From: Johannes Berg Date: Fri, 14 Sep 2007 15:10:25 +0000 (-0400) Subject: [MAC80211]: remove HW_KEY_IDX_INVALID X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6a7664d451e7014b1a6828e50ccb3308d0b84816;p=openwrt%2Fstaging%2Fblogic.git [MAC80211]: remove HW_KEY_IDX_INVALID This patch makes the mac80211/driver interface rely only on the IEEE80211_TXCTL_DO_NOT_ENCRYPT flag to signal to the driver whether a frame should be encrypted or not, since mac80211 internally no longer relies on HW_KEY_IDX_INVALID either this removes it, changes the key index to be a u8 in all places and makes the full range of the value available to drivers. Signed-off-by: Johannes Berg Acked-by: Michael Wu Signed-off-by: John W. Linville Signed-off-by: David S. Miller --- diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 950a4827507f..652dced0f3ec 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -164,7 +164,6 @@ struct ieee80211_low_level_stats { /* Transmit control fields. This data structure is passed to low-level driver * with each TX frame. The low-level driver is responsible for configuring * the hardware to use given values (depending on what is supported). */ -#define HW_KEY_IDX_INVALID -1 struct ieee80211_tx_control { int tx_rate; /* Transmit rate, given as the hw specific value for the @@ -197,13 +196,13 @@ struct ieee80211_tx_control { * long retry value */ u32 flags; /* tx control flags defined * above */ + u8 key_idx; /* keyidx from hw->set_key(), undefined if + * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */ u8 power_level; /* per-packet transmit power level, in dBm */ u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */ - s8 key_idx; /* HW_KEY_IDX_INVALID = do not encrypt, - * other values: keyidx from hw->set_key() */ u8 icv_len; /* length of the ICV/MIC field in octets */ u8 iv_len; /* length of the IV field in octets */ u8 tkip_key[16]; /* generated phase2/phase1 key for hw TKIP */ @@ -467,8 +466,7 @@ enum ieee80211_key_flags { * * @hw_key_idx: To be set by the driver, this is the key index the driver * wants to be given when a frame is transmitted and needs to be - * encrypted in hardware. It defaults to %HW_KEY_IDX_INVALID which - * the driver may not use. + * encrypted in hardware. * @alg: The key algorithm. * @flags: key flags, see &enum ieee80211_key_flags. * @keyidx: the key index (0-3) @@ -476,8 +474,8 @@ enum ieee80211_key_flags { * @key: key material */ struct ieee80211_key_conf { - int hw_key_idx; ieee80211_key_alg alg; + u8 hw_key_idx; u8 flags; s8 keyidx; u8 keylen; @@ -686,9 +684,10 @@ struct ieee80211_ops { * selected by the low-level driver. * * Return 0 if the key is now in use, -EOPNOTSUPP or -ENOSPC if it - * couldn't be added; if you return 0 then hw_key_idx must be - * assigned to something other than HW_KEY_IDX_INVALID. When the cmd - * is DISABLE_KEY then it must succeed. + * couldn't be added; if you return 0 then hw_key_idx must be assigned + * to the hardware key index, you are free to use the full u8 range. + * + * When the cmd is DISABLE_KEY then it must succeed. * * Note that it is permissible to not decrypt a frame even if a key * for it has been uploaded to hardware, the stack will not make any diff --git a/net/mac80211/key.c b/net/mac80211/key.c index b10e33deb63e..dd6fc4aa3ff5 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -73,8 +73,6 @@ static void ieee80211_key_enable_hw_accel(struct ieee80211_key *key) key->sdata->dev->dev_addr, addr, &key->conf); - WARN_ON(!ret && (key->conf.hw_key_idx == HW_KEY_IDX_INVALID)); - if (!ret) key->flags |= KEY_FLAG_UPLOADED_TO_HARDWARE; @@ -109,7 +107,6 @@ static void ieee80211_key_disable_hw_accel(struct ieee80211_key *key) key->conf.keyidx, MAC_ARG(addr), ret); key->flags &= ~KEY_FLAG_UPLOADED_TO_HARDWARE; - key->conf.hw_key_idx = HW_KEY_IDX_INVALID; } struct ieee80211_key *ieee80211_key_alloc(struct ieee80211_sub_if_data *sdata, @@ -132,7 +129,6 @@ struct ieee80211_key *ieee80211_key_alloc(struct ieee80211_sub_if_data *sdata, * Default to software encryption; we'll later upload the * key to the hardware if possible. */ - key->conf.hw_key_idx = HW_KEY_IDX_INVALID; key->conf.flags = 0; key->flags = 0; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e2ae1e1fcc7b..3d57e6d80f6d 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -430,8 +430,6 @@ ieee80211_tx_h_select_key(struct ieee80211_txrx_data *tx) { struct ieee80211_key *key; - tx->u.tx.control->key_idx = HW_KEY_IDX_INVALID; - if (unlikely(tx->u.tx.control->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) tx->key = NULL; else if (tx->sta && (key = rcu_dereference(tx->sta->key))) @@ -442,8 +440,10 @@ ieee80211_tx_h_select_key(struct ieee80211_txrx_data *tx) !(tx->sdata->eapol && ieee80211_is_eapol(tx->skb))) { I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted); return TXRX_DROP; - } else + } else { tx->key = NULL; + tx->u.tx.control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; + } if (tx->key) { tx->key->tx_rx_count++; @@ -724,6 +724,15 @@ ieee80211_tx_h_misc(struct ieee80211_txrx_data *tx) } } + /* + * Tell hardware to not encrypt when we had sw crypto. + * Because we use the same flag to internally indicate that + * no (software) encryption should be done, we have to set it + * after all crypto handlers. + */ + if (tx->key && !(tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) + tx->u.tx.control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT; + return TXRX_CONTINUE; } @@ -833,7 +842,6 @@ __ieee80211_parse_tx_radiotap( */ control->retry_limit = 1; /* no retry */ - control->key_idx = HW_KEY_IDX_INVALID; control->flags &= ~(IEEE80211_TXCTL_USE_RTS_CTS | IEEE80211_TXCTL_USE_CTS_PROTECT); control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT |