From: Hauke Mehrtens Date: Fri, 13 Apr 2012 19:35:40 +0000 (+0000) Subject: kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing X-Git-Tag: v19.07.0-rc1~24945 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6af575967c780fa41029bdb64fdd68646ab516d1;p=openwrt%2Fstaging%2Fhauke.git kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing SVN-Revision: 31278 --- diff --git a/package/mac80211/patches/880-brcmsmac_suspend_signature.patch b/package/mac80211/patches/880-brcmsmac_suspend_signature.patch deleted file mode 100644 index c38e76a488..0000000000 --- a/package/mac80211/patches/880-brcmsmac_suspend_signature.patch +++ /dev/null @@ -1,13 +0,0 @@ -Remove this patch when we get a new version of bcma into our kernel. - ---- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c -+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c -@@ -1129,7 +1129,7 @@ static int __devinit brcms_bcma_probe(st - return 0; - } - --static int brcms_suspend(struct bcma_device *pdev) -+static int brcms_suspend(struct bcma_device *pdev, pm_message_t state) - { - struct brcms_info *wl; - struct ieee80211_hw *hw; diff --git a/package/mac80211/patches/890-b43legay-antenna-gain.patch b/package/mac80211/patches/890-b43legay-antenna-gain.patch new file mode 100644 index 0000000000..9c1510a0ca --- /dev/null +++ b/package/mac80211/patches/890-b43legay-antenna-gain.patch @@ -0,0 +1,11 @@ +--- a/drivers/net/wireless/b43legacy/phy.c ++++ b/drivers/net/wireless/b43legacy/phy.c +@@ -1860,7 +1860,7 @@ void b43legacy_phy_xmitpower(struct b43l + * which accounts for the factor of 4 */ + #define REG_MAX_PWR 20 + max_pwr = min(REG_MAX_PWR * 4 +- - dev->dev->bus->sprom.antenna_gain.ghz24.a0 ++ - dev->dev->bus->sprom.antenna_gain.a0 + - 0x6, max_pwr); + + /* find the desired power in Q5.2 - power_level is in dBm diff --git a/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch b/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch index f86183466c..0042ff7ed8 100644 --- a/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch +++ b/target/linux/brcm47xx/patches-3.2/020-bcma-move-parallel-flash-into-a-union.patch @@ -22,7 +22,7 @@ --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -108,10 +108,68 @@ +@@ -117,10 +117,68 @@ #define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ #define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ #define BCMA_CC_FLASHCTL 0x0040 @@ -91,7 +91,7 @@ #define BCMA_CC_BCAST_ADDR 0x0050 #define BCMA_CC_BCAST_DATA 0x0054 #define BCMA_CC_GPIOPULLUP 0x0058 /* Rev >= 20 only */ -@@ -300,6 +358,12 @@ +@@ -324,6 +382,12 @@ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ @@ -104,7 +104,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -309,6 +373,10 @@ struct bcma_chipcommon_pmu { +@@ -333,6 +397,10 @@ struct bcma_chipcommon_pmu { }; #ifdef CONFIG_BCMA_DRIVER_MIPS @@ -115,7 +115,7 @@ struct bcma_pflash { u8 buswidth; u32 window; -@@ -334,7 +402,10 @@ struct bcma_drv_cc { +@@ -358,7 +426,10 @@ struct bcma_drv_cc { u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS diff --git a/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch b/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch index a55d04bd0c..2de4ba0f52 100644 --- a/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch +++ b/target/linux/brcm47xx/patches-3.2/021-bcma-add-serial-flash-support-to-bcma.patch @@ -23,7 +23,7 @@ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -41,6 +41,11 @@ void bcma_chipco_serial_init(struct bcma +@@ -42,6 +42,11 @@ void bcma_chipco_serial_init(struct bcma u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc); u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc); @@ -455,7 +455,7 @@ pr_info("found parallel flash.\n"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -375,6 +375,7 @@ struct bcma_chipcommon_pmu { +@@ -399,6 +399,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS enum bcma_flash_type { BCMA_PFLASH, @@ -463,7 +463,7 @@ }; struct bcma_pflash { -@@ -383,6 +384,14 @@ struct bcma_pflash { +@@ -407,6 +408,14 @@ struct bcma_pflash { u32 window_size; }; @@ -478,7 +478,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -405,6 +414,9 @@ struct bcma_drv_cc { +@@ -429,6 +438,9 @@ struct bcma_drv_cc { enum bcma_flash_type flash_type; union { struct bcma_pflash pflash; @@ -488,7 +488,7 @@ }; int nr_serial_ports; -@@ -459,4 +471,14 @@ extern void bcma_chipco_chipctl_maskset( +@@ -483,4 +495,14 @@ extern void bcma_chipco_chipctl_maskset( extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); diff --git a/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch b/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch index cc76f83094..6336f41f53 100644 --- a/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch +++ b/target/linux/brcm47xx/patches-3.2/030-bcm47xx-bcma-nandflash.patch @@ -239,7 +239,7 @@ bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -46,6 +46,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr +@@ -47,6 +47,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr int bcma_sflash_init(struct bcma_drv_cc *cc); #endif /* CONFIG_BCMA_SFLASH */ @@ -971,7 +971,7 @@ +MODULE_DESCRIPTION("BCM47XX NAND flash driver"); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -376,6 +376,7 @@ struct bcma_chipcommon_pmu { +@@ -400,6 +400,7 @@ struct bcma_chipcommon_pmu { enum bcma_flash_type { BCMA_PFLASH, BCMA_SFLASH, @@ -979,7 +979,7 @@ }; struct bcma_pflash { -@@ -392,6 +393,14 @@ struct bcma_sflash { +@@ -416,6 +417,14 @@ struct bcma_sflash { }; #endif /* CONFIG_BCMA_SFLASH */ @@ -994,7 +994,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -417,6 +426,9 @@ struct bcma_drv_cc { +@@ -441,6 +450,9 @@ struct bcma_drv_cc { #ifdef CONFIG_BCMA_SFLASH struct bcma_sflash sflash; #endif /* CONFIG_BCMA_SFLASH */ @@ -1004,7 +1004,7 @@ }; int nr_serial_ports; -@@ -481,4 +493,13 @@ int bcma_sflash_write(struct bcma_drv_cc +@@ -505,4 +517,13 @@ int bcma_sflash_write(struct bcma_drv_cc int bcma_sflash_erase(struct bcma_drv_cc *cc, u32 offset); #endif /* CONFIG_BCMA_SFLASH */ diff --git a/target/linux/brcm47xx/patches-3.2/040-bcma-add-the-core-unit-number.patch b/target/linux/brcm47xx/patches-3.2/040-bcma-add-the-core-unit-number.patch deleted file mode 100644 index cba9a63984..0000000000 --- a/target/linux/brcm47xx/patches-3.2/040-bcma-add-the-core-unit-number.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 7b9116eeaf44c0d368b5eeaa06eb101465284596 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Wed, 11 Jan 2012 15:26:11 +0100 -Subject: [PATCH 23/31] bcma: add the core unit number - -Some SoCs have two pcie or gmac cores and we need to know the number of -the specific core on the bus. This is the case for the BCM4706. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/scan.c | 14 ++++++++++++++ - include/linux/bcma/bcma.h | 1 + - 2 files changed, 15 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor - return NULL; - } - -+static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ if (core->id.id == coreid) -+ return core; -+ } -+ return NULL; -+} -+ - static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, - struct bcma_device_id *match, int core_num, - struct bcma_device *core) -@@ -392,6 +403,7 @@ int bcma_bus_scan(struct bcma_bus *bus) - bcma_scan_switch_core(bus, erombase); - - while (eromptr < eromend) { -+ struct bcma_device *other_core; - struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); - if (!core) - return -ENOMEM; -@@ -411,6 +423,8 @@ int bcma_bus_scan(struct bcma_bus *bus) - - core->core_index = core_num++; - bus->nr_cores++; -+ other_core = bcma_find_core_reverse(bus, core->id.id); -+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; - - pr_info("Core %d found: %s " - "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -136,6 +136,7 @@ struct bcma_device { - bool dev_registered; - - u8 core_index; -+ u8 core_unit; - - u32 addr; - u32 wrap; diff --git a/target/linux/brcm47xx/patches-3.2/041-bcma-constants-for-PCI-and-use-them.patch b/target/linux/brcm47xx/patches-3.2/041-bcma-constants-for-PCI-and-use-them.patch deleted file mode 100644 index ab5f48198e..0000000000 --- a/target/linux/brcm47xx/patches-3.2/041-bcma-constants-for-PCI-and-use-them.patch +++ /dev/null @@ -1,334 +0,0 @@ -From 300efafa8e1381a208c723bb9d03d46bf29f1ec0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 14 Jan 2012 20:02:15 +0100 -Subject: [PATCH 24/31] bcma: constants for PCI and use them - -There are loots of magic numbers used in the PCIe code. These constants -are from the Broadcom SDK and will also used in the host controller. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/driver_pci.c | 124 +++++++++++++++++++--------------- - include/linux/bcma/bcma_driver_pci.h | 85 +++++++++++++++++++++++ - 2 files changed, 155 insertions(+), 54 deletions(-) - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -4,6 +4,7 @@ - * - * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2011, 2012, Hauke Mehrtens - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -18,38 +19,39 @@ - - static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) - { -- pcicore_write32(pc, 0x130, address); -- pcicore_read32(pc, 0x130); -- return pcicore_read32(pc, 0x134); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); - } - - #if 0 - static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) - { -- pcicore_write32(pc, 0x130, address); -- pcicore_read32(pc, 0x130); -- pcicore_write32(pc, 0x134, data); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); - } - #endif - - static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - u32 v; - int i; - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 28); /* Write Transaction */ -- v |= (1 << 17); /* Turnaround */ -- v |= (0x1F << 18); -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_WRITE; -+ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << -+ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ v |= BCMA_CORE_PCI_MDIODATA_TA; - v |= (phy << 4); -- pcicore_write32(pc, mdio_data, v); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - - udelay(10); - for (i = 0; i < 200; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) - break; - msleep(1); - } -@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc - - static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - int max_retries = 10; - u16 ret = 0; - u32 v; - int i; - -- v = 0x80; /* Enable Preamble Sequence */ -- v |= 0x2; /* MDIO Clock Divisor */ -- pcicore_write32(pc, mdio_control, v); -+ /* enable mdio access to SERDES */ -+ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; -+ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); - - if (pc->core->id.rev >= 10) { - max_retries = 200; - bcma_pcie_mdio_set_phy(pc, device); -+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ } else { -+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); - } - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 29); /* Read Transaction */ -- v |= (1 << 17); /* Turnaround */ -- if (pc->core->id.rev < 10) -- v |= (u32)device << 22; -- v |= (u32)address << 18; -- pcicore_write32(pc, mdio_data, v); -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_READ; -+ v |= BCMA_CORE_PCI_MDIODATA_TA; -+ -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - /* Wait for the device to complete the transaction */ - udelay(10); - for (i = 0; i < max_retries; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) { -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { - udelay(10); -- ret = pcicore_read32(pc, mdio_data); -+ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); - break; - } - msleep(1); - } -- pcicore_write32(pc, mdio_control, 0); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - return ret; - } - - static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, - u8 address, u16 data) - { -- const u16 mdio_control = 0x128; -- const u16 mdio_data = 0x12C; - int max_retries = 10; - u32 v; - int i; - -- v = 0x80; /* Enable Preamble Sequence */ -- v |= 0x2; /* MDIO Clock Divisor */ -- pcicore_write32(pc, mdio_control, v); -+ /* enable mdio access to SERDES */ -+ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; -+ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); - - if (pc->core->id.rev >= 10) { - max_retries = 200; - bcma_pcie_mdio_set_phy(pc, device); -+ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << -+ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); -+ } else { -+ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); -+ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); - } - -- v = (1 << 30); /* Start of Transaction */ -- v |= (1 << 28); /* Write Transaction */ -- v |= (1 << 17); /* Turnaround */ -- if (pc->core->id.rev < 10) -- v |= (u32)device << 22; -- v |= (u32)address << 18; -+ v = BCMA_CORE_PCI_MDIODATA_START; -+ v |= BCMA_CORE_PCI_MDIODATA_WRITE; -+ v |= BCMA_CORE_PCI_MDIODATA_TA; - v |= data; -- pcicore_write32(pc, mdio_data, v); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); - /* Wait for the device to complete the transaction */ - udelay(10); - for (i = 0; i < max_retries; i++) { -- v = pcicore_read32(pc, mdio_control); -- if (v & 0x100 /* Trans complete */) -+ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); -+ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) - break; - msleep(1); - } -- pcicore_write32(pc, mdio_control, 0); -+ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); - } - - /************************************************** -@@ -138,20 +145,29 @@ static void bcma_pcie_mdio_write(struct - - static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) - { -- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; -+ u32 tmp; -+ -+ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); -+ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) -+ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | -+ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; -+ else -+ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; - } - - static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) - { -- const u8 serdes_pll_device = 0x1D; -- const u8 serdes_rx_device = 0x1F; - u16 tmp; - -- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -- bcma_pcicore_polarity_workaround(pc)); -- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -- if (tmp & 0x4000) -- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); -+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, -+ BCMA_CORE_PCI_SERDES_RX_CTRL, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, -+ BCMA_CORE_PCI_SERDES_PLL_CTRL); -+ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) -+ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, -+ BCMA_CORE_PCI_SERDES_PLL_CTRL, -+ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); - } - - /************************************************** ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -53,6 +53,35 @@ struct pci_dev; - #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 - #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ - #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 -+#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ -+#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ -+#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ -+#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ -+#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 -+#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ -+#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ -+#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ -+#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ -+#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ -+#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ -+#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ -+#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ -+#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ -+#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ -+#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ -+#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ -+#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ - #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ - #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ -@@ -72,6 +101,62 @@ struct pci_dev; - #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ - #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ - -+/* PCIE protocol PHY diagnostic registers */ -+#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ -+#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ -+#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ -+#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ -+#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ -+#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ -+#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ -+#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ -+#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ -+#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ -+#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ -+#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ -+#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ -+#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ -+#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ -+#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ -+#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ -+ -+/* PCIE protocol DLLP diagnostic registers */ -+#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ -+#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ -+#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ -+#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) -+#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ -+#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ -+#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ -+#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ -+#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ -+#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ -+#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ -+#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ -+#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ -+#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ -+#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ -+#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ -+#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ -+#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ -+#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ -+ -+/* SERDES RX registers */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ -+#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ -+#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ -+#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ -+#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ -+ -+/* SERDES PLL registers */ -+#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ -+#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ -+ - /* PCIcore specific boardflags */ - #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ - diff --git a/target/linux/brcm47xx/patches-3.2/042-bcma-export-bcma_pcie_read.patch b/target/linux/brcm47xx/patches-3.2/042-bcma-export-bcma_pcie_read.patch deleted file mode 100644 index 062a29d2f1..0000000000 --- a/target/linux/brcm47xx/patches-3.2/042-bcma-export-bcma_pcie_read.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 01d8709c311858c37e02c96464ea4dc954334210 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 14 Jan 2012 20:03:09 +0100 -Subject: [PATCH 25/31] bcma: export bcma_pcie_read() - -This will be needed by the host controller. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/bcma_private.h | 2 ++ - drivers/bcma/driver_pci.c | 2 +- - 2 files changed, 3 insertions(+), 1 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -51,6 +51,8 @@ int bcma_sflash_init(struct bcma_drv_cc - int bcma_nflash_init(struct bcma_drv_cc *cc); - #endif /* CONFIG_BCMA_NFLASH */ - -+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); -+ - #ifdef CONFIG_BCMA_HOST_PCI - /* host_pci.c */ - extern int __init bcma_host_pci_init(void); ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -17,7 +17,7 @@ - * R/W ops. - **************************************************/ - --static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) -+u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) - { - pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); - pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); diff --git a/target/linux/brcm47xx/patches-3.2/043-bcma-make-some-functions-__devinit.patch b/target/linux/brcm47xx/patches-3.2/043-bcma-make-some-functions-__devinit.patch deleted file mode 100644 index 340172d44f..0000000000 --- a/target/linux/brcm47xx/patches-3.2/043-bcma-make-some-functions-__devinit.patch +++ /dev/null @@ -1,111 +0,0 @@ -From 3cd3138f2ef77e18abc99737c6740f35d61dbbb3 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 15 Jan 2012 23:05:05 +0100 -Subject: [PATCH 26/32] bcma: make some functions __devinit - -bcma_core_pci_hostmode_init() has to be in __devinit as it will call a -function in that section and so all functions calling it also have to -be in __devinit. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/bcma_private.h | 4 ++-- - drivers/bcma/driver_pci.c | 6 +++--- - drivers/bcma/driver_pci_host.c | 2 +- - drivers/bcma/host_pci.c | 4 ++-- - drivers/bcma/main.c | 2 +- - include/linux/bcma/bcma_driver_pci.h | 2 +- - 6 files changed, 10 insertions(+), 10 deletions(-) - ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -13,7 +13,7 @@ - struct bcma_bus; - - /* main.c */ --int bcma_bus_register(struct bcma_bus *bus); -+int __devinit bcma_bus_register(struct bcma_bus *bus); - void bcma_bus_unregister(struct bcma_bus *bus); - int __init bcma_bus_early_register(struct bcma_bus *bus, - struct bcma_device *core_cc, -@@ -60,7 +60,7 @@ extern void __exit bcma_host_pci_exit(vo - #endif /* CONFIG_BCMA_HOST_PCI */ - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE --void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - - #endif ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -174,12 +174,12 @@ static void bcma_pcicore_serdes_workarou - * Init. - **************************************************/ - --static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) -+static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) - { - bcma_pcicore_serdes_workaround(pc); - } - --static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) - { - struct bcma_bus *bus = pc->core->bus; - u16 chipid_top; -@@ -204,7 +204,7 @@ static bool bcma_core_pci_is_in_hostmode - return true; - } - --void bcma_core_pci_init(struct bcma_drv_pci *pc) -+void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) - { - if (pc->setup_done) - return; ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -8,7 +8,7 @@ - #include "bcma_private.h" - #include - --void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) - { - pr_err("No support for PCI core in hostmode yet\n"); - } ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci - .awrite32 = bcma_host_pci_awrite32, - }; - --static int bcma_host_pci_probe(struct pci_dev *dev, -- const struct pci_device_id *id) -+static int __devinit bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) - { - struct bcma_bus *bus; - int err = -ENOMEM; ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -132,7 +132,7 @@ static void bcma_unregister_cores(struct - } - } - --int bcma_bus_register(struct bcma_bus *bus) -+int __devinit bcma_bus_register(struct bcma_bus *bus) - { - int err; - struct bcma_device *core; ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -169,7 +169,7 @@ struct bcma_drv_pci { - #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) - #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) - --extern void bcma_core_pci_init(struct bcma_drv_pci *pc); -+extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); - diff --git a/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch b/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch index 850b52428d..e5740693f1 100644 --- a/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch +++ b/target/linux/brcm47xx/patches-3.2/044-bcma-add-PCIe-host-controller.patch @@ -1,23 +1,3 @@ -From 47d0e8c2743729b4248585d33b55b6aaeac008d5 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 8 Jan 2012 16:53:15 +0100 -Subject: [PATCH 25/34] bcma: add PCIe host controller - -Some SoCs have a PCIe host controller to make it possible to attach -some other devices to it, like an other Wifi card. -This code was tested with an Netgear WNDR3400 (bcm4716 based), but -should work with all bcma based SoCs. - -Signed-off-by: Hauke Mehrtens ---- - arch/mips/pci/pci-bcm47xx.c | 49 +++- - drivers/bcma/bcma_private.h | 1 + - drivers/bcma/driver_pci.c | 38 +-- - drivers/bcma/driver_pci_host.c | 576 +++++++++++++++++++++++++++++++++- - include/linux/bcma/bcma_driver_pci.h | 34 ++ - include/linux/bcma/bcma_regs.h | 27 ++ - 6 files changed, 686 insertions(+), 39 deletions(-) - --- a/arch/mips/pci/pci-bcm47xx.c +++ b/arch/mips/pci/pci-bcm47xx.c @@ -25,6 +25,7 @@ @@ -94,752 +74,3 @@ Signed-off-by: Hauke Mehrtens +#endif + return 0; +} ---- a/drivers/bcma/bcma_private.h -+++ b/drivers/bcma/bcma_private.h -@@ -60,6 +60,7 @@ extern void __exit bcma_host_pci_exit(vo - #endif /* CONFIG_BCMA_HOST_PCI */ - - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); - void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ - ---- a/drivers/bcma/driver_pci.c -+++ b/drivers/bcma/driver_pci.c -@@ -2,7 +2,7 @@ - * Broadcom specific AMBA - * PCI Core - * -- * Copyright 2005, Broadcom Corporation -+ * Copyright 2005, 2011, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch - * Copyright 2011, 2012, Hauke Mehrtens - * -@@ -179,47 +179,19 @@ static void __devinit bcma_core_pci_clie - bcma_pcicore_serdes_workaround(pc); - } - --static bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) --{ -- struct bcma_bus *bus = pc->core->bus; -- u16 chipid_top; -- -- chipid_top = (bus->chipinfo.id & 0xFF00); -- if (chipid_top != 0x4700 && -- chipid_top != 0x5300) -- return false; -- --#ifdef CONFIG_SSB_DRIVER_PCICORE -- if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -- return false; --#endif /* CONFIG_SSB_DRIVER_PCICORE */ -- --#if 0 -- /* TODO: on BCMA we use address from EROM instead of magic formula */ -- u32 tmp; -- return !mips_busprobe32(tmp, (bus->mmio + -- (pc->core->core_index * BCMA_CORE_SIZE))); --#endif -- -- return true; --} -- - void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) - { - if (pc->setup_done) - return; - -- if (bcma_core_pci_is_in_hostmode(pc)) { - #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); -+ if (pc->hostmode) - bcma_core_pci_hostmode_init(pc); --#else -- pr_err("Driver compiled without support for hostmode PCI\n"); - #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -- } else { -- bcma_core_pci_clientmode_init(pc); -- } - -- pc->setup_done = true; -+ if (!pc->hostmode) -+ bcma_core_pci_clientmode_init(pc); - } - - int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -2,13 +2,587 @@ - * Broadcom specific AMBA - * PCI Core in hostmode - * -+ * Copyright 2005 - 2011, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch -+ * Copyright 2011, 2012, Hauke Mehrtens -+ * - * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include "bcma_private.h" -+#include - #include -+#include -+ -+/* Probe a 32bit value on the bus and catch bus exceptions. -+ * Returns nonzero on a bus exception. -+ * This is MIPS specific */ -+#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) -+ -+/* Assume one-hot slot wiring */ -+#define BCMA_PCI_SLOT_MAX 16 -+#define PCI_CONFIG_SPACE_SIZE 256 -+ -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ u32 tmp; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { -+ pr_info("This PCI core is disabled and not working\n"); -+ return false; -+ } -+ -+ bcma_core_enable(pc->core, 0); -+ -+ return !mips_busprobe32(tmp, pc->core->io_addr); -+} -+ -+static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); -+} -+ -+static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, -+ u32 data) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); -+} -+ -+static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off) -+{ -+ u32 addr = 0; -+ -+ /* Issue config commands only when the data link is up (atleast -+ * one external pcie device is present). -+ */ -+ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) -+ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) -+ goto out; -+ -+ /* Type 0 transaction */ -+ /* Slide the PCI window to the appropriate slot */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ /* Calculate the address */ -+ addr = pc->host_controller->host_cfg_addr; -+ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); -+ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); -+ addr |= (off & ~3); -+ -+out: -+ return addr; -+} -+ -+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr, val; -+ void __iomem *mmio = 0; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* we support only two functions on device 0 */ -+ if (func > 1) -+ return -EINVAL; -+ -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off >= PCI_CONFIG_SPACE_SIZE) { -+ addr = (func << 12); -+ addr |= (off & 0x0FFF); -+ val = bcma_pcie_read_config(pc, addr); -+ } else { -+ addr = BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xfc); -+ val = pcicore_read32(pc, addr); -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xffffffff; -+ goto unmap; -+ } -+ -+ val = readl(mmio); -+ } -+ val >>= (8 * (off & 3)); -+ -+ switch (len) { -+ case 1: -+ *((u8 *)buf) = (u8)val; -+ break; -+ case 2: -+ *((u16 *)buf) = (u16)val; -+ break; -+ case 4: -+ *((u32 *)buf) = (u32)val; -+ break; -+ } -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ const void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr = 0, val = 0; -+ void __iomem *mmio = 0; -+ u16 chipid = pc->core->bus->chipinfo.id; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off < PCI_CONFIG_SPACE_SIZE) { -+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xfc); -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xffffffff; -+ goto unmap; -+ } -+ } -+ -+ switch (len) { -+ case 1: -+ val = readl(mmio); -+ val &= ~(0xFF << (8 * (off & 3))); -+ val |= *((const u8 *)buf) << (8 * (off & 3)); -+ break; -+ case 2: -+ val = readl(mmio); -+ val &= ~(0xFFFF << (8 * (off & 3))); -+ val |= *((const u16 *)buf) << (8 * (off & 3)); -+ break; -+ case 4: -+ val = *((const u32 *)buf); -+ break; -+ } -+ if (dev == 0 && !addr) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ addr = (func << 12); -+ addr |= (off & 0x0FFF); -+ bcma_pcie_write_config(pc, addr, val); -+ } else { -+ writel(val, mmio); -+ -+ if (chipid == 0x4716 || chipid == 0x4748) -+ readl(mmio); -+ } -+ -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, &val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+/* return cap_offset if requested capability exists in the PCI config space */ -+static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, -+ unsigned int dev, -+ unsigned int func, u8 req_cap_id, -+ unsigned char *buf, u32 *buflen) -+{ -+ u8 cap_id; -+ u8 cap_ptr = 0; -+ u32 bufsize; -+ u8 byte_val; -+ -+ /* check for Header type 0 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, -+ sizeof(u8)); -+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) -+ return cap_ptr; -+ -+ /* check if the capability pointer field exists */ -+ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, -+ sizeof(u8)); -+ if (!