From: Pawel Moll Date: Fri, 9 Dec 2011 18:47:39 +0000 (+0000) Subject: ARM: vexpress: Motherboard RS1 memory map support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=6a3719562b69ffdfc36e829e19b35fda6ab19ca6;p=openwrt%2Fstaging%2Fblogic.git ARM: vexpress: Motherboard RS1 memory map support This patch adds support for RS1 memory map based Versatile Express motherboard. Signed-off-by: Pawel Moll --- diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi new file mode 100644 index 000000000000..16076e2d0934 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -0,0 +1,201 @@ +/* + * ARM Ltd. Versatile Express + * + * Motherboard Express uATX + * V2M-P1 + * + * HBI-0190D + * + * RS1 memory map ("ARM Cortex-A Series memory map" in the board's + * Technical Reference Manual) + * + * WARNING! The hardware described in this file is independent from the + * original variant (vexpress-v2m.dtsi), but there is a strong + * correspondence between the two configurations. + * + * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT + * CHANGES TO vexpress-v2m.dtsi! + */ + +/ { + aliases { + arm,v2m_timer = &v2m_timer01; + }; + + motherboard { + compatible = "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + psram@1,00000000 { + compatible = "arm,vexpress-psram", "mtd-ram"; + reg = <1 0x00000000 0x02000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + }; + + usb@2,03000000 { + compatible = "nxp,usb-isp1761"; + reg = <2 0x03000000 0x20000>; + interrupts = <16>; + port1-otg; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + }; + + /* PCI-E I2C bus */ + v2m_i2c_pcie: i2c@030000 { + compatible = "arm,versatile-i2c"; + reg = <0x030000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + pcie-switch@60 { + compatible = "idt,89hpes32h8"; + reg = <0x60>; + }; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + }; + + /* DVI I2C bus */ + v2m_i2c_dvi: i2c@160000 { + compatible = "arm,versatile-i2c"; + reg = <0x160000 0x1000>; + + #address-cells = <1>; + #size-cells = <0>; + + dvi-transmitter@39 { + compatible = "sil,sii9022-tpi", "sil,sii9022"; + reg = <0x39>; + }; + + dvi-transmitter@60 { + compatible = "sil,sii9022-cpi", "sil,sii9022"; + reg = <0x60>; + }; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + }; + + compact-flash@1a0000 { + compatible = "arm,vexpress-cf", "ata-generic"; + reg = <0x1a0000 0x100 + 0x1a0100 0xf00>; + reg-shift = <2>; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + }; + }; + }; +}; diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S index fd9e6c7ea49f..fa8224794e0b 100644 --- a/arch/arm/mach-vexpress/include/mach/debug-macro.S +++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S @@ -10,12 +10,34 @@ * published by the Free Software Foundation. */ -#define DEBUG_LL_UART_OFFSET 0x00009000 +#define DEBUG_LL_PHYS_BASE 0x10000000 +#define DEBUG_LL_UART_OFFSET 0x00009000 + +#define DEBUG_LL_PHYS_BASE_RS1 0x1c000000 +#define DEBUG_LL_UART_OFFSET_RS1 0x00090000 + +#define DEBUG_LL_VIRT_BASE 0xf8000000 .macro addruart,rp,rv,tmp - mov \rp, #DEBUG_LL_UART_OFFSET - orr \rv, \rp, #0xf8000000 @ virtual base - orr \rp, \rp, #0x10000000 @ physical base + + @ Make an educated guess regarding the memory map: + @ - the original A9 core tile, which has MPCore peripherals + @ located at 0x1e000000, should use UART at 0x10009000 + @ - all other (RS1 complaint) tiles use UART mapped + @ at 0x1c090000 + mrc p15, 4, \tmp, c15, c0, 0 + cmp \tmp, #0x1e000000 + + @ Original memory map + moveq \rp, #DEBUG_LL_UART_OFFSET + orreq \rv, \rp, #DEBUG_LL_VIRT_BASE + orreq \rp, \rp, #DEBUG_LL_PHYS_BASE + + @ RS1 memory map + movne \rp, #DEBUG_LL_UART_OFFSET_RS1 + orrne \rv, \rp, #DEBUG_LL_VIRT_BASE + orrne \rp, \rp, #DEBUG_LL_PHYS_BASE_RS1 + .endm #include diff --git a/arch/arm/mach-vexpress/include/mach/uncompress.h b/arch/arm/mach-vexpress/include/mach/uncompress.h index 7972c5748d0e..7dab5596b868 100644 --- a/arch/arm/mach-vexpress/include/mach/uncompress.h +++ b/arch/arm/mach-vexpress/include/mach/uncompress.h @@ -22,7 +22,27 @@ #define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) #define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) -#define get_uart_base() (0x10000000 + 0x00009000) +#define UART_BASE 0x10009000 +#define UART_BASE_RS1 0x1c090000 + +static unsigned long get_uart_base(void) +{ + unsigned long mpcore_periph; + + /* + * Make an educated guess regarding the memory map: + * - the original A9 core tile, which has MPCore peripherals + * located at 0x1e000000, should use UART at 0x10009000 + * - all other (RS1 complaint) tiles use UART mapped + * at 0x1c090000 + */ + asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (mpcore_periph)); + + if (mpcore_periph == 0x1e000000) + return UART_BASE; + else + return UART_BASE_RS1; +} /* * This does not append a newline diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index dbf055103000..9cab5417e5df 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -486,9 +486,36 @@ MACHINE_END #if defined(CONFIG_ARCH_VEXPRESS_DT) +static struct map_desc v2m_rs1_io_desc __initdata = { + .virtual = V2M_PERIPH, + .pfn = __phys_to_pfn(0x1c000000), + .length = SZ_2M, + .type = MT_DEVICE, +}; + +static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname, + int depth, void *data) +{ + const char **map = data; + + if (strcmp(uname, "motherboard") != 0) + return 0; + + *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL); + + return 1; +} + void __init v2m_dt_map_io(void) { - iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); + const char *map = NULL; + + of_scan_flat_dt(v2m_dt_scan_memory_map, &map); + + if (map && strcmp(map, "rs1") == 0) + iotable_init(&v2m_rs1_io_desc, 1); + else + iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); #if defined(CONFIG_SMP) vexpress_dt_smp_map_io(); @@ -535,6 +562,35 @@ static struct clk_lookup v2m_dt_lookups[] = { .dev_id = "1001f000.clcd", .clk = &osc1_clk, }, + /* RS1 memory map */ + { /* PL180 MMCI */ + .dev_id = "mb:mmci", /* 1c050000.mmci */ + .clk = &osc2_clk, + }, { /* PL050 KMI0 */ + .dev_id = "1c060000.kmi", + .clk = &osc2_clk, + }, { /* PL050 KMI1 */ + .dev_id = "1c070000.kmi", + .clk = &osc2_clk, + }, { /* PL011 UART0 */ + .dev_id = "1c090000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART1 */ + .dev_id = "1c0a0000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART2 */ + .dev_id = "1c0b0000.uart", + .clk = &osc2_clk, + }, { /* PL011 UART3 */ + .dev_id = "1c0c0000.uart", + .clk = &osc2_clk, + }, { /* SP805 WDT */ + .dev_id = "1c0f0000.wdt", + .clk = &v2m_ref_clk, + }, { /* PL111 CLCD */ + .dev_id = "1c1f0000.clcd", + .clk = &osc1_clk, + }, }; void __init v2m_dt_init_early(void) @@ -597,6 +653,10 @@ static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash", &v2m_flash_data), OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data), + /* RS1 memory map */ + OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash", + &v2m_flash_data), + OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data), {} };