_0 0x6468 - -#define RTL8367C_REG_P6_PORT_NSEC_26_16 0x6469 -#define RTL8367C_P6_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P6_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P6_PORT_SEC_15_0 0x646a - -#define RTL8367C_REG_P6_PORT_SEC_31_16 0x646b - -#define RTL8367C_REG_P6_EAV_CFG 0x646c -#define RTL8367C_P6_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P6_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P6_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P6_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P6_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P6_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P6_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P6_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P6_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P6_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P6_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P6_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P6_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P6_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P6_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P6_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P6_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P6_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P7_TX_SYNC_SEQ_ID 0x6470 - -#define RTL8367C_REG_P7_TX_DELAY_REQ_SEQ_ID 0x6471 - -#define RTL8367C_REG_P7_TX_PDELAY_REQ_SEQ_ID 0x6472 - -#define RTL8367C_REG_P7_TX_PDELAY_RESP_SEQ_ID 0x6473 - -#define RTL8367C_REG_P7_RX_SYNC_SEQ_ID 0x6474 - -#define RTL8367C_REG_P7_RX_DELAY_REQ_SEQ_ID 0x6475 - -#define RTL8367C_REG_P7_RX_PDELAY_REQ_SEQ_ID 0x6476 - -#define RTL8367C_REG_P7_RX_PDELAY_RESP_SEQ_ID 0x6477 - -#define RTL8367C_REG_P7_PORT_NSEC_15_0 0x6478 - -#define RTL8367C_REG_P7_PORT_NSEC_26_16 0x6479 -#define RTL8367C_P7_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P7_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P7_PORT_SEC_15_0 0x647a - -#define RTL8367C_REG_P7_PORT_SEC_31_16 0x647b - -#define RTL8367C_REG_P7_EAV_CFG 0x647c -#define RTL8367C_P7_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P7_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P7_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P7_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P7_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P7_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P7_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P7_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P7_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P7_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P7_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P7_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P7_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P7_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P7_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P7_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P7_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P7_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P5_TX_SYNC_SEQ_ID 0x6480 - -#define RTL8367C_REG_P5_TX_DELAY_REQ_SEQ_ID 0x6481 - -#define RTL8367C_REG_P5_TX_PDELAY_REQ_SEQ_ID 0x6482 - -#define RTL8367C_REG_P5_TX_PDELAY_RESP_SEQ_ID 0x6483 - -#define RTL8367C_REG_P5_RX_SYNC_SEQ_ID 0x6484 - -#define RTL8367C_REG_P5_RX_DELAY_REQ_SEQ_ID 0x6485 - -#define RTL8367C_REG_P5_RX_PDELAY_REQ_SEQ_ID 0x6486 - -#define RTL8367C_REG_P5_RX_PDELAY_RESP_SEQ_ID 0x6487 - -#define RTL8367C_REG_P5_PORT_NSEC_15_0 0x6488 - -#define RTL8367C_REG_P5_PORT_NSEC_26_16 0x6489 -#define RTL8367C_P5_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P5_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P5_PORT_SEC_15_0 0x648a - -#define RTL8367C_REG_P5_PORT_SEC_31_16 0x648b - -#define RTL8367C_REG_P5_EAV_CFG 0x648c -#define RTL8367C_P5_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P5_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P5_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P5_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P5_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P5_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P5_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P5_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P5_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P5_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P5_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P5_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P5_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P5_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P5_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P5_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P5_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P5_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P8_TX_SYNC_SEQ_ID 0x6490 - -#define RTL8367C_REG_P8_TX_DELAY_REQ_SEQ_ID 0x6491 - -#define RTL8367C_REG_P8_TX_PDELAY_REQ_SEQ_ID 0x6492 - -#define RTL8367C_REG_P8_TX_PDELAY_RESP_SEQ_ID 0x6493 - -#define RTL8367C_REG_P8_RX_SYNC_SEQ_ID 0x6494 - -#define RTL8367C_REG_P8_RX_DELAY_REQ_SEQ_ID 0x6495 - -#define RTL8367C_REG_P8_RX_PDELAY_REQ_SEQ_ID 0x6496 - -#define RTL8367C_REG_P8_RX_PDELAY_RESP_SEQ_ID 0x6497 - -#define RTL8367C_REG_P8_PORT_NSEC_15_0 0x6498 - -#define RTL8367C_REG_P8_PORT_NSEC_26_16 0x6499 -#define RTL8367C_P8_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P8_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P8_PORT_SEC_15_0 0x649a - -#define RTL8367C_REG_P8_PORT_SEC_31_16 0x649b - -#define RTL8367C_REG_P8_EAV_CFG 0x649c -#define RTL8367C_P8_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P8_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P8_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P8_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P8_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P8_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P8_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P8_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P8_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P8_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P8_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P8_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P8_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P8_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P8_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P8_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P8_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P8_EAV_CFG_TX_SYNC_MASK 0x1 - -#define RTL8367C_REG_P9_TX_SYNC_SEQ_ID 0x64a0 - -#define RTL8367C_REG_P9_TX_DELAY_REQ_SEQ_ID 0x64a1 - -#define RTL8367C_REG_P9_TX_PDELAY_REQ_SEQ_ID 0x64a2 - -#define RTL8367C_REG_P9_TX_PDELAY_RESP_SEQ_ID 0x64a3 - -#define RTL8367C_REG_P9_RX_SYNC_SEQ_ID 0x64a4 - -#define RTL8367C_REG_P9_RX_DELAY_REQ_SEQ_ID 0x64a5 - -#define RTL8367C_REG_P9_RX_PDELAY_REQ_SEQ_ID 0x64a6 - -#define RTL8367C_REG_P9_RX_PDELAY_RESP_SEQ_ID 0x64a7 - -#define RTL8367C_REG_P9_PORT_NSEC_15_0 0x64a8 - -#define RTL8367C_REG_P9_PORT_NSEC_26_16 0x64a9 -#define RTL8367C_P9_PORT_NSEC_26_16_OFFSET 0 -#define RTL8367C_P9_PORT_NSEC_26_16_MASK 0x7FF - -#define RTL8367C_REG_P9_PORT_SEC_15_0 0x64aa - -#define RTL8367C_REG_P9_PORT_SEC_31_16 0x64ab - -#define RTL8367C_REG_P9_EAV_CFG 0x64ac -#define RTL8367C_P9_EAV_CFG_PTP_PHY_EN_EN_OFFSET 8 -#define RTL8367C_P9_EAV_CFG_PTP_PHY_EN_EN_MASK 0x100 -#define RTL8367C_P9_EAV_CFG_RX_PDELAY_RESP_OFFSET 7 -#define RTL8367C_P9_EAV_CFG_RX_PDELAY_RESP_MASK 0x80 -#define RTL8367C_P9_EAV_CFG_RX_PDELAY_REQ_OFFSET 6 -#define RTL8367C_P9_EAV_CFG_RX_PDELAY_REQ_MASK 0x40 -#define RTL8367C_P9_EAV_CFG_RX_DELAY_REQ_OFFSET 5 -#define RTL8367C_P9_EAV_CFG_RX_DELAY_REQ_MASK 0x20 -#define RTL8367C_P9_EAV_CFG_RX_SYNC_OFFSET 4 -#define RTL8367C_P9_EAV_CFG_RX_SYNC_MASK 0x10 -#define RTL8367C_P9_EAV_CFG_TX_PDELAY_RESP_OFFSET 3 -#define RTL8367C_P9_EAV_CFG_TX_PDELAY_RESP_MASK 0x8 -#define RTL8367C_P9_EAV_CFG_TX_PDELAY_REQ_OFFSET 2 -#define RTL8367C_P9_EAV_CFG_TX_PDELAY_REQ_MASK 0x4 -#define RTL8367C_P9_EAV_CFG_TX_DELAY_REQ_OFFSET 1 -#define RTL8367C_P9_EAV_CFG_TX_DELAY_REQ_MASK 0x2 -#define RTL8367C_P9_EAV_CFG_TX_SYNC_OFFSET 0 -#define RTL8367C_P9_EAV_CFG_TX_SYNC_MASK 0x1 - -/* (16'h6600)sds_indacs_reg */ - -#define RTL8367C_REG_SDS_INDACS_CMD 0x6600 -#define RTL8367C_SDS_CMD_BUSY_OFFSET 8 -#define RTL8367C_SDS_CMD_BUSY_MASK 0x100 -#define RTL8367C_SDS_CMD_OFFSET 7 -#define RTL8367C_SDS_CMD_MASK 0x80 -#define RTL8367C_SDS_RWOP_OFFSET 6 -#define RTL8367C_SDS_RWOP_MASK 0x40 -#define RTL8367C_SDS_INDEX_OFFSET 0 -#define RTL8367C_SDS_INDEX_MASK 0x3F - -#define RTL8367C_REG_SDS_INDACS_ADR 0x6601 -#define RTL8367C_SDS_PAGE_OFFSET 5 -#define RTL8367C_SDS_PAGE_MASK 0x7E0 -#define RTL8367C_SDS_REGAD_OFFSET 0 -#define RTL8367C_SDS_REGAD_MASK 0x1F - -#define RTL8367C_REG_SDS_INDACS_DATA 0x6602 - - -#endif /*#ifndef _RTL8367C_REG_H_*/ - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/smi.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/smi.h deleted file mode 100644 index b77d760711..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/smi.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367C switch low-level function for access register - * Feature : SMI related functions - * - */ - -#ifndef __SMI_H__ -#define __SMI_H__ - -#include -#include "rtk_error.h" - -#define MDC_MDIO_CTRL0_REG 31 -#define MDC_MDIO_START_REG 29 -#define MDC_MDIO_CTRL1_REG 21 -#define MDC_MDIO_ADDRESS_REG 23 -#define MDC_MDIO_DATA_WRITE_REG 24 -#define MDC_MDIO_DATA_READ_REG 25 -#define MDC_MDIO_PREAMBLE_LEN 32 - -#define MDC_MDIO_START_OP 0xFFFF -#define MDC_MDIO_ADDR_OP 0x000E -#define MDC_MDIO_READ_OP 0x0001 -#define MDC_MDIO_WRITE_OP 0x0003 - -#define SPI_READ_OP 0x3 -#define SPI_WRITE_OP 0x2 -#define SPI_READ_OP_LEN 0x8 -#define SPI_WRITE_OP_LEN 0x8 -#define SPI_REG_LEN 16 -#define SPI_DATA_LEN 16 - -#define GPIO_DIR_IN 1 -#define GPIO_DIR_OUT 0 - -#define ack_timer 5 - -#define DELAY 10000 -#define CLK_DURATION(clk) { int i; for(i=0; isvid is SVID of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. - */ -extern rtk_api_ret_t rtk_svlan_memberPortEntry_set(rtk_uint32 svid_idx, rtk_svlan_memberCfg_t *psvlan_cfg); - -/* Function Name: - * rtk_svlan_memberPortEntry_get - * Description: - * Get SVLAN member Configure. - * Input: - * svid - SVLAN id - * Output: - * pSvlan_cfg - SVLAN member configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. - */ -extern rtk_api_ret_t rtk_svlan_memberPortEntry_get(rtk_uint32 svid_idx, rtk_svlan_memberCfg_t *pSvlan_cfg); - -/* Function Name: - * rtk_svlan_memberPortEntry_adv_set - * Description: - * Configure system SVLAN member by index - * Input: - * idx - Index (0 ~ 63) - * psvlan_cfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. - * Note: - * The API can set system 64 accepted s-tag frame format by index. - * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. - */ -extern rtk_api_ret_t rtk_svlan_memberPortEntry_adv_set(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg); - -/* Function Name: - * rtk_svlan_memberPortEntry_adv_get - * Description: - * Get SVLAN member Configure by index. - * Input: - * idx - Index (0 ~ 63) - * Output: - * pSvlan_cfg - SVLAN member configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. - */ -extern rtk_api_ret_t rtk_svlan_memberPortEntry_adv_get(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg); - -/* Function Name: - * rtk_svlan_defaultSvlan_set - * Description: - * Configure default egress SVLAN. - * Input: - * port - Source port - * svid - SVLAN id - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * Note: - * The API can set port n S-tag format index while receiving frame from port n - * is transmit through uplink port with s-tag field - */ -extern rtk_api_ret_t rtk_svlan_defaultSvlan_set(rtk_port_t port, rtk_vlan_t svid); - -/* Function Name: - * rtk_svlan_defaultSvlan_get - * Description: - * Get the configure default egress SVLAN. - * Input: - * port - Source port - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get port n S-tag format index while receiving frame from port n - * is transmit through uplink port with s-tag field - */ -extern rtk_api_ret_t rtk_svlan_defaultSvlan_get(rtk_port_t port, rtk_vlan_t *pSvid); - -/* Function Name: - * rtk_svlan_c2s_add - * Description: - * Configure SVLAN C2S table - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set system C2S configuration. ASIC will check upstream's VID and assign related - * SVID to mathed packet. There are 128 SVLAN C2S configurations. - */ -extern rtk_api_ret_t rtk_svlan_c2s_add(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t svid); - -/* Function Name: - * rtk_svlan_c2s_del - * Description: - * Delete one C2S entry - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete system C2S configuration. There are 128 SVLAN C2S configurations. - */ -extern rtk_api_ret_t rtk_svlan_c2s_del(rtk_vlan_t vid, rtk_port_t src_port); - -/* Function Name: - * rtk_svlan_c2s_get - * Description: - * Get configure SVLAN C2S table - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * Output: - * pSvid - SVLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get system C2S configuration. There are 128 SVLAN C2S configurations. - */ -extern rtk_api_ret_t rtk_svlan_c2s_get(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t *pSvid); - -/* Function Name: - * rtk_svlan_untag_action_set - * Description: - * Configure Action of downstream Un-Stag packet - * Input: - * action - Action for UnStag - * svid - The SVID assigned to UnStag packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of downstream Un-Stag packet. A SVID assigned - * to the un-stag is also supported by this API. The parameter of svid is - * only referenced when the action is set to UNTAG_ASSIGN - */ -extern rtk_api_ret_t rtk_svlan_untag_action_set(rtk_svlan_untag_action_t action, rtk_vlan_t svid); - -/* Function Name: - * rtk_svlan_untag_action_get - * Description: - * Get Action of downstream Un-Stag packet - * Input: - * None - * Output: - * pAction - Action for UnStag - * pSvid - The SVID assigned to UnStag packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can Get action of downstream Un-Stag packet. A SVID assigned - * to the un-stag is also retrieved by this API. The parameter pSvid is - * only refernced when the action is UNTAG_ASSIGN - */ -extern rtk_api_ret_t rtk_svlan_untag_action_get(rtk_svlan_untag_action_t *pAction, rtk_vlan_t *pSvid); - -/* Function Name: - * rtk_svlan_unmatch_action_set - * Description: - * Configure Action of downstream Unmatch packet - * Input: - * action - Action for Unmatch - * svid - The SVID assigned to Unmatch packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of downstream Un-match packet. A SVID assigned - * to the un-match is also supported by this API. The parameter od svid is - * only refernced when the action is set to UNMATCH_ASSIGN - */ -extern rtk_api_ret_t rtk_svlan_unmatch_action_set(rtk_svlan_unmatch_action_t action, rtk_vlan_t svid); - -/* Function Name: - * rtk_svlan_unmatch_action_get - * Description: - * Get Action of downstream Unmatch packet - * Input: - * None - * Output: - * pAction - Action for Unmatch - * pSvid - The SVID assigned to Unmatch packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can Get action of downstream Un-match packet. A SVID assigned - * to the un-match is also retrieved by this API. The parameter pSvid is - * only refernced when the action is UNMATCH_ASSIGN - */ -extern rtk_api_ret_t rtk_svlan_unmatch_action_get(rtk_svlan_unmatch_action_t *pAction, rtk_vlan_t *pSvid); - -/* Function Name: - * rtk_svlan_dmac_vidsel_set - * Description: - * Set DMAC CVID selection - * Input: - * port - Port - * enable - state of DMAC CVID Selection - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set DMAC CVID Selection state - */ -extern rtk_api_ret_t rtk_svlan_dmac_vidsel_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_svlan_dmac_vidsel_get - * Description: - * Get DMAC CVID selection - * Input: - * port - Port - * Output: - * pEnable - state of DMAC CVID Selection - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get DMAC CVID Selection state - */ -extern rtk_api_ret_t rtk_svlan_dmac_vidsel_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_svlan_ipmc2s_add - * Description: - * add ip multicast address to SVLAN - * Input: - * svid - SVLAN VID - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set IP mutlicast to SVID configuration. If upstream packet is IPv4 multicast - * packet and DIP is matched MC2S configuration, ASIC will assign egress SVID to the packet. - * There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -extern rtk_api_ret_t rtk_svlan_ipmc2s_add(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t svid); - -/* Function Name: - * rtk_svlan_ipmc2s_del - * Description: - * delete ip multicast address to SVLAN - * Input: - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -extern rtk_api_ret_t rtk_svlan_ipmc2s_del(ipaddr_t ipmc, ipaddr_t ipmcMsk); - -/* Function Name: - * rtk_svlan_ipmc2s_get - * Description: - * Get ip multicast address to SVLAN - * Input: - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -extern rtk_api_ret_t rtk_svlan_ipmc2s_get(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t *pSvid); - -/* Function Name: - * rtk_svlan_l2mc2s_add - * Description: - * Add L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set L2 Mutlicast to SVID configuration. If upstream packet is L2 multicast - * packet and DMAC is matched, ASIC will assign egress SVID to the packet. There are 32 - * SVLAN multicast configurations for IP and L2 multicast. - */ -extern rtk_api_ret_t rtk_svlan_l2mc2s_add(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t svid); - -/* Function Name: - * rtk_svlan_l2mc2s_del - * Description: - * delete L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete Mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -extern rtk_api_ret_t rtk_svlan_l2mc2s_del(rtk_mac_t mac, rtk_mac_t macMsk); - -/* Function Name: - * rtk_svlan_l2mc2s_get - * Description: - * Get L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get L2 mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -extern rtk_api_ret_t rtk_svlan_l2mc2s_get(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t *pSvid); - -/* Function Name: - * rtk_svlan_sp2c_add - * Description: - * Add system SP2C configuration - * Input: - * cvid - VLAN ID - * dst_port - Destination port of SVLAN to CVLAN configuration - * svid - SVLAN VID - * - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can add SVID & Destination Port to CVLAN configuration. The downstream frames with assigned - * SVID will be add C-tag with assigned CVID if the output port is the assigned destination port. - * There are 128 SP2C configurations. - */ -extern rtk_api_ret_t rtk_svlan_sp2c_add(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t cvid); - -/* Function Name: - * rtk_svlan_sp2c_get - * Description: - * Get configure system SP2C content - * Input: - * svid - SVLAN VID - * dst_port - Destination port of SVLAN to CVLAN configuration - * Output: - * pCvid - VLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * Note: - * The API can get SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. - */ -extern rtk_api_ret_t rtk_svlan_sp2c_get(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t *pCvid); - -/* Function Name: - * rtk_svlan_sp2c_del - * Description: - * Delete system SP2C configuration - * Input: - * svid - SVLAN VID - * dst_port - Destination port of SVLAN to CVLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. - */ -extern rtk_api_ret_t rtk_svlan_sp2c_del(rtk_vlan_t svid, rtk_port_t dst_port); - - -/* Function Name: - * rtk_svlan_lookupType_set - * Description: - * Set lookup type of SVLAN - * Input: - * type - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * none - */ -extern rtk_api_ret_t rtk_svlan_lookupType_set(rtk_svlan_lookupType_t type); - -/* Function Name: - * rtk_svlan_lookupType_get - * Description: - * Get lookup type of SVLAN - * Input: - * pType - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * none - */ -extern rtk_api_ret_t rtk_svlan_lookupType_get(rtk_svlan_lookupType_t *pType); - -/* Function Name: - * rtk_svlan_trapPri_set - * Description: - * Set svlan trap priority - * Input: - * priority - priority for trap packets - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_INT_PRIORITY - * Note: - * None - */ -extern rtk_api_ret_t rtk_svlan_trapPri_set(rtk_pri_t priority); - -/* Function Name: - * rtk_svlan_trapPri_get - * Description: - * Get svlan trap priority - * Input: - * None - * Output: - * pPriority - priority for trap packets - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -extern rtk_api_ret_t rtk_svlan_trapPri_get(rtk_pri_t *pPriority); - -/* Function Name: - * rtk_svlan_unassign_action_set - * Description: - * Configure Action of upstream without svid assign action - * Input: - * action - Action for Un-assign - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of upstream Un-assign svid packet. If action is not - * trap to CPU, the port-based SVID sure be assign as system need - */ -extern rtk_api_ret_t rtk_svlan_unassign_action_set(rtk_svlan_unassign_action_t action); - -/* Function Name: - * rtk_svlan_unassign_action_get - * Description: - * Get action of upstream without svid assignment - * Input: - * None - * Output: - * pAction - Action for Un-assign - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * Note: - * None - */ -extern rtk_api_ret_t rtk_svlan_unassign_action_get(rtk_svlan_unassign_action_t *pAction); - - -/* Function Name: - * rtk_svlan_checkAndCreateMbr - * Description: - * Check and create Member configuration and return index - * Input: - * vid - VLAN id. - * Output: - * pIndex - Member configuration index - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VLAN ID. - * RT_ERR_TBL_FULL - Member Configuration table full - * Note: - * - */ -extern rtk_api_ret_t rtk_svlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex); - - -#endif /* __RTK_API_SVLAN_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/trap.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/trap.h deleted file mode 100644 index 0cdb64a77b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/trap.h +++ /dev/null @@ -1,757 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes Trap module high-layer API defination - * - */ - -#ifndef __RTK_API_TRAP_H__ -#define __RTK_API_TRAP_H__ - - -typedef enum rtk_trap_type_e -{ - TRAP_BRG_GROUP = 0, - TRAP_FD_PAUSE, - TRAP_SP_MCAST, - TRAP_1X_PAE, - TRAP_UNDEF_BRG_04, - TRAP_UNDEF_BRG_05, - TRAP_UNDEF_BRG_06, - TRAP_UNDEF_BRG_07, - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - TRAP_UNDEF_BRG_09, - TRAP_UNDEF_BRG_0A, - TRAP_UNDEF_BRG_0B, - TRAP_UNDEF_BRG_0C, - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - TRAP_8021AB, - TRAP_UNDEF_BRG_0F, - TRAP_BRG_MNGEMENT, - TRAP_UNDEFINED_11, - TRAP_UNDEFINED_12, - TRAP_UNDEFINED_13, - TRAP_UNDEFINED_14, - TRAP_UNDEFINED_15, - TRAP_UNDEFINED_16, - TRAP_UNDEFINED_17, - TRAP_UNDEFINED_18, - TRAP_UNDEFINED_19, - TRAP_UNDEFINED_1A, - TRAP_UNDEFINED_1B, - TRAP_UNDEFINED_1C, - TRAP_UNDEFINED_1D, - TRAP_UNDEFINED_1E, - TRAP_UNDEFINED_1F, - TRAP_GMRP, - TRAP_GVRP, - TRAP_UNDEF_GARP_22, - TRAP_UNDEF_GARP_23, - TRAP_UNDEF_GARP_24, - TRAP_UNDEF_GARP_25, - TRAP_UNDEF_GARP_26, - TRAP_UNDEF_GARP_27, - TRAP_UNDEF_GARP_28, - TRAP_UNDEF_GARP_29, - TRAP_UNDEF_GARP_2A, - TRAP_UNDEF_GARP_2B, - TRAP_UNDEF_GARP_2C, - TRAP_UNDEF_GARP_2D, - TRAP_UNDEF_GARP_2E, - TRAP_UNDEF_GARP_2F, - TRAP_CDP, - TRAP_CSSTP, - TRAP_LLDP, - TRAP_END, -}rtk_trap_type_t; - - -typedef enum rtk_mcast_type_e -{ - MCAST_L2 = 0, - MCAST_IPV4, - MCAST_IPV6, - MCAST_END -} rtk_mcast_type_t; - -typedef enum rtk_trap_mcast_action_e -{ - MCAST_ACTION_FORWARD = 0, - MCAST_ACTION_DROP, - MCAST_ACTION_TRAP2CPU, - MCAST_ACTION_ROUTER_PORT, - MCAST_ACTION_DROP_EX_RMA, - MCAST_ACTION_END -} rtk_trap_mcast_action_t; - -typedef enum rtk_trap_rma_action_e -{ - RMA_ACTION_FORWARD = 0, - RMA_ACTION_TRAP2CPU, - RMA_ACTION_DROP, - RMA_ACTION_FORWARD_EXCLUDE_CPU, - RMA_ACTION_END -} rtk_trap_rma_action_t; - -typedef enum rtk_trap_ucast_action_e -{ - UCAST_ACTION_FORWARD_PMASK = 0, - UCAST_ACTION_DROP, - UCAST_ACTION_TRAP2CPU, - UCAST_ACTION_FLOODING, - UCAST_ACTION_END -} rtk_trap_ucast_action_t; - -typedef enum rtk_trap_ucast_type_e -{ - UCAST_UNKNOWNDA = 0, - UCAST_UNKNOWNSA, - UCAST_UNMATCHSA, - UCAST_END -} rtk_trap_ucast_type_t; - -typedef enum rtk_trap_reason_type_e -{ - TRAP_REASON_RMA = 0, - TRAP_REASON_OAM, - TRAP_REASON_1XUNAUTH, - TRAP_REASON_VLANSTACK, - TRAP_REASON_UNKNOWNMC, - TRAP_REASON_END, -} rtk_trap_reason_type_t; - - -/* Function Name: - * rtk_trap_unknownUnicastPktAction_set - * Description: - * Set unknown unicast packet action configuration. - * Input: - * port - ingress port ID for unknown unicast packet - * ucast_action - Unknown unicast action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - * - UCAST_ACTION_FLOODING - */ -rtk_api_ret_t rtk_trap_unknownUnicastPktAction_set(rtk_port_t port, rtk_trap_ucast_action_t ucast_action); - -/* Function Name: - * rtk_trap_unknownUnicastPktAction_get - * Description: - * Get unknown unicast packet action configuration. - * Input: - * port - ingress port ID for unknown unicast packet - * Output: - * pUcast_action - Unknown unicast action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * This API can get unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - * - UCAST_ACTION_FLOODING - */ -rtk_api_ret_t rtk_trap_unknownUnicastPktAction_get(rtk_port_t port, rtk_trap_ucast_action_t *pUcast_action); - -/* Function Name: - * rtk_trap_unknownMacPktAction_set - * Description: - * Set unknown source MAC packet action configuration. - * Input: - * ucast_action - Unknown source MAC action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - */ -extern rtk_api_ret_t rtk_trap_unknownMacPktAction_set(rtk_trap_ucast_action_t ucast_action); - -/* Function Name: - * rtk_trap_unknownMacPktAction_get - * Description: - * Get unknown source MAC packet action configuration. - * Input: - * None. - * Output: - * pUcast_action - Unknown source MAC action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null Pointer. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -extern rtk_api_ret_t rtk_trap_unknownMacPktAction_get(rtk_trap_ucast_action_t *pUcast_action); - -/* Function Name: - * rtk_trap_unmatchMacPktAction_set - * Description: - * Set unmatch source MAC packet action configuration. - * Input: - * ucast_action - Unknown source MAC action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - */ -extern rtk_api_ret_t rtk_trap_unmatchMacPktAction_set(rtk_trap_ucast_action_t ucast_action); - -/* Function Name: - * rtk_trap_unmatchMacPktAction_get - * Description: - * Get unmatch source MAC packet action configuration. - * Input: - * None. - * Output: - * pUcast_action - Unknown source MAC action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - */ -extern rtk_api_ret_t rtk_trap_unmatchMacPktAction_get(rtk_trap_ucast_action_t *pUcast_action); - -/* Function Name: - * rtk_trap_unmatchMacMoving_set - * Description: - * Set unmatch source MAC packet moving state. - * Input: - * port - Port ID. - * enable - ENABLED: allow SA moving, DISABLE: don't allow SA moving. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - */ -extern rtk_api_ret_t rtk_trap_unmatchMacMoving_set(rtk_port_t port, rtk_enable_t enable); - -/* Function Name: - * rtk_trap_unmatchMacMoving_get - * Description: - * Set unmatch source MAC packet moving state. - * Input: - * port - Port ID. - * Output: - * pEnable - ENABLED: allow SA moving, DISABLE: don't allow SA moving. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - */ -extern rtk_api_ret_t rtk_trap_unmatchMacMoving_get(rtk_port_t port, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_trap_unknownMcastPktAction_set - * Description: - * Set behavior of unknown multicast - * Input: - * port - Port id. - * type - unknown multicast packet type. - * mcast_action - unknown multicast action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * When receives an unknown multicast packet, switch may trap, drop or flood this packet - * (1) The unknown multicast packet type is as following: - * - MCAST_L2 - * - MCAST_IPV4 - * - MCAST_IPV6 - * (2) The unknown multicast action is as following: - * - MCAST_ACTION_FORWARD - * - MCAST_ACTION_DROP - * - MCAST_ACTION_TRAP2CPU - */ -extern rtk_api_ret_t rtk_trap_unknownMcastPktAction_set(rtk_port_t port, rtk_mcast_type_t type, rtk_trap_mcast_action_t mcast_action); - -/* Function Name: - * rtk_trap_unknownMcastPktAction_get - * Description: - * Get behavior of unknown multicast - * Input: - * type - unknown multicast packet type. - * Output: - * pMcast_action - unknown multicast action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid operation. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * When receives an unknown multicast packet, switch may trap, drop or flood this packet - * (1) The unknown multicast packet type is as following: - * - MCAST_L2 - * - MCAST_IPV4 - * - MCAST_IPV6 - * (2) The unknown multicast action is as following: - * - MCAST_ACTION_FORWARD - * - MCAST_ACTION_DROP - * - MCAST_ACTION_TRAP2CPU - */ -extern rtk_api_ret_t rtk_trap_unknownMcastPktAction_get(rtk_port_t port, rtk_mcast_type_t type, rtk_trap_mcast_action_t *pMcast_action); - -/* Function Name: - * rtk_trap_lldpEnable_set - * Description: - * Set LLDP enable. - * Input: - * enabled - LLDP enable, 0: follow RMA, 1: use LLDP action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - DMAC Assignment - * - 01:80:c2:00:00:0e ethertype = 0x88CC LLDP - * - 01:80:c2:00:00:03 ethertype = 0x88CC - * - 01:80:c2:00:00:00 ethertype = 0x88CC - - */ -extern rtk_api_ret_t rtk_trap_lldpEnable_set(rtk_enable_t enabled); - -/* Function Name: - * rtk_trap_lldpEnable_get - * Description: - * Get LLDP status. - * Input: - * None - * Output: - * pEnabled - LLDP enable, 0: follow RMA, 1: use LLDP action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * LLDP is as following definition. - * - DMAC Assignment - * - 01:80:c2:00:00:0e ethertype = 0x88CC LLDP - * - 01:80:c2:00:00:03 ethertype = 0x88CC - * - 01:80:c2:00:00:00 ethertype = 0x88CC - */ -extern rtk_api_ret_t rtk_trap_lldpEnable_get(rtk_enable_t *pEnabled); - -/* Function Name: - * rtk_trap_reasonTrapToCpuPriority_set - * Description: - * Set priority value of a packet that trapped to CPU port according to specific reason. - * Input: - * type - reason that trap to CPU port. - * priority - internal priority that is going to be set for specific trap reason. - * Output: - * None. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - Invalid input parameter - * Note: - * Currently the trap reason that supported are listed as follows: - * - TRAP_REASON_RMA - * - TRAP_REASON_OAM - * - TRAP_REASON_1XUNAUTH - * - TRAP_REASON_VLANSTACK - * - TRAP_REASON_UNKNOWNMC - */ -extern rtk_api_ret_t rtk_trap_reasonTrapToCpuPriority_set(rtk_trap_reason_type_t type, rtk_pri_t priority); - -/* Function Name: - * rtk_trap_reasonTrapToCpuPriority_get - * Description: - * Get priority value of a packet that trapped to CPU port according to specific reason. - * Input: - * type - reason that trap to CPU port. - * Output: - * pPriority - configured internal priority for such reason. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_NULL_POINTER - NULL pointer - * Note: - * Currently the trap reason that supported are listed as follows: - * - TRAP_REASON_RMA - * - TRAP_REASON_OAM - * - TRAP_REASON_1XUNAUTH - * - TRAP_REASON_VLANSTACK - * - TRAP_REASON_UNKNOWNMC - */ -extern rtk_api_ret_t rtk_trap_reasonTrapToCpuPriority_get(rtk_trap_reason_type_t type, rtk_pri_t *pPriority); - -/* Function Name: - * rtk_trap_rmaAction_set - * Description: - * Set Reserved multicast address action configuration. - * Input: - * type - rma type. - * rma_action - RMA action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid IFG parameter - * Note: - * - * There are 48 types of Reserved Multicast Address frame for application usage. - * (1)They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - * (2) The RMA action is as following: - * - RMA_ACTION_FORWARD - * - RMA_ACTION_TRAP2CPU - * - RMA_ACTION_DROP - * - RMA_ACTION_FORWARD_EXCLUDE_CPU - */ -extern rtk_api_ret_t rtk_trap_rmaAction_set(rtk_trap_type_t type, rtk_trap_rma_action_t rma_action); - -/* Function Name: - * rtk_trap_rmaAction_get - * Description: - * Get Reserved multicast address action configuration. - * Input: - * type - rma type. - * Output: - * pRma_action - RMA action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 48 types of Reserved Multicast Address frame for application usage. - * (1)They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - * (2) The RMA action is as following: - * - RMA_ACTION_FORWARD - * - RMA_ACTION_TRAP2CPU - * - RMA_ACTION_DROP - * - RMA_ACTION_FORWARD_EXCLUDE_CPU - */ -extern rtk_api_ret_t rtk_trap_rmaAction_get(rtk_trap_type_t type, rtk_trap_rma_action_t *pRma_action); - -/* Function Name: - * rtk_trap_rmaKeepFormat_set - * Description: - * Set Reserved multicast address keep format configuration. - * Input: - * type - rma type. - * enable - enable keep format. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid IFG parameter - * Note: - * - * There are 48 types of Reserved Multicast Address frame for application usage. - * They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - */ -extern rtk_api_ret_t rtk_trap_rmaKeepFormat_set(rtk_trap_type_t type, rtk_enable_t enable); - -/* Function Name: - * rtk_trap_rmaKeepFormat_get - * Description: - * Get Reserved multicast address action configuration. - * Input: - * type - rma type. - * Output: - * pEnable - keep format status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 48 types of Reserved Multicast Address frame for application usage. - * They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - */ -extern rtk_api_ret_t rtk_trap_rmaKeepFormat_get(rtk_trap_type_t type, rtk_enable_t *pEnable); - - -#endif /* __RTK_API_TRAP_H__ */ - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/trunk.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/trunk.h deleted file mode 100644 index dff61769df..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/trunk.h +++ /dev/null @@ -1,328 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes Trunk module high-layer TRUNK defination - * - */ - -#ifndef __RTK_API_TRUNK_H__ -#define __RTK_API_TRUNK_H__ - -/* - * Data Type Declaration - */ -#define RTK_TRUNK_DPORT_HASH_MASK 0x40 -#define RTK_TRUNK_SPORT_HASH_MASK 0x20 -#define RTK_TRUNK_DIP_HASH_MASK 0x10 -#define RTK_TRUNK_SIP_HASH_MASK 0x8 -#define RTK_TRUNK_DMAC_HASH_MASK 0x4 -#define RTK_TRUNK_SMAC_HASH_MASK 0x2 -#define RTK_TRUNK_SPA_HASH_MASK 0x1 - - -#define RTK_MAX_NUM_OF_TRUNK_HASH_VAL 16 - -typedef struct rtk_trunk_hashVal2Port_s -{ - rtk_uint8 value[RTK_MAX_NUM_OF_TRUNK_HASH_VAL]; -} rtk_trunk_hashVal2Port_t; - -typedef enum rtk_trunk_group_e -{ - TRUNK_GROUP0 = 0, - TRUNK_GROUP1, - TRUNK_GROUP2, - TRUNK_GROUP3, - TRUNK_GROUP_END -} rtk_trunk_group_t; - -typedef enum rtk_trunk_separateType_e -{ - SEPARATE_NONE = 0, - SEPARATE_FLOOD, - SEPARATE_END - -} rtk_trunk_separateType_t; - -typedef enum rtk_trunk_mode_e -{ - TRUNK_MODE_NORMAL = 0, - TRUNK_MODE_DUMB, - TRUNK_MODE_END -} rtk_trunk_mode_t; - -/* Function Name: - * rtk_trunk_port_set - * Description: - * Set trunking group available port mask - * Input: - * trk_gid - trunk group id - * pTrunk_member_portmask - Logic trunking member port mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * The API can set port trunking group port mask. Each port trunking group has max 4 ports. - * If enabled port mask has less than 2 ports available setting, then this trunking group function is disabled. - */ -extern rtk_api_ret_t rtk_trunk_port_set(rtk_trunk_group_t trk_gid, rtk_portmask_t *pTrunk_member_portmask); - -/* Function Name: - * rtk_trunk_port_get - * Description: - * Get trunking group available port mask - * Input: - * trk_gid - trunk group id - * Output: - * pTrunk_member_portmask - Logic trunking member port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * Note: - * The API can get 2 port trunking group. - */ -extern rtk_api_ret_t rtk_trunk_port_get(rtk_trunk_group_t trk_gid, rtk_portmask_t *pTrunk_member_portmask); - -/* Function Name: - * rtk_trunk_distributionAlgorithm_set - * Description: - * Set port trunking hash select sources - * Input: - * trk_gid - trunk group id - * algo_bitmask - Bitmask of the distribution algorithm - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * RT_ERR_LA_HASHMASK - Hash algorithm selection error. - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * The API can set port trunking hash algorithm sources. - * 7 bits mask for link aggregation group0 hash parameter selection {DIP, SIP, DMAC, SMAC, SPA} - * - 0b0000001: SPA - * - 0b0000010: SMAC - * - 0b0000100: DMAC - * - 0b0001000: SIP - * - 0b0010000: DIP - * - 0b0100000: TCP/UDP Source Port - * - 0b1000000: TCP/UDP Destination Port - * Example: - * - 0b0000011: SMAC & SPA - * - Note that it could be an arbitrary combination or independent set - */ -extern rtk_api_ret_t rtk_trunk_distributionAlgorithm_set(rtk_trunk_group_t trk_gid, rtk_uint32 algo_bitmask); - -/* Function Name: - * rtk_trunk_distributionAlgorithm_get - * Description: - * Get port trunking hash select sources - * Input: - * trk_gid - trunk group id - * Output: - * pAlgo_bitmask - Bitmask of the distribution algorithm - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * Note: - * The API can get port trunking hash algorithm sources. - */ -extern rtk_api_ret_t rtk_trunk_distributionAlgorithm_get(rtk_trunk_group_t trk_gid, rtk_uint32 *pAlgo_bitmask); - -/* Function Name: - * rtk_trunk_trafficSeparate_set - * Description: - * Set the traffic separation setting of a trunk group from the specified device. - * Input: - * trk_gid - trunk group id - * separateType - traffic separation setting - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_LA_HASHMASK - invalid hash mask - * Note: - * SEPARATE_NONE: disable traffic separation - * SEPARATE_FLOOD: trunk MSB link up port is dedicated to TX flooding (L2 lookup miss) traffic - */ -extern rtk_api_ret_t rtk_trunk_trafficSeparate_set(rtk_trunk_group_t trk_gid, rtk_trunk_separateType_t separateType); - -/* Function Name: - * rtk_trunk_trafficSeparate_get - * Description: - * Get the traffic separation setting of a trunk group from the specified device. - * Input: - * trk_gid - trunk group id - * Output: - * pSeparateType - pointer separated traffic type - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * SEPARATE_NONE: disable traffic separation - * SEPARATE_FLOOD: trunk MSB link up port is dedicated to TX flooding (L2 lookup miss) traffic - */ -extern rtk_api_ret_t rtk_trunk_trafficSeparate_get(rtk_trunk_group_t trk_gid, rtk_trunk_separateType_t *pSeparateType); - - -/* Function Name: - * rtk_trunk_mode_set - * Description: - * Set the trunk mode to the specified device. - * Input: - * mode - trunk mode - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - invalid input parameter - * Note: - * The enum of the trunk mode as following - * - TRUNK_MODE_NORMAL - * - TRUNK_MODE_DUMB - */ -extern rtk_api_ret_t rtk_trunk_mode_set(rtk_trunk_mode_t mode); - -/* Function Name: - * rtk_trunk_mode_get - * Description: - * Get the trunk mode from the specified device. - * Input: - * None - * Output: - * pMode - pointer buffer of trunk mode - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * The enum of the trunk mode as following - * - TRUNK_MODE_NORMAL - * - TRUNK_MODE_DUMB - */ -extern rtk_api_ret_t rtk_trunk_mode_get(rtk_trunk_mode_t *pMode); - -/* Function Name: - * rtk_trunk_trafficPause_set - * Description: - * Set the traffic pause setting of a trunk group. - * Input: - * trk_gid - trunk group id - * enable - traffic pause state - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * Note: - * None. - */ -extern rtk_api_ret_t rtk_trunk_trafficPause_set(rtk_trunk_group_t trk_gid, rtk_enable_t enable); - -/* Function Name: - * rtk_trunk_trafficPause_get - * Description: - * Get the traffic pause setting of a trunk group. - * Input: - * trk_gid - trunk group id - * Output: - * pEnable - pointer of traffic pause state. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None. - */ -extern rtk_api_ret_t rtk_trunk_trafficPause_get(rtk_trunk_group_t trk_gid, rtk_enable_t *pEnable); - -/* Function Name: - * rtk_trunk_hashMappingTable_set - * Description: - * Set hash value to port array in the trunk group id from the specified device. - * Input: - * trk_gid - trunk group id - * pHash2Port_array - ports associate with the hash value - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * RT_ERR_LA_TRUNK_NOT_EXIST - the trunk doesn't exist - * RT_ERR_LA_NOT_MEMBER_PORT - the port is not a member port of the trunk - * RT_ERR_LA_CPUPORT - CPU port can not be aggregated port - * Note: - * Trunk group 0 & 1 shares the same hash mapping table. - * Trunk group 2 uses a independent table. - */ -extern rtk_api_ret_t rtk_trunk_hashMappingTable_set(rtk_trunk_group_t trk_gid, rtk_trunk_hashVal2Port_t *pHash2Port_array); - -/* Function Name: - * rtk_trunk_hashMappingTable_get - * Description: - * Get hash value to port array in the trunk group id from the specified device. - * Input: - * trk_gid - trunk group id - * Output: - * pHash2Port_array - pointer buffer of ports associate with the hash value - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * Trunk group 0 & 1 shares the same hash mapping table. - * Trunk group 2 uses a independent table. - */ -extern rtk_api_ret_t rtk_trunk_hashMappingTable_get(rtk_trunk_group_t trk_gid, rtk_trunk_hashVal2Port_t *pHash2Port_array); - -/* Function Name: - * rtk_trunk_portQueueEmpty_get - * Description: - * Get the port mask which all queues are empty. - * Input: - * None. - * Output: - * pEmpty_portmask - pointer empty port mask - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None. - */ -extern rtk_api_ret_t rtk_trunk_portQueueEmpty_get(rtk_portmask_t *pEmpty_portmask); - -#endif /* __RTK_API_TRUNK_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/vlan.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/vlan.h deleted file mode 100644 index 8569fc0d40..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/vlan.h +++ /dev/null @@ -1,892 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367/RTL8367C switch high-level API - * - * Feature : The file includes Trap module high-layer VLAN defination - * - */ - -#ifndef __RTK_API_VLAN_H__ -#define __RTK_API_VLAN_H__ - - -/* - * Data Type Declaration - */ -#define RTK_MAX_NUM_OF_PROTO_TYPE 0xFFFF -#define RTK_MAX_NUM_OF_MSTI 0xF -#define RTK_FID_MAX 0xF - -typedef struct rtk_vlan_cfg_s -{ - rtk_portmask_t mbr; - rtk_portmask_t untag; - rtk_uint16 ivl_en; - rtk_uint16 fid_msti; - rtk_uint16 envlanpol; - rtk_uint16 meteridx; - rtk_uint16 vbpen; - rtk_uint16 vbpri; -}rtk_vlan_cfg_t; - -typedef struct rtk_vlan_mbrcfg_s -{ - rtk_uint16 evid; - rtk_portmask_t mbr; - rtk_uint16 fid_msti; - rtk_uint16 envlanpol; - rtk_uint16 meteridx; - rtk_uint16 vbpen; - rtk_uint16 vbpri; -}rtk_vlan_mbrcfg_t; - -typedef rtk_uint32 rtk_stp_msti_id_t; /* MSTI ID */ - -typedef enum rtk_stp_state_e -{ - STP_STATE_DISABLED = 0, - STP_STATE_BLOCKING, - STP_STATE_LEARNING, - STP_STATE_FORWARDING, - STP_STATE_END -} rtk_stp_state_t; - -typedef rtk_uint32 rtk_vlan_proto_type_t; /* protocol and port based VLAN protocol type */ - - -typedef enum rtk_vlan_acceptFrameType_e -{ - ACCEPT_FRAME_TYPE_ALL = 0, /* untagged, priority-tagged and tagged */ - ACCEPT_FRAME_TYPE_TAG_ONLY, /* tagged */ - ACCEPT_FRAME_TYPE_UNTAG_ONLY, /* untagged and priority-tagged */ - ACCEPT_FRAME_TYPE_END -} rtk_vlan_acceptFrameType_t; - - -/* frame type of protocol vlan - reference 802.1v standard */ -typedef enum rtk_vlan_protoVlan_frameType_e -{ - FRAME_TYPE_ETHERNET = 0, - FRAME_TYPE_LLCOTHER, - FRAME_TYPE_RFC1042, - FRAME_TYPE_END -} rtk_vlan_protoVlan_frameType_t; - -/* Protocol-and-port-based Vlan structure */ -typedef struct rtk_vlan_protoAndPortInfo_s -{ - rtk_uint32 proto_type; - rtk_vlan_protoVlan_frameType_t frame_type; - rtk_vlan_t cvid; - rtk_pri_t cpri; -}rtk_vlan_protoAndPortInfo_t; - -/* tagged mode of VLAN - reference realtek private specification */ -typedef enum rtk_vlan_tagMode_e -{ - VLAN_TAG_MODE_ORIGINAL = 0, - VLAN_TAG_MODE_KEEP_FORMAT, - VLAN_TAG_MODE_PRI, - VLAN_TAG_MODE_REAL_KEEP_FORMAT, - VLAN_TAG_MODE_END -} rtk_vlan_tagMode_t; - -typedef enum rtk_vlan_resVidAction_e -{ - RESVID_ACTION_UNTAG = 0, - RESVID_ACTION_TAG, - RESVID_ACTION_END -} -rtk_vlan_resVidAction_t; - -/* Function Name: - * rtk_vlan_init - * Description: - * Initialize VLAN. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * VLAN is disabled by default. User has to call this API to enable VLAN before - * using it. And It will set a default VLAN(vid 1) including all ports and set - * all ports PVID to the default VLAN. - */ -extern rtk_api_ret_t rtk_vlan_init(void); - -/* Function Name: - * rtk_vlan_set - * Description: - * Set a VLAN entry. - * Input: - * vid - VLAN ID to configure. - * pVlanCfg - VLAN Configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_L2_FID - Invalid FID. - * RT_ERR_VLAN_PORT_MBR_EXIST - Invalid member port mask. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_set(rtk_vlan_t vid, rtk_vlan_cfg_t *pVlanCfg); - -/* Function Name: - * rtk_vlan_get - * Description: - * Get a VLAN entry. - * Input: - * vid - VLAN ID to configure. - * Output: - * pVlanCfg - VLAN Configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_get(rtk_vlan_t vid, rtk_vlan_cfg_t *pVlanCfg); - -/* Function Name: - * rtk_vlan_egrFilterEnable_set - * Description: - * Set VLAN egress filter. - * Input: - * egrFilter - Egress filtering - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid input parameters. - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_egrFilterEnable_set(rtk_enable_t egrFilter); - -/* Function Name: - * rtk_vlan_egrFilterEnable_get - * Description: - * Get VLAN egress filter. - * Input: - * pEgrFilter - Egress filtering - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - NULL Pointer. - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_egrFilterEnable_get(rtk_enable_t *pEgrFilter); - -/* Function Name: - * rtk_vlan_mbrCfg_set - * Description: - * Set a VLAN Member Configuration entry by index. - * Input: - * idx - Index of VLAN Member Configuration. - * pMbrcfg - VLAN member Configuration. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * Set a VLAN Member Configuration entry by index. - */ -extern rtk_api_ret_t rtk_vlan_mbrCfg_set(rtk_uint32 idx, rtk_vlan_mbrcfg_t *pMbrcfg); - -/* Function Name: - * rtk_vlan_mbrCfg_get - * Description: - * Get a VLAN Member Configuration entry by index. - * Input: - * idx - Index of VLAN Member Configuration. - * Output: - * pMbrcfg - VLAN member Configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * Get a VLAN Member Configuration entry by index. - */ -extern rtk_api_ret_t rtk_vlan_mbrCfg_get(rtk_uint32 idx, rtk_vlan_mbrcfg_t *pMbrcfg); - -/* Function Name: - * rtk_vlan_portPvid_set - * Description: - * Set port to specified VLAN ID(PVID). - * Input: - * port - Port id. - * pvid - Specified VLAN ID. - * priority - 802.1p priority for the PVID. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_PRIORITY - Invalid priority. - * RT_ERR_VLAN_ENTRY_NOT_FOUND - VLAN entry not found. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * The API is used for Port-based VLAN. The untagged frame received from the - * port will be classified to the specified VLAN and assigned to the specified priority. - */ -extern rtk_api_ret_t rtk_vlan_portPvid_set(rtk_port_t port, rtk_vlan_t pvid, rtk_pri_t priority); - -/* Function Name: - * rtk_vlan_portPvid_get - * Description: - * Get VLAN ID(PVID) on specified port. - * Input: - * port - Port id. - * Output: - * pPvid - Specified VLAN ID. - * pPriority - 802.1p priority for the PVID. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get the PVID and 802.1p priority for the PVID of Port-based VLAN. - */ -extern rtk_api_ret_t rtk_vlan_portPvid_get(rtk_port_t port, rtk_vlan_t *pPvid, rtk_pri_t *pPriority); - -/* Function Name: - * rtk_vlan_portIgrFilterEnable_set - * Description: - * Set VLAN ingress for each port. - * Input: - * port - Port id. - * igr_filter - VLAN ingress function enable status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The status of vlan ingress filter is as following: - * - DISABLED - * - ENABLED - * While VLAN function is enabled, ASIC will decide VLAN ID for each received frame and get belonged member - * ports from VLAN table. If received port is not belonged to VLAN member ports, ASIC will drop received frame if VLAN ingress function is enabled. - */ -extern rtk_api_ret_t rtk_vlan_portIgrFilterEnable_set(rtk_port_t port, rtk_enable_t igr_filter); - -/* Function Name: - * rtk_vlan_portIgrFilterEnable_get - * Description: - * Get VLAN Ingress Filter - * Input: - * port - Port id. - * Output: - * pIgr_filter - VLAN ingress function enable status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can Get the VLAN ingress filter status. - * The status of vlan ingress filter is as following: - * - DISABLED - * - ENABLED - */ -extern rtk_api_ret_t rtk_vlan_portIgrFilterEnable_get(rtk_port_t port, rtk_enable_t *pIgr_filter); - -/* Function Name: - * rtk_vlan_portAcceptFrameType_set - * Description: - * Set VLAN accept_frame_type - * Input: - * port - Port id. - * accept_frame_type - accept frame type - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_ACCEPT_FRAME_TYPE - Invalid frame type. - * Note: - * The API is used for checking 802.1Q tagged frames. - * The accept frame type as following: - * - ACCEPT_FRAME_TYPE_ALL - * - ACCEPT_FRAME_TYPE_TAG_ONLY - * - ACCEPT_FRAME_TYPE_UNTAG_ONLY - */ -extern rtk_api_ret_t rtk_vlan_portAcceptFrameType_set(rtk_port_t port, rtk_vlan_acceptFrameType_t accept_frame_type); - -/* Function Name: - * rtk_vlan_portAcceptFrameType_get - * Description: - * Get VLAN accept_frame_type - * Input: - * port - Port id. - * Output: - * pAccept_frame_type - accept frame type - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can Get the VLAN ingress filter. - * The accept frame type as following: - * - ACCEPT_FRAME_TYPE_ALL - * - ACCEPT_FRAME_TYPE_TAG_ONLY - * - ACCEPT_FRAME_TYPE_UNTAG_ONLY - */ -extern rtk_api_ret_t rtk_vlan_portAcceptFrameType_get(rtk_port_t port, rtk_vlan_acceptFrameType_t *pAccept_frame_type); - -/* Function Name: - * rtk_vlan_tagMode_set - * Description: - * Set CVLAN egress tag mode - * Input: - * port - Port id. - * tag_mode - The egress tag mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The API can set Egress tag mode. There are 4 mode for egress tag: - * - VLAN_TAG_MODE_ORIGINAL, - * - VLAN_TAG_MODE_KEEP_FORMAT, - * - VLAN_TAG_MODE_PRI. - * - VLAN_TAG_MODE_REAL_KEEP_FORMAT, - */ -extern rtk_api_ret_t rtk_vlan_tagMode_set(rtk_port_t port, rtk_vlan_tagMode_t tag_mode); - -/* Function Name: - * rtk_vlan_tagMode_get - * Description: - * Get CVLAN egress tag mode - * Input: - * port - Port id. - * Output: - * pTag_mode - The egress tag mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get Egress tag mode. There are 4 mode for egress tag: - * - VLAN_TAG_MODE_ORIGINAL, - * - VLAN_TAG_MODE_KEEP_FORMAT, - * - VLAN_TAG_MODE_PRI. - * - VLAN_TAG_MODE_REAL_KEEP_FORMAT, - */ -extern rtk_api_ret_t rtk_vlan_tagMode_get(rtk_port_t port, rtk_vlan_tagMode_t *pTag_mode); - -/* Function Name: - * rtk_vlan_transparent_set - * Description: - * Set VLAN transparent mode - * Input: - * egr_port - Egress Port id. - * pIgr_pmask - Ingress Port Mask. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -extern rtk_api_ret_t rtk_vlan_transparent_set(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask); - -/* Function Name: - * rtk_vlan_transparent_get - * Description: - * Get VLAN transparent mode - * Input: - * egr_port - Egress Port id. - * Output: - * pIgr_pmask - Ingress Port Mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -extern rtk_api_ret_t rtk_vlan_transparent_get(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask); - -/* Function Name: - * rtk_vlan_keep_set - * Description: - * Set VLAN egress keep mode - * Input: - * egr_port - Egress Port id. - * pIgr_pmask - Ingress Port Mask. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -extern rtk_api_ret_t rtk_vlan_keep_set(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask); - -/* Function Name: - * rtk_vlan_keep_get - * Description: - * Get VLAN egress keep mode - * Input: - * egr_port - Egress Port id. - * Output: - * pIgr_pmask - Ingress Port Mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -extern rtk_api_ret_t rtk_vlan_keep_get(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask); - -/* Function Name: - * rtk_vlan_stg_set - * Description: - * Set spanning tree group instance of the vlan to the specified device - * Input: - * vid - Specified VLAN ID. - * stg - spanning tree group instance. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MSTI - Invalid msti parameter - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * The API can set spanning tree group instance of the vlan to the specified device. - */ -extern rtk_api_ret_t rtk_vlan_stg_set(rtk_vlan_t vid, rtk_stp_msti_id_t stg); - -/* Function Name: - * rtk_vlan_stg_get - * Description: - * Get spanning tree group instance of the vlan to the specified device - * Input: - * vid - Specified VLAN ID. - * Output: - * pStg - spanning tree group instance. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * The API can get spanning tree group instance of the vlan to the specified device. - */ -extern rtk_api_ret_t rtk_vlan_stg_get(rtk_vlan_t vid, rtk_stp_msti_id_t *pStg); - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_add - * Description: - * Add the protocol-and-port-based vlan to the specified port of device. - * Input: - * port - Port id. - * pInfo - Protocol and port based VLAN configuration information. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_VLAN_PRIORITY - Invalid priority. - * RT_ERR_TBL_FULL - Table is full. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * The frame type is shown in the following: - * - FRAME_TYPE_ETHERNET - * - FRAME_TYPE_RFC1042 - * - FRAME_TYPE_LLCOTHER - */ -extern rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_add(rtk_port_t port, rtk_vlan_protoAndPortInfo_t *pInfo); - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_get - * Description: - * Get the protocol-and-port-based vlan to the specified port of device. - * Input: - * port - Port id. - * proto_type - protocol-and-port-based vlan protocol type. - * frame_type - protocol-and-port-based vlan frame type. - * Output: - * pInfo - Protocol and port based VLAN configuration information. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_TBL_FULL - Table is full. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * The frame type is shown in the following: - * - FRAME_TYPE_ETHERNET - * - FRAME_TYPE_RFC1042 - * - FRAME_TYPE_LLCOTHER - */ -extern rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_get(rtk_port_t port, rtk_vlan_proto_type_t proto_type, rtk_vlan_protoVlan_frameType_t frame_type, rtk_vlan_protoAndPortInfo_t *pInfo); - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_del - * Description: - * Delete the protocol-and-port-based vlan from the specified port of device. - * Input: - * port - Port id. - * proto_type - protocol-and-port-based vlan protocol type. - * frame_type - protocol-and-port-based vlan frame type. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_TBL_FULL - Table is full. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * The frame type is shown in the following: - * - FRAME_TYPE_ETHERNET - * - FRAME_TYPE_RFC1042 - * - FRAME_TYPE_LLCOTHER - */ -extern rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_del(rtk_port_t port, rtk_vlan_proto_type_t proto_type, rtk_vlan_protoVlan_frameType_t frame_type); - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_delAll - * Description: - * Delete all protocol-and-port-based vlans from the specified port of device. - * Input: - * port - Port id. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * Delete all flow table protocol-and-port-based vlan entries. - */ -extern rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_delAll(rtk_port_t port); - -/* Function Name: - * rtk_vlan_portFid_set - * Description: - * Set port-based filtering database - * Input: - * port - Port id. - * enable - ebable port-based FID - * fid - Specified filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_FID - Invalid fid. - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can set port-based filtering database. If the function is enabled, all input - * packets will be assigned to the port-based fid regardless vlan tag. - */ -extern rtk_api_ret_t rtk_vlan_portFid_set(rtk_port_t port, rtk_enable_t enable, rtk_fid_t fid); - -/* Function Name: - * rtk_vlan_portFid_get - * Description: - * Get port-based filtering database - * Input: - * port - Port id. - * Output: - * pEnable - ebable port-based FID - * pFid - Specified filtering database. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can get port-based filtering database status. If the function is enabled, all input - * packets will be assigned to the port-based fid regardless vlan tag. - */ -extern rtk_api_ret_t rtk_vlan_portFid_get(rtk_port_t port, rtk_enable_t *pEnable, rtk_fid_t *pFid); - -/* Function Name: - * rtk_vlan_UntagDscpPriorityEnable_set - * Description: - * Set Untag DSCP priority assign - * Input: - * enable - state of Untag DSCP priority assign - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid input parameters. - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_UntagDscpPriorityEnable_set(rtk_enable_t enable); - -/* Function Name: - * rtk_vlan_UntagDscpPriorityEnable_get - * Description: - * Get Untag DSCP priority assign - * Input: - * None - * Output: - * pEnable - state of Untag DSCP priority assign - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_UntagDscpPriorityEnable_get(rtk_enable_t *pEnable); - - -/*Spanning Tree*/ -/* Function Name: - * rtk_stp_mstpState_set - * Description: - * Configure spanning tree state per each port. - * Input: - * port - Port id - * msti - Multiple spanning tree instance. - * stp_state - Spanning tree state for msti - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MSTI - Invalid msti parameter. - * RT_ERR_MSTP_STATE - Invalid STP state. - * Note: - * System supports per-port multiple spanning tree state for each msti. - * There are four states supported by ASIC. - * - STP_STATE_DISABLED - * - STP_STATE_BLOCKING - * - STP_STATE_LEARNING - * - STP_STATE_FORWARDING - */ -extern rtk_api_ret_t rtk_stp_mstpState_set(rtk_stp_msti_id_t msti, rtk_port_t port, rtk_stp_state_t stp_state); - -/* Function Name: - * rtk_stp_mstpState_get - * Description: - * Get spanning tree state per each port. - * Input: - * port - Port id. - * msti - Multiple spanning tree instance. - * Output: - * pStp_state - Spanning tree state for msti - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MSTI - Invalid msti parameter. - * Note: - * System supports per-port multiple spanning tree state for each msti. - * There are four states supported by ASIC. - * - STP_STATE_DISABLED - * - STP_STATE_BLOCKING - * - STP_STATE_LEARNING - * - STP_STATE_FORWARDING - */ -extern rtk_api_ret_t rtk_stp_mstpState_get(rtk_stp_msti_id_t msti, rtk_port_t port, rtk_stp_state_t *pStp_state); - -/* Function Name: - * rtk_vlan_checkAndCreateMbr - * Description: - * Check and create Member configuration and return index - * Input: - * vid - VLAN id. - * Output: - * pIndex - Member configuration index - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VLAN ID. - * RT_ERR_VLAN_ENTRY_NOT_FOUND - VLAN not found - * RT_ERR_TBL_FULL - Member Configuration table full - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex); - -/* Function Name: - * rtk_vlan_reservedVidAction_set - * Description: - * Set Action of VLAN ID = 0 & 4095 tagged packet - * Input: - * action_vid0 - Action for VID 0. - * action_vid4095 - Action for VID 4095. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_reservedVidAction_set(rtk_vlan_resVidAction_t action_vid0, rtk_vlan_resVidAction_t action_vid4095); - -/* Function Name: - * rtk_vlan_reservedVidAction_get - * Description: - * Get Action of VLAN ID = 0 & 4095 tagged packet - * Input: - * pAction_vid0 - Action for VID 0. - * pAction_vid4095 - Action for VID 4095. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - NULL Pointer - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_reservedVidAction_get(rtk_vlan_resVidAction_t *pAction_vid0, rtk_vlan_resVidAction_t *pAction_vid4095); - -/* Function Name: - * rtk_vlan_realKeepRemarkEnable_set - * Description: - * Set Real keep 1p remarking feature - * Input: - * enabled - State of 1p remarking at real keep packet - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_realKeepRemarkEnable_set(rtk_enable_t enabled); - -/* Function Name: - * rtk_vlan_realKeepRemarkEnable_get - * Description: - * Get Real keep 1p remarking feature - * Input: - * None. - * Output: - * pEnabled - State of 1p remarking at real keep packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -extern rtk_api_ret_t rtk_vlan_realKeepRemarkEnable_get(rtk_enable_t *pEnabled); - -/* Function Name: - * rtk_vlan_reset - * Description: - * Reset VLAN - * Input: - * None. - * Output: - * pEnabled - State of 1p remarking at real keep packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_vlan_reset(void); - -#endif /* __RTK_API_VLAN_H__ */ diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/interrupt.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/interrupt.c deleted file mode 100644 index 165ee41721..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/interrupt.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Interrupt module. - * - */ - -#include -#include -#include -#include - -#include -#include - -/* Function Name: - * rtk_int_polarity_set - * Description: - * Set interrupt polarity configuration. - * Input: - * type - Interruptpolarity type. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set interrupt polarity configuration. - */ -rtk_api_ret_t rtk_int_polarity_set(rtk_int_polarity_t type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(type >= INT_POLAR_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicInterruptPolarity(type)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_int_polarity_get - * Description: - * Get interrupt polarity configuration. - * Input: - * None - * Output: - * pType - Interruptpolarity type. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can get interrupt polarity configuration. - */ -rtk_api_ret_t rtk_int_polarity_get(rtk_int_polarity_t *pType) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pType) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicInterruptPolarity(pType)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_int_control_set - * Description: - * Set interrupt trigger status configuration. - * Input: - * type - Interrupt type. - * enable - Interrupt status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The API can set interrupt status configuration. - * The interrupt trigger status is shown in the following: - * - INT_TYPE_LINK_STATUS - * - INT_TYPE_METER_EXCEED - * - INT_TYPE_LEARN_LIMIT - * - INT_TYPE_LINK_SPEED - * - INT_TYPE_CONGEST - * - INT_TYPE_GREEN_FEATURE - * - INT_TYPE_LOOP_DETECT - * - INT_TYPE_8051, - * - INT_TYPE_CABLE_DIAG, - * - INT_TYPE_ACL, - * - INT_TYPE_SLIENT - */ -rtk_api_ret_t rtk_int_control_set(rtk_int_type_t type, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 mask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= INT_TYPE_END) - return RT_ERR_INPUT; - - if (type == INT_TYPE_RESERVED) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicInterruptMask(&mask)) != RT_ERR_OK) - return retVal; - - if (ENABLED == enable) - mask = mask | (1<value[0] & (0x0001 << INT_TYPE_RESERVED)) - return RT_ERR_INPUT; - - if(pStatusMask->value[0] >= (0x0001 << INT_TYPE_END)) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicInterruptStatus((rtk_uint32)pStatusMask->value[0]))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_int_status_get - * Description: - * Get interrupt trigger status. - * Input: - * None - * Output: - * pStatusMask - Interrupt status bit mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get interrupt trigger status when interrupt happened. - * The interrupt trigger status is shown in the following: - * - INT_TYPE_LINK_STATUS (value[0] (Bit0)) - * - INT_TYPE_METER_EXCEED (value[0] (Bit1)) - * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2)) - * - INT_TYPE_LINK_SPEED (value[0] (Bit3)) - * - INT_TYPE_CONGEST (value[0] (Bit4)) - * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5)) - * - INT_TYPE_LOOP_DETECT (value[0] (Bit6)) - * - INT_TYPE_8051 (value[0] (Bit7)) - * - INT_TYPE_CABLE_DIAG (value[0] (Bit8)) - * - INT_TYPE_ACL (value[0] (Bit9)) - * - INT_TYPE_SLIENT (value[0] (Bit11)) - * - */ -rtk_api_ret_t rtk_int_status_get(rtk_int_status_t* pStatusMask) -{ - rtk_api_ret_t retVal; - rtk_uint32 ims_mask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pStatusMask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicInterruptStatus(&ims_mask)) != RT_ERR_OK) - return retVal; - - pStatusMask->value[0] = (ims_mask & 0x00000FFF); - return RT_ERR_OK; -} - -#define ADV_NOT_SUPPORT (0xFFFF) -static rtk_api_ret_t _rtk_int_Advidx_get(rtk_int_advType_t adv_type, rtk_uint32 *pAsic_idx) -{ - rtk_uint32 asic_idx[ADV_END] = - { - INTRST_L2_LEARN, - INTRST_SPEED_CHANGE, - INTRST_SPECIAL_CONGESTION, - INTRST_PORT_LINKDOWN, - INTRST_PORT_LINKUP, - ADV_NOT_SUPPORT, - INTRST_RLDP_LOOPED, - INTRST_RLDP_RELEASED, - }; - - if(adv_type >= ADV_END) - return RT_ERR_INPUT; - - if(asic_idx[adv_type] == ADV_NOT_SUPPORT) - return RT_ERR_CHIP_NOT_SUPPORTED; - - *pAsic_idx = asic_idx[adv_type]; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_int_advanceInfo_get - * Description: - * Get interrupt advanced information. - * Input: - * adv_type - Advanced interrupt type. - * Output: - * info - Information per type. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get advanced information when interrupt happened. - * The status will be cleared after execute this API. - */ -rtk_api_ret_t rtk_int_advanceInfo_get(rtk_int_advType_t adv_type, rtk_int_info_t *pInfo) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - rtk_uint32 intAdvType; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(adv_type >= ADV_END) - return RT_ERR_INPUT; - - if(NULL == pInfo) - return RT_ERR_NULL_POINTER; - - if(adv_type != ADV_METER_EXCEED_MASK) - { - if((retVal = _rtk_int_Advidx_get(adv_type, &intAdvType)) != RT_ERR_OK) - return retVal; - } - - switch(adv_type) - { - case ADV_L2_LEARN_PORT_MASK: - /* Get physical portmask */ - if((retVal = rtl8367c_getAsicInterruptRelatedStatus(intAdvType, &data)) != RT_ERR_OK) - return retVal; - - /* Clear Advanced Info */ - if((retVal = rtl8367c_setAsicInterruptRelatedStatus(intAdvType, 0xFFFF)) != RT_ERR_OK) - return retVal; - - /* Translate to logical portmask */ - if((retVal = rtk_switch_portmask_P2L_get(data, &(pInfo->portMask))) != RT_ERR_OK) - return retVal; - - /* Get system learn */ - if((retVal = rtl8367c_getAsicInterruptRelatedStatus(INTRST_SYS_LEARN, &data)) != RT_ERR_OK) - return retVal; - - /* Clear system learn */ - if((retVal = rtl8367c_setAsicInterruptRelatedStatus(INTRST_SYS_LEARN, 0x0001)) != RT_ERR_OK) - return retVal; - - pInfo->systemLearnOver = data; - break; - case ADV_SPEED_CHANGE_PORT_MASK: - case ADV_SPECIAL_CONGESTION_PORT_MASK: - case ADV_PORT_LINKDOWN_PORT_MASK: - case ADV_PORT_LINKUP_PORT_MASK: - case ADV_RLDP_LOOPED: - case ADV_RLDP_RELEASED: - /* Get physical portmask */ - if((retVal = rtl8367c_getAsicInterruptRelatedStatus(intAdvType, &data)) != RT_ERR_OK) - return retVal; - - /* Clear Advanced Info */ - if((retVal = rtl8367c_setAsicInterruptRelatedStatus(intAdvType, 0xFFFF)) != RT_ERR_OK) - return retVal; - - /* Translate to logical portmask */ - if((retVal = rtk_switch_portmask_P2L_get(data, &(pInfo->portMask))) != RT_ERR_OK) - return retVal; - - break; - case ADV_METER_EXCEED_MASK: - /* Get Meter Mask */ - if((retVal = rtl8367c_getAsicInterruptRelatedStatus(INTRST_METER0_15, &data)) != RT_ERR_OK) - return retVal; - - /* Clear Advanced Info */ - if((retVal = rtl8367c_setAsicInterruptRelatedStatus(INTRST_METER0_15, 0xFFFF)) != RT_ERR_OK) - return retVal; - - pInfo->meterMask = data & 0xFFFF; - - /* Get Meter Mask */ - if((retVal = rtl8367c_getAsicInterruptRelatedStatus(INTRST_METER16_31, &data)) != RT_ERR_OK) - return retVal; - - /* Clear Advanced Info */ - if((retVal = rtl8367c_setAsicInterruptRelatedStatus(INTRST_METER16_31, 0xFFFF)) != RT_ERR_OK) - return retVal; - - pInfo->meterMask = pInfo->meterMask | ((data << 16) & 0xFFFF0000); - - break; - default: - return RT_ERR_INPUT; - } - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/l2.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/l2.c deleted file mode 100644 index feff0b240b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/l2.c +++ /dev/null @@ -1,2911 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in L2 module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -/* Function Name: - * rtk_l2_init - * Description: - * Initialize l2 module of the specified device. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Initialize l2 module before calling any l2 APIs. - */ -rtk_api_ret_t rtk_l2_init(void) -{ - rtk_api_ret_t retVal; - rtk_uint32 port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_setAsicLutIpMulticastLookup(DISABLED)) != RT_ERR_OK) - return retVal; - - /*Enable CAM Usage*/ - if ((retVal = rtl8367c_setAsicLutCamTbUsage(ENABLED)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutAgeTimerSpeed(6,2)) != RT_ERR_OK) - return retVal; - - RTK_SCAN_ALL_LOG_PORT(port) - { - if ((retVal = rtl8367c_setAsicLutLearnLimitNo(rtk_switch_port_L2P_get(port), rtk_switch_maxLutAddrNumber_get())) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_l2_addr_add - * Description: - * Add LUT unicast entry. - * Input: - * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT. - * pL2_data - Unicast entry parameter - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the unicast mac address already existed in LUT, it will udpate the status of the entry. - * Otherwise, it will find an empty or asic auto learned entry to write. If all the entries - * with the same hash value can't be replaced, ASIC will return a RT_ERR_L2_INDEXTBL_FULL error. - */ -rtk_api_ret_t rtk_l2_addr_add(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pMac == NULL) || (pMac->octet[0] & 0x1)) - return RT_ERR_MAC; - - if(pL2_data == NULL) - return RT_ERR_MAC; - - RTK_CHK_PORT_VALID(pL2_data->port); - - if (pL2_data->ivl >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pL2_data->cvid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if (pL2_data->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if (pL2_data->is_static>= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pL2_data->sa_block>= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pL2_data->da_block>= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pL2_data->auth>= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pL2_data->efid> RTL8367C_EFIDMAX) - return RT_ERR_INPUT; - - if (pL2_data->priority > RTL8367C_PRIMAX) - return RT_ERR_INPUT; - - if (pL2_data->sa_pri_en >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pL2_data->fwd_pri_en >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pMac->octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pL2_data->ivl; - l2Table.fid = pL2_data->fid; - l2Table.cvid_fid = pL2_data->cvid; - l2Table.efid = pL2_data->efid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal ) - { - memcpy(l2Table.mac.octet, pMac->octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pL2_data->ivl; - l2Table.cvid_fid = pL2_data->cvid; - l2Table.fid = pL2_data->fid; - l2Table.efid = pL2_data->efid; - l2Table.spa = rtk_switch_port_L2P_get(pL2_data->port); - l2Table.nosalearn = pL2_data->is_static; - l2Table.sa_block = pL2_data->sa_block; - l2Table.da_block = pL2_data->da_block; - l2Table.l3lookup = 0; - l2Table.auth = pL2_data->auth; - l2Table.age = 6; - l2Table.lut_pri = pL2_data->priority; - l2Table.sa_en = pL2_data->sa_pri_en; - l2Table.fwd_en = pL2_data->fwd_pri_en; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pL2_data->address = l2Table.address; - return RT_ERR_OK; - } - else if (RT_ERR_L2_ENTRY_NOTFOUND == retVal ) - { - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - memcpy(l2Table.mac.octet, pMac->octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pL2_data->ivl; - l2Table.cvid_fid = pL2_data->cvid; - l2Table.fid = pL2_data->fid; - l2Table.efid = pL2_data->efid; - l2Table.spa = rtk_switch_port_L2P_get(pL2_data->port); - l2Table.nosalearn = pL2_data->is_static; - l2Table.sa_block = pL2_data->sa_block; - l2Table.da_block = pL2_data->da_block; - l2Table.l3lookup = 0; - l2Table.auth = pL2_data->auth; - l2Table.age = 6; - l2Table.lut_pri = pL2_data->priority; - l2Table.sa_en = pL2_data->sa_pri_en; - l2Table.fwd_en = pL2_data->fwd_pri_en; - - if ((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pL2_data->address = l2Table.address; - - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_L2_ENTRY_NOTFOUND == retVal ) - return RT_ERR_L2_INDEXTBL_FULL; - else - return retVal; - } - else - return retVal; - -} - -/* Function Name: - * rtk_l2_addr_get - * Description: - * Get LUT unicast entry. - * Input: - * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT. - * Output: - * pL2_data - Unicast entry parameter - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the unicast mac address existed in LUT, it will return the port and fid where - * the mac is learned. Otherwise, it will return a RT_ERR_L2_ENTRY_NOTFOUND error. - */ -rtk_api_ret_t rtk_l2_addr_get(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pMac == NULL) || (pMac->octet[0] & 0x1)) - return RT_ERR_MAC; - - if (pL2_data->fid > RTL8367C_FIDMAX || pL2_data->efid > RTL8367C_EFIDMAX) - return RT_ERR_L2_FID; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - memcpy(l2Table.mac.octet, pMac->octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pL2_data->ivl; - l2Table.cvid_fid = pL2_data->cvid; - l2Table.fid = pL2_data->fid; - l2Table.efid = pL2_data->efid; - method = LUTREADMETHOD_MAC; - - if ((retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table)) != RT_ERR_OK) - return retVal; - - memcpy(pL2_data->mac.octet, pMac->octet,ETHER_ADDR_LEN); - pL2_data->port = rtk_switch_port_P2L_get(l2Table.spa); - pL2_data->fid = l2Table.fid; - pL2_data->efid = l2Table.efid; - pL2_data->ivl = l2Table.ivl_svl; - pL2_data->cvid = l2Table.cvid_fid; - pL2_data->is_static = l2Table.nosalearn; - pL2_data->auth = l2Table.auth; - pL2_data->sa_block = l2Table.sa_block; - pL2_data->da_block = l2Table.da_block; - pL2_data->priority = l2Table.lut_pri; - pL2_data->sa_pri_en = l2Table.sa_en; - pL2_data->fwd_pri_en= l2Table.fwd_en; - pL2_data->address = l2Table.address; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_addr_next_get - * Description: - * Get Next LUT unicast entry. - * Input: - * read_method - The reading method. - * port - The port number if the read_metohd is READMETHOD_NEXT_L2UCSPA - * pAddress - The Address ID - * Output: - * pL2_data - Unicast entry parameter - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next unicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all entries is LUT. - */ -rtk_api_ret_t rtk_l2_addr_next_get(rtk_l2_read_method_t read_method, rtk_port_t port, rtk_uint32 *pAddress, rtk_l2_ucastAddr_t *pL2_data) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error Checking */ - if ((pL2_data == NULL) || (pAddress == NULL)) - return RT_ERR_MAC; - - if(read_method == READMETHOD_NEXT_L2UC) - method = LUTREADMETHOD_NEXT_L2UC; - else if(read_method == READMETHOD_NEXT_L2UCSPA) - method = LUTREADMETHOD_NEXT_L2UCSPA; - else - return RT_ERR_INPUT; - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(*pAddress > RTK_MAX_LUT_ADDR_ID ) - return RT_ERR_L2_L2UNI_PARAM; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - l2Table.address = *pAddress; - - if(read_method == READMETHOD_NEXT_L2UCSPA) - l2Table.spa = rtk_switch_port_L2P_get(port); - - if ((retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table)) != RT_ERR_OK) - return retVal; - - if(l2Table.address < *pAddress) - return RT_ERR_L2_ENTRY_NOTFOUND; - - memcpy(pL2_data->mac.octet, l2Table.mac.octet, ETHER_ADDR_LEN); - pL2_data->port = rtk_switch_port_P2L_get(l2Table.spa); - pL2_data->fid = l2Table.fid; - pL2_data->efid = l2Table.efid; - pL2_data->ivl = l2Table.ivl_svl; - pL2_data->cvid = l2Table.cvid_fid; - pL2_data->is_static = l2Table.nosalearn; - pL2_data->auth = l2Table.auth; - pL2_data->sa_block = l2Table.sa_block; - pL2_data->da_block = l2Table.da_block; - pL2_data->priority = l2Table.lut_pri; - pL2_data->sa_pri_en = l2Table.sa_en; - pL2_data->fwd_pri_en= l2Table.fwd_en; - pL2_data->address = l2Table.address; - - *pAddress = l2Table.address; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_l2_addr_del - * Description: - * Delete LUT unicast entry. - * Input: - * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT. - * fid - Filtering database - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the mac has existed in the LUT, it will be deleted. Otherwise, it will return RT_ERR_L2_ENTRY_NOTFOUND. - */ -rtk_api_ret_t rtk_l2_addr_del(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pMac == NULL) || (pMac->octet[0] & 0x1)) - return RT_ERR_MAC; - - if (pL2_data->fid > RTL8367C_FIDMAX || pL2_data->efid > RTL8367C_EFIDMAX) - return RT_ERR_L2_FID; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pMac->octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pL2_data->ivl; - l2Table.cvid_fid = pL2_data->cvid; - l2Table.fid = pL2_data->fid; - l2Table.efid = pL2_data->efid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - memcpy(l2Table.mac.octet, pMac->octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pL2_data->ivl; - l2Table.cvid_fid = pL2_data->cvid; - l2Table.fid = pL2_data->fid; - l2Table.efid = pL2_data->efid; - l2Table.spa = 0; - l2Table.nosalearn = 0; - l2Table.sa_block = 0; - l2Table.da_block = 0; - l2Table.auth = 0; - l2Table.age = 0; - l2Table.lut_pri = 0; - l2Table.sa_en = 0; - l2Table.fwd_en = 0; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pL2_data->address = l2Table.address; - return RT_ERR_OK; - } - else - return retVal; -} - -/* Function Name: - * rtk_l2_mcastAddr_add - * Description: - * Add LUT multicast entry. - * Input: - * pMcastAddr - L2 multicast entry structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_VID - Invalid VID . - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the multicast mac address already existed in the LUT, it will udpate the - * port mask of the entry. Otherwise, it will find an empty or asic auto learned - * entry to write. If all the entries with the same hash value can't be replaced, - * ASIC will return a RT_ERR_L2_INDEXTBL_FULL error. - */ -rtk_api_ret_t rtk_l2_mcastAddr_add(rtk_l2_mcastAddr_t *pMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMcastAddr) - return RT_ERR_NULL_POINTER; - - /* must be L2 multicast address */ - if( (pMcastAddr->mac.octet[0] & 0x01) != 0x01) - return RT_ERR_MAC; - - RTK_CHK_PORTMASK_VALID(&pMcastAddr->portmask); - - if(pMcastAddr->ivl == 1) - { - if (pMcastAddr->vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - } - else if(pMcastAddr->ivl == 0) - { - if (pMcastAddr->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - } - else - return RT_ERR_INPUT; - - if(pMcastAddr->fwd_pri_en >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(pMcastAddr->priority > RTL8367C_PRIMAX) - return RT_ERR_INPUT; - - /* Get physical port mask */ - if ((retVal = rtk_switch_portmask_L2P_get(&pMcastAddr->portmask, &pmask)) != RT_ERR_OK) - return retVal; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pMcastAddr->mac.octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pMcastAddr->ivl; - - if(pMcastAddr->ivl) - l2Table.cvid_fid = pMcastAddr->vid; - else - l2Table.cvid_fid = pMcastAddr->fid; - - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - memcpy(l2Table.mac.octet, pMcastAddr->mac.octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pMcastAddr->ivl; - - if(pMcastAddr->ivl) - l2Table.cvid_fid = pMcastAddr->vid; - else - l2Table.cvid_fid = pMcastAddr->fid; - - l2Table.mbr = pmask; - l2Table.nosalearn = 1; - l2Table.l3lookup = 0; - l2Table.lut_pri = pMcastAddr->priority; - l2Table.fwd_en = pMcastAddr->fwd_pri_en; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pMcastAddr->address = l2Table.address; - return RT_ERR_OK; - } - else if (RT_ERR_L2_ENTRY_NOTFOUND == retVal) - { - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - memcpy(l2Table.mac.octet, pMcastAddr->mac.octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pMcastAddr->ivl; - if(pMcastAddr->ivl) - l2Table.cvid_fid = pMcastAddr->vid; - else - l2Table.cvid_fid = pMcastAddr->fid; - - l2Table.mbr = pmask; - l2Table.nosalearn = 1; - l2Table.l3lookup = 0; - l2Table.lut_pri = pMcastAddr->priority; - l2Table.fwd_en = pMcastAddr->fwd_pri_en; - if ((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pMcastAddr->address = l2Table.address; - - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_L2_ENTRY_NOTFOUND == retVal) - return RT_ERR_L2_INDEXTBL_FULL; - else - return retVal; - } - else - return retVal; - -} - -/* Function Name: - * rtk_l2_mcastAddr_get - * Description: - * Get LUT multicast entry. - * Input: - * pMcastAddr - L2 multicast entry structure - * Output: - * pMcastAddr - L2 multicast entry structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_VID - Invalid VID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the multicast mac address existed in the LUT, it will return the port where - * the mac is learned. Otherwise, it will return a RT_ERR_L2_ENTRY_NOTFOUND error. - */ -rtk_api_ret_t rtk_l2_mcastAddr_get(rtk_l2_mcastAddr_t *pMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMcastAddr) - return RT_ERR_NULL_POINTER; - - /* must be L2 multicast address */ - if( (pMcastAddr->mac.octet[0] & 0x01) != 0x01) - return RT_ERR_MAC; - - if(pMcastAddr->ivl == 1) - { - if (pMcastAddr->vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - } - else if(pMcastAddr->ivl == 0) - { - if (pMcastAddr->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - } - else - return RT_ERR_INPUT; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - memcpy(l2Table.mac.octet, pMcastAddr->mac.octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pMcastAddr->ivl; - - if(pMcastAddr->ivl) - l2Table.cvid_fid = pMcastAddr->vid; - else - l2Table.cvid_fid = pMcastAddr->fid; - - method = LUTREADMETHOD_MAC; - - if ((retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table)) != RT_ERR_OK) - return retVal; - - pMcastAddr->priority = l2Table.lut_pri; - pMcastAddr->fwd_pri_en = l2Table.fwd_en; - pMcastAddr->igmp_asic = l2Table.igmp_asic; - pMcastAddr->igmp_index = l2Table.igmpidx; - pMcastAddr->address = l2Table.address; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &pMcastAddr->portmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_mcastAddr_next_get - * Description: - * Get Next L2 Multicast entry. - * Input: - * pAddress - The Address ID - * Output: - * pMcastAddr - L2 multicast entry structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next L2 multicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all multicast entries is LUT. - */ -rtk_api_ret_t rtk_l2_mcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_mcastAddr_t *pMcastAddr) -{ - rtk_api_ret_t retVal; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error Checking */ - if ((pAddress == NULL) || (pMcastAddr == NULL)) - return RT_ERR_INPUT; - - if(*pAddress > RTK_MAX_LUT_ADDR_ID ) - return RT_ERR_L2_L2UNI_PARAM; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - l2Table.address = *pAddress; - - if ((retVal = rtl8367c_getAsicL2LookupTb(LUTREADMETHOD_NEXT_L2MC, &l2Table)) != RT_ERR_OK) - return retVal; - - if(l2Table.address < *pAddress) - return RT_ERR_L2_ENTRY_NOTFOUND; - - memcpy(pMcastAddr->mac.octet, l2Table.mac.octet, ETHER_ADDR_LEN); - pMcastAddr->ivl = l2Table.ivl_svl; - - if(pMcastAddr->ivl) - pMcastAddr->vid = l2Table.cvid_fid; - else - pMcastAddr->fid = l2Table.cvid_fid; - - pMcastAddr->priority = l2Table.lut_pri; - pMcastAddr->fwd_pri_en = l2Table.fwd_en; - pMcastAddr->igmp_asic = l2Table.igmp_asic; - pMcastAddr->igmp_index = l2Table.igmpidx; - pMcastAddr->address = l2Table.address; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &pMcastAddr->portmask)) != RT_ERR_OK) - return retVal; - - *pAddress = l2Table.address; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_mcastAddr_del - * Description: - * Delete LUT multicast entry. - * Input: - * pMcastAddr - L2 multicast entry structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_L2_FID - Invalid FID . - * RT_ERR_L2_VID - Invalid VID . - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * If the mac has existed in the LUT, it will be deleted. Otherwise, it will return RT_ERR_L2_ENTRY_NOTFOUND. - */ -rtk_api_ret_t rtk_l2_mcastAddr_del(rtk_l2_mcastAddr_t *pMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMcastAddr) - return RT_ERR_NULL_POINTER; - - /* must be L2 multicast address */ - if( (pMcastAddr->mac.octet[0] & 0x01) != 0x01) - return RT_ERR_MAC; - - if(pMcastAddr->ivl == 1) - { - if (pMcastAddr->vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - } - else if(pMcastAddr->ivl == 0) - { - if (pMcastAddr->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - } - else - return RT_ERR_INPUT; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pMcastAddr->mac.octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pMcastAddr->ivl; - - if(pMcastAddr->ivl) - l2Table.cvid_fid = pMcastAddr->vid; - else - l2Table.cvid_fid = pMcastAddr->fid; - - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - memcpy(l2Table.mac.octet, pMcastAddr->mac.octet, ETHER_ADDR_LEN); - l2Table.ivl_svl = pMcastAddr->ivl; - - if(pMcastAddr->ivl) - l2Table.cvid_fid = pMcastAddr->vid; - else - l2Table.cvid_fid = pMcastAddr->fid; - - l2Table.mbr = 0; - l2Table.nosalearn = 0; - l2Table.sa_block = 0; - l2Table.l3lookup = 0; - l2Table.lut_pri = 0; - l2Table.fwd_en = 0; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pMcastAddr->address = l2Table.address; - return RT_ERR_OK; - } - else - return retVal; -} - -/* Function Name: - * rtk_l2_ipMcastAddr_add - * Description: - * Add Lut IP multicast entry - * Input: - * pIpMcastAddr - IP Multicast entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * System supports L2 entry with IP multicast DIP/SIP to forward IP multicasting frame as user - * desired. If this function is enabled, then system will be looked up L2 IP multicast entry to - * forward IP multicast frame directly without flooding. - */ -rtk_api_ret_t rtk_l2_ipMcastAddr_add(rtk_l2_ipMcastAddr_t *pIpMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pIpMcastAddr) - return RT_ERR_NULL_POINTER; - - /* check port mask */ - RTK_CHK_PORTMASK_VALID(&pIpMcastAddr->portmask); - - if( (pIpMcastAddr->dip & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - if(pIpMcastAddr->fwd_pri_en >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pIpMcastAddr->priority > RTL8367C_PRIMAX) - return RT_ERR_INPUT; - - /* Get Physical port mask */ - if ((retVal = rtk_switch_portmask_L2P_get(&pIpMcastAddr->portmask, &pmask)) != RT_ERR_OK) - return retVal; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpMcastAddr->sip; - l2Table.dip = pIpMcastAddr->dip; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 0; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - l2Table.sip = pIpMcastAddr->sip; - l2Table.dip = pIpMcastAddr->dip; - l2Table.mbr = pmask; - l2Table.nosalearn = 1; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 0; - l2Table.lut_pri = pIpMcastAddr->priority; - l2Table.fwd_en = pIpMcastAddr->fwd_pri_en; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pIpMcastAddr->address = l2Table.address; - return RT_ERR_OK; - } - else if (RT_ERR_L2_ENTRY_NOTFOUND == retVal) - { - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpMcastAddr->sip; - l2Table.dip = pIpMcastAddr->dip; - l2Table.mbr = pmask; - l2Table.nosalearn = 1; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 0; - l2Table.lut_pri = pIpMcastAddr->priority; - l2Table.fwd_en = pIpMcastAddr->fwd_pri_en; - if ((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pIpMcastAddr->address = l2Table.address; - - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_L2_ENTRY_NOTFOUND == retVal) - return RT_ERR_L2_INDEXTBL_FULL; - else - return retVal; - - } - else - return retVal; - -} - -/* Function Name: - * rtk_l2_ipMcastAddr_get - * Description: - * Get LUT IP multicast entry. - * Input: - * pIpMcastAddr - IP Multicast entry - * Output: - * pIpMcastAddr - IP Multicast entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get Lut table of IP multicast entry. - */ -rtk_api_ret_t rtk_l2_ipMcastAddr_get(rtk_l2_ipMcastAddr_t *pIpMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pIpMcastAddr) - return RT_ERR_NULL_POINTER; - - if( (pIpMcastAddr->dip & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpMcastAddr->sip; - l2Table.dip = pIpMcastAddr->dip; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 0; - method = LUTREADMETHOD_MAC; - if ((retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table)) != RT_ERR_OK) - return retVal; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &pIpMcastAddr->portmask)) != RT_ERR_OK) - return retVal; - - pIpMcastAddr->priority = l2Table.lut_pri; - pIpMcastAddr->fwd_pri_en = l2Table.fwd_en; - pIpMcastAddr->igmp_asic = l2Table.igmp_asic; - pIpMcastAddr->igmp_index = l2Table.igmpidx; - pIpMcastAddr->address = l2Table.address; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastAddr_next_get - * Description: - * Get Next IP Multicast entry. - * Input: - * pAddress - The Address ID - * Output: - * pIpMcastAddr - IP Multicast entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next IP multicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all IP multicast entries is LUT. - */ -rtk_api_ret_t rtk_l2_ipMcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_ipMcastAddr_t *pIpMcastAddr) -{ - rtk_api_ret_t retVal; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error Checking */ - if ((pAddress == NULL) || (pIpMcastAddr == NULL) ) - return RT_ERR_INPUT; - - if(*pAddress > RTK_MAX_LUT_ADDR_ID ) - return RT_ERR_L2_L2UNI_PARAM; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - l2Table.address = *pAddress; - - do - { - if ((retVal = rtl8367c_getAsicL2LookupTb(LUTREADMETHOD_NEXT_L3MC, &l2Table)) != RT_ERR_OK) - return retVal; - - if(l2Table.address < *pAddress) - return RT_ERR_L2_ENTRY_NOTFOUND; - - }while(l2Table.l3vidlookup == 1); - - pIpMcastAddr->sip = l2Table.sip; - pIpMcastAddr->dip = l2Table.dip; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &pIpMcastAddr->portmask)) != RT_ERR_OK) - return retVal; - - pIpMcastAddr->priority = l2Table.lut_pri; - pIpMcastAddr->fwd_pri_en = l2Table.fwd_en; - pIpMcastAddr->igmp_asic = l2Table.igmp_asic; - pIpMcastAddr->igmp_index = l2Table.igmpidx; - pIpMcastAddr->address = l2Table.address; - *pAddress = l2Table.address; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastAddr_del - * Description: - * Delete a ip multicast address entry from the specified device. - * Input: - * pIpMcastAddr - IP Multicast entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can delete a IP multicast address entry from the specified device. - */ -rtk_api_ret_t rtk_l2_ipMcastAddr_del(rtk_l2_ipMcastAddr_t *pIpMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error Checking */ - if (pIpMcastAddr == NULL) - return RT_ERR_INPUT; - - if( (pIpMcastAddr->dip & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpMcastAddr->sip; - l2Table.dip = pIpMcastAddr->dip; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 0; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - l2Table.sip = pIpMcastAddr->sip; - l2Table.dip = pIpMcastAddr->dip; - l2Table.mbr = 0; - l2Table.nosalearn = 0; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 0; - l2Table.lut_pri = 0; - l2Table.fwd_en = 0; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pIpMcastAddr->address = l2Table.address; - return RT_ERR_OK; - } - else - return retVal; -} - -/* Function Name: - * rtk_l2_ipVidMcastAddr_add - * Description: - * Add Lut IP multicast+VID entry - * Input: - * pIpVidMcastAddr - IP & VID multicast Entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -rtk_api_ret_t rtk_l2_ipVidMcastAddr_add(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pIpVidMcastAddr) - return RT_ERR_NULL_POINTER; - - /* check port mask */ - RTK_CHK_PORTMASK_VALID(&pIpVidMcastAddr->portmask); - - if (pIpVidMcastAddr->vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if( (pIpVidMcastAddr->dip & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - /* Get Physical port mask */ - if ((retVal = rtk_switch_portmask_L2P_get(&pIpVidMcastAddr->portmask, &pmask)) != RT_ERR_OK) - return retVal; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpVidMcastAddr->sip; - l2Table.dip = pIpVidMcastAddr->dip; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 1; - l2Table.l3_vid = pIpVidMcastAddr->vid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - l2Table.sip = pIpVidMcastAddr->sip; - l2Table.dip = pIpVidMcastAddr->dip; - l2Table.mbr = pmask; - l2Table.nosalearn = 1; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 1; - l2Table.l3_vid = pIpVidMcastAddr->vid; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pIpVidMcastAddr->address = l2Table.address; - return RT_ERR_OK; - } - else if (RT_ERR_L2_ENTRY_NOTFOUND == retVal) - { - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpVidMcastAddr->sip; - l2Table.dip = pIpVidMcastAddr->dip; - l2Table.mbr = pmask; - l2Table.nosalearn = 1; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 1; - l2Table.l3_vid = pIpVidMcastAddr->vid; - if ((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pIpVidMcastAddr->address = l2Table.address; - - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_L2_ENTRY_NOTFOUND == retVal) - return RT_ERR_L2_INDEXTBL_FULL; - else - return retVal; - - } - else - return retVal; -} - -/* Function Name: - * rtk_l2_ipVidMcastAddr_get - * Description: - * Get LUT IP multicast+VID entry. - * Input: - * pIpVidMcastAddr - IP & VID multicast Entry - * Output: - * pIpVidMcastAddr - IP & VID multicast Entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -rtk_api_ret_t rtk_l2_ipVidMcastAddr_get(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pIpVidMcastAddr) - return RT_ERR_NULL_POINTER; - - if (pIpVidMcastAddr->vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if( (pIpVidMcastAddr->dip & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpVidMcastAddr->sip; - l2Table.dip = pIpVidMcastAddr->dip; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 1; - l2Table.l3_vid = pIpVidMcastAddr->vid; - method = LUTREADMETHOD_MAC; - if ((retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table)) != RT_ERR_OK) - return retVal; - - pIpVidMcastAddr->address = l2Table.address; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &pIpVidMcastAddr->portmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipVidMcastAddr_next_get - * Description: - * Get Next IP Multicast+VID entry. - * Input: - * pAddress - The Address ID - * Output: - * pIpVidMcastAddr - IP & VID multicast Entry - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the next IP multicast entry after the current entry pointed by pAddress. - * The address of next entry is returned by pAddress. User can use (address + 1) - * as pAddress to call this API again for dumping all IP multicast entries is LUT. - */ -rtk_api_ret_t rtk_l2_ipVidMcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr) -{ - rtk_api_ret_t retVal; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error Checking */ - if ((pAddress == NULL) || (pIpVidMcastAddr == NULL)) - return RT_ERR_INPUT; - - if(*pAddress > RTK_MAX_LUT_ADDR_ID ) - return RT_ERR_L2_L2UNI_PARAM; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - l2Table.address = *pAddress; - - do - { - if ((retVal = rtl8367c_getAsicL2LookupTb(LUTREADMETHOD_NEXT_L3MC, &l2Table)) != RT_ERR_OK) - return retVal; - - if(l2Table.address < *pAddress) - return RT_ERR_L2_ENTRY_NOTFOUND; - - }while(l2Table.l3vidlookup == 0); - - pIpVidMcastAddr->sip = l2Table.sip; - pIpVidMcastAddr->dip = l2Table.dip; - pIpVidMcastAddr->vid = l2Table.l3_vid; - pIpVidMcastAddr->address = l2Table.address; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &pIpVidMcastAddr->portmask)) != RT_ERR_OK) - return retVal; - - *pAddress = l2Table.address; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipVidMcastAddr_del - * Description: - * Delete a ip multicast+VID address entry from the specified device. - * Input: - * pIpVidMcastAddr - IP & VID multicast Entry - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -rtk_api_ret_t rtk_l2_ipVidMcastAddr_del(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pIpVidMcastAddr) - return RT_ERR_NULL_POINTER; - - if (pIpVidMcastAddr->vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if( (pIpVidMcastAddr->dip & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.sip = pIpVidMcastAddr->sip; - l2Table.dip = pIpVidMcastAddr->dip; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 1; - l2Table.l3_vid = pIpVidMcastAddr->vid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - l2Table.sip = pIpVidMcastAddr->sip; - l2Table.dip = pIpVidMcastAddr->dip; - l2Table.mbr= 0; - l2Table.nosalearn = 0; - l2Table.l3lookup = 1; - l2Table.l3vidlookup = 1; - l2Table.l3_vid = pIpVidMcastAddr->vid; - if((retVal = rtl8367c_setAsicL2LookupTb(&l2Table)) != RT_ERR_OK) - return retVal; - - pIpVidMcastAddr->address = l2Table.address; - return RT_ERR_OK; - } - else - return retVal; -} - -/* Function Name: - * rtk_l2_ucastAddr_flush - * Description: - * Flush L2 mac address by type in the specified device (both dynamic and static). - * Input: - * pConfig - flush configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * flushByVid - 1: Flush by VID, 0: Don't flush by VID - * vid - VID (0 ~ 4095) - * flushByFid - 1: Flush by FID, 0: Don't flush by FID - * fid - FID (0 ~ 15) - * flushByPort - 1: Flush by Port, 0: Don't flush by Port - * port - Port ID - * flushByMac - Not Supported - * ucastAddr - Not Supported - * flushStaticAddr - 1: Flush both Static and Dynamic entries, 0: Flush only Dynamic entries - * flushAddrOnAllPorts - 1: Flush VID-matched entries at all ports, 0: Flush VID-matched entries per port. - */ -rtk_api_ret_t rtk_l2_ucastAddr_flush(rtk_l2_flushCfg_t *pConfig) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pConfig == NULL) - return RT_ERR_NULL_POINTER; - - if(pConfig->flushByVid >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pConfig->flushByFid >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pConfig->flushByPort >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pConfig->flushByMac >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pConfig->flushStaticAddr >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pConfig->flushAddrOnAllPorts >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pConfig->vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if(pConfig->fid > RTL8367C_FIDMAX) - return RT_ERR_INPUT; - - /* check port valid */ - RTK_CHK_PORT_VALID(pConfig->port); - - if(pConfig->flushByVid == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutFlushMode(FLUSHMDOE_VID)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutFlushVid(pConfig->vid)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutFlushType((pConfig->flushStaticAddr == ENABLED) ? FLUSHTYPE_BOTH : FLUSHTYPE_DYNAMIC)) != RT_ERR_OK) - return retVal; - - if(pConfig->flushAddrOnAllPorts == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutForceFlush(RTL8367C_PORTMASK)) != RT_ERR_OK) - return retVal; - } - else if(pConfig->flushByPort == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutForceFlush(1 << rtk_switch_port_L2P_get(pConfig->port))) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - } - else if(pConfig->flushByFid == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutFlushMode(FLUSHMDOE_FID)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutFlushFid(pConfig->fid)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutFlushType((pConfig->flushStaticAddr == ENABLED) ? FLUSHTYPE_BOTH : FLUSHTYPE_DYNAMIC)) != RT_ERR_OK) - return retVal; - - if(pConfig->flushAddrOnAllPorts == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutForceFlush(RTL8367C_PORTMASK)) != RT_ERR_OK) - return retVal; - } - else if(pConfig->flushByPort == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutForceFlush(1 << rtk_switch_port_L2P_get(pConfig->port))) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - } - else if(pConfig->flushByPort == ENABLED) - { - if ((retVal = rtl8367c_setAsicLutFlushType((pConfig->flushStaticAddr == ENABLED) ? FLUSHTYPE_BOTH : FLUSHTYPE_DYNAMIC)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutFlushMode(FLUSHMDOE_PORT)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutForceFlush(1 << rtk_switch_port_L2P_get(pConfig->port))) != RT_ERR_OK) - return retVal; - } - else if(pConfig->flushByMac == ENABLED) - { - /* Should use API "rtk_l2_addr_del" to remove a specified entry*/ - return RT_ERR_CHIP_NOT_SUPPORTED; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_table_clear - * Description: - * Flush all static & dynamic entries in LUT. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -rtk_api_ret_t rtk_l2_table_clear(void) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_setAsicLutFlushAll()) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_table_clearStatus_get - * Description: - * Get table clear status - * Input: - * None - * Output: - * pStatus - Clear status, 1:Busy, 0:finish - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -rtk_api_ret_t rtk_l2_table_clearStatus_get(rtk_l2_clearStatus_t *pStatus) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pStatus) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutFlushAllStatus((rtk_uint32 *)pStatus)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_flushLinkDownPortAddrEnable_set - * Description: - * Set HW flush linkdown port mac configuration of the specified device. - * Input: - * port - Port id. - * enable - link down flush status - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The status of flush linkdown port address is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_l2_flushLinkDownPortAddrEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicLutLinkDownForceAging(enable)) != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_flushLinkDownPortAddrEnable_get - * Description: - * Get HW flush linkdown port mac configuration of the specified device. - * Input: - * port - Port id. - * Output: - * pEnable - link down flush status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The status of flush linkdown port address is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_l2_flushLinkDownPortAddrEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutLinkDownForceAging(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_agingEnable_set - * Description: - * Set L2 LUT aging status per port setting. - * Input: - * port - Port id. - * enable - Aging status - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can be used to set L2 LUT aging status per port. - */ -rtk_api_ret_t rtk_l2_agingEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(enable == 1) - enable = 0; - else - enable = 1; - - if ((retVal = rtl8367c_setAsicLutDisableAging(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_agingEnable_get - * Description: - * Get L2 LUT aging status per port setting. - * Input: - * port - Port id. - * Output: - * pEnable - Aging status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can be used to get L2 LUT aging function per port. - */ -rtk_api_ret_t rtk_l2_agingEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutDisableAging(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - if(*pEnable == 1) - *pEnable = 0; - else - *pEnable = 1; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitLearningCnt_set - * Description: - * Set per-Port auto learning limit number - * Input: - * port - Port id. - * mac_cnt - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number - * Note: - * The API can set per-port ASIC auto learning limit number from 0(disable learning) - * to 2112. - */ -rtk_api_ret_t rtk_l2_limitLearningCnt_set(rtk_port_t port, rtk_mac_cnt_t mac_cnt) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if (mac_cnt > rtk_switch_maxLutAddrNumber_get()) - return RT_ERR_LIMITED_L2ENTRY_NUM; - - if ((retVal = rtl8367c_setAsicLutLearnLimitNo(rtk_switch_port_L2P_get(port), mac_cnt)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitLearningCnt_get - * Description: - * Get per-Port auto learning limit number - * Input: - * port - Port id. - * Output: - * pMac_cnt - Auto learning entries limit number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get per-port ASIC auto learning limit number. - */ -rtk_api_ret_t rtk_l2_limitLearningCnt_get(rtk_port_t port, rtk_mac_cnt_t *pMac_cnt) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pMac_cnt) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutLearnLimitNo(rtk_switch_port_L2P_get(port), pMac_cnt)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitSystemLearningCnt_set - * Description: - * Set System auto learning limit number - * Input: - * mac_cnt - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number - * Note: - * The API can set system ASIC auto learning limit number from 0(disable learning) - * to 2112. - */ -rtk_api_ret_t rtk_l2_limitSystemLearningCnt_set(rtk_mac_cnt_t mac_cnt) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (mac_cnt > rtk_switch_maxLutAddrNumber_get()) - return RT_ERR_LIMITED_L2ENTRY_NUM; - - if ((retVal = rtl8367c_setAsicSystemLutLearnLimitNo(mac_cnt)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitSystemLearningCnt_get - * Description: - * Get System auto learning limit number - * Input: - * None - * Output: - * pMac_cnt - Auto learning entries limit number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get system ASIC auto learning limit number. - */ -rtk_api_ret_t rtk_l2_limitSystemLearningCnt_get(rtk_mac_cnt_t *pMac_cnt) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMac_cnt) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSystemLutLearnLimitNo(pMac_cnt)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitLearningCntAction_set - * Description: - * Configure auto learn over limit number action. - * Input: - * port - Port id. - * action - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid learn over action - * Note: - * The API can set SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -rtk_api_ret_t rtk_l2_limitLearningCntAction_set(rtk_port_t port, rtk_l2_limitLearnCntAction_t action) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if ( LIMIT_LEARN_CNT_ACTION_DROP == action ) - data = 1; - else if ( LIMIT_LEARN_CNT_ACTION_FORWARD == action ) - data = 0; - else if ( LIMIT_LEARN_CNT_ACTION_TO_CPU == action ) - data = 2; - else - return RT_ERR_NOT_ALLOWED; - - if ((retVal = rtl8367c_setAsicLutLearnOverAct(data)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitLearningCntAction_get - * Description: - * Get auto learn over limit number action. - * Input: - * port - Port id. - * Output: - * pAction - Learn over action - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -rtk_api_ret_t rtk_l2_limitLearningCntAction_get(rtk_port_t port, rtk_l2_limitLearnCntAction_t *pAction) -{ - rtk_api_ret_t retVal; - rtk_uint32 action; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutLearnOverAct(&action)) != RT_ERR_OK) - return retVal; - - if ( 1 == action ) - *pAction = LIMIT_LEARN_CNT_ACTION_DROP; - else if ( 0 == action ) - *pAction = LIMIT_LEARN_CNT_ACTION_FORWARD; - else if ( 2 == action ) - *pAction = LIMIT_LEARN_CNT_ACTION_TO_CPU; - else - *pAction = action; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitSystemLearningCntAction_set - * Description: - * Configure system auto learn over limit number action. - * Input: - * port - Port id. - * action - Auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid learn over action - * Note: - * The API can set SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -rtk_api_ret_t rtk_l2_limitSystemLearningCntAction_set(rtk_l2_limitLearnCntAction_t action) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ( LIMIT_LEARN_CNT_ACTION_DROP == action ) - data = 1; - else if ( LIMIT_LEARN_CNT_ACTION_FORWARD == action ) - data = 0; - else if ( LIMIT_LEARN_CNT_ACTION_TO_CPU == action ) - data = 2; - else - return RT_ERR_NOT_ALLOWED; - - if ((retVal = rtl8367c_setAsicSystemLutLearnOverAct(data)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitSystemLearningCntAction_get - * Description: - * Get system auto learn over limit number action. - * Input: - * None. - * Output: - * pAction - Learn over action - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get SA unknown packet action while auto learn limit number is over - * The action symbol as following: - * - LIMIT_LEARN_CNT_ACTION_DROP, - * - LIMIT_LEARN_CNT_ACTION_FORWARD, - * - LIMIT_LEARN_CNT_ACTION_TO_CPU, - */ -rtk_api_ret_t rtk_l2_limitSystemLearningCntAction_get(rtk_l2_limitLearnCntAction_t *pAction) -{ - rtk_api_ret_t retVal; - rtk_uint32 action; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSystemLutLearnOverAct(&action)) != RT_ERR_OK) - return retVal; - - if ( 1 == action ) - *pAction = LIMIT_LEARN_CNT_ACTION_DROP; - else if ( 0 == action ) - *pAction = LIMIT_LEARN_CNT_ACTION_FORWARD; - else if ( 2 == action ) - *pAction = LIMIT_LEARN_CNT_ACTION_TO_CPU; - else - *pAction = action; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitSystemLearningCntPortMask_set - * Description: - * Configure system auto learn portmask - * Input: - * pPortmask - Port Mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * - */ -rtk_api_ret_t rtk_l2_limitSystemLearningCntPortMask_set(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - /* Check port mask */ - RTK_CHK_PORTMASK_VALID(pPortmask); - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicSystemLutLearnPortMask(pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_limitSystemLearningCntPortMask_get - * Description: - * get system auto learn portmask - * Input: - * None - * Output: - * pPortmask - Port Mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer. - * Note: - * - */ -rtk_api_ret_t rtk_l2_limitSystemLearningCntPortMask_get(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSystemLutLearnPortMask(&pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_learningCnt_get - * Description: - * Get per-Port current auto learning number - * Input: - * port - Port id. - * Output: - * pMac_cnt - ASIC auto learning entries number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get per-port ASIC auto learning number - */ -rtk_api_ret_t rtk_l2_learningCnt_get(rtk_port_t port, rtk_mac_cnt_t *pMac_cnt) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pMac_cnt) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutLearnNo(rtk_switch_port_L2P_get(port), pMac_cnt)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_floodPortMask_set - * Description: - * Set flooding portmask - * Input: - * type - flooding type. - * pFlood_portmask - flooding porkmask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set the flooding mask. - * The flooding type is as following: - * - FLOOD_UNKNOWNDA - * - FLOOD_UNKNOWNMC - * - FLOOD_BC - */ -rtk_api_ret_t rtk_l2_floodPortMask_set(rtk_l2_flood_type_t floood_type, rtk_portmask_t *pFlood_portmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (floood_type >= FLOOD_END) - return RT_ERR_INPUT; - - /* check port valid */ - RTK_CHK_PORTMASK_VALID(pFlood_portmask); - - /* Get Physical port mask */ - if ((retVal = rtk_switch_portmask_L2P_get(pFlood_portmask, &pmask))!=RT_ERR_OK) - return retVal; - - switch (floood_type) - { - case FLOOD_UNKNOWNDA: - if ((retVal = rtl8367c_setAsicPortUnknownDaFloodingPortmask(pmask)) != RT_ERR_OK) - return retVal; - break; - case FLOOD_UNKNOWNMC: - if ((retVal = rtl8367c_setAsicPortUnknownMulticastFloodingPortmask(pmask)) != RT_ERR_OK) - return retVal; - break; - case FLOOD_BC: - if ((retVal = rtl8367c_setAsicPortBcastFloodingPortmask(pmask)) != RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtk_l2_floodPortMask_get - * Description: - * Get flooding portmask - * Input: - * type - flooding type. - * Output: - * pFlood_portmask - flooding porkmask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get the flooding mask. - * The flooding type is as following: - * - FLOOD_UNKNOWNDA - * - FLOOD_UNKNOWNMC - * - FLOOD_BC - */ -rtk_api_ret_t rtk_l2_floodPortMask_get(rtk_l2_flood_type_t floood_type, rtk_portmask_t *pFlood_portmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (floood_type >= FLOOD_END) - return RT_ERR_INPUT; - - if(NULL == pFlood_portmask) - return RT_ERR_NULL_POINTER; - - switch (floood_type) - { - case FLOOD_UNKNOWNDA: - if ((retVal = rtl8367c_getAsicPortUnknownDaFloodingPortmask(&pmask)) != RT_ERR_OK) - return retVal; - break; - case FLOOD_UNKNOWNMC: - if ((retVal = rtl8367c_getAsicPortUnknownMulticastFloodingPortmask(&pmask)) != RT_ERR_OK) - return retVal; - break; - case FLOOD_BC: - if ((retVal = rtl8367c_getAsicPortBcastFloodingPortmask(&pmask)) != RT_ERR_OK) - return retVal; - break; - default: - break; - } - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pFlood_portmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_localPktPermit_set - * Description: - * Set permittion of frames if source port and destination port are the same. - * Input: - * port - Port id. - * permit - permittion status - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid permit value. - * Note: - * This API is setted to permit frame if its source port is equal to destination port. - */ -rtk_api_ret_t rtk_l2_localPktPermit_set(rtk_port_t port, rtk_enable_t permit) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if (permit >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortBlockSpa(rtk_switch_port_L2P_get(port), permit)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_localPktPermit_get - * Description: - * Get permittion of frames if source port and destination port are the same. - * Input: - * port - Port id. - * Output: - * pPermit - permittion status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API is to get permittion status for frames if its source port is equal to destination port. - */ -rtk_api_ret_t rtk_l2_localPktPermit_get(rtk_port_t port, rtk_enable_t *pPermit) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pPermit) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortBlockSpa(rtk_switch_port_L2P_get(port), pPermit)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_aging_set - * Description: - * Set LUT agging out speed - * Input: - * aging_time - Agging out time. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can set LUT agging out period for each entry and the range is from 45s to 458s. - */ -rtk_api_ret_t rtk_l2_aging_set(rtk_l2_age_time_t aging_time) -{ - rtk_uint32 i; - CONST_T rtk_uint32 agePara[10][3] = { - {45, 0, 1}, {88, 0, 2}, {133, 0, 3}, {177, 0, 4}, {221, 0, 5}, {266, 0, 6}, {310, 0, 7}, - {354, 2, 6}, {413, 2, 7}, {458, 3, 7}}; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (aging_time>agePara[9][0]) - return RT_ERR_OUT_OF_RANGE; - - for (i = 0; i<10; i++) - { - if (aging_time<=agePara[i][0]) - { - return rtl8367c_setAsicLutAgeTimerSpeed(agePara[i][2], agePara[i][1]); - } - } - - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_l2_aging_get - * Description: - * Get LUT agging out time - * Input: - * None - * Output: - * pEnable - Aging status - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get LUT agging out period for each entry. - */ -rtk_api_ret_t rtk_l2_aging_get(rtk_l2_age_time_t *pAging_time) -{ - rtk_api_ret_t retVal; - rtk_uint32 i,time, speed; - CONST_T rtk_uint32 agePara[10][3] = { - {45, 0, 1}, {88, 0, 2}, {133, 0, 3}, {177, 0, 4}, {221, 0, 5}, {266, 0, 6}, {310, 0, 7}, - {354, 2, 6}, {413, 2, 7}, {458, 3, 7}}; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAging_time) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLutAgeTimerSpeed(&time, &speed)) != RT_ERR_OK) - return retVal; - - for (i = 0; i<10; i++) - { - if (time==agePara[i][2]&&speed==agePara[i][1]) - { - *pAging_time = agePara[i][0]; - return RT_ERR_OK; - } - } - - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_l2_ipMcastAddrLookup_set - * Description: - * Set Lut IP multicast lookup function - * Input: - * type - Lookup type for IPMC packet. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * LOOKUP_MAC - Lookup by MAC address - * LOOKUP_IP - Lookup by IP address - * LOOKUP_IP_VID - Lookup by IP address & VLAN ID - */ -rtk_api_ret_t rtk_l2_ipMcastAddrLookup_set(rtk_l2_ipmc_lookup_type_t type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(type == LOOKUP_MAC) - { - if((retVal = rtl8367c_setAsicLutIpMulticastLookup(DISABLED)) != RT_ERR_OK) - return retVal; - } - else if(type == LOOKUP_IP) - { - if((retVal = rtl8367c_setAsicLutIpMulticastLookup(ENABLED)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutIpMulticastVidLookup(DISABLED))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutIpLookupMethod(1))!=RT_ERR_OK) - return retVal; - } - else if(type == LOOKUP_IP_VID) - { - if((retVal = rtl8367c_setAsicLutIpMulticastLookup(ENABLED)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutIpMulticastVidLookup(ENABLED))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLutIpLookupMethod(1))!=RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastAddrLookup_get - * Description: - * Get Lut IP multicast lookup function - * Input: - * None. - * Output: - * pType - Lookup type for IPMC packet. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -rtk_api_ret_t rtk_l2_ipMcastAddrLookup_get(rtk_l2_ipmc_lookup_type_t *pType) -{ - rtk_api_ret_t retVal; - rtk_uint32 enabled, vid_lookup; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pType) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicLutIpMulticastLookup(&enabled)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicLutIpMulticastVidLookup(&vid_lookup))!=RT_ERR_OK) - return retVal; - - if(enabled == ENABLED) - { - if(vid_lookup == ENABLED) - *pType = LOOKUP_IP_VID; - else - *pType = LOOKUP_IP; - } - else - *pType = LOOKUP_MAC; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastForwardRouterPort_set - * Description: - * Set IPMC packet forward to rounter port also or not - * Input: - * enabled - 1: Inlcude router port, 0, exclude router port - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -rtk_api_ret_t rtk_l2_ipMcastForwardRouterPort_set(rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enabled >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if((retVal = rtl8367c_setAsicLutIpmcFwdRouterPort(enabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastForwardRouterPort_get - * Description: - * Get IPMC packet forward to rounter port also or not - * Input: - * None. - * Output: - * pEnabled - 1: Inlcude router port, 0, exclude router port - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_l2_ipMcastForwardRouterPort_get(rtk_enable_t *pEnabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicLutIpmcFwdRouterPort(pEnabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastGroupEntry_add - * Description: - * Add an IP Multicast entry to group table - * Input: - * ip_addr - IP address - * vid - VLAN ID - * pPortmask - portmask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_TBL_FULL - Table Full - * Note: - * Add an entry to IP Multicast Group table. - */ -rtk_api_ret_t rtk_l2_ipMcastGroupEntry_add(ipaddr_t ip_addr, rtk_uint32 vid, rtk_portmask_t *pPortmask) -{ - rtk_uint32 empty_idx = 0xFFFF; - rtk_int32 index; - ipaddr_t group_addr; - rtk_uint32 group_vid; - rtk_uint32 pmask; - rtk_uint32 valid; - rtk_uint32 physicalPortmask; - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - if((ip_addr & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - /* Get Physical port mask */ - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &physicalPortmask))!=RT_ERR_OK) - return retVal; - - for(index = 0; index <= RTL8367C_LUT_IPMCGRP_TABLE_MAX; index++) - { - if ((retVal = rtl8367c_getAsicLutIPMCGroup((rtk_uint32)index, &group_addr, &group_vid, &pmask, &valid))!=RT_ERR_OK) - return retVal; - - if( (valid == ENABLED) && (group_addr == ip_addr) && (group_vid == vid) ) - { - if(pmask != physicalPortmask) - { - pmask = physicalPortmask; - if ((retVal = rtl8367c_setAsicLutIPMCGroup(index, ip_addr, vid, pmask, valid))!=RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; - } - - if( (valid == DISABLED) && (empty_idx == 0xFFFF) ) /* Unused */ - empty_idx = (rtk_uint32)index; - } - - if(empty_idx == 0xFFFF) - return RT_ERR_TBL_FULL; - - pmask = physicalPortmask; - if ((retVal = rtl8367c_setAsicLutIPMCGroup(empty_idx, ip_addr, vid, pmask, ENABLED))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_l2_ipMcastGroupEntry_del - * Description: - * Delete an entry from IP Multicast group table - * Input: - * ip_addr - IP address - * vid - VLAN ID - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_TBL_FULL - Table Full - * Note: - * Delete an entry from IP Multicast group table. - */ -rtk_api_ret_t rtk_l2_ipMcastGroupEntry_del(ipaddr_t ip_addr, rtk_uint32 vid) -{ - rtk_int32 index; - ipaddr_t group_addr; - rtk_uint32 group_vid; - rtk_uint32 pmask; - rtk_uint32 valid; - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if((ip_addr & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - for(index = 0; index <= RTL8367C_LUT_IPMCGRP_TABLE_MAX; index++) - { - if ((retVal = rtl8367c_getAsicLutIPMCGroup((rtk_uint32)index, &group_addr, &group_vid, &pmask, &valid))!=RT_ERR_OK) - return retVal; - - if( (valid == ENABLED) && (group_addr == ip_addr) && (group_vid == vid) ) - { - group_addr = 0xE0000000; - group_vid = 0; - pmask = 0; - if ((retVal = rtl8367c_setAsicLutIPMCGroup(index, group_addr, group_vid, pmask, DISABLED))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_l2_ipMcastGroupEntry_get - * Description: - * get an entry from IP Multicast group table - * Input: - * ip_addr - IP address - * vid - VLAN ID - * Output: - * pPortmask - member port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_TBL_FULL - Table Full - * Note: - * Delete an entry from IP Multicast group table. - */ -rtk_api_ret_t rtk_l2_ipMcastGroupEntry_get(ipaddr_t ip_addr, rtk_uint32 vid, rtk_portmask_t *pPortmask) -{ - rtk_int32 index; - ipaddr_t group_addr; - rtk_uint32 group_vid; - rtk_uint32 valid; - rtk_uint32 pmask; - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if((ip_addr & 0xF0000000) != 0xE0000000) - return RT_ERR_INPUT; - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_L2_VID; - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - for(index = 0; index <= RTL8367C_LUT_IPMCGRP_TABLE_MAX; index++) - { - if ((retVal = rtl8367c_getAsicLutIPMCGroup((rtk_uint32)index, &group_addr, &group_vid, &pmask, &valid))!=RT_ERR_OK) - return retVal; - - if( (valid == ENABLED) && (group_addr == ip_addr) && (group_vid == vid) ) - { - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_l2_entry_get - * Description: - * Get LUT unicast entry. - * Input: - * pL2_entry - Index field in the structure. - * Output: - * pL2_entry - other fields such as MAC, port, age... - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_EMPTY_ENTRY - Empty LUT entry. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API is used to get address by index from 0~2111. - */ -rtk_api_ret_t rtk_l2_entry_get(rtk_l2_addr_table_t *pL2_entry) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (pL2_entry->index >= rtk_switch_maxLutAddrNumber_get()) - return RT_ERR_INPUT; - - memset(&l2Table, 0x00, sizeof(rtl8367c_luttb)); - l2Table.address= pL2_entry->index; - method = LUTREADMETHOD_ADDRESS; - if ((retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table)) != RT_ERR_OK) - return retVal; - - if ((pL2_entry->index>0x800)&&(l2Table.lookup_hit==0)) - return RT_ERR_L2_EMPTY_ENTRY; - - if(l2Table.l3lookup) - { - if(l2Table.l3vidlookup) - { - memset(&pL2_entry->mac, 0, sizeof(rtk_mac_t)); - pL2_entry->is_ipmul = l2Table.l3lookup; - pL2_entry->sip = l2Table.sip; - pL2_entry->dip = l2Table.dip; - pL2_entry->is_static = l2Table.nosalearn; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &(pL2_entry->portmask)))!=RT_ERR_OK) - return retVal; - - pL2_entry->fid = 0; - pL2_entry->age = 0; - pL2_entry->auth = 0; - pL2_entry->sa_block = 0; - pL2_entry->is_ipvidmul = 1; - pL2_entry->l3_vid = l2Table.l3_vid; - } - else - { - memset(&pL2_entry->mac, 0, sizeof(rtk_mac_t)); - pL2_entry->is_ipmul = l2Table.l3lookup; - pL2_entry->sip = l2Table.sip; - pL2_entry->dip = l2Table.dip; - pL2_entry->is_static = l2Table.nosalearn; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &(pL2_entry->portmask)))!=RT_ERR_OK) - return retVal; - - pL2_entry->fid = 0; - pL2_entry->age = 0; - pL2_entry->auth = 0; - pL2_entry->sa_block = 0; - pL2_entry->is_ipvidmul = 0; - pL2_entry->l3_vid = 0; - } - } - else if(l2Table.mac.octet[0]&0x01) - { - memset(&pL2_entry->sip, 0, sizeof(ipaddr_t)); - memset(&pL2_entry->dip, 0, sizeof(ipaddr_t)); - pL2_entry->mac.octet[0] = l2Table.mac.octet[0]; - pL2_entry->mac.octet[1] = l2Table.mac.octet[1]; - pL2_entry->mac.octet[2] = l2Table.mac.octet[2]; - pL2_entry->mac.octet[3] = l2Table.mac.octet[3]; - pL2_entry->mac.octet[4] = l2Table.mac.octet[4]; - pL2_entry->mac.octet[5] = l2Table.mac.octet[5]; - pL2_entry->is_ipmul = l2Table.l3lookup; - pL2_entry->is_static = l2Table.nosalearn; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(l2Table.mbr, &(pL2_entry->portmask)))!=RT_ERR_OK) - return retVal; - - pL2_entry->ivl = l2Table.ivl_svl; - if(l2Table.ivl_svl == 1) /* IVL */ - { - pL2_entry->cvid = l2Table.cvid_fid; - pL2_entry->fid = 0; - } - else /* SVL*/ - { - pL2_entry->cvid = 0; - pL2_entry->fid = l2Table.cvid_fid; - } - pL2_entry->auth = l2Table.auth; - pL2_entry->sa_block = l2Table.sa_block; - pL2_entry->age = 0; - pL2_entry->is_ipvidmul = 0; - pL2_entry->l3_vid = 0; - } - else if((l2Table.age != 0)||(l2Table.nosalearn == 1)) - { - memset(&pL2_entry->sip, 0, sizeof(ipaddr_t)); - memset(&pL2_entry->dip, 0, sizeof(ipaddr_t)); - pL2_entry->mac.octet[0] = l2Table.mac.octet[0]; - pL2_entry->mac.octet[1] = l2Table.mac.octet[1]; - pL2_entry->mac.octet[2] = l2Table.mac.octet[2]; - pL2_entry->mac.octet[3] = l2Table.mac.octet[3]; - pL2_entry->mac.octet[4] = l2Table.mac.octet[4]; - pL2_entry->mac.octet[5] = l2Table.mac.octet[5]; - pL2_entry->is_ipmul = l2Table.l3lookup; - pL2_entry->is_static = l2Table.nosalearn; - - /* Get Logical port mask */ - if ((retVal = rtk_switch_portmask_P2L_get(1<<(l2Table.spa), &(pL2_entry->portmask)))!=RT_ERR_OK) - return retVal; - - pL2_entry->ivl = l2Table.ivl_svl; - pL2_entry->cvid = l2Table.cvid_fid; - pL2_entry->fid = l2Table.fid; - pL2_entry->auth = l2Table.auth; - pL2_entry->sa_block = l2Table.sa_block; - pL2_entry->age = l2Table.age; - pL2_entry->is_ipvidmul = 0; - pL2_entry->l3_vid = 0; - } - else - return RT_ERR_L2_EMPTY_ENTRY; - - return RT_ERR_OK; -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/leaky.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/leaky.c deleted file mode 100644 index 1b7d50a9e5..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/leaky.c +++ /dev/null @@ -1,590 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Leaky module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - - -/* Function Name: - * rtk_leaky_vlan_set - * Description: - * Set VLAN leaky. - * Input: - * type - Packet type for VLAN leaky. - * enable - Leaky status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input - * Note: - * This API can set VLAN leaky for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -rtk_api_ret_t rtk_leaky_vlan_set(rtk_leaky_type_t type, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 port; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= LEAKY_END) - return RT_ERR_INPUT; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (type >= 0 && type <= LEAKY_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.vlan_leaky = enable; - - if ((retVal = rtl8367c_setAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_IPMULTICAST == type) - { - for (port = 0; port <= RTK_PORT_ID_MAX; port++) - { - if ((retVal = rtl8367c_setAsicIpMulticastVlanLeaky(port,enable)) != RT_ERR_OK) - return retVal; - } - } - else if (LEAKY_IGMP == type) - { - if ((retVal = rtl8367c_setAsicIGMPVLANLeaky(enable)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_CDP == type) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.vlan_leaky = enable; - - if ((retVal = rtl8367c_setAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_CSSTP == type) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.vlan_leaky = enable; - - if ((retVal = rtl8367c_setAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_LLDP == type) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp,&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.vlan_leaky = enable; - - if ((retVal = rtl8367c_setAsicRmaLldp(tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_leaky_vlan_get - * Description: - * Get VLAN leaky. - * Input: - * type - Packet type for VLAN leaky. - * Output: - * pEnable - Leaky status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get VLAN leaky status for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -rtk_api_ret_t rtk_leaky_vlan_get(rtk_leaky_type_t type, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 port,tmp; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= LEAKY_END) - return RT_ERR_INPUT; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if (type >= 0 && type <= LEAKY_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.vlan_leaky; - - } - else if (LEAKY_IPMULTICAST == type) - { - for (port = 0; port <= RTK_PORT_ID_MAX; port++) - { - if ((retVal = rtl8367c_getAsicIpMulticastVlanLeaky(port, &tmp)) != RT_ERR_OK) - return retVal; - if (port>0&&(tmp!=*pEnable)) - return RT_ERR_FAILED; - *pEnable = tmp; - } - } - else if (LEAKY_IGMP == type) - { - if ((retVal = rtl8367c_getAsicIGMPVLANLeaky(&tmp)) != RT_ERR_OK) - return retVal; - - *pEnable = tmp; - } - else if (LEAKY_CDP == type) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.vlan_leaky; - } - else if (LEAKY_CSSTP == type) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.vlan_leaky; - } - else if (LEAKY_LLDP == type) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.vlan_leaky; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_leaky_portIsolation_set - * Description: - * Set port isolation leaky. - * Input: - * type - Packet type for port isolation leaky. - * enable - Leaky status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input - * Note: - * This API can set port isolation leaky for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -rtk_api_ret_t rtk_leaky_portIsolation_set(rtk_leaky_type_t type, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 port; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= LEAKY_END) - return RT_ERR_INPUT; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (type >= 0 && type <= LEAKY_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.portiso_leaky = enable; - - if ((retVal = rtl8367c_setAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_IPMULTICAST == type) - { - for (port = 0; port < RTK_MAX_NUM_OF_PORT; port++) - { - if ((retVal = rtl8367c_setAsicIpMulticastPortIsoLeaky(port,enable)) != RT_ERR_OK) - return retVal; - } - } - else if (LEAKY_IGMP == type) - { - if ((retVal = rtl8367c_setAsicIGMPIsoLeaky(enable)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_CDP == type) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.portiso_leaky = enable; - - if ((retVal = rtl8367c_setAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_CSSTP == type) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.portiso_leaky = enable; - - if ((retVal = rtl8367c_setAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (LEAKY_LLDP == type) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.portiso_leaky = enable; - - if ((retVal = rtl8367c_setAsicRmaLldp(tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_leaky_portIsolation_get - * Description: - * Get port isolation leaky. - * Input: - * type - Packet type for port isolation leaky. - * Output: - * pEnable - Leaky status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get port isolation leaky status for RMA ,IGMP/MLD, CDP, CSSTP, and LLDP packets. - * The leaky frame types are as following: - * - LEAKY_BRG_GROUP, - * - LEAKY_FD_PAUSE, - * - LEAKY_SP_MCAST, - * - LEAKY_1X_PAE, - * - LEAKY_UNDEF_BRG_04, - * - LEAKY_UNDEF_BRG_05, - * - LEAKY_UNDEF_BRG_06, - * - LEAKY_UNDEF_BRG_07, - * - LEAKY_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - LEAKY_UNDEF_BRG_09, - * - LEAKY_UNDEF_BRG_0A, - * - LEAKY_UNDEF_BRG_0B, - * - LEAKY_UNDEF_BRG_0C, - * - LEAKY_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - LEAKY_8021AB, - * - LEAKY_UNDEF_BRG_0F, - * - LEAKY_BRG_MNGEMENT, - * - LEAKY_UNDEFINED_11, - * - LEAKY_UNDEFINED_12, - * - LEAKY_UNDEFINED_13, - * - LEAKY_UNDEFINED_14, - * - LEAKY_UNDEFINED_15, - * - LEAKY_UNDEFINED_16, - * - LEAKY_UNDEFINED_17, - * - LEAKY_UNDEFINED_18, - * - LEAKY_UNDEFINED_19, - * - LEAKY_UNDEFINED_1A, - * - LEAKY_UNDEFINED_1B, - * - LEAKY_UNDEFINED_1C, - * - LEAKY_UNDEFINED_1D, - * - LEAKY_UNDEFINED_1E, - * - LEAKY_UNDEFINED_1F, - * - LEAKY_GMRP, - * - LEAKY_GVRP, - * - LEAKY_UNDEF_GARP_22, - * - LEAKY_UNDEF_GARP_23, - * - LEAKY_UNDEF_GARP_24, - * - LEAKY_UNDEF_GARP_25, - * - LEAKY_UNDEF_GARP_26, - * - LEAKY_UNDEF_GARP_27, - * - LEAKY_UNDEF_GARP_28, - * - LEAKY_UNDEF_GARP_29, - * - LEAKY_UNDEF_GARP_2A, - * - LEAKY_UNDEF_GARP_2B, - * - LEAKY_UNDEF_GARP_2C, - * - LEAKY_UNDEF_GARP_2D, - * - LEAKY_UNDEF_GARP_2E, - * - LEAKY_UNDEF_GARP_2F, - * - LEAKY_IGMP, - * - LEAKY_IPMULTICAST. - * - LEAKY_CDP, - * - LEAKY_CSSTP, - * - LEAKY_LLDP. - */ -rtk_api_ret_t rtk_leaky_portIsolation_get(rtk_leaky_type_t type, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 port, tmp; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= LEAKY_END) - return RT_ERR_INPUT; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if (type >= 0 && type <= LEAKY_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.portiso_leaky; - - } - else if (LEAKY_IPMULTICAST == type) - { - for (port = 0; port < RTK_MAX_NUM_OF_PORT; port++) - { - if ((retVal = rtl8367c_getAsicIpMulticastPortIsoLeaky(port, &tmp)) != RT_ERR_OK) - return retVal; - if (port > 0 &&(tmp != *pEnable)) - return RT_ERR_FAILED; - *pEnable = tmp; - } - } - else if (LEAKY_IGMP == type) - { - if ((retVal = rtl8367c_getAsicIGMPIsoLeaky(&tmp)) != RT_ERR_OK) - return retVal; - - *pEnable = tmp; - } - else if (LEAKY_CDP == type) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.portiso_leaky; - } - else if (LEAKY_CSSTP == type) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.portiso_leaky; - } - else if (LEAKY_LLDP == type) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.portiso_leaky; - } - - - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c deleted file mode 100644 index c00c331d8a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c +++ /dev/null @@ -1,792 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in LED module. - * - */ - -#include -#include -#include -#include - -#include -#include - - -/* Function Name: - * rtk_led_enable_set - * Description: - * Set Led enable congiuration - * Input: - * group - LED group id. - * pPortmask - LED enable port mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_MASK - Error portmask - * Note: - * The API can be used to enable LED per port per group. - */ -rtk_api_ret_t rtk_led_enable_set(rtk_led_group_t group, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - rtk_port_t port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - RTK_CHK_PORTMASK_VALID(pPortmask); - - RTK_PORTMASK_SCAN((*pPortmask), port) - { - if(rtk_switch_isCPUPort(port) == RT_ERR_OK) - return RT_ERR_PORT_MASK; - } - - if((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLedGroupEnable(group, pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_enable_get - * Description: - * Get Led enable congiuration - * Input: - * group - LED group id. - * Output: - * pPortmask - LED enable port mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can be used to get LED enable status. - */ -rtk_api_ret_t rtk_led_enable_get(rtk_led_group_t group, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicLedGroupEnable(group, &pmask)) != RT_ERR_OK) - return retVal; - - if((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_led_operation_set - * Description: - * Set Led operation mode - * Input: - * mode - LED operation mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set Led operation mode. - * The modes that can be set are as following: - * - LED_OP_SCAN, - * - LED_OP_PARALLEL, - * - LED_OP_SERIAL, - */ -rtk_api_ret_t rtk_led_operation_set(rtk_led_operation_t mode) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ( mode >= LED_OP_END) - return RT_ERR_INPUT; - - switch (mode) - { - case LED_OP_PARALLEL: - regData = LEDOP_PARALLEL; - break; - case LED_OP_SERIAL: - regData = LEDOP_SERIAL; - break; - default: - return RT_ERR_CHIP_NOT_SUPPORTED; - break; - } - - if ((retVal = rtl8367c_setAsicLedOperationMode(regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_operation_get - * Description: - * Get Led operation mode - * Input: - * None - * Output: - * pMode - Support LED operation mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get Led operation mode. - * The modes that can be set are as following: - * - LED_OP_SCAN, - * - LED_OP_PARALLEL, - * - LED_OP_SERIAL, - */ -rtk_api_ret_t rtk_led_operation_get(rtk_led_operation_t *pMode) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedOperationMode(®Data)) != RT_ERR_OK) - return retVal; - - if (regData == LEDOP_SERIAL) - *pMode = LED_OP_SERIAL; - else if (regData ==LEDOP_PARALLEL) - *pMode = LED_OP_PARALLEL; - else - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_modeForce_set - * Description: - * Set Led group to congiuration force mode - * Input: - * port - port ID - * group - Support LED group id. - * mode - Support LED force mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Error Port ID - * Note: - * The API can force to one force mode. - * The force modes that can be set are as following: - * - LED_FORCE_NORMAL, - * - LED_FORCE_BLINK, - * - LED_FORCE_OFF, - * - LED_FORCE_ON. - */ -rtk_api_ret_t rtk_led_modeForce_set(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t mode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /* No LED for CPU port */ - if(rtk_switch_isCPUPort(port) == RT_ERR_OK) - return RT_ERR_PORT_ID; - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - if (mode >= LED_FORCE_END) - return RT_ERR_NOT_ALLOWED; - - if ((retVal = rtl8367c_setAsicForceLed(rtk_switch_port_L2P_get(port), group, mode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_modeForce_get - * Description: - * Get Led group to congiuration force mode - * Input: - * port - port ID - * group - Support LED group id. - * pMode - Support LED force mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Error Port ID - * Note: - * The API can get forced Led group mode. - * The force modes that can be set are as following: - * - LED_FORCE_NORMAL, - * - LED_FORCE_BLINK, - * - LED_FORCE_OFF, - * - LED_FORCE_ON. - */ -rtk_api_ret_t rtk_led_modeForce_get(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t *pMode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /* No LED for CPU port */ - if(rtk_switch_isCPUPort(port) == RT_ERR_OK) - return RT_ERR_PORT_ID; - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - if (NULL == pMode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicForceLed(rtk_switch_port_L2P_get(port), group, pMode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_blinkRate_set - * Description: - * Set LED blinking rate - * Input: - * blinkRate - blinking rate. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * ASIC support 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms. - */ -rtk_api_ret_t rtk_led_blinkRate_set(rtk_led_blink_rate_t blinkRate) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (blinkRate >= LED_BLINKRATE_END) - return RT_ERR_FAILED; - - if ((retVal = rtl8367c_setAsicLedBlinkRate(blinkRate)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_blinkRate_get - * Description: - * Get LED blinking rate at mode 0 to mode 3 - * Input: - * None - * Output: - * pBlinkRate - blinking rate. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms. - */ -rtk_api_ret_t rtk_led_blinkRate_get(rtk_led_blink_rate_t *pBlinkRate) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pBlinkRate) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedBlinkRate(pBlinkRate)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupConfig_set - * Description: - * Set per group Led to congiuration mode - * Input: - * group - LED group. - * config - LED configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set LED indicated information configuration for each LED group with 1 to 1 led mapping to each port. - * - Definition LED Statuses Description - * - 0000 LED_Off LED pin Tri-State. - * - 0001 Dup/Col Collision, Full duplex Indicator. - * - 0010 Link/Act Link, Activity Indicator. - * - 0011 Spd1000 1000Mb/s Speed Indicator. - * - 0100 Spd100 100Mb/s Speed Indicator. - * - 0101 Spd10 10Mb/s Speed Indicator. - * - 0110 Spd1000/Act 1000Mb/s Speed/Activity Indicator. - * - 0111 Spd100/Act 100Mb/s Speed/Activity Indicator. - * - 1000 Spd10/Act 10Mb/s Speed/Activity Indicator. - * - 1001 Spd100 (10)/Act 10/100Mb/s Speed/Activity Indicator. - * - 1010 LoopDetect LoopDetect Indicator. - * - 1011 EEE EEE Indicator. - * - 1100 Link/Rx Link, Activity Indicator. - * - 1101 Link/Tx Link, Activity Indicator. - * - 1110 Master Link on Master Indicator. - * - 1111 Act Activity Indicator. Low for link established. - */ -rtk_api_ret_t rtk_led_groupConfig_set(rtk_led_group_t group, rtk_led_congig_t config) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if (LED_CONFIG_END <= config) - return RT_ERR_FAILED; - - if ((retVal = rtl8367c_setAsicLedIndicateInfoConfig(group, config)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupConfig_get - * Description: - * Get Led group congiuration mode - * Input: - * group - LED group. - * Output: - * pConfig - LED configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get LED indicated information configuration for each LED group. - */ -rtk_api_ret_t rtk_led_groupConfig_get(rtk_led_group_t group, rtk_led_congig_t *pConfig) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if(NULL == pConfig) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedIndicateInfoConfig(group, pConfig)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupAbility_set - * Description: - * Configure per group Led ability - * Input: - * group - LED group. - * pAbility - LED ability - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * None. - */ - -rtk_api_ret_t rtk_led_groupAbility_set(rtk_led_group_t group, rtk_led_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if(pAbility == NULL) - return RT_ERR_NULL_POINTER; - - if( (pAbility->link_10m >= RTK_ENABLE_END) || (pAbility->link_100m >= RTK_ENABLE_END)|| - (pAbility->link_500m >= RTK_ENABLE_END) || (pAbility->link_1000m >= RTK_ENABLE_END)|| - (pAbility->act_rx >= RTK_ENABLE_END) || (pAbility->act_tx >= RTK_ENABLE_END) ) - { - return RT_ERR_INPUT; - } - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, ®Data)) != RT_ERR_OK) - return retVal; - - if(pAbility->link_10m == ENABLED) - regData |= 0x0001; - else - regData &= ~0x0001; - - if(pAbility->link_100m == ENABLED) - regData |= 0x0002; - else - regData &= ~0x0002; - - if(pAbility->link_500m == ENABLED) - regData |= 0x0004; - else - regData &= ~0x0004; - - if(pAbility->link_1000m == ENABLED) - regData |= 0x0008; - else - regData &= ~0x0008; - - if(pAbility->act_rx == ENABLED) - regData |= 0x0010; - else - regData &= ~0x0010; - - if(pAbility->act_tx == ENABLED) - regData |= 0x0020; - else - regData &= ~0x0020; - - regData |= (0x0001 << 6); - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupAbility_get - * Description: - * Get per group Led ability - * Input: - * group - LED group. - * pAbility - LED ability - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * None. - */ - -rtk_api_ret_t rtk_led_groupAbility_get(rtk_led_group_t group, rtk_led_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if(pAbility == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, ®Data)) != RT_ERR_OK) - return retVal; - - pAbility->link_10m = (regData & 0x0001) ? ENABLED : DISABLED; - pAbility->link_100m = (regData & 0x0002) ? ENABLED : DISABLED; - pAbility->link_500m = (regData & 0x0004) ? ENABLED : DISABLED; - pAbility->link_1000m = (regData & 0x0008) ? ENABLED : DISABLED; - pAbility->act_rx = (regData & 0x0010) ? ENABLED : DISABLED; - pAbility->act_tx = (regData & 0x0020) ? ENABLED : DISABLED; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_led_serialMode_set - * Description: - * Set Led serial mode active congiuration - * Input: - * active - LED group. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set LED serial mode active congiuration. - */ -rtk_api_ret_t rtk_led_serialMode_set(rtk_led_active_t active) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ( active >= LED_ACTIVE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicLedSerialModeConfig(active,1))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_serialMode_get - * Description: - * Get Led group congiuration mode - * Input: - * group - LED group. - * Output: - * pConfig - LED configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get LED serial mode active configuration. - */ -rtk_api_ret_t rtk_led_serialMode_get(rtk_led_active_t *pActive) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pActive) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedSerialModeConfig(pActive,®Data))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_OutputEnable_set - * Description: - * This API set LED I/O state. - * Input: - * enabled - LED I/O state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set LED I/O state. - */ -rtk_api_ret_t rtk_led_OutputEnable_set(rtk_enable_t state) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (state >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicLedOutputEnable(state))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_OutputEnable_get - * Description: - * This API get LED I/O state. - * Input: - * None. - * Output: - * pEnabled - LED I/O state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current LED I/O state. - */ -rtk_api_ret_t rtk_led_OutputEnable_get(rtk_enable_t *pState) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pState == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedOutputEnable(pState))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_led_serialModePortmask_set - * Description: - * This API configure Serial LED output Group and portmask - * Input: - * output - output group - * pPortmask - output portmask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * None. - */ -rtk_api_ret_t rtk_led_serialModePortmask_set(rtk_led_serialOutput_t output, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(output >= SERIAL_LED_END) - return RT_ERR_INPUT; - - if(pPortmask == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLedSerialOutput((rtk_uint32)output, pmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_serialModePortmask_get - * Description: - * This API get Serial LED output Group and portmask - * Input: - * None. - * Output: - * pOutput - output group - * pPortmask - output portmask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * None. - */ -rtk_api_ret_t rtk_led_serialModePortmask_get(rtk_led_serialOutput_t *pOutput, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pOutput == NULL) - return RT_ERR_NULL_POINTER; - - if(pPortmask == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedSerialOutput((rtk_uint32 *)pOutput, &pmask))!=RT_ERR_OK) - return retVal; - - if((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/mirror.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/mirror.c deleted file mode 100644 index 1921d1a5af..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/mirror.c +++ /dev/null @@ -1,548 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Mirror module. - * - */ - -#include -#include -#include -#include -#include -#include - -/* Function Name: - * rtk_mirror_portBased_set - * Description: - * Set port mirror function. - * Input: - * mirroring_port - Monitor port. - * pMirrored_rx_portmask - Rx mirror port mask. - * pMirrored_tx_portmask - Tx mirror port mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * The API is to set mirror function of source port and mirror port. - * The mirror port can only be set to one port and the TX and RX mirror ports - * should be identical. - */ -rtk_api_ret_t rtk_mirror_portBased_set(rtk_port_t mirroring_port, rtk_portmask_t *pMirrored_rx_portmask, rtk_portmask_t *pMirrored_tx_portmask) -{ - rtk_api_ret_t retVal; - rtk_enable_t mirRx, mirTx; - rtk_uint32 i, pmask; - rtk_port_t source_port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(mirroring_port); - - if(NULL == pMirrored_rx_portmask) - return RT_ERR_NULL_POINTER; - - if(NULL == pMirrored_tx_portmask) - return RT_ERR_NULL_POINTER; - - RTK_CHK_PORTMASK_VALID(pMirrored_rx_portmask); - - RTK_CHK_PORTMASK_VALID(pMirrored_tx_portmask); - - /*Mirror Sorce Port Mask Check*/ - if (pMirrored_tx_portmask->bits[0]!=pMirrored_rx_portmask->bits[0]&&pMirrored_tx_portmask->bits[0]!=0&&pMirrored_rx_portmask->bits[0]!=0) - return RT_ERR_PORT_MASK; - - /*mirror port != source port*/ - if(RTK_PORTMASK_IS_PORT_SET((*pMirrored_tx_portmask), mirroring_port) || RTK_PORTMASK_IS_PORT_SET((*pMirrored_rx_portmask), mirroring_port)) - return RT_ERR_PORT_MASK; - - source_port = rtk_switch_maxLogicalPort_get(); - - RTK_SCAN_ALL_LOG_PORT(i) - { - if (pMirrored_tx_portmask->bits[0]&(1<bits[0]&(1<bits[0] != 0) - { - if ((retVal = rtk_switch_portmask_L2P_get(pMirrored_rx_portmask, &pmask)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicPortMirrorMask(pmask)) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtk_switch_portmask_L2P_get(pMirrored_tx_portmask, &pmask)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicPortMirrorMask(pmask)) != RT_ERR_OK) - return retVal; - } - - - if (pMirrored_rx_portmask->bits[0]) - mirRx = ENABLED; - else - mirRx = DISABLED; - - if ((retVal = rtl8367c_setAsicPortMirrorRxFunction(mirRx)) != RT_ERR_OK) - return retVal; - - if (pMirrored_tx_portmask->bits[0]) - mirTx = ENABLED; - else - mirTx = DISABLED; - - if ((retVal = rtl8367c_setAsicPortMirrorTxFunction(mirTx)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_mirror_portBased_get - * Description: - * Get port mirror function. - * Input: - * None - * Output: - * pMirroring_port - Monitor port. - * pMirrored_rx_portmask - Rx mirror port mask. - * pMirrored_tx_portmask - Tx mirror port mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror function of source port and mirror port. - */ -rtk_api_ret_t rtk_mirror_portBased_get(rtk_port_t *pMirroring_port, rtk_portmask_t *pMirrored_rx_portmask, rtk_portmask_t *pMirrored_tx_portmask) -{ - rtk_api_ret_t retVal; - rtk_port_t source_port; - rtk_enable_t mirRx, mirTx; - rtk_uint32 sport, mport, pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMirrored_rx_portmask) - return RT_ERR_NULL_POINTER; - - if(NULL == pMirrored_tx_portmask) - return RT_ERR_NULL_POINTER; - - if(NULL == pMirroring_port) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortMirror(&sport, &mport)) != RT_ERR_OK) - return retVal; - source_port = rtk_switch_port_P2L_get(sport); - *pMirroring_port = rtk_switch_port_P2L_get(mport); - - if ((retVal = rtl8367c_getAsicPortMirrorRxFunction((rtk_uint32*)&mirRx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortMirrorTxFunction((rtk_uint32*)&mirTx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortMirrorMask(&pmask)) != RT_ERR_OK) - return retVal; - - if (DISABLED == mirRx) - pMirrored_rx_portmask->bits[0]=0; - else - { - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pMirrored_rx_portmask)) != RT_ERR_OK) - return retVal; - pMirrored_rx_portmask->bits[0] |= 1<bits[0]=0; - else - { - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pMirrored_tx_portmask)) != RT_ERR_OK) - return retVal; - pMirrored_tx_portmask->bits[0] |= 1<= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortMirrorIsolation(enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_portIso_get - * Description: - * Get mirror port isolation. - * Input: - * None - * Output: - * pEnable |Mirror isolation status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror isolation status. - */ -rtk_api_ret_t rtk_mirror_portIso_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortMirrorIsolation(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_vlanLeaky_set - * Description: - * Set mirror VLAN leaky. - * Input: - * txenable -TX leaky enable. - * rxenable - RX leaky enable. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set mirror VLAN leaky function forwarding packets to miror port. - */ -rtk_api_ret_t rtk_mirror_vlanLeaky_set(rtk_enable_t txenable, rtk_enable_t rxenable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((txenable >= RTK_ENABLE_END) ||(rxenable >= RTK_ENABLE_END)) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortMirrorVlanTxLeaky(txenable)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPortMirrorVlanRxLeaky(rxenable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_vlanLeaky_get - * Description: - * Get mirror VLAN leaky. - * Input: - * None - * Output: - * pTxenable - TX leaky enable. - * pRxenable - RX leaky enable. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror VLAN leaky status. - */ -rtk_api_ret_t rtk_mirror_vlanLeaky_get(rtk_enable_t *pTxenable, rtk_enable_t *pRxenable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if( (NULL == pTxenable) || (NULL == pRxenable) ) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortMirrorVlanTxLeaky(pTxenable)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortMirrorVlanRxLeaky(pRxenable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_isolationLeaky_set - * Description: - * Set mirror Isolation leaky. - * Input: - * txenable -TX leaky enable. - * rxenable - RX leaky enable. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set mirror VLAN leaky function forwarding packets to miror port. - */ -rtk_api_ret_t rtk_mirror_isolationLeaky_set(rtk_enable_t txenable, rtk_enable_t rxenable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((txenable >= RTK_ENABLE_END) ||(rxenable >= RTK_ENABLE_END)) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortMirrorIsolationTxLeaky(txenable)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPortMirrorIsolationRxLeaky(rxenable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_isolationLeaky_get - * Description: - * Get mirror isolation leaky. - * Input: - * None - * Output: - * pTxenable - TX leaky enable. - * pRxenable - RX leaky enable. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror isolation leaky status. - */ -rtk_api_ret_t rtk_mirror_isolationLeaky_get(rtk_enable_t *pTxenable, rtk_enable_t *pRxenable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if( (NULL == pTxenable) || (NULL == pRxenable) ) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortMirrorIsolationTxLeaky(pTxenable)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortMirrorIsolationRxLeaky(pRxenable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_keep_set - * Description: - * Set mirror packet format keep. - * Input: - * mode - -mirror keep mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The API is to set -mirror keep mode. - * The mirror keep mode is as following: - * - MIRROR_FOLLOW_VLAN - * - MIRROR_KEEP_ORIGINAL - * - MIRROR_KEEP_END - */ -rtk_api_ret_t rtk_mirror_keep_set(rtk_mirror_keep_t mode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (mode >= MIRROR_KEEP_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortMirrorRealKeep(mode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_keep_get - * Description: - * Get mirror packet format keep. - * Input: - * None - * Output: - * pMode -mirror keep mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API is to get mirror keep mode. - * The mirror keep mode is as following: - * - MIRROR_FOLLOW_VLAN - * - MIRROR_KEEP_ORIGINAL - * - MIRROR_KEEP_END - */ -rtk_api_ret_t rtk_mirror_keep_get(rtk_mirror_keep_t *pMode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortMirrorRealKeep(pMode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_override_set - * Description: - * Set port mirror override function. - * Input: - * rxMirror - 1: output mirrored packet, 0: output normal forward packet - * txMirror - 1: output mirrored packet, 0: output normal forward packet - * aclMirror - 1: output mirrored packet, 0: output normal forward packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API is to set mirror override function. - * This function control the output format when a port output - * normal forward & mirrored packet at the same time. - */ -rtk_api_ret_t rtk_mirror_override_set(rtk_enable_t rxMirror, rtk_enable_t txMirror, rtk_enable_t aclMirror) -{ - rtk_api_ret_t retVal; - - if( (rxMirror >= RTK_ENABLE_END) || (txMirror >= RTK_ENABLE_END) || (aclMirror >= RTK_ENABLE_END)) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortMirrorOverride((rtk_uint32)rxMirror, (rtk_uint32)txMirror, (rtk_uint32)aclMirror)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_mirror_override_get - * Description: - * Get port mirror override function. - * Input: - * None - * Output: - * pRxMirror - 1: output mirrored packet, 0: output normal forward packet - * pTxMirror - 1: output mirrored packet, 0: output normal forward packet - * pAclMirror - 1: output mirrored packet, 0: output normal forward packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null Pointer - * Note: - * The API is to Get mirror override function. - * This function control the output format when a port output - * normal forward & mirrored packet at the same time. - */ -rtk_api_ret_t rtk_mirror_override_get(rtk_enable_t *pRxMirror, rtk_enable_t *pTxMirror, rtk_enable_t *pAclMirror) -{ - rtk_api_ret_t retVal; - - if( (pRxMirror == NULL) || (pTxMirror == NULL) || (pAclMirror == NULL)) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_getAsicPortMirrorOverride((rtk_uint32 *)pRxMirror, (rtk_uint32 *)pTxMirror, (rtk_uint32 *)pAclMirror)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/oam.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/oam.c deleted file mode 100644 index dc1559ae3e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/oam.c +++ /dev/null @@ -1,245 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in OAM(802.3ah) module. - * - */ - -#include -#include -#include -#include - -#include -#include - - -/* Module Name : OAM */ - -/* Function Name: - * rtk_oam_init - * Description: - * Initialize oam module. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * Must initialize oam module before calling any oam APIs. - */ -rtk_api_ret_t rtk_oam_init(void) -{ - return RT_ERR_OK; -} /* end of rtk_oam_init */ - - -/* Function Name: - * rtk_oam_state_set - * Description: - * This API set OAM state. - * Input: - * enabled -OAMstate - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set OAM state. - */ -rtk_api_ret_t rtk_oam_state_set(rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enabled >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicOamEnable(enabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_oam_state_get - * Description: - * This API get OAM state. - * Input: - * None. - * Output: - * pEnabled - H/W IGMP state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current OAM state. - */ -rtk_api_ret_t rtk_oam_state_get(rtk_enable_t *pEnabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicOamEnable(pEnabled))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - - -/* Function Name: - * rtk_oam_parserAction_set - * Description: - * Set OAM parser action - * Input: - * port - port id - * action - parser action - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -rtk_api_ret_t rtk_oam_parserAction_set(rtk_port_t port, rtk_oam_parser_act_t action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (action >= OAM_PARSER_ACTION_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicOamParser(rtk_switch_port_L2P_get(port), action))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_oam_parserAction_set - * Description: - * Get OAM parser action - * Input: - * port - port id - * Output: - * pAction - parser action - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -rtk_api_ret_t rtk_oam_parserAction_get(rtk_port_t port, rtk_oam_parser_act_t *pAction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicOamParser(rtk_switch_port_L2P_get(port), pAction))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_oam_multiplexerAction_set - * Description: - * Set OAM multiplexer action - * Input: - * port - port id - * action - parser action - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -rtk_api_ret_t rtk_oam_multiplexerAction_set(rtk_port_t port, rtk_oam_multiplexer_act_t action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (action >= OAM_MULTIPLEXER_ACTION_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicOamMultiplexer(rtk_switch_port_L2P_get(port), action))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_oam_parserAction_set - * Description: - * Get OAM multiplexer action - * Input: - * port - port id - * Output: - * pAction - parser action - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * Note: - * None - */ -rtk_api_ret_t rtk_oam_multiplexerAction_get(rtk_port_t port, rtk_oam_multiplexer_act_t *pAction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicOamMultiplexer(rtk_switch_port_L2P_get(port), pAction))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/port.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/port.c deleted file mode 100644 index 9f99d1b3dc..