From: John Crispin <john@openwrt.org>
Date: Mon, 6 Oct 2014 20:08:18 +0000 (+0000)
Subject: lantiq - vgv7519: enable pci bus
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6a961da2318a808c2d8a041d530a03fa9542d735;p=openwrt%2Fstaging%2Fansuel.git

lantiq - vgv7519: enable pci bus

SVN-Revision: 42823
---

diff --git a/target/linux/lantiq/dts/VGV7519.dtsi b/target/linux/lantiq/dts/VGV7519.dtsi
index fafcf5ed14..d652839d40 100644
--- a/target/linux/lantiq/dts/VGV7519.dtsi
+++ b/target/linux/lantiq/dts/VGV7519.dtsi
@@ -188,10 +188,11 @@
 		};
 
 		pci@E105400 {
+			status = "okay";
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
-			compatible = "lantiq,pci-xway1";
+			compatible = "lantiq,pci-xway";
 			bus-range = <0x0 0x0>;
 			ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 				0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
@@ -205,7 +206,7 @@
 			interrupt-map = <
 				0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
 				>;
-			gpios-reset = <&gpio 21 0>;
+			gpio-reset = <&gpio 21 0>;
 			req-mask = <0x1>;	/* GNT1 */
 		};
 	};
diff --git a/target/linux/lantiq/xrx200/config-3.14 b/target/linux/lantiq/xrx200/config-3.14
index 959bf6af01..3d525a42f9 100644
--- a/target/linux/lantiq/xrx200/config-3.14
+++ b/target/linux/lantiq/xrx200/config-3.14
@@ -44,7 +44,7 @@ CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_NLS=y
 CONFIG_PCIE_LANTIQ=y
-# CONFIG_PCI_LANTIQ is not set
+CONFIG_PCI_LANTIQ=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RTL8306_PHY=y