(byte_val & PCI_STATUS_CAP_LIST)) -+ return cap_ptr; -+ -+ /* check if the capability pointer is 0x00 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ -+ /* loop thr'u the capability list and see if the requested capabilty -+ * exists */ -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); -+ while (cap_id != req_cap_id) { -+ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, -+ sizeof(u8)); -+ } -+ -+ /* found the caller requested capability */ -+ if ((buf != NULL) && (buflen != NULL)) { -+ u8 cap_data; -+ -+ bufsize = *buflen; -+ if (!bufsize) -+ return cap_ptr; -+ -+ *buflen = 0; -+ -+ /* copy the cpability data excluding cap ID and next ptr */ -+ cap_data = cap_ptr + 2; -+ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) -+ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; -+ *buflen = bufsize; -+ while (bufsize--) { -+ bcma_extpci_read_config(pc, dev, func, cap_data, buf, -+ sizeof(u8)); -+ cap_data++; -+ buf++; -+ } -+ } -+ -+ return cap_ptr; -+} -+ -+/* If the root port is capable of returning Config Request -+ * Retry Status (CRS) Completion Status to software then -+ * enable the feature. -+ */ -+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) -+{ -+ u8 cap_ptr, root_ctrl, root_cap, dev; -+ u16 val16; -+ int i; -+ -+ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, -+ NULL); -+ root_cap = cap_ptr + PCI_EXP_RTCAP; -+ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); -+ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { -+ /* Enable CRS software visibility */ -+ root_ctrl = cap_ptr + PCI_EXP_RTCTL; -+ val16 = PCI_EXP_RTCTL_CRSSVE; -+ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, -+ sizeof(u16)); -+ -+ /* Initiate a configuration request to read the vendor id -+ * field of the device function's config space header after -+ * 100 ms wait time from the end of Reset. If the device is -+ * not done with its internal initialization, it must at -+ * least return a completion TLP, with a completion status -+ * of "Configuration Request Retry Status (CRS)". The root -+ * complex must complete the request to the host by returning -+ * a read-data value of 0001h for the Vendor ID field and -+ * all 1s for any additional bytes included in the request. -+ * Poll using the config reads for max wait time of 1 sec or -+ * until we receive the successful completion status. Repeat -+ * the procedure for all the devices. -+ */ -+ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { -+ for (i = 0; i < 100000; i++) { -+ bcma_extpci_read_config(pc, dev, 0, -+ PCI_VENDOR_ID, &val16, -+ sizeof(val16)); -+ if (val16 != 0x1) -+ break; -+ udelay(10); -+ } -+ if (val16 == 0x1) -+ pr_err("PCI: Broken device in slot %d\n", dev); -+ } -+ } -+} - - void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) - { -- pr_err("No support for PCI core in hostmode yet\n"); -+ struct bcma_bus *bus = pc->core->bus; -+ struct bcma_drv_pci_host *pc_host; -+ u32 tmp; -+ u32 pci_membase_1G; -+ unsigned long io_map_base; -+ -+ pr_info("PCIEcore in host mode found\n"); -+ -+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); -+ if (!pc_host) { -+ pr_err("can not allocate memory"); -+ return; -+ } -+ -+ pc->host_controller = pc_host; -+ pc_host->pci_controller.io_resource = &pc_host->io_resource; -+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; -+ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; -+ pc_host->pdev = pc; -+ -+ pci_membase_1G = BCMA_SOC_PCI_DMA; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; -+ -+ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; -+ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; -+ -+ pc_host->mem_resource.name = "BCMA PCIcore external memory", -+ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; -+ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ -+ pc_host->io_resource.name = "BCMA PCIcore external I/O", -+ pc_host->io_resource.start = 0x100; -+ pc_host->io_resource.end = 0x7FF; -+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; -+ -+ /* Reset RC */ -+ udelay(3000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); -+ udelay(1000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | -+ BCMA_CORE_PCI_CTL_RST_OE); -+ -+ /* 64 MB I/O access window. On 4716, use -+ * sbtopcie0 to access the device registers. We -+ * can't use address match 2 (1 GB window) region -+ * as mips can't generate 64-bit address on the -+ * backplane. -+ */ -+ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); -+ } else if (bus->chipinfo.id == 0x5300) { -+ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; -+ if (pc->core->core_unit == 0) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI_MEM); -+ } else if (pc->core->core_unit == 1) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI1_MEM); -+ } -+ } else -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_IO); -+ -+ /* 64 MB configuration access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ -+ /* 1 GB memory access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, -+ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); -+ -+ -+ /* As per PCI Express Base Spec 1.1 we need to wait for -+ * at least 100 ms from the end of a reset (cold/warm/hot) -+ * before issuing configuration requests to PCI Express -+ * devices. -+ */ -+ udelay(100000); -+ -+ bcma_core_pci_enable_crs(pc); -+ -+ /* Enable PCI bridge BAR0 memory & master access */ -+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); -+ -+ /* Enable PCI interrupts */ -+ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); -+ -+ /* Ok, ready to run, register it to the system. -+ * The following needs change, if we want to port hostmode -+ * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -+ 0x04000000); -+ pc_host->pci_controller.io_map_base = io_map_base; -+ set_io_port_base(pc_host->pci_controller.io_map_base); -+ /* Give some time to the PCI controller to configure itself with the new -+ * values. Not waiting at this point causes crashes of the machine. */ -+ mdelay(10); -+ register_pci_controller(&pc_host->pci_controller); -+ return; -+} -+ -+/* Early PCI fixup for a device on the PCI-core bridge. */ -+static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) -+{ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ if (pcibios_enable_device(dev, ~0) < 0) { -+ pr_err("PCI: BCMA bridge enable failed\n"); -+ return; -+ } -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); -+ -+/* Early PCI fixup for all PCI-cores to set the correct memory address. */ -+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) -+{ -+ struct resource *res; -+ int pos; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) == 0) -+ return; -+ -+ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); -+ -+ for (pos = 0; pos < 6; pos++) { -+ res = &dev->resource[pos]; -+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) -+ pci_assign_resource(dev, pos); -+ } -+} -+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); -+ -+/* This function is called when doing a pci_enable_device(). -+ * We must first check if the device is a device on the PCI-core bridge. */ -+int bcma_core_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ -+ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); -+ -+ /* Fix up interrupt lines */ -+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); -+ -+/* PCI device IRQ mapping. */ -+int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ return bcma_core_mips_irq(pc_host->pdev->core) + 2; - } -+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); ---- a/include/linux/bcma/bcma_driver_pci.h -+++ b/include/linux/bcma/bcma_driver_pci.h -@@ -160,9 +160,40 @@ struct pci_dev; - /* PCIcore specific boardflags */ - #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ - -+/* PCIE Config space accessing MACROS */ -+#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ -+#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ -+#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ -+#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ -+ -+#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ -+#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ -+#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ -+#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ -+ -+/* PCIE Root Capability Register bits (Host mode only) */ -+#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 -+ -+struct bcma_drv_pci; -+ -+struct bcma_drv_pci_host { -+ struct bcma_drv_pci *pdev; -+ -+ u32 host_cfg_addr; -+ spinlock_t cfgspace_lock; -+ -+ struct pci_controller pci_controller; -+ struct pci_ops pci_ops; -+ struct resource mem_resource; -+ struct resource io_resource; -+}; -+ - struct bcma_drv_pci { - struct bcma_device *core; - u8 setup_done:1; -+ u8 hostmode:1; -+ -+ struct bcma_drv_pci_host *host_controller; - }; - - /* Register access */ -@@ -173,4 +204,7 @@ extern void __devinit bcma_core_pci_init - extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, - struct bcma_device *core, bool enable); - -+extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); -+extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); -+ - #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ ---- a/include/linux/bcma/bcma_regs.h -+++ b/include/linux/bcma/bcma_regs.h -@@ -56,4 +56,31 @@ - #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ - #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ - -+/* SiliconBackplane Address Map. -+ * All regions may not exist on all chips. -+ */ -+#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ -+#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) -+#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ -+#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ -+ -+ -+#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ -+#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ -+#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), low 32 bits -+ */ -+#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+ -+#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ -+#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ -+#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 -+ * (2 ZettaBytes), high 32 bits -+ */ -+ - #endif /* LINUX_BCMA_REGS_H_ */ diff --git a/target/linux/brcm47xx/patches-3.2/045-bcma-add-bus-num-counter.patch b/target/linux/brcm47xx/patches-3.2/045-bcma-add-bus-num-counter.patch deleted file mode 100644 index 14d112746a..0000000000 --- a/target/linux/brcm47xx/patches-3.2/045-bcma-add-bus-num-counter.patch +++ /dev/null @@ -1,59 +0,0 @@ -From eecd733c14952b074d7488934a4f3dc83c9c426b Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 14 Jan 2012 16:29:51 +0100 -Subject: [PATCH 28/32] bcma: add bus num counter - -If we have two bcma buses on one computer the second will not work -without this patch. Now each bus gets an own number. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/main.c | 12 +++++++++++- - include/linux/bcma/bcma.h | 1 + - 2 files changed, 12 insertions(+), 1 deletions(-) - ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -13,6 +13,12 @@ - MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); - MODULE_LICENSE("GPL"); - -+/* contains the number the next bus should get. */ -+static unsigned int bcma_bus_next_num = 0; -+ -+/* bcma_buses_mutex locks the bcma_bus_next_num */ -+static DEFINE_MUTEX(bcma_buses_mutex); -+ - static int bcma_bus_match(struct device *dev, struct device_driver *drv); - static int bcma_device_probe(struct device *dev); - static int bcma_device_remove(struct device *dev); -@@ -93,7 +99,7 @@ static int bcma_register_cores(struct bc - - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; -- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); -+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); - - switch (bus->hosttype) { - case BCMA_HOSTTYPE_PCI: -@@ -137,6 +143,10 @@ int __devinit bcma_bus_register(struct b - int err; - struct bcma_device *core; - -+ mutex_lock(&bcma_buses_mutex); -+ bus->num = bcma_bus_next_num++; -+ mutex_unlock(&bcma_buses_mutex); -+ - /* Scan for devices (cores) */ - err = bcma_bus_scan(bus); - if (err) { ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -196,6 +196,7 @@ struct bcma_bus { - struct list_head cores; - u8 nr_cores; - u8 init_done:1; -+ u8 num; - - struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; diff --git a/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch b/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch deleted file mode 100644 index 3ae5711535..0000000000 --- a/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch +++ /dev/null @@ -1,62 +0,0 @@ -From 1cd3d0de72e42161fe0df355c5429459265aeef0 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 14 Jan 2012 16:11:17 +0100 -Subject: [PATCH 30/32] bcma: add extra sprom check - -This check is needed on the BCM43224 device as it says in the -capabilities it has an sprom but is extra check says it has not. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/sprom.c | 8 ++++++++ - include/linux/bcma/bcma_driver_chipcommon.h | 16 ++++++++++++++++ - 2 files changed, 24 insertions(+), 0 deletions(-) - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -209,6 +209,7 @@ int bcma_sprom_get(struct bcma_bus *bus) - { - u16 offset; - u16 *sprom; -+ u32 sromctrl; - int err = 0; - - if (!bus->drv_cc.core) -@@ -217,6 +218,12 @@ int bcma_sprom_get(struct bcma_bus *bus) - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return -ENOENT; - -+ if (bus->drv_cc.core->id.rev >= 32) { -+ sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); -+ if (!(sromctrl & BCMA_CC_SROM_CONTROL_PRESENT)) -+ return -ENOENT; -+ } -+ - sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), - GFP_KERNEL); - if (!sprom) ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -239,6 +239,22 @@ - #define BCMA_CC_FLASH_CFG 0x0128 - #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ - #define BCMA_CC_FLASH_WAITCNT 0x012C -+#define BCMA_CC_SROM_CONTROL 0x0190 -+#define BCMA_CC_SROM_CONTROL_START 0x80000000 -+#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 -+#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 -+#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 -+#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 -+#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 -+#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 -+#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 -+#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 -+#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 -+#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 -+#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 -+#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 -+#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 -+#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 - /* 0x1E0 is defined as shared BCMA_CLKCTLST */ - #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ - #define BCMA_CC_UART0_DATA 0x0300 diff --git a/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch b/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch index 72463d454a..77062c3dab 100644 --- a/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch +++ b/target/linux/brcm47xx/patches-3.2/047-bcma-add-new-PCI-ID.patch @@ -14,7 +14,7 @@ Signed-off-by: Hauke Mehrtens --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c -@@ -278,6 +278,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ +@@ -269,6 +269,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, diff --git a/target/linux/brcm47xx/patches-3.2/051-ssb-fix-cardbus-in-hostmode.patch b/target/linux/brcm47xx/patches-3.2/051-ssb-fix-cardbus-in-hostmode.patch deleted file mode 100644 index d26807f3eb..0000000000 --- a/target/linux/brcm47xx/patches-3.2/051-ssb-fix-cardbus-in-hostmode.patch +++ /dev/null @@ -1,22 +0,0 @@ -From 7b90e7040b9783b91a4e2baf72ac32d3a00f9f2d Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sat, 21 Jan 2012 11:18:25 +0100 -Subject: [PATCH 31/34] ssb: fix cardbus in hostmode - - -Signed-off-by: Hauke Mehrtens ---- - drivers/ssb/driver_pcicore.c | 2 +- - 1 files changed, 1 insertions(+), 1 deletions(-) - ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -75,7 +75,7 @@ static u32 get_cfgspace_addr(struct ssb_ - u32 tmp; - - /* We do only have one cardbus device behind the bridge. */ -- if (pc->cardbusmode && (dev >= 1)) -+ if (pc->cardbusmode && (dev > 1)) - goto out; - - if (bus == 0) { diff --git a/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch b/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch index 97e3f9c34a..7e40fc80b7 100644 --- a/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch +++ b/target/linux/brcm47xx/patches-3.2/052-bcma-complete-workaround-for-BCMA43224.patch @@ -12,7 +12,7 @@ Signed-off-by: Hauke Mehrtens --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -141,12 +141,19 @@ void bcma_pmu_workarounds(struct bcma_dr +@@ -142,12 +142,19 @@ void bcma_pmu_workarounds(struct bcma_dr /* BCM4331 workaround is SPROM-related, we put it in sprom.c */ break; case 43224: @@ -38,7 +38,7 @@ Signed-off-by: Hauke Mehrtens case 43225: --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -374,6 +374,11 @@ +@@ -382,6 +382,11 @@ #define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ #define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ diff --git a/target/linux/brcm47xx/patches-3.2/053-bcma-log-the-id-rev-and-pkg-of-the-chip-found.patch b/target/linux/brcm47xx/patches-3.2/053-bcma-log-the-id-rev-and-pkg-of-the-chip-found.patch deleted file mode 100644 index ce16cac3cb..0000000000 --- a/target/linux/brcm47xx/patches-3.2/053-bcma-log-the-id-rev-and-pkg-of-the-chip-found.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 293fcc92dae1284c35a3bb51e7f9eb13b52e58fe Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Tue, 31 Jan 2012 23:36:44 +0100 -Subject: [PATCH 2/4] bcma: log the id, rev and pkg of the chip found - -This makes us see what type of hardware someone uses by the dmesg -output. - -Signed-off-by: Hauke Mehrtens ---- - drivers/bcma/scan.c | 10 +++++++--- - 1 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -364,6 +364,7 @@ static int bcma_get_next_core(struct bcm - void bcma_init_bus(struct bcma_bus *bus) - { - s32 tmp; -+ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); - - if (bus->init_done) - return; -@@ -374,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) - bcma_scan_switch_core(bus, BCMA_ADDR_BASE); - - tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; -+ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", -+ chipinfo->id, chipinfo->rev, chipinfo->pkg); -+ - bus->init_done = true; - } - diff --git a/target/linux/brcm47xx/patches-3.2/054-ssb-log-the-id-rev-and-pkg-of-the-chip-found.patch b/target/linux/brcm47xx/patches-3.2/054-ssb-log-the-id-rev-and-pkg-of-the-chip-found.patch deleted file mode 100644 index a5a8bc4c76..0000000000 --- a/target/linux/brcm47xx/patches-3.2/054-ssb-log-the-id-rev-and-pkg-of-the-chip-found.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 7ddcc963030bbc82add2efbd49e696ae8aff3ae6 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Tue, 31 Jan 2012 23:38:36 +0100 -Subject: [PATCH 3/4] ssb: log the id, rev and pkg of the chip found - -This makes us see what type of hardware someone uses by the dmesg -output. - -Signed-off-by: Hauke Mehrtens ---- - drivers/ssb/scan.c | 3 +++ - 1 files changed, 3 insertions(+), 0 deletions(-) - ---- a/drivers/ssb/scan.c -+++ b/drivers/ssb/scan.c -@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, - bus->chip_package = 0; - } - } -+ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " -+ "package 0x%02X\n", bus->chip_id, bus->chip_rev, -+ bus->chip_package); - if (!bus->nr_devices) - bus->nr_devices = chipid_to_nrcores(bus->chip_id); - if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { diff --git a/target/linux/brcm47xx/patches-3.2/190-ssb-sprom-fix-some-sizes-signedness.patch b/target/linux/brcm47xx/patches-3.2/190-ssb-sprom-fix-some-sizes-signedness.patch deleted file mode 100644 index de251f451a..0000000000 --- a/target/linux/brcm47xx/patches-3.2/190-ssb-sprom-fix-some-sizes-signedness.patch +++ /dev/null @@ -1,39 +0,0 @@ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -33,8 +33,8 @@ struct ssb_sprom { - u8 et1mdcport; /* MDIO for enet1 */ - u16 board_rev; /* Board revision number from SPROM. */ - u8 country_code; /* Country Code */ -- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ -+ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ - u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ - u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ - u16 pa0b0; -@@ -53,10 +53,10 @@ struct ssb_sprom { - u8 gpio1; /* GPIO pin 1 */ - u8 gpio2; /* GPIO pin 2 */ - u8 gpio3; /* GPIO pin 3 */ -- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -+ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ - u8 itssi_a; /* Idle TSSI Target for A-PHY */ - u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u8 tri2g; /* 2.4GHz TX isolation */ -@@ -67,8 +67,8 @@ struct ssb_sprom { - u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ - u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ - u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ -- u8 rxpo2g; /* 2GHz RX power offset */ -- u8 rxpo5g; /* 5GHz RX power offset */ -+ s8 rxpo2g; /* 2GHz RX power offset */ -+ s8 rxpo5g; /* 5GHz RX power offset */ - u8 rssisav2g; /* 2GHz RSSI params */ - u8 rssismc2g; - u8 rssismf2g; diff --git a/target/linux/brcm47xx/patches-3.2/192-ssb-fix-per-path-sprom-vars.patch b/target/linux/brcm47xx/patches-3.2/192-ssb-fix-per-path-sprom-vars.patch deleted file mode 100644 index 56357e7ebf..0000000000 --- a/target/linux/brcm47xx/patches-3.2/192-ssb-fix-per-path-sprom-vars.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -19,7 +19,7 @@ struct ssb_driver; - struct ssb_sprom_core_pwr_info { - u8 itssi_2g, itssi_5g; - u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -- u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; -+ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; - }; - - struct ssb_sprom { diff --git a/target/linux/brcm47xx/patches-3.2/193-ssb-add-alpha2.patch b/target/linux/brcm47xx/patches-3.2/193-ssb-add-alpha2.patch deleted file mode 100644 index ab01516d30..0000000000 --- a/target/linux/brcm47xx/patches-3.2/193-ssb-add-alpha2.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -33,6 +33,7 @@ struct ssb_sprom { - u8 et1mdcport; /* MDIO for enet1 */ - u16 board_rev; /* Board revision number from SPROM. */ - u8 country_code; /* Country Code */ -+ char alpha2[2]; /* Country Code as two chars like EU or US */ - u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ - u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ - u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ diff --git a/target/linux/brcm47xx/patches-3.2/194-ssb-add-some-missing-sprom-attributes.patch b/target/linux/brcm47xx/patches-3.2/194-ssb-add-some-missing-sprom-attributes.patch deleted file mode 100644 index 21893efb88..0000000000 --- a/target/linux/brcm47xx/patches-3.2/194-ssb-add-some-missing-sprom-attributes.patch +++ /dev/null @@ -1,93 +0,0 @@ - ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -32,6 +32,8 @@ struct ssb_sprom { - u8 et0mdcport; /* MDIO for enet0 */ - u8 et1mdcport; /* MDIO for enet1 */ - u16 board_rev; /* Board revision number from SPROM. */ -+ u16 board_num; /* Board number from SPROM. */ -+ u16 board_type; /* Board type from SPROM. */ - u8 country_code; /* Country Code */ - char alpha2[2]; /* Country Code as two chars like EU or US */ - u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -@@ -112,7 +114,79 @@ struct ssb_sprom { - } ghz5; - } fem; - -- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ -+ u16 mcs2gpo[8]; -+ u16 mcs5gpo[8]; -+ u16 mcs5glpo[8]; -+ u16 mcs5ghpo[8]; -+ u8 opo; -+ -+ u8 rxgainerr2ga[3]; -+ u8 rxgainerr5gla[3]; -+ u8 rxgainerr5gma[3]; -+ u8 rxgainerr5gha[3]; -+ u8 rxgainerr5gua[3]; -+ -+ u8 noiselvl2ga[3]; -+ u8 noiselvl5gla[3]; -+ u8 noiselvl5gma[3]; -+ u8 noiselvl5gha[3]; -+ u8 noiselvl5gua[3]; -+ -+ u8 regrev; -+ u8 txchain; -+ u8 rxchain; -+ u8 antswitch; -+ u16 cddpo; -+ u16 stbcpo; -+ u16 bw40po; -+ u16 bwduppo; -+ -+ u8 tempthresh; -+ u8 tempoffset; -+ u16 rawtempsense; -+ u8 measpower; -+ u8 tempsense_slope; -+ u8 tempcorrx; -+ u8 tempsense_option; -+ u8 freqoffset_corr; -+ u8 iqcal_swp_dis; -+ u8 hw_iqcal_en; -+ u8 elna2g; -+ u8 elna5g; -+ u8 phycal_tempdelta; -+ u8 temps_period; -+ u8 temps_hysteresis; -+ u8 measpower1; -+ u8 measpower2; -+ u8 pcieingress_war; -+ -+ /* power per rate from sromrev 9 */ -+ u16 cckbw202gpo; -+ u16 cckbw20ul2gpo; -+ u32 legofdmbw202gpo; -+ u32 legofdmbw20ul2gpo; -+ u32 legofdmbw205glpo; -+ u32 legofdmbw20ul5glpo; -+ u32 legofdmbw205gmpo; -+ u32 legofdmbw20ul5gmpo; -+ u32 legofdmbw205ghpo; -+ u32 legofdmbw20ul5ghpo; -+ u32 mcsbw202gpo; -+ u32 mcsbw20ul2gpo; -+ u32 mcsbw402gpo; -+ u32 mcsbw205glpo; -+ u32 mcsbw20ul5glpo; -+ u32 mcsbw405glpo; -+ u32 mcsbw205gmpo; -+ u32 mcsbw20ul5gmpo; -+ u32 mcsbw405gmpo; -+ u32 mcsbw205ghpo; -+ u32 mcsbw20ul5ghpo; -+ u32 mcsbw405ghpo; -+ u16 mcs32po; -+ u16 legofdm40duppo; -+ u8 sar2g; -+ u8 sar5g; - }; - - /* Information about the PCB the circuitry is soldered on. */ diff --git a/target/linux/brcm47xx/patches-3.2/195-bcma-export-bcma_find_core.patch b/target/linux/brcm47xx/patches-3.2/195-bcma-export-bcma_find_core.patch deleted file mode 100644 index 79e32a2414..0000000000 --- a/target/linux/brcm47xx/patches-3.2/195-bcma-export-bcma_find_core.patch +++ /dev/null @@ -1,30 +0,0 @@ - ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -61,7 +61,7 @@ static struct bus_type bcma_bus_type = { - .dev_attrs = bcma_device_attrs, - }; - --static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) -+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) - { - struct bcma_device *core; - -@@ -71,6 +71,7 @@ static struct bcma_device *bcma_find_cor - } - return NULL; - } -+EXPORT_SYMBOL_GPL(bcma_find_core); - - static void bcma_release_core_dev(struct device *dev) - { ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -285,6 +285,7 @@ static inline void bcma_maskset16(struct - bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); - } - -+extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); - extern bool bcma_core_is_enabled(struct bcma_device *core); - extern void bcma_core_disable(struct bcma_device *core, u32 flags); - extern int bcma_core_enable(struct bcma_device *core, u32 flags); diff --git a/target/linux/brcm47xx/patches-3.2/196-bcma-add-support-for-sprom-not-found-on-the-device.patch b/target/linux/brcm47xx/patches-3.2/196-bcma-add-support-for-sprom-not-found-on-the-device.patch deleted file mode 100644 index 296e10ae10..0000000000 --- a/target/linux/brcm47xx/patches-3.2/196-bcma-add-support-for-sprom-not-found-on-the-device.patch +++ /dev/null @@ -1,125 +0,0 @@ - ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -2,6 +2,8 @@ - * Broadcom specific AMBA - * SPROM reading - * -+ * Copyright 2011, 2012, Hauke Mehrtens -+ * - * Licensed under the GNU/GPL. See COPYING for details. - */ - -@@ -16,6 +18,45 @@ - - #define SPOFF(offset) ((offset) / sizeof(u16)) - -+static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); -+ -+/** -+ * bcma_arch_register_fallback_sprom - Registers a method providing a -+ * fallback SPROM if no SPROM is found. -+ * -+ * @sprom_callback: The callback function. -+ * -+ * With this function the architecture implementation may register a -+ * callback handler which fills the SPROM data structure. The fallback is -+ * used for PCI based BCMA devices, where no valid SPROM can be found -+ * in the shadow registers and to provide the SPROM for SoCs where BCMA is -+ * to controll the system bus. -+ * -+ * This function is useful for weird architectures that have a half-assed -+ * BCMA device hardwired to their PCI bus. -+ * -+ * This function is available for architecture code, only. So it is not -+ * exported. -+ */ -+int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)) -+{ -+ if (get_fallback_sprom) -+ return -EEXIST; -+ get_fallback_sprom = sprom_callback; -+ -+ return 0; -+} -+ -+static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, -+ struct ssb_sprom *out) -+{ -+ if (!get_fallback_sprom) -+ return -ENOENT; -+ -+ return get_fallback_sprom(bus, out); -+} -+ - /************************************************** - * R/W ops. - **************************************************/ -@@ -205,23 +246,43 @@ static void bcma_sprom_extract_r8(struct - SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; - } - -+static bool bcma_is_sprom_available(struct bcma_bus *bus) -+{ -+ u32 sromctrl; -+ -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return false; -+ -+ if (bus->drv_cc.core->id.rev >= 32) { -+ sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); -+ return sromctrl & BCMA_CC_SROM_CONTROL_PRESENT; -+ } -+ return true; -+} -+ - int bcma_sprom_get(struct bcma_bus *bus) - { - u16 offset; - u16 *sprom; -- u32 sromctrl; - int err = 0; - - if (!bus->drv_cc.core) - return -EOPNOTSUPP; - -- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -- return -ENOENT; -- -- if (bus->drv_cc.core->id.rev >= 32) { -- sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL); -- if (!(sromctrl & BCMA_CC_SROM_CONTROL_PRESENT)) -- return -ENOENT; -+ if (!bcma_is_sprom_available(bus)) { -+ /* -+ * Maybe there is no SPROM on the device? -+ * Now we ask the arch code if there is some sprom -+ * available for this device in some other storage. -+ */ -+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); -+ if (err) { -+ pr_warn("Using fallback SPROM failed (err %d)\n", err); -+ } else { -+ pr_debug("Using SPROM revision %d provided by" -+ " platform.