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/port.c +++ /dev/null @@ -1,2467 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Port module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -#define FIBER_INIT_SIZE 1507 -CONST_T rtk_uint8 Fiber[FIBER_INIT_SIZE] = { -0x02,0x04,0x41,0xE4,0xF5,0xA8,0xD2,0xAF, -0x22,0x00,0x00,0x02,0x05,0x2D,0xE4,0x90, -0x06,0x2A,0xF0,0xFD,0x7C,0x01,0x7F,0x3F, -0x7E,0x1D,0x12,0x05,0xAF,0x7D,0x40,0x12, -0x02,0x5F,0xE4,0xFF,0xFE,0xFD,0x80,0x08, -0x12,0x05,0x9E,0x50,0x0C,0x12,0x05,0x8B, -0xFC,0x90,0x06,0x24,0x12,0x03,0x76,0x80, -0xEF,0xE4,0xF5,0xA8,0xD2,0xAF,0x7D,0x1F, -0xFC,0x7F,0x49,0x7E,0x13,0x12,0x05,0xAF, -0x12,0x05,0xD6,0x7D,0xD7,0x12,0x02,0x1E, -0x7D,0x80,0x12,0x01,0xCA,0x7D,0x94,0x7C, -0xF9,0x12,0x02,0x3B,0x7D,0x81,0x12,0x01, -0xCA,0x7D,0xA2,0x7C,0x31,0x12,0x02,0x3B, -0x7D,0x82,0x12,0x01,0xDF,0x7D,0x60,0x7C, -0x69,0x12,0x02,0x43,0x7D,0x83,0x12,0x01, -0xDF,0x7D,0x28,0x7C,0x97,0x12,0x02,0x43, -0x7D,0x84,0x12,0x01,0xF4,0x7D,0x85,0x7C, -0x9D,0x12,0x02,0x57,0x7D,0x23,0x12,0x01, -0xF4,0x7D,0x10,0x7C,0xD8,0x12,0x02,0x57, -0x7D,0x24,0x7C,0x04,0x12,0x02,0x28,0x7D, -0x00,0x12,0x02,0x1E,0x7D,0x2F,0x12,0x02, -0x09,0x7D,0x20,0x7C,0x0F,0x7F,0x02,0x7E, -0x66,0x12,0x05,0xAF,0x7D,0x01,0x12,0x02, -0x09,0x7D,0x04,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x05,0xAF,0x7D,0x80,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x05,0xAF,0x7F, -0x02,0x7E,0x66,0x12,0x02,0x4B,0x44,0x02, -0xFF,0x90,0x06,0x28,0xEE,0xF0,0xA3,0xEF, -0xF0,0x44,0x04,0xFF,0x90,0x06,0x28,0xEE, -0xF0,0xFC,0xA3,0xEF,0xF0,0xFD,0x7F,0x02, -0x7E,0x66,0x12,0x05,0xAF,0x7D,0x04,0x7C, -0x00,0x12,0x02,0x28,0x7D,0xB9,0x7C,0x15, -0x7F,0xEB,0x7E,0x13,0x12,0x05,0xAF,0x7D, -0x07,0x7C,0x00,0x7F,0xE7,0x7E,0x13,0x12, -0x05,0xAF,0x7D,0x40,0x7C,0x11,0x7F,0x00, -0x7E,0x62,0x12,0x05,0xAF,0x12,0x03,0x82, -0x7D,0x41,0x12,0x02,0x5F,0xE4,0xFF,0xFE, -0xFD,0x80,0x08,0x12,0x05,0x9E,0x50,0x0C, -0x12,0x05,0x8B,0xFC,0x90,0x06,0x24,0x12, -0x03,0x76,0x80,0xEF,0xC2,0x00,0xC2,0x01, -0xD2,0xA9,0xD2,0x8C,0x7F,0x01,0x7E,0x62, -0x12,0x02,0x4B,0x30,0xE2,0x05,0xE4,0xA3, -0xF0,0x80,0xF1,0x90,0x06,0x2A,0xE0,0x70, -0x12,0x12,0x01,0x89,0x90,0x06,0x2A,0x74, -0x01,0xF0,0xE4,0x90,0x06,0x2D,0xF0,0xA3, -0xF0,0x80,0xD9,0xC3,0x90,0x06,0x2E,0xE0, -0x94,0x64,0x90,0x06,0x2D,0xE0,0x94,0x00, -0x40,0xCA,0xE4,0xF0,0xA3,0xF0,0x12,0x01, -0x89,0x90,0x06,0x2A,0x74,0x01,0xF0,0x80, -0xBB,0x7D,0x04,0xFC,0x7F,0x02,0x7E,0x66, -0x12,0x05,0xAF,0x7D,0x00,0x7C,0x04,0x7F, -0x01,0x7E,0x66,0x12,0x05,0xAF,0x7D,0xC0, -0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12,0x05, -0xAF,0xE4,0xFD,0xFC,0x7F,0x02,0x7E,0x66, -0x12,0x05,0xAF,0x7D,0x00,0x7C,0x04,0x7F, -0x01,0x7E,0x66,0x12,0x05,0xAF,0x7D,0xC0, -0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12,0x05, -0xAF,0x22,0x7C,0x04,0x7F,0x01,0x7E,0x66, -0x12,0x05,0xAF,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x05,0xAF,0x22,0x7C, -0x04,0x7F,0x01,0x7E,0x66,0x12,0x05,0xAF, -0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66, -0x12,0x05,0xAF,0x22,0x7C,0x04,0x7F,0x01, -0x7E,0x66,0x12,0x05,0xAF,0x7D,0xC0,0x7C, -0x00,0x7F,0x00,0x7E,0x66,0x12,0x05,0xAF, -0x22,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x05,0xAF,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x05,0xAF,0x22,0x7C,0x04, -0x7F,0x02,0x7E,0x66,0x12,0x05,0xAF,0x22, -0x7F,0x01,0x7E,0x66,0x12,0x05,0xAF,0x7D, -0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x05,0xAF,0x22,0x7F,0x02,0x7E,0x66,0x12, -0x05,0xAF,0x22,0x7F,0x02,0x7E,0x66,0x12, -0x05,0xAF,0x22,0x12,0x05,0x67,0x90,0x06, -0x28,0xEE,0xF0,0xA3,0xEF,0xF0,0x22,0x7F, -0x02,0x7E,0x66,0x12,0x05,0xAF,0x22,0x7C, -0x00,0x7F,0x36,0x7E,0x13,0x12,0x05,0xAF, -0x22,0xC5,0xF0,0xF8,0xA3,0xE0,0x28,0xF0, -0xC5,0xF0,0xF8,0xE5,0x82,0x15,0x82,0x70, -0x02,0x15,0x83,0xE0,0x38,0xF0,0x22,0x75, -0xF0,0x08,0x75,0x82,0x00,0xEF,0x2F,0xFF, -0xEE,0x33,0xFE,0xCD,0x33,0xCD,0xCC,0x33, -0xCC,0xC5,0x82,0x33,0xC5,0x82,0x9B,0xED, -0x9A,0xEC,0x99,0xE5,0x82,0x98,0x40,0x0C, -0xF5,0x82,0xEE,0x9B,0xFE,0xED,0x9A,0xFD, -0xEC,0x99,0xFC,0x0F,0xD5,0xF0,0xD6,0xE4, -0xCE,0xFB,0xE4,0xCD,0xFA,0xE4,0xCC,0xF9, -0xA8,0x82,0x22,0xB8,0x00,0xC1,0xB9,0x00, -0x59,0xBA,0x00,0x2D,0xEC,0x8B,0xF0,0x84, -0xCF,0xCE,0xCD,0xFC,0xE5,0xF0,0xCB,0xF9, -0x78,0x18,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xED,0x33,0xFD,0xEC,0x33,0xFC,0xEB,0x33, -0xFB,0x10,0xD7,0x03,0x99,0x40,0x04,0xEB, -0x99,0xFB,0x0F,0xD8,0xE5,0xE4,0xF9,0xFA, -0x22,0x78,0x18,0xEF,0x2F,0xFF,0xEE,0x33, -0xFE,0xED,0x33,0xFD,0xEC,0x33,0xFC,0xC9, -0x33,0xC9,0x10,0xD7,0x05,0x9B,0xE9,0x9A, -0x40,0x07,0xEC,0x9B,0xFC,0xE9,0x9A,0xF9, -0x0F,0xD8,0xE0,0xE4,0xC9,0xFA,0xE4,0xCC, -0xFB,0x22,0x75,0xF0,0x10,0xEF,0x2F,0xFF, -0xEE,0x33,0xFE,0xED,0x33,0xFD,0xCC,0x33, -0xCC,0xC8,0x33,0xC8,0x10,0xD7,0x07,0x9B, -0xEC,0x9A,0xE8,0x99,0x40,0x0A,0xED,0x9B, -0xFD,0xEC,0x9A,0xFC,0xE8,0x99,0xF8,0x0F, -0xD5,0xF0,0xDA,0xE4,0xCD,0xFB,0xE4,0xCC, -0xFA,0xE4,0xC8,0xF9,0x22,0xEB,0x9F,0xF5, -0xF0,0xEA,0x9E,0x42,0xF0,0xE9,0x9D,0x42, -0xF0,0xE8,0x9C,0x45,0xF0,0x22,0xE0,0xFC, -0xA3,0xE0,0xFD,0xA3,0xE0,0xFE,0xA3,0xE0, -0xFF,0x22,0xE0,0xF8,0xA3,0xE0,0xF9,0xA3, -0xE0,0xFA,0xA3,0xE0,0xFB,0x22,0xEC,0xF0, -0xA3,0xED,0xF0,0xA3,0xEE,0xF0,0xA3,0xEF, -0xF0,0x22,0x12,0x03,0xF8,0x12,0x04,0x1A, -0x44,0x40,0x12,0x04,0x0F,0x7D,0x03,0x7C, -0x00,0x12,0x04,0x23,0x12,0x05,0xAF,0x12, -0x03,0xF8,0x12,0x04,0x1A,0x54,0xBF,0x12, -0x04,0x0F,0x7D,0x03,0x7C,0x00,0x12,0x03, -0xD0,0x7F,0x02,0x7E,0x66,0x12,0x05,0x67, -0xEF,0x54,0xFD,0x54,0xFE,0x12,0x04,0x33, -0x12,0x03,0xD0,0x7F,0x02,0x7E,0x66,0x12, -0x05,0x67,0xEF,0x44,0x02,0x44,0x01,0x12, -0x04,0x33,0x12,0x04,0x23,0x02,0x05,0xAF, -0x7F,0x01,0x7E,0x66,0x12,0x05,0xAF,0x7D, -0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x05,0xAF,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x05,0xAF,0x7D,0x80,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x05,0xAF,0x22, -0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66, -0x12,0x05,0xAF,0x7D,0x80,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x05,0xAF,0x22,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x05, -0xAF,0x22,0x7F,0x02,0x7E,0x66,0x12,0x05, -0x67,0xEF,0x22,0x7F,0x01,0x7E,0x66,0x12, -0x05,0xAF,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x22,0xFD,0xAC,0x06,0x7F,0x02, -0x7E,0x66,0x12,0x05,0xAF,0xE4,0xFD,0xFC, -0x22,0x78,0x7F,0xE4,0xF6,0xD8,0xFD,0x75, -0x81,0x3C,0x02,0x04,0x88,0x02,0x00,0x0E, -0xE4,0x93,0xA3,0xF8,0xE4,0x93,0xA3,0x40, -0x03,0xF6,0x80,0x01,0xF2,0x08,0xDF,0xF4, -0x80,0x29,0xE4,0x93,0xA3,0xF8,0x54,0x07, -0x24,0x0C,0xC8,0xC3,0x33,0xC4,0x54,0x0F, -0x44,0x20,0xC8,0x83,0x40,0x04,0xF4,0x56, -0x80,0x01,0x46,0xF6,0xDF,0xE4,0x80,0x0B, -0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80, -0x90,0x05,0xCB,0xE4,0x7E,0x01,0x93,0x60, -0xBC,0xA3,0xFF,0x54,0x3F,0x30,0xE5,0x09, -0x54,0x1F,0xFE,0xE4,0x93,0xA3,0x60,0x01, -0x0E,0xCF,0x54,0xC0,0x25,0xE0,0x60,0xA8, -0x40,0xB8,0xE4,0x93,0xA3,0xFA,0xE4,0x93, -0xA3,0xF8,0xE4,0x93,0xA3,0xC8,0xC5,0x82, -0xC8,0xCA,0xC5,0x83,0xCA,0xF0,0xA3,0xC8, -0xC5,0x82,0xC8,0xCA,0xC5,0x83,0xCA,0xDF, -0xE9,0xDE,0xE7,0x80,0xBE,0x75,0x0F,0x80, -0x75,0x0E,0x7E,0x75,0x0D,0xAA,0x75,0x0C, -0x83,0xE4,0xF5,0x10,0x75,0x0B,0xA0,0x75, -0x0A,0xAC,0x75,0x09,0xB9,0x75,0x08,0x03, -0x75,0x89,0x11,0x7B,0x60,0x7A,0x09,0xF9, -0xF8,0xAF,0x0B,0xAE,0x0A,0xAD,0x09,0xAC, -0x08,0x12,0x02,0xBB,0xAD,0x07,0xAC,0x06, -0xC3,0xE4,0x9D,0xFD,0xE4,0x9C,0xFC,0x78, -0x17,0xF6,0xAF,0x05,0xEF,0x08,0xF6,0x18, -0xE6,0xF5,0x8C,0x08,0xE6,0xF5,0x8A,0x74, -0x0D,0x2D,0xFD,0xE4,0x3C,0x18,0xF6,0xAF, -0x05,0xEF,0x08,0xF6,0x75,0x88,0x10,0x53, -0x8E,0xC7,0xD2,0xA9,0x22,0xC0,0xE0,0xC0, -0xF0,0xC0,0x83,0xC0,0x82,0xC0,0xD0,0x75, -0xD0,0x00,0xC0,0x00,0x78,0x17,0xE6,0xF5, -0x8C,0x78,0x18,0xE6,0xF5,0x8A,0x90,0x06, -0x2B,0xE4,0x75,0xF0,0x01,0x12,0x02,0x69, -0x90,0x06,0x2D,0xE4,0x75,0xF0,0x01,0x12, -0x02,0x69,0xD0,0x00,0xD0,0xD0,0xD0,0x82, -0xD0,0x83,0xD0,0xF0,0xD0,0xE0,0x32,0xC2, -0xAF,0xAD,0x07,0xAC,0x06,0x8C,0xA2,0x8D, -0xA3,0x75,0xA0,0x01,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xAE, -0xA1,0xBE,0x00,0xF0,0xAE,0xA6,0xAF,0xA7, -0xD2,0xAF,0x22,0x90,0x06,0x24,0x12,0x03, -0x5E,0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE, -0xE4,0x3D,0xFD,0xE4,0x3C,0x22,0xE4,0x7F, -0x20,0x7E,0x4E,0xFD,0xFC,0x90,0x06,0x24, -0x12,0x03,0x6A,0xC3,0x02,0x03,0x4D,0xC2, -0xAF,0xAB,0x07,0xAA,0x06,0x8A,0xA2,0x8B, -0xA3,0x8C,0xA4,0x8D,0xA5,0x75,0xA0,0x03, -0x00,0x00,0x00,0xAA,0xA1,0xBA,0x00,0xF8, -0xD2,0xAF,0x22,0x42,0x06,0x2D,0x00,0x00, -0x42,0x06,0x2B,0x00,0x00,0x00,0x12,0x05, -0xDF,0x12,0x04,0xCD,0x02,0x00,0x03,0xE4, -0xF5,0x8E,0x22}; - -static rtk_api_ret_t _rtk_port_FiberModeAbility_set(rtk_port_t port, rtk_port_phy_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check Combo port or not */ - RTK_CHK_PORT_IS_COMBO(port); - - /* Flow Control */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_FIB0_CFG04, ®Data)) != RT_ERR_OK) - return retVal; - - if (pAbility->AsyFC == 1) - regData |= (0x0001 << 8); - else - regData &= ~(0x0001 << 8); - - if (pAbility->FC == 1) - regData |= (0x0001 << 7); - else - regData &= ~(0x0001 << 7); - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_FIB0_CFG04, regData)) != RT_ERR_OK) - return retVal; - - /* Speed ability */ - if( (pAbility->Full_1000 == 1) && (pAbility->Full_100 == 1) && (pAbility->AutoNegotiation == 1) ) - { - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_FRC_MODE_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_MODE_MASK, 7)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_FIB0_CFG00, 0x1140)) != RT_ERR_OK) - return retVal; - } - else if(pAbility->Full_1000 == 1) - { - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_FRC_MODE_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_MODE_MASK, 4)) != RT_ERR_OK) - return retVal; - - if(pAbility->AutoNegotiation == 1) - { - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_FIB0_CFG00, 0x1140)) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_FIB0_CFG00, 0x0140)) != RT_ERR_OK) - return retVal; - } - } - else if(pAbility->Full_100 == 1) - { - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_FRC_MODE_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_MODE_MASK, 5)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_FIB0_CFG00, 0x2100)) != RT_ERR_OK) - return retVal; - } - - /* Digital software reset */ - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0003)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x0080)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_SDS_INDACS_DATA, ®Data)) != RT_ERR_OK) - return retVal; - - regData |= (0x0001 << 6); - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, regData)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0003)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - regData &= ~(0x0001 << 6); - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, regData)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0003)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - /* CDR reset */ - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x1401))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0000))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x1403))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0000))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -static rtk_api_ret_t _rtk_port_FiberModeAbility_get(rtk_port_t port, rtk_port_phy_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 data, regData; - - /* Check Combo port or not */ - RTK_CHK_PORT_IS_COMBO(port); - - memset(pAbility, 0x00, sizeof(rtk_port_phy_ability_t)); - - /* Flow Control */ - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_FRC_REG4_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_FRC_REG4_FIB100_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0044)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x0080)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_SDS_INDACS_DATA, ®Data)) != RT_ERR_OK) - return retVal; - - if(regData & (0x0001 << 8)) - pAbility->AsyFC = 1; - - if(regData & (0x0001 << 7)) - pAbility->FC = 1; - - /* Speed ability */ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_FRC_MODE_OFFSET, &data)) != RT_ERR_OK) - return retVal; - - if(data == 0) - { - pAbility->AutoNegotiation = 1; - pAbility->Full_1000 = 1; - pAbility->Full_100 = 1; - } - else - { - if ((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FIBER_CFG_1, RTL8367C_SDS_MODE_MASK, &data)) != RT_ERR_OK) - return retVal; - - if(data == 4) - { - pAbility->Full_1000 = 1; - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_FIB0_CFG00, &data)) != RT_ERR_OK) - return retVal; - - if(data & 0x1000) - pAbility->AutoNegotiation = 1; - else - pAbility->AutoNegotiation = 0; - } - else if(data == 5) - pAbility->Full_100 = 1; - else - return RT_ERR_FAILED; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyAutoNegoAbility_set - * Description: - * Set ethernet PHY auto-negotiation desired ability. - * Input: - * port - port id. - * pAbility - Ability structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * If Full_1000 bit is set to 1, the AutoNegotiation will be automatic set to 1. While both AutoNegotiation and Full_1000 are set to 0, the PHY speed and duplex selection will - * be set as following 100F > 100H > 10F > 10H priority sequence. - */ -rtk_api_ret_t rtk_port_phyAutoNegoAbility_set(rtk_port_t port, rtk_port_phy_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData; - rtk_uint32 phyEnMsk0; - rtk_uint32 phyEnMsk4; - rtk_uint32 phyEnMsk9; - rtk_port_media_t media_type; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pAbility) - return RT_ERR_NULL_POINTER; - - if (pAbility->Half_10 >= RTK_ENABLE_END || pAbility->Full_10 >= RTK_ENABLE_END || - pAbility->Half_100 >= RTK_ENABLE_END || pAbility->Full_100 >= RTK_ENABLE_END || - pAbility->Full_1000 >= RTK_ENABLE_END || pAbility->AutoNegotiation >= RTK_ENABLE_END || - pAbility->AsyFC >= RTK_ENABLE_END || pAbility->FC >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (rtk_switch_isComboPort(port) == RT_ERR_OK) - { - if ((retVal = rtk_port_phyComboPortMedia_get(port, &media_type)) != RT_ERR_OK) - return retVal; - - if(media_type == PORT_MEDIA_FIBER) - { - return _rtk_port_FiberModeAbility_set(port, pAbility); - } - } - - /*for PHY auto mode setup*/ - pAbility->AutoNegotiation = 1; - - phyEnMsk0 = 0; - phyEnMsk4 = 0; - phyEnMsk9 = 0; - - if (1 == pAbility->Half_10) - { - /*10BASE-TX half duplex capable in reg 4.5*/ - phyEnMsk4 = phyEnMsk4 | (1 << 5); - - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 & (~(1 << 13)); - } - - if (1 == pAbility->Full_10) - { - /*10BASE-TX full duplex capable in reg 4.6*/ - phyEnMsk4 = phyEnMsk4 | (1 << 6); - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 & (~(1 << 13)); - - /*Full duplex mode in reg 0.8*/ - phyEnMsk0 = phyEnMsk0 | (1 << 8); - - } - - if (1 == pAbility->Half_100) - { - /*100BASE-TX half duplex capable in reg 4.7*/ - phyEnMsk4 = phyEnMsk4 | (1 << 7); - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 | (1 << 13); - } - - - if (1 == pAbility->Full_100) - { - /*100BASE-TX full duplex capable in reg 4.8*/ - phyEnMsk4 = phyEnMsk4 | (1 << 8); - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 | (1 << 13); - /*Full duplex mode in reg 0.8*/ - phyEnMsk0 = phyEnMsk0 | (1 << 8); - } - - - if (1 == pAbility->Full_1000) - { - /*1000 BASE-T FULL duplex capable setting in reg 9.9*/ - phyEnMsk9 = phyEnMsk9 | (1 << 9); - - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 | (1 << 6); - phyEnMsk0 = phyEnMsk0 & (~(1 << 13)); - - - /*Auto-Negotiation setting in reg 0.12*/ - phyEnMsk0 = phyEnMsk0 | (1 << 12); - - } - - if (1 == pAbility->AutoNegotiation) - { - /*Auto-Negotiation setting in reg 0.12*/ - phyEnMsk0 = phyEnMsk0 | (1 << 12); - } - - if (1 == pAbility->AsyFC) - { - /*Asymetric flow control in reg 4.11*/ - phyEnMsk4 = phyEnMsk4 | (1 << 11); - } - if (1 == pAbility->FC) - { - /*Flow control in reg 4.10*/ - phyEnMsk4 = phyEnMsk4 | (1 << 10); - } - - /*1000 BASE-T control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_1000_BASET_CONTROL_REG, &phyData)) != RT_ERR_OK) - return retVal; - - phyData = (phyData & (~0x0200)) | phyEnMsk9 ; - - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_1000_BASET_CONTROL_REG, phyData)) != RT_ERR_OK) - return retVal; - - /*Auto-Negotiation control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_AN_ADVERTISEMENT_REG, &phyData)) != RT_ERR_OK) - return retVal; - - phyData = (phyData & (~0x0DE0)) | phyEnMsk4; - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_AN_ADVERTISEMENT_REG, phyData)) != RT_ERR_OK) - return retVal; - - /*Control register setting and restart auto*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, &phyData)) != RT_ERR_OK) - return retVal; - - phyData = (phyData & (~0x3140)) | phyEnMsk0; - /*If have auto-negotiation capable, then restart auto negotiation*/ - if (1 == pAbility->AutoNegotiation) - { - phyData = phyData | (1 << 9); - } - - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, phyData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyAutoNegoAbility_get - * Description: - * Get PHY ability through PHY registers. - * Input: - * port - Port id. - * Output: - * pAbility - Ability structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * Get the capablity of specified PHY. - */ -rtk_api_ret_t rtk_port_phyAutoNegoAbility_get(rtk_port_t port, rtk_port_phy_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData0; - rtk_uint32 phyData4; - rtk_uint32 phyData9; - rtk_port_media_t media_type; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pAbility) - return RT_ERR_NULL_POINTER; - - if (rtk_switch_isComboPort(port) == RT_ERR_OK) - { - if ((retVal = rtk_port_phyComboPortMedia_get(port, &media_type)) != RT_ERR_OK) - return retVal; - - if(media_type == PORT_MEDIA_FIBER) - { - return _rtk_port_FiberModeAbility_get(port, pAbility); - } - } - - /*Control register setting and restart auto*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, &phyData0)) != RT_ERR_OK) - return retVal; - - /*Auto-Negotiation control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_AN_ADVERTISEMENT_REG, &phyData4)) != RT_ERR_OK) - return retVal; - - /*1000 BASE-T control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_1000_BASET_CONTROL_REG, &phyData9)) != RT_ERR_OK) - return retVal; - - if (phyData9 & (1 << 9)) - pAbility->Full_1000 = 1; - else - pAbility->Full_1000 = 0; - - if (phyData4 & (1 << 11)) - pAbility->AsyFC = 1; - else - pAbility->AsyFC = 0; - - if (phyData4 & (1 << 10)) - pAbility->FC = 1; - else - pAbility->FC = 0; - - - if (phyData4 & (1 << 8)) - pAbility->Full_100 = 1; - else - pAbility->Full_100 = 0; - - if (phyData4 & (1 << 7)) - pAbility->Half_100 = 1; - else - pAbility->Half_100 = 0; - - if (phyData4 & (1 << 6)) - pAbility->Full_10 = 1; - else - pAbility->Full_10 = 0; - - if (phyData4 & (1 << 5)) - pAbility->Half_10 = 1; - else - pAbility->Half_10 = 0; - - - if (phyData0 & (1 << 12)) - pAbility->AutoNegotiation = 1; - else - pAbility->AutoNegotiation = 0; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyForceModeAbility_set - * Description: - * Set the port speed/duplex mode/pause/asy_pause in the PHY force mode. - * Input: - * port - port id. - * pAbility - Ability structure - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * While both AutoNegotiation and Full_1000 are set to 0, the PHY speed and duplex selection will - * be set as following 100F > 100H > 10F > 10H priority sequence. - * This API can be used to configure combo port in fiber mode. - * The possible parameters in fiber mode are Full_1000 and Full 100. - * All the other fields in rtk_port_phy_ability_t will be ignored in fiber port. - */ -rtk_api_ret_t rtk_port_phyForceModeAbility_set(rtk_port_t port, rtk_port_phy_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData; - rtk_uint32 phyEnMsk0; - rtk_uint32 phyEnMsk4; - rtk_uint32 phyEnMsk9; - rtk_port_media_t media_type; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pAbility) - return RT_ERR_NULL_POINTER; - - if (pAbility->Half_10 >= RTK_ENABLE_END || pAbility->Full_10 >= RTK_ENABLE_END || - pAbility->Half_100 >= RTK_ENABLE_END || pAbility->Full_100 >= RTK_ENABLE_END || - pAbility->Full_1000 >= RTK_ENABLE_END || pAbility->AutoNegotiation >= RTK_ENABLE_END || - pAbility->AsyFC >= RTK_ENABLE_END || pAbility->FC >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (rtk_switch_isComboPort(port) == RT_ERR_OK) - { - if ((retVal = rtk_port_phyComboPortMedia_get(port, &media_type)) != RT_ERR_OK) - return retVal; - - if(media_type == PORT_MEDIA_FIBER) - { - return _rtk_port_FiberModeAbility_set(port, pAbility); - } - } - - if (1 == pAbility->Full_1000) - return RT_ERR_INPUT; - - /*for PHY force mode setup*/ - pAbility->AutoNegotiation = 0; - - phyEnMsk0 = 0; - phyEnMsk4 = 0; - phyEnMsk9 = 0; - - if (1 == pAbility->Half_10) - { - /*10BASE-TX half duplex capable in reg 4.5*/ - phyEnMsk4 = phyEnMsk4 | (1 << 5); - - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 & (~(1 << 13)); - } - - if (1 == pAbility->Full_10) - { - /*10BASE-TX full duplex capable in reg 4.6*/ - phyEnMsk4 = phyEnMsk4 | (1 << 6); - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 & (~(1 << 13)); - - /*Full duplex mode in reg 0.8*/ - phyEnMsk0 = phyEnMsk0 | (1 << 8); - - } - - if (1 == pAbility->Half_100) - { - /*100BASE-TX half duplex capable in reg 4.7*/ - phyEnMsk4 = phyEnMsk4 | (1 << 7); - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 | (1 << 13); - } - - - if (1 == pAbility->Full_100) - { - /*100BASE-TX full duplex capable in reg 4.8*/ - phyEnMsk4 = phyEnMsk4 | (1 << 8); - /*Speed selection [1:0] */ - /* 11=Reserved*/ - /* 10= 1000Mpbs*/ - /* 01= 100Mpbs*/ - /* 00= 10Mpbs*/ - phyEnMsk0 = phyEnMsk0 & (~(1 << 6)); - phyEnMsk0 = phyEnMsk0 | (1 << 13); - /*Full duplex mode in reg 0.8*/ - phyEnMsk0 = phyEnMsk0 | (1 << 8); - } - - if (1 == pAbility->AsyFC) - { - /*Asymetric flow control in reg 4.11*/ - phyEnMsk4 = phyEnMsk4 | (1 << 11); - } - if (1 == pAbility->FC) - { - /*Flow control in reg 4.10*/ - phyEnMsk4 = phyEnMsk4 | ((1 << 10)); - } - - /*1000 BASE-T control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_1000_BASET_CONTROL_REG, &phyData)) != RT_ERR_OK) - return retVal; - - phyData = (phyData & (~0x0200)) | phyEnMsk9 ; - - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_1000_BASET_CONTROL_REG, phyData)) != RT_ERR_OK) - return retVal; - - /*Auto-Negotiation control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_AN_ADVERTISEMENT_REG, &phyData)) != RT_ERR_OK) - return retVal; - - phyData = (phyData & (~0x0DE0)) | phyEnMsk4; - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_AN_ADVERTISEMENT_REG, phyData)) != RT_ERR_OK) - return retVal; - - /*Control register setting and power off/on*/ - phyData = phyEnMsk0 & (~(1 << 12)); - phyData |= (1 << 11); /* power down PHY, bit 11 should be set to 1 */ - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, phyData)) != RT_ERR_OK) - return retVal; - - phyData = phyData & (~(1 << 11)); /* power on PHY, bit 11 should be set to 0*/ - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, phyData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyForceModeAbility_get - * Description: - * Get PHY ability through PHY registers. - * Input: - * port - Port id. - * Output: - * pAbility - Ability structure - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * Get the capablity of specified PHY. - */ -rtk_api_ret_t rtk_port_phyForceModeAbility_get(rtk_port_t port, rtk_port_phy_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData0; - rtk_uint32 phyData4; - rtk_uint32 phyData9; - rtk_port_media_t media_type; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pAbility) - return RT_ERR_NULL_POINTER; - - if (rtk_switch_isComboPort(port) == RT_ERR_OK) - { - if ((retVal = rtk_port_phyComboPortMedia_get(port, &media_type)) != RT_ERR_OK) - return retVal; - - if(media_type == PORT_MEDIA_FIBER) - { - return _rtk_port_FiberModeAbility_get(port, pAbility); - } - } - - /*Control register setting and restart auto*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, &phyData0)) != RT_ERR_OK) - return retVal; - - /*Auto-Negotiation control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_AN_ADVERTISEMENT_REG, &phyData4)) != RT_ERR_OK) - return retVal; - - /*1000 BASE-T control register setting*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_1000_BASET_CONTROL_REG, &phyData9)) != RT_ERR_OK) - return retVal; - - if (phyData9 & (1 << 9)) - pAbility->Full_1000 = 1; - else - pAbility->Full_1000 = 0; - - if (phyData4 & (1 << 11)) - pAbility->AsyFC = 1; - else - pAbility->AsyFC = 0; - - if (phyData4 & ((1 << 10))) - pAbility->FC = 1; - else - pAbility->FC = 0; - - - if (phyData4 & (1 << 8)) - pAbility->Full_100 = 1; - else - pAbility->Full_100 = 0; - - if (phyData4 & (1 << 7)) - pAbility->Half_100 = 1; - else - pAbility->Half_100 = 0; - - if (phyData4 & (1 << 6)) - pAbility->Full_10 = 1; - else - pAbility->Full_10 = 0; - - if (phyData4 & (1 << 5)) - pAbility->Half_10 = 1; - else - pAbility->Half_10 = 0; - - - if (phyData0 & (1 << 12)) - pAbility->AutoNegotiation = 1; - else - pAbility->AutoNegotiation = 0; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyStatus_get - * Description: - * Get ethernet PHY linking status - * Input: - * port - Port id. - * Output: - * linkStatus - PHY link status - * speed - PHY link speed - * duplex - PHY duplex mode - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * API will return auto negotiation status of phy. - */ -rtk_api_ret_t rtk_port_phyStatus_get(rtk_port_t port, rtk_port_linkStatus_t *pLinkStatus, rtk_port_speed_t *pSpeed, rtk_port_duplex_t *pDuplex) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if( (NULL == pLinkStatus) || (NULL == pSpeed) || (NULL == pDuplex) ) - return RT_ERR_NULL_POINTER; - - /*Get PHY resolved register*/ - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_RESOLVED_REG, &phyData)) != RT_ERR_OK) - return retVal; - - /*check link status*/ - if (phyData & (1<<2)) - { - *pLinkStatus = 1; - - /*check link speed*/ - *pSpeed = (phyData&0x0030) >> 4; - - /*check link duplex*/ - *pDuplex = (phyData&0x0008) >> 3; - } - else - { - *pLinkStatus = 0; - *pSpeed = 0; - *pDuplex = 0; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_macForceLink_set - * Description: - * Set port force linking configuration. - * Input: - * port - port id. - * pPortability - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can set Port/MAC force mode properties. - */ -rtk_api_ret_t rtk_port_macForceLink_set(rtk_port_t port, rtk_port_mac_ability_t *pPortability) -{ - rtk_api_ret_t retVal; - rtl8367c_port_ability_t ability; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pPortability) - return RT_ERR_NULL_POINTER; - - if (pPortability->forcemode >1|| pPortability->speed > 2 || pPortability->duplex > 1 || - pPortability->link > 1 || pPortability->nway > 1 || pPortability->txpause > 1 || pPortability->rxpause > 1) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicPortForceLink(rtk_switch_port_L2P_get(port), &ability)) != RT_ERR_OK) - return retVal; - - ability.forcemode = pPortability->forcemode; - ability.speed = pPortability->speed; - ability.duplex = pPortability->duplex; - ability.link = pPortability->link; - ability.nway = pPortability->nway; - ability.txpause = pPortability->txpause; - ability.rxpause = pPortability->rxpause; - - if ((retVal = rtl8367c_setAsicPortForceLink(rtk_switch_port_L2P_get(port), &ability)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_macForceLink_get - * Description: - * Get port force linking configuration. - * Input: - * port - Port id. - * Output: - * pPortability - port ability configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get Port/MAC force mode properties. - */ -rtk_api_ret_t rtk_port_macForceLink_get(rtk_port_t port, rtk_port_mac_ability_t *pPortability) -{ - rtk_api_ret_t retVal; - rtl8367c_port_ability_t ability; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pPortability) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortForceLink(rtk_switch_port_L2P_get(port), &ability)) != RT_ERR_OK) - return retVal; - - pPortability->forcemode = ability.forcemode; - pPortability->speed = ability.speed; - pPortability->duplex = ability.duplex; - pPortability->link = ability.link; - pPortability->nway = ability.nway; - pPortability->txpause = ability.txpause; - pPortability->rxpause = ability.rxpause; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_macForceLinkExt_set - * Description: - * Set external interface force linking configuration. - * Input: - * port - external port ID - * mode - external interface mode - * pPortability - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set external interface force mode properties. - * The external interface can be set to: - * - MODE_EXT_DISABLE, - * - MODE_EXT_RGMII, - * - MODE_EXT_MII_MAC, - * - MODE_EXT_MII_PHY, - * - MODE_EXT_TMII_MAC, - * - MODE_EXT_TMII_PHY, - * - MODE_EXT_GMII, - * - MODE_EXT_RMII_MAC, - * - MODE_EXT_RMII_PHY, - * - MODE_EXT_SGMII, - * - MODE_EXT_HSGMII, - * - MODE_EXT_1000X_100FX, - * - MODE_EXT_1000X, - * - MODE_EXT_100FX, - */ -rtk_api_ret_t rtk_port_macForceLinkExt_set(rtk_port_t port, rtk_mode_ext_t mode, rtk_port_mac_ability_t *pPortability) -{ - rtk_api_ret_t retVal; - rtl8367c_port_ability_t ability; - rtk_uint32 ext_id; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_EXT(port); - - if(NULL == pPortability) - return RT_ERR_NULL_POINTER; - - if (mode >=MODE_EXT_END) - return RT_ERR_INPUT; - - if(mode == MODE_EXT_HSGMII) - { - if (pPortability->forcemode > 1 || pPortability->speed != PORT_SPEED_2500M || pPortability->duplex != PORT_FULL_DUPLEX || - pPortability->link >= PORT_LINKSTATUS_END || pPortability->nway > 1 || pPortability->txpause > 1 || pPortability->rxpause > 1) - return RT_ERR_INPUT; - - if(rtk_switch_isHsgPort(port) != RT_ERR_OK) - return RT_ERR_PORT_ID; - } - else - { - if (pPortability->forcemode > 1 || pPortability->speed > PORT_SPEED_1000M || pPortability->duplex >= PORT_DUPLEX_END || - pPortability->link >= PORT_LINKSTATUS_END || pPortability->nway > 1 || pPortability->txpause > 1 || pPortability->rxpause > 1) - return RT_ERR_INPUT; - } - - ext_id = port - 15; - - if(mode == MODE_EXT_DISABLE) - { - memset(&ability, 0x00, sizeof(rtl8367c_port_ability_t)); - if ((retVal = rtl8367c_setAsicPortForceLinkExt(ext_id, &ability)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPortExtMode(ext_id, mode)) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtl8367c_setAsicPortExtMode(ext_id, mode)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortForceLinkExt(ext_id, &ability)) != RT_ERR_OK) - return retVal; - - ability.forcemode = pPortability->forcemode; - ability.speed = (mode == MODE_EXT_HSGMII) ? PORT_SPEED_1000M : pPortability->speed; - ability.duplex = pPortability->duplex; - ability.link = pPortability->link; - ability.nway = pPortability->nway; - ability.txpause = pPortability->txpause; - ability.rxpause = pPortability->rxpause; - - if ((retVal = rtl8367c_setAsicPortForceLinkExt(ext_id, &ability)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_macForceLinkExt_get - * Description: - * Set external interface force linking configuration. - * Input: - * port - external port ID - * Output: - * pMode - external interface mode - * pPortability - port ability configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get external interface force mode properties. - */ -rtk_api_ret_t rtk_port_macForceLinkExt_get(rtk_port_t port, rtk_mode_ext_t *pMode, rtk_port_mac_ability_t *pPortability) -{ - rtk_api_ret_t retVal; - rtl8367c_port_ability_t ability; - rtk_uint32 ext_id; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_EXT(port); - - if(NULL == pMode) - return RT_ERR_NULL_POINTER; - - if(NULL == pPortability) - return RT_ERR_NULL_POINTER; - - ext_id = port - 15; - - if ((retVal = rtl8367c_getAsicPortExtMode(ext_id, (rtk_uint32 *)pMode)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortForceLinkExt(ext_id, &ability)) != RT_ERR_OK) - return retVal; - - pPortability->forcemode = ability.forcemode; - pPortability->speed = (*pMode == MODE_EXT_HSGMII) ? PORT_SPEED_2500M : ability.speed; - pPortability->duplex = ability.duplex; - pPortability->link = ability.link; - pPortability->nway = ability.nway; - pPortability->txpause = ability.txpause; - pPortability->rxpause = ability.rxpause; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_port_macStatus_get - * Description: - * Get port link status. - * Input: - * port - Port id. - * Output: - * pPortstatus - port ability configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get Port/PHY properties. - */ -rtk_api_ret_t rtk_port_macStatus_get(rtk_port_t port, rtk_port_mac_ability_t *pPortstatus) -{ - rtk_api_ret_t retVal; - rtl8367c_port_status_t status; - rtk_uint32 hsgsel; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pPortstatus) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortStatus(rtk_switch_port_L2P_get(port), &status)) != RT_ERR_OK) - return retVal; - - - pPortstatus->duplex = status.duplex; - pPortstatus->link = status.link; - pPortstatus->nway = status.nway; - pPortstatus->txpause = status.txpause; - pPortstatus->rxpause = status.rxpause; - - if( (retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET, &hsgsel)) != RT_ERR_OK) - return retVal; - - if( (rtk_switch_isHsgPort(port) == RT_ERR_OK) && (hsgsel == 1) ) - pPortstatus->speed = PORT_SPEED_2500M; - else - pPortstatus->speed = status.speed; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_macLocalLoopbackEnable_set - * Description: - * Set Port Local Loopback. (Redirect TX to RX.) - * Input: - * port - Port id. - * enable - Loopback state, 0:disable, 1:enable - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can enable/disable Local loopback in MAC. - * For UTP port, This API will also enable the digital - * loopback bit in PHY register for sync of speed between - * PHY and MAC. For EXT port, users need to force the - * link state by themself. - */ -rtk_api_ret_t rtk_port_macLocalLoopbackEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortLoopback(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - if(rtk_switch_isUtpPort(port) == RT_ERR_OK) - { - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, &data)) != RT_ERR_OK) - return retVal; - - if(enable == ENABLED) - data |= (0x0001 << 14); - else - data &= ~(0x0001 << 14); - - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), PHY_CONTROL_REG, data)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_macLocalLoopbackEnable_get - * Description: - * Get Port Local Loopback. (Redirect TX to RX.) - * Input: - * port - Port id. - * Output: - * pEnable - Loopback state, 0:disable, 1:enable - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -rtk_api_ret_t rtk_port_macLocalLoopbackEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortLoopback(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyReg_set - * Description: - * Set PHY register data of the specific port. - * Input: - * port - port id. - * reg - Register id - * regData - Register data - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * This API can set PHY register data of the specific port. - */ -rtk_api_ret_t rtk_port_phyReg_set(rtk_port_t port, rtk_port_phy_reg_t reg, rtk_port_phy_data_t regData) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), reg, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyReg_get - * Description: - * Get PHY register data of the specific port. - * Input: - * port - Port id. - * reg - Register id - * Output: - * pData - Register data - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PHY_REG_ID - Invalid PHY address - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * This API can get PHY register data of the specific port. - */ -rtk_api_ret_t rtk_port_phyReg_get(rtk_port_t port, rtk_port_phy_reg_t reg, rtk_port_phy_data_t *pData) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), reg, pData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_backpressureEnable_set - * Description: - * Set the half duplex backpressure enable status of the specific port. - * Input: - * port - port id. - * enable - Back pressure status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set the half duplex backpressure enable status of the specific port. - * The half duplex backpressure enable status of the port is as following: - * - DISABLE(Defer) - * - ENABLE (Backpressure) - */ -rtk_api_ret_t rtk_port_backpressureEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortJamMode(!enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_backpressureEnable_get - * Description: - * Get the half duplex backpressure enable status of the specific port. - * Input: - * port - Port id. - * Output: - * pEnable - Back pressure status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get the half duplex backpressure enable status of the specific port. - * The half duplex backpressure enable status of the port is as following: - * - DISABLE(Defer) - * - ENABLE (Backpressure) - */ -rtk_api_ret_t rtk_port_backpressureEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortJamMode(®Data)) != RT_ERR_OK) - return retVal; - - *pEnable = !regData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_adminEnable_set - * Description: - * Set port admin configuration of the specific port. - * Input: - * port - port id. - * enable - Back pressure status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set port admin configuration of the specific port. - * The port admin configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -rtk_api_ret_t rtk_port_adminEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtk_port_phyReg_get(port, PHY_CONTROL_REG, &data)) != RT_ERR_OK) - return retVal; - - if (ENABLED == enable) - { - data &= 0xF7FF; - data |= 0x0200; - } - else if (DISABLED == enable) - { - data |= 0x0800; - } - - if ((retVal = rtk_port_phyReg_set(port, PHY_CONTROL_REG, data)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_adminEnable_get - * Description: - * Get port admin configurationof the specific port. - * Input: - * port - Port id. - * Output: - * pEnable - Back pressure status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get port admin configuration of the specific port. - * The port admin configuration of the port is as following: - * - DISABLE - * - ENABLE - */ -rtk_api_ret_t rtk_port_adminEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtk_port_phyReg_get(port, PHY_CONTROL_REG, &data)) != RT_ERR_OK) - return retVal; - - if ( (data & 0x0800) == 0x0800) - { - *pEnable = DISABLED; - } - else - { - *pEnable = ENABLED; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_isolation_set - * Description: - * Set permitted port isolation portmask - * Input: - * port - port id. - * pPortmask - Permit port mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * This API set the port mask that a port can trasmit packet to of each port - * A port can only transmit packet to ports included in permitted portmask - */ -rtk_api_ret_t rtk_port_isolation_set(rtk_port_t port, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - /* check port mask */ - RTK_CHK_PORTMASK_VALID(pPortmask); - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPortIsolationPermittedPortmask(rtk_switch_port_L2P_get(port), pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_isolation_get - * Description: - * Get permitted port isolation portmask - * Input: - * port - Port id. - * Output: - * pPortmask - Permit port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API get the port mask that a port can trasmit packet to of each port - * A port can only transmit packet to ports included in permitted portmask - */ -rtk_api_ret_t rtk_port_isolation_get(rtk_port_t port, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortIsolationPermittedPortmask(rtk_switch_port_L2P_get(port), &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_rgmiiDelayExt_set - * Description: - * Set RGMII interface delay value for TX and RX. - * Input: - * txDelay - TX delay value, 1 for delay 2ns and 0 for no-delay - * rxDelay - RX delay value, 0~7 for delay setup. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set external interface 2 RGMII delay. - * In TX delay, there are 2 selection: no-delay and 2ns delay. - * In RX dekay, there are 8 steps for delay tunning. 0 for no-delay, and 7 for maximum delay. - */ -rtk_api_ret_t rtk_port_rgmiiDelayExt_set(rtk_port_t port, rtk_data_t txDelay, rtk_data_t rxDelay) -{ - rtk_api_ret_t retVal; - rtk_uint32 regAddr, regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_EXT(port); - - if ((txDelay > 1) || (rxDelay > 7)) - return RT_ERR_INPUT; - - if(port == EXT_PORT0) - regAddr = RTL8367C_REG_EXT1_RGMXF; - else if(port == EXT_PORT1) - regAddr = RTL8367C_REG_EXT2_RGMXF; - else - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicReg(regAddr, ®Data)) != RT_ERR_OK) - return retVal; - - regData = (regData & 0xFFF0) | ((txDelay << 3) & 0x0008) | (rxDelay & 0x0007); - - if ((retVal = rtl8367c_setAsicReg(regAddr, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_rgmiiDelayExt_get - * Description: - * Get RGMII interface delay value for TX and RX. - * Input: - * None - * Output: - * pTxDelay - TX delay value - * pRxDelay - RX delay value - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set external interface 2 RGMII delay. - * In TX delay, there are 2 selection: no-delay and 2ns delay. - * In RX dekay, there are 8 steps for delay tunning. 0 for n0-delay, and 7 for maximum delay. - */ -rtk_api_ret_t rtk_port_rgmiiDelayExt_get(rtk_port_t port, rtk_data_t *pTxDelay, rtk_data_t *pRxDelay) -{ - rtk_api_ret_t retVal; - rtk_uint32 regAddr, regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_EXT(port); - - if( (NULL == pTxDelay) || (NULL == pRxDelay) ) - return RT_ERR_NULL_POINTER; - - if(port == EXT_PORT0) - regAddr = RTL8367C_REG_EXT1_RGMXF; - else if(port == EXT_PORT1) - regAddr = RTL8367C_REG_EXT2_RGMXF; - else - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicReg(regAddr, ®Data)) != RT_ERR_OK) - return retVal; - - *pTxDelay = (regData & 0x0008) >> 3; - *pRxDelay = regData & 0x0007; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyEnableAll_set - * Description: - * Set all PHY enable status. - * Input: - * enable - PHY Enable State. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set all PHY status. - * The configuration of all PHY is as following: - * - DISABLE - * - ENABLE - */ -rtk_api_ret_t rtk_port_phyEnableAll_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 data; - rtk_uint32 port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortEnableAll(enable)) != RT_ERR_OK) - return retVal; - - RTK_SCAN_ALL_LOG_PORT(port) - { - if(rtk_switch_isUtpPort(port) == RT_ERR_OK) - { - if ((retVal = rtk_port_phyReg_get(port, PHY_CONTROL_REG, &data)) != RT_ERR_OK) - return retVal; - - if (ENABLED == enable) - { - data &= 0xF7FF; - data |= 0x0200; - } - else - { - data |= 0x0800; - } - - if ((retVal = rtk_port_phyReg_set(port, PHY_CONTROL_REG, data)) != RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_port_phyEnableAll_get - * Description: - * Get all PHY enable status. - * Input: - * None - * Output: - * pEnable - PHY Enable State. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API can set all PHY status. - * The configuration of all PHY is as following: - * - DISABLE - * - ENABLE - */ -rtk_api_ret_t rtk_port_phyEnableAll_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortEnableAll(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_efid_set - * Description: - * Set port-based enhanced filtering database - * Input: - * port - Port id. - * efid - Specified enhanced filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_FID - Invalid fid. - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can set port-based enhanced filtering database. - */ -rtk_api_ret_t rtk_port_efid_set(rtk_port_t port, rtk_data_t efid) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /* efid must be 0~7 */ - if (efid > RTK_EFID_MAX) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortIsolationEfid(rtk_switch_port_L2P_get(port), efid))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_efid_get - * Description: - * Get port-based enhanced filtering database - * Input: - * port - Port id. - * Output: - * pEfid - Specified enhanced filtering database. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can get port-based enhanced filtering database status. - */ -rtk_api_ret_t rtk_port_efid_get(rtk_port_t port, rtk_data_t *pEfid) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEfid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortIsolationEfid(rtk_switch_port_L2P_get(port), pEfid))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyComboPortMedia_set - * Description: - * Set Combo port media type - * Input: - * port - Port id. - * media - Media (COPPER or FIBER) - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can Set Combo port media type. - */ -rtk_api_ret_t rtk_port_phyComboPortMedia_set(rtk_port_t port, rtk_port_media_t media) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - rtk_uint32 idx; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - /* Check Combo Port ID */ - RTK_CHK_PORT_IS_COMBO(port); - - if (media >= PORT_MEDIA_END) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - if(regData != 0x6367) - return RT_ERR_CHIP_NOT_SUPPORTED; - - if(media == PORT_MEDIA_FIBER) - { - /* software init */ - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_CHIP_RESET, RTL8367C_DW8051_RST_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MISCELLANEOUS_CONFIGURE0, RTL8367C_DW8051_EN_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_ACS_IROM_ENABLE_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_IROM_MSB_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - for(idx = 0; idx < FIBER_INIT_SIZE; idx++) - { - if ((retVal = rtl8367c_setAsicReg(0xE000 + idx, (rtk_uint32)Fiber[idx])) != RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_IROM_MSB_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_ACS_IROM_ENABLE_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_CHIP_RESET, RTL8367C_DW8051_RST_OFFSET, 0)) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_UTP_FIB_DET, RTL8367C_UTP_FIRST_OFFSET, 1))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_DW8051_READY_OFFSET, 0)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_phyComboPortMedia_get - * Description: - * Get Combo port media type - * Input: - * port - Port id. - * Output: - * pMedia - Media (COPPER or FIBER) - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can Set Combo port media type. - */ -rtk_api_ret_t rtk_port_phyComboPortMedia_get(rtk_port_t port, rtk_port_media_t *pMedia) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - rtk_uint32 data; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - /* Check Combo Port ID */ - RTK_CHK_PORT_IS_COMBO(port); - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - if(regData != 0x6367) - { - *pMedia = PORT_MEDIA_COPPER; - } - else - { - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_UTP_FIB_DET, RTL8367C_UTP_FIRST_OFFSET, &data))!=RT_ERR_OK) - return retVal; - - if(data == 1) - *pMedia = PORT_MEDIA_COPPER; - else - *pMedia = PORT_MEDIA_FIBER; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_rtctEnable_set - * Description: - * Enable RTCT test - * Input: - * pPortmask - Port mask of RTCT enabled port - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * The API can enable RTCT Test - */ -rtk_api_ret_t rtk_port_rtctEnable_set(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Mask Valid */ - RTK_CHK_PORTMASK_VALID_ONLY_UTP(pPortmask); - - if ((retVal = rtl8367c_setAsicPortRTCTEnable(pPortmask->bits[0]))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_rtctDisable_set - * Description: - * Disable RTCT test - * Input: - * pPortmask - Port mask of RTCT disabled port - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask. - * Note: - * The API can disable RTCT Test - */ -rtk_api_ret_t rtk_port_rtctDisable_set(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Mask Valid */ - RTK_CHK_PORTMASK_VALID_ONLY_UTP(pPortmask); - - if ((retVal = rtl8367c_setAsicPortRTCTDisable(pPortmask->bits[0]))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_port_rtctResult_get - * Description: - * Get the result of RTCT test - * Input: - * port - Port ID - * Output: - * pRtctResult - The result of RTCT result - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_PHY_RTCT_NOT_FINISH - Testing does not finish. - * Note: - * The API can get RTCT test result. - * RTCT test may takes 4.8 seconds to finish its test at most. - * Thus, if this API return RT_ERR_PHY_RTCT_NOT_FINISH or - * other error code, the result can not be referenced and - * user should call this API again until this API returns - * a RT_ERR_OK. - * The result is stored at pRtctResult->ge_result - * pRtctResult->linkType is unused. - * The unit of channel length is 2.5cm. Ex. 300 means 300 * 2.5 = 750cm = 7.5M - */ -rtk_api_ret_t rtk_port_rtctResult_get(rtk_port_t port, rtk_rtctResult_t *pRtctResult) -{ - rtk_api_ret_t retVal; - rtl8367c_port_rtct_result_t result; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_IS_UTP(port); - - memset(pRtctResult, 0x00, sizeof(rtk_rtctResult_t)); - if ((retVal = rtl8367c_getAsicPortRTCTResult(port, &result))!=RT_ERR_OK) - return retVal; - - pRtctResult->result.ge_result.channelALen = result.channelALen; - pRtctResult->result.ge_result.channelBLen = result.channelBLen; - pRtctResult->result.ge_result.channelCLen = result.channelCLen; - pRtctResult->result.ge_result.channelDLen = result.channelDLen; - - pRtctResult->result.ge_result.channelALinedriver = result.channelALinedriver; - pRtctResult->result.ge_result.channelBLinedriver = result.channelBLinedriver; - pRtctResult->result.ge_result.channelCLinedriver = result.channelCLinedriver; - pRtctResult->result.ge_result.channelDLinedriver = result.channelDLinedriver; - - pRtctResult->result.ge_result.channelAMismatch = result.channelAMismatch; - pRtctResult->result.ge_result.channelBMismatch = result.channelBMismatch; - pRtctResult->result.ge_result.channelCMismatch = result.channelCMismatch; - pRtctResult->result.ge_result.channelDMismatch = result.channelDMismatch; - - pRtctResult->result.ge_result.channelAOpen = result.channelAOpen; - pRtctResult->result.ge_result.channelBOpen = result.channelBOpen; - pRtctResult->result.ge_result.channelCOpen = result.channelCOpen; - pRtctResult->result.ge_result.channelDOpen = result.channelDOpen; - - pRtctResult->result.ge_result.channelAShort = result.channelAShort; - pRtctResult->result.ge_result.channelBShort = result.channelBShort; - pRtctResult->result.ge_result.channelCShort = result.channelCShort; - pRtctResult->result.ge_result.channelDShort = result.channelDShort; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_port_sds_reset - * Description: - * Reset Serdes - * Input: - * port - Port ID - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can reset Serdes - */ -rtk_api_ret_t rtk_port_sds_reset(rtk_port_t port) -{ - rtk_uint32 ext_id; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - if(rtk_switch_isSgmiiPort(port) != RT_ERR_OK) - return RT_ERR_PORT_ID; - - ext_id = port - 15; - return rtl8367c_sdsReset(ext_id); -} - -/* Function Name: - * rtk_port_sgmiiLinkStatus_get - * Description: - * Get SGMII status - * Input: - * port - Port ID - * Output: - * pSignalDetect - Signal detect - * pSync - Sync - * pLink - Link - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can reset Serdes - */ -rtk_api_ret_t rtk_port_sgmiiLinkStatus_get(rtk_port_t port, rtk_data_t *pSignalDetect, rtk_data_t *pSync, rtk_port_linkStatus_t *pLink) -{ - rtk_uint32 ext_id; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - if(rtk_switch_isSgmiiPort(port) != RT_ERR_OK) - return RT_ERR_PORT_ID; - - if(NULL == pSignalDetect) - return RT_ERR_NULL_POINTER; - - if(NULL == pSync) - return RT_ERR_NULL_POINTER; - - if(NULL == pLink) - return RT_ERR_NULL_POINTER; - - ext_id = port - 15; - return rtl8367c_getSdsLinkStatus(ext_id, (rtk_uint32 *)pSignalDetect, (rtk_uint32 *)pSync, (rtk_uint32 *)pLink); -} - -/* Function Name: - * rtk_port_sgmiiNway_set - * Description: - * Configure SGMII/HSGMII port Nway state - * Input: - * port - Port ID - * state - Nway state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API configure SGMII/HSGMII port Nway state - */ -rtk_api_ret_t rtk_port_sgmiiNway_set(rtk_port_t port, rtk_enable_t state) -{ - rtk_uint32 ext_id; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - if(rtk_switch_isSgmiiPort(port) != RT_ERR_OK) - return RT_ERR_PORT_ID; - - if(state >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - ext_id = port - 15; - return rtl8367c_setSgmiiNway(ext_id, (rtk_uint32)state); -} - -/* Function Name: - * rtk_port_sgmiiNway_get - * Description: - * Get SGMII/HSGMII port Nway state - * Input: - * port - Port ID - * Output: - * pState - Nway state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can get SGMII/HSGMII port Nway state - */ -rtk_api_ret_t rtk_port_sgmiiNway_get(rtk_port_t port, rtk_enable_t *pState) -{ - rtk_uint32 ext_id; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - if(rtk_switch_isSgmiiPort(port) != RT_ERR_OK) - return RT_ERR_PORT_ID; - - if(NULL == pState) - return RT_ERR_NULL_POINTER; - - ext_id = port - 15; - return rtl8367c_getSgmiiNway(ext_id, (rtk_uint32 *)pState); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/ptp.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/ptp.c deleted file mode 100644 index 40962a0e69..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/ptp.c +++ /dev/null @@ -1,759 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 39583 $ - * $Date: 2013-05-20 16:59:23 +0800 (星期一, 20 五月 2013) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in time module. - * - */ - -#include -#include -#include -#include - -#include -#include - -/* Function Name: - * rtk_ptp_init - * Description: - * PTP function initialization. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is used to initialize PTP status. - */ -rtk_api_ret_t rtk_ptp_init(void) -{ - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_mac_set - * Description: - * Configure PTP mac address. - * Input: - * mac - mac address to parser PTP packets. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_mac_set(rtk_mac_t mac) -{ - rtk_api_ret_t retVal; - ether_addr_t sw_mac; - - memcpy(sw_mac.octet, mac.octet, ETHER_ADDR_LEN); - - if((retVal=rtl8367c_setAsicEavMacAddress(sw_mac))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_mac_get - * Description: - * Get PTP mac address. - * Input: - * None - * Output: - * pMac - mac address to parser PTP packets. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_mac_get(rtk_mac_t *pMac) -{ - rtk_api_ret_t retVal; - ether_addr_t sw_mac; - - if((retVal=rtl8367c_getAsicEavMacAddress(&sw_mac))!=RT_ERR_OK) - return retVal; - - memcpy(pMac->octet, sw_mac.octet, ETHER_ADDR_LEN); - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_tpid_set - * Description: - * Configure PTP accepted outer & inner tag TPID. - * Input: - * outerId - Ether type of S-tag frame parsing in PTP ports. - * innerId - Ether type of C-tag frame parsing in PTP ports. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_tpid_set(rtk_ptp_tpid_t outerId, rtk_ptp_tpid_t innerId) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((outerId>RTK_MAX_NUM_OF_TPID) ||(innerId>RTK_MAX_NUM_OF_TPID)) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicEavTpid(outerId, innerId)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_tpid_get - * Description: - * Get PTP accepted outer & inner tag TPID. - * Input: - * None - * Output: - * pOuterId - Ether type of S-tag frame parsing in PTP ports. - * pInnerId - Ether type of C-tag frame parsing in PTP ports. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_tpid_get(rtk_ptp_tpid_t *pOuterId, rtk_ptp_tpid_t *pInnerId) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicEavTpid(pOuterId, pInnerId)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_refTime_set - * Description: - * Set the reference time of the specified device. - * Input: - * timeStamp - reference timestamp value - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - invalid input parameter - * Applicable: - * 8390, 8380 - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_refTime_set(rtk_ptp_timeStamp_t timeStamp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (timeStamp.nsec > RTK_MAX_NUM_OF_NANO_SECOND) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicEavSysTime(timeStamp.sec, timeStamp.nsec))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_refTime_get - * Description: - * Get the reference time of the specified device. - * Input: - * Output: - * pTimeStamp - pointer buffer of the reference time - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Applicable: - * 8390, 8380 - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_refTime_get(rtk_ptp_timeStamp_t *pTimeStamp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicEavSysTime(&pTimeStamp->sec, &pTimeStamp->nsec))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_refTimeAdjust_set - * Description: - * Adjust the reference time. - * Input: - * unit - unit id - * sign - significant - * timeStamp - reference timestamp value - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * sign=0 for positive adjustment, sign=1 for negative adjustment. - */ -rtk_api_ret_t rtk_ptp_refTimeAdjust_set(rtk_ptp_sys_adjust_t sign, rtk_ptp_timeStamp_t timeStamp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (timeStamp.nsec > RTK_MAX_NUM_OF_NANO_SECOND) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicEavSysTimeAdjust(sign, timeStamp.sec, timeStamp.nsec))!=RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_refTimeEnable_set - * Description: - * Set the enable state of reference time of the specified device. - * Input: - * enable - status - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_refTimeEnable_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicEavSysTimeCtrl(enable))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_refTimeEnable_get - * Description: - * Get the enable state of reference time of the specified device. - * Input: - * Output: - * pEnable - status - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Applicable: - * 8390, 8380 - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_refTimeEnable_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicEavSysTimeCtrl(pEnable))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_portEnable_set - * Description: - * Set PTP status of the specified port. - * Input: - * port - port id - * enable - status - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_portEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port is PTP port */ - RTK_CHK_PORT_IS_PTP(port); - - if (enable>=RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicEavPortEnable(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_portEnable_get - * Description: - * Get PTP status of the specified port. - * Input: - * port - port id - * Output: - * pEnable - status - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_portEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port is PTP port */ - RTK_CHK_PORT_IS_PTP(port); - - if ((retVal = rtl8367c_getAsicEavPortEnable(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_ptp_portTimestamp_get - * Description: - * Get PTP timstamp according to the PTP identifier on the dedicated port from the specified device. - * Input: - * unit - unit id - * port - port id - * type - PTP message type - * Output: - * pInfo - pointer buffer of sequence ID and timestamp - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Applicable: - * 8390, 8380 - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_portTimestamp_get( rtk_port_t port, rtk_ptp_msgType_t type, rtk_ptp_info_t *pInfo) -{ - rtk_api_ret_t retVal; - rtl8367c_ptp_time_stamp_t time; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port is PTP port */ - RTK_CHK_PORT_IS_PTP(port); - - if ((retVal = rtl8367c_getAsicEavPortTimeStamp(rtk_switch_port_L2P_get(port), type, &time)) != RT_ERR_OK) - return retVal; - - pInfo->sequenceId = time.sequence_id; - pInfo->timeStamp.sec = time.second; - pInfo->timeStamp.nsec = time.nano_second; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_intControl_set - * Description: - * Set PTP interrupt trigger status configuration. - * Input: - * type - Interrupt type. - * enable - Interrupt status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The API can set PTP interrupt status configuration. - * The interrupt trigger status is shown in the following: - * PTP_INT_TYPE_TX_SYNC = 0, - * PTP_INT_TYPE_TX_DELAY_REQ, - * PTP_INT_TYPE_TX_PDELAY_REQ, - * PTP_INT_TYPE_TX_PDELAY_RESP, - * PTP_INT_TYPE_RX_SYNC, - * PTP_INT_TYPE_RX_DELAY_REQ, - * PTP_INT_TYPE_RX_PDELAY_REQ, - * PTP_INT_TYPE_RX_PDELAY_RESP, - * PTP_INT_TYPE_ALL, - */ -rtk_api_ret_t rtk_ptp_intControl_set(rtk_ptp_intType_t type, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 mask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type>=PTP_INT_TYPE_END) - return RT_ERR_INPUT; - - if (PTP_INT_TYPE_ALL!=type) - { - if ((retVal = rtl8367c_getAsicEavInterruptMask(&mask)) != RT_ERR_OK) - return retVal; - - if (ENABLED == enable) - mask = mask | (1<=PTP_INT_TYPE_ALL) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicEavInterruptMask(&mask)) != RT_ERR_OK) - return retVal; - - if (0 == (mask&(1<=RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicEavTrap(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_ptp_portPtpEnable_get - * Description: - * Get PTP packet trap of the specified port. - * Input: - * port - port id - * Output: - * pEnable - status - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT - invalid port id - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -rtk_api_ret_t rtk_ptp_portTrap_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicEavTrap(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/qos.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/qos.c deleted file mode 100644 index 70067a3016..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/qos.c +++ /dev/null @@ -1,1452 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in QoS module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Function Name: - * rtk_qos_init - * Description: - * Configure Qos default settings with queue number assigment to each port. - * Input: - * queueNum - Queue number of each port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QUEUE_NUM - Invalid queue number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API will initialize related Qos setting with queue number assigment. - * The queue number is from 1 to 8. - */ -rtk_api_ret_t rtk_qos_init(rtk_queue_num_t queueNum) -{ - CONST_T rtk_uint16 g_prioritytToQid[8][8]= { - {0, 0,0,0,0,0,0,0}, - {0, 0,0,0,7,7,7,7}, - {0, 0,0,0,1,1,7,7}, - {0, 0,1,1,2,2,7,7}, - {0, 0,1,1,2,3,7,7}, - {0, 0,1,2,3,4,7,7}, - {0, 0,1,2,3,4,5,7}, - {0,1,2,3,4,5,6,7} - }; - - CONST_T rtk_uint32 g_priorityDecision[8] = {0x01, 0x80,0x04,0x02,0x20,0x40,0x10,0x08}; - CONST_T rtk_uint32 g_prioritytRemap[8] = {0,1,2,3,4,5,6,7}; - - rtk_api_ret_t retVal; - rtk_uint32 qmapidx; - rtk_uint32 priority; - rtk_uint32 priDec; - rtk_uint32 port; - rtk_uint32 dscp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (queueNum <= 0 || queueNum > RTK_MAX_NUM_OF_QUEUE) - return RT_ERR_QUEUE_NUM; - - /*Set Output Queue Number*/ - if (RTK_MAX_NUM_OF_QUEUE == queueNum) - qmapidx = 0; - else - qmapidx = queueNum; - - RTK_SCAN_ALL_PHY_PORTMASK(port) - { - if ((retVal = rtl8367c_setAsicOutputQueueMappingIndex(port, qmapidx)) != RT_ERR_OK) - return retVal; - } - - /*Set Priority to Qid*/ - for (priority = 0; priority <= RTK_PRIMAX; priority++) - { - if ((retVal = rtl8367c_setAsicPriorityToQIDMappingTable(queueNum - 1, priority, g_prioritytToQid[queueNum - 1][priority])) != RT_ERR_OK) - return retVal; - } - - /*Set Flow Control Type to Ingress Flow Control*/ - if ((retVal = rtl8367c_setAsicFlowControlSelect(FC_INGRESS)) != RT_ERR_OK) - return retVal; - - - /*Priority Decision Order*/ - for (priDec = 0;priDec < PRIDEC_END;priDec++) - { - if ((retVal = rtl8367c_setAsicPriorityDecision(PRIDECTBL_IDX0, priDec, g_priorityDecision[priDec])) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicPriorityDecision(PRIDECTBL_IDX1, priDec, g_priorityDecision[priDec])) != RT_ERR_OK) - return retVal; - } - - /*Set Port-based Priority to 0*/ - RTK_SCAN_ALL_PHY_PORTMASK(port) - { - if ((retVal = rtl8367c_setAsicPriorityPortBased(port, 0)) != RT_ERR_OK) - return retVal; - } - - /*Disable 1p Remarking*/ - RTK_SCAN_ALL_PHY_PORTMASK(port) - { - if ((retVal = rtl8367c_setAsicRemarkingDot1pAbility(port, DISABLED)) != RT_ERR_OK) - return retVal; - } - - /*Disable DSCP Remarking*/ - if ((retVal = rtl8367c_setAsicRemarkingDscpAbility(DISABLED)) != RT_ERR_OK) - return retVal; - - /*Set 1p & DSCP Priority Remapping & Remarking*/ - for (priority = 0; priority <= RTL8367C_PRIMAX; priority++) - { - if ((retVal = rtl8367c_setAsicPriorityDot1qRemapping(priority, g_prioritytRemap[priority])) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRemarkingDot1pParameter(priority, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRemarkingDscpParameter(priority, 0)) != RT_ERR_OK) - return retVal; - } - - /*Set DSCP Priority*/ - for (dscp = 0; dscp <= 63; dscp++) - { - if ((retVal = rtl8367c_setAsicPriorityDscpBased(dscp, 0)) != RT_ERR_OK) - return retVal; - } - - /* Finetune B/T value */ - if((retVal = rtl8367c_setAsicReg(0x1722, 0x1158)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_priSel_set - * Description: - * Configure the priority order among different priority mechanism. - * Input: - * index - Priority decision table index (0~1) - * pPriDec - Priority assign for port, dscp, 802.1p, cvlan, svlan, acl based priority decision. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_SEL_PRI_SOURCE - Invalid priority decision source parameter. - * Note: - * ASIC will follow user priority setting of mechanisms to select mapped queue priority for receiving frame. - * If two priority mechanisms are the same, the ASIC will chose the highest priority from mechanisms to - * assign queue priority to receiving frame. - * The priority sources are: - * - PRIDEC_PORT - * - PRIDEC_ACL - * - PRIDEC_DSCP - * - PRIDEC_1Q - * - PRIDEC_1AD - * - PRIDEC_CVLAN - * - PRIDEC_DA - * - PRIDEC_SA - */ -rtk_api_ret_t rtk_qos_priSel_set(rtk_qos_priDecTbl_t index, rtk_priority_select_t *pPriDec) -{ - rtk_api_ret_t retVal; - rtk_uint32 port_pow; - rtk_uint32 dot1q_pow; - rtk_uint32 dscp_pow; - rtk_uint32 acl_pow; - rtk_uint32 svlan_pow; - rtk_uint32 cvlan_pow; - rtk_uint32 smac_pow; - rtk_uint32 dmac_pow; - rtk_uint32 i; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (index < 0 || index >= PRIDECTBL_END) - return RT_ERR_ENTRY_INDEX; - - if (pPriDec->port_pri >= 8 || pPriDec->dot1q_pri >= 8 || pPriDec->acl_pri >= 8 || pPriDec->dscp_pri >= 8 || - pPriDec->cvlan_pri >= 8 || pPriDec->svlan_pri >= 8 || pPriDec->dmac_pri >= 8 || pPriDec->smac_pri >= 8) - return RT_ERR_QOS_SEL_PRI_SOURCE; - - port_pow = 1; - for (i = pPriDec->port_pri; i > 0; i--) - port_pow = (port_pow)*2; - - dot1q_pow = 1; - for (i = pPriDec->dot1q_pri; i > 0; i--) - dot1q_pow = (dot1q_pow)*2; - - acl_pow = 1; - for (i = pPriDec->acl_pri; i > 0; i--) - acl_pow = (acl_pow)*2; - - dscp_pow = 1; - for (i = pPriDec->dscp_pri; i > 0; i--) - dscp_pow = (dscp_pow)*2; - - svlan_pow = 1; - for (i = pPriDec->svlan_pri; i > 0; i--) - svlan_pow = (svlan_pow)*2; - - cvlan_pow = 1; - for (i = pPriDec->cvlan_pri; i > 0; i--) - cvlan_pow = (cvlan_pow)*2; - - dmac_pow = 1; - for (i = pPriDec->dmac_pri; i > 0; i--) - dmac_pow = (dmac_pow)*2; - - smac_pow = 1; - for (i = pPriDec->smac_pri; i > 0; i--) - smac_pow = (smac_pow)*2; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_PORT, port_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_ACL, acl_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_DSCP, dscp_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_1Q, dot1q_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_1AD, svlan_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_CVLAN, cvlan_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_DA, dmac_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPriorityDecision(index, PRIDEC_SA, smac_pow)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_priSel_get - * Description: - * Get the priority order configuration among different priority mechanism. - * Input: - * index - Priority decision table index (0~1) - * Output: - * pPriDec - Priority assign for port, dscp, 802.1p, cvlan, svlan, acl based priority decision . - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * ASIC will follow user priority setting of mechanisms to select mapped queue priority for receiving frame. - * If two priority mechanisms are the same, the ASIC will chose the highest priority from mechanisms to - * assign queue priority to receiving frame. - * The priority sources are: - * - PRIDEC_PORT, - * - PRIDEC_ACL, - * - PRIDEC_DSCP, - * - PRIDEC_1Q, - * - PRIDEC_1AD, - * - PRIDEC_CVLAN, - * - PRIDEC_DA, - * - PRIDEC_SA, - */ -rtk_api_ret_t rtk_qos_priSel_get(rtk_qos_priDecTbl_t index, rtk_priority_select_t *pPriDec) -{ - - rtk_api_ret_t retVal; - rtk_int32 i; - rtk_uint32 port_pow; - rtk_uint32 dot1q_pow; - rtk_uint32 dscp_pow; - rtk_uint32 acl_pow; - rtk_uint32 svlan_pow; - rtk_uint32 cvlan_pow; - rtk_uint32 smac_pow; - rtk_uint32 dmac_pow; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (index < 0 || index >= PRIDECTBL_END) - return RT_ERR_ENTRY_INDEX; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_PORT, &port_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_ACL, &acl_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_DSCP, &dscp_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_1Q, &dot1q_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_1AD, &svlan_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_CVLAN, &cvlan_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_DA, &dmac_pow)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPriorityDecision(index, PRIDEC_SA, &smac_pow)) != RT_ERR_OK) - return retVal; - - for (i = 31; i >= 0; i--) - { - if (port_pow & (1 << i)) - { - pPriDec->port_pri = i; - break; - } - } - - for (i = 31; i >= 0; i--) - { - if (dot1q_pow & (1 << i)) - { - pPriDec->dot1q_pri = i; - break; - } - } - - for (i = 31; i >= 0; i--) - { - if (acl_pow & (1 << i)) - { - pPriDec->acl_pri = i; - break; - } - } - - for (i = 31; i >= 0; i--) - { - if (dscp_pow & (1 << i)) - { - pPriDec->dscp_pri = i; - break; - } - } - - for (i = 31; i >= 0; i--) - { - if (svlan_pow & (1 << i)) - { - pPriDec->svlan_pri = i; - break; - } - } - - for (i = 31;i >= 0; i--) - { - if (cvlan_pow & (1 << i)) - { - pPriDec->cvlan_pri = i; - break; - } - } - - for (i = 31; i >= 0; i--) - { - if (dmac_pow&(1<dmac_pri = i; - break; - } - } - - for (i = 31; i >= 0; i--) - { - if (smac_pow & (1 << i)) - { - pPriDec->smac_pri = i; - break; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pPriRemap_set - * Description: - * Configure 1Q priorities mapping to internal absolute priority. - * Input: - * dot1p_pri - 802.1p priority value. - * int_pri - internal priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of 802.1Q assignment for internal asic priority, and it is used for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_qos_1pPriRemap_set(rtk_pri_t dot1p_pri, rtk_pri_t int_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (dot1p_pri > RTL8367C_PRIMAX || int_pri > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if ((retVal = rtl8367c_setAsicPriorityDot1qRemapping(dot1p_pri, int_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pPriRemap_get - * Description: - * Get 1Q priorities mapping to internal absolute priority. - * Input: - * dot1p_pri - 802.1p priority value . - * Output: - * pInt_pri - internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_PRIORITY - Invalid priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * Priority of 802.1Q assigment for internal asic priority, and it is uesed for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_qos_1pPriRemap_get(rtk_pri_t dot1p_pri, rtk_pri_t *pInt_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (dot1p_pri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_getAsicPriorityDot1qRemapping(dot1p_pri, pInt_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpPriRemap_set - * Description: - * Map dscp value to internal priority. - * Input: - * dscp - Dscp value of receiving frame - * int_pri - internal priority value . - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The Differentiated Service Code Point is a selector for router's per-hop behaviors. As a selector, there is no implication that a numerically - * greater DSCP implies a better network service. As can be seen, the DSCP totally overlaps the old precedence field of TOS. So if values of - * DSCP are carefully chosen then backward compatibility can be achieved. - */ -rtk_api_ret_t rtk_qos_dscpPriRemap_set(rtk_dscp_t dscp, rtk_pri_t int_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (int_pri > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if (dscp > RTL8367C_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - if ((retVal = rtl8367c_setAsicPriorityDscpBased(dscp, int_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpPriRemap_get - * Description: - * Get dscp value to internal priority. - * Input: - * dscp - Dscp value of receiving frame - * Output: - * pInt_pri - internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value. - * Note: - * The Differentiated Service Code Point is a selector for router's per-hop behaviors. As a selector, there is no implication that a numerically - * greater DSCP implies a better network service. As can be seen, the DSCP totally overlaps the old precedence field of TOS. So if values of - * DSCP are carefully chosen then backward compatibility can be achieved. - */ -rtk_api_ret_t rtk_qos_dscpPriRemap_get(rtk_dscp_t dscp, rtk_pri_t *pInt_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (dscp > RTL8367C_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - if ((retVal = rtl8367c_getAsicPriorityDscpBased(dscp, pInt_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_portPri_set - * Description: - * Configure priority usage to each port. - * Input: - * port - Port id. - * int_pri - internal priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_SEL_PORT_PRI - Invalid port priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can set priority of port assignments for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_qos_portPri_set(rtk_port_t port, rtk_pri_t int_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (int_pri > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_setAsicPriorityPortBased(rtk_switch_port_L2P_get(port), int_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_portPri_get - * Description: - * Get priority usage to each port. - * Input: - * port - Port id. - * Output: - * pInt_pri - internal priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get priority of port assignments for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_qos_portPri_get(rtk_port_t port, rtk_pri_t *pInt_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicPriorityPortBased(rtk_switch_port_L2P_get(port), pInt_pri)) != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_queueNum_set - * Description: - * Set output queue number for each port. - * Input: - * port - Port id. - * index - Mapping queue number (1~8) - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QUEUE_NUM - Invalid queue number. - * Note: - * The API can set the output queue number of the specified port. The queue number is from 1 to 8. - */ -rtk_api_ret_t rtk_qos_queueNum_set(rtk_port_t port, rtk_queue_num_t queue_num) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((0 == queue_num) || (queue_num > RTK_MAX_NUM_OF_QUEUE)) - return RT_ERR_FAILED; - - if (RTK_MAX_NUM_OF_QUEUE == queue_num) - queue_num = 0; - - if ((retVal = rtl8367c_setAsicOutputQueueMappingIndex(rtk_switch_port_L2P_get(port), queue_num)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_queueNum_get - * Description: - * Get output queue number. - * Input: - * port - Port id. - * Output: - * pQueue_num - Mapping queue number - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API will return the output queue number of the specified port. The queue number is from 1 to 8. - */ -rtk_api_ret_t rtk_qos_queueNum_get(rtk_port_t port, rtk_queue_num_t *pQueue_num) -{ - rtk_api_ret_t retVal; - rtk_uint32 qidx; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicOutputQueueMappingIndex(rtk_switch_port_L2P_get(port), &qidx)) != RT_ERR_OK) - return retVal; - - if (0 == qidx) - *pQueue_num = 8; - else - *pQueue_num = qidx; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_priMap_set - * Description: - * Set output queue number for each port. - * Input: - * queue_num - Queue number usage. - * pPri2qid - Priority mapping to queue ID. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QUEUE_NUM - Invalid queue number. - * RT_ERR_QUEUE_ID - Invalid queue id. - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * ASIC supports priority mapping to queue with different queue number from 1 to 8. - * For different queue numbers usage, ASIC supports different internal available queue IDs. - */ -rtk_api_ret_t rtk_qos_priMap_set(rtk_queue_num_t queue_num, rtk_qos_pri2queue_t *pPri2qid) -{ - rtk_api_ret_t retVal; - rtk_uint32 pri; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((0 == queue_num) || (queue_num > RTK_MAX_NUM_OF_QUEUE)) - return RT_ERR_QUEUE_NUM; - - for (pri = 0; pri <= RTK_PRIMAX; pri++) - { - if (pPri2qid->pri2queue[pri] > RTK_QIDMAX) - return RT_ERR_QUEUE_ID; - - if ((retVal = rtl8367c_setAsicPriorityToQIDMappingTable(queue_num - 1, pri, pPri2qid->pri2queue[pri])) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_priMap_get - * Description: - * Get priority to queue ID mapping table parameters. - * Input: - * queue_num - Queue number usage. - * Output: - * pPri2qid - Priority mapping to queue ID. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QUEUE_NUM - Invalid queue number. - * Note: - * The API can return the mapping queue id of the specified priority and queue number. - * The queue number is from 1 to 8. - */ -rtk_api_ret_t rtk_qos_priMap_get(rtk_queue_num_t queue_num, rtk_qos_pri2queue_t *pPri2qid) -{ - rtk_api_ret_t retVal; - rtk_uint32 pri; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((0 == queue_num) || (queue_num > RTK_MAX_NUM_OF_QUEUE)) - return RT_ERR_QUEUE_NUM; - - for (pri = 0; pri <= RTK_PRIMAX; pri++) - { - if ((retVal = rtl8367c_getAsicPriorityToQIDMappingTable(queue_num-1, pri, &pPri2qid->pri2queue[pri])) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_schedulingQueue_set - * Description: - * Set weight and type of queues in dedicated port. - * Input: - * port - Port id. - * pQweights - The array of weights for WRR/WFQ queue (0 for STRICT_PRIORITY queue). - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_QUEUE_WEIGHT - Invalid queue weight. - * Note: - * The API can set weight and type, strict priority or weight fair queue (WFQ) for - * dedicated port for using queues. If queue id is not included in queue usage, - * then its type and weight setting in dummy for setting. There are priorities - * as queue id in strict queues. It means strict queue id 5 carrying higher priority - * than strict queue id 4. The WFQ queue weight is from 1 to 127, and weight 0 is - * for strict priority queue type. - */ -rtk_api_ret_t rtk_qos_schedulingQueue_set(rtk_port_t port, rtk_qos_queue_weights_t *pQweights) -{ - rtk_api_ret_t retVal; - rtk_uint32 qid; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - for (qid = 0; qid < RTL8367C_QUEUENO; qid ++) - { - - if (pQweights->weights[qid] > QOS_WEIGHT_MAX) - return RT_ERR_QOS_QUEUE_WEIGHT; - - if (0 == pQweights->weights[qid]) - { - if ((retVal = rtl8367c_setAsicQueueType(rtk_switch_port_L2P_get(port), qid, QTYPE_STRICT)) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtl8367c_setAsicQueueType(rtk_switch_port_L2P_get(port), qid, QTYPE_WFQ)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicWFQWeight(rtk_switch_port_L2P_get(port),qid, pQweights->weights[qid])) != RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_schedulingQueue_get - * Description: - * Get weight and type of queues in dedicated port. - * Input: - * port - Port id. - * Output: - * pQweights - The array of weights for WRR/WFQ queue (0 for STRICT_PRIORITY queue). - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get weight and type, strict priority or weight fair queue (WFQ) for dedicated port for using queues. - * The WFQ queue weight is from 1 to 127, and weight 0 is for strict priority queue type. - */ -rtk_api_ret_t rtk_qos_schedulingQueue_get(rtk_port_t port, rtk_qos_queue_weights_t *pQweights) -{ - rtk_api_ret_t retVal; - rtk_uint32 qid,qtype,qweight; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - for (qid = 0; qid < RTL8367C_QUEUENO; qid++) - { - if ((retVal = rtl8367c_getAsicQueueType(rtk_switch_port_L2P_get(port), qid, &qtype)) != RT_ERR_OK) - return retVal; - - if (QTYPE_STRICT == qtype) - { - pQweights->weights[qid] = 0; - } - else if (QTYPE_WFQ == qtype) - { - if ((retVal = rtl8367c_getAsicWFQWeight(rtk_switch_port_L2P_get(port), qid, &qweight)) != RT_ERR_OK) - return retVal; - pQweights->weights[qid] = qweight; - } - } - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pRemarkEnable_set - * Description: - * Set 1p Remarking state - * Input: - * port - Port id. - * enable - State of per-port 1p Remarking - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable parameter. - * Note: - * The API can enable or disable 802.1p remarking ability for whole system. - * The status of 802.1p remark: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_qos_1pRemarkEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicRemarkingDot1pAbility(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pRemarkEnable_get - * Description: - * Get 802.1p remarking ability. - * Input: - * port - Port id. - * Output: - * pEnable - Status of 802.1p remark. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1p remarking ability. - * The status of 802.1p remark: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_qos_1pRemarkEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicRemarkingDot1pAbility(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pRemark_set - * Description: - * Set 802.1p remarking parameter. - * Input: - * int_pri - Internal priority value. - * dot1p_pri - 802.1p priority value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_PRIORITY - Invalid 1p priority. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can set 802.1p parameters source priority and new priority. - */ -rtk_api_ret_t rtk_qos_1pRemark_set(rtk_pri_t int_pri, rtk_pri_t dot1p_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (int_pri > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if (dot1p_pri > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if ((retVal = rtl8367c_setAsicRemarkingDot1pParameter(int_pri, dot1p_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pRemark_get - * Description: - * Get 802.1p remarking parameter. - * Input: - * int_pri - Internal priority value. - * Output: - * pDot1p_pri - 802.1p priority value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can get 802.1p remarking parameters. It would return new priority of ingress priority. - */ -rtk_api_ret_t rtk_qos_1pRemark_get(rtk_pri_t int_pri, rtk_pri_t *pDot1p_pri) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (int_pri > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_getAsicRemarkingDot1pParameter(int_pri, pDot1p_pri)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pRemarkSrcSel_set - * Description: - * Set remarking source of 802.1p remarking. - * Input: - * type - remarking source - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - - * Note: - * The API can configure 802.1p remark functionality to map original 802.1p value or internal - * priority to TX DSCP value. - */ -rtk_api_ret_t rtk_qos_1pRemarkSrcSel_set(rtk_qos_1pRmkSrc_t type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= DOT1P_RMK_SRC_END ) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_setAsicRemarkingDot1pSrc(type)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_1pRemarkSrcSel_get - * Description: - * Get remarking source of 802.1p remarking. - * Input: - * none - * Output: - * pType - remarking source - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - - * Note: - * None - */ -rtk_api_ret_t rtk_qos_1pRemarkSrcSel_get(rtk_qos_1pRmkSrc_t *pType) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicRemarkingDot1pSrc(pType)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_qos_dscpRemarkEnable_set - * Description: - * Set DSCP remarking ability. - * Input: - * port - Port id. - * enable - status of DSCP remark. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * RT_ERR_ENABLE - Invalid enable parameter. - * Note: - * The API can enable or disable DSCP remarking ability for whole system. - * The status of DSCP remark: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_qos_dscpRemarkEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /*for whole system function, the port value should be 0xFF*/ - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicRemarkingDscpAbility(enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpRemarkEnable_get - * Description: - * Get DSCP remarking ability. - * Input: - * port - Port id. - * Output: - * pEnable - status of DSCP remarking. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get DSCP remarking ability. - * The status of DSCP remark: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_qos_dscpRemarkEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /*for whole system function, the port value should be 0xFF*/ - if (port != RTK_WHOLE_SYSTEM) - return RT_ERR_PORT_ID; - - if ((retVal = rtl8367c_getAsicRemarkingDscpAbility(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpRemark_set - * Description: - * Set DSCP remarking parameter. - * Input: - * int_pri - Internal priority value. - * dscp - DSCP value. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value. - * Note: - * The API can set DSCP value and mapping priority. - */ -rtk_api_ret_t rtk_qos_dscpRemark_set(rtk_pri_t int_pri, rtk_dscp_t dscp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (int_pri > RTK_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if (dscp > RTK_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - if ((retVal = rtl8367c_setAsicRemarkingDscpParameter(int_pri, dscp)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_qos_dscpRemark_get - * Description: - * Get DSCP remarking parameter. - * Input: - * int_pri - Internal priority value. - * Output: - * Dscp - DSCP value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority. - * Note: - * The API can get DSCP parameters. It would return DSCP value for mapping priority. - */ -rtk_api_ret_t rtk_qos_dscpRemark_get(rtk_pri_t int_pri, rtk_dscp_t *pDscp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (int_pri > RTK_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_getAsicRemarkingDscpParameter(int_pri, pDscp)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpRemarkSrcSel_set - * Description: - * Set remarking source of DSCP remarking. - * Input: - * type - remarking source - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - - * Note: - * The API can configure DSCP remark functionality to map original DSCP value or internal - * priority to TX DSCP value. - */ -rtk_api_ret_t rtk_qos_dscpRemarkSrcSel_set(rtk_qos_dscpRmkSrc_t type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= DSCP_RMK_SRC_END ) - return RT_ERR_QOS_INT_PRIORITY; - - if ((retVal = rtl8367c_setAsicRemarkingDscpSrc(type)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dcpRemarkSrcSel_get - * Description: - * Get remarking source of DSCP remarking. - * Input: - * none - * Output: - * pType - remarking source - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - - * Note: - * None - */ -rtk_api_ret_t rtk_qos_dscpRemarkSrcSel_get(rtk_qos_dscpRmkSrc_t *pType) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicRemarkingDscpSrc(pType)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpRemark2Dscp_set - * Description: - * Set DSCP to remarked DSCP mapping. - * Input: - * dscp - DSCP value - * rmkDscp - remarked DSCP value - * Output: - * None. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_DSCP_VALUE - Invalid dscp value - * Note: - * dscp parameter can be DSCP value or internal priority according to configuration of API - * dal_apollomp_qos_dscpRemarkSrcSel_set(), because DSCP remark functionality can map original DSCP - * value or internal priority to TX DSCP value. - */ -rtk_api_ret_t rtk_qos_dscpRemark2Dscp_set(rtk_dscp_t dscp, rtk_dscp_t rmkDscp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((dscp > RTK_DSCPMAX) || (rmkDscp > RTK_DSCPMAX)) - return RT_ERR_QOS_DSCP_VALUE; - - if ((retVal = rtl8367c_setAsicRemarkingDscp2Dscp(dscp, rmkDscp)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_dscpRemark2Dscp_get - * Description: - * Get DSCP to remarked DSCP mapping. - * Input: - * dscp - DSCP value - * Output: - * pDscp - remarked DSCP value - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_DSCP_VALUE - Invalid dscp value - * RT_ERR_NULL_POINTER - NULL pointer - * Note: - * None. - */ -rtk_api_ret_t rtk_qos_dscpRemark2Dscp_get(rtk_dscp_t dscp, rtk_dscp_t *pDscp) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (dscp > RTK_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - if ((retVal = rtl8367c_getAsicRemarkingDscp2Dscp(dscp, pDscp)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_portPriSelIndex_set - * Description: - * Configure priority decision index to each port. - * Input: - * port - Port id. - * index - priority decision index. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENTRY_INDEX - Invalid entry index. - * Note: - * The API can set priority of port assignments for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_qos_portPriSelIndex_set(rtk_port_t port, rtk_qos_priDecTbl_t index) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (index >= PRIDECTBL_END ) - return RT_ERR_ENTRY_INDEX; - - if ((retVal = rtl8367c_setAsicPortPriorityDecisionIndex(rtk_switch_port_L2P_get(port), index)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_qos_portPriSelIndex_get - * Description: - * Get priority decision index from each port. - * Input: - * port - Port id. - * Output: - * pIndex - priority decision index. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get priority of port assignments for queue usage and packet scheduling. - */ -rtk_api_ret_t rtk_qos_portPriSelIndex_get(rtk_port_t port, rtk_qos_priDecTbl_t *pIndex) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicPortPriorityDecisionIndex(rtk_switch_port_L2P_get(port), pIndex)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rate.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rate.c deleted file mode 100644 index a077e0c5cc..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rate.c +++ /dev/null @@ -1,607 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in rate module. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -/* Function Name: - * rtk_rate_shareMeter_set - * Description: - * Set meter configuration - * Input: - * index - shared meter index - * type - shared meter type - * rate - rate of share meter - * ifg_include - include IFG or not, ENABLE:include DISABLE:exclude - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * RT_ERR_RATE - Invalid rate - * RT_ERR_INPUT - Invalid input parameters - * Note: - * The API can set shared meter rate and ifg include for each meter. - * The rate unit is 1 kbps and the range is from 8k to 1048568k if type is METER_TYPE_KBPS and - * the granularity of rate is 8 kbps. - * The rate unit is packets per second and the range is 1 ~ 0x1FFF if type is METER_TYPE_PPS. - * The ifg_include parameter is used - * for rate calculation with/without inter-frame-gap and preamble. - */ -rtk_api_ret_t rtk_rate_shareMeter_set(rtk_meter_id_t index, rtk_meter_type_t type, rtk_rate_t rate, rtk_enable_t ifg_include) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - if (type >= METER_TYPE_END) - return RT_ERR_INPUT; - - if (ifg_include >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - switch (type) - { - case METER_TYPE_KBPS: - if (rate > RTL8367C_QOS_RATE_INPUT_MAX_HSG || rate < RTL8367C_QOS_RATE_INPUT_MIN) - return RT_ERR_RATE ; - - if ((retVal = rtl8367c_setAsicShareMeter(index, rate >> 3, ifg_include)) != RT_ERR_OK) - return retVal; - - break; - case METER_TYPE_PPS: - if (rate > RTL8367C_QOS_PPS_INPUT_MAX || rate < RTL8367C_QOS_PPS_INPUT_MIN) - return RT_ERR_RATE ; - - if ((retVal = rtl8367c_setAsicShareMeter(index, rate, ifg_include)) != RT_ERR_OK) - return retVal; - - break; - default: - return RT_ERR_INPUT; - } - - /* Set Type */ - if ((retVal = rtl8367c_setAsicShareMeterType(index, (rtk_uint32)type)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_shareMeter_get - * Description: - * Get meter configuration - * Input: - * index - shared meter index - * Output: - * pType - Meter Type - * pRate - pointer of rate of share meter - * pIfg_include - include IFG or not, ENABLE:include DISABLE:exclude - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * - */ -rtk_api_ret_t rtk_rate_shareMeter_get(rtk_meter_id_t index, rtk_meter_type_t *pType, rtk_rate_t *pRate, rtk_enable_t *pIfg_include) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - if(NULL == pType) - return RT_ERR_NULL_POINTER; - - if(NULL == pRate) - return RT_ERR_NULL_POINTER; - - if(NULL == pIfg_include) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicShareMeter(index, ®Data, pIfg_include)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicShareMeterType(index, (rtk_uint32 *)pType)) != RT_ERR_OK) - return retVal; - - if(*pType == METER_TYPE_KBPS) - *pRate = regData<<3; - else - *pRate = regData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_shareMeterBucket_set - * Description: - * Set meter Bucket Size - * Input: - * index - shared meter index - * bucket_size - Bucket Size - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_INPUT - Error Input - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * The API can set shared meter bucket size. - */ -rtk_api_ret_t rtk_rate_shareMeterBucket_set(rtk_meter_id_t index, rtk_uint32 bucket_size) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - if(bucket_size > RTL8367C_METERBUCKETSIZEMAX) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicShareMeterBucketSize(index, bucket_size)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_shareMeterBucket_get - * Description: - * Get meter Bucket Size - * Input: - * index - shared meter index - * Output: - * pBucket_size - Bucket Size - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * The API can get shared meter bucket size. - */ -rtk_api_ret_t rtk_rate_shareMeterBucket_get(rtk_meter_id_t index, rtk_uint32 *pBucket_size) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - if(NULL == pBucket_size) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicShareMeterBucketSize(index, pBucket_size)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_igrBandwidthCtrlRate_set - * Description: - * Set port ingress bandwidth control - * Input: - * port - Port id - * rate - Rate of share meter - * ifg_include - include IFG or not, ENABLE:include DISABLE:exclude - * fc_enable - enable flow control or not, ENABLE:use flow control DISABLE:drop - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid IFG parameter. - * RT_ERR_INBW_RATE - Invalid ingress rate parameter. - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -rtk_api_ret_t rtk_rate_igrBandwidthCtrlRate_set(rtk_port_t port, rtk_rate_t rate, rtk_enable_t ifg_include, rtk_enable_t fc_enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(ifg_include >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(fc_enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if(rtk_switch_isHsgPort(port) == RT_ERR_OK) - { - if ((rate > RTL8367C_QOS_RATE_INPUT_MAX_HSG) || (rate < RTL8367C_QOS_RATE_INPUT_MIN)) - return RT_ERR_QOS_EBW_RATE ; - } - else - { - if ((rate > RTL8367C_QOS_RATE_INPUT_MAX) || (rate < RTL8367C_QOS_RATE_INPUT_MIN)) - return RT_ERR_QOS_EBW_RATE ; - } - - if ((retVal = rtl8367c_setAsicPortIngressBandwidth(rtk_switch_port_L2P_get(port), rate>>3, ifg_include,fc_enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_igrBandwidthCtrlRate_get - * Description: - * Get port ingress bandwidth control - * Input: - * port - Port id - * Output: - * pRate - Rate of share meter - * pIfg_include - Rate's calculation including IFG, ENABLE:include DISABLE:exclude - * pFc_enable - enable flow control or not, ENABLE:use flow control DISABLE:drop - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -rtk_api_ret_t rtk_rate_igrBandwidthCtrlRate_get(rtk_port_t port, rtk_rate_t *pRate, rtk_enable_t *pIfg_include, rtk_enable_t *pFc_enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pIfg_include) - return RT_ERR_NULL_POINTER; - - if(NULL == pFc_enable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortIngressBandwidth(rtk_switch_port_L2P_get(port), ®Data, pIfg_include, pFc_enable)) != RT_ERR_OK) - return retVal; - - *pRate = regData<<3; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_egrBandwidthCtrlRate_set - * Description: - * Set port egress bandwidth control - * Input: - * port - Port id - * rate - Rate of egress bandwidth - * ifg_include - include IFG or not, ENABLE:include DISABLE:exclude - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_QOS_EBW_RATE - Invalid egress bandwidth/rate - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -rtk_api_ret_t rtk_rate_egrBandwidthCtrlRate_set( rtk_port_t port, rtk_rate_t rate, rtk_enable_t ifg_include) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(rtk_switch_isHsgPort(port) == RT_ERR_OK) - { - if ((rate > RTL8367C_QOS_RATE_INPUT_MAX_HSG) || (rate < RTL8367C_QOS_RATE_INPUT_MIN)) - return RT_ERR_QOS_EBW_RATE ; - } - else - { - if ((rate > RTL8367C_QOS_RATE_INPUT_MAX) || (rate < RTL8367C_QOS_RATE_INPUT_MIN)) - return RT_ERR_QOS_EBW_RATE ; - } - - if (ifg_include >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicPortEgressRate(rtk_switch_port_L2P_get(port), rate>>3)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPortEgressRateIfg(ifg_include)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_egrBandwidthCtrlRate_get - * Description: - * Get port egress bandwidth control - * Input: - * port - Port id - * Output: - * pRate - Rate of egress bandwidth - * pIfg_include - Rate's calculation including IFG, ENABLE:include DISABLE:exclude - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The rate unit is 1 kbps and the range is from 8k to 1048568k. The granularity of rate is 8 kbps. - * The ifg_include parameter is used for rate calculation with/without inter-frame-gap and preamble. - */ -rtk_api_ret_t rtk_rate_egrBandwidthCtrlRate_get(rtk_port_t port, rtk_rate_t *pRate, rtk_enable_t *pIfg_include) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pRate) - return RT_ERR_NULL_POINTER; - - if(NULL == pIfg_include) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortEgressRate(rtk_switch_port_L2P_get(port), ®Data)) != RT_ERR_OK) - return retVal; - - *pRate = regData << 3; - - if ((retVal = rtl8367c_getAsicPortEgressRateIfg((rtk_uint32*)pIfg_include)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_rate_egrQueueBwCtrlEnable_get - * Description: - * Get enable status of egress bandwidth control on specified queue. - * Input: - * unit - unit id - * port - port id - * queue - queue id - * Output: - * pEnable - Pointer to enable status of egress queue bandwidth control - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -rtk_api_ret_t rtk_rate_egrQueueBwCtrlEnable_get(rtk_port_t port, rtk_qid_t queue, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /*for whole port function, the queue value should be 0xFF*/ - if (queue != RTK_WHOLE_SYSTEM) - return RT_ERR_QUEUE_ID; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicAprEnable(rtk_switch_port_L2P_get(port),pEnable))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_egrQueueBwCtrlEnable_set - * Description: - * Set enable status of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * enable - enable status of egress queue bandwidth control - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_INPUT - invalid input parameter - * Note: - * None - */ -rtk_api_ret_t rtk_rate_egrQueueBwCtrlEnable_set(rtk_port_t port, rtk_qid_t queue, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /*for whole port function, the queue value should be 0xFF*/ - if (queue != RTK_WHOLE_SYSTEM) - return RT_ERR_QUEUE_ID; - - if (enable>=RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicAprEnable(rtk_switch_port_L2P_get(port), enable))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_egrQueueBwCtrlRate_get - * Description: - * Get rate of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * pIndex - shared meter index - * Output: - * pRate - pointer to rate of egress queue bandwidth control - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_FILTER_METER_ID - Invalid meter id - * Note: - * The actual rate control is set in shared meters. - * The unit of granularity is 8Kbps. - */ -rtk_api_ret_t rtk_rate_egrQueueBwCtrlRate_get(rtk_port_t port, rtk_qid_t queue, rtk_meter_id_t *pIndex) -{ - rtk_api_ret_t retVal; - rtk_uint32 offset_idx; - rtk_uint32 phy_port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (queue >= RTK_MAX_NUM_OF_QUEUE) - return RT_ERR_QUEUE_ID; - - if(NULL == pIndex) - return RT_ERR_NULL_POINTER; - - phy_port = rtk_switch_port_L2P_get(port); - if ((retVal=rtl8367c_getAsicAprMeter(phy_port, queue,&offset_idx))!=RT_ERR_OK) - return retVal; - - *pIndex = offset_idx + ((phy_port%4)*8); - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_rate_egrQueueBwCtrlRate_set - * Description: - * Set rate of egress bandwidth control on specified queue. - * Input: - * port - port id - * queue - queue id - * index - shared meter index - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_QUEUE_ID - invalid queue id - * RT_ERR_FILTER_METER_ID - Invalid meter id - * Note: - * The actual rate control is set in shared meters. - * The unit of granularity is 8Kbps. - */ -rtk_api_ret_t rtk_rate_egrQueueBwCtrlRate_set(rtk_port_t port, rtk_qid_t queue, rtk_meter_id_t index) -{ - rtk_api_ret_t retVal; - rtk_uint32 offset_idx; - rtk_uint32 phy_port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (queue >= RTK_MAX_NUM_OF_QUEUE) - return RT_ERR_QUEUE_ID; - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - phy_port = rtk_switch_port_L2P_get(port); - if (index < ((phy_port%4)*8) || index > (7 + (phy_port%4)*8)) - return RT_ERR_FILTER_METER_ID; - - offset_idx = index - ((phy_port%4)*8); - - if ((retVal=rtl8367c_setAsicAprMeter(phy_port,queue,offset_idx))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rldp.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rldp.c deleted file mode 100644 index d3ca029751..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rldp.c +++ /dev/null @@ -1,468 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (¶g¤T, 08 ¤T¤ë 2017) $ - * - * Purpose : Declaration of RLDP and RLPP API - * - * Feature : The file have include the following module and sub-modules - * 1) RLDP and RLPP configuration and status - * - */ - - -/* - * Include Files - */ -#include -#include -//#include -#include - -#include -#include - -/* - * Symbol Definition - */ - - -/* - * Data Declaration - */ - - -/* - * Macro Declaration - */ - - -/* - * Function Declaration - */ - -/* Module Name : RLDP */ - -/* Function Name: - * rtk_rldp_config_set - * Description: - * Set RLDP module configuration - * Input: - * pConfig - configuration structure of RLDP - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -rtk_api_ret_t rtk_rldp_config_set(rtk_rldp_config_t *pConfig) -{ - rtk_api_ret_t retVal; - ether_addr_t magic; - rtk_uint32 pmsk; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (pConfig->rldp_enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (pConfig->trigger_mode >= RTK_RLDP_TRIGGER_END) - return RT_ERR_INPUT; - - if (pConfig->compare_type >= RTK_RLDP_CMPTYPE_END) - return RT_ERR_INPUT; - - if (pConfig->num_check >= RTK_RLDP_NUM_MAX) - return RT_ERR_INPUT; - - if (pConfig->interval_check >= RTK_RLDP_INTERVAL_MAX) - return RT_ERR_INPUT; - - if (pConfig->num_loop >= RTK_RLDP_NUM_MAX) - return RT_ERR_INPUT; - - if (pConfig->interval_loop >= RTK_RLDP_INTERVAL_MAX) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicRldpTxPortmask(&pmsk))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpTxPortmask(0x00))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpTxPortmask(pmsk))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldp(pConfig->rldp_enable))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpTriggerMode(pConfig->trigger_mode))!=RT_ERR_OK) - return retVal; - - memcpy(&magic, &pConfig->magic, sizeof(ether_addr_t)); - if ((retVal = rtl8367c_setAsicRldpMagicNum(magic))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpCompareRandomNumber(pConfig->compare_type))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpCompareRandomNumber(pConfig->compare_type))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpCheckingStatePara(pConfig->num_check, pConfig->interval_check))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRldpLoopStatePara(pConfig->num_loop, pConfig->interval_loop))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_rldp_config_get - * Description: - * Get RLDP module configuration - * Input: - * None - * Output: - * pConfig - configuration structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -rtk_api_ret_t rtk_rldp_config_get(rtk_rldp_config_t *pConfig) -{ - rtk_api_ret_t retVal; - ether_addr_t magic; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicRldp(&pConfig->rldp_enable))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRldpTriggerMode(&pConfig->trigger_mode))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRldpMagicNum(&magic))!=RT_ERR_OK) - return retVal; - memcpy(&pConfig->magic, &magic, sizeof(ether_addr_t)); - - if ((retVal = rtl8367c_getAsicRldpCompareRandomNumber(&pConfig->compare_type))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRldpCompareRandomNumber(&pConfig->compare_type))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRldpCheckingStatePara(&pConfig->num_check, &pConfig->interval_check))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRldpLoopStatePara(&pConfig->num_loop, &pConfig->interval_loop))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_rldp_portConfig_set - * Description: - * Set per port RLDP module configuration - * Input: - * port - port number to be configured - * pPortConfig - per port configuration structure of RLDP - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -rtk_api_ret_t rtk_rldp_portConfig_set(rtk_port_t port, rtk_rldp_portConfig_t *pPortConfig) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - rtk_uint32 phy_port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (pPortConfig->tx_enable>= RTK_ENABLE_END) - return RT_ERR_INPUT; - - phy_port = rtk_switch_port_L2P_get(port); - - if ((retVal = rtl8367c_getAsicRldpTxPortmask(&pmsk))!=RT_ERR_OK) - return retVal; - - if (pPortConfig->tx_enable) - { - pmsk |=(1<tx_enable = ENABLED; - } - else - { - pPortConfig->tx_enable = DISABLED; - } - - return RT_ERR_OK; -} /* end of rtk_rldp_portConfig_get */ - - -/* Function Name: - * rtk_rldp_status_get - * Description: - * Get RLDP module status - * Input: - * None - * Output: - * pStatus - status structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - * Note: - * None - */ -rtk_api_ret_t rtk_rldp_status_get(rtk_rldp_status_t *pStatus) -{ - rtk_api_ret_t retVal; - ether_addr_t seed; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_getAsicRldpRandomNumber(&seed))!=RT_ERR_OK) - return retVal; - memcpy(&pStatus->id, &seed, sizeof(ether_addr_t)); - - return RT_ERR_OK; -} /* end of rtk_rldp_status_get */ - - -/* Function Name: - * rtk_rldp_portStatus_get - * Description: - * Get RLDP module status - * Input: - * port - port number to be get - * Output: - * pPortStatus - per port status structure of RLDP - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * None - */ -rtk_api_ret_t rtk_rldp_portStatus_get(rtk_port_t port, rtk_rldp_portStatus_t *pPortStatus) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - rtk_portmask_t logicalPmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicRldpLoopedPortmask(&pmsk))!=RT_ERR_OK) - return retVal; - if ((retVal = rtk_switch_portmask_P2L_get(pmsk, &logicalPmask)) != RT_ERR_OK) - return retVal; - - if (logicalPmask.bits[0] & (1<loop_status = RTK_RLDP_LOOPSTS_LOOPING; - } - else - { - pPortStatus->loop_status = RTK_RLDP_LOOPSTS_NONE; - } - - if ((retVal = rtl8367c_getAsicRldpEnterLoopedPortmask(&pmsk))!=RT_ERR_OK) - return retVal; - if ((retVal = rtk_switch_portmask_P2L_get(pmsk, &logicalPmask)) != RT_ERR_OK) - return retVal; - - if (logicalPmask.bits[0] & (1<loop_enter = RTK_RLDP_LOOPSTS_LOOPING; - } - else - { - pPortStatus->loop_enter = RTK_RLDP_LOOPSTS_NONE; - } - - if ((retVal = rtl8367c_getAsicRldpLeaveLoopedPortmask(&pmsk))!=RT_ERR_OK) - return retVal; - if ((retVal = rtk_switch_portmask_P2L_get(pmsk, &logicalPmask)) != RT_ERR_OK) - return retVal; - - if (logicalPmask.bits[0] & (1<loop_leave = RTK_RLDP_LOOPSTS_LOOPING; - } - else - { - pPortStatus->loop_leave = RTK_RLDP_LOOPSTS_NONE; - } - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_rldp_portStatus_clear - * Description: - * Clear RLDP module status - * Input: - * port - port number to be clear - * pPortStatus - per port status structure of RLDP - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - * RT_ERR_NULL_POINTER - * Note: - * Clear operation effect loop_enter and loop_leave only, other field in - * the structure are don't care. Loop status cab't be clean. - */ -rtk_api_ret_t rtk_rldp_portStatus_set(rtk_port_t port, rtk_rldp_portStatus_t *pPortStatus) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - pmsk = (pPortStatus->loop_enter)<loop_leave)< -#include -#include "./include/rtk_switch.h" -#include "./include/vlan.h" -#include "./include/port.h" -#include "./include/rate.h" -#include "./include/rtk_hal.h" -#include "./include/l2.h" -#include "./include/stat.h" -#include "./include/igmp.h" -#include "./include/trap.h" -#include "./include/leaky.h" -#include "./include/mirror.h" -#include "./include/rtl8367c_asicdrv_port.h" -#include "./include/rtl8367c_asicdrv_mib.h" -#include "./include/smi.h" -#include "./include/qos.h" -#include "./include/trunk.h" - -void rtk_hal_switch_init(void) -{ - if(rtk_switch_init() != 0) - printk("rtk_switch_init failed\n"); - mdelay(500); - /*vlan init */ - if (rtk_vlan_init() != 0) - printk("rtk_vlan_init failed\n"); -} - -void rtk_hal_dump_full_mib(void) -{ - rtk_port_t port; - rtk_stat_counter_t Cntr; - rtk_stat_port_type_t cntr_idx; - - for (port = UTP_PORT0; port < (UTP_PORT0 + 5); port++) { - printk("\nPort%d\n", port); - for (cntr_idx = STAT_IfInOctets; cntr_idx < STAT_PORT_CNTR_END; cntr_idx ++) { - rtk_stat_port_get(port, cntr_idx, &Cntr); - printk("%8llu ", Cntr); - if (((cntr_idx%10) == 9)) - printk("\n"); - } - } - - for (port = EXT_PORT0; port < (EXT_PORT0 + 2); port++) { - printk("\nPort%d\n", port); - for (cntr_idx = STAT_IfInOctets; cntr_idx < STAT_PORT_CNTR_END; cntr_idx ++) { - rtk_stat_port_get(port, cntr_idx, &Cntr); - printk("%8llu ", Cntr); - if (((cntr_idx%10) == 9)) - printk("\n"); - } - } - rtk_stat_global_reset(); -} -void rtk_dump_mib_type(rtk_stat_port_type_t cntr_idx) -{ - rtk_port_t port; - rtk_stat_counter_t Cntr; - - for (port = UTP_PORT0; port < (UTP_PORT0 + 5); port++) { - rtk_stat_port_get(port, cntr_idx, &Cntr); - printk("%8llu", Cntr); - } - for (port = EXT_PORT0; port < (EXT_PORT0 + 2); port++) { - rtk_stat_port_get(port, cntr_idx, &Cntr); - printk("%8llu", Cntr); - } - printk("\n"); -} - -void rtk_hal_dump_mib(void) -{ - - printk("==================%8s%8s%8s%8s%8s%8s%8s\n", "Port0", "Port1", - "Port2", "Port3", "Port4", "Port16", "Port17"); - /* Get TX Unicast Pkts */ - printk("TX Unicast Pkts :"); - rtk_dump_mib_type(STAT_IfOutUcastPkts); - /* Get TX Multicast Pkts */ - printk("TX Multicast Pkts:"); - rtk_dump_mib_type(STAT_IfOutMulticastPkts); - /* Get TX BroadCast Pkts */ - printk("TX BroadCast Pkts:"); - rtk_dump_mib_type(STAT_IfOutBroadcastPkts); - /* Get TX Collisions */ - /* Get TX Puase Frames */ - printk("TX Pause Frames :"); - rtk_dump_mib_type(STAT_Dot3OutPauseFrames); - /* Get TX Drop Events */ - /* Get RX Unicast Pkts */ - printk("RX Unicast Pkts :"); - rtk_dump_mib_type(STAT_IfInUcastPkts); - /* Get RX Multicast Pkts */ - printk("RX Multicast Pkts:"); - rtk_dump_mib_type(STAT_IfInMulticastPkts); - /* Get RX Broadcast Pkts */ - printk("RX Broadcast Pkts:"); - rtk_dump_mib_type(STAT_IfInBroadcastPkts); - /* Get RX FCS Erros */ - printk("RX FCS Errors :"); - rtk_dump_mib_type(STAT_Dot3StatsFCSErrors); - /* Get RX Undersize Pkts */ - printk("RX Undersize Pkts:"); - rtk_dump_mib_type(STAT_EtherStatsUnderSizePkts); - /* Get RX Discard Pkts */ - printk("RX Discard Pkts :"); - rtk_dump_mib_type(STAT_Dot1dTpPortInDiscards); - /* Get RX Fragments */ - printk("RX Fragments :"); - rtk_dump_mib_type(STAT_EtherStatsFragments); - /* Get RX Oversize Pkts */ - printk("RX Oversize Pkts :"); - rtk_dump_mib_type(STAT_EtherOversizeStats); - /* Get RX Jabbers */ - printk("RX Jabbers :"); - rtk_dump_mib_type(STAT_EtherStatsJabbers); - /* Get RX Pause Frames */ - printk("RX Pause Frames :"); - rtk_dump_mib_type(STAT_Dot3InPauseFrames); - /* clear MIB */ - rtk_stat_global_reset(); -} -EXPORT_SYMBOL(rtk_hal_dump_mib); - -int rtk_hal_dump_vlan(void) -{ - rtk_vlan_cfg_t vlan; - int i; - - printk("vid portmap\n"); - for (i = 0; i < RTK_SW_VID_RANGE; i++) { - rtk_vlan_get(i, &vlan); - printk("%3d ", i); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT0) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT1) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT2) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT3) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT4) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - EXT_PORT0) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - EXT_PORT1) ? '1' : '-'); - printk("\n"); - } - return 0; -} - -void rtk_hal_clear_vlan(void) -{ - rtk_api_ret_t ret; - - ret = rtk_vlan_reset(); - if (ret != RT_ERR_OK) - printk("rtk_vlan_reset failed\n"); -} - -int rtk_hal_set_vlan(struct ra_switch_ioctl_data *data) -{ - rtk_vlan_cfg_t vlan; - rtk_api_ret_t ret; - int i; - - /* clear vlan entry first */ - memset(&vlan, 0x00, sizeof(rtk_vlan_cfg_t)); - RTK_PORTMASK_CLEAR(vlan.mbr); - RTK_PORTMASK_CLEAR(vlan.untag); - rtk_vlan_set(data->vid, &vlan); - - memset(&vlan, 0x00, sizeof(rtk_vlan_cfg_t)); - for (i = 0; i < 5; i++) { - if (data->port_map & (1 << i)) { - RTK_PORTMASK_PORT_SET(vlan.mbr, i); - RTK_PORTMASK_PORT_SET(vlan.untag, i); - rtk_vlan_portPvid_set(i, data->vid, 0); - } - } - for (i = 0; i < 2; i++) { - if (data->port_map & (1 << (i + 5))) { - RTK_PORTMASK_PORT_SET(vlan.mbr, (i + EXT_PORT0)); - RTK_PORTMASK_PORT_SET(vlan.untag, (i + EXT_PORT0)); - rtk_vlan_portPvid_set((i + EXT_PORT0), data->vid, 0); - } - } - vlan.ivl_en = 1; - ret = rtk_vlan_set(data->vid, &vlan); - - return 0; -} - -void rtk_hal_vlan_portpvid_set(rtk_port_t port, rtk_vlan_t pvid, rtk_pri_t priority) -{ - rtk_vlan_portPvid_set(port, pvid, priority); -} - -int rtk_hal_set_ingress_rate(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - - if (data->on_off == 1) - ret = - rtk_rate_igrBandwidthCtrlRate_set(data->port, data->bw, 0, - 1); - else - ret = - rtk_rate_igrBandwidthCtrlRate_set(data->port, 1048568, 0, - 1); - - return ret; -} - -int rtk_hal_set_egress_rate(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - - if (data->on_off == 1) - ret = - rtk_rate_egrBandwidthCtrlRate_set(data->port, data->bw, 1); - else - ret = rtk_rate_egrBandwidthCtrlRate_set(data->port, 1048568, 1); - - return ret; -} - -void rtk_hal_dump_table(void) -{ - rtk_uint32 i; - rtk_uint32 address = 0; - rtk_l2_ucastAddr_t l2_data; - rtk_l2_ipMcastAddr_t ipMcastAddr; - - printk("hash port(0:17) fid vid mac-address\n"); - while (1) { - if (rtk_l2_addr_next_get(READMETHOD_NEXT_L2UC, UTP_PORT0, &address, &l2_data) != RT_ERR_OK) { - break; - } else { - printk("%03x ", l2_data.address); - for (i = 0; i < 5; i++) - if ( l2_data.port == i) - printk("1"); - else - printk("-"); - for (i = 16; i < 18; i++) - if ( l2_data.port == i) - printk("1"); - else - printk("-"); - - printk(" %2d", l2_data.fid); - printk(" %4d", l2_data.cvid); - printk(" %02x%02x%02x%02x%02x%02x\n", l2_data.mac.octet[0], - l2_data.mac.octet[1], l2_data.mac.octet[2], l2_data.mac.octet[3], - l2_data.mac.octet[4], l2_data.mac.octet[5]); - address ++; - } - } - - address = 0; - while (1) { - if (rtk_l2_ipMcastAddr_next_get(&address, &ipMcastAddr) != RT_ERR_OK) { - break; - } else { - printk("%03x ", ipMcastAddr.address); - for (i = 0; i < 5; i++) - printk("%c", RTK_PORTMASK_IS_PORT_SET(ipMcastAddr.portmask, i) ? '1' : '-'); - for (i = 16; i < 18; i++) - printk("%c", RTK_PORTMASK_IS_PORT_SET(ipMcastAddr.portmask, i) ? '1' : '-'); - printk(" "); - printk("01005E%06x\n", (ipMcastAddr.dip & 0xefffff)); - address ++; - } - } -} - -void rtk_hal_clear_table(void) -{ - rtk_api_ret_t ret; - - ret = rtk_l2_table_clear(); - if (ret != RT_ERR_OK) - printk("rtk_l2_table_clear failed\n"); -} - -void rtk_hal_add_table(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_l2_ucastAddr_t l2_entry; - rtk_mac_t mac; - - mac.octet[0] =data->mac[0]; - mac.octet[1] =data->mac[1]; - mac.octet[2] =data->mac[2]; - mac.octet[3] =data->mac[3]; - mac.octet[4] =data->mac[4]; - mac.octet[5] =data->mac[5]; - - memset(&l2_entry, 0x00, sizeof(rtk_l2_ucastAddr_t)); - l2_entry.port = data->port; - l2_entry.ivl = 1; - l2_entry.cvid = data->vid; - l2_entry.fid = 0; - l2_entry.efid = 0; - l2_entry.is_static = 1; - ret = rtk_l2_addr_add(&mac, &l2_entry); - if (ret != RT_ERR_OK) - printk("rtk_hal_add_table failed\n"); -} - -void rtk_hal_del_table(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_l2_ucastAddr_t l2_entry; - rtk_mac_t mac; - - mac.octet[0] =data->mac[0]; - mac.octet[1] =data->mac[1]; - mac.octet[2] =data->mac[2]; - mac.octet[3] =data->mac[3]; - mac.octet[4] =data->mac[4]; - mac.octet[5] =data->mac[5]; - - memset(&l2_entry, 0x00, sizeof(rtk_l2_ucastAddr_t)); - l2_entry.port = data->port; - l2_entry.ivl = 1; - l2_entry.cvid = data->vid; - l2_entry.fid = 0; - l2_entry.efid = 0; - ret = rtk_l2_addr_del(&mac, &l2_entry); - if (ret != RT_ERR_OK) - printk("rtk_hal_add_table failed\n"); -} -void rtk_hal_get_phy_status(struct ra_switch_ioctl_data *data) -{ - rtk_port_linkStatus_t linkStatus; - rtk_port_speed_t speed; - rtk_port_duplex_t duplex; - - rtk_port_phyStatus_get(data->port, &linkStatus, &speed, &duplex); - printk("Port%d Status:\n", data->port); - if (linkStatus == 1) { - printk("Link Up"); - if (speed == 0) - printk(" 10M"); - else if (speed == 1) - printk(" 100M"); - else if (speed == 2) - printk(" 1000M"); - if (duplex == 0) - printk(" Half Duplex\n"); - else - printk(" Full Duplex\n"); - } else - printk("Link Down\n"); - -} - -void rtk_hal_set_port_mirror(struct ra_switch_ioctl_data *data) -{ - rtk_portmask_t rx_portmask; - rtk_portmask_t tx_portmask; - rtk_api_ret_t ret; - int i; - - rtk_mirror_portIso_set(ENABLED); - RTK_PORTMASK_CLEAR(rx_portmask); - RTK_PORTMASK_CLEAR(tx_portmask); - for (i = 0; i < 5; i++) - if (data->rx_port_map & (1 << i)) - RTK_PORTMASK_PORT_SET(rx_portmask, i); - for (i = 0; i < 2; i++) - if (data->rx_port_map & (1 << (i + 5))) - RTK_PORTMASK_PORT_SET(rx_portmask, (i + EXT_PORT0)); - - RTK_PORTMASK_CLEAR(tx_portmask); - for (i = 0; i < 5; i++) - if (data->tx_port_map & (1 << i)) - RTK_PORTMASK_PORT_SET(tx_portmask, i); - for (i = 0; i < 2; i++) - if (data->tx_port_map & (1 << (i + 5))) - RTK_PORTMASK_PORT_SET(tx_portmask, (i + EXT_PORT0)); - - ret = rtk_mirror_portBased_set(data->port, &rx_portmask, &tx_portmask); - if (!ret) - printk("rtk_mirror_portBased_set success\n"); -} - -void rtk_hal_read_reg(struct ra_switch_ioctl_data *data) -{ - ret_t retVal; - - retVal = smi_read(data->reg_addr, &data->reg_val); - if(retVal != RT_ERR_OK) - printk("switch reg read failed\n"); - else - printk("reg0x%x = 0x%x\n", data->reg_addr, data->reg_val); -} - -void rtk_hal_write_reg(struct ra_switch_ioctl_data *data) -{ - ret_t retVal; - - retVal = smi_write(data->reg_addr, data->reg_val); - if(retVal != RT_ERR_OK) - printk("switch reg write failed\n"); - else - printk("write switch reg0x%x 0x%x success\n", data->reg_addr, data->reg_val); -} - -void rtk_hal_get_phy_reg(struct ra_switch_ioctl_data *data) -{ - ret_t retVal; - rtk_port_phy_data_t Data; - - retVal = rtk_port_phyReg_get(data->port, data->reg_addr, &Data); - if (retVal == RT_ERR_OK) - printk("Get: phy[%d].reg[%d] = 0x%04x\n", data->port, data->reg_addr, Data); - else - printk("read phy reg failed\n"); -} - -void rtk_hal_set_phy_reg(struct ra_switch_ioctl_data *data) -{ - ret_t retVal; - - retVal = rtk_port_phyReg_set(data->port, data->reg_addr, data->reg_val); - if (retVal == RT_ERR_OK) - printk("Set: phy[%d].reg[%d] = 0x%04x\n", data->port, data->reg_addr, data->reg_val); - else - printk("write phy reg failed\n"); -} -void rtk_hal_qos_en(struct ra_switch_ioctl_data *data) -{ - - if (data->on_off == 1) { - if (rtk_qos_init(8) != 0) - printk("rtk_qos_init(8) failed\n"); - } - else { - if (rtk_qos_init(1) != 0) - printk("rtk_qos_init(1) failed\n"); - } -} - -void rtk_hal_qos_set_table2type(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_priority_select_t PriDec; - - /* write all pri to 0 */ - PriDec.port_pri = 0; - PriDec.dot1q_pri = 0; - PriDec.acl_pri = 0; - PriDec.cvlan_pri = 0; - PriDec.svlan_pri = 0; - PriDec.dscp_pri = 0; - PriDec.dmac_pri = 0; - PriDec.smac_pri = 0; - - if (data->qos_type == 0) - PriDec.port_pri = 1; - else if (data->qos_type == 1) - PriDec.dot1q_pri = 1; - else if (data->qos_type == 2) - PriDec.acl_pri = 1; - else if (data->qos_type == 3) - PriDec.dscp_pri = 1; - else if (data->qos_type == 4) - PriDec.cvlan_pri = 1; - else if (data->qos_type == 5) - PriDec.svlan_pri = 1; - else if (data->qos_type == 6) - PriDec.dmac_pri = 1; - else if (data->qos_type == 7) - PriDec.smac_pri = 1; - - if (data->qos_table_idx == 0) - ret = rtk_qos_priSel_set(PRIDECTBL_IDX0, &PriDec); - else - ret = rtk_qos_priSel_set(PRIDECTBL_IDX1, &PriDec); - - if (ret != 0) - printk("rtk_qos_priSel_set failed\n"); - -} - -void rtk_hal_qos_get_table2type(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_priority_select_t PriDec; - - if (data->qos_table_idx == 0) - ret = rtk_qos_priSel_get(PRIDECTBL_IDX0, &PriDec); - else - ret = rtk_qos_priSel_get(PRIDECTBL_IDX1, &PriDec); - - if (ret != 0) - printk("rtk_qos_priSel_set failed\n"); - else { - printk("port_pri = %d\n", PriDec.port_pri); - printk("dot1q_pri = %d\n", PriDec.dot1q_pri); - printk("acl_pri = %d\n", PriDec.acl_pri); - printk("dscp_pri = %d\n", PriDec.dscp_pri); - printk("cvlan_pri = %d\n", PriDec.cvlan_pri); - printk("svlan_pri = %d\n", PriDec.svlan_pri); - printk("dmac_pri = %d\n", PriDec.dmac_pri); - printk("smac_pri = %d\n", PriDec.smac_pri); - } -} - -void rtk_hal_qos_set_port2table(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - - ret = rtk_qos_portPriSelIndex_set(data->port, data->qos_table_idx); - if (ret != 0) - printk("rtk_qos_portPriSelIndex_set failed\n"); -} - -void rtk_hal_qos_get_port2table(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_qos_priDecTbl_t Index; - - ret = rtk_qos_portPriSelIndex_get(data->port, &Index); - if (ret != 0) - printk("rtk_qos_portPriSelIndex_set failed\n"); - else - printk("port%d belongs to table%d\n", data->port, Index); -} - -void rtk_hal_qos_set_port2pri(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - - ret = rtk_qos_portPri_set(data->port, data->qos_pri); - if (ret != 0) - printk("rtk_qos_portPri_set failed\n"); -} - -void rtk_hal_qos_get_port2pri(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_pri_t Int_pri; - - ret = rtk_qos_portPri_get(data->port, &Int_pri); - if (ret != 0) - printk("rtk_qos_portPri_set failed\n"); - else - printk("port%d priority = %d\n", data->port, Int_pri); -} - -void rtk_hal_qos_set_dscp2pri(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - - ret = rtk_qos_dscpPriRemap_set(data->qos_dscp, data->qos_pri); - if (ret != 0) - printk("rtk_qos_dscpPriRemap_set failed\n"); -} - -void rtk_hal_qos_get_dscp2pri(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_pri_t Int_pri; - - ret = rtk_qos_dscpPriRemap_get(data->qos_dscp, &Int_pri); - if (ret != 0) - printk("rtk_qos_dscpPriRemap_set failed\n"); - else - printk("dscp%d priority is %d\n", data->qos_dscp, Int_pri); -} - -void rtk_hal_qos_set_pri2queue(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_qos_pri2queue_t pri2qid; - - ret = rtk_qos_priMap_get(8, &pri2qid); - pri2qid.pri2queue[data->qos_queue_num] = data->qos_pri; - ret = rtk_qos_priMap_set(8, &pri2qid); - if (ret != 0) - printk("rtk_qos_priMap_set failed\n"); -} - -void rtk_hal_qos_get_pri2queue(struct ra_switch_ioctl_data *data) -{ - int i; - rtk_api_ret_t ret; - rtk_qos_pri2queue_t pri2qid; - - ret = rtk_qos_priMap_get(8, &pri2qid); - if (ret != 0) - printk("rtk_qos_priMap_get failed\n"); - else { - for (i = 0; i < 8; i++) - printk("pri2qid.pri2queue[%d] = %d\n", i, pri2qid.pri2queue[i]); - } -} - -void rtk_hal_qos_set_queue_weight(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_qos_queue_weights_t qweights; - - ret = rtk_qos_schedulingQueue_get(data->port, &qweights); - qweights.weights[data->qos_queue_num] = data->qos_weight; - ret = rtk_qos_schedulingQueue_set(data->port, &qweights); - if (ret != 0) - printk("rtk_qos_schedulingQueue_set failed\n"); -} - -void rtk_hal_qos_get_queue_weight(struct ra_switch_ioctl_data *data) -{ - int i; - rtk_api_ret_t ret; - rtk_qos_queue_weights_t qweights; - - ret = rtk_qos_schedulingQueue_get(data->port, &qweights); - if (ret != 0) - printk("rtk_qos_schedulingQueue_get failed\n"); - else { - printk("=== Port%d queue weight ===\n", data->port); - for (i = 0; i < 8; i++) - printk("qweights.weights[%d] = %d\n",i ,qweights.weights[i]); - } -} - -void rtk_hal_enable_igmpsnoop(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_portmask_t pmask; - - - ret = rtk_igmp_init(); - if (data->on_off == 1) { - RTK_PORTMASK_CLEAR(pmask); - RTK_PORTMASK_PORT_SET(pmask, EXT_PORT0); - ret |= rtk_igmp_static_router_port_set(&pmask); - ret |= rtk_igmp_protocol_set(UTP_PORT4, PROTOCOL_IGMPv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(UTP_PORT4, PROTOCOL_IGMPv2, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(UTP_PORT4, PROTOCOL_MLDv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(EXT_PORT1, PROTOCOL_IGMPv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(EXT_PORT1, PROTOCOL_IGMPv2, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(EXT_PORT1, PROTOCOL_MLDv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(UTP_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT1, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT2, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT3, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(EXT_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - - ret |= rtk_leaky_vlan_set(LEAKY_IPMULTICAST, ENABLED); - ret |= rtk_l2_ipMcastForwardRouterPort_set(DISABLED); - /* drop unknown multicast packets*/ - /* ret |= rtk_trap_unknownMcastPktAction_set(UTP_PORT4, MCAST_IPV4, MCAST_ACTION_DROP);*/ - } else { - RTK_PORTMASK_CLEAR(pmask); - RTK_PORTMASK_PORT_SET(pmask, EXT_PORT0); - RTK_PORTMASK_PORT_SET(pmask, EXT_PORT1); - ret |= rtk_igmp_protocol_set(UTP_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT1, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT2, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT3, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(EXT_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - - ret |= rtk_igmp_static_router_port_set(&pmask); - } - if(ret != RT_ERR_OK) - printk("enable switch igmpsnoop failed\n"); -} - -void rtk_hal_disable_igmpsnoop(void) -{ - if (rtk_igmp_state_set(DISABLED) != RT_ERR_OK) - printk("Disable IGMP SNOOPING failed\n"); -} - -rtk_api_ret_t rtk_port_phyTestMode_set(rtk_port_t port, rtk_port_phy_test_mode_t mode) -{ - rtk_uint32 data, regData, i; - rtk_api_ret_t retVal; - - RTK_CHK_PORT_IS_UTP(port); - - if(mode >= PHY_TEST_MODE_END) - return RT_ERR_INPUT; - - if( (mode == PHY_TEST_MODE_2) || (mode == PHY_TEST_MODE_3) ) - return RT_ERR_INPUT; - - if (PHY_TEST_MODE_NORMAL != mode) - { - /* Other port should be Normal mode */ - RTK_SCAN_ALL_LOG_PORT(i) - { - if(rtk_switch_isUtpPort(i) == RT_ERR_OK) - { - if(i != port) - { - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(i), 9, &data)) != RT_ERR_OK) - return retVal; - - if((data & 0xE000) != 0) - return RT_ERR_NOT_ALLOWED; - } - } - } - } - - if ((retVal = rtl8367c_getAsicPHYReg(rtk_switch_port_L2P_get(port), 9, &data)) != RT_ERR_OK) - return retVal; - - data &= ~0xE000; - data |= (mode << 13); - if ((retVal = rtl8367c_setAsicPHYReg(rtk_switch_port_L2P_get(port), 9, data)) != RT_ERR_OK) - return retVal; - - if (PHY_TEST_MODE_4 == mode) - { - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Data)) != RT_ERR_OK) - return retVal; - - if( (regData == 0x0276) || (regData == 0x0597) ) - { - if ((retVal = rtl8367c_setAsicPHYOCPReg(rtk_switch_port_L2P_get(port), 0xbcc2, 0xF4F4)) != RT_ERR_OK) - return retVal; - } - - if( (regData == 0x6367) ) - { - if ((retVal = rtl8367c_setAsicPHYOCPReg(rtk_switch_port_L2P_get(port), 0xa436, 0x80c1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPHYOCPReg(rtk_switch_port_L2P_get(port), 0xa438, 0xfe00)) != RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; -} - -void rtk_hal_set_phy_test_mode(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - - ret = rtk_port_phyTestMode_set(data->port, data->mode); - if (ret != RT_ERR_OK) - printk("rtk_port_phyTestMode_set failed\n"); - else - printk("set port%d in test mode %d.\n", data->port, data->mode); -} - -void rtk_hal_set_port_trunk(struct ra_switch_ioctl_data *data) -{ - - rtk_api_ret_t ret; - rtk_portmask_t member; - int i; - - RTK_PORTMASK_CLEAR(member); - for (i = 0; i < 4; i++) { - if (data->port_map & (1 << i)) - RTK_PORTMASK_PORT_SET(member, i); - } - - ret = rtk_trunk_port_set(TRUNK_GROUP0, &member); - if (ret != RT_ERR_OK) - printk("rtk_trunk_port_set failed\n"); - - ret = rtk_trunk_distributionAlgorithm_set(RTK_WHOLE_SYSTEM, 0x7F); - if (ret != RT_ERR_OK) - printk("rtk_trunk_distributionAlgorithm_set failed\n"); -} - -void rtk_hal_vlan_tag(struct ra_switch_ioctl_data *data) -{ - rtk_api_ret_t ret; - rtk_vlan_cfg_t vlan; - - ret = rtk_vlan_get(data->vid, &vlan); - if (ret != RT_ERR_OK) - printk("rtk_vlan_get failed\n"); - else { - if (data->on_off == 0) - RTK_PORTMASK_PORT_SET(vlan.untag, data->port); - else - RTK_PORTMASK_PORT_CLEAR(vlan.untag, data->port); - - ret = rtk_vlan_set(data->vid, &vlan); - if (ret != RT_ERR_OK) - printk("rtk_vlan_set failed\n"); - } -} - -void rtk_hal_vlan_mode(struct ra_switch_ioctl_data *data) -{ - rtk_vlan_cfg_t vlan1, vlan2; - rtk_api_ret_t ret; - - ret = rtk_vlan_get(1, &vlan1); - if (ret != RT_ERR_OK) - printk("rtk_vlan_get failed\n"); - - ret = rtk_vlan_get(2, &vlan2); - if (ret != RT_ERR_OK) - printk("rtk_vlan_get failed\n"); - - if (data->mode == 0) { //ivl - vlan1.ivl_en = 1; - vlan1.fid_msti = 0; - rtk_vlan_set(1, &vlan1); - vlan2.ivl_en = 1; - vlan2.fid_msti = 0; - rtk_vlan_set(2, &vlan2); - } else if(data->mode == 1) {//svl - vlan1.ivl_en = 0; - vlan1.fid_msti = 0; - rtk_vlan_set(1, &vlan1); - vlan2.ivl_en = 0; - vlan2.fid_msti = 1; - rtk_vlan_set(2, &vlan2); - } else - printk("mode not supported\n"); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtk_switch.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtk_switch.c deleted file mode 100644 index 0bb0db0776..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtk_switch.c +++ /dev/null @@ -1,1796 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76336 $ - * $Date: 2017-03-09 10:41:21 +0800 (週四, 09 三月 2017) $ - * - * Purpose : RTK switch high-level API - * Feature : Here is a list of all functions and variables in this module. - * - */ -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#if defined(FORCE_PROBE_RTL8367C) -static init_state_t init_state = INIT_COMPLETED; -#elif defined(FORCE_PROBE_RTL8370B) -static init_state_t init_state = INIT_COMPLETED; -#elif defined(FORCE_PROBE_RTL8364B) -static init_state_t init_state = INIT_COMPLETED; -#elif defined(FORCE_PROBE_RTL8363SC_VB) -static init_state_t init_state = INIT_COMPLETED; -#else -static init_state_t init_state = INIT_NOT_COMPLETED; -#endif - -#define AUTO_PROBE (!defined(FORCE_PROBE_RTL8367C) && !defined(FORCE_PROBE_RTL8370B) && !defined(FORCE_PROBE_RTL8364B) && !defined(FORCE_PROBE_RTL8363SC_VB)) - -#if (AUTO_PROBE || defined(FORCE_PROBE_RTL8367C)) -static rtk_switch_halCtrl_t rtl8367c_hal_Ctrl = -{ - /* Switch Chip */ - CHIP_RTL8367C, - - /* Logical to Physical */ - {0, 1, 2, 3, 4, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 6, 7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }, - - /* Physical to Logical */ - {UTP_PORT0, UTP_PORT1, UTP_PORT2, UTP_PORT3, UTP_PORT4, UNDEFINE_PORT, EXT_PORT0, EXT_PORT1, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT}, - - /* Port Type */ - {UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - EXT_PORT, EXT_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT}, - - /* PTP port */ - {1, 1, 1, 1, 1, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 }, - - /* Valid port mask */ - ( (0x1 << UTP_PORT0) | (0x1 << UTP_PORT1) | (0x1 << UTP_PORT2) | (0x1 << UTP_PORT3) | (0x1 << UTP_PORT4) | (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Valid UTP port mask */ - ( (0x1 << UTP_PORT0) | (0x1 << UTP_PORT1) | (0x1 << UTP_PORT2) | (0x1 << UTP_PORT3) | (0x1 << UTP_PORT4) ), - - /* Valid EXT port mask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Valid CPU port mask */ - 0x00, - - /* Minimum physical port number */ - 0, - - /* Maxmum physical port number */ - 7, - - /* Physical port mask */ - 0xDF, - - /* Combo Logical port ID */ - 4, - - /* HSG Logical port ID */ - EXT_PORT0, - - /* SGMII Logical portmask */ - (0x1 << EXT_PORT0), - - /* Max Meter ID */ - 31, - - /* MAX LUT Address Number */ - 2112, - - /* Trunk Group Mask */ - 0x03 -}; -#endif - -#if (AUTO_PROBE || defined(FORCE_PROBE_RTL8370B)) -static rtk_switch_halCtrl_t rtl8370b_hal_Ctrl = -{ - /* Switch Chip */ - CHIP_RTL8370B, - - /* Logical to Physical */ - {0, 1, 2, 3, 4, 5, 6, 7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 8, 9, 10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }, - - /* Physical to Logical */ - {UTP_PORT0, UTP_PORT1, UTP_PORT2, UTP_PORT3, UTP_PORT4, UTP_PORT5, UTP_PORT6, UTP_PORT7, - EXT_PORT0, EXT_PORT1, EXT_PORT2, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT}, - - /* Port Type */ - {UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, UTP_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - EXT_PORT, EXT_PORT, EXT_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT}, - - /* PTP port */ - {1, 1, 1, 1, 1, 1, 1, 1, - 0, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 }, - - /* Valid port mask */ - ( (0x1 << UTP_PORT0) | (0x1 << UTP_PORT1) | (0x1 << UTP_PORT2) | (0x1 << UTP_PORT3) | (0x1 << UTP_PORT4) | (0x1 << UTP_PORT5) | (0x1 << UTP_PORT6) | (0x1 << UTP_PORT7) | (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) | (0x1 << EXT_PORT2) ), - - /* Valid UTP port mask */ - ( (0x1 << UTP_PORT0) | (0x1 << UTP_PORT1) | (0x1 << UTP_PORT2) | (0x1 << UTP_PORT3) | (0x1 << UTP_PORT4) | (0x1 << UTP_PORT5) | (0x1 << UTP_PORT6) | (0x1 << UTP_PORT7) ), - - /* Valid EXT port mask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) | (0x1 << EXT_PORT2) ), - - /* Valid CPU port mask */ - (0x1 << EXT_PORT2), - - /* Minimum physical port number */ - 0, - - /* Maxmum physical port number */ - 10, - - /* Physical port mask */ - 0x7FF, - - /* Combo Logical port ID */ - 7, - - /* HSG Logical port ID */ - EXT_PORT1, - - /* SGMII Logical portmask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Max Meter ID */ - 63, - - /* MAX LUT Address Number 4096 + 64*/ - 4160, - - /* Trunk Group Mask */ - 0x07 -}; -#endif - -#if (AUTO_PROBE || defined(FORCE_PROBE_RTL8364B)) -static rtk_switch_halCtrl_t rtl8364b_hal_Ctrl = -{ - /* Switch Chip */ - CHIP_RTL8364B, - - /* Logical to Physical */ - {0xFF, 1, 0xFF, 3, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 6, 7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }, - - /* Physical to Logical */ - {UNDEFINE_PORT, UTP_PORT1, UNDEFINE_PORT, UTP_PORT3, UNDEFINE_PORT, UNDEFINE_PORT, EXT_PORT0, EXT_PORT1, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT}, - - /* Port Type */ - {UNKNOWN_PORT, UTP_PORT, UNKNOWN_PORT, UTP_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - EXT_PORT, EXT_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT}, - - /* PTP port */ - {0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 }, - - /* Valid port mask */ - ( (0x1 << UTP_PORT1) | (0x1 << UTP_PORT3) | (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Valid UTP port mask */ - ( (0x1 << UTP_PORT1) | (0x1 << UTP_PORT3) ), - - /* Valid EXT port mask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Valid CPU port mask */ - 0x00, - - /* Minimum physical port number */ - 0, - - /* Maxmum physical port number */ - 7, - - /* Physical port mask */ - 0xCA, - - /* Combo Logical port ID */ - 4, - - /* HSG Logical port ID */ - EXT_PORT0, - - /* SGMII Logical portmask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Max Meter ID */ - 32, - - /* MAX LUT Address Number */ - 2112, - - /* Trunk Group Mask */ - 0x01 -}; -#endif - -#if (AUTO_PROBE || defined(FORCE_PROBE_RTL8363SC_VB)) -static rtk_switch_halCtrl_t rtl8363sc_vb_hal_Ctrl = -{ - /* Switch Chip */ - CHIP_RTL8363SC_VB, - - /* Logical to Physical */ - {0xFF, 0xFF, 1, 3, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 6, 7, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }, - - /* Physical to Logical */ - {UNDEFINE_PORT, UTP_PORT2, UNDEFINE_PORT, UTP_PORT3, UNDEFINE_PORT, UNDEFINE_PORT, EXT_PORT0, EXT_PORT1, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, - UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT, UNDEFINE_PORT}, - - /* Port Type */ - {UNKNOWN_PORT, UNKNOWN_PORT, UTP_PORT, UTP_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - EXT_PORT, EXT_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, - UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT, UNKNOWN_PORT}, - - /* PTP port */ - {0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 }, - - /* Valid port mask */ - ( (0x1 << UTP_PORT2) | (0x1 << UTP_PORT3) | (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Valid UTP port mask */ - ( (0x1 << UTP_PORT2) | (0x1 << UTP_PORT3) ), - - /* Valid EXT port mask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Valid CPU port mask */ - 0x00, - - /* Minimum physical port number */ - 0, - - /* Maxmum physical port number */ - 7, - - /* Physical port mask */ - 0xCA, - - /* Combo Logical port ID */ - 4, - - /* HSG Logical port ID */ - EXT_PORT0, - - /* SGMII Logical portmask */ - ( (0x1 << EXT_PORT0) | (0x1 << EXT_PORT1) ), - - /* Max Meter ID */ - 32, - - /* MAX LUT Address Number */ - 2112, - - /* Trunk Group Mask */ - 0x01 -}; -#endif - -#if defined(FORCE_PROBE_RTL8367C) -static rtk_switch_halCtrl_t *halCtrl = &rtl8367c_hal_Ctrl; -#elif defined(FORCE_PROBE_RTL8370B) -static rtk_switch_halCtrl_t *halCtrl = &rtl8370b_hal_Ctrl; -#elif defined(FORCE_PROBE_RTL8364B) -static rtk_switch_halCtrl_t *halCtrl = &rtl8364b_hal_Ctrl; -#elif defined(FORCE_PROBE_RTL8363SC_VB) -static rtk_switch_halCtrl_t *halCtrl = &rtl8363sc_vb_hal_Ctrl; -#else -static rtk_switch_halCtrl_t *halCtrl = NULL; -#endif - -static rtk_uint32 PatchChipData[210][2] = -{ - {0xa436, 0x8028}, {0xa438, 0x6800}, {0xb82e, 0x0001}, {0xa436, 0xb820}, {0xa438, 0x0090}, {0xa436, 0xa012}, {0xa438, 0x0000}, {0xa436, 0xa014}, {0xa438, 0x2c04}, {0xa438, 0x2c6c}, - {0xa438, 0x2c75}, {0xa438, 0x2c77}, {0xa438, 0x1414}, {0xa438, 0x1579}, {0xa438, 0x1536}, {0xa438, 0xc432}, {0xa438, 0x32c0}, {0xa438, 0x42d6}, {0xa438, 0x32b5}, {0xa438, 0x003e}, - {0xa438, 0x614c}, {0xa438, 0x1569}, {0xa438, 0xd705}, {0xa438, 0x318c}, {0xa438, 0x42d6}, {0xa438, 0xd702}, {0xa438, 0x31ef}, {0xa438, 0x42d6}, {0xa438, 0x629c}, {0xa438, 0x2c04}, - {0xa438, 0x653c}, {0xa438, 0x422a}, {0xa438, 0x5d83}, {0xa438, 0xd06a}, {0xa438, 0xd1b0}, {0xa438, 0x1536}, {0xa438, 0xc43a}, {0xa438, 0x32c0}, {0xa438, 0x42d6}, {0xa438, 0x32b5}, - {0xa438, 0x003e}, {0xa438, 0x314a}, {0xa438, 0x42fe}, {0xa438, 0x337b}, {0xa438, 0x02d6}, {0xa438, 0x3063}, {0xa438, 0x0c1b}, {0xa438, 0x22fe}, {0xa438, 0xc435}, {0xa438, 0xd0be}, - {0xa438, 0xd1f7}, {0xa438, 0xe0f0}, {0xa438, 0x1a40}, {0xa438, 0xa320}, {0xa438, 0xd702}, {0xa438, 0x154a}, {0xa438, 0xc434}, {0xa438, 0x32c0}, {0xa438, 0x42d6}, {0xa438, 0x32b5}, - {0xa438, 0x003e}, {0xa438, 0x60ec}, {0xa438, 0x1569}, {0xa438, 0xd705}, {0xa438, 0x619f}, {0xa438, 0xd702}, {0xa438, 0x414f}, {0xa438, 0x2c2e}, {0xa438, 0x610a}, {0xa438, 0xd705}, - {0xa438, 0x5e1f}, {0xa438, 0xc43f}, {0xa438, 0xc88b}, {0xa438, 0xd702}, {0xa438, 0x7fe0}, {0xa438, 0x22f3}, {0xa438, 0xd0a0}, {0xa438, 0xd1b2}, {0xa438, 0xd0c3}, {0xa438, 0xd1c3}, - {0xa438, 0x8d01}, {0xa438, 0x1536}, {0xa438, 0xc438}, {0xa438, 0xe0f0}, {0xa438, 0x1a80}, {0xa438, 0xd706}, {0xa438, 0x60c0}, {0xa438, 0xd710}, {0xa438, 0x409e}, {0xa438, 0xa804}, - {0xa438, 0xad01}, {0xa438, 0x8804}, {0xa438, 0xd702}, {0xa438, 0x32c0}, {0xa438, 0x42d6}, {0xa438, 0x32b5}, {0xa438, 0x003e}, {0xa438, 0x405b}, {0xa438, 0x1576}, {0xa438, 0x7c9c}, - {0xa438, 0x60ec}, {0xa438, 0x1569}, {0xa438, 0xd702}, {0xa438, 0x5d43}, {0xa438, 0x31ef}, {0xa438, 0x02fe}, {0xa438, 0x22d6}, {0xa438, 0x590a}, {0xa438, 0xd706}, {0xa438, 0x5c80}, - {0xa438, 0xd702}, {0xa438, 0x5c44}, {0xa438, 0x3063}, {0xa438, 0x02d6}, {0xa438, 0x5be2}, {0xa438, 0x22fb}, {0xa438, 0xa240}, {0xa438, 0xa104}, {0xa438, 0x8c03}, {0xa438, 0x8178}, - {0xa438, 0xd701}, {0xa438, 0x31ad}, {0xa438, 0x4917}, {0xa438, 0x8102}, {0xa438, 0x2917}, {0xa438, 0xc302}, {0xa438, 0x268a}, {0xa436, 0xA01A}, {0xa438, 0x0000}, {0xa436, 0xA006}, - {0xa438, 0x0fff}, {0xa436, 0xA004}, {0xa438, 0x0689}, {0xa436, 0xA002}, {0xa438, 0x0911}, {0xa436, 0xA000}, {0xa438, 0x7302}, {0xa436, 0xB820}, {0xa438, 0x0010}, {0xa436, 0x8412}, - {0xa438, 0xaf84}, {0xa438, 0x1eaf}, {0xa438, 0x8427}, {0xa438, 0xaf84}, {0xa438, 0x27af}, {0xa438, 0x8427}, {0xa438, 0x0251}, {0xa438, 0x6802}, {0xa438, 0x8427}, {0xa438, 0xaf04}, - {0xa438, 0x0af8}, {0xa438, 0xf9bf}, {0xa438, 0x5581}, {0xa438, 0x0255}, {0xa438, 0x27ef}, {0xa438, 0x310d}, {0xa438, 0x345b}, {0xa438, 0x0fa3}, {0xa438, 0x032a}, {0xa438, 0xe087}, - {0xa438, 0xffac}, {0xa438, 0x2040}, {0xa438, 0xbf56}, {0xa438, 0x7402}, {0xa438, 0x5527}, {0xa438, 0xef31}, {0xa438, 0xef20}, {0xa438, 0xe787}, {0xa438, 0xfee6}, {0xa438, 0x87fd}, - {0xa438, 0xd488}, {0xa438, 0x88bf}, {0xa438, 0x5674}, {0xa438, 0x0254}, {0xa438, 0xe3e0}, {0xa438, 0x87ff}, {0xa438, 0xf720}, {0xa438, 0xe487}, {0xa438, 0xffaf}, {0xa438, 0x847e}, - {0xa438, 0xe087}, {0xa438, 0xffad}, {0xa438, 0x2016}, {0xa438, 0xe387}, {0xa438, 0xfee2}, {0xa438, 0x87fd}, {0xa438, 0xef45}, {0xa438, 0xbf56}, {0xa438, 0x7402}, {0xa438, 0x54e3}, - {0xa438, 0xe087}, {0xa438, 0xfff6}, {0xa438, 0x20e4}, {0xa438, 0x87ff}, {0xa438, 0xfdfc}, {0xa438, 0x0400}, {0xa436, 0xb818}, {0xa438, 0x0407}, {0xa436, 0xb81a}, {0xa438, 0xfffd}, - {0xa436, 0xb81c}, {0xa438, 0xfffd}, {0xa436, 0xb81e}, {0xa438, 0xfffd}, {0xa436, 0xb832}, {0xa438, 0x0001}, {0xb820, 0x0000}, {0xb82e, 0x0000}, {0xa436, 0x8028}, {0xa438, 0x0000} -}; - -static rtk_api_ret_t _rtk_switch_init_8367c(void) -{ - rtk_port_t port; - rtk_uint32 retVal; - rtk_uint32 regData; - rtk_uint32 regValue; - - if( (retVal = rtl8367c_setAsicReg(0x13c2, 0x0249)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicReg(0x1301, ®Value)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(0x13c2, 0x0000)) != RT_ERR_OK) - return retVal; - - RTK_SCAN_ALL_LOG_PORT(port) - { - if(rtk_switch_isUtpPort(port) == RT_ERR_OK) - { - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_PORT0_EEECFG + (0x20 * port), RTL8367C_PORT0_EEECFG_EEE_100M_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_PORT0_EEECFG + (0x20 * port), RTL8367C_PORT0_EEECFG_EEE_GIGA_500M_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_PORT0_EEECFG + (0x20 * port), RTL8367C_PORT0_EEECFG_EEE_TX_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_PORT0_EEECFG + (0x20 * port), RTL8367C_PORT0_EEECFG_EEE_RX_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xA428, ®Data)) != RT_ERR_OK) - return retVal; - - regData &= ~(0x0200); - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA428, regData)) != RT_ERR_OK) - return retVal; - - if((regValue & 0x00F0) == 0x00A0) - { - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xA5D0, ®Data)) != RT_ERR_OK) - return retVal; - - regData |= 0x0006; - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA5D0, regData)) != RT_ERR_OK) - return retVal; - } - } - } - - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_UTP_FIB_DET, 0x15BB)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1303, 0x06D6)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1304, 0x0700)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13E2, 0x003F)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13F9, 0x0090)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x121e, 0x03CA)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1233, 0x0352)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1237, 0x00a0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x123a, 0x0030)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1239, 0x0084)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x0301, 0x1000)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1349, 0x001F)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x18e0, 0, 0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x122b, 14, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1305, 0xC000, 3)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -static rtk_api_ret_t _rtk_switch_init_8370b(void) -{ - ret_t retVal; - rtk_uint32 regData, tmp = 0; - rtk_uint32 i, prf, counter; - rtk_uint32 long_link[8] = {0x0210, 0x03e8, 0x0218, 0x03f0, 0x0220, 0x03f8, 0x0208, 0x03e0 }; - - if((retVal = rtl8367c_setAsicRegBits(0x1205, 0x0300, 3)) != RT_ERR_OK) - return retVal; - - - for(i=0; i<8; i++) - { - if ((retVal = rtl8367c_getAsicPHYOCPReg(i, 0xa420, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData & 0x7 ; - if(tmp == 0x3) - { - prf = 1; - if((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xb83e, 0x6fa9)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xb840, 0xa9)) != RT_ERR_OK) - return retVal; - for(counter = 0; counter < 10000; counter++); //delay - - if ((retVal = rtl8367c_getAsicPHYOCPReg(i, 0xb820, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData | 0x10; - if ((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xb820, tmp)) != RT_ERR_OK) - return retVal; - for(counter = 0; counter < 10000; counter++); //delay - counter = 0; - do{ - counter = counter + 1; - if ((retVal = rtl8367c_getAsicPHYOCPReg(i, 0xb800, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData & 0x40; - if(tmp != 0) - break; - } while (counter < 20); //Wait for patch ready = 1... - } - } - if ((retVal = rtl8367c_getAsicReg(0x1d01, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData; - tmp = tmp | 0x3BE0; /*Broadcast port enable*/ - tmp = tmp & 0xFFE0; /*Phy_id = 0 */ - if((retVal = rtl8367c_setAsicReg(0x1d01, tmp)) != RT_ERR_OK) - return retVal; - - for(i=0;i < 210; i++) - { - if((retVal = rtl8367c_setAsicPHYOCPReg(0, PatchChipData[i][0], PatchChipData[i][1])) != RT_ERR_OK) - return retVal; - } - - if((retVal = rtl8367c_setAsicReg(0x1d01, regData)) != RT_ERR_OK) - return retVal; - - for(i=0; i < 8; i++) - { - if((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xa4b4, long_link[i])) != RT_ERR_OK) - return retVal; - } - - if (prf == 0x1) - { - for(i=0; i<8; i++) - { - if ((retVal = rtl8367c_getAsicPHYOCPReg(i, 0xb820, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData & 0xFFEF; - if ((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xb820, tmp)) != RT_ERR_OK) - return retVal; - - for(counter = 0; counter < 10000; counter++); //delay - - counter = 0; - do{ - counter = counter + 1; - if ((retVal = rtl8367c_getAsicPHYOCPReg(i, 0xb800, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData & 0x40; - if( tmp == 0 ) - break; - } while (counter < 20); //Wait for patch ready = 1... - if ((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xb83e, 0x6f48)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xb840, 0xfa)) != RT_ERR_OK) - return retVal; - } - } - - /*Check phy link status*/ - for(i=0; i<8; i++) - { - if ((retVal = rtl8367c_getAsicPHYOCPReg(i, 0xa400, ®Data)) != RT_ERR_OK) - return retVal; - tmp = regData & 0x800; - if(tmp == 0x0) - { - tmp = regData | 0x200; - if ((retVal = rtl8367c_setAsicPHYOCPReg(i, 0xa400, tmp)) != RT_ERR_OK) - return retVal; - } - } - - for(counter = 0; counter < 10000; counter++); //delay - - return RT_ERR_OK; -} - -static rtk_api_ret_t _rtk_switch_init_8364b(void) -{ - ret_t retVal; - rtk_uint32 regData; - - /*enable EEE, include mac & phy*/ - - if ((retVal = rtl8367c_setAsicRegBits(0x38, 0x300, 3)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x78, 0x300, 3)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0xd8, 0x300, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0xf8, 0x300, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPHYOCPReg(1, 0xa5d0, 6)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicPHYOCPReg(3, 0xa5d0, 6)) != RT_ERR_OK) - return retVal; - - /*PAD para*/ - - /*EXT1 PAD Para*/ - if ((retVal = rtl8367c_getAsicReg(0x1303, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFFFFFFE; - regData |= 0x250; - if((retVal = rtl8367c_setAsicReg(0x1303, regData)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1304, 0x7000, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1304, 0x700, 7)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x38, 0)) != RT_ERR_OK) - return retVal; - - /*EXT2 PAD Para*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 10, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x13E2, 0x1ff, 0x26)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x1c0, 0)) != RT_ERR_OK) - return retVal; - - - /*SDS PATCH*/ - /*SP_CFG_EN_LINK_FIB1G*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®Data)) != RT_ERR_OK) - return retVal; - regData |= 0x4; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, regData)) != RT_ERR_OK) - return retVal; - - /*FIB100 Down-speed*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 1, 0, ®Data)) != RT_ERR_OK) - return retVal; - regData |= 0x20; - if((retVal = rtl8367c_setAsicSdsReg(0,1,0, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -static rtk_api_ret_t _rtk_switch_init_8363sc_vb(void) -{ - - ret_t retVal; - rtk_uint32 regData; - - /*enable EEE, include mac & phy*/ - - if ((retVal = rtl8367c_setAsicRegBits(0x38, 0x300, 3)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x78, 0x300, 3)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0xd8, 0x300, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0xf8, 0x300, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPHYOCPReg(1, 0xa5d0, 6)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicPHYOCPReg(3, 0xa5d0, 6)) != RT_ERR_OK) - return retVal; - - /*PAD para*/ - - /*EXT1 PAD Para*/ - if ((retVal = rtl8367c_getAsicReg(0x1303, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFFFFFFE; - regData |= 0x250; - if((retVal = rtl8367c_setAsicReg(0x1303, regData)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1304, 0x7000, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1304, 0x700, 7)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x38, 0)) != RT_ERR_OK) - return retVal; - - /*EXT2 PAD Para*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 10, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x13E2, 0x1ff, 0x26)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x1c0, 0)) != RT_ERR_OK) - return retVal; - - - /*SDS PATCH*/ - /*SP_CFG_EN_LINK_FIB1G*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®Data)) != RT_ERR_OK) - return retVal; - regData |= 0x4; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, regData)) != RT_ERR_OK) - return retVal; - - /*FIB100 Down-speed*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 1, 0, ®Data)) != RT_ERR_OK) - return retVal; - regData |= 0x20; - if((retVal = rtl8367c_setAsicSdsReg(0,1,0, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_probe - * Description: - * Probe switch - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Switch probed - * RT_ERR_FAILED - Switch Unprobed. - * Note: - * - */ -rtk_api_ret_t rtk_switch_probe(switch_chip_t *pSwitchChip) -{ -#if defined(FORCE_PROBE_RTL8367C) - - *pSwitchChip = CHIP_RTL8367C; - halCtrl = &rtl8367c_hal_Ctrl; - -#elif defined(FORCE_PROBE_RTL8370B) - - *pSwitchChip = CHIP_RTL8370B; - halCtrl = &rtl8370b_hal_Ctrl; - -#elif defined(FORCE_PROBE_RTL8364B) - - *pSwitchChip = CHIP_RTL8364B; - halCtrl = &rtl8364b_hal_Ctrl; - -#elif defined(FORCE_PROBE_RTL8363SC_VB) - - *pSwitchChip = CHIP_RTL8363SC_VB; - halCtrl = &rtl8363sc_vb_hal_Ctrl; - -#else - rtk_uint32 retVal; - rtk_uint32 data, regValue; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, &data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1301, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (data) - { - case 0x0276: - case 0x0597: - case 0x6367: - *pSwitchChip = CHIP_RTL8367C; - halCtrl = &rtl8367c_hal_Ctrl; - break; - case 0x0652: - case 0x6368: - *pSwitchChip = CHIP_RTL8370B; - halCtrl = &rtl8370b_hal_Ctrl; - break; - case 0x0801: - case 0x6511: - if( (regValue & 0x00F0) == 0x0080) - { - *pSwitchChip = CHIP_RTL8363SC_VB; - halCtrl = &rtl8363sc_vb_hal_Ctrl; - } - else - { - *pSwitchChip = CHIP_RTL8364B; - halCtrl = &rtl8364b_hal_Ctrl; - } - break; - default: - return RT_ERR_FAILED; - } -#endif - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_initialState_set - * Description: - * Set initial status - * Input: - * state - Initial state; - * Output: - * None - * Return: - * RT_ERR_OK - Initialized - * RT_ERR_FAILED - Uninitialized - * Note: - * - */ -rtk_api_ret_t rtk_switch_initialState_set(init_state_t state) -{ - if(state >= INIT_STATE_END) - return RT_ERR_FAILED; - - init_state = state; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_initialState_get - * Description: - * Get initial status - * Input: - * None - * Output: - * None - * Return: - * INIT_COMPLETED - Initialized - * INIT_NOT_COMPLETED - Uninitialized - * Note: - * - */ -init_state_t rtk_switch_initialState_get(void) -{ - return init_state; -} - -/* Function Name: - * rtk_switch_logicalPortCheck - * Description: - * Check logical port ID. - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is correct - * RT_ERR_FAILED - Port ID is not correct - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_logicalPortCheck(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if(halCtrl->l2p_port[logicalPort] == 0xFF) - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_isUtpPort - * Description: - * Check is logical port a UTP port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a UTP port - * RT_ERR_FAILED - Port ID is not a UTP port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isUtpPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if(halCtrl->log_port_type[logicalPort] == UTP_PORT) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_switch_isExtPort - * Description: - * Check is logical port a Extension port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a EXT port - * RT_ERR_FAILED - Port ID is not a EXT port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isExtPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if(halCtrl->log_port_type[logicalPort] == EXT_PORT) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - - -/* Function Name: - * rtk_switch_isHsgPort - * Description: - * Check is logical port a HSG port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a HSG port - * RT_ERR_FAILED - Port ID is not a HSG port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isHsgPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if(logicalPort == halCtrl->hsg_logical_port) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_switch_isSgmiiPort - * Description: - * Check is logical port a SGMII port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a SGMII port - * RT_ERR_FAILED - Port ID is not a SGMII port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isSgmiiPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if( ((0x01 << logicalPort) & halCtrl->sg_logical_portmask) != 0) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_switch_isCPUPort - * Description: - * Check is logical port a CPU port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a CPU port - * RT_ERR_FAILED - Port ID is not a CPU port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isCPUPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if( ((0x01 << logicalPort) & halCtrl->valid_cpu_portmask) != 0) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_switch_isComboPort - * Description: - * Check is logical port a Combo port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a combo port - * RT_ERR_FAILED - Port ID is not a combo port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isComboPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if(halCtrl->combo_logical_port == logicalPort) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_switch_ComboPort_get - * Description: - * Get Combo port ID - * Input: - * None - * Output: - * None - * Return: - * Port ID of combo port - * Note: - * - */ -rtk_uint32 rtk_switch_ComboPort_get(void) -{ - return halCtrl->combo_logical_port; -} - -/* Function Name: - * rtk_switch_isPtpPort - * Description: - * Check is logical port a PTP port - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * RT_ERR_OK - Port ID is a PTP port - * RT_ERR_FAILED - Port ID is not a PTP port - * RT_ERR_NOT_INIT - Not Initialize - * Note: - * - */ -rtk_api_ret_t rtk_switch_isPtpPort(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return RT_ERR_FAILED; - - if(halCtrl->ptp_port[logicalPort] == 1) - return RT_ERR_OK; - else - return RT_ERR_FAILED; -} - -/* Function Name: - * rtk_switch_port_L2P_get - * Description: - * Get physical port ID - * Input: - * logicalPort - logical port ID - * Output: - * None - * Return: - * Physical port ID - * Note: - * - */ -rtk_uint32 rtk_switch_port_L2P_get(rtk_port_t logicalPort) -{ - if(init_state != INIT_COMPLETED) - return UNDEFINE_PHY_PORT; - - if(logicalPort >= RTK_SWITCH_PORT_NUM) - return UNDEFINE_PHY_PORT; - - return (halCtrl->l2p_port[logicalPort]); -} - -/* Function Name: - * rtk_switch_port_P2L_get - * Description: - * Get logical port ID - * Input: - * physicalPort - physical port ID - * Output: - * None - * Return: - * logical port ID - * Note: - * - */ -rtk_port_t rtk_switch_port_P2L_get(rtk_uint32 physicalPort) -{ - if(init_state != INIT_COMPLETED) - return UNDEFINE_PORT; - - if(physicalPort >= RTK_SWITCH_PORT_NUM) - return UNDEFINE_PORT; - - return (halCtrl->p2l_port[physicalPort]); -} - -/* Function Name: - * rtk_switch_isPortMaskValid - * Description: - * Check portmask is valid or not - * Input: - * pPmask - logical port mask - * Output: - * None - * Return: - * RT_ERR_OK - port mask is valid - * RT_ERR_FAILED - port mask is not valid - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_switch_isPortMaskValid(rtk_portmask_t *pPmask) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(NULL == pPmask) - return RT_ERR_NULL_POINTER; - - if( (pPmask->bits[0] | halCtrl->valid_portmask) != halCtrl->valid_portmask ) - return RT_ERR_FAILED; - else - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_isPortMaskUtp - * Description: - * Check all ports in portmask are only UTP port - * Input: - * pPmask - logical port mask - * Output: - * None - * Return: - * RT_ERR_OK - Only UTP port in port mask - * RT_ERR_FAILED - Not only UTP port in port mask - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_switch_isPortMaskUtp(rtk_portmask_t *pPmask) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(NULL == pPmask) - return RT_ERR_NULL_POINTER; - - if( (pPmask->bits[0] | halCtrl->valid_utp_portmask) != halCtrl->valid_utp_portmask ) - return RT_ERR_FAILED; - else - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_isPortMaskExt - * Description: - * Check all ports in portmask are only EXT port - * Input: - * pPmask - logical port mask - * Output: - * None - * Return: - * RT_ERR_OK - Only EXT port in port mask - * RT_ERR_FAILED - Not only EXT port in port mask - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_switch_isPortMaskExt(rtk_portmask_t *pPmask) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(NULL == pPmask) - return RT_ERR_NULL_POINTER; - - if( (pPmask->bits[0] | halCtrl->valid_ext_portmask) != halCtrl->valid_ext_portmask ) - return RT_ERR_FAILED; - else - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_portmask_L2P_get - * Description: - * Get physicl portmask from logical portmask - * Input: - * pLogicalPmask - logical port mask - * Output: - * pPhysicalPortmask - physical port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_PORT_MASK - Error port mask - * Note: - * - */ -rtk_api_ret_t rtk_switch_portmask_L2P_get(rtk_portmask_t *pLogicalPmask, rtk_uint32 *pPhysicalPortmask) -{ - rtk_uint32 log_port, phy_port; - - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(NULL == pLogicalPmask) - return RT_ERR_NULL_POINTER; - - if(NULL == pPhysicalPortmask) - return RT_ERR_NULL_POINTER; - - if(rtk_switch_isPortMaskValid(pLogicalPmask) != RT_ERR_OK) - return RT_ERR_PORT_MASK; - - /* reset physical port mask */ - *pPhysicalPortmask = 0; - - RTK_PORTMASK_SCAN((*pLogicalPmask), log_port) - { - phy_port = rtk_switch_port_L2P_get((rtk_port_t)log_port); - *pPhysicalPortmask |= (0x0001 << phy_port); - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_portmask_P2L_get - * Description: - * Get logical portmask from physical portmask - * Input: - * physicalPortmask - physical port mask - * Output: - * pLogicalPmask - logical port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * RT_ERR_PORT_MASK - Error port mask - * Note: - * - */ -rtk_api_ret_t rtk_switch_portmask_P2L_get(rtk_uint32 physicalPortmask, rtk_portmask_t *pLogicalPmask) -{ - rtk_uint32 log_port, phy_port; - - if(init_state != INIT_COMPLETED) - return RT_ERR_NOT_INIT; - - if(NULL == pLogicalPmask) - return RT_ERR_NULL_POINTER; - - RTK_PORTMASK_CLEAR(*pLogicalPmask); - - for(phy_port = halCtrl->min_phy_port; phy_port <= halCtrl->max_phy_port; phy_port++) - { - if(physicalPortmask & (0x0001 << phy_port)) - { - log_port = rtk_switch_port_P2L_get(phy_port); - if(log_port != UNDEFINE_PORT) - { - RTK_PORTMASK_PORT_SET(*pLogicalPmask, log_port); - } - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_phyPortMask_get - * Description: - * Get physical portmask - * Input: - * None - * Output: - * None - * Return: - * 0x00 - Not Initialize - * Other value - Physical port mask - * Note: - * - */ -rtk_uint32 rtk_switch_phyPortMask_get(void) -{ - if(init_state != INIT_COMPLETED) - return 0x00; /* No port in portmask */ - - return (halCtrl->phy_portmask); -} - -/* Function Name: - * rtk_switch_logPortMask_get - * Description: - * Get Logical portmask - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_NOT_INIT - Not Initialize - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_switch_logPortMask_get(rtk_portmask_t *pPortmask) -{ - if(init_state != INIT_COMPLETED) - return RT_ERR_FAILED; - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - pPortmask->bits[0] = halCtrl->valid_portmask; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_init - * Description: - * Set chip to default configuration enviroment - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can set chip registers to default configuration for different release chip model. - */ -rtk_api_ret_t rtk_switch_init(void) -{ - rtk_uint32 retVal; - rtl8367c_rma_t rmaCfg; - switch_chip_t switchChip; - - /* probe switch */ - if((retVal = rtk_switch_probe(&switchChip)) != RT_ERR_OK) - return retVal; - - /* Set initial state */ - - if((retVal = rtk_switch_initialState_set(INIT_COMPLETED)) != RT_ERR_OK) - return retVal; - - /* Initial */ - switch(switchChip) - { - case CHIP_RTL8367C: - if((retVal = _rtk_switch_init_8367c()) != RT_ERR_OK) - return retVal; - break; - case CHIP_RTL8370B: - if((retVal = _rtk_switch_init_8370b()) != RT_ERR_OK) - return retVal; - break; - case CHIP_RTL8364B: - if((retVal = _rtk_switch_init_8364b()) != RT_ERR_OK) - return retVal; - break; - case CHIP_RTL8363SC_VB: - if((retVal = _rtk_switch_init_8363sc_vb()) != RT_ERR_OK) - return retVal; - break; - default: - return RT_ERR_CHIP_NOT_FOUND; - } - - /* Set Old max packet length to 16K */ - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_MAX_LENGTH_LIMINT_IPG, RTL8367C_MAX_LENTH_CTRL_MASK, 3)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_MAX_LEN_RX_TX, RTL8367C_MAX_LEN_RX_TX_MASK, 3)) != RT_ERR_OK) - return retVal; - - /* ACL Mode */ - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_ACL_ACCESS_MODE, RTL8367C_ACL_ACCESS_MODE_MASK, 1)) != RT_ERR_OK) - return retVal; - - /* Max rate */ - if((retVal = rtk_rate_igrBandwidthCtrlRate_set(halCtrl->hsg_logical_port, RTL8367C_QOS_RATE_INPUT_MAX_HSG, DISABLED, ENABLED)) != RT_ERR_OK) - return retVal; - - if((retVal = rtk_rate_egrBandwidthCtrlRate_set(halCtrl->hsg_logical_port, RTL8367C_QOS_RATE_INPUT_MAX_HSG, ENABLED)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x03fa, 0x0007)) != RT_ERR_OK) - return retVal; - - /* Change unknown DA to per port setting */ - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_PORT_SECURIT_CTRL_REG, RTL8367C_UNKNOWN_UNICAST_DA_BEHAVE_MASK, 3)) != RT_ERR_OK) - return retVal; - - /* LUT lookup OP = 1 */ - if ((retVal = rtl8367c_setAsicLutIpLookupMethod(1))!=RT_ERR_OK) - return retVal; - - /* Set RMA */ - rmaCfg.portiso_leaky = 0; - rmaCfg.vlan_leaky = 0; - rmaCfg.keep_format = 0; - rmaCfg.trap_priority = 0; - rmaCfg.discard_storm_filter = 0; - rmaCfg.operation = 0; - if ((retVal = rtl8367c_setAsicRma(2, &rmaCfg))!=RT_ERR_OK) - return retVal; - - /* Enable TX Mirror isolation leaky */ - if ((retVal = rtl8367c_setAsicPortMirrorIsolationTxLeaky(ENABLED)) != RT_ERR_OK) - return retVal; - - /* INT EN */ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IO_MISC_FUNC, RTL8367C_INT_EN_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_portMaxPktLen_set - * Description: - * Set Max packet length - * Input: - * port - Port ID - * speed - Speed - * cfgId - Configuration ID - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -rtk_api_ret_t rtk_switch_portMaxPktLen_set(rtk_port_t port, rtk_switch_maxPktLen_linkSpeed_t speed, rtk_uint32 cfgId) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(speed >= MAXPKTLEN_LINK_SPEED_END) - return RT_ERR_INPUT; - - if(cfgId > MAXPKTLEN_CFG_ID_MAX) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_setAsicMaxLength(rtk_switch_port_L2P_get(port), (rtk_uint32)speed, cfgId)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_portMaxPktLen_get - * Description: - * Get Max packet length - * Input: - * port - Port ID - * speed - Speed - * Output: - * pCfgId - Configuration ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -rtk_api_ret_t rtk_switch_portMaxPktLen_get(rtk_port_t port, rtk_switch_maxPktLen_linkSpeed_t speed, rtk_uint32 *pCfgId) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(speed >= MAXPKTLEN_LINK_SPEED_END) - return RT_ERR_INPUT; - - if(NULL == pCfgId) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicMaxLength(rtk_switch_port_L2P_get(port), (rtk_uint32)speed, pCfgId)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_maxPktLenCfg_set - * Description: - * Set Max packet length configuration - * Input: - * cfgId - Configuration ID - * pktLen - Max packet length - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -rtk_api_ret_t rtk_switch_maxPktLenCfg_set(rtk_uint32 cfgId, rtk_uint32 pktLen) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(cfgId > MAXPKTLEN_CFG_ID_MAX) - return RT_ERR_INPUT; - - if(pktLen > RTK_SWITCH_MAX_PKTLEN) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_setAsicMaxLengthCfg(cfgId, pktLen)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_maxPktLenCfg_get - * Description: - * Get Max packet length configuration - * Input: - * cfgId - Configuration ID - * pPktLen - Max packet length - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - */ -rtk_api_ret_t rtk_switch_maxPktLenCfg_get(rtk_uint32 cfgId, rtk_uint32 *pPktLen) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(cfgId > MAXPKTLEN_CFG_ID_MAX) - return RT_ERR_INPUT; - - if(NULL == pPktLen) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicMaxLengthCfg(cfgId, pPktLen)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_greenEthernet_set - * Description: - * Set all Ports Green Ethernet state. - * Input: - * enable - Green Ethernet state. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * This API can set all Ports Green Ethernet state. - * The configuration is as following: - * - DISABLE - * - ENABLE - */ -rtk_api_ret_t rtk_switch_greenEthernet_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - RTK_SCAN_ALL_LOG_PORT(port) - { - if(rtk_switch_isUtpPort(port) == RT_ERR_OK) - { - if ((retVal = rtl8367c_setAsicPowerSaving(rtk_switch_port_L2P_get(port),enable))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicGreenEthernet(rtk_switch_port_L2P_get(port), enable))!=RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_greenEthernet_get - * Description: - * Get all Ports Green Ethernet state. - * Input: - * None - * Output: - * pEnable - Green Ethernet state. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API can get Green Ethernet state. - */ -rtk_api_ret_t rtk_switch_greenEthernet_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 port; - rtk_uint32 state; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - RTK_SCAN_ALL_LOG_PORT(port) - { - if(rtk_switch_isUtpPort(port) == RT_ERR_OK) - { - if ((retVal = rtl8367c_getAsicPowerSaving(rtk_switch_port_L2P_get(port), &state))!=RT_ERR_OK) - return retVal; - - if(state == DISABLED) - { - *pEnable = DISABLED; - return RT_ERR_OK; - } - - if ((retVal = rtl8367c_getAsicGreenEthernet(rtk_switch_port_L2P_get(port), &state))!=RT_ERR_OK) - return retVal; - - if(state == DISABLED) - { - *pEnable = DISABLED; - return RT_ERR_OK; - } - } - } - - *pEnable = ENABLED; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_switch_maxLogicalPort_get - * Description: - * Get Max logical port ID - * Input: - * None - * Output: - * None - * Return: - * Max logical port - * Note: - * This API can get max logical port - */ -rtk_port_t rtk_switch_maxLogicalPort_get(void) -{ - rtk_port_t port, maxLogicalPort = 0; - - /* Check initialization state */ - if(rtk_switch_initialState_get() != INIT_COMPLETED) - { - return UNDEFINE_PORT; - } - - for(port = 0; port < RTK_SWITCH_PORT_NUM; port++) - { - if( (halCtrl->log_port_type[port] == UTP_PORT) || (halCtrl->log_port_type[port] == EXT_PORT) ) - maxLogicalPort = port; - } - - return maxLogicalPort; -} - -/* Function Name: - * rtk_switch_maxMeterId_get - * Description: - * Get Max Meter ID - * Input: - * None - * Output: - * None - * Return: - * 0x00 - Not Initialize - * Other value - Max Meter ID - * Note: - * - */ -rtk_uint32 rtk_switch_maxMeterId_get(void) -{ - if(init_state != INIT_COMPLETED) - return 0x00; - - return (halCtrl->max_meter_id); -} - -/* Function Name: - * rtk_switch_maxLutAddrNumber_get - * Description: - * Get Max LUT Address number - * Input: - * None - * Output: - * None - * Return: - * 0x00 - Not Initialize - * Other value - Max LUT Address number - * Note: - * - */ -rtk_uint32 rtk_switch_maxLutAddrNumber_get(void) -{ - if(init_state != INIT_COMPLETED) - return 0x00; - - return (halCtrl->max_lut_addr_num); -} - -/* Function Name: - * rtk_switch_isValidTrunkGrpId - * Description: - * Check if trunk group is valid or not - * Input: - * grpId - Group ID - * Output: - * None - * Return: - * RT_ERR_OK - Trunk Group ID is valid - * RT_ERR_LA_TRUNK_ID - Trunk Group ID is not valid - * Note: - * - */ -rtk_uint32 rtk_switch_isValidTrunkGrpId(rtk_uint32 grpId) -{ - if(init_state != INIT_COMPLETED) - return 0x00; - - if( (halCtrl->trunk_group_mask & (0x01 << grpId) ) != 0) - return RT_ERR_OK; - else - return RT_ERR_LA_TRUNK_ID; - -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv.c deleted file mode 100644 index 7858edcf53..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv.c +++ /dev/null @@ -1,639 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : - * - */ - -#include - -#if defined(RTK_X86_ASICDRV) -#include -#else -#include -#endif - -/*for driver verify testing only*/ -#ifdef CONFIG_RTL8367C_ASICDRV_TEST -#define CLE_VIRTUAL_REG_SIZE 0x10000 -rtk_uint16 CleVirtualReg[CLE_VIRTUAL_REG_SIZE]; -#endif - -#if defined(CONFIG_RTL865X_CLE) || defined (RTK_X86_CLE) -rtk_uint32 cleDebuggingDisplay; -#endif - -#ifdef EMBEDDED_SUPPORT -extern void setReg(rtk_uint16, rtk_uint16); -extern rtk_uint16 getReg(rtk_uint16); -#endif - -/* Function Name: - * rtl8367c_setAsicRegBit - * Description: - * Set a bit value of a specified register - * Input: - * reg - register's address - * bit - bit location - * value - value to set. It can be value 0 or 1. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * Note: - * Set a bit of a specified register to 1 or 0. - */ -ret_t rtl8367c_setAsicRegBit(rtk_uint32 reg, rtk_uint32 bit, rtk_uint32 value) -{ - -#if defined(RTK_X86_ASICDRV) - rtk_uint32 regData; - ret_t retVal; - - if(bit >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - - retVal = Access_Read(reg, 2, ®Data); - if(TRUE != retVal) - return RT_ERR_SMI; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - - if(value) - regData = regData | (1 << bit); - else - regData = regData & (~(1 << bit)); - - retVal = Access_Write(reg,2, regData); - if(TRUE != retVal) - return RT_ERR_SMI; - - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n", reg, regData); - - -#elif defined(CONFIG_RTL8367C_ASICDRV_TEST) - - if(bit >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - - else if(reg >= CLE_VIRTUAL_REG_SIZE) - return RT_ERR_OUT_OF_RANGE; - - if(value) - { - CleVirtualReg[reg] = CleVirtualReg[reg] | (1 << bit); - } - else - { - CleVirtualReg[reg] = CleVirtualReg[reg] & (~(1 << bit)); - } - - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n", reg, CleVirtualReg[reg]); - -#elif defined(EMBEDDED_SUPPORT) - rtk_uint16 tmp; - - if(reg > RTL8367C_REGDATAMAX || value > 1) - return RT_ERR_INPUT; - - tmp = getReg(reg); - tmp &= (1 << bitIdx); - tmp |= (value << bitIdx); - setReg(reg, tmp); - -#else - rtk_uint32 regData; - ret_t retVal; - - if(bit >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - - retVal = smi_read(reg, ®Data); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - #endif - if(value) - regData = regData | (1 << bit); - else - regData = regData & (~(1 << bit)); - - retVal = smi_write(reg, regData); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n", reg, regData); - #endif - -#endif - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicRegBit - * Description: - * Get a bit value of a specified register - * Input: - * reg - register's address - * bit - bit location - * value - value to get. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * Note: - * None - */ -ret_t rtl8367c_getAsicRegBit(rtk_uint32 reg, rtk_uint32 bit, rtk_uint32 *pValue) -{ - -#if defined(RTK_X86_ASICDRV) - - rtk_uint32 regData; - ret_t retVal; - - if(bit >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - - retVal = Access_Read(reg, 2, ®Data); - if(TRUE != retVal) - return RT_ERR_SMI; - - *pValue = (regData & (0x1 << bit)) >> bit; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - -#elif defined(CONFIG_RTL8367C_ASICDRV_TEST) - - if(bit >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - - if(reg >= CLE_VIRTUAL_REG_SIZE) - return RT_ERR_OUT_OF_RANGE; - - *pValue = (CleVirtualReg[reg] & (0x1 << bit)) >> bit; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, CleVirtualReg[reg]); - -#elif defined(EMBEDDED_SUPPORT) - rtk_uint16 tmp; - - if(reg > RTL8367C_REGDATAMAX ) - return RT_ERR_INPUT; - - tmp = getReg(reg); - tmp = tmp >> bitIdx; - tmp &= 1; - *value = tmp; -#else - rtk_uint32 regData; - ret_t retVal; - - retVal = smi_read(reg, ®Data); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - #endif - - *pValue = (regData & (0x1 << bit)) >> bit; - -#endif - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicRegBits - * Description: - * Set bits value of a specified register - * Input: - * reg - register's address - * bits - bits mask for setting - * value - bits value for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * Note: - * Set bits of a specified register to value. Both bits and value are be treated as bit-mask - */ -ret_t rtl8367c_setAsicRegBits(rtk_uint32 reg, rtk_uint32 bits, rtk_uint32 value) -{ - -#if defined(RTK_X86_ASICDRV) - - rtk_uint32 regData; - ret_t retVal; - rtk_uint32 bitsShift; - rtk_uint32 valueShifted; - - if(bits >= (1 << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1 << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - - valueShifted = value << bitsShift; - if(valueShifted > RTL8367C_REGDATAMAX) - return RT_ERR_INPUT; - - retVal = Access_Read(reg, 2, ®Data); - if(TRUE != retVal) - return RT_ERR_SMI; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - - regData = regData & (~bits); - regData = regData | (valueShifted & bits); - - retVal = Access_Write(reg,2, regData); - if(TRUE != retVal) - return RT_ERR_SMI; - - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n", reg, regData); - -#elif defined(CONFIG_RTL8367C_ASICDRV_TEST) - rtk_uint32 regData; - rtk_uint32 bitsShift; - rtk_uint32 valueShifted; - - if(bits >= (1 << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1 << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - valueShifted = value << bitsShift; - - if(valueShifted > RTL8367C_REGDATAMAX) - return RT_ERR_INPUT; - - if(reg >= CLE_VIRTUAL_REG_SIZE) - return RT_ERR_OUT_OF_RANGE; - - regData = CleVirtualReg[reg] & (~bits); - regData = regData | (valueShifted & bits); - - CleVirtualReg[reg] = regData; - - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n", reg, regData); - -#elif defined(EMBEDDED_SUPPORT) - rtk_uint32 regData; - rtk_uint32 bitsShift; - rtk_uint32 valueShifted; - - if(reg > RTL8367C_REGDATAMAX ) - return RT_ERR_INPUT; - - if(bits >= (1 << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1 << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - - valueShifted = value << bitsShift; - if(valueShifted > RTL8367C_REGDATAMAX) - return RT_ERR_INPUT; - - regData = getReg(reg); - regData = regData & (~bits); - regData = regData | (valueShifted & bits); - - setReg(reg, regData); - -#else - rtk_uint32 regData; - ret_t retVal; - rtk_uint32 bitsShift; - rtk_uint32 valueShifted; - - if(bits >= (1 << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1 << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - valueShifted = value << bitsShift; - - if(valueShifted > RTL8367C_REGDATAMAX) - return RT_ERR_INPUT; - - retVal = smi_read(reg, ®Data); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - #endif - - regData = regData & (~bits); - regData = regData | (valueShifted & bits); - - retVal = smi_write(reg, regData); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n", reg, regData); - #endif -#endif - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicRegBits - * Description: - * Get bits value of a specified register - * Input: - * reg - register's address - * bits - bits mask for setting - * value - bits value for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * Note: - * None - */ -ret_t rtl8367c_getAsicRegBits(rtk_uint32 reg, rtk_uint32 bits, rtk_uint32 *pValue) -{ - -#if defined(RTK_X86_ASICDRV) - - rtk_uint32 regData; - ret_t retVal; - rtk_uint32 bitsShift; - - if(bits >= (1 << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1 << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - - retVal = Access_Read(reg, 2, ®Data); - if(TRUE != retVal) - return RT_ERR_SMI; - - *pValue = (regData & bits) >> bitsShift; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - -#elif defined(CONFIG_RTL8367C_ASICDRV_TEST) - rtk_uint32 bitsShift; - - if(bits >= (1 << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1 << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - - if(reg >= CLE_VIRTUAL_REG_SIZE) - return RT_ERR_OUT_OF_RANGE; - - *pValue = (CleVirtualReg[reg] & bits) >> bitsShift; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, CleVirtualReg[reg]); - -#elif defined(EMBEDDED_SUPPORT) - rtk_uint32 regData; - rtk_uint32 bitsShift; - - if(reg > RTL8367C_REGDATAMAX ) - return RT_ERR_INPUT; - - if(bits >= (1UL << RTL8367C_REGBITLENGTH) ) - return RT_ERR_INPUT; - - bitsShift = 0; - while(!(bits & (1UL << bitsShift))) - { - bitsShift++; - if(bitsShift >= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - - regData = getReg(reg); - *value = (regData & bits) >> bitsShift; - -#else - rtk_uint32 regData; - ret_t retVal; - rtk_uint32 bitsShift; - - if(bits>= (1<= RTL8367C_REGBITLENGTH) - return RT_ERR_INPUT; - } - - retVal = smi_read(reg, ®Data); - if(retVal != RT_ERR_OK) return RT_ERR_SMI; - - *pValue = (regData & bits) >> bitsShift; - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n",reg, regData); - #endif - -#endif - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicReg - * Description: - * Set content of asic register - * Input: - * reg - register's address - * value - Value setting to register - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * The value will be set to ASIC mapping address only and it is always return RT_ERR_OK while setting un-mapping address registers - */ -ret_t rtl8367c_setAsicReg(rtk_uint32 reg, rtk_uint32 value) -{ -#if defined(RTK_X86_ASICDRV)/*RTK-CNSD2-NickWu-20061222: for x86 compile*/ - - ret_t retVal; - - retVal = Access_Write(reg,2,value); - if(TRUE != retVal) return RT_ERR_SMI; - - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n",reg,value); - -#elif defined(CONFIG_RTL8367C_ASICDRV_TEST) - - /*MIBs emulating*/ - if(reg == RTL8367C_REG_MIB_ADDRESS) - { - CleVirtualReg[RTL8367C_MIB_COUNTER_BASE_REG] = 0x1; - CleVirtualReg[RTL8367C_MIB_COUNTER_BASE_REG+1] = 0x2; - CleVirtualReg[RTL8367C_MIB_COUNTER_BASE_REG+2] = 0x3; - CleVirtualReg[RTL8367C_MIB_COUNTER_BASE_REG+3] = 0x4; - } - - if(reg >= CLE_VIRTUAL_REG_SIZE) - return RT_ERR_OUT_OF_RANGE; - - CleVirtualReg[reg] = value; - - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n",reg,CleVirtualReg[reg]); - -#elif defined(EMBEDDED_SUPPORT) - if(reg > RTL8367C_REGDATAMAX || value > RTL8367C_REGDATAMAX ) - return RT_ERR_INPUT; - - setReg(reg, value); - -#else - ret_t retVal; - - retVal = smi_write(reg, value); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("W[0x%4.4x]=0x%4.4x\n",reg,value); - #endif - -#endif - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicReg - * Description: - * Get content of asic register - * Input: - * reg - register's address - * value - Value setting to register - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * Value 0x0000 will be returned for ASIC un-mapping address - */ -ret_t rtl8367c_getAsicReg(rtk_uint32 reg, rtk_uint32 *pValue) -{ - -#if defined(RTK_X86_ASICDRV) - - rtk_uint32 regData; - ret_t retVal; - - retVal = Access_Read(reg, 2, ®Data); - if(TRUE != retVal) - return RT_ERR_SMI; - - *pValue = regData; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - -#elif defined(CONFIG_RTL8367C_ASICDRV_TEST) - if(reg >= CLE_VIRTUAL_REG_SIZE) - return RT_ERR_OUT_OF_RANGE; - - *pValue = CleVirtualReg[reg]; - - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, CleVirtualReg[reg]); - -#elif defined(EMBEDDED_SUPPORT) - if(reg > RTL8367C_REGDATAMAX ) - return RT_ERR_INPUT; - - *value = getReg(reg); - -#else - rtk_uint32 regData; - ret_t retVal; - - retVal = smi_read(reg, ®Data); - if(retVal != RT_ERR_OK) - return RT_ERR_SMI; - - *pValue = regData; - #ifdef CONFIG_RTL865X_CLE - if(0x8367B == cleDebuggingDisplay) - PRINT("R[0x%4.4x]=0x%4.4x\n", reg, regData); - #endif - -#endif - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_acl.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_acl.c deleted file mode 100644 index d9ccd97118..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_acl.c +++ /dev/null @@ -1,1173 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : ACL related function drivers - * - */ -#include - -#include - -#if defined(CONFIG_RTL8367C_ASICDRV_TEST) -rtl8367c_aclrulesmi Rtl8370sVirtualAclRuleTable[RTL8367C_ACLRULENO]; -rtk_uint16 Rtl8370sVirtualAclActTable[RTL8367C_ACLRULENO][RTL8367C_ACL_ACT_TABLE_LEN]; -#endif - -/* - Exchange structure type define with MMI and SMI -*/ -static void _rtl8367c_aclRuleStSmi2User( rtl8367c_aclrule *pAclUser, rtl8367c_aclrulesmi *pAclSmi) -{ - rtk_uint8 *care_ptr, *data_ptr; - rtk_uint8 care_tmp, data_tmp; - rtk_uint32 i; - - pAclUser->data_bits.active_portmsk = (((pAclSmi->data_bits_ext.rule_info >> 1) & 0x0007) << 8) | ((pAclSmi->data_bits.rule_info >> 8) & 0x00FF); - pAclUser->data_bits.type = (pAclSmi->data_bits.rule_info & 0x0007); - pAclUser->data_bits.tag_exist = (pAclSmi->data_bits.rule_info & 0x00F8) >> 3; - - care_ptr = (rtk_uint8*)&pAclSmi->care_bits; - data_ptr = (rtk_uint8*)&pAclSmi->data_bits; - - for ( i = 0; i < sizeof(struct acl_rule_smi_st); i++) - { - care_tmp = *(care_ptr + i) ^ (*(data_ptr + i)); - data_tmp = *(data_ptr + i); - - *(care_ptr + i) = care_tmp; - *(data_ptr + i) = data_tmp; - } - - care_ptr = (rtk_uint8*)&pAclSmi->care_bits_ext; - data_ptr = (rtk_uint8*)&pAclSmi->data_bits_ext; - care_tmp = (*care_ptr) ^ (*data_ptr); - data_tmp = (*data_ptr); - *care_ptr = care_tmp; - *data_ptr = data_tmp; - - for(i = 0; i < RTL8367C_ACLRULEFIELDNO; i++) - pAclUser->data_bits.field[i] = pAclSmi->data_bits.field[i]; - - pAclUser->valid = pAclSmi->valid; - - pAclUser->care_bits.active_portmsk = (((pAclSmi->care_bits_ext.rule_info >> 1) & 0x0007) << 8) | ((pAclSmi->care_bits.rule_info >> 8) & 0x00FF); - pAclUser->care_bits.type = (pAclSmi->care_bits.rule_info & 0x0007); - pAclUser->care_bits.tag_exist = (pAclSmi->care_bits.rule_info & 0x00F8) >> 3; - - for(i = 0; i < RTL8367C_ACLRULEFIELDNO; i++) - pAclUser->care_bits.field[i] = pAclSmi->care_bits.field[i]; -} - -/* - Exchange structure type define with MMI and SMI -*/ -static void _rtl8367c_aclRuleStUser2Smi(rtl8367c_aclrule *pAclUser, rtl8367c_aclrulesmi *pAclSmi) -{ - rtk_uint8 *care_ptr, *data_ptr; - rtk_uint8 care_tmp, data_tmp; - rtk_uint32 i; - - pAclSmi->data_bits_ext.rule_info = ((pAclUser->data_bits.active_portmsk >> 8) & 0x7) << 1; - pAclSmi->data_bits.rule_info = ((pAclUser->data_bits.active_portmsk & 0xff) << 8) | ((pAclUser->data_bits.tag_exist & 0x1F) << 3) | (pAclUser->data_bits.type & 0x07); - - for(i = 0;i < RTL8367C_ACLRULEFIELDNO; i++) - pAclSmi->data_bits.field[i] = pAclUser->data_bits.field[i]; - - pAclSmi->valid = pAclUser->valid; - - pAclSmi->care_bits_ext.rule_info = ((pAclUser->care_bits.active_portmsk >> 8) & 0x7) << 1; - pAclSmi->care_bits.rule_info = ((pAclUser->care_bits.active_portmsk & 0xff) << 8) | ((pAclUser->care_bits.tag_exist & 0x1F) << 3) | (pAclUser->care_bits.type & 0x07); - - for(i = 0; i < RTL8367C_ACLRULEFIELDNO; i++) - pAclSmi->care_bits.field[i] = pAclUser->care_bits.field[i]; - - care_ptr = (rtk_uint8*)&pAclSmi->care_bits; - data_ptr = (rtk_uint8*)&pAclSmi->data_bits; - - for ( i = 0; i < sizeof(struct acl_rule_smi_st); i++) - { - care_tmp = *(care_ptr + i) & ~(*(data_ptr + i)); - data_tmp = *(care_ptr + i) & *(data_ptr + i); - - *(care_ptr + i) = care_tmp; - *(data_ptr + i) = data_tmp; - } - - care_ptr = (rtk_uint8*)&pAclSmi->care_bits_ext; - data_ptr = (rtk_uint8*)&pAclSmi->data_bits_ext; - care_tmp = *care_ptr & ~(*data_ptr); - data_tmp = *care_ptr & *data_ptr; - - *care_ptr = care_tmp; - *data_ptr = data_tmp; -} - -/* - Exchange structure type define with MMI and SMI -*/ -static void _rtl8367c_aclActStSmi2User(rtl8367c_acl_act_t *pAclUser, rtk_uint16 *pAclSmi) -{ - pAclUser->cact = (pAclSmi[0] & 0x00C0) >> 6; - pAclUser->cvidx_cact = (pAclSmi[0] & 0x003F) | (((pAclSmi[3] & 0x0008) >> 3) << 6); - - pAclUser->sact = (pAclSmi[0] & 0xC000) >> 14; - pAclUser->svidx_sact = ((pAclSmi[0] & 0x3F00) >> 8) | (((pAclSmi[3] & 0x0010) >> 4) << 6); - - pAclUser->aclmeteridx = (pAclSmi[1] & 0x003F) | (((pAclSmi[3] & 0x0020) >> 5) << 6); - - pAclUser->fwdact = (pAclSmi[1] & 0xC000) >> 14; - pAclUser->fwdpmask = ((pAclSmi[1] & 0x3FC0) >> 6) | (((pAclSmi[3] & 0x01C0) >> 6) << 8); - - pAclUser->priact = (pAclSmi[2] & 0x00C0) >> 6; - pAclUser->pridx = (pAclSmi[2] & 0x003F) | (((pAclSmi[3] & 0x0200) >> 9) << 6); - - pAclUser->aclint = (pAclSmi[2] & 0x2000) >> 13; - pAclUser->gpio_en = (pAclSmi[2] & 0x1000) >> 12; - pAclUser->gpio_pin = (pAclSmi[2] & 0x0F00) >> 8; - - pAclUser->cact_ext = (pAclSmi[2] & 0xC000) >> 14; - pAclUser->tag_fmt = (pAclSmi[3] & 0x0003); - pAclUser->fwdact_ext = (pAclSmi[3] & 0x0004) >> 2; -} - -/* - Exchange structure type define with MMI and SMI -*/ -static void _rtl8367c_aclActStUser2Smi(rtl8367c_acl_act_t *pAclUser, rtk_uint16 *pAclSmi) -{ - pAclSmi[0] |= (pAclUser->cvidx_cact & 0x003F); - pAclSmi[0] |= (pAclUser->cact & 0x0003) << 6; - pAclSmi[0] |= (pAclUser->svidx_sact & 0x003F) << 8; - pAclSmi[0] |= (pAclUser->sact & 0x0003) << 14; - - pAclSmi[1] |= (pAclUser->aclmeteridx & 0x003F); - pAclSmi[1] |= (pAclUser->fwdpmask & 0x00FF) << 6; - pAclSmi[1] |= (pAclUser->fwdact & 0x0003) << 14; - - pAclSmi[2] |= (pAclUser->pridx & 0x003F); - pAclSmi[2] |= (pAclUser->priact & 0x0003) << 6; - pAclSmi[2] |= (pAclUser->gpio_pin & 0x000F) << 8; - pAclSmi[2] |= (pAclUser->gpio_en & 0x0001) << 12; - pAclSmi[2] |= (pAclUser->aclint & 0x0001) << 13; - pAclSmi[2] |= (pAclUser->cact_ext & 0x0003) << 14; - - pAclSmi[3] |= (pAclUser->tag_fmt & 0x0003); - pAclSmi[3] |= (pAclUser->fwdact_ext & 0x0001) << 2; - pAclSmi[3] |= ((pAclUser->cvidx_cact & 0x0040) >> 6) << 3; - pAclSmi[3] |= ((pAclUser->svidx_sact & 0x0040) >> 6) << 4; - pAclSmi[3] |= ((pAclUser->aclmeteridx & 0x0040) >> 6) << 5; - pAclSmi[3] |= ((pAclUser->fwdpmask & 0x0700) >> 8) << 6; - pAclSmi[3] |= ((pAclUser->pridx & 0x0040) >> 6) << 9; -} - -/* Function Name: - * rtl8367c_setAsicAcl - * Description: - * Set port acl function enable/disable - * Input: - * port - Physical port number (0~10) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicAcl(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_ACL_ENABLE_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicAcl - * Description: - * Get port acl function enable/disable - * Input: - * port - Physical port number (0~10) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicAcl(rtk_uint32 port, rtk_uint32* pEnabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_ACL_ENABLE_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicAclUnmatchedPermit - * Description: - * Set port acl function unmatched permit action - * Input: - * port - Physical port number (0~10) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicAclUnmatchedPermit(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_ACL_UNMATCH_PERMIT_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicAclUnmatchedPermit - * Description: - * Get port acl function unmatched permit action - * Input: - * port - Physical port number (0~10) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicAclUnmatchedPermit(rtk_uint32 port, rtk_uint32* pEnabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_ACL_UNMATCH_PERMIT_REG, port, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicAclRule - * Description: - * Set acl rule content - * Input: - * index - ACL rule index (0-95) of 96 ACL rules - * pAclRule - ACL rule stucture for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * System supported 95 shared 289-bit ACL ingress rule. Index was available at range 0-95 only. - * If software want to modify ACL rule, the ACL function should be disable at first or unspecify - * acl action will be executed. - * One ACL rule structure has three parts setting: - * Bit 0-147 Data Bits of this Rule - * Bit 148 Valid Bit - * Bit 149-296 Care Bits of this Rule - * There are four kinds of field in Data Bits and Care Bits: Active Portmask, Type, Tag Exist, and 8 fields - */ -ret_t rtl8367c_setAsicAclRule(rtk_uint32 index, rtl8367c_aclrule* pAclRule) -{ - rtl8367c_aclrulesmi aclRuleSmi; - rtk_uint16* tableAddr; - rtk_uint32 regAddr; - rtk_uint32 regData; - rtk_uint32 i; - ret_t retVal; - - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - memset(&aclRuleSmi, 0x00, sizeof(rtl8367c_aclrulesmi)); - - _rtl8367c_aclRuleStUser2Smi(pAclRule, &aclRuleSmi); - - /* Write valid bit = 0 */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - if(index >= 64) - regData = RTL8367C_ACLRULETBADDR2(DATABITS, index); - else - regData = RTL8367C_ACLRULETBADDR(DATABITS, index); - retVal = rtl8367c_setAsicReg(regAddr,regData); - if(retVal !=RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_TABLE_ACCESS_WRDATA_REG(RTL8367C_ACLRULETBLEN), 0x1, 0); - if(retVal !=RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_WRITE, TB_TARGET_ACLRULE); - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal !=RT_ERR_OK) - return retVal; - - - - /* Write ACS_ADR register */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - if(index >= 64) - regData = RTL8367C_ACLRULETBADDR2(CAREBITS, index); - else - regData = RTL8367C_ACLRULETBADDR(CAREBITS, index); - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write Care Bits to ACS_DATA registers */ - tableAddr = (rtk_uint16*)&aclRuleSmi.care_bits; - regAddr = RTL8367C_TABLE_ACCESS_WRDATA_BASE; - - for(i = 0; i < RTL8367C_ACLRULETBLEN; i++) - { - regData = *tableAddr; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr++; - tableAddr++; - } - retVal = rtl8367c_setAsicRegBits(RTL8367C_TABLE_ACCESS_WRDATA_REG(RTL8367C_ACLRULETBLEN), (0x0007 << 1), (aclRuleSmi.care_bits_ext.rule_info >> 1) & 0x0007); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write ACS_CMD register */ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_WRITE, TB_TARGET_ACLRULE); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK,regData); - if(retVal != RT_ERR_OK) - return retVal; - - - - /* Write ACS_ADR register for data bits */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - if(index >= 64) - regData = RTL8367C_ACLRULETBADDR2(DATABITS, index); - else - regData = RTL8367C_ACLRULETBADDR(DATABITS, index); - - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write Data Bits to ACS_DATA registers */ - tableAddr = (rtk_uint16*)&aclRuleSmi.data_bits; - regAddr = RTL8367C_TABLE_ACCESS_WRDATA_BASE; - - for(i = 0; i < RTL8367C_ACLRULETBLEN; i++) - { - regData = *tableAddr; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr++; - tableAddr++; - } - - retVal = rtl8367c_setAsicRegBit(RTL8367C_TABLE_ACCESS_WRDATA_REG(RTL8367C_ACLRULETBLEN), 0, aclRuleSmi.valid); - if(retVal != RT_ERR_OK) - return retVal; - retVal = rtl8367c_setAsicRegBits(RTL8367C_TABLE_ACCESS_WRDATA_REG(RTL8367C_ACLRULETBLEN), (0x0007 << 1), (aclRuleSmi.data_bits_ext.rule_info >> 1) & 0x0007); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write ACS_CMD register for care bits*/ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_WRITE, TB_TARGET_ACLRULE); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - -#ifdef CONFIG_RTL8367C_ASICDRV_TEST - memcpy(&Rtl8370sVirtualAclRuleTable[index], &aclRuleSmi, sizeof(rtl8367c_aclrulesmi)); -#endif - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicAclRule - * Description: - * Get acl rule content - * Input: - * index - ACL rule index (0-63) of 64 ACL rules - * pAclRule - ACL rule stucture for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-63) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclRule(rtk_uint32 index, rtl8367c_aclrule *pAclRule) -{ - rtl8367c_aclrulesmi aclRuleSmi; - rtk_uint32 regAddr, regData; - ret_t retVal; - rtk_uint16* tableAddr; - rtk_uint32 i; - - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - memset(&aclRuleSmi, 0x00, sizeof(rtl8367c_aclrulesmi)); - - /* Write ACS_ADR register for data bits */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - if(index >= 64) - regData = RTL8367C_ACLRULETBADDR2(DATABITS, index); - else - regData = RTL8367C_ACLRULETBADDR(DATABITS, index); - - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - - /* Write ACS_CMD register */ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_READ, TB_TARGET_ACLRULE); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Read Data Bits */ - regAddr = RTL8367C_TABLE_ACCESS_RDDATA_BASE; - tableAddr = (rtk_uint16*)&aclRuleSmi.data_bits; - for(i = 0; i < RTL8367C_ACLRULETBLEN; i++) - { - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *tableAddr = regData; - - regAddr ++; - tableAddr ++; - } - - /* Read Valid Bit */ - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_RDDATA_REG(RTL8367C_ACLRULETBLEN), 0, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - aclRuleSmi.valid = regData & 0x1; - /* Read active_portmsk_ext Bits */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_TABLE_ACCESS_RDDATA_REG(RTL8367C_ACLRULETBLEN), 0x7<<1, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - aclRuleSmi.data_bits_ext.rule_info = (regData % 0x0007) << 1; - - - /* Write ACS_ADR register for carebits*/ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - if(index >= 64) - regData = RTL8367C_ACLRULETBADDR2(CAREBITS, index); - else - regData = RTL8367C_ACLRULETBADDR(CAREBITS, index); - - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write ACS_CMD register */ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_READ, TB_TARGET_ACLRULE); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Read Care Bits */ - regAddr = RTL8367C_TABLE_ACCESS_RDDATA_BASE; - tableAddr = (rtk_uint16*)&aclRuleSmi.care_bits; - for(i = 0; i < RTL8367C_ACLRULETBLEN; i++) - { - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *tableAddr = regData; - - regAddr ++; - tableAddr ++; - } - /* Read active_portmsk_ext care Bits */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_TABLE_ACCESS_RDDATA_REG(RTL8367C_ACLRULETBLEN), 0x7<<1, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - aclRuleSmi.care_bits_ext.rule_info = (regData & 0x0007) << 1; - -#ifdef CONFIG_RTL8367C_ASICDRV_TEST - memcpy(&aclRuleSmi,&Rtl8370sVirtualAclRuleTable[index], sizeof(rtl8367c_aclrulesmi)); -#endif - - _rtl8367c_aclRuleStSmi2User(pAclRule, &aclRuleSmi); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicAclNot - * Description: - * Set rule comparison result inversion / no inversion - * Input: - * index - ACL rule index (0-95) of 96 ACL rules - * not - 1: inverse, 0: don't inverse - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * None - */ -ret_t rtl8367c_setAsicAclNot(rtk_uint32 index, rtk_uint32 not) -{ - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(index < 64) - return rtl8367c_setAsicRegBit(RTL8367C_ACL_ACTION_CTRL_REG(index), RTL8367C_ACL_OP_NOT_OFFSET(index), not); - else - return rtl8367c_setAsicRegBit(RTL8367C_ACL_ACTION_CTRL2_REG(index), RTL8367C_ACL_OP_NOT_OFFSET(index), not); - -} -/* Function Name: - * rtl8367c_getAsicAcl - * Description: - * Get rule comparison result inversion / no inversion - * Input: - * index - ACL rule index (0-95) of 95 ACL rules - * pNot - 1: inverse, 0: don't inverse - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclNot(rtk_uint32 index, rtk_uint32* pNot) -{ - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(index < 64) - return rtl8367c_getAsicRegBit(RTL8367C_ACL_ACTION_CTRL_REG(index), RTL8367C_ACL_OP_NOT_OFFSET(index), pNot); - else - return rtl8367c_getAsicRegBit(RTL8367C_ACL_ACTION_CTRL2_REG(index), RTL8367C_ACL_OP_NOT_OFFSET(index), pNot); - -} -/* Function Name: - * rtl8367c_setAsicAclTemplate - * Description: - * Set fields of a ACL Template - * Input: - * index - ACL template index(0~4) - * pAclType - ACL type stucture for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL template index(0~4) - * Note: - * The API can set type field of the 5 ACL rule templates. - * Each type has 8 fields. One field means what data in one field of a ACL rule means - * 8 fields of ACL rule 0~95 is descripted by one type in ACL group - */ -ret_t rtl8367c_setAsicAclTemplate(rtk_uint32 index, rtl8367c_acltemplate_t* pAclType) -{ - ret_t retVal; - rtk_uint32 i; - rtk_uint32 regAddr, regData; - - if(index >= RTL8367C_ACLTEMPLATENO) - return RT_ERR_OUT_OF_RANGE; - - regAddr = RTL8367C_ACL_RULE_TEMPLATE_CTRL_REG(index); - - for(i = 0; i < (RTL8367C_ACLRULEFIELDNO/2); i++) - { - regData = pAclType->field[i*2+1]; - regData = regData << 8 | pAclType->field[i*2]; - - retVal = rtl8367c_setAsicReg(regAddr + i, regData); - - if(retVal != RT_ERR_OK) - return retVal; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicAclTemplate - * Description: - * Get fields of a ACL Template - * Input: - * index - ACL template index(0~4) - * pAclType - ACL type stucture for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL template index(0~4) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclTemplate(rtk_uint32 index, rtl8367c_acltemplate_t *pAclType) -{ - ret_t retVal; - rtk_uint32 i; - rtk_uint32 regData, regAddr; - - if(index >= RTL8367C_ACLTEMPLATENO) - return RT_ERR_OUT_OF_RANGE; - - regAddr = RTL8367C_ACL_RULE_TEMPLATE_CTRL_REG(index); - - for(i = 0; i < (RTL8367C_ACLRULEFIELDNO/2); i++) - { - retVal = rtl8367c_getAsicReg(regAddr + i,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pAclType->field[i*2] = regData & 0xFF; - pAclType->field[i*2 + 1] = (regData >> 8) & 0xFF; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicAclAct - * Description: - * Set ACL rule matched Action - * Input: - * index - ACL rule index (0-95) of 96 ACL rules - * pAclAct - ACL action stucture for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * None - */ -ret_t rtl8367c_setAsicAclAct(rtk_uint32 index, rtl8367c_acl_act_t* pAclAct) -{ - rtk_uint16 aclActSmi[RTL8367C_ACL_ACT_TABLE_LEN]; - ret_t retVal; - rtk_uint32 regAddr, regData; - rtk_uint16* tableAddr; - rtk_uint32 i; - - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - memset(aclActSmi, 0x00, sizeof(rtk_uint16) * RTL8367C_ACL_ACT_TABLE_LEN); - _rtl8367c_aclActStUser2Smi(pAclAct, aclActSmi); - - /* Write ACS_ADR register for data bits */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - regData = index; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write Data Bits to ACS_DATA registers */ - tableAddr = aclActSmi; - regAddr = RTL8367C_TABLE_ACCESS_WRDATA_BASE; - - for(i = 0; i < RTL8367C_ACLACTTBLEN; i++) - { - regData = *tableAddr; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr++; - tableAddr++; - } - - /* Write ACS_CMD register for care bits*/ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_WRITE, TB_TARGET_ACLACT); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - -#ifdef CONFIG_RTL8367C_ASICDRV_TEST - memcpy(&Rtl8370sVirtualAclActTable[index][0], aclActSmi, sizeof(rtk_uint16) * RTL8367C_ACL_ACT_TABLE_LEN); -#endif - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicAclAct - * Description: - * Get ACL rule matched Action - * Input: - * index - ACL rule index (0-95) of 96 ACL rules - * pAclAct - ACL action stucture for setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclAct(rtk_uint32 index, rtl8367c_acl_act_t *pAclAct) -{ - rtk_uint16 aclActSmi[RTL8367C_ACL_ACT_TABLE_LEN]; - ret_t retVal; - rtk_uint32 regAddr, regData; - rtk_uint16 *tableAddr; - rtk_uint32 i; - - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - memset(aclActSmi, 0x00, sizeof(rtk_uint16) * RTL8367C_ACL_ACT_TABLE_LEN); - - /* Write ACS_ADR register for data bits */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - regData = index; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write ACS_CMD register */ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_READ, TB_TARGET_ACLACT); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Read Data Bits */ - regAddr = RTL8367C_TABLE_ACCESS_RDDATA_BASE; - tableAddr = aclActSmi; - for(i = 0; i < RTL8367C_ACLACTTBLEN; i++) - { - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *tableAddr = regData; - - regAddr ++; - tableAddr ++; - } - -#ifdef CONFIG_RTL8367C_ASICDRV_TEST - memcpy(aclActSmi, &Rtl8370sVirtualAclActTable[index][0], sizeof(rtk_uint16) * RTL8367C_ACL_ACT_TABLE_LEN); -#endif - - _rtl8367c_aclActStSmi2User(pAclAct, aclActSmi); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicAclActCtrl - * Description: - * Set ACL rule matched Action Control Bits - * Input: - * index - ACL rule index (0-95) of 96 ACL rules - * aclActCtrl - 6 ACL Control Bits - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * ACL Action Control Bits Indicate which actions will be take when a rule matches - */ -ret_t rtl8367c_setAsicAclActCtrl(rtk_uint32 index, rtk_uint32 aclActCtrl) -{ - ret_t retVal; - - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(index >= 64) - retVal = rtl8367c_setAsicRegBits(RTL8367C_ACL_ACTION_CTRL2_REG(index), RTL8367C_ACL_OP_ACTION_MASK(index), aclActCtrl); - else - retVal = rtl8367c_setAsicRegBits(RTL8367C_ACL_ACTION_CTRL_REG(index), RTL8367C_ACL_OP_ACTION_MASK(index), aclActCtrl); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicAclActCtrl - * Description: - * Get ACL rule matched Action Control Bits - * Input: - * index - ACL rule index (0-95) of 96 ACL rules - * pAclActCtrl - 6 ACL Control Bits - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL rule index (0-95) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclActCtrl(rtk_uint32 index, rtk_uint32 *pAclActCtrl) -{ - ret_t retVal; - rtk_uint32 regData; - - if(index > RTL8367C_ACLRULEMAX) - return RT_ERR_OUT_OF_RANGE; - - if(index >= 64) - retVal = rtl8367c_getAsicRegBits(RTL8367C_ACL_ACTION_CTRL2_REG(index), RTL8367C_ACL_OP_ACTION_MASK(index), ®Data); - else - retVal = rtl8367c_getAsicRegBits(RTL8367C_ACL_ACTION_CTRL_REG(index), RTL8367C_ACL_OP_ACTION_MASK(index), ®Data); - - if(retVal != RT_ERR_OK) - return retVal; - - *pAclActCtrl = regData; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicAclPortRange - * Description: - * Set ACL TCP/UDP range check - * Input: - * index - TCP/UDP port range check table index - * type - Range check type - * upperPort - TCP/UDP port range upper bound - * lowerPort - TCP/UDP port range lower bound - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid TCP/UDP port range check table index - * Note: - * None - */ -ret_t rtl8367c_setAsicAclPortRange(rtk_uint32 index, rtk_uint32 type, rtk_uint32 upperPort, rtk_uint32 lowerPort) -{ - ret_t retVal; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL2 + index*3, RTL8367C_ACL_SDPORT_RANGE_ENTRY0_CTRL2_MASK, type); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL1 + index*3, upperPort); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL0 + index*3, lowerPort); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicAclPortRange - * Description: - * Get ACL TCP/UDP range check - * Input: - * index - TCP/UDP port range check table index - * pType - Range check type - * pUpperPort - TCP/UDP port range upper bound - * pLowerPort - TCP/UDP port range lower bound - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid TCP/UDP port range check table index - * Note: - * None - */ -ret_t rtl8367c_getAsicAclPortRange(rtk_uint32 index, rtk_uint32* pType, rtk_uint32* pUpperPort, rtk_uint32* pLowerPort) -{ - ret_t retVal; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL2 + index*3, RTL8367C_ACL_SDPORT_RANGE_ENTRY0_CTRL2_MASK, pType); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL1 + index*3, pUpperPort); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_SDPORT_RANGE_ENTRY0_CTRL0 + index*3, pLowerPort); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicAclVidRange - * Description: - * Set ACL VID range check - * Input: - * index - ACL VID range check index(0~15) - * type - Range check type - * upperVid - VID range upper bound - * lowerVid - VID range lower bound - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL VID range check index(0~15) - * Note: - * None - */ -ret_t rtl8367c_setAsicAclVidRange(rtk_uint32 index, rtk_uint32 type, rtk_uint32 upperVid, rtk_uint32 lowerVid) -{ - ret_t retVal; - rtk_uint32 regData; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - regData = ((type << RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_TYPE_OFFSET) & RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_TYPE_MASK) | - (upperVid & RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_HIGH_MASK); - - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_VID_RANGE_ENTRY0_CTRL1 + index*2, regData); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_VID_RANGE_ENTRY0_CTRL0 + index*2, lowerVid); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicAclVidRange - * Description: - * Get ACL VID range check - * Input: - * index - ACL VID range check index(0~15) - * pType - Range check type - * pUpperVid - VID range upper bound - * pLowerVid - VID range lower bound - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL VID range check index(0~15) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclVidRange(rtk_uint32 index, rtk_uint32* pType, rtk_uint32* pUpperVid, rtk_uint32* pLowerVid) -{ - ret_t retVal; - rtk_uint32 regData; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_VID_RANGE_ENTRY0_CTRL1 + index*2, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pType = (regData & RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_TYPE_MASK) >> RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_TYPE_OFFSET; - *pUpperVid = regData & RTL8367C_ACL_VID_RANGE_ENTRY0_CTRL1_CHECK0_HIGH_MASK; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_VID_RANGE_ENTRY0_CTRL0 + index*2, pLowerVid); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicAclIpRange - * Description: - * Set ACL IP range check - * Input: - * index - ACL IP range check index(0~15) - * type - Range check type - * upperIp - IP range upper bound - * lowerIp - IP range lower bound - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL IP range check index(0~15) - * Note: - * None - */ -ret_t rtl8367c_setAsicAclIpRange(rtk_uint32 index, rtk_uint32 type, ipaddr_t upperIp, ipaddr_t lowerIp) -{ - ret_t retVal; - rtk_uint32 regData; - ipaddr_t ipData; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL4 + index*5, RTL8367C_ACL_IP_RANGE_ENTRY0_CTRL4_MASK, type); - if(retVal != RT_ERR_OK) - return retVal; - - ipData = upperIp; - - regData = ipData & 0xFFFF; - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL2 + index*5, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regData = (ipData>>16) & 0xFFFF; - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL3 + index*5, regData); - if(retVal != RT_ERR_OK) - return retVal; - - ipData = lowerIp; - - regData = ipData & 0xFFFF; - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL0 + index*5, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regData = (ipData>>16) & 0xFFFF; - retVal = rtl8367c_setAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL1 + index*5, regData); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicAclIpRange - * Description: - * Get ACL IP range check - * Input: - * index - ACL IP range check index(0~15) - * pType - Range check type - * pUpperIp - IP range upper bound - * pLowerIp - IP range lower bound - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid ACL IP range check index(0~15) - * Note: - * None - */ -ret_t rtl8367c_getAsicAclIpRange(rtk_uint32 index, rtk_uint32* pType, ipaddr_t* pUpperIp, ipaddr_t* pLowerIp) -{ - ret_t retVal; - rtk_uint32 regData; - ipaddr_t ipData; - - if(index > RTL8367C_ACLRANGEMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL4 + index*5, RTL8367C_ACL_IP_RANGE_ENTRY0_CTRL4_MASK, pType); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL2 + index*5, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - ipData = regData; - - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL3 + index*5, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - ipData = (regData <<16) | ipData; - *pUpperIp = ipData; - - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL0 + index*5, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - ipData = regData; - - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_ACL_IP_RANGE_ENTRY0_CTRL1 + index*5, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - ipData = (regData << 16) | ipData; - *pLowerIp = ipData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicAclGpioPolarity - * Description: - * Set ACL Goip control palarity - * Input: - * polarity - 1: High, 0: Low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * none - */ -ret_t rtl8367c_setAsicAclGpioPolarity(rtk_uint32 polarity) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_ACL_GPIO_POLARITY, RTL8367C_ACL_GPIO_POLARITY_OFFSET, polarity); -} -/* Function Name: - * rtl8367c_getAsicAclGpioPolarity - * Description: - * Get ACL Goip control palarity - * Input: - * pPolarity - 1: High, 0: Low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * none - */ -ret_t rtl8367c_getAsicAclGpioPolarity(rtk_uint32* pPolarity) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_ACL_GPIO_POLARITY, RTL8367C_ACL_GPIO_POLARITY_OFFSET, pPolarity); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_cputag.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_cputag.c deleted file mode 100644 index d22bf65eaa..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_cputag.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Proprietary CPU-tag related function drivers - * - */ -#include -/* Function Name: - * rtl8367c_setAsicCputagEnable - * Description: - * Set cpu tag function enable/disable - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable/disable input - * Note: - * If CPU tag function is disabled, CPU tag will not be added to frame - * forwarded to CPU port, and all ports cannot parse CPU tag. - */ -ret_t rtl8367c_setAsicCputagEnable(rtk_uint32 enabled) -{ - if(enabled > 1) - return RT_ERR_ENABLE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_EN_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicCputagEnable - * Description: - * Get cpu tag function enable/disable - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagEnable(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_EN_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicCputagTrapPort - * Description: - * Set cpu tag trap port - * Input: - * port - port number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * API can set destination port of trapping frame - */ -ret_t rtl8367c_setAsicCputagTrapPort(rtk_uint32 port) -{ - ret_t retVal; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TRAP_PORT_MASK, port & 7); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TRAP_PORT_EXT_MASK, (port>>3) & 1); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicCputagTrapPort - * Description: - * Get cpu tag trap port - * Input: - * pPort - port number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagTrapPort(rtk_uint32 *pPort) -{ - ret_t retVal; - rtk_uint32 tmpPort; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TRAP_PORT_MASK, &tmpPort); - if(retVal != RT_ERR_OK) - return retVal; - *pPort = tmpPort; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TRAP_PORT_EXT_MASK, &tmpPort); - if(retVal != RT_ERR_OK) - return retVal; - *pPort |= (tmpPort & 1) << 3; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicCputagPortmask - * Description: - * Set ports that can parse CPU tag - * Input: - * portmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicCputagPortmask(rtk_uint32 portmask) -{ - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicReg(RTL8367C_CPU_PORT_MASK_REG, portmask); -} -/* Function Name: - * rtl8367c_getAsicCputagPortmask - * Description: - * Get ports that can parse CPU tag - * Input: - * pPortmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_CPU_PORT_MASK_REG, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicCputagInsertMode - * Description: - * Set CPU-tag insert mode - * Input: - * mode - 0: insert to all packets; 1: insert to trapped packets; 2: don't insert - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Actions not allowed by the function - * Note: - * None - */ -ret_t rtl8367c_setAsicCputagInsertMode(rtk_uint32 mode) -{ - if(mode >= CPUTAG_INSERT_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_INSERTMODE_MASK, mode); -} -/* Function Name: - * rtl8367c_getAsicCputagInsertMode - * Description: - * Get CPU-tag insert mode - * Input: - * pMode - 0: insert to all packets; 1: insert to trapped packets; 2: don't insert - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagInsertMode(rtk_uint32 *pMode) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_INSERTMODE_MASK, pMode); -} -/* Function Name: - * rtl8367c_setAsicCputagPriorityRemapping - * Description: - * Set queue assignment of CPU port - * Input: - * srcPri - internal priority (0~7) - * newPri - internal priority after remapping (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicCputagPriorityRemapping(rtk_uint32 srcPri, rtk_uint32 newPri) -{ - if((srcPri > RTL8367C_PRIMAX) || (newPri > RTL8367C_PRIMAX)) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_REG(srcPri), RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_MASK(srcPri), newPri); -} -/* Function Name: - * rtl8367c_getAsicCputagPriorityRemapping - * Description: - * Get queue assignment of CPU port - * Input: - * srcPri - internal priority (0~7) - * pNewPri - internal priority after remapping (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagPriorityRemapping(rtk_uint32 srcPri, rtk_uint32 *pNewPri) -{ - if(srcPri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_REG(srcPri), RTL8367C_QOS_PRIPORITY_REMAPPING_IN_CPU_MASK(srcPri), pNewPri); -} -/* Function Name: - * rtl8367c_setAsicCputagPosition - * Description: - * Set cpu tag insert position - * Input: - * postion - 1: After entire packet(before CRC field), 0: After MAC_SA (Default) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicCputagPosition(rtk_uint32 postion) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TAG_POSITION_OFFSET, postion); -} -/* Function Name: - * rtl8367c_getAsicCputagPosition - * Description: - * Get cpu tag insert position - * Input: - * pPostion - 1: After entire packet(before CRC field), 0: After MAC_SA (Default) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagPosition(rtk_uint32* pPostion) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TAG_POSITION_OFFSET, pPostion); -} - -/* Function Name: - * rtl8367c_setAsicCputagMode - * Description: - * Set cpu tag mode - * Input: - * mode - 1: 4bytes mode, 0: 8bytes mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters - * Note: - * If CPU tag function is disabled, CPU tag will not be added to frame - * forwarded to CPU port, and all ports cannot parse CPU tag. - */ -ret_t rtl8367c_setAsicCputagMode(rtk_uint32 mode) -{ - if(mode > 1) - return RT_ERR_INPUT; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TAG_FORMAT_OFFSET, mode); -} -/* Function Name: - * rtl8367c_getAsicCputagMode - * Description: - * Get cpu tag mode - * Input: - * pMode - 1: 4bytes mode, 0: 8bytes mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagMode(rtk_uint32 *pMode) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TAG_FORMAT_OFFSET, pMode); -} -/* Function Name: - * rtl8367c_setAsicCputagRxMinLength - * Description: - * Set cpu tag mode - * Input: - * mode - 1: 64bytes, 0: 72bytes - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters - * Note: - * If CPU tag function is disabled, CPU tag will not be added to frame - * forwarded to CPU port, and all ports cannot parse CPU tag. - */ -ret_t rtl8367c_setAsicCputagRxMinLength(rtk_uint32 mode) -{ - if(mode > 1) - return RT_ERR_INPUT; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TAG_RXBYTECOUNT_OFFSET, mode); -} -/* Function Name: - * rtl8367c_getAsicCputagRxMinLength - * Description: - * Get cpu tag mode - * Input: - * pMode - 1: 64bytes, 0: 72bytes - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicCputagRxMinLength(rtk_uint32 *pMode) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_CPU_CTRL, RTL8367C_CPU_TAG_RXBYTECOUNT_OFFSET, pMode); -} - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_dot1x.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_dot1x.c deleted file mode 100644 index 73153e177e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_dot1x.c +++ /dev/null @@ -1,415 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : 802.1X related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsic1xPBEnConfig - * Description: - * Set 802.1x port-based port enable configuration - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsic1xPBEnConfig(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_DOT1X_PORT_ENABLE_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsic1xPBEnConfig - * Description: - * Get 802.1x port-based port enable configuration - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsic1xPBEnConfig(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_DOT1X_PORT_ENABLE_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsic1xPBAuthConfig - * Description: - * Set 802.1x port-based authorised port configuration - * Input: - * port - Physical port number (0~7) - * auth - 1: authorised, 0: non-authorised - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsic1xPBAuthConfig(rtk_uint32 port, rtk_uint32 auth) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_DOT1X_PORT_AUTH_REG, port, auth); -} -/* Function Name: - * rtl8367c_getAsic1xPBAuthConfig - * Description: - * Get 802.1x port-based authorised port configuration - * Input: - * port - Physical port number (0~7) - * pAuth - 1: authorised, 0: non-authorised - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsic1xPBAuthConfig(rtk_uint32 port, rtk_uint32 *pAuth) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_DOT1X_PORT_AUTH_REG, port, pAuth); -} -/* Function Name: - * rtl8367c_setAsic1xPBOpdirConfig - * Description: - * Set 802.1x port-based operational direction - * Input: - * port - Physical port number (0~7) - * opdir - Operation direction 1: IN, 0:BOTH - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsic1xPBOpdirConfig(rtk_uint32 port, rtk_uint32 opdir) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_DOT1X_PORT_OPDIR_REG, port, opdir); -} -/* Function Name: - * rtl8367c_getAsic1xPBOpdirConfig - * Description: - * Get 802.1x port-based operational direction - * Input: - * port - Physical port number (0~7) - * pOpdir - Operation direction 1: IN, 0:BOTH - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsic1xPBOpdirConfig(rtk_uint32 port, rtk_uint32* pOpdir) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_DOT1X_PORT_OPDIR_REG, port, pOpdir); -} -/* Function Name: - * rtl8367c_setAsic1xMBEnConfig - * Description: - * Set 802.1x mac-based port enable configuration - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsic1xMBEnConfig(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_DOT1X_MAC_ENABLE_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsic1xMBEnConfig - * Description: - * Get 802.1x mac-based port enable configuration - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsic1xMBEnConfig(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_DOT1X_MAC_ENABLE_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsic1xMBOpdirConfig - * Description: - * Set 802.1x mac-based operational direction - * Input: - * opdir - Operation direction 1: IN, 0:BOTH - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsic1xMBOpdirConfig(rtk_uint32 opdir) -{ - return rtl8367c_setAsicRegBit(RTL8367C_DOT1X_CFG_REG, RTL8367C_DOT1X_MAC_OPDIR_OFFSET, opdir); -} -/* Function Name: - * rtl8367c_getAsic1xMBOpdirConfig - * Description: - * Get 802.1x mac-based operational direction - * Input: - * pOpdir - Operation direction 1: IN, 0:BOTH - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsic1xMBOpdirConfig(rtk_uint32 *pOpdir) -{ - return rtl8367c_getAsicRegBit(RTL8367C_DOT1X_CFG_REG, RTL8367C_DOT1X_MAC_OPDIR_OFFSET, pOpdir); -} -/* Function Name: - * rtl8367c_setAsic1xProcConfig - * Description: - * Set 802.1x unauth. behavior configuration - * Input: - * port - Physical port number (0~7) - * proc - 802.1x unauth. behavior configuration 0:drop 1:trap to CPU 2:Guest VLAN - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_DOT1X_PROC - Unauthorized behavior error - * Note: - * None - */ -ret_t rtl8367c_setAsic1xProcConfig(rtk_uint32 port, rtk_uint32 proc) -{ - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(proc >= DOT1X_UNAUTH_END) - return RT_ERR_DOT1X_PROC; - - if(port < 8) - { - return rtl8367c_setAsicRegBits(RTL8367C_DOT1X_UNAUTH_ACT_BASE, RTL8367C_DOT1X_UNAUTH_ACT_MASK(port),proc); - } - else - { - return rtl8367c_setAsicRegBits(RTL8367C_REG_DOT1X_UNAUTH_ACT_W1, RTL8367C_DOT1X_UNAUTH_ACT_MASK(port),proc); - } -} -/* Function Name: - * rtl8367c_getAsic1xProcConfig - * Description: - * Get 802.1x unauth. behavior configuration - * Input: - * port - Physical port number (0~7) - * pProc - 802.1x unauth. behavior configuration 0:drop 1:trap to CPU 2:Guest VLAN - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsic1xProcConfig(rtk_uint32 port, rtk_uint32* pProc) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicRegBits(RTL8367C_DOT1X_UNAUTH_ACT_BASE, RTL8367C_DOT1X_UNAUTH_ACT_MASK(port),pProc); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_DOT1X_UNAUTH_ACT_W1, RTL8367C_DOT1X_UNAUTH_ACT_MASK(port),pProc); -} -/* Function Name: - * rtl8367c_setAsic1xGuestVidx - * Description: - * Set 802.1x guest vlan index - * Input: - * index - 802.1x guest vlan index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_DOT1X_GVLANIDX - Invalid cvid index - * Note: - * None - */ -ret_t rtl8367c_setAsic1xGuestVidx(rtk_uint32 index) -{ - if(index >= RTL8367C_CVIDXNO) - return RT_ERR_DOT1X_GVLANIDX; - - return rtl8367c_setAsicRegBits(RTL8367C_DOT1X_CFG_REG, RTL8367C_DOT1X_GVIDX_MASK, index); -} -/* Function Name: - * rtl8367c_getAsic1xGuestVidx - * Description: - * Get 802.1x guest vlan index - * Input: - * pIndex - 802.1x guest vlan index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsic1xGuestVidx(rtk_uint32 *pIndex) -{ - return rtl8367c_getAsicRegBits(RTL8367C_DOT1X_CFG_REG, RTL8367C_DOT1X_GVIDX_MASK, pIndex); -} -/* Function Name: - * rtl8367c_setAsic1xGVOpdir - * Description: - * Set 802.1x guest vlan talk to auth. DA - * Input: - * enabled - 0:disable 1:enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsic1xGVOpdir(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_DOT1X_CFG_REG, RTL8367C_DOT1X_GVOPDIR_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsic1xGVOpdir - * Description: - * Get 802.1x guest vlan talk to auth. DA - * Input: - * pEnabled - 0:disable 1:enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsic1xGVOpdir(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_DOT1X_CFG_REG, RTL8367C_DOT1X_GVOPDIR_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsic1xTrapPriority - * Description: - * Set 802.1x Trap priority - * Input: - * priority - priority (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsic1xTrapPriority(rtk_uint32 priority) -{ - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_QOS_TRAP_PRIORITY0, RTL8367C_DOT1X_PRIORTY_MASK,priority); -} -/* Function Name: - * rtl8367c_getAsic1xTrapPriority - * Description: - * Get 802.1x Trap priority - * Input: - * pPriority - priority (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsic1xTrapPriority(rtk_uint32 *pPriority) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_QOS_TRAP_PRIORITY0, RTL8367C_DOT1X_PRIORTY_MASK, pPriority); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_eav.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_eav.c deleted file mode 100644 index 370b7c6f3a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_eav.c +++ /dev/null @@ -1,877 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Ethernet AV related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicEavMacAddress - * Description: - * Set PTP MAC address - * Input: - * mac - PTP mac - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicEavMacAddress(ether_addr_t mac) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint8 *accessPtr; - rtk_uint32 i; - - accessPtr = (rtk_uint8*)&mac; - - regData = *accessPtr; - accessPtr ++; - regData = (regData << 8) | *accessPtr; - accessPtr ++; - for(i = 0; i <=2; i++) - { - retVal = rtl8367c_setAsicReg(RTL8367C_REG_MAC_ADDR_H - i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regData = *accessPtr; - accessPtr ++; - regData = (regData << 8) | *accessPtr; - accessPtr ++; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicEavMacAddress - * Description: - * Get PTP MAC address - * Input: - * None - * Output: - * pMac - PTP mac - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicEavMacAddress(ether_addr_t *pMac) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint8 *accessPtr; - rtk_uint32 i; - - accessPtr = (rtk_uint8*)pMac; - - for(i = 0; i <= 2; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_REG_MAC_ADDR_H - i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = (regData & 0xFF00) >> 8; - accessPtr ++; - *accessPtr = regData & 0xFF; - accessPtr ++; - } - - return retVal; -} - -/* Function Name: - * rtl8367c_setAsicEavTpid - * Description: - * Set PTP parser tag TPID. - * Input: - * outerTag - outter tag TPID - * innerTag - inner tag TPID - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicEavTpid(rtk_uint32 outerTag, rtk_uint32 innerTag) -{ - ret_t retVal; - - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_OTAG_TPID, outerTag)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_ITAG_TPID, innerTag)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicEavTpid - * Description: - * Get PTP parser tag TPID. - * Input: - * None - * Output: - * pOuterTag - outter tag TPID - * pInnerTag - inner tag TPID - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicEavTpid(rtk_uint32* pOuterTag, rtk_uint32* pInnerTag) -{ - ret_t retVal; - - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_OTAG_TPID, pOuterTag)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_ITAG_TPID, pInnerTag)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicEavSysTime - * Description: - * Set PTP system time - * Input: - * second - seconds - * nanoSecond - nano seconds - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * The time granuality is 8 nano seconds. - */ -ret_t rtl8367c_setAsicEavSysTime(rtk_uint32 second, rtk_uint32 nanoSecond) -{ - ret_t retVal; - rtk_uint32 sec_h, sec_l, nsec8_h, nsec8_l; - rtk_uint32 nano_second_8; - rtk_uint32 regData, busyFlag, count; - - if(nanoSecond > RTL8367C_EAV_NANOSECONDMAX) - return RT_ERR_INPUT; - - regData = 0; - sec_h = second >>16; - sec_l = second & 0xFFFF; - nano_second_8 = nanoSecond >> 3; - nsec8_h = (nano_second_8 >>16) & RTL8367C_PTP_TIME_NSEC_H_NSEC_MASK; - nsec8_l = nano_second_8 &0xFFFF; - - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_SEC_H_SEC, sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_SEC_L_SEC, sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_NSEC_L_NSEC, nsec8_l)) != RT_ERR_OK) - return retVal; - - regData = nsec8_h | (PTP_TIME_WRITE<= PTP_TIME_ADJ_END) - return RT_ERR_INPUT; - if(nanoSecond > RTL8367C_EAV_NANOSECONDMAX) - return RT_ERR_INPUT; - - regData = 0; - sec_h = second >>16; - sec_l = second & 0xFFFF; - nano_second_8 = nanoSecond >> 3; - nsec8_h = (nano_second_8 >>16) & RTL8367C_PTP_TIME_NSEC_H_NSEC_MASK; - nsec8_l = nano_second_8 &0xFFFF; - - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_SEC_H_SEC, sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_SEC_L_SEC, sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_NSEC_L_NSEC, nsec8_l)) != RT_ERR_OK) - return retVal; - - if (PTP_TIME_ADJ_INC == type) - regData = nsec8_h | (PTP_TIME_INC<=PTP_TIME_CTRL_END) - return RT_ERR_INPUT; - - regData = 0; - if (PTP_TIME_CTRL_START == control) - regData = RTL8367C_CFG_TIMER_EN_FRC_MASK | RTL8367C_CFG_TIMER_1588_EN_MASK; - else - regData = 0; - - if((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PTP_TIME_CFG, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicEavSysTimeCtrl - * Description: - * Get PTP system time control - * Input: - * None - * Output: - * pControl - start or stop - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicEavSysTimeCtrl(rtk_uint32* pControl) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 mask; - - mask = RTL8367C_CFG_TIMER_EN_FRC_MASK | RTL8367C_CFG_TIMER_1588_EN_MASK; - - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_PTP_TIME_CFG, ®Data)) != RT_ERR_OK) - return retVal; - - if( (regData & mask) == mask) - *pControl = PTP_TIME_CTRL_START; - else if( (regData & mask) == 0) - *pControl = PTP_TIME_CTRL_STOP; - else - return RT_ERR_NOT_ALLOWED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicEavInterruptMask - * Description: - * Set PTP interrupt enable mask - * Input: - * imr - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * [0]:TX_SYNC, - * [1]:TX_DELAY, - * [2]:TX_PDELAY_REQ, - * [3]:TX_PDELAY_RESP, - * [4]:RX_SYNC, - * [5]:RX_DELAY, - * [6]:RX_PDELAY_REQ, - * [7]:RX_PDELAY_RESP, - */ -ret_t rtl8367c_setAsicEavInterruptMask(rtk_uint32 imr) -{ - if ((imr&(RTL8367C_PTP_INTR_MASK<<8))>0) - return RT_ERR_INPUT; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_PTP_TIME_CFG2, RTL8367C_PTP_INTR_MASK, imr); -} -/* Function Name: - * rtl8367c_getAsicEavInterruptMask - * Description: - * Get PTP interrupt enable mask - * Input: - * pImr - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * [0]:TX_SYNC, - * [1]:TX_DELAY, - * [2]:TX_PDELAY_REQ, - * [3]:TX_PDELAY_RESP, - * [4]:RX_SYNC, - * [5]:RX_DELAY, - * [6]:RX_PDELAY_REQ, - * [7]:RX_PDELAY_RESP, - */ -ret_t rtl8367c_getAsicEavInterruptMask(rtk_uint32* pImr) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_PTP_TIME_CFG2, RTL8367C_PTP_INTR_MASK, pImr); -} - -/* Function Name: - * rtl8367c_getAsicEavInterruptStatus - * Description: - * Get PTP interrupt port status mask - * Input: - * pIms - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * [0]:p0 interrupt, - * [1]:p1 interrupt, - * [2]:p2 interrupt, - * [3]:p3 interrupt, - * [4]:p4 interrupt, - */ -ret_t rtl8367c_getAsicEavInterruptStatus(rtk_uint32* pIms) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_PTP_INTERRUPT_CFG, RTL8367C_PTP_PORT_MASK, pIms); -} - -/* Function Name: - * rtl8367c_setAsicInterruptMask - * Description: - * Clear interrupt enable mask - * Input: - * ims - Interrupt status mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * This API can be used to clear ASIC interrupt status and register will be cleared by writting 1. - * [0]:TX_SYNC, - * [1]:TX_DELAY, - * [2]:TX_PDELAY_REQ, - * [3]:TX_PDELAY_RESP, - * [4]:RX_SYNC, - * [5]:RX_DELAY, - * [6]:RX_PDELAY_REQ, - * [7]:RX_PDELAY_RESP, - */ -ret_t rtl8367c_setAsicEavPortInterruptStatus(rtk_uint32 port, rtk_uint32 ims) -{ - - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(port < 5) - return rtl8367c_setAsicRegBits(RTL8367C_EAV_PORT_CFG_REG(port), RTL8367C_PTP_INTR_MASK,ims); - else if(port == 5) - return rtl8367c_setAsicRegBits(RTL8367C_REG_P5_EAV_CFG, RTL8367C_PTP_INTR_MASK,ims); - else if(port == 6) - return rtl8367c_setAsicRegBits(RTL8367C_REG_P6_EAV_CFG, RTL8367C_PTP_INTR_MASK,ims); - else if(port == 7) - return rtl8367c_setAsicRegBits(RTL8367C_REG_P7_EAV_CFG, RTL8367C_PTP_INTR_MASK,ims); - else if(port == 8) - return rtl8367c_setAsicRegBits(RTL8367C_REG_P8_EAV_CFG, RTL8367C_PTP_INTR_MASK,ims); - else if(port == 9) - return rtl8367c_setAsicRegBits(RTL8367C_REG_P9_EAV_CFG, RTL8367C_PTP_INTR_MASK,ims); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicInterruptStatus - * Description: - * Get interrupt enable mask - * Input: - * pIms - Interrupt status mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * [0]:TX_SYNC, - * [1]:TX_DELAY, - * [2]:TX_PDELAY_REQ, - * [3]:TX_PDELAY_RESP, - * [4]:RX_SYNC, - * [5]:RX_DELAY, - * [6]:RX_PDELAY_REQ, - * [7]:RX_PDELAY_RESP, - */ -ret_t rtl8367c_getAsicEavPortInterruptStatus(rtk_uint32 port, rtk_uint32* pIms) -{ - - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - if(port < 5) - return rtl8367c_getAsicRegBits(RTL8367C_EAV_PORT_CFG_REG(port), RTL8367C_PTP_INTR_MASK, pIms); - else if(port == 5) - return rtl8367c_getAsicRegBits(RTL8367C_REG_P5_EAV_CFG, RTL8367C_PTP_INTR_MASK, pIms); - else if(port == 6) - return rtl8367c_getAsicRegBits(RTL8367C_REG_P6_EAV_CFG, RTL8367C_PTP_INTR_MASK,pIms); - else if(port == 7) - return rtl8367c_getAsicRegBits(RTL8367C_REG_P7_EAV_CFG, RTL8367C_PTP_INTR_MASK,pIms); - else if(port == 8) - return rtl8367c_getAsicRegBits(RTL8367C_REG_P8_EAV_CFG, RTL8367C_PTP_INTR_MASK,pIms); - else if(port == 9) - return rtl8367c_getAsicRegBits(RTL8367C_REG_P9_EAV_CFG, RTL8367C_PTP_INTR_MASK,pIms); - - return RT_ERR_OK; - -} - - -/* Function Name: - * rtl8367c_setAsicEavPortEnable - * Description: - * Set per-port EAV function enable/disable - * Input: - * port - Physical port number (0~9) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * If EAV function is enabled, PTP event messgae packet will be attached PTP timestamp for trapping - */ -ret_t rtl8367c_setAsicEavPortEnable(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(port < 5) - return rtl8367c_setAsicRegBit(RTL8367C_EAV_PORT_CFG_REG(port), RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, enabled); - else if(port == 5) - return rtl8367c_setAsicRegBit(RTL8367C_REG_P5_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, enabled); - else if(port == 6) - return rtl8367c_setAsicRegBit(RTL8367C_REG_P6_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, enabled); - else if(port == 7) - return rtl8367c_setAsicRegBit(RTL8367C_REG_P7_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, enabled); - else if(port == 8) - return rtl8367c_setAsicRegBit(RTL8367C_REG_P8_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, enabled); - else if(port == 9) - return rtl8367c_setAsicRegBit(RTL8367C_REG_P9_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, enabled); - - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicEavPortEnable - * Description: - * Get per-port EAV function enable/disable - * Input: - * port - Physical port number (0~9) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicEavPortEnable(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - - - if(port < 5) - return rtl8367c_getAsicRegBit(RTL8367C_EAV_PORT_CFG_REG(port), RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, pEnabled); - else if(port == 5) - return rtl8367c_getAsicRegBit(RTL8367C_REG_P5_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, pEnabled); - else if(port == 6) - return rtl8367c_getAsicRegBit(RTL8367C_REG_P6_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, pEnabled); - else if(port == 7) - return rtl8367c_getAsicRegBit(RTL8367C_REG_P7_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, pEnabled); - else if(port == 8) - return rtl8367c_getAsicRegBit(RTL8367C_REG_P8_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, pEnabled); - else if(port == 9) - return rtl8367c_getAsicRegBit(RTL8367C_REG_P9_EAV_CFG, RTL8367C_EAV_CFG_PTP_PHY_EN_EN_OFFSET, pEnabled); - - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicEavPortTimeStamp - * Description: - * Get PTP port time stamp - * Input: - * port - Physical port number (0~9) - * type - PTP packet type - * Output: - * timeStamp - seconds - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * The time granuality is 8 nano seconds. - */ -ret_t rtl8367c_getAsicEavPortTimeStamp(rtk_uint32 port, rtk_uint32 type, rtl8367c_ptp_time_stamp_t* timeStamp) -{ - ret_t retVal; - rtk_uint32 sec_h, sec_l, nsec8_h, nsec8_l; - rtk_uint32 nano_second_8; - - if(port > 9) - return RT_ERR_PORT_ID; - if(type >= PTP_PKT_TYPE_END) - return RT_ERR_INPUT; - - if(port < 5){ - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_SEQ_ID(port, type), &timeStamp->sequence_id))!= RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_PORT_SEC_H(port) , &sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_PORT_SEC_L(port), &sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_NSEC_H(port) , RTL8367C_PORT_NSEC_H_MASK,&nsec8_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_PORT_NSEC_L(port) , &nsec8_l)) != RT_ERR_OK) - return retVal; - }else if(port == 5){ - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P5_TX_SYNC_SEQ_ID+type, &timeStamp->sequence_id))!= RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P5_PORT_SEC_31_16, &sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P5_PORT_SEC_15_0, &sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_P5_PORT_NSEC_26_16 , RTL8367C_PORT_NSEC_H_MASK,&nsec8_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P5_PORT_NSEC_15_0, &nsec8_l)) != RT_ERR_OK) - return retVal; - }else if(port == 6){ - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P6_TX_SYNC_SEQ_ID+type, &timeStamp->sequence_id))!= RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P6_PORT_SEC_31_16, &sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P6_PORT_SEC_15_0, &sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_P6_PORT_NSEC_26_16 , RTL8367C_PORT_NSEC_H_MASK,&nsec8_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P6_PORT_NSEC_15_0, &nsec8_l)) != RT_ERR_OK) - return retVal; - }else if(port == 7){ - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P7_TX_SYNC_SEQ_ID+type, &timeStamp->sequence_id))!= RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P7_PORT_SEC_31_16, &sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P7_PORT_SEC_15_0, &sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_P7_PORT_NSEC_26_16 , RTL8367C_PORT_NSEC_H_MASK,&nsec8_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P7_PORT_NSEC_15_0, &nsec8_l)) != RT_ERR_OK) - return retVal; - }else if(port == 8){ - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P8_TX_SYNC_SEQ_ID+type, &timeStamp->sequence_id))!= RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P8_PORT_SEC_31_16, &sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P8_PORT_SEC_15_0, &sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_P8_PORT_NSEC_26_16 , RTL8367C_PORT_NSEC_H_MASK,&nsec8_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P8_PORT_NSEC_15_0, &nsec8_l)) != RT_ERR_OK) - return retVal; - }else if(port == 9){ - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P9_TX_SYNC_SEQ_ID+type, &timeStamp->sequence_id))!= RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P9_PORT_SEC_31_16, &sec_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P9_PORT_SEC_15_0, &sec_l)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_P9_PORT_NSEC_26_16 , RTL8367C_PORT_NSEC_H_MASK,&nsec8_h)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicReg(RTL8367C_REG_P9_PORT_NSEC_15_0, &nsec8_l)) != RT_ERR_OK) - return retVal; - } - - timeStamp->second = (sec_h<<16) | sec_l; - nano_second_8 = (nsec8_h<<16) | nsec8_l; - timeStamp->nano_second = nano_second_8<<3; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtl8367c_setAsicEavTrap - * Description: - * Set per-port PTP packet trap to CPU - * Input: - * port - Physical port number (0~5) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * If EAV trap enabled, switch will trap PTP packet to CPU - */ -ret_t rtl8367c_setAsicEavTrap(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_PTP_PORT0_CFG1 + (port * 0x20), RTL8367C_PTP_PORT0_CFG1_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicEavTimeSyncEn - * Description: - * Get per-port EPTP packet trap to CPU - * Input: - * port - Physical port number (0~5) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicEavTrap(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_PTP_PORT0_CFG1 + (port * 0x20), RTL8367C_PTP_PORT0_CFG1_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicEavEnable - * Description: - * Set per-port EAV function enable/disable - * Input: - * port - Physical port number (0~5) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * If EAV function is enabled, PTP event messgae packet will be attached PTP timestamp for trapping - */ -ret_t rtl8367c_setAsicEavEnable(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_EAV_CTRL0, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicEavEnable - * Description: - * Get per-port EAV function enable/disable - * Input: - * port - Physical port number (0~5) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicEavEnable(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port > RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_EAV_CTRL0, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicEavPriRemapping - * Description: - * Set non-EAV streaming priority remapping - * Input: - * srcpriority - Priority value - * priority - Absolute priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicEavPriRemapping(rtk_uint32 srcpriority, rtk_uint32 priority) -{ - if(srcpriority > RTL8367C_PRIMAX || priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_EAV_PRIORITY_REMAPPING_REG(srcpriority), RTL8367C_EAV_PRIORITY_REMAPPING_MASK(srcpriority),priority); -} -/* Function Name: - * rtl8367c_getAsicEavPriRemapping - * Description: - * Get non-EAV streaming priority remapping - * Input: - * srcpriority - Priority value - * pPriority - Absolute priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicEavPriRemapping(rtk_uint32 srcpriority, rtk_uint32 *pPriority) -{ - if(srcpriority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBits(RTL8367C_EAV_PRIORITY_REMAPPING_REG(srcpriority), RTL8367C_EAV_PRIORITY_REMAPPING_MASK(srcpriority),pPriority); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_eee.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_eee.c deleted file mode 100644 index f4dda6a6ae..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_eee.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 48989 $ - * $Date: 2014-07-01 15:45:24 +0800 (週二, 01 七月 2014) $ - * - * Purpose : RTL8370 switch high-level API for RTL8367C - * Feature : - * - */ - -#include -#include - -/* -@func ret_t | rtl8367c_setAsicEee100M | Set eee force mode function enable/disable. -@parm rtk_uint32 | port | The port number. -@parm rtk_uint32 | enabled | 1: enabled, 0: disabled. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input parameter. -@comm - This API set the 100M EEE enable function. - -*/ -ret_t rtl8367c_setAsicEee100M(rtk_uint32 port, rtk_uint32 enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if (enable > 1) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, EEE_OCP_PHY_ADDR, ®Data)) != RT_ERR_OK) - return retVal; - - if(enable) - regData |= (0x0001 << 1); - else - regData &= ~(0x0001 << 1); - - if((retVal = rtl8367c_setAsicPHYOCPReg(port, EEE_OCP_PHY_ADDR, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_getAsicEee100M | Get 100M eee enable/disable. -@parm rtk_uint32 | port | The port number. -@parm rtk_uint32* | enabled | 1: enabled, 0: disabled. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input parameter. -@comm - This API get the 100M EEE function. -*/ -ret_t rtl8367c_getAsicEee100M(rtk_uint32 port, rtk_uint32 *enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, EEE_OCP_PHY_ADDR, ®Data)) != RT_ERR_OK) - return retVal; - - *enable = (regData & (0x0001 << 1)) ? ENABLED : DISABLED; - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_setAsicEeeGiga | Set eee force mode function enable/disable. -@parm rtk_uint32 | port | The port number. -@parm rtk_uint32 | enabled | 1: enabled, 0: disabled. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input parameter. -@comm - This API set the 100M EEE enable function. - -*/ -ret_t rtl8367c_setAsicEeeGiga(rtk_uint32 port, rtk_uint32 enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if (enable > 1) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, EEE_OCP_PHY_ADDR, ®Data)) != RT_ERR_OK) - return retVal; - - if(enable) - regData |= (0x0001 << 2); - else - regData &= ~(0x0001 << 2); - - if((retVal = rtl8367c_setAsicPHYOCPReg(port, EEE_OCP_PHY_ADDR, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_getAsicEeeGiga | Get 100M eee enable/disable. -@parm rtk_uint32 | port | The port number. -@parm rtk_uint32* | enabled | 1: enabled, 0: disabled. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input parameter. -@comm - This API get the 100M EEE function. -*/ -ret_t rtl8367c_getAsicEeeGiga(rtk_uint32 port, rtk_uint32 *enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, EEE_OCP_PHY_ADDR, ®Data)) != RT_ERR_OK) - return retVal; - - *enable = (regData & (0x0001 << 2)) ? ENABLED : DISABLED; - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_fc.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_fc.c deleted file mode 100644 index 28f49b1ba7..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_fc.c +++ /dev/null @@ -1,1354 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Flow control related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicFlowControlSelect - * Description: - * Set system flow control type - * Input: - * select - System flow control type 1: Ingress flow control 0:Egress flow control - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSelect(rtk_uint32 select) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_FLOWCTRL_CTRL0, RTL8367C_FLOWCTRL_TYPE_OFFSET, select); -} -/* Function Name: - * rtl8367c_getAsicFlowControlSelect - * Description: - * Get system flow control type - * Input: - * pSelect - System flow control type 1: Ingress flow control 0:Egress flow control - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSelect(rtk_uint32 *pSelect) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_FLOWCTRL_CTRL0, RTL8367C_FLOWCTRL_TYPE_OFFSET, pSelect); -} -/* Function Name: - * rtl8367c_setAsicFlowControlJumboMode - * Description: - * Set Jumbo threhsold for flow control - * Input: - * enabled - Jumbo mode flow control 1: Enable 0:Disable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlJumboMode(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_FLOWCTRL_JUMBO_SIZE, RTL8367C_JUMBO_MODE_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicFlowControlJumboMode - * Description: - * Get Jumbo threhsold for flow control - * Input: - * pEnabled - Jumbo mode flow control 1: Enable 0:Disable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlJumboMode(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_FLOWCTRL_JUMBO_SIZE, RTL8367C_JUMBO_MODE_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicFlowControlJumboModeSize - * Description: - * Set Jumbo size for Jumbo mode flow control - * Input: - * size - Jumbo size 0:3Kbytes 1:4Kbytes 2:6Kbytes 3:9Kbytes - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlJumboModeSize(rtk_uint32 size) -{ - if(size >= FC_JUMBO_SIZE_END) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SIZE, RTL8367C_JUMBO_SIZE_MASK, size); -} -/* Function Name: - * rtl8367c_getAsicFlowControlJumboModeSize - * Description: - * Get Jumbo size for Jumbo mode flow control - * Input: - * pSize - Jumbo size 0:3Kbytes 1:4Kbytes 2:6Kbytes 3:9Kbytes - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlJumboModeSize(rtk_uint32* pSize) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SIZE, RTL8367C_JUMBO_SIZE_MASK, pSize); -} - -/* Function Name: - * rtl8367c_setAsicFlowControlQueueEgressEnable - * Description: - * Set flow control ability for each queue - * Input: - * port - Physical port number (0~7) - * qid - Queue id - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlQueueEgressEnable(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG(port), RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG_OFFSET(port)+ qid, enabled); -} -/* Function Name: - * rtl8367c_getAsicFlowControlQueueEgressEnable - * Description: - * Get flow control ability for each queue - * Input: - * port - Physical port number (0~7) - * qid - Queue id - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlQueueEgressEnable(rtk_uint32 port, rtk_uint32 qid, rtk_uint32* pEnabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG(port), RTL8367C_FLOWCRTL_EGRESS_QUEUE_ENABLE_REG_OFFSET(port)+ qid, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicFlowControlDropAll - * Description: - * Set system-based drop parameters - * Input: - * dropall - Whole system drop threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlDropAll(rtk_uint32 dropall) -{ - if(dropall >= RTL8367C_PAGE_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_CTRL0, RTL8367C_DROP_ALL_THRESHOLD_MASK, dropall); -} -/* Function Name: - * rtl8367c_getAsicFlowControlDropAll - * Description: - * Get system-based drop parameters - * Input: - * pDropall - Whole system drop threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlDropAll(rtk_uint32* pDropall) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_CTRL0, RTL8367C_DROP_ALL_THRESHOLD_MASK, pDropall); -} -/* Function Name: - * rtl8367c_setAsicFlowControlPauseAll - * Description: - * Set system-based all ports enable flow control parameters - * Input: - * threshold - Whole system pause all threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPauseAllThreshold(rtk_uint32 threshold) -{ - if(threshold >= RTL8367C_PAGE_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_ALL_ON, RTL8367C_FLOWCTRL_ALL_ON_THRESHOLD_MASK, threshold); -} -/* Function Name: - * rtl8367c_getAsicFlowControlPauseAllThreshold - * Description: - * Get system-based all ports enable flow control parameters - * Input: - * pThreshold - Whole system pause all threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPauseAllThreshold(rtk_uint32 *pThreshold) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_ALL_ON, RTL8367C_FLOWCTRL_ALL_ON_THRESHOLD_MASK, pThreshold); -} -/* Function Name: - * rtl8367c_setAsicFlowControlSystemThreshold - * Description: - * Set system-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSystemThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_SYS_OFF, RTL8367C_FLOWCTRL_SYS_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_SYS_ON, RTL8367C_FLOWCTRL_SYS_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlSystemThreshold - * Description: - * Get system-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSystemThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_SYS_OFF, RTL8367C_FLOWCTRL_SYS_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_SYS_ON, RTL8367C_FLOWCTRL_SYS_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlSharedThreshold - * Description: - * Set share-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSharedThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_SHARE_OFF, RTL8367C_FLOWCTRL_SHARE_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_SHARE_ON, RTL8367C_FLOWCTRL_SHARE_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlSharedThreshold - * Description: - * Get share-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSharedThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_SHARE_OFF, RTL8367C_FLOWCTRL_SHARE_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_SHARE_ON, RTL8367C_FLOWCTRL_SHARE_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlPortThreshold - * Description: - * Set Port-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPortThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_OFF, RTL8367C_FLOWCTRL_PORT_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_ON, RTL8367C_FLOWCTRL_PORT_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlPortThreshold - * Description: - * Get Port-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPortThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_OFF, RTL8367C_FLOWCTRL_PORT_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_ON, RTL8367C_FLOWCTRL_PORT_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlPortPrivateThreshold - * Description: - * Set Port-private-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPortPrivateThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_PRIVATE_OFF, RTL8367C_FLOWCTRL_PORT_PRIVATE_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_PRIVATE_ON, RTL8367C_FLOWCTRL_PORT_PRIVATE_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlPortPrivateThreshold - * Description: - * Get Port-private-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPortPrivateThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_PRIVATE_OFF, RTL8367C_FLOWCTRL_PORT_PRIVATE_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_PRIVATE_ON, RTL8367C_FLOWCTRL_PORT_PRIVATE_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlSystemDropThreshold - * Description: - * Set system-based drop parameters - * Input: - * onThreshold - Drop turn ON threshold - * offThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSystemDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SYS_OFF, RTL8367C_FLOWCTRL_FCOFF_SYS_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SYS_ON, RTL8367C_FLOWCTRL_FCOFF_SYS_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlSystemDropThreshold - * Description: - * Get system-based drop parameters - * Input: - * pOnThreshold - Drop turn ON threshold - * pOffThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSystemDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SYS_OFF, RTL8367C_FLOWCTRL_FCOFF_SYS_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SYS_ON, RTL8367C_FLOWCTRL_FCOFF_SYS_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlSharedDropThreshold - * Description: - * Set share-based fdrop parameters - * Input: - * onThreshold - Drop turn ON threshold - * offThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSharedDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SHARE_OFF, RTL8367C_FLOWCTRL_FCOFF_SHARE_OFF_MASK, offThreshold); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SHARE_ON, RTL8367C_FLOWCTRL_FCOFF_SHARE_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlSharedDropThreshold - * Description: - * Get share-based fdrop parameters - * Input: - * pOnThreshold - Drop turn ON threshold - * pOffThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSharedDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SHARE_OFF, RTL8367C_FLOWCTRL_FCOFF_SHARE_OFF_MASK, pOffThreshold); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_SHARE_ON, RTL8367C_FLOWCTRL_FCOFF_SHARE_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlPortDropThreshold - * Description: - * Set Port-based drop parameters - * Input: - * onThreshold - Drop turn ON threshold - * offThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPortDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_OFF, RTL8367C_FLOWCTRL_FCOFF_PORT_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_ON, RTL8367C_FLOWCTRL_FCOFF_PORT_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlPortDropThreshold - * Description: - * Get Port-based drop parameters - * Input: - * pOnThreshold - Drop turn ON threshold - * pOffThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPortDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_OFF, RTL8367C_FLOWCTRL_FCOFF_PORT_OFF_MASK, pOffThreshold); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_ON, RTL8367C_FLOWCTRL_FCOFF_PORT_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlPortPrivateDropThreshold - * Description: - * Set Port-private-based drop parameters - * Input: - * onThreshold - Drop turn ON threshold - * offThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPortPrivateDropThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF, RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_PRIVATE_ON, RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlPortPrivateDropThreshold - * Description: - * Get Port-private-based drop parameters - * Input: - * pOnThreshold - Drop turn ON threshold - * pOffThreshold - Drop turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPortPrivateDropThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF, RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_OFF_MASK, pOffThreshold); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_FCOFF_PORT_PRIVATE_ON, RTL8367C_FLOWCTRL_FCOFF_PORT_PRIVATE_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlSystemJumboThreshold - * Description: - * Set Jumbo system-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSystemJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SYS_OFF, RTL8367C_FLOWCTRL_JUMBO_SYS_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SYS_ON, RTL8367C_FLOWCTRL_JUMBO_SYS_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlSystemJumboThreshold - * Description: - * Get Jumbo system-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSystemJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SYS_OFF, RTL8367C_FLOWCTRL_JUMBO_SYS_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SYS_ON, RTL8367C_FLOWCTRL_JUMBO_SYS_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlSharedJumboThreshold - * Description: - * Set Jumbo share-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlSharedJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SHARE_OFF, RTL8367C_FLOWCTRL_JUMBO_SHARE_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SHARE_ON, RTL8367C_FLOWCTRL_JUMBO_SHARE_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlSharedJumboThreshold - * Description: - * Get Jumbo share-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlSharedJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SHARE_OFF, RTL8367C_FLOWCTRL_JUMBO_SHARE_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_SHARE_ON, RTL8367C_FLOWCTRL_JUMBO_SHARE_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlPortJumboThreshold - * Description: - * Set Jumbo Port-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPortJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_OFF, RTL8367C_FLOWCTRL_JUMBO_PORT_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_ON, RTL8367C_FLOWCTRL_JUMBO_PORT_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlPortJumboThreshold - * Description: - * Get Jumbo Port-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPortJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_OFF, RTL8367C_FLOWCTRL_JUMBO_PORT_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_ON, RTL8367C_FLOWCTRL_JUMBO_PORT_ON_MASK, pOnThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicFlowControlPortPrivateJumboThreshold - * Description: - * Set Jumbo Port-private-based flow control parameters - * Input: - * onThreshold - Flow control turn ON threshold - * offThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlPortPrivateJumboThreshold(rtk_uint32 onThreshold, rtk_uint32 offThreshold) -{ - ret_t retVal; - - if((onThreshold >= RTL8367C_PAGE_NUMBER) || (offThreshold >= RTL8367C_PAGE_NUMBER)) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF, RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF_MASK, offThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_PRIVATE_ON, RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_ON_MASK, onThreshold); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicFlowControlPortPrivateJumboThreshold - * Description: - * Get Jumbo Port-private-based flow control parameters - * Input: - * pOnThreshold - Flow control turn ON threshold - * pOffThreshold - Flow control turn OFF threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlPortPrivateJumboThreshold(rtk_uint32 *pOnThreshold, rtk_uint32 *pOffThreshold) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF, RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_OFF_MASK, pOffThreshold); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_JUMBO_PORT_PRIVATE_ON, RTL8367C_FLOWCTRL_JUMBO_PORT_PRIVATE_ON_MASK, pOnThreshold); - - return retVal; -} - - - -/* Function Name: - * rtl8367c_setAsicEgressFlowControlQueueDropThreshold - * Description: - * Set Queue-based egress flow control turn on or ingress flow control drop on threshold - * Input: - * qid - The queue id - * threshold - Queue-based flown control/drop turn ON threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_setAsicEgressFlowControlQueueDropThreshold(rtk_uint32 qid, rtk_uint32 threshold) -{ - if( threshold >= RTL8367C_PAGE_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_FLOWCTRL_QUEUE_DROP_ON_REG(qid), RTL8367C_FLOWCTRL_QUEUE_DROP_ON_MASK, threshold); -} -/* Function Name: - * rtl8367c_getAsicEgressFlowControlQueueDropThreshold - * Description: - * Get Queue-based egress flow control turn on or ingress flow control drop on threshold - * Input: - * qid - The queue id - * pThreshold - Queue-based flown control/drop turn ON threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_getAsicEgressFlowControlQueueDropThreshold(rtk_uint32 qid, rtk_uint32 *pThreshold) -{ - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_FLOWCTRL_QUEUE_DROP_ON_REG(qid), RTL8367C_FLOWCTRL_QUEUE_DROP_ON_MASK, pThreshold); -} -/* Function Name: - * rtl8367c_setAsicEgressFlowControlPortDropThreshold - * Description: - * Set port-based egress flow control turn on or ingress flow control drop on threshold - * Input: - * port - Physical port number (0~7) - * threshold - Queue-based flown control/drop turn ON threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicEgressFlowControlPortDropThreshold(rtk_uint32 port, rtk_uint32 threshold) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(threshold >= RTL8367C_PAGE_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_FLOWCTRL_PORT_DROP_ON_REG(port), RTL8367C_FLOWCTRL_PORT_DROP_ON_MASK, threshold); -} -/* Function Name: - * rtl8367c_setAsicEgressFlowControlPortDropThreshold - * Description: - * Set port-based egress flow control turn on or ingress flow control drop on threshold - * Input: - * port - Physical port number (0~7) - * pThreshold - Queue-based flown control/drop turn ON threshold - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicEgressFlowControlPortDropThreshold(rtk_uint32 port, rtk_uint32 *pThreshold) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_FLOWCTRL_PORT_DROP_ON_REG(port), RTL8367C_FLOWCTRL_PORT_DROP_ON_MASK, pThreshold); -} -/* Function Name: - * rtl8367c_setAsicEgressFlowControlPortDropGap - * Description: - * Set port-based egress flow control turn off or ingress flow control drop off gap - * Input: - * gap - Flow control/drop turn OFF threshold = turn ON threshold - gap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicEgressFlowControlPortDropGap(rtk_uint32 gap) -{ - if(gap >= RTL8367C_PAGE_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_GAP, RTL8367C_FLOWCTRL_PORT_GAP_MASK, gap); -} -/* Function Name: - * rtl8367c_getAsicEgressFlowControlPortDropGap - * Description: - * Get port-based egress flow control turn off or ingress flow control drop off gap - * Input: - * pGap - Flow control/drop turn OFF threshold = turn ON threshold - gap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicEgressFlowControlPortDropGap(rtk_uint32 *pGap) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT_GAP, RTL8367C_FLOWCTRL_PORT_GAP_MASK, pGap); -} -/* Function Name: - * rtl8367c_setAsicEgressFlowControlQueueDropGap - * Description: - * Set Queue-based egress flow control turn off or ingress flow control drop off gap - * Input: - * gap - Flow control/drop turn OFF threshold = turn ON threshold - gap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicEgressFlowControlQueueDropGap(rtk_uint32 gap) -{ - if(gap >= RTL8367C_PAGE_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_FLOWCTRL_QUEUE_GAP, RTL8367C_FLOWCTRL_QUEUE_GAP_MASK, gap); -} -/* Function Name: - * rtl8367c_getAsicEgressFlowControlQueueDropGap - * Description: - * Get Queue-based egress flow control turn off or ingress flow control drop off gap - * Input: - * pGap - Flow control/drop turn OFF threshold = turn ON threshold - gap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicEgressFlowControlQueueDropGap(rtk_uint32 *pGap) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_QUEUE_GAP, RTL8367C_FLOWCTRL_QUEUE_GAP_MASK, pGap); -} -/* Function Name: - * rtl8367c_getAsicEgressQueueEmptyPortMask - * Description: - * Get queue empty port mask - * Input: - * pPortmask - Queue empty port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicEgressQueueEmptyPortMask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_PORT_QEMPTY, pPortmask); -} -/* Function Name: - * rtl8367c_getAsicTotalPage - * Description: - * Get system total page usage number - * Input: - * pPageCount - page usage number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicTotalPage(rtk_uint32 *pPageCount) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_TOTAL_PAGE_COUNTER, RTL8367C_FLOWCTRL_TOTAL_PAGE_COUNTER_MASK, pPageCount); -} -/* Function Name: - * rtl8367c_getAsicPulbicPage - * Description: - * Get system public page usage number - * Input: - * pPageCount - page usage number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPulbicPage(rtk_uint32 *pPageCount) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PUBLIC_PAGE_COUNTER, RTL8367C_FLOWCTRL_PUBLIC_PAGE_COUNTER_MASK, pPageCount); -} -/* Function Name: - * rtl8367c_getAsicMaxTotalPage - * Description: - * Get system total page max usage number - * Input: - * pPageCount - page usage number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMaxTotalPage(rtk_uint32 *pPageCount) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_TOTAL_PAGE_MAX, RTL8367C_FLOWCTRL_TOTAL_PAGE_MAX_MASK, pPageCount); -} -/* Function Name: - * rtl8367c_getAsicPulbicPage - * Description: - * Get system public page max usage number - * Input: - * pPageCount - page usage number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMaxPulbicPage(rtk_uint32 *pPageCount) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PUBLIC_PAGE_MAX, RTL8367C_FLOWCTRL_PUBLIC_PAGE_MAX_MASK, pPageCount); -} -/* Function Name: - * rtl8367c_getAsicPortPage - * Description: - * Get per-port page usage number - * Input: - * port - Physical port number (0~7) - * pPageCount - page usage number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortPage(rtk_uint32 port, rtk_uint32 *pPageCount) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicRegBits(RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_REG(port), RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_MASK, pPageCount); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT8_PAGE_COUNTER+port - 8, RTL8367C_FLOWCTRL_PORT_PAGE_COUNTER_MASK, pPageCount); -} -/* Function Name: - * rtl8367c_getAsicPortPage - * Description: - * Get per-port page max usage number - * Input: - * port - Physical port number (0~7) - * pPageCount - page usage number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortPageMax(rtk_uint32 port, rtk_uint32 *pPageCount) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - if(port < 8) - return rtl8367c_getAsicRegBits(RTL8367C_FLOWCTRL_PORT_PAGE_MAX_REG(port), RTL8367C_FLOWCTRL_PORT_PAGE_MAX_MASK, pPageCount); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_FLOWCTRL_PORT0_PAGE_MAX+port-8, RTL8367C_FLOWCTRL_PORT_PAGE_MAX_MASK, pPageCount); - - -} - -/* Function Name: - * rtl8367c_setAsicFlowControlEgressPortIndep - * Description: - * Set per-port egress flow control independent - * Input: - * port - Physical port number (0~7) - * enabled - Egress port flow control usage 1:enable 0:disable. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicFlowControlEgressPortIndep(rtk_uint32 port, rtk_uint32 enable) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_PORT0_MISC_CFG + (port *0x20), RTL8367C_PORT0_MISC_CFG_FLOWCTRL_INDEP_OFFSET,enable); -} - -/* Function Name: - * rtl8367c_getAsicFlowControlEgressPortIndep - * Description: - * Get per-port egress flow control independent - * Input: - * port - Physical port number (0~7) - * enabled - Egress port flow control usage 1:enable 0:disable. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicFlowControlEgressPortIndep(rtk_uint32 port, rtk_uint32 *pEnable) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_PORT0_MISC_CFG + (port *0x20),RTL8367C_PORT0_MISC_CFG_FLOWCTRL_INDEP_OFFSET,pEnable); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_green.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_green.c deleted file mode 100644 index a38623850b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_green.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Green ethernet related functions - * - */ -#include - -/* Function Name: - * rtl8367c_getAsicGreenPortPage - * Description: - * Get per-Port ingress page usage per second - * Input: - * port - Physical port number (0~7) - * pPage - page number of ingress packet occuping per second - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * Ingress traffic occuping page number per second for high layer green feature usage - */ -ret_t rtl8367c_getAsicGreenPortPage(rtk_uint32 port, rtk_uint32* pPage) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 pageMeter; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_getAsicReg(RTL8367C_PAGEMETER_PORT_REG(port), ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pageMeter = regData; - - retVal = rtl8367c_getAsicReg(RTL8367C_PAGEMETER_PORT_REG(port) + 1, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pageMeter = pageMeter + (regData << 16); - - *pPage = pageMeter; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicGreenTrafficType - * Description: - * Set traffic type for each priority - * Input: - * priority - internal priority (0~7) - * traffictype - high/low traffic type, 1:high priority traffic type, 0:low priority traffic type - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicGreenTrafficType(rtk_uint32 priority, rtk_uint32 traffictype) -{ - - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_HIGHPRI_CFG, priority, (traffictype?1:0)); -} -/* Function Name: - * rtl8367c_getAsicGreenTrafficType - * Description: - * Get traffic type for each priority - * Input: - * priority - internal priority (0~7) - * pTraffictype - high/low traffic type, 1:high priority traffic type, 0:low priority traffic type - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicGreenTrafficType(rtk_uint32 priority, rtk_uint32* pTraffictype) -{ - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_HIGHPRI_CFG, priority, pTraffictype); -} - -/* Function Name: - * rtl8367c_setAsicGreenHighPriorityTraffic - * Description: - * Set indicator which ASIC had received high priority traffic - * Input: - * port - Physical port number (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicGreenHighPriorityTraffic(rtk_uint32 port) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_HIGHPRI_INDICATOR, port, 1); -} - - -/* Function Name: - * rtl8367c_getAsicGreenHighPriorityTraffic - * Description: - * Get indicator which ASIC had received high priority traffic or not - * Input: - * port - Physical port number (0~7) - * pIndicator - Have received high priority traffic indicator. If 1 means ASCI had received high priority in 1second checking priod - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicGreenHighPriorityTraffic(rtk_uint32 port, rtk_uint32* pIndicator) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_HIGHPRI_INDICATOR, port, pIndicator); -} - -/* -@func rtk_int32 | rtl8367c_setAsicGreenEthernet | Set green ethernet function. -@parm rtk_uint32 | green | Green feature function usage 1:enable 0:disable. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@comm - The API can set Green Ethernet function to reduce power consumption. While green feature is enabled, ASIC will automatic - detect the cable length and then select different power mode for best performance with minimums power consumption. Link down - ports will enter power savining mode in 10 seconds after the cable disconnected if power saving function is enabled. -*/ -ret_t rtl8367c_setAsicGreenEthernet(rtk_uint32 port, rtk_uint32 green) -{ - ret_t retVal; - rtk_uint32 checkCounter; - rtk_uint32 regData; - rtk_uint32 phy_status; - rtk_uint32 patchData[6][2] = { {0x809A, 0x8911}, {0x80A3, 0x9233}, {0x80AC, 0xA444}, {0x809F, 0x6B20}, {0x80A8, 0x6B22}, {0x80B1, 0x6B23} }; - rtk_uint32 idx; - rtk_uint32 data; - - if (green > 1) - return RT_ERR_INPUT; - - /* 0xa420[2:0] */ - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xA420, ®Data)) != RT_ERR_OK) - return retVal; - phy_status = (regData & 0x0007); - - if(phy_status == 3) - { - /* 0xb820[4] = 1 */ - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xB820, ®Data)) != RT_ERR_OK) - return retVal; - - regData |= (0x0001 << 4); - - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xB820, regData)) != RT_ERR_OK) - return retVal; - - /* wait 0xb800[6] = 1 */ - checkCounter = 100; - while(checkCounter) - { - retVal = rtl8367c_getAsicPHYOCPReg(port, 0xB800, ®Data); - if( (retVal != RT_ERR_OK) || ((regData & 0x0040) != 0x0040) ) - { - checkCounter --; - if(0 == checkCounter) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - else - checkCounter = 0; - } - } - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, &data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (data) - { - case 0x0276: - case 0x0597: - case 0x6367: - if(green) - { - for(idx = 0; idx < 6; idx++ ) - { - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA436, patchData[idx][0])) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA438, patchData[idx][1])) != RT_ERR_OK) - return retVal; - } - } - break; - default: - break;; - } - - - - /* 0xa436 = 0x8011 */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA436, 0x8011)) != RT_ERR_OK) - return retVal; - - /* wr 0xa438[15] = 0: disable, 1: enable */ - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xA438, ®Data)) != RT_ERR_OK) - return retVal; - - if(green) - regData |= 0x8000; - else - regData &= 0x7FFF; - - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA438, regData)) != RT_ERR_OK) - return retVal; - - if(phy_status == 3) - { - /* 0xb820[4] = 0 */ - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xB820, ®Data)) != RT_ERR_OK) - return retVal; - - regData &= ~(0x0001 << 4); - - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xB820, regData)) != RT_ERR_OK) - return retVal; - - /* wait 0xb800[6] = 0 */ - checkCounter = 100; - while(checkCounter) - { - retVal = rtl8367c_getAsicPHYOCPReg(port, 0xB800, ®Data); - if( (retVal != RT_ERR_OK) || ((regData & 0x0040) != 0x0000) ) - { - checkCounter --; - if(0 == checkCounter) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - else - checkCounter = 0; - } - } - - return RT_ERR_OK; -} - -/* -@func rtk_int32 | rtl8367c_getAsicGreenEthernet | Get green ethernet function. -@parm rtk_uint32 | *green | Green feature function usage 1:enable 0:disable. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@comm - The API can set Green Ethernet function to reduce power consumption. While green feature is enabled, ASIC will automatic - detect the cable length and then select different power mode for best performance with minimums power consumption. Link down - ports will enter power savining mode in 10 seconds after the cable disconnected if power saving function is enabled. -*/ -ret_t rtl8367c_getAsicGreenEthernet(rtk_uint32 port, rtk_uint32* green) -{ - ret_t retVal; - rtk_uint32 regData; - - /* 0xa436 = 0x8011 */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xA436, 0x8011)) != RT_ERR_OK) - return retVal; - - /* wr 0xa438[15] = 0: disable, 1: enable */ - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xA438, ®Data)) != RT_ERR_OK) - return retVal; - - if(regData & 0x8000) - *green = ENABLED; - else - *green = DISABLED; - - return RT_ERR_OK; -} - - -/* -@func ret_t | rtl8367c_setAsicPowerSaving | Set power saving mode -@parm rtk_uint32 | phy | phy number -@parm rtk_uint32 | enable | enable power saving mode. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_PORT_ID | Invalid port number. -@comm - The API can set power saving mode per phy. -*/ -ret_t rtl8367c_setAsicPowerSaving(rtk_uint32 phy, rtk_uint32 enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData; - rtk_uint32 regData; - rtk_uint32 phy_status; - rtk_uint32 checkCounter; - - if (enable > 1) - return RT_ERR_INPUT; - - /* 0xa420[2:0] */ - if((retVal = rtl8367c_getAsicPHYOCPReg(phy, 0xA420, ®Data)) != RT_ERR_OK) - return retVal; - - phy_status = (regData & 0x0007); - - if(phy_status == 3) - { - /* 0xb820[4] = 1 */ - if((retVal = rtl8367c_getAsicPHYOCPReg(phy, 0xB820, ®Data)) != RT_ERR_OK) - return retVal; - - regData |= (0x0001 << 4); - - if((retVal = rtl8367c_setAsicPHYOCPReg(phy, 0xB820, regData)) != RT_ERR_OK) - return retVal; - - /* wait 0xb800[6] = 1 */ - checkCounter = 100; - while(checkCounter) - { - retVal = rtl8367c_getAsicPHYOCPReg(phy, 0xB800, ®Data); - if( (retVal != RT_ERR_OK) || ((regData & 0x0040) != 0x0040) ) - { - checkCounter --; - if(0 == checkCounter) - { - return RT_ERR_BUSYWAIT_TIMEOUT; - } - } - else - checkCounter = 0; - } - } - - if ((retVal = rtl8367c_getAsicPHYReg(phy,PHY_POWERSAVING_REG,&phyData))!=RT_ERR_OK) - return retVal; - - phyData = phyData & ~(0x0001 << 2); - phyData = phyData | (enable << 2); - - if ((retVal = rtl8367c_setAsicPHYReg(phy,PHY_POWERSAVING_REG,phyData))!=RT_ERR_OK) - return retVal; - - if(phy_status == 3) - { - /* 0xb820[4] = 0 */ - if((retVal = rtl8367c_getAsicPHYOCPReg(phy, 0xB820, ®Data)) != RT_ERR_OK) - return retVal; - - regData &= ~(0x0001 << 4); - - if((retVal = rtl8367c_setAsicPHYOCPReg(phy, 0xB820, regData)) != RT_ERR_OK) - return retVal; - - /* wait 0xb800[6] = 0 */ - checkCounter = 100; - while(checkCounter) - { - retVal = rtl8367c_getAsicPHYOCPReg(phy, 0xB800, ®Data); - if( (retVal != RT_ERR_OK) || ((regData & 0x0040) != 0x0000) ) - { - checkCounter --; - if(0 == checkCounter) - { - return RT_ERR_BUSYWAIT_TIMEOUT; - } - } - else - checkCounter = 0; - } - } - - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_getAsicPowerSaving | Get power saving mode -@parm rtk_uint32 | port | The port number -@parm rtk_uint32* | enable | enable power saving mode. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_PORT_ID | Invalid port number. -@comm - The API can get power saving mode per phy. -*/ -ret_t rtl8367c_getAsicPowerSaving(rtk_uint32 phy, rtk_uint32* enable) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyData; - - if(NULL == enable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPHYReg(phy,PHY_POWERSAVING_REG,&phyData))!=RT_ERR_OK) - return retVal; - - if ((phyData & 0x0004) > 0) - *enable = 1; - else - *enable = 0; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_hsb.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_hsb.c deleted file mode 100644 index 435368d51b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_hsb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Field selector related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsicFieldSelector - * Description: - * Set user defined field selectors in HSB - * Input: - * index - index of field selector 0-15 - * format - Format of field selector - * offset - Retrieving data offset - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * System support 16 user defined field selctors. - * Each selector can be enabled or disable. User can defined retrieving 16-bits in many predefiend - * standard l2/l3/l4 payload. - */ -ret_t rtl8367c_setAsicFieldSelector(rtk_uint32 index, rtk_uint32 format, rtk_uint32 offset) -{ - rtk_uint32 regData; - - if(index > RTL8367C_FIELDSEL_FORMAT_NUMBER) - return RT_ERR_OUT_OF_RANGE; - - if(format >= FIELDSEL_FORMAT_END) - return RT_ERR_OUT_OF_RANGE; - - regData = (((format << RTL8367C_FIELD_SELECTOR_FORMAT_OFFSET) & RTL8367C_FIELD_SELECTOR_FORMAT_MASK ) | - ((offset << RTL8367C_FIELD_SELECTOR_OFFSET_OFFSET) & RTL8367C_FIELD_SELECTOR_OFFSET_MASK )); - - return rtl8367c_setAsicReg(RTL8367C_FIELD_SELECTOR_REG(index), regData); -} -/* Function Name: - * rtl8367c_getAsicFieldSelector - * Description: - * Get user defined field selectors in HSB - * Input: - * index - index of field selector 0-15 - * pFormat - Format of field selector - * pOffset - Retrieving data offset - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicFieldSelector(rtk_uint32 index, rtk_uint32* pFormat, rtk_uint32* pOffset) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicReg(RTL8367C_FIELD_SELECTOR_REG(index), ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pFormat = ((regData & RTL8367C_FIELD_SELECTOR_FORMAT_MASK) >> RTL8367C_FIELD_SELECTOR_FORMAT_OFFSET); - *pOffset = ((regData & RTL8367C_FIELD_SELECTOR_OFFSET_MASK) >> RTL8367C_FIELD_SELECTOR_OFFSET_OFFSET); - - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_i2c.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_i2c.c deleted file mode 100644 index 69f20a0188..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_i2c.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 38651 $ - * $Date: 2016-02-27 14:32:56 +0800 (周三, 17 四月 2016) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : I2C related functions - * - */ - - -#include -#include -#include - - - -/* Function Name: - * rtl8367c_setAsicI2C_checkBusIdle - * Description: - * Check i2c bus status idle or not - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_BUSYWAIT_TIMEOUT - i2c bus is busy - * Note: - * This API can check i2c bus status. - */ -ret_t rtl8367c_setAsicI2C_checkBusIdle(void) -{ - rtk_uint32 regData; - ret_t retVal; - - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_M_I2C_BUS_IDLE_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - - if(regData == 0x0001) - return RT_ERR_OK; /*i2c is idle*/ - else - return RT_ERR_BUSYWAIT_TIMEOUT; /*i2c is busy*/ -} - - -/* Function Name: - * rtl8367c_setAsicI2CStartCmd - * Description: - * Set I2C start command - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set i2c start command ,start a i2c traffic . - */ -ret_t rtl8367c_setAsicI2CStartCmd(void) -{ - rtk_uint32 regData; - ret_t retVal; - - /* Bits [4-1] = 0b0000, Start Command; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFE0; - regData |= 0x0001; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_I2C_CMD_EXEC_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( regData != 0x0); - - return RT_ERR_OK ; -} - -/* Function Name: - * rtl8367c_setAsicI2CStopCmd - * Description: - * Set I2C stop command - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set i2c stop command ,stop a i2c traffic. - */ -ret_t rtl8367c_setAsicI2CStopCmd(void) -{ - - rtk_uint32 regData; - ret_t retVal; - - /* Bits [4-1] = 0b0001, Stop Command; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFE0; - regData |= 0x0003; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_I2C_CMD_EXEC_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( regData != 0x0); - - return RT_ERR_OK ; -} - -/* Function Name: - * rtl8367c_setAsicI2CTxOneCharCmd - * Description: - * Set I2C Tx a char command, with a 8-bit data - * Input: - * oneChar - 8-bit data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set i2c Tx command and with a 8-bit data. - */ -ret_t rtl8367c_setAsicI2CTxOneCharCmd(rtk_uint8 oneChar) -{ - rtk_uint32 regData; - ret_t retVal; - - /* Bits [4-1] = 0b0010, tx one char; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - - regData &= 0xFFE0; - regData |= 0x0005; - regData &= 0x00FF; - regData |= (rtk_uint16) (oneChar << 8); - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_I2C_CMD_EXEC_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( regData != 0x0); - - return RT_ERR_OK ; -} - - -/* Function Name: - * rtl8367c_setAsicI2CcheckRxAck - * Description: - * Check if rx an Ack - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can check if rx an ack from i2c slave. - */ -ret_t rtl8367c_setAsicI2CcheckRxAck(void) -{ - rtk_uint32 regData; - ret_t retVal; - rtk_uint32 count = 0; - - do{ - count++; - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_SLV_ACK_FLAG_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( (regData != 0x1) && (count < TIMEROUT_FOR_MICROSEMI) ); - - if(regData != 0x1) - return RT_ERR_FAILED; - else - return RT_ERR_OK; -} - - -/* Function Name: - * rtl8367c_setAsicI2CRxOneCharCmd - * Description: - * Set I2C Rx command and get 8-bit data - * Input: - * None - * Output: - * pValue - 8bit-data - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set I2C Rx command and get 8-bit data. - */ -ret_t rtl8367c_setAsicI2CRxOneCharCmd(rtk_uint8 *pValue) -{ - rtk_uint32 regData; - ret_t retVal; - - /* Bits [4-1] = 0b0011, Rx one char; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFE0; - regData |= 0x0007; - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - }while( (regData & 0x1) != 0x0); - - *pValue = (rtk_uint8)(regData >> 8); - return RT_ERR_OK ; - -} - -/* Function Name: - * rtl8367c_setAsicI2CTxAckCmd - * Description: - * Set I2C Tx ACK command - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set I2C Tx ack command. - */ -ret_t rtl8367c_setAsicI2CTxAckCmd(void) -{ - rtk_uint32 regData; - ret_t retVal; - - /* Bits [4-1] = 0b0100, tx ACK Command; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFE0; - regData |= 0x0009; - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_I2C_CMD_EXEC_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( regData != 0x0); - - return RT_ERR_OK ; - -} - - -/* Function Name: - * rtl8367c_setAsicI2CTxNoAckCmd - * Description: - * Set I2C master Tx noACK command - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set I2C master Tx noACK command. - */ -ret_t rtl8367c_setAsicI2CTxNoAckCmd(void) -{ - rtk_uint32 regData; - ret_t retVal; - - /* Bits [4-1] = 0b0101, tx noACK Command; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFE0; - regData |= 0x000b; - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_I2C_CMD_EXEC_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( regData != 0x0); - - return RT_ERR_OK ; - -} - -/* Function Name: - * rtl8367c_setAsicI2CSoftRSTseqCmd - * Description: - * set I2C master tx soft reset command - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * Note: - * This API can set I2C master tx soft reset command. - */ -ret_t rtl8367c_setAsicI2CSoftRSTseqCmd(void) -{ - - rtk_uint32 regData; - ret_t retVal; - - /*Bits [4-1] = 0b0110, tx soft reset Command; Bit [0] = 1, Trigger the Command */ - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xFFE0; - regData |= 0x000d; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_CTL_STA_REG, regData)) != RT_ERR_OK) - return retVal; - - - /* wait for command finished */ - do{ - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_M_I2C_CTL_STA_REG, RTL8367C_I2C_CMD_EXEC_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - }while( regData != 0x0); - - return RT_ERR_OK ; -} - - -/* Function Name: - * rtl8367c_setAsicI2CGpioPinGroup - * Description: - * set I2C function used gpio pins - * Input: - * pinGroup_ID - gpio pins group - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_INPUT _ Invalid input parameter - * Note: - * This API can set I2C function used gpio pins. - * There are three group gpio pins - */ -ret_t rtl8367c_setAsicI2CGpioPinGroup(rtk_uint32 pinGroup_ID) -{ - rtk_uint32 regData; - ret_t retVal; - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_SYS_CTL, ®Data)) != RT_ERR_OK) - return retVal; - if( pinGroup_ID==0 ) - { - regData &= 0x0FFF; - regData |= 0x5000; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_SYS_CTL, regData)) != RT_ERR_OK) - return retVal; - } - - else if( pinGroup_ID==1 ) - { - regData &= 0x0FFF; - regData |= 0xA000; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_SYS_CTL, regData)) != RT_ERR_OK) - return retVal; - } - - else if( pinGroup_ID==2 ) - { - regData &= 0x0FFF; - regData |= 0xF000; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_M_I2C_SYS_CTL, regData)) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK ; - -} - -/* Function Name: - * rtl8367c_setAsicI2CGpioPinGroup - * Description: - * set I2C function used gpio pins - * Input: - * pinGroup_ID - gpio pins group - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_INPUT _ Invalid input parameter - * Note: - * This API can set I2C function used gpio pins. - * There are three group gpio pins - */ -ret_t rtl8367c_getAsicI2CGpioPinGroup(rtk_uint32 * pPinGroup_ID) -{ - - rtk_uint32 regData; - ret_t retVal; - if( (retVal = rtl8367c_getAsicReg(RTL8367C_REG_M_I2C_SYS_CTL, ®Data)) != RT_ERR_OK) - return retVal; - regData &= 0xF000 ; - regData = (regData >> 12); - - if( regData == 0x5 ) - *pPinGroup_ID = 0; - else if(regData == 0xA) - *pPinGroup_ID = 1; - else if(regData == 0xF) - *pPinGroup_ID = 2; - else - return RT_ERR_FAILED; - return RT_ERR_OK ; -} - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_igmp.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_igmp.c deleted file mode 100644 index e0e734d61e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_igmp.c +++ /dev/null @@ -1,2109 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : IGMP related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsicIgmp - * Description: - * Set IGMP/MLD state - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIgmp(rtk_uint32 enabled) -{ - ret_t retVal; - - /* Enable/Disable H/W IGMP/MLD */ - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_EN_OFFSET, enabled); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicIgmp - * Description: - * Get IGMP/MLD state - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIgmp(rtk_uint32 *ptr_enabled) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_EN_OFFSET, ptr_enabled); - return retVal; -} -/* Function Name: - * rtl8367c_setAsicIpMulticastVlanLeaky - * Description: - * Set IP multicast VLAN Leaky function - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * When enabling this function, - * if the lookup result(forwarding portmap) of IP Multicast packet is over VLAN boundary, - * the packet can be forwarded across VLAN - */ -ret_t rtl8367c_setAsicIpMulticastVlanLeaky(rtk_uint32 port, rtk_uint32 enabled) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IPMCAST_VLAN_LEAKY, port, enabled); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicIpMulticastVlanLeaky - * Description: - * Get IP multicast VLAN Leaky function - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicIpMulticastVlanLeaky(rtk_uint32 port, rtk_uint32 *ptr_enabled) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IPMCAST_VLAN_LEAKY, port, ptr_enabled); - - return retVal; -} - -/* Function Name: - * rtl8367c_setAsicIGMPTableFullOP - * Description: - * Set Table Full operation - * Input: - * operation - The operation should be taken when the IGMP table is full. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter is out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPTableFullOP(rtk_uint32 operation) -{ - ret_t retVal; - - if(operation >= TABLE_FULL_OP_END) - return RT_ERR_OUT_OF_RANGE; - - /* Table full Operation */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG1, RTL8367C_TABLE_FULL_OP_MASK, operation); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPTableFullOP - * Description: - * Get Table Full operation - * Input: - * None - * Output: - * poperation - The operation should be taken when the IGMP table is full. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPTableFullOP(rtk_uint32 *poperation) -{ - ret_t retVal; - rtk_uint32 value; - - /* Table full Operation */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG1, RTL8367C_TABLE_FULL_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - - *poperation = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPCRCErrOP - * Description: - * Set the operation when ASIC receive a Checksum error packet - * Input: - * operation -The operation when ASIC receive a Checksum error packet - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter is out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPCRCErrOP(rtk_uint32 operation) -{ - ret_t retVal; - - if(operation >= CRC_ERR_OP_END) - return RT_ERR_OUT_OF_RANGE; - - /* CRC Error Operation */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_CKS_ERR_OP_MASK, operation); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPCRCErrOP - * Description: - * Get the operation when ASIC receive a Checksum error packet - * Input: - * None - * Output: - * poperation - The operation of Checksum error packet - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPCRCErrOP(rtk_uint32 *poperation) -{ - ret_t retVal; - rtk_uint32 value; - - /* CRC Error Operation */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_CKS_ERR_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - - *poperation = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPFastLeaveEn - * Description: - * Enable/Disable Fast Leave - * Input: - * enabled - 1:enable Fast Leave; 0:disable Fast Leave - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPFastLeaveEn(rtk_uint32 enabled) -{ - ret_t retVal; - - /* Fast Leave */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_FAST_LEAVE_EN_MASK, (enabled >= 1) ? 1 : 0); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPFastLeaveEn - * Description: - * Get Fast Leave state - * Input: - * None - * Output: - * penabled - 1:enable Fast Leave; 0:disable Fast Leave - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPFastLeaveEn(rtk_uint32 *penabled) -{ - ret_t retVal; - rtk_uint32 value; - - /* Fast Leave */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_FAST_LEAVE_EN_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - - *penabled = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPLeaveTimer - * Description: - * Set the Leave timer of IGMP/MLD - * Input: - * leave_timer - Leave timer - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter is out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPLeaveTimer(rtk_uint32 leave_timer) -{ - ret_t retVal; - - if(leave_timer > RTL8367C_MAX_LEAVE_TIMER) - return RT_ERR_OUT_OF_RANGE; - - /* Leave timer */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_LEAVE_TIMER_MASK, leave_timer); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPLeaveTimer - * Description: - * Get the Leave timer of IGMP/MLD - * Input: - * None - * Output: - * pleave_timer - Leave timer - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPLeaveTimer(rtk_uint32 *pleave_timer) -{ - ret_t retVal; - rtk_uint32 value; - - /* Leave timer */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_LEAVE_TIMER_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - - *pleave_timer = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPQueryInterval - * Description: - * Set Query Interval of IGMP/MLD - * Input: - * interval - Query Interval - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter is out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPQueryInterval(rtk_uint32 interval) -{ - ret_t retVal; - - if(interval > RTL8367C_MAX_QUERY_INT) - return RT_ERR_OUT_OF_RANGE; - - /* Query Interval */ - retVal = rtl8367c_setAsicReg(RTL8367C_REG_IGMP_MLD_CFG2, interval); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPQueryInterval - * Description: - * Get Query Interval of IGMP/MLD - * Input: - * None - * Output: - * pinterval - Query Interval - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPQueryInterval(rtk_uint32 *pinterval) -{ - ret_t retVal; - rtk_uint32 value; - - /* Query Interval */ - retVal = rtl8367c_getAsicReg(RTL8367C_REG_IGMP_MLD_CFG2, &value); - if(retVal != RT_ERR_OK) - return retVal; - - *pinterval = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPRobVar - * Description: - * Set Robustness Variable of IGMP/MLD - * Input: - * rob_var - Robustness Variable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter is out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPRobVar(rtk_uint32 rob_var) -{ - ret_t retVal; - - if(rob_var > RTL8367C_MAX_ROB_VAR) - return RT_ERR_OUT_OF_RANGE; - - /* Bourstness variable */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_ROBURSTNESS_VAR_MASK, rob_var); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPRobVar - * Description: - * Get Robustness Variable of IGMP/MLD - * Input: - * none - * Output: - * prob_var - Robustness Variable - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPRobVar(rtk_uint32 *prob_var) -{ - ret_t retVal; - rtk_uint32 value; - - /* Bourstness variable */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_ROBURSTNESS_VAR_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - - *prob_var = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPStaticRouterPort - * Description: - * Set IGMP static router port mask - * Input: - * pmsk - Static portmask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPStaticRouterPort(rtk_uint32 pmsk) -{ - if(pmsk > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_STATIC_ROUTER_PORT, RTL8367C_IGMP_STATIC_ROUTER_PORT_MASK, pmsk); -} - -/* Function Name: - * rtl8367c_getAsicIGMPStaticRouterPort - * Description: - * Get IGMP static router port mask - * Input: - * pmsk - Static portmask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPStaticRouterPort(rtk_uint32 *pmsk) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_STATIC_ROUTER_PORT, RTL8367C_IGMP_STATIC_ROUTER_PORT_MASK, pmsk); -} - -/* Function Name: - * rtl8367c_setAsicIGMPAllowDynamicRouterPort - * Description: - * Set IGMP dynamic router port allow mask - * Input: - * pmsk - Allow dynamic router port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPAllowDynamicRouterPort(rtk_uint32 pmsk) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_IGMP_MLD_CFG4, pmsk); -} - -/* Function Name: - * rtl8367c_getAsicIGMPAllowDynamicRouterPort - * Description: - * Get IGMP dynamic router port allow mask - * Input: - * None. - * Output: - * pPmsk - Allow dynamic router port mask - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPAllowDynamicRouterPort(rtk_uint32 *pPmsk) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_IGMP_MLD_CFG4, pPmsk); -} - -/* Function Name: - * rtl8367c_getAsicIGMPdynamicRouterPort1 - * Description: - * Get 1st dynamic router port and timer - * Input: - * port - Physical port number (0~7) - * timer - router port timer - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPdynamicRouterPort1(rtk_uint32 *port, rtk_uint32 *timer) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_DYNAMIC_ROUTER_PORT, RTL8367C_D_ROUTER_PORT_1_MASK, port); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_DYNAMIC_ROUTER_PORT, RTL8367C_D_ROUTER_PORT_TMR_1_MASK, timer); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPdynamicRouterPort2 - * Description: - * Get 2nd dynamic router port and timer - * Input: - * port - Physical port number (0~7) - * timer - router port timer - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPdynamicRouterPort2(rtk_uint32 *port, rtk_uint32 *timer) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_DYNAMIC_ROUTER_PORT, RTL8367C_D_ROUTER_PORT_2_MASK, port); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_DYNAMIC_ROUTER_PORT, RTL8367C_D_ROUTER_PORT_TMR_2_MASK, timer); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPSuppression - * Description: - * Set the suppression function - * Input: - * report_supp_enabled - Report suppression, 1:Enable, 0:disable - * leave_supp_enabled - Leave suppression, 1:Enable, 0:disable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPSuppression(rtk_uint32 report_supp_enabled, rtk_uint32 leave_supp_enabled) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_REPORT_SUPPRESSION_MASK, report_supp_enabled); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_LEAVE_SUPPRESSION_MASK, leave_supp_enabled); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPSuppression - * Description: - * Get the suppression function - * Input: - * report_supp_enabled - Report suppression, 1:Enable, 0:disable - * leave_supp_enabled - Leave suppression, 1:Enable, 0:disable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPSuppression(rtk_uint32 *report_supp_enabled, rtk_uint32 *leave_supp_enabled) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_REPORT_SUPPRESSION_MASK, report_supp_enabled); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_LEAVE_SUPPRESSION_MASK, leave_supp_enabled); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPQueryRX - * Description: - * Set port-based Query packet RX allowance - * Input: - * port - port number - * allow_query - allowance of Query packet RX, 1:Allow, 0:Drop - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPQueryRX(rtk_uint32 port, rtk_uint32 allow_query) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* Allow Query */ - if (port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_QUERY_MASK, allow_query); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_QUERY_MASK, allow_query); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPQueryRX - * Description: - * Get port-based Query packet RX allowance - * Input: - * port - port number - * Output: - * allow_query - allowance of Query packet RX, 1:Allow, 0:Drop - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPQueryRX(rtk_uint32 port, rtk_uint32 *allow_query) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* Allow Query */ - if (port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_QUERY_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_QUERY_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - *allow_query = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPReportRX - * Description: - * Set port-based Report packet RX allowance - * Input: - * port - port number - * allow_report - allowance of Report packet RX, 1:Allow, 0:Drop - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPReportRX(rtk_uint32 port, rtk_uint32 allow_report) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - /* Allow Report */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_REPORT_MASK, allow_report); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_REPORT_MASK, allow_report); - if(retVal != RT_ERR_OK) - return retVal; - } - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPReportRX - * Description: - * Get port-based Report packet RX allowance - * Input: - * port - port number - * Output: - * allow_report - allowance of Report packet RX, 1:Allow, 0:Drop - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPReportRX(rtk_uint32 port, rtk_uint32 *allow_report) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - /* Allow Report */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_REPORT_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_REPORT_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - *allow_report = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPLeaveRX - * Description: - * Set port-based Leave packet RX allowance - * Input: - * port - port number - * allow_leave - allowance of Leave packet RX, 1:Allow, 0:Drop - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPLeaveRX(rtk_uint32 port, rtk_uint32 allow_leave) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - /* Allow Leave */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_LEAVE_MASK, allow_leave); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_LEAVE_MASK, allow_leave); - if(retVal != RT_ERR_OK) - return retVal; - } - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPLeaveRX - * Description: - * Get port-based Leave packet RX allowance - * Input: - * port - port number - * Output: - * allow_leave - allowance of Leave packet RX, 1:Allow, 0:Drop - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPLeaveRX(rtk_uint32 port, rtk_uint32 *allow_leave) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - /* Allow Leave */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_LEAVE_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_LEAVE_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *allow_leave = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPMRPRX - * Description: - * Set port-based Multicast Routing Protocol packet RX allowance - * Input: - * port - port number - * allow_mrp - allowance of Multicast Routing Protocol packet RX, 1:Allow, 0:Drop - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPMRPRX(rtk_uint32 port, rtk_uint32 allow_mrp) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - /* Allow Multicast Routing Protocol */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MRP_MASK, allow_mrp); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MRP_MASK, allow_mrp); - if(retVal != RT_ERR_OK) - return retVal; - } - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPMRPRX - * Description: - * Get port-based Multicast Routing Protocol packet RX allowance - * Input: - * port - port number - * Output: - * allow_mrp - allowance of Multicast Routing Protocol packet RX, 1:Allow, 0:Drop - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPMRPRX(rtk_uint32 port, rtk_uint32 *allow_mrp) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* Allow Multicast Routing Protocol */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MRP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MRP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - *allow_mrp = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPMcDataRX - * Description: - * Set port-based Multicast data packet RX allowance - * Input: - * port - port number - * allow_mcdata - allowance of Multicast data packet RX, 1:Allow, 0:Drop - * Output: - * none - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPMcDataRX(rtk_uint32 port, rtk_uint32 allow_mcdata) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* Allow Multicast Data */ - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MC_DATA_MASK, allow_mcdata); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MC_DATA_MASK, allow_mcdata); - if(retVal != RT_ERR_OK) - return retVal; - } - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPMcDataRX - * Description: - * Get port-based Multicast data packet RX allowance - * Input: - * port - port number - * Output: - * allow_mcdata - allowance of Multicast data packet RX, 1:Allow, 0:Drop - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPMcDataRX(rtk_uint32 port, rtk_uint32 *allow_mcdata) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* Allow Multicast data */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MC_DATA_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_ALLOW_MC_DATA_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *allow_mcdata = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPv1Opeartion - * Description: - * Set port-based IGMPv1 Control packet action - * Input: - * port - port number - * igmpv1_op - IGMPv1 control packet action - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPv1Opeartion(rtk_uint32 port, rtk_uint32 igmpv1_op) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(igmpv1_op >= PROTOCOL_OP_END) - return RT_ERR_INPUT; - - /* IGMPv1 operation */ - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_IGMPV1_OP_MASK, igmpv1_op); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_IGMPV1_OP_MASK, igmpv1_op); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPv1Opeartion - * Description: - * Get port-based IGMPv1 Control packet action - * Input: - * port - port number - * Output: - * igmpv1_op - IGMPv1 control packet action - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPv1Opeartion(rtk_uint32 port, rtk_uint32 *igmpv1_op) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* IGMPv1 operation */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_IGMPV1_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_IGMPV1_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *igmpv1_op = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPv2Opeartion - * Description: - * Set port-based IGMPv2 Control packet action - * Input: - * port - port number - * igmpv2_op - IGMPv2 control packet action - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPv2Opeartion(rtk_uint32 port, rtk_uint32 igmpv2_op) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(igmpv2_op >= PROTOCOL_OP_END) - return RT_ERR_INPUT; - - /* IGMPv2 operation */ - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_IGMPV2_OP_MASK, igmpv2_op); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_IGMPV2_OP_MASK, igmpv2_op); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPv2Opeartion - * Description: - * Get port-based IGMPv2 Control packet action - * Input: - * port - port number - * Output: - * igmpv2_op - IGMPv2 control packet action - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPv2Opeartion(rtk_uint32 port, rtk_uint32 *igmpv2_op) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* IGMPv2 operation */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_IGMPV2_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_IGMPV2_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *igmpv2_op = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPv3Opeartion - * Description: - * Set port-based IGMPv3 Control packet action - * Input: - * port - port number - * igmpv3_op - IGMPv3 control packet action - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPv3Opeartion(rtk_uint32 port, rtk_uint32 igmpv3_op) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(igmpv3_op >= PROTOCOL_OP_END) - return RT_ERR_INPUT; - - /* IGMPv3 operation */ - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_IGMPV3_OP_MASK, igmpv3_op); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_IGMPV3_OP_MASK, igmpv3_op); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPv3Opeartion - * Description: - * Get port-based IGMPv3 Control packet action - * Input: - * port - port number - * Output: - * igmpv3_op - IGMPv3 control packet action - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPv3Opeartion(rtk_uint32 port, rtk_uint32 *igmpv3_op) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* IGMPv3 operation */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_IGMPV3_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_IGMPV3_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *igmpv3_op = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicMLDv1Opeartion - * Description: - * Set port-based MLDv1 Control packet action - * Input: - * port - port number - * mldv1_op - MLDv1 control packet action - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMLDv1Opeartion(rtk_uint32 port, rtk_uint32 mldv1_op) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(mldv1_op >= PROTOCOL_OP_END) - return RT_ERR_INPUT; - - /* MLDv1 operation */ - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_MLDv1_OP_MASK, mldv1_op); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_MLDv1_OP_MASK, mldv1_op); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicMLDv1Opeartion - * Description: - * Get port-based MLDv1 Control packet action - * Input: - * port - port number - * Output: - * mldv1_op - MLDv1 control packet action - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMLDv1Opeartion(rtk_uint32 port, rtk_uint32 *mldv1_op) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* MLDv1 operation */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_MLDv1_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_MLDv1_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *mldv1_op = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicMLDv2Opeartion - * Description: - * Set port-based MLDv2 Control packet action - * Input: - * port - port number - * mldv2_op - MLDv2 control packet action - * Output: - * none - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMLDv2Opeartion(rtk_uint32 port, rtk_uint32 mldv2_op) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(mldv2_op >= PROTOCOL_OP_END) - return RT_ERR_INPUT; - - /* MLDv2 operation */ - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_MLDv2_OP_MASK, mldv2_op); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_MLDv2_OP_MASK, mldv2_op); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicMLDv2Opeartion - * Description: - * Get port-based MLDv2 Control packet action - * Input: - * port - port number - * Output: - * mldv2_op - MLDv2 control packet action - * Return: - * RT_ERR_OK - Success - * RT_ERR_PORT_ID - Error PORT ID - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMLDv2Opeartion(rtk_uint32 port, rtk_uint32 *mldv2_op) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - /* MLDv2 operation */ - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT0_CONTROL + port, RTL8367C_IGMP_PORT0_CONTROL_MLDv2_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT8_CONTROL + port - 8, RTL8367C_IGMP_PORT0_CONTROL_MLDv2_OP_MASK, &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *mldv2_op = value; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPPortMAXGroup - * Description: - * Set per-port Max group number - * Input: - * port - Physical port number (0~7) - * max_group - max IGMP group - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPPortMAXGroup(rtk_uint32 port, rtk_uint32 max_group) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(max_group > RTL8367C_IGMP_MAX_GOUP) - return RT_ERR_OUT_OF_RANGE; - - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT01_MAX_GROUP + (port/2), RTL8367C_PORT0_MAX_GROUP_MASK << (RTL8367C_PORT1_MAX_GROUP_OFFSET * (port%2)), max_group); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_PORT89_MAX_GROUP + (port/2), RTL8367C_PORT0_MAX_GROUP_MASK << (RTL8367C_PORT1_MAX_GROUP_OFFSET * (port%2)), max_group); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicIGMPPortMAXGroup - * Description: - * Get per-port Max group number - * Input: - * port - Physical port number (0~7) - * max_group - max IGMP group - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPPortMAXGroup(rtk_uint32 port, rtk_uint32 *max_group) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT01_MAX_GROUP + (port/2), RTL8367C_PORT0_MAX_GROUP_MASK << (RTL8367C_PORT1_MAX_GROUP_OFFSET * (port%2)), &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT89_MAX_GROUP + (port/2), RTL8367C_PORT0_MAX_GROUP_MASK << (RTL8367C_PORT1_MAX_GROUP_OFFSET * (port%2)), &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *max_group = value; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicIGMPPortCurrentGroup - * Description: - * Get per-port current group number - * Input: - * port - Physical port number (0~7) - * current_group - current IGMP group - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPPortCurrentGroup(rtk_uint32 port, rtk_uint32 *current_group) -{ - ret_t retVal; - rtk_uint32 value; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT01_CURRENT_GROUP + (port/2), RTL8367C_PORT0_CURRENT_GROUP_MASK << (RTL8367C_PORT1_CURRENT_GROUP_OFFSET * (port%2)), &value); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_PORT89_CURRENT_GROUP + ((port - 8)/2), RTL8367C_PORT0_CURRENT_GROUP_MASK << (RTL8367C_PORT1_CURRENT_GROUP_OFFSET * (port%2)), &value); - if(retVal != RT_ERR_OK) - return retVal; - } - - *current_group = value; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicIGMPGroup - * Description: - * Get IGMP group - * Input: - * idx - Group index (0~255) - * valid - valid bit - * grp - IGMP group - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Group index is out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPGroup(rtk_uint32 idx, rtk_uint32 *valid, rtl8367c_igmpgroup *grp) -{ - ret_t retVal; - rtk_uint32 regAddr, regData; - rtk_uint32 i; - rtk_uint32 groupInfo = 0; - - if(idx > RTL8367C_IGMP_MAX_GOUP) - return RT_ERR_OUT_OF_RANGE; - - /* Write ACS_ADR register for data bits */ - regAddr = RTL8367C_TABLE_ACCESS_ADDR_REG; - regData = idx; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write ACS_CMD register */ - regAddr = RTL8367C_TABLE_ACCESS_CTRL_REG; - regData = RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_READ, TB_TARGET_IGMP_GROUP); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Read Data Bits */ - regAddr = RTL8367C_TABLE_ACCESS_RDDATA_BASE; - for(i = 0 ;i <= 1; i++) - { - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - groupInfo |= ((regData & 0xFFFF) << (i * 16)); - regAddr ++; - } - - grp->p0_timer = groupInfo & 0x00000007; - grp->p1_timer = (groupInfo >> 3) & 0x00000007; - grp->p2_timer = (groupInfo >> 6) & 0x00000007; - grp->p3_timer = (groupInfo >> 9) & 0x00000007; - grp->p4_timer = (groupInfo >> 12) & 0x00000007; - grp->p5_timer = (groupInfo >> 15) & 0x00000007; - grp->p6_timer = (groupInfo >> 18) & 0x00000007; - grp->p7_timer = (groupInfo >> 21) & 0x00000007; - grp->report_supp_flag = (groupInfo >> 24) & 0x00000001; - grp->p8_timer = (groupInfo >> 25) & 0x00000007; - grp->p9_timer = (groupInfo >> 28) & 0x00000007; - grp->p10_timer = (groupInfo >> 31) & 0x00000001; - - regAddr = RTL8367C_TABLE_ACCESS_RDDATA_BASE + 2; - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - grp->p10_timer |= (regData & 0x00000003) << 1; - - /* Valid bit */ - retVal = rtl8367c_getAsicReg(RTL8367C_IGMP_GROUP_USAGE_REG(idx), ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *valid = ((regData & (0x0001 << (idx %16))) != 0) ? 1 : 0; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicIpMulticastPortIsoLeaky - * Description: - * Set IP multicast Port Isolation leaky - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicIpMulticastPortIsoLeaky(rtk_uint32 port, rtk_uint32 enabled) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_IPMCAST_PORTISO_LEAKY_REG, (0x0001 << port), enabled); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIpMulticastPortIsoLeaky - * Description: - * Get IP multicast Port Isolation leaky - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIpMulticastPortIsoLeaky(rtk_uint32 port, rtk_uint32 *enabled) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_IPMCAST_PORTISO_LEAKY_REG, (0x0001 << port), ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *enabled = regData; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPReportLeaveFlood - * Description: - * Set IGMP/MLD Report/Leave flood - * Input: - * flood - 0: Reserved, 1: flooding to router ports, 2: flooding to all ports, 3: flooding to router port or to all ports if there is no router port - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPReportLeaveFlood(rtk_uint32 flood) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG3, RTL8367C_REPORT_LEAVE_FORWARD_MASK, flood); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPReportLeaveFlood - * Description: - * Get IGMP/MLD Report/Leave flood - * Input: - * None - * Output: - * pflood - 0: Reserved, 1: flooding to router ports, 2: flooding to all ports, 3: flooding to router port or to all ports if there is no router port - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPReportLeaveFlood(rtk_uint32 *pFlood) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_IGMP_MLD_CFG3, RTL8367C_REPORT_LEAVE_FORWARD_MASK, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pFlood = regData; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPDropLeaveZero - * Description: - * Set the function of droppping Leave packet with group IP = 0.0.0.0 - * Input: - * drop - 1: Drop, 0:Bypass - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPDropLeaveZero(rtk_uint32 drop) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG1, RTL8367C_DROP_LEAVE_ZERO_OFFSET, drop); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPDropLeaveZero - * Description: - * Get the function of droppping Leave packet with group IP = 0.0.0.0 - * Input: - * None - * Output: - * pDrop - 1: Drop, 0:Bypass - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPDropLeaveZero(rtk_uint32 *pDrop) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG1, RTL8367C_DROP_LEAVE_ZERO_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pDrop = regData; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPBypassStormCTRL - * Description: - * Set the function of bypass strom control for IGMP/MLD packet - * Input: - * bypass - 1: Bypass, 0:not bypass - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPBypassStormCTRL(rtk_uint32 bypass) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_DISCARD_STORM_FILTER_OFFSET, bypass); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPBypassStormCTRL - * Description: - * Set the function of bypass strom control for IGMP/MLD packet - * Input: - * None - * Output: - * pBypass - 1: Bypass, 0:not bypass - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPBypassStormCTRL(rtk_uint32 *pBypass) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_DISCARD_STORM_FILTER_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pBypass = regData; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPIsoLeaky - * Description: - * Set Port Isolation leaky for IGMP/MLD packet - * Input: - * leaky - 1: Leaky, 0:not leaky - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPIsoLeaky(rtk_uint32 leaky) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_PORTISO_LEAKY_OFFSET, leaky); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPIsoLeaky - * Description: - * Get Port Isolation leaky for IGMP/MLD packet - * Input: - * Noen - * Output: - * pLeaky - 1: Leaky, 0:not leaky - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPIsoLeaky(rtk_uint32 *pLeaky) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_PORTISO_LEAKY_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pLeaky = regData; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPVLANLeaky - * Description: - * Set VLAN leaky for IGMP/MLD packet - * Input: - * leaky - 1: Leaky, 0:not leaky - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPVLANLeaky(rtk_uint32 leaky) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_VLAN_LEAKY_OFFSET, leaky); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPVLANLeaky - * Description: - * Get VLAN leaky for IGMP/MLD packet - * Input: - * Noen - * Output: - * pLeaky - 1: Leaky, 0:not leaky - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPVLANLeaky(rtk_uint32 *pLeaky) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG0, RTL8367C_IGMP_MLD_VLAN_LEAKY_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pLeaky = regData; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicIGMPBypassGroup - * Description: - * Set IGMP/MLD Bypass group - * Input: - * bypassType - Bypass type - * enabled - enabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicIGMPBypassGroup(rtk_uint32 bypassType, rtk_uint32 enabled) -{ - ret_t retVal; - rtk_uint32 offset; - - switch(bypassType) - { - case BYPASS_224_0_0_X: - offset = RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_0_OFFSET; - break; - case BYPASS_224_0_1_X: - offset = RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_1_OFFSET; - break; - case BYPASS_239_255_255_X: - offset = RTL8367C_IGMP_MLD_IP4_BYPASS_239_255_255_OFFSET; - break; - case BYPASS_IPV6_00XX: - offset = RTL8367C_IGMP_MLD_IP6_BYPASS_OFFSET; - break; - default: - return RT_ERR_INPUT; - } - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG3, offset, enabled); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicIGMPBypassGroup - * Description: - * Get IGMP/MLD Bypass group - * Input: - * bypassType - Bypass type - * Output: - * pEnabled - enabled - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicIGMPBypassGroup(rtk_uint32 bypassType, rtk_uint32 *pEnabled) -{ - ret_t retVal; - rtk_uint32 offset; - - switch(bypassType) - { - case BYPASS_224_0_0_X: - offset = RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_0_OFFSET; - break; - case BYPASS_224_0_1_X: - offset = RTL8367C_IGMP_MLD_IP4_BYPASS_224_0_1_OFFSET; - break; - case BYPASS_239_255_255_X: - offset = RTL8367C_IGMP_MLD_IP4_BYPASS_239_255_255_OFFSET; - break; - case BYPASS_IPV6_00XX: - offset = RTL8367C_IGMP_MLD_IP6_BYPASS_OFFSET; - break; - default: - return RT_ERR_INPUT; - } - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_IGMP_MLD_CFG3, offset, pEnabled); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_inbwctrl.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_inbwctrl.c deleted file mode 100644 index abb36bec2d..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_inbwctrl.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Ingress bandwidth control related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsicPortIngressBandwidth - * Description: - * Set per-port total ingress bandwidth - * Input: - * port - Physical port number (0~7) - * bandwidth - The total ingress bandwidth (unit: 8Kbps), 0x1FFFF:disable - * preifg - Include preamble and IFG, 0:Exclude, 1:Include - * enableFC - Action when input rate exceeds. 0: Drop 1: Flow Control - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicPortIngressBandwidth(rtk_uint32 port, rtk_uint32 bandwidth, rtk_uint32 preifg, rtk_uint32 enableFC) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 regAddr; - - /* Invalid input parameter */ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(bandwidth > RTL8367C_QOS_GRANULARTY_MAX) - return RT_ERR_OUT_OF_RANGE; - - regAddr = RTL8367C_INGRESSBW_PORT_RATE_LSB_REG(port); - regData = bandwidth & RTL8367C_QOS_GRANULARTY_LSB_MASK; - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr += 1; - regData = (bandwidth & RTL8367C_QOS_GRANULARTY_MSB_MASK) >> RTL8367C_QOS_GRANULARTY_MSB_OFFSET; - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_INGRESSBW_PORT0_RATE_CTRL1_INGRESSBW_RATE16_MASK, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_PORT_MISC_CFG_REG(port); - retVal = rtl8367c_setAsicRegBit(regAddr, RTL8367C_PORT0_MISC_CFG_INGRESSBW_IFG_OFFSET, preifg); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_PORT_MISC_CFG_REG(port); - retVal = rtl8367c_setAsicRegBit(regAddr, RTL8367C_PORT0_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET, enableFC); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicPortIngressBandwidth - * Description: - * Get per-port total ingress bandwidth - * Input: - * port - Physical port number (0~7) - * pBandwidth - The total ingress bandwidth (unit: 8Kbps), 0x1FFFF:disable - * pPreifg - Include preamble and IFG, 0:Exclude, 1:Include - * pEnableFC - Action when input rate exceeds. 0: Drop 1: Flow Control - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortIngressBandwidth(rtk_uint32 port, rtk_uint32* pBandwidth, rtk_uint32* pPreifg, rtk_uint32* pEnableFC) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 regAddr; - - /* Invalid input parameter */ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - regAddr = RTL8367C_INGRESSBW_PORT_RATE_LSB_REG(port); - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pBandwidth = regData; - - regAddr += 1; - retVal = rtl8367c_getAsicRegBits(regAddr, RTL8367C_INGRESSBW_PORT0_RATE_CTRL1_INGRESSBW_RATE16_MASK, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pBandwidth |= (regData << RTL8367C_QOS_GRANULARTY_MSB_OFFSET); - - regAddr = RTL8367C_PORT_MISC_CFG_REG(port); - retVal = rtl8367c_getAsicRegBit(regAddr, RTL8367C_PORT0_MISC_CFG_INGRESSBW_IFG_OFFSET, pPreifg); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_PORT_MISC_CFG_REG(port); - retVal = rtl8367c_getAsicRegBit(regAddr, RTL8367C_PORT0_MISC_CFG_INGRESSBW_FLOWCTRL_OFFSET, pEnableFC); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicPortIngressBandwidthBypass - * Description: - * Set ingress bandwidth control bypasss 8899, RMA 01-80-C2-00-00-xx and IGMP - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortIngressBandwidthBypass(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_SW_DUMMY0, RTL8367C_INGRESSBW_BYPASS_EN_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortIngressBandwidthBypass - * Description: - * Set ingress bandwidth control bypasss 8899, RMA 01-80-C2-00-00-xx and IGMP - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortIngressBandwidthBypass(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_SW_DUMMY0, RTL8367C_INGRESSBW_BYPASS_EN_OFFSET, pEnabled); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c deleted file mode 100644 index fb6cbcdf1f..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_interrupt.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Interrupt related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsicInterruptPolarity - * Description: - * Set interrupt trigger polarity - * Input: - * polarity - 0:pull high 1: pull low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicInterruptPolarity(rtk_uint32 polarity) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_INTR_CTRL, RTL8367C_INTR_CTRL_OFFSET, polarity); -} -/* Function Name: - * rtl8367c_getAsicInterruptPolarity - * Description: - * Get interrupt trigger polarity - * Input: - * pPolarity - 0:pull high 1: pull low - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptPolarity(rtk_uint32* pPolarity) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_INTR_CTRL, RTL8367C_INTR_CTRL_OFFSET, pPolarity); -} -/* Function Name: - * rtl8367c_setAsicInterruptMask - * Description: - * Set interrupt enable mask - * Input: - * imr - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicInterruptMask(rtk_uint32 imr) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_INTR_IMR, imr); -} -/* Function Name: - * rtl8367c_getAsicInterruptMask - * Description: - * Get interrupt enable mask - * Input: - * pImr - Interrupt mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptMask(rtk_uint32* pImr) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_INTR_IMR, pImr); -} -/* Function Name: - * rtl8367c_setAsicInterruptMask - * Description: - * Clear interrupt enable mask - * Input: - * ims - Interrupt status mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * This API can be used to clear ASIC interrupt status and register will be cleared by writting 1. - * [0]:Link change, - * [1]:Share meter exceed, - * [2]:Learn number overed, - * [3]:Speed Change, - * [4]:Tx special congestion - * [5]:1 second green feature - * [6]:loop detection - * [7]:interrupt from 8051 - * [8]:Cable diagnostic finish - * [9]:ACL action interrupt trigger - * [11]: Silent Start - */ -ret_t rtl8367c_setAsicInterruptStatus(rtk_uint32 ims) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_INTR_IMS, ims); -} -/* Function Name: - * rtl8367c_getAsicInterruptStatus - * Description: - * Get interrupt enable mask - * Input: - * pIms - Interrupt status mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptStatus(rtk_uint32* pIms) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_INTR_IMS, pIms); -} -/* Function Name: - * rtl8367c_setAsicInterruptRelatedStatus - * Description: - * Clear interrupt status - * Input: - * type - per port Learn over, per-port speed change, per-port special congest, share meter exceed status - * status - exceed status, write 1 to clear - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicInterruptRelatedStatus(rtk_uint32 type, rtk_uint32 status) -{ - CONST rtk_uint32 indicatorAddress[INTRST_END] = {RTL8367C_REG_LEARN_OVER_INDICATOR, - RTL8367C_REG_SPEED_CHANGE_INDICATOR, - RTL8367C_REG_SPECIAL_CONGEST_INDICATOR, - RTL8367C_REG_PORT_LINKDOWN_INDICATOR, - RTL8367C_REG_PORT_LINKUP_INDICATOR, - RTL8367C_REG_METER_OVERRATE_INDICATOR0, - RTL8367C_REG_METER_OVERRATE_INDICATOR1, - RTL8367C_REG_RLDP_LOOPED_INDICATOR, - RTL8367C_REG_RLDP_RELEASED_INDICATOR, - RTL8367C_REG_SYSTEM_LEARN_OVER_INDICATOR}; - - if(type >= INTRST_END ) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicReg(indicatorAddress[type], status); -} -/* Function Name: - * rtl8367c_getAsicInterruptRelatedStatus - * Description: - * Get interrupt status - * Input: - * type - per port Learn over, per-port speed change, per-port special congest, share meter exceed status - * pStatus - exceed status, write 1 to clear - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicInterruptRelatedStatus(rtk_uint32 type, rtk_uint32* pStatus) -{ - CONST rtk_uint32 indicatorAddress[INTRST_END] = {RTL8367C_REG_LEARN_OVER_INDICATOR, - RTL8367C_REG_SPEED_CHANGE_INDICATOR, - RTL8367C_REG_SPECIAL_CONGEST_INDICATOR, - RTL8367C_REG_PORT_LINKDOWN_INDICATOR, - RTL8367C_REG_PORT_LINKUP_INDICATOR, - RTL8367C_REG_METER_OVERRATE_INDICATOR0, - RTL8367C_REG_METER_OVERRATE_INDICATOR1, - RTL8367C_REG_RLDP_LOOPED_INDICATOR, - RTL8367C_REG_RLDP_RELEASED_INDICATOR, - RTL8367C_REG_SYSTEM_LEARN_OVER_INDICATOR}; - - if(type >= INTRST_END ) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_getAsicReg(indicatorAddress[type], pStatus); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_led.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_led.c deleted file mode 100644 index 1189028161..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_led.c +++ /dev/null @@ -1,727 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : LED related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsicLedIndicateInfoConfig - * Description: - * Set Leds indicated information mode - * Input: - * ledno - LED group number. There are 1 to 1 led mapping to each port in each led group - * config - Support 16 types configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * The API can set LED indicated information configuration for each LED group with 1 to 1 led mapping to each port. - * Definition LED Statuses Description - * 0000 LED_Off LED pin Tri-State. - * 0001 Dup/Col Collision, Full duplex Indicator. Blinking every 43ms when collision happens. Low for full duplex, and high for half duplex mode. - * 0010 Link/Act Link, Activity Indicator. Low for link established. Link/Act Blinks every 43ms when the corresponding port is transmitting or receiving. - * 0011 Spd1000 1000Mb/s Speed Indicator. Low for 1000Mb/s. - * 0100 Spd100 100Mb/s Speed Indicator. Low for 100Mb/s. - * 0101 Spd10 10Mb/s Speed Indicator. Low for 10Mb/s. - * 0110 Spd1000/Act 1000Mb/s Speed/Activity Indicator. Low for 1000Mb/s. Blinks every 43ms when the corresponding port is transmitting or receiving. - * 0111 Spd100/Act 100Mb/s Speed/Activity Indicator. Low for 100Mb/s. Blinks every 43ms when the corresponding port is transmitting or receiving. - * 1000 Spd10/Act 10Mb/s Speed/Activity Indicator. Low for 10Mb/s. Blinks every 43ms when the corresponding port is transmitting or receiving. - * 1001 Spd100 (10)/Act 10/100Mb/s Speed/Activity Indicator. Low for 10/100Mb/s. Blinks every 43ms when the corresponding port is transmitting or receiving. - * 1010 Fiber Fiber link Indicator. Low for Fiber. - * 1011 Fault Auto-negotiation Fault Indicator. Low for Fault. - * 1100 Link/Rx Link, Activity Indicator. Low for link established. Link/Rx Blinks every 43ms when the corresponding port is transmitting. - * 1101 Link/Tx Link, Activity Indicator. Low for link established. Link/Tx Blinks every 43ms when the corresponding port is receiving. - * 1110 Master Link on Master Indicator. Low for link Master established. - * 1111 LED_Force Force LED output, LED output value reference - */ -ret_t rtl8367c_setAsicLedIndicateInfoConfig(rtk_uint32 ledno, rtk_uint32 config) -{ - ret_t retVal; - CONST rtk_uint16 bits[RTL8367C_LEDGROUPNO] = {RTL8367C_LED0_CFG_MASK, RTL8367C_LED1_CFG_MASK, RTL8367C_LED2_CFG_MASK}; - - if(ledno >= RTL8367C_LEDGROUPNO) - return RT_ERR_OUT_OF_RANGE; - - if(config >= LEDCONF_END) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_CONFIGURATION, RTL8367C_LED_CONFIG_SEL_OFFSET, 0); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_LED_CONFIGURATION, bits[ledno], config); -} -/* Function Name: - * rtl8367c_getAsicLedIndicateInfoConfig - * Description: - * Get Leds indicated information mode - * Input: - * ledno - LED group number. There are 1 to 1 led mapping to each port in each led group - * pConfig - Support 16 types configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicLedIndicateInfoConfig(rtk_uint32 ledno, rtk_uint32* pConfig) -{ - CONST rtk_uint16 bits[RTL8367C_LEDGROUPNO]= {RTL8367C_LED0_CFG_MASK, RTL8367C_LED1_CFG_MASK, RTL8367C_LED2_CFG_MASK}; - - if(ledno >= RTL8367C_LEDGROUPNO) - return RT_ERR_OUT_OF_RANGE; - - /* Get register value */ - return rtl8367c_getAsicRegBits(RTL8367C_REG_LED_CONFIGURATION, bits[ledno], pConfig); -} -/* Function Name: - * rtl8367c_setAsicLedGroupMode - * Description: - * Set Led Group mode - * Input: - * mode - LED mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicLedGroupMode(rtk_uint32 mode) -{ - ret_t retVal; - - /* Invalid input parameter */ - if(mode >= RTL8367C_LED_MODE_END) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_CONFIGURATION, RTL8367C_LED_CONFIG_SEL_OFFSET, 1); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_LED_CONFIGURATION, RTL8367C_DATA_LED_MASK, mode); -} -/* Function Name: - * rtl8367c_getAsicLedGroupMode - * Description: - * Get Led Group mode - * Input: - * pMode - LED mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLedGroupMode(rtk_uint32* pMode) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LED_CONFIGURATION, RTL8367C_LED_CONFIG_SEL_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - if(regData!=1) - return RT_ERR_FAILED; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_LED_CONFIGURATION, RTL8367C_DATA_LED_MASK, pMode); -} -/* Function Name: - * rtl8367c_setAsicForceLeds - * Description: - * Set group LED mode - * Input: - * port - Physical port number (0~7) - * group - LED group number - * mode - LED mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicForceLed(rtk_uint32 port, rtk_uint32 group, rtk_uint32 mode) -{ - rtk_uint16 regAddr; - ret_t retVal; - - /* Invalid input parameter */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(group >= RTL8367C_LEDGROUPNO) - return RT_ERR_OUT_OF_RANGE; - - if(mode >= LEDFORCEMODE_END) - return RT_ERR_OUT_OF_RANGE; - /* Set Related Registers */ - if(port < 8){ - regAddr = RTL8367C_LED_FORCE_MODE_BASE + (group << 1); - if((retVal = rtl8367c_setAsicRegBits(regAddr, 0x3 << (port * 2), mode)) != RT_ERR_OK) - return retVal; - }else if(port >= 8){ - regAddr = RTL8367C_REG_CPU_FORCE_LED0_CFG1 + (group << 1); - if((retVal = rtl8367c_setAsicRegBits(regAddr, 0x3 << ((port-8) * 2), mode)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicForceLed - * Description: - * Get group LED mode - * Input: - * port - Physical port number (0~7) - * group - LED group number - * pMode - LED mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicForceLed(rtk_uint32 port, rtk_uint32 group, rtk_uint32* pMode) -{ - rtk_uint16 regAddr; - ret_t retVal; - - /* Invalid input parameter */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(group >= RTL8367C_LEDGROUPNO) - return RT_ERR_INPUT; - - /* Get Related Registers */ - if(port < 8){ - regAddr = RTL8367C_LED_FORCE_MODE_BASE + (group << 1); - if((retVal = rtl8367c_getAsicRegBits(regAddr, 0x3 << (port * 2), pMode)) != RT_ERR_OK) - return retVal; - }else if(port >= 8){ - regAddr = RTL8367C_REG_CPU_FORCE_LED0_CFG1 + (group << 1); - if((retVal = rtl8367c_getAsicRegBits(regAddr, 0x3 << ((port-8) * 2), pMode)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicForceGroupLed - * Description: - * Turn on/off Led of all ports - * Input: - * group - LED group number - * mode - 0b00:normal mode, 0b01:force blink, 0b10:force off, 0b11:force on - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicForceGroupLed(rtk_uint32 groupmask, rtk_uint32 mode) -{ - ret_t retVal; - rtk_uint32 i,bitmask; - CONST rtk_uint16 bits[3]= {0x0004,0x0010,0x0040}; - - /* Invalid input parameter */ - if(groupmask > RTL8367C_LEDGROUPMASK) - return RT_ERR_OUT_OF_RANGE; - - if(mode >= LEDFORCEMODE_END) - return RT_ERR_OUT_OF_RANGE; - - bitmask = 0; - for(i = 0; i < RTL8367C_LEDGROUPNO; i++) - { - if(groupmask & (1 << i)) - { - bitmask = bitmask | bits[i]; - } - - } - - retVal = rtl8367c_setAsicRegBits(RTL8367C_LED_FORCE_CTRL, RTL8367C_LED_FORCE_MODE_MASK, bitmask); - - retVal = rtl8367c_setAsicRegBits(RTL8367C_LED_FORCE_CTRL, RTL8367C_FORCE_MODE_MASK, mode); - - if(LEDFORCEMODE_NORMAL == mode) - retVal = rtl8367c_setAsicRegBits(RTL8367C_LED_FORCE_CTRL, RTL8367C_LED_FORCE_MODE_MASK, 0); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicForceGroupLed - * Description: - * Turn on/off Led of all ports - * Input: - * group - LED group number - * pMode - 0b00:normal mode, 0b01:force blink, 0b10:force off, 0b11:force on - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicForceGroupLed(rtk_uint32* groupmask, rtk_uint32* pMode) -{ - ret_t retVal; - rtk_uint32 i,regData; - CONST rtk_uint16 bits[3] = {0x0004,0x0010,0x0040}; - - /* Get Related Registers */ - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_LED_FORCE_CTRL, RTL8367C_LED_FORCE_MODE_MASK, ®Data)) != RT_ERR_OK) - return retVal; - - for(i = 0; i< RTL8367C_LEDGROUPNO; i++) - { - if((regData & bits[i]) == bits[i]) - { - *groupmask = *groupmask | (1 << i); - } - } - - return rtl8367c_getAsicRegBits(RTL8367C_LED_FORCE_CTRL, RTL8367C_FORCE_MODE_MASK, pMode); -} -/* Function Name: - * rtl8367c_setAsicLedBlinkRate - * Description: - * Set led blinking rate at mode 0 to mode 3 - * Input: - * blinkRate - Support 6 blink rates - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * LED blink rate can be at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms - */ -ret_t rtl8367c_setAsicLedBlinkRate(rtk_uint32 blinkRate) -{ - if(blinkRate >= LEDBLINKRATE_END) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_LED_MODE, RTL8367C_SEL_LEDRATE_MASK, blinkRate); -} -/* Function Name: - * rtl8367c_getAsicLedBlinkRate - * Description: - * Get led blinking rate at mode 0 to mode 3 - * Input: - * pBlinkRate - Support 6 blink rates - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLedBlinkRate(rtk_uint32* pBlinkRate) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_LED_MODE, RTL8367C_SEL_LEDRATE_MASK, pBlinkRate); -} -/* Function Name: - * rtl8367c_setAsicLedForceBlinkRate - * Description: - * Set LEd blinking rate for force mode led - * Input: - * blinkRate - Support 6 blink rates - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicLedForceBlinkRate(rtk_uint32 blinkRate) -{ - if(blinkRate >= LEDFORCERATE_END) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_LED_MODE, RTL8367C_FORCE_RATE_MASK, blinkRate); -} -/* Function Name: - * rtl8367c_getAsicLedForceBlinkRate - * Description: - * Get LED blinking rate for force mode led - * Input: - * pBlinkRate - Support 6 blink rates - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLedForceBlinkRate(rtk_uint32* pBlinkRate) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_LED_MODE, RTL8367C_FORCE_RATE_MASK, pBlinkRate); -} - -/* -@func ret_t | rtl8367c_setAsicLedGroupEnable | Turn on/off Led of all system ports -@parm rtk_uint32 | group | LED group id. -@parm rtk_uint32 | portmask | LED port mask. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_PORT_ID | Invalid port number. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can turn on/off leds of dedicated port while indicated information configuration of LED group is set to force mode. - */ -ret_t rtl8367c_setAsicLedGroupEnable(rtk_uint32 group, rtk_uint32 portmask) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 regDataMask; - - if ( group >= RTL8367C_LEDGROUPNO ) - return RT_ERR_INPUT; - - regAddr = RTL8367C_REG_PARA_LED_IO_EN1 + group/2; - regDataMask = 0xFF << ((group%2)*8); - retVal = rtl8367c_setAsicRegBits(regAddr, regDataMask, portmask&0xff); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_REG_PARA_LED_IO_EN3; - regDataMask = 0x3 << (group*2); - retVal = rtl8367c_setAsicRegBits(regAddr, regDataMask, (portmask>>8)&0x7); - if(retVal != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_getAsicLedGroupEnable | Get on/off status of Led of all system ports -@parm rtk_uint32 | group | LED group id. -@parm rtk_uint32 | *portmask | LED port mask. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_PORT_ID | Invalid port number. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can turn on/off leds of dedicated port while indicated information configuration of LED group is set to force mode. - */ -ret_t rtl8367c_getAsicLedGroupEnable(rtk_uint32 group, rtk_uint32 *portmask) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 regDataMask,regData; - - if ( group >= RTL8367C_LEDGROUPNO ) - return RT_ERR_INPUT; - - regAddr = RTL8367C_REG_PARA_LED_IO_EN1 + group/2; - regDataMask = 0xFF << ((group%2)*8); - retVal = rtl8367c_getAsicRegBits(regAddr, regDataMask, portmask); - if(retVal != RT_ERR_OK) - return retVal; - - - regAddr = RTL8367C_REG_PARA_LED_IO_EN3; - regDataMask = 0x3 << (group*2); - retVal = rtl8367c_getAsicRegBits(regAddr, regDataMask, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *portmask = (regData << 8) | *portmask; - - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_setAsicLedOperationMode | Set LED operation mode -@parm rtk_uint32 | mode | LED mode. 1:scan mode 1, 2:parallel mode, 3:mdx mode (serial mode) -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can turn on/off led serial mode and set signal to active high/low. - */ -ret_t rtl8367c_setAsicLedOperationMode(rtk_uint32 mode) -{ - ret_t retVal; - - /* Invalid input parameter */ - if( mode >= LEDOP_END) - return RT_ERR_INPUT; - - switch(mode) - { - case LEDOP_PARALLEL: - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_LED_SELECT_OFFSET, 0))!= RT_ERR_OK) - return retVal; - /*Disable serial CLK mode*/ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SCAN0_LED_IO_EN1,RTL8367C_LED_SERI_CLK_EN_OFFSET, 0))!= RT_ERR_OK) - return retVal; - /*Disable serial DATA mode*/ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SCAN0_LED_IO_EN1,RTL8367C_LED_SERI_DATA_EN_OFFSET, 0))!= RT_ERR_OK) - return retVal; - break; - case LEDOP_SERIAL: - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_LED_SELECT_OFFSET, 1))!= RT_ERR_OK) - return retVal; - /*Enable serial CLK mode*/ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SCAN0_LED_IO_EN1,RTL8367C_LED_SERI_CLK_EN_OFFSET, 1))!= RT_ERR_OK) - return retVal; - /*Enable serial DATA mode*/ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SCAN0_LED_IO_EN1,RTL8367C_LED_SERI_DATA_EN_OFFSET, 1))!= RT_ERR_OK) - return retVal; - break; - default: - return RT_ERR_INPUT; - break; - } - - return RT_ERR_OK; -} - - -/* -@func ret_t | rtl8367c_getAsicLedOperationMode | Get LED OP mode setup -@parm rtk_uint32*| mode | LED mode. 1:scan mode 1, 2:parallel mode, 3:mdx mode (serial mode) -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can get LED serial mode setup and get signal active high/low. - */ -ret_t rtl8367c_getAsicLedOperationMode(rtk_uint32 *mode) -{ - ret_t retVal; - rtk_uint32 regData; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_LED_SELECT_OFFSET, ®Data))!= RT_ERR_OK) - return retVal; - - if (regData == 1) - *mode = LEDOP_SERIAL; - else if (regData == 0) - *mode = LEDOP_PARALLEL; - else - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* -@func ret_t | rtl8367c_setAsicLedSerialModeConfig | Set LED serial mode -@parm rtk_uint32 | active | Active High or Low. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can turn on/off led serial mode and set signal to active high/low. - */ -ret_t rtl8367c_setAsicLedSerialModeConfig(rtk_uint32 active, rtk_uint32 serimode) -{ - ret_t retVal; - - /* Invalid input parameter */ - if( active >= LEDSERACT_MAX) - return RT_ERR_INPUT; - if( serimode >= LEDSER_MAX) - return RT_ERR_INPUT; - - /* Set Active High or Low */ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_SERI_LED_ACT_LOW_OFFSET, active)) != RT_ERR_OK) - return retVal; - - /*set to 8G mode (not 16G mode)*/ - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_MODE, RTL8367C_DLINK_TIME_OFFSET, serimode))!= RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - - -/* -@func ret_t | rtl8367c_getAsicLedSerialModeConfig | Get LED serial mode setup -@parm rtk_uint32*| active | Active High or Low. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can get LED serial mode setup and get signal active high/low. - */ -ret_t rtl8367c_getAsicLedSerialModeConfig(rtk_uint32 *active, rtk_uint32 *serimode) -{ - ret_t retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_SERI_LED_ACT_LOW_OFFSET, active))!= RT_ERR_OK) - return retVal; - - /*get to 8G mode (not 16G mode)*/ - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LED_MODE, RTL8367C_DLINK_TIME_OFFSET, serimode))!= RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* -@func ret_t | rtl8367c_setAsicLedOutputEnable | Set LED output enable -@parm rtk_uint32 | enabled | enable or disalbe. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can turn on/off LED output Enable - */ -ret_t rtl8367c_setAsicLedOutputEnable(rtk_uint32 enabled) -{ - ret_t retVal; - rtk_uint32 regdata; - - if (enabled == 1) - regdata = 0; - else - regdata = 1; - - /* Enable/Disable H/W IGMP/MLD */ - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_LED_IO_DISABLE_OFFSET, regdata); - - return retVal; -} - - -/* -@func ret_t | rtl8367c_getAsicLedOutputEnable | Get LED serial mode setup -@parm rtk_uint32*| active | Active High or Low. -@rvalue RT_ERR_OK | Success. -@rvalue RT_ERR_SMI | SMI access error. -@rvalue RT_ERR_INPUT | Invalid input value. -@comm - The API can get LED serial mode setup and get signal active high/low. - */ -ret_t rtl8367c_getAsicLedOutputEnable(rtk_uint32 *ptr_enabled) -{ - ret_t retVal; - rtk_uint32 regdata; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LED_SYS_CONFIG, RTL8367C_LED_IO_DISABLE_OFFSET, ®data); - if (retVal != RT_ERR_OK) - return retVal; - - if (regdata == 1) - *ptr_enabled = 0; - else - *ptr_enabled = 1; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicLedSerialOutput - * Description: - * Set serial LED output group and portmask. - * Input: - * output - Serial LED output group - * pmask - Serial LED output portmask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicLedSerialOutput(rtk_uint32 output, rtk_uint32 pmask) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SERIAL_LED_CTRL, RTL8367C_SERIAL_LED_GROUP_NUM_MASK, output); - if (retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SERIAL_LED_CTRL, RTL8367C_SERIAL_LED_PORT_EN_MASK, pmask); - if (retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicLedSerialOutput - * Description: - * Get serial LED output group and portmask. - * Input: - * None - * Output: - * pOutput - Serial LED output group - * pPmask - Serial LED output portmask - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicLedSerialOutput(rtk_uint32 *pOutput, rtk_uint32 *pPmask) -{ - ret_t retVal; - - if(pOutput == NULL) - return RT_ERR_NULL_POINTER; - - if(pPmask == NULL) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SERIAL_LED_CTRL, RTL8367C_SERIAL_LED_GROUP_NUM_MASK, pOutput); - if (retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SERIAL_LED_CTRL, RTL8367C_SERIAL_LED_PORT_EN_MASK, pPmask); - if (retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_lut.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_lut.c deleted file mode 100644 index 343a6f159c..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_lut.c +++ /dev/null @@ -1,1549 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : LUT related functions - * - */ - -#include - -#include - -static void _rtl8367c_fdbStUser2Smi( rtl8367c_luttb *pLutSt, rtk_uint16 *pFdbSmi) -{ - /* L3 lookup */ - if(pLutSt->l3lookup) - { - if(pLutSt->l3vidlookup) - { - pFdbSmi[0] = (pLutSt->sip & 0x0000FFFF); - pFdbSmi[1] = (pLutSt->sip & 0xFFFF0000) >> 16; - - pFdbSmi[2] = (pLutSt->dip & 0x0000FFFF); - pFdbSmi[3] = (pLutSt->dip & 0x0FFF0000) >> 16; - - pFdbSmi[3] |= (pLutSt->l3lookup & 0x0001) << 12; - pFdbSmi[3] |= (pLutSt->l3vidlookup & 0x0001) << 13; - pFdbSmi[3] |= ((pLutSt->mbr & 0x0300) >> 8) << 14; - - pFdbSmi[4] |= (pLutSt->mbr & 0x00FF); - pFdbSmi[4] |= (pLutSt->l3_vid & 0x00FF) << 8; - - pFdbSmi[5] |= ((pLutSt->l3_vid & 0x0F00) >> 8); - pFdbSmi[5] |= (pLutSt->nosalearn & 0x0001) << 5; - pFdbSmi[5] |= ((pLutSt->mbr & 0x0400) >> 10) << 7; - } - else - { - pFdbSmi[0] = (pLutSt->sip & 0x0000FFFF); - pFdbSmi[1] = (pLutSt->sip & 0xFFFF0000) >> 16; - - pFdbSmi[2] = (pLutSt->dip & 0x0000FFFF); - pFdbSmi[3] = (pLutSt->dip & 0x0FFF0000) >> 16; - - pFdbSmi[3] |= (pLutSt->l3lookup & 0x0001) << 12; - pFdbSmi[3] |= (pLutSt->l3vidlookup & 0x0001) << 13; - pFdbSmi[3] |= ((pLutSt->mbr & 0x0300) >> 8) << 14; - - pFdbSmi[4] |= (pLutSt->mbr & 0x00FF); - pFdbSmi[4] |= (pLutSt->igmpidx & 0x00FF) << 8; - - pFdbSmi[5] |= (pLutSt->igmp_asic & 0x0001); - pFdbSmi[5] |= (pLutSt->lut_pri & 0x0007) << 1; - pFdbSmi[5] |= (pLutSt->fwd_en & 0x0001) << 4; - pFdbSmi[5] |= (pLutSt->nosalearn & 0x0001) << 5; - pFdbSmi[5] |= ((pLutSt->mbr & 0x0400) >> 10) << 7; - } - } - else if(pLutSt->mac.octet[0] & 0x01) /*Multicast L2 Lookup*/ - { - pFdbSmi[0] |= pLutSt->mac.octet[5]; - pFdbSmi[0] |= pLutSt->mac.octet[4] << 8; - - pFdbSmi[1] |= pLutSt->mac.octet[3]; - pFdbSmi[1] |= pLutSt->mac.octet[2] << 8; - - pFdbSmi[2] |= pLutSt->mac.octet[1]; - pFdbSmi[2] |= pLutSt->mac.octet[0] << 8; - - pFdbSmi[3] |= pLutSt->cvid_fid; - pFdbSmi[3] |= (pLutSt->l3lookup & 0x0001) << 12; - pFdbSmi[3] |= (pLutSt->ivl_svl & 0x0001) << 13; - pFdbSmi[3] |= ((pLutSt->mbr & 0x0300) >> 8) << 14; - - pFdbSmi[4] |= (pLutSt->mbr & 0x00FF); - pFdbSmi[4] |= (pLutSt->igmpidx & 0x00FF) << 8; - - pFdbSmi[5] |= pLutSt->igmp_asic; - pFdbSmi[5] |= (pLutSt->lut_pri & 0x0007) << 1; - pFdbSmi[5] |= (pLutSt->fwd_en & 0x0001) << 4; - pFdbSmi[5] |= (pLutSt->nosalearn & 0x0001) << 5; - pFdbSmi[5] |= ((pLutSt->mbr & 0x0400) >> 10) << 7; - } - else /*Asic auto-learning*/ - { - pFdbSmi[0] |= pLutSt->mac.octet[5]; - pFdbSmi[0] |= pLutSt->mac.octet[4] << 8; - - pFdbSmi[1] |= pLutSt->mac.octet[3]; - pFdbSmi[1] |= pLutSt->mac.octet[2] << 8; - - pFdbSmi[2] |= pLutSt->mac.octet[1]; - pFdbSmi[2] |= pLutSt->mac.octet[0] << 8; - - pFdbSmi[3] |= pLutSt->cvid_fid; - pFdbSmi[3] |= (pLutSt->l3lookup & 0x0001) << 12; - pFdbSmi[3] |= (pLutSt->ivl_svl & 0x0001) << 13; - pFdbSmi[3] |= ((pLutSt->spa & 0x0008) >> 3) << 15; - - pFdbSmi[4] |= pLutSt->efid; - pFdbSmi[4] |= (pLutSt->fid & 0x000F) << 3; - pFdbSmi[4] |= (pLutSt->sa_en & 0x0001) << 7; - pFdbSmi[4] |= (pLutSt->spa & 0x0007) << 8; - pFdbSmi[4] |= (pLutSt->age & 0x0007) << 11; - pFdbSmi[4] |= (pLutSt->auth & 0x0001) << 14; - pFdbSmi[4] |= (pLutSt->sa_block & 0x0001) << 15; - - pFdbSmi[5] |= pLutSt->da_block; - pFdbSmi[5] |= (pLutSt->lut_pri & 0x0007) << 1; - pFdbSmi[5] |= (pLutSt->fwd_en & 0x0001) << 4; - pFdbSmi[5] |= (pLutSt->nosalearn & 0x0001) << 5; - } -} - - -static void _rtl8367c_fdbStSmi2User( rtl8367c_luttb *pLutSt, rtk_uint16 *pFdbSmi) -{ - /*L3 lookup*/ - if(pFdbSmi[3] & 0x1000) - { - if(pFdbSmi[3] & 0x2000) - { - pLutSt->sip = pFdbSmi[0] | (pFdbSmi[1] << 16); - pLutSt->dip = pFdbSmi[2] | ((pFdbSmi[3] & 0x0FFF) << 16); - - pLutSt->mbr = (pFdbSmi[4] & 0x00FF) | (((pFdbSmi[3] & 0xC000) >> 14) << 8) | (((pFdbSmi[5] & 0x0080) >> 7) << 10); - pLutSt->l3_vid = ((pFdbSmi[4] & 0xFF00) >> 8) | (pFdbSmi[5] & 0x000F); - - pLutSt->l3lookup = (pFdbSmi[3] & 0x1000) >> 12; - pLutSt->l3vidlookup = (pFdbSmi[3] & 0x2000) >> 13; - pLutSt->nosalearn = (pFdbSmi[5] & 0x0020) >> 5; - } - else - { - pLutSt->sip = pFdbSmi[0] | (pFdbSmi[1] << 16); - pLutSt->dip = pFdbSmi[2] | ((pFdbSmi[3] & 0x0FFF) << 16); - - pLutSt->lut_pri = (pFdbSmi[5] & 0x000E) >> 1; - pLutSt->fwd_en = (pFdbSmi[5] & 0x0010) >> 4; - - pLutSt->mbr = (pFdbSmi[4] & 0x00FF) | (((pFdbSmi[3] & 0xC000) >> 14) << 8) | (((pFdbSmi[5] & 0x0080) >> 7) << 10); - pLutSt->igmpidx = (pFdbSmi[4] & 0xFF00) >> 8; - - pLutSt->igmp_asic = (pFdbSmi[5] & 0x0001); - pLutSt->l3lookup = (pFdbSmi[3] & 0x1000) >> 12; - pLutSt->nosalearn = (pFdbSmi[5] & 0x0020) >> 5; - } - } - else if(pFdbSmi[2] & 0x0100) /*Multicast L2 Lookup*/ - { - pLutSt->mac.octet[0] = (pFdbSmi[2] & 0xFF00) >> 8; - pLutSt->mac.octet[1] = (pFdbSmi[2] & 0x00FF); - pLutSt->mac.octet[2] = (pFdbSmi[1] & 0xFF00) >> 8; - pLutSt->mac.octet[3] = (pFdbSmi[1] & 0x00FF); - pLutSt->mac.octet[4] = (pFdbSmi[0] & 0xFF00) >> 8; - pLutSt->mac.octet[5] = (pFdbSmi[0] & 0x00FF); - - pLutSt->cvid_fid = pFdbSmi[3] & 0x0FFF; - pLutSt->lut_pri = (pFdbSmi[5] & 0x000E) >> 1; - pLutSt->fwd_en = (pFdbSmi[5] & 0x0010) >> 4; - - pLutSt->mbr = (pFdbSmi[4] & 0x00FF) | (((pFdbSmi[3] & 0xC000) >> 14) << 8) | (((pFdbSmi[5] & 0x0080) >> 7) << 10); - pLutSt->igmpidx = (pFdbSmi[4] & 0xFF00) >> 8; - - pLutSt->igmp_asic = (pFdbSmi[5] & 0x0001); - pLutSt->l3lookup = (pFdbSmi[3] & 0x1000) >> 12; - pLutSt->ivl_svl = (pFdbSmi[3] & 0x2000) >> 13; - pLutSt->nosalearn = (pFdbSmi[5] & 0x0020) >> 5; - } - else /*Asic auto-learning*/ - { - pLutSt->mac.octet[0] = (pFdbSmi[2] & 0xFF00) >> 8; - pLutSt->mac.octet[1] = (pFdbSmi[2] & 0x00FF); - pLutSt->mac.octet[2] = (pFdbSmi[1] & 0xFF00) >> 8; - pLutSt->mac.octet[3] = (pFdbSmi[1] & 0x00FF); - pLutSt->mac.octet[4] = (pFdbSmi[0] & 0xFF00) >> 8; - pLutSt->mac.octet[5] = (pFdbSmi[0] & 0x00FF); - - pLutSt->cvid_fid = pFdbSmi[3] & 0x0FFF; - pLutSt->lut_pri = (pFdbSmi[5] & 0x000E) >> 1; - pLutSt->fwd_en = (pFdbSmi[5] & 0x0010) >> 4; - - pLutSt->sa_en = (pFdbSmi[4] & 0x0080) >> 7; - pLutSt->auth = (pFdbSmi[4] & 0x4000) >> 14; - pLutSt->spa = ((pFdbSmi[4] & 0x0700) >> 8) | (((pFdbSmi[3] & 0x8000) >> 15) << 3); - pLutSt->age = (pFdbSmi[4] & 0x3800) >> 11; - pLutSt->fid = (pFdbSmi[4] & 0x0078) >> 3; - pLutSt->efid = (pFdbSmi[4] & 0x0007); - pLutSt->sa_block = (pFdbSmi[4] & 0x8000) >> 15; - - pLutSt->da_block = (pFdbSmi[5] & 0x0001); - pLutSt->l3lookup = (pFdbSmi[3] & 0x1000) >> 12; - pLutSt->ivl_svl = (pFdbSmi[3] & 0x2000) >> 13; - pLutSt->nosalearn = (pFdbSmi[3] & 0x0020) >> 5; - } -} - -/* Function Name: - * rtl8367c_setAsicLutIpMulticastLookup - * Description: - * Set Lut IP multicast lookup function - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicLutIpMulticastLookup(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LUT_IPMC_HASH_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicLutIpMulticastLookup - * Description: - * Get Lut IP multicast lookup function - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutIpMulticastLookup(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LUT_IPMC_HASH_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicLutIpMulticastLookup - * Description: - * Set Lut IP multicast + VID lookup function - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicLutIpMulticastVidLookup(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG2, RTL8367C_LUT_IPMC_VID_HASH_OFFSET, enabled); -} - -/* Function Name: - * rtl8367c_getAsicLutIpMulticastVidLookup - * Description: - * Get Lut IP multicast lookup function - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutIpMulticastVidLookup(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_LUT_CFG2, RTL8367C_LUT_IPMC_VID_HASH_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicLutIpLookupMethod - * Description: - * Set Lut IP lookup hash with DIP or {DIP,SIP} pair - * Input: - * type - 1: When DIP can be found in IPMC_GROUP_TABLE, use DIP+SIP Hash, otherwise, use DIP+(SIP=0.0.0.0) Hash. - * 0: When DIP can be found in IPMC_GROUP_TABLE, use DIP+(SIP=0.0.0.0) Hash, otherwise use DIP+SIP Hash. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicLutIpLookupMethod(rtk_uint32 type) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LUT_IPMC_LOOKUP_OP_OFFSET, type); -} -/* Function Name: - * rtl8367c_getAsicLutIpLookupMethod - * Description: - * Get Lut IP lookup hash with DIP or {DIP,SIP} pair - * Input: - * pType - 1: When DIP can be found in IPMC_GROUP_TABLE, use DIP+SIP Hash, otherwise, use DIP+(SIP=0.0.0.0) Hash. - * 0: When DIP can be found in IPMC_GROUP_TABLE, use DIP+(SIP=0.0.0.0) Hash, otherwise use DIP+SIP Hash. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutIpLookupMethod(rtk_uint32* pType) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LUT_IPMC_LOOKUP_OP_OFFSET, pType); -} -/* Function Name: - * rtl8367c_setAsicLutAgeTimerSpeed - * Description: - * Set LUT agging out speed - * Input: - * timer - Agging out timer 0:Has been aged out - * speed - Agging out speed 0-fastest 3-slowest - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicLutAgeTimerSpeed(rtk_uint32 timer, rtk_uint32 speed) -{ - if(timer>RTL8367C_LUT_AGETIMERMAX) - return RT_ERR_OUT_OF_RANGE; - - if(speed >RTL8367C_LUT_AGESPEEDMAX) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_LUT_CFG, RTL8367C_AGE_TIMER_MASK | RTL8367C_AGE_SPEED_MASK, (timer << RTL8367C_AGE_TIMER_OFFSET) | (speed << RTL8367C_AGE_SPEED_OFFSET)); -} -/* Function Name: - * rtl8367c_getAsicLutAgeTimerSpeed - * Description: - * Get LUT agging out speed - * Input: - * pTimer - Agging out timer 0:Has been aged out - * pSpeed - Agging out speed 0-fastest 3-slowest - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicLutAgeTimerSpeed(rtk_uint32* pTimer, rtk_uint32* pSpeed) -{ - rtk_uint32 regData; - ret_t retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_LUT_CFG, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pTimer = (regData & RTL8367C_AGE_TIMER_MASK) >> RTL8367C_AGE_TIMER_OFFSET; - - *pSpeed = (regData & RTL8367C_AGE_SPEED_MASK) >> RTL8367C_AGE_SPEED_OFFSET; - - return RT_ERR_OK; - -} -/* Function Name: - * rtl8367c_setAsicLutCamTbUsage - * Description: - * Configure Lut CAM table usage - * Input: - * enabled - L2 CAM table usage 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicLutCamTbUsage(rtk_uint32 enabled) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_BCAM_DISABLE_OFFSET, enabled ? 0 : 1); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicLutCamTbUsage - * Description: - * Get Lut CAM table usage - * Input: - * pEnabled - L2 CAM table usage 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutCamTbUsage(rtk_uint32* pEnabled) -{ - ret_t retVal; - rtk_uint32 regData; - - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_BCAM_DISABLE_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - - *pEnabled = regData ? 0 : 1; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicLutLearnLimitNo - * Description: - * Set per-Port auto learning limit number - * Input: - * port - Physical port number (0~7) - * number - ASIC auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number - * Note: - * None - */ - /*ÐÞ¸Ä: RTL8367C_PORTIDMAX, RTL8367C_LUT_LEARNLIMITMAX, RTL8367C_LUT_PORT_LEARN_LIMITNO_REG*/ -ret_t rtl8367c_setAsicLutLearnLimitNo(rtk_uint32 port, rtk_uint32 number) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(number > RTL8367C_LUT_LEARNLIMITMAX) - return RT_ERR_LIMITED_L2ENTRY_NUM; - - if(port < 8) - return rtl8367c_setAsicReg(RTL8367C_LUT_PORT_LEARN_LIMITNO_REG(port), number); - else - return rtl8367c_setAsicReg(RTL8367C_REG_LUT_PORT8_LEARN_LIMITNO+port-8, number); - -} -/* Function Name: - * rtl8367c_getAsicLutLearnLimitNo - * Description: - * Get per-Port auto learning limit number - * Input: - * port - Physical port number (0~7) - * pNumber - ASIC auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ - /*ÐÞ¸Ä: RTL8367C_PORTIDMAX, RTL8367C_LUT_PORT_LEARN_LIMITNO_REG*/ -ret_t rtl8367c_getAsicLutLearnLimitNo(rtk_uint32 port, rtk_uint32* pNumber) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicReg(RTL8367C_LUT_PORT_LEARN_LIMITNO_REG(port), pNumber); - else - return rtl8367c_getAsicReg(RTL8367C_REG_LUT_PORT8_LEARN_LIMITNO+port-8, pNumber); -} - -/* Function Name: - * rtl8367c_setAsicSystemLutLearnLimitNo - * Description: - * Set system auto learning limit number - * Input: - * number - ASIC auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number - * Note: - * None - */ - /*ÐÞ¸Ä: RTL8367C_LUT_LEARNLIMITMAX*/ -ret_t rtl8367c_setAsicSystemLutLearnLimitNo(rtk_uint32 number) -{ - if(number > RTL8367C_LUT_LEARNLIMITMAX) - return RT_ERR_LIMITED_L2ENTRY_NUM; - - return rtl8367c_setAsicReg(RTL8367C_REG_LUT_SYS_LEARN_LIMITNO, number); -} - -/* Function Name: - * rtl8367c_getAsicSystemLutLearnLimitNo - * Description: - * Get system auto learning limit number - * Input: - * port - Physical port number (0~7) - * pNumber - ASIC auto learning entries limit number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicSystemLutLearnLimitNo(rtk_uint32 *pNumber) -{ - if(NULL == pNumber) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicReg(RTL8367C_REG_LUT_SYS_LEARN_LIMITNO, pNumber); -} - -/* Function Name: - * rtl8367c_setAsicLutLearnOverAct - * Description: - * Set auto learn over limit number action - * Input: - * action - Learn over action 0:normal, 1:drop 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid learn over action - * Note: - * None - */ -ret_t rtl8367c_setAsicLutLearnOverAct(rtk_uint32 action) -{ - if(action >= LRNOVERACT_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_SECURITY_CTRL, RTL8367C_LUT_LEARN_OVER_ACT_MASK, action); -} -/* Function Name: - * rtl8367c_getAsicLutLearnOverAct - * Description: - * Get auto learn over limit number action - * Input: - * pAction - Learn over action 0:normal, 1:drop 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutLearnOverAct(rtk_uint32* pAction) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_SECURITY_CTRL, RTL8367C_LUT_LEARN_OVER_ACT_MASK, pAction); -} - -/* Function Name: - * rtl8367c_setAsicSystemLutLearnOverAct - * Description: - * Set system auto learn over limit number action - * Input: - * action - Learn over action 0:normal, 1:drop, 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid learn over action - * Note: - * None - */ -ret_t rtl8367c_setAsicSystemLutLearnOverAct(rtk_uint32 action) -{ - if(action >= LRNOVERACT_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL, RTL8367C_LUT_SYSTEM_LEARN_OVER_ACT_MASK, action); -} - -/* Function Name: - * rtl8367c_getAsicSystemLutLearnOverAct - * Description: - * Get system auto learn over limit number action - * Input: - * pAction - Learn over action 0:normal, 1:drop 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSystemLutLearnOverAct(rtk_uint32 *pAction) -{ - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL, RTL8367C_LUT_SYSTEM_LEARN_OVER_ACT_MASK, pAction); -} - -/* Function Name: - * rtl8367c_setAsicSystemLutLearnPortMask - * Description: - * Set system auto learn limit port mask - * Input: - * portmask - port mask of system learning limit - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Error port mask - * Note: - * None - */ - /*ÐÞ¸Ä: RTL8367C_LUT_SYSTEM_LEARN_PMASK_MASK*/ -ret_t rtl8367c_setAsicSystemLutLearnPortMask(rtk_uint32 portmask) -{ - ret_t retVal; - - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL, RTL8367C_LUT_SYSTEM_LEARN_PMASK_MASK, portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL, RTL8367C_LUT_SYSTEM_LEARN_PMASK1_MASK, (portmask>>8) & 0x7); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtl8367c_getAsicSystemLutLearnPortMask - * Description: - * Get system auto learn limit port mask - * Input: - * None - * Output: - * pPortmask - port mask of system learning limit - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - NULL pointer - * Note: - * None - */ - /*ÐÞ¸Ä: RTL8367C_LUT_SYSTEM_LEARN_PMASK_MASK*/ -ret_t rtl8367c_getAsicSystemLutLearnPortMask(rtk_uint32 *pPortmask) -{ - rtk_uint32 tmpmask; - ret_t retVal; - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL, RTL8367C_LUT_SYSTEM_LEARN_PMASK_MASK, &tmpmask); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask = tmpmask & 0xff; - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_LUT_LRN_SYS_LMT_CTRL, RTL8367C_LUT_SYSTEM_LEARN_PMASK1_MASK, &tmpmask); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask |= (tmpmask & 0x7) << 8; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicL2LookupTb - * Description: - * Set filtering database entry - * Input: - * pL2Table - L2 table entry writing to 8K+64 filtering database - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicL2LookupTb(rtl8367c_luttb *pL2Table) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smil2Table[RTL8367C_LUT_TABLE_SIZE]; - rtk_uint32 tblCmd; - rtk_uint32 busyCounter; - - memset(smil2Table, 0x00, sizeof(rtk_uint16) * RTL8367C_LUT_TABLE_SIZE); - _rtl8367c_fdbStUser2Smi(pL2Table, smil2Table); - - if(pL2Table->wait_time == 0) - busyCounter = RTL8367C_LUT_BUSY_CHECK_NO; - else - busyCounter = pL2Table->wait_time; - - while(busyCounter) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->lookup_busy = regData; - if(!regData) - break; - - busyCounter --; - if(busyCounter == 0) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - - accessPtr = smil2Table; - regData = *accessPtr; - for(i = 0; i < RTL8367C_LUT_ENTRY_SIZE; i++) - { - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_WRDATA_BASE + i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - accessPtr ++; - regData = *accessPtr; - - } - - tblCmd = (RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_WRITE,TB_TARGET_L2)) & (RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK); - /* Write Command */ - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_CTRL_REG, tblCmd); - if(retVal != RT_ERR_OK) - return retVal; - - if(pL2Table->wait_time == 0) - busyCounter = RTL8367C_LUT_BUSY_CHECK_NO; - else - busyCounter = pL2Table->wait_time; - - while(busyCounter) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->lookup_busy = regData; - if(!regData) - break; - - busyCounter --; - if(busyCounter == 0) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - - /*Read access status*/ - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_HIT_STATUS_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->lookup_hit = regData; - if(!pL2Table->lookup_hit) - return RT_ERR_FAILED; - - /*Read access address*/ - /* - retVal = rtl8367c_getAsicRegBits(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_TYPE_MASK | RTL8367C_TABLE_LUT_ADDR_ADDRESS_MASK,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->address = regData;*/ - - retVal = rtl8367c_getAsicReg(RTL8367C_TABLE_ACCESS_STATUS_REG, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->address = (regData & 0x7ff) | ((regData & 0x4000) >> 3) | ((regData & 0x800) << 1); - pL2Table->lookup_busy = 0; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicL2LookupTb - * Description: - * Get filtering database entry - * Input: - * pL2Table - L2 table entry writing to 2K+64 filtering database - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_BUSYWAIT_TIMEOUT - LUT is busy at retrieving - * Note: - * None - */ -ret_t rtl8367c_getAsicL2LookupTb(rtk_uint32 method, rtl8367c_luttb *pL2Table) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16* accessPtr; - rtk_uint32 i; - rtk_uint16 smil2Table[RTL8367C_LUT_TABLE_SIZE]; - rtk_uint32 busyCounter; - rtk_uint32 tblCmd; - - if(pL2Table->wait_time == 0) - busyCounter = RTL8367C_LUT_BUSY_CHECK_NO; - else - busyCounter = pL2Table->wait_time; - - while(busyCounter) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->lookup_busy = regData; - if(!pL2Table->lookup_busy) - break; - - busyCounter --; - if(busyCounter == 0) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - - - tblCmd = (method << RTL8367C_ACCESS_METHOD_OFFSET) & RTL8367C_ACCESS_METHOD_MASK; - - switch(method) - { - case LUTREADMETHOD_ADDRESS: - case LUTREADMETHOD_NEXT_ADDRESS: - case LUTREADMETHOD_NEXT_L2UC: - case LUTREADMETHOD_NEXT_L2MC: - case LUTREADMETHOD_NEXT_L3MC: - case LUTREADMETHOD_NEXT_L2L3MC: - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_ADDR_REG, pL2Table->address); - if(retVal != RT_ERR_OK) - return retVal; - break; - case LUTREADMETHOD_MAC: - memset(smil2Table, 0x00, sizeof(rtk_uint16) * RTL8367C_LUT_TABLE_SIZE); - _rtl8367c_fdbStUser2Smi(pL2Table, smil2Table); - - accessPtr = smil2Table; - regData = *accessPtr; - for(i=0; iaddress); - if(retVal != RT_ERR_OK) - return retVal; - - tblCmd = tblCmd | ((pL2Table->spa << RTL8367C_TABLE_ACCESS_CTRL_SPA_OFFSET) & RTL8367C_TABLE_ACCESS_CTRL_SPA_MASK); - - break; - default: - return RT_ERR_INPUT; - } - - tblCmd = tblCmd | ((RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_READ,TB_TARGET_L2)) & (RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK)); - /* Read Command */ - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_CTRL_REG, tblCmd); - if(retVal != RT_ERR_OK) - return retVal; - - if(pL2Table->wait_time == 0) - busyCounter = RTL8367C_LUT_BUSY_CHECK_NO; - else - busyCounter = pL2Table->wait_time; - - while(busyCounter) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->lookup_busy = regData; - if(!pL2Table->lookup_busy) - break; - - busyCounter --; - if(busyCounter == 0) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_HIT_STATUS_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - pL2Table->lookup_hit = regData; - if(!pL2Table->lookup_hit) - return RT_ERR_L2_ENTRY_NOTFOUND; - - /*Read access address*/ - //retVal = rtl8367c_getAsicRegBits(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_TYPE_MASK | RTL8367C_TABLE_LUT_ADDR_ADDRESS_MASK,®Data); - retVal = rtl8367c_getAsicReg(RTL8367C_TABLE_ACCESS_STATUS_REG, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pL2Table->address = (regData & 0x7ff) | ((regData & 0x4000) >> 3) | ((regData & 0x800) << 1); - - /*read L2 entry */ - memset(smil2Table, 0x00, sizeof(rtk_uint16) * RTL8367C_LUT_TABLE_SIZE); - - accessPtr = smil2Table; - - for(i = 0; i < RTL8367C_LUT_ENTRY_SIZE; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_TABLE_ACCESS_RDDATA_BASE + i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = regData; - - accessPtr ++; - } - - _rtl8367c_fdbStSmi2User(pL2Table, smil2Table); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicLutLearnNo - * Description: - * Get per-Port auto learning number - * Input: - * port - Physical port number (0~7) - * pNumber - ASIC auto learning entries number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ - /*ÐÞ¸ÄRTL8367C_PORTIDMAX, RTL8367C_REG_L2_LRN_CNT_REG, port10 reg is not contnious, wait for updating of base.h*/ -ret_t rtl8367c_getAsicLutLearnNo(rtk_uint32 port, rtk_uint32* pNumber) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 10) - { - retVal = rtl8367c_getAsicReg(RTL8367C_REG_L2_LRN_CNT_REG(port), pNumber); - if (retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicReg(RTL8367C_REG_L2_LRN_CNT_CTRL10, pNumber); - if (retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicLutFlushAll - * Description: - * Flush all entries in LUT. Includes static & dynamic entries - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicLutFlushAll(void) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_L2_FLUSH_CTRL3, RTL8367C_L2_FLUSH_CTRL3_OFFSET, 1); -} - -/* Function Name: - * rtl8367c_getAsicLutFlushAllStatus - * Description: - * Get Flush all status, 1:Busy, 0 normal - * Input: - * None - * Output: - * pBusyStatus - Busy state - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicLutFlushAllStatus(rtk_uint32 *pBusyStatus) -{ - if(NULL == pBusyStatus) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_L2_FLUSH_CTRL3, RTL8367C_L2_FLUSH_CTRL3_OFFSET, pBusyStatus); -} - -/* Function Name: - * rtl8367c_setAsicLutForceFlush - * Description: - * Set per port force flush setting - * Input: - * portmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ - /*port8~port10µÄÉèÖÃÔÚÁíÍâÒ»¸öregister, wait for updating of base.h, reg.h*/ -ret_t rtl8367c_setAsicLutForceFlush(rtk_uint32 portmask) -{ - ret_t retVal; - - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_FORCE_FLUSH_REG, RTL8367C_FORCE_FLUSH_PORTMASK_MASK, portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_FORCE_FLUSH1, RTL8367C_PORTMASK1_MASK, (portmask >> 8) & 0x7); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicLutForceFlushStatus - * Description: - * Get per port force flush status - * Input: - * pPortmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ - /*port8~port10µÄÉèÖÃÔÚÁíÍâÒ»¸öregister, wait for updating of base.h, reg.h*/ -ret_t rtl8367c_getAsicLutForceFlushStatus(rtk_uint32 *pPortmask) -{ - rtk_uint32 tmpMask; - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_FORCE_FLUSH_REG, RTL8367C_BUSY_STATUS_MASK,&tmpMask); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask = tmpMask & 0xff; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_FORCE_FLUSH1, RTL8367C_BUSY_STATUS1_MASK,&tmpMask); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask |= (tmpMask & 7) << 8; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicLutFlushMode - * Description: - * Set user force L2 pLutSt table flush mode - * Input: - * mode - 0:Port based 1: Port + VLAN based 2:Port + FID/MSTI based - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Actions not allowed by the function - * Note: - * None - */ -ret_t rtl8367c_setAsicLutFlushMode(rtk_uint32 mode) -{ - if( mode >= FLUSHMDOE_END ) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_L2_FLUSH_CTRL2, RTL8367C_LUT_FLUSH_MODE_MASK, mode); -} -/* Function Name: - * rtl8367c_getAsicLutFlushMode - * Description: - * Get user force L2 pLutSt table flush mode - * Input: - * pMode - 0:Port based 1: Port + VLAN based 2:Port + FID/MSTI based - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutFlushMode(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_L2_FLUSH_CTRL2, RTL8367C_LUT_FLUSH_MODE_MASK, pMode); -} -/* Function Name: - * rtl8367c_setAsicLutFlushType - * Description: - * Get L2 LUT flush type - * Input: - * type - 0: dynamice unicast; 1: both dynamic and static unicast entry - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicLutFlushType(rtk_uint32 type) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_L2_FLUSH_CTRL2, RTL8367C_LUT_FLUSH_TYPE_OFFSET,type); -} -/* Function Name: - * rtl8367c_getAsicLutFlushType - * Description: - * Set L2 LUT flush type - * Input: - * pType - 0: dynamice unicast; 1: both dynamic and static unicast entry - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutFlushType(rtk_uint32* pType) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_L2_FLUSH_CTRL2, RTL8367C_LUT_FLUSH_TYPE_OFFSET,pType); -} - - -/* Function Name: - * rtl8367c_setAsicLutFlushVid - * Description: - * Set VID of Port + VID pLutSt flush mode - * Input: - * vid - Vid (0~4095) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VID parameter (0~4095) - * Note: - * None - */ -ret_t rtl8367c_setAsicLutFlushVid(rtk_uint32 vid) -{ - if( vid > RTL8367C_VIDMAX ) - return RT_ERR_VLAN_VID; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_L2_FLUSH_CTRL1, RTL8367C_LUT_FLUSH_VID_MASK, vid); -} -/* Function Name: - * rtl8367c_getAsicLutFlushVid - * Description: - * Get VID of Port + VID pLutSt flush mode - * Input: - * pVid - Vid (0~4095) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutFlushVid(rtk_uint32* pVid) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_L2_FLUSH_CTRL1, RTL8367C_LUT_FLUSH_VID_MASK, pVid); -} -/* Function Name: - * rtl8367c_setAsicPortFlusdFid - * Description: - * Set FID of Port + FID pLutSt flush mode - * Input: - * fid - FID/MSTI for force flush - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_FID - Invalid FID (0~15) - * Note: - * None - */ -ret_t rtl8367c_setAsicLutFlushFid(rtk_uint32 fid) -{ - if( fid > RTL8367C_FIDMAX ) - return RT_ERR_L2_FID; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_L2_FLUSH_CTRL1, RTL8367C_LUT_FLUSH_FID_MASK, fid); -} -/* Function Name: - * rtl8367c_getAsicLutFlushFid - * Description: - * Get FID of Port + FID pLutSt flush mode - * Input: - * pFid - FID/MSTI for force flush - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLutFlushFid(rtk_uint32* pFid) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_L2_FLUSH_CTRL1, RTL8367C_LUT_FLUSH_FID_MASK, pFid); -} -/* Function Name: - * rtl8367c_setAsicLutDisableAging - * Description: - * Set L2 LUT aging per port setting - * Input: - * port - Physical port number (0~7) - * disabled - 0: enable aging; 1: disabling aging - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ - /*ÐÞ¸ÄRTL8367C_PORTIDMAX*/ -ret_t rtl8367c_setAsicLutDisableAging(rtk_uint32 port, rtk_uint32 disabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_LUT_AGEOUT_CTRL_REG, port, disabled); -} -/* Function Name: - * rtl8367c_getAsicLutDisableAging - * Description: - * Get L2 LUT aging per port setting - * Input: - * port - Physical port number (0~7) - * pDisabled - 0: enable aging; 1: disabling aging - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ - /*ÐÞ¸ÄRTL8367C_PORTIDMAX*/ -ret_t rtl8367c_getAsicLutDisableAging(rtk_uint32 port, rtk_uint32 *pDisabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_LUT_AGEOUT_CTRL_REG, port, pDisabled); -} - -/* Function Name: - * rtl8367c_setAsicLutIPMCGroup - * Description: - * Set IPMC Group Table - * Input: - * index - the entry index in table (0 ~ 63) - * group_addr - the multicast group address (224.0.0.0 ~ 239.255.255.255) - * vid - VLAN ID - * pmask - portmask - * valid - valid bit - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicLutIPMCGroup(rtk_uint32 index, ipaddr_t group_addr, rtk_uint32 vid, rtk_uint32 pmask, rtk_uint32 valid) -{ - rtk_uint32 regAddr, regData, bitoffset; - ipaddr_t ipData; - ret_t retVal; - - if(index > RTL8367C_LUT_IPMCGRP_TABLE_MAX) - return RT_ERR_INPUT; - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - ipData = group_addr; - - if( (ipData & 0xF0000000) != 0xE0000000) /* not in 224.0.0.0 ~ 239.255.255.255 */ - return RT_ERR_INPUT; - - /* Group Address */ - regAddr = RTL8367C_REG_IPMC_GROUP_ENTRY0_H + (index * 2); - regData = ((ipData & 0x0FFFFFFF) >> 16); - - if( (retVal = rtl8367c_setAsicReg(regAddr, regData)) != RT_ERR_OK) - return retVal; - - regAddr++; - regData = (ipData & 0x0000FFFF); - - if( (retVal = rtl8367c_setAsicReg(regAddr, regData)) != RT_ERR_OK) - return retVal; - - /* VID */ - regAddr = RTL8367C_REG_IPMC_GROUP_VID_00 + index; - regData = vid; - - if( (retVal = rtl8367c_setAsicReg(regAddr, regData)) != RT_ERR_OK) - return retVal; - - /* portmask */ - regAddr = RTL8367C_REG_IPMC_GROUP_PMSK_00 + index; - regData = pmask; - - if( (retVal = rtl8367c_setAsicReg(regAddr, regData)) != RT_ERR_OK) - return retVal; - - /* valid */ - regAddr = RTL8367C_REG_IPMC_GROUP_VALID_15_0 + (index / 16); - bitoffset = index % 16; - if( (retVal = rtl8367c_setAsicRegBit(regAddr, bitoffset, valid)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicLutIPMCGroup - * Description: - * Set IPMC Group Table - * Input: - * index - the entry index in table (0 ~ 63) - * Output: - * pGroup_addr - the multicast group address (224.0.0.0 ~ 239.255.255.255) - * pVid - VLAN ID - * pPmask - portmask - * pValid - Valid bit - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid parameter - * Note: - * None - */ -ret_t rtl8367c_getAsicLutIPMCGroup(rtk_uint32 index, ipaddr_t *pGroup_addr, rtk_uint32 *pVid, rtk_uint32 *pPmask, rtk_uint32 *pValid) -{ - rtk_uint32 regAddr, regData, bitoffset; - ipaddr_t ipData; - ret_t retVal; - - if(index > RTL8367C_LUT_IPMCGRP_TABLE_MAX) - return RT_ERR_INPUT; - - if (NULL == pGroup_addr) - return RT_ERR_NULL_POINTER; - - if (NULL == pVid) - return RT_ERR_NULL_POINTER; - - if (NULL == pPmask) - return RT_ERR_NULL_POINTER; - - /* Group address */ - regAddr = RTL8367C_REG_IPMC_GROUP_ENTRY0_H + (index * 2); - if( (retVal = rtl8367c_getAsicReg(regAddr, ®Data)) != RT_ERR_OK) - return retVal; - - *pGroup_addr = (((regData & 0x00000FFF) << 16) | 0xE0000000); - - regAddr++; - if( (retVal = rtl8367c_getAsicReg(regAddr, ®Data)) != RT_ERR_OK) - return retVal; - - ipData = (*pGroup_addr | (regData & 0x0000FFFF)); - *pGroup_addr = ipData; - - /* VID */ - regAddr = RTL8367C_REG_IPMC_GROUP_VID_00 + index; - if( (retVal = rtl8367c_getAsicReg(regAddr, ®Data)) != RT_ERR_OK) - return retVal; - - *pVid = regData; - - /* portmask */ - regAddr = RTL8367C_REG_IPMC_GROUP_PMSK_00 + index; - if( (retVal = rtl8367c_getAsicReg(regAddr, ®Data)) != RT_ERR_OK) - return retVal; - - *pPmask = regData; - - /* valid */ - regAddr = RTL8367C_REG_IPMC_GROUP_VALID_15_0 + (index / 16); - bitoffset = index % 16; - if( (retVal = rtl8367c_getAsicRegBit(regAddr, bitoffset, ®Data)) != RT_ERR_OK) - return retVal; - - *pValid = regData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicLutLinkDownForceAging - * Description: - * Set LUT link down aging setting. - * Input: - * enable - link down aging setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicLutLinkDownForceAging(rtk_uint32 enable) -{ - if(enable > 1) - return RT_ERR_ENABLE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LINKDOWN_AGEOUT_OFFSET, enable ? 