From: Rosen Penev Date: Mon, 6 Jan 2020 02:27:08 +0000 (-0800) Subject: scripts/flashing/flash.sh: remove trailing whitespaces X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=69f8983af4665df5c7b9f538e71f97698517b8f9;p=openwrt%2Fstaging%2Fxback.git scripts/flashing/flash.sh: remove trailing whitespaces Signed-off-by: Rosen Penev [cut out of patch with different subject] Signed-off-by: Adrian Schmutzler --- diff --git a/scripts/flashing/flash.sh b/scripts/flashing/flash.sh index 7f2cdf5db9..d568ed5b22 100755 --- a/scripts/flashing/flash.sh +++ b/scripts/flashing/flash.sh @@ -1,6 +1,6 @@ #!/bin/bash # -# tftp flash script for wireless routers +# tftp flash script for wireless routers # # Copyright (C) 2004 by Oleg I. Vdovikin # Copyright (C) 2005 by Waldemar Brodkorb @@ -24,10 +24,10 @@ if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then echo Usage: "$0" firmware vendor cat << EOF IMPORTANT: -Notes for Linksys / Asus WL500gx router: +Notes for Linksys / Asus WL500gx router: be sure you have set boot_wait to yes. Power on your router after executing this script. - + Notes for Asus WL500g router: be sure POWER led is flashing (If this is not the case poweroff the device, push the reset button & power on @@ -54,7 +54,7 @@ echo Confirming IP address setting... echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1 echo Flashing 192.168.1.1 using "$1"... echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1 -echo Please wait until leds stops flashing. +echo Please wait until leds stops flashing. elif [ "$2" = "linksys" ]; then echo Flashing 192.168.1.1 using "$1"... echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1