\n", bus->sprom.revision); -+ return 0; -+ } - } - - sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), ---- a/include/linux/bcma/bcma.h -+++ b/include/linux/bcma/bcma.h -@@ -177,6 +177,12 @@ int __bcma_driver_register(struct bcma_d - - extern void bcma_driver_unregister(struct bcma_driver *drv); - -+/* Set a fallback SPROM. -+ * See kdoc at the function definition for complete documentation. */ -+extern int bcma_arch_register_fallback_sprom( -+ int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)); -+ - struct bcma_bus { - /* The MMIO area. */ - void __iomem *mmio; diff --git a/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch b/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch index 174f9a23de..6ec7bd3858 100644 --- a/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch +++ b/target/linux/brcm47xx/patches-3.2/199-MIPS-BCM47XX-move-and-extend-sprom-parsing.patch @@ -344,8 +344,8 @@ + nvram_read_u8(prefix, NULL, "ledbh3", &sprom->gpio3, 0xff); + nvram_read_u8(prefix, NULL, "aa2g", &sprom->ant_available_bg, 0); + nvram_read_u8(prefix, NULL, "aa5g", &sprom->ant_available_a, 0); -+ nvram_read_s8(prefix, NULL, "ag0", &sprom->antenna_gain.ghz24.a0, 0); -+ nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.ghz24.a1, 0); ++ nvram_read_s8(prefix, NULL, "ag0", &sprom->antenna_gain.a0, 0); ++ nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0); + nvram_read_alpha2(prefix, "ccode", &sprom->alpha2); +} + @@ -428,8 +428,8 @@ + &sprom->boardflags2_hi); + nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0); + nvram_read_u8(prefix, NULL, "regrev", &sprom->regrev, 0); -+ nvram_read_s8(prefix, NULL, "ag2", &sprom->antenna_gain.ghz24.a2, 0); -+ nvram_read_s8(prefix, NULL, "ag3", &sprom->antenna_gain.ghz24.a3, 0); ++ nvram_read_s8(prefix, NULL, "ag2", &sprom->antenna_gain.a2, 0); ++ nvram_read_s8(prefix, NULL, "ag3", &sprom->antenna_gain.a3, 0); + nvram_read_u8(prefix, NULL, "txchain", &sprom->txchain, 0xf); + nvram_read_u8(prefix, NULL, "rxchain", &sprom->rxchain, 0xf); + nvram_read_u8(prefix, NULL, "antswitch", &sprom->antswitch, 0xff); diff --git a/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch b/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch deleted file mode 100644 index 1998bbef09..0000000000 --- a/target/linux/brcm47xx/patches-3.2/220-bcm5354.patch +++ /dev/null @@ -1,134 +0,0 @@ -From 6d174f732e198aae8583cc5414b11b988bfd37a9 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Mon, 30 Jan 2012 22:44:15 +0100 -Subject: [PATCH 4/4] ssb: add support for bcm5354 - -This patch adds support the the BCM5354 SoC. -It has a PMU and a constant not configurable clock. - -Signed-off-by: Hauke Mehrtens ---- - drivers/ssb/driver_chipcommon_pmu.c | 48 +++++++++++++++++++++++++++++++--- - drivers/ssb/driver_mipscore.c | 3 ++ - drivers/ssb/main.c | 3 ++ - drivers/ssb/ssb_private.h | 4 +++ - 4 files changed, 53 insertions(+), 5 deletions(-) - ---- a/drivers/ssb/driver_chipcommon_pmu.c -+++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -13,6 +13,9 @@ - #include - #include - #include -+#ifdef CONFIG_BCM47XX -+#include -+#endif - - #include "ssb_private.h" - -@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s - u32 pmuctl, tmp, pllctl; - unsigned int i; - -- if ((bus->chip_id == 0x5354) && !crystalfreq) { -- /* The 5354 crystal freq is 25MHz */ -- crystalfreq = 25000; -- } - if (crystalfreq) - e = pmu0_plltab_find_entry(crystalfreq); - if (!e) -@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_ - u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ - - if (bus->bustype == SSB_BUSTYPE_SSB) { -- /* TODO: The user may override the crystal frequency. */ -+#ifdef CONFIG_BCM47XX -+ char buf[20]; -+ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) -+ crystalfreq = simple_strtoul(buf, NULL, 0); -+#endif - } - - switch (bus->chip_id) { -@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_ - ssb_pmu1_pllinit_r0(cc, crystalfreq); - break; - case 0x4328: -+ ssb_pmu0_pllinit_r0(cc, crystalfreq); -+ break; - case 0x5354: -+ if (crystalfreq == 0) -+ crystalfreq = 25000; - ssb_pmu0_pllinit_r0(cc, crystalfreq); - break; - case 0x4322: -@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch - - EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); - EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); -+ -+u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ -+ return 240000000; -+ default: -+ ssb_printk(KERN_ERR PFX -+ "ERROR: PMU cpu clock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} -+ -+u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) -+{ -+ struct ssb_bus *bus = cc->dev->bus; -+ -+ switch (bus->chip_id) { -+ case 0x5354: -+ return 120000000; -+ default: -+ ssb_printk(KERN_ERR PFX -+ "ERROR: PMU controlclock unknown for device %04X\n", -+ bus->chip_id); -+ return 0; -+ } -+} ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -232,6 +232,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m - struct ssb_bus *bus = mcore->dev->bus; - u32 pll_type, n, m, rate = 0; - -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_cpu_clock(&bus->chipco); -+ - if (bus->extif.dev) { - ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); - } else if (bus->chipco.dev) { ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1094,6 +1094,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) - u32 plltype; - u32 clkctl_n, clkctl_m; - -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_controlclock(&bus->chipco); -+ - if (ssb_extif_available(&bus->extif)) - ssb_extif_get_clockcontrol(&bus->extif, &plltype, - &clkctl_n, &clkctl_m); ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -211,4 +211,8 @@ static inline void b43_pci_ssb_bridge_ex - } - #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ - -+/* driver_chipcommon_pmu.c */ -+extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); -+extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); -+ - #endif /* LINUX_SSB_PRIVATE_H_ */ diff --git a/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch b/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch index 457bf93646..3a2d512dc7 100644 --- a/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch +++ b/target/linux/brcm47xx/patches-3.2/232-bcma_account_for_variable_pci_memory.patch @@ -1,6 +1,6 @@ --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -490,8 +490,9 @@ void __devinit bcma_core_pci_hostmode_in +@@ -491,8 +491,9 @@ void __devinit bcma_core_pci_hostmode_in /* Ok, ready to run, register it to the system. * The following needs change, if we want to port hostmode * to non-MIPS platform. */ diff --git a/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch b/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch index d77f30df68..adaadcc031 100644 --- a/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch +++ b/target/linux/brcm47xx/patches-3.2/234-bcma-always-map-4-bytes.patch @@ -1,6 +1,6 @@ --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c -@@ -118,7 +118,7 @@ static int bcma_extpci_read_config(struc +@@ -119,7 +119,7 @@ static int bcma_extpci_read_config(struc if (unlikely(!addr)) goto out; err = -ENOMEM; @@ -9,7 +9,7 @@ if (!mmio) goto out; -@@ -170,7 +170,7 @@ static int bcma_extpci_write_config(stru +@@ -171,7 +171,7 @@ static int bcma_extpci_write_config(stru addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xfc); @@ -18,7 +18,7 @@ if (!mmio) goto out; } -@@ -179,7 +179,7 @@ static int bcma_extpci_write_config(stru +@@ -180,7 +180,7 @@ static int bcma_extpci_write_config(stru if (unlikely(!addr)) goto out; err = -ENOMEM; diff --git a/target/linux/brcm47xx/patches-3.2/235-bcma-fix-memleak.patch b/target/linux/brcm47xx/patches-3.2/235-bcma-fix-memleak.patch deleted file mode 100644 index 14d795e706..0000000000 --- a/target/linux/brcm47xx/patches-3.2/235-bcma-fix-memleak.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -458,15 +458,18 @@ int bcma_bus_scan(struct bcma_bus *bus) - core->bus = bus; - - err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -- if (err == -ENODEV) { -- core_num++; -- continue; -- } else if (err == -ENXIO) -- continue; -- else if (err == -ESPIPE) -- break; -- else if (err < 0) -+ if (err < 0) { -+ kfree(core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) { -+ continue; -+ } else if (err == -ESPIPE) { -+ break; -+ } - return err; -+ } - - core->core_index = core_num++; - bus->nr_cores++; diff --git a/target/linux/generic/patches-2.6.30/025-bcma_backport.patch b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch index a95db6eb92..0ff18fb21e 100644 --- a/target/linux/generic/patches-2.6.30/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.30/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warning("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch index b27270aba5..b91f11d581 100644 --- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch @@ -225,7 +225,17 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -28,6 +31,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -247,8 +257,39 @@ struct pmu0_plltab_entry { u16 freq; /* Crystal frequency in kHz.*/ u8 xf; /* Crystal frequency value for PMU control */ -@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ +@@ -76,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -305,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -314,9 +332,19 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; ssb_pmu0_pllinit_r0(cc, crystalfreq); break; + case 0x4322: @@ -260,7 +301,7 @@ default: ssb_printk(KERN_ERR PFX "ERROR: PLL init unknown for device %04X\n", -@@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc +@@ -396,12 +424,15 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -278,7 +319,7 @@ /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF -@@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc +@@ -480,9 +511,9 @@ static void ssb_pmu_resources_init(struc chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); } @@ -289,7 +330,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -494,15 +525,122 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -390,6 +431,37 @@ + +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -574,7 +646,17 @@ } static void ssb_mips_serial_init(struct ssb_mipscore *mcore) -@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -152,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { +@@ -197,17 +256,23 @@ void ssb_mipscore_init(struct ssb_mipsco /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ for (irq = 2, i = 0; i < bus->nr_devices; i++) { @@ -601,7 +683,7 @@ case SSB_DEV_PCI: case SSB_DEV_ETHERNET: case SSB_DEV_ETHERNET_GBIT: -@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -218,8 +283,14 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); break; } @@ -639,6 +721,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, @@ -1098,27 +1189,7 @@ int ssb_for_each_bus_call(unsigned long data, int (*func)(struct ssb_bus *bus, unsigned long data)) { -@@ -120,6 +142,19 @@ static void ssb_device_put(struct ssb_de - put_device(dev->dev); - } - -+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) -+{ -+ if (drv) -+ get_driver(&drv->drv); -+ return drv; -+} -+ -+static inline void ssb_driver_put(struct ssb_driver *drv) -+{ -+ if (drv) -+ put_driver(&drv->drv); -+} -+ - static int ssb_device_resume(struct device *dev) - { - struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -190,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -190,90 +212,78 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -1176,16 +1247,15 @@ - continue; - drv = drv_to_ssb_drv(dev->dev->driver); - if (!drv) -+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); -+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { -+ ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) continue; - err = drv->suspend(dev, state); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", - dev_name(dev->dev)); - goto err_unwind; - } +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; } @@ -1252,7 +1322,6 @@ + dev_name(sdev->dev)); + result = err; } -+ ssb_driver_put(sdrv); + ssb_device_put(sdev); } @@ -1261,7 +1330,7 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -360,6 +386,35 @@ static int ssb_device_uevent(struct devi +@@ -360,6 +370,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -1297,7 +1366,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -369,6 +424,7 @@ static struct bus_type ssb_bustype = { +@@ -369,6 +408,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -1305,7 +1374,7 @@ }; static void ssb_buses_lock(void) -@@ -461,6 +517,7 @@ static int ssb_devices_register(struct s +@@ -461,6 +501,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -1313,7 +1382,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: -@@ -469,8 +526,14 @@ static int ssb_devices_register(struct s +@@ -469,8 +510,14 @@ static int ssb_devices_register(struct s dev->parent = &bus->host_pcmcia->dev; #endif break; @@ -1328,7 +1397,7 @@ break; } -@@ -497,7 +560,7 @@ error: +@@ -497,7 +544,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -1337,7 +1406,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -708,9 +771,9 @@ out: +@@ -708,9 +755,9 @@ out: return err; } @@ -1350,7 +1419,7 @@ { int err; -@@ -724,12 +787,18 @@ static int ssb_bus_register(struct ssb_b +@@ -724,12 +771,18 @@ static int ssb_bus_register(struct ssb_b err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) goto out; @@ -1370,7 +1439,7 @@ /* Init PCI-host device (if any) */ err = ssb_pci_init(bus); -@@ -776,6 +845,8 @@ err_pci_exit: +@@ -776,6 +829,8 @@ err_pci_exit: ssb_pci_exit(bus); err_unmap: ssb_iounmap(bus); @@ -1379,7 +1448,7 @@ err_disable_xtal: ssb_buses_unlock(); ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); -@@ -783,8 +854,8 @@ err_disable_xtal: +@@ -783,8 +838,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -1390,7 +1459,7 @@ { int err; -@@ -796,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -796,6 +851,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -1400,7 +1469,7 @@ } return err; -@@ -804,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -804,9 +862,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -1413,7 +1482,7 @@ { int err; -@@ -825,9 +899,32 @@ int ssb_bus_pcmciabus_register(struct ss +@@ -825,9 +883,32 @@ int ssb_bus_pcmciabus_register(struct ss EXPORT_SYMBOL(ssb_bus_pcmciabus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1449,7 +1518,7 @@ { int err; -@@ -908,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -908,8 +989,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -1460,7 +1529,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1024,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -999,6 +1080,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1024,23 +1108,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -1491,7 +1570,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1099,10 +1195,10 @@ void ssb_device_enable(struct ssb_device +@@ -1099,10 +1182,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -1505,7 +1584,7 @@ { int i; u32 val; -@@ -1110,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1110,7 +1193,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -1514,7 +1593,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1127,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1127,20 +1210,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -1562,7 +1641,7 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1149,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1149,13 +1250,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -1598,7 +1677,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1272,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1272,20 +1394,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -1623,7 +1702,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1293,6 +1428,37 @@ error: +@@ -1293,6 +1415,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -1661,7 +1740,7 @@ u32 ssb_admatch_base(u32 adm) { u32 base = 0; -@@ -1358,8 +1524,10 @@ static int __init ssb_modinit(void) +@@ -1358,8 +1511,10 @@ static int __init ssb_modinit(void) ssb_buses_lock(); err = ssb_attach_queued_buses(); ssb_buses_unlock(); @@ -1673,7 +1752,7 @@ err = b43_pci_ssb_bridge_init(); if (err) { -@@ -1375,7 +1543,7 @@ static int __init ssb_modinit(void) +@@ -1375,7 +1530,7 @@ static int __init ssb_modinit(void) /* don't fail SSB init because of this */ err = 0; } @@ -1720,7 +1799,7 @@ static inline u8 ssb_crc8(u8 crc, u8 data) { -@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus +@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus int i; for (i = 0; i < bus->sprom_size; i++) @@ -1738,10 +1817,40 @@ mmiowb(); msleep(20); } -@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss - out->antenna_gain.ghz5.a3 = gain; - } +@@ -324,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -383,20 +389,52 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); ++} ++ +/* Revs 4 5 and 8 have partially shared layout */ +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) +{ @@ -1780,12 +1889,10 @@ + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); -+} -+ + } + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) - { - int i; -@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb +@@ -421,10 +459,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); @@ -1800,15 +1907,30 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -453,16 +495,16 @@ static void sprom_extract_r45(struct ssb + } -+ sprom_extract_r458(out, in); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); + /* TODO - get remaining rev 4 stuff needed */ } - +@@ -470,16 +512,24 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -1835,7 +1957,7 @@ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, SSB_SPROM8_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_ +@@ -490,24 +540,122 @@ static void sprom_extract_r8(struct ssb_ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, SSB_SPROM8_ITSSI_A_SHIFT); @@ -1890,11 +2012,21 @@ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ - SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -1951,11 +2083,10 @@ + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + sprom_extract_r458(out, in); -+ + /* TODO - get remaining rev 8 stuff needed */ } - -@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus +@@ -521,36 +669,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -2013,7 +2144,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus +@@ -564,13 +710,34 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -2051,7 +2182,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -2081,7 +2212,7 @@ err = 0; goto out_free; } -@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -602,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -2188,7 +2319,7 @@ "Could not disable SPROM write access.\n"); failed = 1; } -@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co +@@ -617,134 +617,136 @@ static int ssb_pcmcia_sprom_check_crc(co } \ } while (0) @@ -2268,14 +2399,10 @@ + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && @@ -2493,7 +2620,7 @@ } bus->mmio = NULL; bus->mapped_device = NULL; -@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct +@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct SSB_BUG_ON(1); /* Can't reach this code. */ #endif break; @@ -2526,7 +2653,17 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; -@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -303,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +@@ -339,7 +359,7 @@ int ssb_bus_scan(struct ssb_bus *bus, dev->bus = bus; dev->ops = bus->ops; @@ -2535,7 +2672,7 @@ "Core %d found: %s " "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", i, ssb_core_name(dev->id.coreid), -@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -407,6 +427,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; @@ -2554,7 +2691,7 @@ } --- /dev/null +++ b/drivers/ssb/sdio.c -@@ -0,0 +1,610 @@ +@@ -0,0 +1,606 @@ +/* + * Sonics Silicon Backplane + * SDIO-Hostbus related functions @@ -3108,14 +3245,10 @@ + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->data[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->data[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->data[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && @@ -3413,12 +3546,16 @@ static inline int b43_pci_ssb_bridge_init(void) { return 0; -@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini +@@ -156,6 +205,10 @@ static inline int b43_pci_ssb_bridge_ini static inline void b43_pci_ssb_bridge_exit(void) { } -#endif /* CONFIG_SSB_PCIHOST */ +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ ++ ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/pci_ids.h @@ -3440,23 +3577,26 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,26 +31,64 @@ struct ssb_sprom { +@@ -25,47 +31,164 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; @@ -3477,10 +3617,10 @@ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u16 boardflags_lo; /* Boardflags (low 16 bits) */ @@ -3493,8 +3633,8 @@ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ -+ u8 rxpo2g; /* 2GHz RX power offset */ -+ u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; @@ -3518,8 +3658,15 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,14 +102,23 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + * loss in the connectors is bigger than the gain. */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ @@ -3532,7 +3679,79 @@ + } ghz5; + } fem; + -+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; /* Information about the PCB the circuitry is soldered on. */ @@ -3544,7 +3763,7 @@ }; -@@ -137,7 +190,7 @@ struct ssb_device { +@@ -137,7 +260,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -3553,7 +3772,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -195,10 +248,9 @@ struct ssb_driver { +@@ -195,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -3567,7 +3786,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -208,6 +260,7 @@ enum ssb_bustype { +@@ -208,6 +330,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -3575,7 +3794,7 @@ }; /* board_vendor */ -@@ -238,20 +291,33 @@ struct ssb_bus { +@@ -238,20 +361,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -3617,7 +3836,7 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -260,7 +326,8 @@ struct ssb_bus { +@@ -260,7 +396,8 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -3627,7 +3846,7 @@ u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +373,11 @@ struct ssb_bus { +@@ -306,6 +443,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -3639,7 +3858,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +478,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -3664,7 +3883,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -612,6 +765,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -4304,3 +4523,13 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-2.6.31/025-bcma_backport.patch b/target/linux/generic/patches-2.6.31/025-bcma_backport.patch index f713e2bf9b..c29842813f 100644 --- a/target/linux/generic/patches-2.6.31/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.31/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warning("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch index 82c0ff3d96..90eadc8345 100644 --- a/target/linux/generic/patches-2.6.31/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch @@ -225,7 +225,17 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -28,6 +31,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -247,8 +257,39 @@ struct pmu0_plltab_entry { u16 freq; /* Crystal frequency in kHz.*/ u8 xf; /* Crystal frequency value for PMU control */ -@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ +@@ -76,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -305,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -314,9 +332,19 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; ssb_pmu0_pllinit_r0(cc, crystalfreq); break; + case 0x4322: @@ -260,7 +301,7 @@ default: ssb_printk(KERN_ERR PFX "ERROR: PLL init unknown for device %04X\n", -@@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc +@@ -396,12 +424,15 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -278,7 +319,7 @@ /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF -@@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc +@@ -480,9 +511,9 @@ static void ssb_pmu_resources_init(struc chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); } @@ -289,7 +330,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -494,15 +525,122 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -390,6 +431,37 @@ + +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -454,7 +526,17 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { +@@ -270,7 +273,6 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); } break; @@ -462,7 +544,7 @@ case SSB_DEV_PCI: case SSB_DEV_ETHERNET: case SSB_DEV_ETHERNET_GBIT: -@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -281,6 +283,10 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); break; } @@ -496,6 +578,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, @@ -955,27 +1046,7 @@ int ssb_for_each_bus_call(unsigned long data, int (*func)(struct ssb_bus *bus, unsigned long data)) { -@@ -120,6 +142,19 @@ static void ssb_device_put(struct ssb_de - put_device(dev->dev); - } - -+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) -+{ -+ if (drv) -+ get_driver(&drv->drv); -+ return drv; -+} -+ -+static inline void ssb_driver_put(struct ssb_driver *drv) -+{ -+ if (drv) -+ put_driver(&drv->drv); -+} -+ - static int ssb_device_resume(struct device *dev) - { - struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -190,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -190,90 +212,78 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -1033,16 +1104,15 @@ - continue; - drv = drv_to_ssb_drv(dev->dev->driver); - if (!drv) -+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); -+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { -+ ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) continue; - err = drv->suspend(dev, state); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", - dev_name(dev->dev)); - goto err_unwind; - } +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; } @@ -1109,7 +1179,6 @@ + dev_name(sdev->dev)); + result = err; } -+ ssb_driver_put(sdrv); + ssb_device_put(sdev); } @@ -1118,7 +1187,7 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -360,6 +386,35 @@ static int ssb_device_uevent(struct devi +@@ -360,6 +370,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -1154,7 +1223,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -369,6 +424,7 @@ static struct bus_type ssb_bustype = { +@@ -369,6 +408,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -1162,7 +1231,7 @@ }; static void ssb_buses_lock(void) -@@ -461,6 +517,7 @@ static int ssb_devices_register(struct s +@@ -461,6 +501,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -1170,7 +1239,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: -@@ -469,8 +526,14 @@ static int ssb_devices_register(struct s +@@ -469,8 +510,14 @@ static int ssb_devices_register(struct s dev->parent = &bus->host_pcmcia->dev; #endif break; @@ -1185,7 +1254,7 @@ break; } -@@ -497,7 +560,7 @@ error: +@@ -497,7 +544,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -1194,7 +1263,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -708,9 +771,9 @@ out: +@@ -708,9 +755,9 @@ out: return err; } @@ -1207,7 +1276,7 @@ { int err; -@@ -724,12 +787,18 @@ static int ssb_bus_register(struct ssb_b +@@ -724,12 +771,18 @@ static int ssb_bus_register(struct ssb_b err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); if (err) goto out; @@ -1227,7 +1296,7 @@ /* Init PCI-host device (if any) */ err = ssb_pci_init(bus); -@@ -776,6 +845,8 @@ err_pci_exit: +@@ -776,6 +829,8 @@ err_pci_exit: ssb_pci_exit(bus); err_unmap: ssb_iounmap(bus); @@ -1236,7 +1305,7 @@ err_disable_xtal: ssb_buses_unlock(); ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); -@@ -783,8 +854,8 @@ err_disable_xtal: +@@ -783,8 +838,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -1247,7 +1316,7 @@ { int err; -@@ -796,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -796,6 +851,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -1257,7 +1326,7 @@ } return err; -@@ -804,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -804,9 +862,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -1270,7 +1339,7 @@ { int err; -@@ -825,9 +899,32 @@ int ssb_bus_pcmciabus_register(struct ss +@@ -825,9 +883,32 @@ int ssb_bus_pcmciabus_register(struct ss EXPORT_SYMBOL(ssb_bus_pcmciabus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1306,7 +1375,7 @@ { int err; -@@ -908,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -908,8 +989,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -1317,7 +1386,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1024,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -999,6 +1080,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1024,23 +1108,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -1348,7 +1427,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1099,10 +1195,10 @@ void ssb_device_enable(struct ssb_device +@@ -1099,10 +1182,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -1362,7 +1441,7 @@ { int i; u32 val; -@@ -1110,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1110,7 +1193,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -1371,7 +1450,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1127,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1127,20 +1210,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -1419,7 +1498,7 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1149,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1149,13 +1250,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -1455,7 +1534,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1272,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1272,20 +1394,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -1480,7 +1559,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1293,6 +1428,37 @@ error: +@@ -1293,6 +1415,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -1518,7 +1597,7 @@ u32 ssb_admatch_base(u32 adm) { u32 base = 0; -@@ -1358,8 +1524,10 @@ static int __init ssb_modinit(void) +@@ -1358,8 +1511,10 @@ static int __init ssb_modinit(void) ssb_buses_lock(); err = ssb_attach_queued_buses(); ssb_buses_unlock(); @@ -1530,7 +1609,7 @@ err = b43_pci_ssb_bridge_init(); if (err) { -@@ -1375,7 +1543,7 @@ static int __init ssb_modinit(void) +@@ -1375,7 +1530,7 @@ static int __init ssb_modinit(void) /* don't fail SSB init because of this */ err = 0; } @@ -1577,7 +1656,7 @@ static inline u8 ssb_crc8(u8 crc, u8 data) { -@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus +@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus int i; for (i = 0; i < bus->sprom_size; i++) @@ -1595,10 +1674,40 @@ mmiowb(); msleep(20); } -@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss - out->antenna_gain.ghz5.a3 = gain; - } +@@ -324,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -383,20 +389,52 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); ++} ++ +/* Revs 4 5 and 8 have partially shared layout */ +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) +{ @@ -1637,12 +1746,10 @@ + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); -+} -+ + } + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) - { - int i; -@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb +@@ -421,10 +459,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); @@ -1657,15 +1764,30 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -453,16 +495,16 @@ static void sprom_extract_r45(struct ssb + } -+ sprom_extract_r458(out, in); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); + /* TODO - get remaining rev 4 stuff needed */ } - +@@ -470,16 +512,24 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -1692,7 +1814,7 @@ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, SSB_SPROM8_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_ +@@ -490,24 +540,122 @@ static void sprom_extract_r8(struct ssb_ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, SSB_SPROM8_ITSSI_A_SHIFT); @@ -1747,11 +1869,21 @@ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ - SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -1808,11 +1940,10 @@ + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + sprom_extract_r458(out, in); -+ + /* TODO - get remaining rev 8 stuff needed */ } - -@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus +@@ -521,36 +669,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1870,7 +2001,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus +@@ -564,13 +710,34 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1908,7 +2039,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1938,7 +2069,7 @@ err = 0; goto out_free; } -@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -602,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -2027,7 +2158,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co +@@ -617,136 +617,136 @@ static int ssb_pcmcia_sprom_check_crc(co } \ } while (0) @@ -2107,14 +2238,10 @@ + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && @@ -2334,7 +2461,7 @@ } bus->mmio = NULL; bus->mapped_device = NULL; -@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct +@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct SSB_BUG_ON(1); /* Can't reach this code. */ #endif break; @@ -2367,7 +2494,17 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; -@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -303,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +@@ -339,7 +359,7 @@ int ssb_bus_scan(struct ssb_bus *bus, dev->bus = bus; dev->ops = bus->ops; @@ -2376,7 +2513,7 @@ "Core %d found: %s " "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", i, ssb_core_name(dev->id.coreid), -@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -407,6 +427,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; @@ -2395,7 +2532,7 @@ } --- /dev/null +++ b/drivers/ssb/sdio.c -@@ -0,0 +1,610 @@ +@@ -0,0 +1,606 @@ +/* + * Sonics Silicon Backplane + * SDIO-Hostbus related functions @@ -2949,14 +3086,10 @@ + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->data[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->data[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->data[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->data[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && @@ -3221,12 +3354,16 @@ static inline int b43_pci_ssb_bridge_init(void) { return 0; -@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini +@@ -156,6 +205,10 @@ static inline int b43_pci_ssb_bridge_ini static inline void b43_pci_ssb_bridge_exit(void) { } -#endif /* CONFIG_SSB_PCIHOST */ +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ ++ ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/pci_ids.h @@ -3248,23 +3385,26 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,26 +31,64 @@ struct ssb_sprom { +@@ -25,47 +31,164 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ - u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ - u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; @@ -3285,10 +3425,10 @@ u8 gpio3; /* GPIO pin 3 */ - u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ - u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ u8 itssi_a; /* Idle TSSI Target for A-PHY */ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ - u16 boardflags_lo; /* Boardflags (low 16 bits) */ @@ -3301,8 +3441,8 @@ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ -+ u8 rxpo2g; /* 2GHz RX power offset */ -+ u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; @@ -3326,8 +3466,15 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,14 +102,23 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + * loss in the connectors is bigger than the