0 : 1); -} - -/* Function Name: - * rtl8367c_getAsicLutLinkDownForceAging - * Description: - * Get LUT link down aging setting. - * Input: - * pEnable - link down aging setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid parameter - * Note: - * None - */ -ret_t rtl8367c_getAsicLutLinkDownForceAging(rtk_uint32 *pEnable) -{ - rtk_uint32 value; - ret_t retVal; - - if ((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_LUT_CFG, RTL8367C_LINKDOWN_AGEOUT_OFFSET, &value)) != RT_ERR_OK) - return retVal; - - *pEnable = value ? 0 : 1; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicLutIpmcFwdRouterPort - * Description: - * Set IPMC packet forward to rounter port also or not - * Input: - * enable - 1: Inlcude router port, 0, exclude router port - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE Invalid parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicLutIpmcFwdRouterPort(rtk_uint32 enable) -{ - if(enable > 1) - return RT_ERR_ENABLE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_LUT_CFG2, RTL8367C_LUT_IPMC_FWD_RPORT_OFFSET, enable); -} - -/* Function Name: - * rtl8367c_getAsicLutIpmcFwdRouterPort - * Description: - * Get IPMC packet forward to rounter port also or not - * Input: - * None - * Output: - * pEnable - 1: Inlcude router port, 0, exclude router port - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicLutIpmcFwdRouterPort(rtk_uint32 *pEnable) -{ - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_LUT_CFG2, RTL8367C_LUT_IPMC_FWD_RPORT_OFFSET, pEnable); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_meter.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_meter.c deleted file mode 100644 index 5412591a82..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_meter.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Shared meter related functions - * - */ -#include -/* Function Name: - * rtl8367c_setAsicShareMeter - * Description: - * Set meter configuration - * Input: - * index - hared meter index (0-31) - * rate - 17-bits rate of share meter, unit is 8Kpbs - * ifg - Including IFG in rate calculation, 1:include 0:exclude - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_setAsicShareMeter(rtk_uint32 index, rtk_uint32 rate, rtk_uint32 ifg) -{ - ret_t retVal; - - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - { - /*19-bits Rate*/ - retVal = rtl8367c_setAsicReg(RTL8367C_METER_RATE_REG(index), rate&0xFFFF); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_METER_RATE_REG(index) + 1, (rate &0x70000) >> 16); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_METER_IFG_CTRL_REG(index), RTL8367C_METER_IFG_OFFSET(index), ifg); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - /*19-bits Rate*/ - retVal = rtl8367c_setAsicReg(RTL8367C_REG_METER32_RATE_CTRL0 + ((index-32) << 1), rate&0xFFFF); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_REG_METER32_RATE_CTRL0 + ((index-32) << 1) + 1, (rate &0x70000) >> 16); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_METER_IFG_CTRL2 + ((index-32) >> 4), RTL8367C_METER_IFG_OFFSET(index), ifg); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicShareMeter - * Description: - * Get meter configuration - * Input: - * index - hared meter index (0-31) - * pRate - 17-bits rate of share meter, unit is 8Kpbs - * pIfg - Including IFG in rate calculation, 1:include 0:exclude - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_getAsicShareMeter(rtk_uint32 index, rtk_uint32 *pRate, rtk_uint32 *pIfg) -{ - rtk_uint32 regData; - rtk_uint32 regData2; - ret_t retVal; - - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - { - /*17-bits Rate*/ - retVal = rtl8367c_getAsicReg(RTL8367C_METER_RATE_REG(index), ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_METER_RATE_REG(index) + 1, ®Data2); - if(retVal != RT_ERR_OK) - return retVal; - - *pRate = ((regData2 << 16) & 0x70000) | regData; - /*IFG*/ - retVal = rtl8367c_getAsicRegBit(RTL8367C_METER_IFG_CTRL_REG(index), RTL8367C_METER_IFG_OFFSET(index), pIfg); - - return retVal; - } - else - { - /*17-bits Rate*/ - retVal = rtl8367c_getAsicReg(RTL8367C_REG_METER32_RATE_CTRL0 + ((index-32) << 1), ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_METER32_RATE_CTRL0 + ((index-32) << 1) + 1, ®Data2); - if(retVal != RT_ERR_OK) - return retVal; - - *pRate = ((regData2 << 16) & 0x70000) | regData; - /*IFG*/ - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_METER_IFG_CTRL2 + ((index-32) >> 4), RTL8367C_METER_IFG_OFFSET(index), pIfg); - - return retVal; - } -} -/* Function Name: - * rtl8367c_setAsicShareMeterBucketSize - * Description: - * Set meter related leaky bucket threshold - * Input: - * index - hared meter index (0-31) - * lbthreshold - Leaky bucket threshold of meter - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_setAsicShareMeterBucketSize(rtk_uint32 index, rtk_uint32 lbthreshold) -{ - - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - return rtl8367c_setAsicReg(RTL8367C_METER_BUCKET_SIZE_REG(index), lbthreshold); - else - return rtl8367c_setAsicReg(RTL8367C_REG_METER32_BUCKET_SIZE + index - 32, lbthreshold); -} -/* Function Name: - * rtl8367c_getAsicShareMeterBucketSize - * Description: - * Get meter related leaky bucket threshold - * Input: - * index - hared meter index (0-31) - * pLbthreshold - Leaky bucket threshold of meter - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_getAsicShareMeterBucketSize(rtk_uint32 index, rtk_uint32 *pLbthreshold) -{ - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - return rtl8367c_getAsicReg(RTL8367C_METER_BUCKET_SIZE_REG(index), pLbthreshold); - else - return rtl8367c_getAsicReg(RTL8367C_REG_METER32_BUCKET_SIZE + index - 32, pLbthreshold); -} - -/* Function Name: - * rtl8367c_setAsicShareMeterType - * Description: - * Set meter Type - * Input: - * index - shared meter index (0-31) - * Type - 0: kbps, 1: pps - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_setAsicShareMeterType(rtk_uint32 index, rtk_uint32 type) -{ - rtk_uint32 reg; - - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - reg = RTL8367C_REG_METER_MODE_SETTING0 + (index / 16); - else - reg = RTL8367C_REG_METER_MODE_SETTING2 + ((index - 32) / 16); - return rtl8367c_setAsicRegBit(reg, index % 16, type); -} - -/* Function Name: - * rtl8367c_getAsicShareMeterType - * Description: - * Get meter Type - * Input: - * index - shared meter index (0-31) - * Output: - * pType - 0: kbps, 1: pps - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_getAsicShareMeterType(rtk_uint32 index, rtk_uint32 *pType) -{ - rtk_uint32 reg; - - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(NULL == pType) - return RT_ERR_NULL_POINTER; - - if(index < 32) - reg = RTL8367C_REG_METER_MODE_SETTING0 + (index / 16); - else - reg = RTL8367C_REG_METER_MODE_SETTING2 + ((index - 32) / 16); - return rtl8367c_getAsicRegBit(reg, index % 16, pType); -} - - -/* Function Name: - * rtl8367c_setAsicMeterExceedStatus - * Description: - * Clear shared meter status - * Input: - * index - hared meter index (0-31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_setAsicMeterExceedStatus(rtk_uint32 index) -{ - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - return rtl8367c_setAsicRegBit(RTL8367C_METER_OVERRATE_INDICATOR_REG(index), RTL8367C_METER_EXCEED_OFFSET(index), 1); - else - return rtl8367c_setAsicRegBit(RTL8367C_REG_METER_OVERRATE_INDICATOR2 + ((index - 32) >> 4), RTL8367C_METER_EXCEED_OFFSET(index), 1); - -} -/* Function Name: - * rtl8367c_getAsicMeterExceedStatus - * Description: - * Get shared meter status - * Input: - * index - hared meter index (0-31) - * pStatus - 0: rate doesn't exceed 1: rate exceeds - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * If rate is over rate*8Kbps of a meter, the state bit of this meter is set to 1. - */ -ret_t rtl8367c_getAsicMeterExceedStatus(rtk_uint32 index, rtk_uint32* pStatus) -{ - if(index > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(index < 32) - return rtl8367c_getAsicRegBit(RTL8367C_METER_OVERRATE_INDICATOR_REG(index), RTL8367C_METER_EXCEED_OFFSET(index), pStatus); - else - return rtl8367c_getAsicRegBit(RTL8367C_REG_METER_OVERRATE_INDICATOR2 + ((index - 32) >> 4), RTL8367C_METER_EXCEED_OFFSET(index), pStatus); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_mib.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_mib.c deleted file mode 100644 index c9aaa01d3e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_mib.c +++ /dev/null @@ -1,570 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : MIB related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicMIBsCounterReset - * Description: - * Reset global/queue manage or per-port MIB counter - * Input: - * greset - Global reset - * qmreset - Queue maganement reset - * portmask - Port reset mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsCounterReset(rtk_uint32 greset, rtk_uint32 qmreset, rtk_uint32 portmask) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 regBits; - - regBits = RTL8367C_GLOBAL_RESET_MASK | - RTL8367C_QM_RESET_MASK | - RTL8367C_MIB_PORT07_MASK | - ((rtk_uint32)0x7 << 13); - regData = ((greset << RTL8367C_GLOBAL_RESET_OFFSET) & RTL8367C_GLOBAL_RESET_MASK) | - ((qmreset << RTL8367C_QM_RESET_OFFSET) & RTL8367C_QM_RESET_MASK) | - (((portmask & 0xFF) << RTL8367C_PORT0_RESET_OFFSET) & RTL8367C_MIB_PORT07_MASK) | - (((portmask >> 8)&0x7) << 13); - - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_MIB_CTRL0, regBits, (regData >> RTL8367C_PORT0_RESET_OFFSET)); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicMIBsCounter - * Description: - * Get MIBs counter - * Input: - * port - Physical port number (0~7) - * mibIdx - MIB counter index - * pCounter - MIB retrived counter - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_BUSYWAIT_TIMEOUT - MIB is busy at retrieving - * RT_ERR_STAT_CNTR_FAIL - MIB is resetting - * Note: - * Before MIBs counter retrieving, writting accessing address to ASIC at first and check the MIB - * control register status. If busy bit of MIB control is set, that means MIB counter have been - * waiting for preparing, then software must wait atfer this busy flag reset by ASIC. This driver - * did not recycle reading user desired counter. Software must use driver again to get MIB counter - * if return value is not RT_ERR_OK. - */ -ret_t rtl8367c_getAsicMIBsCounter(rtk_uint32 port, RTL8367C_MIBCOUNTER mibIdx, rtk_uint64* pCounter) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 regData; - rtk_uint32 mibAddr; - rtk_uint32 mibOff=0; - - /* address offset to MIBs counter */ - CONST rtk_uint16 mibLength[RTL8367C_MIBS_NUMBER]= { - 4,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, - 4,2,2,2,2,2,2,2,2, - 4,2,2,2,2,2,2,2,2,2,2,2,2,2,2, - 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2}; - - rtk_uint16 i; - rtk_uint64 mibCounter; - - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(mibIdx >= RTL8367C_MIBS_NUMBER) - return RT_ERR_STAT_INVALID_CNTR; - - if(dot1dTpLearnedEntryDiscards == mibIdx) - { - mibAddr = RTL8367C_MIB_LEARNENTRYDISCARD_OFFSET; - } - else - { - i = 0; - mibOff = RTL8367C_MIB_PORT_OFFSET * port; - - if(port > 7) - mibOff = mibOff + 68; - - while(i < mibIdx) - { - mibOff += mibLength[i]; - i++; - } - - mibAddr = mibOff; - } - - - /*writing access counter address first*/ - /*This address is SRAM address, and SRAM address = MIB register address >> 2*/ - /*then ASIC will prepare 64bits counter wait for being retrived*/ - /*Write Mib related address to access control register*/ - retVal = rtl8367c_setAsicReg(RTL8367C_REG_MIB_ADDRESS, (mibAddr >> 2)); - if(retVal != RT_ERR_OK) - return retVal; - - - - /* polling busy flag */ - i = 100; - while(i > 0) - { - /*read MIB control register*/ - retVal = rtl8367c_getAsicReg(RTL8367C_MIB_CTRL_REG,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - if((regData & RTL8367C_MIB_CTRL0_BUSY_FLAG_MASK) == 0) - { - break; - } - - i--; - } - - if(regData & RTL8367C_MIB_CTRL0_BUSY_FLAG_MASK) - return RT_ERR_BUSYWAIT_TIMEOUT; - - if(regData & RTL8367C_RESET_FLAG_MASK) - return RT_ERR_STAT_CNTR_FAIL; - - mibCounter = 0; - i = mibLength[mibIdx]; - if(4 == i) - regAddr = RTL8367C_MIB_COUNTER_BASE_REG + 3; - else - regAddr = RTL8367C_MIB_COUNTER_BASE_REG + ((mibOff + 1) % 4); - - while(i) - { - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - mibCounter = (mibCounter << 16) | (regData & 0xFFFF); - - regAddr --; - i --; - - } - - *pCounter = mibCounter; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicMIBsLogCounter - * Description: - * Get MIBs Loggin counter - * Input: - * index - The index of 32 logging counter (0 ~ 31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Wrong index - * RT_ERR_BUSYWAIT_TIMEOUT - MIB is busy at retrieving - * RT_ERR_STAT_CNTR_FAIL - MIB is resetting - * Note: - * This API get 32 logging counter - */ -ret_t rtl8367c_getAsicMIBsLogCounter(rtk_uint32 index, rtk_uint32 *pCounter) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 regData; - rtk_uint32 mibAddr; - rtk_uint16 i; - rtk_uint64 mibCounter; - - if(index > RTL8367C_MIB_MAX_LOG_CNT_IDX) - return RT_ERR_ENTRY_INDEX; - - mibAddr = RTL8367C_MIB_LOG_CNT_OFFSET + ((index / 2) * 4); - - retVal = rtl8367c_setAsicReg(RTL8367C_REG_MIB_ADDRESS, (mibAddr >> 2)); - if(retVal != RT_ERR_OK) - return retVal; - - /*read MIB control register*/ - retVal = rtl8367c_getAsicReg(RTL8367C_MIB_CTRL_REG, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - if(regData & RTL8367C_MIB_CTRL0_BUSY_FLAG_MASK) - return RT_ERR_BUSYWAIT_TIMEOUT; - - if(regData & RTL8367C_RESET_FLAG_MASK) - return RT_ERR_STAT_CNTR_FAIL; - - mibCounter = 0; - if((index % 2) == 1) - regAddr = RTL8367C_MIB_COUNTER_BASE_REG + 3; - else - regAddr = RTL8367C_MIB_COUNTER_BASE_REG + 1; - - for(i = 0; i <= 1; i++) - { - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - - if(retVal != RT_ERR_OK) - return retVal; - - mibCounter = (mibCounter << 16) | (regData & 0xFFFF); - - regAddr --; - } - - *pCounter = mibCounter; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicMIBsControl - * Description: - * Get MIB control register - * Input: - * pMask - MIB control status mask bit[0]-busy bit[1] - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * Software need to check this control register atfer doing port resetting or global resetting - */ -ret_t rtl8367c_getAsicMIBsControl(rtk_uint32* pMask) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicReg(RTL8367C_MIB_CTRL_REG, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pMask = regData & (RTL8367C_MIB_CTRL0_BUSY_FLAG_MASK | RTL8367C_RESET_FLAG_MASK); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicMIBsResetValue - * Description: - * Reset all counter to 0 or 1 - * Input: - * value - Reset to value 0 or 1 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsResetValue(rtk_uint32 value) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIB_CTRL0, RTL8367C_RESET_VALUE_OFFSET, value); -} -/* Function Name: - * rtl8367c_getAsicMIBsResetValue - * Description: - * Reset all counter to 0 or 1 - * Input: - * value - Reset to value 0 or 1 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMIBsResetValue(rtk_uint32* value) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIB_CTRL0, RTL8367C_RESET_VALUE_OFFSET, value); -} - -/* Function Name: - * rtl8367c_setAsicMIBsUsageMode - * Description: - * MIB update mode - * Input: - * mode - 1: latch all MIBs by timer 0:normal free run counting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsUsageMode(rtk_uint32 mode) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIB_CTRL4, RTL8367C_MIB_USAGE_MODE_OFFSET, mode); -} -/* Function Name: - * rtl8367c_getAsicMIBsUsageMode - * Description: - * MIB update mode - * Input: - * pMode - 1: latch all MIBs by timer 0:normal free run counting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMIBsUsageMode(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIB_CTRL4, RTL8367C_MIB_USAGE_MODE_OFFSET, pMode); -} - -/* Function Name: - * rtl8367c_setAsicMIBsTimer - * Description: - * MIB latching timer - * Input: - * timer - latch timer, unit 1 second - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsTimer(rtk_uint32 timer) -{ - return rtl8367c_setAsicRegBits(RTL8367C_REG_MIB_CTRL4, RTL8367C_MIB_TIMER_MASK, timer); -} -/* Function Name: - * rtl8367c_getAsicMIBsTimer - * Description: - * MIB latching timer - * Input: - * pTimer - latch timer, unit 1 second - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMIBsTimer(rtk_uint32* pTimer) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_MIB_CTRL4, RTL8367C_MIB_TIMER_MASK, pTimer); -} -/* Function Name: - * rtl8367c_setAsicMIBsLoggingMode - * Description: - * MIB logging counter mode - * Input: - * index - logging counter mode index (0~15) - * mode - 0:32-bits mode 1:64-bits mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsLoggingMode(rtk_uint32 index, rtk_uint32 mode) -{ - if(index > RTL8367C_MIB_MAX_LOG_MODE_IDX) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIB_CTRL3, index,mode); -} -/* Function Name: - * rtl8367c_getAsicMIBsLoggingMode - * Description: - * MIB logging counter mode - * Input: - * index - logging counter mode index (0~15) - * pMode - 0:32-bits mode 1:64-bits mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicMIBsLoggingMode(rtk_uint32 index, rtk_uint32* pMode) -{ - if(index > RTL8367C_MIB_MAX_LOG_MODE_IDX) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIB_CTRL3, index,pMode); -} - -/* Function Name: - * rtl8367c_setAsicMIBsLoggingType - * Description: - * MIB logging counter type - * Input: - * index - logging counter mode index (0~15) - * type - 0:Packet count 1:Byte count - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsLoggingType(rtk_uint32 index, rtk_uint32 type) -{ - if(index > RTL8367C_MIB_MAX_LOG_MODE_IDX) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIB_CTRL5, index,type); -} - -/* Function Name: - * rtl8367c_getAsicMIBsLoggingType - * Description: - * MIB logging counter type - * Input: - * index - logging counter mode index (0~15) - * pType - 0:Packet count 1:Byte count - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicMIBsLoggingType(rtk_uint32 index, rtk_uint32* pType) -{ - if(index > RTL8367C_MIB_MAX_LOG_MODE_IDX) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIB_CTRL5, index,pType); -} - -/* Function Name: - * rtl8367c_setAsicMIBsResetLoggingCounter - * Description: - * MIB logging counter type - * Input: - * index - logging counter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicMIBsResetLoggingCounter(rtk_uint32 index) -{ - ret_t retVal; - - if(index > RTL8367C_MIB_MAX_LOG_CNT_IDX) - return RT_ERR_OUT_OF_RANGE; - - if(index < 16) - retVal = rtl8367c_setAsicReg(RTL8367C_REG_MIB_CTRL1, 1< -/* Function Name: - * rtl8367c_setAsicPortMirror - * Description: - * Set port mirror function - * Input: - * source - Source port - * monitor - Monitor (destination) port - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirror(rtk_uint32 source, rtk_uint32 monitor) -{ - ret_t retVal; - - if((source > RTL8367C_PORTIDMAX) || (monitor > RTL8367C_PORTIDMAX)) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_SOURCE_PORT_MASK, source); - if(retVal != RT_ERR_OK) - return retVal; - - - return rtl8367c_setAsicRegBits(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_MONITOR_PORT_MASK, monitor); -} -/* Function Name: - * rtl8367c_getAsicPortMirror - * Description: - * Get port mirror function - * Input: - * pSource - Source port - * pMonitor - Monitor (destination) port - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirror(rtk_uint32 *pSource, rtk_uint32 *pMonitor) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_SOURCE_PORT_MASK, pSource); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_getAsicRegBits(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_MONITOR_PORT_MASK, pMonitor); -} -/* Function Name: - * rtl8367c_setAsicPortMirrorRxFunction - * Description: - * Set the mirror function on RX of the mirrored - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorRxFunction(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_RX_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorRxFunction - * Description: - * Get the mirror function on RX of the mirrored - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorRxFunction(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_RX_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicPortMirrorTxFunction - * Description: - * Set the mirror function on TX of the mirrored - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorTxFunction(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_TX_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorTxFunction - * Description: - * Get the mirror function on TX of the mirrored - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorTxFunction(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_TX_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicPortMirrorIsolation - * Description: - * Set the traffic isolation on monitor port - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorIsolation(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_ISO_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorIsolation - * Description: - * Get the traffic isolation on monitor port - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorIsolation(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_MIRROR_CTRL_REG, RTL8367C_MIRROR_ISO_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorMask - * Description: - * Set mirror source port mask - * Input: - * SourcePortmask - Source Portmask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK- Port Mask Error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorMask(rtk_uint32 SourcePortmask) -{ - if( SourcePortmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_MIRROR_SRC_PMSK, RTL8367C_MIRROR_SRC_PMSK_MASK, SourcePortmask); -} - -/* Function Name: - * rtl8367c_getAsicPortMirrorMask - * Description: - * Get mirror source port mask - * Input: - * None - * Output: - * pSourcePortmask - Source Portmask - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK- Port Mask Error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorMask(rtk_uint32 *pSourcePortmask) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_MIRROR_SRC_PMSK, RTL8367C_MIRROR_SRC_PMSK_MASK, pSourcePortmask); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorVlanRxLeaky - * Description: - * Set the mirror function of VLAN RX leaky - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorVlanRxLeaky(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_RX_VLAN_LEAKY_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorVlanRxLeaky - * Description: - * Get the mirror function of VLAN RX leaky - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorVlanRxLeaky(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_RX_VLAN_LEAKY_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorVlanTxLeaky - * Description: - * Set the mirror function of VLAN TX leaky - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorVlanTxLeaky(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_TX_VLAN_LEAKY_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorVlanTxLeaky - * Description: - * Get the mirror function of VLAN TX leaky - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorVlanTxLeaky(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_TX_VLAN_LEAKY_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorIsolationRxLeaky - * Description: - * Set the mirror function of Isolation RX leaky - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorIsolationRxLeaky(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_RX_ISOLATION_LEAKY_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorIsolationRxLeaky - * Description: - * Get the mirror function of VLAN RX leaky - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorIsolationRxLeaky(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_RX_ISOLATION_LEAKY_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorIsolationTxLeaky - * Description: - * Set the mirror function of Isolation TX leaky - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorIsolationTxLeaky(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_TX_ISOLATION_LEAKY_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorIsolationTxLeaky - * Description: - * Get the mirror function of VLAN TX leaky - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorIsolationTxLeaky(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_TX_ISOLATION_LEAKY_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorRealKeep - * Description: - * Set the mirror function of keep format - * Input: - * mode - 1: keep original format, 0: follow VLAN config - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorRealKeep(rtk_uint32 mode) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_REALKEEP_EN_OFFSET, mode); -} -/* Function Name: - * rtl8367c_getAsicPortMirrorRealKeep - * Description: - * Get the mirror function of keep format - * Input: - * pMode - 1: keep original format, 0: follow VLAN config - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorRealKeep(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL2, RTL8367C_MIRROR_REALKEEP_EN_OFFSET, pMode); -} - -/* Function Name: - * rtl8367c_setAsicPortMirrorOverride - * Description: - * Set the mirror function of override - * Input: - * rxMirror - 1: output rx Mirror format, 0: output forward format - * txMirror - 1: output tx Mirror format, 0: output forward format - * aclMirror - 1: output ACL Mirror format, 0: output forward format - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortMirrorOverride(rtk_uint32 rxMirror, rtk_uint32 txMirror, rtk_uint32 aclMirror) -{ - ret_t retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL3, RTL8367C_MIRROR_RX_OVERRIDE_EN_OFFSET, rxMirror)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL3, RTL8367C_MIRROR_TX_OVERRIDE_EN_OFFSET, txMirror)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MIRROR_CTRL3, RTL8367C_MIRROR_ACL_OVERRIDE_EN_OFFSET, aclMirror)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicPortMirrorOverride - * Description: - * Get the mirror function of override - * Input: - * None - * Output: - * pRxMirror - 1: output rx Mirror format, 0: output forward format - * pTxMirror - 1: output tx Mirror format, 0: output forward format - * pAclMirror - 1: output ACL Mirror format, 0: output forward format - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortMirrorOverride(rtk_uint32 *pRxMirror, rtk_uint32 *pTxMirror, rtk_uint32 *pAclMirror) -{ - ret_t retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL3, RTL8367C_MIRROR_RX_OVERRIDE_EN_OFFSET, pRxMirror)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL3, RTL8367C_MIRROR_TX_OVERRIDE_EN_OFFSET, pTxMirror)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_MIRROR_CTRL3, RTL8367C_MIRROR_ACL_OVERRIDE_EN_OFFSET, pAclMirror)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_misc.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_misc.c deleted file mode 100644 index 2189b151c3..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_misc.c +++ /dev/null @@ -1,268 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Miscellaneous functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicMacAddress - * Description: - * Set switch MAC address - * Input: - * mac - switch mac - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMacAddress(ether_addr_t mac) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint8 *accessPtr; - rtk_uint32 i; - - accessPtr = (rtk_uint8*)&mac; - - regData = *accessPtr; - accessPtr ++; - regData = (regData << 8) | *accessPtr; - accessPtr ++; - for(i = 0; i <=2; i++) - { - retVal = rtl8367c_setAsicReg(RTL8367C_REG_SWITCH_MAC2 - i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - regData = *accessPtr; - accessPtr ++; - regData = (regData << 8) | *accessPtr; - accessPtr ++; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicMacAddress - * Description: - * Get switch MAC address - * Input: - * pMac - switch mac - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMacAddress(ether_addr_t *pMac) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint8 *accessPtr; - rtk_uint32 i; - - - accessPtr = (rtk_uint8*)pMac; - - for(i = 0; i <= 2; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_REG_SWITCH_MAC2 - i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = (regData & 0xFF00) >> 8; - accessPtr ++; - *accessPtr = regData & 0xFF; - accessPtr ++; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicDebugInfo - * Description: - * Get per-port packet forward debugging information - * Input: - * port - Physical port number (0~7) - * pDebugifo - per-port packet trap/drop/forward reason - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicDebugInfo(rtk_uint32 port, rtk_uint32 *pDebugifo) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_DEBUG_INFO_REG(port), RTL8367C_DEBUG_INFO_MASK(port), pDebugifo); -} -/* Function Name: - * rtl8367c_setAsicPortJamMode - * Description: - * Set half duplex flow control setting - * Input: - * mode - 0: Back-Pressure 1: DEFER - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortJamMode(rtk_uint32 mode) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_CFG_BACKPRESSURE, RTL8367C_LONGTXE_OFFSET,mode); -} -/* Function Name: - * rtl8367c_getAsicPortJamMode - * Description: - * Get half duplex flow control setting - * Input: - * pMode - 0: Back-Pressure 1: DEFER - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortJamMode(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_CFG_BACKPRESSURE, RTL8367C_LONGTXE_OFFSET, pMode); -} - -/* Function Name: - * rtl8367c_setAsicMaxLengthCfg - * Description: - * Set Max packet length configuration - * Input: - * cfgId - Configuration ID - * maxLength - Max Length - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMaxLengthCfg(rtk_uint32 cfgId, rtk_uint32 maxLength) -{ - return rtl8367c_setAsicRegBits(RTL8367C_REG_MAX_LEN_RX_TX_CFG0 + cfgId, RTL8367C_MAX_LEN_RX_TX_CFG0_MASK, maxLength); -} - -/* Function Name: - * rtl8367c_getAsicMaxLengthCfg - * Description: - * Get Max packet length configuration - * Input: - * cfgId - Configuration ID - * maxLength - Max Length - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMaxLengthCfg(rtk_uint32 cfgId, rtk_uint32 *pMaxLength) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_MAX_LEN_RX_TX_CFG0 + cfgId, RTL8367C_MAX_LEN_RX_TX_CFG0_MASK, pMaxLength); -} - -/* Function Name: - * rtl8367c_setAsicMaxLength - * Description: - * Set Max packet length - * Input: - * port - port ID - * type - 0: 10M/100M speed, 1: giga speed - * cfgId - Configuration ID - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicMaxLength(rtk_uint32 port, rtk_uint32 type, rtk_uint32 cfgId) -{ - ret_t retVal; - - if(port < 8) - { - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MAX_LENGTH_CFG, (type * 8) + port, cfgId); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MAX_LENGTH_CFG_EXT, (type * 3) + port - 8, cfgId); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicMaxLength - * Description: - * Get Max packet length - * Input: - * port - port ID - * type - 0: 10M/100M speed, 1: giga speed - * cfgId - Configuration ID - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicMaxLength(rtk_uint32 port, rtk_uint32 type, rtk_uint32 *pCfgId) -{ - ret_t retVal; - - if(port < 8) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_MAX_LENGTH_CFG, (type * 8) + port, pCfgId); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_MAX_LENGTH_CFG_EXT, (type * 3) + port - 8, pCfgId); - if(retVal != RT_ERR_OK) - return retVal; - } - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_oam.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_oam.c deleted file mode 100644 index 1556f4500d..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_oam.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 42321 $ - * $Date: 2013-08-26 13:51:29 +0800 (週一, 26 八月 2013) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : OAM related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicOamParser - * Description: - * Set OAM parser state - * Input: - * port - Physical port number (0~7) - * parser - Per-Port OAM parser state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_NOT_ALLOWED - Invalid paser state - * Note: - * None - */ -ret_t rtl8367c_setAsicOamParser(rtk_uint32 port, rtk_uint32 parser) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(parser > OAM_PARFWDCPU) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_OAM_PARSER_CTRL0 + port/8, RTL8367C_OAM_PARSER_MASK(port % 8), parser); -} -/* Function Name: - * rtl8367c_getAsicOamParser - * Description: - * Get OAM parser state - * Input: - * port - Physical port number (0~7) - * pParser - Per-Port OAM parser state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicOamParser(rtk_uint32 port, rtk_uint32* pParser) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_OAM_PARSER_CTRL0 + port/8, RTL8367C_OAM_PARSER_MASK(port%8), pParser); -} -/* Function Name: - * rtl8367c_setAsicOamMultiplexer - * Description: - * Set OAM multiplexer state - * Input: - * port - Physical port number (0~7) - * multiplexer - Per-Port OAM multiplexer state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_NOT_ALLOWED - Invalid multiplexer state - * Note: - * None - */ -ret_t rtl8367c_setAsicOamMultiplexer(rtk_uint32 port, rtk_uint32 multiplexer) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(multiplexer > OAM_MULCPU) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_OAM_MULTIPLEXER_CTRL0 + port/8, RTL8367C_OAM_MULTIPLEXER_MASK(port%8), multiplexer); -} -/* Function Name: - * rtl8367c_getAsicOamMultiplexer - * Description: - * Get OAM multiplexer state - * Input: - * port - Physical port number (0~7) - * pMultiplexer - Per-Port OAM multiplexer state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicOamMultiplexer(rtk_uint32 port, rtk_uint32* pMultiplexer) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_OAM_MULTIPLEXER_CTRL0 + port/8, RTL8367C_OAM_MULTIPLEXER_MASK(port%8), pMultiplexer); -} -/* Function Name: - * rtl8367c_setAsicOamCpuPri - * Description: - * Set trap priority for OAM packet - * Input: - * priority - priority (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicOamCpuPri(rtk_uint32 priority) -{ - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_QOS_TRAP_PRIORITY0, RTL8367C_OAM_PRIOIRTY_MASK, priority); -} -/* Function Name: - * rtl8367c_getAsicOamCpuPri - * Description: - * Get trap priority for OAM packet - * Input: - * pPriority - priority (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicOamCpuPri(rtk_uint32 *pPriority) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_QOS_TRAP_PRIORITY0, RTL8367C_OAM_PRIOIRTY_MASK, pPriority); -} -/* Function Name: - * rtl8367c_setAsicOamEnable - * Description: - * Set OAM function state - * Input: - * enabled - OAM function usage 1:enable, 0:disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicOamEnable(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_OAM_CTRL, RTL8367C_OAM_CTRL_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicOamEnable - * Description: - * Get OAM function state - * Input: - * pEnabled - OAM function usage 1:enable, 0:disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicOamEnable(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_OAM_CTRL, RTL8367C_OAM_CTRL_OFFSET, pEnabled); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_phy.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_phy.c deleted file mode 100644 index fb4db113a9..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_phy.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : PHY related functions - * - */ -#include - -#if defined(MDC_MDIO_OPERATION) -/* Function Name: - * rtl8367c_setAsicPHYOCPReg - * Description: - * Set PHY OCP registers - * Input: - * phyNo - Physical port number (0~7) - * ocpAddr - OCP address - * ocpData - Writing data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PHY_REG_ID - invalid PHY address - * RT_ERR_PHY_ID - invalid PHY no - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * None - */ -ret_t rtl8367c_setAsicPHYOCPReg(rtk_uint32 phyNo, rtk_uint32 ocpAddr, rtk_uint32 ocpData ) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 ocpAddrPrefix, ocpAddr9_6, ocpAddr5_1; - - /* OCP prefix */ - ocpAddrPrefix = ((ocpAddr & 0xFC00) >> 10); - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_GPHY_OCP_MSB_0, RTL8367C_CFG_CPU_OCPADR_MSB_MASK, ocpAddrPrefix)) != RT_ERR_OK) - return retVal; - - /*prepare access address*/ - ocpAddr9_6 = ((ocpAddr >> 6) & 0x000F); - ocpAddr5_1 = ((ocpAddr >> 1) & 0x001F); - regAddr = RTL8367C_PHY_BASE | (ocpAddr9_6 << 8) | (phyNo << RTL8367C_PHY_OFFSET) | ocpAddr5_1; - if((retVal = rtl8367c_setAsicReg(regAddr, ocpData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicPHYOCPReg - * Description: - * Get PHY OCP registers - * Input: - * phyNo - Physical port number (0~7) - * ocpAddr - PHY address - * pRegData - read data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PHY_REG_ID - invalid PHY address - * RT_ERR_PHY_ID - invalid PHY no - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * None - */ -ret_t rtl8367c_getAsicPHYOCPReg(rtk_uint32 phyNo, rtk_uint32 ocpAddr, rtk_uint32 *pRegData ) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 ocpAddrPrefix, ocpAddr9_6, ocpAddr5_1; - /* OCP prefix */ - ocpAddrPrefix = ((ocpAddr & 0xFC00) >> 10); - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_GPHY_OCP_MSB_0, RTL8367C_CFG_CPU_OCPADR_MSB_MASK, ocpAddrPrefix)) != RT_ERR_OK) - return retVal; - - /*prepare access address*/ - ocpAddr9_6 = ((ocpAddr >> 6) & 0x000F); - ocpAddr5_1 = ((ocpAddr >> 1) & 0x001F); - regAddr = RTL8367C_PHY_BASE | (ocpAddr9_6 << 8) | (phyNo << RTL8367C_PHY_OFFSET) | ocpAddr5_1; - if((retVal = rtl8367c_getAsicReg(regAddr, pRegData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -#else - -/* Function Name: - * rtl8367c_setAsicPHYOCPReg - * Description: - * Set PHY OCP registers - * Input: - * phyNo - Physical port number (0~7) - * ocpAddr - OCP address - * ocpData - Writing data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PHY_REG_ID - invalid PHY address - * RT_ERR_PHY_ID - invalid PHY no - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * None - */ -ret_t rtl8367c_setAsicPHYOCPReg(rtk_uint32 phyNo, rtk_uint32 ocpAddr, rtk_uint32 ocpData ) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 busyFlag, checkCounter; - rtk_uint32 ocpAddrPrefix, ocpAddr9_6, ocpAddr5_1; - - /*Check internal phy access busy or not*/ - /*retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_INDRECT_ACCESS_STATUS, RTL8367C_INDRECT_ACCESS_STATUS_OFFSET,&busyFlag);*/ - retVal = rtl8367c_getAsicReg(RTL8367C_REG_INDRECT_ACCESS_STATUS,&busyFlag); - if(retVal != RT_ERR_OK) - return retVal; - - if(busyFlag) - return RT_ERR_BUSYWAIT_TIMEOUT; - - /* OCP prefix */ - ocpAddrPrefix = ((ocpAddr & 0xFC00) >> 10); - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_GPHY_OCP_MSB_0, RTL8367C_CFG_CPU_OCPADR_MSB_MASK, ocpAddrPrefix)) != RT_ERR_OK) - return retVal; - - /*prepare access data*/ - retVal = rtl8367c_setAsicReg(RTL8367C_REG_INDRECT_ACCESS_WRITE_DATA, ocpData); - if(retVal != RT_ERR_OK) - return retVal; - - /*prepare access address*/ - ocpAddr9_6 = ((ocpAddr >> 6) & 0x000F); - ocpAddr5_1 = ((ocpAddr >> 1) & 0x001F); - regData = RTL8367C_PHY_BASE | (ocpAddr9_6 << 8) | (phyNo << RTL8367C_PHY_OFFSET) | ocpAddr5_1; - retVal = rtl8367c_setAsicReg(RTL8367C_REG_INDRECT_ACCESS_ADDRESS, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /*Set WRITE Command*/ - retVal = rtl8367c_setAsicReg(RTL8367C_REG_INDRECT_ACCESS_CTRL, RTL8367C_CMD_MASK | RTL8367C_RW_MASK); - - checkCounter = 100; - while(checkCounter) - { - retVal = rtl8367c_getAsicReg(RTL8367C_REG_INDRECT_ACCESS_STATUS,&busyFlag); - if((retVal != RT_ERR_OK) || busyFlag) - { - checkCounter --; - if(0 == checkCounter) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - else - { - checkCounter = 0; - } - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicPHYOCPReg - * Description: - * Get PHY OCP registers - * Input: - * phyNo - Physical port number (0~7) - * ocpAddr - PHY address - * pRegData - read data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PHY_REG_ID - invalid PHY address - * RT_ERR_PHY_ID - invalid PHY no - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * None - */ -ret_t rtl8367c_getAsicPHYOCPReg(rtk_uint32 phyNo, rtk_uint32 ocpAddr, rtk_uint32 *pRegData ) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 busyFlag,checkCounter; - rtk_uint32 ocpAddrPrefix, ocpAddr9_6, ocpAddr5_1; - /*Check internal phy access busy or not*/ - /*retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_INDRECT_ACCESS_STATUS, RTL8367C_INDRECT_ACCESS_STATUS_OFFSET,&busyFlag);*/ - retVal = rtl8367c_getAsicReg(RTL8367C_REG_INDRECT_ACCESS_STATUS,&busyFlag); - if(retVal != RT_ERR_OK) - return retVal; - - if(busyFlag) - return RT_ERR_BUSYWAIT_TIMEOUT; - - /* OCP prefix */ - ocpAddrPrefix = ((ocpAddr & 0xFC00) >> 10); - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_GPHY_OCP_MSB_0, RTL8367C_CFG_CPU_OCPADR_MSB_MASK, ocpAddrPrefix)) != RT_ERR_OK) - return retVal; - - /*prepare access address*/ - ocpAddr9_6 = ((ocpAddr >> 6) & 0x000F); - ocpAddr5_1 = ((ocpAddr >> 1) & 0x001F); - regData = RTL8367C_PHY_BASE | (ocpAddr9_6 << 8) | (phyNo << RTL8367C_PHY_OFFSET) | ocpAddr5_1; - retVal = rtl8367c_setAsicReg(RTL8367C_REG_INDRECT_ACCESS_ADDRESS, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /*Set READ Command*/ - retVal = rtl8367c_setAsicReg(RTL8367C_REG_INDRECT_ACCESS_CTRL, RTL8367C_CMD_MASK ); - if(retVal != RT_ERR_OK) - return retVal; - - checkCounter = 100; - while(checkCounter) - { - retVal = rtl8367c_getAsicReg(RTL8367C_REG_INDRECT_ACCESS_STATUS,&busyFlag); - if((retVal != RT_ERR_OK) || busyFlag) - { - checkCounter --; - if(0 == checkCounter) - return RT_ERR_FAILED; - } - else - { - checkCounter = 0; - } - } - - /*get PHY register*/ - retVal = rtl8367c_getAsicReg(RTL8367C_REG_INDRECT_ACCESS_READ_DATA, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *pRegData = regData; - - return RT_ERR_OK; -} - -#endif - -/* Function Name: - * rtl8367c_setAsicPHYReg - * Description: - * Set PHY registers - * Input: - * phyNo - Physical port number (0~7) - * phyAddr - PHY address (0~31) - * phyData - Writing data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PHY_REG_ID - invalid PHY address - * RT_ERR_PHY_ID - invalid PHY no - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * None - */ -ret_t rtl8367c_setAsicPHYReg(rtk_uint32 phyNo, rtk_uint32 phyAddr, rtk_uint32 phyData ) -{ - rtk_uint32 ocp_addr; - - if(phyAddr > RTL8367C_PHY_REGNOMAX) - return RT_ERR_PHY_REG_ID; - - ocp_addr = 0xa400 + phyAddr*2; - - return rtl8367c_setAsicPHYOCPReg(phyNo, ocp_addr, phyData); -} -/* Function Name: - * rtl8367c_getAsicPHYReg - * Description: - * Get PHY registers - * Input: - * phyNo - Physical port number (0~7) - * phyAddr - PHY address (0~31) - * pRegData - Writing data - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PHY_REG_ID - invalid PHY address - * RT_ERR_PHY_ID - invalid PHY no - * RT_ERR_BUSYWAIT_TIMEOUT - PHY access busy - * Note: - * None - */ -ret_t rtl8367c_getAsicPHYReg(rtk_uint32 phyNo, rtk_uint32 phyAddr, rtk_uint32 *pRegData ) -{ - rtk_uint32 ocp_addr; - - if(phyAddr > RTL8367C_PHY_REGNOMAX) - return RT_ERR_PHY_REG_ID; - - ocp_addr = 0xa400 + phyAddr*2; - - return rtl8367c_getAsicPHYOCPReg(phyNo, ocp_addr, pRegData); -} - - -/* Function Name: - * rtl8367c_setAsicSdsReg - * Description: - * Set Serdes registers - * Input: - * sdsId - sdsid (0~1) - * sdsReg - reg address (0~31) - * sdsPage - Writing data - * Output: - * None - * Return: - * RT_ERR_OK - Success - - * Note: - * None - */ - -ret_t rtl8367c_setAsicSdsReg(rtk_uint32 sdsId, rtk_uint32 sdsReg, rtk_uint32 sdsPage, rtk_uint32 value) -{ - rtk_uint32 retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, value)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (sdsPage<<5) | sdsReg)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0|sdsId)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtl8367c_getAiscSdsReg - * Description: - * Get Serdes registers - * Input: - * sdsId - sdsid (0~1) - * sdsReg - reg address (0~31) - * sdsPage - Writing data - * Output: - * None - * Return: - * RT_ERR_OK - Success - - * Note: - * None - */ -ret_t rtl8367c_getAsicSdsReg(rtk_uint32 sdsId, rtk_uint32 sdsReg, rtk_uint32 sdsPage, rtk_uint32 *value) -{ - rtk_uint32 retVal, busy; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (sdsPage<<5) | sdsReg)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x0080|sdsId)) != RT_ERR_OK) - return retVal; - - while(1) - { - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_SDS_INDACS_CMD, &busy))!=RT_ERR_OK) - return retVal; - - if ((busy & 0x100) == 0) - break; - } - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_SDS_INDACS_DATA, value))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_port.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_port.c deleted file mode 100644 index 78e80a0b20..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_port.c +++ /dev/null @@ -1,5752 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76333 $ - * $Date: 2017-03-09 09:33:15 +0800 (週四, 09 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port security related functions - * - */ - -#include - -#include - - -#define FIBER2_AUTO_INIT_SIZE 2038 -rtk_uint8 Fiber2_Auto[FIBER2_AUTO_INIT_SIZE] = { -0x02,0x05,0x8F,0xE4,0xF5,0xA8,0xD2,0xAF, -0x22,0x00,0x00,0x02,0x07,0x2C,0xC5,0xF0, -0xF8,0xA3,0xE0,0x28,0xF0,0xC5,0xF0,0xF8, -0xE5,0x82,0x15,0x82,0x70,0x02,0x15,0x83, -0xE0,0x38,0xF0,0x22,0x75,0xF0,0x08,0x75, -0x82,0x00,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xCD,0x33,0xCD,0xCC,0x33,0xCC,0xC5,0x82, -0x33,0xC5,0x82,0x9B,0xED,0x9A,0xEC,0x99, -0xE5,0x82,0x98,0x40,0x0C,0xF5,0x82,0xEE, -0x9B,0xFE,0xED,0x9A,0xFD,0xEC,0x99,0xFC, -0x0F,0xD5,0xF0,0xD6,0xE4,0xCE,0xFB,0xE4, -0xCD,0xFA,0xE4,0xCC,0xF9,0xA8,0x82,0x22, -0xB8,0x00,0xC1,0xB9,0x00,0x59,0xBA,0x00, -0x2D,0xEC,0x8B,0xF0,0x84,0xCF,0xCE,0xCD, -0xFC,0xE5,0xF0,0xCB,0xF9,0x78,0x18,0xEF, -0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33,0xFD, -0xEC,0x33,0xFC,0xEB,0x33,0xFB,0x10,0xD7, -0x03,0x99,0x40,0x04,0xEB,0x99,0xFB,0x0F, -0xD8,0xE5,0xE4,0xF9,0xFA,0x22,0x78,0x18, -0xEF,0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33, -0xFD,0xEC,0x33,0xFC,0xC9,0x33,0xC9,0x10, -0xD7,0x05,0x9B,0xE9,0x9A,0x40,0x07,0xEC, -0x9B,0xFC,0xE9,0x9A,0xF9,0x0F,0xD8,0xE0, -0xE4,0xC9,0xFA,0xE4,0xCC,0xFB,0x22,0x75, -0xF0,0x10,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xED,0x33,0xFD,0xCC,0x33,0xCC,0xC8,0x33, -0xC8,0x10,0xD7,0x07,0x9B,0xEC,0x9A,0xE8, -0x99,0x40,0x0A,0xED,0x9B,0xFD,0xEC,0x9A, -0xFC,0xE8,0x99,0xF8,0x0F,0xD5,0xF0,0xDA, -0xE4,0xCD,0xFB,0xE4,0xCC,0xFA,0xE4,0xC8, -0xF9,0x22,0xEB,0x9F,0xF5,0xF0,0xEA,0x9E, -0x42,0xF0,0xE9,0x9D,0x42,0xF0,0xE8,0x9C, -0x45,0xF0,0x22,0xE0,0xFC,0xA3,0xE0,0xFD, -0xA3,0xE0,0xFE,0xA3,0xE0,0xFF,0x22,0xE0, -0xF8,0xA3,0xE0,0xF9,0xA3,0xE0,0xFA,0xA3, -0xE0,0xFB,0x22,0xEC,0xF0,0xA3,0xED,0xF0, -0xA3,0xEE,0xF0,0xA3,0xEF,0xF0,0x22,0x7D, -0xD7,0x7C,0x04,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0x80,0x7C,0x04,0x7F,0x01, -0x7E,0x66,0x12,0x07,0xAB,0x7D,0xC0,0x7C, -0x00,0x7F,0x00,0x7E,0x66,0x12,0x07,0xAB, -0x7D,0x94,0x7C,0xF9,0x7F,0x02,0x7E,0x66, -0x12,0x07,0xAB,0x7D,0x81,0x7C,0x04,0x7F, -0x01,0x7E,0x66,0x12,0x07,0xAB,0x7D,0xC0, -0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0xA2,0x7C,0x31,0x7F,0x02,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0x82,0x7C,0x04, -0x7F,0x01,0x7E,0x66,0x12,0x07,0xAB,0x7D, -0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0x60,0x7C,0x69,0x7F,0x02, -0x7E,0x66,0x12,0x07,0xAB,0x7D,0x83,0x7C, -0x04,0x7F,0x01,0x7E,0x66,0x12,0x07,0xAB, -0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66, -0x12,0x07,0xAB,0x7D,0x28,0x7C,0x97,0x7F, -0x02,0x7E,0x66,0x12,0x07,0xAB,0x7D,0x84, -0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0x85,0x7C,0x9D, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xAB,0x7D, -0x23,0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xAB,0x7D,0x10,0x7C, -0xD8,0x7F,0x02,0x7E,0x66,0x12,0x07,0xAB, -0x7D,0x24,0x7C,0x04,0x7F,0x01,0x7E,0x66, -0x12,0x07,0xAB,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x07,0xAB,0x7D,0x00, -0x7C,0x04,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0x2F,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x02,0x07,0xAB,0x7D, -0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0x80,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xAB,0x7F,0x02,0x7E, -0x66,0x12,0x07,0x66,0xEF,0x44,0x40,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xAB,0x7D, -0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0x80,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xAB,0x7F,0x02,0x7E, -0x66,0x12,0x07,0x66,0xEF,0x54,0xBF,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xAB,0xE4, -0xFD,0xFC,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0x80,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xAB,0x7F,0x02,0x7E,0x66, -0x12,0x07,0x66,0xEF,0x54,0xFD,0x54,0xFE, -0xFD,0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xAB,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xAB,0xE4, -0xFD,0xFC,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0x80,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xAB,0x7F,0x02,0x7E,0x66, -0x12,0x07,0x66,0xEF,0x44,0x02,0x44,0x01, -0xFD,0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xAB,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xAB,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x02,0x07,0xAB,0xE4, -0x90,0x06,0x2C,0xF0,0xFD,0x7C,0x01,0x7F, -0x3F,0x7E,0x1D,0x12,0x07,0xAB,0x7D,0x40, -0x7C,0x00,0x7F,0x36,0x7E,0x13,0x12,0x07, -0xAB,0xE4,0xFF,0xFE,0xFD,0x80,0x25,0xE4, -0x7F,0xFF,0x7E,0xFF,0xFD,0xFC,0x90,0x06, -0x24,0x12,0x01,0x0F,0xC3,0x12,0x00,0xF2, -0x50,0x1B,0x90,0x06,0x24,0x12,0x01,0x03, -0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE,0xE4, -0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06,0x24, -0x12,0x01,0x1B,0x80,0xD2,0xE4,0xF5,0xA8, -0xD2,0xAF,0x7D,0x1F,0xFC,0x7F,0x49,0x7E, -0x13,0x12,0x07,0xAB,0x12,0x07,0xDB,0x12, -0x01,0x27,0x12,0x06,0x1B,0x12,0x07,0x8A, -0x12,0x06,0xEA,0x7D,0x41,0x7C,0x00,0x7F, -0x36,0x7E,0x13,0x12,0x07,0xAB,0xE4,0xFF, -0xFE,0xFD,0x80,0x26,0x7F,0xFF,0x7E,0xFF, -0x7D,0x05,0x7C,0x00,0x90,0x06,0x24,0x12, -0x01,0x0F,0xC3,0x12,0x00,0xF2,0x50,0x1B, -0x90,0x06,0x24,0x12,0x01,0x03,0xEF,0x24, -0x01,0xFF,0xE4,0x3E,0xFE,0xE4,0x3D,0xFD, -0xE4,0x3C,0xFC,0x90,0x06,0x24,0x12,0x01, -0x1B,0x80,0xD1,0xC2,0x00,0xC2,0x01,0xD2, -0xA9,0xD2,0x8C,0x7F,0x01,0x7E,0x62,0x12, -0x07,0x66,0xEF,0x30,0xE2,0x07,0xE4,0x90, -0x06,0x2C,0xF0,0x80,0xEE,0x90,0x06,0x2C, -0xE0,0x70,0x12,0x12,0x04,0xF0,0x90,0x06, -0x2C,0x74,0x01,0xF0,0xE4,0x90,0x06,0x33, -0xF0,0xA3,0xF0,0x80,0xD6,0xC3,0x90,0x06, -0x34,0xE0,0x94,0x62,0x90,0x06,0x33,0xE0, -0x94,0x00,0x40,0xC7,0xE4,0xF0,0xA3,0xF0, -0x12,0x04,0xF0,0x90,0x06,0x2C,0x74,0x01, -0xF0,0x80,0xB8,0x75,0x0F,0x80,0x75,0x0E, -0x7E,0x75,0x0D,0xAA,0x75,0x0C,0x83,0xE4, -0xF5,0x10,0x7F,0x36,0x7E,0x13,0x12,0x07, -0x66,0xEE,0xC4,0xF8,0x54,0xF0,0xC8,0xEF, -0xC4,0x54,0x0F,0x48,0x54,0x07,0xFB,0x7A, -0x00,0xEA,0x70,0x4A,0xEB,0x14,0x60,0x1C, -0x14,0x60,0x27,0x24,0xFE,0x60,0x31,0x14, -0x60,0x3C,0x24,0x05,0x70,0x38,0x75,0x0B, -0x00,0x75,0x0A,0xC2,0x75,0x09,0xEB,0x75, -0x08,0x0B,0x80,0x36,0x75,0x0B,0x40,0x75, -0x0A,0x59,0x75,0x09,0x73,0x75,0x08,0x07, -0x80,0x28,0x75,0x0B,0x00,0x75,0x0A,0xE1, -0x75,0x09,0xF5,0x75,0x08,0x05,0x80,0x1A, -0x75,0x0B,0xA0,0x75,0x0A,0xAC,0x75,0x09, -0xB9,0x75,0x08,0x03,0x80,0x0C,0x75,0x0B, -0x00,0x75,0x0A,0x62,0x75,0x09,0x3D,0x75, -0x08,0x01,0x75,0x89,0x11,0xE4,0x7B,0x60, -0x7A,0x09,0xF9,0xF8,0xAF,0x0B,0xAE,0x0A, -0xAD,0x09,0xAC,0x08,0x12,0x00,0x60,0xAA, -0x06,0xAB,0x07,0xC3,0xE4,0x9B,0xFB,0xE4, -0x9A,0xFA,0x78,0x17,0xF6,0xAF,0x03,0xEF, -0x08,0xF6,0x18,0xE6,0xF5,0x8C,0x08,0xE6, -0xF5,0x8A,0x74,0x0D,0x2B,0xFB,0xE4,0x3A, -0x18,0xF6,0xAF,0x03,0xEF,0x08,0xF6,0x75, -0x88,0x10,0x53,0x8E,0xC7,0xD2,0xA9,0x22, -0x7F,0x10,0x7E,0x13,0x12,0x07,0x66,0x90, -0x06,0x2D,0xEE,0xF0,0xA3,0xEF,0xF0,0xEE, -0x44,0x10,0xFE,0x90,0x06,0x2D,0xF0,0xA3, -0xEF,0xF0,0x54,0xEF,0xFF,0x90,0x06,0x2D, -0xEE,0xF0,0xFC,0xA3,0xEF,0xF0,0xFD,0x7F, -0x10,0x7E,0x13,0x12,0x07,0xAB,0xE4,0xFF, -0xFE,0x0F,0xBF,0x00,0x01,0x0E,0xEF,0x64, -0x64,0x4E,0x70,0xF5,0x7D,0x04,0x7C,0x00, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xAB,0x7D, -0x00,0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xAB,0xE4,0xFD,0xFC, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xAB,0x7D, -0x00,0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xAB,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xAB,0x7F,0x10,0x7E, -0x13,0x12,0x07,0x66,0x90,0x06,0x2D,0xEE, -0xF0,0xA3,0xEF,0xF0,0xEE,0x54,0xEF,0x90, -0x06,0x2D,0xF0,0xFC,0xA3,0xEF,0xF0,0xFD, -0x7F,0x10,0x7E,0x13,0x02,0x07,0xAB,0x78, -0x7F,0xE4,0xF6,0xD8,0xFD,0x75,0x81,0x3C, -0x02,0x05,0xD6,0x02,0x03,0x2F,0xE4,0x93, -0xA3,0xF8,0xE4,0x93,0xA3,0x40,0x03,0xF6, -0x80,0x01,0xF2,0x08,0xDF,0xF4,0x80,0x29, -0xE4,0x93,0xA3,0xF8,0x54,0x07,0x24,0x0C, -0xC8,0xC3,0x33,0xC4,0x54,0x0F,0x44,0x20, -0xC8,0x83,0x40,0x04,0xF4,0x56,0x80,0x01, -0x46,0xF6,0xDF,0xE4,0x80,0x0B,0x01,0x02, -0x04,0x08,0x10,0x20,0x40,0x80,0x90,0x07, -0xE7,0xE4,0x7E,0x01,0x93,0x60,0xBC,0xA3, -0xFF,0x54,0x3F,0x30,0xE5,0x09,0x54,0x1F, -0xFE,0xE4,0x93,0xA3,0x60,0x01,0x0E,0xCF, -0x54,0xC0,0x25,0xE0,0x60,0xA8,0x40,0xB8, -0xE4,0x93,0xA3,0xFA,0xE4,0x93,0xA3,0xF8, -0xE4,0x93,0xA3,0xC8,0xC5,0x82,0xC8,0xCA, -0xC5,0x83,0xCA,0xF0,0xA3,0xC8,0xC5,0x82, -0xC8,0xCA,0xC5,0x83,0xCA,0xDF,0xE9,0xDE, -0xE7,0x80,0xBE,0x7D,0x40,0x7C,0x17,0x7F, -0x11,0x7E,0x1D,0x12,0x07,0xAB,0x7F,0x41, -0x7E,0x1D,0x12,0x07,0x66,0xEF,0x44,0x20, -0x44,0x80,0xFD,0xAC,0x06,0x7F,0x41,0x7E, -0x1D,0x12,0x07,0xAB,0x7D,0xBB,0x7C,0x15, -0x7F,0xEB,0x7E,0x13,0x12,0x07,0xAB,0x7D, -0x07,0x7C,0x00,0x7F,0xE7,0x7E,0x13,0x12, -0x07,0xAB,0x7D,0x40,0x7C,0x11,0x7F,0x00, -0x7E,0x62,0x12,0x07,0xAB,0x02,0x02,0x2F, -0x7D,0xC0,0x7C,0x16,0x7F,0x11,0x7E,0x1D, -0x12,0x07,0xAB,0x7D,0xBB,0x7C,0x15,0x7F, -0xEB,0x7E,0x13,0x12,0x07,0xAB,0x7D,0x0D, -0x7C,0x00,0x7F,0xE7,0x7E,0x13,0x12,0x07, -0xAB,0x7F,0x41,0x7E,0x1D,0x12,0x07,0x66, -0xEF,0x44,0x20,0x44,0x80,0xFD,0xAC,0x06, -0x7F,0x41,0x7E,0x1D,0x12,0x07,0xAB,0x7D, -0x00,0x7C,0x21,0x7F,0x00,0x7E,0x62,0x12, -0x07,0xAB,0x02,0x02,0x2F,0x7D,0x40,0x7C, -0x17,0x7F,0x11,0x7E,0x1D,0x12,0x07,0xAB, -0x7D,0xBB,0x7C,0x15,0x7F,0xEB,0x7E,0x13, -0x12,0x07,0xAB,0x7D,0x0C,0x7C,0x00,0x7F, -0xE7,0x7E,0x13,0x12,0x07,0xAB,0x7F,0x41, -0x7E,0x1D,0x12,0x07,0x66,0xEF,0x44,0x20, -0x44,0x80,0xFD,0xAC,0x06,0x7F,0x41,0x7E, -0x1D,0x12,0x07,0xAB,0x7D,0x40,0x7C,0x11, -0x7F,0x00,0x7E,0x62,0x12,0x07,0xAB,0x02, -0x02,0x2F,0x7D,0x04,0x7C,0x00,0x7F,0x01, -0x7E,0x66,0x12,0x07,0xAB,0x7D,0x80,0x7C, -0x00,0x7F,0x00,0x7E,0x66,0x12,0x07,0xAB, -0x7F,0x02,0x7E,0x66,0x12,0x07,0x66,0xEF, -0x44,0x02,0x44,0x04,0xFD,0xAC,0x06,0x7F, -0x02,0x7E,0x66,0x12,0x07,0xAB,0x7D,0x04, -0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xAB,0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x02,0x07,0xAB,0xC0,0xE0,0xC0,0xF0, -0xC0,0x83,0xC0,0x82,0xC0,0xD0,0x75,0xD0, -0x00,0xC0,0x00,0x78,0x17,0xE6,0xF5,0x8C, -0x78,0x18,0xE6,0xF5,0x8A,0x90,0x06,0x31, -0xE4,0x75,0xF0,0x01,0x12,0x00,0x0E,0x90, -0x06,0x33,0xE4,0x75,0xF0,0x01,0x12,0x00, -0x0E,0xD0,0x00,0xD0,0xD0,0xD0,0x82,0xD0, -0x83,0xD0,0xF0,0xD0,0xE0,0x32,0xC2,0xAF, -0xAD,0x07,0xAC,0x06,0x8C,0xA2,0x8D,0xA3, -0x75,0xA0,0x01,0x00,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0xAE,0xA1, -0xBE,0x00,0xF0,0xAE,0xA6,0xAF,0xA7,0xD2, -0xAF,0x22,0x7D,0x20,0x7C,0x0F,0x7F,0x02, -0x7E,0x66,0x12,0x07,0xAB,0x7D,0x01,0x7C, -0x00,0x7F,0x01,0x7E,0x66,0x12,0x07,0xAB, -0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66, -0x02,0x07,0xAB,0xC2,0xAF,0xAB,0x07,0xAA, -0x06,0x8A,0xA2,0x8B,0xA3,0x8C,0xA4,0x8D, -0xA5,0x75,0xA0,0x03,0x00,0x00,0x00,0xAA, -0xA1,0xBA,0x00,0xF8,0xD2,0xAF,0x22,0x7F, -0x0C,0x7E,0x13,0x12,0x07,0x66,0xEF,0x44, -0x50,0xFD,0xAC,0x06,0x7F,0x0C,0x7E,0x13, -0x02,0x07,0xAB,0x12,0x07,0xC7,0x12,0x07, -0xF2,0x12,0x04,0x2B,0x02,0x00,0x03,0x42, -0x06,0x33,0x00,0x00,0x42,0x06,0x31,0x00, -0x00,0x00,0xE4,0xF5,0x8E,0x22,}; - -#define FIBER2_1G_INIT_SIZE 2032 -rtk_uint8 Fiber2_1G[FIBER2_1G_INIT_SIZE] = { -0x02,0x05,0x89,0xE4,0xF5,0xA8,0xD2,0xAF, -0x22,0x00,0x00,0x02,0x07,0x26,0xC5,0xF0, -0xF8,0xA3,0xE0,0x28,0xF0,0xC5,0xF0,0xF8, -0xE5,0x82,0x15,0x82,0x70,0x02,0x15,0x83, -0xE0,0x38,0xF0,0x22,0x75,0xF0,0x08,0x75, -0x82,0x00,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xCD,0x33,0xCD,0xCC,0x33,0xCC,0xC5,0x82, -0x33,0xC5,0x82,0x9B,0xED,0x9A,0xEC,0x99, -0xE5,0x82,0x98,0x40,0x0C,0xF5,0x82,0xEE, -0x9B,0xFE,0xED,0x9A,0xFD,0xEC,0x99,0xFC, -0x0F,0xD5,0xF0,0xD6,0xE4,0xCE,0xFB,0xE4, -0xCD,0xFA,0xE4,0xCC,0xF9,0xA8,0x82,0x22, -0xB8,0x00,0xC1,0xB9,0x00,0x59,0xBA,0x00, -0x2D,0xEC,0x8B,0xF0,0x84,0xCF,0xCE,0xCD, -0xFC,0xE5,0xF0,0xCB,0xF9,0x78,0x18,0xEF, -0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33,0xFD, -0xEC,0x33,0xFC,0xEB,0x33,0xFB,0x10,0xD7, -0x03,0x99,0x40,0x04,0xEB,0x99,0xFB,0x0F, -0xD8,0xE5,0xE4,0xF9,0xFA,0x22,0x78,0x18, -0xEF,0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33, -0xFD,0xEC,0x33,0xFC,0xC9,0x33,0xC9,0x10, -0xD7,0x05,0x9B,0xE9,0x9A,0x40,0x07,0xEC, -0x9B,0xFC,0xE9,0x9A,0xF9,0x0F,0xD8,0xE0, -0xE4,0xC9,0xFA,0xE4,0xCC,0xFB,0x22,0x75, -0xF0,0x10,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xED,0x33,0xFD,0xCC,0x33,0xCC,0xC8,0x33, -0xC8,0x10,0xD7,0x07,0x9B,0xEC,0x9A,0xE8, -0x99,0x40,0x0A,0xED,0x9B,0xFD,0xEC,0x9A, -0xFC,0xE8,0x99,0xF8,0x0F,0xD5,0xF0,0xDA, -0xE4,0xCD,0xFB,0xE4,0xCC,0xFA,0xE4,0xC8, -0xF9,0x22,0xEB,0x9F,0xF5,0xF0,0xEA,0x9E, -0x42,0xF0,0xE9,0x9D,0x42,0xF0,0xE8,0x9C, -0x45,0xF0,0x22,0xE0,0xFC,0xA3,0xE0,0xFD, -0xA3,0xE0,0xFE,0xA3,0xE0,0xFF,0x22,0xE0, -0xF8,0xA3,0xE0,0xF9,0xA3,0xE0,0xFA,0xA3, -0xE0,0xFB,0x22,0xEC,0xF0,0xA3,0xED,0xF0, -0xA3,0xEE,0xF0,0xA3,0xEF,0xF0,0x22,0x7D, -0xD7,0x7C,0x04,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x80,0x7C,0x04,0x7F,0x01, -0x7E,0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C, -0x00,0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0x94,0x7C,0xF9,0x7F,0x02,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0x81,0x7C,0x04,0x7F, -0x01,0x7E,0x66,0x12,0x07,0xA5,0x7D,0xC0, -0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0xA2,0x7C,0x31,0x7F,0x02,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0x82,0x7C,0x04, -0x7F,0x01,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x60,0x7C,0x69,0x7F,0x02, -0x7E,0x66,0x12,0x07,0xA5,0x7D,0x83,0x7C, -0x04,0x7F,0x01,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0x28,0x7C,0x97,0x7F, -0x02,0x7E,0x66,0x12,0x07,0xA5,0x7D,0x84, -0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0x85,0x7C,0x9D, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x23,0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xA5,0x7D,0x10,0x7C, -0xD8,0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0x24,0x7C,0x04,0x7F,0x01,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x07,0xA5,0x7D,0x00, -0x7C,0x04,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x2F,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x02,0x07,0xA5,0x7D, -0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E, -0x66,0x12,0x07,0x60,0xEF,0x44,0x40,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E, -0x66,0x12,0x07,0x60,0xEF,0x54,0xBF,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0xE4, -0xFD,0xFC,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E,0x66, -0x12,0x07,0x60,0xEF,0x54,0xFD,0x54,0xFE, -0xFD,0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xA5,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0xE4, -0xFD,0xFC,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E,0x66, -0x12,0x07,0x60,0xEF,0x44,0x02,0x44,0x01, -0xFD,0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xA5,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x02,0x07,0xA5,0xE4, -0x90,0x06,0x2C,0xF0,0xFD,0x7C,0x01,0x7F, -0x3F,0x7E,0x1D,0x12,0x07,0xA5,0x7D,0x40, -0x7C,0x00,0x7F,0x36,0x7E,0x13,0x12,0x07, -0xA5,0xE4,0xFF,0xFE,0xFD,0x80,0x25,0xE4, -0x7F,0xFF,0x7E,0xFF,0xFD,0xFC,0x90,0x06, -0x24,0x12,0x01,0x0F,0xC3,0x12,0x00,0xF2, -0x50,0x1B,0x90,0x06,0x24,0x12,0x01,0x03, -0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE,0xE4, -0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06,0x24, -0x12,0x01,0x1B,0x80,0xD2,0xE4,0xF5,0xA8, -0xD2,0xAF,0x7D,0x1F,0xFC,0x7F,0x49,0x7E, -0x13,0x12,0x07,0xA5,0x12,0x07,0xD5,0x12, -0x01,0x27,0x12,0x06,0x9F,0x7D,0x41,0x7C, -0x00,0x7F,0x36,0x7E,0x13,0x12,0x07,0xA5, -0xE4,0xFF,0xFE,0xFD,0x80,0x26,0x7F,0xFF, -0x7E,0xFF,0x7D,0x05,0x7C,0x00,0x90,0x06, -0x24,0x12,0x01,0x0F,0xC3,0x12,0x00,0xF2, -0x50,0x1B,0x90,0x06,0x24,0x12,0x01,0x03, -0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE,0xE4, -0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06,0x24, -0x12,0x01,0x1B,0x80,0xD1,0xC2,0x00,0xC2, -0x01,0xD2,0xA9,0xD2,0x8C,0x7F,0x01,0x7E, -0x62,0x12,0x07,0x60,0xEF,0x30,0xE2,0x07, -0xE4,0x90,0x06,0x2C,0xF0,0x80,0xEE,0x90, -0x06,0x2C,0xE0,0x70,0x12,0x12,0x04,0xEA, -0x90,0x06,0x2C,0x74,0x01,0xF0,0xE4,0x90, -0x06,0x33,0xF0,0xA3,0xF0,0x80,0xD6,0xC3, -0x90,0x06,0x34,0xE0,0x94,0x62,0x90,0x06, -0x33,0xE0,0x94,0x00,0x40,0xC7,0xE4,0xF0, -0xA3,0xF0,0x12,0x04,0xEA,0x90,0x06,0x2C, -0x74,0x01,0xF0,0x80,0xB8,0x75,0x0F,0x80, -0x75,0x0E,0x7E,0x75,0x0D,0xAA,0x75,0x0C, -0x83,0xE4,0xF5,0x10,0x7F,0x36,0x7E,0x13, -0x12,0x07,0x60,0xEE,0xC4,0xF8,0x54,0xF0, -0xC8,0xEF,0xC4,0x54,0x0F,0x48,0x54,0x07, -0xFB,0x7A,0x00,0xEA,0x70,0x4A,0xEB,0x14, -0x60,0x1C,0x14,0x60,0x27,0x24,0xFE,0x60, -0x31,0x14,0x60,0x3C,0x24,0x05,0x70,0x38, -0x75,0x0B,0x00,0x75,0x0A,0xC2,0x75,0x09, -0xEB,0x75,0x08,0x0B,0x80,0x36,0x75,0x0B, -0x40,0x75,0x0A,0x59,0x75,0x09,0x73,0x75, -0x08,0x07,0x80,0x28,0x75,0x0B,0x00,0x75, -0x0A,0xE1,0x75,0x09,0xF5,0x75,0x08,0x05, -0x80,0x1A,0x75,0x0B,0xA0,0x75,0x0A,0xAC, -0x75,0x09,0xB9,0x75,0x08,0x03,0x80,0x0C, -0x75,0x0B,0x00,0x75,0x0A,0x62,0x75,0x09, -0x3D,0x75,0x08,0x01,0x75,0x89,0x11,0xE4, -0x7B,0x60,0x7A,0x09,0xF9,0xF8,0xAF,0x0B, -0xAE,0x0A,0xAD,0x09,0xAC,0x08,0x12,0x00, -0x60,0xAA,0x06,0xAB,0x07,0xC3,0xE4,0x9B, -0xFB,0xE4,0x9A,0xFA,0x78,0x17,0xF6,0xAF, -0x03,0xEF,0x08,0xF6,0x18,0xE6,0xF5,0x8C, -0x08,0xE6,0xF5,0x8A,0x74,0x0D,0x2B,0xFB, -0xE4,0x3A,0x18,0xF6,0xAF,0x03,0xEF,0x08, -0xF6,0x75,0x88,0x10,0x53,0x8E,0xC7,0xD2, -0xA9,0x22,0x7F,0x10,0x7E,0x13,0x12,0x07, -0x60,0x90,0x06,0x2D,0xEE,0xF0,0xA3,0xEF, -0xF0,0xEE,0x44,0x10,0xFE,0x90,0x06,0x2D, -0xF0,0xA3,0xEF,0xF0,0x54,0xEF,0xFF,0x90, -0x06,0x2D,0xEE,0xF0,0xFC,0xA3,0xEF,0xF0, -0xFD,0x7F,0x10,0x7E,0x13,0x12,0x07,0xA5, -0xE4,0xFF,0xFE,0x0F,0xBF,0x00,0x01,0x0E, -0xEF,0x64,0x64,0x4E,0x70,0xF5,0x7D,0x04, -0x7C,0x00,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x00,0x7C,0x04,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0xE4, -0xFD,0xFC,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x00,0x7C,0x04,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0x7F, -0x10,0x7E,0x13,0x12,0x07,0x60,0x90,0x06, -0x2D,0xEE,0xF0,0xA3,0xEF,0xF0,0xEE,0x54, -0xEF,0x90,0x06,0x2D,0xF0,0xFC,0xA3,0xEF, -0xF0,0xFD,0x7F,0x10,0x7E,0x13,0x02,0x07, -0xA5,0x78,0x7F,0xE4,0xF6,0xD8,0xFD,0x75, -0x81,0x3C,0x02,0x05,0xD0,0x02,0x03,0x2F, -0xE4,0x93,0xA3,0xF8,0xE4,0x93,0xA3,0x40, -0x03,0xF6,0x80,0x01,0xF2,0x08,0xDF,0xF4, -0x80,0x29,0xE4,0x93,0xA3,0xF8,0x54,0x07, -0x24,0x0C,0xC8,0xC3,0x33,0xC4,0x54,0x0F, -0x44,0x20,0xC8,0x83,0x40,0x04,0xF4,0x56, -0x80,0x01,0x46,0xF6,0xDF,0xE4,0x80,0x0B, -0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80, -0x90,0x07,0xE1,0xE4,0x7E,0x01,0x93,0x60, -0xBC,0xA3,0xFF,0x54,0x3F,0x30,0xE5,0x09, -0x54,0x1F,0xFE,0xE4,0x93,0xA3,0x60,0x01, -0x0E,0xCF,0x54,0xC0,0x25,0xE0,0x60,0xA8, -0x40,0xB8,0xE4,0x93,0xA3,0xFA,0xE4,0x93, -0xA3,0xF8,0xE4,0x93,0xA3,0xC8,0xC5,0x82, -0xC8,0xCA,0xC5,0x83,0xCA,0xF0,0xA3,0xC8, -0xC5,0x82,0xC8,0xCA,0xC5,0x83,0xCA,0xDF, -0xE9,0xDE,0xE7,0x80,0xBE,0x7D,0x40,0x7C, -0x17,0x7F,0x11,0x7E,0x1D,0x12,0x07,0xA5, -0x7F,0x41,0x7E,0x1D,0x12,0x07,0x60,0xEF, -0x44,0x20,0x44,0x80,0xFD,0xAC,0x06,0x7F, -0x41,0x7E,0x1D,0x12,0x07,0xA5,0x7D,0xBB, -0x7C,0x15,0x7F,0xEB,0x7E,0x13,0x12,0x07, -0xA5,0x7D,0x07,0x7C,0x00,0x7F,0xE7,0x7E, -0x13,0x12,0x07,0xA5,0x7D,0x40,0x7C,0x11, -0x7F,0x00,0x7E,0x62,0x12,0x07,0xA5,0x02, -0x02,0x2F,0x7D,0xC0,0x7C,0x16,0x7F,0x11, -0x7E,0x1D,0x12,0x07,0xA5,0x7D,0xBB,0x7C, -0x15,0x7F,0xEB,0x7E,0x13,0x12,0x07,0xA5, -0x7D,0x0D,0x7C,0x00,0x7F,0xE7,0x7E,0x13, -0x12,0x07,0xA5,0x7F,0x41,0x7E,0x1D,0x12, -0x07,0x60,0xEF,0x44,0x20,0x44,0x80,0xFD, -0xAC,0x06,0x7F,0x41,0x7E,0x1D,0x12,0x07, -0xA5,0x7D,0x00,0x7C,0x21,0x7F,0x00,0x7E, -0x62,0x12,0x07,0xA5,0x02,0x02,0x2F,0x7D, -0x40,0x7C,0x17,0x7F,0x11,0x7E,0x1D,0x12, -0x07,0xA5,0x7D,0xBB,0x7C,0x15,0x7F,0xEB, -0x7E,0x13,0x12,0x07,0xA5,0x7D,0x0C,0x7C, -0x00,0x7F,0xE7,0x7E,0x13,0x12,0x07,0xA5, -0x7F,0x41,0x7E,0x1D,0x12,0x07,0x60,0xEF, -0x44,0x20,0x44,0x80,0xFD,0xAC,0x06,0x7F, -0x41,0x7E,0x1D,0x12,0x07,0xA5,0x7D,0x40, -0x7C,0x11,0x7F,0x00,0x7E,0x62,0x12,0x07, -0xA5,0x02,0x02,0x2F,0x7D,0x04,0x7C,0x00, -0x7F,0x01,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x80,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x07,0xA5,0x7F,0x02,0x7E,0x66,0x12,0x07, -0x60,0xEF,0x44,0x02,0x44,0x04,0xFD,0xAC, -0x06,0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0x04,0x7C,0x00,0x7F,0x01,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x02,0x07,0xA5,0xC0,0xE0, -0xC0,0xF0,0xC0,0x83,0xC0,0x82,0xC0,0xD0, -0x75,0xD0,0x00,0xC0,0x00,0x78,0x17,0xE6, -0xF5,0x8C,0x78,0x18,0xE6,0xF5,0x8A,0x90, -0x06,0x31,0xE4,0x75,0xF0,0x01,0x12,0x00, -0x0E,0x90,0x06,0x33,0xE4,0x75,0xF0,0x01, -0x12,0x00,0x0E,0xD0,0x00,0xD0,0xD0,0xD0, -0x82,0xD0,0x83,0xD0,0xF0,0xD0,0xE0,0x32, -0xC2,0xAF,0xAD,0x07,0xAC,0x06,0x8C,0xA2, -0x8D,0xA3,0x75,0xA0,0x01,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0xAE,0xA1,0xBE,0x00,0xF0,0xAE,0xA6,0xAF, -0xA7,0xD2,0xAF,0x22,0x7D,0x20,0x7C,0x0F, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x01,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x02,0x07,0xA5,0xC2,0xAF,0xAB, -0x07,0xAA,0x06,0x8A,0xA2,0x8B,0xA3,0x8C, -0xA4,0x8D,0xA5,0x75,0xA0,0x03,0x00,0x00, -0x00,0xAA,0xA1,0xBA,0x00,0xF8,0xD2,0xAF, -0x22,0x7F,0x0C,0x7E,0x13,0x12,0x07,0x60, -0xEF,0x44,0x50,0xFD,0xAC,0x06,0x7F,0x0C, -0x7E,0x13,0x02,0x07,0xA5,0x12,0x07,0xC1, -0x12,0x07,0xEC,0x12,0x04,0x25,0x02,0x00, -0x03,0x42,0x06,0x33,0x00,0x00,0x42,0x06, -0x31,0x00,0x00,0x00,0xE4,0xF5,0x8E,0x22,}; - -#define FIBER2_100M_INIT_SIZE 2032 -rtk_uint8 Fiber2_100M[FIBER2_100M_INIT_SIZE] = { -0x02,0x05,0x89,0xE4,0xF5,0xA8,0xD2,0xAF, -0x22,0x00,0x00,0x02,0x07,0x26,0xC5,0xF0, -0xF8,0xA3,0xE0,0x28,0xF0,0xC5,0xF0,0xF8, -0xE5,0x82,0x15,0x82,0x70,0x02,0x15,0x83, -0xE0,0x38,0xF0,0x22,0x75,0xF0,0x08,0x75, -0x82,0x00,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xCD,0x33,0xCD,0xCC,0x33,0xCC,0xC5,0x82, -0x33,0xC5,0x82,0x9B,0xED,0x9A,0xEC,0x99, -0xE5,0x82,0x98,0x40,0x0C,0xF5,0x82,0xEE, -0x9B,0xFE,0xED,0x9A,0xFD,0xEC,0x99,0xFC, -0x0F,0xD5,0xF0,0xD6,0xE4,0xCE,0xFB,0xE4, -0xCD,0xFA,0xE4,0xCC,0xF9,0xA8,0x82,0x22, -0xB8,0x00,0xC1,0xB9,0x00,0x59,0xBA,0x00, -0x2D,0xEC,0x8B,0xF0,0x84,0xCF,0xCE,0xCD, -0xFC,0xE5,0xF0,0xCB,0xF9,0x78,0x18,0xEF, -0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33,0xFD, -0xEC,0x33,0xFC,0xEB,0x33,0xFB,0x10,0xD7, -0x03,0x99,0x40,0x04,0xEB,0x99,0xFB,0x0F, -0xD8,0xE5,0xE4,0xF9,0xFA,0x22,0x78,0x18, -0xEF,0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33, -0xFD,0xEC,0x33,0xFC,0xC9,0x33,0xC9,0x10, -0xD7,0x05,0x9B,0xE9,0x9A,0x40,0x07,0xEC, -0x9B,0xFC,0xE9,0x9A,0xF9,0x0F,0xD8,0xE0, -0xE4,0xC9,0xFA,0xE4,0xCC,0xFB,0x22,0x75, -0xF0,0x10,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xED,0x33,0xFD,0xCC,0x33,0xCC,0xC8,0x33, -0xC8,0x10,0xD7,0x07,0x9B,0xEC,0x9A,0xE8, -0x99,0x40,0x0A,0xED,0x9B,0xFD,0xEC,0x9A, -0xFC,0xE8,0x99,0xF8,0x0F,0xD5,0xF0,0xDA, -0xE4,0xCD,0xFB,0xE4,0xCC,0xFA,0xE4,0xC8, -0xF9,0x22,0xEB,0x9F,0xF5,0xF0,0xEA,0x9E, -0x42,0xF0,0xE9,0x9D,0x42,0xF0,0xE8,0x9C, -0x45,0xF0,0x22,0xE0,0xFC,0xA3,0xE0,0xFD, -0xA3,0xE0,0xFE,0xA3,0xE0,0xFF,0x22,0xE0, -0xF8,0xA3,0xE0,0xF9,0xA3,0xE0,0xFA,0xA3, -0xE0,0xFB,0x22,0xEC,0xF0,0xA3,0xED,0xF0, -0xA3,0xEE,0xF0,0xA3,0xEF,0xF0,0x22,0x7D, -0xD7,0x7C,0x04,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x80,0x7C,0x04,0x7F,0x01, -0x7E,0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C, -0x00,0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0x94,0x7C,0xF9,0x7F,0x02,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0x81,0x7C,0x04,0x7F, -0x01,0x7E,0x66,0x12,0x07,0xA5,0x7D,0xC0, -0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0xA2,0x7C,0x31,0x7F,0x02,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0x82,0x7C,0x04, -0x7F,0x01,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x60,0x7C,0x69,0x7F,0x02, -0x7E,0x66,0x12,0x07,0xA5,0x7D,0x83,0x7C, -0x04,0x7F,0x01,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0x28,0x7C,0x97,0x7F, -0x02,0x7E,0x66,0x12,0x07,0xA5,0x7D,0x84, -0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0xC0,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0x85,0x7C,0x9D, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x23,0x7C,0x04,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xA5,0x7D,0x10,0x7C, -0xD8,0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0x24,0x7C,0x04,0x7F,0x01,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x07,0xA5,0x7D,0x00, -0x7C,0x04,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x2F,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x02,0x07,0xA5,0x7D, -0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E, -0x66,0x12,0x07,0x60,0xEF,0x44,0x40,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x03,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E, -0x66,0x12,0x07,0x60,0xEF,0x54,0xBF,0xFD, -0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0xE4, -0xFD,0xFC,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E,0x66, -0x12,0x07,0x60,0xEF,0x54,0xFD,0x54,0xFE, -0xFD,0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xA5,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0xE4, -0xFD,0xFC,0x7F,0x01,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x80,0x7C,0x00,0x7F,0x00,0x7E, -0x66,0x12,0x07,0xA5,0x7F,0x02,0x7E,0x66, -0x12,0x07,0x60,0xEF,0x44,0x02,0x44,0x01, -0xFD,0xAC,0x06,0x7F,0x02,0x7E,0x66,0x12, -0x07,0xA5,0xE4,0xFD,0xFC,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x02,0x07,0xA5,0xE4, -0x90,0x06,0x2C,0xF0,0xFD,0x7C,0x01,0x7F, -0x3F,0x7E,0x1D,0x12,0x07,0xA5,0x7D,0x40, -0x7C,0x00,0x7F,0x36,0x7E,0x13,0x12,0x07, -0xA5,0xE4,0xFF,0xFE,0xFD,0x80,0x25,0xE4, -0x7F,0xFF,0x7E,0xFF,0xFD,0xFC,0x90,0x06, -0x24,0x12,0x01,0x0F,0xC3,0x12,0x00,0xF2, -0x50,0x1B,0x90,0x06,0x24,0x12,0x01,0x03, -0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE,0xE4, -0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06,0x24, -0x12,0x01,0x1B,0x80,0xD2,0xE4,0xF5,0xA8, -0xD2,0xAF,0x7D,0x1F,0xFC,0x7F,0x49,0x7E, -0x13,0x12,0x07,0xA5,0x12,0x07,0xD5,0x12, -0x01,0x27,0x12,0x06,0x5A,0x7D,0x41,0x7C, -0x00,0x7F,0x36,0x7E,0x13,0x12,0x07,0xA5, -0xE4,0xFF,0xFE,0xFD,0x80,0x26,0x7F,0xFF, -0x7E,0xFF,0x7D,0x05,0x7C,0x00,0x90,0x06, -0x24,0x12,0x01,0x0F,0xC3,0x12,0x00,0xF2, -0x50,0x1B,0x90,0x06,0x24,0x12,0x01,0x03, -0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE,0xE4, -0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06,0x24, -0x12,0x01,0x1B,0x80,0xD1,0xC2,0x00,0xC2, -0x01,0xD2,0xA9,0xD2,0x8C,0x7F,0x01,0x7E, -0x62,0x12,0x07,0x60,0xEF,0x30,0xE2,0x07, -0xE4,0x90,0x06,0x2C,0xF0,0x80,0xEE,0x90, -0x06,0x2C,0xE0,0x70,0x12,0x12,0x04,0xEA, -0x90,0x06,0x2C,0x74,0x01,0xF0,0xE4,0x90, -0x06,0x33,0xF0,0xA3,0xF0,0x80,0xD6,0xC3, -0x90,0x06,0x34,0xE0,0x94,0x62,0x90,0x06, -0x33,0xE0,0x94,0x00,0x40,0xC7,0xE4,0xF0, -0xA3,0xF0,0x12,0x04,0xEA,0x90,0x06,0x2C, -0x74,0x01,0xF0,0x80,0xB8,0x75,0x0F,0x80, -0x75,0x0E,0x7E,0x75,0x0D,0xAA,0x75,0x0C, -0x83,0xE4,0xF5,0x10,0x7F,0x36,0x7E,0x13, -0x12,0x07,0x60,0xEE,0xC4,0xF8,0x54,0xF0, -0xC8,0xEF,0xC4,0x54,0x0F,0x48,0x54,0x07, -0xFB,0x7A,0x00,0xEA,0x70,0x4A,0xEB,0x14, -0x60,0x1C,0x14,0x60,0x27,0x24,0xFE,0x60, -0x31,0x14,0x60,0x3C,0x24,0x05,0x70,0x38, -0x75,0x0B,0x00,0x75,0x0A,0xC2,0x75,0x09, -0xEB,0x75,0x08,0x0B,0x80,0x36,0x75,0x0B, -0x40,0x75,0x0A,0x59,0x75,0x09,0x73,0x75, -0x08,0x07,0x80,0x28,0x75,0x0B,0x00,0x75, -0x0A,0xE1,0x75,0x09,0xF5,0x75,0x08,0x05, -0x80,0x1A,0x75,0x0B,0xA0,0x75,0x0A,0xAC, -0x75,0x09,0xB9,0x75,0x08,0x03,0x80,0x0C, -0x75,0x0B,0x00,0x75,0x0A,0x62,0x75,0x09, -0x3D,0x75,0x08,0x01,0x75,0x89,0x11,0xE4, -0x7B,0x60,0x7A,0x09,0xF9,0xF8,0xAF,0x0B, -0xAE,0x0A,0xAD,0x09,0xAC,0x08,0x12,0x00, -0x60,0xAA,0x06,0xAB,0x07,0xC3,0xE4,0x9B, -0xFB,0xE4,0x9A,0xFA,0x78,0x17,0xF6,0xAF, -0x03,0xEF,0x08,0xF6,0x18,0xE6,0xF5,0x8C, -0x08,0xE6,0xF5,0x8A,0x74,0x0D,0x2B,0xFB, -0xE4,0x3A,0x18,0xF6,0xAF,0x03,0xEF,0x08, -0xF6,0x75,0x88,0x10,0x53,0x8E,0xC7,0xD2, -0xA9,0x22,0x7F,0x10,0x7E,0x13,0x12,0x07, -0x60,0x90,0x06,0x2D,0xEE,0xF0,0xA3,0xEF, -0xF0,0xEE,0x44,0x10,0xFE,0x90,0x06,0x2D, -0xF0,0xA3,0xEF,0xF0,0x54,0xEF,0xFF,0x90, -0x06,0x2D,0xEE,0xF0,0xFC,0xA3,0xEF,0xF0, -0xFD,0x7F,0x10,0x7E,0x13,0x12,0x07,0xA5, -0xE4,0xFF,0xFE,0x0F,0xBF,0x00,0x01,0x0E, -0xEF,0x64,0x64,0x4E,0x70,0xF5,0x7D,0x04, -0x7C,0x00,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x00,0x7C,0x04,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0xE4, -0xFD,0xFC,0x7F,0x02,0x7E,0x66,0x12,0x07, -0xA5,0x7D,0x00,0x7C,0x04,0x7F,0x01,0x7E, -0x66,0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x07,0xA5,0x7F, -0x10,0x7E,0x13,0x12,0x07,0x60,0x90,0x06, -0x2D,0xEE,0xF0,0xA3,0xEF,0xF0,0xEE,0x54, -0xEF,0x90,0x06,0x2D,0xF0,0xFC,0xA3,0xEF, -0xF0,0xFD,0x7F,0x10,0x7E,0x13,0x02,0x07, -0xA5,0x78,0x7F,0xE4,0xF6,0xD8,0xFD,0x75, -0x81,0x3C,0x02,0x05,0xD0,0x02,0x03,0x2F, -0xE4,0x93,0xA3,0xF8,0xE4,0x93,0xA3,0x40, -0x03,0xF6,0x80,0x01,0xF2,0x08,0xDF,0xF4, -0x80,0x29,0xE4,0x93,0xA3,0xF8,0x54,0x07, -0x24,0x0C,0xC8,0xC3,0x33,0xC4,0x54,0x0F, -0x44,0x20,0xC8,0x83,0x40,0x04,0xF4,0x56, -0x80,0x01,0x46,0xF6,0xDF,0xE4,0x80,0x0B, -0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80, -0x90,0x07,0xE1,0xE4,0x7E,0x01,0x93,0x60, -0xBC,0xA3,0xFF,0x54,0x3F,0x30,0xE5,0x09, -0x54,0x1F,0xFE,0xE4,0x93,0xA3,0x60,0x01, -0x0E,0xCF,0x54,0xC0,0x25,0xE0,0x60,0xA8, -0x40,0xB8,0xE4,0x93,0xA3,0xFA,0xE4,0x93, -0xA3,0xF8,0xE4,0x93,0xA3,0xC8,0xC5,0x82, -0xC8,0xCA,0xC5,0x83,0xCA,0xF0,0xA3,0xC8, -0xC5,0x82,0xC8,0xCA,0xC5,0x83,0xCA,0xDF, -0xE9,0xDE,0xE7,0x80,0xBE,0x7D,0x40,0x7C, -0x17,0x7F,0x11,0x7E,0x1D,0x12,0x07,0xA5, -0x7F,0x41,0x7E,0x1D,0x12,0x07,0x60,0xEF, -0x44,0x20,0x44,0x80,0xFD,0xAC,0x06,0x7F, -0x41,0x7E,0x1D,0x12,0x07,0xA5,0x7D,0xBB, -0x7C,0x15,0x7F,0xEB,0x7E,0x13,0x12,0x07, -0xA5,0x7D,0x07,0x7C,0x00,0x7F,0xE7,0x7E, -0x13,0x12,0x07,0xA5,0x7D,0x40,0x7C,0x11, -0x7F,0x00,0x7E,0x62,0x12,0x07,0xA5,0x02, -0x02,0x2F,0x7D,0xC0,0x7C,0x16,0x7F,0x11, -0x7E,0x1D,0x12,0x07,0xA5,0x7D,0xBB,0x7C, -0x15,0x7F,0xEB,0x7E,0x13,0x12,0x07,0xA5, -0x7D,0x0D,0x7C,0x00,0x7F,0xE7,0x7E,0x13, -0x12,0x07,0xA5,0x7F,0x41,0x7E,0x1D,0x12, -0x07,0x60,0xEF,0x44,0x20,0x44,0x80,0xFD, -0xAC,0x06,0x7F,0x41,0x7E,0x1D,0x12,0x07, -0xA5,0x7D,0x00,0x7C,0x21,0x7F,0x00,0x7E, -0x62,0x12,0x07,0xA5,0x02,0x02,0x2F,0x7D, -0x40,0x7C,0x17,0x7F,0x11,0x7E,0x1D,0x12, -0x07,0xA5,0x7D,0xBB,0x7C,0x15,0x7F,0xEB, -0x7E,0x13,0x12,0x07,0xA5,0x7D,0x0C,0x7C, -0x00,0x7F,0xE7,0x7E,0x13,0x12,0x07,0xA5, -0x7F,0x41,0x7E,0x1D,0x12,0x07,0x60,0xEF, -0x44,0x20,0x44,0x80,0xFD,0xAC,0x06,0x7F, -0x41,0x7E,0x1D,0x12,0x07,0xA5,0x7D,0x40, -0x7C,0x11,0x7F,0x00,0x7E,0x62,0x12,0x07, -0xA5,0x02,0x02,0x2F,0x7D,0x04,0x7C,0x00, -0x7F,0x01,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x80,0x7C,0x00,0x7F,0x00,0x7E,0x66,0x12, -0x07,0xA5,0x7F,0x02,0x7E,0x66,0x12,0x07, -0x60,0xEF,0x44,0x02,0x44,0x04,0xFD,0xAC, -0x06,0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5, -0x7D,0x04,0x7C,0x00,0x7F,0x01,0x7E,0x66, -0x12,0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x02,0x07,0xA5,0xC0,0xE0, -0xC0,0xF0,0xC0,0x83,0xC0,0x82,0xC0,0xD0, -0x75,0xD0,0x00,0xC0,0x00,0x78,0x17,0xE6, -0xF5,0x8C,0x78,0x18,0xE6,0xF5,0x8A,0x90, -0x06,0x31,0xE4,0x75,0xF0,0x01,0x12,0x00, -0x0E,0x90,0x06,0x33,0xE4,0x75,0xF0,0x01, -0x12,0x00,0x0E,0xD0,0x00,0xD0,0xD0,0xD0, -0x82,0xD0,0x83,0xD0,0xF0,0xD0,0xE0,0x32, -0xC2,0xAF,0xAD,0x07,0xAC,0x06,0x8C,0xA2, -0x8D,0xA3,0x75,0xA0,0x01,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, -0xAE,0xA1,0xBE,0x00,0xF0,0xAE,0xA6,0xAF, -0xA7,0xD2,0xAF,0x22,0x7D,0x20,0x7C,0x0F, -0x7F,0x02,0x7E,0x66,0x12,0x07,0xA5,0x7D, -0x01,0x7C,0x00,0x7F,0x01,0x7E,0x66,0x12, -0x07,0xA5,0x7D,0xC0,0x7C,0x00,0x7F,0x00, -0x7E,0x66,0x02,0x07,0xA5,0xC2,0xAF,0xAB, -0x07,0xAA,0x06,0x8A,0xA2,0x8B,0xA3,0x8C, -0xA4,0x8D,0xA5,0x75,0xA0,0x03,0x00,0x00, -0x00,0xAA,0xA1,0xBA,0x00,0xF8,0xD2,0xAF, -0x22,0x7F,0x0C,0x7E,0x13,0x12,0x07,0x60, -0xEF,0x44,0x50,0xFD,0xAC,0x06,0x7F,0x0C, -0x7E,0x13,0x02,0x07,0xA5,0x12,0x07,0xC1, -0x12,0x07,0xEC,0x12,0x04,0x25,0x02,0x00, -0x03,0x42,0x06,0x33,0x00,0x00,0x42,0x06, -0x31,0x00,0x00,0x00,0xE4,0xF5,0x8E,0x22,}; - - -#define SGMII_INIT_SIZE 1183 -rtk_uint8 Sgmii_Init[SGMII_INIT_SIZE] = { -0x02,0x03,0x81,0xE4,0xF5,0xA8,0xD2,0xAF, -0x22,0x00,0x00,0x02,0x04,0x0D,0xC5,0xF0, -0xF8,0xA3,0xE0,0x28,0xF0,0xC5,0xF0,0xF8, -0xE5,0x82,0x15,0x82,0x70,0x02,0x15,0x83, -0xE0,0x38,0xF0,0x22,0x75,0xF0,0x08,0x75, -0x82,0x00,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xCD,0x33,0xCD,0xCC,0x33,0xCC,0xC5,0x82, -0x33,0xC5,0x82,0x9B,0xED,0x9A,0xEC,0x99, -0xE5,0x82,0x98,0x40,0x0C,0xF5,0x82,0xEE, -0x9B,0xFE,0xED,0x9A,0xFD,0xEC,0x99,0xFC, -0x0F,0xD5,0xF0,0xD6,0xE4,0xCE,0xFB,0xE4, -0xCD,0xFA,0xE4,0xCC,0xF9,0xA8,0x82,0x22, -0xB8,0x00,0xC1,0xB9,0x00,0x59,0xBA,0x00, -0x2D,0xEC,0x8B,0xF0,0x84,0xCF,0xCE,0xCD, -0xFC,0xE5,0xF0,0xCB,0xF9,0x78,0x18,0xEF, -0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33,0xFD, -0xEC,0x33,0xFC,0xEB,0x33,0xFB,0x10,0xD7, -0x03,0x99,0x40,0x04,0xEB,0x99,0xFB,0x0F, -0xD8,0xE5,0xE4,0xF9,0xFA,0x22,0x78,0x18, -0xEF,0x2F,0xFF,0xEE,0x33,0xFE,0xED,0x33, -0xFD,0xEC,0x33,0xFC,0xC9,0x33,0xC9,0x10, -0xD7,0x05,0x9B,0xE9,0x9A,0x40,0x07,0xEC, -0x9B,0xFC,0xE9,0x9A,0xF9,0x0F,0xD8,0xE0, -0xE4,0xC9,0xFA,0xE4,0xCC,0xFB,0x22,0x75, -0xF0,0x10,0xEF,0x2F,0xFF,0xEE,0x33,0xFE, -0xED,0x33,0xFD,0xCC,0x33,0xCC,0xC8,0x33, -0xC8,0x10,0xD7,0x07,0x9B,0xEC,0x9A,0xE8, -0x99,0x40,0x0A,0xED,0x9B,0xFD,0xEC,0x9A, -0xFC,0xE8,0x99,0xF8,0x0F,0xD5,0xF0,0xDA, -0xE4,0xCD,0xFB,0xE4,0xCC,0xFA,0xE4,0xC8, -0xF9,0x22,0xEB,0x9F,0xF5,0xF0,0xEA,0x9E, -0x42,0xF0,0xE9,0x9D,0x42,0xF0,0xE8,0x9C, -0x45,0xF0,0x22,0xE0,0xFC,0xA3,0xE0,0xFD, -0xA3,0xE0,0xFE,0xA3,0xE0,0xFF,0x22,0xE0, -0xF8,0xA3,0xE0,0xF9,0xA3,0xE0,0xFA,0xA3, -0xE0,0xFB,0x22,0xEC,0xF0,0xA3,0xED,0xF0, -0xA3,0xEE,0xF0,0xA3,0xEF,0xF0,0x22,0xE4, -0x90,0x06,0x2C,0xF0,0xFD,0x7C,0x01,0x7F, -0x3F,0x7E,0x1D,0x12,0x04,0x6B,0x7D,0x40, -0x7C,0x00,0x7F,0x36,0x7E,0x13,0x12,0x04, -0x6B,0xE4,0xFF,0xFE,0xFD,0x80,0x25,0xE4, -0x7F,0xFF,0x7E,0xFF,0xFD,0xFC,0x90,0x06, -0x24,0x12,0x01,0x0F,0xC3,0x12,0x00,0xF2, -0x50,0x1B,0x90,0x06,0x24,0x12,0x01,0x03, -0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE,0xE4, -0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06,0x24, -0x12,0x01,0x1B,0x80,0xD2,0xE4,0xF5,0xA8, -0xD2,0xAF,0x7D,0x1F,0xFC,0x7F,0x49,0x7E, -0x13,0x12,0x04,0x6B,0x12,0x04,0x92,0x7D, -0x41,0x7C,0x00,0x7F,0x36,0x7E,0x13,0x12, -0x04,0x6B,0xE4,0xFF,0xFE,0xFD,0x80,0x25, -0xE4,0x7F,0x20,0x7E,0x4E,0xFD,0xFC,0x90, -0x06,0x24,0x12,0x01,0x0F,0xC3,0x12,0x00, -0xF2,0x50,0x1B,0x90,0x06,0x24,0x12,0x01, -0x03,0xEF,0x24,0x01,0xFF,0xE4,0x3E,0xFE, -0xE4,0x3D,0xFD,0xE4,0x3C,0xFC,0x90,0x06, -0x24,0x12,0x01,0x1B,0x80,0xD2,0xC2,0x00, -0xC2,0x01,0xD2,0xA9,0xD2,0x8C,0x7F,0x01, -0x7E,0x62,0x12,0x04,0x47,0xEF,0x30,0xE2, -0x07,0xE4,0x90,0x06,0x2C,0xF0,0x80,0xEE, -0x90,0x06,0x2C,0xE0,0x70,0x12,0x12,0x02, -0xDB,0x90,0x06,0x2C,0x74,0x01,0xF0,0xE4, -0x90,0x06,0x2F,0xF0,0xA3,0xF0,0x80,0xD6, -0xC3,0x90,0x06,0x30,0xE0,0x94,0x62,0x90, -0x06,0x2F,0xE0,0x94,0x00,0x40,0xC7,0xE4, -0xF0,0xA3,0xF0,0x12,0x02,0xDB,0x90,0x06, -0x2C,0x74,0x01,0xF0,0x80,0xB8,0x75,0x0F, -0x80,0x75,0x0E,0x7E,0x75,0x0D,0xAA,0x75, -0x0C,0x83,0xE4,0xF5,0x10,0x7F,0x36,0x7E, -0x13,0x12,0x04,0x47,0xEE,0xC4,0xF8,0x54, -0xF0,0xC8,0xEF,0xC4,0x54,0x0F,0x48,0x54, -0x07,0xFB,0x7A,0x00,0xEA,0x70,0x4A,0xEB, -0x14,0x60,0x1C,0x14,0x60,0x27,0x24,0xFE, -0x60,0x31,0x14,0x60,0x3C,0x24,0x05,0x70, -0x38,0x75,0x0B,0x00,0x75,0x0A,0xC2,0x75, -0x09,0xEB,0x75,0x08,0x0B,0x80,0x36,0x75, -0x0B,0x40,0x75,0x0A,0x59,0x75,0x09,0x73, -0x75,0x08,0x07,0x80,0x28,0x75,0x0B,0x00, -0x75,0x0A,0xE1,0x75,0x09,0xF5,0x75,0x08, -0x05,0x80,0x1A,0x75,0x0B,0xA0,0x75,0x0A, -0xAC,0x75,0x09,0xB9,0x75,0x08,0x03,0x80, -0x0C,0x75,0x0B,0x00,0x75,0x0A,0x62,0x75, -0x09,0x3D,0x75,0x08,0x01,0x75,0x89,0x11, -0xE4,0x7B,0x60,0x7A,0x09,0xF9,0xF8,0xAF, -0x0B,0xAE,0x0A,0xAD,0x09,0xAC,0x08,0x12, -0x00,0x60,0xAA,0x06,0xAB,0x07,0xC3,0xE4, -0x9B,0xFB,0xE4,0x9A,0xFA,0x78,0x17,0xF6, -0xAF,0x03,0xEF,0x08,0xF6,0x18,0xE6,0xF5, -0x8C,0x08,0xE6,0xF5,0x8A,0x74,0x0D,0x2B, -0xFB,0xE4,0x3A,0x18,0xF6,0xAF,0x03,0xEF, -0x08,0xF6,0x75,0x88,0x10,0x53,0x8E,0xC7, -0xD2,0xA9,0x22,0x7D,0x02,0x7C,0x00,0x7F, -0x4A,0x7E,0x13,0x12,0x04,0x6B,0x7D,0x46, -0x7C,0x71,0x7F,0x02,0x7E,0x66,0x12,0x04, -0x6B,0x7D,0x03,0x7C,0x00,0x7F,0x01,0x7E, -0x66,0x12,0x04,0x6B,0x7D,0xC0,0x7C,0x00, -0x7F,0x00,0x7E,0x66,0x12,0x04,0x6B,0xE4, -0xFF,0xFE,0x0F,0xBF,0x00,0x01,0x0E,0xEF, -0x64,0x64,0x4E,0x70,0xF5,0x7D,0x04,0x7C, -0x00,0x7F,0x02,0x7E,0x66,0x12,0x04,0x6B, -0x7D,0x00,0x7C,0x04,0x7F,0x01,0x7E,0x66, -0x12,0x04,0x6B,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x04,0x6B,0xE4,0xFD, -0xFC,0x7F,0x02,0x7E,0x66,0x12,0x04,0x6B, -0x7D,0x00,0x7C,0x04,0x7F,0x01,0x7E,0x66, -0x12,0x04,0x6B,0x7D,0xC0,0x7C,0x00,0x7F, -0x00,0x7E,0x66,0x12,0x04,0x6B,0xE4,0xFD, -0xFC,0x7F,0x4A,0x7E,0x13,0x12,0x04,0x6B, -0x7D,0x06,0x7C,0x71,0x7F,0x02,0x7E,0x66, -0x12,0x04,0x6B,0x7D,0x03,0x7C,0x00,0x7F, -0x01,0x7E,0x66,0x12,0x04,0x6B,0x7D,0xC0, -0x7C,0x00,0x7F,0x00,0x7E,0x66,0x02,0x04, -0x6B,0x78,0x7F,0xE4,0xF6,0xD8,0xFD,0x75, -0x81,0x3C,0x02,0x03,0xC8,0x02,0x01,0x27, -0xE4,0x93,0xA3,0xF8,0xE4,0x93,0xA3,0x40, -0x03,0xF6,0x80,0x01,0xF2,0x08,0xDF,0xF4, -0x80,0x29,0xE4,0x93,0xA3,0xF8,0x54,0x07, -0x24,0x0C,0xC8,0xC3,0x33,0xC4,0x54,0x0F, -0x44,0x20,0xC8,0x83,0x40,0x04,0xF4,0x56, -0x80,0x01,0x46,0xF6,0xDF,0xE4,0x80,0x0B, -0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80, -0x90,0x04,0x87,0xE4,0x7E,0x01,0x93,0x60, -0xBC,0xA3,0xFF,0x54,0x3F,0x30,0xE5,0x09, -0x54,0x1F,0xFE,0xE4,0x93,0xA3,0x60,0x01, -0x0E,0xCF,0x54,0xC0,0x25,0xE0,0x60,0xA8, -0x40,0xB8,0xE4,0x93,0xA3,0xFA,0xE4,0x93, -0xA3,0xF8,0xE4,0x93,0xA3,0xC8,0xC5,0x82, -0xC8,0xCA,0xC5,0x83,0xCA,0xF0,0xA3,0xC8, -0xC5,0x82,0xC8,0xCA,0xC5,0x83,0xCA,0xDF, -0xE9,0xDE,0xE7,0x80,0xBE,0xC0,0xE0,0xC0, -0xF0,0xC0,0x83,0xC0,0x82,0xC0,0xD0,0x75, -0xD0,0x00,0xC0,0x00,0x78,0x17,0xE6,0xF5, -0x8C,0x78,0x18,0xE6,0xF5,0x8A,0x90,0x06, -0x2D,0xE4,0x75,0xF0,0x01,0x12,0x00,0x0E, -0x90,0x06,0x2F,0xE4,0x75,0xF0,0x01,0x12, -0x00,0x0E,0xD0,0x00,0xD0,0xD0,0xD0,0x82, -0xD0,0x83,0xD0,0xF0,0xD0,0xE0,0x32,0xC2, -0xAF,0xAD,0x07,0xAC,0x06,0x8C,0xA2,0x8D, -0xA3,0x75,0xA0,0x01,0x00,0x00,0x00,0x00, -0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xAE, -0xA1,0xBE,0x00,0xF0,0xAE,0xA6,0xAF,0xA7, -0xD2,0xAF,0x22,0xC2,0xAF,0xAB,0x07,0xAA, -0x06,0x8A,0xA2,0x8B,0xA3,0x8C,0xA4,0x8D, -0xA5,0x75,0xA0,0x03,0x00,0x00,0x00,0xAA, -0xA1,0xBA,0x00,0xF8,0xD2,0xAF,0x22,0x42, -0x06,0x2F,0x00,0x00,0x42,0x06,0x2D,0x00, -0x00,0x00,0x12,0x04,0x9B,0x12,0x02,0x16, -0x02,0x00,0x03,0xE4,0xF5,0x8E,0x22,}; - - -/* Function Name: - * rtl8367c_setAsicPortUnknownDaBehavior - * Description: - * Set UNDA behavior - * Input: - * port - port ID - * behavior - 0: flooding to unknwon DA portmask; 1: drop; 2:trap; 3: flooding - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid behavior - * Note: - * None - */ -ret_t rtl8367c_setAsicPortUnknownDaBehavior(rtk_uint32 port, rtk_uint32 behavior) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(behavior >= L2_UNDA_BEHAVE_END) - return RT_ERR_NOT_ALLOWED; - - if(port < 8) - return rtl8367c_setAsicRegBits(RTL8367C_REG_UNKNOWN_UNICAST_DA_PORT_BEHAVE, RTL8367C_Port0_ACTION_MASK << (port * 2), behavior); - else - return rtl8367c_setAsicRegBits(RTL8367C_REG_UNKNOWN_UNICAST_DA_PORT_BEHAVE_EXT, RTL8367C_PORT8_ACTION_MASK << ((port-8) * 2), behavior); -} -/* Function Name: - * rtl8367c_getAsicPortUnknownDaBehavior - * Description: - * Get UNDA behavior - * Input: - * port - port ID - * Output: - * pBehavior - 0: flooding to unknwon DA portmask; 1: drop; 2:trap; 3: flooding - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortUnknownDaBehavior(rtk_uint32 port, rtk_uint32 *pBehavior) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicRegBits(RTL8367C_REG_UNKNOWN_UNICAST_DA_PORT_BEHAVE, RTL8367C_Port0_ACTION_MASK << (port * 2), pBehavior); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_UNKNOWN_UNICAST_DA_PORT_BEHAVE_EXT, RTL8367C_PORT8_ACTION_MASK << ((port-8) * 2), pBehavior); -} -/* Function Name: - * rtl8367c_setAsicPortUnknownSaBehavior - * Description: - * Set UNSA behavior - * Input: - * behavior - 0: flooding; 1: drop; 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid behavior - * Note: - * None - */ -ret_t rtl8367c_setAsicPortUnknownSaBehavior(rtk_uint32 behavior) -{ - if(behavior >= L2_BEHAVE_SA_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_PORT_SECURIT_CTRL_REG, RTL8367C_UNKNOWN_SA_BEHAVE_MASK, behavior); -} -/* Function Name: - * rtl8367c_getAsicPortUnknownSaBehavior - * Description: - * Get UNSA behavior - * Input: - * pBehavior - 0: flooding; 1: drop; 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortUnknownSaBehavior(rtk_uint32 *pBehavior) -{ - return rtl8367c_getAsicRegBits(RTL8367C_PORT_SECURIT_CTRL_REG, RTL8367C_UNKNOWN_SA_BEHAVE_MASK, pBehavior); -} -/* Function Name: - * rtl8367c_setAsicPortUnmatchedSaBehavior - * Description: - * Set Unmatched SA behavior - * Input: - * behavior - 0: flooding; 1: drop; 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid behavior - * Note: - * None - */ -ret_t rtl8367c_setAsicPortUnmatchedSaBehavior(rtk_uint32 behavior) -{ - if(behavior >= L2_BEHAVE_SA_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_PORT_SECURIT_CTRL_REG, RTL8367C_UNMATCHED_SA_BEHAVE_MASK, behavior); -} -/* Function Name: - * rtl8367c_getAsicPortUnmatchedSaBehavior - * Description: - * Get Unmatched SA behavior - * Input: - * pBehavior - 0: flooding; 1: drop; 2:trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortUnmatchedSaBehavior(rtk_uint32 *pBehavior) -{ - return rtl8367c_getAsicRegBits(RTL8367C_PORT_SECURIT_CTRL_REG, RTL8367C_UNMATCHED_SA_BEHAVE_MASK, pBehavior); -} - -/* Function Name: - * rtl8367c_setAsicPortUnmatchedSaMoving - * Description: - * Set Unmatched SA moving state - * Input: - * port - Port ID - * enabled - 0: can't move to new port; 1: can move to new port - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Error Port ID - * Note: - * None - */ -ret_t rtl8367c_setAsicPortUnmatchedSaMoving(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_L2_SA_MOVING_FORBID, port, (enabled == 1) ? 0 : 1); -} - -/* Function Name: - * rtl8367c_getAsicPortUnmatchedSaMoving - * Description: - * Get Unmatched SA moving state - * Input: - * port - Port ID - * Output: - * pEnabled - 0: can't move to new port; 1: can move to new port - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Error Port ID - * Note: - * None - */ -ret_t rtl8367c_getAsicPortUnmatchedSaMoving(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - rtk_uint32 data; - ret_t retVal; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_L2_SA_MOVING_FORBID, port, &data)) != RT_ERR_OK) - return retVal; - - *pEnabled = (data == 1) ? 0 : 1; - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicPortUnknownDaFloodingPortmask - * Description: - * Set UNDA flooding portmask - * Input: - * portmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicPortUnknownDaFloodingPortmask(rtk_uint32 portmask) -{ - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicReg(RTL8367C_UNUCAST_FLOADING_PMSK_REG, portmask); -} -/* Function Name: - * rtl8367c_getAsicPortUnknownDaFloodingPortmask - * Description: - * Get UNDA flooding portmask - * Input: - * pPortmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortUnknownDaFloodingPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_UNUCAST_FLOADING_PMSK_REG, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicPortUnknownMulticastFloodingPortmask - * Description: - * Set UNMC flooding portmask - * Input: - * portmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicPortUnknownMulticastFloodingPortmask(rtk_uint32 portmask) -{ - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicReg(RTL8367C_UNMCAST_FLOADING_PMSK_REG, portmask); -} -/* Function Name: - * rtl8367c_getAsicPortUnknownMulticastFloodingPortmask - * Description: - * Get UNMC flooding portmask - * Input: - * pPortmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortUnknownMulticastFloodingPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_UNMCAST_FLOADING_PMSK_REG, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicPortBcastFloodingPortmask - * Description: - * Set Bcast flooding portmask - * Input: - * portmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicPortBcastFloodingPortmask(rtk_uint32 portmask) -{ - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicReg(RTL8367C_BCAST_FLOADING_PMSK_REG, portmask); -} -/* Function Name: - * rtl8367c_getAsicPortBcastFloodingPortmask - * Description: - * Get Bcast flooding portmask - * Input: - * pPortmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortBcastFloodingPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_BCAST_FLOADING_PMSK_REG, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicPortBlockSpa - * Description: - * Set disabling blocking frame if source port and destination port are the same - * Input: - * port - Physical port number (0~7) - * permit - 0: block; 1: permit - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortBlockSpa(rtk_uint32 port, rtk_uint32 permit) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_SOURCE_PORT_BLOCK_REG, port, permit); -} -/* Function Name: - * rtl8367c_getAsicPortBlockSpa - * Description: - * Get disabling blocking frame if source port and destination port are the same - * Input: - * port - Physical port number (0~7) - * pPermit - 0: block; 1: permit - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortBlockSpa(rtk_uint32 port, rtk_uint32* pPermit) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_SOURCE_PORT_BLOCK_REG, port, pPermit); -} -/* Function Name: - * rtl8367c_setAsicPortDos - * Description: - * Set DOS function - * Input: - * type - DOS type - * drop - 0: permit; 1: drop - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid payload index - * Note: - * None - */ -ret_t rtl8367c_setAsicPortDos(rtk_uint32 type, rtk_uint32 drop) -{ - if(type >= DOS_END) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_DOS_CFG, RTL8367C_DROP_DAEQSA_OFFSET + type, drop); -} -/* Function Name: - * rtl8367c_getAsicPortDos - * Description: - * Get DOS function - * Input: - * type - DOS type - * pDrop - 0: permit; 1: drop - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid payload index - * Note: - * None - */ -ret_t rtl8367c_getAsicPortDos(rtk_uint32 type, rtk_uint32* pDrop) -{ - if(type >= DOS_END) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_DOS_CFG, RTL8367C_DROP_DAEQSA_OFFSET + type,pDrop); -} -/* Function Name: - * rtl8367c_setAsicPortForceLink - * Description: - * Set port force linking configuration - * Input: - * port - Physical port number (0~7) - * pPortAbility - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortForceLink(rtk_uint32 port, rtl8367c_port_ability_t *pPortAbility) -{ - rtk_uint32 regData = 0; - - /* Invalid input parameter */ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - regData |= pPortAbility->forcemode << 12; - regData |= pPortAbility->mstfault << 9; - regData |= pPortAbility->mstmode << 8; - regData |= pPortAbility->nway << 7; - regData |= pPortAbility->txpause << 6; - regData |= pPortAbility->rxpause << 5; - regData |= pPortAbility->link << 4; - regData |= pPortAbility->duplex << 2; - regData |= pPortAbility->speed; - - return rtl8367c_setAsicReg(RTL8367C_REG_MAC0_FORCE_SELECT+port, regData); -} -/* Function Name: - * rtl8367c_getAsicPortForceLink - * Description: - * Get port force linking configuration - * Input: - * port - Physical port number (0~7) - * pPortAbility - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortForceLink(rtk_uint32 port, rtl8367c_port_ability_t *pPortAbility) -{ - ret_t retVal; - rtk_uint32 regData; - - /* Invalid input parameter */ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_MAC0_FORCE_SELECT + port, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pPortAbility->forcemode = (regData >> 12) & 0x0001; - pPortAbility->mstfault = (regData >> 9) & 0x0001; - pPortAbility->mstmode = (regData >> 8) & 0x0001; - pPortAbility->nway = (regData >> 7) & 0x0001; - pPortAbility->txpause = (regData >> 6) & 0x0001; - pPortAbility->rxpause = (regData >> 5) & 0x0001; - pPortAbility->link = (regData >> 4) & 0x0001; - pPortAbility->duplex = (regData >> 2) & 0x0001; - pPortAbility->speed = regData & 0x0003; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicPortStatus - * Description: - * Get port link status - * Input: - * port - Physical port number (0~7) - * pPortAbility - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortStatus(rtk_uint32 port, rtl8367c_port_status_t *pPortStatus) -{ - ret_t retVal; - rtk_uint32 regData; - - /* Invalid input parameter */ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_PORT0_STATUS+port,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pPortStatus->lpi1000 = (regData >> 11) & 0x0001; - pPortStatus->lpi100 = (regData >> 10) & 0x0001; - pPortStatus->mstfault = (regData >> 9) & 0x0001; - pPortStatus->mstmode = (regData >> 8) & 0x0001; - pPortStatus->nway = (regData >> 7) & 0x0001; - pPortStatus->txpause = (regData >> 6) & 0x0001; - pPortStatus->rxpause = (regData >> 5) & 0x0001; - pPortStatus->link = (regData >> 4) & 0x0001; - pPortStatus->duplex = (regData >> 2) & 0x0001; - pPortStatus->speed = regData & 0x0003; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicPortForceLinkExt - * Description: - * Set external interface force linking configuration - * Input: - * id - external interface id (0~2) - * portAbility - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicPortForceLinkExt(rtk_uint32 id, rtl8367c_port_ability_t *pPortAbility) -{ - rtk_uint32 retVal, regValue, regValue2, type, sgmiibit, hisgmiibit; - rtk_uint32 reg_data = 0; - rtk_uint32 i = 0; - - /* Invalid input parameter */ - if(id >= RTL8367C_EXTNO) - return RT_ERR_OUT_OF_RANGE; - - reg_data |= pPortAbility->forcemode << 12; - reg_data |= pPortAbility->mstfault << 9; - reg_data |= pPortAbility->mstmode << 8; - reg_data |= pPortAbility->nway << 7; - reg_data |= pPortAbility->txpause << 6; - reg_data |= pPortAbility->rxpause << 5; - reg_data |= pPortAbility->link << 4; - reg_data |= pPortAbility->duplex << 2; - reg_data |= pPortAbility->speed; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - /*get chip ID */ - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - type = 0; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 1; - break; - case 0x0652: - case 0x6368: - type = 2; - break; - case 0x0801: - case 0x6511: - type = 3; - break; - default: - return RT_ERR_FAILED; - } - - if (1 == type) - { - if(1 == id) - { - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_REG_TO_ECO4, ®Value)) != RT_ERR_OK) - return retVal; - - if((regValue & (0x0001 << 5)) && (regValue & (0x0001 << 7))) - { - return RT_ERR_OK; - } - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - } - - if(0 == id || 1 == id) - return rtl8367c_setAsicReg(RTL8367C_REG_DIGITAL_INTERFACE0_FORCE + id, reg_data); - else - return rtl8367c_setAsicReg(RTL8367C_REG_DIGITAL_INTERFACE2_FORCE, reg_data); - } - else if (2 == type) - { - if (1 == id) - { - if((retVal = rtl8367c_setAsicRegBit(0x1311, 2, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1311, 0x3, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 6, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 5, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 12, pPortAbility->forcemode)) != RT_ERR_OK) - return retVal; - - if (pPortAbility->link == 1) - { - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, 0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if((retVal = rtl8367c_setAsicRegBits(0x1311, 0x3, 2)) != RT_ERR_OK) - return retVal; - } - - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - } - else if (2 == id) - { - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 2, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x13c4, 0x3, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 4, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 6, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 5, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 12, pPortAbility->forcemode)) != RT_ERR_OK) - return retVal; - - if (pPortAbility->link == 1) - { - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 4, 0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 4, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if((retVal = rtl8367c_setAsicRegBits(0x13c4, 0x3, 2)) != RT_ERR_OK) - return retVal; - } - - if((retVal = rtl8367c_setAsicRegBit(0x1dc1, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1dc1, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1dc1, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1dc1, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1dc1, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - } - - } - else if(3 == type) - { - if(1 == id) - { - if((retVal = rtl8367c_getAsicRegBit(0x1d11, 6, &sgmiibit)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicRegBit(0x1d11, 11, &hisgmiibit)) != RT_ERR_OK) - return retVal; - - if ((sgmiibit == 1) || (hisgmiibit == 1)) - { - /*for 1000x/100fx/1000x_100fx, param has to be set to serdes registers*/ - if((retVal = rtl8367c_getAsicReg(0x1d41, ®Value)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib =1, bit7: cfg_mac6_fib2=1*/ - if((regValue & 0xa0) == 0xa0) - { - /* new_cfg_sds_mode */ - if((retVal = rtl8367c_getAsicRegBits(0x1d95, 0x1f00, ®Value2)) != RT_ERR_OK) - return retVal; - - /*1000X*/ - if(regValue2 == 0x4) - { -#if 0 - /* new_cfg_sds_mode:reset mode */ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - /* Enable new sds mode config */ - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 4*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0x9000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 1, bit13 set to 0, bit12 nway_en*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFDFFF; - reg_data |= 0x40; - if(pPortAbility->forcemode) - reg_data &= 0xffffefff; - else - reg_data |= 0x1000; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= (~0x80); - - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= (~0x100); - - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /*new_cfg_sds_mode=1000x*/ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x4)) != RT_ERR_OK) - return retVal; - - } - else if(regValue2 == 0x5) - { -#if 0 - /*100FX*/ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - /*cfg_sds_mode_sel_new=1 */ - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 5*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0xB000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 0, bit13 set to 1, bit12 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFFBF; - reg_data |= 0x2000; - reg_data &= 0xffffefff; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= (~0x80); - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= (~0x100); - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - /* new_cfg_sds_mode=1000x */ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x5)) != RT_ERR_OK) - return retVal; - - } - else if(regValue2 == 0x7) - { -#if 0 - /*100FX*/ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 4*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0x9000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 1, bit13 set to 0, bit12 nway_en*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFDFFF; - reg_data |= 0x40; - if(pPortAbility->forcemode) - reg_data &= 0xffffefff; - else - reg_data |= 0x1000; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= (~0x80); - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &=(~0x100); - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 5*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0xB000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 0, bit13 set to 1, bit12 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFFBF; - reg_data |= 0x2000; - reg_data &= 0xffffefff; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= 0xffffff7f; - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= 0xfffffeff; - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - /*sds_mode:*/ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x7)) != RT_ERR_OK) - return retVal; - - } - - /*disable force ability --- */ - if((retVal = rtl8367c_setAsicRegBit(0x137c, 12, 0)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - - } - - /* new_cfg_sds_mode */ - if((retVal = rtl8367c_getAsicRegBits(0x1d95, 0x1f00, ®Value2)) != RT_ERR_OK) - return retVal; - if(regValue2 == 0x2) - { -#if 0 - /*SGMII*/ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - for(i=0;i<0xfff; i++); - - /* 0 2 0 bit 8-9 nway*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xfffffcff; - if (pPortAbility->nway) - reg_data &= 0xfffffcff; - else - reg_data |= 0x100; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x2)) != RT_ERR_OK) - return retVal; - - for(i=0;i<0xfff; i++); - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - /*disable force ability --- */ - if((retVal = rtl8367c_setAsicRegBit(0x137c, 12, 0)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - else if(regValue2 == 0x12) - { -#if 0 - /*HiSGMII*/ - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - for(i=0;i<0xfff; i++); - - /* 0 2 0 bit 8-9 nway*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xfffffcff; - if (pPortAbility->nway) - reg_data &= 0xfffffcff; - else - reg_data |= 0x100; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x12)) != RT_ERR_OK) - return retVal; - - for(i=0;i<0xfff; i++); - - if((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0x1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - /*disable force ability --- */ - if((retVal = rtl8367c_setAsicRegBit(0x137c, 12, 0)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - - } - } - else - { - if((retVal = rtl8367c_getAsicRegBits(0x1d3d, 10, ®Value2)) != RT_ERR_OK) - return retVal; - if (regValue2 == 0) - { - /*ext1_force_ablty*/ - if((retVal = rtl8367c_setAsicRegBit(0x1311, 2, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1311, 0x3, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 6, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 5, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - /*force mode for ext1*/ - if((retVal = rtl8367c_setAsicRegBit(0x1311, 12, pPortAbility->forcemode)) != RT_ERR_OK) - return retVal; - - if (pPortAbility->link == 1) - { - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, 0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if((retVal = rtl8367c_setAsicRegBits(0x1311, 0x3, 2)) != RT_ERR_OK) - return retVal; - } - - /*disable force ability --- */ - if((retVal = rtl8367c_setAsicRegBit(0x137c, 12, 0)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - } - - - } - else if (2 == id) - { - - if((retVal = rtl8367c_getAsicRegBit(0x1d95, 0, &sgmiibit)) != RT_ERR_OK) - return retVal; - if (sgmiibit == 1) - { - /*for 1000x/100fx/1000x_100fx, param has to bet set to serdes registers*/ - if((retVal = rtl8367c_getAsicReg(0x1d95, ®Value)) != RT_ERR_OK) - return retVal; - /*cfg_mac7_sel_sgmii=1 & cfg_mac7_fib =1*/ - if((regValue & 0x3) == 0x3) - { - if((retVal = rtl8367c_getAsicRegBits(0x1d95, 0x1f00, ®Value2)) != RT_ERR_OK) - return retVal; - - if(regValue2 == 0x4) - { - /*1000X*/ -#if 0 - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 4*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0x9000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 1, bit13 set to 0, bit12 nway_en*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFDFFF; - reg_data |= 0x40; - if(pPortAbility->forcemode) - reg_data &= 0xffffefff; - else - reg_data |= 0x1000; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= 0xffffff7f; - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= 0xfffffeff; - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x4)) != RT_ERR_OK) - return retVal; - - } - else if(regValue2 == 0x5) - { - /*100FX*/ -#if 0 - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 5*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0xB000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 0, bit13 set to 1, bit12 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFFBF; - reg_data |= 0x2000; - reg_data &= 0xffffefff; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= 0xffffff7f; - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= 0xfffffeff; - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x5)) != RT_ERR_OK) - return retVal; - - } - else if(regValue2 == 0x7) - { - /*100FX*/ -#if 0 - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 4*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0x9000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 1, bit13 set to 0, bit12 nway_en*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFDFFF; - reg_data |= 0x40; - if(pPortAbility->forcemode) - reg_data &= 0xffffefff; - else - reg_data |= 0x1000; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= 0xffffff7f; - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= 0xfffffeff; - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 1, bit15~13 = 5*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFF0FFF; - reg_data |= 0xB000; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 0 2 bit 6 set 0, bit13 set to 1, bit12 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFFBF; - reg_data |= 0x2000; - reg_data &= 0xffffefff; - - if((retVal = rtl8367c_setAsicSdsReg(0,0,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 2 bit 8 rx pause, bit7 tx pause*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 2, ®_data)) != RT_ERR_OK) - return retVal; - if (pPortAbility->txpause) - reg_data |= 0x80; - else - reg_data &= 0xffffff7f; - if (pPortAbility->rxpause) - reg_data |= 0x100; - else - reg_data &= 0xfffffeff; - if((retVal = rtl8367c_setAsicSdsReg(0,4,2, reg_data)) != RT_ERR_OK) - return retVal; - - /* 0 4 0 bit 12 set 0*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFEFFF; - if((retVal = rtl8367c_setAsicSdsReg(0,4,0, reg_data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x7)) != RT_ERR_OK) - return retVal; - - } - - if((retVal = rtl8367c_setAsicRegBit(0x137d, 12, 0)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - - } - /* new_cfg_sds_mode */ - if((retVal = rtl8367c_getAsicRegBits(0x1d95, 0x1f00, ®Value2)) != RT_ERR_OK) - return retVal; - if(regValue2 == 0x2) - { - /*SGMII*/ -#if 0 - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; -#endif - if((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - for(i=0;i<0xfff; i++); - - /* 0 2 0 bit 8-9 nway*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xfffffcff; - if (pPortAbility->nway) - reg_data &= 0xfffffcff; - else - reg_data |= 0x100; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x2)) != RT_ERR_OK) - return retVal; - - for(i=0;i<0xfff; i++); - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x137d, 12, 0)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - } - else - { - - /*ext2_force_ablty*/ - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 2, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x13c4, 0x3, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 4, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 6, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 5, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - /*force mode for ext2*/ - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 12, pPortAbility->forcemode)) != RT_ERR_OK) - return retVal; - - if (pPortAbility->link == 1) - { - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 4, 0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x13c4, 4, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if((retVal = rtl8367c_setAsicRegBits(0x13c4, 0x3, 2)) != RT_ERR_OK) - return retVal; - } - - - if((retVal = rtl8367c_getAsicRegBit(0x1d3d, 10, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 1) - { - if((retVal = rtl8367c_setAsicRegBit(0x1311, 2, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(0x1311, 0x3, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, pPortAbility->link)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 6, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 5, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - /*force mode for ext1*/ - if((retVal = rtl8367c_setAsicRegBit(0x1311, 12, pPortAbility->forcemode)) != RT_ERR_OK) - return retVal; - - if (pPortAbility->link == 1) - { - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, 0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(0x1311, 4, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if((retVal = rtl8367c_setAsicRegBits(0x1311, 0x3, 2)) != RT_ERR_OK) - return retVal; - } - } - - - } - - /*disable force ability --- */ - if((retVal = rtl8367c_setAsicRegBit(0x137d, 12, 0)) != RT_ERR_OK) - return retVal; - } -#if 0 - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, pPortAbility->duplex)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, pPortAbility->speed)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, pPortAbility->txpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, pPortAbility->rxpause)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, pPortAbility->link)) != RT_ERR_OK) - return retVal; -#endif - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicPortForceLinkExt - * Description: - * Get external interface force linking configuration - * Input: - * id - external interface id (0~1) - * pPortAbility - port ability configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicPortForceLinkExt(rtk_uint32 id, rtl8367c_port_ability_t *pPortAbility) -{ - rtk_uint32 reg_data, regValue, type; - rtk_uint32 sgmiiSel; - rtk_uint32 hsgmiiSel; - ret_t retVal; - - /* Invalid input parameter */ - if(id >= RTL8367C_EXTNO) - return RT_ERR_OUT_OF_RANGE; - /*cfg_magic_id & get chip_id*/ - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - type = 0; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 1; - break; - case 0x0652: - case 0x6368: - type = 2; - break; - case 0x0801: - case 0x6511: - type = 3; - break; - default: - return RT_ERR_FAILED; - } - - if (1 == type) - { - if(1 == id) - { - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_SGMII_OFFSET, &sgmiiSel)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET, &hsgmiiSel)) != RT_ERR_OK) - return retVal; - - if( (sgmiiSel == 1) || (hsgmiiSel == 1) ) - { - memset(pPortAbility, 0x00, sizeof(rtl8367c_port_ability_t)); - pPortAbility->forcemode = 1; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_FDUP_OFFSET, ®_data)) != RT_ERR_OK) - return retVal; - - pPortAbility->duplex = reg_data; - - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_SPD_MASK, ®_data)) != RT_ERR_OK) - return retVal; - - pPortAbility->speed = reg_data; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_LINK_OFFSET, ®_data)) != RT_ERR_OK) - return retVal; - - pPortAbility->link = reg_data; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_TXFC_OFFSET, ®_data)) != RT_ERR_OK) - return retVal; - - pPortAbility->txpause = reg_data; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_SGMII_RXFC_OFFSET, ®_data)) != RT_ERR_OK) - return retVal; - - pPortAbility->rxpause = reg_data; - - return RT_ERR_OK; - } - } - - if(0 == id || 1 == id) - retVal = rtl8367c_getAsicReg(RTL8367C_REG_DIGITAL_INTERFACE0_FORCE+id, ®_data); - else - retVal = rtl8367c_getAsicReg(RTL8367C_REG_DIGITAL_INTERFACE2_FORCE, ®_data); - - if(retVal != RT_ERR_OK) - return retVal; - - pPortAbility->forcemode = (reg_data >> 12) & 0x0001; - pPortAbility->mstfault = (reg_data >> 9) & 0x0001; - pPortAbility->mstmode = (reg_data >> 8) & 0x0001; - pPortAbility->nway = (reg_data >> 7) & 0x0001; - pPortAbility->txpause = (reg_data >> 6) & 0x0001; - pPortAbility->rxpause = (reg_data >> 5) & 0x0001; - pPortAbility->link = (reg_data >> 4) & 0x0001; - pPortAbility->duplex = (reg_data >> 2) & 0x0001; - pPortAbility->speed = reg_data & 0x0003; - } - else if (2 == type) - { - if (id == 1) - { - if ((retVal = rtl8367c_getAsicReg(0x1311, ®_data))!=RT_ERR_OK) - return retVal; - - pPortAbility->forcemode = (reg_data >> 12) & 1; - pPortAbility->duplex = (reg_data >> 2) & 1; - pPortAbility->link = (reg_data >> 4) & 1; - pPortAbility->speed = reg_data & 3; - pPortAbility->rxpause = (reg_data >> 5) & 1; - pPortAbility->txpause = (reg_data >> 6) & 1; - } - else if (2 == id) - { - if ((retVal = rtl8367c_getAsicReg(0x13c4, ®_data))!=RT_ERR_OK) - return retVal; - - pPortAbility->forcemode = (reg_data >> 12) & 1; - pPortAbility->duplex = (reg_data >> 2) & 1; - pPortAbility->link = (reg_data >> 4) & 1; - pPortAbility->speed = reg_data & 3; - pPortAbility->rxpause = (reg_data >> 5) & 1; - pPortAbility->txpause = (reg_data >> 6) & 1; - } - } - else if (3 == type) - { - if (id == 1) - { - if ((retVal = rtl8367c_getAsicReg(0x1311, ®_data))!=RT_ERR_OK) - return retVal; - - pPortAbility->forcemode = (reg_data >> 12) & 1; - pPortAbility->duplex = (reg_data >> 2) & 1; - pPortAbility->link = (reg_data >> 4) & 1; - pPortAbility->speed = reg_data & 3; - pPortAbility->rxpause = (reg_data >> 5) & 1; - pPortAbility->txpause = (reg_data >> 6) & 1; - } - else if (2 == id) - { - if ((retVal = rtl8367c_getAsicReg(0x13c4, ®_data))!=RT_ERR_OK) - return retVal; - - pPortAbility->forcemode = (reg_data >> 12) & 1; - pPortAbility->duplex = (reg_data >> 2) & 1; - pPortAbility->link = (reg_data >> 4) & 1; - pPortAbility->speed = reg_data & 3; - pPortAbility->rxpause = (reg_data >> 5) & 1; - pPortAbility->txpause = (reg_data >> 6) & 1; - } - } - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicPortExtMode - * Description: - * Set external interface mode configuration - * Input: - * id - external interface id (0~2) - * mode - external interface mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicPortExtMode(rtk_uint32 id, rtk_uint32 mode) -{ - ret_t retVal; - rtk_uint32 i, regValue, type, option,reg_data; - rtk_uint32 idx; - rtk_uint32 redData[][2] = { {0x04D7, 0x0480}, {0xF994, 0x0481}, {0x21A2, 0x0482}, {0x6960, 0x0483}, {0x9728, 0x0484}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x83F2, 0x002E} }; - rtk_uint32 redDataSB[][2] = { {0x04D7, 0x0480}, {0xF994, 0x0481}, {0x31A2, 0x0482}, {0x6960, 0x0483}, {0x9728, 0x0484}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x83F2, 0x002E} }; - rtk_uint32 redData1[][2] = { {0x82F1, 0x0500}, {0xF195, 0x0501}, {0x31A2, 0x0502}, {0x796C, 0x0503}, {0x9728, 0x0504}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x0F80, 0x0001}, {0x83F2, 0x002E} }; - rtk_uint32 redData5[][2] = { {0x82F1, 0x0500}, {0xF195, 0x0501}, {0x31A2, 0x0502}, {0x796C, 0x0503}, {0x9728, 0x0504}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x0F80, 0x0001}, {0x83F2, 0x002E} }; - rtk_uint32 redData6[][2] = { {0x82F1, 0x0500}, {0xF195, 0x0501}, {0x31A2, 0x0502}, {0x796C, 0x0503}, {0x9728, 0x0504}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x0F80, 0x0001}, {0x83F2, 0x002E} }; - rtk_uint32 redData8[][2] = { {0x82F1, 0x0500}, {0xF995, 0x0501}, {0x31A2, 0x0502}, {0x796C, 0x0503}, {0x9728, 0x0504}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x0F80, 0x0001}, {0x83F2, 0x002E} }; - rtk_uint32 redData9[][2] = { {0x82F1, 0x0500}, {0xF995, 0x0501}, {0x31A2, 0x0502}, {0x796C, 0x0503}, {0x9728, 0x0504}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x0F80, 0x0001}, {0x83F2, 0x002E} }; - rtk_uint32 redDataHB[][2] = { {0x82F0, 0x0500}, {0xF195, 0x0501}, {0x31A2, 0x0502}, {0x7960, 0x0503}, {0x9728, 0x0504}, {0x9D85, 0x0423}, {0xD810, 0x0424}, {0x0F80, 0x0001}, {0x83F2, 0x002E} }; - - if(id >= RTL8367C_EXTNO) - return RT_ERR_OUT_OF_RANGE; - - if(mode >= EXT_END) - return RT_ERR_OUT_OF_RANGE; - - /* magic number*/ - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - /* Chip num */ - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - type = 0; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 1; - break; - case 0x0652: - case 0x6368: - type = 2; - break; - case 0x0801: - case 0x6511: - type = 3; - break; - default: - return RT_ERR_FAILED; - } - - - if (1==type) - { - if((mode == EXT_1000X_100FX) || (mode == EXT_1000X) || (mode == EXT_100FX)) - { - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_REG_TO_ECO4, 5, 1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_REG_TO_ECO4, 7, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_CHIP_RESET, RTL8367C_DW8051_RST_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MISCELLANEOUS_CONFIGURE0, RTL8367C_DW8051_EN_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_ACS_IROM_ENABLE_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_IROM_MSB_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if(mode == EXT_1000X_100FX) - { - for(idx = 0; idx < FIBER2_AUTO_INIT_SIZE; idx++) - { - if ((retVal = rtl8367c_setAsicReg(0xE000 + idx, (rtk_uint32)Fiber2_Auto[idx])) != RT_ERR_OK) - return retVal; - } - } - - if(mode == EXT_1000X) - { - for(idx = 0; idx < FIBER2_1G_INIT_SIZE; idx++) - { - if ((retVal = rtl8367c_setAsicReg(0xE000 + idx, (rtk_uint32)Fiber2_1G[idx])) != RT_ERR_OK) - return retVal; - } - } - - if(mode == EXT_100FX) - { - for(idx = 0; idx < FIBER2_100M_INIT_SIZE; idx++) - { - if ((retVal = rtl8367c_setAsicReg(0xE000 + idx, (rtk_uint32)Fiber2_100M[idx])) != RT_ERR_OK) - return retVal; - } - } - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_IROM_MSB_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_ACS_IROM_ENABLE_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_CHIP_RESET, RTL8367C_DW8051_RST_OFFSET, 0)) != RT_ERR_OK) - return retVal; - } - - if(mode == EXT_GMII) - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_EXT0_RGMXF, RTL8367C_EXT0_RGTX_INV_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_EXT1_RGMXF, RTL8367C_EXT1_RGTX_INV_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_EXT_TXC_DLY, RTL8367C_EXT1_GMII_TX_DELAY_MASK, 5)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_EXT_TXC_DLY, RTL8367C_EXT0_GMII_TX_DELAY_MASK, 6)) != RT_ERR_OK) - return retVal; - } - - /* Serdes reset */ - if( (mode == EXT_TMII_MAC) || (mode == EXT_TMII_PHY) ) - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_BYPASS_LINE_RATE, id, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_BYPASS_LINE_RATE, id, 0)) != RT_ERR_OK) - return retVal; - } - - if( (mode == EXT_SGMII) || (mode == EXT_HSGMII) ) - { - if(id != 1) - return RT_ERR_PORT_ID; - - if((retVal = rtl8367c_setAsicReg(0x13C0, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x13C1, &option)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C0, 0x0000)) != RT_ERR_OK) - return retVal; - } - - if(mode == EXT_SGMII) - { - if(option == 0) - { - for(i = 0; i <= 7; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redData[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redData[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - else - { - for(i = 0; i <= 7; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redDataSB[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redDataSB[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - } - - if(mode == EXT_HSGMII) - { - if(option == 0) - { - if( (retVal = rtl8367c_setAsicReg(0x13c2, 0x0249)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicReg(0x1301, ®Value)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(0x13c2, 0x0000)) != RT_ERR_OK) - return retVal; - - if ( ((regValue & 0x00F0) >> 4) == 0x0001) - { - for(i = 0; i <= 8; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redData1[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redData1[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - else if ( ((regValue & 0x00F0) >> 4) == 0x0005) - { - for(i = 0; i <= 8; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redData5[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redData5[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - else if ( ((regValue & 0x00F0) >> 4) == 0x0006) - { - for(i = 0; i <= 8; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redData6[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redData6[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - else if ( ((regValue & 0x00F0) >> 4) == 0x0008) - { - for(i = 0; i <= 8; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redData8[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redData8[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - else if ( ((regValue & 0x00F0) >> 4) == 0x0009) - { - for(i = 0; i <= 8; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redData9[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redData9[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - } - else - { - for(i = 0; i <= 8; i++) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, redDataHB[i][0])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, redDataHB[i][1])) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - } - } - - /* Only one ext port should care SGMII setting */ - if(id == 1) - { - - if(mode == EXT_SGMII) - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_SGMII_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET, 0)) != RT_ERR_OK) - return retVal; - } - else if(mode == EXT_HSGMII) - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_SGMII_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET, 1)) != RT_ERR_OK) - return retVal; - } - else - { - - if((mode != EXT_1000X_100FX) && (mode != EXT_1000X) && (mode != EXT_100FX)) - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_SGMII_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET, 0)) != RT_ERR_OK) - return retVal; - } - } - } - - if(0 == id || 1 == id) - { - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_DIGITAL_INTERFACE_SELECT, RTL8367C_SELECT_GMII_0_MASK << (id * RTL8367C_SELECT_GMII_1_OFFSET), mode)) != RT_ERR_OK) - return retVal; - } - else - { - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_DIGITAL_INTERFACE_SELECT_1, RTL8367C_SELECT_GMII_2_MASK, mode)) != RT_ERR_OK) - return retVal; - } - - /* Serdes not reset */ - if( (mode == EXT_SGMII) || (mode == EXT_HSGMII) ) - { - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x7106)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, 0x0003)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - } - - if( (mode == EXT_SGMII) || (mode == EXT_HSGMII) ) - { - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_CHIP_RESET, RTL8367C_DW8051_RST_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_MISCELLANEOUS_CONFIGURE0, RTL8367C_DW8051_EN_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_ACS_IROM_ENABLE_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_IROM_MSB_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - for(idx = 0; idx < SGMII_INIT_SIZE; idx++) - { - if ((retVal = rtl8367c_setAsicReg(0xE000 + idx, (rtk_uint32)Sgmii_Init[idx])) != RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_IROM_MSB_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_DW8051_RDY, RTL8367C_ACS_IROM_ENABLE_OFFSET, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_CHIP_RESET, RTL8367C_DW8051_RST_OFFSET, 0)) != RT_ERR_OK) - return retVal; - } - } - else if (2 == type) - { - /* Serdes reset */ - if( (mode == EXT_TMII_MAC) || (mode == EXT_TMII_PHY) ) - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_BYPASS_LINE_RATE, id+2, 1)) != RT_ERR_OK) - return retVal; - } - else - { - if( (retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_BYPASS_LINE_RATE, id+2, 0)) != RT_ERR_OK) - return retVal; - } - - /*set MAC mode*/ - if (id == 1) - { - if(mode == EXT_HSGMII) - return RT_ERR_PORT_ID; - - if (mode == EXT_SGMII) - { - /*cfg port8 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - - /*enable port8 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 14, 1)) != RT_ERR_OK) - return retVal; - } - else if (mode == EXT_1000X || mode == EXT_100FX || mode == EXT_1000X_100FX) - { - /*cfg port8 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - - /*disable port8 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 14, 0)) != RT_ERR_OK) - return retVal; - - /*set fiber link up*/ - if((retVal = rtl8367c_setAsicRegBit(0x6210, 11, 0)) != RT_ERR_OK) - return retVal; - } - else - { - /*cfg port8 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, mode)) != RT_ERR_OK) - return retVal; - - /*disable port8 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 14, 0)) != RT_ERR_OK) - return retVal; - } - /*disable SDS 1*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - } - else if(id == 2) - { - if (mode == EXT_HSGMII) - { - if ((retVal = rtl8367c_setAsicReg(0x130, 7)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x39f, 7)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x3fa, 7)) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtl8367c_setAsicReg(0x130, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x39f, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x3fa, 4)) != RT_ERR_OK) - return retVal; - - } - - - if (mode == EXT_SGMII) - { - /*cfg port9 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - /*enable port9 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 6, 1)) != RT_ERR_OK) - return retVal; - - /*disable port9 HSGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 7, 0)) != RT_ERR_OK) - return retVal; - } - else if (mode == EXT_HSGMII) - { - /*cfg port9 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - /*disable port9 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 6, 0)) != RT_ERR_OK) - return retVal; - - /*enable port9 HSGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 7, 1)) != RT_ERR_OK) - return retVal; - } - else if (mode == EXT_1000X || mode == EXT_100FX || mode == EXT_1000X_100FX) - { - /*cfg port9 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - /*disable port9 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 6, 0)) != RT_ERR_OK) - return retVal; - - /*disable port9 HSGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 7, 0)) != RT_ERR_OK) - return retVal; - - /*set fiber link up*/ - if((retVal = rtl8367c_setAsicRegBit(0x6200, 11, 0)) != RT_ERR_OK) - return retVal; - } - else - { - /*cfg port9 with MII mac mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, mode)) != RT_ERR_OK) - return retVal; - - /*disable port9 SGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 6, 0)) != RT_ERR_OK) - return retVal; - - /*disable port9 HSGMII*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d92, 7, 0)) != RT_ERR_OK) - return retVal; - } - /*disable SDS 0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 0x1f)) != RT_ERR_OK) - return retVal; - } - - /*SET TO RGMII MODE*/ - if (mode == EXT_RGMII) - { - /*disable paral led pad*/ - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PARA_LED_IO_EN3, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PARA_LED_IO_EN1, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_PARA_LED_IO_EN2, 0)) != RT_ERR_OK) - return retVal; - - /*set MAC8 mode*/ - if (id == 1) - { - /*1: RGMII1 bias work at 3.3V, 0: RGMII1 bias work at 2.5V*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 9, 1)) != RT_ERR_OK) - return retVal; - - /*drving 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 6, 1)) != RT_ERR_OK) - return retVal; - - /*drving 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 4, 1)) != RT_ERR_OK) - return retVal; - - /*show rate = 0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 1, 0)) != RT_ERR_OK) - return retVal; - - /*EXT1 RGMII TXC delay 2ns*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1307, 3, 1)) != RT_ERR_OK) - return retVal; - - /*cfg_Ext1_rgtxc_dly = 0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x38, 0)) != RT_ERR_OK) - return retVal; - - /*RXDLY = 0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1307, 0x7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_rg1_dn = 4*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1304, 0x7000, 4)) != RT_ERR_OK) - return retVal; - - /*cfg_rg1_dp = 4*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x700, 4)) != RT_ERR_OK) - return retVal; - } - else if (id == 2) - { - /*1: RGMII1 bias work at 3.3V, 0: RGMII1 bias work at 2.5V*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1303, 10, 1)) != RT_ERR_OK) - return retVal; - - /*drving 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x13e2, 2, 1)) != RT_ERR_OK) - return retVal; - - /*drving 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x13e2, 1, 1)) != RT_ERR_OK) - return retVal; - - /*show rate = 0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x13e2, 0, 0)) != RT_ERR_OK) - return retVal; - - /*EXT1 RGMII TXC delay 2ns*/ - if ((retVal = rtl8367c_setAsicRegBit(0x13c5, 3, 1)) != RT_ERR_OK) - return retVal; - - /*cfg_Ext1_rgtxc_dly = 0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13f9, 0x1c0, 0)) != RT_ERR_OK) - return retVal; - - /*RXDLY = 0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c5, 0x7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_rg1_dn = 4*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13e2, 0x1c0, 4)) != RT_ERR_OK) - return retVal; - - /*cfg_rg1_dp = 4*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13e2, 0x38, 4)) != RT_ERR_OK) - return retVal; - } - } - else if (mode == EXT_SGMII) - { - if (id == 1) - { - /*sds 1 reg 1 page 0x21 write value 0xec91*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0xec91)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x21<<5) | 1)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C1)) != RT_ERR_OK) - return retVal; - - /*sds 1 reg 5 page 0x24 write value 0x5825*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x5825)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x24<<5) | 5)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 2)) != RT_ERR_OK) - return retVal; - - /*?????????????????*/ - - } - else if (id == 2) - { - /*sds 0 reg 0 page 0x28 write value 0x942c*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x942c)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x28<<5) | 0)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - /*sds 0 reg 0 page 0x24 write value 0x942c*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x942c)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x24<<5) | 0)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - /*sds 0 reg 5 page 0x21 write value 0x8dc3*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x8dc3)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x21<<5) | 5)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 2)) != RT_ERR_OK) - return retVal; - - /*?????????????????*/ - } - } - else if (mode == EXT_HSGMII) - { - if (id == 2) - { - /*sds 0 reg 0 page 0x28 write value 0x942c*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x942c)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x28<<5) | 0)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - /*sds 0 reg 0 page 0x24 write value 0x942c*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x942c)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x24<<5) | 0)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - /*sds 0 reg 5 page 0x21 write value 0x8dc3*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x8dc3)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x21<<5) | 5)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - - /* optimizing HISGMII performance while RGMII used & */ - /*sds 0 reg 9 page 0x21 write value 0x3931*/ - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_DATA, 0x3931)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_ADR, (0x21<<5)|9) ) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_setAsicReg(RTL8367C_REG_SDS_INDACS_CMD, 0x00C0)) != RT_ERR_OK) - return retVal; - - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 0x12)) != RT_ERR_OK) - return retVal; - - /*?????????????????*/ - } - } - else if (mode == EXT_1000X) - { - if (id == 1) - { - - if( (retVal = rtl8367c_setAsicSdsReg(1, 1, 0x21, 0xec91)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(1, 5, 0x24, 0x5825)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 4)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - - /*patch speed change sds1 1000M*/ - if( (retVal = rtl8367c_getAsicSdsReg(1, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFF0FFF; - regValue |= 0x9000; - if( (retVal = rtl8367c_setAsicSdsReg(1, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(1, 0, 2, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFdFFF; - regValue |= 0x40; - if( (retVal = rtl8367c_setAsicSdsReg(1, 0, 2, regValue)) != RT_ERR_OK) - return retVal; - - - if( (retVal = rtl8367c_getAsicSdsReg(1, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFEFFF; - if( (retVal = rtl8367c_setAsicSdsReg(1, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 4)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x6000, 0)) != RT_ERR_OK) - return retVal; - - } - else if (id == 2) - { - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 0x28, 0x942c)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 0x24, 0x942c)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 5, 0x21, 0x8dc3)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 4)) != RT_ERR_OK) - return retVal; - - /*patch speed change sds0 1000M*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 0x1f)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFF0FFF; - regValue |= 0x9000; - if( (retVal = rtl8367c_setAsicSdsReg(0, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFDFFF; - regValue |= 0x40; - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 2, regValue)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFEFFF; - if( (retVal = rtl8367c_setAsicSdsReg(0, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 4)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0xe0, 0)) != RT_ERR_OK) - return retVal; - - } - } - else if (mode == EXT_100FX) - { - if (id == 1) - { - if( (retVal = rtl8367c_setAsicSdsReg(1, 1, 0x21, 0xec91)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(1, 5, 0x24, 0x5825)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 5)) != RT_ERR_OK) - return retVal; - - /*patch speed change sds1 100M*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_getAsicSdsReg(1, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFF0FFF; - regValue |= 0xb000; - if( (retVal = rtl8367c_setAsicSdsReg(1, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(1, 0, 2, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFFFBF; - regValue |= 0x2000; - if( (retVal = rtl8367c_setAsicSdsReg(1, 0, 2, regValue)) != RT_ERR_OK) - return retVal; -#if 0 - if( (retVal = rtl8367c_setAsicReg(0x6214, 0x1a0)) != RT_ERR_OK) - return retVal; -#endif - if( (retVal = rtl8367c_getAsicSdsReg(1, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFEFFF; - if( (retVal = rtl8367c_setAsicSdsReg(1, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 5)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x6000, 0)) != RT_ERR_OK) - return retVal; - } - else if (id == 2) - { - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 0x28, 0x942c)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 0x24, 0x942c)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 5, 0x21, 0x8dc3)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 5)) != RT_ERR_OK) - return retVal; - - /*patch speed change sds0 100M*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 0x1f)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFF0FFF; - regValue |= 0xb000; - if( (retVal = rtl8367c_setAsicSdsReg(0, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(0, 0, 2, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFFFBF; - regValue |= 0x2000; - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 2, regValue)) != RT_ERR_OK) - return retVal; - - if( (retVal = rtl8367c_getAsicSdsReg(0, 4, 0, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFEFFF; - if( (retVal = rtl8367c_setAsicSdsReg(0, 4, 0, regValue)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 5)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0xe0, 0)) != RT_ERR_OK) - return retVal; - } - } - else if (mode == EXT_1000X_100FX) - { - if (id == 1) - { - if( (retVal = rtl8367c_setAsicSdsReg(1, 1, 0x21, 0xec91)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(1, 5, 0x24, 0x5825)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(1, 13, 0, 0x4616)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(1, 1, 0, 0xf20)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f00, 7)) != RT_ERR_OK) - return retVal; - } - else if (id == 2) - { - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 0x28, 0x942c)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 0, 0x24, 0x942c)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 5, 0x21, 0x8dc3)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 13, 0, 0x4616)) != RT_ERR_OK) - return retVal; - if( (retVal = rtl8367c_setAsicSdsReg(0, 1, 0, 0xf20)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d92, 0x1f, 7)) != RT_ERR_OK) - return retVal; - } - } - - } - else if (3 == type) - { - - /*restore patch, by designer. patch Tx FIFO issue, when not HSGMII 2.5G mode - #sds0, page 1, reg 1, bit4=0*/ - if( (retVal = rtl8367c_getAsicSdsReg(0, 1, 1, ®Value)) != RT_ERR_OK) - return retVal; - regValue &= 0xFFFFFFEF; - if( (retVal = rtl8367c_setAsicSdsReg(0, 1, 1, regValue)) != RT_ERR_OK) - return retVal; - - /*set for mac 6*/ - if (1 == id) - { - /*force port6 linkdown*/ - if ((retVal = rtl8367c_setAsicReg(0x137c, 0x1000)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRegBit(0x1d9d, 6, ®_data)) != RT_ERR_OK) - return retVal; - while(reg_data == 0) - { - if ((retVal = rtl8367c_getAsicRegBit(0x1d9d, 6, ®_data)) != RT_ERR_OK) - return retVal; - } - - if (mode == EXT_SGMII) - { - /* disable mac6 mode_ext1 mode*/ - if ((retVal = rtl8367c_getAsicRegBit(0x1d3d, 10, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 0) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - } - /*cfg_bypass_line_rate[1]=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 0)) != RT_ERR_OK) - return retVal; - - - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_fib=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 1, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 0: MAC7 is not SGMII mode*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 0, 0)) != RT_ERR_OK) - return retVal; - - /*#cfg_sgmii_link=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 9, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_hsgmii=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0)) != RT_ERR_OK) - return retVal; - - - /*bit13: cfg_sds_mode_sel_new=1 :Enable new sds mode config method*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x1F (reset mode) */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii= 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x12 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x2)) != RT_ERR_OK) - return retVal; - - /* MAC link source*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 2, 0)) != RT_ERR_OK) - return retVal; - - - } - else if (mode == EXT_HSGMII) - { - - /*restore patch, by designer. patch Tx FIFO issue, when HSGMII 2.5G mode - #sds0, page 1, reg 1, bit4=1*/ - if( (retVal = rtl8367c_getAsicSdsReg(0, 1, 1, ®Value)) != RT_ERR_OK) - return retVal; - regValue |= 0x10; - if( (retVal = rtl8367c_setAsicSdsReg(0, 1, 1, regValue)) != RT_ERR_OK) - return retVal; - - /* mode_ext1 = disable*/ - /* disable mac6 mode_ext1 mode*/ - if ((retVal = rtl8367c_getAsicRegBit(0x1d3d, 10, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 0) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 0)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_fib=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 1, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 0, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 9, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_hsgmii=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 1)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii= 0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0xd0,7)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x399, 7)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x3fa, 7)) != RT_ERR_OK) - return retVal; - - /*bit13: cfg_sds_mode_sel_new=1 :Enable new sds mode config method*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x12 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x12)) != RT_ERR_OK) - return retVal; - /* - 1: MAC link = SGMII SerDes link - 0: MAC link = SGMII config link £¨cfg_sgmii_link£© - */ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 2, 0)) != RT_ERR_OK) - return retVal; - - } - else if(mode == EXT_1000X) - { - /* 0 2 0 bit 8~9 set 0, force n-way*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFCFF; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* disable mac6 mode_ext1 mode*/ - if ((retVal = rtl8367c_getAsicRegBit(0x1d3d, 10, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 0) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x1d11, 0x1500)) != RT_ERR_OK) - return retVal; - - /*bit13: cfg_sds_mode_sel_new=1 :Enable new sds mode config method - bit[1:0]:cfg_mac7_fib= 0 & cfg_mac7_sel_sgmii=0 - */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 0)) != RT_ERR_OK) - return retVal; - - /* bit0 :UTP/Fiber auto detect function enable or not, cfg_dis_det=1:disable - bit3:Force UTP/Fiber auto detect function enable or not, cfg_force_auto-detect=1 */ - if ((retVal = rtl8367c_setAsicReg(0x13eb, 0x15bb)) != RT_ERR_OK) - return retVal; - - /*bit3: Serdes force mode:cfg_sds_frc_mode=1 - bit[2:0]: Serdes chip mode, cfg_sds_mode=3b'100 (force sds FIB1G mode) */ - if ((retVal = rtl8367c_setAsicReg(0x13e7, 0xc)) != RT_ERR_OK) - return retVal; - - - /*bit5: cfg_mac6_fib=1 & bit7: cfg_mac6_fib2=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 1)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_hsgmii=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii= 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x4 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x4)) != RT_ERR_OK) - return retVal; - } - else if(mode == EXT_100FX) - { - /* 0 2 0 bit 8~9 set 0, force n-way*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFCFF; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* disable mac6 mode_ext1 mode*/ - if ((retVal = rtl8367c_getAsicRegBit(0x1d3d, 10, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 0) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x1d11, 0x1500)) != RT_ERR_OK) - return retVal; - - /*bit13: cfg_sds_mode_sel_new=1 :Enable new sds mode config method - bit[1:0]:cfg_mac7_fib= 0 & cfg_mac7_sel_sgmii=0 - */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 0)) != RT_ERR_OK) - return retVal; - - /* bit0 :UTP/Fiber auto detect function enable or not, cfg_dis_det=1:disable - bit3:Force UTP/Fiber auto detect function enable or not, cfg_force_auto-detect=1 */ - if ((retVal = rtl8367c_setAsicReg(0x13eb, 0x15bb)) != RT_ERR_OK) - return retVal; - - /*!!!!! cfg_sds_frc_mode=1 & cfg_sds_mode=3b'101 (force sds fib100M mode)*/ - if ((retVal = rtl8367c_setAsicReg(0x13e7, 0xc)) != RT_ERR_OK) - return retVal; - - - /*bit5: cfg_mac6_fib=1 & bit7: cfg_mac6_fib2=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 1)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_hsgmii=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii= 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x5 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x5)) != RT_ERR_OK) - return retVal; - } - else if(mode == EXT_1000X_100FX) - { - /* 0 2 0 bit 8~9 set 0, force n-way*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFCFF; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - /* disable mac6 mode_ext1 mode*/ - if ((retVal = rtl8367c_getAsicRegBit(0x1d3d, 10, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 0) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 0)) != RT_ERR_OK) - return retVal; - } - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicReg(0x1d11, 0x1500)) != RT_ERR_OK) - return retVal; - - /*bit13: cfg_sds_mode_sel_new=1 :Enable new sds mode config method - bit[1:0]:cfg_mac7_fib= 0 & cfg_mac7_sel_sgmii=0 - */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 0)) != RT_ERR_OK) - return retVal; - - /* bit0 :UTP/Fiber auto detect function enable or not, cfg_dis_det=1:disable - bit3:Force UTP/Fiber auto detect function enable or not, cfg_force_auto-detect=1 */ - if ((retVal = rtl8367c_setAsicReg(0x13eb, 0x15bb)) != RT_ERR_OK) - return retVal; - - /*!!!!!! cfg_sds_frc_mode=1 & cfg_sds_mode=3'b111: Fib1G/Fib100M auto detect */ - if ((retVal = rtl8367c_setAsicReg(0x13e7, 0xc)) != RT_ERR_OK) - return retVal; - - - /*bit5: cfg_mac6_fib=1 & bit7: cfg_mac6_fib2=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 1)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 1)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_hsgmii=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii= 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x7 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x7)) != RT_ERR_OK) - return retVal; - } - else if(mode < EXT_SGMII) - { - if ((retVal = rtl8367c_setAsicRegBit(0x1d3d, 10, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 0)) != RT_ERR_OK) - return retVal; - - /* keep default setting, disable mac6 sel SerDes mode,*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 0)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - if (mode < EXT_GMII) - { - /* set mac6 mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, mode)) != RT_ERR_OK) - return retVal; - } - else if(mode == EXT_RMII_MAC) - { - /*!!!!!!*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 7)) != RT_ERR_OK) - return retVal; - } - else if(mode == EXT_RMII_PHY) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, 8)) != RT_ERR_OK) - return retVal; - } - - if ((mode == EXT_TMII_MAC) || (mode == EXT_TMII_PHY)) - { - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 1, 1)) != RT_ERR_OK) - return retVal; - } - } - - } - else if (2 == id) - { - - /*force port7 linkdown*/ - if ((retVal = rtl8367c_setAsicReg(0x137d, 0x1000)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRegBit(0x1d9d, 7, ®_data)) != RT_ERR_OK) - return retVal; - while(reg_data == 0) - { - if ((retVal = rtl8367c_getAsicRegBit(0x1d9d, 7, ®_data)) != RT_ERR_OK) - return retVal; - } - - if (mode == EXT_SGMII) - { - /*disable mac7 sel ext2 xMII mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf,0)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicReg(0x13c4, 0)) != RT_ERR_OK) - return retVal; - /* disable mac7 mode_ext2 */ - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 0)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - /* - bit0:cfg_mac7_sel_sgmii=0,MAC7 is not SGMII mode - bit1:cfg_mac7_fib= 0 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_hsgmii=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 11, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac6_sel_sgmii= 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 0)) != RT_ERR_OK) - return retVal; - - /*Enable new sds mode config method, cfg_sds_mode_sel_new=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x1F (reset mode) */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 0, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x2 (SGMII mode)*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x2)) != RT_ERR_OK) - return retVal; - - /*select MAC link source when port6/7 be set sgmii mode £¨cfg_sgmii_link£©*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 2, 0)) != RT_ERR_OK) - return retVal; - } - else if (mode == EXT_1000X) - { - /* disable mac7 MII/TMM/RMII/GMII/RGMII mode, mode_ext2 = disable */ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicReg(0x13c4, 0)) != RT_ERR_OK) - return retVal; - - /* 0 2 0 bit 8~9 set 0, force n-way*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFCFF; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 0)) != RT_ERR_OK) - return retVal; - - /* keep default setting, disable mac6 sel serdes*/ - if ((retVal = rtl8367c_setAsicReg(0x1d11, 0x1500)) != RT_ERR_OK) - return retVal; - - /*Enable new sds mode config method, cfg_sds_mode_sel_new=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x1F (reset mode) */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 1 & cfg_mac7_fib=1*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 3)) != RT_ERR_OK) - return retVal; - - /*new_cfg_sds_mode=0x4 (FIB1000 mode)*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x4)) != RT_ERR_OK) - return retVal; - - } - else if (mode == EXT_100FX) - { - /* disable mac7 MII/TMM/RMII/GMII/RGMII mode, mode_ext2 = disable */ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicReg(0x13c4, 0)) != RT_ERR_OK) - return retVal; - - /* 0 2 0 bit 8~9 set 0, force n-way*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFCFF; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 0)) != RT_ERR_OK) - return retVal; - - /* keep default setting, disable mac6 sel serdes*/ - if ((retVal = rtl8367c_setAsicReg(0x1d11, 0x1500)) != RT_ERR_OK) - return retVal; - - /*Enable new sds mode config method, cfg_sds_mode_sel_new=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x1F (reset mode) */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 1 & cfg_mac7_fib=1*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 3)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x5 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x5)) != RT_ERR_OK) - return retVal; - } - else if (mode == EXT_1000X_100FX) - { - /* disable mac7 MII/TMM/RMII/GMII/RGMII mode, mode_ext2 = disable */ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicReg(0x13c4, 0)) != RT_ERR_OK) - return retVal; - - /* 0 2 0 bit 8~9 set 0, force n-way*/ - if((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®_data)) != RT_ERR_OK) - return retVal; - reg_data &= 0xFFFFFCFF; - if((retVal = rtl8367c_setAsicSdsReg(0,2,0, reg_data)) != RT_ERR_OK) - return retVal; - - /*restore ext2 ability*/ - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 0)) != RT_ERR_OK) - return retVal; - - /* keep default setting, disable mac6 sel serdes*/ - if ((retVal = rtl8367c_setAsicReg(0x1d11, 0x1500)) != RT_ERR_OK) - return retVal; - - /*Enable new sds mode config method, cfg_sds_mode_sel_new=1*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d95, 13, 1)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x1F (reset mode) */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x1f)) != RT_ERR_OK) - return retVal; - - /*bit5: cfg_mac6_fib=0 & bit7: cfg_mac6_fib2=0*/ - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 5, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicRegBit(0x1d41, 7, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 1 & cfg_mac7_fib=1*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 3)) != RT_ERR_OK) - return retVal; - - /* bit[12:8]: Only valid when cfg_sds_mode_sel_new=1 - new_cfg_sds_mode=0x7 */ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 0x1f00, 0x7)) != RT_ERR_OK) - return retVal; - } - else if (mode < EXT_SGMII) - { - if ((retVal = rtl8367c_setAsicRegBit(0x1d3d, 10, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 0)) != RT_ERR_OK) - return retVal; - - /* keep default setting, disable mac7 sel SerDes mode*/ - if ((retVal = rtl8367c_setAsicReg(0x1d95, 0x1f00)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 0 & cfg_mac7_fib=0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 0)) != RT_ERR_OK) - return retVal; - - /* set port7 mode*/ - if ((retVal = rtl8367c_setAsicRegBits(0x13c3, 0xf, mode)) != RT_ERR_OK) - return retVal; - - if ((mode == EXT_TMII_MAC) || (mode == EXT_TMII_PHY)) - { - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 1)) != RT_ERR_OK) - return retVal; - } - - } - else if ((mode < EXT_END) && (mode > EXT_100FX)) - { - if ((retVal = rtl8367c_setAsicRegBits(0x13C3, 0xf, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 0)) != RT_ERR_OK) - return retVal; - - /*cfg_mac7_sel_sgmii= 0 & cfg_mac7_fib=0*/ - if ((retVal = rtl8367c_setAsicRegBits(0x1d95, 3, 0)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRegBit(0x1d3d, 10, 1)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicRegBit(0x1d11, 11, ®_data)) != RT_ERR_OK) - return retVal; - if(reg_data == 0) - { - if ((retVal = rtl8367c_setAsicRegBit(0x1d11, 6, 1)) != RT_ERR_OK) - return retVal; - } - - /* set port7 mode*/ - if (mode < EXT_RMII_MAC_2) - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, (mode-13))) != RT_ERR_OK) - return retVal; - } - else - { - if ((retVal = rtl8367c_setAsicRegBits(0x1305, 0xf0, (mode-12))) != RT_ERR_OK) - return retVal; - } - - if ((mode == EXT_TMII_MAC_2) || (mode == EXT_TMII_PHY_2)) - { - if ((retVal = rtl8367c_setAsicRegBit(0x3f7, 2, 1)) != RT_ERR_OK) - return retVal; - } - } - - } - - } - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicPortExtMode - * Description: - * Get external interface mode configuration - * Input: - * id - external interface id (0~1) - * pMode - external interface mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicPortExtMode(rtk_uint32 id, rtk_uint32 *pMode) -{ - ret_t retVal; - rtk_uint32 regData, regValue, type; - - if(id >= RTL8367C_EXTNO) - return RT_ERR_OUT_OF_RANGE; - /*cfg_magic_id & get chip_id*/ - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - type = 0; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 1; - break; - case 0x0652: - case 0x6368: - type = 2; - break; - case 0x0801: - case 0x6511: - type = 3; - break; - default: - return RT_ERR_FAILED; - } - - - if (1 == type) - { - - if (1 == id) - { - if( (retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_SGMII_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - - if(1 == regData) - { - *pMode = EXT_SGMII; - return RT_ERR_OK; - } - - if( (retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SDS_MISC, RTL8367C_CFG_MAC8_SEL_HSGMII_OFFSET, ®Data)) != RT_ERR_OK) - return retVal; - - if(1 == regData) - { - *pMode = EXT_HSGMII; - return RT_ERR_OK; - } - } - - if(0 == id || 1 == id) - return rtl8367c_getAsicRegBits(RTL8367C_REG_DIGITAL_INTERFACE_SELECT, RTL8367C_SELECT_GMII_0_MASK << (id * RTL8367C_SELECT_GMII_1_OFFSET), pMode); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_DIGITAL_INTERFACE_SELECT_1, RTL8367C_SELECT_GMII_2_MASK, pMode); - - } - else if (2 == type) - { - if (1 == id) - { - if ((retVal = rtl8367c_getAsicReg(0x1d92, ®Data))!=RT_ERR_OK) - return retVal; - - if (regData & 0x4000) - { - *pMode = EXT_SGMII; - return RT_ERR_OK; - } - - else if (((regData >> 8) & 0x1f) == 4) - { - *pMode = EXT_1000X; - return RT_ERR_OK; - } - else if (((regData >> 8) & 0x1f) == 5) - { - *pMode = EXT_100FX; - return RT_ERR_OK; - } - else if (((regData >> 8) & 0x1f) == 7) - { - *pMode = EXT_1000X_100FX; - return RT_ERR_OK; - } - - return rtl8367c_getAsicRegBits(0x1305, 0xf0, pMode); - } - else if (2 == id) - { -#if 0 - if ((retVal = rtl8367c_getAsicRegBit(0x1d92, 6, ®Data))!=RT_ERR_OK) - return retVal; - - if (regData == 1) - { - *pMode = EXT_SGMII; - return RT_ERR_OK; - } - - if ((retVal = rtl8367c_getAsicRegBit(0x1d92, 7, ®Data))!=RT_ERR_OK) - return retVal; - - if (regData == 1) - { - *pMode = EXT_HSGMII; - return RT_ERR_OK; - } -#endif - if ((retVal = rtl8367c_getAsicReg(0x1d92, ®Data))!=RT_ERR_OK) - return retVal; - - if (regData & 0x40) - { - *pMode = EXT_SGMII; - return RT_ERR_OK; - } - else if (regData & 0x80) - { - *pMode = EXT_HSGMII; - return RT_ERR_OK; - } - else if ((regData & 0x1f) == 4) - { - *pMode = EXT_1000X; - return RT_ERR_OK; - } - else if ((regData & 0x1f) == 5) - { - *pMode = EXT_100FX; - return RT_ERR_OK; - } - else if ((regData & 0x1f) == 7) - { - *pMode = EXT_1000X_100FX; - return RT_ERR_OK; - } - - return rtl8367c_getAsicRegBits(0x1305, 0xf, pMode); - } - } - else if(3 == type) - { - if (1 == id) - { - /* SDS_CFG_NEW */ - if ((retVal = rtl8367c_getAsicReg(0x1d95, ®Data))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicReg(0x1d41, ®Value))!=RT_ERR_OK) - return retVal; - - /* bit5: cfg_mac6_fib=1 && bit7: cfg_mac6_fib2 =1 */ - if((regValue & 0xa0) == 0xa0 ) - { - /* new_cfg_sds_mode */ - regData = regData >> 8; - if((regData & 0x1f) == 4) - { - *pMode = EXT_1000X; - return RT_ERR_OK; - } - else if((regData & 0x1f) == 5) - { - *pMode = EXT_100FX; - return RT_ERR_OK; - } - else if((regData & 0x1f) == 7) - { - *pMode = EXT_1000X_100FX; - return RT_ERR_OK; - } - - } - - - if ((retVal = rtl8367c_getAsicReg(0x1d11, ®Data))!=RT_ERR_OK) - return retVal; - - /* check cfg_mac6_sel_sgmii */ - if((regData >> 6) & 1) - { - *pMode = EXT_SGMII; - return RT_ERR_OK; - } - else if((regData >> 11) & 1) - { - *pMode = EXT_HSGMII; - return RT_ERR_OK; - } - else - { - /* check port6 MAC mode */ - if ((retVal = rtl8367c_getAsicRegBits(0x1305, 0xf0, ®Data))!=RT_ERR_OK) - return retVal; - - if(regData < 6) - *pMode = regData; - else if(regData == 6) - *pMode = EXT_RMII_MAC; - else if(regData == 7) - *pMode = EXT_RMII_PHY; - - return RT_ERR_OK; - } - } - else if (2 == id) - { - if ((retVal = rtl8367c_getAsicReg(0x1d95, ®Data))!=RT_ERR_OK) - return retVal; - - /* bit0: cfg_mac7_sel_sgmii - bit1: cfg_mac7_fib - bit[12:8]: new_cfg_sds_mode*/ - if(((regData & 0x3) == 3) && (((regData >> 8) & 0x1f) == 0x4)) - { - *pMode = EXT_1000X; - return RT_ERR_OK; - } - else if (((regData & 0x3) == 3) && (((regData >> 8) & 0x1f) == 0x5)) - { - *pMode = EXT_100FX; - return RT_ERR_OK; - } - else if (((regData & 0x3) == 3) && (((regData >> 8) & 0x1f) == 0x7)) - { - *pMode = EXT_1000X_100FX; - return RT_ERR_OK; - } - else if(regData & 1) - { - *pMode = EXT_SGMII; - return RT_ERR_OK; - } - else - { - /* check port7 MAC mode */ - if ((retVal = rtl8367c_getAsicRegBits(0x13c3, 0xf, ®Data))!=RT_ERR_OK) - return retVal; - - *pMode = regData; - - return RT_ERR_OK; - } - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8370_setAsicPortEnableAll - * Description: - * Set ALL ports enable. - * Input: - * enable - enable all ports. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortEnableAll(rtk_uint32 enable) -{ - if(enable >= 2) - return RT_ERR_INPUT; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_PHY_AD, RTL8367C_PDNPHY_OFFSET, !enable); -} - -/* Function Name: - * rtl8367c_getAsicPortEnableAll - * Description: - * Set ALL ports enable. - * Input: - * enable - enable all ports. - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortEnableAll(rtk_uint32 *pEnable) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_PHY_AD, RTL8367C_PDNPHY_OFFSET, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - if (regData==0) - *pEnable = 1; - else - *pEnable = 0; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicPortSmallIpg - * Description: - * Set small ipg egress mode - * Input: - * port - Physical port number (0~7) - * enable - 0: normal, 1: small - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortSmallIpg(rtk_uint32 port, rtk_uint32 enable) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_PORT_SMALL_IPG_REG(port), RTL8367C_PORT0_MISC_CFG_SMALL_TAG_IPG_OFFSET, enable); -} - -/* Function Name: - * rtl8367c_getAsicPortSmallIpg - * Description: - * Get small ipg egress mode - * Input: - * port - Physical port number (0~7) - * pEnable - 0: normal, 1: small - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortSmallIpg(rtk_uint32 port, rtk_uint32* pEnable) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_PORT_SMALL_IPG_REG(port), RTL8367C_PORT0_MISC_CFG_SMALL_TAG_IPG_OFFSET, pEnable); -} - -/* Function Name: - * rtl8367c_setAsicPortLoopback - * Description: - * Set MAC loopback - * Input: - * port - Physical port number (0~7) - * enable - 0: Disable, 1: enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortLoopback(rtk_uint32 port, rtk_uint32 enable) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_PORT_MISC_CFG_REG(port), RTL8367C_PORT0_MISC_CFG_MAC_LOOPBACK_OFFSET, enable); -} - -/* Function Name: - * rtl8367c_getAsicPortLoopback - * Description: - * Set MAC loopback - * Input: - * port - Physical port number (0~7) - * Output: - * pEnable - 0: Disable, 1: enable - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortLoopback(rtk_uint32 port, rtk_uint32 *pEnable) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_PORT_MISC_CFG_REG(port), RTL8367C_PORT0_MISC_CFG_MAC_LOOPBACK_OFFSET, pEnable); -} - -/* Function Name: - * rtl8367c_setAsicPortRTCTEnable - * Description: - * Set RTCT Enable echo response mode - * Input: - * portmask - Port mask of RTCT enabled (0-4) - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask - * Note: - * RTCT test takes 4.8 seconds at most. - */ -ret_t rtl8367c_setAsicPortRTCTEnable(rtk_uint32 portmask) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 port; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Data)) != RT_ERR_OK) - return retVal; - - if( (regData == 0x0276) || (regData == 0x0597) ) - return RT_ERR_CHIP_NOT_SUPPORTED; - - for(port = 0; port <= 10 ; port++) - { - if(portmask & (0x0001 << port)) - { - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa422, ®Data)) != RT_ERR_OK) - return retVal; - - regData &= 0x7FFF; - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa422, regData)) != RT_ERR_OK) - return retVal; - - regData |= 0x00F2;/*RTCT set to echo response mode*/ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa422, regData)) != RT_ERR_OK) - return retVal; - - regData |= 0x0001; - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa422, regData)) != RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicPortRTCTDisable - * Description: - * Set RTCT Disable - * Input: - * portmask - Port mask of RTCT enabled (0-4) - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask - * Note: - * RTCT test takes 4.8 seconds at most. - */ -ret_t rtl8367c_setAsicPortRTCTDisable(rtk_uint32 portmask) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 port; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Data)) != RT_ERR_OK) - return retVal; - - if( (regData == 0x0276) || (regData == 0x0597) ) - return RT_ERR_CHIP_NOT_SUPPORTED; - - for(port = 0; port <= 10 ; port++) - { - if(portmask & (0x0001 << port)) - { - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa422, ®Data)) != RT_ERR_OK) - return retVal; - - regData &= 0x7FFF; - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa422, regData)) != RT_ERR_OK) - return retVal; - - regData |= 0x00F0; - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa422, regData)) != RT_ERR_OK) - return retVal; - - regData &= ~0x0001; - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa422, regData)) != RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; -} - - -/* Function Name: - * rtl8367c_getAsicPortRTCTResult - * Description: - * Get RTCT result - * Input: - * port - Port ID of RTCT result - * Output: - * pResult - The result of port ID - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid port mask - * RT_ERR_PHY_RTCT_NOT_FINISH - RTCT test doesn't finish. - * Note: - * RTCT test takes 4.8 seconds at most. - * If this API returns RT_ERR_PHY_RTCT_NOT_FINISH, - * users should wait a whole then read it again. - */ -ret_t rtl8367c_getAsicPortRTCTResult(rtk_uint32 port, rtl8367c_port_rtct_result_t *pResult) -{ - ret_t retVal; - rtk_uint32 regData, finish = 1; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Data)) != RT_ERR_OK) - return retVal; - - if( (regData == 0x6367) ) - { - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa422, ®Data)) != RT_ERR_OK) - return retVal; - - if((regData & 0x8000) == 0x8000) - { - /* Channel A */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802a)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelAOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelAShort = (regData == 0x0050) ? 1 : 0; - pResult->channelAMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelALinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel B */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802e)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelBOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelBShort = (regData == 0x0050) ? 1 : 0; - pResult->channelBMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelBLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel C */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8032)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelCOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelCShort = (regData == 0x0050) ? 1 : 0; - pResult->channelCMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelCLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel D */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8036)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelDOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelDShort = (regData == 0x0050) ? 1 : 0; - pResult->channelDMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelDLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel A Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802c)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelALen = (regData / 2); - - /* Channel B Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8030)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelBLen = (regData / 2); - - /* Channel C Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8034)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelCLen = (regData / 2); - - /* Channel D Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8038)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelDLen = (regData / 2); - } - else - finish = 0; - } - else if(regData == 0x6368) - { - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa422, ®Data)) != RT_ERR_OK) - return retVal; - - if((regData & 0x8000) == 0x8000) - { - /* Channel A */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802b)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelAOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelAShort = (regData == 0x0050) ? 1 : 0; - pResult->channelAMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelALinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel B */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802f)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelBOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelBShort = (regData == 0x0050) ? 1 : 0; - pResult->channelBMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelBLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel C */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8033)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelCOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelCShort = (regData == 0x0050) ? 1 : 0; - pResult->channelCMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelCLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel D */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8037)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelDOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelDShort = (regData == 0x0050) ? 1 : 0; - pResult->channelDMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelDLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel A Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802d)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelALen = (regData / 2); - - /* Channel B Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8031)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelBLen = (regData / 2); - - /* Channel C Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8035)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelCLen = (regData / 2); - - /* Channel D Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8039)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelDLen = (regData / 2); - } - else - finish = 0; - - } - else if((regData == 0x6511) || (regData == 0x0801)) - { - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa422, ®Data)) != RT_ERR_OK) - return retVal; - - if((regData & 0x8000) == 0x8000) - { - /* Channel A */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802a)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelAOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelAShort = (regData == 0x0050) ? 1 : 0; - pResult->channelAMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelALinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel B */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802e)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelBOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelBShort = (regData == 0x0050) ? 1 : 0; - pResult->channelBMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelBLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel C */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8032)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelCOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelCShort = (regData == 0x0050) ? 1 : 0; - pResult->channelCMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelCLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel D */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8036)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelDOpen = (regData == 0x0048) ? 1 : 0; - pResult->channelDShort = (regData == 0x0050) ? 1 : 0; - pResult->channelDMismatch = ((regData == 0x0042) || (regData == 0x0044)) ? 1 : 0; - pResult->channelDLinedriver = (regData == 0x0041) ? 1 : 0; - - /* Channel A Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x802c)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelALen = (regData / 2); - - /* Channel B Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8030)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelBLen = (regData / 2); - - /* Channel C Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8034)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelCLen = (regData / 2); - - /* Channel D Length */ - if((retVal = rtl8367c_setAsicPHYOCPReg(port, 0xa436, 0x8038)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicPHYOCPReg(port, 0xa438, ®Data)) != RT_ERR_OK) - return retVal; - - pResult->channelDLen = (regData / 2); - } - else - finish = 0; - - } - else - return RT_ERR_CHIP_NOT_SUPPORTED; - - if(finish == 0) - return RT_ERR_PHY_RTCT_NOT_FINISH; - else - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_sdsReset - * Description: - * Reset Serdes - * Input: - * id - EXT ID - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -ret_t rtl8367c_sdsReset(rtk_uint32 id) -{ - rtk_uint32 retVal, regValue, state, i, option, running = 0, retVal2; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - option = 0; - break; - case 0x0652: - case 0x6368: - option = 1; - break; - case 0x0801: - case 0x6511: - option = 2; - break; - default: - return RT_ERR_FAILED; - } - - if(option == 0) - { - if (1 == id) - { - if ((retVal = rtl8367c_getAsicRegBit(0x130c, 5, &running))!=RT_ERR_OK) - return retVal; - - if(running == 1) - { - if ((retVal = rtl8367c_setAsicRegBit(0x130c, 5, 0))!=RT_ERR_OK) - return retVal; - } - - retVal = rtl8367c_setAsicReg(0x6601, 0x0000); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6602, 0x1401); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6600, 0x00C0); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6601, 0x0000); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6602, 0x1403); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6600, 0x00C0); - - if(running == 1) - { - if ((retVal2 = rtl8367c_setAsicRegBit(0x130c, 5, 1))!=RT_ERR_OK) - return retVal2; - } - - if(retVal != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_PORT_ID; - } - else if(option == 1) - { - if (1 == id) - { - if((retVal = rtl8367c_getAsicReg(0x1311, &state)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1311, 0x66)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x1311, 0x1066)) != RT_ERR_OK) - return retVal; - - while(1) - { - if((retVal = rtl8367c_getAsicReg(0x1d9d, ®Value)) != RT_ERR_OK) - return retVal; - if((regValue >> 8) & 1) - break; - } - - for (i=0; i<0xffff; i++); - - if((retVal = rtl8367c_setAsicReg(0x133d, 0x2)) != RT_ERR_OK) - return retVal; - - for (i=0; i<0xffff; i++); - - if((retVal = rtl8367c_setAsicReg(0x6601, 0x0)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6602, 0x1401)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6600, 0xc1)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6601, 0x0)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6602, 0x1403)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6600, 0xc1)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x133d, 0x0)) != RT_ERR_OK) - return retVal; - - for (i=0; i<0xffff; i++); - - if((retVal = rtl8367c_setAsicReg(0x1311, state)) != RT_ERR_OK) - return retVal; - - - } - else if (2== id) - { - if((retVal = rtl8367c_getAsicReg(0x13c4, &state)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13c4, 0x66)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13c4, 0x1066)) != RT_ERR_OK) - return retVal; - - while(1) - { - if((retVal = rtl8367c_getAsicReg(0x1d9d, ®Value)) != RT_ERR_OK) - return retVal; - if((regValue >> 9) & 1) - break; - } - - for (i=0; i<0xffff; i++); - - if((retVal = rtl8367c_setAsicReg(0x133d, 0x2)) != RT_ERR_OK) - return retVal; - - for (i=0; i<0xffff; i++); - - if((retVal = rtl8367c_setAsicReg(0x6601, 0x0)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6602, 0x1401)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6600, 0xc0)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6601, 0x0)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6602, 0x1403)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_setAsicReg(0x6600, 0xc0)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x133d, 0x0)) != RT_ERR_OK) - return retVal; - - for (i=0; i<0xffff; i++); - - if((retVal = rtl8367c_setAsicReg(0x13c4, state)) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_PORT_ID; - } - else if(option == 2) - { - if ((retVal = rtl8367c_getAsicSdsReg(0, 3, 0, ®Value))!=RT_ERR_OK) - return retVal; - regValue |= 0x40; - if ((retVal = rtl8367c_setAsicSdsReg(0, 3, 0, regValue))!=RT_ERR_OK) - return retVal; - - for (i=0; i<0xffff; i++); - - regValue &= ~(0x40); - if ((retVal = rtl8367c_setAsicSdsReg(0, 3, 0, regValue))!=RT_ERR_OK) - return retVal; - - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getSdsLinkStatus - * Description: - * Get SGMII status - * Input: - * id - EXT ID - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -ret_t rtl8367c_getSdsLinkStatus(rtk_uint32 ext_id, rtk_uint32 *pSignalDetect, rtk_uint32 *pSync, rtk_uint32 *pLink) -{ - rtk_uint32 retVal, regValue, type, running = 0, retVal2; - - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 0; - break; - case 0x0652: - case 0x6368: - type = 1; - break; - case 0x0801: - case 0x6511: - type = 2; - break; - default: - return RT_ERR_FAILED; - } - - if(type == 0) - { - if (1 == ext_id) - { - if ((retVal = rtl8367c_getAsicRegBit(0x130c, 5, &running))!=RT_ERR_OK) - return retVal; - - if(running == 1) - { - if ((retVal = rtl8367c_setAsicRegBit(0x130c, 5, 0))!=RT_ERR_OK) - return retVal; - } - - retVal = rtl8367c_setAsicReg(0x6601, 0x003D); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6600, 0x0080); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_getAsicReg(0x6602, ®Value); - - if(running == 1) - { - if ((retVal2 = rtl8367c_setAsicRegBit(0x130c, 5, 1))!=RT_ERR_OK) - return retVal2; - } - - if(retVal != RT_ERR_OK) - return retVal; - - *pSignalDetect = (regValue & 0x0100) ? 1 : 0; - *pSync = (regValue & 0x0001) ? 1 : 0; - *pLink = (regValue & 0x0010) ? 1 : 0; - } - else - return RT_ERR_PORT_ID; - } - else if(type == 1) - { - if (1 == ext_id) - { - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x003D))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x0081))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicReg(0x6602, ®Value))!=RT_ERR_OK) - return retVal; - - *pSignalDetect = (regValue & 0x0100) ? 1 : 0; - *pSync = (regValue & 0x0001) ? 1 : 0; - *pLink = (regValue & 0x0010) ? 1 : 0; - } - else if (2 == ext_id) - { - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x003D))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x0080))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicReg(0x6602, ®Value))!=RT_ERR_OK) - return retVal; - - *pSignalDetect = (regValue & 0x0100) ? 1 : 0; - *pSync = (regValue & 0x0001) ? 1 : 0; - *pLink = (regValue & 0x0010) ? 1 : 0; - } - else - return RT_ERR_PORT_ID; - } - else if(type == 2) - { - if((retVal = rtl8367c_getAsicSdsReg(0, 30, 1, ®Value)) != RT_ERR_OK) - return retVal; - if((retVal = rtl8367c_getAsicSdsReg(0, 30, 1, ®Value)) != RT_ERR_OK) - return retVal; - - *pSignalDetect = (regValue & 0x0100) ? 1 : 0; - *pSync = (regValue & 0x0001) ? 1 : 0; - *pLink = (regValue & 0x0010) ? 1 : 0; - - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setSgmiiNway - * Description: - * Set SGMII Nway - * Input: - * ext_id - EXT ID - * state - SGMII Nway state - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -ret_t rtl8367c_setSgmiiNway(rtk_uint32 ext_id, rtk_uint32 state) -{ - rtk_uint32 retVal, regValue, type, running = 0, retVal2; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 0; - break; - case 0x0652: - case 0x6368: - type = 1; - break; - case 0x0801: - case 0x6511: - type = 2; - break; - default: - return RT_ERR_FAILED; - } - - if(type == 0) - { - if (1 == ext_id) - { - if ((retVal = rtl8367c_getAsicRegBit(0x130c, 5, &running))!=RT_ERR_OK) - return retVal; - - if(running == 1) - { - if ((retVal = rtl8367c_setAsicRegBit(0x130c, 5, 0))!=RT_ERR_OK) - return retVal; - } - - retVal = rtl8367c_setAsicReg(0x6601, 0x0002); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6600, 0x0080); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_getAsicReg(0x6602, ®Value); - - if(retVal == RT_ERR_OK) - { - if(state) - regValue |= 0x0200; - else - regValue &= ~0x0200; - - regValue |= 0x0100; - } - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6602, regValue); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6601, 0x0002); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6600, 0x00C0); - - if(running == 1) - { - if ((retVal2 = rtl8367c_setAsicRegBit(0x130c, 5, 1))!=RT_ERR_OK) - return retVal2; - } - - if(retVal != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_PORT_ID; - } - else if(type == 1) - { - if (1 == ext_id) - { - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x0002))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x0081))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicReg(0x6602, ®Value))!=RT_ERR_OK) - return retVal; - - if(state) - regValue |= 0x0200; - else - regValue &= ~0x0200; - - regValue |= 0x0100; - - if ((retVal = rtl8367c_setAsicReg(0x6602, regValue))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x0002))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x00C1))!=RT_ERR_OK) - return retVal; - } - else if (2 == ext_id) - { - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x0002))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x0080))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicReg(0x6602, ®Value))!=RT_ERR_OK) - return retVal; - - if(state) - regValue |= 0x0200; - else - regValue &= ~0x0200; - - regValue |= 0x0100; - - if ((retVal = rtl8367c_setAsicReg(0x6602, regValue))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x0002))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x00C0))!=RT_ERR_OK) - return retVal; - } - else - return RT_ERR_PORT_ID; - } - else if(type == 2) - { - if ((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®Value))!=RT_ERR_OK) - return retVal; - - if(state & 1) - regValue &= ~0x100; - else - regValue |= 0x100; - - if ((retVal = rtl8367c_setAsicSdsReg(0, 2, 0, regValue))!=RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getSgmiiNway - * Description: - * Get SGMII Nway - * Input: - * ext_id - EXT ID - * state - SGMII Nway state - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None. - */ -ret_t rtl8367c_getSgmiiNway(rtk_uint32 ext_id, rtk_uint32 *pState) -{ - rtk_uint32 retVal, regValue, type, running = 0, retVal2; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 0; - break; - case 0x0652: - case 0x6368: - type = 1; - break; - case 0x0801: - case 0x6511: - type = 2; - break; - default: - return RT_ERR_FAILED; - } - - if(type == 0) - { - if (1 == ext_id) - { - if ((retVal = rtl8367c_getAsicRegBit(0x130c, 5, &running))!=RT_ERR_OK) - return retVal; - - if(running == 1) - { - if ((retVal = rtl8367c_setAsicRegBit(0x130c, 5, 0))!=RT_ERR_OK) - return retVal; - } - - retVal = rtl8367c_setAsicReg(0x6601, 0x0002); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_setAsicReg(0x6600, 0x0080); - - if(retVal == RT_ERR_OK) - retVal = rtl8367c_getAsicReg(0x6602, ®Value); - - if(running == 1) - { - if ((retVal2 = rtl8367c_setAsicRegBit(0x130c, 5, 1))!=RT_ERR_OK) - return retVal2; - } - - if(retVal != RT_ERR_OK) - return retVal; - - if(regValue & 0x0200) - *pState = 1; - else - *pState = 0; - } - else - return RT_ERR_PORT_ID; - } - else if(type == 1) - { - if (1 == ext_id) - { - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x0002))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x0081))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicReg(0x6602, ®Value))!=RT_ERR_OK) - return retVal; - - if(regValue & 0x0200) - *pState = 1; - else - *pState = 0; - } - else if (2 == ext_id) - { - if ((retVal = rtl8367c_setAsicReg(0x6601, 0x0002))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicReg(0x6600, 0x0080))!=RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_getAsicReg(0x6602, ®Value))!=RT_ERR_OK) - return retVal; - - if(regValue & 0x0200) - *pState = 1; - else - *pState = 0; - } - else - return RT_ERR_PORT_ID; - } - else if(type == 2) - { - if ((retVal = rtl8367c_getAsicSdsReg(0, 2, 0, ®Value))!=RT_ERR_OK) - return retVal; - - if(regValue & 0x100) - *pState = 0; - else - *pState = 1; - } - - return RT_ERR_OK; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_portIsolation.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_portIsolation.c deleted file mode 100644 index e0b9db4bfb..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_portIsolation.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port isolation related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicPortIsolationPermittedPortmask - * Description: - * Set permitted port isolation portmask - * Input: - * port - Physical port number (0~10) - * permitPortmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicPortIsolationPermittedPortmask(rtk_uint32 port, rtk_uint32 permitPortmask) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if( permitPortmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicReg(RTL8367C_PORT_ISOLATION_PORT_MASK_REG(port), permitPortmask); -} -/* Function Name: - * rtl8367c_getAsicPortIsolationPermittedPortmask - * Description: - * Get permitted port isolation portmask - * Input: - * port - Physical port number (0~10) - * pPermitPortmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortIsolationPermittedPortmask(rtk_uint32 port, rtk_uint32 *pPermitPortmask) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicReg(RTL8367C_PORT_ISOLATION_PORT_MASK_REG(port), pPermitPortmask); -} -/* Function Name: - * rtl8367c_setAsicPortIsolationEfid - * Description: - * Set port isolation EFID - * Input: - * port - Physical port number (0~10) - * efid - EFID (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - Input parameter out of range - * Note: - * EFID is used in individual learning in filtering database - */ -ret_t rtl8367c_setAsicPortIsolationEfid(rtk_uint32 port, rtk_uint32 efid) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if( efid > RTL8367C_EFIDMAX) - return RT_ERR_OUT_OF_RANGE; - - return rtl8367c_setAsicRegBits(RTL8367C_PORT_EFID_REG(port), RTL8367C_PORT_EFID_MASK(port), efid); -} -/* Function Name: - * rtl8367c_getAsicPortIsolationEfid - * Description: - * Get port isolation EFID - * Input: - * port - Physical port number (0~10) - * pEfid - EFID (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortIsolationEfid(rtk_uint32 port, rtk_uint32 *pEfid) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_PORT_EFID_REG(port), RTL8367C_PORT_EFID_MASK(port), pEfid); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_qos.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_qos.c deleted file mode 100644 index 89c3c3e02e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_qos.c +++ /dev/null @@ -1,778 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Qos related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicPriorityDot1qRemapping - * Description: - * Set 802.1Q absolutely priority - * Input: - * srcpriority - Priority value - * priority - Absolute priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicPriorityDot1qRemapping(rtk_uint32 srcpriority, rtk_uint32 priority ) -{ - if((srcpriority > RTL8367C_PRIMAX) || (priority > RTL8367C_PRIMAX)) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_1Q_PRIORITY_REMAPPING_REG(srcpriority), RTL8367C_QOS_1Q_PRIORITY_REMAPPING_MASK(srcpriority),priority); -} -/* Function Name: - * rtl8367c_getAsicPriorityDot1qRemapping - * Description: - * Get 802.1Q absolutely priority - * Input: - * srcpriority - Priority value - * pPriority - Absolute priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPriorityDot1qRemapping(rtk_uint32 srcpriority, rtk_uint32 *pPriority ) -{ - if(srcpriority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_1Q_PRIORITY_REMAPPING_REG(srcpriority), RTL8367C_QOS_1Q_PRIORITY_REMAPPING_MASK(srcpriority), pPriority); -} -/* Function Name: - * rtl8367c_setAsicPriorityPortBased - * Description: - * Set port based priority - * Input: - * port - Physical port number (0~7) - * priority - Priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicPriorityPortBased(rtk_uint32 port, rtk_uint32 priority ) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(priority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_QOS_PORTBASED_PRIORITY_REG(port), RTL8367C_QOS_PORTBASED_PRIORITY_MASK(port), priority); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_QOS_PORTBASED_PRIORITY_CTRL2, 0x7 << ((port - 8) << 2), priority); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicPriorityPortBased - * Description: - * Get port based priority - * Input: - * port - Physical port number (0~7) - * pPriority - Priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPriorityPortBased(rtk_uint32 port, rtk_uint32 *pPriority ) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_QOS_PORTBASED_PRIORITY_REG(port), RTL8367C_QOS_PORTBASED_PRIORITY_MASK(port), pPriority); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_QOS_PORTBASED_PRIORITY_CTRL2, 0x7 << ((port - 8) << 2), pPriority); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicPriorityDscpBased - * Description: - * Set DSCP-based priority - * Input: - * dscp - DSCP value - * priority - Priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicPriorityDscpBased(rtk_uint32 dscp, rtk_uint32 priority ) -{ - if(priority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if(dscp > RTL8367C_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_DSCP_TO_PRIORITY_REG(dscp), RTL8367C_QOS_DSCP_TO_PRIORITY_MASK(dscp), priority); -} -/* Function Name: - * rtl8367c_getAsicPriorityDscpBased - * Description: - * Get DSCP-based priority - * Input: - * dscp - DSCP value - * pPriority - Priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicPriorityDscpBased(rtk_uint32 dscp, rtk_uint32 *pPriority ) -{ - if(dscp > RTL8367C_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_DSCP_TO_PRIORITY_REG(dscp), RTL8367C_QOS_DSCP_TO_PRIORITY_MASK(dscp), pPriority); -} -/* Function Name: - * rtl8367c_setAsicPriorityDecision - * Description: - * Set priority decision table - * Input: - * prisrc - Priority decision source - * decisionPri - Decision priority assignment - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * RT_ERR_QOS_SEL_PRI_SOURCE - Invalid priority decision source parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicPriorityDecision(rtk_uint32 index, rtk_uint32 prisrc, rtk_uint32 decisionPri) -{ - ret_t retVal; - - if(index >= PRIDEC_IDX_END ) - return RT_ERR_ENTRY_INDEX; - - if(prisrc >= PRIDEC_END ) - return RT_ERR_QOS_SEL_PRI_SOURCE; - - if(decisionPri > RTL8367C_DECISIONPRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - switch(index) - { - case PRIDEC_IDX0: - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_REG(prisrc), RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_MASK(prisrc), decisionPri))!= RT_ERR_OK) - return retVal; - break; - case PRIDEC_IDX1: - if((retVal = rtl8367c_setAsicRegBits(RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_REG(prisrc), RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_MASK(prisrc), decisionPri))!= RT_ERR_OK) - return retVal; - break; - default: - break; - }; - - return RT_ERR_OK; - - -} - -/* Function Name: - * rtl8367c_getAsicPriorityDecision - * Description: - * Get priority decision table - * Input: - * prisrc - Priority decision source - * pDecisionPri - Decision priority assignment - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_SEL_PRI_SOURCE - Invalid priority decision source parameter - * Note: - * None - */ -ret_t rtl8367c_getAsicPriorityDecision(rtk_uint32 index, rtk_uint32 prisrc, rtk_uint32* pDecisionPri) -{ - ret_t retVal; - - if(index >= PRIDEC_IDX_END ) - return RT_ERR_ENTRY_INDEX; - - if(prisrc >= PRIDEC_END ) - return RT_ERR_QOS_SEL_PRI_SOURCE; - - switch(index) - { - case PRIDEC_IDX0: - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_REG(prisrc), RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_MASK(prisrc), pDecisionPri))!= RT_ERR_OK) - return retVal; - break; - case PRIDEC_IDX1: - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_REG(prisrc), RTL8367C_QOS_INTERNAL_PRIORITY_DECISION2_MASK(prisrc), pDecisionPri))!= RT_ERR_OK) - return retVal; - break; - default: - break; - }; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtl8367c_setAsicPortPriorityDecisionIndex - * Description: - * Set priority decision index for each port - * Input: - * port - Physical port number (0~7) - * index - Table index - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_NUM - Invalid queue number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortPriorityDecisionIndex(rtk_uint32 port, rtk_uint32 index ) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(index >= PRIDEC_IDX_END) - return RT_ERR_ENTRY_INDEX; - - return rtl8367c_setAsicRegBit(RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_IDX_CTRL, port, index); -} -/* Function Name: - * rtl8367c_getAsicPortPriorityDecisionIndex - * Description: - * Get priority decision index for each port - * Input: - * port - Physical port number (0~7) - * pIndex - Table index - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortPriorityDecisionIndex(rtk_uint32 port, rtk_uint32 *pIndex ) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_QOS_INTERNAL_PRIORITY_DECISION_IDX_CTRL, port, pIndex); -} - -/* Function Name: - * rtl8367c_setAsicOutputQueueMappingIndex - * Description: - * Set output queue number for each port - * Input: - * port - Physical port number (0~7) - * index - Mapping table index - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_NUM - Invalid queue number - * Note: - * None - */ -ret_t rtl8367c_setAsicOutputQueueMappingIndex(rtk_uint32 port, rtk_uint32 index ) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(index >= RTL8367C_QUEUENO) - return RT_ERR_QUEUE_NUM; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_PORT_QUEUE_NUMBER_REG(port), RTL8367C_QOS_PORT_QUEUE_NUMBER_MASK(port), index); -} -/* Function Name: - * rtl8367c_getAsicOutputQueueMappingIndex - * Description: - * Get output queue number for each port - * Input: - * port - Physical port number (0~7) - * pIndex - Mapping table index - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicOutputQueueMappingIndex(rtk_uint32 port, rtk_uint32 *pIndex ) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_PORT_QUEUE_NUMBER_REG(port), RTL8367C_QOS_PORT_QUEUE_NUMBER_MASK(port), pIndex); -} -/* Function Name: - * rtl8367c_setAsicPriorityToQIDMappingTable - * Description: - * Set priority to QID mapping table parameters - * Input: - * index - Mapping table index - * priority - The priority value - * qid - Queue id - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QUEUE_ID - Invalid queue id - * RT_ERR_QUEUE_NUM - Invalid queue number - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicPriorityToQIDMappingTable(rtk_uint32 index, rtk_uint32 priority, rtk_uint32 qid ) -{ - if(index >= RTL8367C_QUEUENO) - return RT_ERR_QUEUE_NUM; - - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_1Q_PRIORITY_TO_QID_REG(index, priority), RTL8367C_QOS_1Q_PRIORITY_TO_QID_MASK(priority), qid); -} -/* Function Name: - * rtl8367c_getAsicPriorityToQIDMappingTable - * Description: - * Get priority to QID mapping table parameters - * Input: - * index - Mapping table index - * priority - The priority value - * pQid - Queue id - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QUEUE_NUM - Invalid queue number - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicPriorityToQIDMappingTable(rtk_uint32 index, rtk_uint32 priority, rtk_uint32* pQid) -{ - if(index >= RTL8367C_QUEUENO) - return RT_ERR_QUEUE_NUM; - - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_1Q_PRIORITY_TO_QID_REG(index, priority), RTL8367C_QOS_1Q_PRIORITY_TO_QID_MASK(priority), pQid); -} -/* Function Name: - * rtl8367c_setAsicRemarkingDot1pAbility - * Description: - * Set 802.1p remarking ability - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicRemarkingDot1pAbility(rtk_uint32 port, rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_PORT_MISC_CFG_REG(port), RTL8367C_1QREMARK_ENABLE_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicRemarkingDot1pAbility - * Description: - * Get 802.1p remarking ability - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRemarkingDot1pAbility(rtk_uint32 port, rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_PORT_MISC_CFG_REG(port), RTL8367C_1QREMARK_ENABLE_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicRemarkingDot1pParameter - * Description: - * Set 802.1p remarking parameter - * Input: - * priority - Priority value - * newPriority - New priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicRemarkingDot1pParameter(rtk_uint32 priority, rtk_uint32 newPriority ) -{ - if(priority > RTL8367C_PRIMAX || newPriority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_1Q_REMARK_REG(priority), RTL8367C_QOS_1Q_REMARK_MASK(priority), newPriority); -} -/* Function Name: - * rtl8367c_getAsicRemarkingDot1pParameter - * Description: - * Get 802.1p remarking parameter - * Input: - * priority - Priority value - * pNewPriority - New priority value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicRemarkingDot1pParameter(rtk_uint32 priority, rtk_uint32 *pNewPriority ) -{ - if(priority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_1Q_REMARK_REG(priority), RTL8367C_QOS_1Q_REMARK_MASK(priority), pNewPriority); -} - -/* Function Name: - * rtl8367c_setAsicRemarkingDot1pSrc - * Description: - * Set remarking source of 802.1p remarking. - * Input: - * type - remarking source - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - - * Note: - * The API can configure 802.1p remark functionality to map original DSCP value or internal - * priority to TX DSCP value. - */ -ret_t rtl8367c_setAsicRemarkingDot1pSrc(rtk_uint32 type) -{ - - if(type >= DOT1P_PRISEL_END ) - return RT_ERR_QOS_SEL_PRI_SOURCE; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_RMK_CFG_SEL_CTRL, RTL8367C_RMK_1Q_CFG_SEL_OFFSET, type); -} - - -/* Function Name: - * rtl8367c_getAsicRemarkingDot1pSrc - * Description: - * Get remarking source of 802.1p remarking. - * Output: - * pType - remarking source - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - - * Note: - * None - */ -ret_t rtl8367c_getAsicRemarkingDot1pSrc(rtk_uint32 *pType) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RMK_CFG_SEL_CTRL, RTL8367C_RMK_1Q_CFG_SEL_OFFSET, pType); -} - - - - - -/* Function Name: - * rtl8367c_setAsicRemarkingDscpAbility - * Description: - * Set DSCP remarking ability - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRemarkingDscpAbility(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REMARKING_CTRL_REG, RTL8367C_REMARKING_DSCP_ENABLE_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicRemarkingDscpAbility - * Description: - * Get DSCP remarking ability - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRemarkingDscpAbility(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REMARKING_CTRL_REG, RTL8367C_REMARKING_DSCP_ENABLE_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicRemarkingDscpParameter - * Description: - * Set DSCP remarking parameter - * Input: - * priority - Priority value - * newDscp - New DSCP value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_DSCP_VALUE - Invalid DSCP value - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicRemarkingDscpParameter(rtk_uint32 priority, rtk_uint32 newDscp ) -{ - if(priority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - if(newDscp > RTL8367C_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_DSCP_REMARK_REG(priority), RTL8367C_QOS_DSCP_REMARK_MASK(priority), newDscp); -} -/* Function Name: - * rtl8367c_getAsicRemarkingDscpParameter - * Description: - * Get DSCP remarking parameter - * Input: - * priority - Priority value - * pNewDscp - New DSCP value - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_getAsicRemarkingDscpParameter(rtk_uint32 priority, rtk_uint32* pNewDscp ) -{ - if(priority > RTL8367C_PRIMAX ) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_DSCP_REMARK_REG(priority), RTL8367C_QOS_DSCP_REMARK_MASK(priority), pNewDscp); -} - -/* Function Name: - * rtl8367c_setAsicRemarkingDscpSrc - * Description: - * Set remarking source of DSCP remarking. - * Input: - * type - remarking source - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - - * Note: - * The API can configure DSCP remark functionality to map original DSCP value or internal - * priority to TX DSCP value. - */ -ret_t rtl8367c_setAsicRemarkingDscpSrc(rtk_uint32 type) -{ - - if(type >= DSCP_PRISEL_END ) - return RT_ERR_QOS_SEL_PRI_SOURCE; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_RMK_CFG_SEL_CTRL, RTL8367C_RMK_DSCP_CFG_SEL_MASK, type); -} - - -/* Function Name: - * rtl8367c_getAsicRemarkingDscpSrc - * Description: - * Get remarking source of DSCP remarking. - * Output: - * pType - remarking source - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * RT_ERR_NULL_POINTER - input parameter may be null pointer - - * Note: - * None - */ -ret_t rtl8367c_getAsicRemarkingDscpSrc(rtk_uint32 *pType) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_RMK_CFG_SEL_CTRL, RTL8367C_RMK_DSCP_CFG_SEL_MASK, pType); -} - -/* Function Name: - * rtl8367c_setAsicRemarkingDscp2Dscp - * Description: - * Set DSCP to remarked DSCP mapping. - * Input: - * dscp - DSCP value - * rmkDscp - remarked DSCP value - * Output: - * None. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - Invalid unit id - * RT_ERR_QOS_DSCP_VALUE - Invalid dscp value - * Note: - * dscp parameter can be DSCP value or internal priority according to configuration of API - * dal_apollomp_qos_dscpRemarkSrcSel_set(), because DSCP remark functionality can map original DSCP - * value or internal priority to TX DSCP value. - */ -ret_t rtl8367c_setAsicRemarkingDscp2Dscp(rtk_uint32 dscp, rtk_uint32 rmkDscp) -{ - if((dscp > RTL8367C_DSCPMAX ) || (rmkDscp > RTL8367C_DSCPMAX)) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_DSCP_TO_DSCP_REG(dscp), RTL8367C_QOS_DSCP_TO_DSCP_MASK(dscp), rmkDscp); -} - -/* Function Name: - * rtl8367c_getAsicRemarkingDscp2Dscp - * Description: - * Get DSCP to remarked DSCP mapping. - * Input: - * dscp - DSCP value - * Output: - * pRmkDscp - remarked DSCP value - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_DSCP_VALUE - Invalid dscp value - * RT_ERR_NULL_POINTER - NULL pointer - * Note: - * None. - */ -ret_t rtl8367c_getAsicRemarkingDscp2Dscp(rtk_uint32 dscp, rtk_uint32 *pRmkDscp) -{ - if(dscp > RTL8367C_DSCPMAX) - return RT_ERR_QOS_DSCP_VALUE; - - return rtl8367c_getAsicRegBits(RTL8367C_QOS_DSCP_TO_DSCP_REG(dscp), RTL8367C_QOS_DSCP_TO_DSCP_MASK(dscp), pRmkDscp); - -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_rldp.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_rldp.c deleted file mode 100644 index 0309689d39..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_rldp.c +++ /dev/null @@ -1,674 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 42321 $ - * $Date: 2013-08-26 13:51:29 +0800 (週一, 26 八月 2013) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : RLDP related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicRldp - * Description: - * Set RLDP function enable/disable - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldp(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_ENABLE_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicRldp - * Description: - * Get RLDP function enable/disable - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldp(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_ENABLE_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicRldpEnable8051 - * Description: - * Set RLDP function handled by ASIC or 8051 - * Input: - * enabled - 1: enabled 8051, 0: disabled 8051 (RLDP is handled by ASIC) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpEnable8051(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_8051_ENABLE_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_setAsicRldrtl8367c_getAsicRldpEnable8051pEnable8051 - * Description: - * Get RLDP function handled by ASIC or 8051 - * Input: - * pEnabled - 1: enabled 8051, 0: disabled 8051 (RLDP is handled by ASIC) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpEnable8051(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_8051_ENABLE_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicRldpCompareRandomNumber - * Description: - * Set enable compare the random number field and seed field of RLDP frame - * Input: - * enabled - 1: enabled comparing random number, 0: disabled comparing random number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpCompareRandomNumber(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_COMP_ID_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicRldpCompareRandomNumber - * Description: - * Get enable compare the random number field and seed field of RLDP frame - * Input: - * pEnabled - 1: enabled comparing random number, 0: disabled comparing random number - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpCompareRandomNumber(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_COMP_ID_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicRldpIndicatorSource - * Description: - * Set buzzer and LED source when detecting a loop - * Input: - * src - 0: ASIC, 1: 8051 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpIndicatorSource(rtk_uint32 src) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_INDICATOR_SOURCE_OFFSET, src); -} -/* Function Name: - * rtl8367c_getAsicRldpIndicatorSource - * Description: - * Get buzzer and LED source when detecting a loop - * Input: - * pSrc - 0: ASIC, 1: 8051 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpIndicatorSource(rtk_uint32 *pSrc) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_INDICATOR_SOURCE_OFFSET, pSrc); -} -/* Function Name: - * rtl8367c_setAsicRldpCheckingStatePara - * Description: - * Set retry count and retry period of checking state - * Input: - * retryCount - 0~0xFF (times) - * retryPeriod - 0~0xFFFF (ms) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpCheckingStatePara(rtk_uint32 retryCount, rtk_uint32 retryPeriod) -{ - ret_t retVal; - - if(retryCount > 0xFF) - return RT_ERR_OUT_OF_RANGE; - if(retryPeriod > RTL8367C_REGDATAMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_RLDP_RETRY_COUNT_REG, RTL8367C_RLDP_RETRY_COUNT_CHKSTATE_MASK, retryCount); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicReg(RTL8367C_RLDP_RETRY_PERIOD_CHKSTATE_REG, retryPeriod); -} -/* Function Name: - * rtl8367c_getAsicRldpCheckingStatePara - * Description: - * Get retry count and retry period of checking state - * Input: - * pRetryCount - 0~0xFF (times) - * pRetryPeriod - 0~0xFFFF (ms) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpCheckingStatePara(rtk_uint32 *pRetryCount, rtk_uint32 *pRetryPeriod) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_RLDP_RETRY_COUNT_REG, RTL8367C_RLDP_RETRY_COUNT_CHKSTATE_MASK, pRetryCount); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_getAsicReg(RTL8367C_RLDP_RETRY_PERIOD_CHKSTATE_REG, pRetryPeriod); -} -/* Function Name: - * rtl8367c_setAsicRldpLoopStatePara - * Description: - * Set retry count and retry period of loop state - * Input: - * retryCount - 0~0xFF (times) - * retryPeriod - 0~0xFFFF (ms) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpLoopStatePara(rtk_uint32 retryCount, rtk_uint32 retryPeriod) -{ - ret_t retVal; - - if(retryCount > 0xFF) - return RT_ERR_OUT_OF_RANGE; - - if(retryPeriod > RTL8367C_REGDATAMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_RLDP_RETRY_COUNT_REG, RTL8367C_RLDP_RETRY_COUNT_LOOPSTATE_MASK, retryCount); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicReg(RTL8367C_RLDP_RETRY_PERIOD_LOOPSTATE_REG, retryPeriod); -} -/* Function Name: - * rtl8367c_getAsicRldpLoopStatePara - * Description: - * Get retry count and retry period of loop state - * Input: - * pRetryCount - 0~0xFF (times) - * pRetryPeriod - 0~0xFFFF (ms) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - input parameter out of range - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpLoopStatePara(rtk_uint32 *pRetryCount, rtk_uint32 *pRetryPeriod) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_RLDP_RETRY_COUNT_REG, RTL8367C_RLDP_RETRY_COUNT_LOOPSTATE_MASK, pRetryCount); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_getAsicReg(RTL8367C_RLDP_RETRY_PERIOD_LOOPSTATE_REG, pRetryPeriod); -} -/* Function Name: - * rtl8367c_setAsicRldpTxPortmask - * Description: - * Set portmask that send/forward RLDP frame - * Input: - * portmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpTxPortmask(rtk_uint32 portmask) -{ - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicReg(RTL8367C_RLDP_TX_PMSK_REG, portmask); -} -/* Function Name: - * rtl8367c_getAsicRldpTxPortmask - * Description: - * Get portmask that send/forward RLDP frame - * Input: - * pPortmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpTxPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_RLDP_TX_PMSK_REG, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicRldpMagicNum - * Description: - * Set Random seed of RLDP - * Input: - * seed - MAC - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpMagicNum(ether_addr_t seed) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - - accessPtr = (rtk_uint16*)&seed; - - for (i = 0; i < 3; i++) - { - regData = *accessPtr; - retVal = rtl8367c_setAsicReg(RTL8367C_RLDP_MAGIC_NUM_REG_BASE + i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - accessPtr++; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicRldpMagicNum - * Description: - * Get Random seed of RLDP - * Input: - * pSeed - MAC - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpMagicNum(ether_addr_t *pSeed) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - - accessPtr = (rtk_uint16*)pSeed; - - for(i = 0; i < 3; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_RLDP_MAGIC_NUM_REG_BASE + i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = regData; - accessPtr++; - } - - return retVal; -} - -/* Function Name: - * rtl8367c_getAsicRldpLoopedPortmask - * Description: - * Get looped portmask - * Input: - * pPortmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpLoopedPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_RLDP_LOOP_PMSK_REG, pPortmask); -} -/* Function Name: - * rtl8367c_getAsicRldpRandomNumber - * Description: - * Get Random number of RLDP - * Input: - * pRandNumber - MAC - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpRandomNumber(ether_addr_t *pRandNumber) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_int16 accessPtr[3]; - rtk_uint32 i; - - for(i = 0; i < 3; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_RLDP_RAND_NUM_REG_BASE+ i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - accessPtr[i] = regData; - } - - memcpy(pRandNumber, accessPtr, 6); - return retVal; -} -/* Function Name: - * rtl8367c_getAsicRldpLoopedPortmask - * Description: - * Get port number of looped pair - * Input: - * port - Physical port number (0~7) - * pLoopedPair - port (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpLoopedPortPair(rtk_uint32 port, rtk_uint32 *pLoopedPair) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicRegBits(RTL8367C_RLDP_LOOP_PORT_REG(port), RTL8367C_RLDP_LOOP_PORT_MASK(port), pLoopedPair); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_RLDP_LOOP_PORT_REG4 + ((port - 8) >> 1), RTL8367C_RLDP_LOOP_PORT_MASK(port), pLoopedPair); -} -/* Function Name: - * rtl8367c_setAsicRlppTrap8051 - * Description: - * Set trap RLPP packet to 8051 - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRlppTrap8051(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLPP_8051_TRAP_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicRlppTrap8051 - * Description: - * Get trap RLPP packet to 8051 - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRlppTrap8051(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLPP_8051_TRAP_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicRldpLeaveLoopedPortmask - * Description: - * Clear leaved looped portmask - * Input: - * portmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpLeaveLoopedPortmask(rtk_uint32 portmask) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_RLDP_RELEASED_INDICATOR, portmask); -} -/* Function Name: - * rtl8367c_getAsicRldpLeaveLoopedPortmask - * Description: - * Get leaved looped portmask - * Input: - * pPortmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpLeaveLoopedPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_RLDP_RELEASED_INDICATOR, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicRldpEnterLoopedPortmask - * Description: - * Clear enter loop portmask - * Input: - * portmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpEnterLoopedPortmask(rtk_uint32 portmask) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_RLDP_LOOPED_INDICATOR, portmask); -} -/* Function Name: - * rtl8367c_getAsicRldpEnterLoopedPortmask - * Description: - * Get enter loop portmask - * Input: - * pPortmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpEnterLoopedPortmask(rtk_uint32 *pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_RLDP_LOOPED_INDICATOR, pPortmask); -} - -/* Function Name: - * rtl8367c_setAsicRldpTriggerMode - * Description: - * Set trigger RLDP mode - * Input: - * mode - 1: Periodically, 0: SA moving - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicRldpTriggerMode(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_TRIGGER_MODE_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicRldpTriggerMode - * Description: - * Get trigger RLDP mode - * Input: - * pMode - - 1: Periodically, 0: SA moving - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldpTriggerMode(rtk_uint32 *pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_RLDP_CTRL0, RTL8367C_RLDP_TRIGGER_MODE_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicRldp8051Portmask - * Description: - * Set 8051/CPU configured looped portmask - * Input: - * portmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * Note: - * None - */ -ret_t rtl8367c_setAsicRldp8051Portmask(rtk_uint32 portmask) -{ - ret_t retVal; - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_RLDP_CTRL0_REG,RTL8367C_RLDP_8051_LOOP_PORTMSK_MASK,portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_RLDP_CTRL5,RTL8367C_RLDP_CTRL5_MASK,(portmask >> 8) & 7); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicRldp8051Portmask - * Description: - * Get 8051/CPU configured looped portmask - * Input: - * pPortmask - 0~0xFF - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicRldp8051Portmask(rtk_uint32 *pPortmask) -{ - rtk_uint32 tmpPmsk; - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_RLDP_CTRL0_REG,RTL8367C_RLDP_8051_LOOP_PORTMSK_MASK,&tmpPmsk); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask = tmpPmsk & 0xff; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_RLDP_CTRL5,RTL8367C_RLDP_CTRL5_MASK,&tmpPmsk); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask |= (tmpPmsk & 7) <<8; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_rma.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_rma.c deleted file mode 100644 index f297defa78..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_rma.c +++ /dev/null @@ -1,362 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 64716 $ - * $Date: 2015-12-31 16:31:55 +0800 (週四, 31 十二月 2015) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : RMA related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicRma - * Description: - * Set reserved multicast address for CPU trapping - * Input: - * index - reserved multicast LSB byte, 0x00~0x2F is available value - * pRmacfg - type of RMA for trapping frame type setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_setAsicRma(rtk_uint32 index, rtl8367c_rma_t* pRmacfg) -{ - rtk_uint32 regData = 0; - ret_t retVal; - - if(index > RTL8367C_RMAMAX) - return RT_ERR_RMA_ADDR; - - regData |= (pRmacfg->portiso_leaky & 0x0001); - regData |= ((pRmacfg->vlan_leaky & 0x0001) << 1); - regData |= ((pRmacfg->keep_format & 0x0001) << 2); - regData |= ((pRmacfg->trap_priority & 0x0007) << 3); - regData |= ((pRmacfg->discard_storm_filter & 0x0001) << 6); - regData |= ((pRmacfg->operation & 0x0003) << 7); - - if( (index >= 0x4 && index <= 0x7) || (index >= 0x9 && index <= 0x0C) || (0x0F == index)) - index = 0x04; - else if((index >= 0x13 && index <= 0x17) || (0x19 == index) || (index >= 0x1B && index <= 0x1f)) - index = 0x13; - else if(index >= 0x22 && index <= 0x2F) - index = 0x22; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, pRmacfg->trap_priority); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicReg(RTL8367C_REG_RMA_CTRL00+index, regData); -} -/* Function Name: - * rtl8367c_getAsicRma - * Description: - * Get reserved multicast address for CPU trapping - * Input: - * index - reserved multicast LSB byte, 0x00~0x2F is available value - * rmacfg - type of RMA for trapping frame type setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_getAsicRma(rtk_uint32 index, rtl8367c_rma_t* pRmacfg) -{ - ret_t retVal; - rtk_uint32 regData; - - if(index > RTL8367C_RMAMAX) - return RT_ERR_RMA_ADDR; - - if( (index >= 0x4 && index <= 0x7) || (index >= 0x9 && index <= 0x0C) || (0x0F == index)) - index = 0x04; - else if((index >= 0x13 && index <= 0x17) || (0x19 == index) || (index >= 0x1B && index <= 0x1f)) - index = 0x13; - else if(index >= 0x22 && index <= 0x2F) - index = 0x22; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_RMA_CTRL00+index, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->operation = ((regData >> 7) & 0x0003); - pRmacfg->discard_storm_filter = ((regData >> 6) & 0x0001); - pRmacfg->trap_priority = ((regData >> 3) & 0x0007); - pRmacfg->keep_format = ((regData >> 2) & 0x0001); - pRmacfg->vlan_leaky = ((regData >> 1) & 0x0001); - pRmacfg->portiso_leaky = (regData & 0x0001); - - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->trap_priority = regData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicRmaCdp - * Description: - * Set CDP(Cisco Discovery Protocol) for CPU trapping - * Input: - * pRmacfg - type of RMA for trapping frame type setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_setAsicRmaCdp(rtl8367c_rma_t* pRmacfg) -{ - rtk_uint32 regData = 0; - ret_t retVal; - - if(pRmacfg->operation >= RMAOP_END) - return RT_ERR_RMA_ACTION; - - if(pRmacfg->trap_priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - regData |= (pRmacfg->portiso_leaky & 0x0001); - regData |= ((pRmacfg->vlan_leaky & 0x0001) << 1); - regData |= ((pRmacfg->keep_format & 0x0001) << 2); - regData |= ((pRmacfg->trap_priority & 0x0007) << 3); - regData |= ((pRmacfg->discard_storm_filter & 0x0001) << 6); - regData |= ((pRmacfg->operation & 0x0003) << 7); - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, pRmacfg->trap_priority); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicReg(RTL8367C_REG_RMA_CTRL_CDP, regData); -} -/* Function Name: - * rtl8367c_getAsicRmaCdp - * Description: - * Get CDP(Cisco Discovery Protocol) for CPU trapping - * Input: - * None - * Output: - * pRmacfg - type of RMA for trapping frame type setting - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_getAsicRmaCdp(rtl8367c_rma_t* pRmacfg) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_RMA_CTRL_CDP, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->operation = ((regData >> 7) & 0x0003); - pRmacfg->discard_storm_filter = ((regData >> 6) & 0x0001); - pRmacfg->trap_priority = ((regData >> 3) & 0x0007); - pRmacfg->keep_format = ((regData >> 2) & 0x0001); - pRmacfg->vlan_leaky = ((regData >> 1) & 0x0001); - pRmacfg->portiso_leaky = (regData & 0x0001); - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->trap_priority = regData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicRmaCsstp - * Description: - * Set CSSTP(Cisco Shared Spanning Tree Protocol) for CPU trapping - * Input: - * pRmacfg - type of RMA for trapping frame type setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_setAsicRmaCsstp(rtl8367c_rma_t* pRmacfg) -{ - rtk_uint32 regData = 0; - ret_t retVal; - - if(pRmacfg->operation >= RMAOP_END) - return RT_ERR_RMA_ACTION; - - if(pRmacfg->trap_priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - regData |= (pRmacfg->portiso_leaky & 0x0001); - regData |= ((pRmacfg->vlan_leaky & 0x0001) << 1); - regData |= ((pRmacfg->keep_format & 0x0001) << 2); - regData |= ((pRmacfg->trap_priority & 0x0007) << 3); - regData |= ((pRmacfg->discard_storm_filter & 0x0001) << 6); - regData |= ((pRmacfg->operation & 0x0003) << 7); - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, pRmacfg->trap_priority); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicReg(RTL8367C_REG_RMA_CTRL_CSSTP, regData); -} -/* Function Name: - * rtl8367c_getAsicRmaCsstp - * Description: - * Get CSSTP(Cisco Shared Spanning Tree Protocol) for CPU trapping - * Input: - * None - * Output: - * pRmacfg - type of RMA for trapping frame type setting - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_getAsicRmaCsstp(rtl8367c_rma_t* pRmacfg) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_RMA_CTRL_CSSTP, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->operation = ((regData >> 7) & 0x0003); - pRmacfg->discard_storm_filter = ((regData >> 6) & 0x0001); - pRmacfg->trap_priority = ((regData >> 3) & 0x0007); - pRmacfg->keep_format = ((regData >> 2) & 0x0001); - pRmacfg->vlan_leaky = ((regData >> 1) & 0x0001); - pRmacfg->portiso_leaky = (regData & 0x0001); - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->trap_priority = regData; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicRmaLldp - * Description: - * Set LLDP for CPU trapping - * Input: - * pRmacfg - type of RMA for trapping frame type setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_setAsicRmaLldp(rtk_uint32 enabled, rtl8367c_rma_t* pRmacfg) -{ - rtk_uint32 regData = 0; - ret_t retVal; - - if(enabled > 1) - return RT_ERR_ENABLE; - - if(pRmacfg->operation >= RMAOP_END) - return RT_ERR_RMA_ACTION; - - if(pRmacfg->trap_priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_RMA_LLDP_EN, RTL8367C_RMA_LLDP_EN_OFFSET,enabled); - if(retVal != RT_ERR_OK) - return retVal; - - regData |= (pRmacfg->portiso_leaky & 0x0001); - regData |= ((pRmacfg->vlan_leaky & 0x0001) << 1); - regData |= ((pRmacfg->keep_format & 0x0001) << 2); - regData |= ((pRmacfg->trap_priority & 0x0007) << 3); - regData |= ((pRmacfg->discard_storm_filter & 0x0001) << 6); - regData |= ((pRmacfg->operation & 0x0003) << 7); - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, pRmacfg->trap_priority); - if(retVal != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicReg(RTL8367C_REG_RMA_CTRL_LLDP, regData); -} -/* Function Name: - * rtl8367c_getAsicRmaLldp - * Description: - * Get LLDP for CPU trapping - * Input: - * None - * Output: - * pRmacfg - type of RMA for trapping frame type setting - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_RMA_ADDR - Invalid RMA address index - * Note: - * None - */ -ret_t rtl8367c_getAsicRmaLldp(rtk_uint32 *pEnabled, rtl8367c_rma_t* pRmacfg) -{ - ret_t retVal; - rtk_uint32 regData; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_RMA_LLDP_EN, RTL8367C_RMA_LLDP_EN_OFFSET,pEnabled); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_REG_RMA_CTRL_LLDP, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->operation = ((regData >> 7) & 0x0003); - pRmacfg->discard_storm_filter = ((regData >> 6) & 0x0001); - pRmacfg->trap_priority = ((regData >> 3) & 0x0007); - pRmacfg->keep_format = ((regData >> 2) & 0x0001); - pRmacfg->vlan_leaky = ((regData >> 1) & 0x0001); - pRmacfg->portiso_leaky = (regData & 0x0001); - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_RMA_CTRL00, RTL8367C_TRAP_PRIORITY_MASK, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - pRmacfg->trap_priority = regData; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_scheduling.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_scheduling.c deleted file mode 100644 index 8ebd6796dc..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_scheduling.c +++ /dev/null @@ -1,525 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Packet Scheduling related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicLeakyBucketParameter - * Description: - * Set Leaky Bucket Paramters - * Input: - * tick - Tick is used for time slot size unit - * token - Token is used for adding budget in each time slot - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_TICK - Invalid TICK - * RT_ERR_TOKEN - Invalid TOKEN - * Note: - * None - */ -ret_t rtl8367c_setAsicLeakyBucketParameter(rtk_uint32 tick, rtk_uint32 token) -{ - ret_t retVal; - - if(tick > 0xFF) - return RT_ERR_TICK; - - if(token > 0xFF) - return RT_ERR_TOKEN; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_LEAKY_BUCKET_TICK_REG, RTL8367C_LEAKY_BUCKET_TICK_MASK, tick); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_LEAKY_BUCKET_TOKEN_REG, RTL8367C_LEAKY_BUCKET_TOKEN_MASK, token); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicLeakyBucketParameter - * Description: - * Get Leaky Bucket Paramters - * Input: - * tick - Tick is used for time slot size unit - * token - Token is used for adding budget in each time slot - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicLeakyBucketParameter(rtk_uint32 *tick, rtk_uint32 *token) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_LEAKY_BUCKET_TICK_REG, RTL8367C_LEAKY_BUCKET_TICK_MASK, tick); - - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_LEAKY_BUCKET_TOKEN_REG, RTL8367C_LEAKY_BUCKET_TOKEN_MASK, token); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicAprMeter - * Description: - * Set per-port per-queue APR shared meter index - * Input: - * port - Physical port number (0~10) - * qid - Queue id - * apridx - dedicated shared meter index for APR (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * None - */ -ret_t rtl8367c_setAsicAprMeter(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 apridx) -{ - ret_t retVal; - rtk_uint32 regAddr; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - if(apridx > RTL8367C_PORT_QUEUE_METER_INDEX_MAX) - return RT_ERR_FILTER_METER_ID; - - if(port < 8) - retVal = rtl8367c_setAsicRegBits(RTL8367C_SCHEDULE_PORT_APR_METER_REG(port, qid), RTL8367C_SCHEDULE_PORT_APR_METER_MASK(qid), apridx); - else { - regAddr = RTL8367C_REG_SCHEDULE_PORT8_APR_METER_CTRL0 + ((port-8) << 1) + (qid / 5); - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_SCHEDULE_PORT_APR_METER_MASK(qid), apridx); - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicAprMeter - * Description: - * Get per-port per-queue APR shared meter index - * Input: - * port - Physical port number (0~10) - * qid - Queue id - * apridx - dedicated shared meter index for APR (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_getAsicAprMeter(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 *apridx) -{ - ret_t retVal; - rtk_uint32 regAddr; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - if(port < 8) - retVal = rtl8367c_getAsicRegBits(RTL8367C_SCHEDULE_PORT_APR_METER_REG(port, qid), RTL8367C_SCHEDULE_PORT_APR_METER_MASK(qid), apridx); - else { - regAddr = RTL8367C_REG_SCHEDULE_PORT8_APR_METER_CTRL0 + ((port-8) << 1) + (qid / 5); - retVal = rtl8367c_getAsicRegBits(regAddr, RTL8367C_SCHEDULE_PORT_APR_METER_MASK(qid), apridx); - } - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicAprEnable - * Description: - * Set per-port APR enable - * Input: - * port - Physical port number (0~7) - * aprEnable - APR enable seting 1:enable 0:disable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicAprEnable(rtk_uint32 port, rtk_uint32 aprEnable) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_SCHEDULE_APR_CTRL_REG, RTL8367C_SCHEDULE_APR_CTRL_OFFSET(port), aprEnable); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicAprEnable - * Description: - * Get per-port APR enable - * Input: - * port - Physical port number (0~7) - * aprEnable - APR enable seting 1:enable 0:disable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicAprEnable(rtk_uint32 port, rtk_uint32 *aprEnable) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_SCHEDULE_APR_CTRL_REG, RTL8367C_SCHEDULE_APR_CTRL_OFFSET(port), aprEnable); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicWFQWeight - * Description: - * Set weight of a queue - * Input: - * port - Physical port number (0~10) - * qid - The queue ID wanted to set - * qWeight - The weight value wanted to set (valid:0~127) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * RT_ERR_QOS_QUEUE_WEIGHT - Invalid queue weight - * Note: - * None - */ -ret_t rtl8367c_setAsicWFQWeight(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 qWeight) -{ - ret_t retVal; - - /* Invalid input parameter */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - if(qWeight > RTL8367C_QWEIGHTMAX && qid > 0) - return RT_ERR_QOS_QUEUE_WEIGHT; - - retVal = rtl8367c_setAsicReg(RTL8367C_SCHEDULE_PORT_QUEUE_WFQ_WEIGHT_REG(port, qid), qWeight); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicWFQWeight - * Description: - * Get weight of a queue - * Input: - * port - Physical port number (0~10) - * qid - The queue ID wanted to set - * qWeight - The weight value wanted to set (valid:0~127) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_getAsicWFQWeight(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 *qWeight) -{ - ret_t retVal; - - - /* Invalid input parameter */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - - retVal = rtl8367c_getAsicReg(RTL8367C_SCHEDULE_PORT_QUEUE_WFQ_WEIGHT_REG(port, qid), qWeight); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicWFQBurstSize - * Description: - * Set WFQ leaky bucket burst size - * Input: - * burstsize - Leaky bucket burst size, unit byte - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicWFQBurstSize(rtk_uint32 burstsize) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_SCHEDULE_WFQ_BURST_SIZE_REG, burstsize); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicWFQBurstSize - * Description: - * Get WFQ leaky bucket burst size - * Input: - * burstsize - Leaky bucket burst size, unit byte - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicWFQBurstSize(rtk_uint32 *burstsize) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_SCHEDULE_WFQ_BURST_SIZE_REG, burstsize); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicQueueType - * Description: - * Set type of a queue - * Input: - * port - Physical port number (0~10) - * qid - The queue ID wanted to set - * queueType - The specified queue type. 0b0: Strict priority, 0b1: WFQ - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_setAsicQueueType(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 queueType) -{ - ret_t retVal; - - /* Invalid input parameter */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - /* Set Related Registers */ - retVal = rtl8367c_setAsicRegBit(RTL8367C_SCHEDULE_QUEUE_TYPE_REG(port), RTL8367C_SCHEDULE_QUEUE_TYPE_OFFSET(port, qid),queueType); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicQueueType - * Description: - * Get type of a queue - * Input: - * port - Physical port number (0~7) - * qid - The queue ID wanted to set - * queueType - The specified queue type. 0b0: Strict priority, 0b1: WFQ - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QUEUE_ID - Invalid queue id - * Note: - * None - */ -ret_t rtl8367c_getAsicQueueType(rtk_uint32 port, rtk_uint32 qid, rtk_uint32 *queueType) -{ - ret_t retVal; - - /* Invalid input parameter */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(qid > RTL8367C_QIDMAX) - return RT_ERR_QUEUE_ID; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_SCHEDULE_QUEUE_TYPE_REG(port), RTL8367C_SCHEDULE_QUEUE_TYPE_OFFSET(port, qid),queueType); - - return retVal; -} -/* Function Name: - * rtl8367c_setAsicPortEgressRate - * Description: - * Set per-port egress rate - * Input: - * port - Physical port number (0~10) - * rate - Egress rate - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QOS_EBW_RATE - Invalid bandwidth/rate - * Note: - * None - */ -ret_t rtl8367c_setAsicPortEgressRate(rtk_uint32 port, rtk_uint32 rate) -{ - ret_t retVal; - rtk_uint32 regAddr, regData; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(rate > RTL8367C_QOS_GRANULARTY_MAX) - return RT_ERR_QOS_EBW_RATE; - - regAddr = RTL8367C_PORT_EGRESSBW_LSB_REG(port); - regData = RTL8367C_QOS_GRANULARTY_LSB_MASK & rate; - - retVal = rtl8367c_setAsicReg(regAddr, regData); - - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_PORT_EGRESSBW_MSB_REG(port); - regData = (RTL8367C_QOS_GRANULARTY_MSB_MASK & rate) >> RTL8367C_QOS_GRANULARTY_MSB_OFFSET; - - retVal = rtl8367c_setAsicRegBits(regAddr, RTL8367C_PORT6_EGRESSBW_CTRL1_MASK, regData); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicPortEgressRate - * Description: - * Get per-port egress rate - * Input: - * port - Physical port number (0~10) - * rate - Egress rate - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortEgressRate(rtk_uint32 port, rtk_uint32 *rate) -{ - ret_t retVal; - rtk_uint32 regAddr, regData,regData2; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - regAddr = RTL8367C_PORT_EGRESSBW_LSB_REG(port); - - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_PORT_EGRESSBW_MSB_REG(port); - retVal = rtl8367c_getAsicRegBits(regAddr, RTL8367C_PORT6_EGRESSBW_CTRL1_MASK, ®Data2); - if(retVal != RT_ERR_OK) - return retVal; - - *rate = regData | (regData2 << RTL8367C_QOS_GRANULARTY_MSB_OFFSET); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicPortEgressRateIfg - * Description: - * Set per-port egress rate calculate include/exclude IFG - * Input: - * ifg - 1:include IFG 0:exclude IFG - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicPortEgressRateIfg(rtk_uint32 ifg) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_SCHEDULE_WFQ_CTRL, RTL8367C_SCHEDULE_WFQ_CTRL_OFFSET, ifg); - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicPortEgressRateIfg - * Description: - * Get per-port egress rate calculate include/exclude IFG - * Input: - * ifg - 1:include IFG 0:exclude IFG - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicPortEgressRateIfg(rtk_uint32 *ifg) -{ - ret_t retVal; - - retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_SCHEDULE_WFQ_CTRL, RTL8367C_SCHEDULE_WFQ_CTRL_OFFSET, ifg); - - return retVal; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_storm.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_storm.c deleted file mode 100644 index a29f64769d..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_storm.c +++ /dev/null @@ -1,851 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Storm control filtering related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicStormFilterBroadcastEnable - * Description: - * Set per-port broadcast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterBroadcastEnable(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_STORM_BCAST_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicStormFilterBroadcastEnable - * Description: - * Get per-port broadcast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterBroadcastEnable(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_STORM_BCAST_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicStormFilterBroadcastMeter - * Description: - * Set per-port broadcast storm filter meter - * Input: - * port - Physical port number (0~7) - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterBroadcastMeter(rtk_uint32 port, rtk_uint32 meter) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_STORM_BCAST_METER_CTRL_REG(port), RTL8367C_STORM_BCAST_METER_CTRL_MASK(port), meter); -} -/* Function Name: - * rtl8367c_getAsicStormFilterBroadcastMeter - * Description: - * Get per-port broadcast storm filter meter - * Input: - * port - Physical port number (0~7) - * pMeter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterBroadcastMeter(rtk_uint32 port, rtk_uint32 *pMeter) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_STORM_BCAST_METER_CTRL_REG(port), RTL8367C_STORM_BCAST_METER_CTRL_MASK(port), pMeter); -} -/* Function Name: - * rtl8367c_setAsicStormFilterMulticastEnable - * Description: - * Set per-port multicast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterMulticastEnable(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_STORM_MCAST_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicStormFilterMulticastEnable - * Description: - * Get per-port multicast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterMulticastEnable(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_STORM_MCAST_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicStormFilterMulticastMeter - * Description: - * Set per-port multicast storm filter meter - * Input: - * port - Physical port number (0~7) - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterMulticastMeter(rtk_uint32 port, rtk_uint32 meter) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_STORM_MCAST_METER_CTRL_REG(port), RTL8367C_STORM_MCAST_METER_CTRL_MASK(port), meter); -} -/* Function Name: - * rtl8367c_getAsicStormFilterMulticastMeter - * Description: - * Get per-port multicast storm filter meter - * Input: - * port - Physical port number (0~7) - * pMeter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterMulticastMeter(rtk_uint32 port, rtk_uint32 *pMeter) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_STORM_MCAST_METER_CTRL_REG(port), RTL8367C_STORM_MCAST_METER_CTRL_MASK(port), pMeter); -} -/* Function Name: - * rtl8367c_setAsicStormFilterUnknownMulticastEnable - * Description: - * Set per-port unknown multicast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterUnknownMulticastEnable(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_STORM_UNKNOWN_MCAST_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicStormFilterUnknownMulticastEnable - * Description: - * Get per-port unknown multicast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterUnknownMulticastEnable(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_STORM_UNKNOWN_MCAST_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicStormFilterUnknownMulticastMeter - * Description: - * Set per-port unknown multicast storm filter meter - * Input: - * port - Physical port number (0~7) - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterUnknownMulticastMeter(rtk_uint32 port, rtk_uint32 meter) -{ - ret_t retVal; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_STORM_UNMC_METER_CTRL_REG(port), RTL8367C_STORM_UNMC_METER_CTRL_MASK(port), meter); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_UNMC_METER_CTRL4 + ((port - 8) >> 1), RTL8367C_STORM_UNMC_METER_CTRL_MASK(port), meter); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicStormFilterUnknownMulticastMeter - * Description: - * Get per-port unknown multicast storm filter meter - * Input: - * port - Physical port number (0~7) - * pMeter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterUnknownMulticastMeter(rtk_uint32 port, rtk_uint32 *pMeter) -{ - ret_t retVal; - - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_STORM_UNMC_METER_CTRL_REG(port), RTL8367C_STORM_UNMC_METER_CTRL_MASK(port), pMeter); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_UNMC_METER_CTRL4 + ((port - 8) >> 1), RTL8367C_STORM_UNMC_METER_CTRL_MASK(port), pMeter); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicStormFilterUnknownUnicastEnable - * Description: - * Set per-port unknown unicast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterUnknownUnicastEnable(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_STORM_UNKNOWN_UCAST_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicStormFilterUnknownUnicastEnable - * Description: - * get per-port unknown unicast storm filter enable/disable - * Input: - * port - Physical port number (0~7) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterUnknownUnicastEnable(rtk_uint32 port, rtk_uint32 *pEnabled) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_STORM_UNKNOWN_UCAST_REG, port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicStormFilterUnknownUnicastMeter - * Description: - * Set per-port unknown unicast storm filter meter - * Input: - * port - Physical port number (0~7) - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterUnknownUnicastMeter(rtk_uint32 port, rtk_uint32 meter) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_STORM_UNDA_METER_CTRL_REG(port), RTL8367C_STORM_UNDA_METER_CTRL_MASK(port), meter); -} -/* Function Name: - * rtl8367c_getAsicStormFilterUnknownUnicastMeter - * Description: - * Get per-port unknown unicast storm filter meter - * Input: - * port - Physical port number (0~7) - * pMeter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterUnknownUnicastMeter(rtk_uint32 port, rtk_uint32 *pMeter) -{ - if(port >= RTL8367C_PORTNO) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_STORM_UNDA_METER_CTRL_REG(port), RTL8367C_STORM_UNDA_METER_CTRL_MASK(port), pMeter); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtBroadcastMeter - * Description: - * Set extension broadcast storm filter meter - * Input: - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtBroadcastMeter(rtk_uint32 meter) -{ - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG0, RTL8367C_BC_STORM_EXT_METERIDX_MASK, meter); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtBroadcastMeter - * Description: - * get extension broadcast storm filter meter - * Input: - * None - * Output: - * pMeter - meter index (0~31) - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtBroadcastMeter(rtk_uint32 *pMeter) -{ - if(NULL == pMeter) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG0, RTL8367C_BC_STORM_EXT_METERIDX_MASK, pMeter); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtMulticastMeter - * Description: - * Set extension multicast storm filter meter - * Input: - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtMulticastMeter(rtk_uint32 meter) -{ - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG0, RTL8367C_MC_STORM_EXT_METERIDX_MASK, meter); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtMulticastMeter - * Description: - * get extension multicast storm filter meter - * Input: - * None - * Output: - * pMeter - meter index (0~31) - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtMulticastMeter(rtk_uint32 *pMeter) -{ - if(NULL == pMeter) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG0, RTL8367C_MC_STORM_EXT_METERIDX_MASK, pMeter); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtUnknownMulticastMeter - * Description: - * Set extension unknown multicast storm filter meter - * Input: - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtUnknownMulticastMeter(rtk_uint32 meter) -{ - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG1, RTL8367C_UNMC_STORM_EXT_METERIDX_MASK, meter); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtUnknownMulticastMeter - * Description: - * get extension unknown multicast storm filter meter - * Input: - * None - * Output: - * pMeter - meter index (0~31) - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtUnknownMulticastMeter(rtk_uint32 *pMeter) -{ - if(NULL == pMeter) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG1, RTL8367C_UNMC_STORM_EXT_METERIDX_MASK, pMeter); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtUnknownUnicastMeter - * Description: - * Set extension unknown unicast storm filter meter - * Input: - * meter - meter index (0~31) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_FILTER_METER_ID - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtUnknownUnicastMeter(rtk_uint32 meter) -{ - if(meter > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG1, RTL8367C_UNUC_STORM_EXT_METERIDX_MASK, meter); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtUnknownUnicastMeter - * Description: - * get extension unknown unicast storm filter meter - * Input: - * None - * Output: - * pMeter - meter index (0~31) - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Invalid meter index - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtUnknownUnicastMeter(rtk_uint32 *pMeter) -{ - if(NULL == pMeter) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_EXT_MTRIDX_CFG1, RTL8367C_UNUC_STORM_EXT_METERIDX_MASK, pMeter); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtBroadcastEnable - * Description: - * Set extension broadcast storm filter state - * Input: - * enabled - state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtBroadcastEnable(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_BCAST_EXT_EN_OFFSET, enabled); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtBroadcastEnable - * Description: - * Get extension broadcast storm filter state - * Input: - * None - * Output: - * pEnabled - state - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtBroadcastEnable(rtk_uint32 *pEnabled) -{ - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_BCAST_EXT_EN_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtMulticastEnable - * Description: - * Set extension multicast storm filter state - * Input: - * enabled - state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtMulticastEnable(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_MCAST_EXT_EN_OFFSET, enabled); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtMulticastEnable - * Description: - * Get extension multicast storm filter state - * Input: - * None - * Output: - * pEnabled - state - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtMulticastEnable(rtk_uint32 *pEnabled) -{ - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_MCAST_EXT_EN_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtUnknownMulticastEnable - * Description: - * Set extension unknown multicast storm filter state - * Input: - * enabled - state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtUnknownMulticastEnable(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_UNKNOWN_MCAST_EXT_EN_OFFSET, enabled); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtUnknownMulticastEnable - * Description: - * Get extension unknown multicast storm filter state - * Input: - * None - * Output: - * pEnabled - state - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtUnknownMulticastEnable(rtk_uint32 *pEnabled) -{ - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_UNKNOWN_MCAST_EXT_EN_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtUnknownUnicastEnable - * Description: - * Set extension unknown unicast storm filter state - * Input: - * enabled - state - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtUnknownUnicastEnable(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_UNKNOWN_UCAST_EXT_EN_OFFSET, enabled); -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtUnknownUnicastEnable - * Description: - * Get extension unknown unicast storm filter state - * Input: - * None - * Output: - * pEnabled - state - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtUnknownUnicastEnable(rtk_uint32 *pEnabled) -{ - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_UNKNOWN_UCAST_EXT_EN_OFFSET, pEnabled); -} - -/* Function Name: - * rtl8367c_setAsicStormFilterExtEnablePortMask - * Description: - * Set extension storm filter port mask - * Input: - * portmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicStormFilterExtEnablePortMask(rtk_uint32 portmask) -{ - ret_t retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_EXT_EN_PORTMASK_MASK, portmask & 0x3FF); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_EXT_EN_PORTMASK_EXT_MASK, (portmask >> 10)&1); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicStormFilterExtEnablePortMask - * Description: - * Get extension storm filter port mask - * Input: - * portmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getAsicStormFilterExtEnablePortMask(rtk_uint32 *pPortmask) -{ - rtk_uint32 tmpPmsk; - ret_t retVal; - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_EXT_EN_PORTMASK_MASK, &tmpPmsk); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask = tmpPmsk & 0x3ff; - - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_STORM_EXT_CFG, RTL8367C_STORM_EXT_EN_PORTMASK_EXT_MASK, &tmpPmsk); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask |= (tmpPmsk & 1) << 10; - - return RT_ERR_OK; -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_svlan.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_svlan.c deleted file mode 100644 index f19ceba5a9..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_svlan.c +++ /dev/null @@ -1,1003 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : SVLAN related functions - * - */ -#include - -#include - -static void _rtl8367c_svlanConfStUser2Smi( rtl8367c_svlan_memconf_t *pUserSt, rtk_uint16 *pSmiSt) -{ - pSmiSt[0] |= (pUserSt->vs_member & 0x00FF); - pSmiSt[0] |= (pUserSt->vs_untag & 0x00FF) << 8; - - pSmiSt[1] |= (pUserSt->vs_fid_msti & 0x000F); - pSmiSt[1] |= (pUserSt->vs_priority & 0x0007) << 4; - pSmiSt[1] |= (pUserSt->vs_force_fid & 0x0001) << 7; - - pSmiSt[2] |= (pUserSt->vs_svid & 0x0FFF); - pSmiSt[2] |= (pUserSt->vs_efiden & 0x0001) << 12; - pSmiSt[2] |= (pUserSt->vs_efid & 0x0007) << 13; - - pSmiSt[3] |= ((pUserSt->vs_member & 0x0700) >> 8); - pSmiSt[3] |= ((pUserSt->vs_untag & 0x0700) >> 8) << 3; -} - -static void _rtl8367c_svlanConfStSmi2User( rtl8367c_svlan_memconf_t *pUserSt, rtk_uint16 *pSmiSt) -{ - - pUserSt->vs_member = (pSmiSt[0] & 0x00FF) | ((pSmiSt[3] & 0x0007) << 8); - pUserSt->vs_untag = ((pSmiSt[0] & 0xFF00) >> 8) | (((pSmiSt[3] & 0x0038) >> 3) << 8); - - pUserSt->vs_fid_msti = (pSmiSt[1] & 0x000F); - pUserSt->vs_priority = (pSmiSt[1] & 0x0070) >> 4; - pUserSt->vs_force_fid = (pSmiSt[1] & 0x0080) >> 7; - - pUserSt->vs_svid = (pSmiSt[2] & 0x0FFF); - pUserSt->vs_efiden = (pSmiSt[2] & 0x1000) >> 12; - pUserSt->vs_efid = (pSmiSt[2] & 0xE000) >> 13; -} - -static void _rtl8367c_svlanMc2sStUser2Smi(rtl8367c_svlan_mc2s_t *pUserSt, rtk_uint16 *pSmiSt) -{ - pSmiSt[0] |= (pUserSt->svidx & 0x003F); - pSmiSt[0] |= (pUserSt->format & 0x0001) << 6; - pSmiSt[0] |= (pUserSt->valid & 0x0001) << 7; - - pSmiSt[1] = (rtk_uint16)(pUserSt->smask & 0x0000FFFF); - pSmiSt[2] = (rtk_uint16)((pUserSt->smask & 0xFFFF0000) >> 16); - - pSmiSt[3] = (rtk_uint16)(pUserSt->sdata & 0x0000FFFF); - pSmiSt[4] = (rtk_uint16)((pUserSt->sdata & 0xFFFF0000) >> 16); -} - -static void _rtl8367c_svlanMc2sStSmi2User(rtl8367c_svlan_mc2s_t *pUserSt, rtk_uint16 *pSmiSt) -{ - pUserSt->svidx = (pSmiSt[0] & 0x003F); - pUserSt->format = (pSmiSt[0] & 0x0040) >> 6; - pUserSt->valid = (pSmiSt[0] & 0x0080) >> 7; - - pUserSt->smask = pSmiSt[1] | (pSmiSt[2] << 16); - pUserSt->sdata = pSmiSt[3] | (pSmiSt[4] << 16); -} - -static void _rtl8367c_svlanSp2cStUser2Smi(rtl8367c_svlan_s2c_t *pUserSt, rtk_uint16 *pSmiSt) -{ - pSmiSt[0] |= (pUserSt->dstport & 0x0007); - pSmiSt[0] |= (pUserSt->svidx & 0x003F) << 3; - pSmiSt[0] |= ((pUserSt->dstport & 0x0008) >> 3) << 9; - - pSmiSt[1] |= (pUserSt->vid & 0x0FFF); - pSmiSt[1] |= (pUserSt->valid & 0x0001) << 12; -} - -static void _rtl8367c_svlanSp2cStSmi2User(rtl8367c_svlan_s2c_t *pUserSt, rtk_uint16 *pSmiSt) -{ - pUserSt->dstport = (((pSmiSt[0] & 0x0200) >> 9) << 3) | (pSmiSt[0] & 0x0007); - pUserSt->svidx = (pSmiSt[0] & 0x01F8) >> 3; - pUserSt->vid = (pSmiSt[1] & 0x0FFF); - pUserSt->valid = (pSmiSt[1] & 0x1000) >> 12; -} - -/* Function Name: - * rtl8367c_setAsicSvlanUplinkPortMask - * Description: - * Set uplink ports mask - * Input: - * portMask - Uplink port mask setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanUplinkPortMask(rtk_uint32 portMask) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_SVLAN_UPLINK_PORTMASK, portMask); -} -/* Function Name: - * rtl8367c_getAsicSvlanUplinkPortMask - * Description: - * Get uplink ports mask - * Input: - * pPortmask - Uplink port mask setting - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanUplinkPortMask(rtk_uint32* pPortmask) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_SVLAN_UPLINK_PORTMASK, pPortmask); -} -/* Function Name: - * rtl8367c_setAsicSvlanTpid - * Description: - * Set accepted S-VLAN ether type. The default ether type of S-VLAN is 0x88a8 - * Input: - * protocolType - Ether type of S-tag frame parsing in uplink ports - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 - * for Q-in-Q SLAN design. User can set mathced ether type as service provider supported protocol - */ -ret_t rtl8367c_setAsicSvlanTpid(rtk_uint32 protocolType) -{ - return rtl8367c_setAsicReg(RTL8367C_REG_VS_TPID, protocolType); -} -/* Function Name: - * rtl8367c_getAsicReg - * Description: - * Get accepted S-VLAN ether type. The default ether type of S-VLAN is 0x88a8 - * Input: - * pProtocolType - Ether type of S-tag frame parsing in uplink ports - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanTpid(rtk_uint32* pProtocolType) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_VS_TPID, pProtocolType); -} -/* Function Name: - * rtl8367c_setAsicSvlanPrioritySel - * Description: - * Set SVLAN priority field setting - * Input: - * priSel - S-priority assignment method, 0:internal priority 1:C-tag priority 2:using Svlan member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanPrioritySel(rtk_uint32 priSel) -{ - if(priSel >= SPRISEL_END) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_SPRISEL_MASK, priSel); -} -/* Function Name: - * rtl8367c_getAsicSvlanPrioritySel - * Description: - * Get SVLAN priority field setting - * Input: - * pPriSel - S-priority assignment method, 0:internal priority 1:C-tag priority 2:using Svlan member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanPrioritySel(rtk_uint32* pPriSel) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_SPRISEL_MASK, pPriSel); -} -/* Function Name: - * rtl8367c_setAsicSvlanTrapPriority - * Description: - * Set trap to CPU priority assignment - * Input: - * priority - Priority assignment - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanTrapPriority(rtk_uint32 priority) -{ - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_QOS_TRAP_PRIORITY0, RTL8367C_SVLAN_PRIOIRTY_MASK, priority); -} -/* Function Name: - * rtl8367c_getAsicSvlanTrapPriority - * Description: - * Get trap to CPU priority assignment - * Input: - * pPriority - Priority assignment - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanTrapPriority(rtk_uint32* pPriority) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_QOS_TRAP_PRIORITY0, RTL8367C_SVLAN_PRIOIRTY_MASK, pPriority); -} -/* Function Name: - * rtl8367c_setAsicSvlanDefaultVlan - * Description: - * Set default egress SVLAN - * Input: - * port - Physical port number (0~10) - * index - index SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_SVLAN_ENTRY_INDEX - Invalid SVLAN index parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanDefaultVlan(rtk_uint32 port, rtk_uint32 index) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(index > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - if(port < 8){ - if(port & 1) - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL0 + (port >> 1), RTL8367C_VS_PORT1_SVIDX_MASK,index); - else - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL0 + (port >> 1), RTL8367C_VS_PORT0_SVIDX_MASK,index); - }else{ - switch(port){ - case 8: - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL4, RTL8367C_VS_PORT8_SVIDX_MASK,index); - break; - - case 9: - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL4, RTL8367C_VS_PORT9_SVIDX_MASK,index); - break; - - case 10: - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL5, RTL8367C_SVLAN_PORTBASED_SVIDX_CTRL5_MASK,index); - break; - } - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicSvlanDefaultVlan - * Description: - * Get default egress SVLAN - * Input: - * port - Physical port number (0~7) - * pIndex - index SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanDefaultVlan(rtk_uint32 port, rtk_uint32* pIndex) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8){ - if(port & 1) - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL0 + (port >> 1), RTL8367C_VS_PORT1_SVIDX_MASK,pIndex); - else - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL0 + (port >> 1), RTL8367C_VS_PORT0_SVIDX_MASK,pIndex); - }else{ - switch(port){ - case 8: - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL4, RTL8367C_VS_PORT8_SVIDX_MASK,pIndex); - break; - - case 9: - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL4, RTL8367C_VS_PORT9_SVIDX_MASK,pIndex); - break; - - case 10: - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_PORTBASED_SVIDX_CTRL5, RTL8367C_SVLAN_PORTBASED_SVIDX_CTRL5_MASK,pIndex); - break; - } - } - - return retVal; - -} -/* Function Name: - * rtl8367c_setAsicSvlanIngressUntag - * Description: - * Set action received un-Stag frame from unplink port - * Input: - * mode - 0:Drop 1:Trap 2:Assign SVLAN - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanIngressUntag(rtk_uint32 mode) -{ - return rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_UNTAG_MASK, mode); -} -/* Function Name: - * rtl8367c_getAsicSvlanIngressUntag - * Description: - * Get action received un-Stag frame from unplink port - * Input: - * pMode - 0:Drop 1:Trap 2:Assign SVLAN - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanIngressUntag(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_UNTAG_MASK, pMode); -} -/* Function Name: - * rtl8367c_setAsicSvlanIngressUnmatch - * Description: - * Set action received unmatched Stag frame from unplink port - * Input: - * mode - 0:Drop 1:Trap 2:Assign SVLAN - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanIngressUnmatch(rtk_uint32 mode) -{ - return rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_UNMAT_MASK, mode); -} -/* Function Name: - * rtl8367c_getAsicSvlanIngressUnmatch - * Description: - * Get action received unmatched Stag frame from unplink port - * Input: - * pMode - 0:Drop 1:Trap 2:Assign SVLAN - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanIngressUnmatch(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_UNMAT_MASK, pMode); - -} -/* Function Name: - * rtl8367c_setAsicSvlanEgressUnassign - * Description: - * Set unplink stream without egress SVID action - * Input: - * enabled - 1:Trap egress unassigned frames to CPU, 0: Use SVLAN setup in VS_CPSVIDX as egress SVID - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanEgressUnassign(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_UIFSEG_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicSvlanEgressUnassign - * Description: - * Get unplink stream without egress SVID action - * Input: - * pEnabled - 1:Trap egress unassigned frames to CPU, 0: Use SVLAN setup in VS_CPSVIDX as egress SVID - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanEgressUnassign(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_UIFSEG_OFFSET, pEnabled); -} - - -/* Function Name: - * rtl8367c_setAsicSvlanMemberConfiguration - * Description: - * Set system 64 S-tag content - * Input: - * index - index of 64 s-tag configuration - * pSvlanMemCfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_INDEX - Invalid SVLAN index parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanMemberConfiguration(rtk_uint32 index, rtl8367c_svlan_memconf_t* pSvlanMemCfg) -{ - ret_t retVal; - rtk_uint32 regAddr, regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smiSvlanMemConf[RTL8367C_SVLAN_MEMCONF_LEN]; - - if(index > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - memset(smiSvlanMemConf, 0x00, sizeof(rtk_uint16) * RTL8367C_SVLAN_MEMCONF_LEN); - _rtl8367c_svlanConfStUser2Smi(pSvlanMemCfg, smiSvlanMemConf); - - accessPtr = smiSvlanMemConf; - - regData = *accessPtr; - for(i = 0; i < 3; i++) - { - retVal = rtl8367c_setAsicReg(RTL8367C_SVLAN_MEMBERCFG_BASE_REG(index) + i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - accessPtr ++; - regData = *accessPtr; - } - - if(index < 63) - regAddr = RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL4+index; - else if(index == 63) - regAddr = RTL8367C_REG_SVLAN_MEMBERCFG63_CTRL4; - - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} -/* Function Name: - * rtl8367c_getAsicSvlanMemberConfiguration - * Description: - * Get system 64 S-tag content - * Input: - * index - index of 64 s-tag configuration - * pSvlanMemCfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_INDEX - Invalid SVLAN index parameter - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanMemberConfiguration(rtk_uint32 index,rtl8367c_svlan_memconf_t* pSvlanMemCfg) -{ - ret_t retVal; - rtk_uint32 regAddr,regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smiSvlanMemConf[RTL8367C_SVLAN_MEMCONF_LEN]; - - if(index > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - memset(smiSvlanMemConf, 0x00, sizeof(rtk_uint16) * RTL8367C_SVLAN_MEMCONF_LEN); - - accessPtr = smiSvlanMemConf; - - for(i = 0; i < 3; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_SVLAN_MEMBERCFG_BASE_REG(index) + i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = regData; - - accessPtr ++; - } - - if(index < 63) - regAddr = RTL8367C_REG_SVLAN_MEMBERCFG0_CTRL4+index; - else if(index == 63) - regAddr = RTL8367C_REG_SVLAN_MEMBERCFG63_CTRL4; - - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = regData; - - _rtl8367c_svlanConfStSmi2User(pSvlanMemCfg, smiSvlanMemConf); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicSvlanC2SConf - * Description: - * Set SVLAN C2S table - * Input: - * index - index of 128 Svlan C2S configuration - * evid - Enhanced VID - * portmask - available c2s port mask - * svidx - index of 64 Svlan member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Invalid entry index - * Note: - * ASIC will check upstream's VID and assign related SVID to mathed packet - */ -ret_t rtl8367c_setAsicSvlanC2SConf(rtk_uint32 index, rtk_uint32 evid, rtk_uint32 portmask, rtk_uint32 svidx) -{ - ret_t retVal; - - if(index > RTL8367C_C2SIDXMAX) - return RT_ERR_ENTRY_INDEX; - - retVal = rtl8367c_setAsicReg(RTL8367C_SVLAN_C2SCFG_BASE_REG(index), svidx); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_SVLAN_C2SCFG_BASE_REG(index) + 1, portmask); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_setAsicReg(RTL8367C_SVLAN_C2SCFG_BASE_REG(index) + 2, evid); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicSvlanC2SConf - * Description: - * Get SVLAN C2S table - * Input: - * index - index of 128 Svlan C2S configuration - * pEvid - Enhanced VID - * pPortmask - available c2s port mask - * pSvidx - index of 64 Svlan member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Invalid entry index - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanC2SConf(rtk_uint32 index, rtk_uint32* pEvid, rtk_uint32* pPortmask, rtk_uint32* pSvidx) -{ - ret_t retVal; - - if(index > RTL8367C_C2SIDXMAX) - return RT_ERR_ENTRY_INDEX; - - retVal = rtl8367c_getAsicReg(RTL8367C_SVLAN_C2SCFG_BASE_REG(index), pSvidx); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_SVLAN_C2SCFG_BASE_REG(index) + 1, pPortmask); - if(retVal != RT_ERR_OK) - return retVal; - - retVal = rtl8367c_getAsicReg(RTL8367C_SVLAN_C2SCFG_BASE_REG(index) + 2, pEvid); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicSvlanMC2SConf - * Description: - * Set system MC2S content - * Input: - * index - index of 32 SVLAN 32 MC2S configuration - * pSvlanMc2sCfg - SVLAN Multicast to SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Invalid entry index - * Note: - * If upstream packet is L2 multicast or IPv4 multicast packet and DMAC/DIP is matched MC2S - * configuration, ASIC will assign egress SVID to the packet - */ -ret_t rtl8367c_setAsicSvlanMC2SConf(rtk_uint32 index,rtl8367c_svlan_mc2s_t* pSvlanMc2sCfg) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smiSvlanMC2S[RTL8367C_SVLAN_MC2S_LEN]; - - if(index > RTL8367C_MC2SIDXMAX) - return RT_ERR_ENTRY_INDEX; - - memset(smiSvlanMC2S, 0x00, sizeof(rtk_uint16) * RTL8367C_SVLAN_MC2S_LEN); - _rtl8367c_svlanMc2sStUser2Smi(pSvlanMc2sCfg, smiSvlanMC2S); - - accessPtr = smiSvlanMC2S; - - regData = *accessPtr; - for(i = 0; i < 5; i++) - { - retVal = rtl8367c_setAsicReg(RTL8367C_SVLAN_MCAST2S_ENTRY_BASE_REG(index) + i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - accessPtr ++; - regData = *accessPtr; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicSvlanMC2SConf - * Description: - * Get system MC2S content - * Input: - * index - index of 32 SVLAN 32 MC2S configuration - * pSvlanMc2sCfg - SVLAN Multicast to SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Invalid entry index - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanMC2SConf(rtk_uint32 index, rtl8367c_svlan_mc2s_t* pSvlanMc2sCfg) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smiSvlanMC2S[RTL8367C_SVLAN_MC2S_LEN]; - - if(index > RTL8367C_MC2SIDXMAX) - return RT_ERR_ENTRY_INDEX; - - memset(smiSvlanMC2S, 0x00, sizeof(rtk_uint16) * RTL8367C_SVLAN_MC2S_LEN); - - accessPtr = smiSvlanMC2S; - - for(i = 0; i < 5; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_SVLAN_MCAST2S_ENTRY_BASE_REG(index) + i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = regData; - accessPtr ++; - } - - - _rtl8367c_svlanMc2sStSmi2User(pSvlanMc2sCfg, smiSvlanMC2S); - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setAsicSvlanSP2CConf - * Description: - * Set system 128 SP2C content - * Input: - * index - index of 128 SVLAN & Port to CVLAN configuration - * pSvlanSp2cCfg - SVLAN & Port to CVLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Invalid entry index - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanSP2CConf(rtk_uint32 index, rtl8367c_svlan_s2c_t* pSvlanSp2cCfg) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smiSvlanSP2C[RTL8367C_SVLAN_SP2C_LEN]; - - if(index > RTL8367C_SP2CMAX) - return RT_ERR_ENTRY_INDEX; - - memset(smiSvlanSP2C, 0x00, sizeof(rtk_uint16) * RTL8367C_SVLAN_SP2C_LEN); - _rtl8367c_svlanSp2cStUser2Smi(pSvlanSp2cCfg,smiSvlanSP2C); - - accessPtr = smiSvlanSP2C; - - regData = *accessPtr; - for(i = 0; i < 2; i++) - { - retVal = rtl8367c_setAsicReg(RTL8367C_SVLAN_S2C_ENTRY_BASE_REG(index) + i, regData); - if(retVal != RT_ERR_OK) - return retVal; - - accessPtr ++; - regData = *accessPtr; - } - - return retVal; -} -/* Function Name: - * rtl8367c_getAsicSvlanSP2CConf - * Description: - * Get system 128 SP2C content - * Input: - * index - index of 128 SVLAN & Port to CVLAN configuration - * pSvlanSp2cCfg - SVLAN & Port to CVLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_ENTRY_INDEX - Invalid entry index - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanSP2CConf(rtk_uint32 index,rtl8367c_svlan_s2c_t* pSvlanSp2cCfg) -{ - ret_t retVal; - rtk_uint32 regData; - rtk_uint16 *accessPtr; - rtk_uint32 i; - rtk_uint16 smiSvlanSP2C[RTL8367C_SVLAN_SP2C_LEN]; - - if(index > RTL8367C_SP2CMAX) - return RT_ERR_ENTRY_INDEX; - - memset(smiSvlanSP2C, 0x00, sizeof(rtk_uint16) * RTL8367C_SVLAN_SP2C_LEN); - - accessPtr = smiSvlanSP2C; - - for(i = 0; i < 2; i++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_SVLAN_S2C_ENTRY_BASE_REG(index) + i, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *accessPtr = regData; - - accessPtr ++; - } - - _rtl8367c_svlanSp2cStSmi2User(pSvlanSp2cCfg, smiSvlanSP2C); - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicSvlanDmacCvidSel - * Description: - * Set downstream CVID decision by DMAC - * Input: - * port - Physical port number (0~7) - * enabled - 0:disabled, 1:enabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanDmacCvidSel(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_setAsicRegBit(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_PORT0_DMACVIDSEL_OFFSET + port, enabled); - else - return rtl8367c_setAsicRegBit(RTL8367C_REG_SVLAN_CFG_EXT, RTL8367C_VS_PORT8_DMACVIDSEL_OFFSET + (port-8), enabled); -} -/* Function Name: - * rtl8367c_getAsicSvlanDmacCvidSel - * Description: - * Get downstream CVID decision by DMAC - * Input: - * port - Physical port number (0~7) - * pEnabled - 0:disabled, 1:enabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanDmacCvidSel(rtk_uint32 port, rtk_uint32* pEnabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicRegBit(RTL8367C_REG_SVLAN_CFG, RTL8367C_VS_PORT0_DMACVIDSEL_OFFSET + port, pEnabled); - else - return rtl8367c_getAsicRegBit(RTL8367C_REG_SVLAN_CFG_EXT, RTL8367C_VS_PORT8_DMACVIDSEL_OFFSET + (port-8), pEnabled); -} -/* Function Name: - * rtl8367c_setAsicSvlanUntagVlan - * Description: - * Set default ingress untag SVLAN - * Input: - * index - index SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_INDEX - Invalid SVLAN index parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanUntagVlan(rtk_uint32 index) -{ - if(index > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_UNTAG_UNMAT_CFG, RTL8367C_VS_UNTAG_SVIDX_MASK, index); -} -/* Function Name: - * rtl8367c_getAsicSvlanUntagVlan - * Description: - * Get default ingress untag SVLAN - * Input: - * pIndex - index SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanUntagVlan(rtk_uint32* pIndex) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_UNTAG_UNMAT_CFG, RTL8367C_VS_UNTAG_SVIDX_MASK, pIndex); -} - -/* Function Name: - * rtl8367c_setAsicSvlanUnmatchVlan - * Description: - * Set default ingress unmatch SVLAN - * Input: - * index - index SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_INDEX - Invalid SVLAN index parameter - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanUnmatchVlan(rtk_uint32 index) -{ - if(index > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_SVLAN_UNTAG_UNMAT_CFG, RTL8367C_VS_UNMAT_SVIDX_MASK, index); -} -/* Function Name: - * rtl8367c_getAsicSvlanUnmatchVlan - * Description: - * Get default ingress unmatch SVLAN - * Input: - * pIndex - index SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanUnmatchVlan(rtk_uint32* pIndex) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_SVLAN_UNTAG_UNMAT_CFG, RTL8367C_VS_UNMAT_SVIDX_MASK, pIndex); -} - - -/* Function Name: - * rtl8367c_setAsicSvlanLookupType - * Description: - * Set svlan lookup table selection - * Input: - * type - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicSvlanLookupType(rtk_uint32 type) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_SVLAN_LOOKUP_TYPE, RTL8367C_SVLAN_LOOKUP_TYPE_OFFSET, type); -} - -/* Function Name: - * rtl8367c_getAsicSvlanLookupType - * Description: - * Get svlan lookup table selection - * Input: - * pType - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicSvlanLookupType(rtk_uint32* pType) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_SVLAN_LOOKUP_TYPE, RTL8367C_SVLAN_LOOKUP_TYPE_OFFSET, pType); -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_trunking.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_trunking.c deleted file mode 100644 index 26d4c29b83..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_trunking.c +++ /dev/null @@ -1,356 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Port trunking related functions - * - */ - -#include -/* Function Name: - * rtl8367c_setAsicTrunkingMode - * Description: - * Set port trunking mode - * Input: - * mode - 1:dumb 0:user defined - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicTrunkingMode(rtk_uint32 mode) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_PORT_TRUNK_CTRL, RTL8367C_PORT_TRUNK_DUMB_OFFSET, mode); -} -/* Function Name: - * rtl8367c_getAsicTrunkingMode - * Description: - * Get port trunking mode - * Input: - * pMode - 1:dumb 0:user defined - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingMode(rtk_uint32* pMode) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_PORT_TRUNK_CTRL, RTL8367C_PORT_TRUNK_DUMB_OFFSET, pMode); -} -/* Function Name: - * rtl8367c_setAsicTrunkingFc - * Description: - * Set port trunking flow control - * Input: - * group - Trunk Group ID - * enabled - 0:disable, 1:enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicTrunkingFc(rtk_uint32 group, rtk_uint32 enabled) -{ - ret_t retVal; - - if(group > RTL8367C_MAX_TRUNK_GID) - return RT_ERR_LA_TRUNK_ID; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_PORT_TRUNK_DROP_CTRL, RTL8367C_PORT_TRUNK_DROP_CTRL_OFFSET, ENABLED)) != RT_ERR_OK) - return retVal; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_PORT_TRUNK_FLOWCTRL, (RTL8367C_EN_FLOWCTRL_TG0_OFFSET + group), enabled); -} -/* Function Name: - * rtl8367c_getAsicTrunkingFc - * Description: - * Get port trunking flow control - * Input: - * group - Trunk Group ID - * pEnabled - 0:disable, 1:enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingFc(rtk_uint32 group, rtk_uint32* pEnabled) -{ - if(group > RTL8367C_MAX_TRUNK_GID) - return RT_ERR_LA_TRUNK_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_PORT_TRUNK_FLOWCTRL, (RTL8367C_EN_FLOWCTRL_TG0_OFFSET + group), pEnabled); -} -/* Function Name: - * rtl8367c_setAsicTrunkingGroup - * Description: - * Set trunking group available port mask - * Input: - * group - Trunk Group ID - * portmask - Logic trunking enable port mask, max 4 ports - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicTrunkingGroup(rtk_uint32 group, rtk_uint32 portmask) -{ - if(group > RTL8367C_MAX_TRUNK_GID) - return RT_ERR_LA_TRUNK_ID; - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_TRUNK_GROUP_MASK, RTL8367C_PORT_TRUNK_GROUP0_MASK_MASK << (group * 4), portmask); -} -/* Function Name: - * rtl8367c_getAsicTrunkingGroup - * Description: - * Get trunking group available port mask - * Input: - * group - Trunk Group ID - * Output: - * pPortmask - Logic trunking enable port mask, max 4 ports - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingGroup(rtk_uint32 group, rtk_uint32* pPortmask) -{ - if(group > RTL8367C_MAX_TRUNK_GID) - return RT_ERR_LA_TRUNK_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_TRUNK_GROUP_MASK, RTL8367C_PORT_TRUNK_GROUP0_MASK_MASK << (group * 4), pPortmask); -} -/* Function Name: - * rtl8367c_setAsicTrunkingFlood - * Description: - * Set port trunking flood function - * Input: - * enabled - Port trunking flooding function 0:disable 1:enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicTrunkingFlood(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_PORT_TRUNK_CTRL, RTL8367C_PORT_TRUNK_FLOOD_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicTrunkingFlood - * Description: - * Get port trunking flood function - * Input: - * pEnabled - Port trunking flooding function 0:disable 1:enable - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingFlood(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_PORT_TRUNK_CTRL, RTL8367C_PORT_TRUNK_FLOOD_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicTrunkingHashSelect - * Description: - * Set port trunking hash select sources - * Input: - * hashsel - hash sources mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * 7 bits mask for link aggregation group0 hash parameter selection {DIP, SIP, DMAC, SMAC, SPA} - * 0b0000001: SPA - * 0b0000010: SMAC - * 0b0000100: DMAC - * 0b0001000: SIP - * 0b0010000: DIP - * 0b0100000: TCP/UDP Source Port - * 0b1000000: TCP/UDP Destination Port - */ -ret_t rtl8367c_setAsicTrunkingHashSelect(rtk_uint32 hashsel) -{ - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_TRUNK_CTRL, RTL8367C_PORT_TRUNK_HASH_MASK, hashsel); -} -/* Function Name: - * rtl8367c_getAsicTrunkingHashSelect - * Description: - * Get port trunking hash select sources - * Input: - * pHashsel - hash sources mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingHashSelect(rtk_uint32* pHashsel) -{ - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_TRUNK_CTRL, RTL8367C_PORT_TRUNK_HASH_MASK, pHashsel); -} -/* Function Name: - * rtl8367c_getAsicQeueuEmptyStatus - * Description: - * Get current output queue if empty status - * Input: - * portmask - queue empty port mask - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicQeueuEmptyStatus(rtk_uint32* portmask) -{ - return rtl8367c_getAsicReg(RTL8367C_REG_PORT_QEMPTY, portmask); -} -/* Function Name: - * rtl8367c_setAsicTrunkingHashTable - * Description: - * Set port trunking hash value mapping table - * Input: - * hashval - hashing value 0-15 - * portId - trunking port id 0-3 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - Invalid hashing value (0-15) - * Note: - * None - */ -ret_t rtl8367c_setAsicTrunkingHashTable(rtk_uint32 hashval, rtk_uint32 portId) -{ - if(hashval > RTL8367C_TRUNKING_HASHVALUE_MAX) - return RT_ERR_OUT_OF_RANGE; - - if(portId >= RTL8367C_TRUNKING_PORTNO) - return RT_ERR_PORT_ID; - - if(hashval >= 8) - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL1, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH8_MASK<<((hashval-8)*2), portId); - else - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL0, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH0_MASK<<(hashval*2), portId); -} -/* Function Name: - * rtl8367c_getAsicTrunkingHashTable - * Description: - * Get port trunking hash value mapping table - * Input: - * hashval - hashing value 0-15 - * pPortId - trunking port id 0-3 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid hashing value (0-15) - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingHashTable(rtk_uint32 hashval, rtk_uint32* pPortId) -{ - if(hashval > RTL8367C_TRUNKING_HASHVALUE_MAX) - return RT_ERR_OUT_OF_RANGE; - - if(hashval >= 8) - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL1, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL1_HASH8_MASK<<((hashval-8)*2), pPortId); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL0, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL0_HASH0_MASK<<(hashval*2), pPortId); -} - -/* Function Name: - * rtl8367c_setAsicTrunkingHashTable1 - * Description: - * Set port trunking hash value mapping table - * Input: - * hashval - hashing value 0-15 - * portId - trunking port id 0-3 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_OUT_OF_RANGE - Invalid hashing value (0-15) - * Note: - * None - */ -ret_t rtl8367c_setAsicTrunkingHashTable1(rtk_uint32 hashval, rtk_uint32 portId) -{ - if(hashval > RTL8367C_TRUNKING_HASHVALUE_MAX) - return RT_ERR_OUT_OF_RANGE; - - if(portId >= RTL8367C_TRUNKING1_PORTN0) - return RT_ERR_PORT_ID; - - if(hashval >= 8) - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL3, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH8_MASK<<((hashval-8)*2), portId); - else - return rtl8367c_setAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL2, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH0_MASK<<(hashval*2), portId); -} -/* Function Name: - * rtl8367c_getAsicTrunkingHashTable1 - * Description: - * Get port trunking hash value mapping table - * Input: - * hashval - hashing value 0-15 - * pPortId - trunking port id 0-3 - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_OUT_OF_RANGE - Invalid hashing value (0-15) - * Note: - * None - */ -ret_t rtl8367c_getAsicTrunkingHashTable1(rtk_uint32 hashval, rtk_uint32* pPortId) -{ - if(hashval > RTL8367C_TRUNKING_HASHVALUE_MAX) - return RT_ERR_OUT_OF_RANGE; - - if(hashval >= 8) - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL3, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL3_HASH8_MASK<<((hashval-8)*2), pPortId); - else - return rtl8367c_getAsicRegBits(RTL8367C_REG_PORT_TRUNK_HASH_MAPPING_CTRL2, RTL8367C_PORT_TRUNK_HASH_MAPPING_CTRL2_HASH0_MASK<<(hashval*2), pPortId); -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_unknownMulticast.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_unknownMulticast.c deleted file mode 100644 index fcebd1b7f7..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_unknownMulticast.c +++ /dev/null @@ -1,238 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : Unkown multicast related functions - * - */ - -#include - -/* Function Name: - * rtl8367c_setAsicUnknownL2MulticastBehavior - * Description: - * Set behavior of L2 multicast - * Input: - * port - Physical port number (0~7) - * behave - 0: flooding, 1: drop, 2: trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_NOT_ALLOWED - Invalid operation - * Note: - * None - */ -ret_t rtl8367c_setAsicUnknownL2MulticastBehavior(rtk_uint32 port, rtk_uint32 behave) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(behave >= L2_UNKOWN_MULTICAST_END) - return RT_ERR_NOT_ALLOWED; - if(port < 8) - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_UNKNOWN_L2_MULTICAST_REG(port), RTL8367C_UNKNOWN_L2_MULTICAST_MASK(port), behave); - if(retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_UNKNOWN_L2_MULTICAST_CTRL1, 3 << ((port - 8) << 1), behave); - if(retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicUnknownL2MulticastBehavior - * Description: - * Get behavior of L2 multicast - * Input: - * port - Physical port number (0~7) - * pBehave - 0: flooding, 1: drop, 2: trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicUnknownL2MulticastBehavior(rtk_uint32 port, rtk_uint32 *pBehave) -{ - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_UNKNOWN_L2_MULTICAST_REG(port), RTL8367C_UNKNOWN_L2_MULTICAST_MASK(port), pBehave); - if (retVal != RT_ERR_OK) - return retVal; - } - else - { - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_UNKNOWN_L2_MULTICAST_CTRL1, 3 << ((port - 8) << 1), pBehave); - if (retVal != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicUnknownIPv4MulticastBehavior - * Description: - * Set behavior of IPv4 multicast - * Input: - * port - Physical port number (0~7) - * behave - 0: flooding, 1: drop, 2: trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_NOT_ALLOWED - Invalid operation - * Note: - * None - */ -ret_t rtl8367c_setAsicUnknownIPv4MulticastBehavior(rtk_uint32 port, rtk_uint32 behave) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(behave >= L3_UNKOWN_MULTICAST_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_UNKNOWN_IPV4_MULTICAST_REG(port), RTL8367C_UNKNOWN_IPV4_MULTICAST_MASK(port), behave); -} -/* Function Name: - * rtl8367c_getAsicUnknownIPv4MulticastBehavior - * Description: - * Get behavior of IPv4 multicast - * Input: - * port - Physical port number (0~7) - * pBehave - 0: flooding, 1: drop, 2: trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicUnknownIPv4MulticastBehavior(rtk_uint32 port, rtk_uint32 *pBehave) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_UNKNOWN_IPV4_MULTICAST_REG(port), RTL8367C_UNKNOWN_IPV4_MULTICAST_MASK(port), pBehave); -} -/* Function Name: - * rtl8367c_setAsicUnknownIPv6MulticastBehavior - * Description: - * Set behavior of IPv6 multicast - * Input: - * port - Physical port number (0~7) - * behave - 0: flooding, 1: drop, 2: trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_NOT_ALLOWED - Invalid operation - * Note: - * None - */ -ret_t rtl8367c_setAsicUnknownIPv6MulticastBehavior(rtk_uint32 port, rtk_uint32 behave) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(behave >= L3_UNKOWN_MULTICAST_END) - return RT_ERR_NOT_ALLOWED; - - return rtl8367c_setAsicRegBits(RTL8367C_UNKNOWN_IPV6_MULTICAST_REG(port), RTL8367C_UNKNOWN_IPV6_MULTICAST_MASK(port), behave); -} -/* Function Name: - * rtl8367c_getAsicUnknownIPv6MulticastBehavior - * Description: - * Get behavior of IPv6 multicast - * Input: - * port - Physical port number (0~7) - * pBehave - 0: flooding, 1: drop, 2: trap - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicUnknownIPv6MulticastBehavior(rtk_uint32 port, rtk_uint32 *pBehave) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_UNKNOWN_IPV6_MULTICAST_REG(port), RTL8367C_UNKNOWN_IPV6_MULTICAST_MASK(port), pBehave); -} -/* Function Name: - * rtl8367c_setAsicUnknownMulticastTrapPriority - * Description: - * Set trap priority of unknown multicast frame - * Input: - * priority - priority (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicUnknownMulticastTrapPriority(rtk_uint32 priority) -{ - if(priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - return rtl8367c_setAsicRegBits(RTL8367C_QOS_TRAP_PRIORITY_CTRL0_REG, RTL8367C_UNKNOWN_MC_PRIORTY_MASK, priority); -} -/* Function Name: - * rtl8367c_getAsicUnknownMulticastTrapPriority - * Description: - * Get trap priority of unknown multicast frame - * Input: - * pPriority - priority (0~7) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicUnknownMulticastTrapPriority(rtk_uint32 *pPriority) -{ - return rtl8367c_getAsicRegBits(RTL8367C_QOS_TRAP_PRIORITY_CTRL0_REG, RTL8367C_UNKNOWN_MC_PRIORTY_MASK, pPriority); -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_vlan.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_vlan.c deleted file mode 100644 index 1e283e7432..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/rtl8367c_asicdrv_vlan.c +++ /dev/null @@ -1,1505 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTL8367C switch high-level API for RTL8367C - * Feature : VLAN related functions - * - */ -#include - -#include - -#if defined(CONFIG_RTL8367C_ASICDRV_TEST) -rtl8367c_user_vlan4kentry Rtl8370sVirtualVlanTable[RTL8367C_VIDMAX + 1]; -#endif - -static void _rtl8367c_VlanMCStUser2Smi(rtl8367c_vlanconfiguser *pVlanCg, rtk_uint16 *pSmiVlanCfg) -{ - pSmiVlanCfg[0] |= pVlanCg->mbr & 0x07FF; - - pSmiVlanCfg[1] |= pVlanCg->fid_msti & 0x000F; - - pSmiVlanCfg[2] |= pVlanCg->vbpen & 0x0001; - pSmiVlanCfg[2] |= (pVlanCg->vbpri & 0x0007) << 1; - pSmiVlanCfg[2] |= (pVlanCg->envlanpol & 0x0001) << 4; - pSmiVlanCfg[2] |= (pVlanCg->meteridx & 0x003F) << 5; - - pSmiVlanCfg[3] |= pVlanCg->evid & 0x1FFF; -} - -static void _rtl8367c_VlanMCStSmi2User(rtk_uint16 *pSmiVlanCfg, rtl8367c_vlanconfiguser *pVlanCg) -{ - pVlanCg->mbr = pSmiVlanCfg[0] & 0x07FF; - pVlanCg->fid_msti = pSmiVlanCfg[1] & 0x000F; - pVlanCg->meteridx = (pSmiVlanCfg[2] >> 5) & 0x003F; - pVlanCg->envlanpol = (pSmiVlanCfg[2] >> 4) & 0x0001; - pVlanCg->vbpri = (pSmiVlanCfg[2] >> 1) & 0x0007; - pVlanCg->vbpen = pSmiVlanCfg[2] & 0x0001; - pVlanCg->evid = pSmiVlanCfg[3] & 0x1FFF; -} - -static void _rtl8367c_Vlan4kStUser2Smi(rtl8367c_user_vlan4kentry *pUserVlan4kEntry, rtk_uint16 *pSmiVlan4kEntry) -{ - pSmiVlan4kEntry[0] |= (pUserVlan4kEntry->mbr & 0x00FF); - pSmiVlan4kEntry[0] |= (pUserVlan4kEntry->untag & 0x00FF) << 8; - - pSmiVlan4kEntry[1] |= (pUserVlan4kEntry->fid_msti & 0x000F); - pSmiVlan4kEntry[1] |= (pUserVlan4kEntry->vbpen & 0x0001) << 4; - pSmiVlan4kEntry[1] |= (pUserVlan4kEntry->vbpri & 0x0007) << 5; - pSmiVlan4kEntry[1] |= (pUserVlan4kEntry->envlanpol & 0x0001) << 8; - pSmiVlan4kEntry[1] |= (pUserVlan4kEntry->meteridx & 0x001F) << 9; - pSmiVlan4kEntry[1] |= (pUserVlan4kEntry->ivl_svl & 0x0001) << 14; - - pSmiVlan4kEntry[2] |= ((pUserVlan4kEntry->mbr & 0x0700) >> 8); - pSmiVlan4kEntry[2] |= ((pUserVlan4kEntry->untag & 0x0700) >> 8) << 3; - pSmiVlan4kEntry[2] |= ((pUserVlan4kEntry->meteridx & 0x0020) >> 5) << 6; -} - - -static void _rtl8367c_Vlan4kStSmi2User(rtk_uint16 *pSmiVlan4kEntry, rtl8367c_user_vlan4kentry *pUserVlan4kEntry) -{ - pUserVlan4kEntry->mbr = (pSmiVlan4kEntry[0] & 0x00FF) | ((pSmiVlan4kEntry[2] & 0x0007) << 8); - pUserVlan4kEntry->untag = ((pSmiVlan4kEntry[0] & 0xFF00) >> 8) | (((pSmiVlan4kEntry[2] & 0x0038) >> 3) << 8); - pUserVlan4kEntry->fid_msti = pSmiVlan4kEntry[1] & 0x000F; - pUserVlan4kEntry->vbpen = (pSmiVlan4kEntry[1] & 0x0010) >> 4; - pUserVlan4kEntry->vbpri = (pSmiVlan4kEntry[1] & 0x00E0) >> 5; - pUserVlan4kEntry->envlanpol = (pSmiVlan4kEntry[1] & 0x0100) >> 8; - pUserVlan4kEntry->meteridx = ((pSmiVlan4kEntry[1] & 0x3E00) >> 9) | (((pSmiVlan4kEntry[2] & 0x0040) >> 6) << 5); - pUserVlan4kEntry->ivl_svl = (pSmiVlan4kEntry[1] & 0x4000) >> 14; -} - -/* Function Name: - * rtl8367c_setAsicVlanMemberConfig - * Description: - * Set 32 VLAN member configurations - * Input: - * index - VLAN member configuration index (0~31) - * pVlanCg - VLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_L2_FID - Invalid FID - * RT_ERR_PORT_MASK - Invalid portmask - * RT_ERR_FILTER_METER_ID - Invalid meter - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * RT_ERR_VLAN_ENTRY_NOT_FOUND - Invalid VLAN member configuration index - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanMemberConfig(rtk_uint32 index, rtl8367c_vlanconfiguser *pVlanCg) -{ - ret_t retVal; - rtk_uint32 regAddr; - rtk_uint32 regData; - rtk_uint16 *tableAddr; - rtk_uint32 page_idx; - rtk_uint16 smi_vlancfg[RTL8367C_VLAN_MBRCFG_LEN]; - - /* Error Checking */ - if(index > RTL8367C_CVIDXMAX) - return RT_ERR_VLAN_ENTRY_NOT_FOUND; - - if(pVlanCg->evid > RTL8367C_EVIDMAX) - return RT_ERR_INPUT; - - - if(pVlanCg->mbr > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - if(pVlanCg->fid_msti > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if(pVlanCg->meteridx > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(pVlanCg->vbpri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - memset(smi_vlancfg, 0x00, sizeof(rtk_uint16) * RTL8367C_VLAN_MBRCFG_LEN); - _rtl8367c_VlanMCStUser2Smi(pVlanCg, smi_vlancfg); - tableAddr = smi_vlancfg; - - for(page_idx = 0; page_idx < 4; page_idx++) /* 4 pages per VLAN Member Config */ - { - regAddr = RTL8367C_VLAN_MEMBER_CONFIGURATION_BASE + (index * 4) + page_idx; - regData = *tableAddr; - - retVal = rtl8367c_setAsicReg(regAddr, regData); - if(retVal != RT_ERR_OK) - return retVal; - - tableAddr++; - } - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicVlanMemberConfig - * Description: - * Get 32 VLAN member configurations - * Input: - * index - VLAN member configuration index (0~31) - * pVlanCg - VLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_VLAN_ENTRY_NOT_FOUND - Invalid VLAN member configuration index - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanMemberConfig(rtk_uint32 index, rtl8367c_vlanconfiguser *pVlanCg) -{ - ret_t retVal; - rtk_uint32 page_idx; - rtk_uint32 regAddr; - rtk_uint32 regData; - rtk_uint16 *tableAddr; - rtk_uint16 smi_vlancfg[RTL8367C_VLAN_MBRCFG_LEN]; - - if(index > RTL8367C_CVIDXMAX) - return RT_ERR_VLAN_ENTRY_NOT_FOUND; - - memset(smi_vlancfg, 0x00, sizeof(rtk_uint16) * RTL8367C_VLAN_MBRCFG_LEN); - tableAddr = smi_vlancfg; - - for(page_idx = 0; page_idx < 4; page_idx++) /* 4 pages per VLAN Member Config */ - { - regAddr = RTL8367C_VLAN_MEMBER_CONFIGURATION_BASE + (index * 4) + page_idx; - - retVal = rtl8367c_getAsicReg(regAddr, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *tableAddr = (rtk_uint16)regData; - tableAddr++; - } - - _rtl8367c_VlanMCStSmi2User(smi_vlancfg, pVlanCg); - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlan4kEntry - * Description: - * Set VID mapped entry to 4K VLAN table - * Input: - * pVlan4kEntry - 4K VLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_L2_FID - Invalid FID - * RT_ERR_VLAN_VID - Invalid VID parameter (0~4095) - * RT_ERR_PORT_MASK - Invalid portmask - * RT_ERR_FILTER_METER_ID - Invalid meter - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * Note: - * None - */ -ret_t rtl8367c_setAsicVlan4kEntry(rtl8367c_user_vlan4kentry *pVlan4kEntry ) -{ - rtk_uint16 vlan_4k_entry[RTL8367C_VLAN_4KTABLE_LEN]; - rtk_uint32 page_idx; - rtk_uint16 *tableAddr; - ret_t retVal; - rtk_uint32 regData; - - if(pVlan4kEntry->vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if(pVlan4kEntry->mbr > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - if(pVlan4kEntry->untag > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - if(pVlan4kEntry->fid_msti > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if(pVlan4kEntry->meteridx > RTL8367C_METERMAX) - return RT_ERR_FILTER_METER_ID; - - if(pVlan4kEntry->vbpri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - memset(vlan_4k_entry, 0x00, sizeof(rtk_uint16) * RTL8367C_VLAN_4KTABLE_LEN); - _rtl8367c_Vlan4kStUser2Smi(pVlan4kEntry, vlan_4k_entry); - - /* Prepare Data */ - tableAddr = vlan_4k_entry; - for(page_idx = 0; page_idx < RTL8367C_VLAN_4KTABLE_LEN; page_idx++) - { - regData = *tableAddr; - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_WRDATA_BASE + page_idx, regData); - if(retVal != RT_ERR_OK) - return retVal; - - tableAddr++; - } - - /* Write Address (VLAN_ID) */ - regData = pVlan4kEntry->vid; - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_ADDR_REG, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Write Command */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_TABLE_ACCESS_CTRL_REG, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK,RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_WRITE,TB_TARGET_CVLAN)); - if(retVal != RT_ERR_OK) - return retVal; - -#if defined(CONFIG_RTL8367C_ASICDRV_TEST) - memcpy(&Rtl8370sVirtualVlanTable[pVlan4kEntry->vid], pVlan4kEntry, sizeof(rtl8367c_user_vlan4kentry)); -#endif - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicVlan4kEntry - * Description: - * Get VID mapped entry to 4K VLAN table - * Input: - * pVlan4kEntry - 4K VLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VID parameter (0~4095) - * RT_ERR_BUSYWAIT_TIMEOUT - LUT is busy at retrieving - * Note: - * None - */ -ret_t rtl8367c_getAsicVlan4kEntry(rtl8367c_user_vlan4kentry *pVlan4kEntry ) -{ - rtk_uint16 vlan_4k_entry[RTL8367C_VLAN_4KTABLE_LEN]; - rtk_uint32 page_idx; - rtk_uint16 *tableAddr; - ret_t retVal; - rtk_uint32 regData; - rtk_uint32 busyCounter; - - if(pVlan4kEntry->vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Polling status */ - busyCounter = RTL8367C_VLAN_BUSY_CHECK_NO; - while(busyCounter) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - if(regData == 0) - break; - - busyCounter --; - if(busyCounter == 0) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - - /* Write Address (VLAN_ID) */ - regData = pVlan4kEntry->vid; - retVal = rtl8367c_setAsicReg(RTL8367C_TABLE_ACCESS_ADDR_REG, regData); - if(retVal != RT_ERR_OK) - return retVal; - - /* Read Command */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_TABLE_ACCESS_CTRL_REG, RTL8367C_TABLE_TYPE_MASK | RTL8367C_COMMAND_TYPE_MASK, RTL8367C_TABLE_ACCESS_REG_DATA(TB_OP_READ,TB_TARGET_CVLAN)); - if(retVal != RT_ERR_OK) - return retVal; - - /* Polling status */ - busyCounter = RTL8367C_VLAN_BUSY_CHECK_NO; - while(busyCounter) - { - retVal = rtl8367c_getAsicRegBit(RTL8367C_TABLE_ACCESS_STATUS_REG, RTL8367C_TABLE_LUT_ADDR_BUSY_FLAG_OFFSET,®Data); - if(retVal != RT_ERR_OK) - return retVal; - - if(regData == 0) - break; - - busyCounter --; - if(busyCounter == 0) - return RT_ERR_BUSYWAIT_TIMEOUT; - } - - /* Read VLAN data from register */ - tableAddr = vlan_4k_entry; - for(page_idx = 0; page_idx < RTL8367C_VLAN_4KTABLE_LEN; page_idx++) - { - retVal = rtl8367c_getAsicReg(RTL8367C_TABLE_ACCESS_RDDATA_BASE + page_idx, ®Data); - if(retVal != RT_ERR_OK) - return retVal; - - *tableAddr = regData; - tableAddr++; - } - - _rtl8367c_Vlan4kStSmi2User(vlan_4k_entry, pVlan4kEntry); - -#if defined(CONFIG_RTL8367C_ASICDRV_TEST) - memcpy(pVlan4kEntry, &Rtl8370sVirtualVlanTable[pVlan4kEntry->vid], sizeof(rtl8367c_user_vlan4kentry)); -#endif - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlanAccpetFrameType - * Description: - * Set per-port acceptable frame type - * Input: - * port - Physical port number (0~10) - * frameType - The acceptable frame type - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_VLAN_ACCEPT_FRAME_TYPE - Invalid frame type - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanAccpetFrameType(rtk_uint32 port, rtl8367c_accframetype frameType) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(frameType >= FRAME_TYPE_MAX_BOUND) - return RT_ERR_VLAN_ACCEPT_FRAME_TYPE; - - return rtl8367c_setAsicRegBits(RTL8367C_VLAN_ACCEPT_FRAME_TYPE_REG(port), RTL8367C_VLAN_ACCEPT_FRAME_TYPE_MASK(port), frameType); -} -/* Function Name: - * rtl8367c_getAsicVlanAccpetFrameType - * Description: - * Get per-port acceptable frame type - * Input: - * port - Physical port number (0~10) - * pFrameType - The acceptable frame type - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_VLAN_ACCEPT_FRAME_TYPE - Invalid frame type - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanAccpetFrameType(rtk_uint32 port, rtl8367c_accframetype *pFrameType) -{ - rtk_uint32 regData; - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_VLAN_ACCEPT_FRAME_TYPE_REG(port), RTL8367C_VLAN_ACCEPT_FRAME_TYPE_MASK(port), ®Data)) != RT_ERR_OK) - return retVal; - - *pFrameType = (rtl8367c_accframetype)regData; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlanIngressFilter - * Description: - * Set VLAN Ingress Filter - * Input: - * port - Physical port number (0~10) - * enabled - Enable or disable Ingress filter - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanIngressFilter(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_VLAN_INGRESS_REG, port, enabled); -} -/* Function Name: - * rtl8367c_getAsicVlanIngressFilter - * Description: - * Get VLAN Ingress Filter - * Input: - * port - Physical port number (0~10) - * pEnable - Enable or disable Ingress filter - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanIngressFilter(rtk_uint32 port, rtk_uint32 *pEnable) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_VLAN_INGRESS_REG, port, pEnable); -} -/* Function Name: - * rtl8367c_setAsicVlanEgressTagMode - * Description: - * Set CVLAN egress tag mode - * Input: - * port - Physical port number (0~10) - * tagMode - The egress tag mode. Including Original mode, Keep tag mode and Priority tag mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanEgressTagMode(rtk_uint32 port, rtl8367c_egtagmode tagMode) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(tagMode >= EG_TAG_MODE_END) - return RT_ERR_INPUT; - - return rtl8367c_setAsicRegBits(RTL8367C_PORT_MISC_CFG_REG(port), RTL8367C_VLAN_EGRESS_MDOE_MASK, tagMode); -} -/* Function Name: - * rtl8367c_getAsicVlanEgressTagMode - * Description: - * Get CVLAN egress tag mode - * Input: - * port - Physical port number (0~10) - * pTagMode - The egress tag mode. Including Original mode, Keep tag mode and Priority tag mode - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanEgressTagMode(rtk_uint32 port, rtl8367c_egtagmode *pTagMode) -{ - rtk_uint32 regData; - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if((retVal = rtl8367c_getAsicRegBits(RTL8367C_PORT_MISC_CFG_REG(port), RTL8367C_VLAN_EGRESS_MDOE_MASK, ®Data)) != RT_ERR_OK) - return retVal; - - *pTagMode = (rtl8367c_egtagmode)regData; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlanPortBasedVID - * Description: - * Set port based VID which is indexed to 32 VLAN member configurations - * Input: - * port - Physical port number (0~10) - * index - Index to VLAN member configuration - * pri - 1Q Port based VLAN priority - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * RT_ERR_VLAN_ENTRY_NOT_FOUND - Invalid VLAN member configuration index - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanPortBasedVID(rtk_uint32 port, rtk_uint32 index, rtk_uint32 pri) -{ - rtk_uint32 regAddr, bit_mask; - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(index > RTL8367C_CVIDXMAX) - return RT_ERR_VLAN_ENTRY_NOT_FOUND; - - if(pri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - regAddr = RTL8367C_VLAN_PVID_CTRL_REG(port); - bit_mask = RTL8367C_PORT_VIDX_MASK(port); - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, index); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_VLAN_PORTBASED_PRIORITY_REG(port); - bit_mask = RTL8367C_VLAN_PORTBASED_PRIORITY_MASK(port); - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, pri); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicVlanPortBasedVID - * Description: - * Get port based VID which is indexed to 32 VLAN member configurations - * Input: - * port - Physical port number (0~10) - * pIndex - Index to VLAN member configuration - * pPri - 1Q Port based VLAN priority - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanPortBasedVID(rtk_uint32 port, rtk_uint32 *pIndex, rtk_uint32 *pPri) -{ - rtk_uint32 regAddr,bit_mask; - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - regAddr = RTL8367C_VLAN_PVID_CTRL_REG(port); - bit_mask = RTL8367C_PORT_VIDX_MASK(port); - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, pIndex); - if(retVal != RT_ERR_OK) - return retVal; - - regAddr = RTL8367C_VLAN_PORTBASED_PRIORITY_REG(port); - bit_mask = RTL8367C_VLAN_PORTBASED_PRIORITY_MASK(port); - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, pPri); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlanProtocolBasedGroupData - * Description: - * Set protocol and port based group database - * Input: - * index - Index to VLAN member configuration - * pPbCfg - Protocol and port based group database entry - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_VLAN_PROTO_AND_PORT - Invalid protocol base group database index - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanProtocolBasedGroupData(rtk_uint32 index, rtl8367c_protocolgdatacfg *pPbCfg) -{ - rtk_uint32 frameType; - rtk_uint32 etherType; - ret_t retVal; - - /* Error Checking */ - if(index > RTL8367C_PROTOVLAN_GIDX_MAX) - return RT_ERR_VLAN_PROTO_AND_PORT; - - if(pPbCfg->frameType >= PPVLAN_FRAME_TYPE_END ) - return RT_ERR_INPUT; - - frameType = pPbCfg->frameType; - etherType = pPbCfg->etherType; - - /* Frame type */ - retVal = rtl8367c_setAsicRegBits(RTL8367C_VLAN_PPB_FRAMETYPE_REG(index), RTL8367C_VLAN_PPB_FRAMETYPE_MASK, frameType); - if(retVal != RT_ERR_OK) - return retVal; - - /* Ether type */ - retVal = rtl8367c_setAsicReg(RTL8367C_VLAN_PPB_ETHERTYPR_REG(index), etherType); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicVlanProtocolBasedGroupData - * Description: - * Get protocol and port based group database - * Input: - * index - Index to VLAN member configuration - * pPbCfg - Protocol and port based group database entry - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_VLAN_PROTO_AND_PORT - Invalid protocol base group database index - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanProtocolBasedGroupData(rtk_uint32 index, rtl8367c_protocolgdatacfg *pPbCfg) -{ - rtk_uint32 frameType; - rtk_uint32 etherType; - ret_t retVal; - - /* Error Checking */ - if(index > RTL8367C_PROTOVLAN_GIDX_MAX) - return RT_ERR_VLAN_PROTO_AND_PORT; - - /* Read Frame type */ - retVal = rtl8367c_getAsicRegBits(RTL8367C_VLAN_PPB_FRAMETYPE_REG(index), RTL8367C_VLAN_PPB_FRAMETYPE_MASK, &frameType); - if(retVal != RT_ERR_OK) - return retVal; - - /* Read Ether type */ - retVal = rtl8367c_getAsicReg(RTL8367C_VLAN_PPB_ETHERTYPR_REG(index), ðerType); - if(retVal != RT_ERR_OK) - return retVal; - - - pPbCfg->frameType = frameType; - pPbCfg->etherType = etherType; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlanPortAndProtocolBased - * Description: - * Set protocol and port based VLAN configuration - * Input: - * port - Physical port number (0~10) - * index - Index of protocol and port based database index - * pPpbCfg - Protocol and port based VLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_QOS_INT_PRIORITY - Invalid priority - * RT_ERR_VLAN_PROTO_AND_PORT - Invalid protocol base group database index - * RT_ERR_VLAN_ENTRY_NOT_FOUND - Invalid VLAN member configuration index - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanPortAndProtocolBased(rtk_uint32 port, rtk_uint32 index, rtl8367c_protocolvlancfg *pPpbCfg) -{ - rtk_uint32 reg_addr, bit_mask, bit_value; - ret_t retVal; - - /* Error Checking */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(index > RTL8367C_PROTOVLAN_GIDX_MAX) - return RT_ERR_VLAN_PROTO_AND_PORT; - - if( (pPpbCfg->valid != FALSE) && (pPpbCfg->valid != TRUE) ) - return RT_ERR_INPUT; - - if(pPpbCfg->vlan_idx > RTL8367C_CVIDXMAX) - return RT_ERR_VLAN_ENTRY_NOT_FOUND; - - if(pPpbCfg->priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - /* Valid bit */ - reg_addr = RTL8367C_VLAN_PPB_VALID_REG(index); - bit_mask = 0x0001 << port; - bit_value = ((TRUE == pPpbCfg->valid) ? 0x1 : 0x0); - retVal = rtl8367c_setAsicRegBits(reg_addr, bit_mask, bit_value); - if(retVal != RT_ERR_OK) - return retVal; - - /* Calculate the actual register address for CVLAN index*/ - if(port < 8) - { - reg_addr = RTL8367C_VLAN_PPB_CTRL_REG(index, port); - bit_mask = RTL8367C_VLAN_PPB_CTRL_MASK(port); - } - else if(port == 8) - { - reg_addr = RTL8367C_REG_VLAN_PPB0_CTRL4; - bit_mask = RTL8367C_VLAN_PPB0_CTRL4_PORT8_INDEX_MASK; - } - else if(port == 9) - { - reg_addr = RTL8367C_REG_VLAN_PPB0_CTRL4; - bit_mask = RTL8367C_VLAN_PPB0_CTRL4_PORT9_INDEX_MASK; - } - else if(port == 10) - { - reg_addr = RTL8367C_REG_VLAN_PPB0_CTRL4; - bit_mask = RTL8367C_VLAN_PPB0_CTRL4_PORT10_INDEX_MASK; - } - - bit_value = pPpbCfg->vlan_idx; - retVal = rtl8367c_setAsicRegBits(reg_addr, bit_mask, bit_value); - if(retVal != RT_ERR_OK) - return retVal; - - /* write priority */ - reg_addr = RTL8367C_VLAN_PPB_PRIORITY_ITEM_REG(port, index); - bit_mask = RTL8367C_VLAN_PPB_PRIORITY_ITEM_MASK(port); - bit_value = pPpbCfg->priority; - retVal = rtl8367c_setAsicRegBits(reg_addr, bit_mask, bit_value); - if(retVal != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_getAsicVlanPortAndProtocolBased - * Description: - * Get protocol and port based VLAN configuration - * Input: - * port - Physical port number (0~7) - * index - Index of protocol and port based database index - * pPpbCfg - Protocol and port based VLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_VLAN_PROTO_AND_PORT - Invalid protocol base group database index - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanPortAndProtocolBased(rtk_uint32 port, rtk_uint32 index, rtl8367c_protocolvlancfg *pPpbCfg) -{ - rtk_uint32 reg_addr, bit_mask, bit_value; - ret_t retVal; - - /* Error Checking */ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(index > RTL8367C_PROTOVLAN_GIDX_MAX) - return RT_ERR_VLAN_PROTO_AND_PORT; - - if(pPpbCfg == NULL) - return RT_ERR_INPUT; - - /* Valid bit */ - reg_addr = RTL8367C_VLAN_PPB_VALID_REG(index); - bit_mask = 0x0001 << port; - retVal = rtl8367c_getAsicRegBits(reg_addr, bit_mask, &bit_value); - if(retVal != RT_ERR_OK) - return retVal; - - pPpbCfg->valid = bit_value; - - /* CVLAN index */ - if(port < 8) - { - reg_addr = RTL8367C_VLAN_PPB_CTRL_REG(index, port); - bit_mask = RTL8367C_VLAN_PPB_CTRL_MASK(port); - } - else if(port == 8) - { - reg_addr = RTL8367C_REG_VLAN_PPB0_CTRL4; - bit_mask = RTL8367C_VLAN_PPB0_CTRL4_PORT8_INDEX_MASK; - } - else if(port == 9) - { - reg_addr = RTL8367C_REG_VLAN_PPB0_CTRL4; - bit_mask = RTL8367C_VLAN_PPB0_CTRL4_PORT9_INDEX_MASK; - } - else if(port == 10) - { - reg_addr = RTL8367C_REG_VLAN_PPB0_CTRL4; - bit_mask = RTL8367C_VLAN_PPB0_CTRL4_PORT10_INDEX_MASK; - } - - retVal = rtl8367c_getAsicRegBits(reg_addr, bit_mask, &bit_value); - if(retVal != RT_ERR_OK) - return retVal; - - pPpbCfg->vlan_idx = bit_value; - - - /* priority */ - reg_addr = RTL8367C_VLAN_PPB_PRIORITY_ITEM_REG(port,index); - bit_mask = RTL8367C_VLAN_PPB_PRIORITY_ITEM_MASK(port); - retVal = rtl8367c_getAsicRegBits(reg_addr, bit_mask, &bit_value); - if(retVal != RT_ERR_OK) - return retVal; - - pPpbCfg->priority = bit_value; - return RT_ERR_OK; -} -/* Function Name: - * rtl8367c_setAsicVlanFilter - * Description: - * Set enable CVLAN filtering function - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanFilter(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_VLAN_CTRL, RTL8367C_VLAN_CTRL_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicVlanFilter - * Description: - * Get enable CVLAN filtering function - * Input: - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanFilter(rtk_uint32* pEnabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_VLAN_CTRL, RTL8367C_VLAN_CTRL_OFFSET, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicVlanUntagDscpPriorityEn - * Description: - * Set enable Dscp to untag 1Q priority - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanUntagDscpPriorityEn(rtk_uint32 enabled) -{ - return rtl8367c_setAsicRegBit(RTL8367C_REG_UNTAG_DSCP_PRI_CFG, RTL8367C_UNTAG_DSCP_PRI_CFG_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_getAsicVlanUntagDscpPriorityEn - * Description: - * Get enable Dscp to untag 1Q priority - * Input: - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanUntagDscpPriorityEn(rtk_uint32* enabled) -{ - return rtl8367c_getAsicRegBit(RTL8367C_REG_UNTAG_DSCP_PRI_CFG, RTL8367C_UNTAG_DSCP_PRI_CFG_OFFSET, enabled); -} -/* Function Name: - * rtl8367c_setAsicPortBasedFid - * Description: - * Set port based FID - * Input: - * port - Physical port number (0~10) - * fid - Port based fid - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_FID - Invalid FID - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortBasedFid(rtk_uint32 port, rtk_uint32 fid) -{ - rtk_uint32 reg_addr; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if(port < 8) - return rtl8367c_setAsicReg(RTL8367C_PORT_PBFID_REG(port),fid); - else { - reg_addr = RTL8367C_REG_PORT8_PBFID + port-8; - return rtl8367c_setAsicReg(reg_addr, fid); - } - -} -/* Function Name: - * rtl8367c_getAsicPortBasedFid - * Description: - * Get port based FID - * Input: - * port - Physical port number (0~7) - * pFid - Port based fid - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortBasedFid(rtk_uint32 port, rtk_uint32* pFid) -{ - rtk_uint32 reg_addr; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8) - return rtl8367c_getAsicReg(RTL8367C_PORT_PBFID_REG(port), pFid); - else{ - reg_addr = RTL8367C_REG_PORT8_PBFID + port-8; - return rtl8367c_getAsicReg(reg_addr, pFid); - } -} -/* Function Name: - * rtl8367c_setAsicPortBasedFidEn - * Description: - * Set port based FID selection enable - * Input: - * port - Physical port number (0~10) - * enabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicPortBasedFidEn(rtk_uint32 port, rtk_uint32 enabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_setAsicRegBit(RTL8367C_REG_PORT_PBFIDEN,port, enabled); -} -/* Function Name: - * rtl8367c_getAsicPortBasedFidEn - * Description: - * Get port based FID selection enable - * Input: - * port - Physical port number (0~10) - * pEnabled - 1: enabled, 0: disabled - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicPortBasedFidEn(rtk_uint32 port, rtk_uint32* pEnabled) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBit(RTL8367C_REG_PORT_PBFIDEN,port, pEnabled); -} -/* Function Name: - * rtl8367c_setAsicSpanningTreeStatus - * Description: - * Set spanning tree state per each port - * Input: - * port - Physical port number (0~10) - * msti - Multiple spanning tree instance - * state - Spanning tree state for msti - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_MSTI - Invalid msti parameter - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_MSTP_STATE - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicSpanningTreeStatus(rtk_uint32 port, rtk_uint32 msti, rtk_uint32 state) -{ - rtk_uint32 reg_addr,bits_msk; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(msti > RTL8367C_MSTIMAX) - return RT_ERR_MSTI; - - if(state > STPST_FORWARDING) - return RT_ERR_MSTP_STATE; - - if(port < 8) - return rtl8367c_setAsicRegBits(RTL8367C_VLAN_MSTI_REG(msti,port), RTL8367C_VLAN_MSTI_MASK(port),state); - else{ - reg_addr = RTL8367C_VLAN_MSTI_REG(msti,port); - switch(port){ - case 8: bits_msk = RTL8367C_VLAN_MSTI0_CTRL1_PORT8_STATE_MASK;break; - case 9: bits_msk = RTL8367C_VLAN_MSTI0_CTRL1_PORT9_STATE_MASK;break; - case 10: bits_msk = RTL8367C_VLAN_MSTI0_CTRL1_PORT10_STATE_MASK;break; - } - return rtl8367c_setAsicRegBits(reg_addr, bits_msk,state); - } -} -/* Function Name: - * rtl8367c_getAsicSpanningTreeStatus - * Description: - * Set spanning tree state per each port - * Input: - * port - Physical port number (0~10) - * msti - Multiple spanning tree instance - * pState - Spanning tree state for msti - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_MSTI - Invalid msti parameter - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicSpanningTreeStatus(rtk_uint32 port, rtk_uint32 msti, rtk_uint32* pState) -{ - rtk_uint32 reg_addr,bits_msk; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(msti > RTL8367C_MSTIMAX) - return RT_ERR_MSTI; - - if(port < 8) - return rtl8367c_getAsicRegBits(RTL8367C_VLAN_MSTI_REG(msti,port), RTL8367C_VLAN_MSTI_MASK(port), pState); - else{ - reg_addr = RTL8367C_VLAN_MSTI_REG(msti,port); - switch(port){ - case 8: bits_msk = RTL8367C_VLAN_MSTI0_CTRL1_PORT8_STATE_MASK;break; - case 9: bits_msk = RTL8367C_VLAN_MSTI0_CTRL1_PORT9_STATE_MASK;break; - case 10: bits_msk = RTL8367C_VLAN_MSTI0_CTRL1_PORT10_STATE_MASK;break; - } - return rtl8367c_getAsicRegBits(reg_addr, bits_msk, pState); - } - -} - -/* Function Name: - * rtl8367c_setAsicVlanTransparent - * Description: - * Set VLAN transparent - * Input: - * port - Physical port number (0~10) - * portmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanTransparent(rtk_uint32 port, rtk_uint32 portmask) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - return rtl8367c_setAsicRegBits(RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL0 + port, RTL8367C_VLAN_EGRESS_TRANS_CTRL0_MASK, portmask); -} - -/* Function Name: - * rtl8367c_getAsicVlanTransparent - * Description: - * Get VLAN transparent - * Input: - * port - Physical port number (0~10) - * Output: - * pPortmask - Ingress port mask - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanTransparent(rtk_uint32 port, rtk_uint32 *pPortmask) -{ - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - return rtl8367c_getAsicRegBits(RTL8367C_REG_VLAN_EGRESS_TRANS_CTRL0 + port, RTL8367C_VLAN_EGRESS_TRANS_CTRL0_MASK, pPortmask); -} - -/* Function Name: - * rtl8367c_setAsicVlanEgressKeep - * Description: - * Set per egress port VLAN keep mode - * Input: - * port - Physical port number (0~10) - * portmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_MASK - Invalid portmask - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_setAsicVlanEgressKeep(rtk_uint32 port, rtk_uint32 portmask) -{ - rtk_uint32 regAddr, bit_mask; - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(portmask > RTL8367C_PORTMASK) - return RT_ERR_PORT_MASK; - - if(port < 8){ - retVal = rtl8367c_setAsicRegBits(RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL0 + (port>>1),RTL8367C_PORT0_VLAN_KEEP_MASK_MASK<<((port&1)*8),portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL0_EXT + (port>>1); - bit_mask = RTL8367C_PORT0_VLAN_KEEP_MASK_EXT_MASK; - bit_mask <<= (port&1)*3; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, (portmask>>8)&0x7); - if(retVal != RT_ERR_OK) - return retVal; - } - else{ - switch(port){ - case 8: - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4; - bit_mask = RTL8367C_PORT8_VLAN_KEEP_MASK_MASK; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4_EXT; - bit_mask = RTL8367C_PORT8_VLAN_KEEP_MASK_EXT_MASK; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, (portmask>>8)&0x7); - if(retVal != RT_ERR_OK) - return retVal; - break; - - case 9: - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4; - bit_mask = RTL8367C_PORT9_VLAN_KEEP_MASK_MASK; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4_EXT; - bit_mask = RTL8367C_PORT9_VLAN_KEEP_MASK_EXT_MASK; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, (portmask>>8)&0x7); - if(retVal != RT_ERR_OK) - return retVal; - break; - - case 10: - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL5; - bit_mask = RTL8367C_VLAN_EGRESS_KEEP_CTRL5_MASK; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, portmask & 0xff); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL5_EXT; - bit_mask = RTL8367C_VLAN_EGRESS_KEEP_CTRL5_EXT_MASK; - retVal = rtl8367c_setAsicRegBits(regAddr, bit_mask, (portmask>>8)&0x7); - if(retVal != RT_ERR_OK) - return retVal; - break; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getAsicVlanEgressKeep - * Description: - * Get per egress port VLAN keep mode - * Input: - * port - Physical port number (0~7) - * pPortmask - portmask(0~0xFF) - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * Note: - * None - */ -ret_t rtl8367c_getAsicVlanEgressKeep(rtk_uint32 port, rtk_uint32* pPortmask) -{ - rtk_uint32 regAddr, bit_mask, regval_l, regval_h; - ret_t retVal; - - if(port > RTL8367C_PORTIDMAX) - return RT_ERR_PORT_ID; - - if(port < 8){ - retVal = rtl8367c_getAsicRegBits(RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL0 + (port>>1),RTL8367C_PORT0_VLAN_KEEP_MASK_MASK<<((port&1)*8),®val_l); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL0_EXT + (port>>1); - bit_mask = RTL8367C_PORT0_VLAN_KEEP_MASK_EXT_MASK; - bit_mask <<= (port&1)*3; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_h); - if(retVal != RT_ERR_OK) - return retVal; - *pPortmask = (regval_h << 8) | regval_l; - } - else{ - switch(port){ - case 8: - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4; - bit_mask = RTL8367C_PORT8_VLAN_KEEP_MASK_MASK; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_l); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4_EXT; - bit_mask = RTL8367C_PORT8_VLAN_KEEP_MASK_EXT_MASK; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_h); - if(retVal != RT_ERR_OK) - return retVal; - - *pPortmask = (regval_h << 8) | regval_l; - break; - - case 9: - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4; - bit_mask = RTL8367C_PORT9_VLAN_KEEP_MASK_MASK; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_l); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL4_EXT; - bit_mask = RTL8367C_PORT9_VLAN_KEEP_MASK_EXT_MASK; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_h); - if(retVal != RT_ERR_OK) - return retVal; - - *pPortmask = (regval_h << 8) | regval_l; - break; - - case 10: - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL5; - bit_mask = RTL8367C_VLAN_EGRESS_KEEP_CTRL5_MASK; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_l); - if(retVal != RT_ERR_OK) - return retVal; - regAddr = RTL8367C_REG_VLAN_EGRESS_KEEP_CTRL5_EXT; - bit_mask = RTL8367C_VLAN_EGRESS_KEEP_CTRL5_EXT_MASK; - retVal = rtl8367c_getAsicRegBits(regAddr, bit_mask, ®val_h); - if(retVal != RT_ERR_OK) - return retVal; - - *pPortmask = (regval_h << 8) | regval_l; - break; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_setReservedVidAction - * Description: - * Set reserved VID action - * Input: - * vid0Action - VID 0 action - * vid4095Action - VID 4095 action - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error input - * Note: - * None - */ -ret_t rtl8367c_setReservedVidAction(rtk_uint32 vid0Action, rtk_uint32 vid4095Action) -{ - ret_t retVal; - - if(vid0Action >= RES_VID_ACT_END) - return RT_ERR_INPUT; - - if(vid4095Action >= RES_VID_ACT_END) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL, RTL8367C_VLAN_VID0_TYPE_OFFSET, vid0Action)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL, RTL8367C_VLAN_VID4095_TYPE_OFFSET, vid4095Action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getReservedVidAction - * Description: - * Get reserved VID action - * Input: - * pVid0Action - VID 0 action - * pVid4095Action - VID 4095 action - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * None - */ -ret_t rtl8367c_getReservedVidAction(rtk_uint32 *pVid0Action, rtk_uint32 *pVid4095Action) -{ - ret_t retVal; - - if(pVid0Action == NULL) - return RT_ERR_NULL_POINTER; - - if(pVid4095Action == NULL) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL, RTL8367C_VLAN_VID0_TYPE_OFFSET, pVid0Action)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL, RTL8367C_VLAN_VID4095_TYPE_OFFSET, pVid4095Action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtl8367c_setRealKeepRemarkEn - * Description: - * Set Real Keep Remark - * Input: - * enabled - 0: 1P remarking is forbidden at real keep packet, 1: 1P remarking is enabled at real keep packet - * Output: - * None - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error input - * Note: - * None - */ -ret_t rtl8367c_setRealKeepRemarkEn(rtk_uint32 enabled) -{ - ret_t retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL, RTL8367C_VLAN_1P_REMARK_BYPASS_REALKEEP_OFFSET, enabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_getRealKeepRemarkEn - * Description: - * Get Real Keep Remark - * Input: - * None - * Output: - * pEnabled - 0: 1P remarking is forbidden at real keep packet, 1: 1P remarking is enabled at real keep packet - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error input - * Note: - * None - */ -ret_t rtl8367c_getRealKeepRemarkEn(rtk_uint32 *pEnabled) -{ - ret_t retVal; - - if((retVal = rtl8367c_getAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL, RTL8367C_VLAN_1P_REMARK_BYPASS_REALKEEP_OFFSET, pEnabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtl8367c_resetVlan - * Description: - * Reset VLAN table - * Input: - * None. - * Output: - * None. - * Return: - * RT_ERR_OK - Success - * RT_ERR_SMI - SMI access error - * Note: - * None - */ -ret_t rtl8367c_resetVlan(void) -{ - ret_t retVal; - - if((retVal = rtl8367c_setAsicRegBit(RTL8367C_REG_VLAN_EXT_CTRL2, RTL8367C_VLAN_EXT_CTRL2_OFFSET, 1)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/smi.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/smi.c deleted file mode 100644 index c272cad48e..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/smi.c +++ /dev/null @@ -1,444 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * Purpose : RTL8367C switch low-level function for access register - * Feature : SMI related functions - * - */ - - -#include -#include -#include "rtk_error.h" - - -#if defined(MDC_MDIO_OPERATION) -/*******************************************************************************/ -/* MDC/MDIO porting */ -/*******************************************************************************/ -/* define the PHY ID currently used */ -/* carlos */ -#if 0 -#define MDC_MDIO_PHY_ID 0 /* PHY ID 0 or 29 */ -#else -#define MDC_MDIO_PHY_ID 29 /* PHY ID 0 or 29 */ -#endif - -/* MDC/MDIO, redefine/implement the following Macro */ /*carlos*/ -#if 0 -#define MDC_MDIO_WRITE(preamableLength, phyID, regID, data) -#define MDC_MDIO_READ(preamableLength, phyID, regID, pData) -#else -#define u32 unsigned int -extern u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data); -extern u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data); - -#define MDC_MDIO_WRITE(preamableLength, phyID, regID, data) mii_mgr_write(phyID, regID, data) -#define MDC_MDIO_READ(preamableLength, phyID, regID, pData) mii_mgr_read(phyID, regID, pData) -#endif - - - - - -#elif defined(SPI_OPERATION) -/*******************************************************************************/ -/* SPI porting */ -/*******************************************************************************/ -/* SPI, redefine/implement the following Macro */ -#define SPI_WRITE(data, length) -#define SPI_READ(pData, length) - - - - - -#else -/*******************************************************************************/ -/* I2C porting */ -/*******************************************************************************/ -/* Define the GPIO ID for SCK & SDA */ -rtk_uint32 smi_SCK = 1; /* GPIO used for SMI Clock Generation */ -rtk_uint32 smi_SDA = 2; /* GPIO used for SMI Data signal */ - -/* I2C, redefine/implement the following Macro */ -#define GPIO_DIRECTION_SET(gpioID, direction) -#define GPIO_DATA_SET(gpioID, data) -#define GPIO_DATA_GET(gpioID, pData) - - - - - -#endif - -static void rtlglue_drvMutexLock(void) -{ - /* It is empty currently. Implement this function if Lock/Unlock function is needed */ - return; -} - -static void rtlglue_drvMutexUnlock(void) -{ - /* It is empty currently. Implement this function if Lock/Unlock function is needed */ - return; -} - - - -#if defined(MDC_MDIO_OPERATION) || defined(SPI_OPERATION) - /* No local function in MDC/MDIO & SPI mode */ -#else -static void _smi_start(void) -{ - - /* change GPIO pin to Output only */ - GPIO_DIRECTION_SET(smi_SCK, GPIO_DIR_OUT); - GPIO_DIRECTION_SET(smi_SDA, GPIO_DIR_OUT); - - /* Initial state: SCK: 0, SDA: 1 */ - GPIO_DATA_SET(smi_SCK, 0); - GPIO_DATA_SET(smi_SDA, 1); - CLK_DURATION(DELAY); - - /* CLK 1: 0 -> 1, 1 -> 0 */ - GPIO_DATA_SET(smi_SCK, 1); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 0); - CLK_DURATION(DELAY); - - /* CLK 2: */ - GPIO_DATA_SET(smi_SCK, 1); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SDA, 0); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 0); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SDA, 1); - -} - - - -static void _smi_writeBit(rtk_uint16 signal, rtk_uint32 bitLen) -{ - for( ; bitLen > 0; bitLen--) - { - CLK_DURATION(DELAY); - - /* prepare data */ - if ( signal & (1<<(bitLen-1)) ) - { - GPIO_DATA_SET(smi_SDA, 1); - } - else - { - GPIO_DATA_SET(smi_SDA, 0); - } - CLK_DURATION(DELAY); - - /* clocking */ - GPIO_DATA_SET(smi_SCK, 1); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 0); - } -} - - - -static void _smi_readBit(rtk_uint32 bitLen, rtk_uint32 *rData) -{ - rtk_uint32 u = 0; - - /* change GPIO pin to Input only */ - GPIO_DIRECTION_SET(smi_SDA, GPIO_DIR_IN); - - for (*rData = 0; bitLen > 0; bitLen--) - { - CLK_DURATION(DELAY); - - /* clocking */ - GPIO_DATA_SET(smi_SCK, 1); - CLK_DURATION(DELAY); - GPIO_DATA_GET(smi_SDA, &u); - GPIO_DATA_SET(smi_SCK, 0); - - *rData |= (u << (bitLen - 1)); - } - - /* change GPIO pin to Output only */ - GPIO_DIRECTION_SET(smi_SDA, GPIO_DIR_OUT); -} - - - -static void _smi_stop(void) -{ - - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SDA, 0); - GPIO_DATA_SET(smi_SCK, 1); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SDA, 1); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 1); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 0); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 1); - - /* add a click */ - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 0); - CLK_DURATION(DELAY); - GPIO_DATA_SET(smi_SCK, 1); - - - /* change GPIO pin to Input only */ - GPIO_DIRECTION_SET(smi_SDA, GPIO_DIR_IN); - GPIO_DIRECTION_SET(smi_SCK, GPIO_DIR_IN); -} - -#endif /* End of #if defined(MDC_MDIO_OPERATION) || defined(SPI_OPERATION) */ - -rtk_int32 smi_read(rtk_uint32 mAddrs, rtk_uint32 *rData) -{ -#if (!defined(MDC_MDIO_OPERATION) && !defined(SPI_OPERATION)) - rtk_uint32 rawData=0, ACK; - rtk_uint8 con; - rtk_uint32 ret = RT_ERR_OK; -#endif - - if(mAddrs > 0xFFFF) - return RT_ERR_INPUT; - - if(rData == NULL) - return RT_ERR_NULL_POINTER; - -#if defined(MDC_MDIO_OPERATION) - - /* Lock */ - rtlglue_drvMutexLock(); - - /* Write address control code to register 31 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_CTRL0_REG, MDC_MDIO_ADDR_OP); - - /* Write address to register 23 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_ADDRESS_REG, mAddrs); - - /* Write read control code to register 21 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_CTRL1_REG, MDC_MDIO_READ_OP); - - /* Read data from register 25 */ - MDC_MDIO_READ(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_DATA_READ_REG, rData); - - /* Unlock */ - rtlglue_drvMutexUnlock(); - - return RT_ERR_OK; - -#elif defined(SPI_OPERATION) - - /* Lock */ - rtlglue_drvMutexLock(); - - /* Write 8 bits READ OP_CODE */ - SPI_WRITE(SPI_READ_OP, SPI_READ_OP_LEN); - - /* Write 16 bits register address */ - SPI_WRITE(mAddrs, SPI_REG_LEN); - - /* Read 16 bits data */ - SPI_READ(rData, SPI_DATA_LEN); - - /* Unlock */ - rtlglue_drvMutexUnlock(); - - return RT_ERR_OK; - -#else - - /*Disable CPU interrupt to ensure that the SMI operation is atomic. - The API is based on RTL865X, rewrite the API if porting to other platform.*/ - rtlglue_drvMutexLock(); - - _smi_start(); /* Start SMI */ - - _smi_writeBit(0x0b, 4); /* CTRL code: 4'b1011 for RTL8370 */ - - _smi_writeBit(0x4, 3); /* CTRL code: 3'b100 */ - - _smi_writeBit(0x1, 1); /* 1: issue READ command */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for issuing READ command*/ - } while ((ACK != 0) && (con < ack_timer)); - - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_writeBit((mAddrs&0xff), 8); /* Set reg_addr[7:0] */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for setting reg_addr[7:0] */ - } while ((ACK != 0) && (con < ack_timer)); - - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_writeBit((mAddrs>>8), 8); /* Set reg_addr[15:8] */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK by RTL8369 */ - } while ((ACK != 0) && (con < ack_timer)); - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_readBit(8, &rawData); /* Read DATA [7:0] */ - *rData = rawData&0xff; - - _smi_writeBit(0x00, 1); /* ACK by CPU */ - - _smi_readBit(8, &rawData); /* Read DATA [15: 8] */ - - _smi_writeBit(0x01, 1); /* ACK by CPU */ - *rData |= (rawData<<8); - - _smi_stop(); - - rtlglue_drvMutexUnlock();/*enable CPU interrupt*/ - - return ret; -#endif /* end of #if defined(MDC_MDIO_OPERATION) */ -} - - - -rtk_int32 smi_write(rtk_uint32 mAddrs, rtk_uint32 rData) -{ -#if (!defined(MDC_MDIO_OPERATION) && !defined(SPI_OPERATION)) - rtk_int8 con; - rtk_uint32 ACK; - rtk_uint32 ret = RT_ERR_OK; -#endif - - if(mAddrs > 0xFFFF) - return RT_ERR_INPUT; - - if(rData > 0xFFFF) - return RT_ERR_INPUT; - -#if defined(MDC_MDIO_OPERATION) - - /* Lock */ - rtlglue_drvMutexLock(); - - /* Write address control code to register 31 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_CTRL0_REG, MDC_MDIO_ADDR_OP); - - /* Write address to register 23 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_ADDRESS_REG, mAddrs); - - /* Write data to register 24 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_DATA_WRITE_REG, rData); - - /* Write data control code to register 21 */ - MDC_MDIO_WRITE(MDC_MDIO_PREAMBLE_LEN, MDC_MDIO_PHY_ID, MDC_MDIO_CTRL1_REG, MDC_MDIO_WRITE_OP); - - /* Unlock */ - rtlglue_drvMutexUnlock(); - - return RT_ERR_OK; - -#elif defined(SPI_OPERATION) - - /* Lock */ - rtlglue_drvMutexLock(); - - /* Write 8 bits WRITE OP_CODE */ - SPI_WRITE(SPI_WRITE_OP, SPI_WRITE_OP_LEN); - - /* Write 16 bits register address */ - SPI_WRITE(mAddrs, SPI_REG_LEN); - - /* Write 16 bits data */ - SPI_WRITE(rData, SPI_DATA_LEN); - - /* Unlock */ - rtlglue_drvMutexUnlock(); - - return RT_ERR_OK; -#else - - /*Disable CPU interrupt to ensure that the SMI operation is atomic. - The API is based on RTL865X, rewrite the API if porting to other platform.*/ - rtlglue_drvMutexLock(); - - _smi_start(); /* Start SMI */ - - _smi_writeBit(0x0b, 4); /* CTRL code: 4'b1011 for RTL8370*/ - - _smi_writeBit(0x4, 3); /* CTRL code: 3'b100 */ - - _smi_writeBit(0x0, 1); /* 0: issue WRITE command */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for issuing WRITE command*/ - } while ((ACK != 0) && (con < ack_timer)); - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_writeBit((mAddrs&0xff), 8); /* Set reg_addr[7:0] */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for setting reg_addr[7:0] */ - } while ((ACK != 0) && (con < ack_timer)); - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_writeBit((mAddrs>>8), 8); /* Set reg_addr[15:8] */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for setting reg_addr[15:8] */ - } while ((ACK != 0) && (con < ack_timer)); - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_writeBit(rData&0xff, 8); /* Write Data [7:0] out */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for writting data [7:0] */ - } while ((ACK != 0) && (con < ack_timer)); - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_writeBit(rData>>8, 8); /* Write Data [15:8] out */ - - con = 0; - do { - con++; - _smi_readBit(1, &ACK); /* ACK for writting data [15:8] */ - } while ((ACK != 0) && (con < ack_timer)); - if (ACK != 0) ret = RT_ERR_FAILED; - - _smi_stop(); - - rtlglue_drvMutexUnlock();/*enable CPU interrupt*/ - - return ret; -#endif /* end of #if defined(MDC_MDIO_OPERATION) */ -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/stat.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/stat.c deleted file mode 100644 index 3a328b0ca4..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/stat.c +++ /dev/null @@ -1,626 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in MIB module. - * - */ - -#include -#include -#include -#include - -#include -#include - -/* Function Name: - * rtk_stat_global_reset - * Description: - * Reset global MIB counter. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Reset MIB counter of ports. API will use global reset while port mask is all-ports. - */ -rtk_api_ret_t rtk_stat_global_reset(void) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_setAsicMIBsCounterReset(TRUE,FALSE, 0)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_port_reset - * Description: - * Reset per port MIB counter by port. - * Input: - * port - port id. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -rtk_api_ret_t rtk_stat_port_reset(rtk_port_t port) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_setAsicMIBsCounterReset(FALSE,FALSE,1 << rtk_switch_port_L2P_get(port))) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_queueManage_reset - * Description: - * Reset queue manage MIB counter. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -rtk_api_ret_t rtk_stat_queueManage_reset(void) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_setAsicMIBsCounterReset(FALSE,TRUE,0)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_stat_global_get - * Description: - * Get global MIB counter - * Input: - * cntr_idx - global counter index. - * Output: - * pCntr - global counter value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get global MIB counter by index definition. - */ -rtk_api_ret_t rtk_stat_global_get(rtk_stat_global_type_t cntr_idx, rtk_stat_counter_t *pCntr) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pCntr) - return RT_ERR_NULL_POINTER; - - if (cntr_idx!=DOT1D_TP_LEARNED_ENTRY_DISCARDS_INDEX) - return RT_ERR_STAT_INVALID_GLOBAL_CNTR; - - if ((retVal = rtl8367c_getAsicMIBsCounter(0, cntr_idx, pCntr)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_global_getAll - * Description: - * Get all global MIB counter - * Input: - * None - * Output: - * pGlobal_cntrs - global counter structure. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get all global MIB counter by index definition. - */ -rtk_api_ret_t rtk_stat_global_getAll(rtk_stat_global_cntr_t *pGlobal_cntrs) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pGlobal_cntrs) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicMIBsCounter(0,DOT1D_TP_LEARNED_ENTRY_DISCARDS_INDEX, &pGlobal_cntrs->dot1dTpLearnedEntryDiscards)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -#define MIB_NOT_SUPPORT (0xFFFF) -static rtk_api_ret_t _get_asic_mib_idx(rtk_stat_port_type_t cnt_idx, RTL8367C_MIBCOUNTER *pMib_idx) -{ - RTL8367C_MIBCOUNTER mib_asic_idx[STAT_PORT_CNTR_END]= - { - ifInOctets, /* STAT_IfInOctets */ - dot3StatsFCSErrors, /* STAT_Dot3StatsFCSErrors */ - dot3StatsSymbolErrors, /* STAT_Dot3StatsSymbolErrors */ - dot3InPauseFrames, /* STAT_Dot3InPauseFrames */ - dot3ControlInUnknownOpcodes, /* STAT_Dot3ControlInUnknownOpcodes */ - etherStatsFragments, /* STAT_EtherStatsFragments */ - etherStatsJabbers, /* STAT_EtherStatsJabbers */ - ifInUcastPkts, /* STAT_IfInUcastPkts */ - etherStatsDropEvents, /* STAT_EtherStatsDropEvents */ - etherStatsOctets, /* STAT_EtherStatsOctets */ - etherStatsUnderSizePkts, /* STAT_EtherStatsUnderSizePkts */ - etherOversizeStats, /* STAT_EtherOversizeStats */ - etherStatsPkts64Octets, /* STAT_EtherStatsPkts64Octets */ - etherStatsPkts65to127Octets, /* STAT_EtherStatsPkts65to127Octets */ - etherStatsPkts128to255Octets, /* STAT_EtherStatsPkts128to255Octets */ - etherStatsPkts256to511Octets, /* STAT_EtherStatsPkts256to511Octets */ - etherStatsPkts512to1023Octets, /* STAT_EtherStatsPkts512to1023Octets */ - etherStatsPkts1024to1518Octets, /* STAT_EtherStatsPkts1024to1518Octets */ - ifInMulticastPkts, /* STAT_EtherStatsMulticastPkts */ - ifInBroadcastPkts, /* STAT_EtherStatsBroadcastPkts */ - ifOutOctets, /* STAT_IfOutOctets */ - dot3StatsSingleCollisionFrames, /* STAT_Dot3StatsSingleCollisionFrames */ - dot3StatMultipleCollisionFrames,/* STAT_Dot3StatsMultipleCollisionFrames */ - dot3sDeferredTransmissions, /* STAT_Dot3StatsDeferredTransmissions */ - dot3StatsLateCollisions, /* STAT_Dot3StatsLateCollisions */ - etherStatsCollisions, /* STAT_EtherStatsCollisions */ - dot3StatsExcessiveCollisions, /* STAT_Dot3StatsExcessiveCollisions */ - dot3OutPauseFrames, /* STAT_Dot3OutPauseFrames */ - MIB_NOT_SUPPORT, /* STAT_Dot1dBasePortDelayExceededDiscards */ - dot1dTpPortInDiscards, /* STAT_Dot1dTpPortInDiscards */ - ifOutUcastPkts, /* STAT_IfOutUcastPkts */ - ifOutMulticastPkts, /* STAT_IfOutMulticastPkts */ - ifOutBroadcastPkts, /* STAT_IfOutBroadcastPkts */ - outOampduPkts, /* STAT_OutOampduPkts */ - inOampduPkts, /* STAT_InOampduPkts */ - MIB_NOT_SUPPORT, /* STAT_PktgenPkts */ - inMldChecksumError, /* STAT_InMldChecksumError */ - inIgmpChecksumError, /* STAT_InIgmpChecksumError */ - inMldSpecificQuery, /* STAT_InMldSpecificQuery */ - inMldGeneralQuery, /* STAT_InMldGeneralQuery */ - inIgmpSpecificQuery, /* STAT_InIgmpSpecificQuery */ - inIgmpGeneralQuery, /* STAT_InIgmpGeneralQuery */ - inMldLeaves, /* STAT_InMldLeaves */ - inIgmpLeaves, /* STAT_InIgmpInterfaceLeaves */ - inIgmpJoinsSuccess, /* STAT_InIgmpJoinsSuccess */ - inIgmpJoinsFail, /* STAT_InIgmpJoinsFail */ - inMldJoinsSuccess, /* STAT_InMldJoinsSuccess */ - inMldJoinsFail, /* STAT_InMldJoinsFail */ - inReportSuppressionDrop, /* STAT_InReportSuppressionDrop */ - inLeaveSuppressionDrop, /* STAT_InLeaveSuppressionDrop */ - outIgmpReports, /* STAT_OutIgmpReports */ - outIgmpLeaves, /* STAT_OutIgmpLeaves */ - outIgmpGeneralQuery, /* STAT_OutIgmpGeneralQuery */ - outIgmpSpecificQuery, /* STAT_OutIgmpSpecificQuery */ - outMldReports, /* STAT_OutMldReports */ - outMldLeaves, /* STAT_OutMldLeaves */ - outMldGeneralQuery, /* STAT_OutMldGeneralQuery */ - outMldSpecificQuery, /* STAT_OutMldSpecificQuery */ - inKnownMulticastPkts, /* STAT_InKnownMulticastPkts */ - ifInMulticastPkts, /* STAT_IfInMulticastPkts */ - ifInBroadcastPkts, /* STAT_IfInBroadcastPkts */ - ifOutDiscards /* STAT_IfOutDiscards */ - }; - - if(cnt_idx >= STAT_PORT_CNTR_END) - return RT_ERR_STAT_INVALID_PORT_CNTR; - - if(mib_asic_idx[cnt_idx] == MIB_NOT_SUPPORT) - return RT_ERR_CHIP_NOT_SUPPORTED; - - *pMib_idx = mib_asic_idx[cnt_idx]; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_port_get - * Description: - * Get per port MIB counter by index - * Input: - * port - port id. - * cntr_idx - port counter index. - * Output: - * pCntr - MIB retrived counter. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Get per port MIB counter by index definition. - */ -rtk_api_ret_t rtk_stat_port_get(rtk_port_t port, rtk_stat_port_type_t cntr_idx, rtk_stat_counter_t *pCntr) -{ - rtk_api_ret_t retVal; - RTL8367C_MIBCOUNTER mib_idx; - rtk_stat_counter_t second_cnt; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pCntr) - return RT_ERR_NULL_POINTER; - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - if (cntr_idx>=STAT_PORT_CNTR_END) - return RT_ERR_STAT_INVALID_PORT_CNTR; - - if((retVal = _get_asic_mib_idx(cntr_idx, &mib_idx)) != RT_ERR_OK) - return retVal; - - if(mib_idx == MIB_NOT_SUPPORT) - return RT_ERR_CHIP_NOT_SUPPORTED; - - if ((retVal = rtl8367c_getAsicMIBsCounter(rtk_switch_port_L2P_get(port), mib_idx, pCntr)) != RT_ERR_OK) - return retVal; - - if(cntr_idx == STAT_EtherStatsMulticastPkts) - { - if((retVal = _get_asic_mib_idx(STAT_IfOutMulticastPkts, &mib_idx)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicMIBsCounter(rtk_switch_port_L2P_get(port), mib_idx, &second_cnt)) != RT_ERR_OK) - return retVal; - - *pCntr += second_cnt; - } - - if(cntr_idx == STAT_EtherStatsBroadcastPkts) - { - if((retVal = _get_asic_mib_idx(STAT_IfOutBroadcastPkts, &mib_idx)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicMIBsCounter(rtk_switch_port_L2P_get(port), mib_idx, &second_cnt)) != RT_ERR_OK) - return retVal; - - *pCntr += second_cnt; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_port_getAll - * Description: - * Get all counters of one specified port in the specified device. - * Input: - * port - port id. - * Output: - * pPort_cntrs - buffer pointer of counter value. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get all MIB counters of one port. - */ -rtk_api_ret_t rtk_stat_port_getAll(rtk_port_t port, rtk_stat_port_cntr_t *pPort_cntrs) -{ - rtk_api_ret_t retVal; - rtk_uint32 mibIndex; - rtk_uint64 mibCounter; - rtk_uint32 *accessPtr; - /* address offset to MIBs counter */ - CONST_T rtk_uint16 mibLength[STAT_PORT_CNTR_END]= { - 2,1,1,1,1,1,1,1,1, - 2,1,1,1,1,1,1,1,1,1,1, - 2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPort_cntrs) - return RT_ERR_NULL_POINTER; - - /* Check port valid */ - RTK_CHK_PORT_VALID(port); - - accessPtr = (rtk_uint32*)pPort_cntrs; - for (mibIndex=0;mibIndex RTL8367C_MIB_MAX_LOG_CNT_IDX) - return RT_ERR_OUT_OF_RANGE; - - if((idx % 2) == 1) - return RT_ERR_INPUT; - - if(mode >= LOGGING_MODE_END) - return RT_ERR_OUT_OF_RANGE; - - if(type >= LOGGING_TYPE_END) - return RT_ERR_OUT_OF_RANGE; - - if((retVal = rtl8367c_setAsicMIBsLoggingType((idx / 2), (rtk_uint32)type)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicMIBsLoggingMode((idx / 2), (rtk_uint32)mode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_logging_counterCfg_get - * Description: - * Get the type and mode of Logging Counter - * Input: - * idx - The index of Logging Counter. Should be even number only.(0,2,4,6,8.....30) - * Output: - * pMode - 32 bits or 64 bits mode - * pType - Packet counter or byte counter - * Return: - * RT_ERR_OK - OK - * RT_ERR_OUT_OF_RANGE - Out of range. - * RT_ERR_FAILED - Failed - * RT_ERR_NULL_POINTER - NULL Pointer - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * Get the type and mode of Logging Counter. - */ -rtk_api_ret_t rtk_stat_logging_counterCfg_get(rtk_uint32 idx, rtk_logging_counter_mode_t *pMode, rtk_logging_counter_type_t *pType) -{ - rtk_api_ret_t retVal; - rtk_uint32 type, mode; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(idx > RTL8367C_MIB_MAX_LOG_CNT_IDX) - return RT_ERR_OUT_OF_RANGE; - - if((idx % 2) == 1) - return RT_ERR_INPUT; - - if(pMode == NULL) - return RT_ERR_NULL_POINTER; - - if(pType == NULL) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicMIBsLoggingType((idx / 2), &type)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicMIBsLoggingMode((idx / 2), &mode)) != RT_ERR_OK) - return retVal; - - *pMode = (rtk_logging_counter_mode_t)mode; - *pType = (rtk_logging_counter_type_t)type; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_stat_logging_counter_reset - * Description: - * Reset Logging Counter - * Input: - * idx - The index of Logging Counter. (0~31) - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_OUT_OF_RANGE - Out of range. - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Reset Logging Counter. - */ -rtk_api_ret_t rtk_stat_logging_counter_reset(rtk_uint32 idx) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(idx > RTL8367C_MIB_MAX_LOG_CNT_IDX) - return RT_ERR_OUT_OF_RANGE; - - if((retVal = rtl8367c_setAsicMIBsResetLoggingCounter(idx)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_logging_counter_get - * Description: - * Get Logging Counter - * Input: - * idx - The index of Logging Counter. (0~31) - * Output: - * pCnt - Logging counter value - * Return: - * RT_ERR_OK - OK - * RT_ERR_OUT_OF_RANGE - Out of range. - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Get Logging Counter. - */ -rtk_api_ret_t rtk_stat_logging_counter_get(rtk_uint32 idx, rtk_uint32 *pCnt) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pCnt) - return RT_ERR_NULL_POINTER; - - if(idx > RTL8367C_MIB_MAX_LOG_CNT_IDX) - return RT_ERR_OUT_OF_RANGE; - - if((retVal = rtl8367c_getAsicMIBsLogCounter(idx, pCnt)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_lengthMode_set - * Description: - * Set Legnth mode. - * Input: - * txMode - The length counting mode - * rxMode - The length counting mode - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Out of range. - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * - */ -rtk_api_ret_t rtk_stat_lengthMode_set(rtk_stat_lengthMode_t txMode, rtk_stat_lengthMode_t rxMode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(txMode >= LENGTH_MODE_END) - return RT_ERR_INPUT; - - if(rxMode >= LENGTH_MODE_END) - return RT_ERR_INPUT; - - if((retVal = rtl8367c_setAsicMIBsLength((rtk_uint32)txMode, (rtk_uint32)rxMode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stat_lengthMode_get - * Description: - * Get Legnth mode. - * Input: - * None. - * Output: - * pTxMode - The length counting mode - * pRxMode - The length counting mode - * Return: - * RT_ERR_OK - OK - * RT_ERR_INPUT - Out of range. - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - */ -rtk_api_ret_t rtk_stat_lengthMode_get(rtk_stat_lengthMode_t *pTxMode, rtk_stat_lengthMode_t *pRxMode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pTxMode) - return RT_ERR_NULL_POINTER; - - if(NULL == pRxMode) - return RT_ERR_NULL_POINTER; - - if((retVal = rtl8367c_getAsicMIBsLength((rtk_uint32 *)pTxMode, (rtk_uint32 *)pRxMode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/storm.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/storm.c deleted file mode 100644 index 13cf4e3cb4..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/storm.c +++ /dev/null @@ -1,816 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Storm module. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Function Name: - * rtk_rate_stormControlMeterIdx_set - * Description: - * Set the storm control meter index. - * Input: - * port - port id - * storm_type - storm group type - * index - storm control meter index. - * Output: - * None. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - Invalid port id - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlMeterIdx_set(rtk_port_t port, rtk_rate_storm_group_t stormType, rtk_uint32 index) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_setAsicStormFilterUnknownUnicastMeter(rtk_switch_port_L2P_get(port), index))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterUnknownMulticastMeter(rtk_switch_port_L2P_get(port), index))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterMulticastMeter(rtk_switch_port_L2P_get(port), index))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_setAsicStormFilterBroadcastMeter(rtk_switch_port_L2P_get(port), index))!=RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlMeterIdx_get - * Description: - * Get the storm control meter index. - * Input: - * port - port id - * storm_type - storm group type - * Output: - * pIndex - storm control meter index. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_PORT_ID - Invalid port id - * RT_ERR_FILTER_METER_ID - Invalid meter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlMeterIdx_get(rtk_port_t port, rtk_rate_storm_group_t stormType, rtk_uint32 *pIndex) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (NULL == pIndex ) - return RT_ERR_NULL_POINTER; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_getAsicStormFilterUnknownUnicastMeter(rtk_switch_port_L2P_get(port), pIndex))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterUnknownMulticastMeter(rtk_switch_port_L2P_get(port), pIndex))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterMulticastMeter(rtk_switch_port_L2P_get(port), pIndex))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_getAsicStormFilterBroadcastMeter(rtk_switch_port_L2P_get(port), pIndex))!=RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlPortEnable_set - * Description: - * Set enable status of storm control on specified port. - * Input: - * port - port id - * stormType - storm group type - * enable - enable status of storm control - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlPortEnable_set(rtk_port_t port, rtk_rate_storm_group_t stormType, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_setAsicStormFilterUnknownUnicastEnable(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterUnknownMulticastEnable(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterMulticastEnable(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_setAsicStormFilterBroadcastEnable(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlPortEnable_set - * Description: - * Set enable status of storm control on specified port. - * Input: - * port - port id - * stormType - storm group type - * Output: - * pEnable - enable status of storm control - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_PORT_ID - invalid port id - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlPortEnable_get(rtk_port_t port, rtk_rate_storm_group_t stormType, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (NULL == pEnable) - return RT_ERR_ENABLE; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_getAsicStormFilterUnknownUnicastEnable(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterUnknownMulticastEnable(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterMulticastEnable(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_getAsicStormFilterBroadcastEnable(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_storm_bypass_set - * Description: - * Set bypass storm filter control configuration. - * Input: - * type - Bypass storm filter control type. - * enable - Bypass status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid IFG parameter - * Note: - * - * This API can set per-port bypass stomr filter control frame type including RMA and igmp. - * The bypass frame type is as following: - * - BYPASS_BRG_GROUP, - * - BYPASS_FD_PAUSE, - * - BYPASS_SP_MCAST, - * - BYPASS_1X_PAE, - * - BYPASS_UNDEF_BRG_04, - * - BYPASS_UNDEF_BRG_05, - * - BYPASS_UNDEF_BRG_06, - * - BYPASS_UNDEF_BRG_07, - * - BYPASS_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - BYPASS_UNDEF_BRG_09, - * - BYPASS_UNDEF_BRG_0A, - * - BYPASS_UNDEF_BRG_0B, - * - BYPASS_UNDEF_BRG_0C, - * - BYPASS_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - BYPASS_8021AB, - * - BYPASS_UNDEF_BRG_0F, - * - BYPASS_BRG_MNGEMENT, - * - BYPASS_UNDEFINED_11, - * - BYPASS_UNDEFINED_12, - * - BYPASS_UNDEFINED_13, - * - BYPASS_UNDEFINED_14, - * - BYPASS_UNDEFINED_15, - * - BYPASS_UNDEFINED_16, - * - BYPASS_UNDEFINED_17, - * - BYPASS_UNDEFINED_18, - * - BYPASS_UNDEFINED_19, - * - BYPASS_UNDEFINED_1A, - * - BYPASS_UNDEFINED_1B, - * - BYPASS_UNDEFINED_1C, - * - BYPASS_UNDEFINED_1D, - * - BYPASS_UNDEFINED_1E, - * - BYPASS_UNDEFINED_1F, - * - BYPASS_GMRP, - * - BYPASS_GVRP, - * - BYPASS_UNDEF_GARP_22, - * - BYPASS_UNDEF_GARP_23, - * - BYPASS_UNDEF_GARP_24, - * - BYPASS_UNDEF_GARP_25, - * - BYPASS_UNDEF_GARP_26, - * - BYPASS_UNDEF_GARP_27, - * - BYPASS_UNDEF_GARP_28, - * - BYPASS_UNDEF_GARP_29, - * - BYPASS_UNDEF_GARP_2A, - * - BYPASS_UNDEF_GARP_2B, - * - BYPASS_UNDEF_GARP_2C, - * - BYPASS_UNDEF_GARP_2D, - * - BYPASS_UNDEF_GARP_2E, - * - BYPASS_UNDEF_GARP_2F, - * - BYPASS_IGMP. - * - BYPASS_CDP. - * - BYPASS_CSSTP. - * - BYPASS_LLDP. - */ -rtk_api_ret_t rtk_storm_bypass_set(rtk_storm_bypass_t type, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= BYPASS_END) - return RT_ERR_INPUT; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (type >= 0 && type <= BYPASS_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.discard_storm_filter = enable; - - if ((retVal = rtl8367c_setAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else if(type == BYPASS_IGMP) - { - if ((retVal = rtl8367c_setAsicIGMPBypassStormCTRL(enable)) != RT_ERR_OK) - return retVal; - } - else if (type == BYPASS_CDP) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.discard_storm_filter = enable; - - if ((retVal = rtl8367c_setAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == BYPASS_CSSTP) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.discard_storm_filter = enable; - - if ((retVal = rtl8367c_setAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == BYPASS_LLDP) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.discard_storm_filter = enable; - - if ((retVal = rtl8367c_setAsicRmaLldp(tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_storm_bypass_get - * Description: - * Get bypass storm filter control configuration. - * Input: - * type - Bypass storm filter control type. - * Output: - * pEnable - Bypass status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get per-port bypass stomr filter control frame type including RMA and igmp. - * The bypass frame type is as following: - * - BYPASS_BRG_GROUP, - * - BYPASS_FD_PAUSE, - * - BYPASS_SP_MCAST, - * - BYPASS_1X_PAE, - * - BYPASS_UNDEF_BRG_04, - * - BYPASS_UNDEF_BRG_05, - * - BYPASS_UNDEF_BRG_06, - * - BYPASS_UNDEF_BRG_07, - * - BYPASS_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - BYPASS_UNDEF_BRG_09, - * - BYPASS_UNDEF_BRG_0A, - * - BYPASS_UNDEF_BRG_0B, - * - BYPASS_UNDEF_BRG_0C, - * - BYPASS_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - BYPASS_8021AB, - * - BYPASS_UNDEF_BRG_0F, - * - BYPASS_BRG_MNGEMENT, - * - BYPASS_UNDEFINED_11, - * - BYPASS_UNDEFINED_12, - * - BYPASS_UNDEFINED_13, - * - BYPASS_UNDEFINED_14, - * - BYPASS_UNDEFINED_15, - * - BYPASS_UNDEFINED_16, - * - BYPASS_UNDEFINED_17, - * - BYPASS_UNDEFINED_18, - * - BYPASS_UNDEFINED_19, - * - BYPASS_UNDEFINED_1A, - * - BYPASS_UNDEFINED_1B, - * - BYPASS_UNDEFINED_1C, - * - BYPASS_UNDEFINED_1D, - * - BYPASS_UNDEFINED_1E, - * - BYPASS_UNDEFINED_1F, - * - BYPASS_GMRP, - * - BYPASS_GVRP, - * - BYPASS_UNDEF_GARP_22, - * - BYPASS_UNDEF_GARP_23, - * - BYPASS_UNDEF_GARP_24, - * - BYPASS_UNDEF_GARP_25, - * - BYPASS_UNDEF_GARP_26, - * - BYPASS_UNDEF_GARP_27, - * - BYPASS_UNDEF_GARP_28, - * - BYPASS_UNDEF_GARP_29, - * - BYPASS_UNDEF_GARP_2A, - * - BYPASS_UNDEF_GARP_2B, - * - BYPASS_UNDEF_GARP_2C, - * - BYPASS_UNDEF_GARP_2D, - * - BYPASS_UNDEF_GARP_2E, - * - BYPASS_UNDEF_GARP_2F, - * - BYPASS_IGMP. - * - BYPASS_CDP. - * - BYPASS_CSSTP. - * - BYPASS_LLDP. - */ -rtk_api_ret_t rtk_storm_bypass_get(rtk_storm_bypass_t type, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= BYPASS_END) - return RT_ERR_INPUT; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if (type >= 0 && type <= BYPASS_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.discard_storm_filter; - } - else if(type == BYPASS_IGMP) - { - if ((retVal = rtl8367c_getAsicIGMPBypassStormCTRL(pEnable)) != RT_ERR_OK) - return retVal; - } - else if (type == BYPASS_CDP) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.discard_storm_filter; - } - else if (type == BYPASS_CSSTP) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.discard_storm_filter; - } - else if (type == BYPASS_LLDP) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp,&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.discard_storm_filter; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlExtPortmask_set - * Description: - * Set externsion storm control port mask - * Input: - * pPortmask - port mask - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlExtPortmask_set(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicStormFilterExtEnablePortMask(pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlExtPortmask_get - * Description: - * Set externsion storm control port mask - * Input: - * None - * Output: - * pPortmask - port mask - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlExtPortmask_get(rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPortmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicStormFilterExtEnablePortMask(&pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlExtEnable_set - * Description: - * Set externsion storm control state - * Input: - * stormType - storm group type - * enable - externsion storm control state - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlExtEnable_set(rtk_rate_storm_group_t stormType, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_setAsicStormFilterExtUnknownUnicastEnable(enable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterExtUnknownMulticastEnable(enable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterExtMulticastEnable(enable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_setAsicStormFilterExtBroadcastEnable(enable)) != RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlExtEnable_get - * Description: - * Get externsion storm control state - * Input: - * stormType - storm group type - * Output: - * pEnable - externsion storm control state - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlExtEnable_get(rtk_rate_storm_group_t stormType, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (NULL == pEnable) - return RT_ERR_NULL_POINTER; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_getAsicStormFilterExtUnknownUnicastEnable((rtk_uint32 *)pEnable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterExtUnknownMulticastEnable((rtk_uint32 *)pEnable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterExtMulticastEnable((rtk_uint32 *)pEnable)) != RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_getAsicStormFilterExtBroadcastEnable((rtk_uint32 *)pEnable)) != RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlExtMeterIdx_set - * Description: - * Set externsion storm control meter index - * Input: - * stormType - storm group type - * index - externsion storm control state - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlExtMeterIdx_set(rtk_rate_storm_group_t stormType, rtk_uint32 index) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if (index > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_setAsicStormFilterExtUnknownUnicastMeter(index))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterExtUnknownMulticastMeter(index))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_setAsicStormFilterExtMulticastMeter(index))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_setAsicStormFilterExtBroadcastMeter(index))!=RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_rate_stormControlExtMeterIdx_get - * Description: - * Get externsion storm control meter index - * Input: - * stormType - storm group type - * pIndex - externsion storm control state - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - invalid input parameter - * Note: - * - */ -rtk_api_ret_t rtk_rate_stormControlExtMeterIdx_get(rtk_rate_storm_group_t stormType, rtk_uint32 *pIndex) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (stormType >= STORM_GROUP_END) - return RT_ERR_SFC_UNKNOWN_GROUP; - - if(NULL == pIndex) - return RT_ERR_NULL_POINTER; - - switch (stormType) - { - case STORM_GROUP_UNKNOWN_UNICAST: - if ((retVal = rtl8367c_getAsicStormFilterExtUnknownUnicastMeter(pIndex))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_UNKNOWN_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterExtUnknownMulticastMeter(pIndex))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_MULTICAST: - if ((retVal = rtl8367c_getAsicStormFilterExtMulticastMeter(pIndex))!=RT_ERR_OK) - return retVal; - break; - case STORM_GROUP_BROADCAST: - if ((retVal = rtl8367c_getAsicStormFilterExtBroadcastMeter(pIndex))!=RT_ERR_OK) - return retVal; - break; - default: - break; - } - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c deleted file mode 100644 index bf4ef044d1..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c +++ /dev/null @@ -1,2415 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in SVLAN module. - * - */ - -#include -#include -#include -#include -#include - -#include -#include - -rtk_uint8 svlan_mbrCfgUsage[RTL8367C_SVIDXNO]; -rtk_uint16 svlan_mbrCfgVid[RTL8367C_SVIDXNO]; -rtk_svlan_lookupType_t svlan_lookupType; -/* Function Name: - * rtk_svlan_init - * Description: - * Initialize SVLAN Configuration - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. - * User can set mathced ether type as service provider supported protocol. - */ -rtk_api_ret_t rtk_svlan_init(void) -{ - rtk_uint32 i; - rtk_api_ret_t retVal; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - rtk_uint32 svidx; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /*default use C-priority*/ - if ((retVal = rtl8367c_setAsicSvlanPrioritySel(SPRISEL_CTAGPRI)) != RT_ERR_OK) - return retVal; - - /*Drop SVLAN untag frame*/ - if ((retVal = rtl8367c_setAsicSvlanIngressUntag(UNTAG_DROP)) != RT_ERR_OK) - return retVal; - - /*Drop SVLAN unmatch frame*/ - if ((retVal = rtl8367c_setAsicSvlanIngressUnmatch(UNMATCH_DROP)) != RT_ERR_OK) - return retVal; - - /*Set TPID to 0x88a8*/ - if ((retVal = rtl8367c_setAsicSvlanTpid(0x88a8)) != RT_ERR_OK) - return retVal; - - /*Clean Uplink Port Mask to none*/ - if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(0)) != RT_ERR_OK) - return retVal; - - /*Clean SVLAN Member Configuration*/ - for (i=0; i<= RTL8367C_SVIDXMAX; i++) - { - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - } - - /*Clean C2S Configuration*/ - for (i=0; i<= RTL8367C_C2SIDXMAX; i++) - { - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, 0,0,0)) != RT_ERR_OK) - return retVal; - } - - /*Clean SP2C Configuration*/ - for (i=0; i <= RTL8367C_SP2CMAX ; i++) - { - memset(&svlanSP2CConf, 0, sizeof(rtl8367c_svlan_s2c_t)); - if ((retVal = rtl8367c_setAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - } - - /*Clean MC2S Configuration*/ - for (i=0 ; i<= RTL8367C_MC2SIDXMAX; i++) - { - memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - } - - - if ((retVal = rtk_svlan_lookupType_set(SVLAN_LOOKUP_S64MBRCGF)) != RT_ERR_OK) - return retVal; - - - for (svidx = 0; svidx <= RTL8367C_SVIDXMAX; svidx++) - { - svlan_mbrCfgUsage[svidx] = FALSE; - } - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_servicePort_add - * Description: - * Add one service port in the specified device - * Input: - * port - Port id. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API is setting which port is connected to provider switch. All frames receiving from this port must - * contain accept SVID in S-tag field. - */ -rtk_api_ret_t rtk_svlan_servicePort_add(rtk_port_t port) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&pmsk)) != RT_ERR_OK) - return retVal; - - pmsk = pmsk | (1<RTK_MAX_NUM_OF_PROTO_TYPE) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicSvlanTpid(svlan_tag_id)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_tpidEntry_get - * Description: - * Get accepted S-VLAN ether type setting. - * Input: - * None - * Output: - * pSvlan_tag_id - Ether type of S-tag frame parsing in uplink ports. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is setting which port is connected to provider switch. All frames receiving from this port must - * contain accept SVID in S-tag field. - */ -rtk_api_ret_t rtk_svlan_tpidEntry_get(rtk_svlan_tpid_t *pSvlan_tag_id) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_tag_id) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanTpid(pSvlan_tag_id)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_priorityRef_set - * Description: - * Set S-VLAN upstream priority reference setting. - * Input: - * ref - reference selection parameter. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The API can set the upstream SVLAN tag priority reference source. The related priority - * sources are as following: - * - REF_INTERNAL_PRI, - * - REF_CTAG_PRI, - * - REF_SVLAN_PRI, - * - REF_PB_PRI. - */ -rtk_api_ret_t rtk_svlan_priorityRef_set(rtk_svlan_pri_ref_t ref) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (ref >= REF_PRI_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicSvlanPrioritySel(ref)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_priorityRef_get - * Description: - * Get S-VLAN upstream priority reference setting. - * Input: - * None - * Output: - * pRef - reference selection parameter. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can get the upstream SVLAN tag priority reference source. The related priority - * sources are as following: - * - REF_INTERNAL_PRI, - * - REF_CTAG_PRI, - * - REF_SVLAN_PRI, - * - REF_PB_PRI - */ -rtk_api_ret_t rtk_svlan_priorityRef_get(rtk_svlan_pri_ref_t *pRef) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pRef) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanPrioritySel(pRef)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_memberPortEntry_set - * Description: - * Configure system SVLAN member content - * Input: - * svid - SVLAN id - * psvlan_cfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. - * Note: - * The API can set system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped by default setup. - * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_set(rtk_vlan_t svid, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtk_int32 i; - rtk_uint32 empty_idx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_uint32 phyMbrPmask; - rtk_vlan_cfg_t vlanCfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if(svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->memberport)); - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->untagport)); - - if (pSvlan_cfg->fiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if (pSvlan_cfg->priority > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if (pSvlan_cfg->efiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->efid > RTL8367C_EFIDMAX) - return RT_ERR_L2_FID; - - if(SVLAN_LOOKUP_C4KVLAN == svlan_lookupType) - { - if ((retVal = rtk_vlan_get(svid, &vlanCfg)) != RT_ERR_OK) - return retVal; - - vlanCfg.mbr = pSvlan_cfg->memberport; - vlanCfg.untag = pSvlan_cfg->untagport; - - if ((retVal = rtk_vlan_set(svid, &vlanCfg)) != RT_ERR_OK) - return retVal; - - empty_idx = 0xFF; - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - if (svid == svlan_mbrCfgVid[i] && TRUE == svlan_mbrCfgUsage[i]) - { - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = svid; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - - /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - svlanMemConf.vs_efid = 1; - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - else if (FALSE == svlan_mbrCfgUsage[i] && 0xFF == empty_idx) - { - empty_idx = i; - } - } - - if (empty_idx != 0xFF) - { - svlan_mbrCfgUsage[empty_idx] = TRUE; - svlan_mbrCfgVid[empty_idx] = svid; - - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = svid; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - - /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - svlanMemConf.vs_efid = 1; - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - } - - return RT_ERR_OK; - } - - - empty_idx = 0xFF; - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - /* - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - */ - if (svid == svlan_mbrCfgVid[i] && TRUE == svlan_mbrCfgUsage[i]) - { - svlanMemConf.vs_svid = svid; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_member = phyMbrPmask; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_untag = phyMbrPmask; - - svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; - svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - - /*all items are reset means deleting*/ - if( 0 == svlanMemConf.vs_member && - 0 == svlanMemConf.vs_untag && - 0 == svlanMemConf.vs_force_fid && - 0 == svlanMemConf.vs_fid_msti && - 0 == svlanMemConf.vs_priority && - 0 == svlanMemConf.vs_efiden && - 0 == svlanMemConf.vs_efid) - { - svlan_mbrCfgUsage[i] = FALSE; - svlan_mbrCfgVid[i] = 0; - - /* Clear SVID also */ - svlanMemConf.vs_svid = 0; - } - else - { - svlan_mbrCfgUsage[i] = TRUE; - svlan_mbrCfgVid[i] = svlanMemConf.vs_svid; - - if(0 == svlanMemConf.vs_svid) - { - /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - { - svlanMemConf.vs_efid = 1; - } - } - } - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - else if (FALSE == svlan_mbrCfgUsage[i] && 0xFF == empty_idx) - { - empty_idx = i; - } - } - - if (empty_idx != 0xFF) - { - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = svid; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_member = phyMbrPmask; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_untag = phyMbrPmask; - - svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; - svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - - /*change efid for empty svid 0*/ - if(0 == svlanMemConf.vs_svid) - { /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - { - svlanMemConf.vs_efid = 1; - } - } - - svlan_mbrCfgUsage[empty_idx] = TRUE; - svlan_mbrCfgVid[empty_idx] = svlanMemConf.vs_svid; - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlanMemConf)) != RT_ERR_OK) - { - return retVal; - } - - return RT_ERR_OK; - } - - return RT_ERR_SVLAN_TABLE_FULL; -} - -/* Function Name: - * rtk_svlan_memberPortEntry_get - * Description: - * Get SVLAN member Configure. - * Input: - * svid - SVLAN id - * Output: - * pSvlan_cfg - SVLAN member configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_get(rtk_vlan_t svid, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - pSvlan_cfg->svid = svlanMemConf.vs_svid; - - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_member,&(pSvlan_cfg->memberport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_untag,&(pSvlan_cfg->untagport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - pSvlan_cfg->fiden = svlanMemConf.vs_force_fid; - pSvlan_cfg->fid = svlanMemConf.vs_fid_msti; - pSvlan_cfg->priority = svlanMemConf.vs_priority; - pSvlan_cfg->efiden = svlanMemConf.vs_efiden; - pSvlan_cfg->efid = svlanMemConf.vs_efid; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - -} - -/* Function Name: - * rtk_svlan_memberPortEntry_adv_set - * Description: - * Configure system SVLAN member by index - * Input: - * idx - Index (0 ~ 63) - * psvlan_cfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. - * Note: - * The API can set system 64 accepted s-tag frame format by index. - * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_adv_set(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_uint32 phyMbrPmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if (idx > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - if (pSvlan_cfg->svid>RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->memberport)); - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->untagport)); - - if (pSvlan_cfg->fiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if (pSvlan_cfg->priority > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if (pSvlan_cfg->efiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->efid > RTL8367C_EFIDMAX) - return RT_ERR_L2_FID; - - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = pSvlan_cfg->svid; - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_member = phyMbrPmask; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_untag = phyMbrPmask; - - - svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; - svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - - if(0 == svlanMemConf.vs_svid && - 0 == svlanMemConf.vs_member && - 0 == svlanMemConf.vs_untag && - 0 == svlanMemConf.vs_force_fid && - 0 == svlanMemConf.vs_fid_msti && - 0 == svlanMemConf.vs_priority && - 0 == svlanMemConf.vs_efiden && - 0 == svlanMemConf.vs_efid) - { - svlan_mbrCfgUsage[idx] = FALSE; - svlan_mbrCfgVid[idx] = 0; - } - else - { - svlan_mbrCfgUsage[idx] = TRUE; - svlan_mbrCfgVid[idx] = svlanMemConf.vs_svid; - } - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_memberPortEntry_adv_get - * Description: - * Get SVLAN member Configure by index. - * Input: - * idx - Index (0 ~ 63) - * Output: - * pSvlan_cfg - SVLAN member configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_adv_get(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if (idx > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - pSvlan_cfg->svid = svlanMemConf.vs_svid; - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_member,&(pSvlan_cfg->memberport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_untag,&(pSvlan_cfg->untagport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - pSvlan_cfg->fiden = svlanMemConf.vs_force_fid; - pSvlan_cfg->fid = svlanMemConf.vs_fid_msti; - pSvlan_cfg->priority = svlanMemConf.vs_priority; - pSvlan_cfg->efiden = svlanMemConf.vs_efiden; - pSvlan_cfg->efid = svlanMemConf.vs_efid; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_svlan_defaultSvlan_set - * Description: - * Configure default egress SVLAN. - * Input: - * port - Source port - * svid - SVLAN id - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * Note: - * The API can set port n S-tag format index while receiving frame from port n - * is transmit through uplink port with s-tag field - */ -rtk_api_ret_t rtk_svlan_defaultSvlan_set(rtk_port_t port, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - /* svid must be 0~4095 */ - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - if ((retVal = rtl8367c_setAsicSvlanDefaultVlan(rtk_switch_port_L2P_get(port), i)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; -} - -/* Function Name: - * rtk_svlan_defaultSvlan_get - * Description: - * Get the configure default egress SVLAN. - * Input: - * port - Source port - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get port n S-tag format index while receiving frame from port n - * is transmit through uplink port with s-tag field - */ -rtk_api_ret_t rtk_svlan_defaultSvlan_get(rtk_port_t port, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 idx; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanDefaultVlan(rtk_switch_port_L2P_get(port), &idx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_c2s_add - * Description: - * Configure SVLAN C2S table - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set system C2S configuration. ASIC will check upstream's VID and assign related - * SVID to mathed packet. There are 128 SVLAN C2S configurations. - */ -rtk_api_ret_t rtk_svlan_c2s_add(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx; - rtk_uint32 evid, pmsk, svidx, c2s_svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_port_t phyPort; - rtk_uint16 doneFlag; - - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(src_port); - - phyPort = rtk_switch_port_L2P_get(src_port); - - empty_idx = 0xFFFF; - svidx = 0xFFFF; - doneFlag = FALSE; - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_VID; - - for (i=RTL8367C_C2SIDXMAX; i>=0; i--) - { - if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &c2s_svidx)) != RT_ERR_OK) - return retVal; - - if (evid == vid) - { - /* Check Src_port */ - if(pmsk & (1 << phyPort)) - { - /* Check SVIDX */ - if(c2s_svidx == svidx) - { - /* All the same, do nothing */ - } - else - { - /* New svidx, remove src_port and find a new slot to add a new enrty */ - pmsk = pmsk & ~(1 << phyPort); - if(pmsk == 0) - c2s_svidx = 0; - - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, c2s_svidx)) != RT_ERR_OK) - return retVal; - } - } - else - { - if(c2s_svidx == svidx && doneFlag == FALSE) - { - pmsk = pmsk | (1 << phyPort); - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, svidx)) != RT_ERR_OK) - return retVal; - - doneFlag = TRUE; - } - } - } - else if (evid==0&&pmsk==0) - { - empty_idx = i; - } - } - - if (0xFFFF != empty_idx && doneFlag ==FALSE) - { - if ((retVal = rtl8367c_setAsicSvlanC2SConf(empty_idx, vid, (1< RTL8367C_EVIDMAX) - return RT_ERR_VLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(src_port); - phyPort = rtk_switch_port_L2P_get(src_port); - - for (i = 0; i <= RTL8367C_C2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &svidx)) != RT_ERR_OK) - return retVal; - - if (evid == vid) - { - if(pmsk & (1 << phyPort)) - { - pmsk = pmsk & ~(1 << phyPort); - if(pmsk == 0) - { - vid = 0; - svidx = 0; - } - - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, svidx)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_c2s_get - * Description: - * Get configure SVLAN C2S table - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * Output: - * pSvid - SVLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get system C2S configuration. There are 128 SVLAN C2S configurations. - */ -rtk_api_ret_t rtk_svlan_c2s_get(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 evid, pmsk, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_port_t phyPort; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(src_port); - phyPort = rtk_switch_port_L2P_get(src_port); - - for (i = 0; i <= RTL8367C_C2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &svidx)) != RT_ERR_OK) - return retVal; - - if (evid == vid) - { - if(pmsk & (1 << phyPort)) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_untag_action_set - * Description: - * Configure Action of downstream UnStag packet - * Input: - * action - Action for UnStag - * svid - The SVID assigned to UnStag packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of downstream Un-Stag packet. A SVID assigned - * to the un-stag is also supported by this API. The parameter of svid is - * only referenced when the action is set to UNTAG_ASSIGN - */ -rtk_api_ret_t rtk_svlan_untag_action_set(rtk_svlan_untag_action_t action, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (action >= UNTAG_END) - return RT_ERR_OUT_OF_RANGE; - - if(action == UNTAG_ASSIGN) - { - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - } - - if ((retVal = rtl8367c_setAsicSvlanIngressUntag((rtk_uint32)action)) != RT_ERR_OK) - return retVal; - - if(action == UNTAG_ASSIGN) - { - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - if ((retVal = rtl8367c_setAsicSvlanUntagVlan(i)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_untag_action_get - * Description: - * Get Action of downstream UnStag packet - * Input: - * None - * Output: - * pAction - Action for UnStag - * pSvid - The SVID assigned to UnStag packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can Get action of downstream Un-Stag packet. A SVID assigned - * to the un-stag is also retrieved by this API. The parameter pSvid is - * only refernced when the action is UNTAG_ASSIGN - */ -rtk_api_ret_t rtk_svlan_untag_action_get(rtk_svlan_untag_action_t *pAction, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction || NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanIngressUntag(pAction)) != RT_ERR_OK) - return retVal; - - if(*pAction == UNTAG_ASSIGN) - { - if ((retVal = rtl8367c_getAsicSvlanUntagVlan(&svidx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_unmatch_action_set - * Description: - * Configure Action of downstream Unmatch packet - * Input: - * action - Action for Unmatch - * svid - The SVID assigned to Unmatch packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of downstream Un-match packet. A SVID assigned - * to the un-match is also supported by this API. The parameter od svid is - * only refernced when the action is set to UNMATCH_ASSIGN - */ -rtk_api_ret_t rtk_svlan_unmatch_action_set(rtk_svlan_unmatch_action_t action, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (action >= UNMATCH_END) - return RT_ERR_OUT_OF_RANGE; - - if (action == UNMATCH_ASSIGN) - { - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - } - - if ((retVal = rtl8367c_setAsicSvlanIngressUnmatch((rtk_uint32)action)) != RT_ERR_OK) - return retVal; - - if(action == UNMATCH_ASSIGN) - { - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - if ((retVal = rtl8367c_setAsicSvlanUnmatchVlan(i)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_unmatch_action_get - * Description: - * Get Action of downstream Unmatch packet - * Input: - * None - * Output: - * pAction - Action for Unmatch - * pSvid - The SVID assigned to Unmatch packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can Get action of downstream Un-match packet. A SVID assigned - * to the un-match is also retrieved by this API. The parameter pSvid is - * only refernced when the action is UNMATCH_ASSIGN - */ -rtk_api_ret_t rtk_svlan_unmatch_action_get(rtk_svlan_unmatch_action_t *pAction, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction || NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanIngressUnmatch(pAction)) != RT_ERR_OK) - return retVal; - - if(*pAction == UNMATCH_ASSIGN) - { - if ((retVal = rtl8367c_getAsicSvlanUnmatchVlan(&svidx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_unassign_action_set - * Description: - * Configure Action of upstream without svid assign action - * Input: - * action - Action for Un-assign - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of upstream Un-assign svid packet. If action is not - * trap to CPU, the port-based SVID sure be assign as system need - */ -rtk_api_ret_t rtk_svlan_unassign_action_set(rtk_svlan_unassign_action_t action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (action >= UNASSIGN_END) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicSvlanEgressUnassign((rtk_uint32)action); - - return retVal; -} - -/* Function Name: - * rtk_svlan_unassign_action_get - * Description: - * Get action of upstream without svid assignment - * Input: - * None - * Output: - * pAction - Action for Un-assign - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * Note: - * None - */ -rtk_api_ret_t rtk_svlan_unassign_action_get(rtk_svlan_unassign_action_t *pAction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicSvlanEgressUnassign(pAction); - - return retVal; -} - -/* Function Name: - * rtk_svlan_dmac_vidsel_set - * Description: - * Set DMAC CVID selection - * Input: - * port - Port - * enable - state of DMAC CVID Selection - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set DMAC CVID Selection state - */ -rtk_api_ret_t rtk_svlan_dmac_vidsel_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicSvlanDmacCvidSel(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_dmac_vidsel_get - * Description: - * Get DMAC CVID selection - * Input: - * port - Port - * Output: - * pEnable - state of DMAC CVID Selection - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get DMAC CVID Selection state - */ -rtk_api_ret_t rtk_svlan_dmac_vidsel_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanDmacCvidSel(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_ipmc2s_add - * Description: - * add ip multicast address to SVLAN - * Input: - * svid - SVLAN VID - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set IP mutlicast to SVID configuration. If upstream packet is IPv4 multicast - * packet and DIP is matched MC2S configuration, ASIC will assign egress SVID to the packet. - * There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_ipmc2s_add(ipaddr_t ipmc, ipaddr_t ipmcMsk,rtk_vlan_t svid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx; - rtk_uint32 svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - if ((ipmc&0xF0000000)!=0xE0000000) - return RT_ERR_INPUT; - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - - empty_idx = 0xFFFF; - - for (i = RTL8367C_MC2SIDXMAX; i >= 0; i--) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && - svlanMC2SConf.sdata==ipmc&& - svlanMC2SConf.smask==ipmcMsk) - { - svlanMC2SConf.svidx = svidx; - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - } - } - else - { - empty_idx = i; - } - } - - if (empty_idx!=0xFFFF) - { - svlanMC2SConf.valid = TRUE; - svlanMC2SConf.svidx = svidx; - svlanMC2SConf.format = SVLAN_MC2S_MODE_IP; - svlanMC2SConf.sdata = ipmc; - svlanMC2SConf.smask = ipmcMsk; - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(empty_idx, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; - -} - -/* Function Name: - * rtk_svlan_ipmc2s_del - * Description: - * delete ip multicast address to SVLAN - * Input: - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_ipmc2s_del(ipaddr_t ipmc, ipaddr_t ipmcMsk) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((ipmc&0xF0000000)!=0xE0000000) - return RT_ERR_INPUT; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && - svlanMC2SConf.sdata==ipmc&& - svlanMC2SConf.smask==ipmcMsk) - { - memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_ipmc2s_get - * Description: - * Get ip multicast address to SVLAN - * Input: - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_ipmc2s_get(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if ((ipmc&0xF0000000)!=0xE0000000) - return RT_ERR_INPUT; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid && - svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && - svlanMC2SConf.sdata == ipmc && - svlanMC2SConf.smask == ipmcMsk) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svlanMC2SConf.svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - *pSvid = svlanMemConf.vs_svid; - return RT_ERR_OK; - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_l2mc2s_add - * Description: - * Add L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set L2 Mutlicast to SVID configuration. If upstream packet is L2 multicast - * packet and DMAC is matched, ASIC will assign egress SVID to the packet. There are 32 - * SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_l2mc2s_add(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx; - rtk_uint32 svidx, l2add, l2Mask; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - if (mac.octet[0]!= 1&&mac.octet[1]!=0) - return RT_ERR_INPUT; - - l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; - l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - empty_idx = 0xFFFF; - - for (i = RTL8367C_MC2SIDXMAX; i >=0; i--) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && - svlanMC2SConf.sdata==l2add&& - svlanMC2SConf.smask==l2Mask) - { - svlanMC2SConf.svidx = svidx; - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - } - } - else - { - empty_idx = i; - } - } - - if (empty_idx!=0xFFFF) - { - svlanMC2SConf.valid = TRUE; - svlanMC2SConf.svidx = svidx; - svlanMC2SConf.format = SVLAN_MC2S_MODE_MAC; - svlanMC2SConf.sdata = l2add; - svlanMC2SConf.smask = l2Mask; - - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(empty_idx, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_l2mc2s_del - * Description: - * delete L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete Mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_l2mc2s_del(rtk_mac_t mac, rtk_mac_t macMsk) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 l2add, l2Mask; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (mac.octet[0]!= 1&&mac.octet[1]!=0) - return RT_ERR_INPUT; - - l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; - l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && - svlanMC2SConf.sdata==l2add&& - svlanMC2SConf.smask==l2Mask) - { - memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_l2mc2s_get - * Description: - * Get L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get L2 mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_l2mc2s_get(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 l2add,l2Mask; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if (mac.octet[0]!= 1&&mac.octet[1]!=0) - return RT_ERR_INPUT; - - l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; - l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && - svlanMC2SConf.sdata==l2add&& - svlanMC2SConf.smask==l2Mask) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svlanMC2SConf.svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - *pSvid = svlanMemConf.vs_svid; - - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_sp2c_add - * Description: - * Add system SP2C configuration - * Input: - * cvid - VLAN ID - * dst_port - Destination port of SVLAN to CVLAN configuration - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can add SVID & Destination Port to CVLAN configuration. The downstream frames with assigned - * SVID will be add C-tag with assigned CVID if the output port is the assigned destination port. - * There are 128 SP2C configurations. - */ -rtk_api_ret_t rtk_svlan_sp2c_add(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t cvid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - rtk_port_t port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - if (cvid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(dst_port); - port = rtk_switch_port_L2P_get(dst_port); - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - empty_idx = 0xFFFF; - - for (i=RTL8367C_SP2CMAX; i >=0 ; i--) - { - if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - - if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == port) && (svlanSP2CConf.valid == 1)) - { - empty_idx = i; - break; - } - else if (svlanSP2CConf.valid == 0) - { - empty_idx = i; - } - } - - if (empty_idx!=0xFFFF) - { - svlanSP2CConf.valid = 1; - svlanSP2CConf.vid = cvid; - svlanSP2CConf.svidx = svidx; - svlanSP2CConf.dstport = port; - - if ((retVal = rtl8367c_setAsicSvlanSP2CConf(empty_idx, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; - -} - -/* Function Name: - * rtk_svlan_sp2c_get - * Description: - * Get configure system SP2C content - * Input: - * svid - SVLAN VID - * dst_port - Destination port of SVLAN to CVLAN configuration - * Output: - * pCvid - VLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * Note: - * The API can get SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. - */ -rtk_api_ret_t rtk_svlan_sp2c_get(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t *pCvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pCvid) - return RT_ERR_NULL_POINTER; - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(dst_port); - dst_port = rtk_switch_port_L2P_get(dst_port); - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - for (i = 0; i <= RTL8367C_SP2CMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - - if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == dst_port) && (svlanSP2CConf.valid == 1) ) - { - *pCvid = svlanSP2CConf.vid; - return RT_ERR_OK; - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_sp2c_del - * Description: - * Delete system SP2C configuration - * Input: - * svid - SVLAN VID - * dst_port - Destination port of SVLAN to CVLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. - */ -rtk_api_ret_t rtk_svlan_sp2c_del(rtk_vlan_t svid, rtk_port_t dst_port) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(dst_port); - dst_port = rtk_switch_port_L2P_get(dst_port); - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - for (i = 0; i <= RTL8367C_SP2CMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - - if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == dst_port) && (svlanSP2CConf.valid == 1) ) - { - svlanSP2CConf.valid = 0; - svlanSP2CConf.vid = 0; - svlanSP2CConf.svidx = 0; - svlanSP2CConf.dstport = 0; - - if ((retVal = rtl8367c_setAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_lookupType_set - * Description: - * Set lookup type of SVLAN - * Input: - * type - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * none - */ -rtk_api_ret_t rtk_svlan_lookupType_set(rtk_svlan_lookupType_t type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= SVLAN_LOOKUP_END) - return RT_ERR_CHIP_NOT_SUPPORTED; - - - svlan_lookupType = type; - - retVal = rtl8367c_setAsicSvlanLookupType((rtk_uint32)type); - - return retVal; -} - -/* Function Name: - * rtk_svlan_lookupType_get - * Description: - * Get lookup type of SVLAN - * Input: - * pType - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * none - */ -rtk_api_ret_t rtk_svlan_lookupType_get(rtk_svlan_lookupType_t *pType) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pType) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicSvlanLookupType(pType); - - svlan_lookupType = *pType; - - return retVal; -} - -/* Function Name: - * rtk_svlan_trapPri_set - * Description: - * Set svlan trap priority - * Input: - * priority - priority for trap packets - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_INT_PRIORITY - * Note: - * None - */ -rtk_api_ret_t rtk_svlan_trapPri_set(rtk_pri_t priority) -{ - rtk_api_ret_t retVal; - - RTK_CHK_INIT_STATE(); - - if(priority > RTL8367C_PRIMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicSvlanTrapPriority(priority); - - return retVal; -} /* end of rtk_svlan_trapPri_set */ - -/* Function Name: - * rtk_svlan_trapPri_get - * Description: - * Get svlan trap priority - * Input: - * None - * Output: - * pPriority - priority for trap packets - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -rtk_api_ret_t rtk_svlan_trapPri_get(rtk_pri_t *pPriority) -{ - rtk_api_ret_t retVal; - - RTK_CHK_INIT_STATE(); - - if(NULL == pPriority) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicSvlanTrapPriority(pPriority); - - return retVal; -} /* end of rtk_svlan_trapPri_get */ - - -/* Function Name: - * rtk_svlan_checkAndCreateMbr - * Description: - * Check and create Member configuration and return index - * Input: - * vid - VLAN id. - * Output: - * pIndex - Member configuration index - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VLAN ID. - * RT_ERR_TBL_FULL - Member Configuration table full - * Note: - * - */ -rtk_api_ret_t rtk_svlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex) -{ - rtk_api_ret_t retVal; - rtk_uint32 svidx; - rtk_uint32 empty_idx = 0xFFFF; - rtl8367c_svlan_memconf_t svlan_cfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~4095 */ - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Null pointer check */ - if(NULL == pIndex) - return RT_ERR_NULL_POINTER; - - /* Search exist entry */ - for (svidx = 0; svidx <= RTL8367C_SVIDXMAX; svidx++) - { - if(svlan_mbrCfgUsage[svidx] == TRUE) - { - if(svlan_mbrCfgVid[svidx] == vid) - { - /* Found! return index */ - *pIndex = svidx; - return RT_ERR_OK; - } - } - else if(empty_idx == 0xFFFF) - { - empty_idx = svidx; - } - - } - - if(empty_idx == 0xFFFF) - { - /* No empty index */ - return RT_ERR_TBL_FULL; - } - - svlan_mbrCfgUsage[empty_idx] = TRUE; - svlan_mbrCfgVid[empty_idx] = vid; - - memset(&svlan_cfg, 0, sizeof(rtl8367c_svlan_memconf_t)); - - svlan_cfg.vs_svid = vid; - /*for create check*/ - if(vid == 0) - { - svlan_cfg.vs_efid = 1; - } - - if((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlan_cfg)) != RT_ERR_OK) - return retVal; - - *pIndex = empty_idx; - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/trap.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/trap.c deleted file mode 100644 index af9661058b..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/trap.c +++ /dev/null @@ -1,1229 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Trap module. - * - */ - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Function Name: - * rtk_trap_unknownUnicastPktAction_set - * Description: - * Set unknown unicast packet action configuration. - * Input: - * port - ingress port ID for unknown unicast packet - * ucast_action - Unknown unicast action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - * - UCAST_ACTION_FLOODING - */ -rtk_api_ret_t rtk_trap_unknownUnicastPktAction_set(rtk_port_t port, rtk_trap_ucast_action_t ucast_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if (ucast_action >= UCAST_ACTION_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortUnknownDaBehavior(rtk_switch_port_L2P_get(port), ucast_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unknownUnicastPktAction_get - * Description: - * Get unknown unicast packet action configuration. - * Input: - * port - ingress port ID for unknown unicast packet - * Output: - * pUcast_action - Unknown unicast action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * This API can get unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - * - UCAST_ACTION_FLOODING - */ -rtk_api_ret_t rtk_trap_unknownUnicastPktAction_get(rtk_port_t port, rtk_trap_ucast_action_t *pUcast_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if (NULL == pUcast_action) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortUnknownDaBehavior(rtk_switch_port_L2P_get(port), pUcast_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unknownMacPktAction_set - * Description: - * Set unknown source MAC packet action configuration. - * Input: - * ucast_action - Unknown source MAC action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - */ -rtk_api_ret_t rtk_trap_unknownMacPktAction_set(rtk_trap_ucast_action_t ucast_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (ucast_action >= UCAST_ACTION_FLOODING) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortUnknownSaBehavior(ucast_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unknownMacPktAction_get - * Description: - * Get unknown source MAC packet action configuration. - * Input: - * None. - * Output: - * pUcast_action - Unknown source MAC action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null Pointer. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - */ -rtk_api_ret_t rtk_trap_unknownMacPktAction_get(rtk_trap_ucast_action_t *pUcast_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pUcast_action) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortUnknownSaBehavior(pUcast_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unmatchMacPktAction_set - * Description: - * Set unmatch source MAC packet action configuration. - * Input: - * ucast_action - Unknown source MAC action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - */ -rtk_api_ret_t rtk_trap_unmatchMacPktAction_set(rtk_trap_ucast_action_t ucast_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (ucast_action >= UCAST_ACTION_FLOODING) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortUnmatchedSaBehavior(ucast_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unmatchMacPktAction_get - * Description: - * Get unmatch source MAC packet action configuration. - * Input: - * None. - * Output: - * pUcast_action - Unknown source MAC action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set unknown unicast packet action configuration. - * The unknown unicast action is as following: - * - UCAST_ACTION_FORWARD_PMASK - * - UCAST_ACTION_DROP - * - UCAST_ACTION_TRAP2CPU - */ -rtk_api_ret_t rtk_trap_unmatchMacPktAction_get(rtk_trap_ucast_action_t *pUcast_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pUcast_action) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortUnmatchedSaBehavior(pUcast_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unmatchMacMoving_set - * Description: - * Set unmatch source MAC packet moving state. - * Input: - * port - Port ID. - * enable - ENABLED: allow SA moving, DISABLE: don't allow SA moving. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - */ -rtk_api_ret_t rtk_trap_unmatchMacMoving_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if(enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicPortUnmatchedSaMoving(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unmatchMacMoving_get - * Description: - * Set unmatch source MAC packet moving state. - * Input: - * port - Port ID. - * Output: - * pEnable - ENABLED: allow SA moving, DISABLE: don't allow SA moving. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - */ -rtk_api_ret_t rtk_trap_unmatchMacMoving_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortUnmatchedSaMoving(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unknownMcastPktAction_set - * Description: - * Set behavior of unknown multicast - * Input: - * port - Port id. - * type - unknown multicast packet type. - * mcast_action - unknown multicast action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * When receives an unknown multicast packet, switch may trap, drop or flood this packet - * (1) The unknown multicast packet type is as following: - * - MCAST_L2 - * - MCAST_IPV4 - * - MCAST_IPV6 - * (2) The unknown multicast action is as following: - * - MCAST_ACTION_FORWARD - * - MCAST_ACTION_DROP - * - MCAST_ACTION_TRAP2CPU - */ -rtk_api_ret_t rtk_trap_unknownMcastPktAction_set(rtk_port_t port, rtk_mcast_type_t type, rtk_trap_mcast_action_t mcast_action) -{ - rtk_api_ret_t retVal; - rtk_uint32 rawAction; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (type >= MCAST_END) - return RT_ERR_INPUT; - - if (mcast_action >= MCAST_ACTION_END) - return RT_ERR_INPUT; - - - switch (type) - { - case MCAST_L2: - if (MCAST_ACTION_ROUTER_PORT == mcast_action) - return RT_ERR_INPUT; - else if(MCAST_ACTION_DROP_EX_RMA == mcast_action) - rawAction = L2_UNKOWN_MULTICAST_DROP_EXCLUDE_RMA; - else - rawAction = (rtk_uint32)mcast_action; - - if ((retVal = rtl8367c_setAsicUnknownL2MulticastBehavior(rtk_switch_port_L2P_get(port), rawAction)) != RT_ERR_OK) - return retVal; - - break; - case MCAST_IPV4: - if (MCAST_ACTION_DROP_EX_RMA == mcast_action) - return RT_ERR_INPUT; - else - rawAction = (rtk_uint32)mcast_action; - - if ((retVal = rtl8367c_setAsicUnknownIPv4MulticastBehavior(rtk_switch_port_L2P_get(port), rawAction)) != RT_ERR_OK) - return retVal; - - break; - case MCAST_IPV6: - if (MCAST_ACTION_DROP_EX_RMA == mcast_action) - return RT_ERR_INPUT; - else - rawAction = (rtk_uint32)mcast_action; - - if ((retVal = rtl8367c_setAsicUnknownIPv6MulticastBehavior(rtk_switch_port_L2P_get(port), rawAction)) != RT_ERR_OK) - return retVal; - - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_unknownMcastPktAction_get - * Description: - * Get behavior of unknown multicast - * Input: - * type - unknown multicast packet type. - * Output: - * pMcast_action - unknown multicast action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_NOT_ALLOWED - Invalid operation. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * When receives an unknown multicast packet, switch may trap, drop or flood this packet - * (1) The unknown multicast packet type is as following: - * - MCAST_L2 - * - MCAST_IPV4 - * - MCAST_IPV6 - * (2) The unknown multicast action is as following: - * - MCAST_ACTION_FORWARD - * - MCAST_ACTION_DROP - * - MCAST_ACTION_TRAP2CPU - */ -rtk_api_ret_t rtk_trap_unknownMcastPktAction_get(rtk_port_t port, rtk_mcast_type_t type, rtk_trap_mcast_action_t *pMcast_action) -{ - rtk_api_ret_t retVal; - rtk_uint32 rawAction; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (type >= MCAST_END) - return RT_ERR_INPUT; - - if(NULL == pMcast_action) - return RT_ERR_NULL_POINTER; - - switch (type) - { - case MCAST_L2: - if ((retVal = rtl8367c_getAsicUnknownL2MulticastBehavior(rtk_switch_port_L2P_get(port), &rawAction)) != RT_ERR_OK) - return retVal; - - if(L2_UNKOWN_MULTICAST_DROP_EXCLUDE_RMA == rawAction) - *pMcast_action = MCAST_ACTION_DROP_EX_RMA; - else - *pMcast_action = (rtk_trap_mcast_action_t)rawAction; - - break; - case MCAST_IPV4: - if ((retVal = rtl8367c_getAsicUnknownIPv4MulticastBehavior(rtk_switch_port_L2P_get(port), &rawAction)) != RT_ERR_OK) - return retVal; - - *pMcast_action = (rtk_trap_mcast_action_t)rawAction; - break; - case MCAST_IPV6: - if ((retVal = rtl8367c_getAsicUnknownIPv6MulticastBehavior(rtk_switch_port_L2P_get(port), &rawAction)) != RT_ERR_OK) - return retVal; - - *pMcast_action = (rtk_trap_mcast_action_t)rawAction; - break; - default: - break; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_lldpEnable_set - * Description: - * Set LLDP enable. - * Input: - * enabled - LLDP enable, 0: follow RMA, 1: use LLDP action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NOT_ALLOWED - Invalid action. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - DMAC Assignment - * - 01:80:c2:00:00:0e ethertype = 0x88CC LLDP - * - 01:80:c2:00:00:03 ethertype = 0x88CC - * - 01:80:c2:00:00:00 ethertype = 0x88CC - - */ -rtk_api_ret_t rtk_trap_lldpEnable_set(rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_enable_t tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enabled >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicRmaLldp(enabled, &rmacfg)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_lldpEnable_get - * Description: - * Get LLDP status. - * Input: - * None - * Output: - * pEnabled - LLDP enable, 0: follow RMA, 1: use LLDP action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * LLDP is as following definition. - * - DMAC Assignment - * - 01:80:c2:00:00:0e ethertype = 0x88CC LLDP - * - 01:80:c2:00:00:03 ethertype = 0x88CC - * - 01:80:c2:00:00:00 ethertype = 0x88CC - */ -rtk_api_ret_t rtk_trap_lldpEnable_get(rtk_enable_t *pEnabled) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicRmaLldp(pEnabled, &rmacfg)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_reasonTrapToCpuPriority_set - * Description: - * Set priority value of a packet that trapped to CPU port according to specific reason. - * Input: - * type - reason that trap to CPU port. - * priority - internal priority that is going to be set for specific trap reason. - * Output: - * None. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - Invalid input parameter - * Note: - * Currently the trap reason that supported are listed as follows: - * - TRAP_REASON_RMA - * - TRAP_REASON_OAM - * - TRAP_REASON_1XUNAUTH - * - TRAP_REASON_VLANSTACK - * - TRAP_REASON_UNKNOWNMC - */ -rtk_api_ret_t rtk_trap_reasonTrapToCpuPriority_set(rtk_trap_reason_type_t type, rtk_pri_t priority) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= TRAP_REASON_END) - return RT_ERR_INPUT; - - if (priority > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - switch (type) - { - case TRAP_REASON_RMA: - if ((retVal = rtl8367c_getAsicRma(0, &rmacfg)) != RT_ERR_OK) - return retVal; - rmacfg.trap_priority= priority; - if ((retVal = rtl8367c_setAsicRma(0, &rmacfg)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_OAM: - if ((retVal = rtl8367c_setAsicOamCpuPri(priority)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_1XUNAUTH: - if ((retVal = rtl8367c_setAsic1xTrapPriority(priority)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_VLANSTACK: - if ((retVal = rtl8367c_setAsicSvlanTrapPriority(priority)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_UNKNOWNMC: - if ((retVal = rtl8367c_setAsicUnknownMulticastTrapPriority(priority)) != RT_ERR_OK) - return retVal; - - break; - default: - return RT_ERR_CHIP_NOT_SUPPORTED; - } - - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_trap_reasonTrapToCpuPriority_get - * Description: - * Get priority value of a packet that trapped to CPU port according to specific reason. - * Input: - * type - reason that trap to CPU port. - * Output: - * pPriority - configured internal priority for such reason. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NOT_INIT - The module is not initial - * RT_ERR_INPUT - Invalid input parameter - * RT_ERR_NULL_POINTER - NULL pointer - * Note: - * Currently the trap reason that supported are listed as follows: - * - TRAP_REASON_RMA - * - TRAP_REASON_OAM - * - TRAP_REASON_1XUNAUTH - * - TRAP_REASON_VLANSTACK - * - TRAP_REASON_UNKNOWNMC - */ -rtk_api_ret_t rtk_trap_reasonTrapToCpuPriority_get(rtk_trap_reason_type_t type, rtk_pri_t *pPriority) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= TRAP_REASON_END) - return RT_ERR_INPUT; - - if(NULL == pPriority) - return RT_ERR_NULL_POINTER; - - switch (type) - { - case TRAP_REASON_RMA: - if ((retVal = rtl8367c_getAsicRma(0, &rmacfg)) != RT_ERR_OK) - return retVal; - *pPriority = rmacfg.trap_priority; - - break; - case TRAP_REASON_OAM: - if ((retVal = rtl8367c_getAsicOamCpuPri(pPriority)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_1XUNAUTH: - if ((retVal = rtl8367c_getAsic1xTrapPriority(pPriority)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_VLANSTACK: - if ((retVal = rtl8367c_getAsicSvlanTrapPriority(pPriority)) != RT_ERR_OK) - return retVal; - - break; - case TRAP_REASON_UNKNOWNMC: - if ((retVal = rtl8367c_getAsicUnknownMulticastTrapPriority(pPriority)) != RT_ERR_OK) - return retVal; - - break; - default: - return RT_ERR_CHIP_NOT_SUPPORTED; - - } - - return RT_ERR_OK; -} - - - -/* Function Name: - * rtk_trap_rmaAction_set - * Description: - * Set Reserved multicast address action configuration. - * Input: - * type - rma type. - * rma_action - RMA action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * - * There are 48 types of Reserved Multicast Address frame for application usage. - * (1)They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - * (2) The RMA action is as following: - * - RMA_ACTION_FORWARD - * - RMA_ACTION_TRAP2CPU - * - RMA_ACTION_DROP - * - RMA_ACTION_FORWARD_EXCLUDE_CPU - */ -rtk_api_ret_t rtk_trap_rmaAction_set(rtk_trap_type_t type, rtk_trap_rma_action_t rma_action) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= TRAP_END) - return RT_ERR_INPUT; - - if (rma_action >= RMA_ACTION_END) - return RT_ERR_RMA_ACTION; - - if (type >= 0 && type <= TRAP_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.operation = rma_action; - - if ((retVal = rtl8367c_setAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == TRAP_CDP) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.operation = rma_action; - - if ((retVal = rtl8367c_setAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == TRAP_CSSTP) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.operation = rma_action; - - if ((retVal = rtl8367c_setAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == TRAP_LLDP) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.operation = rma_action; - - if ((retVal = rtl8367c_setAsicRmaLldp(tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_rmaAction_get - * Description: - * Get Reserved multicast address action configuration. - * Input: - * type - rma type. - * Output: - * pRma_action - RMA action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 48 types of Reserved Multicast Address frame for application usage. - * (1)They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - * (2) The RMA action is as following: - * - RMA_ACTION_FORWARD - * - RMA_ACTION_TRAP2CPU - * - RMA_ACTION_DROP - * - RMA_ACTION_FORWARD_EXCLUDE_CPU - */ -rtk_api_ret_t rtk_trap_rmaAction_get(rtk_trap_type_t type, rtk_trap_rma_action_t *pRma_action) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= TRAP_END) - return RT_ERR_INPUT; - - if(NULL == pRma_action) - return RT_ERR_NULL_POINTER; - - if (type >= 0 && type <= TRAP_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pRma_action = rmacfg.operation; - } - else if (type == TRAP_CDP) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pRma_action = rmacfg.operation; - } - else if (type == TRAP_CSSTP) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pRma_action = rmacfg.operation; - } - else if (type == TRAP_LLDP) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp,&rmacfg)) != RT_ERR_OK) - return retVal; - - *pRma_action = rmacfg.operation; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_rmaKeepFormat_set - * Description: - * Set Reserved multicast address keep format configuration. - * Input: - * type - rma type. - * enable - enable keep format. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_ENABLE - Invalid IFG parameter - * Note: - * - * There are 48 types of Reserved Multicast Address frame for application usage. - * They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - */ -rtk_api_ret_t rtk_trap_rmaKeepFormat_set(rtk_trap_type_t type, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= TRAP_END) - return RT_ERR_INPUT; - - if (enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if (type >= 0 && type <= TRAP_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.keep_format = enable; - - if ((retVal = rtl8367c_setAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == TRAP_CDP) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.keep_format = enable; - - if ((retVal = rtl8367c_setAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == TRAP_CSSTP) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.keep_format = enable; - - if ((retVal = rtl8367c_setAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - } - else if (type == TRAP_LLDP) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - - rmacfg.keep_format = enable; - - if ((retVal = rtl8367c_setAsicRmaLldp(tmp, &rmacfg)) != RT_ERR_OK) - return retVal; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trap_rmaKeepFormat_get - * Description: - * Get Reserved multicast address action configuration. - * Input: - * type - rma type. - * Output: - * pEnable - keep format status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 48 types of Reserved Multicast Address frame for application usage. - * They are as following definition. - * - TRAP_BRG_GROUP, - * - TRAP_FD_PAUSE, - * - TRAP_SP_MCAST, - * - TRAP_1X_PAE, - * - TRAP_UNDEF_BRG_04, - * - TRAP_UNDEF_BRG_05, - * - TRAP_UNDEF_BRG_06, - * - TRAP_UNDEF_BRG_07, - * - TRAP_PROVIDER_BRIDGE_GROUP_ADDRESS, - * - TRAP_UNDEF_BRG_09, - * - TRAP_UNDEF_BRG_0A, - * - TRAP_UNDEF_BRG_0B, - * - TRAP_UNDEF_BRG_0C, - * - TRAP_PROVIDER_BRIDGE_GVRP_ADDRESS, - * - TRAP_8021AB, - * - TRAP_UNDEF_BRG_0F, - * - TRAP_BRG_MNGEMENT, - * - TRAP_UNDEFINED_11, - * - TRAP_UNDEFINED_12, - * - TRAP_UNDEFINED_13, - * - TRAP_UNDEFINED_14, - * - TRAP_UNDEFINED_15, - * - TRAP_UNDEFINED_16, - * - TRAP_UNDEFINED_17, - * - TRAP_UNDEFINED_18, - * - TRAP_UNDEFINED_19, - * - TRAP_UNDEFINED_1A, - * - TRAP_UNDEFINED_1B, - * - TRAP_UNDEFINED_1C, - * - TRAP_UNDEFINED_1D, - * - TRAP_UNDEFINED_1E, - * - TRAP_UNDEFINED_1F, - * - TRAP_GMRP, - * - TRAP_GVRP, - * - TRAP_UNDEF_GARP_22, - * - TRAP_UNDEF_GARP_23, - * - TRAP_UNDEF_GARP_24, - * - TRAP_UNDEF_GARP_25, - * - TRAP_UNDEF_GARP_26, - * - TRAP_UNDEF_GARP_27, - * - TRAP_UNDEF_GARP_28, - * - TRAP_UNDEF_GARP_29, - * - TRAP_UNDEF_GARP_2A, - * - TRAP_UNDEF_GARP_2B, - * - TRAP_UNDEF_GARP_2C, - * - TRAP_UNDEF_GARP_2D, - * - TRAP_UNDEF_GARP_2E, - * - TRAP_UNDEF_GARP_2F, - * - TRAP_CDP. - * - TRAP_CSSTP. - * - TRAP_LLDP. - */ -rtk_api_ret_t rtk_trap_rmaKeepFormat_get(rtk_trap_type_t type, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - rtk_uint32 tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= TRAP_END) - return RT_ERR_INPUT; - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if (type >= 0 && type <= TRAP_UNDEF_GARP_2F) - { - if ((retVal = rtl8367c_getAsicRma(type, &rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.keep_format; - } - else if (type == TRAP_CDP) - { - if ((retVal = rtl8367c_getAsicRmaCdp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.keep_format; - } - else if (type == TRAP_CSSTP) - { - if ((retVal = rtl8367c_getAsicRmaCsstp(&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.keep_format; - } - else if (type == TRAP_LLDP) - { - if ((retVal = rtl8367c_getAsicRmaLldp(&tmp,&rmacfg)) != RT_ERR_OK) - return retVal; - - *pEnable = rmacfg.keep_format; - } - else - return RT_ERR_INPUT; - - return RT_ERR_OK; -} - - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/trunk.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/trunk.c deleted file mode 100644 index 8a88dc5ff0..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/trunk.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in Trunk module. - * - */ - -#include -#include -#include -#include - -#include -#include - -/* Function Name: - * rtk_trunk_port_set - * Description: - * Set trunking group available port mask - * Input: - * trk_gid - trunk group id - * pTrunk_member_portmask - Logic trunking member port mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * The API can set port trunking group port mask. Each port trunking group has max 4 ports. - * If enabled port mask has less than 2 ports available setting, then this trunking group function is disabled. - */ -rtk_api_ret_t rtk_trunk_port_set(rtk_trunk_group_t trk_gid, rtk_portmask_t *pTrunk_member_portmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - rtk_uint32 regValue, type, tmp; - - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0249)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_getAsicReg(0x1300, ®Value)) != RT_ERR_OK) - return retVal; - - if((retVal = rtl8367c_setAsicReg(0x13C2, 0x0000)) != RT_ERR_OK) - return retVal; - - switch (regValue) - { - case 0x0276: - case 0x0597: - case 0x6367: - type = 0; - break; - case 0x0652: - case 0x6368: - type = 1; - break; - case 0x0801: - case 0x6511: - type = 2; - break; - default: - return RT_ERR_FAILED; - } - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Trunk Group Valid */ - RTK_CHK_TRUNK_GROUP_VALID(trk_gid); - - if(NULL == pTrunk_member_portmask) - return RT_ERR_NULL_POINTER; - - RTK_CHK_PORTMASK_VALID(pTrunk_member_portmask); - - if((retVal = rtk_switch_portmask_L2P_get(pTrunk_member_portmask, &pmsk)) != RT_ERR_OK) - return retVal; - - if((type == 0) || (type == 1)) - { - if ((pmsk | RTL8367C_PORT_TRUNK_GROUP_MASK_MASK(trk_gid)) != (rtk_uint32)RTL8367C_PORT_TRUNK_GROUP_MASK_MASK(trk_gid)) - return RT_ERR_PORT_MASK; - - pmsk = (pmsk & RTL8367C_PORT_TRUNK_GROUP_MASK_MASK(trk_gid)) >> RTL8367C_PORT_TRUNK_GROUP_MASK_OFFSET(trk_gid); - } - else if(type == 2) - { - tmp = 0; - - if(pmsk & 0x2) - tmp |= 1; - if(pmsk & 0x8) - tmp |=2; - if(pmsk & 0x80) - tmp |=8; - - pmsk = tmp; - } - - if ((retVal = rtl8367c_setAsicTrunkingGroup(trk_gid, pmsk)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_port_get - * Description: - * Get trunking group available port mask - * Input: - * trk_gid - trunk group id - * Output: - * pTrunk_member_portmask - Logic trunking member port mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * Note: - * The API can get 2 port trunking group. - */ -rtk_api_ret_t rtk_trunk_port_get(rtk_trunk_group_t trk_gid, rtk_portmask_t *pTrunk_member_portmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Trunk Group Valid */ - RTK_CHK_TRUNK_GROUP_VALID(trk_gid); - - if ((retVal = rtl8367c_getAsicTrunkingGroup(trk_gid, &pmsk)) != RT_ERR_OK) - return retVal; - - pmsk = pmsk << RTL8367C_PORT_TRUNK_GROUP_MASK_OFFSET(trk_gid); - - if((retVal = rtk_switch_portmask_P2L_get(pmsk, pTrunk_member_portmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_distributionAlgorithm_set - * Description: - * Set port trunking hash select sources - * Input: - * trk_gid - trunk group id - * algo_bitmask - Bitmask of the distribution algorithm - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * RT_ERR_LA_HASHMASK - Hash algorithm selection error. - * RT_ERR_PORT_MASK - Invalid portmask. - * Note: - * The API can set port trunking hash algorithm sources. - * 7 bits mask for link aggregation group0 hash parameter selection {DIP, SIP, DMAC, SMAC, SPA} - * - 0b0000001: SPA - * - 0b0000010: SMAC - * - 0b0000100: DMAC - * - 0b0001000: SIP - * - 0b0010000: DIP - * - 0b0100000: TCP/UDP Source Port - * - 0b1000000: TCP/UDP Destination Port - * Example: - * - 0b0000011: SMAC & SPA - * - Note that it could be an arbitrary combination or independent set - */ -rtk_api_ret_t rtk_trunk_distributionAlgorithm_set(rtk_trunk_group_t trk_gid, rtk_uint32 algo_bitmask) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (trk_gid != RTK_WHOLE_SYSTEM) - return RT_ERR_LA_TRUNK_ID; - - if (algo_bitmask >= 128) - return RT_ERR_LA_HASHMASK; - - if ((retVal = rtl8367c_setAsicTrunkingHashSelect(algo_bitmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_distributionAlgorithm_get - * Description: - * Get port trunking hash select sources - * Input: - * trk_gid - trunk group id - * Output: - * pAlgo_bitmask - Bitmask of the distribution algorithm - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_LA_TRUNK_ID - Invalid trunking group - * Note: - * The API can get port trunking hash algorithm sources. - */ -rtk_api_ret_t rtk_trunk_distributionAlgorithm_get(rtk_trunk_group_t trk_gid, rtk_uint32 *pAlgo_bitmask) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (trk_gid != RTK_WHOLE_SYSTEM) - return RT_ERR_LA_TRUNK_ID; - - if(NULL == pAlgo_bitmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicTrunkingHashSelect((rtk_uint32 *)pAlgo_bitmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_trafficSeparate_set - * Description: - * Set the traffic separation setting of a trunk group from the specified device. - * Input: - * trk_gid - trunk group id - * separateType - traffic separation setting - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_LA_HASHMASK - invalid hash mask - * Note: - * SEPARATE_NONE: disable traffic separation - * SEPARATE_FLOOD: trunk MSB link up port is dedicated to TX flooding (L2 lookup miss) traffic - */ -rtk_api_ret_t rtk_trunk_trafficSeparate_set(rtk_trunk_group_t trk_gid, rtk_trunk_separateType_t separateType) -{ - rtk_api_ret_t retVal; - rtk_uint32 enabled; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (trk_gid != RTK_WHOLE_SYSTEM) - return RT_ERR_LA_TRUNK_ID; - - if(separateType >= SEPARATE_END) - return RT_ERR_INPUT; - - enabled = (separateType == SEPARATE_FLOOD) ? ENABLED : DISABLED; - if ((retVal = rtl8367c_setAsicTrunkingFlood(enabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_trafficSeparate_get - * Description: - * Get the traffic separation setting of a trunk group from the specified device. - * Input: - * trk_gid - trunk group id - * Output: - * pSeparateType - pointer separated traffic type - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * SEPARATE_NONE: disable traffic separation - * SEPARATE_FLOOD: trunk MSB link up port is dedicated to TX flooding (L2 lookup miss) traffic - */ -rtk_api_ret_t rtk_trunk_trafficSeparate_get(rtk_trunk_group_t trk_gid, rtk_trunk_separateType_t *pSeparateType) -{ - rtk_api_ret_t retVal; - rtk_uint32 enabled; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (trk_gid != RTK_WHOLE_SYSTEM) - return RT_ERR_LA_TRUNK_ID; - - if(NULL == pSeparateType) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicTrunkingFlood(&enabled)) != RT_ERR_OK) - return retVal; - - *pSeparateType = (enabled == ENABLED) ? SEPARATE_FLOOD : SEPARATE_NONE; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_mode_set - * Description: - * Set the trunk mode to the specified device. - * Input: - * mode - trunk mode - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_INPUT - invalid input parameter - * Note: - * The enum of the trunk mode as following - * - TRUNK_MODE_NORMAL - * - TRUNK_MODE_DUMB - */ -rtk_api_ret_t rtk_trunk_mode_set(rtk_trunk_mode_t mode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(mode >= TRUNK_MODE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicTrunkingMode((rtk_uint32)mode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_mode_get - * Description: - * Get the trunk mode from the specified device. - * Input: - * None - * Output: - * pMode - pointer buffer of trunk mode - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * The enum of the trunk mode as following - * - TRUNK_MODE_NORMAL - * - TRUNK_MODE_DUMB - */ -rtk_api_ret_t rtk_trunk_mode_get(rtk_trunk_mode_t *pMode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicTrunkingMode((rtk_uint32 *)pMode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_trafficPause_set - * Description: - * Set the traffic pause setting of a trunk group. - * Input: - * trk_gid - trunk group id - * enable - traffic pause state - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * Note: - * None. - */ -rtk_api_ret_t rtk_trunk_trafficPause_set(rtk_trunk_group_t trk_gid, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Trunk Group Valid */ - RTK_CHK_TRUNK_GROUP_VALID(trk_gid); - - if(enable >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicTrunkingFc((rtk_uint32)trk_gid, (rtk_uint32)enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_trafficPause_get - * Description: - * Get the traffic pause setting of a trunk group. - * Input: - * trk_gid - trunk group id - * Output: - * pEnable - pointer of traffic pause state. - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None. - */ -rtk_api_ret_t rtk_trunk_trafficPause_get(rtk_trunk_group_t trk_gid, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Trunk Group Valid */ - RTK_CHK_TRUNK_GROUP_VALID(trk_gid); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicTrunkingFc((rtk_uint32)trk_gid, (rtk_uint32 *)pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_hashMappingTable_set - * Description: - * Set hash value to port array in the trunk group id from the specified device. - * Input: - * trk_gid - trunk group id - * pHash2Port_array - ports associate with the hash value - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * RT_ERR_LA_TRUNK_NOT_EXIST - the trunk doesn't exist - * RT_ERR_LA_NOT_MEMBER_PORT - the port is not a member port of the trunk - * RT_ERR_LA_CPUPORT - CPU port can not be aggregated port - * Note: - * Trunk group 0 & 1 shares the same hash mapping table. - * Trunk group 2 uses a independent table. - */ -rtk_api_ret_t rtk_trunk_hashMappingTable_set(rtk_trunk_group_t trk_gid, rtk_trunk_hashVal2Port_t *pHash2Port_array) -{ - rtk_api_ret_t retVal; - rtk_uint32 hashValue; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Trunk Group Valid */ - RTK_CHK_TRUNK_GROUP_VALID(trk_gid); - - if(NULL == pHash2Port_array) - return RT_ERR_NULL_POINTER; - - if(trk_gid <= TRUNK_GROUP1) - { - for(hashValue = 0; hashValue < RTK_MAX_NUM_OF_TRUNK_HASH_VAL; hashValue++) - { - if ((retVal = rtl8367c_setAsicTrunkingHashTable(hashValue, pHash2Port_array->value[hashValue])) != RT_ERR_OK) - return retVal; - } - } - else - { - for(hashValue = 0; hashValue < RTK_MAX_NUM_OF_TRUNK_HASH_VAL; hashValue++) - { - if ((retVal = rtl8367c_setAsicTrunkingHashTable1(hashValue, pHash2Port_array->value[hashValue])) != RT_ERR_OK) - return retVal; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_hashMappingTable_get - * Description: - * Get hash value to port array in the trunk group id from the specified device. - * Input: - * trk_gid - trunk group id - * Output: - * pHash2Port_array - pointer buffer of ports associate with the hash value - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_UNIT_ID - invalid unit id - * RT_ERR_LA_TRUNK_ID - invalid trunk ID - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * Trunk group 0 & 1 shares the same hash mapping table. - * Trunk group 2 uses a independent table. - */ -rtk_api_ret_t rtk_trunk_hashMappingTable_get(rtk_trunk_group_t trk_gid, rtk_trunk_hashVal2Port_t *pHash2Port_array) -{ - rtk_api_ret_t retVal; - rtk_uint32 hashValue; - rtk_uint32 hashPort; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Trunk Group Valid */ - RTK_CHK_TRUNK_GROUP_VALID(trk_gid); - - if(NULL == pHash2Port_array) - return RT_ERR_NULL_POINTER; - - if(trk_gid <= TRUNK_GROUP1) - { - for(hashValue = 0; hashValue < RTK_MAX_NUM_OF_TRUNK_HASH_VAL; hashValue++) - { - if ((retVal = rtl8367c_getAsicTrunkingHashTable(hashValue, &hashPort)) != RT_ERR_OK) - return retVal; - - pHash2Port_array->value[hashValue] = hashPort; - } - } - else - { - for(hashValue = 0; hashValue < RTK_MAX_NUM_OF_TRUNK_HASH_VAL; hashValue++) - { - if ((retVal = rtl8367c_getAsicTrunkingHashTable1(hashValue, &hashPort)) != RT_ERR_OK) - return retVal; - - pHash2Port_array->value[hashValue] = hashPort; - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_trunk_portQueueEmpty_get - * Description: - * Get the port mask which all queues are empty. - * Input: - * None. - * Output: - * pEmpty_portmask - pointer empty port mask - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None. - */ -rtk_api_ret_t rtk_trunk_portQueueEmpty_get(rtk_portmask_t *pEmpty_portmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEmpty_portmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicQeueuEmptyStatus(&pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtk_switch_portmask_P2L_get(pmask, pEmpty_portmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/vlan.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/vlan.c deleted file mode 100644 index f7480c4906..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/vlan.c +++ /dev/null @@ -1,2124 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in VLAN module. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -typedef enum vlan_mbrCfgType_e -{ - MBRCFG_UNUSED = 0, - MBRCFG_USED_BY_VLAN, - MBRCFG_END -}vlan_mbrCfgType_t; - -static rtk_vlan_t vlan_mbrCfgVid[RTL8367C_CVIDXNO]; -static vlan_mbrCfgType_t vlan_mbrCfgUsage[RTL8367C_CVIDXNO]; - -/* Function Name: - * rtk_vlan_init - * Description: - * Initialize VLAN. - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * VLAN is disabled by default. User has to call this API to enable VLAN before - * using it. And It will set a default VLAN(vid 1) including all ports and set - * all ports PVID to the default VLAN. - */ -rtk_api_ret_t rtk_vlan_init(void) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_user_vlan4kentry vlan4K; - rtl8367c_vlanconfiguser vlanMC; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Clean Database */ - memset(vlan_mbrCfgVid, 0x00, sizeof(rtk_vlan_t) * RTL8367C_CVIDXNO); - memset(vlan_mbrCfgUsage, 0x00, sizeof(vlan_mbrCfgType_t) * RTL8367C_CVIDXNO); - - /* clean 32 VLAN member configuration */ - for (i = 0; i <= RTL8367C_CVIDXMAX; i++) - { - vlanMC.evid = 0; - vlanMC.mbr = 0; - vlanMC.fid_msti = 0; - vlanMC.envlanpol = 0; - vlanMC.meteridx = 0; - vlanMC.vbpen = 0; - vlanMC.vbpri = 0; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(i, &vlanMC)) != RT_ERR_OK) - return retVal; - } - - /* Set a default VLAN with vid 1 to 4K table for all ports */ - memset(&vlan4K, 0, sizeof(rtl8367c_user_vlan4kentry)); - vlan4K.vid = 1; - vlan4K.mbr = RTK_PHY_PORTMASK_ALL; - vlan4K.untag = RTK_PHY_PORTMASK_ALL; - vlan4K.fid_msti = 0; - if ((retVal = rtl8367c_setAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - - /* Also set the default VLAN to 32 member configuration index 0 */ - memset(&vlanMC, 0, sizeof(rtl8367c_vlanconfiguser)); - vlanMC.evid = 1; - vlanMC.mbr = RTK_PHY_PORTMASK_ALL; - vlanMC.fid_msti = 0; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(0, &vlanMC)) != RT_ERR_OK) - return retVal; - - /* Set all ports PVID to default VLAN and tag-mode to original */ - RTK_SCAN_ALL_PHY_PORTMASK(i) - { - if ((retVal = rtl8367c_setAsicVlanPortBasedVID(i, 0, 0)) != RT_ERR_OK) - return retVal; - if ((retVal = rtl8367c_setAsicVlanEgressTagMode(i, EG_TAG_MODE_ORI)) != RT_ERR_OK) - return retVal; - } - - /* Updata Databse */ - vlan_mbrCfgUsage[0] = MBRCFG_USED_BY_VLAN; - vlan_mbrCfgVid[0] = 1; - - /* Enable Ingress filter */ - RTK_SCAN_ALL_PHY_PORTMASK(i) - { - if ((retVal = rtl8367c_setAsicVlanIngressFilter(i, ENABLED)) != RT_ERR_OK) - return retVal; - } - - /* enable VLAN */ - if ((retVal = rtl8367c_setAsicVlanFilter(ENABLED)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_set - * Description: - * Set a VLAN entry. - * Input: - * vid - VLAN ID to configure. - * pVlanCfg - VLAN Configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_L2_FID - Invalid FID. - * RT_ERR_VLAN_PORT_MBR_EXIST - Invalid member port mask. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * - */ -rtk_api_ret_t rtk_vlan_set(rtk_vlan_t vid, rtk_vlan_cfg_t *pVlanCfg) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyMbrPmask; - rtk_uint32 phyUntagPmask; - rtl8367c_user_vlan4kentry vlan4K; - rtl8367c_vlanconfiguser vlanMC; - rtk_uint32 idx; - rtk_uint32 empty_index = 0xffff; - rtk_uint32 update_evid = 0; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~8191 */ - if (vid > RTL8367C_EVIDMAX) - return RT_ERR_VLAN_VID; - - /* Null pointer check */ - if(NULL == pVlanCfg) - return RT_ERR_NULL_POINTER; - - /* Check port mask valid */ - RTK_CHK_PORTMASK_VALID(&(pVlanCfg->mbr)); - - if (vid <= RTL8367C_VIDMAX) - { - /* Check untag port mask valid */ - RTK_CHK_PORTMASK_VALID(&(pVlanCfg->untag)); - } - - /* IVL_EN */ - if(pVlanCfg->ivl_en >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - /* fid must be 0~15 */ - if(pVlanCfg->fid_msti > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - /* Policing */ - if(pVlanCfg->envlanpol >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - /* Meter ID */ - if(pVlanCfg->meteridx > RTK_MAX_METER_ID) - return RT_ERR_INPUT; - - /* VLAN based priority */ - if(pVlanCfg->vbpen >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - /* Priority */ - if(pVlanCfg->vbpri > RTL8367C_PRIMAX) - return RT_ERR_INPUT; - - /* Get physical port mask */ - if(rtk_switch_portmask_L2P_get(&(pVlanCfg->mbr), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - if(rtk_switch_portmask_L2P_get(&(pVlanCfg->untag), &phyUntagPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - if (vid <= RTL8367C_VIDMAX) - { - /* update 4K table */ - memset(&vlan4K, 0, sizeof(rtl8367c_user_vlan4kentry)); - vlan4K.vid = vid; - - vlan4K.mbr = (phyMbrPmask & 0xFFFF); - vlan4K.untag = (phyUntagPmask & 0xFFFF); - - vlan4K.ivl_svl = pVlanCfg->ivl_en; - vlan4K.fid_msti = pVlanCfg->fid_msti; - vlan4K.envlanpol = pVlanCfg->envlanpol; - vlan4K.meteridx = pVlanCfg->meteridx; - vlan4K.vbpen = pVlanCfg->vbpen; - vlan4K.vbpri = pVlanCfg->vbpri; - - if ((retVal = rtl8367c_setAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - - /* Update Member configuration if exist */ - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if(vlan_mbrCfgUsage[idx] == MBRCFG_USED_BY_VLAN) - { - if(vlan_mbrCfgVid[idx] == vid) - { - /* Found! Update */ - if(phyMbrPmask == 0x00) - { - /* Member port = 0x00, delete this VLAN from Member Configuration */ - memset(&vlanMC, 0x00, sizeof(rtl8367c_vlanconfiguser)); - if ((retVal = rtl8367c_setAsicVlanMemberConfig(idx, &vlanMC)) != RT_ERR_OK) - return retVal; - - /* Clear Database */ - vlan_mbrCfgUsage[idx] = MBRCFG_UNUSED; - vlan_mbrCfgVid[idx] = 0; - } - else - { - /* Normal VLAN config, update to member configuration */ - vlanMC.evid = vid; - vlanMC.mbr = vlan4K.mbr; - vlanMC.fid_msti = vlan4K.fid_msti; - vlanMC.meteridx = vlan4K.meteridx; - vlanMC.envlanpol= vlan4K.envlanpol; - vlanMC.vbpen = vlan4K.vbpen; - vlanMC.vbpri = vlan4K.vbpri; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(idx, &vlanMC)) != RT_ERR_OK) - return retVal; - } - - break; - } - } - } - } - else - { - /* vid > 4095 */ - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if(vlan_mbrCfgUsage[idx] == MBRCFG_USED_BY_VLAN) - { - if(vlan_mbrCfgVid[idx] == vid) - { - /* Found! Update */ - if(phyMbrPmask == 0x00) - { - /* Member port = 0x00, delete this VLAN from Member Configuration */ - memset(&vlanMC, 0x00, sizeof(rtl8367c_vlanconfiguser)); - if ((retVal = rtl8367c_setAsicVlanMemberConfig(idx, &vlanMC)) != RT_ERR_OK) - return retVal; - - /* Clear Database */ - vlan_mbrCfgUsage[idx] = MBRCFG_UNUSED; - vlan_mbrCfgVid[idx] = 0; - } - else - { - /* Normal VLAN config, update to member configuration */ - vlanMC.evid = vid; - vlanMC.mbr = phyMbrPmask; - vlanMC.fid_msti = pVlanCfg->fid_msti; - vlanMC.meteridx = pVlanCfg->meteridx; - vlanMC.envlanpol= pVlanCfg->envlanpol; - vlanMC.vbpen = pVlanCfg->vbpen; - vlanMC.vbpri = pVlanCfg->vbpri; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(idx, &vlanMC)) != RT_ERR_OK) - return retVal; - - break; - } - - update_evid = 1; - } - } - - if(vlan_mbrCfgUsage[idx] == MBRCFG_UNUSED) - { - if(0xffff == empty_index) - empty_index = idx; - } - } - - /* doesn't find out same EVID entry and there is empty index in member configuration */ - if( (phyMbrPmask != 0x00) && (update_evid == 0) && (empty_index != 0xFFFF) ) - { - vlanMC.evid = vid; - vlanMC.mbr = phyMbrPmask; - vlanMC.fid_msti = pVlanCfg->fid_msti; - vlanMC.meteridx = pVlanCfg->meteridx; - vlanMC.envlanpol= pVlanCfg->envlanpol; - vlanMC.vbpen = pVlanCfg->vbpen; - vlanMC.vbpri = pVlanCfg->vbpri; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(empty_index, &vlanMC)) != RT_ERR_OK) - return retVal; - - vlan_mbrCfgUsage[empty_index] = MBRCFG_USED_BY_VLAN; - vlan_mbrCfgVid[empty_index] = vid; - - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_get - * Description: - * Get a VLAN entry. - * Input: - * vid - VLAN ID to configure. - * Output: - * pVlanCfg - VLAN Configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * - */ -rtk_api_ret_t rtk_vlan_get(rtk_vlan_t vid, rtk_vlan_cfg_t *pVlanCfg) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyMbrPmask; - rtk_uint32 phyUntagPmask; - rtl8367c_user_vlan4kentry vlan4K; - rtl8367c_vlanconfiguser vlanMC; - rtk_uint32 idx; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~8191 */ - if (vid > RTL8367C_EVIDMAX) - return RT_ERR_VLAN_VID; - - /* Null pointer check */ - if(NULL == pVlanCfg) - return RT_ERR_NULL_POINTER; - - if (vid <= RTL8367C_VIDMAX) - { - vlan4K.vid = vid; - - if ((retVal = rtl8367c_getAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - - phyMbrPmask = vlan4K.mbr; - phyUntagPmask = vlan4K.untag; - if(rtk_switch_portmask_P2L_get(phyMbrPmask, &(pVlanCfg->mbr)) != RT_ERR_OK) - return RT_ERR_FAILED; - - if(rtk_switch_portmask_P2L_get(phyUntagPmask, &(pVlanCfg->untag)) != RT_ERR_OK) - return RT_ERR_FAILED; - - pVlanCfg->ivl_en = vlan4K.ivl_svl; - pVlanCfg->fid_msti = vlan4K.fid_msti; - pVlanCfg->envlanpol = vlan4K.envlanpol; - pVlanCfg->meteridx = vlan4K.meteridx; - pVlanCfg->vbpen = vlan4K.vbpen; - pVlanCfg->vbpri = vlan4K.vbpri; - } - else - { - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if(vlan_mbrCfgUsage[idx] == MBRCFG_USED_BY_VLAN) - { - if(vlan_mbrCfgVid[idx] == vid) - { - if ((retVal = rtl8367c_getAsicVlanMemberConfig(idx, &vlanMC)) != RT_ERR_OK) - return retVal; - - phyMbrPmask = vlanMC.mbr; - if(rtk_switch_portmask_P2L_get(phyMbrPmask, &(pVlanCfg->mbr)) != RT_ERR_OK) - return RT_ERR_FAILED; - - pVlanCfg->untag.bits[0] = 0; - pVlanCfg->ivl_en = 0; - pVlanCfg->fid_msti = vlanMC.fid_msti; - pVlanCfg->envlanpol = vlanMC.envlanpol; - pVlanCfg->meteridx = vlanMC.meteridx; - pVlanCfg->vbpen = vlanMC.vbpen; - pVlanCfg->vbpri = vlanMC.vbpri; - } - } - } - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_egrFilterEnable_set - * Description: - * Set VLAN egress filter. - * Input: - * egrFilter - Egress filtering - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid input parameters. - * Note: - * - */ -rtk_api_ret_t rtk_vlan_egrFilterEnable_set(rtk_enable_t egrFilter) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(egrFilter >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - /* enable VLAN */ - if ((retVal = rtl8367c_setAsicVlanFilter((rtk_uint32)egrFilter)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_egrFilterEnable_get - * Description: - * Get VLAN egress filter. - * Input: - * pEgrFilter - Egress filtering - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - NULL Pointer. - * Note: - * - */ -rtk_api_ret_t rtk_vlan_egrFilterEnable_get(rtk_enable_t *pEgrFilter) -{ - rtk_api_ret_t retVal; - rtk_uint32 state; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEgrFilter) - return RT_ERR_NULL_POINTER; - - /* enable VLAN */ - if ((retVal = rtl8367c_getAsicVlanFilter(&state)) != RT_ERR_OK) - return retVal; - - *pEgrFilter = (rtk_enable_t)state; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_mbrCfg_set - * Description: - * Set a VLAN Member Configuration entry by index. - * Input: - * idx - Index of VLAN Member Configuration. - * pMbrcfg - VLAN member Configuration. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * Set a VLAN Member Configuration entry by index. - */ -rtk_api_ret_t rtk_vlan_mbrCfg_set(rtk_uint32 idx, rtk_vlan_mbrcfg_t *pMbrcfg) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyMbrPmask; - rtl8367c_vlanconfiguser mbrCfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error check */ - if(pMbrcfg == NULL) - return RT_ERR_NULL_POINTER; - - if(idx > RTL8367C_CVIDXMAX) - return RT_ERR_INPUT; - - if(pMbrcfg->evid > RTL8367C_EVIDMAX) - return RT_ERR_INPUT; - - if(pMbrcfg->fid_msti > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if(pMbrcfg->envlanpol >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pMbrcfg->meteridx > RTK_MAX_METER_ID) - return RT_ERR_FILTER_METER_ID; - - if(pMbrcfg->vbpen >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if(pMbrcfg->vbpri > RTL8367C_PRIMAX) - return RT_ERR_QOS_INT_PRIORITY; - - /* Check port mask valid */ - RTK_CHK_PORTMASK_VALID(&(pMbrcfg->mbr)); - - mbrCfg.evid = pMbrcfg->evid; - mbrCfg.fid_msti = pMbrcfg->fid_msti; - mbrCfg.envlanpol = pMbrcfg->envlanpol; - mbrCfg.meteridx = pMbrcfg->meteridx; - mbrCfg.vbpen = pMbrcfg->vbpen; - mbrCfg.vbpri = pMbrcfg->vbpri; - - if(rtk_switch_portmask_L2P_get(&(pMbrcfg->mbr), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - mbrCfg.mbr = phyMbrPmask; - - if ((retVal = rtl8367c_setAsicVlanMemberConfig(idx, &mbrCfg)) != RT_ERR_OK) - return retVal; - - /* Update Database */ - if( (mbrCfg.evid == 0) && (mbrCfg.mbr == 0) ) - { - vlan_mbrCfgUsage[idx] = MBRCFG_UNUSED; - vlan_mbrCfgVid[idx] = 0; - } - else - { - vlan_mbrCfgUsage[idx] = MBRCFG_USED_BY_VLAN; - vlan_mbrCfgVid[idx] = mbrCfg.evid; - } - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_vlan_mbrCfg_get - * Description: - * Get a VLAN Member Configuration entry by index. - * Input: - * idx - Index of VLAN Member Configuration. - * Output: - * pMbrcfg - VLAN member Configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * Get a VLAN Member Configuration entry by index. - */ -rtk_api_ret_t rtk_vlan_mbrCfg_get(rtk_uint32 idx, rtk_vlan_mbrcfg_t *pMbrcfg) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyMbrPmask; - rtl8367c_vlanconfiguser mbrCfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Error check */ - if(pMbrcfg == NULL) - return RT_ERR_NULL_POINTER; - - if(idx > RTL8367C_CVIDXMAX) - return RT_ERR_INPUT; - - memset(&mbrCfg, 0x00, sizeof(rtl8367c_vlanconfiguser)); - if ((retVal = rtl8367c_getAsicVlanMemberConfig(idx, &mbrCfg)) != RT_ERR_OK) - return retVal; - - pMbrcfg->evid = mbrCfg.evid; - pMbrcfg->fid_msti = mbrCfg.fid_msti; - pMbrcfg->envlanpol = mbrCfg.envlanpol; - pMbrcfg->meteridx = mbrCfg.meteridx; - pMbrcfg->vbpen = mbrCfg.vbpen; - pMbrcfg->vbpri = mbrCfg.vbpri; - - phyMbrPmask = mbrCfg.mbr; - if(rtk_switch_portmask_P2L_get(phyMbrPmask, &(pMbrcfg->mbr)) != RT_ERR_OK) - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portPvid_set - * Description: - * Set port to specified VLAN ID(PVID). - * Input: - * port - Port id. - * pvid - Specified VLAN ID. - * priority - 802.1p priority for the PVID. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_PRIORITY - Invalid priority. - * RT_ERR_VLAN_ENTRY_NOT_FOUND - VLAN entry not found. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * The API is used for Port-based VLAN. The untagged frame received from the - * port will be classified to the specified VLAN and assigned to the specified priority. - */ -rtk_api_ret_t rtk_vlan_portPvid_set(rtk_port_t port, rtk_vlan_t pvid, rtk_pri_t priority) -{ - rtk_api_ret_t retVal; - rtk_uint32 index; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /* vid must be 0~8191 */ - if (pvid > RTL8367C_EVIDMAX) - return RT_ERR_VLAN_VID; - - /* priority must be 0~7 */ - if (priority > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if((retVal = rtk_vlan_checkAndCreateMbr(pvid, &index)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicVlanPortBasedVID(rtk_switch_port_L2P_get(port), index, priority)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portPvid_get - * Description: - * Get VLAN ID(PVID) on specified port. - * Input: - * port - Port id. - * Output: - * pPvid - Specified VLAN ID. - * pPriority - 802.1p priority for the PVID. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get the PVID and 802.1p priority for the PVID of Port-based VLAN. - */ -rtk_api_ret_t rtk_vlan_portPvid_get(rtk_port_t port, rtk_vlan_t *pPvid, rtk_pri_t *pPriority) -{ - rtk_api_ret_t retVal; - rtk_uint32 index, pri; - rtl8367c_vlanconfiguser mbrCfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pPvid) - return RT_ERR_NULL_POINTER; - - if(NULL == pPriority) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanPortBasedVID(rtk_switch_port_L2P_get(port), &index, &pri)) != RT_ERR_OK) - return retVal; - - memset(&mbrCfg, 0x00, sizeof(rtl8367c_vlanconfiguser)); - if ((retVal = rtl8367c_getAsicVlanMemberConfig(index, &mbrCfg)) != RT_ERR_OK) - return retVal; - - *pPvid = mbrCfg.evid; - *pPriority = pri; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portIgrFilterEnable_set - * Description: - * Set VLAN ingress for each port. - * Input: - * port - Port id. - * igr_filter - VLAN ingress function enable status. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number - * RT_ERR_ENABLE - Invalid enable input - * Note: - * The status of vlan ingress filter is as following: - * - DISABLED - * - ENABLED - * While VLAN function is enabled, ASIC will decide VLAN ID for each received frame and get belonged member - * ports from VLAN table. If received port is not belonged to VLAN member ports, ASIC will drop received frame if VLAN ingress function is enabled. - */ -rtk_api_ret_t rtk_vlan_portIgrFilterEnable_set(rtk_port_t port, rtk_enable_t igr_filter) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (igr_filter >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicVlanIngressFilter(rtk_switch_port_L2P_get(port), igr_filter)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portIgrFilterEnable_get - * Description: - * Get VLAN Ingress Filter - * Input: - * port - Port id. - * Output: - * pIgr_filter - VLAN ingress function enable status. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can Get the VLAN ingress filter status. - * The status of vlan ingress filter is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_vlan_portIgrFilterEnable_get(rtk_port_t port, rtk_enable_t *pIgr_filter) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pIgr_filter) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanIngressFilter(rtk_switch_port_L2P_get(port), pIgr_filter)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portAcceptFrameType_set - * Description: - * Set VLAN accept_frame_type - * Input: - * port - Port id. - * accept_frame_type - accept frame type - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_ACCEPT_FRAME_TYPE - Invalid frame type. - * Note: - * The API is used for checking 802.1Q tagged frames. - * The accept frame type as following: - * - ACCEPT_FRAME_TYPE_ALL - * - ACCEPT_FRAME_TYPE_TAG_ONLY - * - ACCEPT_FRAME_TYPE_UNTAG_ONLY - */ -rtk_api_ret_t rtk_vlan_portAcceptFrameType_set(rtk_port_t port, rtk_vlan_acceptFrameType_t accept_frame_type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (accept_frame_type >= ACCEPT_FRAME_TYPE_END) - return RT_ERR_VLAN_ACCEPT_FRAME_TYPE; - - if ((retVal = rtl8367c_setAsicVlanAccpetFrameType(rtk_switch_port_L2P_get(port), (rtl8367c_accframetype)accept_frame_type)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portAcceptFrameType_get - * Description: - * Get VLAN accept_frame_type - * Input: - * port - Port id. - * Output: - * pAccept_frame_type - accept frame type - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can Get the VLAN ingress filter. - * The accept frame type as following: - * - ACCEPT_FRAME_TYPE_ALL - * - ACCEPT_FRAME_TYPE_TAG_ONLY - * - ACCEPT_FRAME_TYPE_UNTAG_ONLY - */ -rtk_api_ret_t rtk_vlan_portAcceptFrameType_get(rtk_port_t port, rtk_vlan_acceptFrameType_t *pAccept_frame_type) -{ - rtk_api_ret_t retVal; - rtl8367c_accframetype acc_frm_type; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pAccept_frame_type) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanAccpetFrameType(rtk_switch_port_L2P_get(port), &acc_frm_type)) != RT_ERR_OK) - return retVal; - - *pAccept_frame_type = (rtk_vlan_acceptFrameType_t)acc_frm_type; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_add - * Description: - * Add the protocol-and-port-based vlan to the specified port of device. - * Input: - * port - Port id. - * pInfo - Protocol and port based VLAN configuration information. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_VLAN_PRIORITY - Invalid priority. - * RT_ERR_TBL_FULL - Table is full. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * The frame type is shown in the following: - * - FRAME_TYPE_ETHERNET - * - FRAME_TYPE_RFC1042 - * - FRAME_TYPE_LLCOTHER - */ -rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_add(rtk_port_t port, rtk_vlan_protoAndPortInfo_t *pInfo) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 exist, empty, used, index; - rtl8367c_protocolgdatacfg ppb_data_cfg; - rtl8367c_protocolvlancfg ppb_vlan_cfg; - rtl8367c_provlan_frametype tmp; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pInfo) - return RT_ERR_NULL_POINTER; - - if (pInfo->proto_type > RTK_MAX_NUM_OF_PROTO_TYPE) - return RT_ERR_OUT_OF_RANGE; - - if (pInfo->frame_type >= FRAME_TYPE_END) - return RT_ERR_OUT_OF_RANGE; - - if (pInfo->cvid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if (pInfo->cpri > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - exist = 0xFF; - empty = 0xFF; - for (i = RTL8367C_PROTOVLAN_GIDX_MAX; i >= 0; i--) - { - if ((retVal = rtl8367c_getAsicVlanProtocolBasedGroupData(i, &ppb_data_cfg)) != RT_ERR_OK) - return retVal; - tmp = pInfo->frame_type; - if (ppb_data_cfg.etherType == pInfo->proto_type && ppb_data_cfg.frameType == tmp) - { - /*Already exist*/ - exist = i; - break; - } - else if (ppb_data_cfg.etherType == 0 && ppb_data_cfg.frameType == 0) - { - /*find empty index*/ - empty = i; - } - } - - used = 0xFF; - /*No empty and exist index*/ - if (0xFF == exist && 0xFF == empty) - return RT_ERR_TBL_FULL; - else if (existframe_type; - ppb_data_cfg.etherType = pInfo->proto_type; - if ((retVal = rtl8367c_setAsicVlanProtocolBasedGroupData(empty, &ppb_data_cfg)) != RT_ERR_OK) - return retVal; - used = empty; - } - else - return RT_ERR_FAILED; - - if((retVal = rtk_vlan_checkAndCreateMbr(pInfo->cvid, &index)) != RT_ERR_OK) - return retVal; - - ppb_vlan_cfg.vlan_idx = index; - ppb_vlan_cfg.valid = TRUE; - ppb_vlan_cfg.priority = pInfo->cpri; - if ((retVal = rtl8367c_setAsicVlanPortAndProtocolBased(rtk_switch_port_L2P_get(port), used, &ppb_vlan_cfg)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_get - * Description: - * Get the protocol-and-port-based vlan to the specified port of device. - * Input: - * port - Port id. - * proto_type - protocol-and-port-based vlan protocol type. - * frame_type - protocol-and-port-based vlan frame type. - * Output: - * pInfo - Protocol and port based VLAN configuration information. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_TBL_FULL - Table is full. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * The frame type is shown in the following: - * - FRAME_TYPE_ETHERNET - * - FRAME_TYPE_RFC1042 - * - FRAME_TYPE_LLCOTHER - */ -rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_get(rtk_port_t port, rtk_vlan_proto_type_t proto_type, rtk_vlan_protoVlan_frameType_t frame_type, rtk_vlan_protoAndPortInfo_t *pInfo) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 ppb_idx; - rtl8367c_protocolgdatacfg ppb_data_cfg; - rtl8367c_protocolvlancfg ppb_vlan_cfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (proto_type > RTK_MAX_NUM_OF_PROTO_TYPE) - return RT_ERR_OUT_OF_RANGE; - - if (frame_type >= FRAME_TYPE_END) - return RT_ERR_OUT_OF_RANGE; - - ppb_idx = 0; - - for (i = 0; i<= RTL8367C_PROTOVLAN_GIDX_MAX; i++) - { - if ((retVal = rtl8367c_getAsicVlanProtocolBasedGroupData(i, &ppb_data_cfg)) != RT_ERR_OK) - return retVal; - - if ( (ppb_data_cfg.frameType == (rtl8367c_provlan_frametype)frame_type) && (ppb_data_cfg.etherType == proto_type) ) - { - ppb_idx = i; - break; - } - else if (RTL8367C_PROTOVLAN_GIDX_MAX == i) - return RT_ERR_TBL_FULL; - } - - if ((retVal = rtl8367c_getAsicVlanPortAndProtocolBased(rtk_switch_port_L2P_get(port), ppb_idx, &ppb_vlan_cfg)) != RT_ERR_OK) - return retVal; - - if (FALSE == ppb_vlan_cfg.valid) - return RT_ERR_FAILED; - - pInfo->frame_type = frame_type; - pInfo->proto_type = proto_type; - pInfo->cvid = vlan_mbrCfgVid[ppb_vlan_cfg.vlan_idx]; - pInfo->cpri = ppb_vlan_cfg.priority; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_del - * Description: - * Delete the protocol-and-port-based vlan from the specified port of device. - * Input: - * port - Port id. - * proto_type - protocol-and-port-based vlan protocol type. - * frame_type - protocol-and-port-based vlan frame type. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_TBL_FULL - Table is full. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * The frame type is shown in the following: - * - FRAME_TYPE_ETHERNET - * - FRAME_TYPE_RFC1042 - * - FRAME_TYPE_LLCOTHER - */ -rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_del(rtk_port_t port, rtk_vlan_proto_type_t proto_type, rtk_vlan_protoVlan_frameType_t frame_type) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, bUsed; - rtk_uint32 ppb_idx; - rtl8367c_protocolgdatacfg ppb_data_cfg; - rtl8367c_protocolvlancfg ppb_vlan_cfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (proto_type > RTK_MAX_NUM_OF_PROTO_TYPE) - return RT_ERR_OUT_OF_RANGE; - - if (frame_type >= FRAME_TYPE_END) - return RT_ERR_OUT_OF_RANGE; - - ppb_idx = 0; - - for (i = 0; i<= RTL8367C_PROTOVLAN_GIDX_MAX; i++) - { - if ((retVal = rtl8367c_getAsicVlanProtocolBasedGroupData(i, &ppb_data_cfg)) != RT_ERR_OK) - return retVal; - - if ( (ppb_data_cfg.frameType == (rtl8367c_provlan_frametype)frame_type) && (ppb_data_cfg.etherType == proto_type) ) - { - ppb_idx = i; - ppb_vlan_cfg.valid = FALSE; - ppb_vlan_cfg.vlan_idx = 0; - ppb_vlan_cfg.priority = 0; - if ((retVal = rtl8367c_setAsicVlanPortAndProtocolBased(rtk_switch_port_L2P_get(port), ppb_idx, &ppb_vlan_cfg)) != RT_ERR_OK) - return retVal; - } - } - - bUsed = FALSE; - RTK_SCAN_ALL_PHY_PORTMASK(i) - { - if ((retVal = rtl8367c_getAsicVlanPortAndProtocolBased(i, ppb_idx, &ppb_vlan_cfg)) != RT_ERR_OK) - return retVal; - - if (TRUE == ppb_vlan_cfg.valid) - { - bUsed = TRUE; - break; - } - } - - if (FALSE == bUsed) /*No Port use this PPB Index, Delete it*/ - { - ppb_data_cfg.etherType=0; - ppb_data_cfg.frameType=0; - if ((retVal = rtl8367c_setAsicVlanProtocolBasedGroupData(ppb_idx, &ppb_data_cfg)) != RT_ERR_OK) - return retVal; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_protoAndPortBasedVlan_delAll - * Description: - * Delete all protocol-and-port-based vlans from the specified port of device. - * Input: - * port - Port id. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The incoming packet which match the protocol-and-port-based vlan will use the configure vid for ingress pipeline - * Delete all flow table protocol-and-port-based vlan entries. - */ -rtk_api_ret_t rtk_vlan_protoAndPortBasedVlan_delAll(rtk_port_t port) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, j, bUsed[4]; - rtl8367c_protocolgdatacfg ppb_data_cfg; - rtl8367c_protocolvlancfg ppb_vlan_cfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - for (i = 0; i<= RTL8367C_PROTOVLAN_GIDX_MAX; i++) - { - ppb_vlan_cfg.valid = FALSE; - ppb_vlan_cfg.vlan_idx = 0; - ppb_vlan_cfg.priority = 0; - if ((retVal = rtl8367c_setAsicVlanPortAndProtocolBased(rtk_switch_port_L2P_get(port), i, &ppb_vlan_cfg)) != RT_ERR_OK) - return retVal; - } - - bUsed[0] = FALSE; - bUsed[1] = FALSE; - bUsed[2] = FALSE; - bUsed[3] = FALSE; - RTK_SCAN_ALL_PHY_PORTMASK(i) - { - for (j = 0; j <= RTL8367C_PROTOVLAN_GIDX_MAX; j++) - { - if ((retVal = rtl8367c_getAsicVlanPortAndProtocolBased(i,j, &ppb_vlan_cfg)) != RT_ERR_OK) - return retVal; - - if (TRUE == ppb_vlan_cfg.valid) - { - bUsed[j] = TRUE; - } - } - } - - for (i = 0; i<= RTL8367C_PROTOVLAN_GIDX_MAX; i++) - { - if (FALSE == bUsed[i]) /*No Port use this PPB Index, Delete it*/ - { - ppb_data_cfg.etherType=0; - ppb_data_cfg.frameType=0; - if ((retVal = rtl8367c_setAsicVlanProtocolBasedGroupData(i, &ppb_data_cfg)) != RT_ERR_OK) - return retVal; - } - } - - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_tagMode_set - * Description: - * Set CVLAN egress tag mode - * Input: - * port - Port id. - * tag_mode - The egress tag mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * The API can set Egress tag mode. There are 4 mode for egress tag: - * - VLAN_TAG_MODE_ORIGINAL, - * - VLAN_TAG_MODE_KEEP_FORMAT, - * - VLAN_TAG_MODE_PRI. - * - VLAN_TAG_MODE_REAL_KEEP_FORMAT, - */ -rtk_api_ret_t rtk_vlan_tagMode_set(rtk_port_t port, rtk_vlan_tagMode_t tag_mode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (tag_mode >= VLAN_TAG_MODE_END) - return RT_ERR_PORT_ID; - - if ((retVal = rtl8367c_setAsicVlanEgressTagMode(rtk_switch_port_L2P_get(port), tag_mode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_tagMode_get - * Description: - * Get CVLAN egress tag mode - * Input: - * port - Port id. - * Output: - * pTag_mode - The egress tag mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get Egress tag mode. There are 4 mode for egress tag: - * - VLAN_TAG_MODE_ORIGINAL, - * - VLAN_TAG_MODE_KEEP_FORMAT, - * - VLAN_TAG_MODE_PRI. - * - VLAN_TAG_MODE_REAL_KEEP_FORMAT, - */ -rtk_api_ret_t rtk_vlan_tagMode_get(rtk_port_t port, rtk_vlan_tagMode_t *pTag_mode) -{ - rtk_api_ret_t retVal; - rtl8367c_egtagmode mode; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pTag_mode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanEgressTagMode(rtk_switch_port_L2P_get(port), &mode)) != RT_ERR_OK) - return retVal; - - *pTag_mode = (rtk_vlan_tagMode_t)mode; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_transparent_set - * Description: - * Set VLAN transparent mode - * Input: - * egr_port - Egress Port id. - * pIgr_pmask - Ingress Port Mask. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -rtk_api_ret_t rtk_vlan_transparent_set(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(egr_port); - - if(NULL == pIgr_pmask) - return RT_ERR_NULL_POINTER; - - RTK_CHK_PORTMASK_VALID(pIgr_pmask); - - if(rtk_switch_portmask_L2P_get(pIgr_pmask, &pmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - if ((retVal = rtl8367c_setAsicVlanTransparent(rtk_switch_port_L2P_get(egr_port), pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_transparent_get - * Description: - * Get VLAN transparent mode - * Input: - * egr_port - Egress Port id. - * Output: - * pIgr_pmask - Ingress Port Mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -rtk_api_ret_t rtk_vlan_transparent_get(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(egr_port); - - if(NULL == pIgr_pmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanTransparent(rtk_switch_port_L2P_get(egr_port), &pmask)) != RT_ERR_OK) - return retVal; - - if(rtk_switch_portmask_P2L_get(pmask, pIgr_pmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_keep_set - * Description: - * Set VLAN egress keep mode - * Input: - * egr_port - Egress Port id. - * pIgr_pmask - Ingress Port Mask. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -rtk_api_ret_t rtk_vlan_keep_set(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(egr_port); - - if(NULL == pIgr_pmask) - return RT_ERR_NULL_POINTER; - - RTK_CHK_PORTMASK_VALID(pIgr_pmask); - - if(rtk_switch_portmask_L2P_get(pIgr_pmask, &pmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - if ((retVal = rtl8367c_setAsicVlanEgressKeep(rtk_switch_port_L2P_get(egr_port), pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_keep_get - * Description: - * Get VLAN egress keep mode - * Input: - * egr_port - Egress Port id. - * Output: - * pIgr_pmask - Ingress Port Mask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * None. - */ -rtk_api_ret_t rtk_vlan_keep_get(rtk_port_t egr_port, rtk_portmask_t *pIgr_pmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(egr_port); - - if(NULL == pIgr_pmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanEgressKeep(rtk_switch_port_L2P_get(egr_port), &pmask)) != RT_ERR_OK) - return retVal; - - if(rtk_switch_portmask_P2L_get(pmask, pIgr_pmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_stg_set - * Description: - * Set spanning tree group instance of the vlan to the specified device - * Input: - * vid - Specified VLAN ID. - * stg - spanning tree group instance. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MSTI - Invalid msti parameter - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * The API can set spanning tree group instance of the vlan to the specified device. - */ -rtk_api_ret_t rtk_vlan_stg_set(rtk_vlan_t vid, rtk_stp_msti_id_t stg) -{ - rtk_api_ret_t retVal; - rtl8367c_user_vlan4kentry vlan4K; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~4095 */ - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* priority must be 0~15 */ - if (stg > RTL8367C_MSTIMAX) - return RT_ERR_MSTI; - - /* update 4K table */ - vlan4K.vid = vid; - if ((retVal = rtl8367c_getAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - - vlan4K.fid_msti= stg; - if ((retVal = rtl8367c_setAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_stg_get - * Description: - * Get spanning tree group instance of the vlan to the specified device - * Input: - * vid - Specified VLAN ID. - * Output: - * pStg - spanning tree group instance. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * Note: - * The API can get spanning tree group instance of the vlan to the specified device. - */ -rtk_api_ret_t rtk_vlan_stg_get(rtk_vlan_t vid, rtk_stp_msti_id_t *pStg) -{ - rtk_api_ret_t retVal; - rtl8367c_user_vlan4kentry vlan4K; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~4095 */ - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if(NULL == pStg) - return RT_ERR_NULL_POINTER; - - /* update 4K table */ - vlan4K.vid = vid; - if ((retVal = rtl8367c_getAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - - *pStg = vlan4K.fid_msti; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portFid_set - * Description: - * Set port-based filtering database - * Input: - * port - Port id. - * enable - ebable port-based FID - * fid - Specified filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_L2_FID - Invalid fid. - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can set port-based filtering database. If the function is enabled, all input - * packets will be assigned to the port-based fid regardless vlan tag. - */ -rtk_api_ret_t rtk_vlan_portFid_set(rtk_port_t port, rtk_enable_t enable, rtk_fid_t fid) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable>=RTK_ENABLE_END) - return RT_ERR_ENABLE; - - /* fid must be 0~4095 */ - if (fid > RTK_FID_MAX) - return RT_ERR_L2_FID; - - if ((retVal = rtl8367c_setAsicPortBasedFidEn(rtk_switch_port_L2P_get(port), enable))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicPortBasedFid(rtk_switch_port_L2P_get(port), fid))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_portFid_get - * Description: - * Get port-based filtering database - * Input: - * port - Port id. - * Output: - * pEnable - ebable port-based FID - * pFid - Specified filtering database. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * Note: - * The API can get port-based filtering database status. If the function is enabled, all input - * packets will be assigned to the port-based fid regardless vlan tag. - */ -rtk_api_ret_t rtk_vlan_portFid_get(rtk_port_t port, rtk_enable_t *pEnable, rtk_fid_t *pFid) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if(NULL == pFid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicPortBasedFidEn(rtk_switch_port_L2P_get(port), pEnable))!=RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicPortBasedFid(rtk_switch_port_L2P_get(port), pFid))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_UntagDscpPriorityEnable_set - * Description: - * Set Untag DSCP priority assign - * Input: - * enable - state of Untag DSCP priority assign - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid input parameters. - * Note: - * - */ -rtk_api_ret_t rtk_vlan_UntagDscpPriorityEnable_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicVlanUntagDscpPriorityEn((rtk_uint32)enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_UntagDscpPriorityEnable_get - * Description: - * Get Untag DSCP priority assign - * Input: - * None - * Output: - * pEnable - state of Untag DSCP priority assign - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - Null pointer - * Note: - * - */ -rtk_api_ret_t rtk_vlan_UntagDscpPriorityEnable_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtk_uint32 value; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicVlanUntagDscpPriorityEn(&value)) != RT_ERR_OK) - return retVal; - - *pEnable = (rtk_enable_t)value; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stp_mstpState_set - * Description: - * Configure spanning tree state per each port. - * Input: - * port - Port id - * msti - Multiple spanning tree instance. - * stp_state - Spanning tree state for msti - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MSTI - Invalid msti parameter. - * RT_ERR_MSTP_STATE - Invalid STP state. - * Note: - * System supports per-port multiple spanning tree state for each msti. - * There are four states supported by ASIC. - * - STP_STATE_DISABLED - * - STP_STATE_BLOCKING - * - STP_STATE_LEARNING - * - STP_STATE_FORWARDING - */ -rtk_api_ret_t rtk_stp_mstpState_set(rtk_stp_msti_id_t msti, rtk_port_t port, rtk_stp_state_t stp_state) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (msti > RTK_MAX_NUM_OF_MSTI) - return RT_ERR_MSTI; - - if (stp_state >= STP_STATE_END) - return RT_ERR_MSTP_STATE; - - if ((retVal = rtl8367c_setAsicSpanningTreeStatus(rtk_switch_port_L2P_get(port), msti, stp_state)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_stp_mstpState_get - * Description: - * Get spanning tree state per each port. - * Input: - * port - Port id. - * msti - Multiple spanning tree instance. - * Output: - * pStp_state - Spanning tree state for msti - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_MSTI - Invalid msti parameter. - * Note: - * System supports per-port multiple spanning tree state for each msti. - * There are four states supported by ASIC. - * - STP_STATE_DISABLED - * - STP_STATE_BLOCKING - * - STP_STATE_LEARNING - * - STP_STATE_FORWARDING - */ -rtk_api_ret_t rtk_stp_mstpState_get(rtk_stp_msti_id_t msti, rtk_port_t port, rtk_stp_state_t *pStp_state) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - if (msti > RTK_MAX_NUM_OF_MSTI) - return RT_ERR_MSTI; - - if(NULL == pStp_state) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSpanningTreeStatus(rtk_switch_port_L2P_get(port), msti, pStp_state)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_checkAndCreateMbr - * Description: - * Check and create Member configuration and return index - * Input: - * vid - VLAN id. - * Output: - * pIndex - Member configuration index - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VLAN ID. - * RT_ERR_VLAN_ENTRY_NOT_FOUND - VLAN not found - * RT_ERR_TBL_FULL - Member Configuration table full - * Note: - * - */ -rtk_api_ret_t rtk_vlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex) -{ - rtk_api_ret_t retVal; - rtl8367c_user_vlan4kentry vlan4K; - rtl8367c_vlanconfiguser vlanMC; - rtk_uint32 idx; - rtk_uint32 empty_idx = 0xFFFF; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~8191 */ - if (vid > RTL8367C_EVIDMAX) - return RT_ERR_VLAN_VID; - - /* Null pointer check */ - if(NULL == pIndex) - return RT_ERR_NULL_POINTER; - - /* Get 4K VLAN */ - if (vid <= RTL8367C_VIDMAX) - { - memset(&vlan4K, 0x00, sizeof(rtl8367c_user_vlan4kentry)); - vlan4K.vid = vid; - if ((retVal = rtl8367c_getAsicVlan4kEntry(&vlan4K)) != RT_ERR_OK) - return retVal; - } - - /* Search exist entry */ - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if(vlan_mbrCfgUsage[idx] == MBRCFG_USED_BY_VLAN) - { - if(vlan_mbrCfgVid[idx] == vid) - { - /* Found! return index */ - *pIndex = idx; - return RT_ERR_OK; - } - } - } - - /* Not found, Read H/W Member Configuration table to update database */ - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if ((retVal = rtl8367c_getAsicVlanMemberConfig(idx, &vlanMC)) != RT_ERR_OK) - return retVal; - - if( (vlanMC.evid == 0) && (vlanMC.mbr == 0x00)) - { - vlan_mbrCfgUsage[idx] = MBRCFG_UNUSED; - vlan_mbrCfgVid[idx] = 0; - } - else - { - vlan_mbrCfgUsage[idx] = MBRCFG_USED_BY_VLAN; - vlan_mbrCfgVid[idx] = vlanMC.evid; - } - } - - /* Search exist entry again */ - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if(vlan_mbrCfgUsage[idx] == MBRCFG_USED_BY_VLAN) - { - if(vlan_mbrCfgVid[idx] == vid) - { - /* Found! return index */ - *pIndex = idx; - return RT_ERR_OK; - } - } - } - - /* try to look up an empty index */ - for (idx = 0; idx <= RTL8367C_CVIDXMAX; idx++) - { - if(vlan_mbrCfgUsage[idx] == MBRCFG_UNUSED) - { - empty_idx = idx; - break; - } - } - - if(empty_idx == 0xFFFF) - { - /* No empty index */ - return RT_ERR_TBL_FULL; - } - - if (vid > RTL8367C_VIDMAX) - { - /* > 4K, there is no 4K entry, create on member configuration directly */ - memset(&vlanMC, 0x00, sizeof(rtl8367c_vlanconfiguser)); - vlanMC.evid = vid; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(empty_idx, &vlanMC)) != RT_ERR_OK) - return retVal; - } - else - { - /* Copy from 4K table */ - vlanMC.evid = vid; - vlanMC.mbr = vlan4K.mbr; - vlanMC.fid_msti = vlan4K.fid_msti; - vlanMC.meteridx= vlan4K.meteridx; - vlanMC.envlanpol= vlan4K.envlanpol; - vlanMC.vbpen = vlan4K.vbpen; - vlanMC.vbpri = vlan4K.vbpri; - if ((retVal = rtl8367c_setAsicVlanMemberConfig(empty_idx, &vlanMC)) != RT_ERR_OK) - return retVal; - } - - /* Update Database */ - vlan_mbrCfgUsage[empty_idx] = MBRCFG_USED_BY_VLAN; - vlan_mbrCfgVid[empty_idx] = vid; - - *pIndex = empty_idx; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_reservedVidAction_set - * Description: - * Set Action of VLAN ID = 0 & 4095 tagged packet - * Input: - * action_vid0 - Action for VID 0. - * action_vid4095 - Action for VID 4095. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_vlan_reservedVidAction_set(rtk_vlan_resVidAction_t action_vid0, rtk_vlan_resVidAction_t action_vid4095) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(action_vid0 >= RESVID_ACTION_END) - return RT_ERR_INPUT; - - if(action_vid4095 >= RESVID_ACTION_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setReservedVidAction((rtk_uint32)action_vid0, (rtk_uint32)action_vid4095)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_reservedVidAction_get - * Description: - * Get Action of VLAN ID = 0 & 4095 tagged packet - * Input: - * pAction_vid0 - Action for VID 0. - * pAction_vid4095 - Action for VID 4095. - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_NULL_POINTER - NULL Pointer - * Note: - * - */ -rtk_api_ret_t rtk_vlan_reservedVidAction_get(rtk_vlan_resVidAction_t *pAction_vid0, rtk_vlan_resVidAction_t *pAction_vid4095) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pAction_vid0 == NULL) - return RT_ERR_NULL_POINTER; - - if(pAction_vid4095 == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getReservedVidAction((rtk_uint32 *)pAction_vid0, (rtk_uint32 *)pAction_vid4095)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_realKeepRemarkEnable_set - * Description: - * Set Real keep 1p remarking feature - * Input: - * enabled - State of 1p remarking at real keep packet - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_vlan_realKeepRemarkEnable_set(rtk_enable_t enabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(enabled >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setRealKeepRemarkEn((rtk_uint32)enabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_realKeepRemarkEnable_get - * Description: - * Get Real keep 1p remarking feature - * Input: - * None. - * Output: - * pEnabled - State of 1p remarking at real keep packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_vlan_realKeepRemarkEnable_get(rtk_enable_t *pEnabled) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnabled) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getRealKeepRemarkEn((rtk_uint32 *)pEnabled)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_vlan_reset - * Description: - * Reset VLAN - * Input: - * None. - * Output: - * pEnabled - State of 1p remarking at real keep packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error Input - * Note: - * - */ -rtk_api_ret_t rtk_vlan_reset(void) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((retVal = rtl8367c_resetVlan()) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s.c deleted file mode 100644 index 6a55631d52..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s.c +++ /dev/null @@ -1,580 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include - -//include from rtl8367c dir -#include "./rtl8367c/include/rtk_switch.h" -#include "./rtl8367c/include/vlan.h" -#include "./rtl8367c/include/stat.h" -#include "./rtl8367c/include/port.h" - -#define RTL8367C_SW_CPU_PORT 6 - - //RTL8367C_PHY_PORT_NUM + ext0 + ext1 -#define RTL8367C_NUM_PORTS 7 -#define RTL8367C_NUM_VIDS 4096 - -struct rtl8367_priv { - struct switch_dev swdev; - bool global_vlan_enable; -}; - -struct rtl8367_mib_counter { - const char *name; -}; - -struct rtl8367_vlan_info { - unsigned short vid; - unsigned int untag; - unsigned int member; - unsigned char fid; -}; - -struct rtl8367_priv rtl8367_priv_data; - -unsigned int rtl8367c_port_id[RTL8367C_NUM_PORTS]={0,1,2,3,4,EXT_PORT1,EXT_PORT0}; - -void (*rtl8367_switch_reset_func)(void)=NULL; - -static struct rtl8367_mib_counter rtl8367c_mib_counters[] = { - {"ifInOctets"}, - {"dot3StatsFCSErrors"}, - {"dot3StatsSymbolErrors"}, - {"dot3InPauseFrames"}, - {"dot3ControlInUnknownOpcodes"}, - {"etherStatsFragments"}, - {"etherStatsJabbers"}, - {"ifInUcastPkts"}, - {"etherStatsDropEvents"}, - {"etherStatsOctets"}, - {"etherStatsUndersizePkts"}, - {"etherStatsOversizePkts"}, - {"etherStatsPkts64Octets"}, - {"etherStatsPkts65to127Octets"}, - {"etherStatsPkts128to255Octets"}, - {"etherStatsPkts256to511Octets"}, - {"etherStatsPkts512to1023Octets"}, - {"etherStatsPkts1024toMaxOctets"}, - {"etherStatsMcastPkts"}, - {"etherStatsBcastPkts"}, - {"ifOutOctets"}, - {"dot3StatsSingleCollisionFrames"}, - {"dot3StatsMultipleCollisionFrames"}, - {"dot3StatsDeferredTransmissions"}, - {"dot3StatsLateCollisions"}, - {"etherStatsCollisions"}, - {"dot3StatsExcessiveCollisions"}, - {"dot3OutPauseFrames"}, - {"dot1dBasePortDelayExceededDiscards"}, - {"dot1dTpPortInDiscards"}, - {"ifOutUcastPkts"}, - {"ifOutMulticastPkts"}, - {"ifOutBrocastPkts"}, - {"outOampduPkts"}, - {"inOampduPkts"}, - {"pktgenPkts"}, - {"inMldChecksumError"}, - {"inIgmpChecksumError"}, - {"inMldSpecificQuery"}, - {"inMldGeneralQuery"}, - {"inIgmpSpecificQuery"}, - {"inIgmpGeneralQuery"}, - {"inMldLeaves"}, - {"inIgmpLeaves"}, - {"inIgmpJoinsSuccess"}, - {"inIgmpJoinsFail"}, - {"inMldJoinsSuccess"}, - {"inMldJoinsFail"}, - {"inReportSuppressionDrop"}, - {"inLeaveSuppressionDrop"}, - {"outIgmpReports"}, - {"outIgmpLeaves"}, - {"outIgmpGeneralQuery"}, - {"outIgmpSpecificQuery"}, - {"outMldReports"}, - {"outMldLeaves"}, - {"outMldGeneralQuery"}, - {"outMldSpecificQuery"}, - {"inKnownMulticastPkts"}, - {"ifInMulticastPkts"}, - {"ifInBroadcastPkts"}, - {"ifOutDiscards"} -}; - -/*rtl8367c proprietary switch API wrapper */ -static inline unsigned int rtl8367c_sw_to_phy_port(int port) -{ - return rtl8367c_port_id[port]; -} - -static inline unsigned int rtl8367c_portmask_phy_to_sw(rtk_portmask_t phy_portmask) -{ - int i; - for (i = 0; i < RTL8367C_NUM_PORTS; i++) { - if(RTK_PORTMASK_IS_PORT_SET(phy_portmask,rtl8367c_sw_to_phy_port(i))) { - RTK_PORTMASK_PORT_CLEAR(phy_portmask,rtl8367c_sw_to_phy_port(i)); - RTK_PORTMASK_PORT_SET(phy_portmask,i); - } - - } - return (unsigned int)phy_portmask.bits[0]; -} - -static int rtl8367c_reset_mibs(void) -{ - return rtk_stat_global_reset(); -} - -static int rtl8367c_reset_port_mibs(int port) -{ - - return rtk_stat_port_reset(rtl8367c_sw_to_phy_port(port)); -} - -static int rtl8367c_get_mibs_num(void) -{ - return ARRAY_SIZE(rtl8367c_mib_counters); -} - -static const char *rtl8367c_get_mib_name(int idx) -{ - - return rtl8367c_mib_counters[idx].name; -} - -static int rtl8367c_get_port_mib_counter(int idx, int port, unsigned long long *counter) -{ - return rtk_stat_port_get(rtl8367c_sw_to_phy_port(port), idx, counter); -} - -static int rtl8367c_is_vlan_valid(unsigned int vlan) -{ - unsigned max = RTL8367C_NUM_VIDS; - - if (vlan == 0 || vlan >= max) - return 0; - - return 1; -} - -static int rtl8367c_get_vlan( unsigned short vid, struct rtl8367_vlan_info *vlan) -{ - rtk_vlan_cfg_t vlan_cfg; - - memset(vlan, '\0', sizeof(struct rtl8367_vlan_info)); - - if (vid >= RTL8367C_NUM_VIDS) - return -EINVAL; - - if(rtk_vlan_get(vid,&vlan_cfg)) - return -EINVAL; - - vlan->vid = vid; - vlan->member = rtl8367c_portmask_phy_to_sw(vlan_cfg.mbr); - vlan->untag = rtl8367c_portmask_phy_to_sw(vlan_cfg.untag); - vlan->fid = vlan_cfg.fid_msti; - - return 0; -} - -static int rtl8367c_set_vlan( unsigned short vid, u32 mbr, u32 untag, u8 fid) -{ - rtk_vlan_cfg_t vlan_cfg; - int i; - - memset(&vlan_cfg, 0x00, sizeof(rtk_vlan_cfg_t)); - - for (i = 0; i < RTL8367C_NUM_PORTS; i++) { - if (mbr & (1 << i)) { - RTK_PORTMASK_PORT_SET(vlan_cfg.mbr, rtl8367c_sw_to_phy_port(i)); - if(untag & (1 << i)) - RTK_PORTMASK_PORT_SET(vlan_cfg.untag, rtl8367c_sw_to_phy_port(i)); - } - } - vlan_cfg.fid_msti=fid; - vlan_cfg.ivl_en = 1; - return rtk_vlan_set(vid, &vlan_cfg); -} - - -static int rtl8367c_get_pvid( int port, int *pvid) -{ - u32 prio=0; - - if (port >= RTL8367C_NUM_PORTS) - return -EINVAL; - - return rtk_vlan_portPvid_get(rtl8367c_sw_to_phy_port(port),pvid,&prio); -} - - -static int rtl8367c_set_pvid( int port, int pvid) -{ - u32 prio=0; - - if (port >= RTL8367C_NUM_PORTS) - return -EINVAL; - - return rtk_vlan_portPvid_set(rtl8367c_sw_to_phy_port(port),pvid,prio); -} - -static int rtl8367c_get_port_link(int port, int *link, int *speed, int *duplex) -{ - - if(rtk_port_phyStatus_get(rtl8367c_sw_to_phy_port(port),(rtk_port_linkStatus_t *)link, - (rtk_port_speed_t *)speed,(rtk_port_duplex_t *)duplex)) - return -EINVAL; - - return 0; -} - -/*common rtl8367 swconfig entry API*/ - -static int -rtl8367_sw_set_vlan_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct rtl8367_priv *priv = container_of(dev, struct rtl8367_priv, swdev); - - priv->global_vlan_enable = val->value.i ; - - return 0; -} - -static int -rtl8367_sw_get_vlan_enable(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - struct rtl8367_priv *priv = container_of(dev, struct rtl8367_priv, swdev); - - val->value.i = priv->global_vlan_enable; - - return 0; -} - -static int rtl8367_sw_reset_mibs(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - return rtl8367c_reset_mibs(); -} - - -static int rtl8367_sw_reset_port_mibs(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - int port; - - port = val->port_vlan; - if (port >= RTL8367C_NUM_PORTS) - return -EINVAL; - - return rtl8367c_reset_port_mibs(port); -} - -static int rtl8367_sw_get_port_mib(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - int i, len = 0; - unsigned long long counter = 0; - static char mib_buf[4096]; - - if (val->port_vlan >= RTL8367C_NUM_PORTS) - return -EINVAL; - - len += snprintf(mib_buf + len, sizeof(mib_buf) - len, - "Port %d MIB counters\n", - val->port_vlan); - - for (i = 0; i port_vlan, - &counter)) - len += snprintf(mib_buf + len, sizeof(mib_buf) - len, - "%llu\n", counter); - else - len += snprintf(mib_buf + len, sizeof(mib_buf) - len, - "%s\n", "N/A"); - } - - val->value.s = mib_buf; - val->len = len; - return 0; -} - - -static int rtl8367_sw_get_vlan_info(struct switch_dev *dev, - const struct switch_attr *attr, - struct switch_val *val) -{ - int i; - u32 len = 0; - struct rtl8367_vlan_info vlan; - static char vlan_buf[256]; - int err; - - if (!rtl8367c_is_vlan_valid(val->port_vlan)) - return -EINVAL; - - memset(vlan_buf, '\0', sizeof(vlan_buf)); - - err = rtl8367c_get_vlan(val->port_vlan, &vlan); - if (err) - return err; - - len += snprintf(vlan_buf + len, sizeof(vlan_buf) - len, - "VLAN %d: Ports: '", vlan.vid); - - for (i = 0; i value.s = vlan_buf; - val->len = len; - - return 0; -} - - -static int rtl8367_sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct switch_port *port; - struct rtl8367_vlan_info vlan; - int i; - - if (!rtl8367c_is_vlan_valid(val->port_vlan)) - return -EINVAL; - - if(rtl8367c_get_vlan(val->port_vlan, &vlan)) - return -EINVAL; - - port = &val->value.ports[0]; - val->len = 0; - for (i = 0; i id = i; - port->flags = (vlan.untag & BIT(i)) ? - 0 : BIT(SWITCH_PORT_FLAG_TAGGED); - val->len++; - port++; - } - return 0; -} - - -static int rtl8367_sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) -{ - struct switch_port *port; - u32 member = 0; - u32 untag = 0; - u8 fid=0; - int err; - int i; - - if (!rtl8367c_is_vlan_valid(val->port_vlan)) - return -EINVAL; - - port = &val->value.ports[0]; - for (i = 0; i < val->len; i++, port++) { - int pvid = 0; - member |= BIT(port->id); - - if (!(port->flags & BIT(SWITCH_PORT_FLAG_TAGGED))) - untag |= BIT(port->id); - - /* - * To ensure that we have a valid MC entry for this VLAN, - * initialize the port VLAN ID here. - */ - err = rtl8367c_get_pvid(port->id, &pvid); - if (err < 0) - return err; - if (pvid == 0) { - err = rtl8367c_set_pvid(port->id, val->port_vlan); - if (err < 0) - return err; - } - } - - //pr_info("[%s] vid=%d , mem=%x,untag=%x,fid=%d \n",__func__,val->port_vlan,member,untag,fid); - - return rtl8367c_set_vlan(val->port_vlan, member, untag, fid); - -} - - -static int rtl8367_sw_get_port_pvid(struct switch_dev *dev, int port, int *val) -{ - return rtl8367c_get_pvid(port, val); -} - - -static int rtl8367_sw_set_port_pvid(struct switch_dev *dev, int port, int val) -{ - return rtl8367c_set_pvid(port, val); -} - - -static int rtl8367_sw_reset_switch(struct switch_dev *dev) -{ - if(rtl8367_switch_reset_func) - (*rtl8367_switch_reset_func)(); - else - printk("rest switch is not supported\n"); - - return 0; -} - -static int rtl8367_sw_get_port_link(struct switch_dev *dev, int port, - struct switch_port_link *link) -{ - int speed; - - if (port >= RTL8367C_NUM_PORTS) - return -EINVAL; - - if(rtl8367c_get_port_link(port,(int *)&link->link,(int *)&speed,(int *)&link->duplex)) - return -EINVAL; - - if (!link->link) - return 0; - - switch (speed) { - case 0: - link->speed = SWITCH_PORT_SPEED_10; - break; - case 1: - link->speed = SWITCH_PORT_SPEED_100; - break; - case 2: - link->speed = SWITCH_PORT_SPEED_1000; - break; - default: - link->speed = SWITCH_PORT_SPEED_UNKNOWN; - break; - } - - return 0; -} - - -static struct switch_attr rtl8367_globals[] = { - { - .type = SWITCH_TYPE_INT, - .name = "enable_vlan", - .description = "Enable VLAN mode", - .set = rtl8367_sw_set_vlan_enable, - .get = rtl8367_sw_get_vlan_enable, - .max = 1, - }, { - .type = SWITCH_TYPE_NOVAL, - .name = "reset_mibs", - .description = "Reset all MIB counters", - .set = rtl8367_sw_reset_mibs, - } -}; - -static struct switch_attr rtl8367_port[] = { - { - .type = SWITCH_TYPE_NOVAL, - .name = "reset_mib", - .description = "Reset single port MIB counters", - .set = rtl8367_sw_reset_port_mibs, - }, { - .type = SWITCH_TYPE_STRING, - .name = "mib", - .description = "Get MIB counters for port", - //.max = 33, - .set = NULL, - .get = rtl8367_sw_get_port_mib, - }, -}; - -static struct switch_attr rtl8367_vlan[] = { - { - .type = SWITCH_TYPE_STRING, - .name = "info", - .description = "Get vlan information", - .max = 1, - .set = NULL, - .get = rtl8367_sw_get_vlan_info, - }, -}; - -static const struct switch_dev_ops rtl8367_sw_ops = { - .attr_global = { - .attr = rtl8367_globals, - .n_attr = ARRAY_SIZE(rtl8367_globals), - }, - .attr_port = { - .attr = rtl8367_port, - .n_attr = ARRAY_SIZE(rtl8367_port), - }, - .attr_vlan = { - .attr = rtl8367_vlan, - .n_attr = ARRAY_SIZE(rtl8367_vlan), - }, - - .get_vlan_ports = rtl8367_sw_get_vlan_ports, - .set_vlan_ports = rtl8367_sw_set_vlan_ports, - .get_port_pvid = rtl8367_sw_get_port_pvid, - .set_port_pvid = rtl8367_sw_set_port_pvid, - .reset_switch = rtl8367_sw_reset_switch, - .get_port_link = rtl8367_sw_get_port_link, -}; - -int rtl8367s_swconfig_init(void (*reset_func)(void)) -{ - struct rtl8367_priv *priv = &rtl8367_priv_data; - struct switch_dev *dev=&priv->swdev; - int err=0; - - rtl8367_switch_reset_func = reset_func ; - - memset(priv, 0, sizeof(struct rtl8367_priv)); - priv->global_vlan_enable =0; - - dev->name = "RTL8367C"; - dev->cpu_port = RTL8367C_SW_CPU_PORT; - dev->ports = RTL8367C_NUM_PORTS; - dev->vlans = RTL8367C_NUM_VIDS; - dev->ops = &rtl8367_sw_ops; - dev->alias = "RTL8367C"; - err = register_switch(dev, NULL); - - pr_info("[%s]\n",__func__); - - return err; -} diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s_dbg.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s_dbg.c deleted file mode 100644 index ec86679714..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s_dbg.c +++ /dev/null @@ -1,655 +0,0 @@ -#include -#include -#include -#include -#include - -#include "./rtl8367c/include/rtk_switch.h" -#include "./rtl8367c/include/port.h" -#include "./rtl8367c/include/vlan.h" -#include "./rtl8367c/include/rtl8367c_asicdrv_port.h" -#include "./rtl8367c/include/stat.h" -#include "./rtl8367c/include/l2.h" -#include "./rtl8367c/include/smi.h" -#include "./rtl8367c/include/mirror.h" -#include "./rtl8367c/include/igmp.h" -#include "./rtl8367c/include/leaky.h" - -static struct proc_dir_entry *proc_reg_dir; -static struct proc_dir_entry *proc_esw_cnt; -static struct proc_dir_entry *proc_vlan_cnt; -static struct proc_dir_entry *proc_mac_tbl; -static struct proc_dir_entry *proc_reg; -static struct proc_dir_entry *proc_phyreg; -static struct proc_dir_entry *proc_mirror; -static struct proc_dir_entry *proc_igmp; - -#define PROCREG_ESW_CNT "esw_cnt" -#define PROCREG_VLAN "vlan" -#define PROCREG_MAC_TBL "mac_tbl" -#define PROCREG_REG "reg" -#define PROCREG_PHYREG "phyreg" -#define PROCREG_MIRROR "mirror" -#define PROCREG_IGMP "igmp" -#define PROCREG_DIR "rtk_gsw" - -#define RTK_SW_VID_RANGE 16 - -static void rtk_dump_mib_type(rtk_stat_port_type_t cntr_idx) -{ - rtk_port_t port; - rtk_stat_counter_t Cntr; - - for (port = UTP_PORT0; port < (UTP_PORT0 + 5); port++) { - rtk_stat_port_get(port, cntr_idx, &Cntr); - printk("%8llu", Cntr); - } - - for (port = EXT_PORT0; port < (EXT_PORT0 + 2); port++) { - rtk_stat_port_get(port, cntr_idx, &Cntr); - printk("%8llu", Cntr); - } - - printk("\n"); -} -static void rtk_hal_dump_mib(void) -{ - - printk("==================%8s%8s%8s%8s%8s%8s%8s\n", "Port0", "Port1", - "Port2", "Port3", "Port4", "Port16", "Port17"); - /* Get TX Unicast Pkts */ - printk("TX Unicast Pkts :"); - rtk_dump_mib_type(STAT_IfOutUcastPkts); - /* Get TX Multicast Pkts */ - printk("TX Multicast Pkts:"); - rtk_dump_mib_type(STAT_IfOutMulticastPkts); - /* Get TX BroadCast Pkts */ - printk("TX BroadCast Pkts:"); - rtk_dump_mib_type(STAT_IfOutBroadcastPkts); - /* Get TX Collisions */ - /* Get TX Puase Frames */ - printk("TX Pause Frames :"); - rtk_dump_mib_type(STAT_Dot3OutPauseFrames); - /* Get TX Drop Events */ - /* Get RX Unicast Pkts */ - printk("RX Unicast Pkts :"); - rtk_dump_mib_type(STAT_IfInUcastPkts); - /* Get RX Multicast Pkts */ - printk("RX Multicast Pkts:"); - rtk_dump_mib_type(STAT_IfInMulticastPkts); - /* Get RX Broadcast Pkts */ - printk("RX Broadcast Pkts:"); - rtk_dump_mib_type(STAT_IfInBroadcastPkts); - /* Get RX FCS Erros */ - printk("RX FCS Errors :"); - rtk_dump_mib_type(STAT_Dot3StatsFCSErrors); - /* Get RX Undersize Pkts */ - printk("RX Undersize Pkts:"); - rtk_dump_mib_type(STAT_EtherStatsUnderSizePkts); - /* Get RX Discard Pkts */ - printk("RX Discard Pkts :"); - rtk_dump_mib_type(STAT_Dot1dTpPortInDiscards); - /* Get RX Fragments */ - printk("RX Fragments :"); - rtk_dump_mib_type(STAT_EtherStatsFragments); - /* Get RX Oversize Pkts */ - printk("RX Oversize Pkts :"); - rtk_dump_mib_type(STAT_EtherOversizeStats); - /* Get RX Jabbers */ - printk("RX Jabbers :"); - rtk_dump_mib_type(STAT_EtherStatsJabbers); - /* Get RX Pause Frames */ - printk("RX Pause Frames :"); - rtk_dump_mib_type(STAT_Dot3InPauseFrames); - /* clear MIB */ - rtk_stat_global_reset(); - -} - -static int rtk_hal_dump_vlan(void) -{ - rtk_vlan_cfg_t vlan; - int i; - - printk("vid portmap\n"); - for (i = 0; i < RTK_SW_VID_RANGE; i++) { - rtk_vlan_get(i, &vlan); - printk("%3d ", i); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT0) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT1) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT2) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT3) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - UTP_PORT4) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - EXT_PORT0) ? '1' : '-'); - printk("%c", - RTK_PORTMASK_IS_PORT_SET(vlan.mbr, - EXT_PORT1) ? '1' : '-'); - printk("\n"); - } - - return 0; -} - -static void rtk_hal_dump_table(void) -{ - rtk_uint32 i; - rtk_uint32 address = 0; - rtk_l2_ucastAddr_t l2_data; - rtk_l2_ipMcastAddr_t ipMcastAddr; - rtk_l2_age_time_t age_timout; - - rtk_l2_aging_get(&age_timout); - printk("Mac table age timeout =%d\n",(unsigned int)age_timout); - - printk("hash port(0:17) fid vid mac-address\n"); - while (1) { - if (rtk_l2_addr_next_get(READMETHOD_NEXT_L2UC, UTP_PORT0, &address, &l2_data) != RT_ERR_OK) { - break; - } else { - printk("%03x ", l2_data.address); - for (i = 0; i < 5; i++) - if ( l2_data.port == i) - printk("1"); - else - printk("-"); - for (i = 16; i < 18; i++) - if ( l2_data.port == i) - printk("1"); - else - printk("-"); - - printk(" %2d", l2_data.fid); - printk(" %4d", l2_data.cvid); - printk(" %02x%02x%02x%02x%02x%02x\n", l2_data.mac.octet[0], - l2_data.mac.octet[1], l2_data.mac.octet[2], l2_data.mac.octet[3], - l2_data.mac.octet[4], l2_data.mac.octet[5]); - address ++; - } - } - - address = 0; - while (1) { - if (rtk_l2_ipMcastAddr_next_get(&address, &ipMcastAddr) != RT_ERR_OK) { - break; - } else { - printk("%03x ", ipMcastAddr.address); - for (i = 0; i < 5; i++) - printk("%c", RTK_PORTMASK_IS_PORT_SET(ipMcastAddr.portmask, i) ? '1' : '-'); - for (i = 16; i < 18; i++) - printk("%c", RTK_PORTMASK_IS_PORT_SET(ipMcastAddr.portmask, i) ? '1' : '-'); - printk(" "); - printk("01005E%06x\n", (ipMcastAddr.dip & 0xefffff)); - address ++; - } - } -} - -static void rtk_hal_clear_table(void) -{ - rtk_api_ret_t ret; - - ret = rtk_l2_table_clear(); - if (ret != RT_ERR_OK) - printk("rtk_l2_table_clear failed\n"); -} - -static void rtk_hal_read_reg(unsigned int reg_addr) -{ - ret_t retVal; - unsigned int reg_val; - - retVal = smi_read(reg_addr, ®_val); - - if(retVal != RT_ERR_OK) - printk("switch reg read failed\n"); - else - printk("reg0x%x = 0x%x\n", reg_addr, reg_val); -} - -static void rtk_hal_write_reg(unsigned int reg_addr , unsigned int reg_val) -{ - ret_t retVal; - - retVal = smi_write(reg_addr, reg_val); - - if(retVal != RT_ERR_OK) - printk("switch reg write failed\n"); - else - printk("write switch reg0x%x 0x%x success\n", reg_addr, reg_val); -} - -static void rtk_hal_get_phy_reg(unsigned int port ,unsigned int reg_addr ) -{ - ret_t retVal; - rtk_port_phy_data_t Data; - - retVal = rtk_port_phyReg_get(port, reg_addr, &Data); - if (retVal == RT_ERR_OK) - printk("Get: phy[%d].reg[%d] = 0x%04x\n", port, reg_addr, Data); - else - printk("read phy reg failed\n"); -} - -static void rtk_hal_set_phy_reg(unsigned int port ,unsigned int reg_addr,unsigned int reg_val) -{ - ret_t retVal; - - retVal = rtk_port_phyReg_set(port, reg_addr, reg_val); - if (retVal == RT_ERR_OK) - printk("Set: phy[%d].reg[%d] = 0x%04x\n", port, reg_addr, reg_val); - else - printk("write phy reg failed\n"); -} - -static void rtk_hal_set_port_mirror(unsigned int port ,unsigned int rx_port_map,unsigned int tx_port_map) -{ - rtk_portmask_t rx_portmask; - rtk_portmask_t tx_portmask; - rtk_api_ret_t ret; - int i; - - rtk_mirror_portIso_set(ENABLED); - RTK_PORTMASK_CLEAR(rx_portmask); - RTK_PORTMASK_CLEAR(tx_portmask); - - for (i = 0; i < 5; i++) - if (rx_port_map & (1 << i)) - RTK_PORTMASK_PORT_SET(rx_portmask, i); - - for (i = 0; i < 2; i++) - if (rx_port_map & (1 << (i + 5))) - RTK_PORTMASK_PORT_SET(rx_portmask, (i + EXT_PORT0)); - - RTK_PORTMASK_CLEAR(tx_portmask); - - for (i = 0; i < 5; i++) - if (tx_port_map & (1 << i)) - RTK_PORTMASK_PORT_SET(tx_portmask, i); - - for (i = 0; i < 2; i++) - if (tx_port_map & (1 << (i + 5))) - RTK_PORTMASK_PORT_SET(tx_portmask, (i + EXT_PORT0)); - - ret = rtk_mirror_portBased_set(port, &rx_portmask, &tx_portmask); - - if (!ret) - printk("rtk_mirror_portBased_set success\n"); - -} - -static void rtk_hal_enable_igmpsnoop(int hw_on) -{ - rtk_api_ret_t ret; - rtk_portmask_t pmask; - - ret = rtk_igmp_init(); - if (hw_on == 1) { - RTK_PORTMASK_CLEAR(pmask); - RTK_PORTMASK_PORT_SET(pmask, EXT_PORT0); - ret |= rtk_igmp_static_router_port_set(&pmask); - ret |= rtk_igmp_protocol_set(UTP_PORT4, PROTOCOL_IGMPv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(UTP_PORT4, PROTOCOL_IGMPv2, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(UTP_PORT4, PROTOCOL_MLDv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(EXT_PORT1, PROTOCOL_IGMPv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(EXT_PORT1, PROTOCOL_IGMPv2, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(EXT_PORT1, PROTOCOL_MLDv1, IGMP_ACTION_FORWARD); - ret |= rtk_igmp_protocol_set(UTP_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT1, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT2, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT3, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(EXT_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - - ret |= rtk_leaky_vlan_set(LEAKY_IPMULTICAST, ENABLED); - ret |= rtk_l2_ipMcastForwardRouterPort_set(DISABLED); - /* drop unknown multicast packets*/ - /* ret |= rtk_trap_unknownMcastPktAction_set(UTP_PORT4, MCAST_IPV4, MCAST_ACTION_DROP);*/ - } else { - RTK_PORTMASK_CLEAR(pmask); - RTK_PORTMASK_PORT_SET(pmask, EXT_PORT0); - RTK_PORTMASK_PORT_SET(pmask, EXT_PORT1); - ret |= rtk_igmp_protocol_set(UTP_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT1, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT2, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(UTP_PORT3, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - ret |= rtk_igmp_protocol_set(EXT_PORT0, PROTOCOL_IGMPv3, IGMP_ACTION_ASIC); - - ret |= rtk_igmp_static_router_port_set(&pmask); - } - - if(ret != RT_ERR_OK) - printk("enable switch igmpsnoop failed\n"); - -} - -static void rtk_hal_disable_igmpsnoop(void) -{ - if (rtk_igmp_state_set(DISABLED) != RT_ERR_OK) - printk("Disable IGMP SNOOPING failed\n"); -} - -static ssize_t mac_tbl_write(struct file *file, - const char __user *buffer, size_t count, - loff_t *data) -{ - rtk_hal_clear_table(); - - return count; -} - - -static ssize_t phyreg_ops(struct file *file, - const char __user *buffer, size_t count, - loff_t *data) -{ - char buf[64]; - unsigned int port; - unsigned int offset; - unsigned int val; - - memset(buf, 0, 64); - - if (copy_from_user(buf, buffer, count)) - return -EFAULT; - - - if(buf[0] == 'w') { - - if(sscanf(buf, "w %d %x %x", &port,&offset,&val) == -1) - return -EFAULT; - else - rtk_hal_set_phy_reg(port,offset,val); - - } else { - - if(sscanf(buf, "r %d %x",&port, &offset) == -1) - return -EFAULT; - else - rtk_hal_get_phy_reg(port,offset); - } - - return count; -} - -static ssize_t reg_ops(struct file *file, - const char __user *buffer, size_t count, - loff_t *data) -{ - char buf[64]; - unsigned int offset; - unsigned int val; - - memset(buf, 0, 64); - - if (copy_from_user(buf, buffer, count)) - return -EFAULT; - - - if(buf[0] == 'w') { - - if(sscanf(buf, "w %x %x", &offset,&val) == -1) - return -EFAULT; - else - rtk_hal_write_reg(offset,val); - - } else { - - if(sscanf(buf, "r %x", &offset) == -1) - return -EFAULT; - else - rtk_hal_read_reg(offset); - } - - return count; -} - -static ssize_t mirror_ops(struct file *file, - const char __user *buffer, size_t count, - loff_t *data) -{ - char buf[64]; - unsigned int port; - unsigned int tx_map,rx_map; - - memset(buf, 0, 64); - - if (copy_from_user(buf, buffer, count)) - return -EFAULT; - - if(sscanf(buf, "%d %x %x", &port,&rx_map,&tx_map) == -1) - return -EFAULT; - else - rtk_hal_set_port_mirror(port,rx_map,tx_map); - - return count; -} - - -static ssize_t igmp_ops(struct file *file, - const char __user *buffer, size_t count, - loff_t *data) -{ - char buf[8]; - unsigned int ops; - - if (copy_from_user(buf, buffer, count)) - return -EFAULT; - - if(sscanf(buf, "%d", &ops) == -1) - return -EFAULT; - - if(ops == 0) - rtk_hal_disable_igmpsnoop(); - else if (ops == 1) - rtk_hal_enable_igmpsnoop(0); - else //hw igmp - rtk_hal_enable_igmpsnoop(1); - - return count; -} - - -static int esw_cnt_read(struct seq_file *seq, void *v) -{ - rtk_hal_dump_mib(); - return 0; -} - -static int vlan_read(struct seq_file *seq, void *v) -{ - rtk_hal_dump_vlan(); - return 0; -} - -static int mac_tbl_read(struct seq_file *seq, void *v) -{ - rtk_hal_dump_table(); - return 0; -} - -static int reg_show(struct seq_file *seq, void *v) -{ - return 0; -} - -static int phyreg_show(struct seq_file *seq, void *v) -{ - return 0; -} - -static int mirror_show(struct seq_file *seq, void *v) -{ - return 0; -} - -static int igmp_show(struct seq_file *seq, void *v) -{ - return 0; -} - -static int switch_count_open(struct inode *inode, struct file *file) -{ - return single_open(file, esw_cnt_read, 0); -} - -static int switch_vlan_open(struct inode *inode, struct file *file) -{ - return single_open(file, vlan_read, 0); -} - -static int mac_tbl_open(struct inode *inode, struct file *file) -{ - return single_open(file, mac_tbl_read, 0); -} - -static int reg_open(struct inode *inode, struct file *file) -{ - return single_open(file, reg_show, 0); -} - -static int phyreg_open(struct inode *inode, struct file *file) -{ - return single_open(file, phyreg_show, 0); -} - -static int mirror_open(struct inode *inode, struct file *file) -{ - return single_open(file, mirror_show, 0); -} - -static int igmp_open(struct inode *inode, struct file *file) -{ - return single_open(file, igmp_show, 0); -} - - -static const struct file_operations switch_count_fops = { - .owner = THIS_MODULE, - .open = switch_count_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release -}; - -static const struct file_operations switch_vlan_fops = { - .owner = THIS_MODULE, - .open = switch_vlan_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release -}; - -static const struct file_operations mac_tbl_fops = { - .owner = THIS_MODULE, - .open = mac_tbl_open, - .read = seq_read, - .llseek = seq_lseek, - .write = mac_tbl_write, - .release = single_release -}; - -static const struct file_operations reg_fops = { - .owner = THIS_MODULE, - .open = reg_open, - .read = seq_read, - .llseek = seq_lseek, - .write = reg_ops, - .release = single_release -}; - -static const struct file_operations phyreg_fops = { - .owner = THIS_MODULE, - .open = phyreg_open, - .read = seq_read, - .llseek = seq_lseek, - .write = phyreg_ops, - .release = single_release -}; - -static const struct file_operations mirror_fops = { - .owner = THIS_MODULE, - .open = mirror_open, - .read = seq_read, - .llseek = seq_lseek, - .write = mirror_ops, - .release = single_release -}; - -static const struct file_operations igmp_fops = { - .owner = THIS_MODULE, - .open = igmp_open, - .read = seq_read, - .llseek = seq_lseek, - .write = igmp_ops, - .release = single_release -}; - -int gsw_debug_proc_init(void) -{ - - if (!proc_reg_dir) - proc_reg_dir = proc_mkdir(PROCREG_DIR, NULL); - - proc_esw_cnt = - proc_create(PROCREG_ESW_CNT, 0, proc_reg_dir, &switch_count_fops); - - if (!proc_esw_cnt) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_ESW_CNT); - - proc_vlan_cnt = - proc_create(PROCREG_VLAN, 0, proc_reg_dir, &switch_vlan_fops); - - if (!proc_vlan_cnt) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_VLAN); - - proc_mac_tbl = - proc_create(PROCREG_MAC_TBL, 0, proc_reg_dir, &mac_tbl_fops); - - if (!proc_mac_tbl) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_MAC_TBL); - - proc_reg = - proc_create(PROCREG_REG, 0, proc_reg_dir, ®_fops); - - if (!proc_reg) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_REG); - - proc_phyreg = - proc_create(PROCREG_PHYREG, 0, proc_reg_dir, &phyreg_fops); - - if (!proc_phyreg) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_PHYREG); - - proc_mirror = - proc_create(PROCREG_MIRROR, 0, proc_reg_dir, &mirror_fops); - - if (!proc_mirror) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_MIRROR); - - proc_igmp = - proc_create(PROCREG_IGMP, 0, proc_reg_dir, &igmp_fops); - - if (!proc_igmp) - pr_err("!! FAIL to create %s PROC !!\n", PROCREG_IGMP); - - return 0; -} - -void gsw_debug_proc_exit(void) -{ - if (proc_esw_cnt) - remove_proc_entry(PROCREG_ESW_CNT, proc_reg_dir); -} - - diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s_mdio.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s_mdio.c deleted file mode 100644 index ae958e8967..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367s_mdio.c +++ /dev/null @@ -1,312 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - - -#include "./rtl8367c/include/rtk_switch.h" -#include "./rtl8367c/include/port.h" -#include "./rtl8367c/include/vlan.h" -#include "./rtl8367c/include/rtl8367c_asicdrv_port.h" - -struct rtk_gsw { - struct device *dev; - struct mii_bus *bus; - int reset_pin; -}; - -static struct rtk_gsw *_gsw; - -extern int gsw_debug_proc_init(void); -extern void gsw_debug_proc_exit(void); - -#ifdef CONFIG_SWCONFIG -extern int rtl8367s_swconfig_init( void (*reset_func)(void) ); -#endif - -/*mii_mgr_read/mii_mgr_write is the callback API for rtl8367 driver*/ -unsigned int mii_mgr_read(unsigned int phy_addr,unsigned int phy_register,unsigned int *read_data) -{ - struct mii_bus *bus = _gsw->bus; - - mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - - *read_data = bus->read(bus, phy_addr, phy_register); - - mutex_unlock(&bus->mdio_lock); - - return 0; -} - -unsigned int mii_mgr_write(unsigned int phy_addr,unsigned int phy_register,unsigned int write_data) -{ - struct mii_bus *bus = _gsw->bus; - - mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); - - bus->write(bus, phy_addr, phy_register, write_data); - - mutex_unlock(&bus->mdio_lock); - - return 0; -} - -static int rtl8367s_hw_reset(void) -{ - struct rtk_gsw *gsw = _gsw; - int ret; - - if (gsw->reset_pin < 0) - return 0; - - ret = devm_gpio_request(gsw->dev, gsw->reset_pin, "mediatek,reset-pin"); - - if (ret) - printk("fail to devm_gpio_request\n"); - - gpio_direction_output(gsw->reset_pin, 0); - - usleep_range(1000, 1100); - - gpio_set_value(gsw->reset_pin, 1); - - mdelay(500); - - devm_gpio_free(gsw->dev, gsw->reset_pin); - - return 0; - -} - -static int rtl8367s_vlan_config(int want_at_p0) -{ - rtk_vlan_cfg_t vlan1, vlan2; - - /* Set LAN/WAN VLAN partition */ - memset(&vlan1, 0x00, sizeof(rtk_vlan_cfg_t)); - - RTK_PORTMASK_PORT_SET(vlan1.mbr, EXT_PORT0); - RTK_PORTMASK_PORT_SET(vlan1.mbr, UTP_PORT1); - RTK_PORTMASK_PORT_SET(vlan1.mbr, UTP_PORT2); - RTK_PORTMASK_PORT_SET(vlan1.mbr, UTP_PORT3); - RTK_PORTMASK_PORT_SET(vlan1.untag, EXT_PORT0); - RTK_PORTMASK_PORT_SET(vlan1.untag, UTP_PORT1); - RTK_PORTMASK_PORT_SET(vlan1.untag, UTP_PORT2); - RTK_PORTMASK_PORT_SET(vlan1.untag, UTP_PORT3); - - if (want_at_p0) { - RTK_PORTMASK_PORT_SET(vlan1.mbr, UTP_PORT4); - RTK_PORTMASK_PORT_SET(vlan1.untag, UTP_PORT4); - } else { - RTK_PORTMASK_PORT_SET(vlan1.mbr, UTP_PORT0); - RTK_PORTMASK_PORT_SET(vlan1.untag, UTP_PORT0); - } - - vlan1.ivl_en = 1; - - rtk_vlan_set(1, &vlan1); - - memset(&vlan2, 0x00, sizeof(rtk_vlan_cfg_t)); - - RTK_PORTMASK_PORT_SET(vlan2.mbr, EXT_PORT1); - RTK_PORTMASK_PORT_SET(vlan2.untag, EXT_PORT1); - - if (want_at_p0) { - RTK_PORTMASK_PORT_SET(vlan2.mbr, UTP_PORT0); - RTK_PORTMASK_PORT_SET(vlan2.untag, UTP_PORT0); - } else { - RTK_PORTMASK_PORT_SET(vlan2.mbr, UTP_PORT4); - RTK_PORTMASK_PORT_SET(vlan2.untag, UTP_PORT4); - } - - vlan2.ivl_en = 1; - rtk_vlan_set(2, &vlan2); - - rtk_vlan_portPvid_set(EXT_PORT0, 1, 0); - rtk_vlan_portPvid_set(UTP_PORT1, 1, 0); - rtk_vlan_portPvid_set(UTP_PORT2, 1, 0); - rtk_vlan_portPvid_set(UTP_PORT3, 1, 0); - rtk_vlan_portPvid_set(EXT_PORT1, 2, 0); - - if (want_at_p0) { - rtk_vlan_portPvid_set(UTP_PORT0, 2, 0); - rtk_vlan_portPvid_set(UTP_PORT4, 1, 0); - } else { - rtk_vlan_portPvid_set(UTP_PORT0, 1, 0); - rtk_vlan_portPvid_set(UTP_PORT4, 2, 0); - } - - return 0; -} - -static int rtl8367s_hw_init(void) -{ - - rtl8367s_hw_reset(); - - if(rtk_switch_init()) - return -1; - - mdelay(500); - - if (rtk_vlan_reset()) - return -1; - - if (rtk_vlan_init()) - return -1; - - return 0; -} - -static void set_rtl8367s_sgmii(void) -{ - rtk_port_mac_ability_t mac_cfg; - rtk_mode_ext_t mode; - - mode = MODE_EXT_HSGMII; - mac_cfg.forcemode = MAC_FORCE; - mac_cfg.speed = PORT_SPEED_2500M; - mac_cfg.duplex = PORT_FULL_DUPLEX; - mac_cfg.link = PORT_LINKUP; - mac_cfg.nway = DISABLED; - mac_cfg.txpause = ENABLED; - mac_cfg.rxpause = ENABLED; - rtk_port_macForceLinkExt_set(EXT_PORT0, mode, &mac_cfg); - rtk_port_sgmiiNway_set(EXT_PORT0, DISABLED); - rtk_port_phyEnableAll_set(ENABLED); - -} - -static void set_rtl8367s_rgmii(void) -{ - rtk_port_mac_ability_t mac_cfg; - rtk_mode_ext_t mode; - - mode = MODE_EXT_RGMII; - mac_cfg.forcemode = MAC_FORCE; - mac_cfg.speed = PORT_SPEED_1000M; - mac_cfg.duplex = PORT_FULL_DUPLEX; - mac_cfg.link = PORT_LINKUP; - mac_cfg.nway = DISABLED; - mac_cfg.txpause = ENABLED; - mac_cfg.rxpause = ENABLED; - rtk_port_macForceLinkExt_set(EXT_PORT1, mode, &mac_cfg); - rtk_port_rgmiiDelayExt_set(EXT_PORT1, 1, 3); - rtk_port_phyEnableAll_set(ENABLED); - -} - -void init_gsw(void) -{ - rtl8367s_hw_init(); - set_rtl8367s_sgmii(); - set_rtl8367s_rgmii(); -} - -// bleow are platform driver -static const struct of_device_id rtk_gsw_match[] = { - { .compatible = "mediatek,rtk-gsw" }, - {}, -}; - -MODULE_DEVICE_TABLE(of, rtk_gsw_match); - -static int rtk_gsw_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct device_node *mdio; - struct mii_bus *mdio_bus; - struct rtk_gsw *gsw; - const char *pm; - - mdio = of_parse_phandle(np, "mediatek,mdio", 0); - - if (!mdio) - return -EINVAL; - - mdio_bus = of_mdio_find_bus(mdio); - - if (!mdio_bus) - return -EPROBE_DEFER; - - gsw = devm_kzalloc(&pdev->dev, sizeof(struct rtk_gsw), GFP_KERNEL); - - if (!gsw) - return -ENOMEM; - - gsw->dev = &pdev->dev; - - gsw->bus = mdio_bus; - - gsw->reset_pin = of_get_named_gpio(np, "mediatek,reset-pin", 0); - - _gsw = gsw; - - init_gsw(); - - //init default vlan or init swocnfig - if(!of_property_read_string(pdev->dev.of_node, - "mediatek,port_map", &pm)) { - - if (!strcasecmp(pm, "wllll")) - rtl8367s_vlan_config(1); - else - rtl8367s_vlan_config(0); - - } else { -#ifdef CONFIG_SWCONFIG - rtl8367s_swconfig_init(&init_gsw); -#else - rtl8367s_vlan_config(0); -#endif - } - - gsw_debug_proc_init(); - - platform_set_drvdata(pdev, gsw); - - return 0; - -} - -static int rtk_gsw_remove(struct platform_device *pdev) -{ - platform_set_drvdata(pdev, NULL); - gsw_debug_proc_exit(); - - return 0; -} - -static struct platform_driver gsw_driver = { - .probe = rtk_gsw_probe, - .remove = rtk_gsw_remove, - .driver = { - .name = "rtk-gsw", - .owner = THIS_MODULE, - .of_match_table = rtk_gsw_match, - }, -}; - -module_platform_driver(gsw_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mark Lee "); -MODULE_DESCRIPTION("rtl8367c switch driver for MT7622"); - diff --git a/target/linux/mediatek/patches-5.4/0001-v5.7-spi-make-spi-max-frequency-optional.patch b/target/linux/mediatek/patches-5.4/0001-v5.7-spi-make-spi-max-frequency-optional.patch deleted file mode 100644 index 79ce15c37b..0000000000 --- a/target/linux/mediatek/patches-5.4/0001-v5.7-spi-make-spi-max-frequency-optional.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 671c3bf50ae498dc12aef6c70abe5cfa066b1348 Mon Sep 17 00:00:00 2001 -From: Chuanhong Guo -Date: Fri, 6 Mar 2020 16:50:49 +0800 -Subject: [PATCH 1/2] spi: make spi-max-frequency optional - -We only need a spi-max-frequency when we specifically request a -spi frequency lower than the max speed of spi host. -This property is already documented as optional property and current -host drivers are implemented to operate at highest speed possible -when spi->max_speed_hz is 0. -This patch makes spi-max-frequency an optional property so that -we could just omit it to use max controller speed. - -Signed-off-by: Chuanhong Guo -Link: https://lore.kernel.org/r/20200306085052.28258-2-gch981213@gmail.com -Signed-off-by: Mark Brown ---- - drivers/spi/spi.c | 9 ++------- - 1 file changed, 2 insertions(+), 7 deletions(-) - ---- a/drivers/spi/spi.c -+++ b/drivers/spi/spi.c -@@ -1809,13 +1809,8 @@ static int of_spi_parse_dt(struct spi_co - spi->mode |= SPI_CS_HIGH; - - /* Device speed */ -- rc = of_property_read_u32(nc, "spi-max-frequency", &value); -- if (rc) { -- dev_err(&ctlr->dev, -- "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc); -- return rc; -- } -- spi->max_speed_hz = value; -+ if (!of_property_read_u32(nc, "spi-max-frequency", &value)) -+ spi->max_speed_hz = value; - - return 0; - } diff --git a/target/linux/mediatek/patches-5.4/0002-v5.7-spi-add-support-for-mediatek-spi-nor-controller.patch b/target/linux/mediatek/patches-5.4/0002-v5.7-spi-add-support-for-mediatek-spi-nor-controller.patch deleted file mode 100644 index 0a63bdddaf..0000000000 --- a/target/linux/mediatek/patches-5.4/0002-v5.7-spi-add-support-for-mediatek-spi-nor-controller.patch +++ /dev/null @@ -1,761 +0,0 @@ -From 881d1ee9fe81ff2be1b90809a07621be97404a57 Mon Sep 17 00:00:00 2001 -From: Chuanhong Guo -Date: Fri, 6 Mar 2020 16:50:50 +0800 -Subject: [PATCH 2/2] spi: add support for mediatek spi-nor controller - -This is a driver for mtk spi-nor controller using spi-mem interface. -The same controller already has limited support provided by mtk-quadspi -driver under spi-nor framework and this new driver is a replacement -for the old one. - -Comparing to the old driver, this driver has following advantages: -1. It can handle any full-duplex spi transfer up to 6 bytes, and - this is implemented using generic spi interface. -2. It take account into command opcode properly. The reading routine - in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 - transfers, but old driver doesn't implement this properly. This - driver checks supported opcode explicitly and use (1) to perform - unmatched operations. -3. It properly handles SFDP reading. Old driver can't read SFDP - due to the bug mentioned in (2). -4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops - requires parsing SFDP, which isn't possible in old driver. And - the old driver is only flagged to support 1-1-2 mode. -5. It takes advantage of the DMA feature in this controller for - long reads and supports IRQ on DMA requests to free cpu cycles - from polling status registers on long DMA reading. It achieves - up to 17.5MB/s reading speed (1-4-4 mode) which is way faster - than the old one. IRQ is implemented as optional to maintain - backward compatibility. - -Signed-off-by: Chuanhong Guo -Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com -Signed-off-by: Mark Brown ---- - drivers/spi/Kconfig | 10 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-mtk-nor.c | 689 ++++++++++++++++++++++++++++++++++++++ - 3 files changed, 700 insertions(+) - create mode 100644 drivers/spi/spi-mtk-nor.c - ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -433,6 +433,16 @@ config SPI_MT7621 - help - This selects a driver for the MediaTek MT7621 SPI Controller. - -+config SPI_MTK_NOR -+ tristate "MediaTek SPI NOR controller" -+ depends on ARCH_MEDIATEK || COMPILE_TEST -+ help -+ This enables support for SPI NOR controller found on MediaTek -+ ARM SoCs. This is a controller specifically for SPI-NOR flash. -+ It can perform generic SPI transfers up to 6 bytes via generic -+ SPI interface as well as several SPI-NOR specific instructions -+ via SPI MEM interface. -+ - config SPI_NPCM_FIU - tristate "Nuvoton NPCM FLASH Interface Unit" - depends on ARCH_NPCM || COMPILE_TEST ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -61,6 +61,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mp - obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o - obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o - obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o -+obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o - obj-$(CONFIG_SPI_MXIC) += spi-mxic.o - obj-$(CONFIG_SPI_MXS) += spi-mxs.o - obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o ---- /dev/null -+++ b/drivers/spi/spi-mtk-nor.c -@@ -0,0 +1,689 @@ -+// SPDX-License-Identifier: GPL-2.0 -+// -+// Mediatek SPI NOR controller driver -+// -+// Copyright (C) 2020 Chuanhong Guo -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "mtk-spi-nor" -+ -+#define MTK_NOR_REG_CMD 0x00 -+#define MTK_NOR_CMD_WRITE BIT(4) -+#define MTK_NOR_CMD_PROGRAM BIT(2) -+#define MTK_NOR_CMD_READ BIT(0) -+#define MTK_NOR_CMD_MASK GENMASK(5, 0) -+ -+#define MTK_NOR_REG_PRG_CNT 0x04 -+#define MTK_NOR_REG_RDATA 0x0c -+ -+#define MTK_NOR_REG_RADR0 0x10 -+#define MTK_NOR_REG_RADR(n) (MTK_NOR_REG_RADR0 + 4 * (n)) -+#define MTK_NOR_REG_RADR3 0xc8 -+ -+#define MTK_NOR_REG_WDATA 0x1c -+ -+#define MTK_NOR_REG_PRGDATA0 0x20 -+#define MTK_NOR_REG_PRGDATA(n) (MTK_NOR_REG_PRGDATA0 + 4 * (n)) -+#define MTK_NOR_REG_PRGDATA_MAX 5 -+ -+#define MTK_NOR_REG_SHIFT0 0x38 -+#define MTK_NOR_REG_SHIFT(n) (MTK_NOR_REG_SHIFT0 + 4 * (n)) -+#define MTK_NOR_REG_SHIFT_MAX 9 -+ -+#define MTK_NOR_REG_CFG1 0x60 -+#define MTK_NOR_FAST_READ BIT(0) -+ -+#define MTK_NOR_REG_CFG2 0x64 -+#define MTK_NOR_WR_CUSTOM_OP_EN BIT(4) -+#define MTK_NOR_WR_BUF_EN BIT(0) -+ -+#define MTK_NOR_REG_PP_DATA 0x98 -+ -+#define MTK_NOR_REG_IRQ_STAT 0xa8 -+#define MTK_NOR_REG_IRQ_EN 0xac -+#define MTK_NOR_IRQ_DMA BIT(7) -+#define MTK_NOR_IRQ_MASK GENMASK(7, 0) -+ -+#define MTK_NOR_REG_CFG3 0xb4 -+#define MTK_NOR_DISABLE_WREN BIT(7) -+#define MTK_NOR_DISABLE_SR_POLL BIT(5) -+ -+#define MTK_NOR_REG_WP 0xc4 -+#define MTK_NOR_ENABLE_SF_CMD 0x30 -+ -+#define MTK_NOR_REG_BUSCFG 0xcc -+#define MTK_NOR_4B_ADDR BIT(4) -+#define MTK_NOR_QUAD_ADDR BIT(3) -+#define MTK_NOR_QUAD_READ BIT(2) -+#define MTK_NOR_DUAL_ADDR BIT(1) -+#define MTK_NOR_DUAL_READ BIT(0) -+#define MTK_NOR_BUS_MODE_MASK GENMASK(4, 0) -+ -+#define MTK_NOR_REG_DMA_CTL 0x718 -+#define MTK_NOR_DMA_START BIT(0) -+ -+#define MTK_NOR_REG_DMA_FADR 0x71c -+#define MTK_NOR_REG_DMA_DADR 0x720 -+#define MTK_NOR_REG_DMA_END_DADR 0x724 -+ -+#define MTK_NOR_PRG_MAX_SIZE 6 -+// Reading DMA src/dst addresses have to be 16-byte aligned -+#define MTK_NOR_DMA_ALIGN 16 -+#define MTK_NOR_DMA_ALIGN_MASK (MTK_NOR_DMA_ALIGN - 1) -+// and we allocate a bounce buffer if destination address isn't aligned. -+#define MTK_NOR_BOUNCE_BUF_SIZE PAGE_SIZE -+ -+// Buffered page program can do one 128-byte transfer -+#define MTK_NOR_PP_SIZE 128 -+ -+#define CLK_TO_US(sp, clkcnt) ((clkcnt) * 1000000 / sp->spi_freq) -+ -+struct mtk_nor { -+ struct spi_controller *ctlr; -+ struct device *dev; -+ void __iomem *base; -+ u8 *buffer; -+ struct clk *spi_clk; -+ struct clk *ctlr_clk; -+ unsigned int spi_freq; -+ bool wbuf_en; -+ bool has_irq; -+ struct completion op_done; -+}; -+ -+static inline void mtk_nor_rmw(struct mtk_nor *sp, u32 reg, u32 set, u32 clr) -+{ -+ u32 val = readl(sp->base + reg); -+ -+ val &= ~clr; -+ val |= set; -+ writel(val, sp->base + reg); -+} -+ -+static inline int mtk_nor_cmd_exec(struct mtk_nor *sp, u32 cmd, ulong clk) -+{ -+ ulong delay = CLK_TO_US(sp, clk); -+ u32 reg; -+ int ret; -+ -+ writel(cmd, sp->base + MTK_NOR_REG_CMD); -+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CMD, reg, !(reg & cmd), -+ delay / 3, (delay + 1) * 200); -+ if (ret < 0) -+ dev_err(sp->dev, "command %u timeout.\n", cmd); -+ return ret; -+} -+ -+static void mtk_nor_set_addr(struct mtk_nor *sp, const struct spi_mem_op *op) -+{ -+ u32 addr = op->addr.val; -+ int i; -+ -+ for (i = 0; i < 3; i++) { -+ writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR(i)); -+ addr >>= 8; -+ } -+ if (op->addr.nbytes == 4) { -+ writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR3); -+ mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, MTK_NOR_4B_ADDR, 0); -+ } else { -+ mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, 0, MTK_NOR_4B_ADDR); -+ } -+} -+ -+static bool mtk_nor_match_read(const struct spi_mem_op *op) -+{ -+ int dummy = 0; -+ -+ if (op->dummy.buswidth) -+ dummy = op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth; -+ -+ if ((op->data.buswidth == 2) || (op->data.buswidth == 4)) { -+ if (op->addr.buswidth == 1) -+ return dummy == 8; -+ else if (op->addr.buswidth == 2) -+ return dummy == 4; -+ else if (op->addr.buswidth == 4) -+ return dummy == 6; -+ } else if ((op->addr.buswidth == 1) && (op->data.buswidth == 1)) { -+ if (op->cmd.opcode == 0x03) -+ return dummy == 0; -+ else if (op->cmd.opcode == 0x0b) -+ return dummy == 8; -+ } -+ return false; -+} -+ -+static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) -+{ -+ size_t len; -+ -+ if (!op->data.nbytes) -+ return 0; -+ -+ if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) { -+ if ((op->data.dir == SPI_MEM_DATA_IN) && -+ mtk_nor_match_read(op)) { -+ if ((op->addr.val & MTK_NOR_DMA_ALIGN_MASK) || -+ (op->data.nbytes < MTK_NOR_DMA_ALIGN)) -+ op->data.nbytes = 1; -+ else if (!((ulong)(op->data.buf.in) & -+ MTK_NOR_DMA_ALIGN_MASK)) -+ op->data.nbytes &= ~MTK_NOR_DMA_ALIGN_MASK; -+ else if (op->data.nbytes > MTK_NOR_BOUNCE_BUF_SIZE) -+ op->data.nbytes = MTK_NOR_BOUNCE_BUF_SIZE; -+ return 0; -+ } else if (op->data.dir == SPI_MEM_DATA_OUT) { -+ if (op->data.nbytes >= MTK_NOR_PP_SIZE) -+ op->data.nbytes = MTK_NOR_PP_SIZE; -+ else -+ op->data.nbytes = 1; -+ return 0; -+ } -+ } -+ -+ len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes - -+ op->dummy.nbytes; -+ if (op->data.nbytes > len) -+ op->data.nbytes = len; -+ -+ return 0; -+} -+ -+static bool mtk_nor_supports_op(struct spi_mem *mem, -+ const struct spi_mem_op *op) -+{ -+ size_t len; -+ -+ if (op->cmd.buswidth != 1) -+ return false; -+ -+ if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) { -+ if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) -+ return true; -+ else if (op->data.dir == SPI_MEM_DATA_OUT) -+ return (op->addr.buswidth == 1) && -+ (op->dummy.buswidth == 0) && -+ (op->data.buswidth == 1); -+ } -+ len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; -+ if ((len > MTK_NOR_PRG_MAX_SIZE) || -+ ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE))) -+ return false; -+ return true; -+} -+ -+static void mtk_nor_setup_bus(struct mtk_nor *sp, const struct spi_mem_op *op) -+{ -+ u32 reg = 0; -+ -+ if (op->addr.nbytes == 4) -+ reg |= MTK_NOR_4B_ADDR; -+ -+ if (op->data.buswidth == 4) { -+ reg |= MTK_NOR_QUAD_READ; -+ writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(4)); -+ if (op->addr.buswidth == 4) -+ reg |= MTK_NOR_QUAD_ADDR; -+ } else if (op->data.buswidth == 2) { -+ reg |= MTK_NOR_DUAL_READ; -+ writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(3)); -+ if (op->addr.buswidth == 2) -+ reg |= MTK_NOR_DUAL_ADDR; -+ } else { -+ if (op->cmd.opcode == 0x0b) -+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, MTK_NOR_FAST_READ, 0); -+ else -+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, 0, MTK_NOR_FAST_READ); -+ } -+ mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, reg, MTK_NOR_BUS_MODE_MASK); -+} -+ -+static int mtk_nor_read_dma(struct mtk_nor *sp, u32 from, unsigned int length, -+ u8 *buffer) -+{ -+ int ret = 0; -+ ulong delay; -+ u32 reg; -+ dma_addr_t dma_addr; -+ -+ dma_addr = dma_map_single(sp->dev, buffer, length, DMA_FROM_DEVICE); -+ if (dma_mapping_error(sp->dev, dma_addr)) { -+ dev_err(sp->dev, "failed to map dma buffer.\n"); -+ return -EINVAL; -+ } -+ -+ writel(from, sp->base + MTK_NOR_REG_DMA_FADR); -+ writel(dma_addr, sp->base + MTK_NOR_REG_DMA_DADR); -+ writel(dma_addr + length, sp->base + MTK_NOR_REG_DMA_END_DADR); -+ -+ if (sp->has_irq) { -+ reinit_completion(&sp->op_done); -+ mtk_nor_rmw(sp, MTK_NOR_REG_IRQ_EN, MTK_NOR_IRQ_DMA, 0); -+ } -+ -+ mtk_nor_rmw(sp, MTK_NOR_REG_DMA_CTL, MTK_NOR_DMA_START, 0); -+ -+ delay = CLK_TO_US(sp, (length + 5) * BITS_PER_BYTE); -+ -+ if (sp->has_irq) { -+ if (!wait_for_completion_timeout(&sp->op_done, -+ (delay + 1) * 100)) -+ ret = -ETIMEDOUT; -+ } else { -+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_DMA_CTL, reg, -+ !(reg & MTK_NOR_DMA_START), delay / 3, -+ (delay + 1) * 100); -+ } -+ -+ dma_unmap_single(sp->dev, dma_addr, length, DMA_FROM_DEVICE); -+ if (ret < 0) -+ dev_err(sp->dev, "dma read timeout.\n"); -+ -+ return ret; -+} -+ -+static int mtk_nor_read_bounce(struct mtk_nor *sp, u32 from, -+ unsigned int length, u8 *buffer) -+{ -+ unsigned int rdlen; -+ int ret; -+ -+ if (length & MTK_NOR_DMA_ALIGN_MASK) -+ rdlen = (length + MTK_NOR_DMA_ALIGN) & ~MTK_NOR_DMA_ALIGN_MASK; -+ else -+ rdlen = length; -+ -+ ret = mtk_nor_read_dma(sp, from, rdlen, sp->buffer); -+ if (ret) -+ return ret; -+ -+ memcpy(buffer, sp->buffer, length); -+ return 0; -+} -+ -+static int mtk_nor_read_pio(struct mtk_nor *sp, const struct spi_mem_op *op) -+{ -+ u8 *buf = op->data.buf.in; -+ int ret; -+ -+ ret = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_READ, 6 * BITS_PER_BYTE); -+ if (!ret) -+ buf[0] = readb(sp->base + MTK_NOR_REG_RDATA); -+ return ret; -+} -+ -+static int mtk_nor_write_buffer_enable(struct mtk_nor *sp) -+{ -+ int ret; -+ u32 val; -+ -+ if (sp->wbuf_en) -+ return 0; -+ -+ val = readl(sp->base + MTK_NOR_REG_CFG2); -+ writel(val | MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); -+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, -+ val & MTK_NOR_WR_BUF_EN, 0, 10000); -+ if (!ret) -+ sp->wbuf_en = true; -+ return ret; -+} -+ -+static int mtk_nor_write_buffer_disable(struct mtk_nor *sp) -+{ -+ int ret; -+ u32 val; -+ -+ if (!sp->wbuf_en) -+ return 0; -+ val = readl(sp->base + MTK_NOR_REG_CFG2); -+ writel(val & ~MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2); -+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val, -+ !(val & MTK_NOR_WR_BUF_EN), 0, 10000); -+ if (!ret) -+ sp->wbuf_en = false; -+ return ret; -+} -+ -+static int mtk_nor_pp_buffered(struct mtk_nor *sp, const struct spi_mem_op *op) -+{ -+ const u8 *buf = op->data.buf.out; -+ u32 val; -+ int ret, i; -+ -+ ret = mtk_nor_write_buffer_enable(sp); -+ if (ret < 0) -+ return ret; -+ -+ for (i = 0; i < op->data.nbytes; i += 4) { -+ val = buf[i + 3] << 24 | buf[i + 2] << 16 | buf[i + 1] << 8 | -+ buf[i]; -+ writel(val, sp->base + MTK_NOR_REG_PP_DATA); -+ } -+ return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, -+ (op->data.nbytes + 5) * BITS_PER_BYTE); -+} -+ -+static int mtk_nor_pp_unbuffered(struct mtk_nor *sp, -+ const struct spi_mem_op *op) -+{ -+ const u8 *buf = op->data.buf.out; -+ int ret; -+ -+ ret = mtk_nor_write_buffer_disable(sp); -+ if (ret < 0) -+ return ret; -+ writeb(buf[0], sp->base + MTK_NOR_REG_WDATA); -+ return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, 6 * BITS_PER_BYTE); -+} -+ -+int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) -+{ -+ struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master); -+ int ret; -+ -+ if ((op->data.nbytes == 0) || -+ ((op->addr.nbytes != 3) && (op->addr.nbytes != 4))) -+ return -ENOTSUPP; -+ -+ if (op->data.dir == SPI_MEM_DATA_OUT) { -+ mtk_nor_set_addr(sp, op); -+ writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA0); -+ if (op->data.nbytes == MTK_NOR_PP_SIZE) -+ return mtk_nor_pp_buffered(sp, op); -+ return mtk_nor_pp_unbuffered(sp, op); -+ } -+ -+ if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) { -+ ret = mtk_nor_write_buffer_disable(sp); -+ if (ret < 0) -+ return ret; -+ mtk_nor_setup_bus(sp, op); -+ if (op->data.nbytes == 1) { -+ mtk_nor_set_addr(sp, op); -+ return mtk_nor_read_pio(sp, op); -+ } else if (((ulong)(op->data.buf.in) & -+ MTK_NOR_DMA_ALIGN_MASK)) { -+ return mtk_nor_read_bounce(sp, op->addr.val, -+ op->data.nbytes, -+ op->data.buf.in); -+ } else { -+ return mtk_nor_read_dma(sp, op->addr.val, -+ op->data.nbytes, -+ op->data.buf.in); -+ } -+ } -+ -+ return -ENOTSUPP; -+} -+ -+static int mtk_nor_setup(struct spi_device *spi) -+{ -+ struct mtk_nor *sp = spi_controller_get_devdata(spi->master); -+ -+ if (spi->max_speed_hz && (spi->max_speed_hz < sp->spi_freq)) { -+ dev_err(&spi->dev, "spi clock should be %u Hz.\n", -+ sp->spi_freq); -+ return -EINVAL; -+ } -+ spi->max_speed_hz = sp->spi_freq; -+ -+ return 0; -+} -+ -+static int mtk_nor_transfer_one_message(struct spi_controller *master, -+ struct spi_message *m) -+{ -+ struct mtk_nor *sp = spi_controller_get_devdata(master); -+ struct spi_transfer *t = NULL; -+ unsigned long trx_len = 0; -+ int stat = 0; -+ int reg_offset = MTK_NOR_REG_PRGDATA_MAX; -+ void __iomem *reg; -+ const u8 *txbuf; -+ u8 *rxbuf; -+ int i; -+ -+ list_for_each_entry(t, &m->transfers, transfer_list) { -+ txbuf = t->tx_buf; -+ for (i = 0; i < t->len; i++, reg_offset--) { -+ reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset); -+ if (txbuf) -+ writeb(txbuf[i], reg); -+ else -+ writeb(0, reg); -+ } -+ trx_len += t->len; -+ } -+ -+ writel(trx_len * BITS_PER_BYTE, sp->base + MTK_NOR_REG_PRG_CNT); -+ -+ stat = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_PROGRAM, -+ trx_len * BITS_PER_BYTE); -+ if (stat < 0) -+ goto msg_done; -+ -+ reg_offset = trx_len - 1; -+ list_for_each_entry(t, &m->transfers, transfer_list) { -+ rxbuf = t->rx_buf; -+ for (i = 0; i < t->len; i++, reg_offset--) { -+ reg = sp->base + MTK_NOR_REG_SHIFT(reg_offset); -+ if (rxbuf) -+ rxbuf[i] = readb(reg); -+ } -+ } -+ -+ m->actual_length = trx_len; -+msg_done: -+ m->status = stat; -+ spi_finalize_current_message(master); -+ -+ return 0; -+} -+ -+static void mtk_nor_disable_clk(struct mtk_nor *sp) -+{ -+ clk_disable_unprepare(sp->spi_clk); -+ clk_disable_unprepare(sp->ctlr_clk); -+} -+ -+static int mtk_nor_enable_clk(struct mtk_nor *sp) -+{ -+ int ret; -+ -+ ret = clk_prepare_enable(sp->spi_clk); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(sp->ctlr_clk); -+ if (ret) { -+ clk_disable_unprepare(sp->spi_clk); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int mtk_nor_init(struct mtk_nor *sp) -+{ -+ int ret; -+ -+ ret = mtk_nor_enable_clk(sp); -+ if (ret) -+ return ret; -+ -+ sp->spi_freq = clk_get_rate(sp->spi_clk); -+ -+ writel(MTK_NOR_ENABLE_SF_CMD, sp->base + MTK_NOR_REG_WP); -+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG2, MTK_NOR_WR_CUSTOM_OP_EN, 0); -+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG3, -+ MTK_NOR_DISABLE_WREN | MTK_NOR_DISABLE_SR_POLL, 0); -+ -+ return ret; -+} -+ -+static irqreturn_t mtk_nor_irq_handler(int irq, void *data) -+{ -+ struct mtk_nor *sp = data; -+ u32 irq_status, irq_enabled; -+ -+ irq_status = readl(sp->base + MTK_NOR_REG_IRQ_STAT); -+ irq_enabled = readl(sp->base + MTK_NOR_REG_IRQ_EN); -+ // write status back to clear interrupt -+ writel(irq_status, sp->base + MTK_NOR_REG_IRQ_STAT); -+ -+ if (!(irq_status & irq_enabled)) -+ return IRQ_NONE; -+ -+ if (irq_status & MTK_NOR_IRQ_DMA) { -+ complete(&sp->op_done); -+ writel(0, sp->base + MTK_NOR_REG_IRQ_EN); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+static size_t mtk_max_msg_size(struct spi_device *spi) -+{ -+ return MTK_NOR_PRG_MAX_SIZE; -+} -+ -+static const struct spi_controller_mem_ops mtk_nor_mem_ops = { -+ .adjust_op_size = mtk_nor_adjust_op_size, -+ .supports_op = mtk_nor_supports_op, -+ .exec_op = mtk_nor_exec_op -+}; -+ -+static const struct of_device_id mtk_nor_match[] = { -+ { .compatible = "mediatek,mt8173-nor" }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, mtk_nor_match); -+ -+static int mtk_nor_probe(struct platform_device *pdev) -+{ -+ struct spi_controller *ctlr; -+ struct mtk_nor *sp; -+ void __iomem *base; -+ u8 *buffer; -+ struct clk *spi_clk, *ctlr_clk; -+ int ret, irq; -+ -+ base = devm_platform_ioremap_resource(pdev, 0); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ spi_clk = devm_clk_get(&pdev->dev, "spi"); -+ if (IS_ERR(spi_clk)) -+ return PTR_ERR(spi_clk); -+ -+ ctlr_clk = devm_clk_get(&pdev->dev, "sf"); -+ if (IS_ERR(ctlr_clk)) -+ return PTR_ERR(ctlr_clk); -+ -+ buffer = devm_kmalloc(&pdev->dev, -+ MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN, -+ GFP_KERNEL); -+ if (!buffer) -+ return -ENOMEM; -+ -+ if ((ulong)buffer & MTK_NOR_DMA_ALIGN_MASK) -+ buffer = (u8 *)(((ulong)buffer + MTK_NOR_DMA_ALIGN) & -+ ~MTK_NOR_DMA_ALIGN_MASK); -+ -+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*sp)); -+ if (!ctlr) { -+ dev_err(&pdev->dev, "failed to allocate spi controller\n"); -+ return -ENOMEM; -+ } -+ -+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8); -+ ctlr->dev.of_node = pdev->dev.of_node; -+ ctlr->max_message_size = mtk_max_msg_size; -+ ctlr->mem_ops = &mtk_nor_mem_ops; -+ ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD; -+ ctlr->num_chipselect = 1; -+ ctlr->setup = mtk_nor_setup; -+ ctlr->transfer_one_message = mtk_nor_transfer_one_message; -+ -+ dev_set_drvdata(&pdev->dev, ctlr); -+ -+ sp = spi_controller_get_devdata(ctlr); -+ sp->base = base; -+ sp->buffer = buffer; -+ sp->has_irq = false; -+ sp->wbuf_en = false; -+ sp->ctlr = ctlr; -+ sp->dev = &pdev->dev; -+ sp->spi_clk = spi_clk; -+ sp->ctlr_clk = ctlr_clk; -+ -+ irq = platform_get_irq_optional(pdev, 0); -+ if (irq < 0) { -+ dev_warn(sp->dev, "IRQ not available."); -+ } else { -+ writel(MTK_NOR_IRQ_MASK, base + MTK_NOR_REG_IRQ_STAT); -+ writel(0, base + MTK_NOR_REG_IRQ_EN); -+ ret = devm_request_irq(sp->dev, irq, mtk_nor_irq_handler, 0, -+ pdev->name, sp); -+ if (ret < 0) { -+ dev_warn(sp->dev, "failed to request IRQ."); -+ } else { -+ init_completion(&sp->op_done); -+ sp->has_irq = true; -+ } -+ } -+ -+ ret = mtk_nor_init(sp); -+ if (ret < 0) { -+ kfree(ctlr); -+ return ret; -+ } -+ -+ dev_info(&pdev->dev, "spi frequency: %d Hz\n", sp->spi_freq); -+ -+ return devm_spi_register_controller(&pdev->dev, ctlr); -+} -+ -+static int mtk_nor_remove(struct platform_device *pdev) -+{ -+ struct spi_controller *ctlr; -+ struct mtk_nor *sp; -+ -+ ctlr = dev_get_drvdata(&pdev->dev); -+ sp = spi_controller_get_devdata(ctlr); -+ -+ mtk_nor_disable_clk(sp); -+ -+ return 0; -+} -+ -+static struct platform_driver mtk_nor_driver = { -+ .driver = { -+ .name = DRIVER_NAME, -+ .of_match_table = mtk_nor_match, -+ }, -+ .probe = mtk_nor_probe, -+ .remove = mtk_nor_remove, -+}; -+ -+module_platform_driver(mtk_nor_driver); -+ -+MODULE_DESCRIPTION("Mediatek SPI NOR controller driver"); -+MODULE_AUTHOR("Chuanhong Guo "); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch b/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch deleted file mode 100644 index 6fae99c1f4..0000000000 --- a/target/linux/mediatek/patches-5.4/0003-switch-add-mt7531.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -329,6 +329,8 @@ config RTL8367B_PHY - - endif # RTL8366_SMI - -+source "drivers/net/phy/mtk/mt753x/Kconfig" -+ - comment "MII PHY device drivers" - - config SFP ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -109,3 +109,5 @@ obj-$(CONFIG_STE10XP) += ste10Xp.o - obj-$(CONFIG_TERANETICS_PHY) += teranetics.o - obj-$(CONFIG_VITESSE_PHY) += vitesse.o - obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o -+obj-$(CONFIG_MT753X_GSW) += mtk/mt753x/ -+ diff --git a/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch b/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch deleted file mode 100644 index d40cbfb853..0000000000 --- a/target/linux/mediatek/patches-5.4/0005-dts-mt7622-add-gsw.patch +++ /dev/null @@ -1,258 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -53,6 +53,13 @@ - }; - }; - -+ gsw: gsw@0 { -+ compatible = "mediatek,mt753x"; -+ mediatek,ethsys = <ðsys>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - leds { - compatible = "gpio-leds"; - -@@ -146,6 +153,36 @@ - }; - }; - -+&gsw { -+ mediatek,mdio = <&mdio>; -+ mediatek,portmap = "wllll"; -+ mediatek,mdio_master_pinmux = <0>; -+ reset-gpios = <&pio 54 0>; -+ interrupt-parent = <&pio>; -+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; -+ status = "okay"; -+ -+ port5: port@5 { -+ compatible = "mediatek,mt753x-port"; -+ reg = <5>; -+ phy-mode = "rgmii"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port6: port@6 { -+ compatible = "mediatek,mt753x-port"; -+ reg = <6>; -+ phy-mode = "sgmii"; -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ }; -+ }; -+}; -+ - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -1,7 +1,6 @@ - /* -- * Copyright (c) 2017 MediaTek Inc. -- * Author: Ming Huang -- * Sean Wang -+ * Copyright (c) 2018 MediaTek Inc. -+ * Author: Ryder Lee - * - * SPDX-License-Identifier: (GPL-2.0 OR MIT) - */ -@@ -14,7 +13,7 @@ - #include "mt6380.dtsi" - - / { -- model = "MediaTek MT7622 RFB1 board"; -+ model = "MT7622_MT7531 RFB"; - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; - - aliases { -@@ -23,7 +22,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512"; -+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; - }; - - cpus { -@@ -40,23 +39,36 @@ - - gpio-keys { - compatible = "gpio-keys"; -- poll-interval = <100>; - - factory { - label = "factory"; - linux,code = ; -- gpios = <&pio 0 0>; -+ gpios = <&pio 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "wps"; - linux,code = ; -- gpios = <&pio 102 0>; -+ gpios = <&pio 102 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ green { -+ label = "bpi-r64:pio:green"; -+ gpios = <&pio 89 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ red { -+ label = "bpi-r64:pio:red"; -+ gpios = <&pio 88 GPIO_ACTIVE_HIGH>; - }; - }; - - memory { -- reg = <0 0x40000000 0 0x20000000>; -+ reg = <0 0x40000000 0 0x40000000>; - }; - - reg_1p8v: regulator-1p8v { -@@ -101,23 +113,82 @@ - }; - - ð { -- pinctrl-names = "default"; -- pinctrl-0 = <ð_pins>; - status = "okay"; -+ gmac0: mac@0 { -+ compatible = "mediatek,eth-mac"; -+ reg = <0>; -+ phy-mode = "2500base-x"; -+ -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ pause; -+ }; -+ }; - - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; -- phy-handle = <&phy5>; -+ phy-mode = "rgmii"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ }; - }; - -- mdio-bus { -+ mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; - -- phy5: ethernet-phy@5 { -- reg = <5>; -- phy-mode = "sgmii"; -+ switch@0 { -+ compatible = "mediatek,mt7531"; -+ reg = <0>; -+ reset-gpios = <&pio 54 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan1"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan2"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan3"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan4"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "wan"; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ phy-mode = "2500base-x"; -+ -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ pause; -+ }; -+ }; -+ }; - }; - }; - }; -@@ -185,15 +256,28 @@ - - &pcie { - pinctrl-names = "default"; -- pinctrl-0 = <&pcie0_pins>; -+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; - status = "okay"; - - pcie@0,0 { - status = "okay"; - }; -+ -+ pcie@1,0 { -+ status = "okay"; -+ }; - }; - - &pio { -+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and -+ * SATA functions. i.e. output-high: PCIe, output-low: SATA -+ */ -+ asm_sel { -+ gpio-hog; -+ gpios = <90 GPIO_ACTIVE_HIGH>; -+ output-high; -+ }; -+ - /* eMMC is shared pin with parallel NAND */ - emmc_pins_default: emmc-pins-default { - mux { -@@ -460,11 +544,11 @@ - }; - - &sata { -- status = "okay"; -+ status = "disable"; - }; - - &sata_phy { -- status = "okay"; -+ status = "disable"; - }; - - &spi0 { diff --git a/target/linux/mediatek/patches-5.4/0005-dts-mt7629-add-gsw.patch b/target/linux/mediatek/patches-5.4/0005-dts-mt7629-add-gsw.patch deleted file mode 100644 index 4028bad4df..0000000000 --- a/target/linux/mediatek/patches-5.4/0005-dts-mt7629-add-gsw.patch +++ /dev/null @@ -1,90 +0,0 @@ ---- a/arch/arm/boot/dts/mt7629-rfb.dts -+++ b/arch/arm/boot/dts/mt7629-rfb.dts -@@ -18,6 +18,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8"; - }; - - gpio-keys { -@@ -36,6 +37,13 @@ - }; - }; - -+ gsw: gsw@0 { -+ compatible = "mediatek,mt753x"; -+ mediatek,ethsys = <ðsys>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x10000000>; -@@ -70,6 +78,10 @@ - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "2500base-x"; -+ -+ nvmem-cells = <&macaddr_factory_2a>; -+ nvmem-cell-names = "mac-address"; -+ - fixed-link { - speed = <2500>; - full-duplex; -@@ -82,6 +94,9 @@ - reg = <1>; - phy-mode = "gmii"; - phy-handle = <&phy0>; -+ -+ nvmem-cells = <&macaddr_factory_24>; -+ nvmem-cell-names = "mac-address"; - }; - - mdio: mdio-bus { -@@ -94,6 +109,26 @@ - }; - }; - -+&gsw { -+ mediatek,mdio = <&mdio>; -+ mediatek,portmap = "llllw"; -+ mediatek,mdio_master_pinmux = <0>; -+ reset-gpios = <&pio 28 0>; -+ interrupt-parent = <&pio>; -+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; -+ status = "okay"; -+ -+ port6: port@6 { -+ compatible = "mediatek,mt753x-port"; -+ reg = <6>; -+ phy-mode = "sgmii"; -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ }; -+ }; -+}; -+ - &i2c { - pinctrl-names = "default"; - pinctrl-0 = <&i2c_pins>; -@@ -272,3 +307,17 @@ - pinctrl-0 = <&watchdog_pins>; - status = "okay"; - }; -+ -+&factory { -+ compatible = "nvmem-cells"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ macaddr_factory_24: macaddr@24 { -+ reg = <0x24 0x6>; -+ }; -+ -+ macaddr_factory_2a: macaddr@2a { -+ reg = <0x2a 0x6>; -+ }; -+}; diff --git a/target/linux/mediatek/patches-5.4/0006-dts-fix-bpi2-console.patch b/target/linux/mediatek/patches-5.4/0006-dts-fix-bpi2-console.patch deleted file mode 100644 index b7251177f2..0000000000 --- a/target/linux/mediatek/patches-5.4/0006-dts-fix-bpi2-console.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts -@@ -19,6 +19,7 @@ - - chosen { - stdout-path = "serial2:115200n8"; -+ bootargs = "console=ttyS2,115200n8"; - }; - - cpus { diff --git a/target/linux/mediatek/patches-5.4/0006-dts-fix-bpi64-console.patch b/target/linux/mediatek/patches-5.4/0006-dts-fix-bpi64-console.patch deleted file mode 100644 index 07a2eae245..0000000000 --- a/target/linux/mediatek/patches-5.4/0006-dts-fix-bpi64-console.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -22,7 +22,7 @@ - - chosen { - stdout-path = "serial0:115200n8"; -- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512"; -+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512"; - }; - - cpus { diff --git a/target/linux/mediatek/patches-5.4/0010-dts-mt7629-rfb-fix-firmware-partition.patch b/target/linux/mediatek/patches-5.4/0010-dts-mt7629-rfb-fix-firmware-partition.patch deleted file mode 100644 index 2c48e5706f..0000000000 --- a/target/linux/mediatek/patches-5.4/0010-dts-mt7629-rfb-fix-firmware-partition.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/arm/boot/dts/mt7629-rfb.dts -+++ b/arch/arm/boot/dts/mt7629-rfb.dts -@@ -168,8 +168,9 @@ - }; - - partition@b0000 { -- label = "kernel"; -+ label = "firmware"; - reg = <0xb0000 0xb50000>; -+ compatible = "denx,fit"; - }; - }; - }; diff --git a/target/linux/mediatek/patches-5.4/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch b/target/linux/mediatek/patches-5.4/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch deleted file mode 100644 index f2647e8ffe..0000000000 --- a/target/linux/mediatek/patches-5.4/0226-phy-phy-mtk-tphy-Add-hifsys-support.