From: Alexander Duyck Date: Thu, 16 Jun 2016 19:21:09 +0000 (-0700) Subject: bnx2x: Move all UDP port notifiers to single function X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6b3529123dbe2d9cf728231a6857ee8ce2fa7d83;p=openwrt%2Fstaging%2Fblogic.git bnx2x: Move all UDP port notifiers to single function This patch goes through and combines the notifiers for VXLAN and GENEVE into a single function for each action. So there is now one combined function for getting ports, one for adding the ports, and one for deleting the ports. I also went through and dropped the BNX2X VXLAN and GENEVE specific build flags. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index 18042c2460bd..d92c37fa8036 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -139,26 +139,6 @@ config BNX2X_SRIOV Virtualization support in the 578xx and 57712 products. This allows for virtual function acceleration in virtual environments. -config BNX2X_VXLAN - bool "Virtual eXtensible Local Area Network support" - default n - depends on BNX2X && VXLAN && !(BNX2X=y && VXLAN=m) - ---help--- - This enables hardward offload support for VXLAN protocol over the - NetXtremeII series adapters. - Say Y here if you want to enable hardware offload support for - Virtual eXtensible Local Area Network (VXLAN) in the driver. - -config BNX2X_GENEVE - bool "Generic Network Virtualization Encapsulation (GENEVE) support" - depends on BNX2X && GENEVE && !(BNX2X=y && GENEVE=m) - ---help--- - This allows one to create GENEVE virtual interfaces that provide - Layer 2 Networks over Layer 3 Networks. GENEVE is often used - to tunnel virtual network infrastructure in virtualized environments. - Say Y here if you want to enable hardware offload support for - Generic Network Virtualization Encapsulation (GENEVE) in the driver. - config BGMAC tristate "BCMA bus GBit core support" depends on BCMA && BCMA_HOST_SOC diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index a59d55e25d5f..97e892511666 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -59,9 +59,6 @@ #include #include #include -#if IS_ENABLED(CONFIG_BNX2X_GENEVE) -#include -#endif #include "bnx2x.h" #include "bnx2x_init.h" #include "bnx2x_init_ops.h" @@ -10076,7 +10073,6 @@ static void bnx2x_parity_recover(struct bnx2x *bp) } } -#if defined(CONFIG_BNX2X_VXLAN) || IS_ENABLED(CONFIG_BNX2X_GENEVE) static int bnx2x_udp_port_update(struct bnx2x *bp) { struct bnx2x_func_switch_update_params *switch_update_params; @@ -10177,47 +10173,42 @@ static void __bnx2x_del_udp_port(struct bnx2x *bp, u16 port, DP(BNX2X_MSG_SP, "Deleted UDP tunnel [%d] port %d\n", type, port); } -#endif - -#ifdef CONFIG_BNX2X_VXLAN -static void bnx2x_add_vxlan_port(struct net_device *netdev, - sa_family_t sa_family, __be16 port) -{ - struct bnx2x *bp = netdev_priv(netdev); - u16 t_port = ntohs(port); - - __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN); -} - -static void bnx2x_del_vxlan_port(struct net_device *netdev, - sa_family_t sa_family, __be16 port) -{ - struct bnx2x *bp = netdev_priv(netdev); - u16 t_port = ntohs(port); - - __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN); -} -#endif -#if IS_ENABLED(CONFIG_BNX2X_GENEVE) -static void bnx2x_add_geneve_port(struct net_device *netdev, - sa_family_t sa_family, __be16 port) +static void bnx2x_udp_tunnel_add(struct net_device *netdev, + struct udp_tunnel_info *ti) { struct bnx2x *bp = netdev_priv(netdev); - u16 t_port = ntohs(port); + u16 t_port = ntohs(ti->port); - __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE); + switch (ti->type) { + case UDP_TUNNEL_TYPE_VXLAN: + __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN); + break; + case UDP_TUNNEL_TYPE_GENEVE: + __bnx2x_add_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE); + break; + default: + break; + } } -static void bnx2x_del_geneve_port(struct net_device *netdev, - sa_family_t sa_family, __be16 port) +static void bnx2x_udp_tunnel_del(struct net_device *netdev, + struct udp_tunnel_info *ti) { struct bnx2x *bp = netdev_priv(netdev); - u16 t_port = ntohs(port); + u16 t_port = ntohs(ti->port); - __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE); + switch (ti->type) { + case UDP_TUNNEL_TYPE_VXLAN: + __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_VXLAN); + break; + case UDP_TUNNEL_TYPE_GENEVE: + __bnx2x_del_udp_port(bp, t_port, BNX2X_UDP_PORT_GENEVE); + break; + default: + break; + } } -#endif static int bnx2x_close(struct net_device *dev); @@ -10325,7 +10316,6 @@ sp_rtnl_not_reset: &bp->sp_rtnl_state)) bnx2x_update_mng_version(bp); -#if defined(CONFIG_BNX2X_VXLAN) || IS_ENABLED(CONFIG_BNX2X_GENEVE) if (test_and_clear_bit(BNX2X_SP_RTNL_CHANGE_UDP_PORT, &bp->sp_rtnl_state)) { if (bnx2x_udp_port_update(bp)) { @@ -10335,20 +10325,14 @@ sp_rtnl_not_reset: BNX2X_UDP_PORT_MAX); } else { /* Since we don't store additional port information, - * if no port is configured for any feature ask for + * if no ports are configured for any feature ask for * information about currently configured ports. */ -#ifdef CONFIG_BNX2X_VXLAN - if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count) - vxlan_get_rx_port(bp->dev); -#endif -#if IS_ENABLED(CONFIG_BNX2X_GENEVE) - if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) - geneve_get_rx_port(bp->dev); -#endif + if (!bp->udp_tunnel_ports[BNX2X_UDP_PORT_VXLAN].count && + !bp->udp_tunnel_ports[BNX2X_UDP_PORT_GENEVE].count) + udp_tunnel_get_rx_info(bp->dev); } } -#endif /* work which needs rtnl lock not-taken (as it takes the lock itself and * can be called from other contexts as well) @@ -12551,14 +12535,8 @@ static int bnx2x_open(struct net_device *dev) if (rc) return rc; -#ifdef CONFIG_BNX2X_VXLAN - if (IS_PF(bp)) - vxlan_get_rx_port(dev); -#endif -#if IS_ENABLED(CONFIG_BNX2X_GENEVE) if (IS_PF(bp)) - geneve_get_rx_port(dev); -#endif + udp_tunnel_get_rx_info(dev); return 0; } @@ -13045,14 +13023,8 @@ static const struct net_device_ops bnx2x_netdev_ops = { .ndo_get_phys_port_id = bnx2x_get_phys_port_id, .ndo_set_vf_link_state = bnx2x_set_vf_link_state, .ndo_features_check = bnx2x_features_check, -#ifdef CONFIG_BNX2X_VXLAN - .ndo_add_vxlan_port = bnx2x_add_vxlan_port, - .ndo_del_vxlan_port = bnx2x_del_vxlan_port, -#endif -#if IS_ENABLED(CONFIG_BNX2X_GENEVE) - .ndo_add_geneve_port = bnx2x_add_geneve_port, - .ndo_del_geneve_port = bnx2x_del_geneve_port, -#endif + .ndo_udp_tunnel_add = bnx2x_udp_tunnel_add, + .ndo_udp_tunnel_del = bnx2x_udp_tunnel_del, }; static int bnx2x_set_coherency_mask(struct bnx2x *bp)