gain. */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; - /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ @@ -3340,7 +3487,79 @@ + } ghz5; + } fem; + -+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; /* Information about the PCB the circuitry is soldered on. */ @@ -3352,7 +3571,7 @@ }; -@@ -137,7 +190,7 @@ struct ssb_device { +@@ -137,7 +260,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -3361,7 +3580,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -195,10 +248,9 @@ struct ssb_driver { +@@ -195,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -3375,7 +3594,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -208,6 +260,7 @@ enum ssb_bustype { +@@ -208,6 +330,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -3383,7 +3602,7 @@ }; /* board_vendor */ -@@ -238,20 +291,33 @@ struct ssb_bus { +@@ -238,20 +361,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -3425,7 +3644,7 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -260,7 +326,8 @@ struct ssb_bus { +@@ -260,7 +396,8 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -3435,7 +3654,7 @@ u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +373,11 @@ struct ssb_bus { +@@ -306,6 +443,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -3447,7 +3666,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +478,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -3472,7 +3691,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -612,6 +765,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -4112,3 +4331,13 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-2.6.32/025-bcma_backport.patch b/target/linux/generic/patches-2.6.32/025-bcma_backport.patch index 3571bd1984..97c821843e 100644 --- a/target/linux/generic/patches-2.6.32/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.32/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warning("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch index 0564fa3c76..c5492d3e96 100644 --- a/target/linux/generic/patches-2.6.32/975-ssb_update.patch +++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch @@ -164,8 +164,49 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -332,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_ +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,9 +332,19 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; ssb_pmu0_pllinit_r0(cc, crystalfreq); break; + case 0x4322: @@ -177,7 +218,7 @@ default: ssb_printk(KERN_ERR PFX "ERROR: PLL init unknown for device %04X\n", -@@ -411,12 +417,15 @@ static void ssb_pmu_resources_init(struc +@@ -411,12 +424,15 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -195,7 +236,7 @@ /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF -@@ -495,9 +504,9 @@ static void ssb_pmu_resources_init(struc +@@ -495,9 +511,9 @@ static void ssb_pmu_resources_init(struc chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); } @@ -206,7 +247,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -509,15 +525,12 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -228,6 +269,41 @@ ssb_pmu_pll_init(cc); ssb_pmu_resources_init(cc); } +@@ -600,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -292,7 +368,17 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -270,7 +270,6 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { +@@ -270,7 +273,6 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); } break; @@ -300,7 +386,7 @@ case SSB_DEV_PCI: case SSB_DEV_ETHERNET: case SSB_DEV_ETHERNET_GBIT: -@@ -281,6 +280,10 @@ void ssb_mipscore_init(struct ssb_mipsco +@@ -281,6 +283,10 @@ void ssb_mipscore_init(struct ssb_mipsco set_irq(dev, irq++); break; } @@ -334,6 +420,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore .pci_ops = &ssb_pcicore_pciops, .io_resource = &ssb_pcicore_io_resource, @@ -767,27 +862,7 @@ #include #include -@@ -140,6 +142,19 @@ static void ssb_device_put(struct ssb_de - put_device(dev->dev); - } - -+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) -+{ -+ if (drv) -+ get_driver(&drv->drv); -+ return drv; -+} -+ -+static inline void ssb_driver_put(struct ssb_driver *drv) -+{ -+ if (drv) -+ put_driver(&drv->drv); -+} -+ - static int ssb_device_resume(struct device *dev) - { - struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -210,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) +@@ -210,90 +212,78 @@ int ssb_bus_suspend(struct ssb_bus *bus) EXPORT_SYMBOL(ssb_bus_suspend); #ifdef CONFIG_SSB_SPROM @@ -842,19 +917,18 @@ - if (!dev->dev || - !dev->dev->driver || - !device_is_registered(dev->dev)) -+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); -+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { -+ ssb_device_put(sdev); - continue; +- continue; - drv = drv_to_ssb_drv(dev->dev->driver); - if (!drv) -- continue; ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; - err = drv->suspend(dev, state); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", - dev_name(dev->dev)); - goto err_unwind; - } +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; } @@ -921,7 +995,6 @@ + dev_name(sdev->dev)); + result = err; } -+ ssb_driver_put(sdrv); + ssb_device_put(sdev); } @@ -930,7 +1003,7 @@ } #endif /* CONFIG_SSB_SPROM */ -@@ -380,6 +386,35 @@ static int ssb_device_uevent(struct devi +@@ -380,6 +370,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -966,7 +1039,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -389,6 +424,7 @@ static struct bus_type ssb_bustype = { +@@ -389,6 +408,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -974,7 +1047,7 @@ }; static void ssb_buses_lock(void) -@@ -481,6 +517,7 @@ static int ssb_devices_register(struct s +@@ -481,6 +501,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -982,7 +1055,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: -@@ -490,13 +527,13 @@ static int ssb_devices_register(struct s +@@ -490,13 +511,13 @@ static int ssb_devices_register(struct s #endif break; case SSB_BUSTYPE_SDIO: @@ -998,7 +1071,7 @@ break; } -@@ -523,7 +560,7 @@ error: +@@ -523,7 +544,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -1007,7 +1080,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -734,9 +771,9 @@ out: +@@ -734,9 +755,9 @@ out: return err; } @@ -1020,7 +1093,7 @@ { int err; -@@ -817,8 +854,8 @@ err_disable_xtal: +@@ -817,8 +838,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -1031,7 +1104,7 @@ { int err; -@@ -830,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -830,6 +851,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -1041,7 +1114,7 @@ } return err; -@@ -838,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -838,9 +862,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -1054,7 +1127,7 @@ { int err; -@@ -860,8 +900,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -860,8 +884,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -1066,7 +1139,7 @@ { int err; -@@ -881,9 +922,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -881,9 +906,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -1079,7 +1152,7 @@ { int err; -@@ -964,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -964,8 +989,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -1090,7 +1163,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1080,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1055,6 +1080,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1080,23 +1108,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -1121,7 +1204,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1155,10 +1195,10 @@ void ssb_device_enable(struct ssb_device +@@ -1155,10 +1182,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -1135,7 +1218,7 @@ { int i; u32 val; -@@ -1166,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1166,7 +1193,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -1144,7 +1227,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1183,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1183,20 +1210,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -1192,7 +1275,7 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1205,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1205,13 +1250,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -1228,7 +1311,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1328,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1328,20 +1394,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -1253,7 +1336,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1349,6 +1428,37 @@ error: +@@ -1349,6 +1415,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -1319,10 +1402,40 @@ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ #define SPEX16(_outvar, _offset, _mask, _shift) \ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) -@@ -405,6 +406,46 @@ static void sprom_extract_r123(struct ss - out->antenna_gain.ghz5.a3 = gain; - } - +@@ -330,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -389,20 +389,52 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); ++} ++ +/* Revs 4 5 and 8 have partially shared layout */ +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) +{ @@ -1361,12 +1474,10 @@ + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); -+} -+ + } + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) - { - int i; -@@ -427,10 +468,14 @@ static void sprom_extract_r45(struct ssb +@@ -427,10 +459,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); @@ -1381,15 +1492,30 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -470,13 +515,21 @@ static void sprom_extract_r45(struct ssb - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -459,16 +495,16 @@ static void sprom_extract_r45(struct ssb + } -+ sprom_extract_r458(out, in); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); + /* TODO - get remaining rev 4 stuff needed */ } - +@@ -476,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -1404,10 +1530,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -560,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +@@ -549,16 +591,71 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -1464,11 +1605,10 @@ + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + sprom_extract_r458(out, in); -+ + /* TODO - get remaining rev 8 stuff needed */ } - -@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus +@@ -572,37 +669,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1527,7 +1667,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus +@@ -616,15 +710,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1545,7 +1685,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -644,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -644,7 +737,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1554,7 +1694,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -654,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -654,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1584,7 +1724,7 @@ err = 0; goto out_free; } -@@ -676,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -676,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -1673,7 +1813,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -617,136 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co +@@ -617,136 +617,136 @@ static int ssb_pcmcia_sprom_check_crc(co } \ } while (0) @@ -1753,14 +1893,10 @@ + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && @@ -1961,7 +2097,17 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; -@@ -354,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -318,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +@@ -354,7 +359,7 @@ int ssb_bus_scan(struct ssb_bus *bus, dev->bus = bus; dev->ops = bus->ops; @@ -1970,7 +2116,7 @@ "Core %d found: %s " "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", i, ssb_core_name(dev->id.coreid), -@@ -422,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -422,6 +427,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; @@ -2151,12 +2297,16 @@ static inline int b43_pci_ssb_bridge_init(void) { return 0; -@@ -196,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini +@@ -196,6 +205,10 @@ static inline int b43_pci_ssb_bridge_ini static inline void b43_pci_ssb_bridge_exit(void) { } -#endif /* CONFIG_SSB_PCIHOST */ +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ ++ ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h @@ -2168,36 +2318,57 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,8 +31,10 @@ struct ssb_sprom { +@@ -25,8 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +63,10 @@ struct ssb_sprom { +@@ -45,18 +56,22 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ + u8 txpid2g[4]; /* 2GHz TX power index */ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ - u8 rxpo2g; /* 2GHz RX power offset */ - u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -76,6 +88,8 @@ struct ssb_sprom { + u8 rssismc2g; + u8 rssismf2g; +@@ -76,26 +91,104 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -2206,10 +2377,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -88,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -2219,10 +2397,82 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -95,7 +118,7 @@ struct ssb_sprom { + /* Information about the PCB the circuitry is soldered on. */ struct ssb_boardinfo { u16 vendor; u16 type; @@ -2231,7 +2481,7 @@ }; -@@ -167,7 +190,7 @@ struct ssb_device { +@@ -167,7 +260,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -2240,7 +2490,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -225,10 +248,9 @@ struct ssb_driver { +@@ -225,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -2254,7 +2504,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -269,7 +291,8 @@ struct ssb_bus { +@@ -269,7 +361,8 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -2264,7 +2514,7 @@ struct ssb_device *mapped_device; union { /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -@@ -281,14 +304,17 @@ struct ssb_bus { +@@ -281,14 +374,17 @@ struct ssb_bus { * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock; @@ -2289,7 +2539,7 @@ /* See enum ssb_quirks */ unsigned int quirks; -@@ -300,7 +326,7 @@ struct ssb_bus { +@@ -300,7 +396,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -2298,7 +2548,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -396,7 +422,9 @@ extern bool ssb_is_sprom_available(struc +@@ -396,7 +492,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -2309,7 +2559,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -667,6 +765,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -2930,3 +3180,32 @@ * * Licensed under the GNU/GPL. See COPYING for details. * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-2.6.36/025-bcma_backport.patch b/target/linux/generic/patches-2.6.36/025-bcma_backport.patch index eb64b85826..0506caee1e 100644 --- a/target/linux/generic/patches-2.6.36/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.36/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-2.6.36/941-ssb_update.patch b/target/linux/generic/patches-2.6.36/941-ssb_update.patch index 9f8dfb8782..f549184c4b 100644 --- a/target/linux/generic/patches-2.6.36/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.36/941-ssb_update.patch @@ -17,7 +17,49 @@ #include #include #include -@@ -384,6 +385,35 @@ static int ssb_device_uevent(struct devi +@@ -140,19 +141,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -250,11 +238,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -293,7 +279,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -384,6 +369,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -53,7 +95,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -393,6 +423,7 @@ static struct bus_type ssb_bustype = { +@@ -393,6 +407,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -61,7 +103,7 @@ }; static void ssb_buses_lock(void) -@@ -528,7 +559,7 @@ error: +@@ -528,7 +543,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -70,7 +112,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -739,9 +770,9 @@ out: +@@ -739,9 +754,9 @@ out: return err; } @@ -83,7 +125,7 @@ { int err; -@@ -822,8 +853,8 @@ err_disable_xtal: +@@ -822,8 +837,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -94,7 +136,7 @@ { int err; -@@ -846,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -846,9 +861,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -107,7 +149,7 @@ { int err; -@@ -868,8 +899,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -868,8 +883,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -119,7 +161,7 @@ { int err; -@@ -889,9 +921,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -889,9 +905,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -132,7 +174,7 @@ { int err; -@@ -972,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -972,8 +988,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -143,7 +185,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1088,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1063,6 +1079,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1088,23 +1107,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -174,7 +226,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1163,10 +1194,10 @@ void ssb_device_enable(struct ssb_device +@@ -1163,10 +1181,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -188,7 +240,7 @@ { int i; u32 val; -@@ -1174,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1174,7 +1192,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -197,7 +249,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1191,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1191,20 +1209,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -245,7 +297,7 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1213,13 +1262,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1213,13 +1249,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -281,7 +333,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1262,20 +1332,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1262,20 +1319,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -306,7 +358,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1283,6 +1353,37 @@ error: +@@ -1283,6 +1340,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -355,10 +407,40 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss - out->antenna_gain.ghz5.a3 = gain; - } - +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,52 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); ++} ++ +/* Revs 4 5 and 8 have partially shared layout */ +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) +{ @@ -397,12 +479,10 @@ + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); -+} -+ + } + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) - { - int i; -@@ -428,10 +468,14 @@ static void sprom_extract_r45(struct ssb +@@ -428,10 +459,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); @@ -417,15 +497,30 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -460,16 +495,16 @@ static void sprom_extract_r45(struct ssb + } -+ sprom_extract_r458(out, in); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); + /* TODO - get remaining rev 4 stuff needed */ } - +@@ -477,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -440,10 +535,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +@@ -550,16 +591,71 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -500,11 +610,10 @@ + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + sprom_extract_r458(out, in); -+ + /* TODO - get remaining rev 8 stuff needed */ } - -@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +669,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -563,7 +672,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +710,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -581,7 +690,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +737,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -590,7 +699,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -620,7 +729,7 @@ err = 0; goto out_free; } -@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -725,7 +834,17 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; -@@ -406,10 +408,10 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -317,6 +319,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +@@ -406,10 +411,10 @@ int ssb_bus_scan(struct ssb_bus *bus, /* Ignore PCI cores on PCI-E cards. * Ignore PCI-E cores on PCI cards. */ if (dev->id.coreid == SSB_DEV_PCI) { @@ -738,7 +857,7 @@ continue; } } -@@ -421,6 +423,16 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -421,6 +426,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; @@ -764,36 +883,57 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,8 +31,10 @@ struct ssb_sprom { +@@ -25,8 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +63,10 @@ struct ssb_sprom { +@@ -45,18 +56,22 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ + u8 txpid2g[4]; /* 2GHz TX power index */ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ - u8 rxpo2g; /* 2GHz RX power offset */ - u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -76,6 +88,8 @@ struct ssb_sprom { + u8 rssismc2g; + u8 rssismf2g; +@@ -76,26 +91,104 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -802,10 +942,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -88,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -815,10 +962,82 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -95,7 +118,7 @@ struct ssb_sprom { + /* Information about the PCB the circuitry is soldered on. */ struct ssb_boardinfo { u16 vendor; u16 type; @@ -827,7 +1046,7 @@ }; -@@ -225,10 +248,9 @@ struct ssb_driver { +@@ -225,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -841,7 +1060,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -304,7 +326,7 @@ struct ssb_bus { +@@ -304,7 +396,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -850,7 +1069,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +492,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -861,7 +1080,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -871,7 +1090,15 @@ extern u32 ssb_admatch_base(u32 adm); --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h -@@ -96,16 +96,21 @@ static inline bool ssb_gige_must_flush_p +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + +@@ -96,16 +97,21 @@ static inline bool ssb_gige_must_flush_p return 0; } @@ -1215,7 +1442,53 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -417,12 +424,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -1232,6 +1505,41 @@ case 0x4322: /* We keep the default settings: * min_msk = 0xCBB +@@ -604,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -1300,6 +1608,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -1746,6 +2063,15 @@ /* core.c */ +@@ -206,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -8,7 +8,7 @@ @@ -1828,6 +2154,16 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -3,7 +3,7 @@ @@ -1850,6 +2186,25 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -677,14 +677,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/sdio.c +++ b/drivers/ssb/sdio.c @@ -6,7 +6,7 @@ @@ -1861,3 +2216,22 @@ * * Licensed under the GNU/GPL. See COPYING for details. * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && diff --git a/target/linux/generic/patches-2.6.37/020-ssb_update.patch b/target/linux/generic/patches-2.6.37/020-ssb_update.patch index c894d55dbb..f91861df90 100644 --- a/target/linux/generic/patches-2.6.37/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.37/020-ssb_update.patch @@ -17,7 +17,49 @@ #include #include #include -@@ -383,6 +384,35 @@ static int ssb_device_uevent(struct devi +@@ -139,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -249,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -292,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -383,6 +368,35 @@ static int ssb_device_uevent(struct devi ssb_dev->id.revision); } @@ -53,7 +95,7 @@ static struct bus_type ssb_bustype = { .name = "ssb", .match = ssb_bus_match, -@@ -392,6 +422,7 @@ static struct bus_type ssb_bustype = { +@@ -392,6 +406,7 @@ static struct bus_type ssb_bustype = { .suspend = ssb_device_suspend, .resume = ssb_device_resume, .uevent = ssb_device_uevent, @@ -61,7 +103,7 @@ }; static void ssb_buses_lock(void) -@@ -527,7 +558,7 @@ error: +@@ -527,7 +542,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -70,7 +112,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -738,9 +769,9 @@ out: +@@ -738,9 +753,9 @@ out: return err; } @@ -83,7 +125,7 @@ { int err; -@@ -821,8 +852,8 @@ err_disable_xtal: +@@ -821,8 +836,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -94,7 +136,7 @@ { int err; -@@ -845,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -845,9 +860,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -107,7 +149,7 @@ { int err; -@@ -867,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -867,8 +882,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -119,7 +161,7 @@ { int err; -@@ -888,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -888,9 +904,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -132,7 +174,7 @@ { int err; -@@ -971,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -971,8 +987,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -143,7 +185,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1087,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1062,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1087,23 +1106,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -174,7 +226,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1162,10 +1193,10 @@ void ssb_device_enable(struct ssb_device +@@ -1162,10 +1180,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -188,7 +240,7 @@ { int i; u32 val; -@@ -1173,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1173,7 +1191,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -197,7 +249,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1190,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1190,20 +1208,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -245,7 +297,7 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1212,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1212,13 +1248,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -281,7 +333,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1261,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1261,20 +1318,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -306,7 +358,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1282,6 +1352,37 @@ error: +@@ -1282,6 +1339,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -355,10 +407,40 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss - out->antenna_gain.ghz5.a3 = gain; - } - +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,52 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); ++} ++ +/* Revs 4 5 and 8 have partially shared layout */ +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) +{ @@ -397,12 +479,10 @@ + SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); + SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, + SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); -+} -+ + } + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) - { - int i; -@@ -428,10 +468,14 @@ static void sprom_extract_r45(struct ssb +@@ -428,10 +459,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); @@ -417,15 +497,30 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -460,16 +495,16 @@ static void sprom_extract_r45(struct ssb + } -+ sprom_extract_r458(out, in); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); + /* TODO - get remaining rev 4 stuff needed */ } - +@@ -477,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -440,10 +535,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +@@ -550,16 +591,71 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -500,11 +610,10 @@ + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); + + sprom_extract_r458(out, in); -+ + /* TODO - get remaining rev 8 stuff needed */ } - -@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +669,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -563,7 +672,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +710,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -581,7 +690,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +737,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -590,7 +699,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -620,7 +729,7 @@ err = 0; goto out_free; } -@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -725,7 +834,17 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; -@@ -405,10 +407,10 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -316,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +@@ -405,10 +410,10 @@ int ssb_bus_scan(struct ssb_bus *bus, /* Ignore PCI cores on PCI-E cards. * Ignore PCI-E cores on PCI cards. */ if (dev->id.coreid == SSB_DEV_PCI) { @@ -738,7 +857,7 @@ continue; } } -@@ -420,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus, +@@ -420,6 +425,16 @@ int ssb_bus_scan(struct ssb_bus *bus, bus->pcicore.dev = dev; #endif /* CONFIG_SSB_DRIVER_PCICORE */ break; @@ -764,36 +883,57 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,8 +31,10 @@ struct ssb_sprom { +@@ -25,8 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +63,10 @@ struct ssb_sprom { +@@ -45,18 +56,22 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ + u8 txpid2g[4]; /* 2GHz TX power index */ + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ - u8 rxpo2g; /* 2GHz RX power offset */ - u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -76,6 +88,8 @@ struct ssb_sprom { + u8 rssismc2g; + u8 rssismf2g; +@@ -76,26 +91,104 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -802,10 +942,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -88,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -815,10 +962,82 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -95,7 +118,7 @@ struct ssb_sprom { + /* Information about the PCB the circuitry is soldered on. */ struct ssb_boardinfo { u16 vendor; u16 type; @@ -827,7 +1046,7 @@ }; -@@ -225,10 +248,9 @@ struct ssb_driver { +@@ -225,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -841,7 +1060,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -304,7 +326,7 @@ struct ssb_bus { +@@ -304,7 +396,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -850,7 +1069,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +492,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -861,7 +1080,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -1187,7 +1406,53 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -417,12 +424,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -1204,6 +1469,41 @@ case 0x4322: /* We keep the default settings: * min_msk = 0xCBB +@@ -604,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -1272,6 +1572,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -1718,6 +2027,15 @@ /* core.c */ +@@ -206,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -8,7 +8,7 @@ @@ -1800,6 +2118,16 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -3,7 +3,7 @@ @@ -1822,6 +2150,25 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/sdio.c +++ b/drivers/ssb/sdio.c @@ -6,7 +6,7 @@ @@ -1833,3 +2180,32 @@ * * Licensed under the GNU/GPL. See COPYING for details. * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-2.6.37/025-bcma_backport.patch b/target/linux/generic/patches-2.6.37/025-bcma_backport.patch index c3312a2004..bd316548c2 100644 --- a/target/linux/generic/patches-2.6.37/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.37/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-2.6.38/020-ssb_update.patch b/target/linux/generic/patches-2.6.38/020-ssb_update.patch index 8269ac3447..8578f75310 100644 --- a/target/linux/generic/patches-2.6.38/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.38/020-ssb_update.patch @@ -17,7 +17,49 @@ #include #include #include -@@ -557,7 +558,7 @@ error: +@@ -139,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -249,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -292,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -557,7 +542,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -26,7 +68,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -768,9 +769,9 @@ out: +@@ -768,9 +753,9 @@ out: return err; } @@ -39,7 +81,7 @@ { int err; -@@ -851,8 +852,8 @@ err_disable_xtal: +@@ -851,8 +836,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -50,7 +92,7 @@ { int err; -@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -875,9 +860,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -63,7 +105,7 @@ { int err; -@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -897,8 +882,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -75,7 +117,7 @@ { int err; -@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -918,9 +904,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -88,7 +130,7 @@ { int err; -@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -1001,8 +987,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -99,7 +141,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1117,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1092,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1117,23 +1106,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -130,7 +182,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1192,10 +1193,10 @@ void ssb_device_enable(struct ssb_device +@@ -1192,10 +1180,10 @@ void ssb_device_enable(struct ssb_device } EXPORT_SYMBOL(ssb_device_enable); @@ -144,7 +196,7 @@ { int i; u32 val; -@@ -1203,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1203,7 +1191,7 @@ static int ssb_wait_bit(struct ssb_devic for (i = 0; i < timeout; i++) { val = ssb_read32(dev, reg); if (set) { @@ -153,7 +205,7 @@ return 0; } else { if (!