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 28f9a5e2a3f5441ab5594669ed82da11e32277a9 Mon Sep 17 00:00:00 2001 -From: Kristian Evensen -Date: Mon, 30 Apr 2018 14:38:01 +0200 -Subject: [PATCH] phy: phy-mtk-tphy: Add hifsys-support - ---- - drivers/phy/mediatek/phy-mtk-tphy.c | 20 ++++++++++++++++++++ - 1 file changed, 20 insertions(+) - ---- a/drivers/phy/mediatek/phy-mtk-tphy.c -+++ b/drivers/phy/mediatek/phy-mtk-tphy.c -@@ -15,6 +15,8 @@ - #include - #include - #include -+#include -+#include - - /* version V1 sub-banks offset base address */ - /* banks shared by multiple phys */ -@@ -263,6 +265,9 @@ - #define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0) - #define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x)) - -+#define HIF_SYSCFG1 0x14 -+#define HIF_SYSCFG1_PHY2_MASK (0x3 << 20) -+ - enum mtk_phy_version { - MTK_PHY_V1 = 1, - MTK_PHY_V2, -@@ -310,6 +315,7 @@ struct mtk_tphy { - struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */ - const struct mtk_phy_pdata *pdata; - struct mtk_phy_instance **phys; -+ struct regmap *hif; - int nphys; - int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */ - int src_coef; /* coefficient for slew rate calibrate */ -@@ -629,6 +635,10 @@ static void pcie_phy_instance_init(struc - if (tphy->pdata->version != MTK_PHY_V1) - return; - -+ if (tphy->hif) -+ regmap_update_bits(tphy->hif, HIF_SYSCFG1, -+ HIF_SYSCFG1_PHY2_MASK, 0); -+ - tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0); - tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H); - tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2); -@@ -1114,6 +1124,16 @@ static int mtk_tphy_probe(struct platfor - &tphy->src_ref_clk); - device_property_read_u32(dev, "mediatek,src-coef", &tphy->src_coef); - -+ if (of_find_property(np, "mediatek,phy-switch", NULL)) { -+ tphy->hif = syscon_regmap_lookup_by_phandle(np, -+ "mediatek,phy-switch"); -+ if (IS_ERR(tphy->hif)) { -+ dev_err(&pdev->dev, -+ "missing \"mediatek,phy-switch\" phandle\n"); -+ return PTR_ERR(tphy->hif); -+ } -+ } -+ - port = 0; - for_each_child_of_node(np, child_np) { - struct mtk_phy_instance *instance; diff --git a/target/linux/mediatek/patches-5.4/0301-mtd-mtk-ecc-move-mtk-ecc-header-file-to-include-mtd.patch b/target/linux/mediatek/patches-5.4/0301-mtd-mtk-ecc-move-mtk-ecc-header-file-to-include-mtd.patch deleted file mode 100644 index d9ab339fa8..0000000000 --- a/target/linux/mediatek/patches-5.4/0301-mtd-mtk-ecc-move-mtk-ecc-header-file-to-include-mtd.patch +++ /dev/null @@ -1,139 +0,0 @@ -From a2479dc254ebe31c84fbcfda73f35e2321576494 Mon Sep 17 00:00:00 2001 -From: Xiangsheng Hou -Date: Tue, 19 Mar 2019 13:57:38 +0800 -Subject: [PATCH 1/6] mtd: mtk ecc: move mtk ecc header file to include/mtd - -Change-Id: I8dc1d30e21b40d68ef5efd9587012f82970156a5 -Signed-off-by: Xiangsheng Hou ---- - drivers/mtd/nand/raw/mtk_ecc.c | 3 +-- - drivers/mtd/nand/raw/mtk_nand.c | 2 +- - {drivers/mtd/nand/raw => include/linux/mtd}/mtk_ecc.h | 0 - 3 files changed, 2 insertions(+), 3 deletions(-) - rename {drivers/mtd/nand/raw => include/linux/mtd}/mtk_ecc.h (100%) - ---- a/drivers/mtd/nand/raw/mtk_ecc.c -+++ b/drivers/mtd/nand/raw/mtk_ecc.c -@@ -15,8 +15,7 @@ - #include - #include - #include -- --#include "mtk_ecc.h" -+#include - - #define ECC_IDLE_MASK BIT(0) - #define ECC_IRQ_EN BIT(0) ---- a/drivers/mtd/nand/raw/mtk_nand.c -+++ b/drivers/mtd/nand/raw/mtk_nand.c -@@ -17,7 +17,7 @@ - #include - #include - #include --#include "mtk_ecc.h" -+#include - - /* NAND controller register definition */ - #define NFI_CNFG (0x00) ---- /dev/null -+++ b/include/linux/mtd/mtk_ecc.h -@@ -0,0 +1,49 @@ -+/* -+ * MTK SDG1 ECC controller -+ * -+ * Copyright (c) 2016 Mediatek -+ * Authors: Xiaolei Li -+ * Jorge Ramirez-Ortiz -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#ifndef __DRIVERS_MTD_NAND_MTK_ECC_H__ -+#define __DRIVERS_MTD_NAND_MTK_ECC_H__ -+ -+#include -+ -+enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1}; -+enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE}; -+ -+struct device_node; -+struct mtk_ecc; -+ -+struct mtk_ecc_stats { -+ u32 corrected; -+ u32 bitflips; -+ u32 failed; -+}; -+ -+struct mtk_ecc_config { -+ enum mtk_ecc_operation op; -+ enum mtk_ecc_mode mode; -+ dma_addr_t addr; -+ u32 strength; -+ u32 sectors; -+ u32 len; -+}; -+ -+int mtk_ecc_encode(struct mtk_ecc *, struct mtk_ecc_config *, u8 *, u32); -+void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int); -+int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation); -+int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *); -+void mtk_ecc_disable(struct mtk_ecc *); -+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p); -+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc); -+ -+struct mtk_ecc *of_mtk_ecc_get(struct device_node *); -+void mtk_ecc_release(struct mtk_ecc *); -+ -+#endif ---- a/drivers/mtd/nand/raw/mtk_ecc.h -+++ /dev/null -@@ -1,47 +0,0 @@ --/* SPDX-License-Identifier: GPL-2.0 OR MIT */ --/* -- * MTK SDG1 ECC controller -- * -- * Copyright (c) 2016 Mediatek -- * Authors: Xiaolei Li -- * Jorge Ramirez-Ortiz -- */ -- --#ifndef __DRIVERS_MTD_NAND_MTK_ECC_H__ --#define __DRIVERS_MTD_NAND_MTK_ECC_H__ -- --#include -- --enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1}; --enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE}; -- --struct device_node; --struct mtk_ecc; -- --struct mtk_ecc_stats { -- u32 corrected; -- u32 bitflips; -- u32 failed; --}; -- --struct mtk_ecc_config { -- enum mtk_ecc_operation op; -- enum mtk_ecc_mode mode; -- dma_addr_t addr; -- u32 strength; -- u32 sectors; -- u32 len; --}; -- --int mtk_ecc_encode(struct mtk_ecc *, struct mtk_ecc_config *, u8 *, u32); --void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int); --int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation); --int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *); --void mtk_ecc_disable(struct mtk_ecc *); --void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p); --unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc); -- --struct mtk_ecc *of_mtk_ecc_get(struct device_node *); --void mtk_ecc_release(struct mtk_ecc *); -- --#endif diff --git a/target/linux/mediatek/patches-5.4/0303-mtd-spinand-disable-on-die-ECC.patch b/target/linux/mediatek/patches-5.4/0303-mtd-spinand-disable-on-die-ECC.patch deleted file mode 100644 index 5c18ea0f74..0000000000 --- a/target/linux/mediatek/patches-5.4/0303-mtd-spinand-disable-on-die-ECC.patch +++ /dev/null @@ -1,31 +0,0 @@ -From b341f120cfc9ca1dfd48364b7f36ac2c1fbdea43 Mon Sep 17 00:00:00 2001 -From: Xiangsheng Hou -Date: Wed, 3 Apr 2019 16:30:01 +0800 -Subject: [PATCH 3/6] mtd: spinand: disable on-die ECC - -Change-Id: I9745adaed5295202fabbe8ab8947885c57a5b847 -Signed-off-by: Xiangsheng Hou ---- - drivers/mtd/nand/spi/core.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -491,7 +491,7 @@ static int spinand_mtd_read(struct mtd_i - int ret = 0; - - if (ops->mode != MTD_OPS_RAW && spinand->eccinfo.ooblayout) -- enable_ecc = true; -+ enable_ecc = false; - - mutex_lock(&spinand->lock); - -@@ -539,7 +539,7 @@ static int spinand_mtd_write(struct mtd_ - int ret = 0; - - if (ops->mode != MTD_OPS_RAW && mtd->ooblayout) -- enable_ecc = true; -+ enable_ecc = false; - - mutex_lock(&spinand->lock); - diff --git a/target/linux/mediatek/patches-5.4/0306-spi-spi-mem-MediaTek-Add-SPI-NAND-Flash-interface-dr.patch b/target/linux/mediatek/patches-5.4/0306-spi-spi-mem-MediaTek-Add-SPI-NAND-Flash-interface-dr.patch deleted file mode 100644 index b3672e5b15..0000000000 --- a/target/linux/mediatek/patches-5.4/0306-spi-spi-mem-MediaTek-Add-SPI-NAND-Flash-interface-dr.patch +++ /dev/null @@ -1,1246 +0,0 @@ -From 1ecb38eabd90efe93957d0a822a167560c39308a Mon Sep 17 00:00:00 2001 -From: Xiangsheng Hou -Date: Wed, 20 Mar 2019 16:19:51 +0800 -Subject: [PATCH 6/6] spi: spi-mem: MediaTek: Add SPI NAND Flash interface - driver for MediaTek MT7622 - -Change-Id: I3e78406bb9b46b0049d3988a5c71c7069e4f809c -Signed-off-by: Xiangsheng Hou ---- - drivers/spi/Kconfig | 9 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-mtk-snfi.c | 1183 ++++++++++++++++++++++++++++++++++++ - 3 files changed, 1193 insertions(+) - create mode 100644 drivers/spi/spi-mtk-snfi.c - ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -60,6 +60,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mp - obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o - obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o - obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o -+obj-$(CONFIG_SPI_MTK_SNFI) += spi-mtk-snfi.o - obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o - obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o - obj-$(CONFIG_SPI_MXIC) += spi-mxic.o ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -427,6 +427,15 @@ config SPI_MT65XX - say Y or M here.If you are not sure, say N. - SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs. - -+config SPI_MTK_SNFI -+ tristate "MediaTek SPI NAND interface" -+ select MTD_SPI_NAND -+ help -+ This selects the SPI NAND FLASH interface(SNFI), -+ which could be found on MediaTek Soc. -+ Say Y or M here.If you are not sure, say N. -+ Note Parallel Nand and SPI NAND is alternative on MediaTek SoCs. -+ - config SPI_MT7621 - tristate "MediaTek MT7621 SPI Controller" - depends on RALINK || COMPILE_TEST ---- /dev/null -+++ b/drivers/spi/spi-mtk-snfi.c -@@ -0,0 +1,1200 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Driver for MediaTek SPI Nand interface -+ * -+ * Copyright (C) 2018 MediaTek Inc. -+ * Authors: Xiangsheng Hou -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* NAND controller register definition */ -+/* NFI control */ -+#define NFI_CNFG 0x00 -+#define CNFG_DMA BIT(0) -+#define CNFG_READ_EN BIT(1) -+#define CNFG_DMA_BURST_EN BIT(2) -+#define CNFG_BYTE_RW BIT(6) -+#define CNFG_HW_ECC_EN BIT(8) -+#define CNFG_AUTO_FMT_EN BIT(9) -+#define CNFG_OP_PROGRAM (3UL << 12) -+#define CNFG_OP_CUST (6UL << 12) -+#define NFI_PAGEFMT 0x04 -+#define PAGEFMT_512 0 -+#define PAGEFMT_2K 1 -+#define PAGEFMT_4K 2 -+#define PAGEFMT_FDM_SHIFT 8 -+#define PAGEFMT_FDM_ECC_SHIFT 12 -+#define NFI_CON 0x08 -+#define CON_FIFO_FLUSH BIT(0) -+#define CON_NFI_RST BIT(1) -+#define CON_BRD BIT(8) -+#define CON_BWR BIT(9) -+#define CON_SEC_SHIFT 12 -+#define NFI_INTR_EN 0x10 -+#define INTR_AHB_DONE_EN BIT(6) -+#define NFI_INTR_STA 0x14 -+#define NFI_CMD 0x20 -+#define NFI_STA 0x60 -+#define STA_EMP_PAGE BIT(12) -+#define NAND_FSM_MASK (0x1f << 24) -+#define NFI_FSM_MASK (0xf << 16) -+#define NFI_ADDRCNTR 0x70 -+#define CNTR_MASK GENMASK(16, 12) -+#define ADDRCNTR_SEC_SHIFT 12 -+#define ADDRCNTR_SEC(val) \ -+ (((val) & CNTR_MASK) >> ADDRCNTR_SEC_SHIFT) -+#define NFI_STRADDR 0x80 -+#define NFI_BYTELEN 0x84 -+#define NFI_CSEL 0x90 -+#define NFI_FDML(x) (0xa0 + (x) * sizeof(u32) * 2) -+#define NFI_FDMM(x) (0xa4 + (x) * sizeof(u32) * 2) -+#define NFI_MASTER_STA 0x224 -+#define MASTER_STA_MASK 0x0fff -+/* NFI_SPI control */ -+#define SNFI_MAC_OUTL 0x504 -+#define SNFI_MAC_INL 0x508 -+#define SNFI_RD_CTL2 0x510 -+#define RD_CMD_MASK 0x00ff -+#define RD_DUMMY_SHIFT 8 -+#define SNFI_RD_CTL3 0x514 -+#define RD_ADDR_MASK 0xffff -+#define SNFI_MISC_CTL 0x538 -+#define RD_MODE_X2 BIT(16) -+#define RD_MODE_X4 (2UL << 16) -+#define RD_QDUAL_IO (4UL << 16) -+#define RD_MODE_MASK (7UL << 16) -+#define RD_CUSTOM_EN BIT(6) -+#define WR_CUSTOM_EN BIT(7) -+#define WR_X4_EN BIT(20) -+#define SW_RST BIT(28) -+#define SNFI_MISC_CTL2 0x53c -+#define WR_LEN_SHIFT 16 -+#define SNFI_PG_CTL1 0x524 -+#define WR_LOAD_CMD_SHIFT 8 -+#define SNFI_PG_CTL2 0x528 -+#define WR_LOAD_ADDR_MASK 0xffff -+#define SNFI_MAC_CTL 0x500 -+#define MAC_WIP BIT(0) -+#define MAC_WIP_READY BIT(1) -+#define MAC_TRIG BIT(2) -+#define MAC_EN BIT(3) -+#define MAC_SIO_SEL BIT(4) -+#define SNFI_STA_CTL1 0x550 -+#define SPI_STATE_IDLE 0xf -+#define SNFI_CNFG 0x55c -+#define SNFI_MODE_EN BIT(0) -+#define SNFI_GPRAM_DATA 0x800 -+#define SNFI_GPRAM_MAX_LEN 16 -+ -+/* Dummy command trigger NFI to spi mode */ -+#define NAND_CMD_DUMMYREAD 0x00 -+#define NAND_CMD_DUMMYPROG 0x80 -+ -+#define MTK_TIMEOUT 500000 -+#define MTK_RESET_TIMEOUT 1000000 -+#define MTK_SNFC_MIN_SPARE 16 -+#define KB(x) ((x) * 1024UL) -+ -+/* -+ * supported spare size of each IP. -+ * order should be the same with the spare size bitfiled defination of -+ * register NFI_PAGEFMT. -+ */ -+static const u8 spare_size_mt7622[] = { -+ 16, 26, 27, 28 -+}; -+ -+struct mtk_snfi_caps { -+ const u8 *spare_size; -+ u8 num_spare_size; -+ u32 nand_sec_size; -+ u8 nand_fdm_size; -+ u8 nand_fdm_ecc_size; -+ u8 ecc_parity_bits; -+ u8 pageformat_spare_shift; -+ u8 bad_mark_swap; -+}; -+ -+struct mtk_snfi_bad_mark_ctl { -+ void (*bm_swap)(struct spi_mem *mem, u8 *buf, int raw); -+ u32 sec; -+ u32 pos; -+}; -+ -+struct mtk_snfi_nand_chip { -+ struct mtk_snfi_bad_mark_ctl bad_mark; -+ u32 spare_per_sector; -+}; -+ -+struct mtk_snfi_clk { -+ struct clk *nfi_clk; -+ struct clk *spi_clk; -+}; -+ -+struct mtk_snfi { -+ const struct mtk_snfi_caps *caps; -+ struct mtk_snfi_nand_chip snfi_nand; -+ struct mtk_snfi_clk clk; -+ struct mtk_ecc_config ecc_cfg; -+ struct mtk_ecc *ecc; -+ struct completion done; -+ struct device *dev; -+ -+ void __iomem *regs; -+ -+ u8 *buffer; -+}; -+ -+static inline u8 *oob_ptr(struct spi_mem *mem, int i) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u8 *poi; -+ -+ /* map the sector's FDM data to free oob: -+ * the beginning of the oob area stores the FDM data of bad mark -+ */ -+ -+ if (i < snfi_nand->bad_mark.sec) -+ poi = spinand->oobbuf + (i + 1) * snfi->caps->nand_fdm_size; -+ else if (i == snfi_nand->bad_mark.sec) -+ poi = spinand->oobbuf; -+ else -+ poi = spinand->oobbuf + i * snfi->caps->nand_fdm_size; -+ -+ return poi; -+} -+ -+static inline int mtk_data_len(struct spi_mem *mem) -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ -+ return snfi->caps->nand_sec_size + snfi_nand->spare_per_sector; -+} -+ -+static inline u8 *mtk_oob_ptr(struct spi_mem *mem, -+ const u8 *p, int i) -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ -+ return (u8 *)p + i * mtk_data_len(mem) + snfi->caps->nand_sec_size; -+} -+ -+static void mtk_snfi_bad_mark_swap(struct spi_mem *mem, -+ u8 *buf, int raw) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u32 bad_pos = snfi_nand->bad_mark.pos; -+ -+ if (raw) -+ bad_pos += snfi_nand->bad_mark.sec * mtk_data_len(mem); -+ else -+ bad_pos += snfi_nand->bad_mark.sec * snfi->caps->nand_sec_size; -+ -+ swap(spinand->oobbuf[0], buf[bad_pos]); -+} -+ -+static void mtk_snfi_set_bad_mark_ctl(struct mtk_snfi_bad_mark_ctl *bm_ctl, -+ struct spi_mem *mem) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ -+ bm_ctl->bm_swap = mtk_snfi_bad_mark_swap; -+ bm_ctl->sec = mtd->writesize / mtk_data_len(mem); -+ bm_ctl->pos = mtd->writesize % mtk_data_len(mem); -+} -+ -+static void mtk_snfi_mac_enable(struct mtk_snfi *snfi) -+{ -+ u32 mac; -+ -+ mac = readl(snfi->regs + SNFI_MAC_CTL); -+ mac &= ~MAC_SIO_SEL; -+ mac |= MAC_EN; -+ -+ writel(mac, snfi->regs + SNFI_MAC_CTL); -+} -+ -+static int mtk_snfi_mac_trigger(struct mtk_snfi *snfi) -+{ -+ u32 mac, reg; -+ int ret = 0; -+ -+ mac = readl(snfi->regs + SNFI_MAC_CTL); -+ mac |= MAC_TRIG; -+ writel(mac, snfi->regs + SNFI_MAC_CTL); -+ -+ ret = readl_poll_timeout_atomic(snfi->regs + SNFI_MAC_CTL, reg, -+ reg & MAC_WIP_READY, 10, -+ MTK_TIMEOUT); -+ if (ret < 0) { -+ dev_err(snfi->dev, "polling wip ready for read timeout\n"); -+ return -EIO; -+ } -+ -+ ret = readl_poll_timeout_atomic(snfi->regs + SNFI_MAC_CTL, reg, -+ !(reg & MAC_WIP), 10, -+ MTK_TIMEOUT); -+ if (ret < 0) { -+ dev_err(snfi->dev, "polling flash update timeout\n"); -+ return -EIO; -+ } -+ -+ return ret; -+} -+ -+static void mtk_snfi_mac_leave(struct mtk_snfi *snfi) -+{ -+ u32 mac; -+ -+ mac = readl(snfi->regs + SNFI_MAC_CTL); -+ mac &= ~(MAC_TRIG | MAC_EN | MAC_SIO_SEL); -+ writel(mac, snfi->regs + SNFI_MAC_CTL); -+} -+ -+static int mtk_snfi_mac_op(struct mtk_snfi *snfi) -+{ -+ int ret = 0; -+ -+ mtk_snfi_mac_enable(snfi); -+ -+ ret = mtk_snfi_mac_trigger(snfi); -+ if (ret) -+ return ret; -+ -+ mtk_snfi_mac_leave(snfi); -+ -+ return ret; -+} -+ -+static irqreturn_t mtk_snfi_irq(int irq, void *id) -+{ -+ struct mtk_snfi *snfi = id; -+ u16 sta, ien; -+ -+ sta = readw(snfi->regs + NFI_INTR_STA); -+ ien = readw(snfi->regs + NFI_INTR_EN); -+ -+ if (!(sta & ien)) -+ return IRQ_NONE; -+ -+ writew(~sta & ien, snfi->regs + NFI_INTR_EN); -+ complete(&snfi->done); -+ -+ return IRQ_HANDLED; -+} -+ -+static int mtk_snfi_enable_clk(struct device *dev, struct mtk_snfi_clk *clk) -+{ -+ int ret; -+ -+ ret = clk_prepare_enable(clk->nfi_clk); -+ if (ret) { -+ dev_err(dev, "failed to enable nfi clk\n"); -+ return ret; -+ } -+ -+ ret = clk_prepare_enable(clk->spi_clk); -+ if (ret) { -+ dev_err(dev, "failed to enable spi clk\n"); -+ clk_disable_unprepare(clk->nfi_clk); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static void mtk_snfi_disable_clk(struct mtk_snfi_clk *clk) -+{ -+ clk_disable_unprepare(clk->nfi_clk); -+ clk_disable_unprepare(clk->spi_clk); -+} -+ -+static int mtk_snfi_reset(struct mtk_snfi *snfi) -+{ -+ u32 val; -+ int ret; -+ -+ /* SW reset controller */ -+ val = readl(snfi->regs + SNFI_MISC_CTL) | SW_RST; -+ writel(val, snfi->regs + SNFI_MISC_CTL); -+ -+ ret = readw_poll_timeout(snfi->regs + SNFI_STA_CTL1, val, -+ !(val & SPI_STATE_IDLE), 50, -+ MTK_RESET_TIMEOUT); -+ if (ret) { -+ dev_warn(snfi->dev, "spi state active in reset [0x%x] = 0x%x\n", -+ SNFI_STA_CTL1, val); -+ return ret; -+ } -+ -+ val = readl(snfi->regs + SNFI_MISC_CTL); -+ val &= ~SW_RST; -+ writel(val, snfi->regs + SNFI_MISC_CTL); -+ -+ /* reset all registers and force the NFI master to terminate */ -+ writew(CON_FIFO_FLUSH | CON_NFI_RST, snfi->regs + NFI_CON); -+ ret = readw_poll_timeout(snfi->regs + NFI_STA, val, -+ !(val & (NFI_FSM_MASK | NAND_FSM_MASK)), 50, -+ MTK_RESET_TIMEOUT); -+ if (ret) { -+ dev_warn(snfi->dev, "nfi active in reset [0x%x] = 0x%x\n", -+ NFI_STA, val); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int mtk_snfi_set_spare_per_sector(struct spinand_device *spinand, -+ const struct mtk_snfi_caps *caps, -+ u32 *sps) -+{ -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ const u8 *spare = caps->spare_size; -+ u32 sectors, i, closest_spare = 0; -+ -+ sectors = mtd->writesize / caps->nand_sec_size; -+ *sps = mtd->oobsize / sectors; -+ -+ if (*sps < MTK_SNFC_MIN_SPARE) -+ return -EINVAL; -+ -+ for (i = 0; i < caps->num_spare_size; i++) { -+ if (*sps >= spare[i] && spare[i] >= spare[closest_spare]) { -+ closest_spare = i; -+ if (*sps == spare[i]) -+ break; -+ } -+ } -+ -+ *sps = spare[closest_spare]; -+ -+ return 0; -+} -+ -+static void mtk_snfi_read_fdm_data(struct spi_mem *mem, -+ u32 sectors) -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ const struct mtk_snfi_caps *caps = snfi->caps; -+ u32 vall, valm; -+ int i, j; -+ u8 *oobptr; -+ -+ for (i = 0; i < sectors; i++) { -+ oobptr = oob_ptr(mem, i); -+ vall = readl(snfi->regs + NFI_FDML(i)); -+ valm = readl(snfi->regs + NFI_FDMM(i)); -+ -+ for (j = 0; j < caps->nand_fdm_size; j++) -+ oobptr[j] = (j >= 4 ? valm : vall) >> ((j % 4) * 8); -+ } -+} -+ -+static void mtk_snfi_write_fdm_data(struct spi_mem *mem, -+ u32 sectors) -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ const struct mtk_snfi_caps *caps = snfi->caps; -+ u32 vall, valm; -+ int i, j; -+ u8 *oobptr; -+ -+ for (i = 0; i < sectors; i++) { -+ oobptr = oob_ptr(mem, i); -+ vall = 0; -+ valm = 0; -+ for (j = 0; j < 8; j++) { -+ if (j < 4) -+ vall |= (j < caps->nand_fdm_size ? oobptr[j] : -+ 0xff) << (j * 8); -+ else -+ valm |= (j < caps->nand_fdm_size ? oobptr[j] : -+ 0xff) << ((j - 4) * 8); -+ } -+ writel(vall, snfi->regs + NFI_FDML(i)); -+ writel(valm, snfi->regs + NFI_FDMM(i)); -+ } -+} -+ -+static int mtk_snfi_update_ecc_stats(struct spi_mem *mem, -+ u8 *buf, u32 sectors) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct mtk_ecc_stats stats; -+ int rc, i; -+ -+ rc = readl(snfi->regs + NFI_STA) & STA_EMP_PAGE; -+ if (rc) { -+ memset(buf, 0xff, sectors * snfi->caps->nand_sec_size); -+ for (i = 0; i < sectors; i++) -+ memset(spinand->oobbuf, 0xff, -+ snfi->caps->nand_fdm_size); -+ return 0; -+ } -+ -+ mtk_ecc_get_stats(snfi->ecc, &stats, sectors); -+ mtd->ecc_stats.corrected += stats.corrected; -+ mtd->ecc_stats.failed += stats.failed; -+ -+ return 0; -+} -+ -+static int mtk_snfi_hw_runtime_config(struct spi_mem *mem) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ struct nand_device *nand = mtd_to_nanddev(mtd); -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ const struct mtk_snfi_caps *caps = snfi->caps; -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u32 fmt, spare, i = 0; -+ int ret; -+ -+ ret = mtk_snfi_set_spare_per_sector(spinand, caps, &spare); -+ if (ret) -+ return ret; -+ -+ /* calculate usable oob bytes for ecc parity data */ -+ snfi_nand->spare_per_sector = spare; -+ spare -= caps->nand_fdm_size; -+ -+ nand->memorg.oobsize = snfi_nand->spare_per_sector -+ * (mtd->writesize / caps->nand_sec_size); -+ mtd->oobsize = nanddev_per_page_oobsize(nand); -+ -+ snfi->ecc_cfg.strength = (spare << 3) / caps->ecc_parity_bits; -+ mtk_ecc_adjust_strength(snfi->ecc, &snfi->ecc_cfg.strength); -+ -+ switch (mtd->writesize) { -+ case 512: -+ fmt = PAGEFMT_512; -+ break; -+ case KB(2): -+ fmt = PAGEFMT_2K; -+ break; -+ case KB(4): -+ fmt = PAGEFMT_4K; -+ break; -+ default: -+ dev_err(snfi->dev, "invalid page len: %d\n", mtd->writesize); -+ return -EINVAL; -+ } -+ -+ /* Setup PageFormat */ -+ while (caps->spare_size[i] != snfi_nand->spare_per_sector) { -+ i++; -+ if (i == (caps->num_spare_size - 1)) { -+ dev_err(snfi->dev, "invalid spare size %d\n", -+ snfi_nand->spare_per_sector); -+ return -EINVAL; -+ } -+ } -+ -+ fmt |= i << caps->pageformat_spare_shift; -+ fmt |= caps->nand_fdm_size << PAGEFMT_FDM_SHIFT; -+ fmt |= caps->nand_fdm_ecc_size << PAGEFMT_FDM_ECC_SHIFT; -+ writel(fmt, snfi->regs + NFI_PAGEFMT); -+ -+ snfi->ecc_cfg.len = caps->nand_sec_size + caps->nand_fdm_ecc_size; -+ -+ mtk_snfi_set_bad_mark_ctl(&snfi_nand->bad_mark, mem); -+ -+ return 0; -+} -+ -+static int mtk_snfi_read_from_cache(struct spi_mem *mem, -+ const struct spi_mem_op *op, int oob_on) -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ u32 sectors = mtd->writesize / snfi->caps->nand_sec_size; -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u32 reg, len, col_addr = 0; -+ int dummy_cycle, ret; -+ dma_addr_t dma_addr; -+ -+ len = sectors * (snfi->caps->nand_sec_size -+ + snfi_nand->spare_per_sector); -+ -+ dma_addr = dma_map_single(snfi->dev, snfi->buffer, -+ len, DMA_FROM_DEVICE); -+ ret = dma_mapping_error(snfi->dev, dma_addr); -+ if (ret) { -+ dev_err(snfi->dev, "dma mapping error\n"); -+ return -EINVAL; -+ } -+ -+ /* set Read cache command and dummy cycle */ -+ dummy_cycle = (op->dummy.nbytes << 3) >> (ffs(op->dummy.buswidth) - 1); -+ reg = ((op->cmd.opcode & RD_CMD_MASK) | -+ (dummy_cycle << RD_DUMMY_SHIFT)); -+ writel(reg, snfi->regs + SNFI_RD_CTL2); -+ -+ writel((col_addr & RD_ADDR_MASK), snfi->regs + SNFI_RD_CTL3); -+ -+ reg = readl(snfi->regs + SNFI_MISC_CTL); -+ reg |= RD_CUSTOM_EN; -+ reg &= ~(RD_MODE_MASK | WR_X4_EN); -+ -+ /* set data and addr buswidth */ -+ if (op->data.buswidth == 4) -+ reg |= RD_MODE_X4; -+ else if (op->data.buswidth == 2) -+ reg |= RD_MODE_X2; -+ -+ if (op->addr.buswidth == 4 || op->addr.buswidth == 2) -+ reg |= RD_QDUAL_IO; -+ writel(reg, snfi->regs + SNFI_MISC_CTL); -+ -+ writel(len, snfi->regs + SNFI_MISC_CTL2); -+ writew(sectors << CON_SEC_SHIFT, snfi->regs + NFI_CON); -+ reg = readw(snfi->regs + NFI_CNFG); -+ reg |= CNFG_READ_EN | CNFG_DMA_BURST_EN | CNFG_DMA | CNFG_OP_CUST; -+ -+ if (!oob_on) { -+ reg |= CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN; -+ writew(reg, snfi->regs + NFI_CNFG); -+ -+ snfi->ecc_cfg.mode = ECC_NFI_MODE; -+ snfi->ecc_cfg.sectors = sectors; -+ snfi->ecc_cfg.op = ECC_DECODE; -+ ret = mtk_ecc_enable(snfi->ecc, &snfi->ecc_cfg); -+ if (ret) { -+ dev_err(snfi->dev, "ecc enable failed\n"); -+ /* clear NFI_CNFG */ -+ reg &= ~(CNFG_READ_EN | CNFG_DMA_BURST_EN | CNFG_DMA | -+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); -+ writew(reg, snfi->regs + NFI_CNFG); -+ goto out; -+ } -+ } else { -+ writew(reg, snfi->regs + NFI_CNFG); -+ } -+ -+ writel(lower_32_bits(dma_addr), snfi->regs + NFI_STRADDR); -+ readw(snfi->regs + NFI_INTR_STA); -+ writew(INTR_AHB_DONE_EN, snfi->regs + NFI_INTR_EN); -+ -+ init_completion(&snfi->done); -+ -+ /* set dummy command to trigger NFI enter SPI mode */ -+ writew(NAND_CMD_DUMMYREAD, snfi->regs + NFI_CMD); -+ reg = readl(snfi->regs + NFI_CON) | CON_BRD; -+ writew(reg, snfi->regs + NFI_CON); -+ -+ ret = wait_for_completion_timeout(&snfi->done, msecs_to_jiffies(500)); -+ if (!ret) { -+ dev_err(snfi->dev, "read ahb done timeout\n"); -+ writew(0, snfi->regs + NFI_INTR_EN); -+ ret = -ETIMEDOUT; -+ goto out; -+ } -+ -+ ret = readl_poll_timeout_atomic(snfi->regs + NFI_BYTELEN, reg, -+ ADDRCNTR_SEC(reg) >= sectors, 10, -+ MTK_TIMEOUT); -+ if (ret < 0) { -+ dev_err(snfi->dev, "polling read byte len timeout\n"); -+ ret = -EIO; -+ } else { -+ if (!oob_on) { -+ ret = mtk_ecc_wait_done(snfi->ecc, ECC_DECODE); -+ if (ret) { -+ dev_warn(snfi->dev, "wait ecc done timeout\n"); -+ } else { -+ mtk_snfi_update_ecc_stats(mem, snfi->buffer, -+ sectors); -+ mtk_snfi_read_fdm_data(mem, sectors); -+ } -+ } -+ } -+ -+ if (oob_on) -+ goto out; -+ -+ mtk_ecc_disable(snfi->ecc); -+out: -+ dma_unmap_single(snfi->dev, dma_addr, len, DMA_FROM_DEVICE); -+ writel(0, snfi->regs + NFI_CON); -+ writel(0, snfi->regs + NFI_CNFG); -+ reg = readl(snfi->regs + SNFI_MISC_CTL); -+ reg &= ~RD_CUSTOM_EN; -+ writel(reg, snfi->regs + SNFI_MISC_CTL); -+ -+ return ret; -+} -+ -+static int mtk_snfi_write_to_cache(struct spi_mem *mem, -+ const struct spi_mem_op *op, -+ int oob_on) -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ u32 sectors = mtd->writesize / snfi->caps->nand_sec_size; -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u32 reg, len, col_addr = 0; -+ dma_addr_t dma_addr; -+ int ret; -+ -+ len = sectors * (snfi->caps->nand_sec_size -+ + snfi_nand->spare_per_sector); -+ -+ dma_addr = dma_map_single(snfi->dev, snfi->buffer, len, -+ DMA_TO_DEVICE); -+ ret = dma_mapping_error(snfi->dev, dma_addr); -+ if (ret) { -+ dev_err(snfi->dev, "dma mapping error\n"); -+ return -EINVAL; -+ } -+ -+ /* set program load cmd and address */ -+ reg = (op->cmd.opcode << WR_LOAD_CMD_SHIFT); -+ writel(reg, snfi->regs + SNFI_PG_CTL1); -+ writel(col_addr & WR_LOAD_ADDR_MASK, snfi->regs + SNFI_PG_CTL2); -+ -+ reg = readl(snfi->regs + SNFI_MISC_CTL); -+ reg |= WR_CUSTOM_EN; -+ reg &= ~(RD_MODE_MASK | WR_X4_EN); -+ -+ if (op->data.buswidth == 4) -+ reg |= WR_X4_EN; -+ writel(reg, snfi->regs + SNFI_MISC_CTL); -+ -+ writel(len << WR_LEN_SHIFT, snfi->regs + SNFI_MISC_CTL2); -+ writew(sectors << CON_SEC_SHIFT, snfi->regs + NFI_CON); -+ -+ reg = readw(snfi->regs + NFI_CNFG); -+ reg &= ~(CNFG_READ_EN | CNFG_BYTE_RW); -+ reg |= CNFG_DMA | CNFG_DMA_BURST_EN | CNFG_OP_PROGRAM; -+ -+ if (!oob_on) { -+ reg |= CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN; -+ writew(reg, snfi->regs + NFI_CNFG); -+ -+ snfi->ecc_cfg.mode = ECC_NFI_MODE; -+ snfi->ecc_cfg.op = ECC_ENCODE; -+ ret = mtk_ecc_enable(snfi->ecc, &snfi->ecc_cfg); -+ if (ret) { -+ dev_err(snfi->dev, "ecc enable failed\n"); -+ /* clear NFI_CNFG */ -+ reg &= ~(CNFG_DMA_BURST_EN | CNFG_DMA | -+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); -+ writew(reg, snfi->regs + NFI_CNFG); -+ dma_unmap_single(snfi->dev, dma_addr, len, -+ DMA_FROM_DEVICE); -+ goto out; -+ } -+ /* write OOB into the FDM registers (OOB area in MTK NAND) */ -+ mtk_snfi_write_fdm_data(mem, sectors); -+ } else { -+ writew(reg, snfi->regs + NFI_CNFG); -+ } -+ writel(lower_32_bits(dma_addr), snfi->regs + NFI_STRADDR); -+ readw(snfi->regs + NFI_INTR_STA); -+ writew(INTR_AHB_DONE_EN, snfi->regs + NFI_INTR_EN); -+ -+ init_completion(&snfi->done); -+ -+ /* set dummy command to trigger NFI enter SPI mode */ -+ writew(NAND_CMD_DUMMYPROG, snfi->regs + NFI_CMD); -+ reg = readl(snfi->regs + NFI_CON) | CON_BWR; -+ writew(reg, snfi->regs + NFI_CON); -+ -+ ret = wait_for_completion_timeout(&snfi->done, msecs_to_jiffies(500)); -+ if (!ret) { -+ dev_err(snfi->dev, "custom program done timeout\n"); -+ writew(0, snfi->regs + NFI_INTR_EN); -+ ret = -ETIMEDOUT; -+ goto ecc_disable; -+ } -+ -+ ret = readl_poll_timeout_atomic(snfi->regs + NFI_ADDRCNTR, reg, -+ ADDRCNTR_SEC(reg) >= sectors, -+ 10, MTK_TIMEOUT); -+ if (ret) -+ dev_err(snfi->dev, "hwecc write timeout\n"); -+ -+ecc_disable: -+ mtk_ecc_disable(snfi->ecc); -+ -+out: -+ dma_unmap_single(snfi->dev, dma_addr, len, DMA_TO_DEVICE); -+ writel(0, snfi->regs + NFI_CON); -+ writel(0, snfi->regs + NFI_CNFG); -+ reg = readl(snfi->regs + SNFI_MISC_CTL); -+ reg &= ~WR_CUSTOM_EN; -+ writel(reg, snfi->regs + SNFI_MISC_CTL); -+ -+ return ret; -+} -+ -+static int mtk_snfi_read(struct spi_mem *mem, -+ const struct spi_mem_op *op) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u32 col_addr = op->addr.val; -+ int i, ret, sectors, oob_on = false; -+ -+ if (col_addr == mtd->writesize) -+ oob_on = true; -+ -+ ret = mtk_snfi_read_from_cache(mem, op, oob_on); -+ if (ret) { -+ dev_warn(snfi->dev, "read from cache fail\n"); -+ return ret; -+ } -+ -+ sectors = mtd->writesize / snfi->caps->nand_sec_size; -+ for (i = 0; i < sectors; i++) { -+ if (oob_on) -+ memcpy(oob_ptr(mem, i), -+ mtk_oob_ptr(mem, snfi->buffer, i), -+ snfi->caps->nand_fdm_size); -+ -+ if (i == snfi_nand->bad_mark.sec && snfi->caps->bad_mark_swap) -+ snfi_nand->bad_mark.bm_swap(mem, snfi->buffer, -+ oob_on); -+ } -+ -+ if (!oob_on) -+ memcpy(spinand->databuf, snfi->buffer, mtd->writesize); -+ -+ return ret; -+} -+ -+static int mtk_snfi_write(struct spi_mem *mem, -+ const struct spi_mem_op *op) -+{ -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand; -+ u32 ret, i, sectors, col_addr = op->addr.val; -+ int oob_on = false; -+ -+ if (col_addr == mtd->writesize) -+ oob_on = true; -+ -+ sectors = mtd->writesize / snfi->caps->nand_sec_size; -+ memset(snfi->buffer, 0xff, mtd->writesize + mtd->oobsize); -+ -+ if (!oob_on) -+ memcpy(snfi->buffer, spinand->databuf, mtd->writesize); -+ -+ for (i = 0; i < sectors; i++) { -+ if (i == snfi_nand->bad_mark.sec && snfi->caps->bad_mark_swap) -+ snfi_nand->bad_mark.bm_swap(mem, snfi->buffer, oob_on); -+ -+ if (oob_on) -+ memcpy(mtk_oob_ptr(mem, snfi->buffer, i), -+ oob_ptr(mem, i), -+ snfi->caps->nand_fdm_size); -+ } -+ -+ ret = mtk_snfi_write_to_cache(mem, op, oob_on); -+ if (ret) -+ dev_warn(snfi->dev, "write to cache fail\n"); -+ -+ return ret; -+} -+ -+static int mtk_snfi_command_exec(struct mtk_snfi *snfi, -+ const u8 *txbuf, u8 *rxbuf, -+ const u32 txlen, const u32 rxlen) -+{ -+ u32 tmp, i, j, reg, m; -+ u8 *p_tmp = (u8 *)(&tmp); -+ int ret = 0; -+ -+ /* Moving tx data to NFI_SPI GPRAM */ -+ for (i = 0, m = 0; i < txlen; ) { -+ for (j = 0, tmp = 0; i < txlen && j < 4; i++, j++) -+ p_tmp[j] = txbuf[i]; -+ -+ writel(tmp, snfi->regs + SNFI_GPRAM_DATA + m); -+ m += 4; -+ } -+ -+ writel(txlen, snfi->regs + SNFI_MAC_OUTL); -+ writel(rxlen, snfi->regs + SNFI_MAC_INL); -+ ret = mtk_snfi_mac_op(snfi); -+ if (ret) -+ return ret; -+ -+ /* For NULL input data, this loop will be skipped */ -+ if (rxlen) -+ for (i = 0, m = 0; i < rxlen; ) { -+ reg = readl(snfi->regs + -+ SNFI_GPRAM_DATA + m); -+ for (j = 0; i < rxlen && j < 4; i++, j++, rxbuf++) { -+ if (m == 0 && i == 0) -+ j = i + txlen; -+ *rxbuf = (reg >> (j * 8)) & 0xFF; -+ } -+ m += 4; -+ } -+ -+ return ret; -+} -+ -+/* -+ * mtk_snfi_exec_op - to process command/data to send to the -+ * SPI NAND by mtk controller -+ */ -+static int mtk_snfi_exec_op(struct spi_mem *mem, -+ const struct spi_mem_op *op) -+ -+{ -+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master); -+ struct spinand_device *spinand = spi_mem_get_drvdata(mem); -+ struct mtd_info *mtd = spinand_to_mtd(spinand); -+ struct nand_device *nand = mtd_to_nanddev(mtd); -+ const struct spi_mem_op *read_cache; -+ const struct spi_mem_op *write_cache; -+ const struct spi_mem_op *update_cache; -+ u32 tmpbufsize, txlen = 0, rxlen = 0; -+ u8 *txbuf, *rxbuf = NULL, *buf; -+ int i, ret = 0; -+ -+ ret = mtk_snfi_reset(snfi); -+ if (ret) { -+ dev_warn(snfi->dev, "reset spi memory controller fail\n"); -+ return ret; -+ } -+ -+ /*if bbt initial, framework have detect nand information */ -+ if (nand->bbt.cache) { -+ read_cache = spinand->op_templates.read_cache; -+ write_cache = spinand->op_templates.write_cache; -+ update_cache = spinand->op_templates.update_cache; -+ -+ ret = mtk_snfi_hw_runtime_config(mem); -+ if (ret) -+ return ret; -+ -+ /* For Read/Write with cache, Erase use framework flow */ -+ if (op->cmd.opcode == read_cache->cmd.opcode) { -+ ret = mtk_snfi_read(mem, op); -+ if (ret) -+ dev_warn(snfi->dev, "snfi read fail\n"); -+ -+ return ret; -+ } else if ((op->cmd.opcode == write_cache->cmd.opcode) -+ || (op->cmd.opcode == update_cache->cmd.opcode)) { -+ ret = mtk_snfi_write(mem, op); -+ if (ret) -+ dev_warn(snfi->dev, "snfi write fail\n"); -+ -+ return ret; -+ } -+ } -+ -+ tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes + -+ op->dummy.nbytes + op->data.nbytes; -+ -+ txbuf = kzalloc(tmpbufsize, GFP_KERNEL); -+ if (!txbuf) -+ return -ENOMEM; -+ -+ txbuf[txlen++] = op->cmd.opcode; -+ -+ if (op->addr.nbytes) -+ for (i = 0; i < op->addr.nbytes; i++) -+ txbuf[txlen++] = op->addr.val >> -+ (8 * (op->addr.nbytes - i - 1)); -+ -+ txlen += op->dummy.nbytes; -+ -+ if (op->data.dir == SPI_MEM_DATA_OUT) -+ for (i = 0; i < op->data.nbytes; i++) { -+ buf = (u8 *)op->data.buf.out; -+ txbuf[txlen++] = buf[i]; -+ } -+ -+ if (op->data.dir == SPI_MEM_DATA_IN) { -+ rxbuf = (u8 *)op->data.buf.in; -+ rxlen += op->data.nbytes; -+ } -+ -+ ret = mtk_snfi_command_exec(snfi, txbuf, rxbuf, txlen, rxlen); -+ kfree(txbuf); -+ -+ return ret; -+} -+ -+static int mtk_snfi_init(struct mtk_snfi *snfi) -+{ -+ int ret; -+ -+ /* Reset the state machine and data FIFO */ -+ ret = mtk_snfi_reset(snfi); -+ if (ret) { -+ dev_warn(snfi->dev, "MTK reset controller fail\n"); -+ return ret; -+ } -+ -+ snfi->buffer = devm_kzalloc(snfi->dev, 4096 + 256, GFP_KERNEL); -+ if (!snfi->buffer) -+ return -ENOMEM; -+ -+ /* Clear interrupt, read clear. */ -+ readw(snfi->regs + NFI_INTR_STA); -+ writew(0, snfi->regs + NFI_INTR_EN); -+ -+ writel(0, snfi->regs + NFI_CON); -+ writel(0, snfi->regs + NFI_CNFG); -+ -+ /* Change to NFI_SPI mode. */ -+ writel(SNFI_MODE_EN, snfi->regs + SNFI_CNFG); -+ -+ return 0; -+} -+ -+static int mtk_snfi_check_buswidth(u8 width) -+{ -+ switch (width) { -+ case 1: -+ case 2: -+ case 4: -+ return 0; -+ -+ default: -+ break; -+ } -+ -+ return -ENOTSUPP; -+} -+ -+static bool mtk_snfi_supports_op(struct spi_mem *mem, -+ const struct spi_mem_op *op) -+{ -+ int ret = 0; -+ -+ /* For MTK Spi Nand controller, cmd buswidth just support 1 bit*/ -+ if (op->cmd.buswidth != 1) -+ ret = -ENOTSUPP; -+ -+ if (op->addr.nbytes) -+ ret |= mtk_snfi_check_buswidth(op->addr.buswidth); -+ -+ if (op->dummy.nbytes) -+ ret |= mtk_snfi_check_buswidth(op->dummy.buswidth); -+ -+ if (op->data.nbytes) -+ ret |= mtk_snfi_check_buswidth(op->data.buswidth); -+ -+ if (ret) -+ return false; -+ -+ return true; -+} -+ -+static const struct spi_controller_mem_ops mtk_snfi_ops = { -+ .supports_op = mtk_snfi_supports_op, -+ .exec_op = mtk_snfi_exec_op, -+}; -+ -+static const struct mtk_snfi_caps snfi_mt7622 = { -+ .spare_size = spare_size_mt7622, -+ .num_spare_size = 4, -+ .nand_sec_size = 512, -+ .nand_fdm_size = 8, -+ .nand_fdm_ecc_size = 1, -+ .ecc_parity_bits = 13, -+ .pageformat_spare_shift = 4, -+ .bad_mark_swap = 0, -+}; -+ -+static const struct mtk_snfi_caps snfi_mt7629 = { -+ .spare_size = spare_size_mt7622, -+ .num_spare_size = 4, -+ .nand_sec_size = 512, -+ .nand_fdm_size = 8, -+ .nand_fdm_ecc_size = 1, -+ .ecc_parity_bits = 13, -+ .pageformat_spare_shift = 4, -+ .bad_mark_swap = 1, -+}; -+ -+static const struct of_device_id mtk_snfi_id_table[] = { -+ { .compatible = "mediatek,mt7622-snfi", .data = &snfi_mt7622, }, -+ { .compatible = "mediatek,mt7629-snfi", .data = &snfi_mt7629, }, -+ { /* sentinel */ } -+}; -+ -+static int mtk_snfi_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct device_node *np = dev->of_node; -+ struct spi_controller *ctlr; -+ struct mtk_snfi *snfi; -+ struct resource *res; -+ int ret = 0, irq; -+ -+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*snfi)); -+ if (!ctlr) -+ return -ENOMEM; -+ -+ snfi = spi_controller_get_devdata(ctlr); -+ snfi->caps = of_device_get_match_data(dev); -+ snfi->dev = dev; -+ -+ snfi->ecc = of_mtk_ecc_get(np); -+ if (IS_ERR_OR_NULL(snfi->ecc)) -+ goto err_put_master; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ snfi->regs = devm_ioremap_resource(dev, res); -+ if (IS_ERR(snfi->regs)) { -+ ret = PTR_ERR(snfi->regs); -+ goto release_ecc; -+ } -+ -+ /* find the clocks */ -+ snfi->clk.nfi_clk = devm_clk_get(dev, "nfi_clk"); -+ if (IS_ERR(snfi->clk.nfi_clk)) { -+ dev_err(dev, "no nfi clk\n"); -+ ret = PTR_ERR(snfi->clk.nfi_clk); -+ goto release_ecc; -+ } -+ -+ snfi->clk.spi_clk = devm_clk_get(dev, "spi_clk"); -+ if (IS_ERR(snfi->clk.spi_clk)) { -+ dev_err(dev, "no spi clk\n"); -+ ret = PTR_ERR(snfi->clk.spi_clk); -+ goto release_ecc; -+ } -+ -+ ret = mtk_snfi_enable_clk(dev, &snfi->clk); -+ if (ret) -+ goto release_ecc; -+ -+ /* find the irq */ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(dev, "no snfi irq resource\n"); -+ ret = -EINVAL; -+ goto clk_disable; -+ } -+ -+ ret = devm_request_irq(dev, irq, mtk_snfi_irq, 0, "mtk-snfi", snfi); -+ if (ret) { -+ dev_err(dev, "failed to request snfi irq\n"); -+ goto clk_disable; -+ } -+ -+ ret = dma_set_mask(dev, DMA_BIT_MASK(32)); -+ if (ret) { -+ dev_err(dev, "failed to set dma mask\n"); -+ goto clk_disable; -+ } -+ -+ ctlr->dev.of_node = np; -+ ctlr->mem_ops = &mtk_snfi_ops; -+ -+ platform_set_drvdata(pdev, snfi); -+ ret = mtk_snfi_init(snfi); -+ if (ret) { -+ dev_err(dev, "failed to init snfi\n"); -+ goto clk_disable; -+ } -+ -+ ret = devm_spi_register_master(dev, ctlr); -+ if (ret) -+ goto clk_disable; -+ -+ return 0; -+ -+clk_disable: -+ mtk_snfi_disable_clk(&snfi->clk); -+ -+release_ecc: -+ mtk_ecc_release(snfi->ecc); -+ -+err_put_master: -+ spi_master_put(ctlr); -+ -+ dev_err(dev, "MediaTek SPI NAND interface probe failed %d\n", ret); -+ return ret; -+} -+ -+static int mtk_snfi_remove(struct platform_device *pdev) -+{ -+ struct mtk_snfi *snfi = platform_get_drvdata(pdev); -+ -+ mtk_snfi_disable_clk(&snfi->clk); -+ -+ return 0; -+} -+ -+static int mtk_snfi_suspend(struct platform_device *pdev, pm_message_t state) -+{ -+ struct mtk_snfi *snfi = platform_get_drvdata(pdev); -+ -+ mtk_snfi_disable_clk(&snfi->clk); -+ -+ return 0; -+} -+ -+static int mtk_snfi_resume(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct mtk_snfi *snfi = dev_get_drvdata(dev); -+ int ret; -+ -+ ret = mtk_snfi_enable_clk(dev, &snfi->clk); -+ if (ret) -+ return ret; -+ -+ ret = mtk_snfi_init(snfi); -+ if (ret) -+ dev_err(dev, "failed to init snfi controller\n"); -+ -+ return ret; -+} -+ -+static struct platform_driver mtk_snfi_driver = { -+ .driver = { -+ .name = "mtk-snfi", -+ .of_match_table = mtk_snfi_id_table, -+ }, -+ .probe = mtk_snfi_probe, -+ .remove = mtk_snfi_remove, -+ .suspend = mtk_snfi_suspend, -+ .resume = mtk_snfi_resume, -+}; -+ -+module_platform_driver(mtk_snfi_driver); -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_AUTHOR("Xiangsheng Hou "); -+MODULE_DESCRIPTION("Mediatek SPI Memory Interface Driver"); diff --git a/target/linux/mediatek/patches-5.4/0307-dts-mt7629-add-snand-support.patch b/target/linux/mediatek/patches-5.4/0307-dts-mt7629-add-snand-support.patch deleted file mode 100644 index 233face4c5..0000000000 --- a/target/linux/mediatek/patches-5.4/0307-dts-mt7629-add-snand-support.patch +++ /dev/null @@ -1,97 +0,0 @@ -From c813fbe806257c574240770ef716fbee19f7dbfa Mon Sep 17 00:00:00 2001 -From: Xiangsheng Hou -Date: Thu, 6 Jun 2019 16:29:04 +0800 -Subject: [PATCH] spi: spi-mem: Mediatek: Add SPI Nand support for MT7629 - -Signed-off-by: Xiangsheng Hou ---- - arch/arm/boot/dts/mt7629-rfb.dts | 45 ++++++++++++++++++++++++++++++++ - arch/arm/boot/dts/mt7629.dtsi | 22 ++++++++++++++++ - 3 files changed, 79 insertions(+) - ---- a/arch/arm/boot/dts/mt7629.dtsi -+++ b/arch/arm/boot/dts/mt7629.dtsi -@@ -258,6 +258,28 @@ - status = "disabled"; - }; - -+ bch: ecc@1100e000 { -+ compatible = "mediatek,mt7622-ecc"; -+ reg = <0x1100e000 0x1000>; -+ interrupts = ; -+ clocks = <&pericfg CLK_PERI_NFIECC_PD>; -+ clock-names = "nfiecc_clk"; -+ status = "disabled"; -+ }; -+ -+ snfi: spi@1100d000 { -+ compatible = "mediatek,mt7629-snfi"; -+ reg = <0x1100d000 0x1000>; -+ interrupts = ; -+ clocks = <&pericfg CLK_PERI_NFI_PD>, -+ <&pericfg CLK_PERI_SNFI_PD>; -+ clock-names = "nfi_clk", "spi_clk"; -+ ecc-engine = <&bch>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ - spi: spi@1100a000 { - compatible = "mediatek,mt7629-spi", - "mediatek,mt7622-spi"; ---- a/arch/arm/boot/dts/mt7629-rfb.dts -+++ b/arch/arm/boot/dts/mt7629-rfb.dts -@@ -281,6 +281,52 @@ - }; - }; - -+&bch { -+ status = "okay"; -+}; -+ -+&snfi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&serial_nand_pins>; -+ status = "okay"; -+ -+ spi_nand@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "spi-nand"; -+ spi-max-frequency = <104000000>; -+ reg = <0>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "Bootloader"; -+ reg = <0x00000 0x0100000>; -+ read-only; -+ }; -+ -+ partition@100000 { -+ label = "Config"; -+ reg = <0x100000 0x0040000>; -+ }; -+ -+ partition@140000 { -+ label = "factory"; -+ reg = <0x140000 0x0080000>; -+ }; -+ -+ partition@1c0000 { -+ label = "firmware"; -+ reg = <0x1c0000 0x1000000>; -+ }; -+ -+ }; -+ }; -+}; -+ - &spi { - pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>; diff --git a/target/linux/mediatek/patches-5.4/0308-dts-mt7622-add-snand-support.patch b/target/linux/mediatek/patches-5.4/0308-dts-mt7622-add-snand-support.patch deleted file mode 100644 index b287780d6c..0000000000 --- a/target/linux/mediatek/patches-5.4/0308-dts-mt7622-add-snand-support.patch +++ /dev/null @@ -1,96 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -554,6 +554,19 @@ - status = "disabled"; - }; - -+ snfi: spi@1100d000 { -+ compatible = "mediatek,mt7622-snfi"; -+ reg = <0 0x1100d000 0 0x1000>; -+ interrupts = ; -+ clocks = <&pericfg CLK_PERI_NFI_PD>, -+ <&pericfg CLK_PERI_SNFI_PD>; -+ clock-names = "nfi_clk", "spi_clk"; -+ ecc-engine = <&bch>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ - nor_flash: spi@11014000 { - compatible = "mediatek,mt7622-nor", - "mediatek,mt8173-nor"; ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -99,7 +99,7 @@ - }; - - &bch { -- status = "disabled"; -+ status = "okay"; - }; - - &btif { -@@ -551,6 +551,62 @@ - status = "disable"; - }; - -+&snfi { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&serial_nand_pins>; -+ status = "okay"; -+ -+ spi_nand@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "spi-nand"; -+ spi-max-frequency = <104000000>; -+ reg = <0>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "Preloader"; -+ reg = <0x00000 0x0080000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "ATF"; -+ reg = <0x80000 0x0040000>; -+ }; -+ -+ partition@c0000 { -+ label = "Bootloader"; -+ reg = <0xc0000 0x0080000>; -+ }; -+ -+ partition@140000 { -+ label = "Config"; -+ reg = <0x140000 0x0080000>; -+ }; -+ -+ partition@1c0000 { -+ label = "Factory"; -+ reg = <0x1c0000 0x0040000>; -+ }; -+ -+ partition@200000 { -+ label = "firmware"; -+ reg = <0x200000 0x2000000>; -+ }; -+ -+ partition@2200000 { -+ label = "User_data"; -+ reg = <0x2200000 0x4000000>; -+ }; -+ }; -+ }; -+}; -+ - &spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spic0_pins>; diff --git a/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch b/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch deleted file mode 100644 index 84aed89752..0000000000 --- a/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch +++ /dev/null @@ -1,40 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -716,6 +716,17 @@ - status = "disabled"; - }; - -+ wmac: wmac@18000000 { -+ compatible = "mediatek,mt7622-wmac"; -+ reg = <0 0x18000000 0 0x100000>; -+ interrupts = ; -+ -+ mediatek,infracfg = <&infracfg>; -+ status = "disabled"; -+ -+ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>; -+ }; -+ - ssusbsys: ssusbsys@1a000000 { - compatible = "mediatek,mt7622-ssusbsys", - "syscon"; ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -589,7 +589,7 @@ - reg = <0x140000 0x0080000>; - }; - -- partition@1c0000 { -+ factory: partition@1c0000 { - label = "Factory"; - reg = <0x1c0000 0x0040000>; - }; -@@ -646,3 +646,8 @@ - pinctrl-0 = <&watchdog_pins>; - status = "okay"; - }; -+ -+&wmac { -+ mediatek,mtd-eeprom = <&factory 0x0000>; -+ status = "okay"; -+}; diff --git a/target/linux/mediatek/patches-5.4/0310-mtk-bmt-support.patch b/target/linux/mediatek/patches-5.4/0310-mtk-bmt-support.patch deleted file mode 100644 index 4cef9f9d5e..0000000000 --- a/target/linux/mediatek/patches-5.4/0310-mtk-bmt-support.patch +++ /dev/null @@ -1,837 +0,0 @@ ---- a/drivers/mtd/nand/Kconfig -+++ b/drivers/mtd/nand/Kconfig -@@ -5,3 +5,7 @@ config MTD_NAND_CORE - source "drivers/mtd/nand/onenand/Kconfig" - source "drivers/mtd/nand/raw/Kconfig" - source "drivers/mtd/nand/spi/Kconfig" -+ -+config MTD_NAND_MTK_BMT -+ bool "Support MediaTek NAND Bad-block Management Table" -+ default n ---- a/drivers/mtd/nand/Makefile -+++ b/drivers/mtd/nand/Makefile -@@ -2,6 +2,7 @@ - - nandcore-objs := core.o bbt.o - obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o -+obj-$(CONFIG_MTD_NAND_MTK_BMT) += mtk_bmt.o - - obj-y += onenand/ - obj-y += raw/ ---- /dev/null -+++ b/drivers/mtd/nand/mtk_bmt.c -@@ -0,0 +1,766 @@ -+/* -+ * Copyright (c) 2017 MediaTek Inc. -+ * Author: Xiangsheng Hou -+ * Copyright (c) 2020 Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define MAIN_SIGNATURE_OFFSET 0 -+#define OOB_SIGNATURE_OFFSET 1 -+#define BBPOOL_RATIO 2 -+ -+#define BBT_LOG(fmt, ...) pr_debug("[BBT][%s|%d] "fmt"\n", __func__, __LINE__, ##__VA_ARGS__) -+ -+/* Maximum 8k blocks */ -+#define BB_TABLE_MAX 0x2000U -+#define BMT_TABLE_MAX (BB_TABLE_MAX * BBPOOL_RATIO / 100) -+#define BMT_TBL_DEF_VAL 0x0 -+ -+/* -+ * Burner Bad Block Table -+ * --------- Only support SLC Nand Chips!!!!!!!!!!! ---------- -+ */ -+ -+struct bbbt { -+ char signature[3]; -+ /* This version is used to distinguish the legacy and new algorithm */ -+#define BBMT_VERSION 2 -+ unsigned char version; -+ /* Below 2 tables will be written in SLC */ -+ u16 bb_tbl[BB_TABLE_MAX]; -+ struct bbmt { -+ u16 block; -+#define NO_MAPPED 0 -+#define NORMAL_MAPPED 1 -+#define BMT_MAPPED 2 -+ u16 mapped; -+ } bmt_tbl[BMT_TABLE_MAX]; -+}; -+ -+static struct bmt_desc { -+ struct mtd_info *mtd; -+ -+ int (*_read_oob) (struct mtd_info *mtd, loff_t from, -+ struct mtd_oob_ops *ops); -+ int (*_write_oob) (struct mtd_info *mtd, loff_t to, -+ struct mtd_oob_ops *ops); -+ const struct nand_ops *nand_ops; -+ -+ struct bbbt *bbt; -+ -+ struct dentry *debugfs_dir; -+ -+ u32 pg_size; -+ u32 blk_size; -+ u16 pg_shift; -+ u16 blk_shift; -+ /* bbt logical address */ -+ u16 pool_lba; -+ /* bbt physical address */ -+ u16 pool_pba; -+ /* Maximum count of bad blocks that the vendor guaranteed */ -+ u16 bb_max; -+ /* Total blocks of the Nand Chip */ -+ u16 total_blks; -+ /* The block(n) BMT is located at (bmt_tbl[n]) */ -+ u16 bmt_blk_idx; -+ /* How many pages needs to store 'struct bbbt' */ -+ u32 bmt_pgs; -+ -+ /* to compensate for driver level remapping */ -+ u8 oob_offset; -+} bmtd = {0}; -+ -+static unsigned char *nand_bbt_buf; -+static unsigned char *nand_data_buf; -+ -+/* -------- Unit conversions -------- */ -+static inline u32 blk_pg(u16 block) -+{ -+ return (u32)(block << (bmtd.blk_shift - bmtd.pg_shift)); -+} -+ -+/* -------- Nand operations wrapper -------- */ -+static inline int -+bbt_nand_read(u32 page, unsigned char *dat, int dat_len, -+ unsigned char *fdm, int fdm_len) -+{ -+ struct mtd_oob_ops ops = { -+ .mode = MTD_OPS_PLACE_OOB, -+ .ooboffs = bmtd.oob_offset, -+ .oobbuf = fdm, -+ .ooblen = fdm_len, -+ .datbuf = dat, -+ .len = dat_len, -+ }; -+ -+ return bmtd._read_oob(bmtd.mtd, page << bmtd.pg_shift, &ops); -+} -+ -+static inline int bbt_nand_erase(u16 block) -+{ -+ struct nand_device *nand = mtd_to_nanddev(bmtd.mtd); -+ loff_t addr = (loff_t)block << bmtd.blk_shift; -+ struct nand_pos pos; -+ -+ nanddev_offs_to_pos(nand, addr, &pos); -+ return bmtd.nand_ops->erase(nand, &pos); -+} -+ -+/* -------- Bad Blocks Management -------- */ -+static int -+read_bmt(u16 block, unsigned char *dat, unsigned char *fdm, int fdm_len) -+{ -+ u32 len = bmtd.bmt_pgs << bmtd.pg_shift; -+ -+ return bbt_nand_read(blk_pg(block), dat, len, fdm, fdm_len); -+} -+ -+static int write_bmt(u16 block, unsigned char *dat) -+{ -+ struct mtd_oob_ops ops = { -+ .mode = MTD_OPS_PLACE_OOB, -+ .ooboffs = OOB_SIGNATURE_OFFSET + bmtd.oob_offset, -+ .oobbuf = "bmt", -+ .ooblen = 3, -+ .datbuf = dat, -+ .len = bmtd.bmt_pgs << bmtd.pg_shift, -+ }; -+ loff_t addr = (loff_t)block << bmtd.blk_shift; -+ -+ return bmtd._write_oob(bmtd.mtd, addr, &ops); -+} -+ -+static u16 find_valid_block(u16 block) -+{ -+ u8 fdm[4]; -+ int ret; -+ int loop = 0; -+ -+retry: -+ if (block >= bmtd.total_blks) -+ return 0; -+ -+ ret = bbt_nand_read(blk_pg(block), nand_data_buf, bmtd.pg_size, -+ fdm, sizeof(fdm)); -+ /* Read the 1st byte of FDM to judge whether it's a bad -+ * or not -+ */ -+ if (ret || fdm[0] != 0xff) { -+ pr_info("nand: found bad block 0x%x\n", block); -+ if (loop >= bmtd.bb_max) { -+ pr_info("nand: FATAL ERR: too many bad blocks!!\n"); -+ return 0; -+ } -+ -+ loop++; -+ block++; -+ goto retry; -+ } -+ -+ return block; -+} -+ -+/* Find out all bad blocks, and fill in the mapping table */ -+static int scan_bad_blocks(struct bbbt *bbt) -+{ -+ int i; -+ u16 block = 0; -+ -+ /* First time download, the block0 MUST NOT be a bad block, -+ * this is guaranteed by vendor -+ */ -+ bbt->bb_tbl[0] = 0; -+ -+ /* -+ * Construct the mapping table of Normal data area(non-PMT/BMTPOOL) -+ * G - Good block; B - Bad block -+ * --------------------------- -+ * physical |G|G|B|G|B|B|G|G|G|G|B|G|B| -+ * --------------------------- -+ * What bb_tbl[i] looks like: -+ * physical block(i): -+ * 0 1 2 3 4 5 6 7 8 9 a b c -+ * mapped block(bb_tbl[i]): -+ * 0 1 3 6 7 8 9 b ...... -+ * ATTENTION: -+ * If new bad block ocurred(n), search bmt_tbl to find -+ * a available block(x), and fill in the bb_tbl[n] = x; -+ */ -+ for (i = 1; i < bmtd.pool_lba; i++) { -+ bbt->bb_tbl[i] = find_valid_block(bbt->bb_tbl[i - 1] + 1); -+ BBT_LOG("bb_tbl[0x%x] = 0x%x", i, bbt->bb_tbl[i]); -+ if (bbt->bb_tbl[i] == 0) -+ return -1; -+ } -+ -+ /* Physical Block start Address of BMT pool */ -+ bmtd.pool_pba = bbt->bb_tbl[i - 1] + 1; -+ if (bmtd.pool_pba >= bmtd.total_blks - 2) { -+ pr_info("nand: FATAL ERR: Too many bad blocks!!\n"); -+ return -1; -+ } -+ -+ BBT_LOG("pool_pba=0x%x", bmtd.pool_pba); -+ i = 0; -+ block = bmtd.pool_pba; -+ /* -+ * The bmt table is used for runtime bad block mapping -+ * G - Good block; B - Bad block -+ * --------------------------- -+ * physical |G|G|B|G|B|B|G|G|G|G|B|G|B| -+ * --------------------------- -+ * block: 0 1 2 3 4 5 6 7 8 9 a b c -+ * What bmt_tbl[i] looks like in initial state: -+ * i: -+ * 0 1 2 3 4 5 6 7 -+ * bmt_tbl[i].block: -+ * 0 1 3 6 7 8 9 b -+ * bmt_tbl[i].mapped: -+ * N N N N N N N B -+ * N - Not mapped(Available) -+ * M - Mapped -+ * B - BMT -+ * ATTENTION: -+ * BMT always in the last valid block in pool -+ */ -+ while ((block = find_valid_block(block)) != 0) { -+ bbt->bmt_tbl[i].block = block; -+ bbt->bmt_tbl[i].mapped = NO_MAPPED; -+ BBT_LOG("bmt_tbl[%d].block = 0x%x", i, block); -+ block++; -+ i++; -+ } -+ -+ /* i - How many available blocks in pool, which is the length of bmt_tbl[] -+ * bmtd.bmt_blk_idx - bmt_tbl[bmtd.bmt_blk_idx].block => the BMT block -+ */ -+ bmtd.bmt_blk_idx = i - 1; -+ bbt->bmt_tbl[bmtd.bmt_blk_idx].mapped = BMT_MAPPED; -+ -+ if (i < 1) { -+ pr_info("nand: FATAL ERR: no space to store BMT!!\n"); -+ return -1; -+ } -+ -+ pr_info("[BBT] %d available blocks in BMT pool\n", i); -+ -+ return 0; -+} -+ -+static bool is_valid_bmt(unsigned char *buf, unsigned char *fdm) -+{ -+ struct bbbt *bbt = (struct bbbt *)buf; -+ u8 *sig = (u8*)bbt->signature + MAIN_SIGNATURE_OFFSET; -+ -+ -+ if (memcmp(bbt->signature + MAIN_SIGNATURE_OFFSET, "BMT", 3) == 0 && -+ memcmp(fdm + OOB_SIGNATURE_OFFSET, "bmt", 3) == 0) { -+ if (bbt->version == BBMT_VERSION) -+ return true; -+ } -+ BBT_LOG("[BBT] BMT Version not match,upgrage preloader and uboot please! sig=%02x%02x%02x, fdm=%02x%02x%02x", -+ sig[0], sig[1], sig[2], -+ fdm[1], fdm[2], fdm[3]); -+ return false; -+} -+ -+static u16 get_bmt_index(struct bbmt *bmt) -+{ -+ int i = 0; -+ -+ while (bmt[i].block != BMT_TBL_DEF_VAL) { -+ if (bmt[i].mapped == BMT_MAPPED) -+ return i; -+ i++; -+ } -+ return 0; -+} -+ -+static struct bbbt *scan_bmt(u16 block) -+{ -+ u8 fdm[4]; -+ -+ if (block < bmtd.pool_lba) -+ return NULL; -+ -+ if (read_bmt(block, nand_bbt_buf, fdm, sizeof(fdm))) -+ return scan_bmt(block - 1); -+ -+ if (is_valid_bmt(nand_bbt_buf, fdm)) { -+ bmtd.bmt_blk_idx = get_bmt_index(((struct bbbt *)nand_bbt_buf)->bmt_tbl); -+ if (bmtd.bmt_blk_idx == 0) { -+ pr_info("[BBT] FATAL ERR: bmt block index is wrong!\n"); -+ return NULL; -+ } -+ pr_info("[BBT] BMT.v2 is found at 0x%x\n", block); -+ return (struct bbbt *)nand_bbt_buf; -+ } else -+ return scan_bmt(block - 1); -+} -+ -+/* Write the Burner Bad Block Table to Nand Flash -+ * n - write BMT to bmt_tbl[n] -+ */ -+static u16 upload_bmt(struct bbbt *bbt, int n) -+{ -+ u16 block; -+ -+retry: -+ if (n < 0 || bbt->bmt_tbl[n].mapped == NORMAL_MAPPED) { -+ pr_info("nand: FATAL ERR: no space to store BMT!\n"); -+ return (u16)-1; -+ } -+ -+ block = bbt->bmt_tbl[n].block; -+ BBT_LOG("n = 0x%x, block = 0x%x", n, block); -+ if (bbt_nand_erase(block)) { -+ bbt->bmt_tbl[n].block = 0; -+ /* erase failed, try the previous block: bmt_tbl[n - 1].block */ -+ n--; -+ goto retry; -+ } -+ -+ /* The signature offset is fixed set to 0, -+ * oob signature offset is fixed set to 1 -+ */ -+ memcpy(bbt->signature + MAIN_SIGNATURE_OFFSET, "BMT", 3); -+ bbt->version = BBMT_VERSION; -+ -+ if (write_bmt(block, (unsigned char *)bbt)) { -+ bbt->bmt_tbl[n].block = 0; -+ -+ /* write failed, try the previous block in bmt_tbl[n - 1] */ -+ n--; -+ goto retry; -+ } -+ -+ /* Return the current index(n) of BMT pool (bmt_tbl[n]) */ -+ return n; -+} -+ -+static u16 find_valid_block_in_pool(struct bbbt *bbt) -+{ -+ int i; -+ -+ if (bmtd.bmt_blk_idx == 0) -+ goto error; -+ -+ for (i = 0; i < bmtd.bmt_blk_idx; i++) { -+ if (bbt->bmt_tbl[i].block != 0 && bbt->bmt_tbl[i].mapped == NO_MAPPED) { -+ bbt->bmt_tbl[i].mapped = NORMAL_MAPPED; -+ return bbt->bmt_tbl[i].block; -+ } -+ } -+ -+error: -+ pr_info("nand: FATAL ERR: BMT pool is run out!\n"); -+ return 0; -+} -+ -+/* We met a bad block, mark it as bad and map it to a valid block in pool, -+ * if it's a write failure, we need to write the data to mapped block -+ */ -+static bool update_bmt(u16 block) -+{ -+ u16 mapped_blk; -+ struct bbbt *bbt; -+ -+ bbt = bmtd.bbt; -+ mapped_blk = find_valid_block_in_pool(bbt); -+ if (mapped_blk == 0) -+ return false; -+ -+ /* Map new bad block to available block in pool */ -+ bbt->bb_tbl[block] = mapped_blk; -+ bmtd.bmt_blk_idx = upload_bmt(bbt, bmtd.bmt_blk_idx); -+ -+ return true; -+} -+ -+u16 get_mapping_block_index(int block) -+{ -+ int mapping_block; -+ -+ if (block < bmtd.pool_lba) -+ mapping_block = bmtd.bbt->bb_tbl[block]; -+ else -+ mapping_block = block; -+ BBT_LOG("0x%x mapped to 0x%x", block, mapping_block); -+ -+ return mapping_block; -+} -+ -+static int -+mtk_bmt_read(struct mtd_info *mtd, loff_t from, -+ struct mtd_oob_ops *ops) -+{ -+ struct mtd_oob_ops cur_ops = *ops; -+ int retry_count = 0; -+ loff_t cur_from; -+ int ret; -+ -+ ops->retlen = 0; -+ ops->oobretlen = 0; -+ -+ while (ops->retlen < ops->len || ops->oobretlen < ops->ooblen) { -+ u32 offset = from & (bmtd.blk_size - 1); -+ u32 block = from >> bmtd.blk_shift; -+ u32 cur_block; -+ -+ cur_block = get_mapping_block_index(block); -+ cur_from = ((loff_t)cur_block << bmtd.blk_shift) + offset; -+ -+ cur_ops.oobretlen = 0; -+ cur_ops.retlen = 0; -+ cur_ops.len = min_t(u32, mtd->erasesize - offset, -+ ops->len - ops->retlen); -+ ret = bmtd._read_oob(mtd, cur_from, &cur_ops); -+ if (ret < 0) { -+ update_bmt(block); -+ if (retry_count++ < 10) -+ continue; -+ -+ return ret; -+ } -+ -+ ops->retlen += cur_ops.retlen; -+ ops->oobretlen += cur_ops.oobretlen; -+ -+ cur_ops.datbuf += cur_ops.retlen; -+ cur_ops.oobbuf += cur_ops.oobretlen; -+ cur_ops.ooblen -= cur_ops.oobretlen; -+ -+ if (!cur_ops.len) -+ cur_ops.len = mtd->erasesize - offset; -+ -+ from += cur_ops.len; -+ retry_count = 0; -+ } -+ -+ return 0; -+} -+ -+static int -+mtk_bmt_write(struct mtd_info *mtd, loff_t to, -+ struct mtd_oob_ops *ops) -+{ -+ struct mtd_oob_ops cur_ops = *ops; -+ int retry_count = 0; -+ loff_t cur_to; -+ int ret; -+ -+ ops->retlen = 0; -+ ops->oobretlen = 0; -+ -+ while (ops->retlen < ops->len || ops->oobretlen < ops->ooblen) { -+ u32 offset = to & (bmtd.blk_size - 1); -+ u32 block = to >> bmtd.blk_shift; -+ u32 cur_block; -+ -+ cur_block = get_mapping_block_index(block); -+ cur_to = ((loff_t)cur_block << bmtd.blk_shift) + offset; -+ -+ cur_ops.oobretlen = 0; -+ cur_ops.retlen = 0; -+ cur_ops.len = min_t(u32, bmtd.blk_size - offset, -+ ops->len - ops->retlen); -+ ret = bmtd._write_oob(mtd, cur_to, &cur_ops); -+ if (ret < 0) { -+ update_bmt(block); -+ if (retry_count++ < 10) -+ continue; -+ -+ return ret; -+ } -+ -+ ops->retlen += cur_ops.retlen; -+ ops->oobretlen += cur_ops.oobretlen; -+ -+ cur_ops.datbuf += cur_ops.retlen; -+ cur_ops.oobbuf += cur_ops.oobretlen; -+ cur_ops.ooblen -= cur_ops.oobretlen; -+ -+ if (!cur_ops.len) -+ cur_ops.len = mtd->erasesize - offset; -+ -+ to += cur_ops.len; -+ retry_count = 0; -+ } -+ -+ return 0; -+} -+ -+ -+ -+static int -+mtk_bmt_erase(struct nand_device *nand, const struct nand_pos *pos) -+{ -+ struct nand_pos new_pos = *pos; -+ int retry_count = 0; -+ int ret; -+ -+retry: -+ new_pos.eraseblock = get_mapping_block_index(pos->eraseblock); -+ -+ ret = bmtd.nand_ops->erase(nand, &new_pos); -+ if (ret) { -+ update_bmt(pos->eraseblock); -+ if (retry_count++ < 10) -+ goto retry; -+ } -+ -+ return ret; -+} -+ -+static bool -+mtk_bmt_isbad(struct nand_device *nand, const struct nand_pos *pos) -+{ -+ struct nand_pos new_pos = *pos; -+ int retry_count = 0; -+ bool ret; -+ -+retry: -+ new_pos.eraseblock = get_mapping_block_index(pos->eraseblock); -+ -+ ret = bmtd.nand_ops->isbad(nand, &new_pos); -+ if (ret) { -+ update_bmt(pos->eraseblock); -+ if (retry_count++ < 10) -+ goto retry; -+ } -+ -+ return ret; -+} -+ -+static int -+mtk_bmt_markbad(struct nand_device *nand, const struct nand_pos *pos) -+{ -+ struct nand_pos new_pos = *pos; -+ -+ new_pos.eraseblock = get_mapping_block_index(new_pos.eraseblock); -+ update_bmt(pos->eraseblock); -+ -+ return bmtd.nand_ops->markbad(nand, &new_pos); -+} -+ -+static void -+mtk_bmt_replace_ops(struct mtd_info *mtd) -+{ -+ static const struct nand_ops mtk_bmt_nand_ops = { -+ .erase = mtk_bmt_erase, -+ .isbad = mtk_bmt_isbad, -+ .markbad = mtk_bmt_markbad, -+ }; -+ struct nand_device *nand = mtd_to_nanddev(mtd); -+ -+ bmtd.nand_ops = nand->ops; -+ bmtd._read_oob = mtd->_read_oob; -+ bmtd._write_oob = mtd->_write_oob; -+ -+ mtd->_read_oob = mtk_bmt_read; -+ mtd->_write_oob = mtk_bmt_write; -+ nand->ops = &mtk_bmt_nand_ops; -+} -+ -+static int mtk_bmt_debug_mark_good(void *data, u64 val) -+{ -+ u32 block = val >> bmtd.blk_shift; -+ -+ bmtd.bbt->bb_tbl[block] = block; -+ bmtd.bmt_blk_idx = upload_bmt(bmtd.bbt, bmtd.bmt_blk_idx); -+ -+ return 0; -+} -+ -+static int mtk_bmt_debug_mark_bad(void *data, u64 val) -+{ -+ u32 block = val >> bmtd.blk_shift; -+ -+ update_bmt(block); -+ -+ return 0; -+} -+ -+DEFINE_DEBUGFS_ATTRIBUTE(fops_mark_good, NULL, mtk_bmt_debug_mark_good, "%llu\n"); -+DEFINE_DEBUGFS_ATTRIBUTE(fops_mark_bad, NULL, mtk_bmt_debug_mark_bad, "%llu\n"); -+ -+static void -+mtk_bmt_add_debugfs(void) -+{ -+ struct dentry *dir; -+ -+ dir = bmtd.debugfs_dir = debugfs_create_dir("mtk-bmt", NULL); -+ if (!dir) -+ return; -+ -+ debugfs_create_file_unsafe("mark_good", S_IWUSR, dir, NULL, &fops_mark_good); -+ debugfs_create_file_unsafe("mark_bad", S_IWUSR, dir, NULL, &fops_mark_bad); -+} -+ -+void mtk_bmt_detach(struct mtd_info *mtd) -+{ -+ struct nand_device *nand = mtd_to_nanddev(mtd); -+ -+ if (bmtd.mtd != mtd) -+ return; -+ -+ if (bmtd.debugfs_dir) -+ debugfs_remove_recursive(bmtd.debugfs_dir); -+ bmtd.debugfs_dir = NULL; -+ -+ kfree(nand_bbt_buf); -+ kfree(nand_data_buf); -+ -+ mtd->_read_oob = bmtd._read_oob; -+ mtd->_write_oob = bmtd._write_oob; -+ mtd->size = bmtd.total_blks << bmtd.blk_shift; -+ nand->ops = bmtd.nand_ops; -+ -+ memset(&bmtd, 0, sizeof(bmtd)); -+} -+ -+/* total_blocks - The total count of blocks that the Nand Chip has */ -+int mtk_bmt_attach(struct mtd_info *mtd) -+{ -+ struct device_node *np; -+ struct bbbt *bbt; -+ u32 bufsz; -+ u32 block; -+ u16 total_blocks, pmt_block; -+ int ret = 0; -+ u32 bmt_pool_size; -+ -+ if (bmtd.mtd) -+ return -ENOSPC; -+ -+ np = mtd_get_of_node(mtd); -+ if (!np) -+ return 0; -+ -+ if (!of_property_read_bool(np, "mediatek,bmt-v2")) -+ return 0; -+ -+ if (of_property_read_u32(np, "mediatek,bmt-pool-size", -+ &bmt_pool_size) != 0) -+ bmt_pool_size = 80; -+ -+ if (of_property_read_u8(np, "mediatek,bmt-oob-offset", -+ &bmtd.oob_offset) != 0) -+ bmtd.oob_offset = 8; -+ -+ bmtd.mtd = mtd; -+ mtk_bmt_replace_ops(mtd); -+ -+ bmtd.blk_size = mtd->erasesize; -+ bmtd.blk_shift = ffs(bmtd.blk_size) - 1; -+ bmtd.pg_size = mtd->writesize; -+ bmtd.pg_shift = ffs(bmtd.pg_size) - 1; -+ total_blocks = mtd->size >> bmtd.blk_shift; -+ pmt_block = total_blocks - bmt_pool_size - 2; -+ -+ mtd->size = pmt_block << bmtd.blk_shift; -+ -+ /* -+ * --------------------------------------- -+ * | PMT(2blks) | BMT POOL(totalblks * 2%) | -+ * --------------------------------------- -+ * ^ ^ -+ * | | -+ * pmt_block pmt_block + 2blocks(pool_lba) -+ * -+ * ATTETION!!!!!! -+ * The blocks ahead of the boundary block are stored in bb_tbl -+ * and blocks behind are stored in bmt_tbl -+ */ -+ -+ bmtd.pool_lba = (u16)(pmt_block + 2); -+ bmtd.total_blks = total_blocks; -+ bmtd.bb_max = bmtd.total_blks * BBPOOL_RATIO / 100; -+ -+ /* 3 buffers we need */ -+ bufsz = round_up(sizeof(struct bbbt), bmtd.pg_size); -+ bmtd.bmt_pgs = bufsz >> bmtd.pg_shift; -+ -+ nand_bbt_buf = kzalloc(bufsz, GFP_KERNEL); -+ nand_data_buf = kzalloc(bmtd.pg_size, GFP_KERNEL); -+ -+ if (!nand_bbt_buf || !nand_data_buf) { -+ pr_info("nand: FATAL ERR: allocate buffer failed!\n"); -+ ret = -1; -+ goto error; -+ } -+ -+ memset(nand_bbt_buf, 0xff, bufsz); -+ memset(nand_data_buf, 0xff, bmtd.pg_size); -+ -+ BBT_LOG("bbtbuf=0x%p(0x%x) dat=0x%p(0x%x)", -+ nand_bbt_buf, bufsz, nand_data_buf, bmtd.pg_size); -+ BBT_LOG("pool_lba=0x%x total_blks=0x%x bb_max=0x%x", -+ bmtd.pool_lba, bmtd.total_blks, bmtd.bb_max); -+ -+ /* Scanning start from the first page of the last block -+ * of whole flash -+ */ -+ bbt = scan_bmt(bmtd.total_blks - 1); -+ if (!bbt) { -+ /* BMT not found */ -+ if (bmtd.total_blks > BB_TABLE_MAX + BMT_TABLE_MAX) { -+ pr_info("nand: FATAL: Too many blocks, can not support!\n"); -+ ret = -1; -+ goto error; -+ } -+ -+ bbt = (struct bbbt *)nand_bbt_buf; -+ memset(bbt->bmt_tbl, BMT_TBL_DEF_VAL, sizeof(bbt->bmt_tbl)); -+ -+ if (scan_bad_blocks(bbt)) { -+ ret = -1; -+ goto error; -+ } -+ -+ /* BMT always in the last valid block in pool */ -+ bmtd.bmt_blk_idx = upload_bmt(bbt, bmtd.bmt_blk_idx); -+ block = bbt->bmt_tbl[bmtd.bmt_blk_idx].block; -+ pr_notice("[BBT] BMT.v2 is written into PBA:0x%x\n", block); -+ -+ if (bmtd.bmt_blk_idx == 0) -+ pr_info("nand: Warning: no available block in BMT pool!\n"); -+ else if (bmtd.bmt_blk_idx == (u16)-1) { -+ ret = -1; -+ goto error; -+ } -+ } -+ mtk_bmt_add_debugfs(); -+ -+ bmtd.bbt = bbt; -+ return 0; -+ -+error: -+ mtk_bmt_detach(mtd); -+ return ret; -+} -+ -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Xiangsheng Hou , Felix Fietkau "); -+MODULE_DESCRIPTION("Bad Block mapping management v2 for MediaTek NAND Flash Driver"); -+ ---- a/drivers/mtd/nand/spi/core.c -+++ b/drivers/mtd/nand/spi/core.c -@@ -18,6 +18,7 @@ - #include - #include - #include -+#include - - static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val) - { -@@ -1100,6 +1101,8 @@ static int spinand_probe(struct spi_mem - if (ret) - return ret; - -+ mtk_bmt_attach(mtd); -+ - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - goto err_spinand_cleanup; -@@ -1125,6 +1128,7 @@ static int spinand_remove(struct spi_mem - if (ret) - return ret; - -+ mtk_bmt_detach(mtd); - spinand_cleanup(spinand); - - return 0; ---- /dev/null -+++ b/include/linux/mtd/mtk_bmt.h -@@ -0,0 +1,18 @@ -+#ifndef __MTK_BMT_H -+#define __MTK_BMT_H -+ -+#ifdef CONFIG_MTD_NAND_MTK_BMT -+int mtk_bmt_attach(struct mtd_info *mtd); -+void mtk_bmt_detach(struct mtd_info *mtd); -+#else -+static inline int mtk_bmt_attach(struct mtd_info *mtd) -+{ -+ return 0; -+} -+ -+static inline void mtk_bmt_detach(struct mtd_info *mtd) -+{ -+} -+#endif -+ -+#endif diff --git a/target/linux/mediatek/patches-5.4/0350-mtd-parsers-trx-Allow-to-specify-trx-magic-in-DT.patch b/target/linux/mediatek/patches-5.4/0350-mtd-parsers-trx-Allow-to-specify-trx-magic-in-DT.patch deleted file mode 100644 index 0446ce9386..0000000000 --- a/target/linux/mediatek/patches-5.4/0350-mtd-parsers-trx-Allow-to-specify-trx-magic-in-DT.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 0600e3d81628002a5cd80cf83ee454851b0063c0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 7 Mar 2021 18:19:26 +0100 -Subject: mtd: parsers: trx: Allow to specify brcm,trx-magic in DT - -Buffalo uses a different TRX magic for every device, to be able to use -this trx parser, make it possible to specify the TRX magic in device -tree. If no TRX magic is specified in device tree, the standard value -will be used. This value should only be specified if a vendor chooses to -use a non standard TRX magic. - -Signed-off-by: Hauke Mehrtens ---- - .../bindings/mtd/partitions/brcm,trx.txt | 5 +++++ - drivers/mtd/parsers/parser_trx.c | 21 ++++++++++++++++++- - 2 files changed, 25 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt -+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,trx.txt -@@ -28,6 +28,11 @@ detected by a software parsing TRX heade - Required properties: - - compatible : (required) must be "brcm,trx" - -+Optional properties: -+ -+- brcm,trx-magic: TRX magic, if it is different from the default magic -+ 0x30524448 as a u32. -+ - Example: - - flash@0 { ---- a/drivers/mtd/parsers/parser_trx.c -+++ b/drivers/mtd/parsers/parser_trx.c -@@ -74,6 +74,24 @@ out_default: - return "rootfs"; - } - -+static uint32_t parser_trx_get_magic(struct mtd_info *mtd) -+{ -+ uint32_t trx_magic = TRX_MAGIC; -+ struct device_node *np; -+ int err; -+ -+ np = mtd_get_of_node(mtd); -+ if (!np) -+ return trx_magic; -+ -+ /* Get different magic from device tree if specified */ -+ err = of_property_read_u32(np, "brcm,trx-magic", &trx_magic); -+ if (err != 0 && err != -EINVAL) -+ pr_err("failed to parse \"brcm,trx-magic\" DT attribute, use default: %d\n", err); -+ -+ return trx_magic; -+} -+ - static int parser_trx_parse(struct mtd_info *mtd, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -83,6 +101,7 @@ static int parser_trx_parse(struct mtd_i - struct trx_header trx; - size_t bytes_read; - uint8_t curr_part = 0, i = 0; -+ uint32_t trx_magic = parser_trx_get_magic(mtd); - int err; - - parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition), -@@ -97,7 +116,7 @@ static int parser_trx_parse(struct mtd_i - return err; - } - -- if (trx.magic != TRX_MAGIC) { -+ if (trx.magic != trx_magic) { - kfree(parts); - return -ENOENT; - } diff --git a/target/linux/mediatek/patches-5.4/0351-mtd-parsers-Remove-dependency-to-BRCM-architectures.patch b/target/linux/mediatek/patches-5.4/0351-mtd-parsers-Remove-dependency-to-BRCM-architectures.patch deleted file mode 100644 index fa94c22304..0000000000 --- a/target/linux/mediatek/patches-5.4/0351-mtd-parsers-Remove-dependency-to-BRCM-architectures.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 63f0cf88ab5461acb0911252f12bb94ee3bf05a2 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 7 Mar 2021 18:23:29 +0100 -Subject: mtd: parsers: Remove dependency to BRCM architectures - -Buffalo uses the TRX partition format also on Mediatek SoCs. - -Signed-off-by: Hauke Mehrtens ---- - drivers/mtd/parsers/Kconfig | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mtd/parsers/Kconfig -+++ b/drivers/mtd/parsers/Kconfig -@@ -131,7 +131,7 @@ config MTD_AFS_PARTS - - config MTD_PARSER_TRX - tristate "Parser for TRX format partitions" -- depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST) -+ depends on MTD - help - TRX is a firmware format used by Broadcom on their devices. It - may contain up to 3/4 partitions (depending on the version). diff --git a/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch b/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch deleted file mode 100644 index 2fae90ef9e..0000000000 --- a/target/linux/mediatek/patches-5.4/0500-v5.6-crypto-backport-inside-secure.patch +++ /dev/null @@ -1,5464 +0,0 @@ ---- a/drivers/crypto/inside-secure/safexcel.c -+++ b/drivers/crypto/inside-secure/safexcel.c -@@ -75,9 +75,9 @@ static void eip197_trc_cache_banksel(str - } - - static u32 eip197_trc_cache_probe(struct safexcel_crypto_priv *priv, -- int maxbanks, u32 probemask) -+ int maxbanks, u32 probemask, u32 stride) - { -- u32 val, addrhi, addrlo, addrmid; -+ u32 val, addrhi, addrlo, addrmid, addralias, delta, marker; - int actbank; - - /* -@@ -87,32 +87,37 @@ static u32 eip197_trc_cache_probe(struct - addrhi = 1 << (16 + maxbanks); - addrlo = 0; - actbank = min(maxbanks - 1, 0); -- while ((addrhi - addrlo) > 32) { -+ while ((addrhi - addrlo) > stride) { - /* write marker to lowest address in top half */ - addrmid = (addrhi + addrlo) >> 1; -+ marker = (addrmid ^ 0xabadbabe) & probemask; /* Unique */ - eip197_trc_cache_banksel(priv, addrmid, &actbank); -- writel((addrmid | (addrlo << 16)) & probemask, -+ writel(marker, - priv->base + EIP197_CLASSIFICATION_RAMS + - (addrmid & 0xffff)); - -- /* write marker to lowest address in bottom half */ -- eip197_trc_cache_banksel(priv, addrlo, &actbank); -- writel((addrlo | (addrhi << 16)) & probemask, -- priv->base + EIP197_CLASSIFICATION_RAMS + -- (addrlo & 0xffff)); -+ /* write invalid markers to possible aliases */ -+ delta = 1 << __fls(addrmid); -+ while (delta >= stride) { -+ addralias = addrmid - delta; -+ eip197_trc_cache_banksel(priv, addralias, &actbank); -+ writel(~marker, -+ priv->base + EIP197_CLASSIFICATION_RAMS + -+ (addralias & 0xffff)); -+ delta >>= 1; -+ } - - /* read back marker from top half */ - eip197_trc_cache_banksel(priv, addrmid, &actbank); - val = readl(priv->base + EIP197_CLASSIFICATION_RAMS + - (addrmid & 0xffff)); - -- if (val == ((addrmid | (addrlo << 16)) & probemask)) { -+ if ((val & probemask) == marker) - /* read back correct, continue with top half */ - addrlo = addrmid; -- } else { -+ else - /* not read back correct, continue with bottom half */ - addrhi = addrmid; -- } - } - return addrhi; - } -@@ -150,7 +155,7 @@ static void eip197_trc_cache_clear(struc - htable_offset + i * sizeof(u32)); - } - --static void eip197_trc_cache_init(struct safexcel_crypto_priv *priv) -+static int eip197_trc_cache_init(struct safexcel_crypto_priv *priv) - { - u32 val, dsize, asize; - int cs_rc_max, cs_ht_wc, cs_trc_rec_wc, cs_trc_lg_rec_wc; -@@ -183,7 +188,7 @@ static void eip197_trc_cache_init(struct - writel(val, priv->base + EIP197_TRC_PARAMS); - - /* Probed data RAM size in bytes */ -- dsize = eip197_trc_cache_probe(priv, maxbanks, 0xffffffff); -+ dsize = eip197_trc_cache_probe(priv, maxbanks, 0xffffffff, 32); - - /* - * Now probe the administration RAM size pretty much the same way -@@ -196,11 +201,18 @@ static void eip197_trc_cache_init(struct - writel(val, priv->base + EIP197_TRC_PARAMS); - - /* Probed admin RAM size in admin words */ -- asize = eip197_trc_cache_probe(priv, 0, 0xbfffffff) >> 4; -+ asize = eip197_trc_cache_probe(priv, 0, 0x3fffffff, 16) >> 4; - - /* Clear any ECC errors detected while probing! */ - writel(0, priv->base + EIP197_TRC_ECCCTRL); - -+ /* Sanity check probing results */ -+ if (dsize < EIP197_MIN_DSIZE || asize < EIP197_MIN_ASIZE) { -+ dev_err(priv->dev, "Record cache probing failed (%d,%d).", -+ dsize, asize); -+ return -ENODEV; -+ } -+ - /* - * Determine optimal configuration from RAM sizes - * Note that we assume that the physical RAM configuration is sane -@@ -251,6 +263,7 @@ static void eip197_trc_cache_init(struct - - dev_info(priv->dev, "TRC init: %dd,%da (%dr,%dh)\n", - dsize, asize, cs_rc_max, cs_ht_wc + cs_ht_wc); -+ return 0; - } - - static void eip197_init_firmware(struct safexcel_crypto_priv *priv) -@@ -298,13 +311,14 @@ static void eip197_init_firmware(struct - static int eip197_write_firmware(struct safexcel_crypto_priv *priv, - const struct firmware *fw) - { -- const u32 *data = (const u32 *)fw->data; -+ const __be32 *data = (const __be32 *)fw->data; - int i; - - /* Write the firmware */ - for (i = 0; i < fw->size / sizeof(u32); i++) - writel(be32_to_cpu(data[i]), -- priv->base + EIP197_CLASSIFICATION_RAMS + i * sizeof(u32)); -+ priv->base + EIP197_CLASSIFICATION_RAMS + -+ i * sizeof(__be32)); - - /* Exclude final 2 NOPs from size */ - return i - EIP197_FW_TERMINAL_NOPS; -@@ -471,6 +485,14 @@ static int safexcel_hw_setup_cdesc_rings - cd_fetch_cnt = ((1 << priv->hwconfig.hwcfsize) / - cd_size_rnd) - 1; - } -+ /* -+ * Since we're using command desc's way larger than formally specified, -+ * we need to check whether we can fit even 1 for low-end EIP196's! -+ */ -+ if (!cd_fetch_cnt) { -+ dev_err(priv->dev, "Unable to fit even 1 command desc!\n"); -+ return -ENODEV; -+ } - - for (i = 0; i < priv->config.rings; i++) { - /* ring base address */ -@@ -479,12 +501,12 @@ static int safexcel_hw_setup_cdesc_rings - writel(upper_32_bits(priv->ring[i].cdr.base_dma), - EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI); - -- writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.cd_offset << 16) | -- priv->config.cd_size, -+ writel(EIP197_xDR_DESC_MODE_64BIT | EIP197_CDR_DESC_MODE_ADCP | -+ (priv->config.cd_offset << 14) | priv->config.cd_size, - EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE); - writel(((cd_fetch_cnt * - (cd_size_rnd << priv->hwconfig.hwdataw)) << 16) | -- (cd_fetch_cnt * priv->config.cd_offset), -+ (cd_fetch_cnt * (priv->config.cd_offset / sizeof(u32))), - EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_CFG); - - /* Configure DMA tx control */ -@@ -527,13 +549,13 @@ static int safexcel_hw_setup_rdesc_rings - writel(upper_32_bits(priv->ring[i].rdr.base_dma), - EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_BASE_ADDR_HI); - -- writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.rd_offset << 16) | -+ writel(EIP197_xDR_DESC_MODE_64BIT | (priv->config.rd_offset << 14) | - priv->config.rd_size, - EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE); - - writel(((rd_fetch_cnt * - (rd_size_rnd << priv->hwconfig.hwdataw)) << 16) | -- (rd_fetch_cnt * priv->config.rd_offset), -+ (rd_fetch_cnt * (priv->config.rd_offset / sizeof(u32))), - EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG); - - /* Configure DMA tx control */ -@@ -559,7 +581,7 @@ static int safexcel_hw_setup_rdesc_rings - static int safexcel_hw_init(struct safexcel_crypto_priv *priv) - { - u32 val; -- int i, ret, pe; -+ int i, ret, pe, opbuflo, opbufhi; - - dev_dbg(priv->dev, "HW init: using %d pipe(s) and %d ring(s)\n", - priv->config.pes, priv->config.rings); -@@ -595,8 +617,8 @@ static int safexcel_hw_init(struct safex - writel(EIP197_DxE_THR_CTRL_RESET_PE, - EIP197_HIA_DFE_THR(priv) + EIP197_HIA_DFE_THR_CTRL(pe)); - -- if (priv->flags & SAFEXCEL_HW_EIP197) -- /* Reset HIA input interface arbiter (EIP197 only) */ -+ if (priv->flags & EIP197_PE_ARB) -+ /* Reset HIA input interface arbiter (if present) */ - writel(EIP197_HIA_RA_PE_CTRL_RESET, - EIP197_HIA_AIC(priv) + EIP197_HIA_RA_PE_CTRL(pe)); - -@@ -639,9 +661,16 @@ static int safexcel_hw_init(struct safex - ; - - /* DMA transfer size to use */ -+ if (priv->hwconfig.hwnumpes > 4) { -+ opbuflo = 9; -+ opbufhi = 10; -+ } else { -+ opbuflo = 7; -+ opbufhi = 8; -+ } - val = EIP197_HIA_DSE_CFG_DIS_DEBUG; -- val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(7) | -- EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(8); -+ val |= EIP197_HIA_DxE_CFG_MIN_DATA_SIZE(opbuflo) | -+ EIP197_HIA_DxE_CFG_MAX_DATA_SIZE(opbufhi); - val |= EIP197_HIA_DxE_CFG_DATA_CACHE_CTRL(WR_CACHE_3BITS); - val |= EIP197_HIA_DSE_CFG_ALWAYS_BUFFERABLE; - /* FIXME: instability issues can occur for EIP97 but disabling -@@ -655,8 +684,8 @@ static int safexcel_hw_init(struct safex - writel(0, EIP197_HIA_DSE_THR(priv) + EIP197_HIA_DSE_THR_CTRL(pe)); - - /* Configure the procesing engine thresholds */ -- writel(EIP197_PE_OUT_DBUF_THRES_MIN(7) | -- EIP197_PE_OUT_DBUF_THRES_MAX(8), -+ writel(EIP197_PE_OUT_DBUF_THRES_MIN(opbuflo) | -+ EIP197_PE_OUT_DBUF_THRES_MAX(opbufhi), - EIP197_PE(priv) + EIP197_PE_OUT_DBUF_THRES(pe)); - - /* Processing Engine configuration */ -@@ -696,7 +725,7 @@ static int safexcel_hw_init(struct safex - writel(0, - EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR); - -- writel((EIP197_DEFAULT_RING_SIZE * priv->config.cd_offset) << 2, -+ writel((EIP197_DEFAULT_RING_SIZE * priv->config.cd_offset), - EIP197_HIA_CDR(priv, i) + EIP197_HIA_xDR_RING_SIZE); - } - -@@ -719,7 +748,7 @@ static int safexcel_hw_init(struct safex - EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_PROC_PNTR); - - /* Ring size */ -- writel((EIP197_DEFAULT_RING_SIZE * priv->config.rd_offset) << 2, -+ writel((EIP197_DEFAULT_RING_SIZE * priv->config.rd_offset), - EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_RING_SIZE); - } - -@@ -736,19 +765,28 @@ static int safexcel_hw_init(struct safex - /* Clear any HIA interrupt */ - writel(GENMASK(30, 20), EIP197_HIA_AIC_G(priv) + EIP197_HIA_AIC_G_ACK); - -- if (priv->flags & SAFEXCEL_HW_EIP197) { -- eip197_trc_cache_init(priv); -- priv->flags |= EIP197_TRC_CACHE; -+ if (priv->flags & EIP197_SIMPLE_TRC) { -+ writel(EIP197_STRC_CONFIG_INIT | -+ EIP197_STRC_CONFIG_LARGE_REC(EIP197_CS_TRC_REC_WC) | -+ EIP197_STRC_CONFIG_SMALL_REC(EIP197_CS_TRC_REC_WC), -+ priv->base + EIP197_STRC_CONFIG); -+ writel(EIP197_PE_EIP96_TOKEN_CTRL2_CTX_DONE, -+ EIP197_PE(priv) + EIP197_PE_EIP96_TOKEN_CTRL2(0)); -+ } else if (priv->flags & SAFEXCEL_HW_EIP197) { -+ ret = eip197_trc_cache_init(priv); -+ if (ret) -+ return ret; -+ } - -+ if (priv->flags & EIP197_ICE) { - ret = eip197_load_firmwares(priv); - if (ret) - return ret; - } - -- safexcel_hw_setup_cdesc_rings(priv); -- safexcel_hw_setup_rdesc_rings(priv); -- -- return 0; -+ return safexcel_hw_setup_cdesc_rings(priv) ?: -+ safexcel_hw_setup_rdesc_rings(priv) ?: -+ 0; - } - - /* Called with ring's lock taken */ -@@ -836,20 +874,24 @@ finalize: - spin_unlock_bh(&priv->ring[ring].lock); - - /* let the RDR know we have pending descriptors */ -- writel((rdesc * priv->config.rd_offset) << 2, -+ writel((rdesc * priv->config.rd_offset), - EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT); - - /* let the CDR know we have pending descriptors */ -- writel((cdesc * priv->config.cd_offset) << 2, -+ writel((cdesc * priv->config.cd_offset), - EIP197_HIA_CDR(priv, ring) + EIP197_HIA_xDR_PREP_COUNT); - } - - inline int safexcel_rdesc_check_errors(struct safexcel_crypto_priv *priv, -- struct safexcel_result_desc *rdesc) -+ void *rdp) - { -- if (likely((!rdesc->descriptor_overflow) && -- (!rdesc->buffer_overflow) && -- (!rdesc->result_data.error_code))) -+ struct safexcel_result_desc *rdesc = rdp; -+ struct result_data_desc *result_data = rdp + priv->config.res_offset; -+ -+ if (likely((!rdesc->last_seg) || /* Rest only valid if last seg! */ -+ ((!rdesc->descriptor_overflow) && -+ (!rdesc->buffer_overflow) && -+ (!result_data->error_code)))) - return 0; - - if (rdesc->descriptor_overflow) -@@ -858,13 +900,14 @@ inline int safexcel_rdesc_check_errors(s - if (rdesc->buffer_overflow) - dev_err(priv->dev, "Buffer overflow detected"); - -- if (rdesc->result_data.error_code & 0x4066) { -+ if (result_data->error_code & 0x4066) { - /* Fatal error (bits 1,2,5,6 & 14) */ - dev_err(priv->dev, - "result descriptor error (%x)", -- rdesc->result_data.error_code); -+ result_data->error_code); -+ - return -EIO; -- } else if (rdesc->result_data.error_code & -+ } else if (result_data->error_code & - (BIT(7) | BIT(4) | BIT(3) | BIT(0))) { - /* - * Give priority over authentication fails: -@@ -872,7 +915,7 @@ inline int safexcel_rdesc_check_errors(s - * something wrong with the input! - */ - return -EINVAL; -- } else if (rdesc->result_data.error_code & BIT(9)) { -+ } else if (result_data->error_code & BIT(9)) { - /* Authentication failed */ - return -EBADMSG; - } -@@ -931,16 +974,18 @@ int safexcel_invalidate_cache(struct cry - { - struct safexcel_command_desc *cdesc; - struct safexcel_result_desc *rdesc; -+ struct safexcel_token *dmmy; - int ret = 0; - - /* Prepare command descriptor */ -- cdesc = safexcel_add_cdesc(priv, ring, true, true, 0, 0, 0, ctxr_dma); -+ cdesc = safexcel_add_cdesc(priv, ring, true, true, 0, 0, 0, ctxr_dma, -+ &dmmy); - if (IS_ERR(cdesc)) - return PTR_ERR(cdesc); - - cdesc->control_data.type = EIP197_TYPE_EXTENDED; - cdesc->control_data.options = 0; -- cdesc->control_data.refresh = 0; -+ cdesc->control_data.context_lo &= ~EIP197_CONTEXT_SIZE_MASK; - cdesc->control_data.control0 = CONTEXT_CONTROL_INV_TR; - - /* Prepare result descriptor */ -@@ -1003,7 +1048,7 @@ handle_results: - acknowledge: - if (i) - writel(EIP197_xDR_PROC_xD_PKT(i) | -- EIP197_xDR_PROC_xD_COUNT(tot_descs * priv->config.rd_offset), -+ (tot_descs * priv->config.rd_offset), - EIP197_HIA_RDR(priv, ring) + EIP197_HIA_xDR_PROC_COUNT); - - /* If the number of requests overflowed the counter, try to proceed more -@@ -1171,6 +1216,44 @@ static struct safexcel_alg_template *saf - &safexcel_alg_xts_aes, - &safexcel_alg_gcm, - &safexcel_alg_ccm, -+ &safexcel_alg_crc32, -+ &safexcel_alg_cbcmac, -+ &safexcel_alg_xcbcmac, -+ &safexcel_alg_cmac, -+ &safexcel_alg_chacha20, -+ &safexcel_alg_chachapoly, -+ &safexcel_alg_chachapoly_esp, -+ &safexcel_alg_sm3, -+ &safexcel_alg_hmac_sm3, -+ &safexcel_alg_ecb_sm4, -+ &safexcel_alg_cbc_sm4, -+ &safexcel_alg_ofb_sm4, -+ &safexcel_alg_cfb_sm4, -+ &safexcel_alg_ctr_sm4, -+ &safexcel_alg_authenc_hmac_sha1_cbc_sm4, -+ &safexcel_alg_authenc_hmac_sm3_cbc_sm4, -+ &safexcel_alg_authenc_hmac_sha1_ctr_sm4, -+ &safexcel_alg_authenc_hmac_sm3_ctr_sm4, -+ &safexcel_alg_sha3_224, -+ &safexcel_alg_sha3_256, -+ &safexcel_alg_sha3_384, -+ &safexcel_alg_sha3_512, -+ &safexcel_alg_hmac_sha3_224, -+ &safexcel_alg_hmac_sha3_256, -+ &safexcel_alg_hmac_sha3_384, -+ &safexcel_alg_hmac_sha3_512, -+ &safexcel_alg_authenc_hmac_sha1_cbc_des, -+ &safexcel_alg_authenc_hmac_sha256_cbc_des3_ede, -+ &safexcel_alg_authenc_hmac_sha224_cbc_des3_ede, -+ &safexcel_alg_authenc_hmac_sha512_cbc_des3_ede, -+ &safexcel_alg_authenc_hmac_sha384_cbc_des3_ede, -+ &safexcel_alg_authenc_hmac_sha256_cbc_des, -+ &safexcel_alg_authenc_hmac_sha224_cbc_des, -+ &safexcel_alg_authenc_hmac_sha512_cbc_des, -+ &safexcel_alg_authenc_hmac_sha384_cbc_des, -+ &safexcel_alg_rfc4106_gcm, -+ &safexcel_alg_rfc4543_gcm, -+ &safexcel_alg_rfc4309_ccm, - }; - - static int safexcel_register_algorithms(struct safexcel_crypto_priv *priv) -@@ -1240,30 +1323,30 @@ static void safexcel_unregister_algorith - - static void safexcel_configure(struct safexcel_crypto_priv *priv) - { -- u32 val, mask = 0; -- -- val = readl(EIP197_HIA_AIC_G(priv) + EIP197_HIA_OPTIONS); -- -- /* Read number of PEs from the engine */ -- if (priv->flags & SAFEXCEL_HW_EIP197) -- /* Wider field width for all EIP197 type engines */ -- mask = EIP197_N_PES_MASK; -- else -- /* Narrow field width for EIP97 type engine */ -- mask = EIP97_N_PES_MASK; -- -- priv->config.pes = (val >> EIP197_N_PES_OFFSET) & mask; -+ u32 mask = BIT(priv->hwconfig.hwdataw) - 1; - -- priv->config.rings = min_t(u32, val & GENMASK(3, 0), max_rings); -+ priv->config.pes = priv->hwconfig.hwnumpes; -+ priv->config.rings = min_t(u32, priv->hwconfig.hwnumrings, max_rings); -+ /* Cannot currently support more rings than we have ring AICs! */ -+ priv->config.rings = min_t(u32, priv->config.rings, -+ priv->hwconfig.hwnumraic); - -- val = (val & GENMASK(27, 25)) >> 25; -- mask = BIT(val) - 1; -- -- priv->config.cd_size = (sizeof(struct safexcel_command_desc) / sizeof(u32)); -+ priv->config.cd_size = EIP197_CD64_FETCH_SIZE; - priv->config.cd_offset = (priv->config.cd_size + mask) & ~mask; -+ priv->config.cdsh_offset = (EIP197_MAX_TOKENS + mask) & ~mask; - -- priv->config.rd_size = (sizeof(struct safexcel_result_desc) / sizeof(u32)); -+ /* res token is behind the descr, but ofs must be rounded to buswdth */ -+ priv->config.res_offset = (EIP197_RD64_FETCH_SIZE + mask) & ~mask; -+ /* now the size of the descr is this 1st part plus the result struct */ -+ priv->config.rd_size = priv->config.res_offset + -+ EIP197_RD64_RESULT_SIZE; - priv->config.rd_offset = (priv->config.rd_size + mask) & ~mask; -+ -+ /* convert dwords to bytes */ -+ priv->config.cd_offset *= sizeof(u32); -+ priv->config.cdsh_offset *= sizeof(u32); -+ priv->config.rd_offset *= sizeof(u32); -+ priv->config.res_offset *= sizeof(u32); - } - - static void safexcel_init_register_offsets(struct safexcel_crypto_priv *priv) -@@ -1309,7 +1392,7 @@ static int safexcel_probe_generic(void * - int is_pci_dev) - { - struct device *dev = priv->dev; -- u32 peid, version, mask, val, hiaopt; -+ u32 peid, version, mask, val, hiaopt, hwopt, peopt; - int i, ret, hwctg; - - priv->context_pool = dmam_pool_create("safexcel-context", dev, -@@ -1371,13 +1454,16 @@ static int safexcel_probe_generic(void * - */ - version = readl(EIP197_GLOBAL(priv) + EIP197_VERSION); - if (((priv->flags & SAFEXCEL_HW_EIP197) && -- (EIP197_REG_LO16(version) != EIP197_VERSION_LE)) || -+ (EIP197_REG_LO16(version) != EIP197_VERSION_LE) && -+ (EIP197_REG_LO16(version) != EIP196_VERSION_LE)) || - ((!(priv->flags & SAFEXCEL_HW_EIP197) && - (EIP197_REG_LO16(version) != EIP97_VERSION_LE)))) { - /* - * We did not find the device that matched our initial probing - * (or our initial probing failed) Report appropriate error. - */ -+ dev_err(priv->dev, "Probing for EIP97/EIP19x failed - no such device (read %08x)\n", -+ version); - return -ENODEV; - } - -@@ -1385,6 +1471,14 @@ static int safexcel_probe_generic(void * - hwctg = version >> 28; - peid = version & 255; - -+ /* Detect EIP206 processing pipe */ -+ version = readl(EIP197_PE(priv) + + EIP197_PE_VERSION(0)); -+ if (EIP197_REG_LO16(version) != EIP206_VERSION_LE) { -+ dev_err(priv->dev, "EIP%d: EIP206 not detected\n", peid); -+ return -ENODEV; -+ } -+ priv->hwconfig.ppver = EIP197_VERSION_MASK(version); -+ - /* Detect EIP96 packet engine and version */ - version = readl(EIP197_PE(priv) + EIP197_PE_EIP96_VERSION(0)); - if (EIP197_REG_LO16(version) != EIP96_VERSION_LE) { -@@ -1393,10 +1487,13 @@ static int safexcel_probe_generic(void * - } - priv->hwconfig.pever = EIP197_VERSION_MASK(version); - -+ hwopt = readl(EIP197_GLOBAL(priv) + EIP197_OPTIONS); - hiaopt = readl(EIP197_HIA_AIC(priv) + EIP197_HIA_OPTIONS); - - if (priv->flags & SAFEXCEL_HW_EIP197) { - /* EIP197 */ -+ peopt = readl(EIP197_PE(priv) + EIP197_PE_OPTIONS(0)); -+ - priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) & - EIP197_HWDATAW_MASK; - priv->hwconfig.hwcfsize = ((hiaopt >> EIP197_CFSIZE_OFFSET) & -@@ -1405,6 +1502,19 @@ static int safexcel_probe_generic(void * - priv->hwconfig.hwrfsize = ((hiaopt >> EIP197_RFSIZE_OFFSET) & - EIP197_RFSIZE_MASK) + - EIP197_RFSIZE_ADJUST; -+ priv->hwconfig.hwnumpes = (hiaopt >> EIP197_N_PES_OFFSET) & -+ EIP197_N_PES_MASK; -+ priv->hwconfig.hwnumrings = (hiaopt >> EIP197_N_RINGS_OFFSET) & -+ EIP197_N_RINGS_MASK; -+ if (hiaopt & EIP197_HIA_OPT_HAS_PE_ARB) -+ priv->flags |= EIP197_PE_ARB; -+ if (EIP206_OPT_ICE_TYPE(peopt) == 1) -+ priv->flags |= EIP197_ICE; -+ /* If not a full TRC, then assume simple TRC */ -+ if (!(hwopt & EIP197_OPT_HAS_TRC)) -+ priv->flags |= EIP197_SIMPLE_TRC; -+ /* EIP197 always has SOME form of TRC */ -+ priv->flags |= EIP197_TRC_CACHE; - } else { - /* EIP97 */ - priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) & -@@ -1413,6 +1523,23 @@ static int safexcel_probe_generic(void * - EIP97_CFSIZE_MASK; - priv->hwconfig.hwrfsize = (hiaopt >> EIP97_RFSIZE_OFFSET) & - EIP97_RFSIZE_MASK; -+ priv->hwconfig.hwnumpes = 1; /* by definition */ -+ priv->hwconfig.hwnumrings = (hiaopt >> EIP197_N_RINGS_OFFSET) & -+ EIP197_N_RINGS_MASK; -+ } -+ -+ /* Scan for ring AIC's */ -+ for (i = 0; i < EIP197_MAX_RING_AIC; i++) { -+ version = readl(EIP197_HIA_AIC_R(priv) + -+ EIP197_HIA_AIC_R_VERSION(i)); -+ if (EIP197_REG_LO16(version) != EIP201_VERSION_LE) -+ break; -+ } -+ priv->hwconfig.hwnumraic = i; -+ /* Low-end EIP196 may not have any ring AIC's ... */ -+ if (!priv->hwconfig.hwnumraic) { -+ dev_err(priv->dev, "No ring interrupt controller present!\n"); -+ return -ENODEV; - } - - /* Get supported algorithms from EIP96 transform engine */ -@@ -1420,10 +1547,12 @@ static int safexcel_probe_generic(void * - EIP197_PE_EIP96_OPTIONS(0)); - - /* Print single info line describing what we just detected */ -- dev_info(priv->dev, "EIP%d:%x(%d)-HIA:%x(%d,%d,%d),PE:%x,alg:%08x\n", -- peid, priv->hwconfig.hwver, hwctg, priv->hwconfig.hiaver, -- priv->hwconfig.hwdataw, priv->hwconfig.hwcfsize, -- priv->hwconfig.hwrfsize, priv->hwconfig.pever, -+ dev_info(priv->dev, "EIP%d:%x(%d,%d,%d,%d)-HIA:%x(%d,%d,%d),PE:%x/%x,alg:%08x\n", -+ peid, priv->hwconfig.hwver, hwctg, priv->hwconfig.hwnumpes, -+ priv->hwconfig.hwnumrings, priv->hwconfig.hwnumraic, -+ priv->hwconfig.hiaver, priv->hwconfig.hwdataw, -+ priv->hwconfig.hwcfsize, priv->hwconfig.hwrfsize, -+ priv->hwconfig.ppver, priv->hwconfig.pever, - priv->hwconfig.algo_flags); - - safexcel_configure(priv); -@@ -1547,7 +1676,6 @@ static void safexcel_hw_reset_rings(stru - } - } - --#if IS_ENABLED(CONFIG_OF) - /* for Device Tree platform driver */ - - static int safexcel_probe(struct platform_device *pdev) -@@ -1625,6 +1753,7 @@ static int safexcel_remove(struct platfo - safexcel_unregister_algorithms(priv); - safexcel_hw_reset_rings(priv); - -+ clk_disable_unprepare(priv->reg_clk); - clk_disable_unprepare(priv->clk); - - for (i = 0; i < priv->config.rings; i++) -@@ -1666,9 +1795,7 @@ static struct platform_driver crypto_sa - .of_match_table = safexcel_of_match_table, - }, - }; --#endif - --#if IS_ENABLED(CONFIG_PCI) - /* PCIE devices - i.e. Inside Secure development boards */ - - static int safexcel_pci_probe(struct pci_dev *pdev, -@@ -1759,7 +1886,7 @@ static int safexcel_pci_probe(struct pci - return rc; - } - --void safexcel_pci_remove(struct pci_dev *pdev) -+static void safexcel_pci_remove(struct pci_dev *pdev) - { - struct safexcel_crypto_priv *priv = pci_get_drvdata(pdev); - int i; -@@ -1789,54 +1916,32 @@ static struct pci_driver safexcel_pci_dr - .probe = safexcel_pci_probe, - .remove = safexcel_pci_remove, - }; --#endif -- --/* Unfortunately, we have to resort to global variables here */ --#if IS_ENABLED(CONFIG_PCI) --int pcireg_rc = -EINVAL; /* Default safe value */ --#endif --#if IS_ENABLED(CONFIG_OF) --int ofreg_rc = -EINVAL; /* Default safe value */ --#endif - - static int __init safexcel_init(void) - { --#if IS_ENABLED(CONFIG_PCI) -+ int ret; -+ - /* Register PCI driver */ -- pcireg_rc = pci_register_driver(&safexcel_pci_driver); --#endif -+ ret = pci_register_driver(&safexcel_pci_driver); - --#if IS_ENABLED(CONFIG_OF) - /* Register platform driver */ -- ofreg_rc = platform_driver_register(&crypto_safexcel); -- #if IS_ENABLED(CONFIG_PCI) -- /* Return success if either PCI or OF registered OK */ -- return pcireg_rc ? ofreg_rc : 0; -- #else -- return ofreg_rc; -- #endif --#else -- #if IS_ENABLED(CONFIG_PCI) -- return pcireg_rc; -- #else -- return -EINVAL; -- #endif --#endif -+ if (IS_ENABLED(CONFIG_OF) && !ret) { -+ ret = platform_driver_register(&crypto_safexcel); -+ if (ret) -+ pci_unregister_driver(&safexcel_pci_driver); -+ } -+ -+ return ret; - } - - static void __exit safexcel_exit(void) - { --#if IS_ENABLED(CONFIG_OF) - /* Unregister platform driver */ -- if (!ofreg_rc) -+ if (IS_ENABLED(CONFIG_OF)) - platform_driver_unregister(&crypto_safexcel); --#endif - --#if IS_ENABLED(CONFIG_PCI) - /* Unregister PCI driver if successfully registered before */ -- if (!pcireg_rc) -- pci_unregister_driver(&safexcel_pci_driver); --#endif -+ pci_unregister_driver(&safexcel_pci_driver); - } - - module_init(safexcel_init); ---- a/drivers/crypto/inside-secure/safexcel_cipher.c -+++ b/drivers/crypto/inside-secure/safexcel_cipher.c -@@ -5,18 +5,22 @@ - * Antoine Tenart - */ - -+#include - #include - #include - #include -- - #include - #include - #include -+#include - #include - #include - #include - #include -+#include - #include -+#include -+#include - #include - #include - #include -@@ -33,6 +37,8 @@ enum safexcel_cipher_alg { - SAFEXCEL_DES, - SAFEXCEL_3DES, - SAFEXCEL_AES, -+ SAFEXCEL_CHACHA20, -+ SAFEXCEL_SM4, - }; - - struct safexcel_cipher_ctx { -@@ -41,8 +47,12 @@ struct safexcel_cipher_ctx { - - u32 mode; - enum safexcel_cipher_alg alg; -- bool aead; -- int xcm; /* 0=authenc, 1=GCM, 2 reserved for CCM */ -+ u8 aead; /* !=0=AEAD, 2=IPSec ESP AEAD, 3=IPsec ESP GMAC */ -+ u8 xcm; /* 0=authenc, 1=GCM, 2 reserved for CCM */ -+ u8 aadskip; -+ u8 blocksz; -+ u32 ivmask; -+ u32 ctrinit; - - __le32 key[16]; - u32 nonce; -@@ -51,10 +61,11 @@ struct safexcel_cipher_ctx { - /* All the below is AEAD specific */ - u32 hash_alg; - u32 state_sz; -- u32 ipad[SHA512_DIGEST_SIZE / sizeof(u32)]; -- u32 opad[SHA512_DIGEST_SIZE / sizeof(u32)]; -+ __be32 ipad[SHA512_DIGEST_SIZE / sizeof(u32)]; -+ __be32 opad[SHA512_DIGEST_SIZE / sizeof(u32)]; - - struct crypto_cipher *hkaes; -+ struct crypto_aead *fback; - }; - - struct safexcel_cipher_req { -@@ -65,206 +76,298 @@ struct safexcel_cipher_req { - int nr_src, nr_dst; - }; - --static void safexcel_cipher_token(struct safexcel_cipher_ctx *ctx, u8 *iv, -- struct safexcel_command_desc *cdesc) -+static int safexcel_skcipher_iv(struct safexcel_cipher_ctx *ctx, u8 *iv, -+ struct safexcel_command_desc *cdesc) - { -- u32 block_sz = 0; -- - if (ctx->mode == CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD) { - cdesc->control_data.options |= EIP197_OPTION_4_TOKEN_IV_CMD; -- - /* 32 bit nonce */ - cdesc->control_data.token[0] = ctx->nonce; - /* 64 bit IV part */ - memcpy(&cdesc->control_data.token[1], iv, 8); -- /* 32 bit counter, start at 1 (big endian!) */ -- cdesc->control_data.token[3] = cpu_to_be32(1); -- -- return; -- } else if (ctx->xcm == EIP197_XCM_MODE_GCM) { -- cdesc->control_data.options |= EIP197_OPTION_4_TOKEN_IV_CMD; -- -- /* 96 bit IV part */ -- memcpy(&cdesc->control_data.token[0], iv, 12); -- /* 32 bit counter, start at 1 (big endian!) */ -- cdesc->control_data.token[3] = cpu_to_be32(1); -- -- return; -- } else if (ctx->xcm == EIP197_XCM_MODE_CCM) { -+ /* 32 bit counter, start at 0 or 1 (big endian!) */ -+ cdesc->control_data.token[3] = -+ (__force u32)cpu_to_be32(ctx->ctrinit); -+ return 4; -+ } -+ if (ctx->alg == SAFEXCEL_CHACHA20) { - cdesc->control_data.options |= EIP197_OPTION_4_TOKEN_IV_CMD; -- -- /* Variable length IV part */ -- memcpy(&cdesc->control_data.token[0], iv, 15 - iv[0]); -- /* Start variable length counter at 0 */ -- memset((u8 *)&cdesc->control_data.token[0] + 15 - iv[0], -- 0, iv[0] + 1); -- -- return; -+ /* 96 bit nonce part */ -+ memcpy(&cdesc->control_data.token[0], &iv[4], 12); -+ /* 32 bit counter */ -+ cdesc->control_data.token[3] = *(u32 *)iv; -+ return 4; - } - -- if (ctx->mode != CONTEXT_CONTROL_CRYPTO_MODE_ECB) { -- switch (ctx->alg) { -- case SAFEXCEL_DES: -- block_sz = DES_BLOCK_SIZE; -- cdesc->control_data.options |= EIP197_OPTION_2_TOKEN_IV_CMD; -- break; -- case SAFEXCEL_3DES: -- block_sz = DES3_EDE_BLOCK_SIZE; -- cdesc->control_data.options |= EIP197_OPTION_2_TOKEN_IV_CMD; -- break; -- case SAFEXCEL_AES: -- block_sz = AES_BLOCK_SIZE; -- cdesc->control_data.options |= EIP197_OPTION_4_TOKEN_IV_CMD; -- break; -- } -- memcpy(cdesc->control_data.token, iv, block_sz); -- } -+ cdesc->control_data.options |= ctx->ivmask; -+ memcpy(cdesc->control_data.token, iv, ctx->blocksz); -+ return ctx->blocksz / sizeof(u32); - } - - static void safexcel_skcipher_token(struct safexcel_cipher_ctx *ctx, u8 *iv, - struct safexcel_command_desc *cdesc, -+ struct safexcel_token *atoken, - u32 length) - { - struct safexcel_token *token; -+ int ivlen; - -- safexcel_cipher_token(ctx, iv, cdesc); -- -- /* skip over worst case IV of 4 dwords, no need to be exact */ -- token = (struct safexcel_token *)(cdesc->control_data.token + 4); -+ ivlen = safexcel_skcipher_iv(ctx, iv, cdesc); -+ if (ivlen == 4) { -+ /* No space in cdesc, instruction moves to atoken */ -+ cdesc->additional_cdata_size = 1; -+ token = atoken; -+ } else { -+ /* Everything fits in cdesc */ -+ token = (struct safexcel_token *)(cdesc->control_data.token + 2); -+ /* Need to pad with NOP */ -+ eip197_noop_token(&token[1]); -+ } -+ -+ token->opcode = EIP197_TOKEN_OPCODE_DIRECTION; -+ token->packet_length = length; -+ token->stat = EIP197_TOKEN_STAT_LAST_PACKET | -+ EIP197_TOKEN_STAT_LAST_HASH; -+ token->instructions = EIP197_TOKEN_INS_LAST | -+ EIP197_TOKEN_INS_TYPE_CRYPTO | -+ EIP197_TOKEN_INS_TYPE_OUTPUT; -+} - -- token[0].opcode = EIP197_TOKEN_OPCODE_DIRECTION; -- token[0].packet_length = length; -- token[0].stat = EIP197_TOKEN_STAT_LAST_PACKET | -- EIP197_TOKEN_STAT_LAST_HASH; -- token[0].instructions = EIP197_TOKEN_INS_LAST | -- EIP197_TOKEN_INS_TYPE_CRYPTO | -- EIP197_TOKEN_INS_TYPE_OUTPUT; -+static void safexcel_aead_iv(struct safexcel_cipher_ctx *ctx, u8 *iv, -+ struct safexcel_command_desc *cdesc) -+{ -+ if (ctx->mode == CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD || -+ ctx->aead & EIP197_AEAD_TYPE_IPSEC_ESP) { /* _ESP and _ESP_GMAC */ -+ /* 32 bit nonce */ -+ cdesc->control_data.token[0] = ctx->nonce; -+ /* 64 bit IV part */ -+ memcpy(&cdesc->control_data.token[1], iv, 8); -+ /* 32 bit counter, start at 0 or 1 (big endian!) */ -+ cdesc->control_data.token[3] = -+ (__force u32)cpu_to_be32(ctx->ctrinit); -+ return; -+ } -+ if (ctx->xcm == EIP197_XCM_MODE_GCM || ctx->alg == SAFEXCEL_CHACHA20) { -+ /* 96 bit IV part */ -+ memcpy(&cdesc->control_data.token[0], iv, 12); -+ /* 32 bit counter, start at 0 or 1 (big endian!) */ -+ cdesc->control_data.token[3] = -+ (__force u32)cpu_to_be32(ctx->ctrinit); -+ return; -+ } -+ /* CBC */ -+ memcpy(cdesc->control_data.token, iv, ctx->blocksz); - } - - static void safexcel_aead_token(struct safexcel_cipher_ctx *ctx, u8 *iv, - struct safexcel_command_desc *cdesc, -+ struct safexcel_token *atoken, - enum safexcel_cipher_direction direction, - u32 cryptlen, u32 assoclen, u32 digestsize) - { -- struct safexcel_token *token; -+ struct safexcel_token *aadref; -+ int atoksize = 2; /* Start with minimum size */ -+ int assocadj = assoclen - ctx->aadskip, aadalign; - -- safexcel_cipher_token(ctx, iv, cdesc); -+ /* Always 4 dwords of embedded IV for AEAD modes */ -+ cdesc->control_data.options |= EIP197_OPTION_4_TOKEN_IV_CMD; - -- if (direction == SAFEXCEL_ENCRYPT) { -- /* align end of instruction sequence to end of token */ -- token = (struct safexcel_token *)(cdesc->control_data.token + -- EIP197_MAX_TOKENS - 13); -- -- token[12].opcode = EIP197_TOKEN_OPCODE_INSERT; -- token[12].packet_length = digestsize; -- token[12].stat = EIP197_TOKEN_STAT_LAST_HASH | -- EIP197_TOKEN_STAT_LAST_PACKET; -- token[12].instructions = EIP197_TOKEN_INS_TYPE_OUTPUT | -- EIP197_TOKEN_INS_INSERT_HASH_DIGEST; -- } else { -+ if (direction == SAFEXCEL_DECRYPT) - cryptlen -= digestsize; - -- /* align end of instruction sequence to end of token */ -- token = (struct safexcel_token *)(cdesc->control_data.token + -- EIP197_MAX_TOKENS - 14); -- -- token[12].opcode = EIP197_TOKEN_OPCODE_RETRIEVE; -- token[12].packet_length = digestsize; -- token[12].stat = EIP197_TOKEN_STAT_LAST_HASH | -- EIP197_TOKEN_STAT_LAST_PACKET; -- token[12].instructions = EIP197_TOKEN_INS_INSERT_HASH_DIGEST; -- -- token[13].opcode = EIP197_TOKEN_OPCODE_VERIFY; -- token[13].packet_length = digestsize | -- EIP197_TOKEN_HASH_RESULT_VERIFY; -- token[13].stat = EIP197_TOKEN_STAT_LAST_HASH | -- EIP197_TOKEN_STAT_LAST_PACKET; -- token[13].instructions = EIP197_TOKEN_INS_TYPE_OUTPUT; -- } -- -- token[6].opcode = EIP197_TOKEN_OPCODE_DIRECTION; -- token[6].packet_length = assoclen; -- -- if (likely(cryptlen)) { -- token[6].instructions = EIP197_TOKEN_INS_TYPE_HASH; -- -- token[10].opcode = EIP197_TOKEN_OPCODE_DIRECTION; -- token[10].packet_length = cryptlen; -- token[10].stat = EIP197_TOKEN_STAT_LAST_HASH; -- token[10].instructions = EIP197_TOKEN_INS_LAST | -- EIP197_TOKEN_INS_TYPE_CRYPTO | -- EIP197_TOKEN_INS_TYPE_HASH | -- EIP197_TOKEN_INS_TYPE_OUTPUT; -- } else if (ctx->xcm != EIP197_XCM_MODE_CCM) { -- token[6].stat = EIP197_TOKEN_STAT_LAST_HASH; -- token[6].instructions = EIP197_TOKEN_INS_LAST | -- EIP197_TOKEN_INS_TYPE_HASH; -- } -- -- if (!ctx->xcm) -- return; -- -- token[8].opcode = EIP197_TOKEN_OPCODE_INSERT_REMRES; -- token[8].packet_length = 0; -- token[8].instructions = AES_BLOCK_SIZE; -- -- token[9].opcode = EIP197_TOKEN_OPCODE_INSERT; -- token[9].packet_length = AES_BLOCK_SIZE; -- token[9].instructions = EIP197_TOKEN_INS_TYPE_OUTPUT | -- EIP197_TOKEN_INS_TYPE_CRYPTO; -- -- if (ctx->xcm == EIP197_XCM_MODE_GCM) { -- token[6].instructions = EIP197_TOKEN_INS_LAST | -- EIP197_TOKEN_INS_TYPE_HASH; -- } else { -- u8 *cbcmaciv = (u8 *)&token[1]; -- u32 *aadlen = (u32 *)&token[5]; -- -+ if (unlikely(ctx->xcm == EIP197_XCM_MODE_CCM)) { - /* Construct IV block B0 for the CBC-MAC */ -- token[0].opcode = EIP197_TOKEN_OPCODE_INSERT; -- token[0].packet_length = AES_BLOCK_SIZE + -- ((assoclen > 0) << 1); -- token[0].instructions = EIP197_TOKEN_INS_ORIGIN_TOKEN | -- EIP197_TOKEN_INS_TYPE_HASH; -- /* Variable length IV part */ -- memcpy(cbcmaciv, iv, 15 - iv[0]); -- /* fixup flags byte */ -- cbcmaciv[0] |= ((assoclen > 0) << 6) | ((digestsize - 2) << 2); -- /* Clear upper bytes of variable message length to 0 */ -- memset(cbcmaciv + 15 - iv[0], 0, iv[0] - 1); -- /* insert lower 2 bytes of message length */ -- cbcmaciv[14] = cryptlen >> 8; -- cbcmaciv[15] = cryptlen & 255; -- -- if (assoclen) { -- *aadlen = cpu_to_le32(cpu_to_be16(assoclen)); -- assoclen += 2; -+ u8 *final_iv = (u8 *)cdesc->control_data.token; -+ u8 *cbcmaciv = (u8 *)&atoken[1]; -+ __le32 *aadlen = (__le32 *)&atoken[5]; -+ -+ if (ctx->aead == EIP197_AEAD_TYPE_IPSEC_ESP) { -+ /* Length + nonce */ -+ cdesc->control_data.token[0] = ctx->nonce; -+ /* Fixup flags byte */ -+ *(__le32 *)cbcmaciv = -+ cpu_to_le32(ctx->nonce | -+ ((assocadj > 0) << 6) | -+ ((digestsize - 2) << 2)); -+ /* 64 bit IV part */ -+ memcpy(&cdesc->control_data.token[1], iv, 8); -+ memcpy(cbcmaciv + 4, iv, 8); -+ /* Start counter at 0 */ -+ cdesc->control_data.token[3] = 0; -+ /* Message length */ -+ *(__be32 *)(cbcmaciv + 12) = cpu_to_be32(cryptlen); -+ } else { -+ /* Variable length IV part */ -+ memcpy(final_iv, iv, 15 - iv[0]); -+ memcpy(cbcmaciv, iv, 15 - iv[0]); -+ /* Start variable length counter at 0 */ -+ memset(final_iv + 15 - iv[0], 0, iv[0] + 1); -+ memset(cbcmaciv + 15 - iv[0], 0, iv[0] - 1); -+ /* fixup flags byte */ -+ cbcmaciv[0] |= ((assocadj > 0) << 6) | -+ ((digestsize - 2) << 2); -+ /* insert lower 2 bytes of message length */ -+ cbcmaciv[14] = cryptlen >> 8; -+ cbcmaciv[15] = cryptlen & 255; -+ } -+ -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT; -+ atoken->packet_length = AES_BLOCK_SIZE + -+ ((assocadj > 0) << 1); -+ atoken->stat = 0; -+ atoken->instructions = EIP197_TOKEN_INS_ORIGIN_TOKEN | -+ EIP197_TOKEN_INS_TYPE_HASH; -+ -+ if (likely(assocadj)) { -+ *aadlen = cpu_to_le32((assocadj >> 8) | -+ (assocadj & 255) << 8); -+ atoken += 6; -+ atoksize += 7; -+ } else { -+ atoken += 5; -+ atoksize += 6; - } - -- token[6].instructions = EIP197_TOKEN_INS_TYPE_HASH; -- -- /* Align AAD data towards hash engine */ -- token[7].opcode = EIP197_TOKEN_OPCODE_INSERT; -- assoclen &= 15; -- token[7].packet_length = assoclen ? 16 - assoclen : 0; -- -+ /* Process AAD data */ -+ aadref = atoken; -+ atoken->opcode = EIP197_TOKEN_OPCODE_DIRECTION; -+ atoken->packet_length = assocadj; -+ atoken->stat = 0; -+ atoken->instructions = EIP197_TOKEN_INS_TYPE_HASH; -+ atoken++; -+ -+ /* For CCM only, align AAD data towards hash engine */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT; -+ aadalign = (assocadj + 2) & 15; -+ atoken->packet_length = assocadj && aadalign ? -+ 16 - aadalign : -+ 0; - if (likely(cryptlen)) { -- token[7].instructions = EIP197_TOKEN_INS_TYPE_HASH; -- -- /* Align crypto data towards hash engine */ -- token[10].stat = 0; -+ atoken->stat = 0; -+ atoken->instructions = EIP197_TOKEN_INS_TYPE_HASH; -+ } else { -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH; -+ atoken->instructions = EIP197_TOKEN_INS_LAST | -+ EIP197_TOKEN_INS_TYPE_HASH; -+ } -+ } else { -+ safexcel_aead_iv(ctx, iv, cdesc); - -- token[11].opcode = EIP197_TOKEN_OPCODE_INSERT; -- cryptlen &= 15; -- token[11].packet_length = cryptlen ? 16 - cryptlen : 0; -- token[11].stat = EIP197_TOKEN_STAT_LAST_HASH; -- token[11].instructions = EIP197_TOKEN_INS_TYPE_HASH; -+ /* Process AAD data */ -+ aadref = atoken; -+ atoken->opcode = EIP197_TOKEN_OPCODE_DIRECTION; -+ atoken->packet_length = assocadj; -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH; -+ atoken->instructions = EIP197_TOKEN_INS_LAST | -+ EIP197_TOKEN_INS_TYPE_HASH; -+ } -+ atoken++; -+ -+ if (ctx->aead == EIP197_AEAD_TYPE_IPSEC_ESP) { -+ /* For ESP mode (and not GMAC), skip over the IV */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_DIRECTION; -+ atoken->packet_length = EIP197_AEAD_IPSEC_IV_SIZE; -+ atoken->stat = 0; -+ atoken->instructions = 0; -+ atoken++; -+ atoksize++; -+ } else if (unlikely(ctx->alg == SAFEXCEL_CHACHA20 && -+ direction == SAFEXCEL_DECRYPT)) { -+ /* Poly-chacha decryption needs a dummy NOP here ... */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT; -+ atoken->packet_length = 16; /* According to Op Manual */ -+ atoken->stat = 0; -+ atoken->instructions = 0; -+ atoken++; -+ atoksize++; -+ } -+ -+ if (ctx->xcm) { -+ /* For GCM and CCM, obtain enc(Y0) */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT_REMRES; -+ atoken->packet_length = 0; -+ atoken->stat = 0; -+ atoken->instructions = AES_BLOCK_SIZE; -+ atoken++; -+ -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT; -+ atoken->packet_length = AES_BLOCK_SIZE; -+ atoken->stat = 0; -+ atoken->instructions = EIP197_TOKEN_INS_TYPE_OUTPUT | -+ EIP197_TOKEN_INS_TYPE_CRYPTO; -+ atoken++; -+ atoksize += 2; -+ } -+ -+ if (likely(cryptlen || ctx->alg == SAFEXCEL_CHACHA20)) { -+ /* Fixup stat field for AAD direction instruction */ -+ aadref->stat = 0; -+ -+ /* Process crypto data */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_DIRECTION; -+ atoken->packet_length = cryptlen; -+ -+ if (unlikely(ctx->aead == EIP197_AEAD_TYPE_IPSEC_ESP_GMAC)) { -+ /* Fixup instruction field for AAD dir instruction */ -+ aadref->instructions = EIP197_TOKEN_INS_TYPE_HASH; -+ -+ /* Do not send to crypt engine in case of GMAC */ -+ atoken->instructions = EIP197_TOKEN_INS_LAST | -+ EIP197_TOKEN_INS_TYPE_HASH | -+ EIP197_TOKEN_INS_TYPE_OUTPUT; -+ } else { -+ atoken->instructions = EIP197_TOKEN_INS_LAST | -+ EIP197_TOKEN_INS_TYPE_CRYPTO | -+ EIP197_TOKEN_INS_TYPE_HASH | -+ EIP197_TOKEN_INS_TYPE_OUTPUT; -+ } -+ -+ cryptlen &= 15; -+ if (unlikely(ctx->xcm == EIP197_XCM_MODE_CCM && cryptlen)) { -+ atoken->stat = 0; -+ /* For CCM only, pad crypto data to the hash engine */ -+ atoken++; -+ atoksize++; -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT; -+ atoken->packet_length = 16 - cryptlen; -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH; -+ atoken->instructions = EIP197_TOKEN_INS_TYPE_HASH; - } else { -- token[7].stat = EIP197_TOKEN_STAT_LAST_HASH; -- token[7].instructions = EIP197_TOKEN_INS_LAST | -- EIP197_TOKEN_INS_TYPE_HASH; -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH; - } -+ atoken++; -+ atoksize++; - } -+ -+ if (direction == SAFEXCEL_ENCRYPT) { -+ /* Append ICV */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_INSERT; -+ atoken->packet_length = digestsize; -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH | -+ EIP197_TOKEN_STAT_LAST_PACKET; -+ atoken->instructions = EIP197_TOKEN_INS_TYPE_OUTPUT | -+ EIP197_TOKEN_INS_INSERT_HASH_DIGEST; -+ } else { -+ /* Extract ICV */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_RETRIEVE; -+ atoken->packet_length = digestsize; -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH | -+ EIP197_TOKEN_STAT_LAST_PACKET; -+ atoken->instructions = EIP197_TOKEN_INS_INSERT_HASH_DIGEST; -+ atoken++; -+ atoksize++; -+ -+ /* Verify ICV */ -+ atoken->opcode = EIP197_TOKEN_OPCODE_VERIFY; -+ atoken->packet_length = digestsize | -+ EIP197_TOKEN_HASH_RESULT_VERIFY; -+ atoken->stat = EIP197_TOKEN_STAT_LAST_HASH | -+ EIP197_TOKEN_STAT_LAST_PACKET; -+ atoken->instructions = EIP197_TOKEN_INS_TYPE_OUTPUT; -+ } -+ -+ /* Fixup length of the token in the command descriptor */ -+ cdesc->additional_cdata_size = atoksize; - } - - static int safexcel_skcipher_aes_setkey(struct crypto_skcipher *ctfm, -@@ -277,14 +380,12 @@ static int safexcel_skcipher_aes_setkey( - int ret, i; - - ret = aes_expandkey(&aes, key, len); -- if (ret) { -- crypto_skcipher_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ if (ret) - return ret; -- } - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < len / sizeof(u32); i++) { -- if (ctx->key[i] != cpu_to_le32(aes.key_enc[i])) { -+ if (le32_to_cpu(ctx->key[i]) != aes.key_enc[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -309,43 +410,57 @@ static int safexcel_aead_setkey(struct c - struct safexcel_crypto_priv *priv = ctx->priv; - struct crypto_authenc_keys keys; - struct crypto_aes_ctx aes; -- int err = -EINVAL; -+ int err = -EINVAL, i; - -- if (crypto_authenc_extractkeys(&keys, key, len) != 0) -+ if (unlikely(crypto_authenc_extractkeys(&keys, key, len))) - goto badkey; - - if (ctx->mode == CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD) { -- /* Minimum keysize is minimum AES key size + nonce size */ -- if (keys.enckeylen < (AES_MIN_KEY_SIZE + -- CTR_RFC3686_NONCE_SIZE)) -+ /* Must have at least space for the nonce here */ -+ if (unlikely(keys.enckeylen < CTR_RFC3686_NONCE_SIZE)) - goto badkey; - /* last 4 bytes of key are the nonce! */ - ctx->nonce = *(u32 *)(keys.enckey + keys.enckeylen - - CTR_RFC3686_NONCE_SIZE); - /* exclude the nonce here */ -- keys.enckeylen -= CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD; -+ keys.enckeylen -= CTR_RFC3686_NONCE_SIZE; - } - - /* Encryption key */ - switch (ctx->alg) { -+ case SAFEXCEL_DES: -+ err = verify_aead_des_key(ctfm, keys.enckey, keys.enckeylen); -+ if (unlikely(err)) -+ goto badkey; -+ break; - case SAFEXCEL_3DES: - err = verify_aead_des3_key(ctfm, keys.enckey, keys.enckeylen); - if (unlikely(err)) -- goto badkey_expflags; -+ goto badkey; - break; - case SAFEXCEL_AES: - err = aes_expandkey(&aes, keys.enckey, keys.enckeylen); - if (unlikely(err)) - goto badkey; - break; -+ case SAFEXCEL_SM4: -+ if (unlikely(keys.enckeylen != SM4_KEY_SIZE)) -+ goto badkey; -+ break; - default: - dev_err(priv->dev, "aead: unsupported cipher algorithm\n"); - goto badkey; - } - -- if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma && -- memcmp(ctx->key, keys.enckey, keys.enckeylen)) -- ctx->base.needs_inv = true; -+ if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { -+ for (i = 0; i < keys.enckeylen / sizeof(u32); i++) { -+ if (le32_to_cpu(ctx->key[i]) != -+ ((u32 *)keys.enckey)[i]) { -+ ctx->base.needs_inv = true; -+ break; -+ } -+ } -+ } - - /* Auth key */ - switch (ctx->hash_alg) { -@@ -374,21 +489,24 @@ static int safexcel_aead_setkey(struct c - keys.authkeylen, &istate, &ostate)) - goto badkey; - break; -+ case CONTEXT_CONTROL_CRYPTO_ALG_SM3: -+ if (safexcel_hmac_setkey("safexcel-sm3", keys.authkey, -+ keys.authkeylen, &istate, &ostate)) -+ goto badkey; -+ break; - default: - dev_err(priv->dev, "aead: unsupported hash algorithm\n"); - goto badkey; - } - -- crypto_aead_set_flags(ctfm, crypto_aead_get_flags(ctfm) & -- CRYPTO_TFM_RES_MASK); -- - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma && - (memcmp(ctx->ipad, istate.state, ctx->state_sz) || - memcmp(ctx->opad, ostate.state, ctx->state_sz))) - ctx->base.needs_inv = true; - - /* Now copy the keys into the context */ -- memcpy(ctx->key, keys.enckey, keys.enckeylen); -+ for (i = 0; i < keys.enckeylen / sizeof(u32); i++) -+ ctx->key[i] = cpu_to_le32(((u32 *)keys.enckey)[i]); - ctx->key_len = keys.enckeylen; - - memcpy(ctx->ipad, &istate.state, ctx->state_sz); -@@ -398,8 +516,6 @@ static int safexcel_aead_setkey(struct c - return 0; - - badkey: -- crypto_aead_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); --badkey_expflags: - memzero_explicit(&keys, sizeof(keys)); - return err; - } -@@ -423,6 +539,17 @@ static int safexcel_context_control(stru - CONTEXT_CONTROL_DIGEST_XCM | - ctx->hash_alg | - CONTEXT_CONTROL_SIZE(ctrl_size); -+ } else if (ctx->alg == SAFEXCEL_CHACHA20) { -+ /* Chacha20-Poly1305 */ -+ cdesc->control_data.control0 = -+ CONTEXT_CONTROL_KEY_EN | -+ CONTEXT_CONTROL_CRYPTO_ALG_CHACHA20 | -+ (sreq->direction == SAFEXCEL_ENCRYPT ? -+ CONTEXT_CONTROL_TYPE_ENCRYPT_HASH_OUT : -+ CONTEXT_CONTROL_TYPE_HASH_DECRYPT_IN) | -+ ctx->hash_alg | -+ CONTEXT_CONTROL_SIZE(ctrl_size); -+ return 0; - } else { - ctrl_size += ctx->state_sz / sizeof(u32) * 2; - cdesc->control_data.control0 = -@@ -431,17 +558,21 @@ static int safexcel_context_control(stru - ctx->hash_alg | - CONTEXT_CONTROL_SIZE(ctrl_size); - } -- if (sreq->direction == SAFEXCEL_ENCRYPT) -- cdesc->control_data.control0 |= -- (ctx->xcm == EIP197_XCM_MODE_CCM) ? -- CONTEXT_CONTROL_TYPE_HASH_ENCRYPT_OUT : -- CONTEXT_CONTROL_TYPE_ENCRYPT_HASH_OUT; - -+ if (sreq->direction == SAFEXCEL_ENCRYPT && -+ (ctx->xcm == EIP197_XCM_MODE_CCM || -+ ctx->aead == EIP197_AEAD_TYPE_IPSEC_ESP_GMAC)) -+ cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_TYPE_HASH_ENCRYPT_OUT; -+ else if (sreq->direction == SAFEXCEL_ENCRYPT) -+ cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_TYPE_ENCRYPT_HASH_OUT; -+ else if (ctx->xcm == EIP197_XCM_MODE_CCM) -+ cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_TYPE_DECRYPT_HASH_IN; - else - cdesc->control_data.control0 |= -- (ctx->xcm == EIP197_XCM_MODE_CCM) ? -- CONTEXT_CONTROL_TYPE_DECRYPT_HASH_IN : -- CONTEXT_CONTROL_TYPE_HASH_DECRYPT_IN; -+ CONTEXT_CONTROL_TYPE_HASH_DECRYPT_IN; - } else { - if (sreq->direction == SAFEXCEL_ENCRYPT) - cdesc->control_data.control0 = -@@ -480,6 +611,12 @@ static int safexcel_context_control(stru - ctx->key_len >> ctx->xts); - return -EINVAL; - } -+ } else if (ctx->alg == SAFEXCEL_CHACHA20) { -+ cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_CRYPTO_ALG_CHACHA20; -+ } else if (ctx->alg == SAFEXCEL_SM4) { -+ cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_CRYPTO_ALG_SM4; - } - - return 0; -@@ -563,6 +700,7 @@ static int safexcel_send_req(struct cryp - unsigned int totlen; - unsigned int totlen_src = cryptlen + assoclen; - unsigned int totlen_dst = totlen_src; -+ struct safexcel_token *atoken; - int n_cdesc = 0, n_rdesc = 0; - int queued, i, ret = 0; - bool first = true; -@@ -637,56 +775,60 @@ static int safexcel_send_req(struct cryp - - memcpy(ctx->base.ctxr->data, ctx->key, ctx->key_len); - -- /* The EIP cannot deal with zero length input packets! */ -- if (totlen == 0) -- totlen = 1; -+ if (!totlen) { -+ /* -+ * The EIP97 cannot deal with zero length input packets! -+ * So stuff a dummy command descriptor indicating a 1 byte -+ * (dummy) input packet, using the context record as source. -+ */ -+ first_cdesc = safexcel_add_cdesc(priv, ring, -+ 1, 1, ctx->base.ctxr_dma, -+ 1, 1, ctx->base.ctxr_dma, -+ &atoken); -+ if (IS_ERR(first_cdesc)) { -+ /* No space left in the command descriptor ring */ -+ ret = PTR_ERR(first_cdesc); -+ goto cdesc_rollback; -+ } -+ n_cdesc = 1; -+ goto skip_cdesc; -+ } - - /* command descriptors */ - for_each_sg(src, sg, sreq->nr_src, i) { - int len = sg_dma_len(sg); - - /* Do not overflow the request */ -- if (queued - len < 0) -+ if (queued < len) - len = queued; - - cdesc = safexcel_add_cdesc(priv, ring, !n_cdesc, - !(queued - len), - sg_dma_address(sg), len, totlen, -- ctx->base.ctxr_dma); -+ ctx->base.ctxr_dma, &atoken); - if (IS_ERR(cdesc)) { - /* No space left in the command descriptor ring */ - ret = PTR_ERR(cdesc); - goto cdesc_rollback; - } -- n_cdesc++; - -- if (n_cdesc == 1) { -+ if (!n_cdesc) - first_cdesc = cdesc; -- } - -+ n_cdesc++; - queued -= len; - if (!queued) - break; - } -- -- if (unlikely(!n_cdesc)) { -- /* -- * Special case: zero length input buffer. -- * The engine always needs the 1st command descriptor, however! -- */ -- first_cdesc = safexcel_add_cdesc(priv, ring, 1, 1, 0, 0, totlen, -- ctx->base.ctxr_dma); -- n_cdesc = 1; -- } -- -+skip_cdesc: - /* Add context control words and token to first command descriptor */ - safexcel_context_control(ctx, base, sreq, first_cdesc); - if (ctx->aead) -- safexcel_aead_token(ctx, iv, first_cdesc, -+ safexcel_aead_token(ctx, iv, first_cdesc, atoken, - sreq->direction, cryptlen, - assoclen, digestsize); - else -- safexcel_skcipher_token(ctx, iv, first_cdesc, -+ safexcel_skcipher_token(ctx, iv, first_cdesc, atoken, - cryptlen); - - /* result descriptors */ -@@ -1073,6 +1215,8 @@ static int safexcel_skcipher_cra_init(st - - ctx->base.send = safexcel_skcipher_send; - ctx->base.handle_result = safexcel_skcipher_handle_result; -+ ctx->ivmask = EIP197_OPTION_4_TOKEN_IV_CMD; -+ ctx->ctrinit = 1; - return 0; - } - -@@ -1137,6 +1281,8 @@ static int safexcel_skcipher_aes_ecb_cra - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_AES; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB; -+ ctx->blocksz = 0; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; - return 0; - } - -@@ -1171,6 +1317,7 @@ static int safexcel_skcipher_aes_cbc_cra - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_AES; -+ ctx->blocksz = AES_BLOCK_SIZE; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC; - return 0; - } -@@ -1207,6 +1354,7 @@ static int safexcel_skcipher_aes_cfb_cra - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_AES; -+ ctx->blocksz = AES_BLOCK_SIZE; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CFB; - return 0; - } -@@ -1243,6 +1391,7 @@ static int safexcel_skcipher_aes_ofb_cra - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_AES; -+ ctx->blocksz = AES_BLOCK_SIZE; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_OFB; - return 0; - } -@@ -1288,14 +1437,12 @@ static int safexcel_skcipher_aesctr_setk - /* exclude the nonce here */ - keylen = len - CTR_RFC3686_NONCE_SIZE; - ret = aes_expandkey(&aes, key, keylen); -- if (ret) { -- crypto_skcipher_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ if (ret) - return ret; -- } - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < keylen / sizeof(u32); i++) { -- if (ctx->key[i] != cpu_to_le32(aes.key_enc[i])) { -+ if (le32_to_cpu(ctx->key[i]) != aes.key_enc[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -1317,6 +1464,7 @@ static int safexcel_skcipher_aes_ctr_cra - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_AES; -+ ctx->blocksz = AES_BLOCK_SIZE; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD; - return 0; - } -@@ -1352,6 +1500,7 @@ static int safexcel_des_setkey(struct cr - unsigned int len) - { - struct safexcel_cipher_ctx *ctx = crypto_skcipher_ctx(ctfm); -+ struct safexcel_crypto_priv *priv = ctx->priv; - int ret; - - ret = verify_skcipher_des_key(ctfm, key); -@@ -1359,7 +1508,7 @@ static int safexcel_des_setkey(struct cr - return ret; - - /* if context exits and key changed, need to invalidate it */ -- if (ctx->base.ctxr_dma) -+ if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) - if (memcmp(ctx->key, key, len)) - ctx->base.needs_inv = true; - -@@ -1375,6 +1524,8 @@ static int safexcel_skcipher_des_cbc_cra - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_DES; -+ ctx->blocksz = DES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC; - return 0; - } -@@ -1412,6 +1563,8 @@ static int safexcel_skcipher_des_ecb_cra - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_DES; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB; -+ ctx->blocksz = 0; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; - return 0; - } - -@@ -1444,6 +1597,7 @@ static int safexcel_des3_ede_setkey(stru - const u8 *key, unsigned int len) - { - struct safexcel_cipher_ctx *ctx = crypto_skcipher_ctx(ctfm); -+ struct safexcel_crypto_priv *priv = ctx->priv; - int err; - - err = verify_skcipher_des3_key(ctfm, key); -@@ -1451,13 +1605,11 @@ static int safexcel_des3_ede_setkey(stru - return err; - - /* if context exits and key changed, need to invalidate it */ -- if (ctx->base.ctxr_dma) { -+ if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) - if (memcmp(ctx->key, key, len)) - ctx->base.needs_inv = true; -- } - - memcpy(ctx->key, key, len); -- - ctx->key_len = len; - - return 0; -@@ -1469,6 +1621,8 @@ static int safexcel_skcipher_des3_cbc_cr - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_3DES; -+ ctx->blocksz = DES3_EDE_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC; - return 0; - } -@@ -1506,6 +1660,8 @@ static int safexcel_skcipher_des3_ecb_cr - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_3DES; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB; -+ ctx->blocksz = 0; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; - return 0; - } - -@@ -1561,6 +1717,9 @@ static int safexcel_aead_cra_init(struct - ctx->priv = tmpl->priv; - - ctx->alg = SAFEXCEL_AES; /* default */ -+ ctx->blocksz = AES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_4_TOKEN_IV_CMD; -+ ctx->ctrinit = 1; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC; /* default */ - ctx->aead = true; - ctx->base.send = safexcel_aead_send; -@@ -1749,6 +1908,8 @@ static int safexcel_aead_sha1_des3_cra_i - - safexcel_aead_sha1_cra_init(tfm); - ctx->alg = SAFEXCEL_3DES; /* override default */ -+ ctx->blocksz = DES3_EDE_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; - return 0; - } - -@@ -1777,6 +1938,330 @@ struct safexcel_alg_template safexcel_al - }, - }; - -+static int safexcel_aead_sha256_des3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha256_cra_init(tfm); -+ ctx->alg = SAFEXCEL_3DES; /* override default */ -+ ctx->blocksz = DES3_EDE_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha256_cbc_des3_ede = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_256, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .maxauthsize = SHA256_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha256),cbc(des3_ede))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha256-cbc-des3_ede", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha256_des3_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha224_des3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha224_cra_init(tfm); -+ ctx->alg = SAFEXCEL_3DES; /* override default */ -+ ctx->blocksz = DES3_EDE_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha224_cbc_des3_ede = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_256, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .maxauthsize = SHA224_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha224),cbc(des3_ede))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha224-cbc-des3_ede", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha224_des3_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha512_des3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha512_cra_init(tfm); -+ ctx->alg = SAFEXCEL_3DES; /* override default */ -+ ctx->blocksz = DES3_EDE_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha512_cbc_des3_ede = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_512, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .maxauthsize = SHA512_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha512),cbc(des3_ede))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha512-cbc-des3_ede", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha512_des3_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha384_des3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha384_cra_init(tfm); -+ ctx->alg = SAFEXCEL_3DES; /* override default */ -+ ctx->blocksz = DES3_EDE_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha384_cbc_des3_ede = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_512, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES3_EDE_BLOCK_SIZE, -+ .maxauthsize = SHA384_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha384),cbc(des3_ede))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha384-cbc-des3_ede", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES3_EDE_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha384_des3_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha1_des_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha1_cra_init(tfm); -+ ctx->alg = SAFEXCEL_DES; /* override default */ -+ ctx->blocksz = DES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha1_cbc_des = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA1, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES_BLOCK_SIZE, -+ .maxauthsize = SHA1_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha1),cbc(des))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha1-cbc-des", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha1_des_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha256_des_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha256_cra_init(tfm); -+ ctx->alg = SAFEXCEL_DES; /* override default */ -+ ctx->blocksz = DES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha256_cbc_des = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_256, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES_BLOCK_SIZE, -+ .maxauthsize = SHA256_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha256),cbc(des))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha256-cbc-des", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha256_des_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha224_des_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha224_cra_init(tfm); -+ ctx->alg = SAFEXCEL_DES; /* override default */ -+ ctx->blocksz = DES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha224_cbc_des = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_256, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES_BLOCK_SIZE, -+ .maxauthsize = SHA224_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha224),cbc(des))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha224-cbc-des", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha224_des_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha512_des_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha512_cra_init(tfm); -+ ctx->alg = SAFEXCEL_DES; /* override default */ -+ ctx->blocksz = DES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha512_cbc_des = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_512, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES_BLOCK_SIZE, -+ .maxauthsize = SHA512_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha512),cbc(des))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha512-cbc-des", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha512_des_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sha384_des_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sha384_cra_init(tfm); -+ ctx->alg = SAFEXCEL_DES; /* override default */ -+ ctx->blocksz = DES_BLOCK_SIZE; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha384_cbc_des = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_DES | SAFEXCEL_ALG_SHA2_512, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = DES_BLOCK_SIZE, -+ .maxauthsize = SHA384_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha384),cbc(des))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha384-cbc-des", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = DES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sha384_des_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ - static int safexcel_aead_sha1_ctr_cra_init(struct crypto_tfm *tfm) - { - struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -@@ -1965,14 +2450,12 @@ static int safexcel_skcipher_aesxts_setk - /* Only half of the key data is cipher key */ - keylen = (len >> 1); - ret = aes_expandkey(&aes, key, keylen); -- if (ret) { -- crypto_skcipher_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ if (ret) - return ret; -- } - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < keylen / sizeof(u32); i++) { -- if (ctx->key[i] != cpu_to_le32(aes.key_enc[i])) { -+ if (le32_to_cpu(ctx->key[i]) != aes.key_enc[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -1984,15 +2467,13 @@ static int safexcel_skcipher_aesxts_setk - - /* The other half is the tweak key */ - ret = aes_expandkey(&aes, (u8 *)(key + keylen), keylen); -- if (ret) { -- crypto_skcipher_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); -+ if (ret) - return ret; -- } - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < keylen / sizeof(u32); i++) { -- if (ctx->key[i + keylen / sizeof(u32)] != -- cpu_to_le32(aes.key_enc[i])) { -+ if (le32_to_cpu(ctx->key[i + keylen / sizeof(u32)]) != -+ aes.key_enc[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -2015,6 +2496,7 @@ static int safexcel_skcipher_aes_xts_cra - - safexcel_skcipher_cra_init(tfm); - ctx->alg = SAFEXCEL_AES; -+ ctx->blocksz = AES_BLOCK_SIZE; - ctx->xts = 1; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_XTS; - return 0; -@@ -2075,14 +2557,13 @@ static int safexcel_aead_gcm_setkey(stru - - ret = aes_expandkey(&aes, key, len); - if (ret) { -- crypto_aead_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - memzero_explicit(&aes, sizeof(aes)); - return ret; - } - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < len / sizeof(u32); i++) { -- if (ctx->key[i] != cpu_to_le32(aes.key_enc[i])) { -+ if (le32_to_cpu(ctx->key[i]) != aes.key_enc[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -2099,8 +2580,6 @@ static int safexcel_aead_gcm_setkey(stru - crypto_cipher_set_flags(ctx->hkaes, crypto_aead_get_flags(ctfm) & - CRYPTO_TFM_REQ_MASK); - ret = crypto_cipher_setkey(ctx->hkaes, key, len); -- crypto_aead_set_flags(ctfm, crypto_cipher_get_flags(ctx->hkaes) & -- CRYPTO_TFM_RES_MASK); - if (ret) - return ret; - -@@ -2109,7 +2588,7 @@ static int safexcel_aead_gcm_setkey(stru - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < AES_BLOCK_SIZE / sizeof(u32); i++) { -- if (ctx->ipad[i] != cpu_to_be32(hashkey[i])) { -+ if (be32_to_cpu(ctx->ipad[i]) != hashkey[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -2135,10 +2614,7 @@ static int safexcel_aead_gcm_cra_init(st - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_XCM; /* override default */ - - ctx->hkaes = crypto_alloc_cipher("aes", 0, 0); -- if (IS_ERR(ctx->hkaes)) -- return PTR_ERR(ctx->hkaes); -- -- return 0; -+ return PTR_ERR_OR_ZERO(ctx->hkaes); - } - - static void safexcel_aead_gcm_cra_exit(struct crypto_tfm *tfm) -@@ -2192,14 +2668,13 @@ static int safexcel_aead_ccm_setkey(stru - - ret = aes_expandkey(&aes, key, len); - if (ret) { -- crypto_aead_set_flags(ctfm, CRYPTO_TFM_RES_BAD_KEY_LEN); - memzero_explicit(&aes, sizeof(aes)); - return ret; - } - - if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) { - for (i = 0; i < len / sizeof(u32); i++) { -- if (ctx->key[i] != cpu_to_le32(aes.key_enc[i])) { -+ if (le32_to_cpu(ctx->key[i]) != aes.key_enc[i]) { - ctx->base.needs_inv = true; - break; - } -@@ -2235,6 +2710,7 @@ static int safexcel_aead_ccm_cra_init(st - ctx->state_sz = 3 * AES_BLOCK_SIZE; - ctx->xcm = EIP197_XCM_MODE_CCM; - ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_XCM; /* override default */ -+ ctx->ctrinit = 0; - return 0; - } - -@@ -2301,5 +2777,949 @@ struct safexcel_alg_template safexcel_al - .cra_exit = safexcel_aead_cra_exit, - .cra_module = THIS_MODULE, - }, -+ }, -+}; -+ -+static void safexcel_chacha20_setkey(struct safexcel_cipher_ctx *ctx, -+ const u8 *key) -+{ -+ struct safexcel_crypto_priv *priv = ctx->priv; -+ -+ if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) -+ if (memcmp(ctx->key, key, CHACHA_KEY_SIZE)) -+ ctx->base.needs_inv = true; -+ -+ memcpy(ctx->key, key, CHACHA_KEY_SIZE); -+ ctx->key_len = CHACHA_KEY_SIZE; -+} -+ -+static int safexcel_skcipher_chacha20_setkey(struct crypto_skcipher *ctfm, -+ const u8 *key, unsigned int len) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_skcipher_ctx(ctfm); -+ -+ if (len != CHACHA_KEY_SIZE) -+ return -EINVAL; -+ -+ safexcel_chacha20_setkey(ctx, key); -+ -+ return 0; -+} -+ -+static int safexcel_skcipher_chacha20_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_skcipher_cra_init(tfm); -+ ctx->alg = SAFEXCEL_CHACHA20; -+ ctx->ctrinit = 0; -+ ctx->mode = CONTEXT_CONTROL_CHACHA20_MODE_256_32; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_chacha20 = { -+ .type = SAFEXCEL_ALG_TYPE_SKCIPHER, -+ .algo_mask = SAFEXCEL_ALG_CHACHA20, -+ .alg.skcipher = { -+ .setkey = safexcel_skcipher_chacha20_setkey, -+ .encrypt = safexcel_encrypt, -+ .decrypt = safexcel_decrypt, -+ .min_keysize = CHACHA_KEY_SIZE, -+ .max_keysize = CHACHA_KEY_SIZE, -+ .ivsize = CHACHA_IV_SIZE, -+ .base = { -+ .cra_name = "chacha20", -+ .cra_driver_name = "safexcel-chacha20", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_skcipher_chacha20_cra_init, -+ .cra_exit = safexcel_skcipher_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_chachapoly_setkey(struct crypto_aead *ctfm, -+ const u8 *key, unsigned int len) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_aead_ctx(ctfm); -+ -+ if (ctx->aead == EIP197_AEAD_TYPE_IPSEC_ESP && -+ len > EIP197_AEAD_IPSEC_NONCE_SIZE) { -+ /* ESP variant has nonce appended to key */ -+ len -= EIP197_AEAD_IPSEC_NONCE_SIZE; -+ ctx->nonce = *(u32 *)(key + len); -+ } -+ if (len != CHACHA_KEY_SIZE) -+ return -EINVAL; -+ -+ safexcel_chacha20_setkey(ctx, key); -+ -+ return 0; -+} -+ -+static int safexcel_aead_chachapoly_setauthsize(struct crypto_aead *tfm, -+ unsigned int authsize) -+{ -+ if (authsize != POLY1305_DIGEST_SIZE) -+ return -EINVAL; -+ return 0; -+} -+ -+static int safexcel_aead_chachapoly_crypt(struct aead_request *req, -+ enum safexcel_cipher_direction dir) -+{ -+ struct safexcel_cipher_req *creq = aead_request_ctx(req); -+ struct crypto_aead *aead = crypto_aead_reqtfm(req); -+ struct crypto_tfm *tfm = crypto_aead_tfm(aead); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ struct aead_request *subreq = aead_request_ctx(req); -+ u32 key[CHACHA_KEY_SIZE / sizeof(u32) + 1]; -+ int ret = 0; -+ -+ /* -+ * Instead of wasting time detecting umpteen silly corner cases, -+ * just dump all "small" requests to the fallback implementation. -+ * HW would not be faster on such small requests anyway. -+ */ -+ if (likely((ctx->aead != EIP197_AEAD_TYPE_IPSEC_ESP || -+ req->assoclen >= EIP197_AEAD_IPSEC_IV_SIZE) && -+ req->cryptlen > POLY1305_DIGEST_SIZE)) { -+ return safexcel_queue_req(&req->base, creq, dir); -+ } -+ -+ /* HW cannot do full (AAD+payload) zero length, use fallback */ -+ memcpy(key, ctx->key, CHACHA_KEY_SIZE); -+ if (ctx->aead == EIP197_AEAD_TYPE_IPSEC_ESP) { -+ /* ESP variant has nonce appended to the key */ -+ key[CHACHA_KEY_SIZE / sizeof(u32)] = ctx->nonce; -+ ret = crypto_aead_setkey(ctx->fback, (u8 *)key, -+ CHACHA_KEY_SIZE + -+ EIP197_AEAD_IPSEC_NONCE_SIZE); -+ } else { -+ ret = crypto_aead_setkey(ctx->fback, (u8 *)key, -+ CHACHA_KEY_SIZE); -+ } -+ if (ret) { -+ crypto_aead_clear_flags(aead, CRYPTO_TFM_REQ_MASK); -+ crypto_aead_set_flags(aead, crypto_aead_get_flags(ctx->fback) & -+ CRYPTO_TFM_REQ_MASK); -+ return ret; -+ } -+ -+ aead_request_set_tfm(subreq, ctx->fback); -+ aead_request_set_callback(subreq, req->base.flags, req->base.complete, -+ req->base.data); -+ aead_request_set_crypt(subreq, req->src, req->dst, req->cryptlen, -+ req->iv); -+ aead_request_set_ad(subreq, req->assoclen); -+ -+ return (dir == SAFEXCEL_ENCRYPT) ? -+ crypto_aead_encrypt(subreq) : -+ crypto_aead_decrypt(subreq); -+} -+ -+static int safexcel_aead_chachapoly_encrypt(struct aead_request *req) -+{ -+ return safexcel_aead_chachapoly_crypt(req, SAFEXCEL_ENCRYPT); -+} -+ -+static int safexcel_aead_chachapoly_decrypt(struct aead_request *req) -+{ -+ return safexcel_aead_chachapoly_crypt(req, SAFEXCEL_DECRYPT); -+} -+ -+static int safexcel_aead_fallback_cra_init(struct crypto_tfm *tfm) -+{ -+ struct crypto_aead *aead = __crypto_aead_cast(tfm); -+ struct aead_alg *alg = crypto_aead_alg(aead); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_cra_init(tfm); -+ -+ /* Allocate fallback implementation */ -+ ctx->fback = crypto_alloc_aead(alg->base.cra_name, 0, -+ CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_NEED_FALLBACK); -+ if (IS_ERR(ctx->fback)) -+ return PTR_ERR(ctx->fback); -+ -+ crypto_aead_set_reqsize(aead, max(sizeof(struct safexcel_cipher_req), -+ sizeof(struct aead_request) + -+ crypto_aead_reqsize(ctx->fback))); -+ -+ return 0; -+} -+ -+static int safexcel_aead_chachapoly_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_fallback_cra_init(tfm); -+ ctx->alg = SAFEXCEL_CHACHA20; -+ ctx->mode = CONTEXT_CONTROL_CHACHA20_MODE_256_32 | -+ CONTEXT_CONTROL_CHACHA20_MODE_CALC_OTK; -+ ctx->ctrinit = 0; -+ ctx->hash_alg = CONTEXT_CONTROL_CRYPTO_ALG_POLY1305; -+ ctx->state_sz = 0; /* Precomputed by HW */ -+ return 0; -+} -+ -+static void safexcel_aead_fallback_cra_exit(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ crypto_free_aead(ctx->fback); -+ safexcel_aead_cra_exit(tfm); -+} -+ -+struct safexcel_alg_template safexcel_alg_chachapoly = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_CHACHA20 | SAFEXCEL_ALG_POLY1305, -+ .alg.aead = { -+ .setkey = safexcel_aead_chachapoly_setkey, -+ .setauthsize = safexcel_aead_chachapoly_setauthsize, -+ .encrypt = safexcel_aead_chachapoly_encrypt, -+ .decrypt = safexcel_aead_chachapoly_decrypt, -+ .ivsize = CHACHAPOLY_IV_SIZE, -+ .maxauthsize = POLY1305_DIGEST_SIZE, -+ .base = { -+ .cra_name = "rfc7539(chacha20,poly1305)", -+ .cra_driver_name = "safexcel-chacha20-poly1305", -+ /* +1 to put it above HW chacha + SW poly */ -+ .cra_priority = SAFEXCEL_CRA_PRIORITY + 1, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_chachapoly_cra_init, -+ .cra_exit = safexcel_aead_fallback_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_chachapolyesp_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ ret = safexcel_aead_chachapoly_cra_init(tfm); -+ ctx->aead = EIP197_AEAD_TYPE_IPSEC_ESP; -+ ctx->aadskip = EIP197_AEAD_IPSEC_IV_SIZE; -+ return ret; -+} -+ -+struct safexcel_alg_template safexcel_alg_chachapoly_esp = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_CHACHA20 | SAFEXCEL_ALG_POLY1305, -+ .alg.aead = { -+ .setkey = safexcel_aead_chachapoly_setkey, -+ .setauthsize = safexcel_aead_chachapoly_setauthsize, -+ .encrypt = safexcel_aead_chachapoly_encrypt, -+ .decrypt = safexcel_aead_chachapoly_decrypt, -+ .ivsize = CHACHAPOLY_IV_SIZE - EIP197_AEAD_IPSEC_NONCE_SIZE, -+ .maxauthsize = POLY1305_DIGEST_SIZE, -+ .base = { -+ .cra_name = "rfc7539esp(chacha20,poly1305)", -+ .cra_driver_name = "safexcel-chacha20-poly1305-esp", -+ /* +1 to put it above HW chacha + SW poly */ -+ .cra_priority = SAFEXCEL_CRA_PRIORITY + 1, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_chachapolyesp_cra_init, -+ .cra_exit = safexcel_aead_fallback_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_skcipher_sm4_setkey(struct crypto_skcipher *ctfm, -+ const u8 *key, unsigned int len) -+{ -+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ctfm); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ struct safexcel_crypto_priv *priv = ctx->priv; -+ -+ if (len != SM4_KEY_SIZE) -+ return -EINVAL; -+ -+ if (priv->flags & EIP197_TRC_CACHE && ctx->base.ctxr_dma) -+ if (memcmp(ctx->key, key, SM4_KEY_SIZE)) -+ ctx->base.needs_inv = true; -+ -+ memcpy(ctx->key, key, SM4_KEY_SIZE); -+ ctx->key_len = SM4_KEY_SIZE; -+ -+ return 0; -+} -+ -+static int safexcel_sm4_blk_encrypt(struct skcipher_request *req) -+{ -+ /* Workaround for HW bug: EIP96 4.3 does not report blocksize error */ -+ if (req->cryptlen & (SM4_BLOCK_SIZE - 1)) -+ return -EINVAL; -+ else -+ return safexcel_queue_req(&req->base, skcipher_request_ctx(req), -+ SAFEXCEL_ENCRYPT); -+} -+ -+static int safexcel_sm4_blk_decrypt(struct skcipher_request *req) -+{ -+ /* Workaround for HW bug: EIP96 4.3 does not report blocksize error */ -+ if (req->cryptlen & (SM4_BLOCK_SIZE - 1)) -+ return -EINVAL; -+ else -+ return safexcel_queue_req(&req->base, skcipher_request_ctx(req), -+ SAFEXCEL_DECRYPT); -+} -+ -+static int safexcel_skcipher_sm4_ecb_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_skcipher_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_ECB; -+ ctx->blocksz = 0; -+ ctx->ivmask = EIP197_OPTION_2_TOKEN_IV_CMD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_ecb_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_SKCIPHER, -+ .algo_mask = SAFEXCEL_ALG_SM4, -+ .alg.skcipher = { -+ .setkey = safexcel_skcipher_sm4_setkey, -+ .encrypt = safexcel_sm4_blk_encrypt, -+ .decrypt = safexcel_sm4_blk_decrypt, -+ .min_keysize = SM4_KEY_SIZE, -+ .max_keysize = SM4_KEY_SIZE, -+ .base = { -+ .cra_name = "ecb(sm4)", -+ .cra_driver_name = "safexcel-ecb-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = SM4_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_skcipher_sm4_ecb_cra_init, -+ .cra_exit = safexcel_skcipher_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_skcipher_sm4_cbc_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_skcipher_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->blocksz = SM4_BLOCK_SIZE; -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CBC; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_cbc_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_SKCIPHER, -+ .algo_mask = SAFEXCEL_ALG_SM4, -+ .alg.skcipher = { -+ .setkey = safexcel_skcipher_sm4_setkey, -+ .encrypt = safexcel_sm4_blk_encrypt, -+ .decrypt = safexcel_sm4_blk_decrypt, -+ .min_keysize = SM4_KEY_SIZE, -+ .max_keysize = SM4_KEY_SIZE, -+ .ivsize = SM4_BLOCK_SIZE, -+ .base = { -+ .cra_name = "cbc(sm4)", -+ .cra_driver_name = "safexcel-cbc-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = SM4_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_skcipher_sm4_cbc_cra_init, -+ .cra_exit = safexcel_skcipher_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_skcipher_sm4_ofb_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_skcipher_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->blocksz = SM4_BLOCK_SIZE; -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_OFB; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_ofb_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_SKCIPHER, -+ .algo_mask = SAFEXCEL_ALG_SM4 | SAFEXCEL_ALG_AES_XFB, -+ .alg.skcipher = { -+ .setkey = safexcel_skcipher_sm4_setkey, -+ .encrypt = safexcel_encrypt, -+ .decrypt = safexcel_decrypt, -+ .min_keysize = SM4_KEY_SIZE, -+ .max_keysize = SM4_KEY_SIZE, -+ .ivsize = SM4_BLOCK_SIZE, -+ .base = { -+ .cra_name = "ofb(sm4)", -+ .cra_driver_name = "safexcel-ofb-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_skcipher_sm4_ofb_cra_init, -+ .cra_exit = safexcel_skcipher_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_skcipher_sm4_cfb_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_skcipher_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->blocksz = SM4_BLOCK_SIZE; -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CFB; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_cfb_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_SKCIPHER, -+ .algo_mask = SAFEXCEL_ALG_SM4 | SAFEXCEL_ALG_AES_XFB, -+ .alg.skcipher = { -+ .setkey = safexcel_skcipher_sm4_setkey, -+ .encrypt = safexcel_encrypt, -+ .decrypt = safexcel_decrypt, -+ .min_keysize = SM4_KEY_SIZE, -+ .max_keysize = SM4_KEY_SIZE, -+ .ivsize = SM4_BLOCK_SIZE, -+ .base = { -+ .cra_name = "cfb(sm4)", -+ .cra_driver_name = "safexcel-cfb-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_skcipher_sm4_cfb_cra_init, -+ .cra_exit = safexcel_skcipher_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_skcipher_sm4ctr_setkey(struct crypto_skcipher *ctfm, -+ const u8 *key, unsigned int len) -+{ -+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ctfm); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ /* last 4 bytes of key are the nonce! */ -+ ctx->nonce = *(u32 *)(key + len - CTR_RFC3686_NONCE_SIZE); -+ /* exclude the nonce here */ -+ len -= CTR_RFC3686_NONCE_SIZE; -+ -+ return safexcel_skcipher_sm4_setkey(ctfm, key, len); -+} -+ -+static int safexcel_skcipher_sm4_ctr_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_skcipher_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->blocksz = SM4_BLOCK_SIZE; -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_ctr_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_SKCIPHER, -+ .algo_mask = SAFEXCEL_ALG_SM4, -+ .alg.skcipher = { -+ .setkey = safexcel_skcipher_sm4ctr_setkey, -+ .encrypt = safexcel_encrypt, -+ .decrypt = safexcel_decrypt, -+ /* Add nonce size */ -+ .min_keysize = SM4_KEY_SIZE + CTR_RFC3686_NONCE_SIZE, -+ .max_keysize = SM4_KEY_SIZE + CTR_RFC3686_NONCE_SIZE, -+ .ivsize = CTR_RFC3686_IV_SIZE, -+ .base = { -+ .cra_name = "rfc3686(ctr(sm4))", -+ .cra_driver_name = "safexcel-ctr-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_skcipher_sm4_ctr_cra_init, -+ .cra_exit = safexcel_skcipher_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sm4_blk_encrypt(struct aead_request *req) -+{ -+ /* Workaround for HW bug: EIP96 4.3 does not report blocksize error */ -+ if (req->cryptlen & (SM4_BLOCK_SIZE - 1)) -+ return -EINVAL; -+ -+ return safexcel_queue_req(&req->base, aead_request_ctx(req), -+ SAFEXCEL_ENCRYPT); -+} -+ -+static int safexcel_aead_sm4_blk_decrypt(struct aead_request *req) -+{ -+ struct crypto_aead *tfm = crypto_aead_reqtfm(req); -+ -+ /* Workaround for HW bug: EIP96 4.3 does not report blocksize error */ -+ if ((req->cryptlen - crypto_aead_authsize(tfm)) & (SM4_BLOCK_SIZE - 1)) -+ return -EINVAL; -+ -+ return safexcel_queue_req(&req->base, aead_request_ctx(req), -+ SAFEXCEL_DECRYPT); -+} -+ -+static int safexcel_aead_sm4cbc_sha1_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->blocksz = SM4_BLOCK_SIZE; -+ ctx->hash_alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA1; -+ ctx->state_sz = SHA1_DIGEST_SIZE; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha1_cbc_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_SM4 | SAFEXCEL_ALG_SHA1, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_sm4_blk_encrypt, -+ .decrypt = safexcel_aead_sm4_blk_decrypt, -+ .ivsize = SM4_BLOCK_SIZE, -+ .maxauthsize = SHA1_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha1),cbc(sm4))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha1-cbc-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = SM4_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sm4cbc_sha1_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_fallback_setkey(struct crypto_aead *ctfm, -+ const u8 *key, unsigned int len) -+{ -+ struct crypto_tfm *tfm = crypto_aead_tfm(ctfm); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ /* Keep fallback cipher synchronized */ -+ return crypto_aead_setkey(ctx->fback, (u8 *)key, len) ?: -+ safexcel_aead_setkey(ctfm, key, len); -+} -+ -+static int safexcel_aead_fallback_setauthsize(struct crypto_aead *ctfm, -+ unsigned int authsize) -+{ -+ struct crypto_tfm *tfm = crypto_aead_tfm(ctfm); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ /* Keep fallback cipher synchronized */ -+ return crypto_aead_setauthsize(ctx->fback, authsize); -+} -+ -+static int safexcel_aead_fallback_crypt(struct aead_request *req, -+ enum safexcel_cipher_direction dir) -+{ -+ struct crypto_aead *aead = crypto_aead_reqtfm(req); -+ struct crypto_tfm *tfm = crypto_aead_tfm(aead); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ struct aead_request *subreq = aead_request_ctx(req); -+ -+ aead_request_set_tfm(subreq, ctx->fback); -+ aead_request_set_callback(subreq, req->base.flags, req->base.complete, -+ req->base.data); -+ aead_request_set_crypt(subreq, req->src, req->dst, req->cryptlen, -+ req->iv); -+ aead_request_set_ad(subreq, req->assoclen); -+ -+ return (dir == SAFEXCEL_ENCRYPT) ? -+ crypto_aead_encrypt(subreq) : -+ crypto_aead_decrypt(subreq); -+} -+ -+static int safexcel_aead_sm4cbc_sm3_encrypt(struct aead_request *req) -+{ -+ struct safexcel_cipher_req *creq = aead_request_ctx(req); -+ -+ /* Workaround for HW bug: EIP96 4.3 does not report blocksize error */ -+ if (req->cryptlen & (SM4_BLOCK_SIZE - 1)) -+ return -EINVAL; -+ else if (req->cryptlen || req->assoclen) /* If input length > 0 only */ -+ return safexcel_queue_req(&req->base, creq, SAFEXCEL_ENCRYPT); -+ -+ /* HW cannot do full (AAD+payload) zero length, use fallback */ -+ return safexcel_aead_fallback_crypt(req, SAFEXCEL_ENCRYPT); -+} -+ -+static int safexcel_aead_sm4cbc_sm3_decrypt(struct aead_request *req) -+{ -+ struct safexcel_cipher_req *creq = aead_request_ctx(req); -+ struct crypto_aead *tfm = crypto_aead_reqtfm(req); -+ -+ /* Workaround for HW bug: EIP96 4.3 does not report blocksize error */ -+ if ((req->cryptlen - crypto_aead_authsize(tfm)) & (SM4_BLOCK_SIZE - 1)) -+ return -EINVAL; -+ else if (req->cryptlen > crypto_aead_authsize(tfm) || req->assoclen) -+ /* If input length > 0 only */ -+ return safexcel_queue_req(&req->base, creq, SAFEXCEL_DECRYPT); -+ -+ /* HW cannot do full (AAD+payload) zero length, use fallback */ -+ return safexcel_aead_fallback_crypt(req, SAFEXCEL_DECRYPT); -+} -+ -+static int safexcel_aead_sm4cbc_sm3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_fallback_cra_init(tfm); -+ ctx->alg = SAFEXCEL_SM4; -+ ctx->blocksz = SM4_BLOCK_SIZE; -+ ctx->hash_alg = CONTEXT_CONTROL_CRYPTO_ALG_SM3; -+ ctx->state_sz = SM3_DIGEST_SIZE; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sm3_cbc_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_SM4 | SAFEXCEL_ALG_SM3, -+ .alg.aead = { -+ .setkey = safexcel_aead_fallback_setkey, -+ .setauthsize = safexcel_aead_fallback_setauthsize, -+ .encrypt = safexcel_aead_sm4cbc_sm3_encrypt, -+ .decrypt = safexcel_aead_sm4cbc_sm3_decrypt, -+ .ivsize = SM4_BLOCK_SIZE, -+ .maxauthsize = SM3_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sm3),cbc(sm4))", -+ .cra_driver_name = "safexcel-authenc-hmac-sm3-cbc-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SM4_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sm4cbc_sm3_cra_init, -+ .cra_exit = safexcel_aead_fallback_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sm4ctr_sha1_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sm4cbc_sha1_cra_init(tfm); -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sha1_ctr_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_SM4 | SAFEXCEL_ALG_SHA1, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = CTR_RFC3686_IV_SIZE, -+ .maxauthsize = SHA1_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sha1),rfc3686(ctr(sm4)))", -+ .cra_driver_name = "safexcel-authenc-hmac-sha1-ctr-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sm4ctr_sha1_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_aead_sm4ctr_sm3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_aead_sm4cbc_sm3_cra_init(tfm); -+ ctx->mode = CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD; -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_authenc_hmac_sm3_ctr_sm4 = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_SM4 | SAFEXCEL_ALG_SM3, -+ .alg.aead = { -+ .setkey = safexcel_aead_setkey, -+ .encrypt = safexcel_aead_encrypt, -+ .decrypt = safexcel_aead_decrypt, -+ .ivsize = CTR_RFC3686_IV_SIZE, -+ .maxauthsize = SM3_DIGEST_SIZE, -+ .base = { -+ .cra_name = "authenc(hmac(sm3),rfc3686(ctr(sm4)))", -+ .cra_driver_name = "safexcel-authenc-hmac-sm3-ctr-sm4", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_aead_sm4ctr_sm3_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+}; -+ -+static int safexcel_rfc4106_gcm_setkey(struct crypto_aead *ctfm, const u8 *key, -+ unsigned int len) -+{ -+ struct crypto_tfm *tfm = crypto_aead_tfm(ctfm); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ /* last 4 bytes of key are the nonce! */ -+ ctx->nonce = *(u32 *)(key + len - CTR_RFC3686_NONCE_SIZE); -+ -+ len -= CTR_RFC3686_NONCE_SIZE; -+ return safexcel_aead_gcm_setkey(ctfm, key, len); -+} -+ -+static int safexcel_rfc4106_gcm_setauthsize(struct crypto_aead *tfm, -+ unsigned int authsize) -+{ -+ return crypto_rfc4106_check_authsize(authsize); -+} -+ -+static int safexcel_rfc4106_encrypt(struct aead_request *req) -+{ -+ return crypto_ipsec_check_assoclen(req->assoclen) ?: -+ safexcel_aead_encrypt(req); -+} -+ -+static int safexcel_rfc4106_decrypt(struct aead_request *req) -+{ -+ return crypto_ipsec_check_assoclen(req->assoclen) ?: -+ safexcel_aead_decrypt(req); -+} -+ -+static int safexcel_rfc4106_gcm_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ ret = safexcel_aead_gcm_cra_init(tfm); -+ ctx->aead = EIP197_AEAD_TYPE_IPSEC_ESP; -+ ctx->aadskip = EIP197_AEAD_IPSEC_IV_SIZE; -+ return ret; -+} -+ -+struct safexcel_alg_template safexcel_alg_rfc4106_gcm = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_AES | SAFEXCEL_ALG_GHASH, -+ .alg.aead = { -+ .setkey = safexcel_rfc4106_gcm_setkey, -+ .setauthsize = safexcel_rfc4106_gcm_setauthsize, -+ .encrypt = safexcel_rfc4106_encrypt, -+ .decrypt = safexcel_rfc4106_decrypt, -+ .ivsize = GCM_RFC4106_IV_SIZE, -+ .maxauthsize = GHASH_DIGEST_SIZE, -+ .base = { -+ .cra_name = "rfc4106(gcm(aes))", -+ .cra_driver_name = "safexcel-rfc4106-gcm-aes", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_rfc4106_gcm_cra_init, -+ .cra_exit = safexcel_aead_gcm_cra_exit, -+ }, -+ }, -+}; -+ -+static int safexcel_rfc4543_gcm_setauthsize(struct crypto_aead *tfm, -+ unsigned int authsize) -+{ -+ if (authsize != GHASH_DIGEST_SIZE) -+ return -EINVAL; -+ -+ return 0; -+} -+ -+static int safexcel_rfc4543_gcm_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ ret = safexcel_aead_gcm_cra_init(tfm); -+ ctx->aead = EIP197_AEAD_TYPE_IPSEC_ESP_GMAC; -+ return ret; -+} -+ -+struct safexcel_alg_template safexcel_alg_rfc4543_gcm = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_AES | SAFEXCEL_ALG_GHASH, -+ .alg.aead = { -+ .setkey = safexcel_rfc4106_gcm_setkey, -+ .setauthsize = safexcel_rfc4543_gcm_setauthsize, -+ .encrypt = safexcel_rfc4106_encrypt, -+ .decrypt = safexcel_rfc4106_decrypt, -+ .ivsize = GCM_RFC4543_IV_SIZE, -+ .maxauthsize = GHASH_DIGEST_SIZE, -+ .base = { -+ .cra_name = "rfc4543(gcm(aes))", -+ .cra_driver_name = "safexcel-rfc4543-gcm-aes", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_rfc4543_gcm_cra_init, -+ .cra_exit = safexcel_aead_gcm_cra_exit, -+ }, -+ }, -+}; -+ -+static int safexcel_rfc4309_ccm_setkey(struct crypto_aead *ctfm, const u8 *key, -+ unsigned int len) -+{ -+ struct crypto_tfm *tfm = crypto_aead_tfm(ctfm); -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ /* First byte of the nonce = L = always 3 for RFC4309 (4 byte ctr) */ -+ *(u8 *)&ctx->nonce = EIP197_AEAD_IPSEC_COUNTER_SIZE - 1; -+ /* last 3 bytes of key are the nonce! */ -+ memcpy((u8 *)&ctx->nonce + 1, key + len - -+ EIP197_AEAD_IPSEC_CCM_NONCE_SIZE, -+ EIP197_AEAD_IPSEC_CCM_NONCE_SIZE); -+ -+ len -= EIP197_AEAD_IPSEC_CCM_NONCE_SIZE; -+ return safexcel_aead_ccm_setkey(ctfm, key, len); -+} -+ -+static int safexcel_rfc4309_ccm_setauthsize(struct crypto_aead *tfm, -+ unsigned int authsize) -+{ -+ /* Borrowed from crypto/ccm.c */ -+ switch (authsize) { -+ case 8: -+ case 12: -+ case 16: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int safexcel_rfc4309_ccm_encrypt(struct aead_request *req) -+{ -+ struct safexcel_cipher_req *creq = aead_request_ctx(req); -+ -+ /* Borrowed from crypto/ccm.c */ -+ if (req->assoclen != 16 && req->assoclen != 20) -+ return -EINVAL; -+ -+ return safexcel_queue_req(&req->base, creq, SAFEXCEL_ENCRYPT); -+} -+ -+static int safexcel_rfc4309_ccm_decrypt(struct aead_request *req) -+{ -+ struct safexcel_cipher_req *creq = aead_request_ctx(req); -+ -+ /* Borrowed from crypto/ccm.c */ -+ if (req->assoclen != 16 && req->assoclen != 20) -+ return -EINVAL; -+ -+ return safexcel_queue_req(&req->base, creq, SAFEXCEL_DECRYPT); -+} -+ -+static int safexcel_rfc4309_ccm_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_cipher_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ ret = safexcel_aead_ccm_cra_init(tfm); -+ ctx->aead = EIP197_AEAD_TYPE_IPSEC_ESP; -+ ctx->aadskip = EIP197_AEAD_IPSEC_IV_SIZE; -+ return ret; -+} -+ -+struct safexcel_alg_template safexcel_alg_rfc4309_ccm = { -+ .type = SAFEXCEL_ALG_TYPE_AEAD, -+ .algo_mask = SAFEXCEL_ALG_AES | SAFEXCEL_ALG_CBC_MAC_ALL, -+ .alg.aead = { -+ .setkey = safexcel_rfc4309_ccm_setkey, -+ .setauthsize = safexcel_rfc4309_ccm_setauthsize, -+ .encrypt = safexcel_rfc4309_ccm_encrypt, -+ .decrypt = safexcel_rfc4309_ccm_decrypt, -+ .ivsize = EIP197_AEAD_IPSEC_IV_SIZE, -+ .maxauthsize = AES_BLOCK_SIZE, -+ .base = { -+ .cra_name = "rfc4309(ccm(aes))", -+ .cra_driver_name = "safexcel-rfc4309-ccm-aes", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_cipher_ctx), -+ .cra_alignmask = 0, -+ .cra_init = safexcel_rfc4309_ccm_cra_init, -+ .cra_exit = safexcel_aead_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, - }, - }; ---- a/drivers/crypto/inside-secure/safexcel.h -+++ b/drivers/crypto/inside-secure/safexcel.h -@@ -17,8 +17,11 @@ - #define EIP197_HIA_VERSION_BE 0xca35 - #define EIP197_HIA_VERSION_LE 0x35ca - #define EIP97_VERSION_LE 0x9e61 -+#define EIP196_VERSION_LE 0x3bc4 - #define EIP197_VERSION_LE 0x3ac5 - #define EIP96_VERSION_LE 0x9f60 -+#define EIP201_VERSION_LE 0x36c9 -+#define EIP206_VERSION_LE 0x31ce - #define EIP197_REG_LO16(reg) (reg & 0xffff) - #define EIP197_REG_HI16(reg) ((reg >> 16) & 0xffff) - #define EIP197_VERSION_MASK(reg) ((reg >> 16) & 0xfff) -@@ -26,12 +29,23 @@ - ((reg >> 4) & 0xf0) | \ - ((reg >> 12) & 0xf)) - -+/* EIP197 HIA OPTIONS ENCODING */ -+#define EIP197_HIA_OPT_HAS_PE_ARB BIT(29) -+ -+/* EIP206 OPTIONS ENCODING */ -+#define EIP206_OPT_ICE_TYPE(n) ((n>>8)&3) -+ -+/* EIP197 OPTIONS ENCODING */ -+#define EIP197_OPT_HAS_TRC BIT(31) -+ - /* Static configuration */ - #define EIP197_DEFAULT_RING_SIZE 400 --#define EIP197_MAX_TOKENS 18 -+#define EIP197_EMB_TOKENS 4 /* Pad CD to 16 dwords */ -+#define EIP197_MAX_TOKENS 16 - #define EIP197_MAX_RINGS 4 - #define EIP197_FETCH_DEPTH 2 - #define EIP197_MAX_BATCH_SZ 64 -+#define EIP197_MAX_RING_AIC 14 - - #define EIP197_GFP_FLAGS(base) ((base).flags & CRYPTO_TFM_REQ_MAY_SLEEP ? \ - GFP_KERNEL : GFP_ATOMIC) -@@ -138,6 +152,7 @@ - #define EIP197_HIA_AIC_R_ENABLED_STAT(r) (0xe010 - EIP197_HIA_AIC_R_OFF(r)) - #define EIP197_HIA_AIC_R_ACK(r) (0xe010 - EIP197_HIA_AIC_R_OFF(r)) - #define EIP197_HIA_AIC_R_ENABLE_CLR(r) (0xe014 - EIP197_HIA_AIC_R_OFF(r)) -+#define EIP197_HIA_AIC_R_VERSION(r) (0xe01c - EIP197_HIA_AIC_R_OFF(r)) - #define EIP197_HIA_AIC_G_ENABLE_CTRL 0xf808 - #define EIP197_HIA_AIC_G_ENABLED_STAT 0xf810 - #define EIP197_HIA_AIC_G_ACK 0xf810 -@@ -157,12 +172,16 @@ - #define EIP197_PE_EIP96_FUNCTION_EN(n) (0x1004 + (0x2000 * (n))) - #define EIP197_PE_EIP96_CONTEXT_CTRL(n) (0x1008 + (0x2000 * (n))) - #define EIP197_PE_EIP96_CONTEXT_STAT(n) (0x100c + (0x2000 * (n))) -+#define EIP197_PE_EIP96_TOKEN_CTRL2(n) (0x102c + (0x2000 * (n))) - #define EIP197_PE_EIP96_FUNCTION2_EN(n) (0x1030 + (0x2000 * (n))) - #define EIP197_PE_EIP96_OPTIONS(n) (0x13f8 + (0x2000 * (n))) - #define EIP197_PE_EIP96_VERSION(n) (0x13fc + (0x2000 * (n))) - #define EIP197_PE_OUT_DBUF_THRES(n) (0x1c00 + (0x2000 * (n))) - #define EIP197_PE_OUT_TBUF_THRES(n) (0x1d00 + (0x2000 * (n))) -+#define EIP197_PE_OPTIONS(n) (0x1ff8 + (0x2000 * (n))) -+#define EIP197_PE_VERSION(n) (0x1ffc + (0x2000 * (n))) - #define EIP197_MST_CTRL 0xfff4 -+#define EIP197_OPTIONS 0xfff8 - #define EIP197_VERSION 0xfffc - - /* EIP197-specific registers, no indirection */ -@@ -178,6 +197,7 @@ - #define EIP197_TRC_ECCADMINSTAT 0xf0838 - #define EIP197_TRC_ECCDATASTAT 0xf083c - #define EIP197_TRC_ECCDATA 0xf0840 -+#define EIP197_STRC_CONFIG 0xf43f0 - #define EIP197_FLUE_CACHEBASE_LO(n) (0xf6000 + (32 * (n))) - #define EIP197_FLUE_CACHEBASE_HI(n) (0xf6004 + (32 * (n))) - #define EIP197_FLUE_CONFIG(n) (0xf6010 + (32 * (n))) -@@ -188,6 +208,7 @@ - - /* EIP197_HIA_xDR_DESC_SIZE */ - #define EIP197_xDR_DESC_MODE_64BIT BIT(31) -+#define EIP197_CDR_DESC_MODE_ADCP BIT(30) - - /* EIP197_HIA_xDR_DMA_CFG */ - #define EIP197_HIA_xDR_WR_RES_BUF BIT(22) -@@ -213,7 +234,6 @@ - /* EIP197_HIA_xDR_PROC_COUNT */ - #define EIP197_xDR_PROC_xD_PKT_OFFSET 24 - #define EIP197_xDR_PROC_xD_PKT_MASK GENMASK(6, 0) --#define EIP197_xDR_PROC_xD_COUNT(n) ((n) << 2) - #define EIP197_xDR_PROC_xD_PKT(n) ((n) << 24) - #define EIP197_xDR_PROC_CLR_COUNT BIT(31) - -@@ -228,6 +248,8 @@ - #define EIP197_HIA_RA_PE_CTRL_EN BIT(30) - - /* EIP197_HIA_OPTIONS */ -+#define EIP197_N_RINGS_OFFSET 0 -+#define EIP197_N_RINGS_MASK GENMASK(3, 0) - #define EIP197_N_PES_OFFSET 4 - #define EIP197_N_PES_MASK GENMASK(4, 0) - #define EIP97_N_PES_MASK GENMASK(2, 0) -@@ -237,13 +259,13 @@ - #define EIP197_CFSIZE_OFFSET 9 - #define EIP197_CFSIZE_ADJUST 4 - #define EIP97_CFSIZE_OFFSET 8 --#define EIP197_CFSIZE_MASK GENMASK(3, 0) --#define EIP97_CFSIZE_MASK GENMASK(4, 0) -+#define EIP197_CFSIZE_MASK GENMASK(2, 0) -+#define EIP97_CFSIZE_MASK GENMASK(3, 0) - #define EIP197_RFSIZE_OFFSET 12 - #define EIP197_RFSIZE_ADJUST 4 - #define EIP97_RFSIZE_OFFSET 12 --#define EIP197_RFSIZE_MASK GENMASK(3, 0) --#define EIP97_RFSIZE_MASK GENMASK(4, 0) -+#define EIP197_RFSIZE_MASK GENMASK(2, 0) -+#define EIP97_RFSIZE_MASK GENMASK(3, 0) - - /* EIP197_HIA_AIC_R_ENABLE_CTRL */ - #define EIP197_CDR_IRQ(n) BIT((n) * 2) -@@ -257,9 +279,9 @@ - #define EIP197_HIA_DxE_CFG_MIN_CTRL_SIZE(n) ((n) << 16) - #define EIP197_HIA_DxE_CFG_CTRL_CACHE_CTRL(n) (((n) & 0x7) << 20) - #define EIP197_HIA_DxE_CFG_MAX_CTRL_SIZE(n) ((n) << 24) --#define EIP197_HIA_DFE_CFG_DIS_DEBUG (BIT(31) | BIT(29)) -+#define EIP197_HIA_DFE_CFG_DIS_DEBUG GENMASK(31, 29) - #define EIP197_HIA_DSE_CFG_EN_SINGLE_WR BIT(29) --#define EIP197_HIA_DSE_CFG_DIS_DEBUG BIT(31) -+#define EIP197_HIA_DSE_CFG_DIS_DEBUG GENMASK(31, 30) - - /* EIP197_HIA_DFE/DSE_THR_CTRL */ - #define EIP197_DxE_THR_CTRL_EN BIT(30) -@@ -327,13 +349,21 @@ - #define EIP197_ADDRESS_MODE BIT(8) - #define EIP197_CONTROL_MODE BIT(9) - -+/* EIP197_PE_EIP96_TOKEN_CTRL2 */ -+#define EIP197_PE_EIP96_TOKEN_CTRL2_CTX_DONE BIT(3) -+ -+/* EIP197_STRC_CONFIG */ -+#define EIP197_STRC_CONFIG_INIT BIT(31) -+#define EIP197_STRC_CONFIG_LARGE_REC(s) (s<<8) -+#define EIP197_STRC_CONFIG_SMALL_REC(s) (s<<0) -+ - /* EIP197_FLUE_CONFIG */ - #define EIP197_FLUE_CONFIG_MAGIC 0xc7000004 - - /* Context Control */ - struct safexcel_context_record { -- u32 control0; -- u32 control1; -+ __le32 control0; -+ __le32 control1; - - __le32 data[40]; - } __packed; -@@ -358,10 +388,14 @@ struct safexcel_context_record { - #define CONTEXT_CONTROL_CRYPTO_ALG_AES128 (0x5 << 17) - #define CONTEXT_CONTROL_CRYPTO_ALG_AES192 (0x6 << 17) - #define CONTEXT_CONTROL_CRYPTO_ALG_AES256 (0x7 << 17) -+#define CONTEXT_CONTROL_CRYPTO_ALG_CHACHA20 (0x8 << 17) -+#define CONTEXT_CONTROL_CRYPTO_ALG_SM4 (0xd << 17) -+#define CONTEXT_CONTROL_DIGEST_INITIAL (0x0 << 21) - #define CONTEXT_CONTROL_DIGEST_PRECOMPUTED (0x1 << 21) - #define CONTEXT_CONTROL_DIGEST_XCM (0x2 << 21) - #define CONTEXT_CONTROL_DIGEST_HMAC (0x3 << 21) - #define CONTEXT_CONTROL_CRYPTO_ALG_MD5 (0x0 << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_CRC32 (0x0 << 23) - #define CONTEXT_CONTROL_CRYPTO_ALG_SHA1 (0x2 << 23) - #define CONTEXT_CONTROL_CRYPTO_ALG_SHA224 (0x4 << 23) - #define CONTEXT_CONTROL_CRYPTO_ALG_SHA256 (0x3 << 23) -@@ -371,17 +405,25 @@ struct safexcel_context_record { - #define CONTEXT_CONTROL_CRYPTO_ALG_XCBC128 (0x1 << 23) - #define CONTEXT_CONTROL_CRYPTO_ALG_XCBC192 (0x2 << 23) - #define CONTEXT_CONTROL_CRYPTO_ALG_XCBC256 (0x3 << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_SM3 (0x7 << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_SHA3_256 (0xb << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_SHA3_224 (0xc << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_SHA3_512 (0xd << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_SHA3_384 (0xe << 23) -+#define CONTEXT_CONTROL_CRYPTO_ALG_POLY1305 (0xf << 23) - #define CONTEXT_CONTROL_INV_FR (0x5 << 24) - #define CONTEXT_CONTROL_INV_TR (0x6 << 24) - - /* control1 */ - #define CONTEXT_CONTROL_CRYPTO_MODE_ECB (0 << 0) - #define CONTEXT_CONTROL_CRYPTO_MODE_CBC (1 << 0) -+#define CONTEXT_CONTROL_CHACHA20_MODE_256_32 (2 << 0) - #define CONTEXT_CONTROL_CRYPTO_MODE_OFB (4 << 0) - #define CONTEXT_CONTROL_CRYPTO_MODE_CFB (5 << 0) - #define CONTEXT_CONTROL_CRYPTO_MODE_CTR_LOAD (6 << 0) - #define CONTEXT_CONTROL_CRYPTO_MODE_XTS (7 << 0) - #define CONTEXT_CONTROL_CRYPTO_MODE_XCM ((6 << 0) | BIT(17)) -+#define CONTEXT_CONTROL_CHACHA20_MODE_CALC_OTK (12 << 0) - #define CONTEXT_CONTROL_IV0 BIT(5) - #define CONTEXT_CONTROL_IV1 BIT(6) - #define CONTEXT_CONTROL_IV2 BIT(7) -@@ -394,6 +436,13 @@ struct safexcel_context_record { - #define EIP197_XCM_MODE_GCM 1 - #define EIP197_XCM_MODE_CCM 2 - -+#define EIP197_AEAD_TYPE_IPSEC_ESP 2 -+#define EIP197_AEAD_TYPE_IPSEC_ESP_GMAC 3 -+#define EIP197_AEAD_IPSEC_IV_SIZE 8 -+#define EIP197_AEAD_IPSEC_NONCE_SIZE 4 -+#define EIP197_AEAD_IPSEC_COUNTER_SIZE 4 -+#define EIP197_AEAD_IPSEC_CCM_NONCE_SIZE 3 -+ - /* The hash counter given to the engine in the context has a granularity of - * 64 bits. - */ -@@ -423,6 +472,8 @@ struct safexcel_context_record { - #define EIP197_TRC_PARAMS2_RC_SZ_SMALL(n) ((n) << 18) - - /* Cache helpers */ -+#define EIP197_MIN_DSIZE 1024 -+#define EIP197_MIN_ASIZE 8 - #define EIP197_CS_TRC_REC_WC 64 - #define EIP197_CS_RC_SIZE (4 * sizeof(u32)) - #define EIP197_CS_RC_NEXT(x) (x) -@@ -447,7 +498,7 @@ struct result_data_desc { - u16 application_id; - u16 rsvd1; - -- u32 rsvd2; -+ u32 rsvd2[5]; - } __packed; - - -@@ -465,16 +516,15 @@ struct safexcel_result_desc { - - u32 data_lo; - u32 data_hi; -- -- struct result_data_desc result_data; - } __packed; - - /* - * The EIP(1)97 only needs to fetch the descriptor part of - * the result descriptor, not the result token part! - */ --#define EIP197_RD64_FETCH_SIZE ((sizeof(struct safexcel_result_desc) -\ -- sizeof(struct result_data_desc)) /\ -+#define EIP197_RD64_FETCH_SIZE (sizeof(struct safexcel_result_desc) /\ -+ sizeof(u32)) -+#define EIP197_RD64_RESULT_SIZE (sizeof(struct result_data_desc) /\ - sizeof(u32)) - - struct safexcel_token { -@@ -505,6 +555,8 @@ static inline void eip197_noop_token(str - { - token->opcode = EIP197_TOKEN_OPCODE_NOOP; - token->packet_length = BIT(2); -+ token->stat = 0; -+ token->instructions = 0; - } - - /* Instructions */ -@@ -526,14 +578,13 @@ struct safexcel_control_data_desc { - u16 application_id; - u16 rsvd; - -- u8 refresh:2; -- u32 context_lo:30; -+ u32 context_lo; - u32 context_hi; - - u32 control0; - u32 control1; - -- u32 token[EIP197_MAX_TOKENS]; -+ u32 token[EIP197_EMB_TOKENS]; - } __packed; - - #define EIP197_OPTION_MAGIC_VALUE BIT(0) -@@ -543,7 +594,10 @@ struct safexcel_control_data_desc { - #define EIP197_OPTION_2_TOKEN_IV_CMD GENMASK(11, 10) - #define EIP197_OPTION_4_TOKEN_IV_CMD GENMASK(11, 9) - -+#define EIP197_TYPE_BCLA 0x0 - #define EIP197_TYPE_EXTENDED 0x3 -+#define EIP197_CONTEXT_SMALL 0x2 -+#define EIP197_CONTEXT_SIZE_MASK 0x3 - - /* Basic Command Descriptor format */ - struct safexcel_command_desc { -@@ -551,16 +605,22 @@ struct safexcel_command_desc { - u8 rsvd0:5; - u8 last_seg:1; - u8 first_seg:1; -- u16 additional_cdata_size:8; -+ u8 additional_cdata_size:8; - - u32 rsvd1; - - u32 data_lo; - u32 data_hi; - -+ u32 atok_lo; -+ u32 atok_hi; -+ - struct safexcel_control_data_desc control_data; - } __packed; - -+#define EIP197_CD64_FETCH_SIZE (sizeof(struct safexcel_command_desc) /\ -+ sizeof(u32)) -+ - /* - * Internal structures & functions - */ -@@ -578,15 +638,20 @@ enum eip197_fw { - - struct safexcel_desc_ring { - void *base; -+ void *shbase; - void *base_end; -+ void *shbase_end; - dma_addr_t base_dma; -+ dma_addr_t shbase_dma; - - /* write and read pointers */ - void *write; -+ void *shwrite; - void *read; - - /* descriptor element offset */ -- unsigned offset; -+ unsigned int offset; -+ unsigned int shoffset; - }; - - enum safexcel_alg_type { -@@ -601,9 +666,11 @@ struct safexcel_config { - - u32 cd_size; - u32 cd_offset; -+ u32 cdsh_offset; - - u32 rd_size; - u32 rd_offset; -+ u32 res_offset; - }; - - struct safexcel_work_data { -@@ -654,6 +721,12 @@ enum safexcel_eip_version { - /* Priority we use for advertising our algorithms */ - #define SAFEXCEL_CRA_PRIORITY 300 - -+/* SM3 digest result for zero length message */ -+#define EIP197_SM3_ZEROM_HASH "\x1A\xB2\x1D\x83\x55\xCF\xA1\x7F" \ -+ "\x8E\x61\x19\x48\x31\xE8\x1A\x8F" \ -+ "\x22\xBE\xC8\xC7\x28\xFE\xFB\x74" \ -+ "\x7E\xD0\x35\xEB\x50\x82\xAA\x2B" -+ - /* EIP algorithm presence flags */ - enum safexcel_eip_algorithms { - SAFEXCEL_ALG_BC0 = BIT(5), -@@ -697,16 +770,23 @@ struct safexcel_register_offsets { - enum safexcel_flags { - EIP197_TRC_CACHE = BIT(0), - SAFEXCEL_HW_EIP197 = BIT(1), -+ EIP197_PE_ARB = BIT(2), -+ EIP197_ICE = BIT(3), -+ EIP197_SIMPLE_TRC = BIT(4), - }; - - struct safexcel_hwconfig { - enum safexcel_eip_algorithms algo_flags; - int hwver; - int hiaver; -+ int ppver; - int pever; - int hwdataw; - int hwcfsize; - int hwrfsize; -+ int hwnumpes; -+ int hwnumrings; -+ int hwnumraic; - }; - - struct safexcel_crypto_priv { -@@ -778,7 +858,7 @@ struct safexcel_inv_result { - - void safexcel_dequeue(struct safexcel_crypto_priv *priv, int ring); - int safexcel_rdesc_check_errors(struct safexcel_crypto_priv *priv, -- struct safexcel_result_desc *rdesc); -+ void *rdp); - void safexcel_complete(struct safexcel_crypto_priv *priv, int ring); - int safexcel_invalidate_cache(struct crypto_async_request *async, - struct safexcel_crypto_priv *priv, -@@ -797,7 +877,8 @@ struct safexcel_command_desc *safexcel_a - bool first, bool last, - dma_addr_t data, u32 len, - u32 full_data_len, -- dma_addr_t context); -+ dma_addr_t context, -+ struct safexcel_token **atoken); - struct safexcel_result_desc *safexcel_add_rdesc(struct safexcel_crypto_priv *priv, - int ring_id, - bool first, bool last, -@@ -853,5 +934,43 @@ extern struct safexcel_alg_template safe - extern struct safexcel_alg_template safexcel_alg_xts_aes; - extern struct safexcel_alg_template safexcel_alg_gcm; - extern struct safexcel_alg_template safexcel_alg_ccm; -+extern struct safexcel_alg_template safexcel_alg_crc32; -+extern struct safexcel_alg_template safexcel_alg_cbcmac; -+extern struct safexcel_alg_template safexcel_alg_xcbcmac; -+extern struct safexcel_alg_template safexcel_alg_cmac; -+extern struct safexcel_alg_template safexcel_alg_chacha20; -+extern struct safexcel_alg_template safexcel_alg_chachapoly; -+extern struct safexcel_alg_template safexcel_alg_chachapoly_esp; -+extern struct safexcel_alg_template safexcel_alg_sm3; -+extern struct safexcel_alg_template safexcel_alg_hmac_sm3; -+extern struct safexcel_alg_template safexcel_alg_ecb_sm4; -+extern struct safexcel_alg_template safexcel_alg_cbc_sm4; -+extern struct safexcel_alg_template safexcel_alg_ofb_sm4; -+extern struct safexcel_alg_template safexcel_alg_cfb_sm4; -+extern struct safexcel_alg_template safexcel_alg_ctr_sm4; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha1_cbc_sm4; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sm3_cbc_sm4; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha1_ctr_sm4; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sm3_ctr_sm4; -+extern struct safexcel_alg_template safexcel_alg_sha3_224; -+extern struct safexcel_alg_template safexcel_alg_sha3_256; -+extern struct safexcel_alg_template safexcel_alg_sha3_384; -+extern struct safexcel_alg_template safexcel_alg_sha3_512; -+extern struct safexcel_alg_template safexcel_alg_hmac_sha3_224; -+extern struct safexcel_alg_template safexcel_alg_hmac_sha3_256; -+extern struct safexcel_alg_template safexcel_alg_hmac_sha3_384; -+extern struct safexcel_alg_template safexcel_alg_hmac_sha3_512; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha1_cbc_des; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha256_cbc_des3_ede; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha224_cbc_des3_ede; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha512_cbc_des3_ede; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha384_cbc_des3_ede; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha256_cbc_des; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha224_cbc_des; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha512_cbc_des; -+extern struct safexcel_alg_template safexcel_alg_authenc_hmac_sha384_cbc_des; -+extern struct safexcel_alg_template safexcel_alg_rfc4106_gcm; -+extern struct safexcel_alg_template safexcel_alg_rfc4543_gcm; -+extern struct safexcel_alg_template safexcel_alg_rfc4309_ccm; - - #endif ---- a/drivers/crypto/inside-secure/safexcel_hash.c -+++ b/drivers/crypto/inside-secure/safexcel_hash.c -@@ -5,9 +5,13 @@ - * Antoine Tenart - */ - -+#include - #include - #include - #include -+#include -+#include -+#include - #include - #include - #include -@@ -19,9 +23,19 @@ struct safexcel_ahash_ctx { - struct safexcel_crypto_priv *priv; - - u32 alg; -- -- u32 ipad[SHA512_DIGEST_SIZE / sizeof(u32)]; -- u32 opad[SHA512_DIGEST_SIZE / sizeof(u32)]; -+ u8 key_sz; -+ bool cbcmac; -+ bool do_fallback; -+ bool fb_init_done; -+ bool fb_do_setkey; -+ -+ __le32 ipad[SHA3_512_BLOCK_SIZE / sizeof(__le32)]; -+ __le32 opad[SHA3_512_BLOCK_SIZE / sizeof(__le32)]; -+ -+ struct crypto_cipher *kaes; -+ struct crypto_ahash *fback; -+ struct crypto_shash *shpre; -+ struct shash_desc *shdesc; - }; - - struct safexcel_ahash_req { -@@ -31,6 +45,8 @@ struct safexcel_ahash_req { - bool needs_inv; - bool hmac_zlen; - bool len_is_le; -+ bool not_first; -+ bool xcbcmac; - - int nents; - dma_addr_t result_dma; -@@ -39,7 +55,9 @@ struct safexcel_ahash_req { - - u8 state_sz; /* expected state size, only set once */ - u8 block_sz; /* block size, only set once */ -- u32 state[SHA512_DIGEST_SIZE / sizeof(u32)] __aligned(sizeof(u32)); -+ u8 digest_sz; /* output digest size, only set once */ -+ __le32 state[SHA3_512_BLOCK_SIZE / -+ sizeof(__le32)] __aligned(sizeof(__le32)); - - u64 len; - u64 processed; -@@ -57,22 +75,36 @@ static inline u64 safexcel_queued_len(st - } - - static void safexcel_hash_token(struct safexcel_command_desc *cdesc, -- u32 input_length, u32 result_length) -+ u32 input_length, u32 result_length, -+ bool cbcmac) - { - struct safexcel_token *token = - (struct safexcel_token *)cdesc->control_data.token; - - token[0].opcode = EIP197_TOKEN_OPCODE_DIRECTION; - token[0].packet_length = input_length; -- token[0].stat = EIP197_TOKEN_STAT_LAST_HASH; - token[0].instructions = EIP197_TOKEN_INS_TYPE_HASH; - -- token[1].opcode = EIP197_TOKEN_OPCODE_INSERT; -- token[1].packet_length = result_length; -- token[1].stat = EIP197_TOKEN_STAT_LAST_HASH | -+ input_length &= 15; -+ if (unlikely(cbcmac && input_length)) { -+ token[0].stat = 0; -+ token[1].opcode = EIP197_TOKEN_OPCODE_INSERT; -+ token[1].packet_length = 16 - input_length; -+ token[1].stat = EIP197_TOKEN_STAT_LAST_HASH; -+ token[1].instructions = EIP197_TOKEN_INS_TYPE_HASH; -+ } else { -+ token[0].stat = EIP197_TOKEN_STAT_LAST_HASH; -+ eip197_noop_token(&token[1]); -+ } -+ -+ token[2].opcode = EIP197_TOKEN_OPCODE_INSERT; -+ token[2].stat = EIP197_TOKEN_STAT_LAST_HASH | - EIP197_TOKEN_STAT_LAST_PACKET; -- token[1].instructions = EIP197_TOKEN_INS_TYPE_OUTPUT | -+ token[2].packet_length = result_length; -+ token[2].instructions = EIP197_TOKEN_INS_TYPE_OUTPUT | - EIP197_TOKEN_INS_INSERT_HASH_DIGEST; -+ -+ eip197_noop_token(&token[3]); - } - - static void safexcel_context_control(struct safexcel_ahash_ctx *ctx, -@@ -82,29 +114,49 @@ static void safexcel_context_control(str - struct safexcel_crypto_priv *priv = ctx->priv; - u64 count = 0; - -- cdesc->control_data.control0 |= ctx->alg; -+ cdesc->control_data.control0 = ctx->alg; -+ cdesc->control_data.control1 = 0; - - /* - * Copy the input digest if needed, and setup the context - * fields. Do this now as we need it to setup the first command - * descriptor. - */ -- if (!req->processed) { -- /* First - and possibly only - block of basic hash only */ -- if (req->finish) { -+ if (unlikely(req->digest == CONTEXT_CONTROL_DIGEST_XCM)) { -+ if (req->xcbcmac) -+ memcpy(ctx->base.ctxr->data, ctx->ipad, ctx->key_sz); -+ else -+ memcpy(ctx->base.ctxr->data, req->state, req->state_sz); -+ -+ if (!req->finish && req->xcbcmac) -+ cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_DIGEST_XCM | -+ CONTEXT_CONTROL_TYPE_HASH_OUT | -+ CONTEXT_CONTROL_NO_FINISH_HASH | -+ CONTEXT_CONTROL_SIZE(req->state_sz / -+ sizeof(u32)); -+ else - cdesc->control_data.control0 |= -+ CONTEXT_CONTROL_DIGEST_XCM | -+ CONTEXT_CONTROL_TYPE_HASH_OUT | -+ CONTEXT_CONTROL_SIZE(req->state_sz / -+ sizeof(u32)); -+ return; -+ } else if (!req->processed) { -+ /* First - and possibly only - block of basic hash only */ -+ if (req->finish) -+ cdesc->control_data.control0 |= req->digest | - CONTEXT_CONTROL_TYPE_HASH_OUT | - CONTEXT_CONTROL_RESTART_HASH | - /* ensure its not 0! */ - CONTEXT_CONTROL_SIZE(1); -- } else { -- cdesc->control_data.control0 |= -+ else -+ cdesc->control_data.control0 |= req->digest | - CONTEXT_CONTROL_TYPE_HASH_OUT | - CONTEXT_CONTROL_RESTART_HASH | - CONTEXT_CONTROL_NO_FINISH_HASH | - /* ensure its not 0! */ - CONTEXT_CONTROL_SIZE(1); -- } - return; - } - -@@ -204,7 +256,7 @@ static int safexcel_handle_req_result(st - } - - if (sreq->result_dma) { -- dma_unmap_single(priv->dev, sreq->result_dma, sreq->state_sz, -+ dma_unmap_single(priv->dev, sreq->result_dma, sreq->digest_sz, - DMA_FROM_DEVICE); - sreq->result_dma = 0; - } -@@ -223,14 +275,15 @@ static int safexcel_handle_req_result(st - memcpy(sreq->cache, sreq->state, - crypto_ahash_digestsize(ahash)); - -- memcpy(sreq->state, ctx->opad, sreq->state_sz); -+ memcpy(sreq->state, ctx->opad, sreq->digest_sz); - - sreq->len = sreq->block_sz + - crypto_ahash_digestsize(ahash); - sreq->processed = sreq->block_sz; - sreq->hmac = 0; - -- ctx->base.needs_inv = true; -+ if (priv->flags & EIP197_TRC_CACHE) -+ ctx->base.needs_inv = true; - areq->nbytes = 0; - safexcel_ahash_enqueue(areq); - -@@ -238,8 +291,14 @@ static int safexcel_handle_req_result(st - return 1; - } - -- memcpy(areq->result, sreq->state, -- crypto_ahash_digestsize(ahash)); -+ if (unlikely(sreq->digest == CONTEXT_CONTROL_DIGEST_XCM && -+ ctx->alg == CONTEXT_CONTROL_CRYPTO_ALG_CRC32)) { -+ /* Undo final XOR with 0xffffffff ...*/ -+ *(__le32 *)areq->result = ~sreq->state[0]; -+ } else { -+ memcpy(areq->result, sreq->state, -+ crypto_ahash_digestsize(ahash)); -+ } - } - - cache_len = safexcel_queued_len(sreq); -@@ -261,10 +320,11 @@ static int safexcel_ahash_send_req(struc - struct safexcel_command_desc *cdesc, *first_cdesc = NULL; - struct safexcel_result_desc *rdesc; - struct scatterlist *sg; -- int i, extra = 0, n_cdesc = 0, ret = 0; -- u64 queued, len, cache_len; -+ struct safexcel_token *dmmy; -+ int i, extra = 0, n_cdesc = 0, ret = 0, cache_len, skip = 0; -+ u64 queued, len; - -- queued = len = safexcel_queued_len(req); -+ queued = safexcel_queued_len(req); - if (queued <= HASH_CACHE_SIZE) - cache_len = queued; - else -@@ -287,15 +347,52 @@ static int safexcel_ahash_send_req(struc - areq->nbytes - extra); - - queued -= extra; -- len -= extra; - - if (!queued) { - *commands = 0; - *results = 0; - return 0; - } -+ -+ extra = 0; -+ } -+ -+ if (unlikely(req->xcbcmac && req->processed > AES_BLOCK_SIZE)) { -+ if (unlikely(cache_len < AES_BLOCK_SIZE)) { -+ /* -+ * Cache contains less than 1 full block, complete. -+ */ -+ extra = AES_BLOCK_SIZE - cache_len; -+ if (queued > cache_len) { -+ /* More data follows: borrow bytes */ -+ u64 tmp = queued - cache_len; -+ -+ skip = min_t(u64, tmp, extra); -+ sg_pcopy_to_buffer(areq->src, -+ sg_nents(areq->src), -+ req->cache + cache_len, -+ skip, 0); -+ } -+ extra -= skip; -+ memset(req->cache + cache_len + skip, 0, extra); -+ if (!ctx->cbcmac && extra) { -+ // 10- padding for XCBCMAC & CMAC -+ req->cache[cache_len + skip] = 0x80; -+ // HW will use K2 iso K3 - compensate! -+ for (i = 0; i < AES_BLOCK_SIZE / sizeof(u32); i++) -+ ((__be32 *)req->cache)[i] ^= -+ cpu_to_be32(le32_to_cpu( -+ ctx->ipad[i] ^ ctx->ipad[i + 4])); -+ } -+ cache_len = AES_BLOCK_SIZE; -+ queued = queued + extra; -+ } -+ -+ /* XCBC continue: XOR previous result into 1st word */ -+ crypto_xor(req->cache, (const u8 *)req->state, AES_BLOCK_SIZE); - } - -+ len = queued; - /* Add a command descriptor for the cached data, if any */ - if (cache_len) { - req->cache_dma = dma_map_single(priv->dev, req->cache, -@@ -306,8 +403,9 @@ static int safexcel_ahash_send_req(struc - req->cache_sz = cache_len; - first_cdesc = safexcel_add_cdesc(priv, ring, 1, - (cache_len == len), -- req->cache_dma, cache_len, len, -- ctx->base.ctxr_dma); -+ req->cache_dma, cache_len, -+ len, ctx->base.ctxr_dma, -+ &dmmy); - if (IS_ERR(first_cdesc)) { - ret = PTR_ERR(first_cdesc); - goto unmap_cache; -@@ -319,10 +417,6 @@ static int safexcel_ahash_send_req(struc - goto send_command; - } - -- /* Skip descriptor generation for zero-length requests */ -- if (!areq->nbytes) -- goto send_command; -- - /* Now handle the current ahash request buffer(s) */ - req->nents = dma_map_sg(priv->dev, areq->src, - sg_nents_for_len(areq->src, -@@ -336,26 +430,34 @@ static int safexcel_ahash_send_req(struc - for_each_sg(areq->src, sg, req->nents, i) { - int sglen = sg_dma_len(sg); - -+ if (unlikely(sglen <= skip)) { -+ skip -= sglen; -+ continue; -+ } -+ - /* Do not overflow the request */ -- if (queued < sglen) -+ if ((queued + skip) <= sglen) - sglen = queued; -+ else -+ sglen -= skip; - - cdesc = safexcel_add_cdesc(priv, ring, !n_cdesc, - !