From: Masanari Iida Date: Fri, 13 Apr 2012 15:14:11 +0000 (+0900) Subject: Fix typo in various Kconfig file X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6b2aac42b20f495d9ea220036f57596d525d4233;p=openwrt%2Fstaging%2Fblogic.git Fix typo in various Kconfig file Correct spelling typo in various Kconfig file. Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 8a9c767125a4..51b3274cbe71 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -7,7 +7,7 @@ choice help The Freescale (was Motorola) M68K family of processors implements the full 68000 processor instruction set. - The Freescale ColdFire family of processors is a modern derivitive + The Freescale ColdFire family of processors is a modern derivative of the 68000 processor family. They are mainly targeted at embedded applications, and are all System-On-Chip (SOC) devices, as opposed to stand alone CPUs. They implement a subset of the original 68000 diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ce30e2f91d77..923a6c3b9a0a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1001,12 +1001,12 @@ config HOLES_IN_ZONE bool # -# Endianess selection. Sufficiently obscure so many users don't know what to +# Endianness selection. Sufficiently obscure so many users don't know what to # answer,so we try hard to limit the available choices. Also the use of a # choice statement should be more obvious to the user. # choice - prompt "Endianess selection" + prompt "Endianness selection" help Some MIPS machines can be configured for either little or big endian byte order. These modes require different kernels and a different diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 83ed00a5644a..5a43aa0798ca 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -57,7 +57,7 @@ config CMDLINE options. config CMDLINE_OVERRIDE - bool "Built-in command line overrides firware arguments" + bool "Built-in command line overrides firmware arguments" default n depends on CMDLINE_BOOL help diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index a4787197d8fe..66dff2046987 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -141,7 +141,7 @@ config DEBUG_STACKOVERFLOW bool "Check for kernel stack overflow" default y help - Make extra checks for space avaliable on stack in some + Make extra checks for space available on stack in some critical functions. This will cause kernel to run a bit slower, but will catch most of kernel stack overruns and exit gracefuly. diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 425db18580a2..9c80fc07384a 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -258,7 +258,7 @@ config PPC_ICSWX_PID default y ---help--- The PID register in server is used explicitly for ICSWX. In - embedded systems PID managment is done by the system. + embedded systems PID management is done by the system. config PPC_ICSWX_USE_SIGILL bool "Should a bad CT cause a SIGILL?" @@ -266,7 +266,7 @@ config PPC_ICSWX_USE_SIGILL default n ---help--- Should a bad CT used for "non-record form ICSWX" cause an - illegal intruction signal or should it be silent as + illegal instruction signal or should it be silent as architected. If in doubt, say N here. diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index aadbe4f6d537..10ad207dccc2 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -67,7 +67,7 @@ config IO_EVENT_IRQ This option will only enable the IO event platform code. You will still need to enable or compile the actual drivers - that use this infrastruture to handle IO event interrupts. + that use this infrastructure to handle IO event interrupts. Say Y if you are unsure. diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu index ddf096c7d8bf..770ff2d5b94d 100644 --- a/arch/sh/Kconfig.cpu +++ b/arch/sh/Kconfig.cpu @@ -1,7 +1,7 @@ menu "Processor features" choice - prompt "Endianess selection" + prompt "Endianness selection" default CPU_LITTLE_ENDIAN help Some SuperH machines can be configured for either little or big diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 464fa2147dfb..f6b0a6e2ea50 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -16,7 +16,7 @@ menuconfig PM_DEVFREQ is attached to a single device and returns a "representative" clock frequency of the device, which is also attached to a device by 1-to-1. The device registering devfreq takes the - responsiblity to "interpret" the representative frequency and + responsibility to "interpret" the representative frequency and to set its every clock accordingly with the "target" callback given to devfreq. diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index a3d033252995..478eb4a90f2c 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -448,7 +448,7 @@ config HID_PICOLCD_FB select FB_SYS_FOPS ---help--- Provide access to PicoLCD's 256x64 monochrome display via a - frambuffer device. + framebuffer device. config HID_PICOLCD_BACKLIGHT bool "Backlight control" if EXPERT diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 8deedc1b9840..e466ecba8dc1 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -318,7 +318,7 @@ config SENSORS_EXYNOS4_TMU tristate "Temperature sensor on Samsung EXYNOS4" depends on ARCH_EXYNOS4 help - If you say yes here you get support for TMU (Thermal Managment + If you say yes here you get support for TMU (Thermal Management Unit) on SAMSUNG EXYNOS4 series of SoC. This driver can also be built as a module. If so, the module diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index d2c5095deeac..94468a64ce3a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -351,7 +351,7 @@ config I2C_DAVINCI For details please see http://www.ti.com/davinci config I2C_DESIGNWARE_PLATFORM - tristate "Synopsys DesignWare Platfrom" + tristate "Synopsys DesignWare Platform" depends on HAVE_CLK help If you say yes to this option, support will be included for the diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463cc09cb..639e1fc36a39 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -407,7 +407,7 @@ config MFD_MAX8925 select MFD_CORE help Say yes here to support for Maxim Semiconductor MAX8925. This is - a Power Management IC. This driver provies common support for + a Power Management IC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -430,7 +430,7 @@ config MFD_MAX8998 help Say yes here to support for Maxim Semiconductor MAX8998 and National Semiconductor LP3974. This is a Power Management IC. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -441,7 +441,7 @@ config MFD_S5M_CORE select REGMAP_I2C help Support for the Samsung Electronics S5M MFD series. - This driver provies common support for accessing the device, + This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig index cd9bc3b129bc..b4b918a75db2 100644 --- a/drivers/ptp/Kconfig +++ b/drivers/ptp/Kconfig @@ -70,7 +70,7 @@ config DP83640_PHY using the SO_TIMESTAMPING API. In order for this to work, your MAC driver must also - implement the skb_tx_timetamp() function. + implement the skb_tx_timestamp() function. config PTP_1588_CLOCK_PCH tristate "Intel PCH EG20T as PTP clock" diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 37096246c937..eeea76f4dccb 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -937,7 +937,7 @@ config BCM47XX_WDT tristate "Broadcom BCM47xx Watchdog Timer" depends on BCM47XX help - Hardware driver for the Broadcom BCM47xx Watchog Timer. + Hardware driver for the Broadcom BCM47xx Watchdog Timer. config RC32434_WDT tristate "IDT RC32434 SoC Watchdog Timer" diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 94243136f6bf..73f1c99bc540 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -71,7 +71,7 @@ config XEN_DEV_EVTCHN tristate "Xen /dev/xen/evtchn device" default y help - The evtchn driver allows a userspace process to triger event + The evtchn driver allows a userspace process to trigger event channels and to receive notification of an event channel firing. If in doubt, say yes.