(val & bitmask)) -@@ -1220,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic +@@ -1220,20 +1208,38 @@ static int ssb_wait_bit(struct ssb_devic void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) { @@ -201,7 +253,7 @@ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_RESET | -@@ -1242,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1242,13 +1248,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -237,7 +289,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1291,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1291,20 +1318,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -262,7 +314,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1312,6 +1352,37 @@ error: +@@ -1312,6 +1339,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -311,7 +363,42 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -468,10 +468,14 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -468,10 +459,14 @@ static void sprom_extract_r45(struct ssb SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); @@ -326,7 +413,28 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -519,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -500,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -519,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -341,10 +449,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -603,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +@@ -592,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -399,11 +522,10 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ + sprom_extract_r458(out, in); - /* TODO - get remaining rev 8 stuff needed */ -@@ -641,7 +706,7 @@ static int sprom_extract(struct ssb_bus +@@ -641,7 +693,7 @@ static int sprom_extract(struct ssb_bus break; default: ssb_printk(KERN_WARNING PFX "Unsupported SPROM" @@ -412,7 +534,7 @@ " v1\n", out->revision); out->revision = 1; sprom_extract_r123(out, in); -@@ -658,7 +723,6 @@ static int sprom_extract(struct ssb_bus +@@ -658,7 +710,6 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -420,7 +542,7 @@ int err; u16 *buf; -@@ -666,7 +730,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -666,7 +717,7 @@ static int ssb_pci_sprom_get(struct ssb_ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); return -ENODEV; } @@ -429,7 +551,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -703,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -703,10 +754,17 @@ static int ssb_pci_sprom_get(struct ssb_ if (err) { /* All CRC attempts failed. * Maybe there is no SPROM on the device? @@ -451,7 +573,7 @@ err = 0; goto out_free; } -@@ -724,12 +795,9 @@ out_free: +@@ -724,12 +782,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -738,7 +860,53 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -417,12 +424,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -755,6 +923,41 @@ case 0x4322: /* We keep the default settings: * min_msk = 0xCBB +@@ -604,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -823,6 +1026,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -1229,6 +1441,16 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; +@@ -316,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -2,7 +2,7 @@ @@ -1333,6 +1555,15 @@ /* core.c */ +@@ -206,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; @@ -1342,25 +1573,54 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,8 +31,10 @@ struct ssb_sprom { +@@ -25,8 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -80,6 +88,8 @@ struct ssb_sprom { +@@ -45,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -59,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -80,26 +91,104 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -1369,10 +1629,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -92,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -1382,10 +1649,82 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -99,7 +118,7 @@ struct ssb_sprom { + /* Information about the PCB the circuitry is soldered on. */ struct ssb_boardinfo { u16 vendor; u16 type; @@ -1394,7 +1733,7 @@ }; -@@ -229,10 +248,9 @@ struct ssb_driver { +@@ -229,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -1408,7 +1747,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -308,7 +326,7 @@ struct ssb_bus { +@@ -308,7 +396,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -1417,7 +1756,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc +@@ -404,7 +492,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -1428,7 +1767,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -518,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -1518,6 +1857,16 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -3,7 +3,7 @@ @@ -1540,6 +1889,25 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/sdio.c +++ b/drivers/ssb/sdio.c @@ -6,7 +6,7 @@ @@ -1551,3 +1919,32 @@ * * Licensed under the GNU/GPL. See COPYING for details. * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-2.6.38/025-bcma_backport.patch b/target/linux/generic/patches-2.6.38/025-bcma_backport.patch index 60fefaf452..db2292ad96 100644 --- a/target/linux/generic/patches-2.6.38/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.38/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-2.6.39/020-ssb_update.patch b/target/linux/generic/patches-2.6.39/020-ssb_update.patch index d89b64b9d9..404201a782 100644 --- a/target/linux/generic/patches-2.6.39/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.39/020-ssb_update.patch @@ -118,7 +118,53 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -417,12 +424,14 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -135,6 +181,41 @@ case 0x4322: /* We keep the default settings: * min_msk = 0xCBB +@@ -604,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -203,6 +284,15 @@ static inline u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -564,7 +654,49 @@ #include #include #include -@@ -557,7 +558,7 @@ error: +@@ -139,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -249,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -292,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -557,7 +542,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -573,7 +705,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -768,9 +769,9 @@ out: +@@ -768,9 +753,9 @@ out: return err; } @@ -586,7 +718,7 @@ { int err; -@@ -851,8 +852,8 @@ err_disable_xtal: +@@ -851,8 +836,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -597,7 +729,7 @@ { int err; -@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -875,9 +860,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -610,7 +742,7 @@ { int err; -@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -897,8 +882,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -622,7 +754,7 @@ { int err; -@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -918,9 +904,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -635,7 +767,7 @@ { int err; -@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -1001,8 +987,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -646,7 +778,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1117,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str +@@ -1092,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1117,23 +1106,22 @@ static u32 ssb_tmslow_reject_bitmask(str { u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; @@ -677,7 +819,7 @@ } int ssb_device_is_enabled(struct ssb_device *dev) -@@ -1260,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1260,13 +1248,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -713,7 +855,7 @@ default: __ssb_dma_not_implemented(dev); } -@@ -1309,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); +@@ -1309,20 +1318,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) { @@ -738,7 +880,7 @@ return 0; error: ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); -@@ -1330,6 +1352,37 @@ error: +@@ -1330,6 +1339,37 @@ error: } EXPORT_SYMBOL(ssb_bus_powerup); @@ -787,7 +929,63 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -802,10 +1000,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); - +@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -860,11 +1073,10 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ + sprom_extract_r458(out, in); - /* TODO - get remaining rev 8 stuff needed */ -@@ -662,7 +723,6 @@ static int sprom_extract(struct ssb_bus +@@ -662,7 +710,6 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -872,7 +1084,7 @@ int err; u16 *buf; -@@ -707,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -707,10 +754,17 @@ static int ssb_pci_sprom_get(struct ssb_ if (err) { /* All CRC attempts failed. * Maybe there is no SPROM on the device? @@ -894,7 +1106,7 @@ err = 0; goto out_free; } -@@ -728,12 +795,9 @@ out_free: +@@ -728,12 +782,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -974,6 +1186,16 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; +@@ -316,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -2,7 +2,7 @@ @@ -1069,6 +1291,15 @@ /* core.c */ +@@ -206,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; @@ -1078,25 +1309,54 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,8 +31,10 @@ struct ssb_sprom { +@@ -25,8 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -80,6 +88,8 @@ struct ssb_sprom { +@@ -45,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -59,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -80,26 +91,104 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -1105,10 +1365,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -92,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -1118,10 +1385,82 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -99,7 +118,7 @@ struct ssb_sprom { + /* Information about the PCB the circuitry is soldered on. */ struct ssb_boardinfo { u16 vendor; u16 type; @@ -1130,7 +1469,7 @@ }; -@@ -229,10 +248,9 @@ struct ssb_driver { +@@ -229,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -1144,7 +1483,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -308,7 +326,7 @@ struct ssb_bus { +@@ -308,7 +396,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -1153,7 +1492,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc +@@ -404,7 +492,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -1164,7 +1503,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -518,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -1376,6 +1715,16 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -3,7 +3,7 @@ @@ -1398,6 +1747,25 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/sdio.c +++ b/drivers/ssb/sdio.c @@ -6,7 +6,7 @@ @@ -1409,3 +1777,32 @@ * * Licensed under the GNU/GPL. See COPYING for details. * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch index fa77868783..036f4199ad 100644 --- a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch @@ -103,7 +103,7 @@ + +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -172,7 +172,7 @@ +- Create kernel Documentation (use info from README) --- /dev/null +++ b/drivers/bcma/bcma_private.h -@@ -0,0 +1,54 @@ +@@ -0,0 +1,59 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + @@ -188,12 +188,13 @@ +struct bcma_bus; + +/* main.c */ -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif + @@ -222,8 +223,12 @@ +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + +#endif @@ -517,7 +522,7 @@ +#endif /* CONFIG_BCMA_DRIVER_MIPS */ --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c -@@ -0,0 +1,309 @@ +@@ -0,0 +1,310 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver @@ -599,6 +604,7 @@ + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; @@ -829,13 +835,14 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,237 @@ +@@ -0,0 +1,225 @@ +/* + * Broadcom specific AMBA + * PCI Core + * -+ * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ @@ -847,40 +854,41 @@ + * R/W ops. + **************************************************/ + -+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ -+ pcicore_write32(pc, 0x130, address); -+ pcicore_read32(pc, 0x130); -+ pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + u32 v; + int i; + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } @@ -888,79 +896,84 @@ + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 29); /* Read Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; -+ pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); -+ ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ -+ const u16 mdio_control = 0x128; -+ const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + -+ v = 0x80; /* Enable Preamble Sequence */ -+ v |= 0x2; /* MDIO Clock Divisor */ -+ pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + -+ v = (1 << 30); /* Start of Transaction */ -+ v |= (1 << 28); /* Write Transaction */ -+ v |= (1 << 17); /* Turnaround */ -+ if (pc->core->id.rev < 10) -+ v |= (u32)device << 22; -+ v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; -+ pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { -+ v = pcicore_read32(pc, mdio_control); -+ if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } -+ pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); +} + +/************************************************** @@ -969,72 +982,53 @@ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ -+ return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ -+ const u8 serdes_pll_device = 0x1D; -+ const u8 serdes_rx_device = 0x1F; + u16 tmp; + -+ bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, -+ bcma_pcicore_polarity_workaround(pc)); -+ tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); -+ if (tmp & 0x4000) -+ bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + +/************************************************** + * Init. + **************************************************/ + -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -1069,7 +1063,7 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,299 @@ +@@ -0,0 +1,292 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1226,8 +1220,8 @@ + .awrite32 = bcma_host_pci_awrite32, +}; + -+static int bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; @@ -1307,38 +1301,32 @@ +} + +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1356,8 +1344,7 @@ + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, +}; + +int __init bcma_host_pci_init(void) @@ -1371,7 +1358,7 @@ +} --- /dev/null +++ b/drivers/bcma/main.c -@@ -0,0 +1,354 @@ +@@ -0,0 +1,387 @@ +/* + * Broadcom specific AMBA + * Bus subsystem @@ -1387,6 +1374,12 @@ +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); @@ -1429,7 +1422,7 @@ + .dev_attrs = bcma_device_attrs, +}; + -+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + struct bcma_device *core; + @@ -1439,6 +1432,7 @@ + } + return NULL; +} ++EXPORT_SYMBOL_GPL(bcma_find_core); + +static void bcma_release_core_dev(struct device *dev) +{ @@ -1467,7 +1461,7 @@ + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; -+ dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: @@ -1506,11 +1500,15 @@ + } +} + -+int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { @@ -1543,10 +1541,8 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + + /* Register found cores */ + bcma_register_cores(bus); @@ -1615,6 +1611,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1626,6 +1637,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1728,7 +1748,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,486 @@ +@@ -0,0 +1,507 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1943,6 +1963,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -2084,6 +2115,7 @@ +void bcma_init_bus(struct bcma_bus *bus) +{ + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; @@ -2094,9 +2126,12 @@ + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); -+ bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; -+ bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; -+ bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -2123,6 +2158,7 @@ + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; @@ -2130,18 +2166,23 @@ + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; -+ continue; -+ } else if (err == -ENXIO) -+ continue; -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", @@ -2276,7 +2317,7 @@ +#endif /* BCMA_SCAN_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,298 @@ +@@ -0,0 +1,307 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2415,6 +2456,7 @@ + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; @@ -2441,7 +2483,7 @@ + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); -+ int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + @@ -2454,6 +2496,12 @@ + +extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; @@ -2474,6 +2522,7 @@ + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; @@ -2561,6 +2610,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2577,7 +2627,7 @@ +#endif /* LINUX_BCMA_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -0,0 +1,391 @@ +@@ -0,0 +1,415 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + @@ -2636,6 +2686,9 @@ +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -2652,6 +2705,8 @@ +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -2659,6 +2714,10 @@ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 @@ -2761,6 +2820,22 @@ +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 @@ -2820,7 +2895,6 @@ +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2971,7 +3045,7 @@ +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,91 @@ +@@ -0,0 +1,214 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3027,6 +3101,35 @@ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -3046,26 +3149,120 @@ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + -+extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_regs.h -@@ -0,0 +1,59 @@ +@@ -0,0 +1,86 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + @@ -3124,6 +3321,33 @@ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ +#endif /* LINUX_BCMA_REGS_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -3191,11 +3415,13 @@ sizeof(struct virtio_device_id), "virtio", --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -3208,7 +3434,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -3318,10 +3594,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -3331,85 +3618,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -3419,11 +3850,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -3441,21 +3868,596 @@ +} --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; +} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/driver_mips.c @@ -0,0 +1,256 @@ diff --git a/target/linux/generic/patches-3.0/020-ssb_update.patch b/target/linux/generic/patches-3.0/020-ssb_update.patch index 5a77154101..13709850d7 100644 --- a/target/linux/generic/patches-3.0/020-ssb_update.patch +++ b/target/linux/generic/patches-3.0/020-ssb_update.patch @@ -37,7 +37,53 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -417,9 +417,9 @@ static void ssb_pmu_resources_init(struc +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -417,9 +424,9 @@ static void ssb_pmu_resources_init(struc u32 min_msk = 0, max_msk = 0; unsigned int i; const struct pmu_res_updown_tab_entry *updown_tab = NULL; @@ -49,6 +95,41 @@ switch (bus->chip_id) { case 0x4312: +@@ -606,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} --- a/drivers/ssb/driver_extif.c +++ b/drivers/ssb/driver_extif.c @@ -3,7 +3,7 @@ @@ -116,6 +197,16 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -3,7 +3,7 @@ @@ -127,6 +218,15 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { @@ -314,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st return ssb_mips_irq(extpci_core->dev) + 2; } @@ -193,7 +293,49 @@ #include #include #include -@@ -557,7 +558,7 @@ error: +@@ -139,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -249,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -292,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -557,7 +542,7 @@ error: } /* Needs ssb_buses_lock() */ @@ -202,7 +344,7 @@ { struct ssb_bus *bus, *n; int err = 0; -@@ -768,9 +769,9 @@ out: +@@ -768,9 +753,9 @@ out: return err; } @@ -215,7 +357,7 @@ { int err; -@@ -851,8 +852,8 @@ err_disable_xtal: +@@ -851,8 +836,8 @@ err_disable_xtal: } #ifdef CONFIG_SSB_PCIHOST @@ -226,7 +368,7 @@ { int err; -@@ -875,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); +@@ -875,9 +860,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); #endif /* CONFIG_SSB_PCIHOST */ #ifdef CONFIG_SSB_PCMCIAHOST @@ -239,7 +381,7 @@ { int err; -@@ -897,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register +@@ -897,8 +882,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register #endif /* CONFIG_SSB_PCMCIAHOST */ #ifdef CONFIG_SSB_SDIOHOST @@ -251,7 +393,7 @@ { int err; -@@ -918,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_ +@@ -918,9 +904,9 @@ int ssb_bus_sdiobus_register(struct ssb_ EXPORT_SYMBOL(ssb_bus_sdiobus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -264,7 +406,7 @@ { int err; -@@ -1001,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 +@@ -1001,8 +987,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 switch (plltype) { case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ if (m & SSB_CHIPCO_CLK_T6_MMASK) @@ -275,7 +417,17 @@ case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ -@@ -1259,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic +@@ -1092,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1259,13 +1248,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -322,7 +474,63 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -337,10 +545,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -395,11 +618,10 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ + sprom_extract_r458(out, in); - /* TODO - get remaining rev 8 stuff needed */ -@@ -734,12 +795,9 @@ out_free: +@@ -734,12 +782,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -457,6 +679,25 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -2,7 +2,7 @@ @@ -478,6 +719,16 @@ bus->chip_package = 0; } else { bus->chip_id = 0x4710; +@@ -319,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { --- a/drivers/ssb/sdio.c +++ b/drivers/ssb/sdio.c @@ -6,7 +6,7 @@ @@ -489,6 +740,25 @@ * * Licensed under the GNU/GPL. See COPYING for details. * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -2,7 +2,7 @@ @@ -509,25 +779,54 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,8 +31,10 @@ struct ssb_sprom { +@@ -25,8 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ -+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ -+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -80,6 +88,8 @@ struct ssb_sprom { +@@ -45,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -59,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -80,26 +91,104 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -536,10 +835,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -92,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -549,10 +855,82 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -99,7 +118,7 @@ struct ssb_sprom { + /* Information about the PCB the circuitry is soldered on. */ struct ssb_boardinfo { u16 vendor; u16 type; @@ -561,7 +939,7 @@ }; -@@ -229,10 +248,9 @@ struct ssb_driver { +@@ -229,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -699,3 +1077,24 @@ /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + diff --git a/target/linux/generic/patches-3.0/025-bcma_backport.patch b/target/linux/generic/patches-3.0/025-bcma_backport.patch index 95012ad8dd..3bbbbc6da9 100644 --- a/target/linux/generic/patches-3.0/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.0/025-bcma_backport.patch @@ -18,7 +18,7 @@ +config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" -+ depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + @@ -54,18 +54,19 @@ ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -13,11 +13,33 @@ +@@ -13,11 +13,34 @@ struct bcma_bus; /* main.c */ -extern int bcma_bus_register(struct bcma_bus *bus); -extern void bcma_bus_unregister(struct bcma_bus *bus); -+int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); +void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif @@ -90,12 +91,16 @@ #ifdef CONFIG_BCMA_HOST_PCI /* host_pci.c */ -@@ -25,4 +47,8 @@ extern int __init bcma_host_pci_init(voi +@@ -25,4 +48,12 @@ extern int __init bcma_host_pci_init(voi extern void __exit bcma_host_pci_exit(void); #endif /* CONFIG_BCMA_HOST_PCI */ ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + #endif @@ -360,15 +365,17 @@ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) { -@@ -53,6 +80,7 @@ static void bcma_pmu_resources_init(stru +@@ -52,7 +79,9 @@ static void bcma_pmu_resources_init(stru + min_msk = 0x200D; max_msk = 0xFFFF; break; ++ case 0x4331: case 43224: + case 43225: break; default: pr_err("PMU resource config unknown for device 0x%04X\n", -@@ -74,6 +102,7 @@ void bcma_pmu_swreg_init(struct bcma_drv +@@ -74,6 +103,7 @@ void bcma_pmu_swreg_init(struct bcma_drv case 0x4313: case 0x4331: case 43224: @@ -376,7 +383,7 @@ break; default: pr_err("PMU switch/regulators init unknown for device " -@@ -81,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv +@@ -81,6 +111,24 @@ void bcma_pmu_swreg_init(struct bcma_drv } } @@ -401,7 +408,7 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; -@@ -90,17 +137,19 @@ void bcma_pmu_workarounds(struct bcma_dr +@@ -90,17 +138,19 @@ void bcma_pmu_workarounds(struct bcma_dr bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); break; case 0x4331: @@ -423,7 +430,7 @@ default: pr_err("Workarounds unknown for device 0x%04X\n", bus->chipinfo.id); -@@ -132,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c +@@ -132,3 +182,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c bcma_pmu_swreg_init(cc); bcma_pmu_workarounds(cc); } @@ -814,66 +821,252 @@ +} --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c -@@ -3,7 +3,7 @@ +@@ -2,8 +2,9 @@ + * Broadcom specific AMBA * PCI Core * - * Copyright 2005, Broadcom Corporation +- * Copyright 2005, Broadcom Corporation - * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -157,7 +157,81 @@ static void bcma_pcicore_serdes_workarou +@@ -15,40 +16,41 @@ + * R/W ops. + **************************************************/ + +-static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); + } + + #if 0 + static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + #endif + + static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + u32 v; + int i; + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +@@ -56,79 +58,84 @@ static void bcma_pcie_mdio_set_phy(struc + + static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 29); /* Read Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; +- pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); +- ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; + } + + static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + + /************************************************** +@@ -137,27 +144,82 @@ static void bcma_pcie_mdio_write(struct + + static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) + { +- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; + } + + static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) + { +- const u8 serdes_pll_device = 0x1D; +- const u8 serdes_rx_device = 0x1F; + u16 tmp; + +- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, +- bcma_pcicore_polarity_workaround(pc)); +- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); +- if (tmp & 0x4000) +- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); + } + + /************************************************** * Init. **************************************************/ -void bcma_core_pci_init(struct bcma_drv_pci *pc) -+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) { bcma_pcicore_serdes_workaround(pc); } + -+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+#ifdef CONFIG_SSB_DRIVER_PCICORE -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) -+ return false; -+#endif /* CONFIG_SSB_DRIVER_PCICORE */ -+ -+#if 0 -+ /* TODO: on BCMA we use address from EROM instead of magic formula */ -+ u32 tmp; -+ return !mips_busprobe32(tmp, (bus->mmio + -+ (pc->core->core_index * BCMA_CORE_SIZE))); -+#endif -+ -+ return true; -+} -+ -+void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + if (pc->setup_done) + return; + -+ if (bcma_core_pci_is_in_hostmode(pc)) { +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); -+#else -+ pr_err("Driver compiled without support for hostmode PCI\n"); +#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ -+ } else { -+ bcma_core_pci_clientmode_init(pc); -+ } + -+ pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); +} + +int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, @@ -908,21 +1101,596 @@ +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); --- /dev/null +++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,14 @@ +@@ -0,0 +1,589 @@ +/* + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" ++#include ++#include +#include ++#include + -+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +{ -+ pr_err("No support for PCI core in hostmode yet\n"); ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } ++ ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); +} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; ++} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -9,6 +9,7 @@ @@ -1053,7 +1821,7 @@ static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) { -@@ -87,6 +146,10 @@ const struct bcma_host_ops bcma_host_pci +@@ -87,12 +146,16 @@ const struct bcma_host_ops bcma_host_pci .write8 = bcma_host_pci_write8, .write16 = bcma_host_pci_write16, .write32 = bcma_host_pci_write32, @@ -1064,43 +1832,45 @@ .aread32 = bcma_host_pci_aread32, .awrite32 = bcma_host_pci_awrite32, }; -@@ -171,10 +234,46 @@ static void bcma_host_pci_remove(struct + +-static int bcma_host_pci_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct bcma_bus *bus; + int err = -ENOMEM; +@@ -171,10 +234,40 @@ static void bcma_host_pci_remove(struct pci_set_drvdata(dev, NULL); } +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { @@ -1111,12 +1881,11 @@ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, { 0, }, }; -@@ -185,6 +284,8 @@ static struct pci_driver bcma_pci_bridge +@@ -185,6 +278,7 @@ static struct pci_driver bcma_pci_bridge .id_table = bcma_pci_bridge_tbl, .probe = bcma_host_pci_probe, .