(queued - sglen), -- sg_dma_address(sg), -- sglen, len, ctx->base.ctxr_dma); -+ sg_dma_address(sg) + skip, sglen, -+ len, ctx->base.ctxr_dma, &dmmy); - if (IS_ERR(cdesc)) { - ret = PTR_ERR(cdesc); - goto unmap_sg; - } -- n_cdesc++; - -- if (n_cdesc == 1) -+ if (!n_cdesc) - first_cdesc = cdesc; -+ n_cdesc++; - - queued -= sglen; - if (!queued) - break; -+ skip = 0; - } - - send_command: -@@ -363,9 +465,9 @@ send_command: - safexcel_context_control(ctx, req, first_cdesc); - - /* Add the token */ -- safexcel_hash_token(first_cdesc, len, req->state_sz); -+ safexcel_hash_token(first_cdesc, len, req->digest_sz, ctx->cbcmac); - -- req->result_dma = dma_map_single(priv->dev, req->state, req->state_sz, -+ req->result_dma = dma_map_single(priv->dev, req->state, req->digest_sz, - DMA_FROM_DEVICE); - if (dma_mapping_error(priv->dev, req->result_dma)) { - ret = -EINVAL; -@@ -374,7 +476,7 @@ send_command: - - /* Add a result descriptor */ - rdesc = safexcel_add_rdesc(priv, ring, 1, 1, req->result_dma, -- req->state_sz); -+ req->digest_sz); - if (IS_ERR(rdesc)) { - ret = PTR_ERR(rdesc); - goto unmap_result; -@@ -382,17 +484,20 @@ send_command: - - safexcel_rdr_req_set(priv, ring, rdesc, &areq->base); - -- req->processed += len; -+ req->processed += len - extra; - - *commands = n_cdesc; - *results = 1; - return 0; - - unmap_result: -- dma_unmap_single(priv->dev, req->result_dma, req->state_sz, -+ dma_unmap_single(priv->dev, req->result_dma, req->digest_sz, - DMA_FROM_DEVICE); - unmap_sg: -- dma_unmap_sg(priv->dev, areq->src, req->nents, DMA_TO_DEVICE); -+ if (req->nents) { -+ dma_unmap_sg(priv->dev, areq->src, req->nents, DMA_TO_DEVICE); -+ req->nents = 0; -+ } - cdesc_rollback: - for (i = 0; i < n_cdesc; i++) - safexcel_ring_rollback_wptr(priv, &priv->ring[ring].cdr); -@@ -590,16 +695,12 @@ static int safexcel_ahash_enqueue(struct - - if (ctx->base.ctxr) { - if (priv->flags & EIP197_TRC_CACHE && !ctx->base.needs_inv && -- req->processed && -- (/* invalidate for basic hash continuation finish */ -- (req->finish && -- (req->digest == CONTEXT_CONTROL_DIGEST_PRECOMPUTED)) || -+ /* invalidate for *any* non-XCBC continuation */ -+ ((req->not_first && !req->xcbcmac) || - /* invalidate if (i)digest changed */ - memcmp(ctx->base.ctxr->data, req->state, req->state_sz) || -- /* invalidate for HMAC continuation finish */ -- (req->finish && (req->processed != req->block_sz)) || - /* invalidate for HMAC finish with odigest changed */ -- (req->finish && -+ (req->finish && req->hmac && - memcmp(ctx->base.ctxr->data + (req->state_sz>>2), - ctx->opad, req->state_sz)))) - /* -@@ -622,6 +723,7 @@ static int safexcel_ahash_enqueue(struct - if (!ctx->base.ctxr) - return -ENOMEM; - } -+ req->not_first = true; - - ring = ctx->base.ring; - -@@ -691,8 +793,34 @@ static int safexcel_ahash_final(struct a - else if (ctx->alg == CONTEXT_CONTROL_CRYPTO_ALG_SHA512) - memcpy(areq->result, sha512_zero_message_hash, - SHA512_DIGEST_SIZE); -+ else if (ctx->alg == CONTEXT_CONTROL_CRYPTO_ALG_SM3) { -+ memcpy(areq->result, -+ EIP197_SM3_ZEROM_HASH, SM3_DIGEST_SIZE); -+ } - - return 0; -+ } else if (unlikely(req->digest == CONTEXT_CONTROL_DIGEST_XCM && -+ ctx->alg == CONTEXT_CONTROL_CRYPTO_ALG_MD5 && -+ req->len == sizeof(u32) && !areq->nbytes)) { -+ /* Zero length CRC32 */ -+ memcpy(areq->result, ctx->ipad, sizeof(u32)); -+ return 0; -+ } else if (unlikely(ctx->cbcmac && req->len == AES_BLOCK_SIZE && -+ !areq->nbytes)) { -+ /* Zero length CBC MAC */ -+ memset(areq->result, 0, AES_BLOCK_SIZE); -+ return 0; -+ } else if (unlikely(req->xcbcmac && req->len == AES_BLOCK_SIZE && -+ !areq->nbytes)) { -+ /* Zero length (X)CBC/CMAC */ -+ int i; -+ -+ for (i = 0; i < AES_BLOCK_SIZE / sizeof(u32); i++) -+ ((__be32 *)areq->result)[i] = -+ cpu_to_be32(le32_to_cpu(ctx->ipad[i + 4]));//K3 -+ areq->result[0] ^= 0x80; // 10- padding -+ crypto_cipher_encrypt_one(ctx->kaes, areq->result, areq->result); -+ return 0; - } else if (unlikely(req->hmac && - (req->len == req->block_sz) && - !areq->nbytes)) { -@@ -792,6 +920,7 @@ static int safexcel_ahash_cra_init(struc - ctx->priv = tmpl->priv; - ctx->base.send = safexcel_ahash_send; - ctx->base.handle_result = safexcel_handle_result; -+ ctx->fb_do_setkey = false; - - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct safexcel_ahash_req)); -@@ -808,6 +937,7 @@ static int safexcel_sha1_init(struct aha - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA1; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA1_DIGEST_SIZE; -+ req->digest_sz = SHA1_DIGEST_SIZE; - req->block_sz = SHA1_BLOCK_SIZE; - - return 0; -@@ -889,6 +1019,7 @@ static int safexcel_hmac_sha1_init(struc - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA1; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA1_DIGEST_SIZE; -+ req->digest_sz = SHA1_DIGEST_SIZE; - req->block_sz = SHA1_BLOCK_SIZE; - req->hmac = true; - -@@ -1125,6 +1256,7 @@ static int safexcel_sha256_init(struct a - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA256; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA256_DIGEST_SIZE; -+ req->digest_sz = SHA256_DIGEST_SIZE; - req->block_sz = SHA256_BLOCK_SIZE; - - return 0; -@@ -1180,6 +1312,7 @@ static int safexcel_sha224_init(struct a - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA224; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA256_DIGEST_SIZE; -+ req->digest_sz = SHA256_DIGEST_SIZE; - req->block_sz = SHA256_BLOCK_SIZE; - - return 0; -@@ -1248,6 +1381,7 @@ static int safexcel_hmac_sha224_init(str - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA224; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA256_DIGEST_SIZE; -+ req->digest_sz = SHA256_DIGEST_SIZE; - req->block_sz = SHA256_BLOCK_SIZE; - req->hmac = true; - -@@ -1318,6 +1452,7 @@ static int safexcel_hmac_sha256_init(str - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA256; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA256_DIGEST_SIZE; -+ req->digest_sz = SHA256_DIGEST_SIZE; - req->block_sz = SHA256_BLOCK_SIZE; - req->hmac = true; - -@@ -1375,6 +1510,7 @@ static int safexcel_sha512_init(struct a - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA512; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA512_DIGEST_SIZE; -+ req->digest_sz = SHA512_DIGEST_SIZE; - req->block_sz = SHA512_BLOCK_SIZE; - - return 0; -@@ -1430,6 +1566,7 @@ static int safexcel_sha384_init(struct a - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA384; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA512_DIGEST_SIZE; -+ req->digest_sz = SHA512_DIGEST_SIZE; - req->block_sz = SHA512_BLOCK_SIZE; - - return 0; -@@ -1498,6 +1635,7 @@ static int safexcel_hmac_sha512_init(str - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA512; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA512_DIGEST_SIZE; -+ req->digest_sz = SHA512_DIGEST_SIZE; - req->block_sz = SHA512_BLOCK_SIZE; - req->hmac = true; - -@@ -1568,6 +1706,7 @@ static int safexcel_hmac_sha384_init(str - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA384; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = SHA512_DIGEST_SIZE; -+ req->digest_sz = SHA512_DIGEST_SIZE; - req->block_sz = SHA512_BLOCK_SIZE; - req->hmac = true; - -@@ -1625,6 +1764,7 @@ static int safexcel_md5_init(struct ahas - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_MD5; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = MD5_DIGEST_SIZE; -+ req->digest_sz = MD5_DIGEST_SIZE; - req->block_sz = MD5_HMAC_BLOCK_SIZE; - - return 0; -@@ -1686,6 +1826,7 @@ static int safexcel_hmac_md5_init(struct - ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_MD5; - req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; - req->state_sz = MD5_DIGEST_SIZE; -+ req->digest_sz = MD5_DIGEST_SIZE; - req->block_sz = MD5_HMAC_BLOCK_SIZE; - req->len_is_le = true; /* MD5 is little endian! ... */ - req->hmac = true; -@@ -1738,5 +1879,1235 @@ struct safexcel_alg_template safexcel_al - .cra_module = THIS_MODULE, - }, - }, -+ }, -+}; -+ -+static int safexcel_crc32_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret = safexcel_ahash_cra_init(tfm); -+ -+ /* Default 'key' is all zeroes */ -+ memset(ctx->ipad, 0, sizeof(u32)); -+ return ret; -+} -+ -+static int safexcel_crc32_init(struct ahash_request *areq) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(areq)); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Start from loaded key */ -+ req->state[0] = (__force __le32)le32_to_cpu(~ctx->ipad[0]); -+ /* Set processed to non-zero to enable invalidation detection */ -+ req->len = sizeof(u32); -+ req->processed = sizeof(u32); -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_CRC32; -+ req->digest = CONTEXT_CONTROL_DIGEST_XCM; -+ req->state_sz = sizeof(u32); -+ req->digest_sz = sizeof(u32); -+ req->block_sz = sizeof(u32); -+ -+ return 0; -+} -+ -+static int safexcel_crc32_setkey(struct crypto_ahash *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(crypto_ahash_tfm(tfm)); -+ -+ if (keylen != sizeof(u32)) -+ return -EINVAL; -+ -+ memcpy(ctx->ipad, key, sizeof(u32)); -+ return 0; -+} -+ -+static int safexcel_crc32_digest(struct ahash_request *areq) -+{ -+ return safexcel_crc32_init(areq) ?: safexcel_ahash_finup(areq); -+} -+ -+struct safexcel_alg_template safexcel_alg_crc32 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = 0, -+ .alg.ahash = { -+ .init = safexcel_crc32_init, -+ .update = safexcel_ahash_update, -+ .final = safexcel_ahash_final, -+ .finup = safexcel_ahash_finup, -+ .digest = safexcel_crc32_digest, -+ .setkey = safexcel_crc32_setkey, -+ .export = safexcel_ahash_export, -+ .import = safexcel_ahash_import, -+ .halg = { -+ .digestsize = sizeof(u32), -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "crc32", -+ .cra_driver_name = "safexcel-crc32", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_OPTIONAL_KEY | -+ CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_crc32_cra_init, -+ .cra_exit = safexcel_ahash_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_cbcmac_init(struct ahash_request *areq) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(areq)); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Start from loaded keys */ -+ memcpy(req->state, ctx->ipad, ctx->key_sz); -+ /* Set processed to non-zero to enable invalidation detection */ -+ req->len = AES_BLOCK_SIZE; -+ req->processed = AES_BLOCK_SIZE; -+ -+ req->digest = CONTEXT_CONTROL_DIGEST_XCM; -+ req->state_sz = ctx->key_sz; -+ req->digest_sz = AES_BLOCK_SIZE; -+ req->block_sz = AES_BLOCK_SIZE; -+ req->xcbcmac = true; -+ -+ return 0; -+} -+ -+static int safexcel_cbcmac_setkey(struct crypto_ahash *tfm, const u8 *key, -+ unsigned int len) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(crypto_ahash_tfm(tfm)); -+ struct crypto_aes_ctx aes; -+ int ret, i; -+ -+ ret = aes_expandkey(&aes, key, len); -+ if (ret) -+ return ret; -+ -+ memset(ctx->ipad, 0, 2 * AES_BLOCK_SIZE); -+ for (i = 0; i < len / sizeof(u32); i++) -+ ctx->ipad[i + 8] = (__force __le32)cpu_to_be32(aes.key_enc[i]); -+ -+ if (len == AES_KEYSIZE_192) { -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC192; -+ ctx->key_sz = AES_MAX_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ } else if (len == AES_KEYSIZE_256) { -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC256; -+ ctx->key_sz = AES_MAX_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ } else { -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC128; -+ ctx->key_sz = AES_MIN_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ } -+ ctx->cbcmac = true; -+ -+ memzero_explicit(&aes, sizeof(aes)); -+ return 0; -+} -+ -+static int safexcel_cbcmac_digest(struct ahash_request *areq) -+{ -+ return safexcel_cbcmac_init(areq) ?: safexcel_ahash_finup(areq); -+} -+ -+struct safexcel_alg_template safexcel_alg_cbcmac = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = 0, -+ .alg.ahash = { -+ .init = safexcel_cbcmac_init, -+ .update = safexcel_ahash_update, -+ .final = safexcel_ahash_final, -+ .finup = safexcel_ahash_finup, -+ .digest = safexcel_cbcmac_digest, -+ .setkey = safexcel_cbcmac_setkey, -+ .export = safexcel_ahash_export, -+ .import = safexcel_ahash_import, -+ .halg = { -+ .digestsize = AES_BLOCK_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "cbcmac(aes)", -+ .cra_driver_name = "safexcel-cbcmac-aes", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = 1, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_ahash_cra_init, -+ .cra_exit = safexcel_ahash_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_xcbcmac_setkey(struct crypto_ahash *tfm, const u8 *key, -+ unsigned int len) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(crypto_ahash_tfm(tfm)); -+ struct crypto_aes_ctx aes; -+ u32 key_tmp[3 * AES_BLOCK_SIZE / sizeof(u32)]; -+ int ret, i; -+ -+ ret = aes_expandkey(&aes, key, len); -+ if (ret) -+ return ret; -+ -+ /* precompute the XCBC key material */ -+ crypto_cipher_clear_flags(ctx->kaes, CRYPTO_TFM_REQ_MASK); -+ crypto_cipher_set_flags(ctx->kaes, crypto_ahash_get_flags(tfm) & -+ CRYPTO_TFM_REQ_MASK); -+ ret = crypto_cipher_setkey(ctx->kaes, key, len); -+ if (ret) -+ return ret; -+ -+ crypto_cipher_encrypt_one(ctx->kaes, (u8 *)key_tmp + 2 * AES_BLOCK_SIZE, -+ "\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1\x1"); -+ crypto_cipher_encrypt_one(ctx->kaes, (u8 *)key_tmp, -+ "\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2\x2"); -+ crypto_cipher_encrypt_one(ctx->kaes, (u8 *)key_tmp + AES_BLOCK_SIZE, -+ "\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3"); -+ for (i = 0; i < 3 * AES_BLOCK_SIZE / sizeof(u32); i++) -+ ctx->ipad[i] = -+ cpu_to_le32((__force u32)cpu_to_be32(key_tmp[i])); -+ -+ crypto_cipher_clear_flags(ctx->kaes, CRYPTO_TFM_REQ_MASK); -+ crypto_cipher_set_flags(ctx->kaes, crypto_ahash_get_flags(tfm) & -+ CRYPTO_TFM_REQ_MASK); -+ ret = crypto_cipher_setkey(ctx->kaes, -+ (u8 *)key_tmp + 2 * AES_BLOCK_SIZE, -+ AES_MIN_KEY_SIZE); -+ if (ret) -+ return ret; -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC128; -+ ctx->key_sz = AES_MIN_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ ctx->cbcmac = false; -+ -+ memzero_explicit(&aes, sizeof(aes)); -+ return 0; -+} -+ -+static int safexcel_xcbcmac_cra_init(struct crypto_tfm *tfm) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_ahash_cra_init(tfm); -+ ctx->kaes = crypto_alloc_cipher("aes", 0, 0); -+ return PTR_ERR_OR_ZERO(ctx->kaes); -+} -+ -+static void safexcel_xcbcmac_cra_exit(struct crypto_tfm *tfm) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ crypto_free_cipher(ctx->kaes); -+ safexcel_ahash_cra_exit(tfm); -+} -+ -+struct safexcel_alg_template safexcel_alg_xcbcmac = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = 0, -+ .alg.ahash = { -+ .init = safexcel_cbcmac_init, -+ .update = safexcel_ahash_update, -+ .final = safexcel_ahash_final, -+ .finup = safexcel_ahash_finup, -+ .digest = safexcel_cbcmac_digest, -+ .setkey = safexcel_xcbcmac_setkey, -+ .export = safexcel_ahash_export, -+ .import = safexcel_ahash_import, -+ .halg = { -+ .digestsize = AES_BLOCK_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "xcbc(aes)", -+ .cra_driver_name = "safexcel-xcbc-aes", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = AES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_xcbcmac_cra_init, -+ .cra_exit = safexcel_xcbcmac_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_cmac_setkey(struct crypto_ahash *tfm, const u8 *key, -+ unsigned int len) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(crypto_ahash_tfm(tfm)); -+ struct crypto_aes_ctx aes; -+ __be64 consts[4]; -+ u64 _const[2]; -+ u8 msb_mask, gfmask; -+ int ret, i; -+ -+ ret = aes_expandkey(&aes, key, len); -+ if (ret) -+ return ret; -+ -+ for (i = 0; i < len / sizeof(u32); i++) -+ ctx->ipad[i + 8] = -+ cpu_to_le32((__force u32)cpu_to_be32(aes.key_enc[i])); -+ -+ /* precompute the CMAC key material */ -+ crypto_cipher_clear_flags(ctx->kaes, CRYPTO_TFM_REQ_MASK); -+ crypto_cipher_set_flags(ctx->kaes, crypto_ahash_get_flags(tfm) & -+ CRYPTO_TFM_REQ_MASK); -+ ret = crypto_cipher_setkey(ctx->kaes, key, len); -+ if (ret) -+ return ret; -+ -+ /* code below borrowed from crypto/cmac.c */ -+ /* encrypt the zero block */ -+ memset(consts, 0, AES_BLOCK_SIZE); -+ crypto_cipher_encrypt_one(ctx->kaes, (u8 *)consts, (u8 *)consts); -+ -+ gfmask = 0x87; -+ _const[0] = be64_to_cpu(consts[1]); -+ _const[1] = be64_to_cpu(consts[0]); -+ -+ /* gf(2^128) multiply zero-ciphertext with u and u^2 */ -+ for (i = 0; i < 4; i += 2) { -+ msb_mask = ((s64)_const[1] >> 63) & gfmask; -+ _const[1] = (_const[1] << 1) | (_const[0] >> 63); -+ _const[0] = (_const[0] << 1) ^ msb_mask; -+ -+ consts[i + 0] = cpu_to_be64(_const[1]); -+ consts[i + 1] = cpu_to_be64(_const[0]); -+ } -+ /* end of code borrowed from crypto/cmac.c */ -+ -+ for (i = 0; i < 2 * AES_BLOCK_SIZE / sizeof(u32); i++) -+ ctx->ipad[i] = (__force __le32)cpu_to_be32(((u32 *)consts)[i]); -+ -+ if (len == AES_KEYSIZE_192) { -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC192; -+ ctx->key_sz = AES_MAX_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ } else if (len == AES_KEYSIZE_256) { -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC256; -+ ctx->key_sz = AES_MAX_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ } else { -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_XCBC128; -+ ctx->key_sz = AES_MIN_KEY_SIZE + 2 * AES_BLOCK_SIZE; -+ } -+ ctx->cbcmac = false; -+ -+ memzero_explicit(&aes, sizeof(aes)); -+ return 0; -+} -+ -+struct safexcel_alg_template safexcel_alg_cmac = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = 0, -+ .alg.ahash = { -+ .init = safexcel_cbcmac_init, -+ .update = safexcel_ahash_update, -+ .final = safexcel_ahash_final, -+ .finup = safexcel_ahash_finup, -+ .digest = safexcel_cbcmac_digest, -+ .setkey = safexcel_cmac_setkey, -+ .export = safexcel_ahash_export, -+ .import = safexcel_ahash_import, -+ .halg = { -+ .digestsize = AES_BLOCK_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "cmac(aes)", -+ .cra_driver_name = "safexcel-cmac-aes", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = AES_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_xcbcmac_cra_init, -+ .cra_exit = safexcel_xcbcmac_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_sm3_init(struct ahash_request *areq) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(areq)); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SM3; -+ req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; -+ req->state_sz = SM3_DIGEST_SIZE; -+ req->digest_sz = SM3_DIGEST_SIZE; -+ req->block_sz = SM3_BLOCK_SIZE; -+ -+ return 0; -+} -+ -+static int safexcel_sm3_digest(struct ahash_request *areq) -+{ -+ int ret = safexcel_sm3_init(areq); -+ -+ if (ret) -+ return ret; -+ -+ return safexcel_ahash_finup(areq); -+} -+ -+struct safexcel_alg_template safexcel_alg_sm3 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SM3, -+ .alg.ahash = { -+ .init = safexcel_sm3_init, -+ .update = safexcel_ahash_update, -+ .final = safexcel_ahash_final, -+ .finup = safexcel_ahash_finup, -+ .digest = safexcel_sm3_digest, -+ .export = safexcel_ahash_export, -+ .import = safexcel_ahash_import, -+ .halg = { -+ .digestsize = SM3_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "sm3", -+ .cra_driver_name = "safexcel-sm3", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = SM3_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_ahash_cra_init, -+ .cra_exit = safexcel_ahash_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_hmac_sm3_setkey(struct crypto_ahash *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ return safexcel_hmac_alg_setkey(tfm, key, keylen, "safexcel-sm3", -+ SM3_DIGEST_SIZE); -+} -+ -+static int safexcel_hmac_sm3_init(struct ahash_request *areq) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(crypto_ahash_reqtfm(areq)); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Start from ipad precompute */ -+ memcpy(req->state, ctx->ipad, SM3_DIGEST_SIZE); -+ /* Already processed the key^ipad part now! */ -+ req->len = SM3_BLOCK_SIZE; -+ req->processed = SM3_BLOCK_SIZE; -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SM3; -+ req->digest = CONTEXT_CONTROL_DIGEST_PRECOMPUTED; -+ req->state_sz = SM3_DIGEST_SIZE; -+ req->digest_sz = SM3_DIGEST_SIZE; -+ req->block_sz = SM3_BLOCK_SIZE; -+ req->hmac = true; -+ -+ return 0; -+} -+ -+static int safexcel_hmac_sm3_digest(struct ahash_request *areq) -+{ -+ int ret = safexcel_hmac_sm3_init(areq); -+ -+ if (ret) -+ return ret; -+ -+ return safexcel_ahash_finup(areq); -+} -+ -+struct safexcel_alg_template safexcel_alg_hmac_sm3 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SM3, -+ .alg.ahash = { -+ .init = safexcel_hmac_sm3_init, -+ .update = safexcel_ahash_update, -+ .final = safexcel_ahash_final, -+ .finup = safexcel_ahash_finup, -+ .digest = safexcel_hmac_sm3_digest, -+ .setkey = safexcel_hmac_sm3_setkey, -+ .export = safexcel_ahash_export, -+ .import = safexcel_ahash_import, -+ .halg = { -+ .digestsize = SM3_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "hmac(sm3)", -+ .cra_driver_name = "safexcel-hmac-sm3", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY, -+ .cra_blocksize = SM3_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_ahash_cra_init, -+ .cra_exit = safexcel_ahash_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_sha3_224_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_224; -+ req->digest = CONTEXT_CONTROL_DIGEST_INITIAL; -+ req->state_sz = SHA3_224_DIGEST_SIZE; -+ req->digest_sz = SHA3_224_DIGEST_SIZE; -+ req->block_sz = SHA3_224_BLOCK_SIZE; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_sha3_fbcheck(struct ahash_request *req) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ int ret = 0; -+ -+ if (ctx->do_fallback) { -+ ahash_request_set_tfm(subreq, ctx->fback); -+ ahash_request_set_callback(subreq, req->base.flags, -+ req->base.complete, req->base.data); -+ ahash_request_set_crypt(subreq, req->src, req->result, -+ req->nbytes); -+ if (!ctx->fb_init_done) { -+ if (ctx->fb_do_setkey) { -+ /* Set fallback cipher HMAC key */ -+ u8 key[SHA3_224_BLOCK_SIZE]; -+ -+ memcpy(key, ctx->ipad, -+ crypto_ahash_blocksize(ctx->fback) / 2); -+ memcpy(key + -+ crypto_ahash_blocksize(ctx->fback) / 2, -+ ctx->opad, -+ crypto_ahash_blocksize(ctx->fback) / 2); -+ ret = crypto_ahash_setkey(ctx->fback, key, -+ crypto_ahash_blocksize(ctx->fback)); -+ memzero_explicit(key, -+ crypto_ahash_blocksize(ctx->fback)); -+ ctx->fb_do_setkey = false; -+ } -+ ret = ret ?: crypto_ahash_init(subreq); -+ ctx->fb_init_done = true; -+ } -+ } -+ return ret; -+} -+ -+static int safexcel_sha3_update(struct ahash_request *req) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ -+ ctx->do_fallback = true; -+ return safexcel_sha3_fbcheck(req) ?: crypto_ahash_update(subreq); -+} -+ -+static int safexcel_sha3_final(struct ahash_request *req) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ -+ ctx->do_fallback = true; -+ return safexcel_sha3_fbcheck(req) ?: crypto_ahash_final(subreq); -+} -+ -+static int safexcel_sha3_finup(struct ahash_request *req) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ -+ ctx->do_fallback |= !req->nbytes; -+ if (ctx->do_fallback) -+ /* Update or ex/import happened or len 0, cannot use the HW */ -+ return safexcel_sha3_fbcheck(req) ?: -+ crypto_ahash_finup(subreq); -+ else -+ return safexcel_ahash_finup(req); -+} -+ -+static int safexcel_sha3_digest_fallback(struct ahash_request *req) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ -+ ctx->do_fallback = true; -+ ctx->fb_init_done = false; -+ return safexcel_sha3_fbcheck(req) ?: crypto_ahash_finup(subreq); -+} -+ -+static int safexcel_sha3_224_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_sha3_224_init(req) ?: safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length hash, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+static int safexcel_sha3_export(struct ahash_request *req, void *out) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ -+ ctx->do_fallback = true; -+ return safexcel_sha3_fbcheck(req) ?: crypto_ahash_export(subreq, out); -+} -+ -+static int safexcel_sha3_import(struct ahash_request *req, const void *in) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct ahash_request *subreq = ahash_request_ctx(req); -+ -+ ctx->do_fallback = true; -+ return safexcel_sha3_fbcheck(req) ?: crypto_ahash_import(subreq, in); -+ // return safexcel_ahash_import(req, in); -+} -+ -+static int safexcel_sha3_cra_init(struct crypto_tfm *tfm) -+{ -+ struct crypto_ahash *ahash = __crypto_ahash_cast(tfm); -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ safexcel_ahash_cra_init(tfm); -+ -+ /* Allocate fallback implementation */ -+ ctx->fback = crypto_alloc_ahash(crypto_tfm_alg_name(tfm), 0, -+ CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_NEED_FALLBACK); -+ if (IS_ERR(ctx->fback)) -+ return PTR_ERR(ctx->fback); -+ -+ /* Update statesize from fallback algorithm! */ -+ crypto_hash_alg_common(ahash)->statesize = -+ crypto_ahash_statesize(ctx->fback); -+ crypto_ahash_set_reqsize(ahash, max(sizeof(struct safexcel_ahash_req), -+ sizeof(struct ahash_request) + -+ crypto_ahash_reqsize(ctx->fback))); -+ return 0; -+} -+ -+static void safexcel_sha3_cra_exit(struct crypto_tfm *tfm) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ crypto_free_ahash(ctx->fback); -+ safexcel_ahash_cra_exit(tfm); -+} -+ -+struct safexcel_alg_template safexcel_alg_sha3_224 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_sha3_224_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_sha3_224_digest, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_224_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "sha3-224", -+ .cra_driver_name = "safexcel-sha3-224", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_224_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_sha3_cra_init, -+ .cra_exit = safexcel_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_sha3_256_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_256; -+ req->digest = CONTEXT_CONTROL_DIGEST_INITIAL; -+ req->state_sz = SHA3_256_DIGEST_SIZE; -+ req->digest_sz = SHA3_256_DIGEST_SIZE; -+ req->block_sz = SHA3_256_BLOCK_SIZE; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_sha3_256_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_sha3_256_init(req) ?: safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length hash, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+struct safexcel_alg_template safexcel_alg_sha3_256 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_sha3_256_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_sha3_256_digest, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_256_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "sha3-256", -+ .cra_driver_name = "safexcel-sha3-256", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_256_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_sha3_cra_init, -+ .cra_exit = safexcel_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_sha3_384_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_384; -+ req->digest = CONTEXT_CONTROL_DIGEST_INITIAL; -+ req->state_sz = SHA3_384_DIGEST_SIZE; -+ req->digest_sz = SHA3_384_DIGEST_SIZE; -+ req->block_sz = SHA3_384_BLOCK_SIZE; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_sha3_384_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_sha3_384_init(req) ?: safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length hash, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+struct safexcel_alg_template safexcel_alg_sha3_384 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_sha3_384_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_sha3_384_digest, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_384_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "sha3-384", -+ .cra_driver_name = "safexcel-sha3-384", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_384_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_sha3_cra_init, -+ .cra_exit = safexcel_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_sha3_512_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_512; -+ req->digest = CONTEXT_CONTROL_DIGEST_INITIAL; -+ req->state_sz = SHA3_512_DIGEST_SIZE; -+ req->digest_sz = SHA3_512_DIGEST_SIZE; -+ req->block_sz = SHA3_512_BLOCK_SIZE; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_sha3_512_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_sha3_512_init(req) ?: safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length hash, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+struct safexcel_alg_template safexcel_alg_sha3_512 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_sha3_512_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_sha3_512_digest, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_512_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "sha3-512", -+ .cra_driver_name = "safexcel-sha3-512", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_512_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_sha3_cra_init, -+ .cra_exit = safexcel_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_hmac_sha3_cra_init(struct crypto_tfm *tfm, const char *alg) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ int ret; -+ -+ ret = safexcel_sha3_cra_init(tfm); -+ if (ret) -+ return ret; -+ -+ /* Allocate precalc basic digest implementation */ -+ ctx->shpre = crypto_alloc_shash(alg, 0, CRYPTO_ALG_NEED_FALLBACK); -+ if (IS_ERR(ctx->shpre)) -+ return PTR_ERR(ctx->shpre); -+ -+ ctx->shdesc = kmalloc(sizeof(*ctx->shdesc) + -+ crypto_shash_descsize(ctx->shpre), GFP_KERNEL); -+ if (!ctx->shdesc) { -+ crypto_free_shash(ctx->shpre); -+ return -ENOMEM; -+ } -+ ctx->shdesc->tfm = ctx->shpre; -+ return 0; -+} -+ -+static void safexcel_hmac_sha3_cra_exit(struct crypto_tfm *tfm) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_tfm_ctx(tfm); -+ -+ crypto_free_ahash(ctx->fback); -+ crypto_free_shash(ctx->shpre); -+ kfree(ctx->shdesc); -+ safexcel_ahash_cra_exit(tfm); -+} -+ -+static int safexcel_hmac_sha3_setkey(struct crypto_ahash *tfm, const u8 *key, -+ unsigned int keylen) -+{ -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ int ret = 0; -+ -+ if (keylen > crypto_ahash_blocksize(tfm)) { -+ /* -+ * If the key is larger than the blocksize, then hash it -+ * first using our fallback cipher -+ */ -+ ret = crypto_shash_digest(ctx->shdesc, key, keylen, -+ (u8 *)ctx->ipad); -+ keylen = crypto_shash_digestsize(ctx->shpre); -+ -+ /* -+ * If the digest is larger than half the blocksize, we need to -+ * move the rest to opad due to the way our HMAC infra works. -+ */ -+ if (keylen > crypto_ahash_blocksize(tfm) / 2) -+ /* Buffers overlap, need to use memmove iso memcpy! */ -+ memmove(ctx->opad, -+ (u8 *)ctx->ipad + -+ crypto_ahash_blocksize(tfm) / 2, -+ keylen - crypto_ahash_blocksize(tfm) / 2); -+ } else { -+ /* -+ * Copy the key to our ipad & opad buffers -+ * Note that ipad and opad each contain one half of the key, -+ * to match the existing HMAC driver infrastructure. -+ */ -+ if (keylen <= crypto_ahash_blocksize(tfm) / 2) { -+ memcpy(ctx->ipad, key, keylen); -+ } else { -+ memcpy(ctx->ipad, key, -+ crypto_ahash_blocksize(tfm) / 2); -+ memcpy(ctx->opad, -+ key + crypto_ahash_blocksize(tfm) / 2, -+ keylen - crypto_ahash_blocksize(tfm) / 2); -+ } -+ } -+ -+ /* Pad key with zeroes */ -+ if (keylen <= crypto_ahash_blocksize(tfm) / 2) { -+ memset((u8 *)ctx->ipad + keylen, 0, -+ crypto_ahash_blocksize(tfm) / 2 - keylen); -+ memset(ctx->opad, 0, crypto_ahash_blocksize(tfm) / 2); -+ } else { -+ memset((u8 *)ctx->opad + keylen - -+ crypto_ahash_blocksize(tfm) / 2, 0, -+ crypto_ahash_blocksize(tfm) - keylen); -+ } -+ -+ /* If doing fallback, still need to set the new key! */ -+ ctx->fb_do_setkey = true; -+ return ret; -+} -+ -+static int safexcel_hmac_sha3_224_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Copy (half of) the key */ -+ memcpy(req->state, ctx->ipad, SHA3_224_BLOCK_SIZE / 2); -+ /* Start of HMAC should have len == processed == blocksize */ -+ req->len = SHA3_224_BLOCK_SIZE; -+ req->processed = SHA3_224_BLOCK_SIZE; -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_224; -+ req->digest = CONTEXT_CONTROL_DIGEST_HMAC; -+ req->state_sz = SHA3_224_BLOCK_SIZE / 2; -+ req->digest_sz = SHA3_224_DIGEST_SIZE; -+ req->block_sz = SHA3_224_BLOCK_SIZE; -+ req->hmac = true; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_hmac_sha3_224_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_hmac_sha3_224_init(req) ?: -+ safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length HMAC, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+static int safexcel_hmac_sha3_224_cra_init(struct crypto_tfm *tfm) -+{ -+ return safexcel_hmac_sha3_cra_init(tfm, "sha3-224"); -+} -+ -+struct safexcel_alg_template safexcel_alg_hmac_sha3_224 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_hmac_sha3_224_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_hmac_sha3_224_digest, -+ .setkey = safexcel_hmac_sha3_setkey, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_224_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "hmac(sha3-224)", -+ .cra_driver_name = "safexcel-hmac-sha3-224", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_224_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_hmac_sha3_224_cra_init, -+ .cra_exit = safexcel_hmac_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_hmac_sha3_256_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Copy (half of) the key */ -+ memcpy(req->state, ctx->ipad, SHA3_256_BLOCK_SIZE / 2); -+ /* Start of HMAC should have len == processed == blocksize */ -+ req->len = SHA3_256_BLOCK_SIZE; -+ req->processed = SHA3_256_BLOCK_SIZE; -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_256; -+ req->digest = CONTEXT_CONTROL_DIGEST_HMAC; -+ req->state_sz = SHA3_256_BLOCK_SIZE / 2; -+ req->digest_sz = SHA3_256_DIGEST_SIZE; -+ req->block_sz = SHA3_256_BLOCK_SIZE; -+ req->hmac = true; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_hmac_sha3_256_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_hmac_sha3_256_init(req) ?: -+ safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length HMAC, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+static int safexcel_hmac_sha3_256_cra_init(struct crypto_tfm *tfm) -+{ -+ return safexcel_hmac_sha3_cra_init(tfm, "sha3-256"); -+} -+ -+struct safexcel_alg_template safexcel_alg_hmac_sha3_256 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_hmac_sha3_256_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_hmac_sha3_256_digest, -+ .setkey = safexcel_hmac_sha3_setkey, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_256_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "hmac(sha3-256)", -+ .cra_driver_name = "safexcel-hmac-sha3-256", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_256_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_hmac_sha3_256_cra_init, -+ .cra_exit = safexcel_hmac_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_hmac_sha3_384_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Copy (half of) the key */ -+ memcpy(req->state, ctx->ipad, SHA3_384_BLOCK_SIZE / 2); -+ /* Start of HMAC should have len == processed == blocksize */ -+ req->len = SHA3_384_BLOCK_SIZE; -+ req->processed = SHA3_384_BLOCK_SIZE; -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_384; -+ req->digest = CONTEXT_CONTROL_DIGEST_HMAC; -+ req->state_sz = SHA3_384_BLOCK_SIZE / 2; -+ req->digest_sz = SHA3_384_DIGEST_SIZE; -+ req->block_sz = SHA3_384_BLOCK_SIZE; -+ req->hmac = true; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_hmac_sha3_384_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_hmac_sha3_384_init(req) ?: -+ safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length HMAC, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+static int safexcel_hmac_sha3_384_cra_init(struct crypto_tfm *tfm) -+{ -+ return safexcel_hmac_sha3_cra_init(tfm, "sha3-384"); -+} -+ -+struct safexcel_alg_template safexcel_alg_hmac_sha3_384 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_hmac_sha3_384_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_hmac_sha3_384_digest, -+ .setkey = safexcel_hmac_sha3_setkey, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_384_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "hmac(sha3-384)", -+ .cra_driver_name = "safexcel-hmac-sha3-384", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_384_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_hmac_sha3_384_cra_init, -+ .cra_exit = safexcel_hmac_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, -+ }, -+}; -+ -+static int safexcel_hmac_sha3_512_init(struct ahash_request *areq) -+{ -+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq); -+ struct safexcel_ahash_ctx *ctx = crypto_ahash_ctx(tfm); -+ struct safexcel_ahash_req *req = ahash_request_ctx(areq); -+ -+ memset(req, 0, sizeof(*req)); -+ -+ /* Copy (half of) the key */ -+ memcpy(req->state, ctx->ipad, SHA3_512_BLOCK_SIZE / 2); -+ /* Start of HMAC should have len == processed == blocksize */ -+ req->len = SHA3_512_BLOCK_SIZE; -+ req->processed = SHA3_512_BLOCK_SIZE; -+ ctx->alg = CONTEXT_CONTROL_CRYPTO_ALG_SHA3_512; -+ req->digest = CONTEXT_CONTROL_DIGEST_HMAC; -+ req->state_sz = SHA3_512_BLOCK_SIZE / 2; -+ req->digest_sz = SHA3_512_DIGEST_SIZE; -+ req->block_sz = SHA3_512_BLOCK_SIZE; -+ req->hmac = true; -+ ctx->do_fallback = false; -+ ctx->fb_init_done = false; -+ return 0; -+} -+ -+static int safexcel_hmac_sha3_512_digest(struct ahash_request *req) -+{ -+ if (req->nbytes) -+ return safexcel_hmac_sha3_512_init(req) ?: -+ safexcel_ahash_finup(req); -+ -+ /* HW cannot do zero length HMAC, use fallback instead */ -+ return safexcel_sha3_digest_fallback(req); -+} -+ -+static int safexcel_hmac_sha3_512_cra_init(struct crypto_tfm *tfm) -+{ -+ return safexcel_hmac_sha3_cra_init(tfm, "sha3-512"); -+} -+struct safexcel_alg_template safexcel_alg_hmac_sha3_512 = { -+ .type = SAFEXCEL_ALG_TYPE_AHASH, -+ .algo_mask = SAFEXCEL_ALG_SHA3, -+ .alg.ahash = { -+ .init = safexcel_hmac_sha3_512_init, -+ .update = safexcel_sha3_update, -+ .final = safexcel_sha3_final, -+ .finup = safexcel_sha3_finup, -+ .digest = safexcel_hmac_sha3_512_digest, -+ .setkey = safexcel_hmac_sha3_setkey, -+ .export = safexcel_sha3_export, -+ .import = safexcel_sha3_import, -+ .halg = { -+ .digestsize = SHA3_512_DIGEST_SIZE, -+ .statesize = sizeof(struct safexcel_ahash_export_state), -+ .base = { -+ .cra_name = "hmac(sha3-512)", -+ .cra_driver_name = "safexcel-hmac-sha3-512", -+ .cra_priority = SAFEXCEL_CRA_PRIORITY, -+ .cra_flags = CRYPTO_ALG_ASYNC | -+ CRYPTO_ALG_KERN_DRIVER_ONLY | -+ CRYPTO_ALG_NEED_FALLBACK, -+ .cra_blocksize = SHA3_512_BLOCK_SIZE, -+ .cra_ctxsize = sizeof(struct safexcel_ahash_ctx), -+ .cra_init = safexcel_hmac_sha3_512_cra_init, -+ .cra_exit = safexcel_hmac_sha3_cra_exit, -+ .cra_module = THIS_MODULE, -+ }, -+ }, - }, - }; ---- a/drivers/crypto/inside-secure/safexcel_ring.c -+++ b/drivers/crypto/inside-secure/safexcel_ring.c -@@ -14,7 +14,12 @@ int safexcel_init_ring_descriptors(struc - struct safexcel_desc_ring *cdr, - struct safexcel_desc_ring *rdr) - { -- cdr->offset = sizeof(u32) * priv->config.cd_offset; -+ int i; -+ struct safexcel_command_desc *cdesc; -+ dma_addr_t atok; -+ -+ /* Actual command descriptor ring */ -+ cdr->offset = priv->config.cd_offset; - cdr->base = dmam_alloc_coherent(priv->dev, - cdr->offset * EIP197_DEFAULT_RING_SIZE, - &cdr->base_dma, GFP_KERNEL); -@@ -24,7 +29,34 @@ int safexcel_init_ring_descriptors(struc - cdr->base_end = cdr->base + cdr->offset * (EIP197_DEFAULT_RING_SIZE - 1); - cdr->read = cdr->base; - -- rdr->offset = sizeof(u32) * priv->config.rd_offset; -+ /* Command descriptor shadow ring for storing additional token data */ -+ cdr->shoffset = priv->config.cdsh_offset; -+ cdr->shbase = dmam_alloc_coherent(priv->dev, -+ cdr->shoffset * -+ EIP197_DEFAULT_RING_SIZE, -+ &cdr->shbase_dma, GFP_KERNEL); -+ if (!cdr->shbase) -+ return -ENOMEM; -+ cdr->shwrite = cdr->shbase; -+ cdr->shbase_end = cdr->shbase + cdr->shoffset * -+ (EIP197_DEFAULT_RING_SIZE - 1); -+ -+ /* -+ * Populate command descriptors with physical pointers to shadow descs. -+ * Note that we only need to do this once if we don't overwrite them. -+ */ -+ cdesc = cdr->base; -+ atok = cdr->shbase_dma; -+ for (i = 0; i < EIP197_DEFAULT_RING_SIZE; i++) { -+ cdesc->atok_lo = lower_32_bits(atok); -+ cdesc->atok_hi = upper_32_bits(atok); -+ cdesc = (void *)cdesc + cdr->offset; -+ atok += cdr->shoffset; -+ } -+ -+ rdr->offset = priv->config.rd_offset; -+ /* Use shoffset for result token offset here */ -+ rdr->shoffset = priv->config.res_offset; - rdr->base = dmam_alloc_coherent(priv->dev, - rdr->offset * EIP197_DEFAULT_RING_SIZE, - &rdr->base_dma, GFP_KERNEL); -@@ -42,11 +74,40 @@ inline int safexcel_select_ring(struct s - return (atomic_inc_return(&priv->ring_used) % priv->config.rings); - } - --static void *safexcel_ring_next_wptr(struct safexcel_crypto_priv *priv, -- struct safexcel_desc_ring *ring) -+static void *safexcel_ring_next_cwptr(struct safexcel_crypto_priv *priv, -+ struct safexcel_desc_ring *ring, -+ bool first, -+ struct safexcel_token **atoken) - { - void *ptr = ring->write; - -+ if (first) -+ *atoken = ring->shwrite; -+ -+ if ((ring->write == ring->read - ring->offset) || -+ (ring->read == ring->base && ring->write == ring->base_end)) -+ return ERR_PTR(-ENOMEM); -+ -+ if (ring->write == ring->base_end) { -+ ring->write = ring->base; -+ ring->shwrite = ring->shbase; -+ } else { -+ ring->write += ring->offset; -+ ring->shwrite += ring->shoffset; -+ } -+ -+ return ptr; -+} -+ -+static void *safexcel_ring_next_rwptr(struct safexcel_crypto_priv *priv, -+ struct safexcel_desc_ring *ring, -+ struct result_data_desc **rtoken) -+{ -+ void *ptr = ring->write; -+ -+ /* Result token at relative offset shoffset */ -+ *rtoken = ring->write + ring->shoffset; -+ - if ((ring->write == ring->read - ring->offset) || - (ring->read == ring->base && ring->write == ring->base_end)) - return ERR_PTR(-ENOMEM); -@@ -106,10 +167,13 @@ void safexcel_ring_rollback_wptr(struct - if (ring->write == ring->read) - return; - -- if (ring->write == ring->base) -+ if (ring->write == ring->base) { - ring->write = ring->base_end; -- else -+ ring->shwrite = ring->shbase_end; -+ } else { - ring->write -= ring->offset; -+ ring->shwrite -= ring->shoffset; -+ } - } - - struct safexcel_command_desc *safexcel_add_cdesc(struct safexcel_crypto_priv *priv, -@@ -117,26 +181,26 @@ struct safexcel_command_desc *safexcel_a - bool first, bool last, - dma_addr_t data, u32 data_len, - u32 full_data_len, -- dma_addr_t context) { -+ dma_addr_t context, -+ struct safexcel_token **atoken) -+{ - struct safexcel_command_desc *cdesc; -- int i; - -- cdesc = safexcel_ring_next_wptr(priv, &priv->ring[ring_id].cdr); -+ cdesc = safexcel_ring_next_cwptr(priv, &priv->ring[ring_id].cdr, -+ first, atoken); - if (IS_ERR(cdesc)) - return cdesc; - -- memset(cdesc, 0, sizeof(struct safexcel_command_desc)); -- -- cdesc->first_seg = first; -- cdesc->last_seg = last; - cdesc->particle_size = data_len; -+ cdesc->rsvd0 = 0; -+ cdesc->last_seg = last; -+ cdesc->first_seg = first; -+ cdesc->additional_cdata_size = 0; -+ cdesc->rsvd1 = 0; - cdesc->data_lo = lower_32_bits(data); - cdesc->data_hi = upper_32_bits(data); - -- if (first && context) { -- struct safexcel_token *token = -- (struct safexcel_token *)cdesc->control_data.token; -- -+ if (first) { - /* - * Note that the length here MUST be >0 or else the EIP(1)97 - * may hang. Newer EIP197 firmware actually incorporates this -@@ -146,20 +210,12 @@ struct safexcel_command_desc *safexcel_a - cdesc->control_data.packet_length = full_data_len ?: 1; - cdesc->control_data.options = EIP197_OPTION_MAGIC_VALUE | - EIP197_OPTION_64BIT_CTX | -- EIP197_OPTION_CTX_CTRL_IN_CMD; -- cdesc->control_data.context_lo = -- (lower_32_bits(context) & GENMASK(31, 2)) >> 2; -+ EIP197_OPTION_CTX_CTRL_IN_CMD | -+ EIP197_OPTION_RC_AUTO; -+ cdesc->control_data.type = EIP197_TYPE_BCLA; -+ cdesc->control_data.context_lo = lower_32_bits(context) | -+ EIP197_CONTEXT_SMALL; - cdesc->control_data.context_hi = upper_32_bits(context); -- -- if (priv->version == EIP197B_MRVL || -- priv->version == EIP197D_MRVL) -- cdesc->control_data.options |= EIP197_OPTION_RC_AUTO; -- -- /* TODO: large xform HMAC with SHA-384/512 uses refresh = 3 */ -- cdesc->control_data.refresh = 2; -- -- for (i = 0; i < EIP197_MAX_TOKENS; i++) -- eip197_noop_token(&token[i]); - } - - return cdesc; -@@ -171,18 +227,27 @@ struct safexcel_result_desc *safexcel_ad - dma_addr_t data, u32 len) - { - struct safexcel_result_desc *rdesc; -+ struct result_data_desc *rtoken; - -- rdesc = safexcel_ring_next_wptr(priv, &priv->ring[ring_id].rdr); -+ rdesc = safexcel_ring_next_rwptr(priv, &priv->ring[ring_id].rdr, -+ &rtoken); - if (IS_ERR(rdesc)) - return rdesc; - -- memset(rdesc, 0, sizeof(struct safexcel_result_desc)); -- -- rdesc->first_seg = first; -- rdesc->last_seg = last; - rdesc->particle_size = len; -+ rdesc->rsvd0 = 0; -+ rdesc->descriptor_overflow = 0; -+ rdesc->buffer_overflow = 0; -+ rdesc->last_seg = last; -+ rdesc->first_seg = first; -+ rdesc->result_size = EIP197_RD64_RESULT_SIZE; -+ rdesc->rsvd1 = 0; - rdesc->data_lo = lower_32_bits(data); - rdesc->data_hi = upper_32_bits(data); - -+ /* Clear length & error code in result token */ -+ rtoken->packet_length = 0; -+ rtoken->error_code = 0; -+ - return rdesc; - } diff --git a/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch b/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch deleted file mode 100644 index 3eda4f291a..0000000000 --- a/target/linux/mediatek/patches-5.4/0501-crypto-add-eip97-inside-secure-support.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/crypto/inside-secure/safexcel.c -+++ b/drivers/crypto/inside-secure/safexcel.c -@@ -595,6 +595,14 @@ static int safexcel_hw_init(struct safex - val |= EIP197_MST_CTRL_TX_MAX_CMD(5); - writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL); - } -+ /* -+ * Set maximum number of TX commands to 2^4 = 16 for EIP97 HW2.1/HW2.3 -+ */ -+ else { -+ val = 0; -+ val |= EIP97_MST_CTRL_TX_MAX_CMD(4); -+ writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL); -+ } - - /* Configure wr/rd cache values */ - writel(EIP197_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) | ---- a/drivers/crypto/inside-secure/safexcel.h -+++ b/drivers/crypto/inside-secure/safexcel.h -@@ -306,6 +306,7 @@ - #define EIP197_MST_CTRL_RD_CACHE(n) (((n) & 0xf) << 0) - #define EIP197_MST_CTRL_WD_CACHE(n) (((n) & 0xf) << 4) - #define EIP197_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 20) -+#define EIP97_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 4) - #define EIP197_MST_CTRL_BYTE_SWAP BIT(24) - #define EIP197_MST_CTRL_NO_BYTE_SWAP BIT(25) - #define EIP197_MST_CTRL_BYTE_SWAP_BITS GENMASK(25, 24) diff --git a/target/linux/mediatek/patches-5.4/0502-dts-mt7623-eip97-inside-secure-support.patch b/target/linux/mediatek/patches-5.4/0502-dts-mt7623-eip97-inside-secure-support.patch deleted file mode 100644 index 06077fb984..0000000000 --- a/target/linux/mediatek/patches-5.4/0502-dts-mt7623-eip97-inside-secure-support.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/arm/boot/dts/mt7623.dtsi -+++ b/arch/arm/boot/dts/mt7623.dtsi -@@ -1047,17 +1047,14 @@ - }; - - crypto: crypto@1b240000 { -- compatible = "mediatek,eip97-crypto"; -+ compatible = "inside-secure,safexcel-eip97"; - reg = <0 0x1b240000 0 0x20000>; - interrupts = , - , - , -- , -- ; -+ ; -+ interrupt-names = "ring0", "ring1", "ring2", "ring3"; - clocks = <ðsys CLK_ETHSYS_CRYPTO>; -- clock-names = "cryp"; -- power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; -- status = "disabled"; - }; - - bdpsys: syscon@1c000000 { diff --git a/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch b/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch deleted file mode 100644 index 5bc0fd0b7d..0000000000 --- a/target/linux/mediatek/patches-5.4/0503-crypto-fix-eip97-cache-incoherent.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/crypto/inside-secure/safexcel.h -+++ b/drivers/crypto/inside-secure/safexcel.h -@@ -722,6 +722,9 @@ enum safexcel_eip_version { - /* Priority we use for advertising our algorithms */ - #define SAFEXCEL_CRA_PRIORITY 300 - -+/* System cache line size */ -+#define SYSTEM_CACHELINE_SIZE 64 -+ - /* SM3 digest result for zero length message */ - #define EIP197_SM3_ZEROM_HASH "\x1A\xB2\x1D\x83\x55\xCF\xA1\x7F" \ - "\x8E\x61\x19\x48\x31\xE8\x1A\x8F" \ ---- a/drivers/crypto/inside-secure/safexcel_hash.c -+++ b/drivers/crypto/inside-secure/safexcel_hash.c -@@ -57,9 +57,9 @@ struct safexcel_ahash_req { - u8 block_sz; /* block size, only set once */ - u8 digest_sz; /* output digest size, only set once */ - __le32 state[SHA3_512_BLOCK_SIZE / -- sizeof(__le32)] __aligned(sizeof(__le32)); -+ sizeof(__le32)] __aligned(SYSTEM_CACHELINE_SIZE); - -- u64 len; -+ u64 len __aligned(SYSTEM_CACHELINE_SIZE); - u64 processed; - - u8 cache[HASH_CACHE_SIZE] __aligned(sizeof(u32)); diff --git a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch deleted file mode 100644 index bd854613b7..0000000000 --- a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch +++ /dev/null @@ -1,246 +0,0 @@ -From: Russell King -Date: Wed, 26 Feb 2020 10:23:41 +0000 -Subject: [PATCH] net: phylink: propagate resolved link config via - mac_link_up() - -Propagate the resolved link parameters via the mac_link_up() call for -MACs that do not automatically track their PCS state. We propagate the -link parameters via function arguments so that inappropriate members -of struct phylink_link_state can't be accessed, and creating a new -structure just for this adds needless complexity to the API. - -Tested-by: Andre Przywara -Tested-by: Alexandre Belloni -Tested-by: Vladimir Oltean -Signed-off-by: Russell King -Signed-off-by: David S. Miller ---- - ---- a/Documentation/networking/sfp-phylink.rst -+++ b/Documentation/networking/sfp-phylink.rst -@@ -74,10 +74,13 @@ phylib to the sfp/phylink support. Plea - this documentation. - - 1. Optionally split the network driver's phylib update function into -- three parts dealing with link-down, link-up and reconfiguring the -- MAC settings. This can be done as a separate preparation commit. -+ two parts dealing with link-down and link-up. This can be done as -+ a separate preparation commit. - -- An example of this preparation can be found in git commit fc548b991fb0. -+ An older example of this preparation can be found in git commit -+ fc548b991fb0, although this was splitting into three parts; the -+ link-up part now includes configuring the MAC for the link settings. -+ Please see :c:func:`mac_link_up` for more information on this. - - 2. Replace:: - -@@ -207,6 +210,14 @@ this documentation. - using. This is particularly important for in-band negotiation - methods such as 1000base-X and SGMII. - -+ The :c:func:`mac_link_up` method is used to inform the MAC that the -+ link has come up. The call includes the negotiation mode and interface -+ for reference only. The finalised link parameters are also supplied -+ (speed, duplex and flow control/pause enablement settings) which -+ should be used to configure the MAC when the MAC and PCS are not -+ tightly integrated, or when the settings are not coming from in-band -+ negotiation. -+ - The :c:func:`mac_config` method is used to update the MAC with the - requested state, and must avoid unnecessarily taking the link down - when making changes to the MAC configuration. This means the ---- a/drivers/net/ethernet/marvell/mvneta.c -+++ b/drivers/net/ethernet/marvell/mvneta.c -@@ -3655,9 +3655,11 @@ static void mvneta_mac_link_down(struct - mvneta_set_eee(pp, false); - } - --static void mvneta_mac_link_up(struct phylink_config *config, unsigned int mode, -- phy_interface_t interface, -- struct phy_device *phy) -+static void mvneta_mac_link_up(struct phylink_config *config, -+ struct phy_device *phy, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct net_device *ndev = to_net_dev(config->dev); - struct mvneta_port *pp = netdev_priv(ndev); ---- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c -+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c -@@ -58,8 +58,11 @@ static struct { - */ - static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode, - const struct phylink_link_state *state); --static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode, -- phy_interface_t interface, struct phy_device *phy); -+static void mvpp2_mac_link_up(struct phylink_config *config, -+ struct phy_device *phy, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause); - - /* Queue modes */ - #define MVPP2_QDIST_SINGLE_MODE 0 -@@ -3468,8 +3471,9 @@ static void mvpp2_start_dev(struct mvpp2 - .interface = port->phy_interface, - }; - mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state); -- mvpp2_mac_link_up(&port->phylink_config, MLO_AN_INBAND, -- port->phy_interface, NULL); -+ mvpp2_mac_link_up(&port->phylink_config, NULL, -+ MLO_AN_INBAND, port->phy_interface, -+ SPEED_UNKNOWN, DUPLEX_UNKNOWN, false, false); - } - - netif_tx_start_all_queues(port->dev); -@@ -5137,8 +5141,11 @@ static void mvpp2_mac_config(struct phyl - mvpp2_port_enable(port); - } - --static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode, -- phy_interface_t interface, struct phy_device *phy) -+static void mvpp2_mac_link_up(struct phylink_config *config, -+ struct phy_device *phy, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct mvpp2_port *port = mvpp2_phylink_to_port(config); - u32 val; ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -449,9 +449,10 @@ static void mtk_mac_link_down(struct phy - mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); - } - --static void mtk_mac_link_up(struct phylink_config *config, unsigned int mode, -- phy_interface_t interface, -- struct phy_device *phy) -+static void mtk_mac_link_up(struct phylink_config *config, -+ struct phy_device *phy, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex, bool tx_pause, bool rx_pause) - { - struct mtk_mac *mac = container_of(config, struct mtk_mac, - phylink_config); ---- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c -@@ -925,8 +925,10 @@ static void stmmac_mac_link_down(struct - } - - static void stmmac_mac_link_up(struct phylink_config *config, -+ struct phy_device *phy, - unsigned int mode, phy_interface_t interface, -- struct phy_device *phy) -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev)); - ---- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c -+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c -@@ -1499,9 +1499,10 @@ static void axienet_mac_link_down(struct - } - - static void axienet_mac_link_up(struct phylink_config *config, -- unsigned int mode, -- phy_interface_t interface, -- struct phy_device *phy) -+ struct phy_device *phy, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - /* nothing meaningful to do */ - } ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -447,8 +447,11 @@ static void phylink_mac_link_up(struct p - struct net_device *ndev = pl->netdev; - - pl->cur_interface = link_state.interface; -- pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode, -- pl->cur_interface, pl->phydev); -+ pl->ops->mac_link_up(pl->config, pl->phydev, -+ pl->cur_link_an_mode, pl->cur_interface, -+ link_state.speed, link_state.duplex, -+ !!(link_state.pause & MLO_PAUSE_TX), -+ !!(link_state.pause & MLO_PAUSE_RX)); - - if (ndev) - netif_carrier_on(ndev); ---- a/include/linux/phylink.h -+++ b/include/linux/phylink.h -@@ -91,9 +91,10 @@ struct phylink_mac_ops { - void (*mac_an_restart)(struct phylink_config *config); - void (*mac_link_down)(struct phylink_config *config, unsigned int mode, - phy_interface_t interface); -- void (*mac_link_up)(struct phylink_config *config, unsigned int mode, -- phy_interface_t interface, -- struct phy_device *phy); -+ void (*mac_link_up)(struct phylink_config *config, -+ struct phy_device *phy, unsigned int mode, -+ phy_interface_t interface, int speed, int duplex, -+ bool tx_pause, bool rx_pause); - }; - - #if 0 /* For kernel-doc purposes only. */ -@@ -217,19 +218,34 @@ void mac_link_down(struct phylink_config - /** - * mac_link_up() - allow the link to come up - * @config: a pointer to a &struct phylink_config. -+ * @phy: any attached phy - * @mode: link autonegotiation mode - * @interface: link &typedef phy_interface_t mode -- * @phy: any attached phy -+ * @speed: link speed -+ * @duplex: link duplex -+ * @tx_pause: link transmit pause enablement status -+ * @rx_pause: link receive pause enablement status -+ * -+ * Configure the MAC for an established link. -+ * -+ * @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link -+ * settings, and should be used to configure the MAC block appropriately -+ * where these settings are not automatically conveyed from the PCS block, -+ * or if in-band negotiation (as defined by phylink_autoneg_inband(@mode)) -+ * is disabled. -+ * -+ * Note that when 802.3z in-band negotiation is in use, it is possible -+ * that the user wishes to override the pause settings, and this should -+ * be allowed when considering the implementation of this method. - * -- * If @mode is not an in-band negotiation mode (as defined by -- * phylink_autoneg_inband()), allow the link to come up. If @phy -- * is non-%NULL, configure Energy Efficient Ethernet by calling -+ * If in-band negotiation mode is disabled, allow the link to come up. If -+ * @phy is non-%NULL, configure Energy Efficient Ethernet by calling - * phy_init_eee() and perform appropriate MAC configuration for EEE. - * Interface type selection must be done in mac_config(). - */ --void mac_link_up(struct phylink_config *config, unsigned int mode, -- phy_interface_t interface, -- struct phy_device *phy); -+void mac_link_up(struct phylink_config *config, struct phy_device *phy, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex, bool tx_pause, bool rx_pause); - #endif - - struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *, ---- a/net/dsa/port.c -+++ b/net/dsa/port.c -@@ -529,9 +529,11 @@ void dsa_port_phylink_mac_link_down(stru - EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_down); - - void dsa_port_phylink_mac_link_up(struct phylink_config *config, -+ struct phy_device *phydev, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev) -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); - struct dsa_switch *ds = dp->ds; diff --git a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch deleted file mode 100644 index 0df300b627..0000000000 --- a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch +++ /dev/null @@ -1,143 +0,0 @@ -From: Russell King -Date: Wed, 26 Feb 2020 10:23:46 +0000 -Subject: [PATCH] net: dsa: propagate resolved link config via mac_link_up() - -Propagate the resolved link configuration down via DSA's -phylink_mac_link_up() operation to allow split PCS/MAC to work. - -Tested-by: Vladimir Oltean -Signed-off-by: Russell King -Signed-off-by: David S. Miller ---- - ---- a/drivers/net/dsa/b53/b53_common.c -+++ b/drivers/net/dsa/b53/b53_common.c -@@ -1284,7 +1284,9 @@ EXPORT_SYMBOL(b53_phylink_mac_link_down) - void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev) -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct b53_device *dev = ds->priv; - ---- a/drivers/net/dsa/b53/b53_priv.h -+++ b/drivers/net/dsa/b53/b53_priv.h -@@ -337,7 +337,9 @@ void b53_phylink_mac_link_down(struct ds - void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev); -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause); - int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering); - int b53_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan); ---- a/drivers/net/dsa/bcm_sf2.c -+++ b/drivers/net/dsa/bcm_sf2.c -@@ -636,7 +636,9 @@ static void bcm_sf2_sw_mac_link_down(str - static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev) -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - struct ethtool_eee *p = &priv->dev->ports[port].eee; ---- a/drivers/net/dsa/lantiq_gswip.c -+++ b/drivers/net/dsa/lantiq_gswip.c -@@ -1663,7 +1663,9 @@ static void gswip_phylink_mac_link_down( - static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev) -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct gswip_priv *priv = ds->priv; - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -1440,7 +1440,9 @@ static void mt7530_phylink_mac_link_down - static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev) -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - struct mt7530_priv *priv = ds->priv; - ---- a/drivers/net/dsa/mv88e6xxx/chip.c -+++ b/drivers/net/dsa/mv88e6xxx/chip.c -@@ -652,7 +652,9 @@ static void mv88e6xxx_mac_link_down(stru - - static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, phy_interface_t interface, -- struct phy_device *phydev) -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - if (mode == MLO_AN_FIXED) - mv88e6xxx_mac_link_force(ds, port, LINK_FORCED_UP); ---- a/drivers/net/dsa/sja1105/sja1105_main.c -+++ b/drivers/net/dsa/sja1105/sja1105_main.c -@@ -831,7 +831,9 @@ static void sja1105_mac_link_down(struct - static void sja1105_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev) -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause) - { - sja1105_inhibit_tx(ds->priv, BIT(port), false); - } ---- a/include/net/dsa.h -+++ b/include/net/dsa.h -@@ -406,7 +406,9 @@ struct dsa_switch_ops { - void (*phylink_mac_link_up)(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev); -+ struct phy_device *phydev, -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause); - void (*phylink_fixed_state)(struct dsa_switch *ds, int port, - struct phylink_link_state *state); - /* ---- a/net/dsa/port.c -+++ b/net/dsa/port.c -@@ -544,7 +544,8 @@ void dsa_port_phylink_mac_link_up(struct - return; - } - -- ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev); -+ ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev, -+ speed, duplex, tx_pause, rx_pause); - } - EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_up); - ---- a/net/dsa/dsa_priv.h -+++ b/net/dsa/dsa_priv.h -@@ -192,9 +192,11 @@ void dsa_port_phylink_mac_link_down(stru - unsigned int mode, - phy_interface_t interface); - void dsa_port_phylink_mac_link_up(struct phylink_config *config, -+ struct phy_device *phydev, - unsigned int mode, - phy_interface_t interface, -- struct phy_device *phydev); -+ int speed, int duplex, -+ bool tx_pause, bool rx_pause); - extern const struct phylink_mac_ops dsa_port_phylink_mac_ops; - - /* slave.c */ diff --git a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch deleted file mode 100644 index 23fba85252..0000000000 --- a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch +++ /dev/null @@ -1,145 +0,0 @@ -From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= -Date: Fri, 27 Mar 2020 15:44:12 +0100 -Subject: [PATCH] net: dsa: mt7530: use resolved link config in mac_link_up() -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Convert the mt7530 switch driver to use the finalised link -parameters in mac_link_up() rather than the parameters in mac_config(). - -Signed-off-by: René van Dorst -Tested-by: Sean Wang -Signed-off-by: David S. Miller ---- - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -489,17 +489,6 @@ mt7530_mib_reset(struct dsa_switch *ds) - mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE); - } - --static void --mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable) --{ -- u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK; -- -- if (enable) -- mt7530_set(priv, MT7530_PMCR_P(port), mask); -- else -- mt7530_clear(priv, MT7530_PMCR_P(port), mask); --} -- - static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum) - { - struct mt7530_priv *priv = ds->priv; -@@ -673,7 +662,7 @@ mt7530_port_enable(struct dsa_switch *ds - priv->ports[port].enable = true; - mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, - priv->ports[port].pm); -- mt7530_port_set_status(priv, port, 0); -+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); - - mutex_unlock(&priv->reg_mutex); - -@@ -696,7 +685,7 @@ mt7530_port_disable(struct dsa_switch *d - priv->ports[port].enable = false; - mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, - PCR_MATRIX_CLR); -- mt7530_port_set_status(priv, port, 0); -+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); - - mutex_unlock(&priv->reg_mutex); - } -@@ -1395,8 +1384,7 @@ static void mt7530_phylink_mac_config(st - - mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); - mcr_new = mcr_cur; -- mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 | -- PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN); -+ mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE; - -@@ -1404,26 +1392,6 @@ static void mt7530_phylink_mac_config(st - if (port == 5 && dsa_is_user_port(ds, 5)) - mcr_new |= PMCR_EXT_PHY; - -- switch (state->speed) { -- case SPEED_1000: -- mcr_new |= PMCR_FORCE_SPEED_1000; -- if (priv->eee_enable & BIT(port)) -- mcr_new |= PMCR_FORCE_EEE1G; -- break; -- case SPEED_100: -- mcr_new |= PMCR_FORCE_SPEED_100; -- if (priv->eee_enable & BIT(port)) -- mcr_new |= PMCR_FORCE_EEE100; -- break; -- } -- if (state->duplex == DUPLEX_FULL) { -- mcr_new |= PMCR_FORCE_FDX; -- if (state->pause & MLO_PAUSE_TX) -- mcr_new |= PMCR_TX_FC_EN; -- if (state->pause & MLO_PAUSE_RX) -- mcr_new |= PMCR_RX_FC_EN; -- } -- - if (mcr_new != mcr_cur) - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); - } -@@ -1434,7 +1402,7 @@ static void mt7530_phylink_mac_link_down - { - struct mt7530_priv *priv = ds->priv; - -- mt7530_port_set_status(priv, port, 0); -+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); - } - - static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, -@@ -1445,8 +1413,31 @@ static void mt7530_phylink_mac_link_up(s - bool tx_pause, bool rx_pause) - { - struct mt7530_priv *priv = ds->priv; -+ u32 mcr; -+ -+ mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; -+ -+ switch (speed) { -+ case SPEED_1000: -+ mcr |= PMCR_FORCE_SPEED_1000; -+ if (priv->eee_enable & BIT(port)) -+ mcr_new |= PMCR_FORCE_EEE1G; -+ break; -+ case SPEED_100: -+ mcr |= PMCR_FORCE_SPEED_100; -+ if (priv->eee_enable & BIT(port)) -+ mcr_new |= PMCR_FORCE_EEE100; -+ break; -+ } -+ if (duplex == DUPLEX_FULL) { -+ mcr |= PMCR_FORCE_FDX; -+ if (tx_pause) -+ mcr |= PMCR_TX_FC_EN; -+ if (rx_pause) -+ mcr |= PMCR_RX_FC_EN; -+ } - -- mt7530_port_set_status(priv, port, 1); -+ mt7530_set(priv, MT7530_PMCR_P(port), mcr); - } - - static void mt7530_phylink_validate(struct dsa_switch *ds, int port, ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -222,6 +222,10 @@ enum mt7530_vlan_port_attr { - #define PMCR_FORCE_LNK BIT(0) - #define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \ - PMCR_FORCE_SPEED_1000) -+#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ -+ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ -+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ -+ PMCR_FORCE_FDX | PMCR_FORCE_LNK) - - #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) - #define PMSR_EEE1G BIT(7) diff --git a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch deleted file mode 100644 index 718ed8ea2d..0000000000 --- a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch +++ /dev/null @@ -1,458 +0,0 @@ -From: Landen Chao -Date: Fri, 4 Sep 2020 22:21:57 +0800 -Subject: [PATCH] net: dsa: mt7530: Extend device data ready for adding a - new hardware - -Add a structure holding required operations for each device such as device -initialization, PHY port read or write, a checker whether PHY interface is -supported on a certain port, MAC port setup for either bus pad or a -specific PHY interface. - -The patch is done for ready adding a new hardware MT7531, and keep the -same setup logic of existing hardware. - -Signed-off-by: Landen Chao -Signed-off-by: Sean Wang ---- - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -373,8 +373,9 @@ mt7530_fdb_write(struct mt7530_priv *pri - mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]); - } - -+/* Setup TX circuit including relevant PAD and driving */ - static int --mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) -+mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) - { - struct mt7530_priv *priv = ds->priv; - u32 ncpo1, ssc_delta, trgint, i, xtal; -@@ -388,7 +389,7 @@ mt7530_pad_clk_setup(struct dsa_switch * - return -EINVAL; - } - -- switch (mode) { -+ switch (interface) { - case PHY_INTERFACE_MODE_RGMII: - trgint = 0; - /* PLL frequency: 125MHz */ -@@ -410,7 +411,8 @@ mt7530_pad_clk_setup(struct dsa_switch * - } - break; - default: -- dev_err(priv->dev, "xMII mode %d not supported\n", mode); -+ dev_err(priv->dev, "xMII interface %d not supported\n", -+ interface); - return -EINVAL; - } - -@@ -1332,12 +1334,11 @@ mt7530_setup(struct dsa_switch *ds) - return 0; - } - --static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, -- unsigned int mode, -- const struct phylink_link_state *state) -+static bool -+mt7530_phy_mode_supported(struct dsa_switch *ds, int port, -+ const struct phylink_link_state *state) - { - struct mt7530_priv *priv = ds->priv; -- u32 mcr_cur, mcr_new; - - switch (port) { - case 0: /* Internal phy */ -@@ -1346,33 +1347,114 @@ static void mt7530_phylink_mac_config(st - case 3: - case 4: - if (state->interface != PHY_INTERFACE_MODE_GMII) -- return; -+ goto unsupported; - break; - case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ -- if (priv->p5_interface == state->interface) -- break; - if (!phy_interface_mode_is_rgmii(state->interface) && - state->interface != PHY_INTERFACE_MODE_MII && - state->interface != PHY_INTERFACE_MODE_GMII) -- return; -+ goto unsupported; -+ break; -+ case 6: /* 1st cpu port */ -+ if (state->interface != PHY_INTERFACE_MODE_RGMII && -+ state->interface != PHY_INTERFACE_MODE_TRGMII) -+ goto unsupported; -+ break; -+ default: -+ dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, -+ port); -+ goto unsupported; -+ } -+ -+ return true; -+ -+unsupported: -+ return false; -+} -+ -+static bool -+mt753x_phy_mode_supported(struct dsa_switch *ds, int port, -+ const struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->phy_mode_supported(ds, port, state); -+} -+ -+static int -+mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->pad_setup(ds, state->interface); -+} -+ -+static int -+mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, -+ phy_interface_t interface) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ /* Only need to setup port5. */ -+ if (port != 5) -+ return 0; -+ -+ mt7530_setup_port5(priv->ds, interface); -+ -+ return 0; -+} -+ -+static int -+mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, -+ const struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->mac_port_config(ds, port, mode, state->interface); -+} -+ -+static void -+mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, -+ const struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ u32 mcr_cur, mcr_new; -+ -+ if (!mt753x_phy_mode_supported(ds, port, state)) -+ goto unsupported; -+ -+ switch (port) { -+ case 0: /* Internal phy */ -+ case 1: -+ case 2: -+ case 3: -+ case 4: -+ if (state->interface != PHY_INTERFACE_MODE_GMII) -+ goto unsupported; -+ break; -+ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ -+ if (priv->p5_interface == state->interface) -+ break; -+ -+ if (mt753x_mac_config(ds, port, mode, state) < 0) -+ goto unsupported; - -- mt7530_setup_port5(ds, state->interface); - break; - case 6: /* 1st cpu port */ - if (priv->p6_interface == state->interface) - break; - -- if (state->interface != PHY_INTERFACE_MODE_RGMII && -- state->interface != PHY_INTERFACE_MODE_TRGMII) -- return; -+ mt753x_pad_setup(ds, state); - -- /* Setup TX circuit incluing relevant PAD and driving */ -- mt7530_pad_clk_setup(ds, state->interface); -+ if (mt753x_mac_config(ds, port, mode, state) < 0) -+ goto unsupported; - - priv->p6_interface = state->interface; - break; - default: -- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); -+unsupported: -+ dev_err(ds->dev, "%s: unsupported %s port: %i\n", -+ __func__, phy_modes(state->interface), port); - return; - } - -@@ -1440,61 +1522,44 @@ static void mt7530_phylink_mac_link_up(s - mt7530_set(priv, MT7530_PMCR_P(port), mcr); - } - --static void mt7530_phylink_validate(struct dsa_switch *ds, int port, -- unsigned long *supported, -- struct phylink_link_state *state) -+static void -+mt7530_mac_port_validate(struct dsa_switch *ds, int port, -+ unsigned long *supported) - { -+ if (port == 5) -+ phylink_set(supported, 1000baseX_Full); -+} -+ -+static void -+mt753x_phylink_validate(struct dsa_switch *ds, int port, -+ unsigned long *supported, -+ struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - -- switch (port) { -- case 0: /* Internal phy */ -- case 1: -- case 2: -- case 3: -- case 4: -- if (state->interface != PHY_INTERFACE_MODE_NA && -- state->interface != PHY_INTERFACE_MODE_GMII) -- goto unsupported; -- break; -- case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ -- if (state->interface != PHY_INTERFACE_MODE_NA && -- !phy_interface_mode_is_rgmii(state->interface) && -- state->interface != PHY_INTERFACE_MODE_MII && -- state->interface != PHY_INTERFACE_MODE_GMII) -- goto unsupported; -- break; -- case 6: /* 1st cpu port */ -- if (state->interface != PHY_INTERFACE_MODE_NA && -- state->interface != PHY_INTERFACE_MODE_RGMII && -- state->interface != PHY_INTERFACE_MODE_TRGMII) -- goto unsupported; -- break; -- default: -- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); --unsupported: -+ if (state->interface != PHY_INTERFACE_MODE_NA && -+ !mt753x_phy_mode_supported(ds, port, state)) { - linkmode_zero(supported); - return; - } - - phylink_set_port_modes(mask); -- phylink_set(mask, Autoneg); - -- if (state->interface == PHY_INTERFACE_MODE_TRGMII) { -- phylink_set(mask, 1000baseT_Full); -- } else { -+ if (state->interface != PHY_INTERFACE_MODE_TRGMII) { - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); - phylink_set(mask, 100baseT_Full); -- -- if (state->interface != PHY_INTERFACE_MODE_MII) { -- /* This switch only supports 1G full-duplex. */ -- phylink_set(mask, 1000baseT_Full); -- if (port == 5) -- phylink_set(mask, 1000baseX_Full); -- } -+ phylink_set(mask, Autoneg); - } - -+ /* This switch only supports 1G full-duplex. */ -+ if (state->interface != PHY_INTERFACE_MODE_MII) -+ phylink_set(mask, 1000baseT_Full); -+ -+ priv->info->mac_port_validate(ds, port, mask); -+ - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - -@@ -1590,12 +1655,45 @@ static int mt7530_set_mac_eee(struct dsa - return 0; - } - -+static int -+mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, -+ struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->mac_port_get_state(ds, port, state); -+} -+ -+static int -+mt753x_setup(struct dsa_switch *ds) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->sw_setup(ds); -+} -+ -+static int -+mt753x_phy_read(struct dsa_switch *ds, int port, int regnum) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->phy_read(ds, port, regnum); -+} -+ -+static int -+mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ return priv->info->phy_write(ds, port, regnum, val); -+} -+ - static const struct dsa_switch_ops mt7530_switch_ops = { - .get_tag_protocol = mtk_get_tag_protocol, -- .setup = mt7530_setup, -+ .setup = mt753x_setup, - .get_strings = mt7530_get_strings, -- .phy_read = mt7530_phy_read, -- .phy_write = mt7530_phy_write, -+ .phy_read = mt753x_phy_read, -+ .phy_write = mt753x_phy_write, - .get_ethtool_stats = mt7530_get_ethtool_stats, - .get_sset_count = mt7530_get_sset_count, - .port_enable = mt7530_port_enable, -@@ -1612,18 +1710,43 @@ static const struct dsa_switch_ops mt753 - .port_vlan_del = mt7530_port_vlan_del, - .port_mirror_add = mt7530_port_mirror_add, - .port_mirror_del = mt7530_port_mirror_del, -- .phylink_validate = mt7530_phylink_validate, -- .phylink_mac_link_state = mt7530_phylink_mac_link_state, -- .phylink_mac_config = mt7530_phylink_mac_config, -+ .phylink_validate = mt753x_phylink_validate, -+ .phylink_mac_link_state = mt753x_phylink_mac_link_state, -+ .phylink_mac_config = mt753x_phylink_mac_config, - .phylink_mac_link_down = mt7530_phylink_mac_link_down, - .phylink_mac_link_up = mt7530_phylink_mac_link_up, - .get_mac_eee = mt7530_get_mac_eee, - .set_mac_eee = mt7530_set_mac_eee, - }; - -+static const struct mt753x_info mt753x_table[] = { -+ [ID_MT7621] = { -+ .id = ID_MT7621, -+ .sw_setup = mt7530_setup, -+ .phy_read = mt7530_phy_read, -+ .phy_write = mt7530_phy_write, -+ .pad_setup = mt7530_pad_clk_setup, -+ .phy_mode_supported = mt7530_phy_mode_supported, -+ .mac_port_validate = mt7530_mac_port_validate, -+ .mac_port_get_state = mt7530_phylink_mac_link_state, -+ .mac_port_config = mt7530_mac_config, -+ }, -+ [ID_MT7530] = { -+ .id = ID_MT7530, -+ .sw_setup = mt7530_setup, -+ .phy_read = mt7530_phy_read, -+ .phy_write = mt7530_phy_write, -+ .pad_setup = mt7530_pad_clk_setup, -+ .phy_mode_supported = mt7530_phy_mode_supported, -+ .mac_port_validate = mt7530_mac_port_validate, -+ .mac_port_get_state = mt7530_phylink_mac_link_state, -+ .mac_port_config = mt7530_mac_config, -+ }, -+}; -+ - static const struct of_device_id mt7530_of_match[] = { -- { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, }, -- { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, }, -+ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, -+ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, - { /* sentinel */ }, - }; - MODULE_DEVICE_TABLE(of, mt7530_of_match); -@@ -1661,8 +1784,21 @@ mt7530_probe(struct mdio_device *mdiodev - /* Get the hardware identifier from the devicetree node. - * We will need it for some of the clock and regulator setup. - */ -- priv->id = (unsigned int)(unsigned long) -- of_device_get_match_data(&mdiodev->dev); -+ priv->info = of_device_get_match_data(&mdiodev->dev); -+ if (!priv->info) -+ return -EINVAL; -+ -+ /* Sanity check if these required device operations are filled -+ * properly. -+ */ -+ if (!priv->info->sw_setup || !priv->info->pad_setup || -+ !priv->info->phy_read || !priv->info->phy_write || -+ !priv->info->phy_mode_supported || -+ !priv->info->mac_port_validate || -+ !priv->info->mac_port_get_state || !priv->info->mac_port_config) -+ return -EINVAL; -+ -+ priv->id = priv->info->id; - - if (priv->id == ID_MT7530) { - priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core"); ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -11,7 +11,7 @@ - #define MT7530_NUM_FDB_RECORDS 2048 - #define MT7530_ALL_MEMBERS 0xff - --enum { -+enum mt753x_id { - ID_MT7530 = 0, - ID_MT7621 = 1, - }; -@@ -451,6 +451,40 @@ static const char *p5_intf_modes(unsigne - } - } - -+/* struct mt753x_info - This is the main data structure for holding the specific -+ * part for each supported device -+ * @sw_setup: Holding the handler to a device initialization -+ * @phy_read: Holding the way reading PHY port -+ * @phy_write: Holding the way writing PHY port -+ * @pad_setup: Holding the way setting up the bus pad for a certain -+ * MAC port -+ * @phy_mode_supported: Check if the PHY type is being supported on a certain -+ * port -+ * @mac_port_validate: Holding the way to set addition validate type for a -+ * certan MAC port -+ * @mac_port_get_state: Holding the way getting the MAC/PCS state for a certain -+ * MAC port -+ * @mac_port_config: Holding the way setting up the PHY attribute to a -+ * certain MAC port -+ */ -+struct mt753x_info { -+ enum mt753x_id id; -+ -+ int (*sw_setup)(struct dsa_switch *ds); -+ int (*phy_read)(struct dsa_switch *ds, int port, int regnum); -+ int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val); -+ int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); -+ bool (*phy_mode_supported)(struct dsa_switch *ds, int port, -+ const struct phylink_link_state *state); -+ void (*mac_port_validate)(struct dsa_switch *ds, int port, -+ unsigned long *supported); -+ int (*mac_port_get_state)(struct dsa_switch *ds, int port, -+ struct phylink_link_state *state); -+ int (*mac_port_config)(struct dsa_switch *ds, int port, -+ unsigned int mode, -+ phy_interface_t interface); -+}; -+ - /* struct mt7530_priv - This is the main data structure for holding the state - * of the driver - * @dev: The device pointer -@@ -476,6 +510,7 @@ struct mt7530_priv { - struct regulator *core_pwr; - struct regulator *io_pwr; - struct gpio_desc *reset; -+ const struct mt753x_info *info; - unsigned int id; - bool mcm; - phy_interface_t p6_interface; diff --git a/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch b/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch deleted file mode 100644 index 8ede862204..0000000000 --- a/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch +++ /dev/null @@ -1,1510 +0,0 @@ -From: Landen Chao -Date: Fri, 4 Sep 2020 22:21:59 +0800 -Subject: [PATCH] net: dsa: mt7530: Add the support of MT7531 switch - -Add new support for MT7531: - -MT7531 is the next generation of MT7530. It is also a 7-ports switch with -5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu -port 6 only supports SGMII interface. Cpu port 5 supports either RGMII -or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like -mt7530. Due to SGMII interface support, pll, and pad setting are different -from MT7530. This patch adds different initial setting, and SGMII phylink -handlers of MT7531. - -MT7531 SGMII interface can be configured in following mode: -- 'SGMII AN mode' with in-band negotiation capability - which is compatible with PHY_INTERFACE_MODE_SGMII. -- 'SGMII force mode' without in-band negotiation - which is compatible with 10B/8B encoding of - PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause. -- 2.5 times faster clocked 'SGMII force mode' without in-band negotiation - which is compatible with 10B/8B encoding of - PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause. - -Signed-off-by: Landen Chao -Signed-off-by: Sean Wang ---- - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -235,6 +235,12 @@ mt7530_write(struct mt7530_priv *priv, u - } - - static u32 -+_mt7530_unlocked_read(struct mt7530_dummy_poll *p) -+{ -+ return mt7530_mii_read(p->priv, p->reg); -+} -+ -+static u32 - _mt7530_read(struct mt7530_dummy_poll *p) - { - struct mii_bus *bus = p->priv->bus; -@@ -482,6 +488,108 @@ mt7530_pad_clk_setup(struct dsa_switch * - return 0; - } - -+static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) -+{ -+ u32 val; -+ -+ val = mt7530_read(priv, MT7531_TOP_SIG_SR); -+ -+ return (val & PAD_DUAL_SGMII_EN) != 0; -+} -+ -+static int -+mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ u32 val; -+ u32 top_sig; -+ u32 hwstrap; -+ u32 xtal; -+ -+ if (mt7531_dual_sgmii_supported(priv)) -+ return 0; -+ -+ val = mt7530_read(priv, MT7531_CREV); -+ top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); -+ hwstrap = mt7530_read(priv, MT7531_HWTRAP); -+ if ((val & CHIP_REV_M) > 0) -+ xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ : -+ HWTRAP_XTAL_FSEL_25MHZ; -+ else -+ xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK; -+ -+ /* Step 1 : Disable MT7531 COREPLL */ -+ val = mt7530_read(priv, MT7531_PLLGP_EN); -+ val &= ~EN_COREPLL; -+ mt7530_write(priv, MT7531_PLLGP_EN, val); -+ -+ /* Step 2: switch to XTAL output */ -+ val = mt7530_read(priv, MT7531_PLLGP_EN); -+ val |= SW_CLKSW; -+ mt7530_write(priv, MT7531_PLLGP_EN, val); -+ -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val &= ~RG_COREPLL_EN; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ -+ /* Step 3: disable PLLGP and enable program PLLGP */ -+ val = mt7530_read(priv, MT7531_PLLGP_EN); -+ val |= SW_PLLGP; -+ mt7530_write(priv, MT7531_PLLGP_EN, val); -+ -+ /* Step 4: program COREPLL output frequency to 500MHz */ -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val &= ~RG_COREPLL_POSDIV_M; -+ val |= 2 << RG_COREPLL_POSDIV_S; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ usleep_range(25, 35); -+ -+ switch (xtal) { -+ case HWTRAP_XTAL_FSEL_25MHZ: -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val &= ~RG_COREPLL_SDM_PCW_M; -+ val |= 0x140000 << RG_COREPLL_SDM_PCW_S; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ break; -+ case HWTRAP_XTAL_FSEL_40MHZ: -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val &= ~RG_COREPLL_SDM_PCW_M; -+ val |= 0x190000 << RG_COREPLL_SDM_PCW_S; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ break; -+ }; -+ -+ /* Set feedback divide ratio update signal to high */ -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val |= RG_COREPLL_SDM_PCW_CHG; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ /* Wait for at least 16 XTAL clocks */ -+ usleep_range(10, 20); -+ -+ /* Step 5: set feedback divide ratio update signal to low */ -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val &= ~RG_COREPLL_SDM_PCW_CHG; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ -+ /* Enable 325M clock for SGMII */ -+ mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000); -+ -+ /* Enable 250SSC clock for RGMII */ -+ mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000); -+ -+ /* Step 6: Enable MT7531 PLL */ -+ val = mt7530_read(priv, MT7531_PLLGP_CR0); -+ val |= RG_COREPLL_EN; -+ mt7530_write(priv, MT7531_PLLGP_CR0, val); -+ -+ val = mt7530_read(priv, MT7531_PLLGP_EN); -+ val |= EN_COREPLL; -+ mt7530_write(priv, MT7531_PLLGP_EN, val); -+ usleep_range(25, 35); -+ -+ return 0; -+} -+ - static void - mt7530_mib_reset(struct dsa_switch *ds) - { -@@ -506,6 +614,217 @@ static int mt7530_phy_write(struct dsa_s - return mdiobus_write_nested(priv->bus, port, regnum, val); - } - -+static int -+mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, -+ int regnum) -+{ -+ struct mii_bus *bus = priv->bus; -+ struct mt7530_dummy_poll p; -+ u32 reg, val; -+ int ret; -+ -+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); -+ -+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | -+ MT7531_MDIO_DEV_ADDR(devad) | regnum; -+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) | -+ MT7531_MDIO_DEV_ADDR(devad); -+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ ret = val & MT7531_MDIO_RW_DATA_MASK; -+out: -+ mutex_unlock(&bus->mdio_lock); -+ -+ return ret; -+} -+ -+static int -+mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, -+ int regnum, u32 data) -+{ -+ struct mii_bus *bus = priv->bus; -+ struct mt7530_dummy_poll p; -+ u32 val, reg; -+ int ret; -+ -+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); -+ -+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) | -+ MT7531_MDIO_DEV_ADDR(devad) | regnum; -+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) | -+ MT7531_MDIO_DEV_ADDR(devad) | data; -+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+out: -+ mutex_unlock(&bus->mdio_lock); -+ -+ return ret; -+} -+ -+static int -+mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) -+{ -+ struct mii_bus *bus = priv->bus; -+ struct mt7530_dummy_poll p; -+ int ret; -+ u32 val; -+ -+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); -+ -+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) | -+ MT7531_MDIO_REG_ADDR(regnum); -+ -+ mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, -+ !(val & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ ret = val & MT7531_MDIO_RW_DATA_MASK; -+out: -+ mutex_unlock(&bus->mdio_lock); -+ -+ return ret; -+} -+ -+static int -+mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, -+ u16 data) -+{ -+ struct mii_bus *bus = priv->bus; -+ struct mt7530_dummy_poll p; -+ int ret; -+ u32 reg; -+ -+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC); -+ -+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, -+ !(reg & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+ reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) | -+ MT7531_MDIO_REG_ADDR(regnum) | data; -+ -+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST); -+ -+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, -+ !(reg & MT7531_PHY_ACS_ST), 20, 100000); -+ if (ret < 0) { -+ dev_err(priv->dev, "poll timeout\n"); -+ goto out; -+ } -+ -+out: -+ mutex_unlock(&bus->mdio_lock); -+ -+ return ret; -+} -+ -+static int -+mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ int devad; -+ int ret; -+ -+ if (regnum & MII_ADDR_C45) { -+ devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; -+ ret = mt7531_ind_c45_phy_read(priv, port, devad, -+ regnum & MII_REGADDR_C45_MASK); -+ } else { -+ ret = mt7531_ind_c22_phy_read(priv, port, regnum); -+ } -+ -+ return ret; -+} -+ -+static int -+mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum, -+ u16 data) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ int devad; -+ int ret; -+ -+ if (regnum & MII_ADDR_C45) { -+ devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f; -+ ret = mt7531_ind_c45_phy_write(priv, port, devad, -+ regnum & MII_REGADDR_C45_MASK, -+ data); -+ } else { -+ ret = mt7531_ind_c22_phy_write(priv, port, regnum, data); -+ } -+ -+ return ret; -+} -+ - static void - mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset, - uint8_t *data) -@@ -622,9 +941,14 @@ unlock_exit: - } - - static int --mt7530_cpu_port_enable(struct mt7530_priv *priv, -- int port) -+mt753x_cpu_port_enable(struct dsa_switch *ds, int port) - { -+ struct mt7530_priv *priv = ds->priv; -+ -+ /* Setup max capability of CPU port at first */ -+ if (priv->info->cpu_port_config) -+ priv->info->cpu_port_config(ds, port); -+ - /* Enable Mediatek header mode on the cpu port */ - mt7530_write(priv, MT7530_PVC_P(port), - PORT_SPEC_TAG); -@@ -637,7 +961,7 @@ mt7530_cpu_port_enable(struct mt7530_pri - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - - /* CPU port gets connected to all user ports of -- * the switch -+ * the switch. - */ - mt7530_write(priv, MT7530_PCR_P(port), - PCR_MATRIX(dsa_user_ports(priv->ds))); -@@ -1120,27 +1444,42 @@ mt7530_port_vlan_del(struct dsa_switch * - return 0; - } - --static int mt7530_port_mirror_add(struct dsa_switch *ds, int port, -+static int mt753x_mirror_port_get(unsigned int id, u32 val) -+{ -+ return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) : -+ MIRROR_PORT(val); -+} -+ -+static int mt753x_mirror_port_set(unsigned int id, u32 val) -+{ -+ return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) : -+ MIRROR_PORT(val); -+} -+ -+static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror, - bool ingress) - { - struct mt7530_priv *priv = ds->priv; -+ int monitor_port; - u32 val; - - /* Check for existent entry */ - if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port)) - return -EEXIST; - -- val = mt7530_read(priv, MT7530_MFC); -+ val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); - - /* MT7530 only supports one monitor port */ -- if (val & MIRROR_EN && MIRROR_PORT(val) != mirror->to_local_port) -+ monitor_port = mt753x_mirror_port_get(priv->id, val); -+ if (val & MT753X_MIRROR_EN(priv->id) && -+ monitor_port != mirror->to_local_port) - return -EEXIST; - -- val |= MIRROR_EN; -- val &= ~MIRROR_MASK; -- val |= mirror->to_local_port; -- mt7530_write(priv, MT7530_MFC, val); -+ val |= MT753X_MIRROR_EN(priv->id); -+ val &= ~MT753X_MIRROR_MASK(priv->id); -+ val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port); -+ mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); - - val = mt7530_read(priv, MT7530_PCR_P(port)); - if (ingress) { -@@ -1155,7 +1494,7 @@ static int mt7530_port_mirror_add(struct - return 0; - } - --static void mt7530_port_mirror_del(struct dsa_switch *ds, int port, -+static void mt753x_port_mirror_del(struct dsa_switch *ds, int port, - struct dsa_mall_mirror_tc_entry *mirror) - { - struct mt7530_priv *priv = ds->priv; -@@ -1172,9 +1511,9 @@ static void mt7530_port_mirror_del(struc - mt7530_write(priv, MT7530_PCR_P(port), val); - - if (!priv->mirror_rx && !priv->mirror_tx) { -- val = mt7530_read(priv, MT7530_MFC); -- val &= ~MIRROR_EN; -- mt7530_write(priv, MT7530_MFC, val); -+ val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); -+ val &= ~MT753X_MIRROR_EN(priv->id); -+ mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); - } - } - -@@ -1280,7 +1619,7 @@ mt7530_setup(struct dsa_switch *ds) - PCR_MATRIX_CLR); - - if (dsa_is_cpu_port(ds, i)) -- mt7530_cpu_port_enable(priv, i); -+ mt753x_cpu_port_enable(ds, i); - else - mt7530_port_disable(ds, i); - -@@ -1334,6 +1673,118 @@ mt7530_setup(struct dsa_switch *ds) - return 0; - } - -+static int -+mt7531_setup(struct dsa_switch *ds) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ struct mt7530_dummy_poll p; -+ u32 val, id; -+ int ret, i; -+ -+ /* Reset whole chip through gpio pin or memory-mapped registers for -+ * different type of hardware -+ */ -+ if (priv->mcm) { -+ reset_control_assert(priv->rstc); -+ usleep_range(1000, 1100); -+ reset_control_deassert(priv->rstc); -+ } else { -+ gpiod_set_value_cansleep(priv->reset, 0); -+ usleep_range(1000, 1100); -+ gpiod_set_value_cansleep(priv->reset, 1); -+ } -+ -+ /* Waiting for MT7530 got to stable */ -+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP); -+ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, -+ 20, 1000000); -+ if (ret < 0) { -+ dev_err(priv->dev, "reset timeout\n"); -+ return ret; -+ } -+ -+ id = mt7530_read(priv, MT7531_CREV); -+ id >>= CHIP_NAME_SHIFT; -+ -+ if (id != MT7531_ID) { -+ dev_err(priv->dev, "chip %x can't be supported\n", id); -+ return -ENODEV; -+ } -+ -+ /* Reset the switch through internal reset */ -+ mt7530_write(priv, MT7530_SYS_CTRL, -+ SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | -+ SYS_CTRL_REG_RST); -+ -+ if (mt7531_dual_sgmii_supported(priv)) { -+ priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; -+ -+ /* Let ds->slave_mii_bus be able to access external phy. */ -+ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK, -+ MT7531_EXT_P_MDC_11); -+ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK, -+ MT7531_EXT_P_MDIO_12); -+ } else { -+ priv->p5_intf_sel = P5_INTF_SEL_GMAC5; -+ } -+ dev_dbg(ds->dev, "P5 support %s interface\n", -+ p5_intf_modes(priv->p5_intf_sel)); -+ -+ mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, -+ MT7531_GPIO0_INTERRUPT); -+ -+ /* Let phylink decide the interface later. */ -+ priv->p5_interface = PHY_INTERFACE_MODE_NA; -+ priv->p6_interface = PHY_INTERFACE_MODE_NA; -+ -+ /* Enable PHY core PLL, since phy_device has not yet been created -+ * provided for phy_[read,write]_mmd_indirect is called, we provide -+ * our own mt7531_ind_mmd_phy_[read,write] to complete this -+ * function. -+ */ -+ val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, -+ MDIO_MMD_VEND2, CORE_PLL_GROUP4); -+ val |= MT7531_PHY_PLL_BYPASS_MODE; -+ val &= ~MT7531_PHY_PLL_OFF; -+ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, -+ CORE_PLL_GROUP4, val); -+ -+ /* BPDU to CPU port */ -+ mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, -+ BIT(MT7530_CPU_PORT)); -+ mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, -+ MT753X_BPDU_CPU_ONLY); -+ -+ /* Enable and reset MIB counters */ -+ mt7530_mib_reset(ds); -+ -+ for (i = 0; i < MT7530_NUM_PORTS; i++) { -+ /* Disable forwarding by default on all ports */ -+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, -+ PCR_MATRIX_CLR); -+ -+ mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); -+ -+ if (dsa_is_cpu_port(ds, i)) -+ mt753x_cpu_port_enable(ds, i); -+ else -+ mt7530_port_disable(ds, i); -+ -+ /* Enable consistent egress tag */ -+ mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK, -+ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); -+ } -+ -+ ds->configure_vlan_while_not_filtering = true; -+ -+ /* Flush the FDB table */ -+ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); -+ if (ret < 0) -+ return ret; -+ -+ return 0; -+} -+ - static bool - mt7530_phy_mode_supported(struct dsa_switch *ds, int port, - const struct phylink_link_state *state) -@@ -1372,6 +1823,47 @@ unsupported: - return false; - } - -+static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) -+{ -+ return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); -+} -+ -+static bool -+mt7531_phy_supported(struct dsa_switch *ds, int port, -+ const struct phylink_link_state *state) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ switch (port) { -+ case 0: /* Internal phy */ -+ case 1: -+ case 2: -+ case 3: -+ case 4: -+ if (state->interface != PHY_INTERFACE_MODE_GMII) -+ goto unsupported; -+ break; -+ case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ -+ if (mt7531_is_rgmii_port(priv, port)) -+ return phy_interface_mode_is_rgmii(state->interface); -+ fallthrough; -+ case 6: /* 1st cpu port supports sgmii/8023z only */ -+ if (state->interface != PHY_INTERFACE_MODE_SGMII && -+ !phy_interface_mode_is_8023z(state->interface)) -+ goto unsupported; -+ break; -+ default: -+ dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, -+ port); -+ goto unsupported; -+ } -+ -+ return true; -+ -+unsupported: -+ return false; -+} -+ - static bool - mt753x_phy_mode_supported(struct dsa_switch *ds, int port, - const struct phylink_link_state *state) -@@ -1404,6 +1896,227 @@ mt7530_mac_config(struct dsa_switch *ds, - return 0; - } - -+static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port, -+ phy_interface_t interface, -+ struct phy_device *phydev) -+{ -+ u32 val; -+ -+ if (!mt7531_is_rgmii_port(priv, port)) { -+ dev_err(priv->dev, "RGMII mode is not available for port %d\n", -+ port); -+ return -EINVAL; -+ } -+ -+ val = mt7530_read(priv, MT7531_CLKGEN_CTRL); -+ val |= GP_CLK_EN; -+ val &= ~GP_MODE_MASK; -+ val |= GP_MODE(MT7531_GP_MODE_RGMII); -+ val &= ~CLK_SKEW_IN_MASK; -+ val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG); -+ val &= ~CLK_SKEW_OUT_MASK; -+ val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG); -+ val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY; -+ -+ /* Do not adjust rgmii delay when vendor phy driver presents. */ -+ if (!phydev || phy_driver_is_genphy(phydev)) { -+ val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY); -+ switch (interface) { -+ case PHY_INTERFACE_MODE_RGMII: -+ val |= TXCLK_NO_REVERSE; -+ val |= RXCLK_NO_DELAY; -+ break; -+ case PHY_INTERFACE_MODE_RGMII_RXID: -+ val |= TXCLK_NO_REVERSE; -+ break; -+ case PHY_INTERFACE_MODE_RGMII_TXID: -+ val |= RXCLK_NO_DELAY; -+ break; -+ case PHY_INTERFACE_MODE_RGMII_ID: -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ mt7530_write(priv, MT7531_CLKGEN_CTRL, val); -+ -+ return 0; -+} -+ -+static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port, -+ unsigned long *supported) -+{ -+ /* Port5 supports ethier RGMII or SGMII. -+ * Port6 supports SGMII only. -+ */ -+ switch (port) { -+ case 5: -+ if (mt7531_is_rgmii_port(priv, port)) -+ break; -+ fallthrough; -+ case 6: -+ phylink_set(supported, 1000baseX_Full); -+ phylink_set(supported, 2500baseX_Full); -+ phylink_set(supported, 2500baseT_Full); -+ } -+} -+ -+static void -+mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ unsigned int val; -+ -+ /* For adjusting speed and duplex of SGMII force mode. */ -+ if (interface != PHY_INTERFACE_MODE_SGMII || -+ phylink_autoneg_inband(mode)) -+ return; -+ -+ /* SGMII force mode setting */ -+ val = mt7530_read(priv, MT7531_SGMII_MODE(port)); -+ val &= ~MT7531_SGMII_IF_MODE_MASK; -+ -+ switch (speed) { -+ case SPEED_10: -+ val |= MT7531_SGMII_FORCE_SPEED_10; -+ break; -+ case SPEED_100: -+ val |= MT7531_SGMII_FORCE_SPEED_100; -+ break; -+ case SPEED_1000: -+ val |= MT7531_SGMII_FORCE_SPEED_1000; -+ break; -+ } -+ -+ /* MT7531 SGMII 1G force mode can only work in full duplex mode, -+ * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. -+ */ -+ if ((speed == SPEED_10 || speed == SPEED_100) && -+ duplex != DUPLEX_FULL) -+ val |= MT7531_SGMII_FORCE_HALF_DUPLEX; -+ -+ mt7530_write(priv, MT7531_SGMII_MODE(port), val); -+} -+ -+static bool mt753x_is_mac_port(u32 port) -+{ -+ return (port == 5 || port == 6); -+} -+ -+static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port, -+ phy_interface_t interface) -+{ -+ u32 val; -+ -+ if (!mt753x_is_mac_port(port)) -+ return -EINVAL; -+ -+ mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), -+ MT7531_SGMII_PHYA_PWD); -+ -+ val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port)); -+ val &= ~MT7531_RG_TPHY_SPEED_MASK; -+ /* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B -+ * encoding. -+ */ -+ val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ? -+ MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G; -+ mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val); -+ -+ mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); -+ -+ /* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex -+ * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. -+ */ -+ mt7530_rmw(priv, MT7531_SGMII_MODE(port), -+ MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS, -+ MT7531_SGMII_FORCE_SPEED_1000); -+ -+ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); -+ -+ return 0; -+} -+ -+static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port, -+ phy_interface_t interface) -+{ -+ if (!mt753x_is_mac_port(port)) -+ return -EINVAL; -+ -+ mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port), -+ MT7531_SGMII_PHYA_PWD); -+ -+ mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port), -+ MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G); -+ -+ mt7530_set(priv, MT7531_SGMII_MODE(port), -+ MT7531_SGMII_REMOTE_FAULT_DIS | -+ MT7531_SGMII_SPEED_DUPLEX_AN); -+ -+ mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port), -+ MT7531_SGMII_TX_CONFIG_MASK, 1); -+ -+ mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE); -+ -+ mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART); -+ -+ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0); -+ -+ return 0; -+} -+ -+static void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ u32 val; -+ -+ /* Only restart AN when AN is enabled */ -+ val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); -+ if (val & MT7531_SGMII_AN_ENABLE) { -+ val |= MT7531_SGMII_AN_RESTART; -+ mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val); -+ } -+} -+ -+static int -+mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, -+ phy_interface_t interface) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ struct phy_device *phydev; -+ const struct dsa_port *dp; -+ -+ if (!mt753x_is_mac_port(port)) { -+ dev_err(priv->dev, "port %d is not a MAC port\n", port); -+ return -EINVAL; -+ } -+ -+ switch (interface) { -+ case PHY_INTERFACE_MODE_RGMII: -+ case PHY_INTERFACE_MODE_RGMII_ID: -+ case PHY_INTERFACE_MODE_RGMII_RXID: -+ case PHY_INTERFACE_MODE_RGMII_TXID: -+ dp = dsa_to_port(ds, port); -+ phydev = dp->slave->phydev; -+ return mt7531_rgmii_setup(priv, port, interface, phydev); -+ case PHY_INTERFACE_MODE_SGMII: -+ return mt7531_sgmii_setup_mode_an(priv, port, interface); -+ case PHY_INTERFACE_MODE_NA: -+ case PHY_INTERFACE_MODE_1000BASEX: -+ case PHY_INTERFACE_MODE_2500BASEX: -+ if (phylink_autoneg_inband(mode)) -+ return -EINVAL; -+ -+ return mt7531_sgmii_setup_mode_force(priv, port, interface); -+ default: -+ return -EINVAL; -+ } -+ -+ return -EINVAL; -+} -+ - static int - mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - const struct phylink_link_state *state) -@@ -1439,6 +2152,8 @@ mt753x_phylink_mac_config(struct dsa_swi - if (mt753x_mac_config(ds, port, mode, state) < 0) - goto unsupported; - -+ if (priv->p5_intf_sel != P5_DISABLED) -+ priv->p5_interface = state->interface; - break; - case 6: /* 1st cpu port */ - if (priv->p6_interface == state->interface) -@@ -1458,7 +2173,8 @@ unsupported: - return; - } - -- if (phylink_autoneg_inband(mode)) { -+ if (phylink_autoneg_inband(mode) && -+ state->interface != PHY_INTERFACE_MODE_SGMII) { - dev_err(ds->dev, "%s: in-band negotiation unsupported\n", - __func__); - return; -@@ -1468,7 +2184,7 @@ unsupported: - mcr_new = mcr_cur; - mcr_new &= ~PMCR_LINK_SETTINGS_MASK; - mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | -- PMCR_BACKPR_EN | PMCR_FORCE_MODE; -+ PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id); - - /* Are we connected to external phy */ - if (port == 5 && dsa_is_user_port(ds, 5)) -@@ -1478,7 +2194,18 @@ unsupported: - mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); - } - --static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, -+static void -+mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ if (!priv->info->mac_pcs_an_restart) -+ return; -+ -+ priv->info->mac_pcs_an_restart(ds, port); -+} -+ -+static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface) - { -@@ -1487,7 +2214,19 @@ static void mt7530_phylink_mac_link_down - mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); - } - --static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, -+static void mt753x_mac_pcs_link_up(struct dsa_switch *ds, int port, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ if (!priv->info->mac_pcs_link_up) -+ return; -+ -+ priv->info->mac_pcs_link_up(ds, port, mode, interface, speed, duplex); -+} -+ -+static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface, - struct phy_device *phydev, -@@ -1497,18 +2236,29 @@ static void mt7530_phylink_mac_link_up(s - struct mt7530_priv *priv = ds->priv; - u32 mcr; - -+ mt753x_mac_pcs_link_up(ds, port, mode, interface, speed, duplex); -+ - mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; - -+ /* MT753x MAC works in 1G full duplex mode for all up-clocked -+ * variants. -+ */ -+ if (interface == PHY_INTERFACE_MODE_TRGMII || -+ (phy_interface_mode_is_8023z(interface))) { -+ speed = SPEED_1000; -+ duplex = DUPLEX_FULL; -+ } -+ - switch (speed) { - case SPEED_1000: - mcr |= PMCR_FORCE_SPEED_1000; - if (priv->eee_enable & BIT(port)) -- mcr_new |= PMCR_FORCE_EEE1G; -+ mcr |= PMCR_FORCE_EEE1G; - break; - case SPEED_100: - mcr |= PMCR_FORCE_SPEED_100; - if (priv->eee_enable & BIT(port)) -- mcr_new |= PMCR_FORCE_EEE100; -+ mcr |= PMCR_FORCE_EEE100; - break; - } - if (duplex == DUPLEX_FULL) { -@@ -1522,6 +2272,45 @@ static void mt7530_phylink_mac_link_up(s - mt7530_set(priv, MT7530_PMCR_P(port), mcr); - } - -+static int -+mt7531_cpu_port_config(struct dsa_switch *ds, int port) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ phy_interface_t interface; -+ int speed; -+ -+ switch (port) { -+ case 5: -+ if (mt7531_is_rgmii_port(priv, port)) -+ interface = PHY_INTERFACE_MODE_RGMII; -+ else -+ interface = PHY_INTERFACE_MODE_2500BASEX; -+ -+ priv->p5_interface = interface; -+ break; -+ case 6: -+ interface = PHY_INTERFACE_MODE_2500BASEX; -+ -+ mt7531_pad_setup(ds, interface); -+ -+ priv->p6_interface = interface; -+ break; -+ }; -+ -+ if (interface == PHY_INTERFACE_MODE_2500BASEX) -+ speed = SPEED_2500; -+ else -+ speed = SPEED_1000; -+ -+ mt7531_mac_config(ds, port, MLO_AN_FIXED, interface); -+ mt7530_write(priv, MT7530_PMCR_P(port), -+ PMCR_CPU_PORT_SETTING(priv->id)); -+ mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, -+ speed, DUPLEX_FULL, true, true); -+ -+ return 0; -+} -+ - static void - mt7530_mac_port_validate(struct dsa_switch *ds, int port, - unsigned long *supported) -@@ -1530,6 +2319,14 @@ mt7530_mac_port_validate(struct dsa_swit - phylink_set(supported, 1000baseX_Full); - } - -+static void mt7531_mac_port_validate(struct dsa_switch *ds, int port, -+ unsigned long *supported) -+{ -+ struct mt7530_priv *priv = ds->priv; -+ -+ mt7531_sgmii_validate(priv, port, supported); -+} -+ - static void - mt753x_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, -@@ -1546,7 +2343,8 @@ mt753x_phylink_validate(struct dsa_switc - - phylink_set_port_modes(mask); - -- if (state->interface != PHY_INTERFACE_MODE_TRGMII) { -+ if (state->interface != PHY_INTERFACE_MODE_TRGMII || -+ !phy_interface_mode_is_8023z(state->interface)) { - phylink_set(mask, 10baseT_Half); - phylink_set(mask, 10baseT_Full); - phylink_set(mask, 100baseT_Half); -@@ -1565,6 +2363,11 @@ mt753x_phylink_validate(struct dsa_switc - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); -+ -+ /* We can only operate at 2500BaseX or 1000BaseX. If requested -+ * to advertise both, only report advertising at 2500BaseX. -+ */ -+ phylink_helper_basex_speed(state); - } - - static int -@@ -1655,6 +2458,63 @@ static int mt7530_set_mac_eee(struct dsa - return 0; - } - -+#ifdef notyet -+static int -+mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port, -+ struct phylink_link_state *state) -+{ -+ u32 status, val; -+ u16 config_reg; -+ -+ status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port)); -+ state->link = !!(status & MT7531_SGMII_LINK_STATUS); -+ if (state->interface == PHY_INTERFACE_MODE_SGMII && -+ (status & MT7531_SGMII_AN_ENABLE)) { -+ val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port)); -+ config_reg = val >> 16; -+ -+ switch (config_reg & LPA_SGMII_SPD_MASK) { -+ case LPA_SGMII_1000: -+ state->speed = SPEED_1000; -+ break; -+ case LPA_SGMII_100: -+ state->speed = SPEED_100; -+ break; -+ case LPA_SGMII_10: -+ state->speed = SPEED_10; -+ break; -+ default: -+ dev_err(priv->dev, "invalid sgmii PHY speed\n"); -+ state->link = false; -+ return -EINVAL; -+ } -+ -+ if (config_reg & LPA_SGMII_FULL_DUPLEX) -+ state->duplex = DUPLEX_FULL; -+ else -+ state->duplex = DUPLEX_HALF; -+ } -+ -+ return 0; -+} -+#endif -+ -+static int -+mt7531_phylink_mac_link_state(struct dsa_switch *ds, int port, -+ struct phylink_link_state *state) -+{ -+#ifdef notyet -+ struct mt7530_priv *priv = ds->priv; -+ -+ if (state->interface == PHY_INTERFACE_MODE_SGMII) -+ return mt7531_sgmii_pcs_get_state_an(priv, port, state); -+#else -+ return mt7530_phylink_mac_link_state(ds, port, state); -+#endif -+ -+ return -EOPNOTSUPP; -+} -+ - static int - mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) -@@ -1708,13 +2568,14 @@ static const struct dsa_switch_ops mt753 - .port_vlan_prepare = mt7530_port_vlan_prepare, - .port_vlan_add = mt7530_port_vlan_add, - .port_vlan_del = mt7530_port_vlan_del, -- .port_mirror_add = mt7530_port_mirror_add, -- .port_mirror_del = mt7530_port_mirror_del, -+ .port_mirror_add = mt753x_port_mirror_add, -+ .port_mirror_del = mt753x_port_mirror_del, - .phylink_validate = mt753x_phylink_validate, - .phylink_mac_link_state = mt753x_phylink_mac_link_state, - .phylink_mac_config = mt753x_phylink_mac_config, -- .phylink_mac_link_down = mt7530_phylink_mac_link_down, -- .phylink_mac_link_up = mt7530_phylink_mac_link_up, -+ .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, -+ .phylink_mac_link_down = mt753x_phylink_mac_link_down, -+ .phylink_mac_link_up = mt753x_phylink_mac_link_up, - .get_mac_eee = mt7530_get_mac_eee, - .set_mac_eee = mt7530_set_mac_eee, - }; -@@ -1742,11 +2603,26 @@ static const struct mt753x_info mt753x_t - .mac_port_get_state = mt7530_phylink_mac_link_state, - .mac_port_config = mt7530_mac_config, - }, -+ [ID_MT7531] = { -+ .id = ID_MT7531, -+ .sw_setup = mt7531_setup, -+ .phy_read = mt7531_ind_phy_read, -+ .phy_write = mt7531_ind_phy_write, -+ .pad_setup = mt7531_pad_setup, -+ .cpu_port_config = mt7531_cpu_port_config, -+ .phy_mode_supported = mt7531_phy_supported, -+ .mac_port_validate = mt7531_mac_port_validate, -+ .mac_port_get_state = mt7531_phylink_mac_link_state, -+ .mac_port_config = mt7531_mac_config, -+ .mac_pcs_an_restart = mt7531_sgmii_restart_an, -+ .mac_pcs_link_up = mt7531_sgmii_link_up_force, -+ }, - }; - - static const struct of_device_id mt7530_of_match[] = { - { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], }, - { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], }, -+ { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], }, - { /* sentinel */ }, - }; - MODULE_DEVICE_TABLE(of, mt7530_of_match); ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -14,6 +14,7 @@ - enum mt753x_id { - ID_MT7530 = 0, - ID_MT7621 = 1, -+ ID_MT7531 = 2, - }; - - #define NUM_TRGMII_CTRL 5 -@@ -41,6 +42,33 @@ enum mt753x_id { - #define MIRROR_PORT(x) ((x) & 0x7) - #define MIRROR_MASK 0x7 - -+/* Registers for CPU forward control */ -+#define MT7531_CFC 0x4 -+#define MT7531_MIRROR_EN BIT(19) -+#define MT7531_MIRROR_MASK (MIRROR_MASK << 16) -+#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK) -+#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) -+#define MT7531_CPU_PMAP_MASK GENMASK(7, 0) -+ -+#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \ -+ MT7531_CFC : MT7530_MFC) -+#define MT753X_MIRROR_EN(id) (((id) == ID_MT7531) ? \ -+ MT7531_MIRROR_EN : MIRROR_EN) -+#define MT753X_MIRROR_MASK(id) (((id) == ID_MT7531) ? \ -+ MT7531_MIRROR_MASK : MIRROR_MASK) -+ -+/* Registers for BPDU and PAE frame control*/ -+#define MT753X_BPC 0x24 -+#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0) -+ -+enum mt753x_bpdu_port_fw { -+ MT753X_BPDU_FOLLOW_MFC, -+ MT753X_BPDU_CPU_EXCLUDE = 4, -+ MT753X_BPDU_CPU_INCLUDE = 5, -+ MT753X_BPDU_CPU_ONLY = 6, -+ MT753X_BPDU_DROP = 7, -+}; -+ - /* Registers for address table access */ - #define MT7530_ATA1 0x74 - #define STATIC_EMP 0 -@@ -222,10 +250,30 @@ enum mt7530_vlan_port_attr { - #define PMCR_FORCE_LNK BIT(0) - #define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \ - PMCR_FORCE_SPEED_1000) -+#define MT7531_FORCE_LNK BIT(31) -+#define MT7531_FORCE_SPD BIT(30) -+#define MT7531_FORCE_DPX BIT(29) -+#define MT7531_FORCE_RX_FC BIT(28) -+#define MT7531_FORCE_TX_FC BIT(27) -+#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \ -+ MT7531_FORCE_SPD | \ -+ MT7531_FORCE_DPX | \ -+ MT7531_FORCE_RX_FC | \ -+ MT7531_FORCE_TX_FC) -+#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \ -+ MT7531_FORCE_MODE : \ -+ PMCR_FORCE_MODE) - #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \ - PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ - PMCR_FORCE_FDX | PMCR_FORCE_LNK) -+#define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \ -+ PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ -+ PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ -+ PMCR_TX_EN | PMCR_RX_EN | \ -+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ -+ PMCR_FORCE_SPEED_1000 | \ -+ PMCR_FORCE_FDX | PMCR_FORCE_LNK) - - #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) - #define PMSR_EEE1G BIT(7) -@@ -245,6 +293,10 @@ enum mt7530_vlan_port_attr { - #define LPI_THRESH(x) ((x & 0xFFF) << 4) - #define LPI_MODE_EN BIT(0) - -+/* Register for port debug count */ -+#define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100) -+#define MT7531_DIS_CLR BIT(31) -+ - /* Register for MIB */ - #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) - #define MT7530_MIB_CCR 0x4fe0 -@@ -262,12 +314,118 @@ enum mt7530_vlan_port_attr { - CCR_RX_OCT_CNT_BAD | \ - CCR_TX_OCT_CNT_GOOD | \ - CCR_TX_OCT_CNT_BAD) -+ -+/* MT7531 SGMII register group */ -+#define MT7531_SGMII_REG_BASE 0x5000 -+#define MT7531_SGMII_REG(p, r) (MT7531_SGMII_REG_BASE + \ -+ ((p) - 5) * 0x1000 + (r)) -+ -+/* Register forSGMII PCS_CONTROL_1 */ -+#define MT7531_PCS_CONTROL_1(p) MT7531_SGMII_REG(p, 0x00) -+#define MT7531_SGMII_LINK_STATUS BIT(18) -+#define MT7531_SGMII_AN_ENABLE BIT(12) -+#define MT7531_SGMII_AN_RESTART BIT(9) -+ -+/* Register for SGMII PCS_SPPED_ABILITY */ -+#define MT7531_PCS_SPEED_ABILITY(p) MT7531_SGMII_REG(p, 0x08) -+#define MT7531_SGMII_TX_CONFIG_MASK GENMASK(15, 0) -+#define MT7531_SGMII_TX_CONFIG BIT(0) -+ -+/* Register for SGMII_MODE */ -+#define MT7531_SGMII_MODE(p) MT7531_SGMII_REG(p, 0x20) -+#define MT7531_SGMII_REMOTE_FAULT_DIS BIT(8) -+#define MT7531_SGMII_IF_MODE_MASK GENMASK(5, 1) -+#define MT7531_SGMII_FORCE_DUPLEX BIT(4) -+#define MT7531_SGMII_FORCE_SPEED_MASK GENMASK(3, 2) -+#define MT7531_SGMII_FORCE_SPEED_1000 BIT(3) -+#define MT7531_SGMII_FORCE_SPEED_100 BIT(2) -+#define MT7531_SGMII_FORCE_SPEED_10 0 -+#define MT7531_SGMII_SPEED_DUPLEX_AN BIT(1) -+ -+enum mt7531_sgmii_force_duplex { -+ MT7531_SGMII_FORCE_FULL_DUPLEX = 0, -+ MT7531_SGMII_FORCE_HALF_DUPLEX = 0x10, -+}; -+ -+/* Fields of QPHY_PWR_STATE_CTRL */ -+#define MT7531_QPHY_PWR_STATE_CTRL(p) MT7531_SGMII_REG(p, 0xe8) -+#define MT7531_SGMII_PHYA_PWD BIT(4) -+ -+/* Values of SGMII SPEED */ -+#define MT7531_PHYA_CTRL_SIGNAL3(p) MT7531_SGMII_REG(p, 0x128) -+#define MT7531_RG_TPHY_SPEED_MASK (BIT(2) | BIT(3)) -+#define MT7531_RG_TPHY_SPEED_1_25G 0x0 -+#define MT7531_RG_TPHY_SPEED_3_125G BIT(2) -+ - /* Register for system reset */ - #define MT7530_SYS_CTRL 0x7000 - #define SYS_CTRL_PHY_RST BIT(2) - #define SYS_CTRL_SW_RST BIT(1) - #define SYS_CTRL_REG_RST BIT(0) - -+/* Register for PHY Indirect Access Control */ -+#define MT7531_PHY_IAC 0x701C -+#define MT7531_PHY_ACS_ST BIT(31) -+#define MT7531_MDIO_REG_ADDR_MASK (0x1f << 25) -+#define MT7531_MDIO_PHY_ADDR_MASK (0x1f << 20) -+#define MT7531_MDIO_CMD_MASK (0x3 << 18) -+#define MT7531_MDIO_ST_MASK (0x3 << 16) -+#define MT7531_MDIO_RW_DATA_MASK (0xffff) -+#define MT7531_MDIO_REG_ADDR(x) (((x) & 0x1f) << 25) -+#define MT7531_MDIO_DEV_ADDR(x) (((x) & 0x1f) << 25) -+#define MT7531_MDIO_PHY_ADDR(x) (((x) & 0x1f) << 20) -+#define MT7531_MDIO_CMD(x) (((x) & 0x3) << 18) -+#define MT7531_MDIO_ST(x) (((x) & 0x3) << 16) -+ -+enum mt7531_phy_iac_cmd { -+ MT7531_MDIO_ADDR = 0, -+ MT7531_MDIO_WRITE = 1, -+ MT7531_MDIO_READ = 2, -+ MT7531_MDIO_READ_CL45 = 3, -+}; -+ -+/* MDIO_ST: MDIO start field */ -+enum mt7531_mdio_st { -+ MT7531_MDIO_ST_CL45 = 0, -+ MT7531_MDIO_ST_CL22 = 1, -+}; -+ -+#define MT7531_MDIO_CL22_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \ -+ MT7531_MDIO_CMD(MT7531_MDIO_READ)) -+#define MT7531_MDIO_CL22_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \ -+ MT7531_MDIO_CMD(MT7531_MDIO_WRITE)) -+#define MT7531_MDIO_CL45_ADDR (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ -+ MT7531_MDIO_CMD(MT7531_MDIO_ADDR)) -+#define MT7531_MDIO_CL45_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ -+ MT7531_MDIO_CMD(MT7531_MDIO_READ)) -+#define MT7531_MDIO_CL45_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \ -+ MT7531_MDIO_CMD(MT7531_MDIO_WRITE)) -+ -+/* Register for RGMII clock phase */ -+#define MT7531_CLKGEN_CTRL 0x7500 -+#define CLK_SKEW_OUT(x) (((x) & 0x3) << 8) -+#define CLK_SKEW_OUT_MASK GENMASK(9, 8) -+#define CLK_SKEW_IN(x) (((x) & 0x3) << 6) -+#define CLK_SKEW_IN_MASK GENMASK(7, 6) -+#define RXCLK_NO_DELAY BIT(5) -+#define TXCLK_NO_REVERSE BIT(4) -+#define GP_MODE(x) (((x) & 0x3) << 1) -+#define GP_MODE_MASK GENMASK(2, 1) -+#define GP_CLK_EN BIT(0) -+ -+enum mt7531_gp_mode { -+ MT7531_GP_MODE_RGMII = 0, -+ MT7531_GP_MODE_MII = 1, -+ MT7531_GP_MODE_REV_MII = 2 -+}; -+ -+enum mt7531_clk_skew { -+ MT7531_CLK_SKEW_NO_CHG = 0, -+ MT7531_CLK_SKEW_DLY_100PPS = 1, -+ MT7531_CLK_SKEW_DLY_200PPS = 2, -+ MT7531_CLK_SKEW_REVERSE = 3, -+}; -+ - /* Register for hw trap status */ - #define MT7530_HWTRAP 0x7800 - #define HWTRAP_XTAL_MASK (BIT(10) | BIT(9)) -@@ -275,6 +433,16 @@ enum mt7530_vlan_port_attr { - #define HWTRAP_XTAL_40MHZ (BIT(10)) - #define HWTRAP_XTAL_20MHZ (BIT(9)) - -+#define MT7531_HWTRAP 0x7800 -+#define HWTRAP_XTAL_FSEL_MASK BIT(7) -+#define HWTRAP_XTAL_FSEL_25MHZ BIT(7) -+#define HWTRAP_XTAL_FSEL_40MHZ 0 -+/* Unique fields of (M)HWSTRAP for MT7531 */ -+#define XTAL_FSEL_S 7 -+#define XTAL_FSEL_M BIT(7) -+#define PHY_EN BIT(6) -+#define CHG_STRAP BIT(8) -+ - /* Register for hw trap modification */ - #define MT7530_MHWTRAP 0x7804 - #define MHWTRAP_PHY0_SEL BIT(20) -@@ -289,14 +457,37 @@ enum mt7530_vlan_port_attr { - #define MT7530_TOP_SIG_CTRL 0x7808 - #define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16)) - -+#define MT7531_TOP_SIG_SR 0x780c -+#define PAD_DUAL_SGMII_EN BIT(1) -+#define PAD_MCM_SMI_EN BIT(0) -+ - #define MT7530_IO_DRV_CR 0x7810 - #define P5_IO_CLK_DRV(x) ((x) & 0x3) - #define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4) - -+#define MT7531_CHIP_REV 0x781C -+ -+#define MT7531_PLLGP_EN 0x7820 -+#define EN_COREPLL BIT(2) -+#define SW_CLKSW BIT(1) -+#define SW_PLLGP BIT(0) -+ - #define MT7530_P6ECR 0x7830 - #define P6_INTF_MODE_MASK 0x3 - #define P6_INTF_MODE(x) ((x) & 0x3) - -+#define MT7531_PLLGP_CR0 0x78a8 -+#define RG_COREPLL_EN BIT(22) -+#define RG_COREPLL_POSDIV_S 23 -+#define RG_COREPLL_POSDIV_M 0x3800000 -+#define RG_COREPLL_SDM_PCW_S 1 -+#define RG_COREPLL_SDM_PCW_M 0x3ffffe -+#define RG_COREPLL_SDM_PCW_CHG BIT(0) -+ -+/* Registers for RGMII and SGMII PLL clock */ -+#define MT7531_ANA_PLLGP_CR2 0x78b0 -+#define MT7531_ANA_PLLGP_CR5 0x78bc -+ - /* Registers for TRGMII on the both side */ - #define MT7530_TRGMII_RCK_CTRL 0x7a00 - #define RX_RST BIT(31) -@@ -335,10 +526,25 @@ enum mt7530_vlan_port_attr { - #define MT7530_P5RGMIITXCR 0x7b04 - #define CSR_RGMII_TXC_CFG(x) ((x) & 0x1f) - -+/* Registers for GPIO mode */ -+#define MT7531_GPIO_MODE0 0x7c0c -+#define MT7531_GPIO0_MASK GENMASK(3, 0) -+#define MT7531_GPIO0_INTERRUPT 1 -+ -+#define MT7531_GPIO_MODE1 0x7c10 -+#define MT7531_GPIO11_RG_RXD2_MASK GENMASK(15, 12) -+#define MT7531_EXT_P_MDC_11 (2 << 12) -+#define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16) -+#define MT7531_EXT_P_MDIO_12 (2 << 16) -+ - #define MT7530_CREV 0x7ffc - #define CHIP_NAME_SHIFT 16 - #define MT7530_ID 0x7530 - -+#define MT7531_CREV 0x781C -+#define CHIP_REV_M 0x0f -+#define MT7531_ID 0x7531 -+ - /* Registers for core PLL access through mmd indirect */ - #define CORE_PLL_GROUP2 0x401 - #define RG_SYSPLL_EN_NORMAL BIT(15) -@@ -355,6 +561,10 @@ enum mt7530_vlan_port_attr { - #define RG_SYSPLL_DDSFBK_EN BIT(12) - #define RG_SYSPLL_BIAS_EN BIT(11) - #define RG_SYSPLL_BIAS_LPF_EN BIT(10) -+#define MT7531_PHY_PLL_OFF BIT(5) -+#define MT7531_PHY_PLL_BYPASS_MODE BIT(4) -+ -+#define MT753X_CTRL_PHY_ADDR 0 - - #define CORE_PLL_GROUP5 0x404 - #define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff) -@@ -433,6 +643,7 @@ enum p5_interface_select { - P5_INTF_SEL_PHY_P0, - P5_INTF_SEL_PHY_P4, - P5_INTF_SEL_GMAC5, -+ P5_INTF_SEL_GMAC5_SGMII, - }; - - static const char *p5_intf_modes(unsigned int p5_interface) -@@ -446,6 +657,8 @@ static const char *p5_intf_modes(unsigne - return "PHY P4"; - case P5_INTF_SEL_GMAC5: - return "GMAC5"; -+ case P5_INTF_SEL_GMAC5_SGMII: -+ return "GMAC5_SGMII"; - default: - return "unknown"; - } -@@ -466,6 +679,10 @@ static const char *p5_intf_modes(unsigne - * MAC port - * @mac_port_config: Holding the way setting up the PHY attribute to a - * certain MAC port -+ * @mac_pcs_an_restart Holding the way restarting PCS autonegotiation for a -+ * certain MAC port -+ * @mac_pcs_link_up: Holding the way setting up the PHY attribute to the pcs -+ * of the certain MAC port - */ - struct mt753x_info { - enum mt753x_id id; -@@ -474,6 +691,7 @@ struct mt753x_info { - int (*phy_read)(struct dsa_switch *ds, int port, int regnum); - int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val); - int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); -+ int (*cpu_port_config)(struct dsa_switch *ds, int port); - bool (*phy_mode_supported)(struct dsa_switch *ds, int port, - const struct phylink_link_state *state); - void (*mac_port_validate)(struct dsa_switch *ds, int port, -@@ -483,6 +701,10 @@ struct mt753x_info { - int (*mac_port_config)(struct dsa_switch *ds, int port, - unsigned int mode, - phy_interface_t interface); -+ void (*mac_pcs_an_restart)(struct dsa_switch *ds, int port); -+ void (*mac_pcs_link_up)(struct dsa_switch *ds, int port, -+ unsigned int mode, phy_interface_t interface, -+ int speed, int duplex); - }; - - /* struct mt7530_priv - This is the main data structure for holding the state diff --git a/target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch b/target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch deleted file mode 100644 index 8c3fe52089..0000000000 --- a/target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch +++ /dev/null @@ -1,71 +0,0 @@ -From: Landen Chao -Subject: [PATCH net-next 6/6] arm64: dts: mt7622: add mt7531 dsa to - bananapi-bpi-r64 board -Date: Tue, 10 Dec 2019 16:14:42 +0800 - -Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support. - -Signed-off-by: Landen Chao ---- - .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++++++++++++++++++ - 1 file changed, 50 insertions(+) - ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -150,6 +150,56 @@ - mdio: mdio-bus { - #address-cells = <1>; - #size-cells = <0>; -+ -+ switch@0 { -+ compatible = "mediatek,mt7531"; -+ reg = <0>; -+ reset-gpios = <&pio 54 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "wan"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan0"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan1"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan2"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan3"; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ phy-mode = "2500base-x"; -+ -+ fixed-link { -+ speed = <2500>; -+ full-duplex; -+ pause; -+ }; -+ }; -+ }; -+ }; -+ - }; - }; - diff --git a/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch deleted file mode 100644 index 872b2bad45..0000000000 --- a/target/linux/mediatek/patches-5.4/0900-bt-mtk-serial-fix.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/drivers/tty/serial/8250/8250.h -+++ b/drivers/tty/serial/8250/8250.h -@@ -82,6 +82,7 @@ struct serial8250_config { - #define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks: - * STOP PARITY EPAR SPAR WLEN5 WLEN6 - */ -+#define UART_CAP_NMOD (1 << 18) /* UART doesn't do termios */ - - #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ - #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ ---- a/drivers/tty/serial/8250/8250_port.c -+++ b/drivers/tty/serial/8250/8250_port.c -@@ -290,7 +290,7 @@ static const struct serial8250_config ua - .tx_loadsz = 16, - .fcr = UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, -- .flags = UART_CAP_FIFO, -+ .flags = UART_CAP_FIFO | UART_CAP_NMOD, - }, - [PORT_NPCM] = { - .name = "Nuvoton 16550", -@@ -2597,6 +2597,11 @@ serial8250_do_set_termios(struct uart_po - unsigned long flags; - unsigned int baud, quot, frac = 0; - -+ if (up->capabilities & UART_CAP_NMOD) { -+ termios->c_cflag = 0; -+ return; -+ } -+ - if (up->capabilities & UART_CAP_MINI) { - termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR); - if ((termios->c_cflag & CSIZE) == CS5 || diff --git a/target/linux/mediatek/patches-5.4/0990-gsw-rtl8367s-mt7622-support.patch b/target/linux/mediatek/patches-5.4/0990-gsw-rtl8367s-mt7622-support.patch deleted file mode 100644 index a3d49e903e..0000000000 --- a/target/linux/mediatek/patches-5.4/0990-gsw-rtl8367s-mt7622-support.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -42,6 +42,12 @@ config MDIO_BCM_IPROC - This module provides a driver for the MDIO busses found in the - Broadcom iProc SoC's. - -+config RTL8367S_GSW -+ tristate "rtl8367 Gigabit Switch support for mt7622" -+ depends on NET_VENDOR_MEDIATEK -+ help -+ This driver supports rtl8367s in mt7622 -+ - config MDIO_BCM_UNIMAC - tristate "Broadcom UniMAC MDIO bus controller" - depends on HAS_IOMEM ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -110,4 +110,5 @@ obj-$(CONFIG_TERANETICS_PHY) += teraneti - obj-$(CONFIG_VITESSE_PHY) += vitesse.o - obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o - obj-$(CONFIG_MT753X_GSW) += mtk/mt753x/ -+obj-$(CONFIG_RTL8367S_GSW) += rtk/ - diff --git a/target/linux/mediatek/patches-5.4/0991-dt-bindings-PCI-Mediatek-Update-PCIe-binding.patch b/target/linux/mediatek/patches-5.4/0991-dt-bindings-PCI-Mediatek-Update-PCIe-binding.patch deleted file mode 100644 index 02e4c130ea..0000000000 --- a/target/linux/mediatek/patches-5.4/0991-dt-bindings-PCI-Mediatek-Update-PCIe-binding.patch +++ /dev/null @@ -1,415 +0,0 @@ -From patchwork Thu May 28 06:16:45 2020 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Chuanjia Liu -X-Patchwork-Id: 11574793 -Return-Path: - -Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org - [172.30.200.123]) - by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 391201392 - for ; - Thu, 28 May 2020 06:20:27 +0000 (UTC) -Received: from bombadil.infradead.org (bombadil.infradead.org - [198.137.202.133]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by mail.kernel.org (Postfix) with ESMTPS id 104F620657 - for ; - Thu, 28 May 2020 06:20:27 +0000 (UTC) -Authentication-Results: mail.kernel.org; - dkim=pass (2048-bit key) header.d=lists.infradead.org - header.i=@lists.infradead.org header.b="raZHaWxs"; - dkim=fail reason="signature verification failed" (1024-bit key) - header.d=mediatek.com header.i=@mediatek.com header.b="YztrByG/" -DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 104F620657 -Authentication-Results: mail.kernel.org; - dmarc=fail (p=none dis=none) header.from=mediatek.com -Authentication-Results: mail.kernel.org; - spf=none - smtp.mailfrom=linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=lists.infradead.org; s=bombadil.20170209; h=Sender: - Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: - List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: - Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: - Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: - List-Owner; bh=aVtKU+Ey8KEM97+S66fz9ZMo+H8BP570jhAAvaRsNWc=; b=raZHaWxsfCxsrd - Byn/w1oLN/J82ApnNdBBXixq9Qj0uXIU2tBVqkiQ9lG6QDk7uguxQSJLeTqrsI/uxQmCI/PGQtZdP - sH0oboi2sbQSqJ/1ud4uL2pPaiLRJCxINF5oWjoZMsjn/b2fWvn52P6vTr/dxDTaabiVhY0HL0J+X - 7YGc1aYtO76HZHE2ke3puR42QkI8hE9E2cEhiLWeuUiLdUBegNM5MdYftu4nJTcCXnAeJjp/wIpYG - 7X737N9cmanDf6Bxr2bNPgaYzH+m7JK6eGxuAvWo0+PE9OX7MLrXY3KjixcjD/b0he0mfEM++gBAq - KBYKl5wh1mnlR2WIWXew==; -Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) - by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeBtx-0005JC-DJ; Thu, 28 May 2020 06:20:25 +0000 -Received: from mailgw01.mediatek.com ([216.200.240.184]) - by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeBtW-0002f2-75; Thu, 28 May 2020 06:20:01 +0000 -X-UUID: d5cb6d96c2a5421796c2f8a284ff3670-20200527 -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=mediatek.com; - s=dk; - h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; - bh=EqjC+5cHgv6eykN7FPf2mtwK9UivJ3XSCE0jEvb8h+8=; - b=YztrByG/Ia304l9KDPBwoHFYkFCN6qBXPqwZgg56CA9VitadAg2+K1VgfEU+oHqsqcsGAMdZTRMQh17tpm4bJParw6MMzAQ28te2TcxvQMV8PZMkerJdZyyYblI7ybauPWuofAQgQMtuwSKVii8eTRJbf99OZ9vDGJP3zo2j1wU=; -X-UUID: d5cb6d96c2a5421796c2f8a284ff3670-20200527 -Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by - mailgw01.mediatek.com - (envelope-from ) - (musrelay.mediatek.com ESMTP with TLS) - with ESMTP id 681958707; Wed, 27 May 2020 22:20:16 -0800 -Received: from MTKMBS07N2.mediatek.inc (172.21.101.141) by - MTKMBS62N1.mediatek.inc (172.29.193.41) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Wed, 27 May 2020 23:18:52 -0700 -Received: from mtkcas07.mediatek.inc (172.21.101.84) by - mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Thu, 28 May 2020 14:18:49 +0800 -Received: from localhost.localdomain (10.17.3.153) by mtkcas07.mediatek.inc - (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend - Transport; Thu, 28 May 2020 14:18:47 +0800 -From: -To: , , -Subject: [PATCH v2 1/4] dt-bindings: PCI: Mediatek: Update PCIe binding -Date: Thu, 28 May 2020 14:16:45 +0800 -Message-ID: <20200528061648.32078-2-chuanjia.liu@mediatek.com> -X-Mailer: git-send-email 2.18.0 -In-Reply-To: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -References: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -MIME-Version: 1.0 -X-MTK: N -X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 -X-CRM114-CacheID: sfid-20200527_231958_261064_608CC03E -X-CRM114-Status: GOOD ( 13.95 ) -X-Spam-Score: -0.2 (/) -X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: - Content analysis details: (-0.2 points) - pts rule name description - ---- ---------------------- - -------------------------------------------------- - -0.0 SPF_PASS SPF: sender matches SPF record - 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record - 0.0 MIME_BASE64_TEXT RAW: Message text disguised using base64 - encoding - -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from - author's domain - 0.1 DKIM_SIGNED Message has a DKIM or DK signature, - not necessarily - valid - -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature - -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from - envelope-from domain - 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay - lines -X-BeenThere: linux-mediatek@lists.infradead.org -X-Mailman-Version: 2.1.29 -Precedence: list -List-Id: -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Cc: devicetree@vger.kernel.org, lorenzo.pieralisi@arm.com, - srv_heupstream@mediatek.com, "chuanjia.liu" , - linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, - jianjun.wang@mediatek.com, linux-mediatek@lists.infradead.org, - yong.wu@mediatek.com, bhelgaas@google.com, - linux-arm-kernel@lists.infradead.org, amurray@thegoodpenguin.co.uk -Sender: "Linux-mediatek" -Errors-To: - linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org - -From: "chuanjia.liu" - -There are two independent PCIe controllers in MT2712/MT7622 platform, -and each of them should contain an independent MSI domain. - -In current architecture, MSI domain will be inherited from the root -bridge, and all of the devices will share the same MSI domain. -Hence that, the PCIe devices will not work properly if the irq number -which required is more than 32. - -Split the PCIe node for MT2712/MT7622 platform to fix MSI issue and -comply with the hardware design. - -Signed-off-by: chuanjia.liu ---- - .../bindings/pci/mediatek-pcie-cfg.yaml | 38 +++++ - .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++------- - 2 files changed, 129 insertions(+), 53 deletions(-) - create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml -@@ -0,0 +1,38 @@ -+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: Mediatek PCIECFG controller -+ -+maintainers: -+ - Chuanjia Liu -+ - Jianjun Wang -+ -+description: | -+ The MediaTek PCIECFG controller controls some feature about -+ LTSSM, ASPM and so on. -+ -+properties: -+ compatible: -+ items: -+ - enum: -+ - mediatek,mt7622-pciecfg -+ - mediatek,mt7629-pciecfg -+ - const: syscon -+ -+ reg: -+ maxItems: 1 -+ -+required: -+ - compatible -+ - reg -+ -+examples: -+ - | -+ pciecfg: pciecfg@1a140000 { -+ compatible = "mediatek,mt7622-pciecfg", "syscon"; -+ reg = <0 0x1a140000 0 0x1000>; -+ }; -+... ---- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt -+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt -@@ -8,7 +8,7 @@ Required properties: - "mediatek,mt7623-pcie" - "mediatek,mt7629-pcie" - - device_type: Must be "pci" --- reg: Base addresses and lengths of the PCIe subsys and root ports. -+- reg: Base addresses and lengths of the root ports. - - reg-names: Names of the above areas to use during resource lookup. - - #address-cells: Address representation for root ports (must be 3) - - #size-cells: Size representation for root ports (must be 2) -@@ -19,10 +19,10 @@ Required properties: - - sys_ckN :transaction layer and data link layer clock - Required entries for MT2701/MT7623: - - free_ck :for reference clock of PCIe subsys -- Required entries for MT2712/MT7622: -+ Required entries for MT2712/MT7622/MT7629: - - ahb_ckN :AHB slave interface operating clock for CSR access and RC - initiated MMIO access -- Required entries for MT7622: -+ Required entries for MT7622/MT7629: - - axi_ckN :application layer MMIO channel operating clock - - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when - pcie_mac_ck/pcie_pipe_ck is turned off -@@ -47,10 +47,13 @@ Required properties for MT7623/MT2701: - - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the - number of root ports. - --Required properties for MT2712/MT7622: -+Required properties for MT2712/MT7622/MT7629: - -interrupts: A list of interrupt outputs of the controller, must have one - entry for each PCIe port - -+Required properties for MT7622/MT7629: -+- mediatek,pcie-subsys: Should be a phandle of the pciecfg node. -+ - In addition, the device tree node must have sub-nodes describing each - PCIe port interface, having the following mandatory properties: - -@@ -143,56 +146,73 @@ Examples for MT7623: - - Examples for MT2712: - -- pcie: pcie@11700000 { -+ pcie1: pcie@112ff000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; -- reg = <0 0x11700000 0 0x1000>, -- <0 0x112ff000 0 0x1000>; -- reg-names = "port0", "port1"; -+ reg = <0 0x112ff000 0 0x1000>; -+ reg-names = "port1"; - #address-cells = <3>; - #size-cells = <2>; -- interrupts = , -- ; -- clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, -- <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, -- <&pericfg CLK_PERI_PCIE0>, -+ interrupts = ; -+ interrupt-names = "pcie_irq"; -+ clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE1>; -- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; -- phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; -- phy-names = "pcie-phy0", "pcie-phy1"; -+ clock-names = "sys_ck1", "ahb_ck1"; -+ phys = <&u3port1 PHY_TYPE_PCIE>; -+ phy-names = "pcie-phy1"; - bus-range = <0x00 0xff>; -- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; -+ ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; -+ status = "disabled"; - -- pcie0: pcie@0,0 { -- reg = <0x0000 0 0 0 0>; -+ slot1: pcie@1,0 { -+ reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; -- interrupt-map = <0 0 0 1 &pcie_intc0 0>, -- <0 0 0 2 &pcie_intc0 1>, -- <0 0 0 3 &pcie_intc0 2>, -- <0 0 0 4 &pcie_intc0 3>; -- pcie_intc0: interrupt-controller { -+ interrupt-map = <0 0 0 1 &pcie_intc1 0>, -+ <0 0 0 2 &pcie_intc1 1>, -+ <0 0 0 3 &pcie_intc1 2>, -+ <0 0 0 4 &pcie_intc1 3>; -+ pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; -+ }; - -- pcie1: pcie@1,0 { -- reg = <0x0800 0 0 0 0>; -+ pcie0: pcie@11700000 { -+ compatible = "mediatek,mt2712-pcie"; -+ device_type = "pci"; -+ reg = <0 0x11700000 0 0x1000>; -+ reg-names = "port0"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; -+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, -+ <&pericfg CLK_PERI_PCIE0>; -+ clock-names = "sys_ck0", "ahb_ck0"; -+ phys = <&u3port0 PHY_TYPE_PCIE>; -+ phy-names = "pcie-phy0"; -+ bus-range = <0x00 0xff>; -+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; -+ status = "disabled"; -+ -+ slot0: pcie@0,0 { -+ reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; -- interrupt-map = <0 0 0 1 &pcie_intc1 0>, -- <0 0 0 2 &pcie_intc1 1>, -- <0 0 0 3 &pcie_intc1 2>, -- <0 0 0 4 &pcie_intc1 3>; -- pcie_intc1: interrupt-controller { -+ interrupt-map = <0 0 0 1 &pcie_intc0 0>, -+ <0 0 0 2 &pcie_intc0 1>, -+ <0 0 0 3 &pcie_intc0 2>, -+ <0 0 0 4 &pcie_intc0 3>; -+ pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; -@@ -202,39 +222,31 @@ Examples for MT2712: - - Examples for MT7622: - -- pcie: pcie@1a140000 { -+ pcie0: pcie@1a143000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; -- reg = <0 0x1a140000 0 0x1000>, -- <0 0x1a143000 0 0x1000>, -- <0 0x1a145000 0 0x1000>; -- reg-names = "subsys", "port0", "port1"; -+ reg = <0 0x1a143000 0 0x1000>; -+ reg-names = "port0"; -+ mediatek,pcie-cfg = <&pciecfg>; - #address-cells = <3>; - #size-cells = <2>; -- interrupts = , -- ; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, -- <&pciesys CLK_PCIE_P1_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, -- <&pciesys CLK_PCIE_P1_AHB_EN>, - <&pciesys CLK_PCIE_P0_AUX_EN>, -- <&pciesys CLK_PCIE_P1_AUX_EN>, - <&pciesys CLK_PCIE_P0_AXI_EN>, -- <&pciesys CLK_PCIE_P1_AXI_EN>, - <&pciesys CLK_PCIE_P0_OBFF_EN>, -- <&pciesys CLK_PCIE_P1_OBFF_EN>, -- <&pciesys CLK_PCIE_P0_PIPE_EN>, -- <&pciesys CLK_PCIE_P1_PIPE_EN>; -- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", -- "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", -- "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; -- phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; -- phy-names = "pcie-phy0", "pcie-phy1"; -+ <&pciesys CLK_PCIE_P0_PIPE_EN>; -+ clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", -+ "axi_ck0", "obff_ck0", "pipe_ck0"; -+ - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; -- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; -+ ranges = <0x82000000 0 0x20000000 0 0x20000000 0 0x8000000>; -+ status = "disabled"; - -- pcie0: pcie@0,0 { -+ slot0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; -@@ -251,8 +263,34 @@ Examples for MT7622: - #interrupt-cells = <1>; - }; - }; -+ }; -+ -+ pcie1: pcie@1a145000 { -+ compatible = "mediatek,mt7622-pcie"; -+ device_type = "pci"; -+ reg = <0 0x1a145000 0 0x1000>; -+ reg-names = "port1"; -+ mediatek,pcie-cfg = <&pciecfg>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; -+ clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, -+ /* designer has connect RC1 with p0_ahb clock */ -+ <&pciesys CLK_PCIE_P0_AHB_EN>, -+ <&pciesys CLK_PCIE_P1_AUX_EN>, -+ <&pciesys CLK_PCIE_P1_AXI_EN>, -+ <&pciesys CLK_PCIE_P1_OBFF_EN>, -+ <&pciesys CLK_PCIE_P1_PIPE_EN>; -+ clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", -+ "axi_ck1", "obff_ck1", "pipe_ck1"; -+ -+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; -+ bus-range = <0x00 0xff>; -+ ranges = <0x82000000 0 0x28000000 0 0x28000000 0 0x8000000>; -+ status = "disabled"; - -- pcie1: pcie@1,0 { -+ slot1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; diff --git a/target/linux/mediatek/patches-5.4/0992-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch b/target/linux/mediatek/patches-5.4/0992-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch deleted file mode 100644 index 3e4d44f59e..0000000000 --- a/target/linux/mediatek/patches-5.4/0992-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch +++ /dev/null @@ -1,217 +0,0 @@ -From patchwork Thu May 28 06:16:46 2020 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Chuanjia Liu -X-Patchwork-Id: 11574781 -Return-Path: - -Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org - [172.30.200.123]) - by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 0A99B60D - for ; - Thu, 28 May 2020 06:19:04 +0000 (UTC) -Received: from bombadil.infradead.org (bombadil.infradead.org - [198.137.202.133]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by mail.kernel.org (Postfix) with ESMTPS id DCC99208FE - for ; - Thu, 28 May 2020 06:19:03 +0000 (UTC) -Authentication-Results: mail.kernel.org; - dkim=pass (2048-bit key) header.d=lists.infradead.org - header.i=@lists.infradead.org header.b="SpOi0ueF"; - dkim=fail reason="signature verification failed" (1024-bit key) - header.d=mediatek.com header.i=@mediatek.com header.b="UGIBoIEG" -DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org DCC99208FE -Authentication-Results: mail.kernel.org; - dmarc=fail (p=none dis=none) header.from=mediatek.com -Authentication-Results: mail.kernel.org; - spf=none - smtp.mailfrom=linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=lists.infradead.org; s=bombadil.20170209; h=Sender: - Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: - List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: - Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: - Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: - List-Owner; bh=LIr5poLUT/UdH6/akh/pnICGGa3rUBkN+4FhE1DyOrU=; b=SpOi0ueFcoJ/ka - 4esa6cDd5oU4fp0z684ZVPaVvvhm/azSZBBMYinHaAW6EvzKcMNYIX9grP8eg/728lEPNTKVq0I8H - PQZ9KvD4uTu8Opo1hD8LsRSLr+YLpNKt3KPOY/4gpwQ97uU9rI5PwkuAxPBgR949Vh5EiG0Vaww1H - Ep+I5BFRn2LVVQZP1Z7U0A0VUcOTLJ4znoWRLEXxtM9/Wd4hwQsrEPQszeDFti/RbwGfJ5efOb5UL - fhwBzSxELEzAAgH7env/XD2sSSpVf2Qsn6WO8D3ZepMtWrRtARiaRKSNxSBQTg2SSHcjmBSJSzcX+ - w8wqWaUMs0crlBuZWS1g==; -Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) - by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeBsc-0001tI-88; Thu, 28 May 2020 06:19:02 +0000 -Received: from mailgw01.mediatek.com ([216.200.240.184]) - by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeBsZ-0001rp-6g; Thu, 28 May 2020 06:19:01 +0000 -X-UUID: beeaf5765357439c91eab1f67ca7ef43-20200527 -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=mediatek.com; - s=dk; - h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; - bh=+IjWjsF/DhknqZB+lLSZ50cyvxDap+8w4tvqhp8Dv68=; - b=UGIBoIEGJUuq5pEvYEad1HVGpiv6yma+94hva83D2gD8lYmihRWkpJxB2yn+dVtNm7ZXXoQBf+jvvULOmslJgs1HZTLJTnjpdvLmQqo42OXRXSVpTE49HdRkJZDAIWIAReBfOEkFgNxcIX3uedrtnww/NLJ2lagrYPG5ET4lI2E=; -X-UUID: beeaf5765357439c91eab1f67ca7ef43-20200527 -Received: from mtkcas68.mediatek.inc [(172.29.94.19)] by mailgw01.mediatek.com - (envelope-from ) - (musrelay.mediatek.com ESMTP with TLS) - with ESMTP id 603406343; Wed, 27 May 2020 22:19:17 -0800 -Received: from mtkmbs07n1.mediatek.inc (172.21.101.16) by - MTKMBS62DR.mediatek.inc (172.29.94.18) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Wed, 27 May 2020 23:18:47 -0700 -Received: from mtkcas07.mediatek.inc (172.21.101.84) by - mtkmbs07n1.mediatek.inc (172.21.101.16) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Thu, 28 May 2020 14:18:51 +0800 -Received: from localhost.localdomain (10.17.3.153) by mtkcas07.mediatek.inc - (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend - Transport; Thu, 28 May 2020 14:18:49 +0800 -From: -To: , , -Subject: [PATCH v2 2/4] PCI: mediatek: Use regmap to get shared pcie-cfg base -Date: Thu, 28 May 2020 14:16:46 +0800 -Message-ID: <20200528061648.32078-3-chuanjia.liu@mediatek.com> -X-Mailer: git-send-email 2.18.0 -In-Reply-To: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -References: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -MIME-Version: 1.0 -X-MTK: N -X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 -X-CRM114-CacheID: sfid-20200527_231859_251275_BED2B1E2 -X-CRM114-Status: GOOD ( 11.62 ) -X-Spam-Score: -0.2 (/) -X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: - Content analysis details: (-0.2 points) - pts rule name description - ---- ---------------------- - -------------------------------------------------- - -0.0 SPF_PASS SPF: sender matches SPF record - 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record - 0.0 MIME_BASE64_TEXT RAW: Message text disguised using base64 - encoding - -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from - author's domain - 0.1 DKIM_SIGNED Message has a DKIM or DK signature, - not necessarily - valid - -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature - -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from - envelope-from domain - 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay - lines -X-BeenThere: linux-mediatek@lists.infradead.org -X-Mailman-Version: 2.1.29 -Precedence: list -List-Id: -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Cc: devicetree@vger.kernel.org, lorenzo.pieralisi@arm.com, - srv_heupstream@mediatek.com, "chuanjia.liu" , - linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, - jianjun.wang@mediatek.com, linux-mediatek@lists.infradead.org, - yong.wu@mediatek.com, bhelgaas@google.com, - linux-arm-kernel@lists.infradead.org, amurray@thegoodpenguin.co.uk -Sender: "Linux-mediatek" -Errors-To: - linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org - -From: "chuanjia.liu" - -Use regmap to get shared pcie-cfg base and change -the method to get pcie irq. - -Signed-off-by: chuanjia.liu ---- - drivers/pci/controller/pcie-mediatek.c | 25 ++++++++++++++++++------- - 1 file changed, 18 insertions(+), 7 deletions(-) - ---- a/drivers/pci/controller/pcie-mediatek.c -+++ b/drivers/pci/controller/pcie-mediatek.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -23,6 +24,7 @@ - #include - #include - #include -+#include - #include - - #include "../pci.h" -@@ -205,6 +207,7 @@ struct mtk_pcie_port { - * struct mtk_pcie - PCIe host information - * @dev: pointer to PCIe device - * @base: IO mapped register base -+ * @cfg: IO mapped register map for PCIe config - * @free_ck: free-run reference clock - * @mem: non-prefetchable memory resource - * @ports: pointer to PCIe port information -@@ -214,6 +217,7 @@ struct mtk_pcie_port { - struct mtk_pcie { - struct device *dev; - void __iomem *base; -+ struct regmap *cfg; - struct clk *free_ck; - - struct resource mem; -@@ -651,7 +655,7 @@ static int mtk_pcie_setup_irq(struct mtk - return err; - } - -- port->irq = platform_get_irq(pdev, port->slot); -+ port->irq = platform_get_irq_byname(pdev, "pcie_irq"); - irq_set_chained_handler_and_data(port->irq, - mtk_pcie_intr_handler, port); - -@@ -666,12 +670,11 @@ static int mtk_pcie_startup_port_v2(stru - u32 val; - int err; - -- /* MT7622 platforms need to enable LTSSM and ASPM from PCIe subsys */ -- if (pcie->base) { -- val = readl(pcie->base + PCIE_SYS_CFG_V2); -- val |= PCIE_CSR_LTSSM_EN(port->slot) | -- PCIE_CSR_ASPM_L1_EN(port->slot); -- writel(val, pcie->base + PCIE_SYS_CFG_V2); -+ /* MT7622/MT7629 platforms need to enable LTSSM and ASPM. */ -+ if (pcie->cfg) { -+ val = PCIE_CSR_LTSSM_EN(port->slot) | -+ PCIE_CSR_ASPM_L1_EN(port->slot); -+ regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val); - } - - /* Assert all reset signals */ -@@ -977,6 +980,7 @@ static int mtk_pcie_subsys_powerup(struc - struct device *dev = pcie->dev; - struct platform_device *pdev = to_platform_device(dev); - struct resource *regs; -+ struct device_node *cfg_node; - int err; - - /* get shared registers, which are optional */ -@@ -989,6 +993,13 @@ static int mtk_pcie_subsys_powerup(struc - } - } - -+ cfg_node = of_parse_phandle(dev->of_node, "mediatek,pcie-cfg", 0); -+ if (cfg_node) { -+ pcie->cfg = syscon_node_to_regmap(cfg_node); -+ if (IS_ERR(pcie->cfg)) -+ return PTR_ERR(pcie->cfg); -+ } -+ - pcie->free_ck = devm_clk_get(dev, "free_ck"); - if (IS_ERR(pcie->free_ck)) { - if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER) diff --git a/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch b/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch deleted file mode 100644 index 3c5558b606..0000000000 --- a/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch +++ /dev/null @@ -1,417 +0,0 @@ -From patchwork Thu May 28 06:16:47 2020 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Chuanjia Liu -X-Patchwork-Id: 11574785 -Return-Path: - -Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org - [172.30.200.123]) - by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 933301391 - for ; - Thu, 28 May 2020 06:19:16 +0000 (UTC) -Received: from bombadil.infradead.org (bombadil.infradead.org - [198.137.202.133]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by mail.kernel.org (Postfix) with ESMTPS id D19F02078C - for ; - Thu, 28 May 2020 06:19:15 +0000 (UTC) -Authentication-Results: mail.kernel.org; - dkim=pass (2048-bit key) header.d=lists.infradead.org - header.i=@lists.infradead.org header.b="s8K7t7DF"; - dkim=fail reason="signature verification failed" (1024-bit key) - header.d=mediatek.com header.i=@mediatek.com header.b="RhX81Iqp" -DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org D19F02078C -Authentication-Results: mail.kernel.org; - dmarc=fail (p=none dis=none) header.from=mediatek.com -Authentication-Results: mail.kernel.org; - spf=none - smtp.mailfrom=linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=lists.infradead.org; s=bombadil.20170209; h=Sender: - Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: - List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: - Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: - Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: - List-Owner; bh=NHyHqNMcE7LW10MwduOJoKiWe8cv+XayY+L6WDZeSu0=; b=s8K7t7DFh1iQ5w - eGvuMRgXEQv/YWRuSZRyX8lx8R2H9IuawEIgkhO6lEo6xv0VdsRuj8SptfoWg5afCItMhih373M21 - 6sUy3tEiuKGgklfxLU0reLEkaATkKRGLJDY3eSSs1mvZDrydKuZLDTka+YDGaiESlOhqMr95Nm6YM - yK8O00qTwSRPJUILRsBv1e/Kz8NRCmYhs56snABJkKeJ51NRAkb20R6qGTEd6UyBlz3jTVYwluLgF - bdqzywDT6+BNg/Agh6Zd+v2PpO4cmwCpGm62+3UUyZkfi/aQ4qZ/AFAfSQI+3ZBAgsKMC1PGifOi/ - FgGxIvAUk6atBy7DAHuw==; -Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) - by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeBsn-00025C-EF; Thu, 28 May 2020 06:19:13 +0000 -Received: from mailgw01.mediatek.com ([216.200.240.184]) - by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeBsZ-0001s4-6j; Thu, 28 May 2020 06:19:01 +0000 -X-UUID: c6210e6371fa445db0ae40a8b8a7a0a1-20200527 -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=mediatek.com; - s=dk; - h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; - bh=X9AwTdbhpWmlWY4LjTm8KLq4Cca3YI9UnyCX3O0BAak=; - b=RhX81Iqp0mWhBDyMQMFSEtt23+DGAWoin1SrFGP1bzp6GEtu38b2pK5RJVBshJtuxi/a1uMXZjeDsHJn02VGdNA07FrzZ7jq6YYEL+8cJs2DnhySmNElZazXPv2vKu9TWygfilTT24h/u8V/eszuRuhkdoUKWol8LwDlPl9gskg=; -X-UUID: c6210e6371fa445db0ae40a8b8a7a0a1-20200527 -Received: from mtkcas68.mediatek.inc [(172.29.94.19)] by mailgw01.mediatek.com - (envelope-from ) - (musrelay.mediatek.com ESMTP with TLS) - with ESMTP id 7561992; Wed, 27 May 2020 22:19:17 -0800 -Received: from mtkmbs07n1.mediatek.inc (172.21.101.16) by - MTKMBS62DR.mediatek.inc (172.29.94.18) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Wed, 27 May 2020 23:18:47 -0700 -Received: from mtkcas07.mediatek.inc (172.21.101.84) by - mtkmbs07n1.mediatek.inc (172.21.101.16) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Thu, 28 May 2020 14:18:52 +0800 -Received: from localhost.localdomain (10.17.3.153) by mtkcas07.mediatek.inc - (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend - Transport; Thu, 28 May 2020 14:18:51 +0800 -From: -To: , , -Subject: [PATCH v2 3/4] arm64: dts: mediatek: Split PCIe node for - MT2712/MT7622 -Date: Thu, 28 May 2020 14:16:47 +0800 -Message-ID: <20200528061648.32078-4-chuanjia.liu@mediatek.com> -X-Mailer: git-send-email 2.18.0 -In-Reply-To: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -References: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -MIME-Version: 1.0 -X-MTK: N -X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 -X-CRM114-CacheID: sfid-20200527_231859_253529_B6751C5A -X-CRM114-Status: GOOD ( 12.20 ) -X-Spam-Score: -0.2 (/) -X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: - Content analysis details: (-0.2 points) - pts rule name description - ---- ---------------------- - -------------------------------------------------- - -0.0 SPF_PASS SPF: sender matches SPF record - 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record - 0.0 MIME_BASE64_TEXT RAW: Message text disguised using base64 - encoding - -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from - author's domain - 0.1 DKIM_SIGNED Message has a DKIM or DK signature, - not necessarily - valid - -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature - -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from - envelope-from domain - 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay - lines -X-BeenThere: linux-mediatek@lists.infradead.org -X-Mailman-Version: 2.1.29 -Precedence: list -List-Id: -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Cc: devicetree@vger.kernel.org, lorenzo.pieralisi@arm.com, - srv_heupstream@mediatek.com, "chuanjia.liu" , - linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, - jianjun.wang@mediatek.com, linux-mediatek@lists.infradead.org, - yong.wu@mediatek.com, bhelgaas@google.com, - linux-arm-kernel@lists.infradead.org, amurray@thegoodpenguin.co.uk -Sender: "Linux-mediatek" -Errors-To: - linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org - -From: "chuanjia.liu" - -There are two independent PCIe controllers in MT2712/MT7622 platform, -and each of them should contain an independent MSI domain. - -In current architecture, MSI domain will be inherited from the root -bridge, and all of the devices will share the same MSI domain. -Hence that, the PCIe devices will not work properly if the irq number -which required is more than 32. - -Split the PCIe node for MT2712/MT7622 platform to fix MSI issue and -comply with the hardware design. - -Signed-off-by: chuanjia.liu ---- - arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 75 +++++++++++-------- - .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 16 ++-- - arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 6 +- - arch/arm64/boot/dts/mediatek/mt7622.dtsi | 68 +++++++++++------ - 4 files changed, 96 insertions(+), 69 deletions(-) - ---- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi -@@ -791,60 +791,73 @@ - }; - }; - -- pcie: pcie@11700000 { -+ pcie1: pcie@112ff000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; -- reg = <0 0x11700000 0 0x1000>, -- <0 0x112ff000 0 0x1000>; -- reg-names = "port0", "port1"; -+ reg = <0 0x112ff000 0 0x1000>; -+ reg-names = "port1"; - #address-cells = <3>; - #size-cells = <2>; -- interrupts = , -- ; -- clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, -- <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, -- <&pericfg CLK_PERI_PCIE0>, -+ interrupts = ; -+ interrupt-names = "pcie_irq"; -+ clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE1>; -- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; -- phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>; -- phy-names = "pcie-phy0", "pcie-phy1"; -+ clock-names = "sys_ck1", "ahb_ck1"; -+ phys = <&u3port1 PHY_TYPE_PCIE>; -+ phy-names = "pcie-phy1"; - bus-range = <0x00 0xff>; -- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; -+ ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; -+ status = "disabled"; - -- pcie0: pcie@0,0 { -- device_type = "pci"; -- status = "disabled"; -- reg = <0x0000 0 0 0 0>; -+ slot1: pcie@1,0 { -+ reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; -- interrupt-map = <0 0 0 1 &pcie_intc0 0>, -- <0 0 0 2 &pcie_intc0 1>, -- <0 0 0 3 &pcie_intc0 2>, -- <0 0 0 4 &pcie_intc0 3>; -- pcie_intc0: interrupt-controller { -+ interrupt-map = <0 0 0 1 &pcie_intc1 0>, -+ <0 0 0 2 &pcie_intc1 1>, -+ <0 0 0 3 &pcie_intc1 2>, -+ <0 0 0 4 &pcie_intc1 3>; -+ pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; -+ }; - -- pcie1: pcie@1,0 { -- device_type = "pci"; -- status = "disabled"; -- reg = <0x0800 0 0 0 0>; -+ pcie0: pcie@11700000 { -+ compatible = "mediatek,mt2712-pcie"; -+ device_type = "pci"; -+ reg = <0 0x11700000 0 0x1000>; -+ reg-names = "port0"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; -+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, -+ <&pericfg CLK_PERI_PCIE0>; -+ clock-names = "sys_ck0", "ahb_ck0"; -+ phys = <&u3port0 PHY_TYPE_PCIE>; -+ phy-names = "pcie-phy0"; -+ bus-range = <0x00 0xff>; -+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; -+ status = "disabled"; -+ -+ slot0: pcie@0,0 { -+ reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; - interrupt-map-mask = <0 0 0 7>; -- interrupt-map = <0 0 0 1 &pcie_intc1 0>, -- <0 0 0 2 &pcie_intc1 1>, -- <0 0 0 3 &pcie_intc1 2>, -- <0 0 0 4 &pcie_intc1 3>; -- pcie_intc1: interrupt-controller { -+ interrupt-map = <0 0 0 1 &pcie_intc0 0>, -+ <0 0 0 2 &pcie_intc0 1>, -+ <0 0 0 3 &pcie_intc0 2>, -+ <0 0 0 4 &pcie_intc0 3>; -+ pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -294,18 +294,16 @@ - }; - }; - --&pcie { -+&pcie0 { - pinctrl-names = "default"; -- pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; -+ pinctrl-0 = <&pcie0_pins>; - status = "okay"; -+}; - -- pcie@0,0 { -- status = "okay"; -- }; -- -- pcie@1,0 { -- status = "okay"; -- }; -+&pcie1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie1_pins>; -+ status = "okay"; - }; - - &pio { ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -794,45 +794,41 @@ - #reset-cells = <1>; - }; - -- pcie: pcie@1a140000 { -+ pciecfg: pciecfg@1a140000 { -+ compatible = "mediatek,mt7622-pciecfg", "syscon"; -+ reg = <0 0x1a140000 0 0x1000>; -+ }; -+ -+ pcie0: pcie@1a143000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; -- reg = <0 0x1a140000 0 0x1000>, -- <0 0x1a143000 0 0x1000>, -- <0 0x1a145000 0 0x1000>; -- reg-names = "subsys", "port0", "port1"; -+ reg = <0 0x1a143000 0 0x1000>; -+ reg-names = "port0"; -+ mediatek,pcie-cfg = <&pciecfg>; - #address-cells = <3>; - #size-cells = <2>; -- interrupts = , -- ; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, -- <&pciesys CLK_PCIE_P1_MAC_EN>, -- <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P0_AUX_EN>, -- <&pciesys CLK_PCIE_P1_AUX_EN>, - <&pciesys CLK_PCIE_P0_AXI_EN>, -- <&pciesys CLK_PCIE_P1_AXI_EN>, - <&pciesys CLK_PCIE_P0_OBFF_EN>, -- <&pciesys CLK_PCIE_P1_OBFF_EN>, -- <&pciesys CLK_PCIE_P0_PIPE_EN>, -- <&pciesys CLK_PCIE_P1_PIPE_EN>; -- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", -- "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", -- "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; -+ <&pciesys CLK_PCIE_P0_PIPE_EN>; -+ clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", -+ "axi_ck0", "obff_ck0", "pipe_ck0"; -+ - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; -- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; -+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; - status = "disabled"; - -- pcie0: pcie@0,0 { -+ slot0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; -- status = "disabled"; -- - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, -@@ -844,15 +840,39 @@ - #interrupt-cells = <1>; - }; - }; -+ }; - -- pcie1: pcie@1,0 { -+ pcie1: pcie@1a145000 { -+ compatible = "mediatek,mt7622-pcie"; -+ device_type = "pci"; -+ reg = <0 0x1a145000 0 0x1000>; -+ reg-names = "port1"; -+ mediatek,pcie-cfg = <&pciecfg>; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; -+ clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, -+ /* designer has connect RC1 with p0_ahb clock */ -+ <&pciesys CLK_PCIE_P0_AHB_EN>, -+ <&pciesys CLK_PCIE_P1_AUX_EN>, -+ <&pciesys CLK_PCIE_P1_AXI_EN>, -+ <&pciesys CLK_PCIE_P1_OBFF_EN>, -+ <&pciesys CLK_PCIE_P1_PIPE_EN>; -+ clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", -+ "axi_ck1", "obff_ck1", "pipe_ck1"; -+ -+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; -+ bus-range = <0x00 0xff>; -+ ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; -+ status = "disabled"; -+ -+ slot1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; -- status = "disabled"; -- - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -254,18 +254,16 @@ - }; - }; - --&pcie { -+&pcie0 { - pinctrl-names = "default"; -- pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>; -+ pinctrl-0 = <&pcie0_pins>; - status = "okay"; -+}; - -- pcie@0,0 { -- status = "okay"; -- }; -- -- pcie@1,0 { -- status = "okay"; -- }; -+&pcie1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pcie1_pins>; -+ status = "okay"; - }; - - &pio { diff --git a/target/linux/mediatek/patches-5.4/0994-ARM-dts-mediatek-Update-mt7629-PCIe-node.patch b/target/linux/mediatek/patches-5.4/0994-ARM-dts-mediatek-Update-mt7629-PCIe-node.patch deleted file mode 100644 index f166aa75de..0000000000 --- a/target/linux/mediatek/patches-5.4/0994-ARM-dts-mediatek-Update-mt7629-PCIe-node.patch +++ /dev/null @@ -1,203 +0,0 @@ -From patchwork Thu May 28 06:16:48 2020 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -X-Patchwork-Submitter: Chuanjia Liu -X-Patchwork-Id: 11574797 -Return-Path: - -Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org - [172.30.200.123]) - by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 30A5E1392 - for ; - Thu, 28 May 2020 06:29:05 +0000 (UTC) -Received: from bombadil.infradead.org (bombadil.infradead.org - [198.137.202.133]) - (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) - (No client certificate requested) - by mail.kernel.org (Postfix) with ESMTPS id 08B6320721 - for ; - Thu, 28 May 2020 06:29:05 +0000 (UTC) -Authentication-Results: mail.kernel.org; - dkim=pass (2048-bit key) header.d=lists.infradead.org - header.i=@lists.infradead.org header.b="auhxDafY"; - dkim=fail reason="signature verification failed" (1024-bit key) - header.d=mediatek.com header.i=@mediatek.com header.b="Kj09Arxb" -DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 08B6320721 -Authentication-Results: mail.kernel.org; - dmarc=fail (p=none dis=none) header.from=mediatek.com -Authentication-Results: mail.kernel.org; - spf=none - smtp.mailfrom=linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=lists.infradead.org; s=bombadil.20170209; h=Sender: - Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: - List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: - Message-ID:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: - Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: - List-Owner; bh=+QPxF1vlOH7StIZYuXJa3V40x8QVDxCLF9AFXHblB9M=; b=auhxDafYBeaUZO - aYp2KVO8Aie0v4tYtRwBon7hF+x55JwD78SAxQR2RsSvrlOo9cMYYby+ToUWflVUWQ60FapAl+w+l - nkEjIOrLBErHwxNOcsD8T5kjyCBMqlz4OMAQYUDNJ3fSugRlGhOtxkjCGd9ebB8N2Rvu6/U8P1A9n - P15mEQoc+RLonR1+9mBgwTEXErjsraxkimTD4Txsp4IvMs3UdsMkP+r3OT5S/p+Uj6O9ES0h7xIon - aL79KaVqRLHrfZxnrVwuGiecAiTp8qLy9clHuJU32NA6ZcXH1OnWipKApgp8Ck7ys80WPKaMrat9B - XuskJ63w13DZAbCVvuGQ==; -Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) - by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeC2J-00014n-M9; Thu, 28 May 2020 06:29:03 +0000 -Received: from mailgw02.mediatek.com ([216.200.240.185]) - by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) - id 1jeC2H-00013t-Li; Thu, 28 May 2020 06:29:03 +0000 -X-UUID: a4877c1586e64afeb2d6172e10605d2b-20200527 -DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; - d=mediatek.com; - s=dk; - h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; - bh=CIwcBFK1x0LbOjDt1BG6/knHFxDHRiqj8ov/jWEZDBY=; - b=Kj09ArxbnLVTc9bpaVPT3jQrIVjhL87sSYyVF9dFypS976k78Ce9gZd0f4K3zAZbYZHYoQtuyOQ9TOeufQfgD+Cr+j5VR7pTdO2E1iXHFs/eQAz5gAjvjlK01z1JiunrLnn9dvIr6c1gEkjQHny0VpuZ1duxx79jwYusg/Nw6Wc=; -X-UUID: a4877c1586e64afeb2d6172e10605d2b-20200527 -Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by - mailgw02.mediatek.com - (envelope-from ) - (musrelay.mediatek.com ESMTP with TLS) - with ESMTP id 899663677; Wed, 27 May 2020 22:29:21 -0800 -Received: from MTKMBS07N2.mediatek.inc (172.21.101.141) by - MTKMBS62DR.mediatek.inc (172.29.94.18) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Wed, 27 May 2020 23:18:50 -0700 -Received: from mtkcas07.mediatek.inc (172.21.101.84) by - mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server (TLS) id - 15.0.1497.2; Thu, 28 May 2020 14:18:54 +0800 -Received: from localhost.localdomain (10.17.3.153) by mtkcas07.mediatek.inc - (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend - Transport; Thu, 28 May 2020 14:18:52 +0800 -From: -To: , , -Subject: [PATCH v2 4/4] ARM: dts: mediatek: Update mt7629 PCIe node -Date: Thu, 28 May 2020 14:16:48 +0800 -Message-ID: <20200528061648.32078-5-chuanjia.liu@mediatek.com> -X-Mailer: git-send-email 2.18.0 -In-Reply-To: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -References: <20200528061648.32078-1-chuanjia.liu@mediatek.com> -MIME-Version: 1.0 -X-MTK: N -X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 -X-CRM114-CacheID: sfid-20200527_232901_719172_E5A99C62 -X-CRM114-Status: GOOD ( 11.61 ) -X-Spam-Score: -0.2 (/) -X-Spam-Report: SpamAssassin version 3.4.4 on bombadil.infradead.org summary: - Content analysis details: (-0.2 points) - pts rule name description - ---- ---------------------- - -------------------------------------------------- - -0.0 SPF_PASS SPF: sender matches SPF record - 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record - 0.0 MIME_BASE64_TEXT RAW: Message text disguised using base64 - encoding - -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from - author's domain - 0.1 DKIM_SIGNED Message has a DKIM or DK signature, - not necessarily - valid - -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature - -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from - envelope-from domain - 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay - lines -X-BeenThere: linux-mediatek@lists.infradead.org -X-Mailman-Version: 2.1.29 -Precedence: list -List-Id: -List-Unsubscribe: , - -List-Archive: -List-Post: -List-Help: -List-Subscribe: , - -Cc: devicetree@vger.kernel.org, lorenzo.pieralisi@arm.com, - srv_heupstream@mediatek.com, "chuanjia.liu" , - linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, - jianjun.wang@mediatek.com, linux-mediatek@lists.infradead.org, - yong.wu@mediatek.com, bhelgaas@google.com, - linux-arm-kernel@lists.infradead.org, amurray@thegoodpenguin.co.uk -Sender: "Linux-mediatek" -Errors-To: - linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org - -From: "chuanjia.liu" - -Remove unused property and add pciecfg node. - -Signed-off-by: chuanjia.liu ---- - arch/arm/boot/dts/mt7629-rfb.dts | 3 ++- - arch/arm/boot/dts/mt7629.dtsi | 23 +++++++++++++---------- - 2 files changed, 15 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/mt7629-rfb.dts -+++ b/arch/arm/boot/dts/mt7629-rfb.dts -@@ -176,9 +176,10 @@ - }; - }; - --&pcie { -+&pcie1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pins>; -+ status = "okay"; - }; - - &pciephy1 { ---- a/arch/arm/boot/dts/mt7629.dtsi -+++ b/arch/arm/boot/dts/mt7629.dtsi -@@ -368,16 +368,21 @@ - #reset-cells = <1>; - }; - -- pcie: pcie@1a140000 { -+ pciecfg: pciecfg@1a140000 { -+ compatible = "mediatek,mt7629-pciecfg", "syscon"; -+ reg = <0x1a140000 0x1000>; -+ }; -+ -+ pcie1: pcie@1a145000 { - compatible = "mediatek,mt7629-pcie"; - device_type = "pci"; -- reg = <0x1a140000 0x1000>, -- <0x1a145000 0x1000>; -- reg-names = "subsys","port1"; -+ reg = <0x1a145000 0x1000>; -+ reg-names = "port1"; -+ mediatek,pcie-cfg = <&pciecfg>; - #address-cells = <3>; - #size-cells = <2>; -- interrupts = , -- ; -+ interrupts = ; -+ interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, -@@ -398,21 +403,19 @@ - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>; -+ status = "disabled"; - -- pcie1: pcie@1,0 { -- device_type = "pci"; -+ slot1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges; -- num-lanes = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; -- - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; diff --git a/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch b/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch deleted file mode 100644 index 74a294f098..0000000000 --- a/target/linux/mediatek/patches-5.4/1003-dts-mt7622-rfb-change-to-ax-mtd-layout.patch +++ /dev/null @@ -1,23 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts -@@ -589,17 +589,17 @@ - - factory: partition@1c0000 { - label = "Factory"; -- reg = <0x1c0000 0x0040000>; -+ reg = <0x1c0000 0x0100000>; - }; - - partition@200000 { - label = "firmware"; -- reg = <0x200000 0x2000000>; -+ reg = <0x2c0000 0x2000000>; - }; - - partition@2200000 { - label = "User_data"; -- reg = <0x2200000 0x4000000>; -+ reg = <0x22c0000 0x4000000>; - }; - }; - }; diff --git a/target/linux/mediatek/patches-5.4/1010-pcie-mediatek-fix-clearing-interrupt-status.patch b/target/linux/mediatek/patches-5.4/1010-pcie-mediatek-fix-clearing-interrupt-status.patch deleted file mode 100644 index d3ef78dc72..0000000000 --- a/target/linux/mediatek/patches-5.4/1010-pcie-mediatek-fix-clearing-interrupt-status.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Felix Fietkau -Date: Fri, 4 Sep 2020 18:33:27 +0200 -Subject: [PATCH] pcie-mediatek: fix clearing interrupt status - -Clearing the status needs to happen after running the handler, otherwise -we will get an extra spurious interrupt after the cause has been cleared - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/pci/controller/pcie-mediatek.c -+++ b/drivers/pci/controller/pcie-mediatek.c -@@ -616,10 +616,10 @@ static void mtk_pcie_intr_handler(struct - if (status & INTX_MASK) { - for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) { - /* Clear the INTx */ -- writel(1 << bit, port->base + PCIE_INT_STATUS); - virq = irq_find_mapping(port->irq_domain, - bit - INTX_SHIFT); - generic_handle_irq(virq); -+ writel(1 << bit, port->base + PCIE_INT_STATUS); - } - } - diff --git a/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch b/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch deleted file mode 100644 index 3f7660b14b..0000000000 --- a/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch +++ /dev/null @@ -1,85 +0,0 @@ -From: Felix Fietkau -Date: Fri, 4 Sep 2020 18:36:06 +0200 -Subject: [PATCH] net: ethernet: mtk_eth_soc: add support for coherent DMA - -It improves performance by eliminating the need for a cache flush on rx and tx - -Signed-off-by: Felix Fietkau ---- - ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -357,7 +357,7 @@ - }; - - cci_control2: slave-if@5000 { -- compatible = "arm,cci-400-ctrl-if"; -+ compatible = "arm,cci-400-ctrl-if", "syscon"; - interface-type = "ace"; - reg = <0x5000 0x1000>; - }; -@@ -969,6 +969,8 @@ - power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; - mediatek,ethsys = <ðsys>; - mediatek,sgmiisys = <&sgmiisys>; -+ mediatek,cci-control = <&cci_control2>; -+ dma-coherent; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -9,6 +9,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -2506,6 +2507,13 @@ static int mtk_hw_init(struct mtk_eth *e - if (ret) - goto err_disable_pm; - -+ if (of_dma_is_coherent(eth->dev->of_node)) { -+ u32 mask = ETHSYS_DMA_AG_MAP_PDMA | ETHSYS_DMA_AG_MAP_QDMA | -+ ETHSYS_DMA_AG_MAP_PPE; -+ -+ regmap_update_bits(eth->ethsys, ETHSYS_DMA_AG_MAP, mask, mask); -+ } -+ - if (MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628)) { - ret = device_reset(eth->dev); - if (ret) { -@@ -3101,6 +3109,16 @@ static int mtk_probe(struct platform_dev - } - } - -+ if (of_dma_is_coherent(pdev->dev.of_node)) { -+ struct regmap *cci; -+ -+ cci = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "mediatek,cci-control"); -+ /* enable CPU/bus coherency */ -+ if (!IS_ERR(cci)) -+ regmap_write(cci, 0, 3); -+ } -+ - if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) { - eth->sgmii = devm_kzalloc(eth->dev, sizeof(*eth->sgmii), - GFP_KERNEL); ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h -@@ -448,6 +448,12 @@ - #define RSTCTRL_FE BIT(6) - #define RSTCTRL_PPE BIT(31) - -+/* ethernet dma channel agent map */ -+#define ETHSYS_DMA_AG_MAP 0x408 -+#define ETHSYS_DMA_AG_MAP_PDMA BIT(0) -+#define ETHSYS_DMA_AG_MAP_QDMA BIT(1) -+#define ETHSYS_DMA_AG_MAP_PPE BIT(2) -+ - /* SGMII subsystem config registers */ - /* Register to auto-negotiation restart */ - #define SGMSYS_PCS_CONTROL_1 0x0 diff --git a/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch b/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch deleted file mode 100644 index 20a67676e3..0000000000 --- a/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch +++ /dev/null @@ -1,108 +0,0 @@ -From: Felix Fietkau -Date: Fri, 4 Sep 2020 18:42:42 +0200 -Subject: [PATCH] pci: pcie-mediatek: add support for coherent DMA - -It improves performance by eliminating the need for a cache flush for DMA on -attached devices - -Signed-off-by: Felix Fietkau ---- - ---- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi -+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -805,6 +805,8 @@ - reg = <0 0x1a143000 0 0x1000>; - reg-names = "port0"; - mediatek,pcie-cfg = <&pciecfg>; -+ mediatek,hifsys = <&hifsys>; -+ mediatek,cci-control = <&cci_control2>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; -@@ -822,6 +824,7 @@ - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; - status = "disabled"; -+ dma-coherent; - - slot0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; -@@ -848,6 +851,8 @@ - reg = <0 0x1a145000 0 0x1000>; - reg-names = "port1"; - mediatek,pcie-cfg = <&pciecfg>; -+ mediatek,hifsys = <&hifsys>; -+ mediatek,cci-control = <&cci_control2>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; -@@ -866,6 +871,7 @@ - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; - status = "disabled"; -+ dma-coherent; - - slot1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; -@@ -925,6 +931,11 @@ - }; - }; - -+ hifsys: syscon@1af00000 { -+ compatible = "mediatek,mt7622-hifsys", "syscon"; -+ reg = <0 0x1af00000 0 0x70>; -+ }; -+ - ethsys: syscon@1b000000 { - compatible = "mediatek,mt7622-ethsys", - "syscon"; ---- a/drivers/pci/controller/pcie-mediatek.c -+++ b/drivers/pci/controller/pcie-mediatek.c -@@ -20,6 +20,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -139,6 +140,11 @@ - #define PCIE_LINK_STATUS_V2 0x804 - #define PCIE_PORT_LINKUP_V2 BIT(10) - -+/* DMA channel mapping */ -+#define HIFSYS_DMA_AG_MAP 0x008 -+#define HIFSYS_DMA_AG_MAP_PCIE0 BIT(0) -+#define HIFSYS_DMA_AG_MAP_PCIE1 BIT(1) -+ - struct mtk_pcie_port; - - /** -@@ -1068,6 +1074,27 @@ static int mtk_pcie_setup(struct mtk_pci - } - } - -+ if (of_dma_is_coherent(node)) { -+ struct regmap *con; -+ u32 mask; -+ -+ con = syscon_regmap_lookup_by_phandle(node, -+ "mediatek,cci-control"); -+ /* enable CPU/bus coherency */ -+ if (!IS_ERR(con)) -+ regmap_write(con, 0, 3); -+ -+ con = syscon_regmap_lookup_by_phandle(node, -+ "mediatek,hifsys"); -+ if (IS_ERR(con)) { -+ dev_err(dev, "missing hifsys node\n"); -+ return PTR_ERR(con); -+ } -+ -+ mask = HIFSYS_DMA_AG_MAP_PCIE0 | HIFSYS_DMA_AG_MAP_PCIE1; -+ regmap_update_bits(con, HIFSYS_DMA_AG_MAP, mask, mask); -+ } -+ - for_each_available_child_of_node(node, child) { - int slot; - diff --git a/target/linux/mediatek/patches-5.4/1020-spi-nor-w25q512jv.patch b/target/linux/mediatek/patches-5.4/1020-spi-nor-w25q512jv.patch deleted file mode 100644 index a234555556..0000000000 --- a/target/linux/mediatek/patches-5.4/1020-spi-nor-w25q512jv.patch +++ /dev/null @@ -1,25 +0,0 @@ -From: David Bauer -Date: Thu, 11 Feb 2021 19:57:26 +0100 -Subject: [PATCH] mtd: spi-nor: add support for Winbond W25Q512 - -The Winbond W25Q512 is a 512mb SPI-NOR chip. It supports 4K sectors as -well as block protection and Dual-/Quad-read. - -Tested on: Ubiquiti UniFi 6 LR - -Signed-off-by: David Bauer - -Ref: https://patchwork.ozlabs.org/project/linux-mtd/patch/20210213151047.11700-1-mail@david-bauer.net/ - ---- a/drivers/mtd/spi-nor/spi-nor.c -+++ b/drivers/mtd/spi-nor/spi-nor.c -@@ -2552,6 +2552,9 @@ static const struct flash_info spi_nor_i - .fixups = &w25q256_fixups }, - { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512, - SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, -+ { "w25q512jv", INFO(0xef4020, 0, 64 * 1024, 1024, -+ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ | -+ SPI_NOR_HAS_TB | SPI_NOR_HAS_LOCK) }, - { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, - SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, - diff --git a/target/linux/mediatek/patches-5.4/1021-ubnt-ledbar-driver.patch b/target/linux/mediatek/patches-5.4/1021-ubnt-ledbar-driver.patch deleted file mode 100644 index 41ab094e9f..0000000000 --- a/target/linux/mediatek/patches-5.4/1021-ubnt-ledbar-driver.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -824,6 +824,16 @@ config LEDS_LM36274 - Say Y to enable the LM36274 LED driver for TI LMU devices. - This supports the LED device LM36274. - -+config LEDS_UBNT_LEDBAR -+ tristate "LED support for Ubiquiti UniFi 6 LR" -+ depends on LEDS_CLASS && I2C && OF -+ help -+ This option enables support for the Ubiquiti LEDBAR -+ LED driver. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called leds-ubnt-ledbar. -+ - comment "LED Triggers" - source "drivers/leds/trigger/Kconfig" - ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -85,6 +85,7 @@ obj-$(CONFIG_LEDS_LM3601X) += leds-lm36 - obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o - obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o - obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o -+obj-$(CONFIG_LEDS_UBNT_LEDBAR) += leds-ubnt-ledbar.o - - # LED SPI Drivers - obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o diff --git a/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch b/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch deleted file mode 100644 index 4d369cefef..0000000000 --- a/target/linux/mediatek/patches-5.4/115-dts-bpi64-add-snand-support.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts -@@ -108,7 +108,7 @@ - }; - - &bch { -- status = "disabled"; -+ status = "okay"; - }; - - &btif { -@@ -283,14 +283,40 @@ - status = "disabled"; - }; - --&nor_flash { -+&snfi { - pinctrl-names = "default"; -- pinctrl-0 = <&spi_nor_pins>; -- status = "disabled"; -+ pinctrl-0 = <&serial_nand_pins>; -+ status = "okay"; - -- flash@0 { -- compatible = "jedec,spi-nor"; -+ snand: spi_nand@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "spi-nand"; -+ spi-max-frequency = <104000000>; - reg = <0>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "bl2"; -+ reg = <0x0 0x80000>; -+ read-only; -+ }; -+ -+ partition@80000 { -+ label = "fip"; -+ reg = <0x80000 0x200000>; -+ read-only; -+ }; -+ -+ partition@280000 { -+ label = "ubi"; -+ reg = <0x280000 0x7d80000>; -+ }; -+ }; - }; - }; -