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, }; int __init bcma_host_pci_init(void) @@ -1308,7 +2077,7 @@ +} --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c -@@ -6,7 +6,9 @@ +@@ -6,14 +6,23 @@ */ #include "bcma_private.h" @@ -1318,7 +2087,13 @@ MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); MODULE_LICENSE("GPL"); -@@ -14,6 +16,7 @@ MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ static int bcma_bus_match(struct device *dev, struct device_driver *drv); static int bcma_device_probe(struct device *dev); static int bcma_device_remove(struct device *dev); @@ -1326,7 +2101,7 @@ static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) { -@@ -48,6 +51,7 @@ static struct bus_type bcma_bus_type = { +@@ -48,10 +57,11 @@ static struct bus_type bcma_bus_type = { .match = bcma_bus_match, .probe = bcma_device_probe, .remove = bcma_device_remove, @@ -1334,7 +2109,17 @@ .dev_attrs = bcma_device_attrs, }; -@@ -65,6 +69,10 @@ static struct bcma_device *bcma_find_cor +-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) + { + struct bcma_device *core; + +@@ -61,10 +71,15 @@ static struct bcma_device *bcma_find_cor + } + return NULL; + } ++EXPORT_SYMBOL_GPL(bcma_find_core); + static void bcma_release_core_dev(struct device *dev) { struct bcma_device *core = container_of(dev, struct bcma_device, dev); @@ -1345,7 +2130,7 @@ kfree(core); } -@@ -79,6 +87,7 @@ static int bcma_register_cores(struct bc +@@ -79,18 +94,24 @@ static int bcma_register_cores(struct bc case BCMA_CORE_CHIPCOMMON: case BCMA_CORE_PCI: case BCMA_CORE_PCIE: @@ -1353,7 +2138,11 @@ continue; } -@@ -89,8 +98,13 @@ static int bcma_register_cores(struct bc + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; +- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + switch (bus->hosttype) { case BCMA_HOSTTYPE_PCI: core->dev.parent = &bus->host_pci->dev; @@ -1368,7 +2157,24 @@ case BCMA_HOSTTYPE_SDIO: break; } -@@ -137,6 +151,13 @@ int bcma_bus_register(struct bcma_bus *b +@@ -118,11 +139,15 @@ static void bcma_unregister_cores(struct + } + } + +-int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) + { + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { +@@ -137,6 +162,13 @@ int bcma_bus_register(struct bcma_bus *b bcma_core_chipcommon_init(&bus->drv_cc); } @@ -1382,7 +2188,7 @@ /* Init PCIE core */ core = bcma_find_core(bus, BCMA_CORE_PCIE); if (core) { -@@ -144,6 +165,15 @@ int bcma_bus_register(struct bcma_bus *b +@@ -144,6 +176,13 @@ int bcma_bus_register(struct bcma_bus *b bcma_core_pci_init(&bus->drv_pci); } @@ -1390,15 +2196,13 @@ + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); -+ } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); -+ return -ENOENT; -+ } + /* Register found cores */ bcma_register_cores(bus); -@@ -151,13 +181,80 @@ int bcma_bus_register(struct bcma_bus *b +@@ -151,13 +190,104 @@ int bcma_bus_register(struct bcma_bus *b return 0; } @@ -1464,6 +2268,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1475,13 +2294,22 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) { -@@ -217,6 +314,16 @@ static int bcma_device_remove(struct dev +@@ -217,6 +347,16 @@ static int bcma_device_remove(struct dev return 0; } @@ -1500,7 +2328,7 @@ int err; --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struc +@@ -200,18 +200,174 @@ static s32 bcma_erom_get_addr_desc(struc return addrl; } @@ -1511,7 +2339,7 @@ - u32 erombase; - u32 __iomem *eromptr, *eromend; + struct bcma_device *core; - ++ + list_for_each_entry(core, &bus->cores, list) { + if (core->core_index == index) + return core; @@ -1519,6 +2347,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} + +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -1661,6 +2500,7 @@ +{ s32 tmp; - u8 i, j; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); - int err; + if (bus->init_done) @@ -1668,10 +2508,19 @@ INIT_LIST_HEAD(&bus->cores); bus->nr_cores = 0; -@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus) - bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; - bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; - bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; +@@ -219,142 +375,133 @@ int bcma_bus_scan(struct bcma_bus *bus) + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); +- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; +- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; +- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -1697,7 +2546,12 @@ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); bcma_scan_switch_core(bus, erombase); -@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus) + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; INIT_LIST_HEAD(&core->list); core->bus = bus; @@ -1706,7 +2560,16 @@ - if (cia < 0) { - bcma_erom_push_ent(&eromptr); - if (bcma_erom_is_end(bus, &eromptr)) -- break; ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { + break; - err= -EILSEQ; - goto out; - } @@ -1714,8 +2577,10 @@ - if (cib < 0) { - err= -EILSEQ; - goto out; -- } -- ++ } ++ return err; + } + - /* parse CIs */ - core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; - core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; @@ -1730,32 +2595,33 @@ - (core->id.id == 0xFFF)) || - (ports[1] == 0)) { - bcma_erom_skip_component(bus, &eromptr); -+ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; - continue; +- continue; - } -- ++ core->core_index = core_num++; ++ bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + - /* check if component is a core at all */ - if (wrappers[0] + wrappers[1] == 0) { - /* we could save addrl of the router - if (cid == BCMA_CORE_OOB_ROUTER) - */ - bcma_erom_skip_component(bus, &eromptr); -+ } else if (err == -ENXIO) - continue; +- continue; - } -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) -+ return err; ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); - if (bcma_erom_is_bridge(bus, &eromptr)) { - bcma_erom_skip_component(bus, &eromptr); - continue; - } -+ core->core_index = core_num++; -+ bus->nr_cores++; ++ list_add(&core->list, &bus->cores); ++ } - /* get & parse master ports */ - for (i = 0; i < ports[0]; i++) { @@ -1765,11 +2631,8 @@ - goto out; - } - } -+ pr_info("Core %d found: %s " -+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ core->core_index, bcma_device_name(&core->id), -+ core->id.manuf, core->id.id, core->id.rev, -+ core->id.class); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); - /* get & parse slave ports */ - for (i = 0; i < ports[1]; i++) { @@ -1787,8 +2650,8 @@ - } - } - } -+ list_add(&core->list, &bus->cores); -+ } ++ return 0; ++} - /* get & parse master wrappers */ - for (i = 0; i < wrappers[0]; i++) { @@ -1806,8 +2669,12 @@ - } - } - } -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) -+ iounmap(eromptr); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; - /* get & parse slave wrappers */ - for (i = 0; i < wrappers[1]; i++) { @@ -1826,16 +2693,6 @@ - } - } - } -+ return 0; -+} -+ -+int __init bcma_bus_scan_early(struct bcma_bus *bus, -+ struct bcma_device_id *match, -+ struct bcma_device *core) -+{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; - + int err = -ENODEV; + int core_num = 0; + @@ -1847,7 +2704,7 @@ + } else { + eromptr = bus->mmio; + } -+ + + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1894,11 +2751,13 @@ } --- /dev/null +++ b/drivers/bcma/sprom.c -@@ -0,0 +1,247 @@ +@@ -0,0 +1,450 @@ +/* + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + @@ -1911,7 +2770,57 @@ +#include +#include + -+#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + +/************************************************** + * R/W ops. @@ -2021,10 +2930,21 @@ + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ +static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) +{ -+ u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; @@ -2034,85 +2954,229 @@ + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); +} + +int bcma_sprom_get(struct bcma_bus *bus) +{ -+ u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); @@ -2122,11 +3186,7 @@ + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + -+ /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). -+ * According to brcm80211 this applies to cards with PCIe rev >= 6 -+ * TODO: understand this condition and use it */ -+ offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : -+ BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) @@ -2189,7 +3249,7 @@ /* Agent ops */ u32 (*aread32)(struct bcma_device *core, u16 offset); void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); -@@ -117,6 +130,9 @@ struct bcma_device { +@@ -117,13 +130,20 @@ struct bcma_device { struct bcma_device_id id; struct device dev; @@ -2199,7 +3259,8 @@ bool dev_registered; u8 core_index; -@@ -124,6 +140,9 @@ struct bcma_device { ++ u8 core_unit; + u32 addr; u32 wrap; @@ -2209,7 +3270,16 @@ void *drvdata; struct list_head list; }; -@@ -151,10 +170,9 @@ struct bcma_driver { +@@ -143,7 +163,7 @@ struct bcma_driver { + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); +- int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + +@@ -151,12 +171,17 @@ struct bcma_driver { }; extern int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); @@ -2222,12 +3292,21 @@ + extern void bcma_driver_unregister(struct bcma_driver *drv); ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ struct bcma_bus { -@@ -176,49 +194,105 @@ struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; +@@ -176,49 +201,107 @@ struct bcma_bus { struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; + u8 init_done:1; ++ u8 num; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; @@ -2323,6 +3402,7 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); extern bool bcma_core_is_enabled(struct bcma_device *core); +extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); @@ -2347,7 +3427,37 @@ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 -@@ -178,16 +179,9 @@ +@@ -55,6 +56,9 @@ + #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 + #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 + #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ + #define BCMA_CC_OTPC 0x0014 /* OTP control */ + #define BCMA_CC_OTPC_RECWAIT 0xFF000000 + #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +@@ -71,6 +75,8 @@ + #define BCMA_CC_OTPP_READ 0x40000000 + #define BCMA_CC_OTPP_START 0x80000000 + #define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ + #define BCMA_CC_IRQSTAT 0x0020 + #define BCMA_CC_IRQMASK 0x0024 + #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +@@ -78,6 +84,10 @@ + #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ + #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ + #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 + #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ + #define BCMA_CC_JCMD_START 0x80000000 + #define BCMA_CC_JCMD_BUSY 0x80000000 +@@ -178,16 +188,25 @@ #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 @@ -2362,11 +3472,27 @@ -#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ -#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */ -#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */ ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 +/* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 #define BCMA_CC_UART0_IMR 0x0304 -@@ -209,6 +203,7 @@ +@@ -209,6 +228,7 @@ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 @@ -2374,12 +3500,11 @@ #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ -@@ -244,6 +239,66 @@ +@@ -244,6 +264,65 @@ #define BCMA_CC_REGCTL_DATA 0x065C #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 +#define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -+#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 @@ -2441,7 +3566,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) -@@ -253,14 +308,37 @@ struct bcma_chipcommon_pmu { +@@ -253,14 +332,37 @@ struct bcma_chipcommon_pmu { u32 crystalfreq; /* The active crystal frequency (in kHz) */ }; @@ -2479,7 +3604,7 @@ }; /* Register access */ -@@ -281,6 +359,8 @@ extern void bcma_core_chipcommon_init(st +@@ -281,6 +383,8 @@ extern void bcma_core_chipcommon_init(st extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); @@ -2488,7 +3613,7 @@ extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); -@@ -299,4 +379,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm +@@ -299,4 +403,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); @@ -2558,12 +3683,156 @@ +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -85,5 +85,7 @@ struct bcma_drv_pci { +@@ -53,6 +53,35 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 + #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ + #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ + #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +@@ -72,18 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ + #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ + /* PCIcore specific boardflags */ + #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ + struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif + }; + + /* Register access */ + #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) - extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +-extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); ++ ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- a/include/linux/bcma/bcma_regs.h @@ -2608,6 +3877,38 @@ #define BCMA_RESET_CTL 0x0800 #define BCMA_RESET_CTL_RESET 0x0001 +@@ -31,4 +56,31 @@ + #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ + #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ + #endif /* LINUX_BCMA_REGS_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_soc.h @@ -0,0 +1,16 @@ diff --git a/target/linux/generic/patches-3.1/020-ssb_update.patch b/target/linux/generic/patches-3.1/020-ssb_update.patch index 843f970447..76759273a7 100644 --- a/target/linux/generic/patches-3.1/020-ssb_update.patch +++ b/target/linux/generic/patches-3.1/020-ssb_update.patch @@ -1,3 +1,14 @@ +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c @@ -11,6 +11,7 @@ @@ -8,6 +19,101 @@ #include #include "ssb_private.h" +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -12,6 +12,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -606,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -12,6 +12,7 @@ @@ -18,7 +124,59 @@ #include #include #include -@@ -1260,16 +1261,34 @@ void ssb_device_disable(struct ssb_devic +@@ -139,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -249,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -292,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -1093,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); +@@ -1260,16 +1248,34 @@ void ssb_device_disable(struct ssb_devic } EXPORT_SYMBOL(ssb_device_disable); @@ -58,7 +216,63 @@ } --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -73,10 +287,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -131,10 +360,74 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ + sprom_extract_r458(out, in); - /* TODO - get remaining rev 8 stuff needed */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; @@ -144,22 +437,56 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -25,7 +31,7 @@ struct ssb_sprom { +@@ -25,10 +31,13 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ u8 country_code; /* Country Code */ - u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ - u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ -@@ -82,6 +88,8 @@ struct ssb_sprom { +- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ +- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; +@@ -47,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -61,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -82,19 +91,97 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -168,10 +495,17 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -94,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; } antenna_gain; +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + struct { + struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; @@ -181,10 +515,83 @@ + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; -@@ -231,10 +248,9 @@ struct ssb_driver { + /* Information about the PCB the circuitry is soldered on. */ +@@ -231,10 +318,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -198,6 +605,16 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -432,6 +432,56 @@ diff --git a/target/linux/generic/patches-3.1/025-bcma_backport.patch b/target/linux/generic/patches-3.1/025-bcma_backport.patch index 671c6ce24b..1f0b9b5126 100644 --- a/target/linux/generic/patches-3.1/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.1/025-bcma_backport.patch @@ -1,6 +1,11 @@ --- a/drivers/bcma/Kconfig +++ b/drivers/bcma/Kconfig -@@ -33,6 +33,19 @@ config BCMA_DRIVER_PCI_HOSTMODE +@@ -29,10 +29,23 @@ config BCMA_HOST_PCI + + config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" +- depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI help PCI core hostmode operation (external PCI bus). @@ -34,14 +39,18 @@ ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h -@@ -15,13 +15,32 @@ struct bcma_bus; +@@ -13,23 +13,47 @@ + struct bcma_bus; + /* main.c */ - int bcma_bus_register(struct bcma_bus *bus); +-int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); void bcma_bus_unregister(struct bcma_bus *bus); +int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); +int bcma_bus_resume(struct bcma_bus *bus); +#endif @@ -67,6 +76,19 @@ #ifdef CONFIG_BCMA_HOST_PCI /* host_pci.c */ extern int __init bcma_host_pci_init(void); + extern void __exit bcma_host_pci_exit(void); + #endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + + #endif --- a/drivers/bcma/core.c +++ b/drivers/bcma/core.c @@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); @@ -210,7 +232,15 @@ static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) { -@@ -83,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv +@@ -52,6 +79,7 @@ static void bcma_pmu_resources_init(stru + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; +@@ -83,6 +111,24 @@ void bcma_pmu_swreg_init(struct bcma_drv } } @@ -235,7 +265,7 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc) { struct bcma_bus *bus = cc->core->bus; -@@ -92,7 +137,7 @@ void bcma_pmu_workarounds(struct bcma_dr +@@ -92,7 +138,7 @@ void bcma_pmu_workarounds(struct bcma_dr bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); break; case 0x4331: @@ -244,7 +274,7 @@ break; case 43224: if (bus->chipinfo.rev == 0) { -@@ -136,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c +@@ -136,3 +182,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c bcma_pmu_swreg_init(cc); bcma_pmu_workarounds(cc); } @@ -635,35 +665,285 @@ +} --- a/drivers/bcma/driver_pci.c +++ b/drivers/bcma/driver_pci.c -@@ -173,7 +173,7 @@ static bool bcma_core_pci_is_in_hostmode - return false; +@@ -2,8 +2,9 @@ + * Broadcom specific AMBA + * PCI Core + * +- * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -15,40 +16,41 @@ + * R/W ops. + **************************************************/ - #ifdef CONFIG_SSB_DRIVER_PCICORE -- if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) -+ if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) - return false; - #endif /* CONFIG_SSB_DRIVER_PCICORE */ +-static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); + } + + #if 0 + static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + #endif + + static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + u32 v; + int i; + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +@@ -56,79 +58,84 @@ static void bcma_pcie_mdio_set_phy(struc + + static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 29); /* Read Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; +- pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); +- ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; + } -@@ -189,6 +189,9 @@ static bool bcma_core_pci_is_in_hostmode + static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + + /************************************************** +@@ -137,67 +144,53 @@ static void bcma_pcie_mdio_write(struct + + static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) + { +- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; + } + + static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) + { +- const u8 serdes_pll_device = 0x1D; +- const u8 serdes_rx_device = 0x1F; + u16 tmp; + +- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, +- bcma_pcicore_polarity_workaround(pc)); +- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); +- if (tmp & 0x4000) +- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); + } + + /************************************************** + * Init. + **************************************************/ + +-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) + { + bcma_pcicore_serdes_workaround(pc); + } - void bcma_core_pci_init(struct bcma_drv_pci *pc) +-static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) { +- struct bcma_bus *bus = pc->core->bus; +- u16 chipid_top; +- +- chipid_top = (bus->chipinfo.id & 0xFF00); +- if (chipid_top != 0x4700 && +- chipid_top != 0x5300) +- return false; +- +-#ifdef CONFIG_SSB_DRIVER_PCICORE +- if (bus->sprom.boardflags_lo & SSB_PCICORE_BFL_NOPCI) +- return false; +-#endif /* CONFIG_SSB_DRIVER_PCICORE */ +- +-#if 0 +- /* TODO: on BCMA we use address from EROM instead of magic formula */ +- u32 tmp; +- return !mips_busprobe32(tmp, (bus->mmio + +- (pc->core->core_index * BCMA_CORE_SIZE))); +-#endif +- +- return true; +-} + if (pc->setup_done) + return; -+ - if (bcma_core_pci_is_in_hostmode(pc)) { + +-void bcma_core_pci_init(struct bcma_drv_pci *pc) +-{ +- if (bcma_core_pci_is_in_hostmode(pc)) { #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) bcma_core_pci_hostmode_init(pc); -@@ -198,6 +201,8 @@ void bcma_core_pci_init(struct bcma_drv_ - } else { - bcma_core_pci_clientmode_init(pc); - } +-#else +- pr_err("Driver compiled without support for hostmode PCI\n"); + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ +- } else { + -+ pc->setup_done = true; ++ if (!pc->hostmode) + bcma_core_pci_clientmode_init(pc); +- } } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, -@@ -205,7 +210,14 @@ int bcma_core_pci_irq_ctl(struct bcma_dr +@@ -205,7 +198,14 @@ int bcma_core_pci_irq_ctl(struct bcma_dr { struct pci_dev *pdev = pc->core->bus->host_pci; u32 coremask, tmp; @@ -679,6 +959,598 @@ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); if (err) +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -2,13 +2,587 @@ + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include "bcma_private.h" ++#include + #include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } ++ ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} + +-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) + { +- pr_err("No support for PCI core in hostmode yet\n"); ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; + } ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -9,6 +9,7 @@ @@ -760,54 +1632,58 @@ iowrite32(value, core->bus->mmio + offset); } -@@ -223,6 +234,41 @@ static void bcma_host_pci_remove(struct +@@ -143,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci + .awrite32 = bcma_host_pci_awrite32, + }; + +-static int bcma_host_pci_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct bcma_bus *bus; + int err = -ENOMEM; +@@ -223,6 +234,35 @@ static void bcma_host_pci_remove(struct pci_set_drvdata(dev, NULL); } +#ifdef CONFIG_PM -+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) +{ -+ /* Host specific */ -+ pci_save_state(dev); -+ pci_disable_device(dev); -+ pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ return 0; ++ bus->mapped_core = NULL; ++ ++ return bcma_bus_suspend(bus); +} + -+static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) +{ -+ struct bcma_bus *bus = pci_get_drvdata(dev); -+ int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + -+ /* Host specific */ -+ pci_set_power_state(dev, 0); -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + -+ /* Bus specific */ -+ err = bcma_bus_resume(bus); -+ if (err) -+ return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + -+ return 0; -+} +#else /* CONFIG_PM */ -+# define bcma_host_pci_suspend NULL -+# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ +#endif /* CONFIG_PM */ + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, -@@ -238,6 +284,8 @@ static struct pci_driver bcma_pci_bridge +@@ -238,6 +278,7 @@ static struct pci_driver bcma_pci_bridge .id_table = bcma_pci_bridge_tbl, .probe = bcma_host_pci_probe, .remove = bcma_host_pci_remove, -+ .suspend = bcma_host_pci_suspend, -+ .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, }; int __init bcma_host_pci_init(void) @@ -999,7 +1875,7 @@ +} --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c -@@ -6,6 +6,7 @@ +@@ -6,12 +6,19 @@ */ #include "bcma_private.h" @@ -1007,7 +1883,33 @@ #include #include -@@ -68,6 +69,10 @@ static struct bcma_device *bcma_find_cor + MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); + MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ + static int bcma_bus_match(struct device *dev, struct device_driver *drv); + static int bcma_device_probe(struct device *dev); + static int bcma_device_remove(struct device *dev); +@@ -54,7 +61,7 @@ static struct bus_type bcma_bus_type = { + .dev_attrs = bcma_device_attrs, + }; + +-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) + { + struct bcma_device *core; + +@@ -64,10 +71,15 @@ static struct bcma_device *bcma_find_cor + } + return NULL; + } ++EXPORT_SYMBOL_GPL(bcma_find_core); + static void bcma_release_core_dev(struct device *dev) { struct bcma_device *core = container_of(dev, struct bcma_device, dev); @@ -1018,7 +1920,7 @@ kfree(core); } -@@ -82,6 +87,7 @@ static int bcma_register_cores(struct bc +@@ -82,12 +94,13 @@ static int bcma_register_cores(struct bc case BCMA_CORE_CHIPCOMMON: case BCMA_CORE_PCI: case BCMA_CORE_PCIE: @@ -1026,7 +1928,14 @@ continue; } -@@ -95,7 +101,10 @@ static int bcma_register_cores(struct bc + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; +- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: +@@ -95,7 +108,10 @@ static int bcma_register_cores(struct bc core->dma_dev = &bus->host_pci->dev; core->irq = bus->host_pci->irq; break; @@ -1038,7 +1947,24 @@ case BCMA_HOSTTYPE_SDIO: break; } -@@ -142,6 +151,13 @@ int bcma_bus_register(struct bcma_bus *b +@@ -123,11 +139,15 @@ static void bcma_unregister_cores(struct + } + } + +-int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) + { + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { +@@ -142,6 +162,13 @@ int bcma_bus_register(struct bcma_bus *b bcma_core_chipcommon_init(&bus->drv_cc); } @@ -1052,7 +1978,19 @@ /* Init PCIE core */ core = bcma_find_core(bus, BCMA_CORE_PCIE); if (core) { -@@ -171,6 +187,75 @@ void bcma_bus_unregister(struct bcma_bus +@@ -153,10 +180,8 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); +- } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); +- return -ENOENT; +- } + + /* Register found cores */ + bcma_register_cores(bus); +@@ -171,6 +196,99 @@ void bcma_bus_unregister(struct bcma_bus bcma_unregister_cores(bus); } @@ -1110,6 +2048,21 @@ +} + +#ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ +int bcma_bus_resume(struct bcma_bus *bus) +{ + struct bcma_device *core; @@ -1121,6 +2074,15 @@ + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; +} +#endif @@ -1130,7 +2092,7 @@ drv->drv.name = drv->name; --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struc +@@ -200,18 +200,174 @@ static s32 bcma_erom_get_addr_desc(struc return addrl; } @@ -1141,7 +2103,7 @@ - u32 erombase; - u32 __iomem *eromptr, *eromend; + struct bcma_device *core; - ++ + list_for_each_entry(core, &bus->cores, list) { + if (core->core_index == index) + return core; @@ -1149,6 +2111,17 @@ + return NULL; +} + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} + +static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) @@ -1291,6 +2264,7 @@ +{ s32 tmp; - u8 i, j; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); - int err; + if (bus->init_done) @@ -1298,10 +2272,19 @@ INIT_LIST_HEAD(&bus->cores); bus->nr_cores = 0; -@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus) - bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; - bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; - bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; +@@ -219,142 +375,133 @@ int bcma_bus_scan(struct bcma_bus *bus) + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); +- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; +- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; +- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; +} + @@ -1327,7 +2310,12 @@ eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); bcma_scan_switch_core(bus, erombase); -@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus) + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; INIT_LIST_HEAD(&core->list); core->bus = bus; @@ -1336,7 +2324,16 @@ - if (cia < 0) { - bcma_erom_push_ent(&eromptr); - if (bcma_erom_is_end(bus, &eromptr)) -- break; ++ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { + break; - err= -EILSEQ; - goto out; - } @@ -1344,8 +2341,10 @@ - if (cib < 0) { - err= -EILSEQ; - goto out; -- } -- ++ } ++ return err; + } + - /* parse CIs */ - core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; - core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; @@ -1360,32 +2359,33 @@ - (core->id.id == 0xFFF)) || - (ports[1] == 0)) { - bcma_erom_skip_component(bus, &eromptr); -+ err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); -+ if (err == -ENODEV) { -+ core_num++; - continue; +- continue; - } -- ++ core->core_index = core_num++; ++ bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + - /* check if component is a core at all */ - if (wrappers[0] + wrappers[1] == 0) { - /* we could save addrl of the router - if (cid == BCMA_CORE_OOB_ROUTER) - */ - bcma_erom_skip_component(bus, &eromptr); -+ } else if (err == -ENXIO) - continue; +- continue; - } -+ else if (err == -ESPIPE) -+ break; -+ else if (err < 0) -+ return err; ++ pr_info("Core %d found: %s " ++ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", ++ core->core_index, bcma_device_name(&core->id), ++ core->id.manuf, core->id.id, core->id.rev, ++ core->id.class); - if (bcma_erom_is_bridge(bus, &eromptr)) { - bcma_erom_skip_component(bus, &eromptr); - continue; - } -+ core->core_index = core_num++; -+ bus->nr_cores++; ++ list_add(&core->list, &bus->cores); ++ } - /* get & parse master ports */ - for (i = 0; i < ports[0]; i++) { @@ -1395,11 +2395,8 @@ - goto out; - } - } -+ pr_info("Core %d found: %s " -+ "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", -+ core->core_index, bcma_device_name(&core->id), -+ core->id.manuf, core->id.id, core->id.rev, -+ core->id.class); ++ if (bus->hosttype == BCMA_HOSTTYPE_SOC) ++ iounmap(eromptr); - /* get & parse slave ports */ - for (i = 0; i < ports[1]; i++) { @@ -1417,8 +2414,8 @@ - } - } - } -+ list_add(&core->list, &bus->cores); -+ } ++ return 0; ++} - /* get & parse master wrappers */ - for (i = 0; i < wrappers[0]; i++) { @@ -1436,8 +2433,12 @@ - } - } - } -+ if (bus->hosttype == BCMA_HOSTTYPE_SOC) -+ iounmap(eromptr); ++int __init bcma_bus_scan_early(struct bcma_bus *bus, ++ struct bcma_device_id *match, ++ struct bcma_device *core) ++{ ++ u32 erombase; ++ u32 __iomem *eromptr, *eromend; - /* get & parse slave wrappers */ - for (i = 0; i < wrappers[1]; i++) { @@ -1456,16 +2457,6 @@ - } - } - } -+ return 0; -+} -+ -+int __init bcma_bus_scan_early(struct bcma_bus *bus, -+ struct bcma_device_id *match, -+ struct bcma_device *core) -+{ -+ u32 erombase; -+ u32 __iomem *eromptr, *eromend; - + int err = -ENODEV; + int core_num = 0; + @@ -1477,7 +2468,7 @@ + } else { + eromptr = bus->mmio; + } -+ + + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -1524,99 +2515,344 @@ } --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c -@@ -129,10 +129,80 @@ static void bcma_sprom_extract_r8(struct - u16 v; - int i; +@@ -2,6 +2,8 @@ + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +@@ -14,7 +16,57 @@ + #include + #include +-#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + + /************************************************** + * R/W ops. +@@ -124,41 +176,268 @@ static int bcma_sprom_valid(const u16 *s + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ + static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) + { +- u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); ++ + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; -+ + for (i = 0; i < 3; i++) { v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); } + -+ bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; -+ -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ -+ bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -+ bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -+ bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -+ bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -+ -+ bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); } int bcma_sprom_get(struct bcma_bus *bus) -@@ -152,6 +222,9 @@ int bcma_sprom_get(struct bcma_bus *bus) + { +- u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + +- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) +- return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); if (!sprom) return -ENOMEM; +- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). +- * According to brcm80211 this applies to cards with PCIe rev >= 6 +- * TODO: understand this condition and use it */ +- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : +- BCMA_CC_SPROM_PCIE6; + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + - /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). - * According to brcm80211 this applies to cards with PCIe rev >= 6 - * TODO: understand this condition and use it */ -@@ -159,6 +232,9 @@ int bcma_sprom_get(struct bcma_bus *bus) - BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); bcma_sprom_read(bus, offset, sprom); + if (bus->chipinfo.id == 0x4331) @@ -1646,7 +2882,7 @@ }; struct bcma_chipinfo { -@@ -130,6 +131,7 @@ struct bcma_device { +@@ -130,14 +131,19 @@ struct bcma_device { struct device dev; struct device *dma_dev; @@ -1654,7 +2890,9 @@ unsigned int irq; bool dev_registered; -@@ -138,6 +140,9 @@ struct bcma_device { + u8 core_index; ++ u8 core_unit; + u32 addr; u32 wrap; @@ -1664,7 +2902,16 @@ void *drvdata; struct list_head list; }; -@@ -165,10 +170,9 @@ struct bcma_driver { +@@ -157,7 +163,7 @@ struct bcma_driver { + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); +- int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + +@@ -165,12 +171,17 @@ struct bcma_driver { }; extern int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); @@ -1677,12 +2924,21 @@ + extern void bcma_driver_unregister(struct bcma_driver *drv); ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ struct bcma_bus { -@@ -190,70 +194,93 @@ struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; +@@ -190,71 +201,96 @@ struct bcma_bus { struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; + u8 init_done:1; ++ u8 num; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; @@ -1787,8 +3043,10 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); + extern int bcma_core_enable(struct bcma_device *core, u32 flags); --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,6 +24,7 @@ @@ -1799,15 +3057,62 @@ #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 -@@ -178,6 +179,7 @@ +@@ -55,6 +56,9 @@ + #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 + #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 + #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ + #define BCMA_CC_OTPC 0x0014 /* OTP control */ + #define BCMA_CC_OTPC_RECWAIT 0xFF000000 + #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +@@ -71,6 +75,8 @@ + #define BCMA_CC_OTPP_READ 0x40000000 + #define BCMA_CC_OTPP_START 0x80000000 + #define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ + #define BCMA_CC_IRQSTAT 0x0020 + #define BCMA_CC_IRQMASK 0x0024 + #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +@@ -78,6 +84,10 @@ + #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ + #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ + #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 + #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ + #define BCMA_CC_JCMD_START 0x80000000 + #define BCMA_CC_JCMD_BUSY 0x80000000 +@@ -178,7 +188,24 @@ #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ -@@ -201,6 +203,7 @@ + #define BCMA_CC_UART0_DATA 0x0300 +@@ -201,6 +228,7 @@ #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 @@ -1815,10 +3120,12 @@ #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ -@@ -239,6 +242,64 @@ +@@ -237,7 +265,64 @@ + #define BCMA_CC_PLLCTL_ADDR 0x0660 + #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ - #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ - +-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ ++ +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 @@ -1876,11 +3183,10 @@ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ -+ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) - */ -@@ -247,14 +308,37 @@ struct bcma_chipcommon_pmu { +@@ -247,14 +332,37 @@ struct bcma_chipcommon_pmu { u32 crystalfreq; /* The active crystal frequency (in kHz) */ }; @@ -1918,7 +3224,7 @@ }; /* Register access */ -@@ -275,6 +359,8 @@ extern void bcma_core_chipcommon_init(st +@@ -275,6 +383,8 @@ extern void bcma_core_chipcommon_init(st extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); @@ -1927,7 +3233,7 @@ extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); -@@ -293,4 +379,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm +@@ -293,4 +403,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); @@ -1995,6 +3301,194 @@ +extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); + +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -53,6 +53,35 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 + #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ + #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ + #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +@@ -72,20 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ + #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ + /* PCIcore specific boardflags */ + #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ + struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif + }; + + /* Register access */ + #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) + #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +-extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ +--- a/include/linux/bcma/bcma_regs.h ++++ b/include/linux/bcma/bcma_regs.h +@@ -56,4 +56,31 @@ + #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ + #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ + #endif /* LINUX_BCMA_REGS_H_ */ --- /dev/null +++ b/include/linux/bcma/bcma_soc.h @@ -0,0 +1,16 @@ diff --git a/target/linux/generic/patches-3.2/020-ssb_update.patch b/target/linux/generic/patches-3.2/020-ssb_update.patch index 1fe1768f1a..1b38e380d4 100644 --- a/target/linux/generic/patches-3.2/020-ssb_update.patch +++ b/target/linux/generic/patches-3.2/020-ssb_update.patch @@ -1,6 +1,222 @@ +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -13,6 +13,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -75,7 +75,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -140,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -250,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -293,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -1094,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -15,10 +231,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -73,10 +304,74 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ + sprom_extract_r458(out, in); - /* TODO - get remaining rev 8 stuff needed */ +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; @@ -86,13 +381,54 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -82,6 +88,8 @@ struct ssb_sprom { +@@ -26,9 +32,12 @@ struct ssb_sprom { + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ + u8 country_code; /* Country Code */ +- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ +- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; +@@ -47,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -61,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -82,19 +91,97 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -101,22 +437,111 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ -@@ -94,6 +102,15 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ - } antenna_gain; - + struct { ++ s8 a0, a1, a2, a3; ++ } antenna_gain; ++ + struct { -+ struct { + struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz2; -+ struct { + struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ +- } antenna_gain; + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz5; + } fem; + - /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; + +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; }; + /* Information about the PCB the circuitry is soldered on. */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -432,6 +432,56 @@ @@ -184,50 +609,3 @@ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ -@@ -464,6 +515,46 @@ - - /* Values for boardflags_lo read from SPROM */ - #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ -+#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ -+#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ -+#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ -+#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ -+#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ -+#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ -+#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ -+#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ -+#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ -+#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ -+#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ -+#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ -+#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ -+#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ -+#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ -+ -+/* Values for boardflags_hi read from SPROM */ -+#define SSB_BFH_NOPA 0x0001 /* has no PA */ -+#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ -+#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ -+#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ -+#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ -+#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ -+#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ -+ -+/* Values for boardflags2_lo read from SPROM */ -+#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ -+#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ -+#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ -+#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ -+#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ -+#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ -+#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ -+#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ -+#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ -+#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ -+#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ -+ -+/* Values for boardflags_lo read from SPROM */ -+#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ - #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ - #define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ - #define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ diff --git a/target/linux/generic/patches-3.2/025-bcma_backport.patch b/target/linux/generic/patches-3.2/025-bcma_backport.patch index bc3f05573f..fdb1b8dd2b 100644 --- a/target/linux/generic/patches-3.2/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.2/025-bcma_backport.patch @@ -1,3 +1,34 @@ +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -13,12 +13,13 @@ + struct bcma_bus; + + /* main.c */ +-int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); + void bcma_bus_unregister(struct bcma_bus *bus); + int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, + struct bcma_device *core_mips); + #ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus); + int bcma_bus_resume(struct bcma_bus *bus); + #endif + +@@ -47,8 +48,12 @@ extern int __init bcma_host_pci_init(voi + extern void __exit bcma_host_pci_exit(void); + #endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + + #endif --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c @@ -21,48 +21,58 @@ static void bcma_host_pci_switch_core(st @@ -5,10 +36,11 @@ } -static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +-{ +/* Provides access to the requested core. Returns base offset that has to be + * used. It makes use of fixed windows when possible. */ +static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) - { ++{ + switch (core->id.id) { + case BCMA_CORE_CHIPCOMMON: + return 3 * BCMA_CORE_SIZE; @@ -70,102 +102,1562 @@ iowrite32(value, core->bus->mmio + offset); } +@@ -144,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci + .awrite32 = bcma_host_pci_awrite32, + }; + +-static int bcma_host_pci_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct bcma_bus *bus; + int err = -ENOMEM; +@@ -225,41 +235,32 @@ static void bcma_host_pci_remove(struct + } + + #ifdef CONFIG_PM +-static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) + { +- struct bcma_bus *bus = pci_get_drvdata(dev); +- +- /* Host specific */ +- pci_save_state(dev); +- pci_disable_device(dev); +- pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + + bus->mapped_core = NULL; +- return 0; ++ ++ return bcma_bus_suspend(bus); + } + +-static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) + { +- struct bcma_bus *bus = pci_get_drvdata(dev); +- int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + +- /* Host specific */ +- pci_set_power_state(dev, 0); +- err = pci_enable_device(dev); +- if (err) +- return err; +- pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + +- /* Bus specific */ +- err = bcma_bus_resume(bus); +- if (err) +- return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + +- return 0; +-} + #else /* CONFIG_PM */ +-# define bcma_host_pci_suspend NULL +-# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ + #endif /* CONFIG_PM */ + + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { +@@ -277,8 +278,7 @@ static struct pci_driver bcma_pci_bridge + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, +- .suspend = bcma_host_pci_suspend, +- .resume = bcma_host_pci_resume, ++ .driver.pm = BCMA_PM_OPS, + }; + + int __init bcma_host_pci_init(void) +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -13,6 +13,12 @@ + MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); + MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ + static int bcma_bus_match(struct device *dev, struct device_driver *drv); + static int bcma_device_probe(struct device *dev); + static int bcma_device_remove(struct device *dev); +@@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = { + .dev_attrs = bcma_device_attrs, + }; + +-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) + { + struct bcma_device *core; + +@@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor + } + return NULL; + } ++EXPORT_SYMBOL_GPL(bcma_find_core); + + static void bcma_release_core_dev(struct device *dev) + { +@@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; +- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: +@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct + } + } + +-int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) + { + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { +@@ -169,10 +180,8 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); +- } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); +- return -ENOENT; +- } + + /* Register found cores */ + bcma_register_cores(bus); +@@ -241,6 +250,21 @@ int __init bcma_bus_early_register(struc + } + + #ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ + int bcma_bus_resume(struct bcma_bus *bus) + { + struct bcma_device *core; +@@ -252,6 +276,15 @@ int bcma_bus_resume(struct bcma_bus *bus + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; + } + #endif +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -29,7 +29,7 @@ config BCMA_HOST_PCI + + config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" +- depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + +--- a/drivers/bcma/driver_chipcommon_pmu.c ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -2,8 +2,9 @@ + * Broadcom specific AMBA + * PCI Core + * +- * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -16,40 +17,41 @@ + * R/W ops. + **************************************************/ + +-static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); + } + + #if 0 + static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + #endif + + static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + u32 v; + int i; + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc + + static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 29); /* Read Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; +- pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); +- ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; + } + + static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + + /************************************************** +@@ -138,72 +145,53 @@ static void bcma_pcie_mdio_write(struct + + static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) + { +- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; + } + + static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) + { +- const u8 serdes_pll_device = 0x1D; +- const u8 serdes_rx_device = 0x1F; + u16 tmp; + +- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, +- bcma_pcicore_polarity_workaround(pc)); +- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); +- if (tmp & 0x4000) +- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); + } + + /************************************************** + * Init. + **************************************************/ + +-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) + { + bcma_pcicore_serdes_workaround(pc); + } + +-static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +-{ +- struct bcma_bus *bus = pc->core->bus; +- u16 chipid_top; +- +- chipid_top = (bus->chipinfo.id & 0xFF00); +- if (chipid_top != 0x4700 && +- chipid_top != 0x5300) +- return false; +- +-#ifdef CONFIG_SSB_DRIVER_PCICORE +- if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) +- return false; +-#endif /* CONFIG_SSB_DRIVER_PCICORE */ +- +-#if 0 +- /* TODO: on BCMA we use address from EROM instead of magic formula */ +- u32 tmp; +- return !mips_busprobe32(tmp, (bus->mmio + +- (pc->core->core_index * BCMA_CORE_SIZE))); +-#endif +- +- return true; +-} +- +-void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) + { + if (pc->setup_done) + return; + +- if (bcma_core_pci_is_in_hostmode(pc)) { + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); +-#else +- pr_err("Driver compiled without support for hostmode PCI\n"); + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ +- } else { +- bcma_core_pci_clientmode_init(pc); +- } + +- pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); + } + + int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -2,13 +2,588 @@ + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include "bcma_private.h" ++#include ++#include + #include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } ++ ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} + +-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) + { +- pr_err("No support for PCI core in hostmode yet\n"); ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; + } ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor + return NULL; + } + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) +@@ -353,6 +364,7 @@ static int bcma_get_next_core(struct bcm + void bcma_init_bus(struct bcma_bus *bus) + { + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; +@@ -363,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); +- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; +- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; +- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; + } + +@@ -392,6 +407,7 @@ int bcma_bus_scan(struct bcma_bus *bus) + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; +@@ -399,18 +415,23 @@ int bcma_bus_scan(struct bcma_bus *bus) + core->bus = bus; + + err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); +- if (err == -ENODEV) { +- core_num++; +- continue; +- } else if (err == -ENXIO) +- continue; +- else if (err == -ESPIPE) +- break; +- else if (err < 0) ++ if (err < 0) { ++ kfree(core); ++ if (err == -ENODEV) { ++ core_num++; ++ continue; ++ } else if (err == -ENXIO) { ++ continue; ++ } else if (err == -ESPIPE) { ++ break; ++ } + return err; ++ } + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", --- a/drivers/bcma/sprom.c +++ b/drivers/bcma/sprom.c -@@ -129,6 +129,9 @@ static void bcma_sprom_extract_r8(struct - u16 v; - int i; +@@ -2,6 +2,8 @@ + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +@@ -14,7 +16,57 @@ + #include + #include +-#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + + /************************************************** + * R/W ops. +@@ -124,37 +176,253 @@ static int bcma_sprom_valid(const u16 *s + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ + static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) + { +- u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); ++ + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; -+ + for (i = 0; i < 3; i++) { v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); -@@ -136,12 +139,70 @@ static void bcma_sprom_extract_r8(struct - - bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; - -+ bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -+ bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -+ SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -+ bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -+ bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -+ SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -+ -+ bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -+ bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -+ SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -+ bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -+ bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -+ SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -+ -+ bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -+ bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -+ SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -+ bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -+ bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -+ SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -+ -+ bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -+ bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -+ SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -+ bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -+ bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -+ SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -+ - bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; - bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; - bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; - bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; - - bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -+ -+ bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -+ -+ bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -+ bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -+ bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -+ bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -+ bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -+ SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; + } + +- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); + +- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; +- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; +- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; +- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } + +- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); } int bcma_sprom_get(struct bcma_bus *bus) ---- a/include/linux/bcma/bcma_driver_chipcommon.h -+++ b/include/linux/bcma/bcma_driver_chipcommon.h -@@ -203,6 +203,7 @@ - #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ - #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ - #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 -+#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 - #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ - #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ - #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ + { +- u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + +- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) +- return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); +@@ -164,11 +432,7 @@ int bcma_sprom_get(struct bcma_bus *bus) + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + +- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). +- * According to brcm80211 this applies to cards with PCIe rev >= 6 +- * TODO: understand this condition and use it */ +- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : +- BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -205,61 +205,82 @@ struct bcma_bus { +@@ -136,6 +136,7 @@ struct bcma_device { + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; +@@ -162,7 +163,7 @@ struct bcma_driver { + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); +- int (*suspend)(struct bcma_device *dev, pm_message_t state); ++ int (*suspend)(struct bcma_device *dev); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + +@@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_d + + extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ + struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; +@@ -195,6 +202,7 @@ struct bcma_bus { + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; +@@ -205,62 +213,84 @@ struct bcma_bus { struct ssb_sprom sprom; }; @@ -263,5 +1755,266 @@ + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); +} ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); + extern int bcma_core_enable(struct bcma_device *core, u32 flags); +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -56,6 +56,9 @@ + #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 + #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 + #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ + #define BCMA_CC_OTPC 0x0014 /* OTP control */ + #define BCMA_CC_OTPC_RECWAIT 0xFF000000 + #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +@@ -72,6 +75,8 @@ + #define BCMA_CC_OTPP_READ 0x40000000 + #define BCMA_CC_OTPP_START 0x80000000 + #define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ + #define BCMA_CC_IRQSTAT 0x0020 + #define BCMA_CC_IRQMASK 0x0024 + #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +@@ -79,6 +84,10 @@ + #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ + #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ + #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 + #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ + #define BCMA_CC_JCMD_START 0x80000000 + #define BCMA_CC_JCMD_BUSY 0x80000000 +@@ -181,6 +190,22 @@ + #define BCMA_CC_FLASH_CFG 0x0128 + #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ + #define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 + /* 0x1E0 is defined as shared BCMA_CLKCTLST */ + #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define BCMA_CC_UART0_DATA 0x0300 +@@ -203,6 +228,7 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ + #define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +@@ -239,7 +265,6 @@ + #define BCMA_CC_PLLCTL_ADDR 0x0660 + #define BCMA_CC_PLLCTL_DATA 0x0664 + #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + + /* Divider allocation in 4716/47162/5356 */ + #define BCMA_CC_PMU5_MAINPLL_CPU 1 +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -53,6 +53,35 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 + #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ + #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ + #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +@@ -72,20 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ + #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ + /* PCIcore specific boardflags */ + #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ + struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif + }; + + /* Register access */ + #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) + #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +-extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ +--- a/include/linux/bcma/bcma_regs.h ++++ b/include/linux/bcma/bcma_regs.h +@@ -56,4 +56,31 @@ + #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ + #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ + #endif /* LINUX_BCMA_REGS_H_ */ diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch index 4435315d36..708c7ded34 100644 --- a/target/linux/generic/patches-3.3/020-ssb_update.patch +++ b/target/linux/generic/patches-3.3/020-ssb_update.patch @@ -1,6 +1,211 @@ +--- a/drivers/ssb/driver_chipcommon_pmu.c ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -13,6 +13,9 @@ + #include + #include + #include ++#ifdef CONFIG_BCM47XX ++#include ++#endif + + #include "ssb_private.h" + +@@ -92,10 +95,6 @@ static void ssb_pmu0_pllinit_r0(struct s + u32 pmuctl, tmp, pllctl; + unsigned int i; + +- if ((bus->chip_id == 0x5354) && !crystalfreq) { +- /* The 5354 crystal freq is 25MHz */ +- crystalfreq = 25000; +- } + if (crystalfreq) + e = pmu0_plltab_find_entry(crystalfreq); + if (!e) +@@ -321,7 +320,11 @@ static void ssb_pmu_pll_init(struct ssb_ + u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */ + + if (bus->bustype == SSB_BUSTYPE_SSB) { +- /* TODO: The user may override the crystal frequency. */ ++#ifdef CONFIG_BCM47XX ++ char buf[20]; ++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0) ++ crystalfreq = simple_strtoul(buf, NULL, 0); ++#endif + } + + switch (bus->chip_id) { +@@ -330,7 +333,11 @@ static void ssb_pmu_pll_init(struct ssb_ + ssb_pmu1_pllinit_r0(cc, crystalfreq); + break; + case 0x4328: ++ ssb_pmu0_pllinit_r0(cc, crystalfreq); ++ break; + case 0x5354: ++ if (crystalfreq == 0) ++ crystalfreq = 25000; + ssb_pmu0_pllinit_r0(cc, crystalfreq); + break; + case 0x4322: +@@ -607,3 +614,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch + + EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); + EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ++ ++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */ ++ return 240000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU cpu clock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} ++ ++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x5354: ++ return 120000000; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "ERROR: PMU controlclock unknown for device %04X\n", ++ bus->chip_id); ++ return 0; ++ } ++} +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -140,19 +140,6 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } + +-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) +-{ +- if (drv) +- get_driver(&drv->drv); +- return drv; +-} +- +-static inline void ssb_driver_put(struct ssb_driver *drv) +-{ +- if (drv) +- put_driver(&drv->drv); +-} +- + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -250,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b + ssb_device_put(sdev); + continue; + } +- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); +- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { +- ssb_device_put(sdev); ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv->remove)) + continue; +- } + sdrv->remove(sdev); + ctx->device_frozen[i] = 1; + } +@@ -293,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c + dev_name(sdev->dev)); + result = err; + } +- ssb_driver_put(sdrv); + ssb_device_put(sdev); + } + +@@ -1094,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus) + u32 plltype; + u32 clkctl_n, clkctl_m; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_controlclock(&bus->chipco); ++ + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb +@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss + { + int i; + u16 v; +- s8 gain; + u16 loc[3]; + + if (out->revision == 3) /* rev 3 moved MAC */ +@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_BG, +- SSB_SPROM1_AGAIN_BG_SHIFT); +- out->antenna_gain.ghz24.a0 = gain; +- out->antenna_gain.ghz24.a1 = gain; +- out->antenna_gain.ghz24.a2 = gain; +- out->antenna_gain.ghz24.a3 = gain; +- gain = r123_extract_antgain(out->revision, in, +- SSB_SPROM1_AGAIN_A, +- SSB_SPROM1_AGAIN_A_SHIFT); +- out->antenna_gain.ghz5.a0 = gain; +- out->antenna_gain.ghz5.a1 = gain; +- out->antenna_gain.ghz5.a2 = gain; +- out->antenna_gain.ghz5.a3 = gain; ++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_BG, ++ SSB_SPROM1_AGAIN_BG_SHIFT); ++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, ++ SSB_SPROM1_AGAIN_A, ++ SSB_SPROM1_AGAIN_A_SHIFT); + } + + /* Revs 4 5 and 8 have partially shared layout */ +@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb + } + + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); + + sprom_extract_r458(out, in); + +@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -15,10 +220,25 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -607,6 +613,38 @@ static void sprom_extract_r8(struct ssb_ - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); +@@ -596,16 +591,46 @@ static void sprom_extract_r8(struct ssb_ + SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + /* Extract the antenna gain values. */ +- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); +- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01, ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, + SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); +- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); +- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23, ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, + SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); +- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, +- sizeof(out->antenna_gain.ghz5)); ++ + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -50,10 +270,74 @@ + SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); + } -+ + /* Extract FEM info */ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, - SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -318,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->chip_package = 0; + } + } ++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and " ++ "package 0x%02X\n", bus->chip_id, bus->chip_rev, ++ bus->chip_package); + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -207,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex + } + #endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + ++/* driver_chipcommon_pmu.c */ ++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc); ++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc); ++ + #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -16,6 +16,12 @@ struct pcmcia_device; @@ -63,13 +347,54 @@ +struct ssb_sprom_core_pwr_info { + u8 itssi_2g, itssi_5g; + u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; -+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4]; +}; + struct ssb_sprom { u8 revision; u8 il0mac[6]; /* MAC address for 802.11b/g */ -@@ -82,6 +88,8 @@ struct ssb_sprom { +@@ -26,9 +32,12 @@ struct ssb_sprom { + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u16 board_rev; /* Board revision number from SPROM. */ ++ u16 board_num; /* Board number from SPROM. */ ++ u16 board_type; /* Board type from SPROM. */ + u8 country_code; /* Country Code */ +- u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ +- u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ char alpha2[2]; /* Country Code as two chars like EU or US */ ++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ + u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ + u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; +@@ -47,10 +56,10 @@ struct ssb_sprom { + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u8 tri2g; /* 2.4GHz TX isolation */ +@@ -61,8 +70,8 @@ struct ssb_sprom { + u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ + u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ + u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ +- u8 rxpo2g; /* 2GHz RX power offset */ +- u8 rxpo5g; /* 5GHz RX power offset */ ++ s8 rxpo2g; /* 2GHz RX power offset */ ++ s8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ + u8 rssismc2g; + u8 rssismf2g; +@@ -82,16 +91,13 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -78,6 +403,108 @@ /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ + struct { +- struct { +- s8 a0, a1, a2, a3; +- } ghz24; /* 2.4GHz band */ +- struct { +- s8 a0, a1, a2, a3; +- } ghz5; /* 5GHz band */ ++ s8 a0, a1, a2, a3; + } antenna_gain; + + struct { +@@ -103,7 +109,79 @@ struct ssb_sprom { + } ghz5; + } fem; + +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ u16 mcs2gpo[8]; ++ u16 mcs5gpo[8]; ++ u16 mcs5glpo[8]; ++ u16 mcs5ghpo[8]; ++ u8 opo; ++ ++ u8 rxgainerr2ga[3]; ++ u8 rxgainerr5gla[3]; ++ u8 rxgainerr5gma[3]; ++ u8 rxgainerr5gha[3]; ++ u8 rxgainerr5gua[3]; ++ ++ u8 noiselvl2ga[3]; ++ u8 noiselvl5gla[3]; ++ u8 noiselvl5gma[3]; ++ u8 noiselvl5gha[3]; ++ u8 noiselvl5gua[3]; ++ ++ u8 regrev; ++ u8 txchain; ++ u8 rxchain; ++ u8 antswitch; ++ u16 cddpo; ++ u16 stbcpo; ++ u16 bw40po; ++ u16 bwduppo; ++ ++ u8 tempthresh; ++ u8 tempoffset; ++ u16 rawtempsense; ++ u8 measpower; ++ u8 tempsense_slope; ++ u8 tempcorrx; ++ u8 tempsense_option; ++ u8 freqoffset_corr; ++ u8 iqcal_swp_dis; ++ u8 hw_iqcal_en; ++ u8 elna2g; ++ u8 elna5g; ++ u8 phycal_tempdelta; ++ u8 temps_period; ++ u8 temps_hysteresis; ++ u8 measpower1; ++ u8 measpower2; ++ u8 pcieingress_war; ++ ++ /* power per rate from sromrev 9 */ ++ u16 cckbw202gpo; ++ u16 cckbw20ul2gpo; ++ u32 legofdmbw202gpo; ++ u32 legofdmbw20ul2gpo; ++ u32 legofdmbw205glpo; ++ u32 legofdmbw20ul5glpo; ++ u32 legofdmbw205gmpo; ++ u32 legofdmbw20ul5gmpo; ++ u32 legofdmbw205ghpo; ++ u32 legofdmbw20ul5ghpo; ++ u32 mcsbw202gpo; ++ u32 mcsbw20ul2gpo; ++ u32 mcsbw402gpo; ++ u32 mcsbw205glpo; ++ u32 mcsbw20ul5glpo; ++ u32 mcsbw405glpo; ++ u32 mcsbw205gmpo; ++ u32 mcsbw20ul5gmpo; ++ u32 mcsbw405gmpo; ++ u32 mcsbw205ghpo; ++ u32 mcsbw20ul5ghpo; ++ u32 mcsbw405ghpo; ++ u16 mcs32po; ++ u16 legofdm40duppo; ++ u8 sar2g; ++ u8 sar5g; + }; + + /* Information about the PCB the circuitry is soldered on. */ +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include ++#include + #include + #include + --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -449,6 +449,39 @@ diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch new file mode 100644 index 0000000000..7117fbaf15 --- /dev/null +++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch @@ -0,0 +1,1748 @@ +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -29,7 +29,7 @@ config BCMA_HOST_PCI + + config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" +- depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + +--- a/drivers/bcma/bcma_private.h ++++ b/drivers/bcma/bcma_private.h +@@ -13,7 +13,7 @@ + struct bcma_bus; + + /* main.c */ +-int bcma_bus_register(struct bcma_bus *bus); ++int __devinit bcma_bus_register(struct bcma_bus *bus); + void bcma_bus_unregister(struct bcma_bus *bus); + int __init bcma_bus_early_register(struct bcma_bus *bus, + struct bcma_device *core_cc, +@@ -48,8 +48,12 @@ extern int __init bcma_host_pci_init(voi + extern void __exit bcma_host_pci_exit(void); + #endif /* CONFIG_BCMA_HOST_PCI */ + ++/* driver_pci.c */ ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address); ++ + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc); ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ + + #endif +--- a/drivers/bcma/driver_chipcommon_pmu.c ++++ b/drivers/bcma/driver_chipcommon_pmu.c +@@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru + min_msk = 0x200D; + max_msk = 0xFFFF; + break; ++ case 0x4331: + case 43224: + case 43225: + break; +--- a/drivers/bcma/driver_pci.c ++++ b/drivers/bcma/driver_pci.c +@@ -2,8 +2,9 @@ + * Broadcom specific AMBA + * PCI Core + * +- * Copyright 2005, Broadcom Corporation ++ * Copyright 2005, 2011, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -16,40 +17,41 @@ + * R/W ops. + **************************************************/ + +-static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) ++u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- return pcicore_read32(pc, 0x134); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); + } + + #if 0 + static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) + { +- pcicore_write32(pc, 0x130, address); +- pcicore_read32(pc, 0x130); +- pcicore_write32(pc, 0x134, data); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); + } + #endif + + static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + u32 v; + int i; + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- v |= (0x1F << 18); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (BCMA_CORE_PCI_MDIODATA_BLK_ADDR << ++ BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= (phy << 4); +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + + udelay(10); + for (i = 0; i < 200; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc + + static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 29); /* Read Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; +- pcicore_write32(pc, mdio_data, v); ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_READ; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; ++ ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) { ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) { + udelay(10); +- ret = pcicore_read32(pc, mdio_data); ++ ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA); + break; + } + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + return ret; + } + + static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) + { +- const u16 mdio_control = 0x128; +- const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + +- v = 0x80; /* Enable Preamble Sequence */ +- v |= 0x2; /* MDIO Clock Divisor */ +- pcicore_write32(pc, mdio_control, v); ++ /* enable mdio access to SERDES */ ++ v = BCMA_CORE_PCI_MDIOCTL_PREAM_EN; ++ v |= BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL; ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); ++ v = (BCMA_CORE_PCI_MDIODATA_DEV_ADDR << ++ BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF); ++ } else { ++ v = (device << BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD); ++ v |= (address << BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD); + } + +- v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ +- v |= (1 << 17); /* Turnaround */ +- if (pc->core->id.rev < 10) +- v |= (u32)device << 22; +- v |= (u32)address << 18; ++ v = BCMA_CORE_PCI_MDIODATA_START; ++ v |= BCMA_CORE_PCI_MDIODATA_WRITE; ++ v |= BCMA_CORE_PCI_MDIODATA_TA; + v |= data; +- pcicore_write32(pc, mdio_data, v); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_DATA, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { +- v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); ++ if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) + break; + msleep(1); + } +- pcicore_write32(pc, mdio_control, 0); ++ pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); + } + + /************************************************** +@@ -138,72 +145,53 @@ static void bcma_pcie_mdio_write(struct + + static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) + { +- return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++ u32 tmp; ++ ++ tmp = bcma_pcie_read(pc, BCMA_CORE_PCI_PLP_STATUSREG); ++ if (tmp & BCMA_CORE_PCI_PLP_POLARITYINV_STAT) ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE | ++ BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY; ++ else ++ return BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE; + } + + static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) + { +- const u8 serdes_pll_device = 0x1D; +- const u8 serdes_rx_device = 0x1F; + u16 tmp; + +- bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, +- bcma_pcicore_polarity_workaround(pc)); +- tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); +- if (tmp & 0x4000) +- bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_RX, ++ BCMA_CORE_PCI_SERDES_RX_CTRL, ++ bcma_pcicore_polarity_workaround(pc)); ++ tmp = bcma_pcie_mdio_read(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL); ++ if (tmp & BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN) ++ bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, ++ BCMA_CORE_PCI_SERDES_PLL_CTRL, ++ tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); + } + + /************************************************** + * Init. + **************************************************/ + +-static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) ++static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) + { + bcma_pcicore_serdes_workaround(pc); + } + +-static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) +-{ +- struct bcma_bus *bus = pc->core->bus; +- u16 chipid_top; +- +- chipid_top = (bus->chipinfo.id & 0xFF00); +- if (chipid_top != 0x4700 && +- chipid_top != 0x5300) +- return false; +- +-#ifdef CONFIG_SSB_DRIVER_PCICORE +- if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI) +- return false; +-#endif /* CONFIG_SSB_DRIVER_PCICORE */ +- +-#if 0 +- /* TODO: on BCMA we use address from EROM instead of magic formula */ +- u32 tmp; +- return !mips_busprobe32(tmp, (bus->mmio + +- (pc->core->core_index * BCMA_CORE_SIZE))); +-#endif +- +- return true; +-} +- +-void bcma_core_pci_init(struct bcma_drv_pci *pc) ++void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) + { + if (pc->setup_done) + return; + +- if (bcma_core_pci_is_in_hostmode(pc)) { + #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ pc->hostmode = bcma_core_pci_is_in_hostmode(pc); ++ if (pc->hostmode) + bcma_core_pci_hostmode_init(pc); +-#else +- pr_err("Driver compiled without support for hostmode PCI\n"); + #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ +- } else { +- bcma_core_pci_clientmode_init(pc); +- } + +- pc->setup_done = true; ++ if (!pc->hostmode) ++ bcma_core_pci_clientmode_init(pc); + } + + int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, +--- a/drivers/bcma/driver_pci_host.c ++++ b/drivers/bcma/driver_pci_host.c +@@ -2,13 +2,588 @@ + * Broadcom specific AMBA + * PCI Core in hostmode + * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include "bcma_private.h" ++#include ++#include + #include ++#include ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } ++ ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} + +-void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) + { +- pr_err("No support for PCI core in hostmode yet\n"); ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, len); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, ++ 0x04000000); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; + } ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); +--- a/drivers/bcma/host_pci.c ++++ b/drivers/bcma/host_pci.c +@@ -154,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci + .awrite32 = bcma_host_pci_awrite32, + }; + +-static int bcma_host_pci_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct bcma_bus *bus; + int err = -ENOMEM; +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -13,6 +13,12 @@ + MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); + MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ + static int bcma_bus_match(struct device *dev, struct device_driver *drv); + static int bcma_device_probe(struct device *dev); + static int bcma_device_remove(struct device *dev); +@@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = { + .dev_attrs = bcma_device_attrs, + }; + +-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) + { + struct bcma_device *core; + +@@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor + } + return NULL; + } ++EXPORT_SYMBOL_GPL(bcma_find_core); + + static void bcma_release_core_dev(struct device *dev) + { +@@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; +- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: +@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct + } + } + +-int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) + { + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { +--- a/drivers/bcma/scan.c ++++ b/drivers/bcma/scan.c +@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor + return NULL; + } + ++static struct bcma_device *bcma_find_core_reverse(struct bcma_bus *bus, u16 coreid) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if (core->id.id == coreid) ++ return core; ++ } ++ return NULL; ++} ++ + static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, + struct bcma_device_id *match, int core_num, + struct bcma_device *core) +@@ -353,6 +364,7 @@ static int bcma_get_next_core(struct bcm + void bcma_init_bus(struct bcma_bus *bus) + { + s32 tmp; ++ struct bcma_chipinfo *chipinfo = &(bus->chipinfo); + + if (bus->init_done) + return; +@@ -363,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); +- bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; +- bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; +- bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ chipinfo->id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; ++ chipinfo->rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; ++ chipinfo->pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; ++ pr_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n", ++ chipinfo->id, chipinfo->rev, chipinfo->pkg); ++ + bus->init_done = true; + } + +@@ -392,6 +407,7 @@ int bcma_bus_scan(struct bcma_bus *bus) + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { ++ struct bcma_device *other_core; + struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); + if (!core) + return -ENOMEM; +@@ -414,6 +430,8 @@ int bcma_bus_scan(struct bcma_bus *bus) + + core->core_index = core_num++; + bus->nr_cores++; ++ other_core = bcma_find_core_reverse(bus, core->id.id); ++ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1; + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", +--- a/drivers/bcma/sprom.c ++++ b/drivers/bcma/sprom.c +@@ -2,6 +2,8 @@ + * Broadcom specific AMBA + * SPROM reading + * ++ * Copyright 2011, 2012, Hauke Mehrtens ++ * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +@@ -14,7 +16,57 @@ + #include + #include + +-#define SPOFF(offset) ((offset) / sizeof(u16)) ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} + + /************************************************** + * R/W ops. +@@ -124,10 +176,21 @@ static int bcma_sprom_valid(const u16 *s + * SPROM extraction. + **************************************************/ + ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ + static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) + { +- u16 v; ++ u16 v, o; + int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); + + bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & + SSB_SPROM_REVISION_REV; +@@ -137,85 +200,229 @@ static void bcma_sprom_extract_r8(struct + *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); + } + +- bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)]; ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); + +- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & +- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; +- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & +- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; +- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & +- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; +- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & +- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; +- +- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & +- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; +- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & +- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; +- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & +- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; +- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & +- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; +- +- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & +- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; +- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & +- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; +- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & +- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; +- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & +- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; +- +- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & +- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; +- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & +- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; +- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & +- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; +- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & +- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; +- +- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; +- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; +- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; +- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; +- +- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; +- +- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; +- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; +- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; +- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; +- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +- +- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; +- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; +- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; +- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; +- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); + } + + int bcma_sprom_get(struct bcma_bus *bus) + { +- u16 offset; ++ u16 offset = BCMA_CC_SPROM; + u16 *sprom; + int err = 0; + + if (!bus->drv_cc.core) + return -EOPNOTSUPP; + +- if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) +- return -ENOENT; ++ if (!bcma_sprom_ext_available(bus)) { ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ if (bcma_sprom_onchip_available(bus)) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } + + sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); +@@ -225,11 +432,7 @@ int bcma_sprom_get(struct bcma_bus *bus) + if (bus->chipinfo.id == 0x4331) + bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); + +- /* Most cards have SPROM moved by additional offset 0x30 (48 dwords). +- * According to brcm80211 this applies to cards with PCIe rev >= 6 +- * TODO: understand this condition and use it */ +- offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM : +- BCMA_CC_SPROM_PCIE6; ++ pr_debug("SPROM offset 0x%x\n", offset); + bcma_sprom_read(bus, offset, sprom); + + if (bus->chipinfo.id == 0x4331) +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -136,6 +136,7 @@ struct bcma_device { + bool dev_registered; + + u8 core_index; ++ u8 core_unit; + + u32 addr; + u32 wrap; +@@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_d + + extern void bcma_driver_unregister(struct bcma_driver *drv); + ++/* Set a fallback SPROM. ++ * See kdoc at the function definition for complete documentation. */ ++extern int bcma_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)); ++ + struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; +@@ -195,6 +202,7 @@ struct bcma_bus { + struct list_head cores; + u8 nr_cores; + u8 init_done:1; ++ u8 num; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; +@@ -282,6 +290,7 @@ static inline void bcma_maskset16(struct + bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); + } + ++extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); + extern bool bcma_core_is_enabled(struct bcma_device *core); + extern void bcma_core_disable(struct bcma_device *core, u32 flags); + extern int bcma_core_enable(struct bcma_device *core, u32 flags); +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -56,6 +56,9 @@ + #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 + #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 + #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 ++#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ ++#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 ++#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ + #define BCMA_CC_OTPC 0x0014 /* OTP control */ + #define BCMA_CC_OTPC_RECWAIT 0xFF000000 + #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +@@ -72,6 +75,8 @@ + #define BCMA_CC_OTPP_READ 0x40000000 + #define BCMA_CC_OTPP_START 0x80000000 + #define BCMA_CC_OTPP_BUSY 0x80000000 ++#define BCMA_CC_OTPL 0x001C /* OTP layout */ ++#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ + #define BCMA_CC_IRQSTAT 0x0020 + #define BCMA_CC_IRQMASK 0x0024 + #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +@@ -79,6 +84,10 @@ + #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ + #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ + #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ ++#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 ++#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 ++#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 + #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ + #define BCMA_CC_JCMD_START 0x80000000 + #define BCMA_CC_JCMD_BUSY 0x80000000 +@@ -181,6 +190,22 @@ + #define BCMA_CC_FLASH_CFG 0x0128 + #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ + #define BCMA_CC_FLASH_WAITCNT 0x012C ++#define BCMA_CC_SROM_CONTROL 0x0190 ++#define BCMA_CC_SROM_CONTROL_START 0x80000000 ++#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 ++#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 ++#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 ++#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 ++#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 ++#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 ++#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 ++#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 ++#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 ++#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 ++#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 ++#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 + /* 0x1E0 is defined as shared BCMA_CLKCTLST */ + #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define BCMA_CC_UART0_DATA 0x0300 +@@ -240,7 +265,6 @@ + #define BCMA_CC_PLLCTL_ADDR 0x0660 + #define BCMA_CC_PLLCTL_DATA 0x0664 + #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ +-#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ + + /* Divider allocation in 4716/47162/5356 */ + #define BCMA_CC_PMU5_MAINPLL_CPU 1 +--- a/include/linux/bcma/bcma_driver_pci.h ++++ b/include/linux/bcma/bcma_driver_pci.h +@@ -53,6 +53,35 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 + #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ + #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 ++#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ ++#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ ++#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ ++#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 ++#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ ++#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ ++#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ ++#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ ++#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ ++#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ ++#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ ++#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ ++#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ ++#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ ++#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ + #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ + #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +@@ -72,20 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ + #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + ++/* PCIE protocol PHY diagnostic registers */ ++#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ ++#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ ++#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ ++#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ ++#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ ++#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ ++#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ ++#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ ++#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ ++#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ ++#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ ++#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ ++#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ ++#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ ++#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ ++#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ ++#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ ++ ++/* PCIE protocol DLLP diagnostic registers */ ++#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ ++#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ ++#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ ++#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) ++#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ ++#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ ++#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ ++#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ ++#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ ++#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ ++#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ ++#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ ++#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ ++#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ ++#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ ++#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ ++#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ ++#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ ++ ++/* SERDES RX registers */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ ++#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ ++#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ ++#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ ++#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ ++ ++/* SERDES PLL registers */ ++#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ ++#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ ++ + /* PCIcore specific boardflags */ + #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + ++/* PCIE Config space accessing MACROS */ ++#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ ++#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ ++#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ ++#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ ++ ++#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ ++#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ ++#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ ++#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ ++ ++/* PCIE Root Capability Register bits (Host mode only) */ ++#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 ++ ++struct bcma_drv_pci; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++struct bcma_drv_pci_host { ++ struct bcma_drv_pci *pdev; ++ ++ u32 host_cfg_addr; ++ spinlock_t cfgspace_lock; ++ ++ struct pci_controller pci_controller; ++ struct pci_ops pci_ops; ++ struct resource mem_resource; ++ struct resource io_resource; ++}; ++#endif ++ + struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; ++ u8 hostmode:1; ++ ++#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE ++ struct bcma_drv_pci_host *host_controller; ++#endif + }; + + /* Register access */ + #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) + #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +-extern void bcma_core_pci_init(struct bcma_drv_pci *pc); ++extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); + extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); + ++extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); ++extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); ++ + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ +--- a/include/linux/bcma/bcma_regs.h ++++ b/include/linux/bcma/bcma_regs.h +@@ -56,4 +56,31 @@ + #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ + #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + ++/* SiliconBackplane Address Map. ++ * All regions may not exist on all chips. ++ */ ++#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ ++#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) ++#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ ++#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ ++ ++ ++#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ ++#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ ++#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), low 32 bits ++ */ ++#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ ++#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ ++#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ ++#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 ++ * (2 ZettaBytes), high 32 bits ++ */ ++ + #endif /* LINUX_BCMA_REGS_H_ */